1511 lines
64 KiB
Plaintext
1511 lines
64 KiB
Plaintext
--===========================================================
|
|
-- Copyright (C) 2003 by H3C TECHNOLOGIES. All rights reserved.
|
|
-- Description: This MIB is excerpted from the draft-ietf-hubmib-efm-epon-mib-02 directly
|
|
--- only changed the object name,added the h3c as prefix.
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History:
|
|
-- V1.0 created by liyue.
|
|
-- Define MODULE-IDENTITY for h3cEponDeviceMIB
|
|
--=================================================================
|
|
H3C-EPON-DEVICE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
h3cEpon
|
|
FROM HUAWEI-3COM-OID-MIB
|
|
MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
|
|
Unsigned32, Integer32, zeroDotZero
|
|
FROM SNMPv2-SMI
|
|
TruthValue, DateAndTime, RowStatus, MacAddress
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM IF-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB;
|
|
|
|
h3cEponDeviceMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200409210000Z" -- September 21, 2004
|
|
ORGANIZATION
|
|
"Hangzhou H3C Tech. Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team Hangzhou H3C Tech. Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip:100085
|
|
"
|
|
DESCRIPTION
|
|
"The objects in this MIB module are used to manage
|
|
Ethernet Passive Optical Network (EPON) devices which
|
|
are based on the Ethernet in the First Mile (EFM) PON
|
|
as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65.
|
|
|
|
This MIB is excerpted from the draft files directly,only
|
|
changed the object name,added the h3c as prefix.
|
|
|
|
The following reference is used throughout this MIB
|
|
module:
|
|
[802.3ah] refers to:
|
|
IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
|
|
Information technology - Telecommunications and
|
|
information exchange between systems - Local and
|
|
metropolitan area networks - Specific requirements -
|
|
Part 3: Carrier sense multiple access with collision
|
|
detection (CSMA/CD) access method and physical layer
|
|
specifications - Media Access Control Parameters,
|
|
Physical Layers and Management Parameters for subscriber
|
|
access networks', 22 April 2004.
|
|
Of particular interest are Clause 64(MPCP) 65(P2mP RS)
|
|
and 60 (PON PMDs). Clause 30, 'Management', and Clause
|
|
45,'Management Data Input/Output (MDIO) Interface'.
|
|
|
|
Copyright (C) The Internet Society (2004). This version
|
|
of this MIB module is part of XXXX see the RFC itself
|
|
for full legal notices."
|
|
|
|
-- Editor's Note: Replace XXXX with the actual RFC number
|
|
-- assigned by RFC Editor and remove this note
|
|
|
|
REVISION "200409210000Z" -- September 21, 2004
|
|
DESCRIPTION "Initial version, published as RFC XXXX."
|
|
|
|
::= { h3cEpon 4 }
|
|
|
|
-- Editor's Note: Replace XXX with a real OID once it is
|
|
-- assigned by IANA and remove this note.
|
|
|
|
h3cEponDeviceObjectMIB OBJECT IDENTIFIER ::= { h3cEponDeviceMIB 1 }
|
|
|
|
h3cEponDeviceObjects OBJECT IDENTIFIER ::= { h3cEponDeviceObjectMIB 1 }
|
|
|
|
h3cEponDeviceConformance OBJECT IDENTIFIER ::= { h3cEponDeviceObjectMIB 2 }
|
|
|
|
h3cEponDeviceControlObjects OBJECT IDENTIFIER ::= { h3cEponDeviceObjects 1 }
|
|
|
|
h3cEponDeviceStatObjects OBJECT IDENTIFIER ::= { h3cEponDeviceObjects 2 }
|
|
|
|
h3cEponDeviceEventObjects OBJECT IDENTIFIER ::= { h3cEponDeviceObjects 3 }
|
|
|
|
|
|
h3cEponDeviceControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponDeviceControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for EPON device MIB modules."
|
|
::= { h3cEponDeviceControlObjects 1 }
|
|
|
|
h3cEponDeviceControlEntry OBJECT-TYPE
|
|
SYNTAX H3cEponDeviceControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the EPON device Control table."
|
|
INDEX { ifIndex }
|
|
::= { h3cEponDeviceControlTable 1 }
|
|
|
|
H3cEponDeviceControlEntry ::=
|
|
SEQUENCE {
|
|
h3cEponDeviceObjectReset INTEGER,
|
|
h3cEponDeviceObjectModes INTEGER,
|
|
h3cEponDeviceObjectFecEnabled INTEGER,
|
|
h3cEponDeviceObjectOamMode INTEGER,
|
|
h3cEponDeviceObjectDeviceReadyMode INTEGER,
|
|
h3cEponDeviceObjectPowerDown TruthValue,
|
|
h3cEponDeviceObjectNumberOfLLIDs Integer32,
|
|
h3cEponDeviceObjectReportThreshold Integer32,
|
|
h3cEponDeviceRemoteMACAddressLLIDControl INTEGER
|
|
}
|
|
|
|
|
|
h3cEponDeviceObjectReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
reset(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to reset the EPON device. The
|
|
interface may be unavailable while the reset occurs and
|
|
data may be lost. During reading operation it returns
|
|
the state of the EPON device. running(1) indicates and
|
|
operates normal operation, reset(2) indicates and
|
|
operates reset mode. Writing can be done all the time."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceControlEntry 1 }
|
|
|
|
h3cEponDeviceObjectModes OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
olt(1),
|
|
onu(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable defines the mode of the EPON device. When
|
|
an olt(1) it is an Optical Line Terminal device (server)
|
|
and when an onu(2) and Optical Network Unit device
|
|
(client)"
|
|
::= { h3cEponDeviceControlEntry 2 }
|
|
|
|
h3cEponDeviceObjectFecEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noFecEnabled (1),
|
|
fecTxEnabled (2),
|
|
fecRxEnabled (3),
|
|
fecTxRxEnabled (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable defines and provides information whether the
|
|
EPON device uses FEC as defined in the [802.3ah] clause
|
|
65.2 for EPON. When noFECEnabled(1) the device does not
|
|
support FEC mode When fecTxEnabled(2) the device supports
|
|
the FEC transmission mode. When fecRxEnabled(3) the device
|
|
supports the FEC Receive mode. When fecTxRxEnabled(4) the
|
|
device supports the FEC transmission and receive mode.
|
|
Writing can be done all the time.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceControlEntry 4 }
|
|
|
|
h3cEponDeviceObjectOamMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOam (1),
|
|
oamServer (2),
|
|
oamclient (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable defines and provides information on the
|
|
Operation Administration and Maintenance (OAM) mode of
|
|
an EPON device as defined by the [802.3ah] clause 57.
|
|
When noOam(1) the device does not supports the OAM mode.
|
|
When oamServer(2) the device supports the OAM mode as a
|
|
server unit. When oamClient(3) the device supports the
|
|
OAM mode as a client unit.
|
|
Writing can be done during initialization,
|
|
h3cEponDeviceObjectDeviceReadyMode is in notReady(1) or
|
|
inProcess(2).
|
|
This attribute is relevant for an OLT and an ONU."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceControlEntry 5 }
|
|
|
|
|
|
h3cEponDeviceObjectDeviceReadyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notReady (1),
|
|
inProcess (2),
|
|
ready (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable defines the mode of an EPON device and
|
|
provides information on the mode in initialization -
|
|
ready for registration as defined by the [802.3ah]
|
|
clause 64.
|
|
When notReady(1) the device is not ready for operation.
|
|
When inProcess(2) the device is in initialization
|
|
process.
|
|
When ready(3) the device is ready for registration.
|
|
Writing can be done all the time.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceControlEntry 6 }
|
|
|
|
h3cEponDeviceObjectPowerDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this variable to True(1) will cause Device to be
|
|
entered into Power down mode where no registration is
|
|
allowed and only receiving data from the link.
|
|
Writing can be done all the time.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceControlEntry 7 }
|
|
|
|
|
|
h3cEponDeviceObjectNumberOfLLIDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read only variable which defines the number of
|
|
registered LLIDs (as defined by the [802.3ah] clause 65)
|
|
in a EPON network for an OLT and an ONU. Initialization
|
|
value is 0.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
::= { h3cEponDeviceControlEntry 8 }
|
|
|
|
h3cEponDeviceObjectReportThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of 8 integers, for each LLID, that defines the
|
|
threshold reporting for each Queue in the REPORT
|
|
message, as defined in [802.3ah] 64. First Queue set
|
|
reporting will provide information on the queue
|
|
occupancy of frames below this Threshold. The value
|
|
returned shall be in Time quanta (TQ) which is 16nsec or
|
|
2 octets increments.
|
|
Writing can be done all the time.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
DEFVAL { 0 }
|
|
::= { h3cEponDeviceControlEntry 9 }
|
|
|
|
h3cEponDeviceRemoteMACAddressLLIDControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
resetLog(2),
|
|
useDefaultReporting(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates and controls the resetting of the LLID MAC
|
|
address log. Setting this object to none(1) has no
|
|
action resetLog(2) empties the LLID MAC address log. All
|
|
data is deleted. Setting it to useDefaultReporting(3)
|
|
returns all entries priorities to their factory-default
|
|
reporting. Reading this object always returns
|
|
useDefaultReporting(3)."
|
|
DEFVAL { 3 }
|
|
::= { h3cEponDeviceControlEntry 10 }
|
|
|
|
h3cEponDeviceRemoteMACAddressLLIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponDeviceRemoteMACAddressLLIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of read-only value that identifies the
|
|
source_address and LLIDs parameter of the remote devices
|
|
in the network. This MacAddress value, as defined in
|
|
[802.3ah], 30.3.5.1.5, is updated on reception of a
|
|
valid frame with a unicast destination Field or
|
|
(1) a destination Field equal to the reserved multicast
|
|
address for MAC Control specified in [802.3ah] Annex
|
|
31A, (2) lengthOrType field value equal to the reserved
|
|
Type for MAC Control as specified in [802.3ah] Annex
|
|
31A. (3)an MPCP subtype value equal to the subtype
|
|
reserved for MPCP as specified in [802.3ah] Annex 31A,
|
|
and an LLID as allocated by the OLT. The table is
|
|
defined as Remote MAC address - LLID (RMadL)
|
|
The table is relevant only for an OLT device, and is
|
|
equivalent from a bridge emulation to the bridge
|
|
port-MAC address table where the LLIDs are equivalent to
|
|
virtual bridge ports."
|
|
::= { h3cEponDeviceControlObjects 2 }
|
|
|
|
|
|
h3cEponDeviceRemoteMACAddressLLIDEntry OBJECT-TYPE
|
|
SYNTAX H3cEponDeviceRemoteMACAddressLLIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group of entries. Applications create and delete
|
|
entries using h3cEponDeviceRMadlEntryStatus.
|
|
When adding objects to an LLID they are added in the
|
|
persistent order of their index in this table."
|
|
INDEX {ifIndex }
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDTable 1 }
|
|
|
|
H3cEponDeviceRemoteMACAddressLLIDEntry ::=
|
|
SEQUENCE {
|
|
h3cEponDeviceRemoteMACAddressLLIDName SnmpAdminString,
|
|
h3cEponDeviceRMadlLLID Unsigned32,
|
|
h3cEponDeviceRMadlLogID OBJECT IDENTIFIER,
|
|
h3cEponDeviceRMadlRemoteAddress MacAddress,
|
|
h3cEponDeviceRMadlType INTEGER,
|
|
h3cEponDeviceRMadlAction INTEGER,
|
|
h3cEponDeviceRMadlEntryStatus RowStatus
|
|
}
|
|
|
|
h3cEponDeviceRemoteMACAddressLLIDName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A locally-unique, administratively assigned name for a
|
|
group of entries."
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 1 }
|
|
|
|
h3cEponDeviceRMadlLLID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary integer for the purpose of identifying the
|
|
LLID. Writing can be done all the time."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 2 }
|
|
|
|
|
|
h3cEponDeviceRMadlLogID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of a MIB module object to add to
|
|
an entry, indicating the entry ID in the table. Writing
|
|
can be done all the time."
|
|
DEFVAL { zeroDotZero }
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 3 }
|
|
|
|
h3cEponDeviceRMadlRemoteAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote MAC address of the LLID.
|
|
Writing can be done all the time."
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 4 }
|
|
|
|
|
|
h3cEponDeviceRMadlType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notRegister (1),
|
|
registered (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of types for entries - LLIDs. Indicates and
|
|
defines the state of registration. notRegister(1) marks
|
|
a non registered LID, registered(2) marks a registered
|
|
LLID. Writing can be done all the time."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 5 }
|
|
|
|
h3cEponDeviceRMadlAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
register (2),
|
|
deregister (3),
|
|
reregister (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of actions for an entry - LLID. Indicates and
|
|
defines the state of registration for the remote device.
|
|
none(1) marks no action, register(2) marks to register
|
|
an LLID, deregister(3) marks to deregister an LLID,
|
|
reregister(4) marks reregistered LLID.
|
|
Writing can be done all the time."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 6 }
|
|
|
|
|
|
h3cEponDeviceRMadlEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows creation and deletion of
|
|
entries. Once made active an entry MAY not be modified
|
|
except to delete it."
|
|
::= { h3cEponDeviceRemoteMACAddressLLIDEntry 7 }
|
|
|
|
|
|
--Statistics tables
|
|
|
|
|
|
h3cEponDeviceStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponDeviceStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the list of statistics counters of
|
|
EPON devices. The attributes are relevant for an OLT and
|
|
an ONU."
|
|
::= { h3cEponDeviceStatObjects 1 }
|
|
|
|
h3cEponDeviceStatEntry OBJECT-TYPE
|
|
SYNTAX H3cEponDeviceStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entries for Table of statistics counters of EPON
|
|
devices."
|
|
INDEX { ifIndex }
|
|
::= { h3cEponDeviceStatTable 1 }
|
|
|
|
H3cEponDeviceStatEntry ::=
|
|
SEQUENCE {
|
|
h3cEponDeviceStatTxFramesQueue0 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue1 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue2 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue3 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue4 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue5 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue6 Counter32,
|
|
h3cEponDeviceStatTxFramesQueue7 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue0 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue1 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue2 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue3 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue4 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue5 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue6 Counter32,
|
|
h3cEponDeviceStatRxFramesQueue7 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue0 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue1 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue2 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue3 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue4 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue5 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue6 Counter32,
|
|
h3cEponDeviceStatDroppedFramesQueue7 Counter32
|
|
}
|
|
|
|
|
|
h3cEponDeviceStatTxFramesQueue0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-0- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-0-.
|
|
The -Queue-0- marking matched the REPORT MPCP message
|
|
Queue-0 field, as defined in [802.3ah] clause 64. This
|
|
counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 1 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-1- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-1-.
|
|
The -Queue-1- marking matched the REPORT MPCP message
|
|
Queue-1 field, as defined in [802.3ah] clause 64. This
|
|
counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 2 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-2- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-2-.
|
|
The -Queue-2- marking matched the REPORT MPCP message
|
|
Queue-2 field, as defined in [802.3ah] clause 64. This
|
|
counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 3 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-3- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-3-.
|
|
The -Queue-3- marking matched the REPORT MPCP message
|
|
Queue-3 field, as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 4 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-4- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-4-.
|
|
The -Queue-4- marking matched the REPORT MPCP message
|
|
Queue-4 field, as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 5 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-5- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-5-.
|
|
The -Queue-5- marking matched the REPORT MPCP message
|
|
Queue-5 field, as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 6 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-6- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-6-.
|
|
The -Queue-6- marking matched the REPORT MPCP message
|
|
Queue-6 field, as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 7 }
|
|
|
|
h3cEponDeviceStatTxFramesQueue7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-7- frames
|
|
transmission occurs. Increment the counter by one for
|
|
each frame transmitted which is an output of -Queue-7-.
|
|
The -Queue-7- marking matched the REPORT MPCP message
|
|
Queue-7 field, as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 8 }
|
|
|
|
h3cEponDeviceStatRxFramesQueue0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-0- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-0-. The -Queue-0-
|
|
marking matched the REPORT MPCP message Queue-0 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 9 }
|
|
|
|
h3cEponDeviceStatRxFramesQueue1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-1- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-1-. The -Queue-1-
|
|
marking matched the REPORT MPCP message Queue-1 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 10 }
|
|
|
|
|
|
h3cEponDeviceStatRxFramesQueue2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-2- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-2-. The -Queue-2-
|
|
marking matched the REPORT MPCP message Queue-2 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 11 }
|
|
|
|
h3cEponDeviceStatRxFramesQueue3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-3- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-3-. The -Queue-3-
|
|
marking matched the REPORT MPCP message Queue-3 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 12 }
|
|
|
|
h3cEponDeviceStatRxFramesQueue4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-4- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-4-. The -Queue-4-
|
|
marking matched the REPORT MPCP message Queue-4 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 13 }
|
|
|
|
|
|
h3cEponDeviceStatRxFramesQueue5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-5- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-5-. The -Queue-5-
|
|
marking matched the REPORT MPCP message Queue-5 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 14 }
|
|
|
|
h3cEponDeviceStatRxFramesQueue6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-6- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-6-. The -Queue-6-
|
|
marking matched the REPORT MPCP message Queue-6 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 15 }
|
|
|
|
h3cEponDeviceStatRxFramesQueue7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-7- frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each frame received for each
|
|
LLID, which is an output of -Queue-7-. The -Queue-7-
|
|
marking matched the REPORT MPCP message Queue-7 field,
|
|
as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and an OLT."
|
|
::= { h3cEponDeviceStatEntry 16 }
|
|
|
|
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-0- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-0-. The -Queue-0- marking matched
|
|
the REPORT MPCP message Queue-0 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 17 }
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-1- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-1-. The -Queue-1- marking matched
|
|
the REPORT MPCP message Queue-1 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 18 }
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-2- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-2-. The -Queue-2- marking matched
|
|
the REPORT MPCP message Queue-2 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 19 }
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-3- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-3-. The -Queue-3- marking matched
|
|
the REPORT MPCP message Queue-3 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 20}
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-4- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-4-. The -Queue-4- marking matched
|
|
the REPORT MPCP message Queue-4 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 21 }
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-5- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-5-. The -Queue-5- marking matched
|
|
the REPORT MPCP message Queue-5 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 22 }
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-6- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-6-. The -Queue-6- marking matched
|
|
the REPORT MPCP message Queue-6 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 23 }
|
|
|
|
h3cEponDeviceStatDroppedFramesQueue7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a -Queue-7- frames drops
|
|
occurs. Increment the counter by one for each frame
|
|
dropped from -Queue-7-. The -Queue-7- marking matched
|
|
the REPORT MPCP message Queue-7 field, as defined in
|
|
[802.3ah] clause 64.
|
|
This counter is mandatory for an ONU."
|
|
::= { h3cEponDeviceStatEntry 24 }
|
|
|
|
--Editor's Note use reference to event MIB modules [RFC2981] and
|
|
--docsis MIB modules [RFC2669]
|
|
|
|
|
|
h3cEponDeviceEventObjectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponDeviceEventObjectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the Event Objects for EPON devices.
|
|
The attributes are relevant for an OLT and an ONU."
|
|
::= { h3cEponDeviceEventObjects 1 }
|
|
|
|
h3cEponDeviceEventObjectEntry OBJECT-TYPE
|
|
SYNTAX H3cEponDeviceEventObjectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entries for Table of Event objects for EPON
|
|
devices."
|
|
INDEX { ifIndex }
|
|
::= { h3cEponDeviceEventObjectTable 1 }
|
|
|
|
H3cEponDeviceEventObjectEntry ::=
|
|
SEQUENCE {
|
|
h3cEponDeviceSampleMinimum Integer32,
|
|
h3cEponDeviceDyingGaspAlarmState TruthValue,
|
|
h3cEponDeviceDyingGaspAlarmEnabled TruthValue,
|
|
h3cEponDeviceCriticalEventState TruthValue,
|
|
h3cEponDeviceCriticalEventEnabled TruthValue,
|
|
h3cEponDeviceLocalLinkFaultAlarmState TruthValue,
|
|
h3cEponDeviceLocalLinkFaultAlarmEnabled TruthValue,
|
|
h3cEponDeviceTemperatureEventIndicationState TruthValue,
|
|
h3cEponDeviceTemperatureEventIndicationEnabled TruthValue,
|
|
h3cEponDevicePowerVoltageEventIndicationState TruthValue,
|
|
h3cEponDevicePowerVoltageEventIndicationEnabled TruthValue,
|
|
h3cEponDeviceGlobalEventState TruthValue,
|
|
h3cEponDeviceGlobalEventEnabled TruthValue,
|
|
h3cEponDeviceErroredSymbolPeriodEventState TruthValue,
|
|
h3cEponDeviceErroredSymbolPeriodEventEnabled TruthValue,
|
|
h3cEponDeviceErroredFrameEventState TruthValue,
|
|
h3cEponDeviceErroredFrameEventEnabled TruthValue,
|
|
h3cEponDeviceErroredFramePeriodEventState TruthValue,
|
|
h3cEponDeviceErroredFramePeriodEventEnabled TruthValue,
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventState TruthValue,
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventEnabled TruthValue,
|
|
h3cEponDeviceOrganizationSpecificEventState TruthValue,
|
|
h3cEponDeviceOrganizationSpecificEventEnabled TruthValue,
|
|
h3cEponDeviceEventControl INTEGER
|
|
}
|
|
|
|
h3cEponDeviceSampleMinimum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum Frequency of events this system will accept.
|
|
A system may use the larger values of this minimum to
|
|
lessen the impact of constant sampling. For larger
|
|
sampling intervals the system samples less often and
|
|
suffers less overhead.
|
|
Unless explicitly resource limited, a system's value for
|
|
this object SHOULD be 1, allowing as small as a 1 second
|
|
interval for ongoing trigger sampling.
|
|
Writing of the value can be done all the time."
|
|
DEFVAL { 1 }
|
|
::= { h3cEponDeviceEventObjectEntry 1 }
|
|
|
|
h3cEponDeviceDyingGaspAlarmState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Dying Gasp indication of the OAM alarm indications as
|
|
described in the [802.3ah] clause 57. When true the
|
|
device has a dying gasp alarm asserted. When false the
|
|
dying gasp alarm is reset "
|
|
::= { h3cEponDeviceEventObjectEntry 2 }
|
|
|
|
|
|
|
|
h3cEponDeviceDyingGaspAlarmEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow DyingGaspAlarm event to be used.
|
|
When the value is true the event is sampled. When the
|
|
value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 3 }
|
|
|
|
h3cEponDeviceCriticalEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Critical Event indication of the OAM alarm indications
|
|
as described in the [802.3ah] clause 57. When true the
|
|
device has a Critical Event asserted. When false the
|
|
Critical Event is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 4 }
|
|
|
|
h3cEponDeviceCriticalEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow CriticalEvent event to be used. When
|
|
the value is true the event is sampled. When the value
|
|
is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 5 }
|
|
|
|
|
|
h3cEponDeviceLocalLinkFaultAlarmState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Local Link Fault indication of the OAM alarm indications
|
|
as described in the [802.3ah] clause 57. When true the
|
|
device has a Local Link Fault alarm asserted. When
|
|
false the Local Link Fault alarm is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 6 }
|
|
|
|
|
|
|
|
h3cEponDeviceLocalLinkFaultAlarmEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow LocalLinkFaultAlarm event to be used.
|
|
When the value is true the event is sampled. When the
|
|
value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 7 }
|
|
|
|
|
|
h3cEponDeviceTemperatureEventIndicationState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Temperature Event indication of an EPON device. When
|
|
condition of box temperature is above the threshold
|
|
defined the alarm is asserted. When the condition is
|
|
below that threshold the alarm is de-asserted. When true
|
|
the device has a Temperature Event Indication asserted.
|
|
When false the Temperature Event Indication is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 8 }
|
|
|
|
h3cEponDeviceTemperatureEventIndicationEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow TemperatureEventIndication event to
|
|
be used. When the value is true the event is sampled.
|
|
When the value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 9 }
|
|
|
|
h3cEponDevicePowerVoltageEventIndicationState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Power/Voltage Event Indication of an EPON device. When
|
|
condition of box Power/voltage is above the threshold
|
|
defined the alarm is asserted. When the condition is
|
|
below that threshold the alarm is de-asserted. When true
|
|
the device has a Power/Voltage Event Indication
|
|
asserted. When false the Power/Voltage Event Indication
|
|
is reset. "
|
|
::= { h3cEponDeviceEventObjectEntry 10 }
|
|
|
|
|
|
h3cEponDevicePowerVoltageEventIndicationEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow PowerVoltageEventIndication event to
|
|
be used. When the value is true the event is sampled.
|
|
When the value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 11 }
|
|
|
|
|
|
h3cEponDeviceGlobalEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Global Event indication of an EPON device. When the
|
|
indication of the event input occurs the event is
|
|
asserted. When the input is removed that event is
|
|
de-asserted. When true the device has a Global Event
|
|
asserted. When false the Global Event Indication is
|
|
reset."
|
|
::= { h3cEponDeviceEventObjectEntry 12 }
|
|
|
|
h3cEponDeviceGlobalEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow GlobalEvent event to be used. When
|
|
the value is true the event is sampled. When the value
|
|
is false the event is not sampled. Writing can be done
|
|
all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 13 }
|
|
|
|
h3cEponDeviceErroredSymbolPeriodEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Errored Symbol Period Event indication of the OAM alarm
|
|
TLV indications as described in the [802.3ah]
|
|
clause 57.5.3. When true the device has an Errored
|
|
Symbol Period Event asserted. When false the Errored
|
|
Symbol Period Event is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 14 }
|
|
|
|
h3cEponDeviceErroredSymbolPeriodEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow ErroredSymbolPeriodEvent event to be
|
|
used. When the value is true the event is sampled. When
|
|
the value is false the event is not sampled. Writing can
|
|
be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 15 }
|
|
|
|
h3cEponDeviceErroredFrameEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Errored Frame Event indication of the OAM alarm TLV
|
|
indications as described in the [802.3ah] clause 57.5.3.
|
|
When true the device has an Errored Frame Event
|
|
asserted. When false the Errored Frame Event is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 16 }
|
|
|
|
h3cEponDeviceErroredFrameEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow ErroredFrameEvent event to be used.
|
|
When the value is true the event is sampled. When the
|
|
value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 17 }
|
|
|
|
|
|
h3cEponDeviceErroredFramePeriodEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Errored Frame Period Event indication of the OAM alarm
|
|
TLV indications as described in the [802.3ah] clause
|
|
57.5.3. When true the device has an Errored Frame Period
|
|
Event asserted. When false the Errored Frame Period
|
|
Event is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 18 }
|
|
|
|
h3cEponDeviceErroredFramePeriodEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow ErroredFramePeriodEvent event to be
|
|
used. When the value is true the event is sampled. When
|
|
the value is false the event is not sampled. Writing can
|
|
be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 19 }
|
|
|
|
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Errored Frame Seconds Summary Event indication of the
|
|
OAM alarm TLV indications as described in the [802.3ah]
|
|
clause 57.5.3. When true the device has an Errored Frame
|
|
Seconds Summary Event asserted. When false the Errored
|
|
Frame Seconds Summary Event is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 20 }
|
|
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow ErroredFrameSecondsSummaryEvent event
|
|
to be used. When the value is true the event is sampled.
|
|
When the value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 21 }
|
|
|
|
|
|
h3cEponDeviceOrganizationSpecificEventState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only variable, which defines the state of the
|
|
Organization Specific Event indication of the OAM alarm
|
|
TLV indications as described in the [802.3ah] clause
|
|
57.5.3. When true the device has an Organization
|
|
Specific Event asserted. When false the Organization
|
|
Specific Event is reset."
|
|
::= { h3cEponDeviceEventObjectEntry 22 }
|
|
|
|
h3cEponDeviceOrganizationSpecificEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow OrganizationSpecificEvent event to be
|
|
used. When the value is true the event is sampled. When
|
|
the value is false the event is not sampled.
|
|
Writing can be done all the time."
|
|
DEFVAL { false }
|
|
::= { h3cEponDeviceEventObjectEntry 23 }
|
|
|
|
h3cEponDeviceEventControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
resetLog(2),
|
|
useDefaultReporting(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates and controls the resetting of the Event log.
|
|
Setting this object to none(1) has no action resetLog(2)
|
|
empties the event log. All data is deleted. Setting it
|
|
to useDefaultReporting(3) returns all event priorities
|
|
to their factory-default reporting. Reading this object
|
|
always returns useDefaultReporting(3)."
|
|
DEFVAL { 3 }
|
|
::= { h3cEponDeviceEventObjectEntry 24 }
|
|
|
|
|
|
|
|
-- Events Log Table
|
|
|
|
h3cEponDeviceEventsLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponDeviceEventsLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects provides a log of notification based
|
|
on the event as pointed to by entries in those tables.
|
|
The intent is a MAC level event log (set of events to
|
|
when they happened).
|
|
This attribute is relevant for an OLT and an ONU."
|
|
::= { h3cEponDeviceEventObjects 2 }
|
|
|
|
h3cEponDeviceEventsLogEntry OBJECT-TYPE
|
|
SYNTAX H3cEponDeviceEventsLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group of Events. Applications create and delete
|
|
entries using h3cEponDeviceEventsEntryStatus. When adding
|
|
objects to a notification they are added in the lexical
|
|
order of their index in this table."
|
|
INDEX { h3cEponDeviceEventsLogName, h3cEponDeviceEventsLogIndex }
|
|
::= { h3cEponDeviceEventsLogTable 1 }
|
|
|
|
H3cEponDeviceEventsLogEntry ::=
|
|
SEQUENCE {
|
|
h3cEponDeviceEventsLogName SnmpAdminString,
|
|
h3cEponDeviceEventsLogIndex Unsigned32,
|
|
h3cEponDeviceEventsLogID OBJECT IDENTIFIER,
|
|
h3cEponDeviceEventsLogFirstTime DateAndTime,
|
|
h3cEponDeviceEventsLogLastTime DateAndTime,
|
|
h3cEponDeviceEventsLogCounts Counter32,
|
|
h3cEponDeviceEventsLogType INTEGER,
|
|
h3cEponDeviceEventsLogEntryStatus RowStatus
|
|
}
|
|
|
|
h3cEponDeviceEventsLogName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A locally-unique, administratively assigned name for a
|
|
group of Events."
|
|
::= { h3cEponDeviceEventsLogEntry 1 }
|
|
|
|
h3cEponDeviceEventsLogIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary integer for the purpose of identifying
|
|
individual Events within a h3cEponDeviceEventsLogName
|
|
group. Events within a group are placed in the
|
|
notification in the numerical order of this index."
|
|
::= { h3cEponDeviceEventsLogEntry 2 }
|
|
|
|
h3cEponDeviceEventsLogID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of a MIB module object to add to a
|
|
Notification that results from the event.
|
|
Writing can be done all the time."
|
|
DEFVAL { zeroDotZero }
|
|
::= { h3cEponDeviceEventsLogEntry 3 }
|
|
|
|
h3cEponDeviceEventsLogFirstTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time that an entry was created."
|
|
::= { h3cEponDeviceEventsLogEntry 4 }
|
|
|
|
h3cEponDeviceEventsLogLastTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If multiple events are reported via the same entry, the
|
|
time that the last event for this entry occurred,
|
|
otherwise this should have the same value as
|
|
h3cEponDeviceEventsLogFirstTime."
|
|
::= { h3cEponDeviceEventsLogEntry 5 }
|
|
|
|
h3cEponDeviceEventsLogCounts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of consecutive event instances reported by
|
|
this entry. This starts at 1 with the creation of this
|
|
row and increments by 1 for each subsequent duplicate
|
|
event."
|
|
::= { h3cEponDeviceEventsLogEntry 6 }
|
|
|
|
h3cEponDeviceEventsLogType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
h3cEponDeviceDyingGaspAlarmState (1),
|
|
h3cEponDeviceCriticalEventState (2),
|
|
h3cEponDeviceLocalLinkFaultAlarmState (3),
|
|
h3cEponDeviceTemperatureEventIndicationState (4),
|
|
h3cEponDevicePowerVoltageEventIndicationState (5),
|
|
h3cEponDeviceGlobalEventState (6),
|
|
h3cEponDeviceErroredSymbolPeriodEventState (7),
|
|
h3cEponDeviceErroredFrameEventState (8),
|
|
h3cEponDeviceErroredFramePeriodEventState (9),
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventState (10),
|
|
h3cEponDeviceOrganizationSpecificEventState (11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of types for Events. Events are ordered according
|
|
to their significance where 1 is the highest severity.
|
|
h3cEponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp
|
|
Alarm State,
|
|
h3cEponDeviceCriticalEventState(2) indicates a Critical
|
|
Event State,
|
|
h3cEponDeviceLocalLinkFaultAlarmState(3) indicates a Local
|
|
Link Fault Alarm State,
|
|
h3cEponDeviceTemperatureEventIndicationState(4) indicates a
|
|
Temperature Event Indication State,
|
|
h3cEponDevicePowerVoltageEventIndicationState(5) indicates
|
|
a Power Voltage Event Indication State,
|
|
h3cEponDeviceGlobalEventState(6) indicates a Global Event
|
|
State,
|
|
h3cEponDeviceErroredSymbolPeriodEventState(7) indicates an
|
|
Errored Symbol Period Event State,
|
|
h3cEponDeviceErroredFrameEventState(8) indicates an Errored
|
|
Frame Event State,
|
|
h3cEponDeviceErroredFramePeriodEventState(9) indicates an
|
|
Errored Frame Period Event State,
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventState(10)
|
|
indicates an Errored Frame Seconds Summary Event State,
|
|
h3cEponDeviceOrganizationSpecificEventState(11) indicates
|
|
an Organization Specific Event State. "
|
|
::= { h3cEponDeviceEventsLogEntry 7 }
|
|
|
|
|
|
h3cEponDeviceEventsLogEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows creation and deletion of
|
|
entries. Once made active an entry MAY not be modified
|
|
except to delete it."
|
|
::= { h3cEponDeviceEventsLogEntry 8 }
|
|
|
|
|
|
|
|
|
|
-- Conformance Statements
|
|
|
|
-- Conformance Groups
|
|
|
|
h3cEponDeviceGroups OBJECT IDENTIFIER ::= { h3cEponDeviceConformance 1 }
|
|
|
|
h3cEponDeviceGroupControl OBJECT-GROUP
|
|
OBJECTS {
|
|
h3cEponDeviceObjectReset,
|
|
h3cEponDeviceObjectModes,
|
|
h3cEponDeviceObjectFecEnabled,
|
|
h3cEponDeviceObjectOamMode,
|
|
h3cEponDeviceObjectDeviceReadyMode,
|
|
h3cEponDeviceObjectPowerDown,
|
|
h3cEponDeviceObjectNumberOfLLIDs,
|
|
h3cEponDeviceObjectReportThreshold,
|
|
h3cEponDeviceRemoteMACAddressLLIDControl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of h3cEponDevice control
|
|
definition."
|
|
::= { h3cEponDeviceGroups 1 }
|
|
|
|
|
|
h3cEponDeviceGroupRMadLTable OBJECT-GROUP
|
|
OBJECTS {
|
|
h3cEponDeviceRMadlLLID,
|
|
h3cEponDeviceRMadlLogID,
|
|
h3cEponDeviceRMadlRemoteAddress,
|
|
h3cEponDeviceRMadlType,
|
|
h3cEponDeviceRMadlAction,
|
|
h3cEponDeviceRMadlEntryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of h3cEponDevice remote Mac address
|
|
to LLID table."
|
|
::= { h3cEponDeviceGroups 2 }
|
|
|
|
|
|
h3cEponDeviceGroupStat OBJECT-GROUP
|
|
OBJECTS {
|
|
h3cEponDeviceStatTxFramesQueue0,
|
|
h3cEponDeviceStatTxFramesQueue1,
|
|
h3cEponDeviceStatTxFramesQueue2,
|
|
h3cEponDeviceStatTxFramesQueue3,
|
|
h3cEponDeviceStatTxFramesQueue4,
|
|
h3cEponDeviceStatTxFramesQueue5,
|
|
h3cEponDeviceStatTxFramesQueue6,
|
|
h3cEponDeviceStatTxFramesQueue7,
|
|
h3cEponDeviceStatRxFramesQueue0,
|
|
h3cEponDeviceStatRxFramesQueue1,
|
|
h3cEponDeviceStatRxFramesQueue2,
|
|
h3cEponDeviceStatRxFramesQueue3,
|
|
h3cEponDeviceStatRxFramesQueue4,
|
|
h3cEponDeviceStatRxFramesQueue5,
|
|
h3cEponDeviceStatRxFramesQueue6,
|
|
h3cEponDeviceStatRxFramesQueue7,
|
|
h3cEponDeviceStatDroppedFramesQueue0,
|
|
h3cEponDeviceStatDroppedFramesQueue1,
|
|
h3cEponDeviceStatDroppedFramesQueue2,
|
|
h3cEponDeviceStatDroppedFramesQueue3,
|
|
h3cEponDeviceStatDroppedFramesQueue4,
|
|
h3cEponDeviceStatDroppedFramesQueue5,
|
|
h3cEponDeviceStatDroppedFramesQueue6,
|
|
h3cEponDeviceStatDroppedFramesQueue7
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of EPON device Statistics"
|
|
::= { h3cEponDeviceGroups 3 }
|
|
|
|
|
|
|
|
h3cEponDeviceGroupEvent OBJECT-GROUP
|
|
OBJECTS {
|
|
h3cEponDeviceSampleMinimum,
|
|
h3cEponDeviceDyingGaspAlarmState,
|
|
h3cEponDeviceDyingGaspAlarmEnabled,
|
|
h3cEponDeviceCriticalEventState,
|
|
h3cEponDeviceCriticalEventEnabled,
|
|
h3cEponDeviceLocalLinkFaultAlarmState,
|
|
h3cEponDeviceLocalLinkFaultAlarmEnabled,
|
|
h3cEponDeviceTemperatureEventIndicationState,
|
|
h3cEponDeviceTemperatureEventIndicationEnabled,
|
|
h3cEponDevicePowerVoltageEventIndicationState,
|
|
h3cEponDevicePowerVoltageEventIndicationEnabled,
|
|
h3cEponDeviceGlobalEventState,
|
|
h3cEponDeviceGlobalEventEnabled,
|
|
h3cEponDeviceErroredSymbolPeriodEventState,
|
|
h3cEponDeviceErroredSymbolPeriodEventEnabled,
|
|
h3cEponDeviceErroredFrameEventState,
|
|
h3cEponDeviceErroredFrameEventEnabled,
|
|
h3cEponDeviceErroredFramePeriodEventState ,
|
|
h3cEponDeviceErroredFramePeriodEventEnabled ,
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventState ,
|
|
h3cEponDeviceErroredFrameSecondsSummaryEventEnabled,
|
|
h3cEponDeviceOrganizationSpecificEventState ,
|
|
h3cEponDeviceOrganizationSpecificEventEnabled,
|
|
h3cEponDeviceEventControl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for EPON device Events"
|
|
::= { h3cEponDeviceGroups 4 }
|
|
|
|
h3cEponDeviceGroupEventLog OBJECT-GROUP
|
|
OBJECTS {
|
|
h3cEponDeviceEventsLogID,
|
|
h3cEponDeviceEventsLogFirstTime,
|
|
h3cEponDeviceEventsLogLastTime,
|
|
h3cEponDeviceEventsLogCounts,
|
|
h3cEponDeviceEventsLogType,
|
|
h3cEponDeviceEventsLogEntryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for EPON device Events log"
|
|
::= { h3cEponDeviceGroups 5 }
|
|
|
|
|
|
-- Compliance
|
|
|
|
h3cEponDeviceCompliances OBJECT IDENTIFIER ::= { h3cEponDeviceConformance 2 }
|
|
|
|
h3cEponDeviceCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for EPON Devices."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { h3cEponDeviceGroupControl }
|
|
GROUP h3cEponDeviceGroupRMadLTable
|
|
DESCRIPTION " This group is mandatory for all
|
|
OLT EPON devices supporting LLID-MAC
|
|
address table."
|
|
|
|
GROUP h3cEponDeviceGroupStat
|
|
DESCRIPTION "This group is mandatory for all EPON devices
|
|
supporting interfaces for Statistics collection."
|
|
|
|
GROUP h3cEponDeviceGroupEvent
|
|
DESCRIPTION "This group is mandatory for all EPON devices
|
|
supporting interfaces for event collection."
|
|
|
|
GROUP h3cEponDeviceGroupEventLog
|
|
DESCRIPTION "This group is mandatory for all EPON devices
|
|
supporting interfaces for event log collection."
|
|
|
|
::= { h3cEponDeviceCompliances 1 }
|
|
|
|
|
|
|
|
END
|