WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/fscom/FS-RRM-MIB

3478 lines
111 KiB
Plaintext
Raw Permalink Blame History

-- *******************************************************************
-- FS-RRM-MIB.mib : FS RRM MIB file
-- November 2009, chenmingjin
--
-- Copyright (c) 2009 by FS.COM Inc..
-- All rights reserved.
-- *******************************************************************
FS-RRM-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress,
OBJECT-TYPE,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
MacAddress,
DisplayString,
TruthValue
FROM SNMPv2-TC
NOTIFICATION-GROUP,
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
fsMgmt
FROM FS-SMI;
--********************************************************************
-- MODULE IDENTITY
--********************************************************************
fsRrmMIB MODULE-IDENTITY
LAST-UPDATED "200912150000Z"
ORGANIZATION "FS.COM Inc.."
CONTACT-INFO
"
Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html"
DESCRIPTION
"This module defines wlan rrm mibs."
REVISION "200912150000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 63 }
--********************** define the Rrm root nodes ***************************
fsRrmMIBObjects OBJECT IDENTIFIER ::= { fsRrmMIB 1 }
fsRrmMIBTraps OBJECT IDENTIFIER ::= { fsRrmMIB 2 }
fsRrmMIBConformance OBJECT IDENTIFIER ::= { fsRrmMIB 3 }
--***************** define the fsRrmMIBObjects nodes *********************
fsRrmObjectsGroup OBJECT IDENTIFIER ::= { fsRrmMIBObjects 1 }
fsRrmObjectsDot11a OBJECT IDENTIFIER ::= { fsRrmMIBObjects 2 }
fsRrmObjectsDot11b OBJECT IDENTIFIER ::= { fsRrmMIBObjects 3 }
fsRrmObjectsAP OBJECT IDENTIFIER ::= { fsRrmMIBObjects 4 }
--***************** define the fsRrmObjectsDot11a nodes *****************
fsRrmDCADot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 1 }
fsRrmTPCDot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 2 }
fsRrmCHDDot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 3 }
fsRrmGroupDot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 4 }
fsRrmProfileDot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 5 }
fsRrmMonitorDot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 6 }
fsRrmFactoryDot11a OBJECT IDENTIFIER ::= { fsRrmObjectsDot11a 7 }
--***************** define the fsRrmObjectsDot11a nodes *****************
fsRrmDCADot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 1 }
fsRrmTPCDot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 2 }
fsRrmCHDDot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 3 }
fsRrmGroupDot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 4 }
fsRrmProfileDot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 5 }
fsRrmMonitorDot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 6 }
fsRrmFactoryDot11b OBJECT IDENTIFIER ::= { fsRrmObjectsDot11b 7 }
--********************************************************************
-- **
-- Rf group name **
-- **
--********************************************************************
fsRrmRFNetworkName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..19))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RF Network Group Name to which this FS Switch belongs.
Airespace Switches on a network form a RF Network Group as
well as a Mobility Group. RF Network Groups does the channel
and power management of AP while Mobility Group does load
balancing and hand off for clients."
::= { fsRrmObjectsGroup 1 }
--********************************************************************
-- **
-- AP Profile Display **
-- **
--********************************************************************
ProfileState ::= INTEGER { pass (1), fail (0) }
fsRrmAPIfSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmObjectsAP 1 }
fsRrmAPName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name assigned to this AP. If an AP is not configured its
factory default name will be ap:<last three byte of
MACAddress> eg. ap:af:12:be"
::= { fsRrmObjectsAP 2 }
--********************************************************************
-- * Begin of fsRrmAPIfProfileThresholdConfigTable
--********************************************************************
fsRrmAPIfProfileThresholdConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfProfileThresholdConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of attributes for various thresholds to be
set on each Airespace AP Interface for Load
performance profile , interference performance
profile and Noise performance profile."
::= { fsRrmObjectsAP 3 }
fsRrmAPIfProfileThresholdConfigEntry OBJECT-TYPE
SYNTAX FSRrmAPIfProfileThresholdConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Phy Thresholds
Table. Entries in this MIB are indexed by
fsRrmAPDot3MacAddress and fsRrmAPIfSlotId"
INDEX { fsRrmAPIfThresholdMacAddr, fsRrmAPIfThresholdRadioType }
::= { fsRrmAPIfProfileThresholdConfigTable 1 }
FSRrmAPIfProfileThresholdConfigEntry ::=
SEQUENCE {
fsRrmAPIfThresholdMacAddr MacAddress,
fsRrmAPIfThresholdRadioType INTEGER,
fsRrmAPIfThresholdName DisplayString,
fsRrmAPIfForeignInterferenceThreshold INTEGER,
fsRrmAPIfForeignNoiseThreshold INTEGER,
fsRrmAPIfRFUtilizationThreshold INTEGER,
fsRrmAPIfThroughputThreshold Unsigned32,
fsRrmAPIfMobilesThreshold INTEGER,
fsRrmAPIfForeignGlobalConfig INTEGER,
fsRrmAPIfNoiseGlobalConfig INTEGER,
fsRrmAPIfRFUtilizationGlobalConfig INTEGER,
fsRrmAPIfThroughputGlobalConfig INTEGER,
fsRrmAPIfMobilesGlobalConfig INTEGER
}
fsRrmAPIfThresholdRadioType OBJECT-TYPE
SYNTAX INTEGER {type80211a(0),type80211b(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio type, type 802.11b means 2.4GHz, type 802.11a means 5GHz,"
::= {fsRrmAPIfProfileThresholdConfigEntry 1 }
fsRrmAPIfForeignInterferenceThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"foreign interference threshold between 1 and 100 percent."
::= {fsRrmAPIfProfileThresholdConfigEntry 2 }
fsRrmAPIfForeignNoiseThreshold OBJECT-TYPE
SYNTAX INTEGER(-127..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"foreign noise threshold between -127 and 0 dBm."
::= {fsRrmAPIfProfileThresholdConfigEntry 3 }
fsRrmAPIfRFUtilizationThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RF utlization threshold between 1 and 100 percent."
::= {fsRrmAPIfProfileThresholdConfigEntry 4 }
fsRrmAPIfThroughputThreshold OBJECT-TYPE
SYNTAX Unsigned32(1000..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Airespace AP data-rate threshold between 1000 and 1000000000."
::= {fsRrmAPIfProfileThresholdConfigEntry 5 }
fsRrmAPIfMobilesThreshold OBJECT-TYPE
SYNTAX INTEGER(1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Airespace AP mobiles threshold between 1 and 128."
::= {fsRrmAPIfProfileThresholdConfigEntry 6 }
fsRrmAPIfThresholdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfProfileThresholdConfigEntry 7 }
fsRrmAPIfThresholdMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfProfileThresholdConfigEntry 8 }
fsRrmAPIfForeignGlobalConfig OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interference threshold inherited from global or not, 1: global config, 0: ap config"
::= { fsRrmAPIfProfileThresholdConfigEntry 9 }
fsRrmAPIfNoiseGlobalConfig OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Noise threshold inherited from global or not, 1: global config, 0: ap config"
::= { fsRrmAPIfProfileThresholdConfigEntry 10 }
fsRrmAPIfRFUtilizationGlobalConfig OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RFUtilization threshold inherited from global or not, 1: global config, 0: ap config"
::= { fsRrmAPIfProfileThresholdConfigEntry 11 }
fsRrmAPIfThroughputGlobalConfig OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Throughput threshold inherited from global or not, 1: global config, 0: ap config"
::= { fsRrmAPIfProfileThresholdConfigEntry 12 }
fsRrmAPIfMobilesGlobalConfig OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mobiles threshold inherited from global or not, 1: global config, 0: ap config"
::= { fsRrmAPIfProfileThresholdConfigEntry 13 }
--********************************************************************
-- * Begin of fsRrmAPIfLoadParametersTable
--********************************************************************
fsRrmAPIfLoadParametersTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfLoadParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These are RRM performance related read only parameters
per Airespace AP"
::= { fsRrmObjectsAP 4 }
fsRrmAPIfLoadParametersEntry OBJECT-TYPE
SYNTAX FSRrmAPIfLoadParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by
fsRrmAPDot3MacAddress and fsRrmAPIfSlotId"
INDEX { fsRrmAPIfLoadMacAddr, fsRrmAPIfLoadSlotId }
::= { fsRrmAPIfLoadParametersTable 1 }
FSRrmAPIfLoadParametersEntry ::=
SEQUENCE {
fsRrmAPIfLoadName DisplayString,
fsRrmAPIfLoadMacAddr MacAddress,
fsRrmAPIfLoadSlotId INTEGER,
fsRrmAPIfLoadRxUtilization INTEGER,
fsRrmAPIfLoadTxUtilization INTEGER,
fsRrmAPIfLoadChannelUtilization INTEGER,
fsRrmAPIfLoadNumOfClients Integer32,
fsRrmAPIfPoorSNRClients Integer32,
fsRrmAPIfThroughput INTEGER
}
fsRrmAPIfLoadRxUtilization OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the percentage of time the Airespace AP
receiver is busy operating on packets. It is a number
from 0-100 representing a load from 0 to 1."
::= { fsRrmAPIfLoadParametersEntry 1 }
fsRrmAPIfLoadTxUtilization OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the percentage of time the Airespace AP
transmitter is busy operating on packets. It is a
number from 0-100 representing a load from 0 to 1."
::= { fsRrmAPIfLoadParametersEntry 2 }
fsRrmAPIfLoadChannelUtilization OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel Utilization"
::= { fsRrmAPIfLoadParametersEntry 3 }
fsRrmAPIfLoadNumOfClients OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of clients attached to this Airespace
AP at the last measurement interval(This comes from
APF)"
::= { fsRrmAPIfLoadParametersEntry 4 }
fsRrmAPIfPoorSNRClients OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of clients with poor SNR attached to
this Airespace AP at the last measurement interval
( This comes from APF )."
::= { fsRrmAPIfLoadParametersEntry 5 }
fsRrmAPIfLoadName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfLoadParametersEntry 6 }
fsRrmAPIfLoadMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfLoadParametersEntry 7 }
fsRrmAPIfLoadSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfLoadParametersEntry 8 }
fsRrmAPIfThroughput OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Throughput in ap's radio, it represent the performance of
ap"
::= { fsRrmAPIfLoadParametersEntry 9 }
--********************************************************************
-- * Begin of fsRrmAPIfChannelInterferenceInfoTable
--********************************************************************
fsRrmAPIfChannelInterferenceInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfChannelInterferenceInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of channel information like interference
and noise from other 802.11 networks on each channel."
::= { fsRrmObjectsAP 5 }
fsRrmAPIfChannelInterferenceInfoEntry OBJECT-TYPE
SYNTAX FSRrmAPIfChannelInterferenceInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by
fsRrmAPDot3MacAddress, fsRrmAPIfSlotId"
INDEX { fsRrmAPIfInterferenceMacAddr, fsRrmAPIfInterferenceSlotId,
fsRrmAPIfInterferenceChannelNo}
::= { fsRrmAPIfChannelInterferenceInfoTable 1 }
FSRrmAPIfChannelInterferenceInfoEntry ::=
SEQUENCE {
fsRrmAPIfInterferenceName DisplayString,
fsRrmAPIfInterferenceMacAddr MacAddress,
fsRrmAPIfInterferenceSlotId INTEGER,
fsRrmAPIfInterferenceChannelNo Integer32,
fsRrmAPIfInterferencePower Integer32,
fsRrmAPIfInterferenceUtilization INTEGER
}
fsRrmAPIfInterferenceChannelNo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel Number on AP"
::= { fsRrmAPIfChannelInterferenceInfoEntry 1}
fsRrmAPIfInterferencePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power of Interference from other 802.11 networks on
this channel"
::= { fsRrmAPIfChannelInterferenceInfoEntry 2}
fsRrmAPIfInterferenceUtilization OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interference from other 802.11 networks on this
channel"
::= { fsRrmAPIfChannelInterferenceInfoEntry 3}
fsRrmAPIfInterferenceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfChannelInterferenceInfoEntry 4 }
fsRrmAPIfInterferenceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfChannelInterferenceInfoEntry 5 }
fsRrmAPIfInterferenceSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfChannelInterferenceInfoEntry 6 }
--********************************************************************
-- * Begin of fsRrmAPIfChannelNoiseInfoTable
--********************************************************************
fsRrmAPIfChannelNoiseInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfChannelNoiseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of channel information like
interference and noise from other 802.11 networks on
each channel."
::= { fsRrmObjectsAP 6 }
fsRrmAPIfChannelNoiseInfoEntry OBJECT-TYPE
SYNTAX FSRrmAPIfChannelNoiseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by fsRrmAPDot3MacAddress,
fsRrmAPIfSlotId"
INDEX { fsRrmAPIfNoiseMacAddr, fsRrmAPIfNoiseSlotId,
fsRrmAPIfNoiseChannelNo }
::= { fsRrmAPIfChannelNoiseInfoTable 1 }
FSRrmAPIfChannelNoiseInfoEntry ::=
SEQUENCE {
fsRrmAPIfNoiseName DisplayString,
fsRrmAPIfNoiseMacAddr MacAddress,
fsRrmAPIfNoiseSlotId INTEGER,
fsRrmAPIfNoiseChannelNo Integer32,
fsRrmAPIfDBNoisePower Integer32
}
fsRrmAPIfNoiseChannelNo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel Number on AP"
::= { fsRrmAPIfChannelNoiseInfoEntry 1 }
fsRrmAPIfDBNoisePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average noise power in dBm on
each channel that is available to Airespace AP"
::= { fsRrmAPIfChannelNoiseInfoEntry 2 }
fsRrmAPIfNoiseName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfChannelNoiseInfoEntry 3 }
fsRrmAPIfNoiseMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfChannelNoiseInfoEntry 4 }
fsRrmAPIfNoiseSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfChannelNoiseInfoEntry 5 }
--********************************************************************
-- * Begin of fsRrmAPIfProfileStateTable
--********************************************************************
fsRrmAPIfProfileStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfProfileStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of state of interference monitor
on each Airespace AP"
::= { fsRrmObjectsAP 7 }
fsRrmAPIfProfileStateEntry OBJECT-TYPE
SYNTAX FSRrmAPIfProfileStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by fsRrmAPDot3MacAddress,
fsRrmAPIfSlotId"
INDEX { fsRrmAPIfProfileMacAddr, fsRrmAPIfProfileSlotId }
::= { fsRrmAPIfProfileStateTable 1 }
FSRrmAPIfProfileStateEntry ::=
SEQUENCE {
fsRrmAPIfProfileName DisplayString,
fsRrmAPIfProfileMacAddr MacAddress,
fsRrmAPIfProfileSlotId INTEGER,
fsRrmAPIfLoadProfileState ProfileState,
fsRrmAPIfInterferenceProfileState ProfileState,
fsRrmAPIfNoiseProfileState ProfileState,
fsRrmAPIfCoverageProfileState ProfileState,
fsRrmAPIfPerformanceProfileState ProfileState
}
fsRrmAPIfLoadProfileState OBJECT-TYPE
SYNTAX ProfileState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field represents the current state of the LOAD
monitor. This is a total measurement of the business of
this Airespace AP. PASS indicates that this Airespace
AP is performing adequately compared to the Airespace
AP profile. FAIL indicates the Airespace AP is not
performing adequately against the LOAD profile."
::= { fsRrmAPIfProfileStateEntry 1 }
fsRrmAPIfInterferenceProfileState OBJECT-TYPE
SYNTAX ProfileState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field represents the current state of Interference
monitor. This is a total measurement of the interference
present at this Airespace AP. PASS indicates that this
Airespace AP is performing adequately compared to the
Interference profile. FAIL indicates the Airespace AP
is not performing adequately against the Interference
profile."
::= { fsRrmAPIfProfileStateEntry 2 }
fsRrmAPIfNoiseProfileState OBJECT-TYPE
SYNTAX ProfileState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field represents the current state of Noise
monitor. This is a total measurement of the noise
present at this Airespace AP. PASS indicates that this
Airespace AP is performing adequately compared to the
noise profile.
FAIL indicates the Airespace AP is not performing
adequately against the noise profile."
::= { fsRrmAPIfProfileStateEntry 3 }
fsRrmAPIfCoverageProfileState OBJECT-TYPE
SYNTAX ProfileState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field represents the current state of coverage
monitor. This is a total measurement of the client
coverage at this Airespace AP. PASS indicates that
this Airespace AP is performing adequately compared
to the coverage profile. FAIL indicates the Airespace
AP is not performing adequately against the coverage
profile."
::= { fsRrmAPIfProfileStateEntry 4}
fsRrmAPIfPerformanceProfileState OBJECT-TYPE
SYNTAX ProfileState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmAPIfProfileStateEntry 5}
fsRrmAPIfProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfProfileStateEntry 6 }
fsRrmAPIfProfileMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfProfileStateEntry 7 }
fsRrmAPIfProfileSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfProfileStateEntry 8 }
--********************************************************************
-- * Begin of fsRrmAPIfRxNeighborsTable
--********************************************************************
fsRrmAPIfRxNeighborsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfRxNeighborsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of Rx Neighbors for each Airespace AP
with their RSSI value."
::= { fsRrmObjectsAP 8 }
fsRrmAPIfRxNeighborsEntry OBJECT-TYPE
SYNTAX FSRrmAPIfRxNeighborsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by fsRrmAPDot3MacAddress
fsRrmAPIfSlotId, fsRrmAPIfRxNeighborMacAddress"
INDEX { fsRrmAPIfRxNeighborMacAddr, fsRrmAPIfRxNeighborSlotId,
fsRrmAPIfRxNeighborMacAddress, fsRrmAPIfRxNeighborSlot}
::= { fsRrmAPIfRxNeighborsTable 1 }
FSRrmAPIfRxNeighborsEntry ::=
SEQUENCE {
fsRrmAPIfRxNeighborName DisplayString,
fsRrmAPIfRxNeighborMacAddr MacAddress,
fsRrmAPIfRxNeighborSlotId INTEGER,
fsRrmAPIfRxNeighborMacAddress MacAddress,
fsRrmAPIfRxNeighborSlot Integer32,
fsRrmAPIfRxNeighborIpAddress IpAddress,
fsRrmAPIfRxNeighborRSSI Integer32,
fsRrmAPIfRxNeighborSNR Integer32,
fsRrmAPIfRxNeighborChannel Integer32,
fsRrmAPIfRxNeighborChannelWidth INTEGER
}
fsRrmAPIfRxNeighborMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address of Rx Neighbor of the Airespace AP"
::= { fsRrmAPIfRxNeighborsEntry 1 }
fsRrmAPIfRxNeighborSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot value of the Rx Neighbor"
::= { fsRrmAPIfRxNeighborsEntry 2 }
fsRrmAPIfRxNeighborIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of Rx Neighbor of the Airespace AP"
::= { fsRrmAPIfRxNeighborsEntry 3 }
fsRrmAPIfRxNeighborRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI value of the Rx Neighbor"
::= { fsRrmAPIfRxNeighborsEntry 4 }
fsRrmAPIfRxNeighborSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR value of the Rx Neighbor"
::= { fsRrmAPIfRxNeighborsEntry 5 }
fsRrmAPIfRxNeighborChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents Channel information which
neighboring Access point is using."
::= { fsRrmAPIfRxNeighborsEntry 6 }
fsRrmAPIfRxNeighborChannelWidth OBJECT-TYPE
SYNTAX INTEGER {
five(1),
ten(2),
twenty(3),
aboveforty(4),
belowforty(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents Channel bandwidth information
which neighboring Access point is using."
::= { fsRrmAPIfRxNeighborsEntry 7 }
fsRrmAPIfRxNeighborName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfRxNeighborsEntry 8 }
fsRrmAPIfRxNeighborMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfRxNeighborsEntry 9 }
fsRrmAPIfRxNeighborSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfRxNeighborsEntry 10 }
-- *****************************************************************
--********************************************************************
-- * Begin of fsRrmAPIfStationRSSICoverageInfoTable
--********************************************************************
fsRrmAPIfStationRSSICoverageInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfStationRSSICoverageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of channel information like interference
and noise from other 802.11 networks on each channel."
::= { fsRrmObjectsAP 9 }
fsRrmAPIfStationRSSICoverageInfoEntry OBJECT-TYPE
SYNTAX FSRrmAPIfStationRSSICoverageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by fsRrmAPDot3MacAddress,
fsRrmAPIfSlotId"
INDEX { fsRrmAPIfStationRSSIMacAddr, fsRrmAPIfStationRSSISlotId,
fsRrmAPIfStationRSSICoverageIndex}
::= { fsRrmAPIfStationRSSICoverageInfoTable 1 }
FSRrmAPIfStationRSSICoverageInfoEntry ::=
SEQUENCE {
fsRrmAPIfStationRSSIName DisplayString,
fsRrmAPIfStationRSSIMacAddr MacAddress,
fsRrmAPIfStationRSSISlotId INTEGER,
fsRrmAPIfStationRSSICoverageIndex Integer32,
fsRrmAPIfRSSILevel Integer32,
fsRrmAPIfStationCountOnRSSI Integer32
}
fsRrmAPIfStationRSSICoverageIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI Coverage Index on AP"
::= { fsRrmAPIfStationRSSICoverageInfoEntry 1 }
fsRrmAPIfRSSILevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI Level"
::= { fsRrmAPIfStationRSSICoverageInfoEntry 2 }
fsRrmAPIfStationCountOnRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations on this RSSI Level"
::= { fsRrmAPIfStationRSSICoverageInfoEntry 3 }
fsRrmAPIfStationRSSIName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfStationRSSICoverageInfoEntry 4 }
fsRrmAPIfStationRSSIMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfStationRSSICoverageInfoEntry 5 }
fsRrmAPIfStationRSSISlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfStationRSSICoverageInfoEntry 6 }
-- ********************************************************************
-- * Begin of fsRrmAPIfStationSNRCoverageInfoTable
-- ********************************************************************
fsRrmAPIfStationSNRCoverageInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfStationSNRCoverageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of Signal to Noise ratio Coverage
information on an AP Interface."
::= { fsRrmObjectsAP 10 }
fsRrmAPIfStationSNRCoverageInfoEntry OBJECT-TYPE
SYNTAX FSRrmAPIfStationSNRCoverageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by fsRrmAPDot3MacAddress,
fsRrmAPIfSlotId"
INDEX { fsRrmAPIfStationSNRMacAddr, fsRrmAPIfStationSNRSlotId,
fsRrmAPIfStationSNRCoverageIndex}
::= { fsRrmAPIfStationSNRCoverageInfoTable 1 }
FSRrmAPIfStationSNRCoverageInfoEntry ::=
SEQUENCE {
fsRrmAPIfStationSNRName DisplayString,
fsRrmAPIfStationSNRMacAddr MacAddress,
fsRrmAPIfStationSNRSlotId INTEGER,
fsRrmAPIfStationSNRCoverageIndex Integer32,
fsRrmAPIfSNRLevel Integer32,
fsRrmAPIfStationCountOnSNR Integer32
}
fsRrmAPIfStationSNRCoverageIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Coverage Index on AP"
::= { fsRrmAPIfStationSNRCoverageInfoEntry 1}
fsRrmAPIfSNRLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Level"
::= { fsRrmAPIfStationSNRCoverageInfoEntry 2}
fsRrmAPIfStationCountOnSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations on this SNR Level"
::= { fsRrmAPIfStationSNRCoverageInfoEntry 3}
fsRrmAPIfStationSNRName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfStationSNRCoverageInfoEntry 4 }
fsRrmAPIfStationSNRMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfStationSNRCoverageInfoEntry 5 }
fsRrmAPIfStationSNRSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfStationSNRCoverageInfoEntry 6 }
-- ********************************************************************
-- * Begin of fsRrmAPIfRecommendedRFParametersTable
-- ********************************************************************
fsRrmAPIfRecommendedRFParametersTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfRecommendedRFParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table list Best Channel,Best TxPowerLevel,
Best RTSThreshold,Best FragmentationThreshold etc
for this AP Interface as determined by RRM."
::= { fsRrmObjectsAP 11 }
fsRrmAPIfRecommendedRFParametersEntry OBJECT-TYPE
SYNTAX FSRrmAPIfRecommendedRFParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by fsRrmAPDot3MacAddress,
fsRrmAPIfSlotId"
INDEX { fsRrmAPIfRecommendedMacAddr, fsRrmAPIfRecommendedSlotId}
::= { fsRrmAPIfRecommendedRFParametersTable 1 }
FSRrmAPIfRecommendedRFParametersEntry ::=
SEQUENCE {
fsRrmAPIfRecommendedName DisplayString,
fsRrmAPIfRecommendedMacAddr MacAddress,
fsRrmAPIfRecommendedSlotId INTEGER,
fsRrmAPIfRecommendedChannelNumber Integer32,
fsRrmAPIfRecommendedTxPowerLevel Integer32,
fsRrmAPIfRecommendedRTSThreshold Integer32,
fsRrmAPIfRecommendedFragmentationThreshold Integer32
}
fsRrmAPIfRecommendedChannelNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Recommended ChannelNumber by RRM for this APIf"
::= { fsRrmAPIfRecommendedRFParametersEntry 1}
fsRrmAPIfRecommendedTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Recommended TxPowerLevel by RRM for this APIf"
::= { fsRrmAPIfRecommendedRFParametersEntry 2}
fsRrmAPIfRecommendedRTSThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Recommended RTSThreshold by RRM for this APIf"
::= { fsRrmAPIfRecommendedRFParametersEntry 3}
fsRrmAPIfRecommendedFragmentationThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Recommended Fragmentation Threshold by RRM for this
APIf"
::= { fsRrmAPIfRecommendedRFParametersEntry 4}
fsRrmAPIfRecommendedName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfRecommendedRFParametersEntry 5 }
fsRrmAPIfRecommendedMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfRecommendedRFParametersEntry 6 }
fsRrmAPIfRecommendedSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfRecommendedRFParametersEntry 7 }
--********************************************************************
-- * Begin of fsRrmAPRadioTable
--********************************************************************
fsRrmAPRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap radio table"
::= { fsRrmObjectsAP 12 }
fsRrmAPRadioEntry OBJECT-TYPE
SYNTAX FSRrmAPRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"all radio in aps"
INDEX { fsRrmAPMacAddr, fsRrmAPRadioID}
::= { fsRrmAPRadioTable 1 }
FSRrmAPRadioEntry ::=
SEQUENCE {
fsRrmAPRealName DisplayString,
fsRrmAPMacAddr MacAddress,
fsRrmAPRadioID INTEGER,
fsRrmAPRadioType INTEGER
}
fsRrmAPRadioID OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the FS AP.
Currently maximum 32 interfaces are supported."
::= { fsRrmAPRadioEntry 1 }
fsRrmAPRadioType OBJECT-TYPE
SYNTAX INTEGER {type80211a(0),type80211b(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio type, type 802.11b means 2.4GHz, type 802.11a means 5GHz,"
::= { fsRrmAPRadioEntry 2 }
fsRrmAPRealName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPRadioEntry 3 }
fsRrmAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPRadioEntry 4 }
--********************************************************************
-- * Begin of fsRrmAPIfThroughputParametersTable
--********************************************************************
fsRrmAPIfThroughputParametersTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPIfThroughputParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These are RRM performance related read only parameters
per Airespace AP"
::= { fsRrmObjectsAP 13 }
fsRrmAPIfThroughputParametersEntry OBJECT-TYPE
SYNTAX FSRrmAPIfThroughputParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by
fsRrmAPDot3MacAddress and fsRrmAPIfSlotId"
INDEX { fsRrmAPIfThroughputMacAddr, fsRrmAPIfThroughputSlotId }
::= { fsRrmAPIfThroughputParametersTable 1 }
FSRrmAPIfThroughputParametersEntry ::=
SEQUENCE {
fsRrmAPIfThroughputMacAddr MacAddress,
fsRrmAPIfThroughputSlotId INTEGER,
fsRrmAPIfThroughputAPName DisplayString,
fsRrmAPIfThroughputRx INTEGER,
fsRrmAPIfThroughputTx INTEGER,
fsRrmAPIfThroughputTotal INTEGER
}
fsRrmAPIfThroughputMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPIfThroughputParametersEntry 1 }
fsRrmAPIfThroughputSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPIfThroughputParametersEntry 2 }
fsRrmAPIfThroughputAPName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPIfThroughputParametersEntry 3 }
fsRrmAPIfThroughputRx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the RX throughput"
::= { fsRrmAPIfThroughputParametersEntry 4 }
fsRrmAPIfThroughputTx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the TX throughput"
::= { fsRrmAPIfThroughputParametersEntry 5 }
fsRrmAPIfThroughputTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total throughput"
::= { fsRrmAPIfThroughputParametersEntry 6 }
--********************************************************************
-- * Begin of fsRrmAPSnrBSSIDTable
--********************************************************************
fsRrmAPSnrBSSIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmAPSnrBSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These are stat on ap snr BSSID"
::= { fsRrmObjectsAP 14 }
fsRrmAPSnrBSSIDEntry OBJECT-TYPE
SYNTAX FSRrmAPSnrBSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the Table.
Entries in this MIB are indexed by
fsRrmAPDot3MacAddress and fsRrmAPIfSlotId"
INDEX { fsRrmAPSnrBSSIDMacAddr, fsRrmAPSnrBSSIDSlotId }
::= { fsRrmAPSnrBSSIDTable 1 }
FSRrmAPSnrBSSIDEntry ::=
SEQUENCE {
fsRrmAPSnrBSSIDMacAddr MacAddress,
fsRrmAPSnrBSSIDSlotId INTEGER,
fsRrmAPSnrBSSIDAPName DisplayString,
fsRrmAPSnrBSSIDAverageSignalStrength INTEGER,
fsRrmAPSnrBSSIDSignalPkts INTEGER,
fsRrmAPSnrBSSIDHighestRxSignalStrength INTEGER,
fsRrmAPSnrBSSIDLowestRxSignalStrength INTEGER,
fsRrmAPSnrBSSIDSampleTime INTEGER
}
fsRrmAPSnrBSSIDMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of radio on the AP"
::= { fsRrmAPSnrBSSIDEntry 1 }
fsRrmAPSnrBSSIDSlotId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g."
::= { fsRrmAPSnrBSSIDEntry 2 }
fsRrmAPSnrBSSIDAPName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the AP"
::= { fsRrmAPSnrBSSIDEntry 3 }
fsRrmAPSnrBSSIDAverageSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average signal strength during monitor"
::= { fsRrmAPSnrBSSIDEntry 4 }
fsRrmAPSnrBSSIDSignalPkts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of signal packets"
::= { fsRrmAPSnrBSSIDEntry 5 }
fsRrmAPSnrBSSIDHighestRxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest rx signal strength during monitor"
::= { fsRrmAPSnrBSSIDEntry 6 }
fsRrmAPSnrBSSIDLowestRxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest rx signal strength during monitor"
::= { fsRrmAPSnrBSSIDEntry 7 }
fsRrmAPSnrBSSIDSampleTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sample time"
::= { fsRrmAPSnrBSSIDEntry 8 }
--********************************************************************
-- **
-- DCA Algorithm **
-- **
--********************************************************************
fsRrmDot11bDynamicChannelAssignment OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
runOnce (2),
static (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic channel assignment(DCA) has three modes. When the
mode is auto, the channel assignment will be periodically
updated for all APs that permit this operation. When the
DCA is runOnce, channel assignments are updated based on
the UPDATE_CMD received from the management. When the DCA
is static, no dynamic channel assignments occurs and value
are set to their global default. Default is auto."
DEFVAL { automatic }
::= { fsRrmDCADot11b 1 }
fsRrmDot11bAnchorTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the time of DCA algorithm to start"
DEFVAL { 0 }
::= { fsRrmDCADot11b 2 }
fsRrmDot11bChannalWidth11n OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"channel width in DCA for 802.11n"
DEFVAL { 20 }
::= { fsRrmDCADot11b 3 }
fsRrmDot11bDynamicChannelUpdateInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When Channel dynamic alogirthm is running, this interval
(in secs) specifies how often Channel assignement updates
are attempted on an AP. NOTE: hysteresis is built into
the algorithms so we will not have uproductive changes
occuring. Default value is 600 secs"
DEFVAL { 600 }
::= { fsRrmDCADot11b 4 }
fsRrmDot11bDCASensitivity OBJECT-TYPE
SYNTAX INTEGER {
low (1),
medium (2),
high (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { medium }
::= { fsRrmDCADot11b 5 }
fsRrmDot11bForeignInterfereFactorEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { enable }
::= { fsRrmDCADot11b 6 }
fsRrmDot11bLoadFactorEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { disable }
::= { fsRrmDCADot11b 7 }
fsRrmDot11bNoiseFactorEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { disable }
::= { fsRrmDCADot11b 8 }
fsRrmDot11bChannelUpdateCmdInvoke OBJECT-TYPE
SYNTAX INTEGER { default (0), activate (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to activate this starts a DCA calculation regardless
of the dynamic update interval. This command should be invoke
on Group Leader FS Switch.Invoking on a FS
Switch which is not a Group leader has no effect."
::= { fsRrmDCADot11b 9 }
fsRrmDot11bDCAChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmDot11bDCAChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of FS Switch addresses that identifies
the members of the Dot11a RF group containing this FS
Switch. Max size is 20 entries."
::= { fsRrmDCADot11b 10 }
fsRrmDot11bDCAChannelEntry OBJECT-TYPE
SYNTAX FSRrmDot11bDCAChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ... "
INDEX { fsRrmDot11bDCAChannelIndex }
::= { fsRrmDot11bDCAChannelTable 1 }
FSRrmDot11bDCAChannelEntry ::=
SEQUENCE {
fsRrmDot11bDCAChannelIndex INTEGER,
fsRrmDot11bDCAChannelOperation INTEGER
}
fsRrmDot11bDCAChannelIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the index of dca channel."
::= { fsRrmDot11bDCAChannelEntry 1 }
fsRrmDot11bDCAChannelOperation OBJECT-TYPE
SYNTAX INTEGER {delete(0),add(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"add or delete the channel using in DCA algorithm."
::= { fsRrmDot11bDCAChannelEntry 2 }
fsRrmDot11aDynamicChannelAssignment OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
runOnce (2),
static (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic channel assignment(DCA) has three modes. When the
mode is auto, the channel assignment will be periodically
updated for all APs that permit this operation. When the
DCA is runOnce, channel assignments are updated based on
the UPDATE_CMD received from the management. When the DCA
is static, no dynamic channel assignments occurs and value
are set to their global default. Default is auto."
DEFVAL { automatic }
::= { fsRrmDCADot11a 1 }
fsRrmDot11aAnchorTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the time of DCA algorithm to start"
DEFVAL { 0 }
::= { fsRrmDCADot11a 2 }
fsRrmDot11aChannalWidth11n OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"channel width in DCA for 802.11n"
DEFVAL { 20 }
::= { fsRrmDCADot11a 3 }
fsRrmDot11aDynamicChannelUpdateInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When Channel dynamic alogirthm is running, this interval
(in secs) specifies how often Channel assignement updates
are attempted on an AP. NOTE: hysteresis is built into
the algorithms so we will not have uproductive changes
occuring. Default value is 600 secs"
DEFVAL { 600 }
::= { fsRrmDCADot11a 4 }
fsRrmDot11aDCASensitivity OBJECT-TYPE
SYNTAX INTEGER {
low (1),
medium (2),
high (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { medium }
::= { fsRrmDCADot11a 5 }
fsRrmDot11aForeignInterfereFactorEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { enable }
::= { fsRrmDCADot11a 6 }
fsRrmDot11aLoadFactorEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { disable }
::= { fsRrmDCADot11a 7 }
fsRrmDot11aNoiseFactorEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Consider foreign factor in DCA algorithm"
DEFVAL { disable }
::= { fsRrmDCADot11a 8 }
fsRrmDot11aChannelUpdateCmdInvoke OBJECT-TYPE
SYNTAX INTEGER { default (0), activate (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to activate this starts a DCA calculation regardless
of the dynamic update interval. This command should be invoke
on Group Leader FS Switch.Invoking on a FS
Switch which is not a Group leader has no effect."
::= { fsRrmDCADot11a 9 }
fsRrmDot11aDCAChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmDot11aDCAChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of FS Switch addresses that identifies
the members of the Dot11a RF group containing this FS
Switch. Max size is 20 entries."
::= { fsRrmDCADot11a 10 }
fsRrmDot11aDCAChannelEntry OBJECT-TYPE
SYNTAX FSRrmDot11aDCAChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ... "
INDEX { fsRrmDot11aDCAChannelIndex }
::= { fsRrmDot11aDCAChannelTable 1 }
FSRrmDot11aDCAChannelEntry ::=
SEQUENCE {
fsRrmDot11aDCAChannelIndex INTEGER,
fsRrmDot11aDCAChannelOperation INTEGER
}
fsRrmDot11aDCAChannelIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the index of dca channel."
::= { fsRrmDot11aDCAChannelEntry 1 }
fsRrmDot11aDCAChannelOperation OBJECT-TYPE
SYNTAX INTEGER {delete(0),add(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"add or delete the channel using in DCA algorithm."
::= { fsRrmDot11aDCAChannelEntry 2 }
--********************************************************************
-- **
-- TPC Algorithm **
-- **
--********************************************************************
fsRrmDot11bDTPCSupport OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute may be used to enable the DTPC support on all
802.11b/g radios. DTPC or Dynamic Transmit Power Control support
means that the radio's transmit power will be advertised in the
beacons and probe responses."
DEFVAL { enable }
::= { fsRrmTPCDot11b 1 }
fsRrmDot11bDynamicTransmitPowerControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
runOnce (2),
static (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic transmit power (DTP) has three modes. When the mode
is auto, the transmit power of each FS AP will be
periodically updated for all FS APs that permit this
operation. When the DTP is runOnce,transmit power update will
occur based on the UPDATE_CMD received from the management.
When the DTP is static, no dynamic transmit power updates
occur and their global defaults are used. Default is auto."
DEFVAL { automatic }
::= { fsRrmTPCDot11b 2 }
fsRrmDot11bDynamicTxPowerControlInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When Tx PowerControl dynamic alogirthm is running, this
interval(in secs) specifies how often TxPower control updates
are attempted on an FS AP. NOTE: hysteresis is
build into the algorithms so we will not have uproductive
changes occuring. Default value is 600 secs"
DEFVAL { 600 }
::= { fsRrmTPCDot11b 3 }
fsRrmDot11bCurrentTxPowerLevel OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TxPowerLevel N currently being used to transmit data.
Some PHYs also use this value to determine the receiver
sensitivity requirements for CCA."
::= { fsRrmTPCDot11b 4 }
fsRrmDot11bPowerUpdateCmdInvoke OBJECT-TYPE
SYNTAX INTEGER { default (0), activate (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to activate this starts a DTP calculation regardless
of the dynamic update interval. This command should be
invoke on Group Leader FS Switch.Invoking on a
FS Switch which is not a Group leader has no effect."
::= { fsRrmTPCDot11b 5 }
fsRrmDot11bTXPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (-90..-60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"threshold value in TPC algorithm"
DEFVAL { -70 }
::= { fsRrmTPCDot11b 6 }
fsRrmDot11bTPCNeighborNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"threshold value in TPC algorithm"
DEFVAL { 3 }
::= { fsRrmTPCDot11b 7 }
fsRrmDot11aDTPCSupport OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute may be used to enable the DTPC support on all
802.11b/g radios. DTPC or Dynamic Transmit Power Control support
means that the radio's transmit power will be advertised in the
beacons and probe responses."
DEFVAL { enable }
::= { fsRrmTPCDot11a 1 }
fsRrmDot11aDynamicTransmitPowerControl OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
runOnce (2),
static (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic transmit power (DTP) has three modes. When the mode
is auto, the transmit power of each FS AP will be
periodically updated for all FS APs that permit this
operation. When the DTP is runOnce,transmit power update will
occur based on the UPDATE_CMD received from the management.
When the DTP is static, no dynamic transmit power updates
occur and their global defaults are used. Default is auto."
DEFVAL { automatic }
::= { fsRrmTPCDot11a 2 }
fsRrmDot11aDynamicTxPowerControlInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When Tx PowerControl dynamic alogirthm is running, this
interval(in secs) specifies how often TxPower control updates
are attempted on an FS AP. NOTE: hysteresis is
build into the algorithms so we will not have uproductive
changes occuring. Default value is 600 secs"
DEFVAL { 600 }
::= { fsRrmTPCDot11a 3 }
fsRrmDot11aCurrentTxPowerLevel OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TxPowerLevel N currently being used to transmit data.
Some PHYs also use this value to determine the receiver
sensitivity requirements for CCA."
::= { fsRrmTPCDot11a 4 }
fsRrmDot11aPowerUpdateCmdInvoke OBJECT-TYPE
SYNTAX INTEGER { default (0), activate (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to activate this starts a DTP calculation regardless
of the dynamic update interval. This command should be
invoke on Group Leader FS Switch.Invoking on a
FS Switch which is not a Group leader has no effect."
::= { fsRrmTPCDot11a 5 }
fsRrmDot11aTXPowerThreshold OBJECT-TYPE
SYNTAX INTEGER (-90..-60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"threshold value in TPC algorithm"
DEFVAL { -70 }
::= { fsRrmTPCDot11a 6 }
fsRrmDot11aTPCNeighborNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"threshold value in TPC algorithm"
DEFVAL { 3 }
::= { fsRrmTPCDot11a 7 }
--********************************************************************
-- **
-- CHD Algorithm **
-- **
--********************************************************************
fsRrmDot11bCoverageEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm. Default is enable."
DEFVAL { enable }
::= { fsRrmCHDDot11b 1 }
fsRrmDot11bCoverageExceptionGlobal OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 25 }
::= { fsRrmCHDDot11b 2 }
fsRrmDot11bCoverageLevelGlobal OBJECT-TYPE
SYNTAX INTEGER (1..75)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 3 }
::= { fsRrmCHDDot11b 3 }
fsRrmDot11bCoverageDataRSSIThreshold OBJECT-TYPE
SYNTAX INTEGER (-90..-60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { -80 }
::= { fsRrmCHDDot11b 4 }
fsRrmDot11bCoverageVoiceRSSIThreshold OBJECT-TYPE
SYNTAX INTEGER (-90..-60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { -75 }
::= { fsRrmCHDDot11b 5 }
fsRrmDot11bCoverageDataPacketCount OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 10 }
::= { fsRrmCHDDot11b 6 }
fsRrmDot11bCoverageVoicePacketCount OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 10 }
::= { fsRrmCHDDot11b 7 }
fsRrmDot11bCoverageDataFailRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 20 }
::= { fsRrmCHDDot11b 8 }
fsRrmDot11bCoverageVoiceFailRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 20 }
::= { fsRrmCHDDot11b 9 }
fsRrmDot11aCoverageEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm. Default is enable."
DEFVAL { enable }
::= { fsRrmCHDDot11a 1 }
fsRrmDot11aCoverageExceptionGlobal OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 25 }
::= { fsRrmCHDDot11a 2 }
fsRrmDot11aCoverageLevelGlobal OBJECT-TYPE
SYNTAX INTEGER (1..75)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 3 }
::= { fsRrmCHDDot11a 3 }
fsRrmDot11aCoverageDataRSSIThreshold OBJECT-TYPE
SYNTAX INTEGER (-90..-60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { -80 }
::= { fsRrmCHDDot11a 4 }
fsRrmDot11aCoverageVoiceRSSIThreshold OBJECT-TYPE
SYNTAX INTEGER (-90..-60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { -75 }
::= { fsRrmCHDDot11a 5 }
fsRrmDot11aCoverageDataPacketCount OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 10 }
::= { fsRrmCHDDot11a 6 }
fsRrmDot11aCoverageVoicePacketCount OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 10 }
::= { fsRrmCHDDot11a 7 }
fsRrmDot11aCoverageDataFailRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 20 }
::= { fsRrmCHDDot11a 8 }
fsRrmDot11aCoverageVoiceFailRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CHD algorighm."
DEFVAL { 20 }
::= { fsRrmCHDDot11a 9 }
--********************************************************************
-- **
-- RRM Group Infomation **
-- **
--********************************************************************
fsRrmDot11bGlobalAutomaticGrouping OBJECT-TYPE
SYNTAX INTEGER { automatic (1), off (0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic grouping has two modes: on and off. When the grouping
is off, no dynamic grouping occurs. Each FS Switch
optimizes only its own FS APs' parameters. When
grouping is on, the FS Switches form groups and
elect leaders to perform better dynamic parameter
optimization."
DEFVAL { automatic }
::= { fsRrmGroupDot11b 1 }
fsRrmDot11bGroupLeaderMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC address of the group leader for the Dot11b
group containing this FS Switch."
::= { fsRrmGroupDot11b 2 }
fsRrmDot11bGroupLeader OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this FS Switch is a Dot11b Group Leader then this
attribute will be true else it will be false."
::= { fsRrmGroupDot11b 3 }
fsRrmDot11bGroupLastUpdateTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time the Dot11b grouping was updated on this FS
Switch. This is valid only if the FS Switch is a
group leader."
::= { fsRrmGroupDot11b 4 }
fsRrmDot11bGroupInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When grouping is on, this interval(in secs) represents the
period with which the grouping algorithm is run. Grouping
algorithm will also run when the group contents changes and
the automatic grouping is enabled. A dynamic grouping can be
started upon request from the system administrator. Default
value is 3600 secs."
DEFVAL { 3600 }
::= {fsRrmGroupDot11b 5}
fsRrmDot11bGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmDot11bGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of FS Switch addresses that identifies
the members of the Dot11b RF group containing this FS
Switch. Max size is 20 entries."
::= { fsRrmGroupDot11b 6 }
fsRrmDot11bGroupEntry OBJECT-TYPE
SYNTAX FSRrmDot11bGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ... "
INDEX { fsRrmDot11bPeerMacAddress }
::= { fsRrmDot11bGroupTable 1 }
FSRrmDot11bGroupEntry ::=
SEQUENCE {
fsRrmDot11bPeerMacAddress MacAddress,
fsRrmDot11bPeerIpAddress IpAddress
}
fsRrmDot11bPeerMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the member Switch."
::= { fsRrmDot11bGroupEntry 1 }
fsRrmDot11bPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the FS Switch."
::= { fsRrmDot11bGroupEntry 2 }
fsRrmDot11bSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmDot11bSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { fsRrmGroupDot11b 7 }
fsRrmDot11bSummaryEntry OBJECT-TYPE
SYNTAX FSRrmDot11bSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ... "
INDEX { fsRrmDot11bSummaryMacAddress, fsRrmDot11bAPRadioID}
::= { fsRrmDot11bSummaryTable 1 }
FSRrmDot11bSummaryEntry ::=
SEQUENCE {
fsRrmDot11bSummaryMacAddress MacAddress,
fsRrmDot11bAPname DisplayString,
fsRrmDot11bAPRadioID Unsigned32,
fsRrmDot11bAPChannel Unsigned32,
fsRrmDot11bAPTxPower Unsigned32,
fsRrmDot11bAPChannelRrmChangeFlag INTEGER,
fsRrmDot11bAPTxPowerRrmChangeFlag INTEGER
}
fsRrmDot11bAPname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11bSummaryEntry 1 }
fsRrmDot11bAPRadioID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11bSummaryEntry 2 }
fsRrmDot11bAPChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11bSummaryEntry 3 }
fsRrmDot11bAPTxPower OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11bSummaryEntry 4 }
fsRrmDot11bAPChannelRrmChangeFlag OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11bSummaryEntry 5 }
fsRrmDot11bAPTxPowerRrmChangeFlag OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11bSummaryEntry 6 }
fsRrmDot11bSummaryMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the member Switch."
::= { fsRrmDot11bSummaryEntry 7 }
fsRrmDot11aGlobalAutomaticGrouping OBJECT-TYPE
SYNTAX INTEGER { automatic (1), off (0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic grouping has two modes: on and off. When the grouping
is off, no dynamic grouping occurs. Each FS Switch
optimizes only its own FS APs' parameters. When
grouping is on, the FS Switches form groups and
elect leaders to perform better dynamic parameter
optimization."
DEFVAL { automatic }
::= { fsRrmGroupDot11a 1 }
fsRrmDot11aGroupLeaderMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC address of the group leader for the dot11a
group containing this FS Switch."
::= { fsRrmGroupDot11a 2 }
fsRrmDot11aGroupLeader OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this FS Switch is a Dot11a Group Leader then this
attribute will be true else it will be false."
::= { fsRrmGroupDot11a 3 }
fsRrmDot11aGroupLastUpdateTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time the dot11a grouping was updated on this FS
Switch. This is valid only if the FS Switch is a
group leader."
::= { fsRrmGroupDot11a 4 }
fsRrmDot11aGroupInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When grouping is on, this interval(in secs) represents the
period with which the grouping algorithm is run. Grouping
algorithm will also run when the group contents changes and
the automatic grouping is enabled. A dynamic grouping can be
started upon request from the system administrator. Default
value is 3600 secs."
DEFVAL { 3600 }
::= {fsRrmGroupDot11a 5}
fsRrmDot11aGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmDot11aGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of FS Switch addresses that identifies
the members of the Dot11a RF group containing this FS
Switch. Max size is 20 entries."
::= { fsRrmGroupDot11a 6 }
fsRrmDot11aGroupEntry OBJECT-TYPE
SYNTAX FSRrmDot11aGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ... "
INDEX { fsRrmDot11aPeerMacAddress }
::= { fsRrmDot11aGroupTable 1 }
FSRrmDot11aGroupEntry ::=
SEQUENCE {
fsRrmDot11aPeerMacAddress MacAddress,
fsRrmDot11aPeerIpAddress IpAddress
}
fsRrmDot11aPeerMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the member Switch."
::= { fsRrmDot11aGroupEntry 1 }
fsRrmDot11aPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the FS Switch."
::= { fsRrmDot11aGroupEntry 2 }
fsRrmDot11aSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSRrmDot11aSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { fsRrmGroupDot11a 7 }
fsRrmDot11aSummaryEntry OBJECT-TYPE
SYNTAX FSRrmDot11aSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ... "
INDEX { fsRrmDot11aSummaryMacAddress, fsRrmDot11aAPRadioID}
::= { fsRrmDot11aSummaryTable 1 }
FSRrmDot11aSummaryEntry ::=
SEQUENCE {
fsRrmDot11aSummaryMacAddress MacAddress,
fsRrmDot11aAPname DisplayString,
fsRrmDot11aAPRadioID Unsigned32,
fsRrmDot11aAPChannel Unsigned32,
fsRrmDot11aAPTxPower Unsigned32,
fsRrmDot11aAPChannelRrmChangeFlag INTEGER,
fsRrmDot11aAPTxPowerRrmChangeFlag INTEGER
}
fsRrmDot11aAPname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11aSummaryEntry 1 }
fsRrmDot11aAPRadioID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11aSummaryEntry 2 }
fsRrmDot11aAPChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11aSummaryEntry 3 }
fsRrmDot11aAPTxPower OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11aSummaryEntry 4 }
fsRrmDot11aAPChannelRrmChangeFlag OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11aSummaryEntry 5 }
fsRrmDot11aAPTxPowerRrmChangeFlag OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { fsRrmDot11aSummaryEntry 6 }
fsRrmDot11aSummaryMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the member Switch."
::= { fsRrmDot11aSummaryEntry 7 }
--********************************************************************
-- **
-- RRM Profile Value **
-- **
--********************************************************************
fsRrmDot11bForeignInterferenceThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"foreign 802.11B interference threshold between 0 and 100
percent."
DEFVAL { 10 }
::= {fsRrmProfileDot11b 1 }
fsRrmDot11bForeignNoiseThreshold OBJECT-TYPE
SYNTAX INTEGER(-127..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 802.11B foreign noise threshold between -127 and 0 dBm."
DEFVAL { -70 }
::= {fsRrmProfileDot11b 2 }
fsRrmDot11bRFUtilizationThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11B RF utlization threshold between 0 and 100
percent."
DEFVAL { 80 }
::= {fsRrmProfileDot11b 3 }
fsRrmDot11bThroughputThreshold OBJECT-TYPE
SYNTAX Unsigned32(1000..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 802.11B throughput threshold between 1000 and 10000000"
DEFVAL { 1000000 }
::= {fsRrmProfileDot11b 4 }
fsRrmDot11bMobilesThreshold OBJECT-TYPE
SYNTAX INTEGER(1..75)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11B mobiles threshold between 1 and 75"
DEFVAL { 12 }
::= {fsRrmProfileDot11b 5 }
fsRrmDot11aForeignInterferenceThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"foreign 802.11A interference threshold between 0 and 100
percent."
DEFVAL { 10 }
::= {fsRrmProfileDot11a 1 }
fsRrmDot11aForeignNoiseThreshold OBJECT-TYPE
SYNTAX INTEGER(-127..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 802.11A foreign noise threshold between -127 and 0 dBm."
DEFVAL { -70 }
::= {fsRrmProfileDot11a 2 }
fsRrmDot11aRFUtilizationThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11A RF utlization threshold between 0 and 100
percent."
DEFVAL { 80 }
::= {fsRrmProfileDot11a 3 }
fsRrmDot11aThroughputThreshold OBJECT-TYPE
SYNTAX Unsigned32(1000..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 802.11A throughput threshold between 1000 and 10000000"
DEFVAL { 1000000 }
::= {fsRrmProfileDot11a 4 }
fsRrmDot11aMobilesThreshold OBJECT-TYPE
SYNTAX INTEGER(1..75)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11A mobiles threshold between 1 and 75"
DEFVAL { 12 }
::= {fsRrmProfileDot11a 5 }
--********************************************************************
-- **
-- RRM Monitor **
-- **
--********************************************************************
fsRrmDot11bMonitorEnable OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable monitor function."
DEFVAL { enable }
::= { fsRrmMonitorDot11b 1 }
fsRrmDot11bChannelMonitorList OBJECT-TYPE
SYNTAX INTEGER {
all(1),
country(2),
dca(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the channels on which the switch monitors
noise, interference and rogues. The first option allows
monitoring on all channels while the second one on only those
that are supported by the country of operation. the option dca
implies that the monitor channel list will include those channels
that are used by automatic channel assignment."
DEFVAL { country }
::= { fsRrmMonitorDot11b 2 }
fsRrmDot11bMonitorInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often the AP goto off
channel state to monitor. Default is 300 secs"
DEFVAL { 180 }
::= {fsRrmMonitorDot11b 3}
fsRrmDot11bCoverageMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often do we get new
coverage measurements at each FS AP. Default is 300 secs"
DEFVAL { 180 }
::= {fsRrmMonitorDot11b 4}
fsRrmDot11bLoadMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often do we get new
load measurements at each FS AP. Default is 300 secs"
DEFVAL { 60 }
::= {fsRrmMonitorDot11b 5}
fsRrmDot11bNoiseMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often do we get new
noise and interference measurements at each FS AP.
Default is 300 secs"
DEFVAL { 180 }
::= { fsRrmMonitorDot11b 6 }
fsRrmDot11bSignalMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval (in secs) specifies how often do we get new
signal strength measurements at each FS AP. Default is
300 secs"
DEFVAL { 60 }
::= { fsRrmMonitorDot11b 7 }
fsRrmDot11bNeighborMessageInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval (in secs) specifies how often the AP send
neighbor message"
DEFVAL { 60 }
::= { fsRrmMonitorDot11b 8 }
fsRrmDot11aMonitorEnable OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable monitor function."
DEFVAL { enable }
::= { fsRrmMonitorDot11a 1 }
fsRrmDot11aChannelMonitorList OBJECT-TYPE
SYNTAX INTEGER {
all(1),
country(2),
dca(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the channels on which the switch monitors
noise, interference and rogues. The first option allows
monitoring on all channels while the second one on only those
that are supported by the country of operation. the option dca
implies that the monitor channel list will include those channels
that are used by automatic channel assignment."
DEFVAL { country }
::= { fsRrmMonitorDot11a 2 }
fsRrmDot11aMonitorInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often the AP goto off
channel state to monitor. Default is 300 secs"
DEFVAL { 180 }
::= {fsRrmMonitorDot11a 3}
fsRrmDot11aCoverageMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often do we get new
coverage measurements at each FS AP. Default is 300 secs"
DEFVAL { 180 }
::= {fsRrmMonitorDot11a 4}
fsRrmDot11aLoadMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often do we get new
load measurements at each FS AP. Default is 300 secs"
DEFVAL { 60 }
::= {fsRrmMonitorDot11a 5}
fsRrmDot11aNoiseMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval( in secs) specifies how often do we get new
noise and interference measurements at each FS AP.
Default is 300 secs"
DEFVAL { 180 }
::= { fsRrmMonitorDot11a 6 }
fsRrmDot11aSignalMeasurementInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval (in secs) specifies how often do we get new
signal strength measurements at each FS AP. Default is
300 secs"
DEFVAL { 60 }
::= { fsRrmMonitorDot11a 7 }
fsRrmDot11aNeighborMessageInterval OBJECT-TYPE
SYNTAX Unsigned32(60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval (in secs) specifies how often the AP send
neighbor message"
DEFVAL { 60 }
::= { fsRrmMonitorDot11a 8 }
--********************************************************************
-- **
-- Set Factory Defaults **
-- **
--********************************************************************
fsRrmDot11bSetFactoryDefault OBJECT-TYPE
SYNTAX INTEGER {default(0),activate (1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to activate all Rrm parameters are reset to
factory defaults"
::= { fsRrmFactoryDot11b 1 }
fsRrmDot11aSetFactoryDefault OBJECT-TYPE
SYNTAX INTEGER {default(0),activate (1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to activate all Rrm parameters are reset to
factory defaults"
::= { fsRrmFactoryDot11a 1 }
-- *************************************************************
-- fsRrmTrapControl would specify all the objects that enable/disable the
-- the generation of traps by FS Switch
-- fsRrmTraps would specify all the possible traps that FS Switch
-- would need to generate
-- *************************************************************
--***************** define the fsRrmMIBObjects nodes *****************
fsRrmTrapControl OBJECT IDENTIFIER ::= { fsRrmMIBTraps 1 }
fsRrmTrapVariable OBJECT IDENTIFIER ::= { fsRrmMIBTraps 2 }
fsRrmTraps OBJECT IDENTIFIER ::= { fsRrmMIBTraps 3 }
-- *************************************************************
-- extra trap variables definining here
-- *************************************************************
-- for AP infomation
fsRrmAPMacAddrTrapVariable OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of ap radio MAC address in trap"
::= { fsRrmTrapVariable 1 }
fsRrmAPRadioIDTrapVariable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of radio id in trap"
::= { fsRrmTrapVariable 2 }
fsRrmAPRadioTypeTrapVariable OBJECT-TYPE
SYNTAX INTEGER {type80211a(0), type80211b(1)}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of radio type in trap"
::= { fsRrmTrapVariable 3 }
-- Get Trap Value
fsRrmClientNumberTrapVariable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of client number in trap"
::= { fsRrmTrapVariable 4 }
fsRrmForeignInterfereTrapVariable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of interference in trap"
::= { fsRrmTrapVariable 5 }
fsRrmNoiseTrapVariable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of noise in trap"
::= { fsRrmTrapVariable 6 }
fsRrmThroughputTrapVariable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of throughput in trap"
::= { fsRrmTrapVariable 7 }
fsRrmUtilizationTrapVariable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the variable of utilization in trap"
::= { fsRrmTrapVariable 8 }
-- for TPC
fsRrmAPTxPowerBeforeChange OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The txpower level before change"
::= { fsRrmTrapVariable 9 }
fsRrmAPTxPowerAfterChange OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The txpower level after change"
::= { fsRrmTrapVariable 10 }
-- for DCA
fsRrmAPChannelNumberBeforeChannge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The channel before change"
::= { fsRrmTrapVariable 11 }
fsRrmAPChannelNumberAfterChannge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The channel after channge"
::= { fsRrmTrapVariable 12 }
fsRrmDot11bGroupLeaderMacAddrTrapVariable OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address of the group leader."
::= { fsRrmTrapVariable 13 }
fsRrmDot11aGroupLeaderMacAddrTrapVariable OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address of the group leader."
::= { fsRrmTrapVariable 14 }
fsRrmAPChannelChangeReason OBJECT-TYPE
SYNTAX INTEGER {
signal(1),
interference(2),
noise(3),
load(4),
radar(5),
other(6)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason cause the channel changed"
::= { fsRrmTrapVariable 15 }
fsRrmAPChannelChangeReasonValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The special value along with the reason of channel change"
::= { fsRrmTrapVariable 16 }
fsRrmAPTxPowerChangeCoverageFlag OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indication the power change cause by which algorithm, TPC
Algorithm or CHD Algorithm"
::= { fsRrmTrapVariable 17 }
fsRrmDFSFreeCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indication the number of channel usable"
::= { fsRrmTrapVariable 18 }
fsRrmAPChannelChangeCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the number of channel change"
::= { fsRrmTrapVariable 19 }
-- *************************************************************
-- Whenever LOAD, NOISE, INTERFERENCE, COVERAGE Profile state changes
-- from PASS to FAIL for FS AP IF, notification will be sent, if
-- configured to do so.
-- *************************************************************
fsRrmAPDot11bProfileTrapControlMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mask describes what events merit traps to network
management. If the bit for a particular event is turned
on then notification will be generated on event occurance.
Event corresponding bit
----- -----------------
ClientNumProfileFail 1
LoadProfileFail 2
NoiseProfileFail 4
InterferenceProfileFail 8
PerformanceProfileFailed 16
"
DEFVAL { 0 }
::= { fsRrmTrapControl 1 }
fsRrmAPDot11aProfileTrapControlMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mask describes what events merit traps to network
management. If the bit for a particular event is turned
on then notification will be generated on event occurance.
Event corresponding bit
----- -----------------
ClientNumProfileFail 1
LoadProfileFail 2
NoiseProfileFail 4
InterferenceProfileFail 8
PerformanceProfileFailed 16
"
DEFVAL { 0 }
::= { fsRrmTrapControl 2 }
fsRrmAPClientNumProfileFailed NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmClientNumberTrapVariable
}
STATUS current
DESCRIPTION
"too many clients "
::= { fsRrmTraps 1 }
fsRrmAPLoadProfileFailed NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmUtilizationTrapVariable
}
STATUS current
DESCRIPTION
"When LOAD Profile state changes from PASS to FAIL,
notification will be sent with Dot3 MAC address of FS
AP and slot ID of FS AP IF. This trap sending can be
enable/disable using fsRrmRrmProfileTrapControlFlag "
::= { fsRrmTraps 2 }
fsRrmAPNoiseProfileFailed NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmNoiseTrapVariable
}
STATUS current
DESCRIPTION
"When Noise Profile state changes from PASS to FAIL,
notification will be sent with Dot3 MAC address of FS
AP and slot ID of FS AP IF. This trap sending can be
enable/disable using fsRrmRrmProfileTrapControlFlag "
::= { fsRrmTraps 3 }
fsRrmAPInterferenceProfileFailed NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmForeignInterfereTrapVariable
}
STATUS current
DESCRIPTION
"When Interference Profile state changes from PASS to FAIL,
notification will be sent with Dot3 MAC address of FS
AP and slot ID of FS AP IF. This trap sending can be
enable/disable using fsRrmRrmProfileTrapControlFlag "
::= { fsRrmTraps 4 }
fsRrmAPPerformanceProfileFailed NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmThroughputTrapVariable
}
STATUS current
DESCRIPTION
" "
::= { fsRrmTraps 5 }
fsRrmAPClientNumProfileUpdatedToPass NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmClientNumberTrapVariable
}
STATUS current
DESCRIPTION
""
::= { fsRrmTraps 6 }
fsRrmAPLoadProfileUpdatedToPass NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmUtilizationTrapVariable
}
STATUS current
DESCRIPTION
"When LOAD Profile state changes from FAIL to PASSt this
notification will be sent with Dot3 MAC address of FS
AP and slot ID of FS AP IF. This trap sending can be
enable/disable using fsRrmRrmProfileTrapControlFlag "
::= { fsRrmTraps 7 }
fsRrmAPNoiseProfileUpdatedToPass NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmNoiseTrapVariable
}
STATUS current
DESCRIPTION
"When Noise Profile state changes from FAIL tp PASS,
notification will be sent with Dot3 MAC address of FS
AP and slot ID of FS AP IF. This trap sending can be
enable/disable using fsRrmRrmProfileTrapControlFlag "
::= { fsRrmTraps 8 }
fsRrmAPInterferenceProfileUpdatedToPass NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmForeignInterfereTrapVariable
}
STATUS current
DESCRIPTION
"When Interference Profile state changes from FAIL tp PASS,
notification will be sent with Dot3 MAC address of FS
AP and slot ID of FS AP IF. This trap sending can be
enable /disable using fsRrmRrmProfileTrapControlFlag "
::= { fsRrmTraps 9 }
fsRrmAPPerformanceProfileUpdatedToPass NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmThroughputTrapVariable
}
STATUS current
DESCRIPTION
" "
::= { fsRrmTraps 10 }
fsRrmAPDot11bParamUpdateTrapControlMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mac Parameters are updated for a FS AP interface
whenever Dynamic Algorithm are run. This mask describes
what update events merit traps to network management. If
the bit for a particular event is turned on then
notification will be generated on event occurance.
Event corresponding bit
----- -----------------
TxPowerChange 1
ChannelChange 2
"
DEFVAL { 0 }
::= { fsRrmTrapControl 3 }
fsRrmAPDot11aParamUpdateTrapControlMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mac Parameters are updated for a FS AP interface
whenever Dynamic Algorithm are run. This mask describes
what update events merit traps to network management. If
the bit for a particular event is turned on then
notification will be generated on event occurance.
Event corresponding bit
----- -----------------
TxPowerChange 1
ChannelChange 2
"
DEFVAL { 0 }
::= { fsRrmTrapControl 4 }
fsRrmAPCurrentTxPowerChanged NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmAPTxPowerBeforeChange,
fsRrmAPTxPowerAfterChange,
fsRrmAPTxPowerChangeCoverageFlag
}
STATUS current
DESCRIPTION
"Whenever dynamic algorithms are running and
fsRrmAPIfPhyPowerAutomaticOn is true, FS AP Interface's
CurrentTxPower might get updated by algorithm. When
this occurs notification will be sent with Dot3 MAC address of
FS AP and slot ID of FS AP IF along with the
currentTxPower for this FS AP IF"
::= { fsRrmTraps 11 }
fsRrmAPCurrentChannelChanged NOTIFICATION-TYPE
OBJECTS {
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
fsRrmAPChannelNumberBeforeChannge,
fsRrmAPChannelNumberAfterChannge,
fsRrmAPChannelChangeReason,
fsRrmAPChannelChangeReasonValue,
fsRrmAPChannelChangeCount
}
STATUS current
DESCRIPTION
"Whenever dynamic algorithms are running and
fsRrmAPIfPhyChannelAutomaticOn is true, FS AP
Interface's CurrentChannel might get updated by algorithm.
When this occurs notification will be sent with Dot3 MAC
address of FS AP and slot ID of FS AP IF along
with the currentChannel for this FS AP IF"
::= { fsRrmTraps 12 }
-- *************************************************************
-- Also, when dynamic grouping is done and new Group leader is choosen
-- NMS needs to be informed so that necessary updates can be done in
-- NMS.
-- *************************************************************
fsRrmDot11bGroupingDone NOTIFICATION-TYPE
OBJECTS { fsRrmDot11bGroupLeaderMacAddrTrapVariable }
STATUS current
DESCRIPTION
"When Grouping is done, this notification will be sent from the
previous Group Leader where grouping algorithm was run. It has
MAC address of the new Group Leader."
::= { fsRrmTraps 13 }
fsRrmDot11aGroupingDone NOTIFICATION-TYPE
OBJECTS { fsRrmDot11aGroupLeaderMacAddrTrapVariable }
STATUS current
DESCRIPTION
"When Grouping is done, this notification will be sent from the
previous Group Leader where grouping algorithm was run. It has
MAC address of the new Group Leader."
::= { fsRrmTraps 14 }
fsRrmDot11bDFSFreeCountBelowThreshold NOTIFICATION-TYPE
OBJECTS { fsRrmDFSFreeCount }
STATUS current
DESCRIPTION
"When the free channel in 802.11b DCA too few, this notification
will be sent"
::= { fsRrmTraps 15 }
fsRrmDot11aDFSFreeCountBelowThreshold NOTIFICATION-TYPE
OBJECTS { fsRrmDFSFreeCount }
STATUS current
DESCRIPTION
"When the free channel in 802.11b DCA too few, this notification
will be sent"
::= { fsRrmTraps 16 }
fsRrmNeighborAPInterference NOTIFICATION-TYPE
OBJECTS { fsRrmAPMacAddrTrapVariable }
STATUS current
DESCRIPTION
"notice when find interference form neighbor AP"
::= { fsRrmTraps 17 }
fsRrmStationInterference NOTIFICATION-TYPE
OBJECTS { fsRrmAPMacAddrTrapVariable }
STATUS current
DESCRIPTION
"notice when find interference form station"
::= { fsRrmTraps 18 }
fsRrmOtherDiveceInterference NOTIFICATION-TYPE
OBJECTS { fsRrmAPMacAddrTrapVariable }
STATUS current
DESCRIPTION
"notice when find interference form other divece"
::= { fsRrmTraps 19 }
--***************** define the fsRrmMIBConformance nodes ************
fsRrmMIBCompliances OBJECT IDENTIFIER ::= { fsRrmMIBConformance 1 }
fsRrmMIBGroups OBJECT IDENTIFIER ::= { fsRrmMIBConformance 2 }
--********************************************************************
-- **
-- compliance statements **
-- **
--********************************************************************
fsRrmMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the FS RRM module"
MODULE -- this module
MANDATORY-GROUPS {
fsRrmMIBGroup,
fsRrmTrapsGroup
}
::= { fsRrmMIBCompliances 1 }
--********************************************************************
-- **
-- units of conformance **
-- **
--********************************************************************
fsRrmMIBGroup OBJECT-GROUP
OBJECTS {
--Begin rf group
fsRrmRFNetworkName,
--Begin AP auto-rf
fsRrmAPName,
fsRrmAPIfThresholdRadioType,
fsRrmAPIfForeignInterferenceThreshold,
fsRrmAPIfForeignNoiseThreshold,
fsRrmAPIfRFUtilizationThreshold,
fsRrmAPIfThroughputThreshold,
fsRrmAPIfMobilesThreshold,
fsRrmAPIfThresholdMacAddr,
fsRrmAPIfThresholdRadioType,
fsRrmAPIfThresholdName,
fsRrmAPIfLoadRxUtilization,
fsRrmAPIfLoadTxUtilization,
fsRrmAPIfLoadChannelUtilization,
fsRrmAPIfLoadNumOfClients,
fsRrmAPIfPoorSNRClients,
fsRrmAPIfLoadName,
fsRrmAPIfLoadMacAddr,
fsRrmAPIfLoadSlotId,
fsRrmAPIfThroughput,
fsRrmAPIfInterferenceChannelNo,
fsRrmAPIfInterferencePower,
fsRrmAPIfInterferenceUtilization,
fsRrmAPIfInterferenceName,
fsRrmAPIfInterferenceMacAddr,
fsRrmAPIfInterferenceSlotId,
fsRrmAPIfNoiseChannelNo,
fsRrmAPIfDBNoisePower,
fsRrmAPIfNoiseName,
fsRrmAPIfNoiseMacAddr,
fsRrmAPIfNoiseSlotId,
fsRrmAPIfLoadProfileState,
fsRrmAPIfInterferenceProfileState,
fsRrmAPIfNoiseProfileState,
fsRrmAPIfCoverageProfileState,
fsRrmAPIfPerformanceProfileState,
fsRrmAPIfProfileName,
fsRrmAPIfProfileMacAddr,
fsRrmAPIfProfileSlotId,
fsRrmAPIfRxNeighborMacAddress,
fsRrmAPIfRxNeighborSlot,
fsRrmAPIfRxNeighborIpAddress,
fsRrmAPIfRxNeighborRSSI,
fsRrmAPIfRxNeighborSNR,
fsRrmAPIfRxNeighborChannel,
fsRrmAPIfRxNeighborChannelWidth,
fsRrmAPIfRxNeighborName,
fsRrmAPIfRxNeighborMacAddr,
fsRrmAPIfRxNeighborSlotId,
fsRrmAPIfStationRSSICoverageIndex,
fsRrmAPIfRSSILevel,
fsRrmAPIfStationCountOnRSSI,
fsRrmAPIfStationRSSIName,
fsRrmAPIfStationRSSIMacAddr,
fsRrmAPIfStationRSSISlotId,
fsRrmAPIfStationSNRCoverageIndex,
fsRrmAPIfSNRLevel,
fsRrmAPIfStationCountOnSNR,
fsRrmAPIfStationSNRName,
fsRrmAPIfStationSNRMacAddr,
fsRrmAPIfStationSNRSlotId,
fsRrmAPIfRecommendedChannelNumber,
fsRrmAPIfRecommendedTxPowerLevel,
fsRrmAPIfRecommendedRTSThreshold,
fsRrmAPIfRecommendedFragmentationThreshold,
fsRrmAPIfRecommendedName,
fsRrmAPIfRecommendedMacAddr,
fsRrmAPIfRecommendedSlotId,
fsRrmAPRadioID,
fsRrmAPRadioType,
fsRrmAPRealName,
fsRrmAPMacAddr,
fsRrmAPIfThroughputMacAddr,
fsRrmAPIfThroughputSlotId,
fsRrmAPIfThroughputAPName,
fsRrmAPIfThroughputRx,
fsRrmAPIfThroughputTx,
fsRrmAPIfThroughputTotal,
fsRrmAPSnrBSSIDMacAddr,
fsRrmAPSnrBSSIDSlotId,
fsRrmAPSnrBSSIDAPName,
fsRrmAPSnrBSSIDAverageSignalStrength,
fsRrmAPSnrBSSIDSignalPkts,
fsRrmAPSnrBSSIDHighestRxSignalStrength,
fsRrmAPSnrBSSIDLowestRxSignalStrength,
fsRrmAPSnrBSSIDSampleTime,
--Begin fsRrmDCA
fsRrmDot11bDynamicChannelAssignment,
fsRrmDot11bAnchorTime,
fsRrmDot11bChannalWidth11n,
fsRrmDot11bDynamicChannelUpdateInterval,
fsRrmDot11bDCASensitivity,
fsRrmDot11bForeignInterfereFactorEnable,
fsRrmDot11bLoadFactorEnable,
fsRrmDot11bNoiseFactorEnable,
fsRrmDot11bChannelUpdateCmdInvoke,
fsRrmDot11bDCAChannelIndex,
fsRrmDot11bDCAChannelOperation,
fsRrmDot11aDynamicChannelAssignment,
fsRrmDot11aAnchorTime,
fsRrmDot11aChannalWidth11n,
fsRrmDot11aDynamicChannelUpdateInterval,
fsRrmDot11aDCASensitivity,
fsRrmDot11aForeignInterfereFactorEnable,
fsRrmDot11aLoadFactorEnable,
fsRrmDot11aNoiseFactorEnable,
fsRrmDot11aChannelUpdateCmdInvoke,
fsRrmDot11aDCAChannelIndex,
fsRrmDot11aDCAChannelOperation,
--Begin fsRrmTPC
fsRrmDot11bDTPCSupport,
fsRrmDot11bDynamicTransmitPowerControl,
fsRrmDot11bDynamicTxPowerControlInterval,
fsRrmDot11bCurrentTxPowerLevel,
fsRrmDot11bPowerUpdateCmdInvoke,
fsRrmDot11bTXPowerThreshold,
fsRrmDot11bTPCNeighborNumber,
fsRrmDot11aDTPCSupport,
fsRrmDot11aDynamicTransmitPowerControl,
fsRrmDot11aDynamicTxPowerControlInterval,
fsRrmDot11aCurrentTxPowerLevel,
fsRrmDot11aPowerUpdateCmdInvoke,
fsRrmDot11aTXPowerThreshold,
fsRrmDot11aTPCNeighborNumber,
--Begin fsRrmCHD
fsRrmDot11bCoverageEnable,
fsRrmDot11bCoverageExceptionGlobal,
fsRrmDot11bCoverageLevelGlobal,
fsRrmDot11bCoverageDataRSSIThreshold,
fsRrmDot11bCoverageVoiceRSSIThreshold,
fsRrmDot11bCoverageDataPacketCount,
fsRrmDot11bCoverageVoicePacketCount,
fsRrmDot11bCoverageDataFailRate,
fsRrmDot11bCoverageVoiceFailRate,
fsRrmDot11aCoverageEnable,
fsRrmDot11aCoverageExceptionGlobal,
fsRrmDot11aCoverageLevelGlobal,
fsRrmDot11aCoverageDataRSSIThreshold,
fsRrmDot11aCoverageVoiceRSSIThreshold,
fsRrmDot11aCoverageDataPacketCount,
fsRrmDot11aCoverageVoicePacketCount,
fsRrmDot11aCoverageDataFailRate,
fsRrmDot11aCoverageVoiceFailRate,
--Begin fsRrmGroup
fsRrmDot11bGlobalAutomaticGrouping,
fsRrmDot11bGroupLeaderMacAddr,
fsRrmDot11bGroupLeader,
fsRrmDot11bGroupLastUpdateTime,
fsRrmDot11bGroupInterval,
fsRrmDot11bPeerMacAddress,
fsRrmDot11bPeerIpAddress,
fsRrmDot11bAPname,
fsRrmDot11bAPRadioID,
fsRrmDot11bAPChannel,
fsRrmDot11bAPTxPower,
fsRrmDot11bAPChannelRrmChangeFlag,
fsRrmDot11bAPTxPowerRrmChangeFlag,
fsRrmDot11bSummaryMacAddress,
fsRrmDot11aGlobalAutomaticGrouping,
fsRrmDot11aGroupLeader,
fsRrmDot11aGroupLastUpdateTime,
fsRrmDot11aGroupInterval,
fsRrmDot11aPeerMacAddress,
fsRrmDot11aPeerIpAddress,
fsRrmDot11aAPname,
fsRrmDot11aAPRadioID,
fsRrmDot11aAPChannel,
fsRrmDot11aAPTxPower,
fsRrmDot11aAPChannelRrmChangeFlag,
fsRrmDot11aAPTxPowerRrmChangeFlag,
fsRrmDot11aSummaryMacAddress,
--Begin fsRrmProfile
fsRrmDot11bForeignInterferenceThreshold,
fsRrmDot11bForeignNoiseThreshold,
fsRrmDot11bRFUtilizationThreshold,
fsRrmDot11bThroughputThreshold,
fsRrmDot11bMobilesThreshold,
fsRrmDot11aForeignInterferenceThreshold,
fsRrmDot11aForeignNoiseThreshold,
fsRrmDot11aRFUtilizationThreshold,
fsRrmDot11aThroughputThreshold,
fsRrmDot11aMobilesThreshold,
--Begin fsRrmMonitor
fsRrmDot11bMonitorEnable,
fsRrmDot11bChannelMonitorList,
fsRrmDot11bMonitorInterval,
fsRrmDot11bCoverageMeasurementInterval,
fsRrmDot11bLoadMeasurementInterval,
fsRrmDot11bNoiseMeasurementInterval,
fsRrmDot11bSignalMeasurementInterval,
fsRrmDot11bNeighborMessageInterval,
fsRrmDot11aMonitorEnable,
fsRrmDot11aChannelMonitorList,
fsRrmDot11aMonitorInterval,
fsRrmDot11aCoverageMeasurementInterval,
fsRrmDot11aLoadMeasurementInterval,
fsRrmDot11aNoiseMeasurementInterval,
fsRrmDot11aSignalMeasurementInterval,
fsRrmDot11aNeighborMessageInterval,
--Begin fsRrmFactory
fsRrmDot11bSetFactoryDefault,
fsRrmDot11aSetFactoryDefault
}
STATUS current
DESCRIPTION
"This collection of objects provide the information
about FS Radio Resource Management Configuration
Parameters. These objects are defined under fsRrmRrm object."
::= { fsRrmMIBGroups 1 }
fsRrmTrapsGroup OBJECT-GROUP
OBJECTS {
--Begin fsRrmTrapControl
fsRrmAPDot11bProfileTrapControlMask,
fsRrmAPDot11aProfileTrapControlMask,
fsRrmAPDot11bParamUpdateTrapControlMask,
fsRrmAPDot11aParamUpdateTrapControlMask,
--Begin fsRrmTrapVariable
-- for Ap info
fsRrmAPMacAddrTrapVariable,
fsRrmAPRadioIDTrapVariable,
fsRrmAPRadioTypeTrapVariable,
-- for Trap value
fsRrmClientNumberTrapVariable,
fsRrmForeignInterfereTrapVariable,
fsRrmNoiseTrapVariable,
fsRrmThroughputTrapVariable,
fsRrmUtilizationTrapVariable,
-- for TPC
fsRrmAPTxPowerBeforeChange,
fsRrmAPTxPowerAfterChange,
fsRrmAPTxPowerChangeCoverageFlag,
-- for DCA
fsRrmAPChannelNumberBeforeChannge,
fsRrmAPChannelNumberAfterChannge,
fsRrmAPChannelChangeReason,
fsRrmAPChannelChangeReasonValue,
fsRrmAPChannelChangeCount,
fsRrmDFSFreeCount,
-- for leader
fsRrmDot11bGroupLeaderMacAddrTrapVariable,
fsRrmDot11aGroupLeaderMacAddrTrapVariable
}
STATUS current
DESCRIPTION
"This collection of objects provide the information
about FS Trap Configuration and Trap definition.
These objects are defined under fsRrmTrap."
::= { fsRrmMIBGroups 2 }
fsRrmTrap NOTIFICATION-GROUP
NOTIFICATIONS {
fsRrmAPClientNumProfileFailed,
fsRrmAPLoadProfileFailed,
fsRrmAPNoiseProfileFailed,
fsRrmAPInterferenceProfileFailed,
fsRrmAPPerformanceProfileFailed,
fsRrmAPClientNumProfileUpdatedToPass,
fsRrmAPLoadProfileUpdatedToPass,
fsRrmAPNoiseProfileUpdatedToPass,
fsRrmAPInterferenceProfileUpdatedToPass,
fsRrmAPPerformanceProfileUpdatedToPass,
fsRrmAPCurrentTxPowerChanged,
fsRrmAPCurrentChannelChanged,
fsRrmDot11bGroupingDone,
fsRrmDot11aGroupingDone,
fsRrmDot11bDFSFreeCountBelowThreshold,
fsRrmDot11aDFSFreeCountBelowThreshold,
fsRrmNeighborAPInterference,
fsRrmStationInterference,
fsRrmOtherDiveceInterference
}
STATUS current
DESCRIPTION
"This collection of objects provides all notification
that Switch need to generate to the Management System."
::= { fsRrmMIBGroups 3 }
END
View Git Blame Copy Permalink