WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/enterasys/ENTERASYS-LSNAT-MIB

2618 lines
92 KiB
Plaintext
Raw Permalink Blame History

ENTERASYS-LSNAT-MIB DEFINITIONS ::= BEGIN
-- enterasys-lsnat-mib.txt
--
-- Part Number:
--
--
-- This module provides authoritative definitions for Enterasys
-- Networks Load Sharing Network Address Translation (LSNAT)
-- functionality.
--
-- This module will be extended, as needed.
-- Enterasys Networks reserves the right to make changes in this
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys Networks grants vendors, end-users, and other interested
-- parties a non-exclusive license to use this Specification in
-- connection with the management of Enterasys Networks products.
-- Copyright June, 2010 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
Unsigned32, Gauge32, Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus, TruthValue, DateAndTime
FROM SNMPv2-TC
InetVersion, InetAddressType, InetAddress, InetPortNumber,
InetAddressPrefixLength
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
etsysModules
FROM ENTERASYS-MIB-NAMES
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
etsysLsnatMIB MODULE-IDENTITY
LAST-UPDATED "201006011440Z" -- June 01, 2010, 2:40PM GMT
ORGANIZATION "Enterasys Networks, Inc"
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"The Enterasys Networks Proprietary MIB module for entities
implementing LSNAT."
REVISION "201006011440Z" -- June 01, 2010, 2:40PM GMT
DESCRIPTION "Initial version"
::= { etsysModules 74 }
-- -------------------------------------------------------------
-- LSNAT MIB Groups
-- -------------------------------------------------------------
etsysLsnatGlobal
OBJECT IDENTIFIER ::= { etsysLsnatMIB 1 }
etsysLsnatGlobalStats
OBJECT IDENTIFIER ::= { etsysLsnatGlobal 1 }
etsysLsnatGlobalIpv4Config
OBJECT IDENTIFIER ::= { etsysLsnatGlobal 2 }
etsysLsnatTables
OBJECT IDENTIFIER ::= { etsysLsnatMIB 2 }
etsysLsnatConformance
OBJECT IDENTIFIER ::= { etsysLsnatMIB 3 }
-- -------------------------------------------------------------
-- LSNAT Global Statistics Branch
-- -------------------------------------------------------------
etsysLsnatStatsRealsUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of Real servers currently
configured."
::= { etsysLsnatGlobalStats 1 }
etsysLsnatStatsServerfarmsUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of Server farms currently
configured."
::= { etsysLsnatGlobalStats 2 }
etsysLsnatStatsVserversUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of Virtual servers currently
configured."
::= { etsysLsnatGlobalStats 3 }
etsysLsnatStatsVserversIPsUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of Virtual IP addresses
currently configured."
::= { etsysLsnatGlobalStats 4 }
etsysLsnatStatsBindingsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current number of active LSNAT
bindings."
::= { etsysLsnatGlobalStats 5 }
etsysLsnatStatsBindingsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the highest number of active LSNAT
bindings at one time."
::= { etsysLsnatGlobalStats 6 }
etsysLsnatStatsBindingsDeleted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of LSNAT bindings
that have been deleted."
::= { etsysLsnatGlobalStats 7 }
etsysLsnatStatsBindingsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of LSNAT bindings
created."
::= { etsysLsnatGlobalStats 8 }
etsysLsnatStatsBindingsExhausted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of times a request to create
a LSNAT binding failed because there were no available free
entries."
::= { etsysLsnatGlobalStats 9 }
etsysLsnatStatsBindingsNoReals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of times a request to create
a LSNAT binding failed because there were no available Real
servers to establish a binding."
::= { etsysLsnatGlobalStats 10 }
etsysLsnatStatsBindingsNoPortmapPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of times a request to create
a LSNAT binding failed because there were no available Port
Map Port entries to establish a binding."
::= { etsysLsnatGlobalStats 11 }
etsysLsnatStatsBindingsNoFtpALG OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of times a request to create
a LSNAT binding failed because there were no available FTP
ALG's to establish a binding."
::= { etsysLsnatGlobalStats 12 }
etsysLsnatStatsBindingsPerSecond OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average number of LSNAT bindings
created per second. Normalized for 5 seconds."
::= { etsysLsnatGlobalStats 13 }
etsysLsnatStatsVserverActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of active Virtual server
entries."
::= { etsysLsnatGlobalStats 14 }
etsysLsnatStatsVserverHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the highest number of active Virtual
server entries at one time."
::= { etsysLsnatGlobalStats 15 }
etsysLsnatStatsServerfarmActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of active Server farm
entries."
::= { etsysLsnatGlobalStats 16 }
etsysLsnatStatsServerfarmHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the highest number of active Server farm
entries at one time."
::= { etsysLsnatGlobalStats 17 }
etsysLsnatStatsRealActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of active Real server
entries."
::= { etsysLsnatGlobalStats 18 }
etsysLsnatStatsRealHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the highest number of active Real server
entries at one time."
::= { etsysLsnatGlobalStats 19 }
etsysLsnatStatsStickyEntriesTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of LSNAT Sticky entries
created."
::= { etsysLsnatGlobalStats 20 }
etsysLsnatStatsStickyBindingsStuckTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number LSNAT stuck bindings
since this counter was last cleared, see etsysLsnatStatsClear."
::= { etsysLsnatGlobalStats 21 }
etsysLsnatStatsStickyBindingsStuckCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current number LSNAT stuck bindings."
::= { etsysLsnatGlobalStats 22 }
etsysLsnatStatsStickyActiveEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current number of active LSNAT Sticky
entries."
::= { etsysLsnatGlobalStats 23 }
etsysLsnatStatsStickyActiveEntriesHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the highest number of active LSNAT Sticky
entries at one time."
::= { etsysLsnatGlobalStats 24 }
etsysLsnatStatsStickyEntriesExhausted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of times a request to create
an LSNAT Sticky entry failed because there were no free Sticky
entries."
::= { etsysLsnatGlobalStats 25 }
etsysLsnatStatsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to a value of true(1) will clear LSNAT
statistics and cause the following objects to be reset to zero
and new values generated:
etsysLsnatStatsBindingsDeleted
etsysLsnatStatsBindingsTotal
etsysLsnatStatsBindingsExhausted
etsysLsnatStatsBindingsNoReals
etsysLsnatStatsBindingsNoPortmapPort
etsysLsnatStatsBindingsNoFtpALG
etsysLsnatStatsBindingsPerSecond
etsysLsnatStatsStickyEntriesTotal
etsysLsnatStatsStickyBindingsStuckTotal
etsysLsnatStatsStickyEntriesExhausted
etsysLsnatServerfarmHits
etsysLsnatServerfarmStateChanges
etsysLsnatRealServerHits
etsysLsnatRealServerStateChanges
etsysLsnatVserverConns
etsysLsnatVserverStateChanges
The following objects will be reset to the current active
counts:
etsysLsnatStatsBindingsHigh
etsysLsnatStatsVserverHigh
etsysLsnatStatsServerfarmHigh
etsysLsnatStatsRealHigh
etsysLsnatStatsStickyActiveEntriesHigh
Setting this object to a value of false(2) has no effect.
This object will always return a value of false(2)."
DEFVAL { false }
::= { etsysLsnatGlobalStats 26 }
etsysLsnatStatsClearDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date / time the LSNAT statistics were cleared."
::= { etsysLsnatGlobalStats 27 }
etsysLsnatStatsRealServerAccessClientsCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of etsysLsnatRealServerAccessClientEntry in the
etsysLsnatRealServerAccessClientTable"
::= { etsysLsnatGlobalStats 28 }
etsysLsnatStatsMinTimeoutValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum timeout value allowable for LSNAT timeouts."
::= { etsysLsnatGlobalStats 29 }
etsysLsnatStatsMaxTimeoutValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum timeout value allowable for LSNAT timeouts."
::= { etsysLsnatGlobalStats 30 }
-- -------------------------------------------------------------
-- LSNAT Global Ipv4 Config Branch
-- -------------------------------------------------------------
etsysLsnatIpv4ConfigFTPCtrlPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the IPv4 FTP Control Port used by
LSNAT."
DEFVAL { 21 }
::= { etsysLsnatGlobalIpv4Config 1 }
etsysLsnatIpv4ConfigTFTPCtrlPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the IPv4 TFTP Control Port used by
LSNAT."
DEFVAL { 69 }
::= { etsysLsnatGlobalIpv4Config 2 }
etsysLsnatIpv4ConfigRealServerAccess OBJECT-TYPE
SYNTAX INTEGER {
restricted(1),
unrestricted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls IPv4 Client access to Real Servers.
- `restricted', indicates direct user access to LSNAT
configured Real servers using destination ports
configured by the Real servers, will not be allowed
for any user.
- `unrestricted', indicates direct access to all services on
LSNAT configured Real servers will be allowed for all
users."
DEFVAL { restricted }
::= { etsysLsnatGlobalIpv4Config 3 }
etsysLsnatIpv4ConfigFinRstTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout value after TCP FIN/RST observed on IPv4 NAT
bindings. Setting a value of '0' results in this feature
being disabled."
DEFVAL { 3 }
::= { etsysLsnatGlobalIpv4Config 4 }
etsysLsnatIpv4ConfigFinRstTimeoutHalfClosedStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the IPv4 TCP FIN/RST timeout will
apply to bindings only when the hardware connections have
aged out.
- `disabled', indicates the IPv4 TCP FIN/RST timeout does not
apply to half closed bindings.
- `enabled', indicates the IPv4 TCP FIN/RST timeout applies
to half closed bindings."
DEFVAL { enabled }
::= { etsysLsnatGlobalIpv4Config 5 }
-- -------------------------------------------------------------
-- LSNAT Global Real Server Access Client Table
-- -------------------------------------------------------------
etsysLsnatRealServerAccessClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatRealServerAccessClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries defining a subnet of Client IP addresses
that will be allowed direct access to all Real servers."
::={ etsysLsnatTables 1 }
etsysLsnatRealServerAccessClientEntry OBJECT-TYPE
SYNTAX EtsysLsnatRealServerAccessClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatRealServerAccessClientTable
defining a subnet of Client IP addresses for this Client
Access Table entry. The Real Server Access Client Table entry
defines a subnet of Client IP addresses that will be allowed
direct access to all Real servers."
INDEX { etsysLsnatRealServerAccessClientAddressType,
etsysLsnatRealServerAccessClientIp,
etsysLsnatRealServerAccessClientPrefixLen }
::= { etsysLsnatRealServerAccessClientTable 1 }
EtsysLsnatRealServerAccessClientEntry ::=
SEQUENCE {
etsysLsnatRealServerAccessClientAddressType
InetAddressType,
etsysLsnatRealServerAccessClientIp
InetAddress,
etsysLsnatRealServerAccessClientPrefixLen
InetAddressPrefixLength,
etsysLsnatRealServerAccessClientRowStatus
RowStatus
}
etsysLsnatRealServerAccessClientAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this property affects the size and format of
etsysLsnatRealServerAccessClientIp."
::= { etsysLsnatRealServerAccessClientEntry 1 }
etsysLsnatRealServerAccessClientIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address for this subnet of IP addresses defining this
LSNAT Real Server Access Client entry."
::= { etsysLsnatRealServerAccessClientEntry 2 }
etsysLsnatRealServerAccessClientPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the IP network mask for this LSNAT Real Server
Access Client entry. The values for the index objects
etsysLsnatRealServerAccessClientIp and
etsysLsnatRealServerAccessClientPrefixLen must be
consistent."
::= { etsysLsnatRealServerAccessClientEntry 3 }
etsysLsnatRealServerAccessClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other
objects in the conceptual row can be modified.
The only allowable row status of this conceptual row in the
table are:
active(1)
- The Real Server Access Client entry is available for use in
LSNAT operations.
createAndGo(4)
- This is the preferred mechanism for creating conceptual rows
in this table. Errors resulting from invalid
etsysLsnatRealServerAccessClientIp and
etsysLsnatRealServerAccessClientPrefixLen when creating the
LSNAT entry will result in the row not being created. There
are no other writable leaves so a successful createAndGo will
always transition a new entry to the active(1) state.
destroy(6)
- This will remove the etsysLsnatRealServerAccessClientEntry
from the etsysLsnatRealServerAccessClientTable and make it
unavailable for LSNAT operations."
::= { etsysLsnatRealServerAccessClientEntry 4 }
-- -------------------------------------------------------------
-- LSNAT Server Farm Table
-- -------------------------------------------------------------
etsysLsnatServerfarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatServerfarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing objects defining the configuration
parameters, operational state and runtime statistics of
LSNAT Server farms."
::={ etsysLsnatTables 2 }
etsysLsnatServerfarmEntry OBJECT-TYPE
SYNTAX EtsysLsnatServerfarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatServerfarmTable containing the
operational characteristics of an LSNAT Server farm. An LSNAT
Server farm contains a grouping of Real servers
(etsysLsnatRealServerEntry) that load balancing requests will
use to distribute the request load."
INDEX { etsysLsnatServerfarmInetVersion,
etsysLsnatServerfarmName }
::= { etsysLsnatServerfarmTable 1 }
EtsysLsnatServerfarmEntry ::=
SEQUENCE {
etsysLsnatServerfarmInetVersion
InetVersion,
etsysLsnatServerfarmName
SnmpAdminString,
etsysLsnatServerfarmPredictor
INTEGER,
etsysLsnatServerfarmAdminStatus
INTEGER,
etsysLsnatServerfarmOperStatus
INTEGER,
etsysLsnatServerfarmConns
Gauge32,
etsysLsnatServerfarmHits
Counter32,
etsysLsnatServerfarmStateChanges
Counter32,
etsysLsnatServerfarmLastStateChangeDateAndTime
DateAndTime,
etsysLsnatServerfarmRealsCfg
Gauge32,
etsysLsnatServerfarmRealsUp
Gauge32,
etsysLsnatServerfarmVserversCfg
Gauge32,
etsysLsnatServerfarmRowStatus
RowStatus
}
etsysLsnatServerfarmInetVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address version of the LSNAT Server farm."
::= { etsysLsnatServerfarmEntry 1 }
etsysLsnatServerfarmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the unique name of the LSNAT Server
farm."
::= { etsysLsnatServerfarmEntry 2 }
etsysLsnatServerfarmPredictor OBJECT-TYPE
SYNTAX INTEGER {
roundrobin(1),
leastconns(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the Predictor value. The predictor value
defines the method of selecting the appropriate Real server
when a new binding request is generated.
- `roundrobin', indicates the Real server will be selected
using a round robin algorithm.
- `leastconns', indicates the Real server will be selected
based on the fewest active connections on the Real servers."
DEFVAL { roundrobin }
::= { etsysLsnatServerfarmEntry 3 }
etsysLsnatServerfarmAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the Administrative state of the Server
farm.
- `disabled', indicates the Server farm is administratively
disabled.
- `enabled', indicates the Server farm is administratively
enabled."
DEFVAL { enabled }
::= { etsysLsnatServerfarmEntry 4 }
etsysLsnatServerfarmOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Operational state of the LSNAT Server
farm. The state of the LSNAT Server farm will be deemed 'up'
when the row is 'active', the etsysLsnatServerfarmAdminStatus
is 'enabled' and at least one etsysLsnatRealServerEntry has
been associated with this entry and the
etsysLsnatRealServerOperStatus is 'up'.
- `up', indicates the LSNAT Server farm is operationally ready.
- `down', indicates the LSNAT Server farm is operationally
unavailable."
::= { etsysLsnatServerfarmEntry 5 }
etsysLsnatServerfarmConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active LSNAT connections established on
this LSNAT Server farm."
::= { etsysLsnatServerfarmEntry 6 }
etsysLsnatServerfarmHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of hits this LSNAT Server farm has
received."
::= { etsysLsnatServerfarmEntry 7 }
etsysLsnatServerfarmStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of operational state changes (see
etsysLsnatServerfarmOperStatus) for this LSNAT Server farm."
::= { etsysLsnatServerfarmEntry 8 }
etsysLsnatServerfarmLastStateChangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date / time the last LSNAT Server farm state change."
::= { etsysLsnatServerfarmEntry 9 }
etsysLsnatServerfarmRealsCfg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Real servers (etsysLsnatRealServerEntry)
currently configured on this LSNAT Server farm."
::= { etsysLsnatServerfarmEntry 10 }
etsysLsnatServerfarmRealsUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Real servers (etsysLsnatRealServerEntry)
currently configured on this LSNAT Server farm with a
etsysLsnatRealServerOperStatus of 'up'."
::= { etsysLsnatServerfarmEntry 11 }
etsysLsnatServerfarmVserversCfg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Virtual servers (etsysLsnatVserversEntry)
currently configured using this LSNAT Server farm
(etsysLsnatVserverServerfarmName)."
::= { etsysLsnatServerfarmEntry 12 }
etsysLsnatServerfarmRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other
objects in the conceptual row can be modified.
The only allowable row status of this conceptual row in the
table are:
active(1)
- The Server farm entry is available for use by LSNAT
operations. Other writable leaves in this table MAY be
modified while the row is in the active state.
createAndGo(4)
- This is the preferred mechanism for creating conceptual rows
in this table. A valid createAndGo requires a unique
etsysLsnatServerfarmName, errors resulting from existing
etsysLsnatServerfarmName's will result in the row not being
created. All writable leaves have default values so a valid
createAndGo will always transition a new entry to the
active(1) state.
destroy(6)
- This will remove the etsysLsnatServerfarmEntry from the
etsysLsnatServerfarmTable and make it unavailable for LSNAT
operations. This will result in all associated LSNAT Real
Server Table entries (etsysLsnatRealServerEntry) to also be
deleted.
In addition deleting this entry will result in the
etsysLsnatVserverServerfarmName leaf of any associated
etsysLsnatVserverEntry's to be set to the unassigned value
and if the Virtual server had been in a state
(etsysLsnatVserverOperStatus) of 'up' it would result in the
Virtual server transitioning it's state to 'down'."
::= { etsysLsnatServerfarmEntry 13 }
-- -------------------------------------------------------------
-- LSNAT Real Server Table
-- -------------------------------------------------------------
etsysLsnatRealServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatRealServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing objects defining the configuration
parameters, operational states and runtime statistics of
LSNAT Real servers."
::={ etsysLsnatTables 3 }
etsysLsnatRealServerEntry OBJECT-TYPE
SYNTAX EtsysLsnatRealServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatRealServerTable containing the
operational characteristics of an LSNAT Real server and its
association with an LSNAT Server farm. An LSNAT Real server is
a local server on which Virtual server requests will be
directed for services defined by the Virtual server."
INDEX { etsysLsnatRealServerAddressType,
etsysLsnatServerfarmName,
etsysLsnatRealServerIp,
etsysLsnatRealServerPort }
::= { etsysLsnatRealServerTable 1 }
EtsysLsnatRealServerEntry ::=
SEQUENCE {
etsysLsnatRealServerAddressType
InetAddressType,
etsysLsnatRealServerIp
InetAddress,
etsysLsnatRealServerPort
InetPortNumber,
etsysLsnatRealServerWeight
Unsigned32,
etsysLsnatRealServerMaxConns
Unsigned32,
etsysLsnatRealServerFailDetectType
INTEGER,
etsysLsnatRealServerFailDetectProbeOne
SnmpAdminString,
etsysLsnatRealServerFailDetectProbeTwo
SnmpAdminString,
etsysLsnatRealServerAdminStatus
INTEGER,
etsysLsnatRealServerOperStatus
INTEGER,
etsysLsnatRealServerConns
Gauge32,
etsysLsnatRealServerHits
Counter32,
etsysLsnatRealServerStateChanges
Counter32,
etsysLsnatRealServerLastStateChangeDateAndTime
DateAndTime,
etsysLsnatRealServerRowStatus
RowStatus
}
etsysLsnatRealServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this property affects the size and format of
etsysLsnatRealServerIp. This value must be consistent with the
value set in the etsysLsnatServerfarmInetVersion for the Server
farm defined by etsysLsnatServerfarmName."
::= { etsysLsnatRealServerEntry 1 }
etsysLsnatRealServerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The assigned IP addresses identifying this Real server."
::= { etsysLsnatRealServerEntry 2 }
etsysLsnatRealServerPort OBJECT-TYPE
SYNTAX InetPortNumber (0|1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service port used when accessing this Real server. A
value of zero indicates that all ports can be used by Virtual
servers accessing this Real server."
::= { etsysLsnatRealServerEntry 3 }
etsysLsnatRealServerWeight OBJECT-TYPE
SYNTAX Unsigned32 (1..155)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A weight assigned to this Real server to be used in selecting
this Real server over other created Real servers for LSNAT
connections. This value is only significant when the
etsysLsnatServerfarmPredictor for the associated LSNAT
Server farm is set to 'roundrobin'."
DEFVAL { 1 }
::= { etsysLsnatRealServerEntry 4 }
etsysLsnatRealServerMaxConns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of LSNAT connections allowed for this Real
server at any one time. While the current number of
connections (etsysLsnatRealServerConns) equals this value this
Real server will no longer be considered for new LSNAT
connections. A value of zero indicates that there is no limit."
DEFVAL { 0 }
::= { etsysLsnatRealServerEntry 5 }
etsysLsnatRealServerFailDetectType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
probe(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the fail detect type assigned to this
Real server.
- `none', indicates there is no fail detection used to verify
the operational state of the Real Server.
- `probe', indicates that probes are used to verify the
operational state or the Real server."
DEFVAL { probe }
::= { etsysLsnatRealServerEntry 6 }
etsysLsnatRealServerFailDetectProbeOne OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of probe one assigned to the Real Server. Probes are
used to verify the operational state of the Real Server. A null
string indicates that probe one is not assigned."
DEFVAL { "" }
::= { etsysLsnatRealServerEntry 7 }
etsysLsnatRealServerFailDetectProbeTwo OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of probe two assigned to the Real Server. Probes are
used to verify the operational state of the Real Server. A null
string indicates that probe two is not assigned."
DEFVAL { "" }
::= { etsysLsnatRealServerEntry 8 }
etsysLsnatRealServerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the administrative state of the Real
server.
- `disabled', indicates the Real server is administratively
disabled.
- `enabled', indicates the Real server is administratively
enabled."
DEFVAL { disabled }
::= { etsysLsnatRealServerEntry 9 }
etsysLsnatRealServerOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the operational state of the Real server.
The state of the Real server will be deemed 'up' when the row
is 'active', the etsysLsnatRealServerAdminStatus is 'enabled'
and a positive response is received from the configured fail
detect request.
- `up', indicates the Real server is operationally ready.
- `down', indicates the Real server is operationally
unavailable."
::= { etsysLsnatRealServerEntry 10 }
etsysLsnatRealServerConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active LSNAT connections established
using this Real server."
::= { etsysLsnatRealServerEntry 11 }
etsysLsnatRealServerHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of hits this Real server has received."
::= { etsysLsnatRealServerEntry 12 }
etsysLsnatRealServerStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of state changes (see
etsysLsnatRealServerOperStatus) for this Real server."
::= { etsysLsnatRealServerEntry 13 }
etsysLsnatRealServerLastStateChangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date / time the last LSNAT Real server state change."
::= { etsysLsnatRealServerEntry 14 }
etsysLsnatRealServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other
objects in the conceptual row can be modified.
The only allowable row status of this conceptual row in the
table are:
active(1)
- The Real server entry is available for use by LSNAT
operations. Other writable leaves in this table MAY be
modified while the row is in the active state.
createAndGo(4)
- This is the preferred mechanism for creating conceptual rows
in this table. A valid server farm identified by
etsysLsnatServerfarmName must be present. Also errors
resulting from an invalid etsysLsnatRealServerIp or
etsysLsnatRealServerPort when creating the LSNAT entry will
result in the row not being created. All writable leaves
have default values so a valid createAndGo will always
transition a new entry to the active(1) state.
destroy(6)
- This will remove the etsysLsnatRealServerEntry from the
etsysLsnatRealServerTable and make it unavailable for LSNAT
operations."
::= { etsysLsnatRealServerEntry 15 }
-- -------------------------------------------------------------
-- LSNAT Virtual Server Table
-- -------------------------------------------------------------
etsysLsnatVserverTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatVserverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing objects defining the configuration
parameters, operational states and runtime statistics of
LSNAT Virtual servers."
::={ etsysLsnatTables 4 }
etsysLsnatVserverEntry OBJECT-TYPE
SYNTAX EtsysLsnatVserverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatVserverTable containing the
operational characteristics of a Virtual server. A Virtual
server provides load sharing between multiple servers grouped
into Server farms that can be tailored to an individual
service or all services, without requiring any modification to
clients or servers."
INDEX { etsysLsnatVserverInetVersion,
etsysLsnatVserverName }
::= { etsysLsnatVserverTable 1 }
EtsysLsnatVserverEntry ::=
SEQUENCE {
etsysLsnatVserverInetVersion
InetVersion,
etsysLsnatVserverName
SnmpAdminString,
etsysLsnatVserverServerfarmName
SnmpAdminString,
etsysLsnatVserverIdleTimeout
Unsigned32,
etsysLsnatVserverStickyType
INTEGER,
etsysLsnatVserverStickyTimeout
Unsigned32,
etsysLsnatVserverUDPOneShot
INTEGER,
etsysLsnatVserverVrrpInterface
InterfaceIndexOrZero,
etsysLsnatVserverVrrpVrid
Unsigned32,
etsysLsnatVserverSourceNatPoolName
SnmpAdminString,
etsysLsnatVserverAdminStatus
INTEGER,
etsysLsnatVserverOperStatus
INTEGER,
etsysLsnatVserverLastStateChangeReason
SnmpAdminString,
etsysLsnatVserverLastStateChangeDateAndTime
DateAndTime,
etsysLsnatVserverConns
Gauge32,
etsysLsnatVserverHits
Counter32,
etsysLsnatVserverStateChanges
Counter32,
etsysLsnatVserverVirtualAddressStatus
INTEGER,
etsysLsnatVserverClientCount
Counter32,
etsysLsnatVserverRowStatus
RowStatus,
etsysLsnatVserverBindingMatchSourcePort
INTEGER
}
etsysLsnatVserverInetVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address version of the LSNAT Virtual server."
::= { etsysLsnatVserverEntry 1 }
etsysLsnatVserverName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the unique name of the LSNAT Virtual
server."
::= { etsysLsnatVserverEntry 2 }
etsysLsnatVserverServerfarmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Server farm name (etsysLsnatServerfarmName) specifying the
Server farm to be assigned to this Virtual server entry. The
value of etsysLsnatVserverInetVersion must be consistent with
the value of etsysLsnatServerfarmInetVersion defined by this
etsysLsnatVserverServerfarmName. Setting this value requires
etsysLsnatVserverAdminStatus to be set to 'disabled'. A null
string results in no Virtual server Server farm entry being
assigned to this Virtual server."
DEFVAL { "" }
::= { etsysLsnatVserverEntry 3 }
etsysLsnatVserverIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The idle timeout value for bindings created using this
Virtual server."
DEFVAL { 240 }
::= { etsysLsnatVserverEntry 4 }
etsysLsnatVserverStickyType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
sip(2),
sipDipDport(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the type of 'sticky' entry created when
accessing this LSNAT Virtual server.
- `none', indicates no LSNAT sticky entries will be created.
- `sip', indicates that LSNAT sticky entries will be created
based on the source IP address.
- `sipDipDport', indicates that LSNAT sticky entries will be
created based on source IP address, destination IP address
and the destination port."
DEFVAL { none }
::= { etsysLsnatVserverEntry 5 }
etsysLsnatVserverStickyTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The timeout value for sticky entries created using this
Virtual server."
DEFVAL { 7200 }
::= { etsysLsnatVserverEntry 6 }
etsysLsnatVserverUDPOneShot OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables the UDP One Shot feature for this LSNAT
Virtual server.
- `disabled', UDP One Shot is disabled.
- `enabled', UDP One Shot is enabled."
DEFVAL { disabled }
::= { etsysLsnatVserverEntry 7 }
etsysLsnatVserverVrrpInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex used in conjunction with the Virtual Router Index
(VRID) etsysLsnatVserverVrrpVrid to describe the associated
VRRP. A properly configured entry will also include a
non-default entry for the VRID (etsysLsnatVserverVrrpVrid).
A transitioning of the VRRP defined by this entry and
etsysLsnatVserverVrrpVrid to a state of anything but 'master'
will result in the Virtual server etsysLsnatVserverOperStatus
transitioning to a state of 'down'. A non zero value must
also be set in etsysLsnatVserverVrrpVrid for this entry to be
configured properly. A value of '0' in
etsysLsnatVserverVrrpInterface and etsysLsnatVserverVrrpVrid
indicates that there is no VRRP associated with this Virtual
server."
DEFVAL { 0 }
::= { etsysLsnatVserverEntry 8 }
etsysLsnatVserverVrrpVrid OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Virtual Router Index (VRID) used in conjunction with the
(ifIndex) etsysLsnatVserverVrrpInterface to describe
the associated VRRP. A properly configured entry will include
a non-default entry for the VLAN interface
(etsysLsnatVserverVrrpInterface). A non zero value must also
be set in etsysLsnatVserverVrrpVrid for this entry to be
configured properly. A value of '0' in
etsysLsnatVserverVrrpInterface and etsysLsnatVserverVrrpVrid
indicates that there is no VRRP associated with this Virtual
server."
DEFVAL { 0}
::= { etsysLsnatVserverEntry 9 }
etsysLsnatVserverSourceNatPoolName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The NAT pool name (etsysNatPoolName) defined as part of
the etsysNatMIB specifying the NAT pool to be assigned to this
Virtual server entry. A null string results in no Virtual
server Source NAT Pool entry being assigned to this Virtual
server. "
DEFVAL { "" }
::= { etsysLsnatVserverEntry 10 }
etsysLsnatVserverAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the administrative state of the Virtual
server.
- `disabled', indicates the Virtual server is administratively
disabled.
- `enabled', indicates the Virtual server is administratively
enabled. An entry must exist in the
etsysLsnatVserverVirtualAddressTable associated to this
Virtual server for this leaf to be set to 'enabled'."
DEFVAL { disabled }
::= { etsysLsnatVserverEntry 11 }
etsysLsnatVserverOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the operational state of this Virtual
server. The state of this Virtual server will be deemed 'up'
when the row is 'active', the etsysLsnatVserverAdminStatus is
'enabled', a Server farm has been assigned with the
etsysLsnatVserverServerfarmName leaf and that
etsysLsnatServerfarmEntry has a state
(etsysLsnatServerfarmOperStatus) of 'up' and the VRRP defined
by etsysLsnatVserverVrrpInterface and
etsysLsnatVserverVrrpVrid is returning a state of 'master'.
- `up', indicates the Virtual server is operationally ready.
- `down', indicates the Virtual server is operationally
unavailable."
::= { etsysLsnatVserverEntry 12 }
etsysLsnatVserverLastStateChangeReason OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the reason for the last Virtual server
state (etsysLsnatVserverOperStatus) change."
::= { etsysLsnatVserverEntry 13 }
etsysLsnatVserverLastStateChangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date / time the last LSNAT Virtual server state change."
::= { etsysLsnatVserverEntry 14 }
etsysLsnatVserverConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active LSNAT connections established on
this Virtual server."
::= { etsysLsnatVserverEntry 15 }
etsysLsnatVserverHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of hits this LSNAT Virtual server has
received."
::= { etsysLsnatVserverEntry 16 }
etsysLsnatVserverStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of state changes (see
etsysLsnatVserverOperStatus) for this Virtual server."
::= { etsysLsnatVserverEntry 17 }
etsysLsnatVserverVirtualAddressStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the state of the vserver's virtual
address info. See etsysLsnatVserverVirtualAddressTable
- `invalid', indicates the Vserver does not have a valid
virtual address
- `valid', indicates the Vserver has a valid virtual address"
::= { etsysLsnatVserverEntry 18 }
etsysLsnatVserverClientCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of clients configured to the vserver.
See etsysLsnatVserverClientTable"
::= { etsysLsnatVserverEntry 19 }
etsysLsnatVserverRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other objects
in the conceptual row can be modified.
The only allowable row status of this conceptual row in the
table are:
active(1)
- The Virtual server entry is available for use by LSNAT
operations. Other writable leaves in this table MAY be
modified while the row is in the active state.
createAndGo(4)
- This is the preferred mechanism for creating conceptual rows
in this table. A valid createAndGo requires a unique
etsysLsnatVserverName, errors resulting from existing
etsysLsnatVserverNames will result in the row not being
created. All writable leaves have default values so a valid
createAndGo will always transition a new entry to the
active(1) state.
destroy(6)
- This will remove the etsysLsnatVserverEntry from the
etsysLsnatVserverTable and make it unavailable for LSNAT
operations. This will result in any associated LSNAT Virtual
server Virtual Address Table entries
(etsysLsnatVserverVirtualAddressEntry) and LSNAT Client
Access Table entries (etsysLsnatClientAccessEntry) to also be
deleted."
::= { etsysLsnatVserverEntry 20 }
etsysLsnatVserverBindingMatchSourcePort OBJECT-TYPE
SYNTAX INTEGER {
exact(1),
any(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object modifies the mode in which a vserver creates
bindings.
- `exact', creates bindings that match the client UDP/TCP source
port.
- `any', creates bindings that match any client UDP/TCP source
port."
DEFVAL { exact }
::= { etsysLsnatVserverEntry 21 }
-- -------------------------------------------------------------
-- LSNAT Virtual Server Virtual Address Table
-- -------------------------------------------------------------
etsysLsnatVserverVirtualAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatVserverVirtualAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries defining the Virtual configuration
associated with the Virtual server identified by
etsysLsnatVserverName."
::={ etsysLsnatTables 5 }
etsysLsnatVserverVirtualAddressEntry OBJECT-TYPE
SYNTAX EtsysLsnatVserverVirtualAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatVserverVirtualAddressTable defining
Virtual configuration for this Virtual server Virtual Table
entry. The Virtual server Virtual Table entry defines IP
addresses, protocol, port and access for the Virtual server
identified by etsysLsnatVserverName. An entry must exist
for (etsysLsnatVserverAdminStatus) of the associated
Virtual server (etsysLsnatVserverName) to be set to
'enabled'."
INDEX { etsysLsnatVserverVirtualAddressType,
etsysLsnatVserverName,
etsysLsnatVserverVirtualAddressFirstIp,
etsysLsnatVserverVirtualAddressLastIp,
etsysLsnatVserverVirtualAddressProtocol,
etsysLsnatVserverVirtualAddressPort,
etsysLsnatVserverVirtualAddressServiceType,
etsysLsnatVserverVirtualAddressAllVrfs }
::= { etsysLsnatVserverVirtualAddressTable 1 }
EtsysLsnatVserverVirtualAddressEntry ::=
SEQUENCE {
etsysLsnatVserverVirtualAddressType
InetAddressType,
etsysLsnatVserverVirtualAddressFirstIp
InetAddress,
etsysLsnatVserverVirtualAddressLastIp
InetAddress,
etsysLsnatVserverVirtualAddressProtocol
INTEGER,
etsysLsnatVserverVirtualAddressPort
InetPortNumber,
etsysLsnatVserverVirtualAddressServiceType
INTEGER,
etsysLsnatVserverVirtualAddressAllVrfs
INTEGER,
etsysLsnatVserverVirtualAddressRowStatus
RowStatus
}
etsysLsnatVserverVirtualAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this property affects the size and format of
etsysLsnatVserverVirtualAddressFirstIp and
etsysLsnatVserverVirtualAddressLastIp. This value must be
consistent with the etsysLsnatVserverInetVersion defined by
etsysLsnatVserverName."
::= { etsysLsnatVserverVirtualAddressEntry 1 }
etsysLsnatVserverVirtualAddressFirstIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The starting IP address for this range of IP addresses
defining this LSNAT Virtual configuration."
::= { etsysLsnatVserverVirtualAddressEntry 2 }
etsysLsnatVserverVirtualAddressLastIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ending IP address for this range of IP addresses defining
this LSNAT Virtual configuration. A value identical to
etsysLsnatVserverVirtualFirstIp will indicate a range of one
address."
::= { etsysLsnatVserverVirtualAddressEntry 3 }
etsysLsnatVserverVirtualAddressProtocol OBJECT-TYPE
SYNTAX INTEGER {
tcp(1),
udp(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the protocol type for this Virtual
configuration.
- `tcp', indicates that the Virtual configuration will use TCP
protocol.
- `udp', indicates that the Virtual configuration will use UDP
protocol."
::= { etsysLsnatVserverVirtualAddressEntry 4 }
etsysLsnatVserverVirtualAddressPort OBJECT-TYPE
SYNTAX InetPortNumber (0|1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port used when accessing this Virtual configuration. A
value of '0' indicates that all ports are usable."
::= { etsysLsnatVserverVirtualAddressEntry 5 }
etsysLsnatVserverVirtualAddressServiceType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ftp(1),
tftp(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the optional service allowed for this
Virtual configuration.
- 'none', there is no optional service provided.
- `ftp', indicates that the Virtual configuration service type
is FTP. The service type can only be set to 'ftp' if the
etsysLsnatVserverVirtualProtocol type is set to 'tcp'.
- `tftp', indicates that the Virtual configuration service type
is TFTP. The service type can only be set to 'tftp' if the
etsysLsnatVserverVirtualProtocol type is set to 'udp'."
::= { etsysLsnatVserverVirtualAddressEntry 6 }
etsysLsnatVserverVirtualAddressAllVrfs OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines if this Virtual configuration will be
reachable via all VRFs.
- 'disabled', the Virtual server identified by
etsysLsnatVserverName will not be reachable from all
VRFs.
- 'enabled', the Virtual server identified by
etsysLsnatVserverName will be reachable from all VRFs."
::= { etsysLsnatVserverVirtualAddressEntry 7 }
etsysLsnatVserverVirtualAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other
objects in the conceptual row can be modified.
The only allowable row status of this conceptual row in the
table are:
active(1)
- The Virtual server Virtual configuration entry is available
for use in LSNAT operations and is associated with the
Virtual server defined by etsysLsnatVserverName.
createAndGo(4)
- This is the preferred mechanism for creating conceptual rows
in this table. A valid etsysLsnatVserverName must be
present. Also errors resulting from:
- Invalid etsysLsnatVserverVirtualAddressFirstIp and
etsysLsnatVserverVirtualAddressLastIp combinations.
- etsysLsnatVserverVirtualAddressType inconsistencies with
the etsysLsnatVserverInetVersion associated with the
etsysLsnatVserverName.
- Inconsistent values assigned to
etsysLsnatVserverVirtualAddressProtocol and
etsysLsnatVserverVirtualAddressServiceType.
when creating the LSNAT entry will result in the row not
being created.
Creating this entry requires the associated Virtual server
etsysLsnatVserverAdminStatus, identified by
etsysLsnatVserverName, to have a status of 'disabled'.
Already existing etsysLsnatVserverVirtualAddressEntrys
associated with the Virtual Server identified by
etsysLsnatVserverName will result in the original entry being
deleted and a new entry created.
There are no other writable leaves so a successful
createAndGo will always transition a new entry to the
active(1) state.
destroy(6)
- This will remove the etsysLsnatVserverVirtualAddressEntry
from the etsysLsnatVserverVirtualAddressTable and make it
unavailable for LSNAT operations. Deleting this entry
requires the associated Virtual server
etsysLsnatVserverAdminStatus, identified by
etsysLsnatVserverName, to have a status of 'disabled'."
::= { etsysLsnatVserverVirtualAddressEntry 8 }
-- -------------------------------------------------------------
-- LSNAT Client Access Table
-- -------------------------------------------------------------
etsysLsnatVserverClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatVserverClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries defining a subnet of Client IP addresses
that will be allowed direct access to the Real servers
associated with the Virtual server identified by
etsysLsnatVserverName."
::={ etsysLsnatTables 6 }
etsysLsnatVserverClientEntry OBJECT-TYPE
SYNTAX EtsysLsnatVserverClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatVserverClientTable defining
a subnet of Client IP addresses for this Virtual server Client
Access Table entry. The Virtual server Client Access Table
entry defines a subnet of Client IP addresses that will be
allowed direct access to the Real servers associated with this
Virtual server while this Virtual server is active."
INDEX { etsysLsnatVserverClientAddressType,
etsysLsnatVserverName,
etsysLsnatVserverClientIp,
etsysLsnatVserverClientPrefixLen }
::= { etsysLsnatVserverClientTable 1 }
EtsysLsnatVserverClientEntry ::=
SEQUENCE {
etsysLsnatVserverClientAddressType
InetAddressType,
etsysLsnatVserverClientIp
InetAddress,
etsysLsnatVserverClientPrefixLen
InetAddressPrefixLength,
etsysLsnatVserverClientRowStatus
RowStatus
}
etsysLsnatVserverClientAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this property affects the size and format of
etsysLsnatVserverClientIp. This value must be consistent with
the etsysLsnatVserverInetVersion defined by
etsysLsnatVserverName."
::= { etsysLsnatVserverClientEntry 1 }
etsysLsnatVserverClientIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address for this subnet of IP addresses defining this
LSNAT Virtual server Client Access entry."
::= { etsysLsnatVserverClientEntry 2 }
etsysLsnatVserverClientPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the IP network mask for this LSNAT Virtual
server Client Access entry. The values for the index objects
etsysLsnatVserverClientIp and
etsysLsnatVserverClientPrefixLen must be consistent."
::= { etsysLsnatVserverClientEntry 3 }
etsysLsnatVserverClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other
objects in the conceptual row can be modified.
The only allowable row status of this conceptual row in the
table are:
active(1)
- The Virtual server Client Access entry is available for use
in LSNAT operations.
createAndGo(4)
- This is the preferred mechanism for creating conceptual rows
in this table. A valid etsysLsnatVserverName must be
present. Also errors resulting from invalid
etsysLsnatVserverClientIp and
etsysLsnatVserverClientPrefixLen when creating the
LSNAT entry will result in the row not being created. There
are no other writable leaves so a successful createAndGo will
always transition a new entry to the active(1) state.
destroy(6)
- This will remove the etsysLsnatClientAccessEntry from the
etsysLsnatVserverClientTable and make it unavailable
for LSNAT operations."
::= { etsysLsnatVserverClientEntry 4 }
-- -------------------------------------------------------------
-- LSNAT Binding Table
-- -------------------------------------------------------------
etsysLsnatBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries defining active LSNAT bindings."
::={ etsysLsnatTables 7 }
etsysLsnatBindingEntry OBJECT-TYPE
SYNTAX EtsysLsnatBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatBindingTable defining an active
LSNAT binding. The etsysLsnatBindingEntry defines the runtime
characteristics of an LSNAT binding."
INDEX { etsysLsnatBindingId }
::= { etsysLsnatBindingTable 1 }
EtsysLsnatBindingEntry ::=
SEQUENCE {
etsysLsnatBindingId
Unsigned32,
etsysLsnatBindingState
INTEGER,
etsysLsnatBindingAddressType
InetAddressType,
etsysLsnatBindingForwardSrcIp
InetAddress,
etsysLsnatBindingForwardSrcPort
InetPortNumber,
etsysLsnatBindingForwardDstIp
InetAddress,
etsysLsnatBindingForwardDstPort
InetPortNumber,
etsysLsnatBindingReverseSrcIp
InetAddress,
etsysLsnatBindingReverseSrcPort
InetPortNumber,
etsysLsnatBindingReverseDstIp
InetAddress,
etsysLsnatBindingReverseDstPort
InetPortNumber,
etsysLsnatBindingProtocol
INTEGER,
etsysLsnatBindingAlgType
INTEGER,
etsysLsnatBindingFtpDataBindingCount
Unsigned32,
etsysLsnatBindingSticky
INTEGER,
etsysLsnatBindingHWConns
Gauge32,
etsysLsnatBindingVserverName
SnmpAdminString,
etsysLsnatBindingServerfarmName
SnmpAdminString,
etsysLsnatBindingRealIp
InetAddress,
etsysLsnatBindingRealPort
InetPortNumber,
etsysLsnatBindingCreationDate
DateAndTime,
etsysLsnatBindingExpirationDate
DateAndTime,
etsysLsnatBindingIdleTime
Unsigned32,
etsysLsnatBindingExpireTime
Unsigned32,
etsysLsnatBindingClear
TruthValue
}
etsysLsnatBindingId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value is a unique LSNAT binding identifier assigned by
LSNAT during binding creation."
::= { etsysLsnatBindingEntry 1 }
etsysLsnatBindingState OBJECT-TYPE
SYNTAX INTEGER {
init(1),
syncing(2),
established(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the state of the binding.
- `init', indicates this binding is initializing.
- `syncing', indicates this binding is syncing.
- `established', indicates this binding is established."
::= { etsysLsnatBindingEntry 2 }
etsysLsnatBindingAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this property affects the size and format of:
etsysLsnatBindingForwardSrcIp, etsysLsnatBindingForwardDstIp,
etsysLsnatBindingReverseSrcIp, etsysLsnatBindingReverseDstIp
and etsysLsnatBindingRealIp objects."
::= { etsysLsnatBindingEntry 3 }
etsysLsnatBindingForwardSrcIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forward source IP address for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 4 }
etsysLsnatBindingForwardSrcPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forward source port for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 5 }
etsysLsnatBindingForwardDstIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forward destination IP address for this LSNAT binding
entry."
::= { etsysLsnatBindingEntry 6 }
etsysLsnatBindingForwardDstPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forward destination port for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 7 }
etsysLsnatBindingReverseSrcIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reverse source IP address for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 8 }
etsysLsnatBindingReverseSrcPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reverse source port for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 9 }
etsysLsnatBindingReverseDstIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reverse destination IP address for this LSNAT binding
entry."
::= { etsysLsnatBindingEntry 10 }
etsysLsnatBindingReverseDstPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reverse destination port for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 11 }
etsysLsnatBindingProtocol OBJECT-TYPE
SYNTAX INTEGER {
tcp(1),
udp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Binding protocol type.
- `tcp', indicates that the binding is TCP protocol.
- `udp', indicates that the binding is UDP protocol."
::= { etsysLsnatBindingEntry 12 }
etsysLsnatBindingAlgType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ftpctrl(2),
ftpdata(3),
tftpctrl(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ALG Binding type.
- `none', indicates that this binding is not an ALG binding.
- `ftpctrl', indicates that this binding is a FTP control
binding.
- `ftpdata', indicates that this binding is a FTP data binding.
- `tftpctrl', indicates that this binding is a TFTP control
binding."
::= { etsysLsnatBindingEntry 13 }
etsysLsnatBindingFtpDataBindingCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of associated FTP data channel
bindings. This value is only significant if the
etsysLsnatBindingAlgType is ftpctrl(2)."
::= { etsysLsnatBindingEntry 14 }
etsysLsnatBindingSticky OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies if this binding is associated with a
sticky entry.
- `no', indicates that this binding is not associated with a
sticky entry.
- `yes', indicates that this binding is associated with a
sticky entry."
::= { etsysLsnatBindingEntry 15 }
etsysLsnatBindingHWConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of hardware connections
currently active on this LSNAT binding."
::= { etsysLsnatBindingEntry 16 }
etsysLsnatBindingVserverName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the LSNAT Virtual server
(etsysLsnatVserverName) associated with this LSNAT binding."
::= { etsysLsnatBindingEntry 17 }
etsysLsnatBindingServerfarmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the LSNAT Server farm
(etsysLsnatServerfarmName) associated with this LSNAT binding."
::= { etsysLsnatBindingEntry 18 }
etsysLsnatBindingRealIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Real IP address for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 19 }
etsysLsnatBindingRealPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Real server port for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 20 }
etsysLsnatBindingCreationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The creation date / time for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 21 }
etsysLsnatBindingExpirationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration date / time for this LSNAT binding entry."
::= { etsysLsnatBindingEntry 22 }
etsysLsnatBindingIdleTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The consecutive number of seconds this LSNAT binding entry
has been idle."
::= { etsysLsnatBindingEntry 23 }
etsysLsnatBindingExpireTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of idle seconds left before this LSNAT binding
entry will age out."
::= { etsysLsnatBindingEntry 24 }
etsysLsnatBindingClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to a value of true(1) will cause this
etsysLsnatBindingEntry to be deleted from the
etsysLsnatBindingTable.
Setting this object to a value of false(2) has no effect.
This object will always return a value of false(2)."
DEFVAL { false }
::= { etsysLsnatBindingEntry 25 }
-- -------------------------------------------------------------
-- LSNAT Sticky Entries Table
-- -------------------------------------------------------------
etsysLsnatStickyTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysLsnatStickyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries defining active LSNAT sticky entries."
::={ etsysLsnatTables 8 }
etsysLsnatStickyEntry OBJECT-TYPE
SYNTAX EtsysLsnatStickyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the etsysLsnatStickyTable defining an active
LSNAT sticky entry. The etsysLsnatStickyEntry defines the
runtime characteristics of an LSNAT sticky entry."
INDEX { etsysLsnatStickyId }
::= { etsysLsnatStickyTable 1 }
EtsysLsnatStickyEntry ::=
SEQUENCE {
etsysLsnatStickyId
Unsigned32,
etsysLsnatStickyType
INTEGER,
etsysLsnatStickyAddressType
InetAddressType,
etsysLsnatStickySrcIp
InetAddress,
etsysLsnatStickyDstIp
InetAddress,
etsysLsnatStickyDstPort
InetPortNumber,
etsysLsnatStickyHits
Counter32,
etsysLsnatStickyBindings
Counter32,
etsysLsnatStickyVserverName
SnmpAdminString,
etsysLsnatStickyServerfarmName
SnmpAdminString,
etsysLsnatStickyRealIp
InetAddress,
etsysLsnatStickyRealPort
InetPortNumber,
etsysLsnatStickyCreationDate
DateAndTime,
etsysLsnatStickyExpirationDate
DateAndTime,
etsysLsnatStickyIdleTime
Unsigned32,
etsysLsnatStickyExpireTime
Unsigned32,
etsysLsnatStickyClear
TruthValue
}
etsysLsnatStickyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value is a unique LSNAT sticky entry identifier assigned
by LSNAT during sticky entry creation."
::= { etsysLsnatStickyEntry 1 }
etsysLsnatStickyType OBJECT-TYPE
SYNTAX INTEGER {
sip(1),
sipDipDport(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the state of the binding.
- `sip', indicates that this sticky entry is based on the
source IP.
- `sipDipDport', indicates that this sticky entry is based
on the source IP, the destination IP and the destination
port."
::= { etsysLsnatStickyEntry 2 }
etsysLsnatStickyAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this property affects the size and format of:
etsysLsnatStickySrcIp, etsysLsnatStickyDstIp and
etsysLsnatStickyRealIp objects."
::= { etsysLsnatStickyEntry 3 }
etsysLsnatStickySrcIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 4 }
etsysLsnatStickyDstIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 5 }
etsysLsnatStickyDstPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination port for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 6 }
etsysLsnatStickyHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of hits this LSNAT
sticky entry has received."
::= { etsysLsnatStickyEntry 7 }
etsysLsnatStickyBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of active bindings
associated with this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 8 }
etsysLsnatStickyVserverName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the LSNAT Virtual server
(etsysLsnatVserverName) associated with this LSNAT sticky
entry."
::= { etsysLsnatStickyEntry 9 }
etsysLsnatStickyServerfarmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the LSNAT Server farm
(etsysLsnatServerfarmName) associated with this LSNAT sticky
entry."
::= { etsysLsnatStickyEntry 10 }
etsysLsnatStickyRealIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Real server IP address for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 11 }
etsysLsnatStickyRealPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Real server port for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 12 }
etsysLsnatStickyCreationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The creation date / time for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 13 }
etsysLsnatStickyExpirationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration date / time for this LSNAT sticky entry."
::= { etsysLsnatStickyEntry 14 }
etsysLsnatStickyIdleTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The consecutive number of seconds this LSNAT sticky entry
has been idle."
::= { etsysLsnatStickyEntry 15 }
etsysLsnatStickyExpireTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of idle seconds left before this LSNAT sticky
entry will age out."
::= { etsysLsnatStickyEntry 16 }
etsysLsnatStickyClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to a value of true(1) will cause this
etsysLsnatStickyEntry to be deleted from the
etsysLsnatStickyTable.
Setting this object to a value of false(2) has no effect.
This object will always return a value of false(2)."
DEFVAL { false }
::= { etsysLsnatStickyEntry 17 }
-- ------------------------------------
-- Conformance information
-- ------------------------------------
etsysLsnatMIBGroups
OBJECT IDENTIFIER ::= { etsysLsnatConformance 1 }
etsysLsnatMIBCompliances
OBJECT IDENTIFIER ::= { etsysLsnatConformance 2 }
-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------
etsysLsnatMIBGlobalStatsGroup OBJECT-GROUP
OBJECTS {
etsysLsnatStatsRealsUsed,
etsysLsnatStatsServerfarmsUsed,
etsysLsnatStatsVserversUsed,
etsysLsnatStatsVserversIPsUsed,
etsysLsnatStatsBindingsCurrent,
etsysLsnatStatsBindingsHigh,
etsysLsnatStatsBindingsDeleted,
etsysLsnatStatsBindingsTotal,
etsysLsnatStatsBindingsExhausted,
etsysLsnatStatsBindingsNoReals,
etsysLsnatStatsBindingsNoPortmapPort,
etsysLsnatStatsBindingsNoFtpALG,
etsysLsnatStatsBindingsPerSecond,
etsysLsnatStatsVserverActive,
etsysLsnatStatsVserverHigh,
etsysLsnatStatsServerfarmActive,
etsysLsnatStatsServerfarmHigh,
etsysLsnatStatsRealActive,
etsysLsnatStatsRealHigh,
etsysLsnatStatsStickyEntriesTotal,
etsysLsnatStatsStickyBindingsStuckTotal,
etsysLsnatStatsStickyBindingsStuckCurrent,
etsysLsnatStatsStickyActiveEntries,
etsysLsnatStatsStickyActiveEntriesHigh,
etsysLsnatStatsStickyEntriesExhausted,
etsysLsnatStatsClear,
etsysLsnatStatsClearDateAndTime
}
STATUS current
DESCRIPTION
"The statistics group for LSNAT global statistical
and configuration information."
::= { etsysLsnatMIBGroups 1 }
etsysLsnatMIBGlobalIpv4ConfigGroup OBJECT-GROUP
OBJECTS {
etsysLsnatIpv4ConfigFTPCtrlPort,
etsysLsnatIpv4ConfigTFTPCtrlPort,
etsysLsnatIpv4ConfigRealServerAccess,
etsysLsnatIpv4ConfigFinRstTimeout,
etsysLsnatIpv4ConfigFinRstTimeoutHalfClosedStatus
}
STATUS current
DESCRIPTION
"The information group for LSNAT global IPv4 configuration."
::= { etsysLsnatMIBGroups 2 }
etsysLsnatMIBRealServerAccessClientTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatRealServerAccessClientRowStatus
}
STATUS current
DESCRIPTION
"The Real Server Access Client group for LSNAT
Real Server Access Client configurations."
::= { etsysLsnatMIBGroups 3 }
etsysLsnatMIBServerfarmTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatServerfarmPredictor,
etsysLsnatServerfarmAdminStatus,
etsysLsnatServerfarmOperStatus,
etsysLsnatServerfarmConns,
etsysLsnatServerfarmHits,
etsysLsnatServerfarmStateChanges,
etsysLsnatServerfarmLastStateChangeDateAndTime,
etsysLsnatServerfarmRealsCfg,
etsysLsnatServerfarmRealsUp,
etsysLsnatServerfarmVserversCfg,
etsysLsnatServerfarmRowStatus
}
STATUS current
DESCRIPTION
"The Server Farm group for LSNAT Server farm configuration
and state operations."
::= { etsysLsnatMIBGroups 4 }
etsysLsnatMIBRealServerTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatRealServerWeight,
etsysLsnatRealServerMaxConns,
etsysLsnatRealServerFailDetectType,
etsysLsnatRealServerFailDetectProbeOne,
etsysLsnatRealServerFailDetectProbeTwo,
etsysLsnatRealServerAdminStatus,
etsysLsnatRealServerOperStatus,
etsysLsnatRealServerConns,
etsysLsnatRealServerHits,
etsysLsnatRealServerStateChanges,
etsysLsnatRealServerLastStateChangeDateAndTime,
etsysLsnatRealServerRowStatus
}
STATUS current
DESCRIPTION
"The Real server group for LSNAT Real server configuration and
state operations."
::= { etsysLsnatMIBGroups 5 }
etsysLsnatMIBVserverTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatVserverServerfarmName,
etsysLsnatVserverIdleTimeout,
etsysLsnatVserverStickyType,
etsysLsnatVserverStickyTimeout,
etsysLsnatVserverUDPOneShot,
etsysLsnatVserverVrrpInterface,
etsysLsnatVserverVrrpVrid,
etsysLsnatVserverSourceNatPoolName,
etsysLsnatVserverAdminStatus,
etsysLsnatVserverOperStatus,
etsysLsnatVserverLastStateChangeReason,
etsysLsnatVserverLastStateChangeDateAndTime,
etsysLsnatVserverConns,
etsysLsnatVserverHits,
etsysLsnatVserverStateChanges,
etsysLsnatVserverVirtualAddressStatus,
etsysLsnatVserverClientCount,
etsysLsnatVserverRowStatus,
etsysLsnatVserverBindingMatchSourcePort
}
STATUS current
DESCRIPTION
"The Virtual server group for LSNAT Virtual server
configuration and state operations."
::= { etsysLsnatMIBGroups 6 }
etsysLsnatMIBVserverVirtualAddressTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatVserverVirtualAddressRowStatus
}
STATUS current
DESCRIPTION
"The Virtual server Virtual group for LSNAT Virtual
configurations."
::= { etsysLsnatMIBGroups 7 }
etsysLsnatMIBVserverClientTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatVserverClientRowStatus
}
STATUS current
DESCRIPTION
"The Virtual server Client Access group for LSNAT Client
Access configurations."
::= { etsysLsnatMIBGroups 8 }
etsysLsnatMIBBindingTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatBindingState,
etsysLsnatBindingAddressType,
etsysLsnatBindingForwardSrcIp,
etsysLsnatBindingForwardSrcPort,
etsysLsnatBindingForwardDstIp,
etsysLsnatBindingForwardDstPort,
etsysLsnatBindingReverseSrcIp,
etsysLsnatBindingReverseSrcPort,
etsysLsnatBindingReverseDstIp,
etsysLsnatBindingReverseDstPort,
etsysLsnatBindingProtocol,
etsysLsnatBindingAlgType,
etsysLsnatBindingFtpDataBindingCount,
etsysLsnatBindingSticky,
etsysLsnatBindingHWConns,
etsysLsnatBindingVserverName,
etsysLsnatBindingServerfarmName,
etsysLsnatBindingRealIp,
etsysLsnatBindingRealPort,
etsysLsnatBindingCreationDate,
etsysLsnatBindingExpirationDate,
etsysLsnatBindingIdleTime,
etsysLsnatBindingExpireTime,
etsysLsnatBindingClear
}
STATUS current
DESCRIPTION
"The Bindings group for LSNAT Binding information."
::= { etsysLsnatMIBGroups 9 }
etsysLsnatMIBStickyTableGroup OBJECT-GROUP
OBJECTS {
etsysLsnatStickyType,
etsysLsnatStickyAddressType,
etsysLsnatStickySrcIp,
etsysLsnatStickyDstIp,
etsysLsnatStickyDstPort,
etsysLsnatStickyHits,
etsysLsnatStickyBindings,
etsysLsnatStickyVserverName,
etsysLsnatStickyServerfarmName,
etsysLsnatStickyRealIp,
etsysLsnatStickyRealPort,
etsysLsnatStickyCreationDate,
etsysLsnatStickyExpirationDate,
etsysLsnatStickyIdleTime,
etsysLsnatStickyExpireTime,
etsysLsnatStickyClear
}
STATUS current
DESCRIPTION
"The Sticky entry group for LSNAT Sticky entry information."
::= { etsysLsnatMIBGroups 10 }
-- ------------------------------------
-- Compliance statements
-- ------------------------------------
etsysLsnatMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for implementation of the Router
Application Services LSNAT functionality."
MODULE
MANDATORY-GROUPS {
etsysLsnatMIBGlobalStatsGroup,
etsysLsnatMIBGlobalIpv4ConfigGroup,
etsysLsnatMIBRealServerAccessClientTableGroup,
etsysLsnatMIBServerfarmTableGroup,
etsysLsnatMIBRealServerTableGroup,
etsysLsnatMIBVserverTableGroup,
etsysLsnatMIBVserverVirtualAddressTableGroup,
etsysLsnatMIBVserverClientTableGroup,
etsysLsnatMIBBindingTableGroup,
etsysLsnatMIBStickyTableGroup
}
OBJECT etsysLsnatStatsClear
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT etsysLsnatRealServerAccessClientRowStatus
-- SYNTAX RowStatus {
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only active, createAndGo and destroy are allowed."
OBJECT etsysLsnatServerfarmRowStatus
-- SYNTAX RowStatus {
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only active, createAndGo and destroy are allowed."
OBJECT etsysLsnatRealServerRowStatus
-- SYNTAX RowStatus {
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only active, createAndGo and destroy are allowed."
OBJECT etsysLsnatVserverRowStatus
-- SYNTAX RowStatus {
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only active, createAndGo and destroy are allowed."
OBJECT etsysLsnatVserverVirtualAddressRowStatus
-- SYNTAX RowStatus {
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only active, createAndGo and destroy are allowed."
OBJECT etsysLsnatVserverClientRowStatus
-- SYNTAX RowStatus {
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only active, createAndGo and destroy are allowed."
OBJECT etsysLsnatBindingAddressType
-- SYNTAX InetAddressType {
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
DESCRIPTION
"Only IPv4 and IPv6 addresses are allowed."
OBJECT etsysLsnatStickyAddressType
-- SYNTAX InetAddressType {
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
DESCRIPTION
"Only IPv4 and IPv6 addresses are allowed."
::= { etsysLsnatMIBCompliances 1 }
END
View Git Blame Copy Permalink