5351 lines
191 KiB
Plaintext
5351 lines
191 KiB
Plaintext
ENTERASYS-CLASS-OF-SERVICE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- enterasys-cos-mib.txt
|
|
--
|
|
-- Part Number:
|
|
--
|
|
--
|
|
|
|
-- This module provides authoritative definitions for Extreme
|
|
-- Networks' user class of service functionality.
|
|
|
|
--
|
|
-- This module will be extended, as needed.
|
|
|
|
-- Extreme Networks reserves the right to make changes in this
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Extreme Networks
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Extreme Networks be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Extreme
|
|
-- Networks has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Extreme Networks grants vendors, end-users, and other interested
|
|
-- parties a non-exclusive license to use this Specification in
|
|
-- connection with the management of Extreme Networks products.
|
|
|
|
-- Copyright 2004-2014 Extreme Networks, Inc.
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32,
|
|
Counter64, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TEXTUAL-CONVENTION, TruthValue, TimeStamp
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
ifName
|
|
FROM IF-MIB
|
|
PortList
|
|
FROM Q-BRIDGE-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
dot1dBasePort
|
|
FROM BRIDGE-MIB
|
|
etsysModules
|
|
FROM ENTERASYS-MIB-NAMES
|
|
etsysPolicyRuleType, etsysPolicyRuleData, etsysPolicyRulePrefixBits,
|
|
etsysPolicyRulePortType, etsysPolicyRulePort
|
|
FROM ENTERASYS-POLICY-PROFILE-MIB;
|
|
|
|
|
|
etsysCosMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201412041643Z" -- Thu Dec 04 16:43 UTC 2014
|
|
ORGANIZATION "Extreme Networks, Inc."
|
|
CONTACT-INFO
|
|
"Postal: Extreme Networks, Inc.
|
|
145 Rio Robles
|
|
San Jose, CA 95134 USA
|
|
|
|
Phone: +1 408 579-2800
|
|
E-mail: support@extremenetworks.com
|
|
WWW: http://www.extremenetworks.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB module defines a portion of the SNMP enterprise
|
|
MIBs under the Enterasys enterprise OID pertaining to the
|
|
configuration and application of transmission and reception
|
|
attributes that comprise class of service for Extreme
|
|
network edge devices or access products."
|
|
|
|
REVISION "201412041643Z" -- Thu Dec 04 16:43 UTC 2014
|
|
DESCRIPTION
|
|
"Updated etsysCosTxqPortGroupName, etsysCosIrlPortGroupName,
|
|
etsysCosOrlPortGroupName, etsysCosFloodCtrlPortGroupName,
|
|
etsysCosUserIrlrsPortGroupName, and
|
|
etsysCosUserOrlrsPortGroupName octet string size to 32
|
|
characters."
|
|
|
|
REVISION "201411251431Z" -- Tue Nov 25 14:31 UTC 2014
|
|
DESCRIPTION
|
|
"Updated two DESCRIPTION clauses."
|
|
|
|
REVISION "201410131755Z" -- Mon Oct 13 17:55 UTC 2014
|
|
DESCRIPTION
|
|
"Addition of the etsysCosTxqPortQMinRate leaf to the
|
|
etsysCosTxqResourceTable table and the weightedRoundRobin
|
|
and weightedDeficitRR TxqArbiterModes.
|
|
|
|
Updated the CONTACT-INFO clause."
|
|
|
|
REVISION "201109221548Z" -- Thu Sep 22 15:48 UTC 2011
|
|
DESCRIPTION
|
|
"Addition of per inbound and outbound user rate limiter/rate shaper
|
|
tables. These tables allow for the configuration of rate
|
|
limiters and rate shapers at the user level."
|
|
|
|
REVISION "201011221823Z" -- Mon Nov 22 18:23 UTC 2010
|
|
DESCRIPTION
|
|
"Changed the descriptions in etsysCosTxqPortEnhancedTransGroupId and
|
|
etsysCosTxqPortSliceSetting. Setting etsysCosTxqPortEnhancedTransGroupId
|
|
will no longer clear the settings etsysCosTxqPortSliceSetting, instead
|
|
it will supersede the values."
|
|
|
|
REVISION "201009201412Z" -- Mon Sep 20 14:12 UTC 2010
|
|
DESCRIPTION
|
|
"Added Enhanced Transmission Group and priority mappings to
|
|
DCB Enhanced Transmission Traffic Classes"
|
|
|
|
REVISION "201007281210Z" -- Wed Jul 28 12:10 UTC 2010
|
|
DESCRIPTION
|
|
"Added support for Enhanced Transmission."
|
|
|
|
REVISION "200802131503Z" -- Wed Feb 13 15:03 UTC 2008
|
|
DESCRIPTION
|
|
"Further constrained size of etsysCosTosValue OCTET STRING."
|
|
|
|
REVISION "200705240229Z" -- Thu May 24 2:29 UTC 2007
|
|
DESCRIPTION
|
|
"Add support for inbound unicast, multicast and broadcast packet
|
|
flooding limits."
|
|
|
|
REVISION "200504132122Z" -- Wed Apr 13 21:22 GMT 2005
|
|
DESCRIPTION
|
|
"Additional branch etsysCosNotifications properly contains
|
|
trap information."
|
|
|
|
REVISION "200411221628Z" -- Mon Nov 22 16:28 GMT 2004
|
|
DESCRIPTION
|
|
"Corrected the bits in the EtsysCosRlCapabilities textual
|
|
convention."
|
|
|
|
REVISION "200411091552Z" -- Tue Nov 9 15:52 GMT 2004
|
|
DESCRIPTION
|
|
"The initial version of this MIB module."
|
|
::= { etsysModules 55 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
TxqArbiterModes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention enumerates the possible arbiter
|
|
modes.
|
|
|
|
strict(0) Queues are serviced until empty or
|
|
until a higher priority queue requires
|
|
servicing.
|
|
weightedFairQ(1) Weighted Fair Queuing. Queues are
|
|
serviced according to weight.
|
|
lowLatencyQ(2) Some queues may be strict, while other
|
|
are weighted-fair.
|
|
enhancedTransmission(3) Non-Enhanced Transmission Selection queues are
|
|
serviced using a low latency or strict arbiter.
|
|
Any available bandwidth is then split
|
|
using Weighted Fair Queuing among
|
|
the Enhanced Transmission Selection
|
|
Queues.
|
|
weightedRoundRobin(4) Weighted Round Robin. Queues are serviced
|
|
round robin according to weight.
|
|
weightedDeficitRR(5) Weighted Deficit Round Robin. Serves each non-empty queue
|
|
whose deficit counter is greater than the size of the
|
|
packet at the head of the queue. If the deficit
|
|
counter is lower, the queue is skipped and the deficit
|
|
counter is increased by a given quantum."
|
|
|
|
SYNTAX BITS {
|
|
strict(0),
|
|
weightedFairQ(1),
|
|
lowLatencyQ(2),
|
|
enhancedTransmission(3),
|
|
weightedRoundRobin(4),
|
|
weightedDeficitRR(5)
|
|
}
|
|
|
|
|
|
TxqAlgorithms ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention enumerates the possible queuing
|
|
algorithms.
|
|
|
|
tailDrop(0) The last entry in the queue is discarded
|
|
in favor of new entries.
|
|
headDrop(1) The first entry in the queue is discarded
|
|
in favor of new entries.
|
|
red(2) Random Early Discard.
|
|
wred(3) Weighted Random Early Discard."
|
|
SYNTAX BITS {
|
|
tailDrop(0),
|
|
headDrop(1),
|
|
red(2),
|
|
wred(3)
|
|
}
|
|
|
|
|
|
TxQueueList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
transmit queues, with the first octet specifying queues 0
|
|
through 7, the second octet specifying queues 8 through 15,
|
|
et cetera. Within each octet, the most significant bit
|
|
represents the lowest numbered queue, and the least significant
|
|
bit represents the highest numbered queue. Thus, each queue
|
|
of the port is represented by a single bit within the value of
|
|
this object. If that bit has a value of '1' then that queue
|
|
is included in the set of queues; the queue is not included if
|
|
its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
|
|
EtsysCosRateTypes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention enumerates the possible inbound or
|
|
outbound rate types.
|
|
|
|
percentage(0) A percentage of the total bandwidth
|
|
available.
|
|
pps(1) Packet per second.
|
|
kbps(2) Kilobits per second.
|
|
mbps(3) Megabits per second.
|
|
gbps(4) Gigabits per second.
|
|
tbps(5) Terabits per second."
|
|
SYNTAX BITS {
|
|
percentage(0),
|
|
pps(1),
|
|
kbps(2),
|
|
mbps(3),
|
|
gbps(4),
|
|
tbps(5)
|
|
}
|
|
|
|
|
|
EtsysCosRlCapabilities ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the supported actions for
|
|
inbound or outbound rate limiting.
|
|
|
|
drop(0) Packets will be dropped.
|
|
reprioritize(1) Packet priority change.
|
|
count(2) Count the either packets or bits through the
|
|
limiter (specified by the configured
|
|
EtsysCosRateTypes, percentage(1) not
|
|
chainingAnd(3) Link limiters together, violated if ALL
|
|
limiters of like EtsysRateLimitingType are
|
|
violated, this is the default type of chained
|
|
limiters.
|
|
chainingOr(4) Link limiters together, violated if ANY
|
|
limiters of like EtsysRateLimitingType are
|
|
violated.
|
|
syslog(5) Syslog on first violation is supported.
|
|
trap(6) SNMP Notify on first violation is supported.
|
|
disable(7) Disable ingress port on first violation is
|
|
supported."
|
|
SYNTAX BITS {
|
|
drop(0),
|
|
reprioritize(1),
|
|
count(2),
|
|
chainingAnd(3),
|
|
chainingOr(4),
|
|
syslog(5),
|
|
trap(6),
|
|
disable(7)
|
|
}
|
|
|
|
EtsysCosUserModeCapabilities ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the capabilities the user
|
|
rate limiter/ rate shaper can be configured to.
|
|
|
|
rateLimiting(0) Supports per user rate limiting.
|
|
rateShaping(1) Supports per user rate shaping."
|
|
|
|
SYNTAX BITS {
|
|
rateLimiting(0),
|
|
rateShaping(1)
|
|
}
|
|
|
|
EtsysCosRlModes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the operational mode the user rate
|
|
limiter/rate shaper has been configured to.
|
|
|
|
rateLimiting(0) Rate limit user traffic
|
|
rateShaping(1) Rate shape user traffic."
|
|
|
|
SYNTAX INTEGER {
|
|
rateLimiting(0),
|
|
rateShaping(1)
|
|
}
|
|
|
|
|
|
EtsysViolationAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the available actions
|
|
to be taken when a RateLimiter is violated for the
|
|
first time (on a transition from 0 to 1 of a bit in the
|
|
etsysCosIrlResourceViolationPortList).
|
|
|
|
syslog(0) System logging messages will be sent to the console
|
|
trap(1) A trap will be sent.
|
|
disable(2) The dot1dBasePort on which the event occurred will
|
|
be operationally disabled."
|
|
SYNTAX BITS {
|
|
syslog(0),
|
|
trap(1),
|
|
disable(2)
|
|
}
|
|
|
|
|
|
EtsysRateLimitingType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the range of characteristics
|
|
that can applied to inbound or outbound rate limiters. For
|
|
chains of limiters, the behavior with respect to limiters of
|
|
like type (drop or reprioritize) may be controlled via the
|
|
xxxOR nomenclature. By default ALL limiters of like type must
|
|
be violated for the action (drop or reprioritize) to apply
|
|
(implicit AND). The xxxOR types indicate that the action
|
|
(drop or reprioritize) will be applied if ANY of the limiters
|
|
is violated. The count option counts packets or bits presented
|
|
to the limiter."
|
|
SYNTAX INTEGER {
|
|
drop(0),
|
|
dropOR(1),
|
|
rePrioritize(2),
|
|
rePrioritizeOR(3),
|
|
count(4)
|
|
}
|
|
|
|
|
|
EtsysRateLimitResetBits ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the reset properties for the
|
|
statistics gathering portion of the rate limiters. If bit 0
|
|
is set, the etsysCosIrlViolation TruthValue will be reset to
|
|
false. If bit 1 is set, the etsysCosIrlUnitCounter will be
|
|
reset to zero."
|
|
SYNTAX BITS {
|
|
clearViolation(0),
|
|
clearUnitCounter(1)
|
|
}
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB Objects
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosObjects OBJECT IDENTIFIER ::= { etsysCosMIB 1 }
|
|
|
|
etsysCosNotifications OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 0 }
|
|
|
|
etsysCosMasterReset OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 1 }
|
|
|
|
etsysCosCapabilities OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 2 }
|
|
|
|
etsysCos OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 3 }
|
|
|
|
etsysCosTxq OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 4 }
|
|
|
|
etsysCosIrl OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 5 }
|
|
|
|
etsysCosOrl OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 6 }
|
|
|
|
etsysCosFloodControl OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 7 }
|
|
|
|
etsysCosUserIrlrs OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 8 }
|
|
|
|
etsysCosUserOrlrs OBJECT IDENTIFIER
|
|
::= { etsysCosObjects 9 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosMasterReset Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosMibObjectAnullingBehavior OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object SHALL always read false. Setting this object to
|
|
true MUST remove all existing entries from all tables in all
|
|
subordinate objects of etsysCosObjects, and nullify all
|
|
changes to any values. The resulting behavior should yield
|
|
an unconfigured etsysCosMIB."
|
|
DEFVAL { false }
|
|
::= { etsysCosMasterReset 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosCapabilities Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosCapability OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
supports8021Dpriority(0),
|
|
-- user priority to traffic class mapping support
|
|
supportsTosOverwrite(1),
|
|
-- Type of Service / Differentiated Service
|
|
-- Code Point re-assignment support
|
|
supportsTosMasking(2),
|
|
-- The relevant bits used in determining
|
|
-- the TOS-overwrite data
|
|
supportsTransmitQueue(3),
|
|
-- Transmit Bandwidth provisioning, weighted fair
|
|
-- queuing, RED, WRED, head/tail drop support
|
|
supportsInboundRateLimiting(4),
|
|
-- drop, reprioritize, notify, chaining
|
|
-- for inbound traffic support
|
|
supportsOutBoundRateLimiting(5),
|
|
-- drop, reprioritize, notify, chaining
|
|
-- for outbound traffic support
|
|
supportsDropPrecedence(6),
|
|
supportsUnknownUnicastRateLimiting(7),
|
|
-- drop, notify, port disable for inbound
|
|
-- unknown unicast traffic support
|
|
supportsMulticastRateLimiting(8),
|
|
-- drop, notify, port disable for inbound
|
|
-- multicast traffic support
|
|
supportsBroadcastRateLimiting(9),
|
|
-- drop, notify, port disable for inbound
|
|
-- broadcast traffic support
|
|
supportsTransmitQueuePortShaping(10),
|
|
-- bandwidth shaping for outbound traffic
|
|
supportUserInboundRateLimitingRateShaping(11),
|
|
-- Per user support for inbound rate limiting /
|
|
-- rate shapping
|
|
supportUserOutboundRateLimitingRateShaping(12)
|
|
-- Per user support for outbound rate limiting /
|
|
-- rate shapping
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of capabilities related to class of service support.
|
|
A set bit, with the value 1, indicates support for the
|
|
described functionality. A clear bit, with the value
|
|
0, indicates the described functionality is not supported."
|
|
::= { etsysCosCapabilities 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
-- etsysCos Group
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries allowed in the etsysCosTable."
|
|
::= { etsysCos 1 }
|
|
|
|
etsysCosNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the etsysCosTable."
|
|
::= { etsysCos 2 }
|
|
|
|
etsysCosLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCos Table was last modified."
|
|
::= { etsysCos 3 }
|
|
|
|
etsysCosEnableState OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled(1), controls configured for this MIB supersede
|
|
controls for portions of BRIDGE-MIB dealing with priority
|
|
queue mapping, all of the CTRON-RATE-POLICING-MIB and
|
|
all of the CTRON-TX-QUEUE-ARBITRATION-MIB. A setting to
|
|
disabled(2) from enabled(1), results in the restoration of
|
|
any existing configurations from the aforementioned MIBs."
|
|
DEFVAL { disabled }
|
|
::= { etsysCos 4 }
|
|
|
|
etsysCosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing class of service settings to be applied
|
|
to a dot1dBridge port or port groups."
|
|
::= { etsysCos 5 }
|
|
|
|
etsysCosEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosIndex }
|
|
::= { etsysCosTable 1 }
|
|
|
|
EtsysCosSettingsEntry ::=
|
|
SEQUENCE {
|
|
etsysCosIndex
|
|
Unsigned32,
|
|
etsysCosRowStatus
|
|
RowStatus,
|
|
etsysCos8021dPriority
|
|
Integer32,
|
|
etsysCosTosValue
|
|
OCTET STRING,
|
|
etsysCosTxqReference
|
|
Integer32,
|
|
etsysCosIrlReference
|
|
Integer32,
|
|
etsysCosOrlReference
|
|
Integer32,
|
|
etsysCosDropPrecedence
|
|
Integer32,
|
|
etsysCosFloodControlStatus
|
|
EnabledStatus,
|
|
etsysCosUserIrlrsReference
|
|
Integer32,
|
|
etsysCosUserOrlrsReference
|
|
Integer32
|
|
}
|
|
|
|
etsysCosIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique class of service identifier for this CoS setting.
|
|
For reasons of backward compatibility indexes 0-7 MUST exist
|
|
and be configured with a etsysCos8021dPriority which
|
|
matches the etsysCosIndex."
|
|
::= { etsysCosEntry 1 }
|
|
|
|
etsysCosRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosTable. Entries within
|
|
this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets."
|
|
::= { etsysCosEntry 2 }
|
|
|
|
etsysCos8021dPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1D priority to be associated with this Class of
|
|
Service. If this field is returned as (-1) then it has not
|
|
been configured and no action will be taken for this
|
|
attribute."
|
|
|
|
DEFVAL { -1 }
|
|
::= { etsysCosEntry 3 }
|
|
|
|
etsysCosTosValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..2))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of Service or Differentiated Services Code Point
|
|
value and mask to be associated with this Class of Service.
|
|
If this field is returned as <empty-string>, then it has not
|
|
been configured and no action will be taken for this
|
|
attribute. The first octet shall represent the TOS/DSCP value
|
|
and the second octet shall represent the mask applied to that
|
|
value. Agents that do not support masking shall fail sets to
|
|
this object that include a mask octet."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosEntry 4 }
|
|
|
|
etsysCosTxqReference OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit queue table instance to reference for
|
|
this Class of Service."
|
|
::= { etsysCosEntry 5 }
|
|
|
|
etsysCosIrlReference OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inbound rate limiting table instance to reference for
|
|
this Class of Service. If this instance is returned as
|
|
(-1), no action will be taken for this attribute."
|
|
::= { etsysCosEntry 6 }
|
|
|
|
etsysCosOrlReference OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outbound rate limiting table instance to reference for
|
|
this Class of Service. If this instance is returned as
|
|
(-1), no action will be taken for this attribute."
|
|
::= { etsysCosEntry 7 }
|
|
|
|
etsysCosDropPrecedence OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop precedence default action. If this field is returned
|
|
as (-1) then it has not been configured and no action will be
|
|
taken for this attribute. If unsupported the agent may
|
|
optionally implement this leaf as read-only."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosEntry 8 }
|
|
|
|
etsysCosFloodControlStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether flooded traffic will be rate limited based
|
|
on configuration in the etsysCosFloodControl groups."
|
|
DEFVAL { disabled }
|
|
::= { etsysCosEntry 9 }
|
|
|
|
etsysCosUserIrlrsReference OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inbound user rate limiter/rate shaper table instance to
|
|
reference for this Class of Service. If this instance is
|
|
returned as (-1), no action will be taken for this attribute."
|
|
::= { etsysCosEntry 10 }
|
|
|
|
etsysCosUserOrlrsReference OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outbound user rate limiter/rate shaper table instance to
|
|
reference for this Class of Service. If this instance is
|
|
returned as (-1), no action will be taken for this attribute."
|
|
::= { etsysCosEntry 11 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxq Tables
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- etsysCosTxqPortTypeTable
|
|
-- ---------------------------------------------------------------------
|
|
|
|
etsysCosTxqNumPortTypes OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual number of distinctly unique (as defined by
|
|
the set of shared Transmit Queue capabilities)
|
|
port types available for configuration on this agent."
|
|
::= { etsysCosTxq 1 }
|
|
|
|
etsysCosTxqPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table defining the distinctly unique transmit queue
|
|
characteristics of a group of ports."
|
|
::= { etsysCosTxq 2 }
|
|
|
|
etsysCosTxqPortTypeEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTxqPortTypeTable."
|
|
INDEX { etsysCosTxqPortTypeIndex }
|
|
::= { etsysCosTxqPortTypeTable 1 }
|
|
|
|
EtsysCosTxqPortTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTxqPortTypeIndex
|
|
Integer32,
|
|
etsysCosTxqPortTypeDescr
|
|
SnmpAdminString,
|
|
etsysCosTxqPortTypeEligiblePorts
|
|
PortList,
|
|
etsysCosTxqPortTypeUnselectedPorts
|
|
PortList,
|
|
etsysCosTxqPortTypeNumberOfQueues
|
|
Integer32,
|
|
etsysCosTxqPortTypeSupportedRateTypes
|
|
EtsysCosRateTypes,
|
|
etsysCosTxqPortTypeNumberOfSlices
|
|
Integer32,
|
|
etsysCosTxqPortTypeQueueAlgorithms
|
|
TxqAlgorithms,
|
|
etsysCosTxqPortTypeQueueArbiterModes
|
|
TxqArbiterModes,
|
|
etsysCosTxqPortTypeMaxDropPrecedence
|
|
Unsigned32,
|
|
etsysCosTxqPortTypeLLQEligibleQueues
|
|
TxQueueList
|
|
}
|
|
|
|
etsysCosTxqPortTypeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type associated with the unique set of ports sharing
|
|
these capabilities."
|
|
::= { etsysCosTxqPortTypeEntry 1 }
|
|
|
|
etsysCosTxqPortTypeDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual description that represents this set of dot1dBridge
|
|
ports."
|
|
::= { etsysCosTxqPortTypeEntry 2 }
|
|
|
|
etsysCosTxqPortTypeEligiblePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports belonging (having the same
|
|
capabilities) to this port type."
|
|
::= { etsysCosTxqPortTypeEntry 3 }
|
|
|
|
etsysCosTxqPortTypeUnselectedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports not yet bound to a user
|
|
created row (port group) in the etsysCosTxqPortGroupTable."
|
|
::= { etsysCosTxqPortTypeEntry 4 }
|
|
|
|
etsysCosTxqPortTypeNumberOfQueues OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of queues available for configuration by this
|
|
agent on this type of port."
|
|
::= { etsysCosTxqPortTypeEntry 5 }
|
|
|
|
etsysCosTxqPortTypeSupportedRateTypes OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate types available for use in these settings."
|
|
::= { etsysCosTxqPortTypeEntry 6 }
|
|
|
|
etsysCosTxqPortTypeNumberOfSlices OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of slices available for configuration."
|
|
::= { etsysCosTxqPortTypeEntry 7 }
|
|
|
|
etsysCosTxqPortTypeQueueAlgorithms OBJECT-TYPE
|
|
SYNTAX TxqAlgorithms
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queuing algorithms available for use with these settings."
|
|
::= { etsysCosTxqPortTypeEntry 8 }
|
|
|
|
etsysCosTxqPortTypeQueueArbiterModes OBJECT-TYPE
|
|
SYNTAX TxqArbiterModes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The arbitration modes available for use with these setting."
|
|
::= { etsysCosTxqPortTypeEntry 9 }
|
|
|
|
etsysCosTxqPortTypeMaxDropPrecedence OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum drop precedence allowed on this port type."
|
|
::= { etsysCosTxqPortTypeEntry 10 }
|
|
|
|
etsysCosTxqPortTypeLLQEligibleQueues OBJECT-TYPE
|
|
SYNTAX TxQueueList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queues eligible for low latency queue configuration."
|
|
::= { etsysCosTxqPortTypeEntry 11 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqUnitTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the rate type, minimum and maximum limits
|
|
of the port groups and their respective granularity."
|
|
::= { etsysCosTxq 3 }
|
|
|
|
etsysCosTxqUnitEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTxqUnitTable. Entries in this table indicate the port
|
|
group boundaries for the type of port specified."
|
|
INDEX { etsysCosTxqPortTypeIndex,
|
|
etsysCosTxqUnitTypeIndex }
|
|
::= { etsysCosTxqUnitTable 1 }
|
|
|
|
EtsysCosTxqUnitEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTxqUnitTypeIndex
|
|
EtsysCosRateTypes,
|
|
etsysCosTxqUnitMaxRate
|
|
Unsigned32,
|
|
etsysCosTxqUnitMinRate
|
|
Unsigned32,
|
|
etsysCosTxqUnitGranularity
|
|
Unsigned32
|
|
}
|
|
|
|
etsysCosTxqUnitTypeIndex OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit identifier for this port type. The metric at which
|
|
the etsysCosTxqUnitMinRate, etsysCosTxqUnitMaxRate and
|
|
etsysCosTxqUnitGranularity are applied."
|
|
::= { etsysCosTxqUnitEntry 1 }
|
|
|
|
etsysCosTxqUnitMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum rate supported at the rate of units specified by
|
|
etsysCosTxqUnitTypeIndex."
|
|
::= { etsysCosTxqUnitEntry 2 }
|
|
|
|
etsysCosTxqUnitMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate supported at the rate of units specified by
|
|
etsysCosTxqUnitTypeIndex."
|
|
::= { etsysCosTxqUnitEntry 3 }
|
|
|
|
etsysCosTxqUnitGranularity OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest unit by which a rate can be modified."
|
|
::= { etsysCosTxqUnitEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqPortGroupTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqMaxPortGroups OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of port groups supported by this agent."
|
|
::= { etsysCosTxq 4 }
|
|
|
|
etsysCosTxqNumPortGroups OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of assigned dot1dBridge port groups present in this
|
|
agent. This number also reflects the port groups with a
|
|
default system setup indicated by a zero(0) index."
|
|
::= { etsysCosTxq 5 }
|
|
|
|
etsysCosTxqPortGroupLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosTxqPortTable was last
|
|
modified."
|
|
::= { etsysCosTxq 6 }
|
|
|
|
etsysCosTxqPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysTxqPortCfgTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user settings for specific types of
|
|
ports and their matching transmit queue configurations."
|
|
::= { etsysCosTxq 7 }
|
|
|
|
etsysCosTxqPortGroupEntry OBJECT-TYPE
|
|
SYNTAX EtsysTxqPortCfgTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTxqPortTypeTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosTxqPortGroupIndex,
|
|
etsysCosTxqPortTypeIndex}
|
|
::= { etsysCosTxqPortGroupTable 1 }
|
|
|
|
EtsysTxqPortCfgTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTxqPortGroupIndex
|
|
Integer32,
|
|
etsysCosTxqPortGroupRowStatus
|
|
RowStatus,
|
|
etsysCosTxqPortGroupList
|
|
PortList,
|
|
etsysCosTxqPortGroupName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysCosTxqPortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user-specified port group for which the settings are
|
|
defined. This value MAY have meaning to the user for the
|
|
purposes of identifying groups of dot1dBridge ports with
|
|
similar function (uplink, user, etc).
|
|
|
|
A value of zero(0) has special meaning in that it identifies
|
|
the default port grouping of characteristics present in the
|
|
agent. Entries indexed by a zero have a max-access of
|
|
read-only. This value will have a system defined maximum of
|
|
etsysCosTxqMaxPortGroups."
|
|
::= { etsysCosTxqPortGroupEntry 1 }
|
|
|
|
etsysCosTxqPortGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosTxqPortTypeTable. Entries within
|
|
this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets.
|
|
|
|
When this object's value is active(1) the specified dot1dBridge
|
|
ports listed in the etsysCosTxqPortGroupList shall be removed
|
|
from etsysCosTxqPortGroupUnselectedPorts.
|
|
|
|
A row in transition to the active(1) state will have its
|
|
port group list validated before activation. A port list that
|
|
cannot be made active MUST result in the row state to become
|
|
notReady(3) and no configuration action will be taken for this
|
|
row. Rows not in the active(1) state SHALL NOT be persisted
|
|
across entity resets and MUST return the ports from its
|
|
port group list to the etsysCosTxqPortGroupUnselectedPorts.
|
|
|
|
When this object's value is set to destroy(6) from an active(1)
|
|
state, all ports contained in etsysCosTxqPortList shall be
|
|
returned to the etsysCosTxqPortGroupUnselectedPorts and all
|
|
entries referencing this row shall be removed as well."
|
|
::= { etsysCosTxqPortGroupEntry 2 }
|
|
|
|
etsysCosTxqPortGroupList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports to be assigned to this group.
|
|
Ports in this list MUST :
|
|
o Be mutually exclusive from other entries in this table
|
|
o Be comprised of the same port type as defined by the
|
|
etsysCosTxqPortTypeIndex."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosTxqPortGroupEntry 3 }
|
|
|
|
etsysCosTxqPortGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned textual description of this
|
|
port group."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosTxqPortGroupEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqPortCfgTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the queue values to be used in the
|
|
entries specified. Rows in this table are populated based
|
|
on rowCreation in the etsysCosTxqPortGroupTable. Changes to
|
|
this table are reflected in the etsysCosTxqPortGroupLastChange
|
|
value."
|
|
::= { etsysCosTxq 8 }
|
|
|
|
etsysCosTxqPortCfgEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTxqPortCfgTable. Details contained within this
|
|
entry will depict the slice distributions across each queue
|
|
per dot1dBridge port, as well as determine the arbiter's
|
|
method for servicing the queues. Entries within this table
|
|
MUST be considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosTxqPortGroupIndex,
|
|
etsysCosTxqPortTypeIndex }
|
|
::= { etsysCosTxqPortCfgTable 1 }
|
|
|
|
EtsysCosTxqPortCfgEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTxqPortArbMode
|
|
TxqArbiterModes,
|
|
etsysCosTxqPortSliceSetting
|
|
OCTET STRING,
|
|
etsysCosTxqPortEnhancedTransMaxGroups
|
|
Integer32,
|
|
etsysCosTxqPortEnhancedTransGroupId
|
|
OCTET STRING,
|
|
etsysCosTxqPortEnhancedTransBandwidth
|
|
OCTET STRING,
|
|
etsysCosTxqPortEnhancedTransGroupToDcbxTC
|
|
OCTET STRING,
|
|
etsysCosTxqPortEnhancedTransPriorityToDcbxTC
|
|
OCTET STRING
|
|
}
|
|
|
|
etsysCosTxqPortArbMode OBJECT-TYPE
|
|
SYNTAX TxqArbiterModes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode in which the transmit queue arbiter services the
|
|
queues. When in strict-mode, the queues will be services
|
|
by numerical priority from lowest to highest. Lower priority
|
|
queues will not be services until the current queue is drained.
|
|
When set to weightedFairQ, the number of slices in a
|
|
particular queue determines the frequency of servicing.
|
|
A slice configuration of 00-00...100 will set the port to
|
|
strict-mode. When in enhancedTransmission mode the
|
|
non-enhanced transmission queues are serviced first using
|
|
low latency or strict priority. The remaining bandwidth
|
|
is then allocated to the enhanced transmission queues using
|
|
weightedFairQ."
|
|
::= { etsysCosTxqPortCfgEntry 1 }
|
|
|
|
etsysCosTxqPortSliceSetting OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is an octet string in which the number of octets
|
|
corresponds to the number of transmit queues for each
|
|
dot1dBridge port. The value of the first octet represents the
|
|
number of 'slices' of transmit resources to allocate to
|
|
Queue 0, the second octet represents the number for Queue 1,
|
|
and so forth. The sum of all the octets in the octet string
|
|
must add up to the total number of slices available for that
|
|
port type as defined in etsysCosTxqNumberOfSlices.
|
|
|
|
For example, on a port having 4 transmit queues and where
|
|
transmit resources are divided into 16 slices, writing an
|
|
octet string of {0x00, 0x04, 0x04, 0x08} would have the
|
|
following effect:
|
|
|
|
At least 50% of the frames transmitted are from Queue 3
|
|
At least 25% of the frames transmitted are from Queue 2
|
|
At least 25% of the frames transmitted are from Queue 1
|
|
No frames will be transmitted from Queue 0 until Queues 1,
|
|
2 and 3 are empty.
|
|
|
|
This value MAY be superseded by etsysCosTxqPortEnhancedTransGroupId
|
|
when the arb mode is enhancedTransmission."
|
|
::= { etsysCosTxqPortCfgEntry 2 }
|
|
|
|
etsysCosTxqPortEnhancedTransMaxGroups OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of Enhanced Transmission Groups supported
|
|
for this port type."
|
|
::= { etsysCosTxqPortCfgEntry 3 }
|
|
|
|
etsysCosTxqPortEnhancedTransGroupId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is an octet string in which the number of
|
|
octets corresponds to the number of traffic class
|
|
queues for each dot1dBridgePort. The value of the first
|
|
octet represents the Enhanced Transmission Group id
|
|
for the first traffic class group, the second octet
|
|
represents the Enhanced Transmission Group id for the
|
|
second traffic class and so forth.
|
|
|
|
Setting the queue to a value between 1 to
|
|
etsysCosTxqPortEnhancedTransMaxGroups will enable the
|
|
queue for Enhanced Transmission Selection. A value of
|
|
0 will disable the queue for Enhanced Transmission
|
|
Selection. All other values are not accepted.
|
|
|
|
This value will supersede etsysCosTxqPortSliceSetting
|
|
when the arb mode is enhancedTransmission."
|
|
::= { etsysCosTxqPortCfgEntry 4 }
|
|
|
|
etsysCosTxqPortEnhancedTransBandwidth OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is an octet string in which the number of
|
|
octets is equal to etsysCosTxqPortEnhancedTransMaxGroups.
|
|
The value of the first octet represents the percent
|
|
bandwidth to be allocated to the first Enhanced Transmission
|
|
Selection group, the second octet represents the bandwidth
|
|
for the second Enhanced Transmission Selection group and
|
|
so forth. The sum of all Enhanced Transmission Selection
|
|
Groups must be 100."
|
|
::= { etsysCosTxqPortCfgEntry 5 }
|
|
|
|
etsysCosTxqPortEnhancedTransGroupToDcbxTC OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is an octet string in which the number of octets
|
|
is equal to etsysCosTxqPortEnhancedTransMaxGroups. The value
|
|
of the first octet represents the DCB Enhanced Transmission
|
|
Selection Traffic Class number for the first group. The second
|
|
octet represents the DCB Enhanced Transmission Selection
|
|
Traffic Class number for the second group and so forth.
|
|
|
|
DCB Enhanced Transmission Selection Traffic Classes correspond
|
|
to a value of 0 to 7 which is defined by 802.1D. A value of
|
|
255 means the group is not part of Enhanced Transmission."
|
|
::= { etsysCosTxqPortCfgEntry 6 }
|
|
|
|
etsysCosTxqPortEnhancedTransPriorityToDcbxTC OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is an octet string that maps dot1d priorities to
|
|
DCB Enhanced Transmission Selection Traffic Classes. The first
|
|
octet represents the DCB Traffic class for priority 0. The second
|
|
octet represents the DCB Traffic class for priority 1 and so
|
|
forth."
|
|
::= { etsysCosTxqPortCfgEntry 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqResourceTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing rate, units and queuing algorithm to be
|
|
used in the entries specified."
|
|
::= { etsysCosTxq 9 }
|
|
|
|
etsysCosTxqResourceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTxqResourceTable. These entries contain the specific
|
|
attributes of transmission rates (traffic shaping) and
|
|
dropping styles to be applied to dot1dBridge ports. Entries
|
|
within this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets."
|
|
INDEX { etsysCosTxqPortGroupIndex,
|
|
etsysCosTxqPortTypeIndex,
|
|
etsysCosTxqResourceQueueNum }
|
|
::= { etsysCosTxqResourceTable 1 }
|
|
|
|
EtsysCosTxqResourceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTxqResourceQueueNum
|
|
Integer32,
|
|
etsysCosTxqPortQUnit
|
|
EtsysCosRateTypes,
|
|
etsysCosTxqPortQRate
|
|
Integer32,
|
|
etsysCosTxqPortQAlgorithm
|
|
TxqAlgorithms,
|
|
etsysCosTxqPortQLLQenable
|
|
EnabledStatus,
|
|
etsysCosTxqPortQMinRate
|
|
Integer32
|
|
}
|
|
|
|
etsysCosTxqResourceQueueNum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue number associated with this entry."
|
|
::= { etsysCosTxqResourceEntry 1 }
|
|
|
|
etsysCosTxqPortQUnit OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the unit size for the etsysCosTxqPortRate.
|
|
Values MUST NOT exceed the capacity of the
|
|
etsysCosTxqPortType they are associated with."
|
|
::= { etsysCosTxqResourceEntry 2 }
|
|
|
|
etsysCosTxqPortQRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the number of units used in this queue
|
|
configuration. The value (0) shall carry special meaning
|
|
that indicates the settings MUST NOT be applied to the
|
|
queue."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosTxqResourceEntry 3 }
|
|
|
|
etsysCosTxqPortQAlgorithm OBJECT-TYPE
|
|
SYNTAX TxqAlgorithms
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the rules by which discarding is applied."
|
|
::= { etsysCosTxqResourceEntry 4 }
|
|
|
|
etsysCosTxqPortQLLQenable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the requested use of low latency
|
|
queues for this dot1dBridge port. This object is REQUIRED to
|
|
fail set attempts for unsupported hardware."
|
|
::= { etsysCosTxqResourceEntry 5 }
|
|
|
|
etsysCosTxqPortQMinRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the minimum number of units used in this
|
|
queue configuration. The value (0) shall carry special
|
|
meaning that indicates the settings MUST NOT be applied
|
|
to the queue."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosTxqResourceEntry 6 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqReferenceMappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqReferenceMappingMaxReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of etsysCosTxqReferences allowed in the
|
|
etsysCosTxqMappingTable."
|
|
::= { etsysCosTxq 10 }
|
|
|
|
etsysCosTxqReferenceMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqReferenceMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user defined mappings of the TxQ
|
|
refences found in the etsysCosTable to physical transmit queues
|
|
associated with the specified port-group."
|
|
::= { etsysCosTxq 11 }
|
|
|
|
etsysCosTxqReferenceMappingEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqReferenceMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosTxqReferenceMappingTable. Entries within this table
|
|
MUST be considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosTxqPortGroupIndex,
|
|
etsysCosTxqPortTypeIndex,
|
|
etsysCosTxqReference}
|
|
::= { etsysCosTxqReferenceMappingTable 1 }
|
|
|
|
EtsysCosTxqReferenceMappingEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTxqResourceQueueNumber
|
|
Integer32
|
|
}
|
|
|
|
etsysCosTxqResourceQueueNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue number to be bound to this reference."
|
|
::= { etsysCosTxqReferenceMappingEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqDropProfiles Table
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqDropProfilesMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries allowed in the
|
|
etsysCosDropProfiles Table."
|
|
::= { etsysCosTxq 12 }
|
|
|
|
etsysCosTxqDropProfilesNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the etsysCosQueueProfiles
|
|
Table."
|
|
::= { etsysCosTxq 13 }
|
|
|
|
etsysCosTxqDropProfilesLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosQueueProfiles Table was last
|
|
modified."
|
|
::= { etsysCosTxq 14 }
|
|
|
|
etsysCosTxqDropProfilesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqDropProfilesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the queue profile configurations."
|
|
::= { etsysCosTxq 15 }
|
|
|
|
etsysCosTxqDropProfilesEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqDropProfilesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum and maximum queue depth, maximum drop probability
|
|
and queue depth at max drop probability for the queue
|
|
specified. These entries represent the currently configured
|
|
settings for this agent. Entries indexed with (0) are default
|
|
system entries. Entries within this table MUST be considered
|
|
non-volatile and MUST be maintained across entity resets."
|
|
INDEX { etsysCosTxqDropSettingIndex }
|
|
::= { etsysCosTxqDropProfilesTable 1 }
|
|
|
|
EtsysCosTxqDropProfilesEntry ::=
|
|
SEQUENCE { etsysCosTxqDropSettingIndex
|
|
Unsigned32,
|
|
etsysCosTxqDropProfilesRowStatus
|
|
RowStatus,
|
|
etsysCosTxqDropProfilesMin
|
|
Integer32,
|
|
etsysCosTxqDropProfilesMax
|
|
Integer32,
|
|
etsysCosTxqDropProfilesMaxDropProb
|
|
Integer32,
|
|
etsysCosTxqDropProfilesQueueDepthAtMaxProb
|
|
Integer32
|
|
}
|
|
|
|
etsysCosTxqDropSettingIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 -- (0..etsysCosTxqDropProfilesMaxEntries)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique identifier for this queue setting. Identifiers with
|
|
an index of 0 MUST be read-only and depict the system default
|
|
settings."
|
|
::= { etsysCosTxqDropProfilesEntry 1 }
|
|
|
|
etsysCosTxqDropProfilesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosTxqDropProfilesTable. Entries
|
|
within this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets."
|
|
::= { etsysCosTxqDropProfilesEntry 2 }
|
|
|
|
etsysCosTxqDropProfilesMin OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum percentage of the queue depth, above which frames
|
|
will dropped at the drop probability rate."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosTxqDropProfilesEntry 3 }
|
|
|
|
etsysCosTxqDropProfilesMax OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum percentage of the queue depth, above which all
|
|
frames will be dropped. This object's value MUST be greater
|
|
than or equal to the etsysCosTxqDropProfilesMin."
|
|
DEFVAL { 100 }
|
|
::= { etsysCosTxqDropProfilesEntry 4 }
|
|
|
|
etsysCosTxqDropProfilesMaxDropProb OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop probability associated with this setting by
|
|
percentage. This number represents the percentage of traffic
|
|
that will be dropped once the minimum rate has been exceeded."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosTxqDropProfilesEntry 5 }
|
|
|
|
etsysCosTxqDropProfilesQueueDepthAtMaxProb OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop probability percentage slope which defines how
|
|
aggressively packets are discarded as the queue fills."
|
|
DEFVAL { 100 }
|
|
::= { etsysCosTxqDropProfilesEntry 6 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosTxqDropPrecedence
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosTxqDropPrecedenceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosTxqDropPrecedenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the drop precedence configurations."
|
|
::= { etsysCosTxq 16 }
|
|
|
|
etsysCosTxqDropPrecedenceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosTxqDropPrecedenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop precedence definitions for the queue specified."
|
|
INDEX { etsysCosTxqPortGroupIndex,
|
|
etsysCosTxqPortTypeIndex,
|
|
etsysCosTxqResourceQueueNum,
|
|
etsysCosTableDropPrecedence}
|
|
::= { etsysCosTxqDropPrecedenceTable 1 }
|
|
|
|
EtsysCosTxqDropPrecedenceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosTableDropPrecedence
|
|
Unsigned32,
|
|
etsysCosTxqDropProfileQueueCfgID
|
|
Integer32
|
|
}
|
|
|
|
etsysCosTableDropPrecedence OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding etsysCosDropPrecedence from the
|
|
etsysCosTable this entry refers to."
|
|
::= { etsysCosTxqDropPrecedenceEntry 1 }
|
|
|
|
etsysCosTxqDropProfileQueueCfgID OBJECT-TYPE
|
|
SYNTAX Integer32 -- (0 .. etsysCosTxqDropProfilesMaxEntries)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The etsysCosTxqDropProfilesEntry that describes the
|
|
configuration for this entry. If this value references
|
|
a non-existent row in the etsysCosTxqDropPrecedenceTable the
|
|
device will behave as if the row existed and was populated with
|
|
default parameters."
|
|
::= { etsysCosTxqDropPrecedenceEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrl group
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlPortTypeTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlPortTypeMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual number of distinctly unique (as defined by
|
|
the set of shared inbound RateLimiting capabilities)
|
|
port types available for configuration on this agent."
|
|
::= { etsysCosIrl 1 }
|
|
|
|
etsysCosIrlPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table defining the distinctly unique IRL
|
|
characteristics of a group of ports."
|
|
::= { etsysCosIrl 2 }
|
|
|
|
etsysCosIrlPortTypeEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlPortTypeTable."
|
|
INDEX { etsysCosIrlPortTypeIndex }
|
|
::= { etsysCosIrlPortTypeTable 1 }
|
|
|
|
EtsysCosIrlPortTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosIrlPortTypeIndex
|
|
Integer32,
|
|
etsysCosIrlPortTypeDescr
|
|
SnmpAdminString,
|
|
etsysCosIrlPortTypeEligiblePorts
|
|
PortList,
|
|
etsysCosIrlPortTypeUnselectedPorts
|
|
PortList,
|
|
etsysCosIrlPortTypeNumberOfIRLs
|
|
Integer32,
|
|
etsysCosIrlPortTypeSupportedRateTypes
|
|
EtsysCosRateTypes,
|
|
etsysCosIrlPortTypeCapabilities
|
|
EtsysCosRlCapabilities
|
|
}
|
|
|
|
etsysCosIrlPortTypeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type associated with the unique set of ports sharing
|
|
these capabilities."
|
|
::= { etsysCosIrlPortTypeEntry 1 }
|
|
|
|
etsysCosIrlPortTypeDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual description that represents this set of dot1dBridge
|
|
ports."
|
|
::= { etsysCosIrlPortTypeEntry 2 }
|
|
|
|
etsysCosIrlPortTypeEligiblePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports belonging (having the same
|
|
capabilities) to this port type."
|
|
::= { etsysCosIrlPortTypeEntry 3 }
|
|
|
|
etsysCosIrlPortTypeUnselectedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports not yet bound to a user
|
|
created row (port group) in the etsysCosIrlPortGroupTable."
|
|
::= { etsysCosIrlPortTypeEntry 4 }
|
|
|
|
etsysCosIrlPortTypeNumberOfIRLs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of inbound rate limiters supported by
|
|
this agent on this type of port."
|
|
::= { etsysCosIrlPortTypeEntry 5 }
|
|
|
|
etsysCosIrlPortTypeSupportedRateTypes OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate types available on this type of port."
|
|
::= { etsysCosIrlPortTypeEntry 6 }
|
|
|
|
etsysCosIrlPortTypeCapabilities OBJECT-TYPE
|
|
SYNTAX EtsysCosRlCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosRlCapabilities available on this type of port."
|
|
::= { etsysCosIrlPortTypeEntry 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlUnitTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the rate type, minimum and maximum limits
|
|
of the port groups and their respective granularity."
|
|
::= { etsysCosIrl 3 }
|
|
|
|
etsysCosIrlUnitEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlUnitTable. Entries in this table indicate the port
|
|
group boundaries for the type of port specified."
|
|
INDEX { etsysCosIrlPortTypeIndex,
|
|
etsysCosIrlUnitTypeIndex }
|
|
::= { etsysCosIrlUnitTable 1 }
|
|
|
|
EtsysCosIrlUnitEntry ::=
|
|
SEQUENCE {
|
|
etsysCosIrlUnitTypeIndex
|
|
EtsysCosRateTypes,
|
|
etsysCosIrlUnitMaxRate
|
|
Unsigned32,
|
|
etsysCosIrlUnitMinRate
|
|
Unsigned32,
|
|
etsysCosIrlUnitGranularity
|
|
Unsigned32
|
|
}
|
|
|
|
etsysCosIrlUnitTypeIndex OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit identifier for this port type. The metric at which
|
|
the etsysCosIrlUnitMinRate, etsysCosIrlUnitMaxRate and
|
|
etsysCosIrlUnitGranularity are applied."
|
|
::= { etsysCosIrlUnitEntry 1 }
|
|
|
|
etsysCosIrlUnitMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum rate supported at the rate of units specified by
|
|
etsysCosIrlUnitType."
|
|
::= { etsysCosIrlUnitEntry 2 }
|
|
|
|
etsysCosIrlUnitMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate supported at the rate of units specified by
|
|
etsysCosIrlUnitType."
|
|
::= { etsysCosIrlUnitEntry 3 }
|
|
|
|
etsysCosIrlUnitGranularity OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest unit by which a rate can be modified."
|
|
::= { etsysCosIrlUnitEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlPortGroupTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlPortGroupMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of port groups supported by this agent."
|
|
::= { etsysCosIrl 4 }
|
|
|
|
etsysCosIrlPortGroupNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of assigned dot1dBridge port groups present in this
|
|
agent. This number also reflects the port groups with a
|
|
default system setup indicated by a zero(0) index."
|
|
::= { etsysCosIrl 5 }
|
|
|
|
etsysCosIrlPortGroupLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosIrlPortTypeTable was last
|
|
modified."
|
|
::= { etsysCosIrl 6 }
|
|
|
|
etsysCosIrlPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the settings for specific types of
|
|
dot1dBridge ports and their matching inbound rate limiting
|
|
configurations."
|
|
::= { etsysCosIrl 7 }
|
|
|
|
etsysCosIrlPortGroupEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlPortTypeTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosIrlPortGroupIndex,
|
|
etsysCosIrlPortTypeIndex }
|
|
::= { etsysCosIrlPortGroupTable 1 }
|
|
|
|
EtsysCosIrlPortGroupEntry ::=
|
|
SEQUENCE {
|
|
etsysCosIrlPortGroupIndex
|
|
Integer32,
|
|
etsysCosIrlPortGroupRowStatus
|
|
RowStatus,
|
|
etsysCosIrlPortGroupList
|
|
PortList,
|
|
etsysCosIrlPortGroupName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysCosIrlPortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user-specified port group for which the settings are
|
|
defined. This value MAY have meaning to the user for the
|
|
purposes of identifying groups of dot1dBridge ports with
|
|
similar function (uplink, user, etc).
|
|
|
|
A value of zero(0) has special meaning in that it identifies
|
|
the default port grouping of characteristics present in the
|
|
agent. Entries indexed by a zero have a max-access of
|
|
read-only. This value will have a system defined maximum of
|
|
etsysCosIrlPortGroupMaxEntries."
|
|
::= { etsysCosIrlPortGroupEntry 1 }
|
|
|
|
etsysCosIrlPortGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosIrlPortGroupTable. Entries within
|
|
this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets.
|
|
|
|
When this object's value is active(1) the specified dot1dBridge
|
|
ports listed in the PortGroupList shall be removed from
|
|
UnselectedPorts.
|
|
|
|
A row in transition to the active(1) state will have its
|
|
port group list validated before activation. A port list that
|
|
cannot be made active MUST result in the row state to become
|
|
notReady(3) and no configuration action will be taken for this
|
|
row. Rows not in the active(1) state SHALL NOT be persisted
|
|
across entity resets and MUST return the ports from its
|
|
port group list to the etsysCosIrlPortTypeUnselectedPorts.
|
|
|
|
When this object's value is set to destroy(6) from an active(1)
|
|
state, all dot1dBridge ports contained in
|
|
etsysCosIrlPortGroupList shall be returned to the
|
|
etsysCosIrlPortTypeUnselectedPorts and all entries referencing
|
|
this row shall be removed as well."
|
|
|
|
::= { etsysCosIrlPortGroupEntry 2 }
|
|
|
|
etsysCosIrlPortGroupList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports to be assigned to this group.
|
|
Ports in this list MUST :
|
|
o Be mutually exclusive from other entries in this table
|
|
o Be comprised of the same port type as defined by the
|
|
etsysCosIrlPortTypeIndex."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosIrlPortGroupEntry 3 }
|
|
|
|
etsysCosIrlPortGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned textual description of this
|
|
port group."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosIrlPortGroupEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlPortCfgTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlPortCfg
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the inbound rate limiting configurations
|
|
to be used in the entries specified. Rows in this table are
|
|
populated based on rowCreation in the etsysCosIrlPortGroupTable.
|
|
Changes to this table are reflected in the
|
|
etsysCosTxqPortGroupLastChange value."
|
|
::= { etsysCosIrl 8 }
|
|
|
|
etsysCosIrlPortCfgEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlPortCfg
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlPortCfgTable. Details contained within this entry
|
|
will depict the inbound rate limiter's reception rate and
|
|
parent rate limiter. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosIrlPortGroupIndex,
|
|
etsysCosIrlPortTypeIndex }
|
|
::= { etsysCosIrlPortCfgTable 1 }
|
|
|
|
EtsysCosIrlPortCfg ::=
|
|
SEQUENCE {
|
|
etsysCosIrlPortCfgFloodLimiter
|
|
Integer32
|
|
}
|
|
|
|
etsysCosIrlPortCfgFloodLimiter OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object will represent the etsysCosIrlResourceNum
|
|
to be used to limit flooded traffic."
|
|
::= { etsysCosIrlPortCfgEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlResourceTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the inbound rate limiting configurations
|
|
to be used in the entries specified."
|
|
::= { etsysCosIrl 9 }
|
|
|
|
etsysCosIrlResourceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlResourceTable. These entries contain the specific
|
|
attributes of policing rates (traffic clipping) and
|
|
parent rate limiter. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosIrlPortGroupIndex,
|
|
etsysCosIrlPortTypeIndex,
|
|
etsysCosIrlResourceIrlNum }
|
|
::= { etsysCosIrlResourceTable 1 }
|
|
|
|
EtsysCosIrlResourceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosIrlResourceIrlNum
|
|
Unsigned32,
|
|
etsysCosIrlResourceUnits
|
|
EtsysCosRateTypes,
|
|
etsysCosIrlResourceRate
|
|
Integer32,
|
|
etsysCosIrlResourceParentIrl
|
|
Integer32,
|
|
etsysCosIrlResourceType
|
|
EtsysRateLimitingType,
|
|
etsysCosIrlResourceActionCosIndex
|
|
Integer32,
|
|
etsysCosIrlResourceAction
|
|
EtsysViolationAction,
|
|
etsysCosIrlResourceViolationPortList
|
|
PortList,
|
|
etsysCosIrlResourceClearCounters
|
|
TruthValue
|
|
}
|
|
|
|
etsysCosIrlResourceIrlNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inbound rate limiter number associated with this entry."
|
|
::= { etsysCosIrlResourceEntry 1 }
|
|
|
|
etsysCosIrlResourceUnits OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the unit size for the etsysCosIrlPortRate.
|
|
Values MUST NOT exceed the capacity of the
|
|
etsysCosIrlPortType they are associated with."
|
|
DEFVAL {{ pps }}
|
|
::= { etsysCosIrlResourceEntry 2 }
|
|
|
|
etsysCosIrlResourceRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the number of units above which packets will
|
|
considered in violation. This object is read-only for limiters
|
|
of type count(5). The value (0) shall carry special meaning
|
|
in this case of unset. Rate limiters identified as having a
|
|
value of (0) shall not have this settings applied to the
|
|
limiter."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosIrlResourceEntry 3 }
|
|
|
|
etsysCosIrlResourceParentIrl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to a positive value indicates the
|
|
etsysCosIrlResourceIrlNum to be used in conjunction with
|
|
this setting. A value of (-1) indicates the parent Irl is
|
|
not configured."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosIrlResourceEntry 4 }
|
|
|
|
etsysCosIrlResourceType OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitingType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The characteristics applied to this rate limiter. When
|
|
chaining limiters is used, the AND / OR attribute denotes the
|
|
limiter logic in handling violation. For example, option
|
|
rePrioritizeAnd(2) requires that the current limiter AND it's
|
|
parent be violated for the packet to be reprioritized. The
|
|
rePrioritizeOr(3) option only needs one OR the other to be
|
|
violated for the action to be taken."
|
|
::= { etsysCosIrlResourceEntry 5 }
|
|
|
|
etsysCosIrlResourceActionCosIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the CoS to be applied to packets
|
|
in violation of the limits set when the etsysCosIrlResourceType
|
|
is set to one of the rePrioritize types."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosIrlResourceEntry 6 }
|
|
|
|
etsysCosIrlResourceAction OBJECT-TYPE
|
|
SYNTAX EtsysViolationAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows syslog, SNMP traps, or disabling actions
|
|
to be taken limiters are first exceeded."
|
|
::= { etsysCosIrlResourceEntry 7 }
|
|
|
|
etsysCosIrlResourceViolationPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge ports this limiter has been violated on.
|
|
Writing this object will clear the dot1dBridge ports given
|
|
which have a corresponding bit of zero (0) in the PortList."
|
|
::= { etsysCosIrlResourceEntry 8 }
|
|
|
|
etsysCosIrlResourceClearCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shall always read false(2). When set to true(1)
|
|
this object clears the counter associated with this entry, if
|
|
the associated entry is a limiter of type count(5)."
|
|
::= { etsysCosIrlResourceEntry 9 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlReferenceMappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlReferenceMappingMaxReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of etsysCosIrlReferences allowed in the
|
|
etsysCosIrlMappingTable."
|
|
::= { etsysCosIrl 10 }
|
|
|
|
etsysCosIrlReferenceMappingLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosIrlReferenceMappingTable was
|
|
last modified."
|
|
::= { etsysCosIrl 11 }
|
|
|
|
etsysCosIrlReferenceMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user defined mappings of the
|
|
inbound-rate-limiter-refences found in the etsysCosTable to
|
|
actual inbound-rate-limiters associated with the specified
|
|
port-group."
|
|
::= { etsysCosIrl 12 }
|
|
|
|
etsysCosIrlReferenceMappingEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlReferenceMappingTable. Entries within this table
|
|
MUST be considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosIrlPortGroupIndex,
|
|
etsysCosIrlPortTypeIndex,
|
|
etsysCosIrlReference }
|
|
::= { etsysCosIrlReferenceMappingTable 1 }
|
|
|
|
EtsysCosIrlReferenceMap ::=
|
|
SEQUENCE {
|
|
etsysCosIrlResourceIrlNumber
|
|
Integer32
|
|
}
|
|
|
|
etsysCosIrlResourceIrlNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inbound rate limiter bond to this reference."
|
|
::= { etsysCosIrlReferenceMappingEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosIrlViolationTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlViolationClearTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object SHALL always read false. Setting this object to
|
|
true removes all existing entries from the
|
|
etsysCosIrlViolationTable."
|
|
::= { etsysCosIrl 13 }
|
|
|
|
etsysCosIrlViolationLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosIrlViolationTable was last
|
|
modified."
|
|
::= { etsysCosIrl 14 }
|
|
|
|
etsysCosIrlDisabledPortsList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports disabled as a result of limiting
|
|
violation. A set to this list will clear the violation status
|
|
of any port which has a corresponding clear bit in the list."
|
|
::= { etsysCosIrl 15 }
|
|
|
|
etsysCosIrlViolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosIrlViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the list of entries of all dot1dBridge ports
|
|
that have detected violations of the limiters current
|
|
settings."
|
|
::= { etsysCosIrl 16 }
|
|
|
|
etsysCosIrlViolationEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosIrlViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosIrlViolationTable."
|
|
INDEX { etsysCosIrlPortIndex,
|
|
etsysCosIrlResourceIrlNumber }
|
|
::= { etsysCosIrlViolationTable 1 }
|
|
|
|
EtsysCosIrlViolationEntry ::=
|
|
SEQUENCE {
|
|
etsysCosIrlPortIndex
|
|
Integer32,
|
|
etsysCosIrlViolation
|
|
TruthValue,
|
|
etsysCosIrlCounter
|
|
Counter64,
|
|
etsysCosIrlResetFlags
|
|
EtsysRateLimitResetBits
|
|
}
|
|
|
|
etsysCosIrlPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge port on which this violation occurred."
|
|
::= { etsysCosIrlViolationEntry 1 }
|
|
|
|
etsysCosIrlViolation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the violation status for this limiter.
|
|
If this object reads true(1) the action associated with this
|
|
Irl have been taken."
|
|
::= { etsysCosIrlViolationEntry 2 }
|
|
|
|
etsysCosIrlCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In order for this object to have meaningful information the
|
|
assigned limiter must be set up as a counter type limiter.
|
|
This value shall then represent the number of configured units
|
|
the limiter has recorded. If the associated limiter
|
|
is of type pps(1) then the object represents the packets
|
|
counted, otherwise it represents the octets counted."
|
|
::= { etsysCosIrlViolationEntry 3 }
|
|
|
|
etsysCosIrlResetFlags OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitResetBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value shall always read as 0. This object clears the
|
|
statistics gathering portion of this entry. If bit 0 is set,
|
|
the etsysCosIrlViolation TruthValue will be reset to false. If
|
|
bit 1 is set, the etsysCosIrlUnitCounter will be reset to zero.
|
|
Both bits set shall clear both properties."
|
|
::= { etsysCosIrlViolationEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrl group
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlPortTypeTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlPortTypeMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual number of distinctly unique (as defined by
|
|
the set of shared outbound RateLimiting capabilities)
|
|
port types available for configuration on this agent."
|
|
::= { etsysCosOrl 1 }
|
|
|
|
etsysCosOrlPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table defining the distinctly unique IRL
|
|
characteristics of a group of ports."
|
|
::= { etsysCosOrl 2 }
|
|
|
|
etsysCosOrlPortTypeEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlPortTypeTable."
|
|
INDEX { etsysCosOrlPortTypeIndex }
|
|
::= { etsysCosOrlPortTypeTable 1 }
|
|
|
|
EtsysCosOrlPortTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosOrlPortTypeIndex
|
|
Integer32,
|
|
etsysCosOrlPortTypeDescr
|
|
SnmpAdminString,
|
|
etsysCosOrlPortTypeEligiblePorts
|
|
PortList,
|
|
etsysCosOrlPortTypeUnselectedPorts
|
|
PortList,
|
|
etsysCosOrlPortTypeNumberOfORLs
|
|
Integer32,
|
|
etsysCosOrlPortTypeSupportedRateTypes
|
|
EtsysCosRateTypes,
|
|
etsysCosOrlPortTypeCapabilities
|
|
EtsysCosRlCapabilities
|
|
}
|
|
|
|
etsysCosOrlPortTypeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type associated with the unique set of ports sharing
|
|
these capabilities."
|
|
::= { etsysCosOrlPortTypeEntry 1 }
|
|
|
|
etsysCosOrlPortTypeDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual description that represents this set of dot1dBridge
|
|
ports."
|
|
::= { etsysCosOrlPortTypeEntry 2 }
|
|
|
|
etsysCosOrlPortTypeEligiblePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports belonging (having the same
|
|
capabilities) to this port type."
|
|
::= { etsysCosOrlPortTypeEntry 3 }
|
|
|
|
etsysCosOrlPortTypeUnselectedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports not yet bound to a user
|
|
created row (port group) in the etsysCosOrlPortGroupTable."
|
|
::= { etsysCosOrlPortTypeEntry 4 }
|
|
|
|
etsysCosOrlPortTypeNumberOfORLs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of outbound rate limiters supported by
|
|
this agent on this type of port."
|
|
::= { etsysCosOrlPortTypeEntry 5 }
|
|
|
|
etsysCosOrlPortTypeSupportedRateTypes OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate types available on this type of port."
|
|
::= { etsysCosOrlPortTypeEntry 6 }
|
|
|
|
etsysCosOrlPortTypeCapabilities OBJECT-TYPE
|
|
SYNTAX EtsysCosRlCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosRlCapabilities available on this type of port."
|
|
::= { etsysCosOrlPortTypeEntry 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlUnitTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the rate type, minimum and maximum limits
|
|
of the port groups and their respective granularity."
|
|
::= { etsysCosOrl 3 }
|
|
|
|
etsysCosOrlUnitEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlUnitTable. Entries in this table indicate the port
|
|
group boundaries for the type of port specified."
|
|
INDEX { etsysCosOrlPortTypeIndex,
|
|
etsysCosOrlUnitTypeIndex }
|
|
::= { etsysCosOrlUnitTable 1 }
|
|
|
|
EtsysCosOrlUnitEntry ::=
|
|
SEQUENCE {
|
|
etsysCosOrlUnitTypeIndex
|
|
EtsysCosRateTypes,
|
|
etsysCosOrlUnitMaxRate
|
|
Unsigned32,
|
|
etsysCosOrlUnitMinRate
|
|
Unsigned32,
|
|
etsysCosOrlUnitGranularity
|
|
Unsigned32
|
|
}
|
|
|
|
etsysCosOrlUnitTypeIndex OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit identifier for this port type. The metric at which
|
|
the etsysCosOrlUnitMinRate, etsysCosOrlUnitMaxRate and
|
|
etsysCosOrlUnitGranularity are applied."
|
|
::= { etsysCosOrlUnitEntry 1 }
|
|
|
|
etsysCosOrlUnitMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum rate supported at the rate of units specified by
|
|
etsysCosOrlUnitType."
|
|
::= { etsysCosOrlUnitEntry 2 }
|
|
|
|
etsysCosOrlUnitMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate supported at the rate of units specified by
|
|
etsysCosOrlUnitType."
|
|
::= { etsysCosOrlUnitEntry 3 }
|
|
|
|
etsysCosOrlUnitGranularity OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest unit by which a rate can be modified."
|
|
::= { etsysCosOrlUnitEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlPortGroupTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlPortGroupMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of port groups supported by this agent."
|
|
::= { etsysCosOrl 4 }
|
|
|
|
etsysCosOrlPortGroupNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of assigned dot1dBridge port groups present in this
|
|
agent. This number also reflects the port groups with a
|
|
default system setup indicated by a zero(0) index."
|
|
::= { etsysCosOrl 5 }
|
|
|
|
etsysCosOrlPortGroupLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosOrlPortTypeTable was last
|
|
modified."
|
|
::= { etsysCosOrl 6 }
|
|
|
|
etsysCosOrlPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the settings for specific types of
|
|
dot1dBridge ports and their matching outbound rate limiting
|
|
configurations."
|
|
::= { etsysCosOrl 7 }
|
|
|
|
etsysCosOrlPortGroupEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlPortTypeTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosOrlPortGroupIndex,
|
|
etsysCosOrlPortTypeIndex }
|
|
::= { etsysCosOrlPortGroupTable 1 }
|
|
|
|
EtsysCosOrlPortGroupEntry ::=
|
|
SEQUENCE {
|
|
etsysCosOrlPortGroupIndex
|
|
Integer32,
|
|
etsysCosOrlPortGroupRowStatus
|
|
RowStatus,
|
|
etsysCosOrlPortGroupList
|
|
PortList,
|
|
etsysCosOrlPortGroupName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysCosOrlPortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user-specified port group for which the settings are
|
|
defined. This value MAY have meaning to the user for the
|
|
purposes of identifying groups of dot1dBridge ports with
|
|
similar function (uplink, user, etc).
|
|
|
|
A value of zero(0) has special meaning in that it identifies
|
|
the default port grouping of characteristics present in the
|
|
agent. Entries indexed by a zero have a max-access of
|
|
read-only. This value will have a system defined maximum of
|
|
etsysCosOrlPortGroupMaxEntries."
|
|
::= { etsysCosOrlPortGroupEntry 1 }
|
|
|
|
etsysCosOrlPortGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosOrlPortGroupTable. Entries within
|
|
this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets.
|
|
|
|
When this object's value is active(1) the specified dot1dBridge
|
|
ports listed in the PortGroupList shall be removed from
|
|
UnselectedPorts.
|
|
|
|
A row in transition to the active(1) state will have its
|
|
port group list validated before activation. A port list that
|
|
cannot be made active MUST result in the row state to become
|
|
notReady(3) and no configuration action will be taken for this
|
|
row. Rows not in the active(1) state SHALL NOT be persisted
|
|
across entity resets and MUST return the ports from its
|
|
port group list to the etsysCosOrlPortTypeUnselectedPorts.
|
|
|
|
When this object's value is set to destroy(6) from an active(1)
|
|
state, all dot1dBridge ports contained in
|
|
etsysCosOrlPortGroupList shall be returned to the
|
|
etsysCosOrlPortTypeUnselectedPorts and all entries referencing
|
|
this row shall be removed as well."
|
|
|
|
::= { etsysCosOrlPortGroupEntry 2 }
|
|
|
|
etsysCosOrlPortGroupList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports to be assigned to this group.
|
|
Ports in this list MUST :
|
|
o Be mutually exclusive from other entries in this table
|
|
o Be comprised of the same port type as defined by the
|
|
etsysCosOrlPortTypeIndex."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosOrlPortGroupEntry 3 }
|
|
|
|
etsysCosOrlPortGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned textual description of this
|
|
port group."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosOrlPortGroupEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlPortCfgTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlPortCfg
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the outbound rate limiting configurations
|
|
to be used in the entries specified. Rows in this table are
|
|
populated based on rowCreation in the etsysCosOrlPortGroupTable.
|
|
Changes to this table are reflected in the
|
|
etsysCosTxqPortGroupLastChange value."
|
|
::= { etsysCosOrl 8 }
|
|
|
|
etsysCosOrlPortCfgEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlPortCfg
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlPortCfgTable. Details contained within this entry
|
|
will depict the outbound rate limiter's reception rate and
|
|
parent rate limiter. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosOrlPortGroupIndex,
|
|
etsysCosOrlPortTypeIndex }
|
|
::= { etsysCosOrlPortCfgTable 1 }
|
|
|
|
EtsysCosOrlPortCfg ::=
|
|
SEQUENCE {
|
|
etsysCosOrlPortCfgFloodLimiter
|
|
Integer32
|
|
}
|
|
|
|
etsysCosOrlPortCfgFloodLimiter OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the etsysCosOrlResourceNum
|
|
to be used to limit flooded traffic."
|
|
::= { etsysCosOrlPortCfgEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlResourceTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the outbound rate limiting configurations
|
|
to be used in the entries specified."
|
|
::= { etsysCosOrl 9 }
|
|
|
|
etsysCosOrlResourceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlResourceTable. These entries contain the specific
|
|
attributes of policing rates (traffic clipping) and
|
|
parent rate limiter. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosOrlPortGroupIndex,
|
|
etsysCosOrlPortTypeIndex,
|
|
etsysCosOrlResourceOrlNum }
|
|
::= { etsysCosOrlResourceTable 1 }
|
|
|
|
EtsysCosOrlResourceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosOrlResourceOrlNum
|
|
Unsigned32,
|
|
etsysCosOrlResourceUnits
|
|
EtsysCosRateTypes,
|
|
etsysCosOrlResourceRate
|
|
Integer32,
|
|
etsysCosOrlResourceParentOrl
|
|
Integer32,
|
|
etsysCosOrlResourceType
|
|
EtsysRateLimitingType,
|
|
etsysCosOrlResourceActionCosIndex
|
|
Integer32,
|
|
etsysCosOrlResourceAction
|
|
EtsysViolationAction,
|
|
etsysCosOrlResourceViolationPortList
|
|
PortList,
|
|
etsysCosOrlResourceClearCounters
|
|
TruthValue
|
|
}
|
|
|
|
etsysCosOrlResourceOrlNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outbound rate limiter number associated with this entry."
|
|
::= { etsysCosOrlResourceEntry 1 }
|
|
|
|
etsysCosOrlResourceUnits OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the unit size for the etsysCosOrlPortRate.
|
|
Values MUST NOT exceed the capacity of the
|
|
etsysCosOrlPortType they are associated with."
|
|
DEFVAL {{ pps }}
|
|
::= { etsysCosOrlResourceEntry 2 }
|
|
|
|
etsysCosOrlResourceRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the number of units above which packets will
|
|
considered in violation. This object is read-only for limiters
|
|
of type count(5). The value (0) shall carry special meaning
|
|
in this case of unset. Rate limiters identified as having a
|
|
value of (0) shall not have this settings applied to the
|
|
limiter."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosOrlResourceEntry 3 }
|
|
|
|
etsysCosOrlResourceParentOrl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to a positive value indicates the
|
|
etsysCosOrlResourceOrlNum to be used in conjunction with
|
|
this setting. A value of (-1) indicates the parent Orl is
|
|
not configured."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosOrlResourceEntry 4 }
|
|
|
|
etsysCosOrlResourceType OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitingType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The characteristics applied to this rate limiter. When
|
|
chaining limiters is used, the AND / OR attribute denotes the
|
|
limiter logic in handling violation. For example, option
|
|
rePrioritizeAnd(2) requires that the current limiter AND it's
|
|
parent be violated for the packet to be reprioritized. The
|
|
rePrioritizeOr(3) option only needs one OR the other to be
|
|
violated for the action to be taken."
|
|
::= { etsysCosOrlResourceEntry 5 }
|
|
|
|
etsysCosOrlResourceActionCosIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the CoS to be applied to packets
|
|
in violation of the limits set when the etsysCosOrlResourceType
|
|
is set to one of the rePrioritize types."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosOrlResourceEntry 6 }
|
|
|
|
etsysCosOrlResourceAction OBJECT-TYPE
|
|
SYNTAX EtsysViolationAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows syslog, SNMP traps, or disabling actions
|
|
to be taken limiters are first exceeded."
|
|
::= { etsysCosOrlResourceEntry 7 }
|
|
|
|
etsysCosOrlResourceViolationPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge ports this limiter has been violated on.
|
|
Writing this object will clear the dot1dBridge ports given
|
|
which have a corresponding bit of zero (0) in the PortList."
|
|
::= { etsysCosOrlResourceEntry 8 }
|
|
|
|
etsysCosOrlResourceClearCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shall always read false(2). When set to true(1)
|
|
this object clears the counter associated with this entry, if
|
|
the associated entry is a limiter of type count(5)."
|
|
::= { etsysCosOrlResourceEntry 9 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlReferenceMappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlReferenceMappingMaxReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of etsysCosOrlReferences allowed in the
|
|
etsysCosOrlMappingTable."
|
|
::= { etsysCosOrl 10 }
|
|
|
|
etsysCosOrlReferenceMappingLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosOrlReferenceMappingTable was
|
|
last modified."
|
|
::= { etsysCosOrl 11 }
|
|
|
|
etsysCosOrlReferenceMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user defined mappings of the
|
|
outbound-rate-limiter-refences found in the etsysCosTable to
|
|
actual outbound-rate-limiters associated with the specified
|
|
port-group."
|
|
::= { etsysCosOrl 12 }
|
|
|
|
etsysCosOrlReferenceMappingEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlReferenceMappingTable. Entries within this table
|
|
MUST be considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosOrlPortGroupIndex,
|
|
etsysCosOrlPortTypeIndex,
|
|
etsysCosOrlReference }
|
|
::= { etsysCosOrlReferenceMappingTable 1 }
|
|
|
|
EtsysCosOrlReferenceMap ::=
|
|
SEQUENCE {
|
|
etsysCosOrlResourceOrlNumber
|
|
Integer32
|
|
}
|
|
|
|
etsysCosOrlResourceOrlNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outbound rate limiter bond to this reference."
|
|
::= { etsysCosOrlReferenceMappingEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosOrlViolationTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosOrlViolationClearTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object SHALL always read false. Setting this object to
|
|
true removes all existing entries from the
|
|
etsysCosOrlViolationTable."
|
|
::= { etsysCosOrl 13 }
|
|
|
|
etsysCosOrlViolationLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosOrlViolationTable was last
|
|
modified."
|
|
::= { etsysCosOrl 14 }
|
|
|
|
etsysCosOrlDisabledPortsList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports disabled as a result of limiting
|
|
violation. A set to this list will clear the violation status
|
|
of any port which has a corresponding clear bit in the list."
|
|
::= { etsysCosOrl 15 }
|
|
|
|
etsysCosOrlViolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosOrlViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the list of entries of all dot1dBridge ports
|
|
that have detected violations of the limiters current
|
|
settings."
|
|
::= { etsysCosOrl 16 }
|
|
|
|
etsysCosOrlViolationEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosOrlViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosOrlViolationTable."
|
|
INDEX { etsysCosOrlPortIndex,
|
|
etsysCosOrlResourceOrlNumber }
|
|
::= { etsysCosOrlViolationTable 1 }
|
|
|
|
EtsysCosOrlViolationEntry ::=
|
|
SEQUENCE {
|
|
etsysCosOrlPortIndex
|
|
Integer32,
|
|
etsysCosOrlViolation
|
|
TruthValue,
|
|
etsysCosOrlCounter
|
|
Counter64,
|
|
etsysCosOrlResetFlags
|
|
EtsysRateLimitResetBits
|
|
}
|
|
|
|
etsysCosOrlPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge port on which this violation occurred."
|
|
::= { etsysCosOrlViolationEntry 1 }
|
|
|
|
etsysCosOrlViolation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the violation status for this limiter.
|
|
If this object reads true(1) the action associated with this
|
|
Orl have been taken."
|
|
::= { etsysCosOrlViolationEntry 2 }
|
|
|
|
etsysCosOrlCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In order for this object to have meaningful information the
|
|
assigned limiter must be set up as a counter type limiter.
|
|
This value shall then represent the number of configured units
|
|
the limiter has recorded. If the associated limiter
|
|
is of type pps(0) then the object represents the packets
|
|
counted, otherwise it represents the octets counted."
|
|
::= { etsysCosOrlViolationEntry 3 }
|
|
|
|
etsysCosOrlResetFlags OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitResetBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value shall always read as 0. This object clears the
|
|
statistics gathering portion of this entry. If bit 0 is set,
|
|
the etsysCosOrlViolation TruthValue will be reset to false. If
|
|
bit 1 is set, the etsysCosOrlUnitCounter will be reset to zero.
|
|
Both bits set shall clear both properties."
|
|
::= { etsysCosOrlViolationEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosFloodControl
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosFloodCtrlPortTypeTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosFloodCtrlPortTypeMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual number of distinctly unique (as defined by
|
|
the set of shared flooded RateLimiting capabilities)
|
|
port types available for configuration on this agent."
|
|
::= { etsysCosFloodControl 1 }
|
|
|
|
etsysCosFloodCtrlPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosFloodCtrlPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table defining the distinctly unique Broadcast Rate Limiting
|
|
characteristics of a group of ports."
|
|
::= { etsysCosFloodControl 2 }
|
|
|
|
etsysCosFloodCtrlPortTypeEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosFloodCtrlPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosFloodCtrlPortTypeTable."
|
|
INDEX { etsysCosFloodCtrlPortTypeIndex }
|
|
::= { etsysCosFloodCtrlPortTypeTable 1 }
|
|
|
|
EtsysCosFloodCtrlPortTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosFloodCtrlPortTypeIndex
|
|
Integer32,
|
|
etsysCosFloodCtrlPortTypeDescr
|
|
SnmpAdminString,
|
|
etsysCosFloodCtrlPortTypeEligiblePorts
|
|
PortList,
|
|
etsysCosFloodCtrlPortTypeUnselectedPorts
|
|
PortList,
|
|
etsysCosFloodCtrlPortTypeSupportedRateTypes
|
|
EtsysCosRateTypes,
|
|
etsysCosFloodCtrlPortTypeCapabilities
|
|
EtsysCosRlCapabilities
|
|
}
|
|
|
|
etsysCosFloodCtrlPortTypeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type associated with the unique set of ports sharing
|
|
these capabilities."
|
|
::= { etsysCosFloodCtrlPortTypeEntry 1 }
|
|
|
|
etsysCosFloodCtrlPortTypeDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual description that represents this set of dot1dBridge
|
|
ports."
|
|
::= { etsysCosFloodCtrlPortTypeEntry 2 }
|
|
|
|
etsysCosFloodCtrlPortTypeEligiblePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports belonging (having the same
|
|
capabilities) to this port type."
|
|
::= { etsysCosFloodCtrlPortTypeEntry 3 }
|
|
|
|
etsysCosFloodCtrlPortTypeUnselectedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports not yet bound to a user
|
|
created row (port group) in the etsysCosFloodCtrlPortGroupTable."
|
|
::= { etsysCosFloodCtrlPortTypeEntry 4 }
|
|
|
|
etsysCosFloodCtrlPortTypeSupportedRateTypes OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate types available on this type of port."
|
|
::= { etsysCosFloodCtrlPortTypeEntry 5 }
|
|
|
|
etsysCosFloodCtrlPortTypeCapabilities OBJECT-TYPE
|
|
SYNTAX EtsysCosRlCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosRlCapabilities available on this type of port."
|
|
::= { etsysCosFloodCtrlPortTypeEntry 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosFloodCtrlUnitTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosFloodCtrlUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosFloodCtrlUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the rate type, minimum and maximum limits
|
|
of the port groups and their respective granularity."
|
|
::= { etsysCosFloodControl 3 }
|
|
|
|
etsysCosFloodCtrlUnitEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosFloodCtrlUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosFloodCtrlUnitTable. Entries in this table indicate the port
|
|
group boundaries for the type of port specified."
|
|
INDEX { etsysCosFloodCtrlPortTypeIndex,
|
|
etsysCosFloodCtrlUnitTypeIndex }
|
|
::= { etsysCosFloodCtrlUnitTable 1 }
|
|
|
|
EtsysCosFloodCtrlUnitEntry ::=
|
|
SEQUENCE {
|
|
etsysCosFloodCtrlUnitTypeIndex
|
|
EtsysCosRateTypes,
|
|
etsysCosFloodCtrlUnitMaxRate
|
|
Unsigned32,
|
|
etsysCosFloodCtrlUnitMinRate
|
|
Unsigned32,
|
|
etsysCosFloodCtrlUnitGranularity
|
|
Unsigned32
|
|
}
|
|
|
|
etsysCosFloodCtrlUnitTypeIndex OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit identifier for this port type. The metric at which
|
|
the etsysCosFloodCtrlUnitMinRate, etsysCosFloodCtrlUnitMaxRate and
|
|
etsysCosFloodCtrlUnitGranularity are applied."
|
|
::= { etsysCosFloodCtrlUnitEntry 1 }
|
|
|
|
etsysCosFloodCtrlUnitMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum rate supported at the rate of units specified by
|
|
etsysCosFloodCtrlUnitTypeIndex."
|
|
::= { etsysCosFloodCtrlUnitEntry 2 }
|
|
|
|
etsysCosFloodCtrlUnitMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate supported at the rate of units specified by
|
|
etsysCosFloodCtrlUnitTypeIndex."
|
|
::= { etsysCosFloodCtrlUnitEntry 3 }
|
|
|
|
etsysCosFloodCtrlUnitGranularity OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest unit by which a rate can be modified."
|
|
::= { etsysCosFloodCtrlUnitEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosFloodCtrlPortGroupTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosFloodCtrlPortGroupMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of port groups supported by this agent."
|
|
::= { etsysCosFloodControl 4 }
|
|
|
|
etsysCosFloodCtrlPortGroupNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of assigned dot1dBridge port groups present in this
|
|
agent. This number also reflects the port groups with a
|
|
default system setup indicated by a zero(0) index."
|
|
::= { etsysCosFloodControl 5 }
|
|
|
|
etsysCosFloodCtrlPortGroupLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosFloodCtrlPortTypeTable was last
|
|
modified."
|
|
::= { etsysCosFloodControl 6 }
|
|
|
|
etsysCosFloodCtrlPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosFloodCtrlPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the settings for specific types of
|
|
dot1dBridge ports and their matching flooded rate limiting
|
|
configurations."
|
|
::= { etsysCosFloodControl 7 }
|
|
|
|
etsysCosFloodCtrlPortGroupEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosFloodCtrlPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosFloodCtrlPortTypeTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosFloodCtrlPortGroupIndex,
|
|
etsysCosFloodCtrlPortTypeIndex }
|
|
::= { etsysCosFloodCtrlPortGroupTable 1 }
|
|
|
|
EtsysCosFloodCtrlPortGroupEntry ::=
|
|
SEQUENCE {
|
|
etsysCosFloodCtrlPortGroupIndex
|
|
Integer32,
|
|
etsysCosFloodCtrlPortGroupRowStatus
|
|
RowStatus,
|
|
etsysCosFloodCtrlPortGroupList
|
|
PortList,
|
|
etsysCosFloodCtrlPortGroupName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysCosFloodCtrlPortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..32767)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user-specified port group for which the settings are
|
|
defined. This value MAY have meaning to the user for the
|
|
purposes of identifying groups of dot1dBridge ports with
|
|
similar function (uplink, user, etc).
|
|
|
|
A value of zero(0) has special meaning in that it identifies
|
|
the default port grouping of characteristics present in the
|
|
agent. Entries indexed by a zero have a max-access of
|
|
read-only. This value will have a system defined maximum of
|
|
etsysCosFloodCtrlPortGroupMaxEntries."
|
|
::= { etsysCosFloodCtrlPortGroupEntry 1 }
|
|
|
|
etsysCosFloodCtrlPortGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosFloodCtrlPortGroupTable. Entries within
|
|
this table MUST be considered non-volatile and MUST be
|
|
maintained across entity resets.
|
|
|
|
When this object's value is active(1) the specified dot1dBridge
|
|
ports listed in the PortGroupList shall be removed from
|
|
UnselectedPorts.
|
|
|
|
A row in transition to the active(1) state will have its
|
|
port group list validated before activation. A port list that
|
|
cannot be made active MUST result in the row state to become
|
|
notReady(3) and no configuration action will be taken for this
|
|
row. Rows not in the active(1) state SHALL NOT be persisted
|
|
across entity resets and MUST return the ports from its
|
|
port group list to the etsysCosFloodCtrlPortTypeUnselectedPorts.
|
|
|
|
When this object's value is set to destroy(6) from an active(1)
|
|
state, all dot1dBridge ports contained in
|
|
etsysCosFloodCtrlPortGroupList shall be returned to the
|
|
etsysCosFloodCtrlPortTypeUnselectedPorts and all entries referencing
|
|
this row shall be removed as well."
|
|
|
|
::= { etsysCosFloodCtrlPortGroupEntry 2 }
|
|
|
|
etsysCosFloodCtrlPortGroupList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports to be assigned to this group.
|
|
Ports in this list MUST :
|
|
o Be mutually exclusive from other entries in this table
|
|
o Be comprised of the same port type as defined by the
|
|
etsysCosFloodCtrlPortTypeIndex."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosFloodCtrlPortGroupEntry 3 }
|
|
|
|
etsysCosFloodCtrlPortGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned textual description of this
|
|
port group."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosFloodCtrlPortGroupEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosFloodCtrlResourceTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosFloodCtrlSyslogActionMsgFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notification(1),
|
|
notificationWithPktHdr(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the format of syslog messages sent in
|
|
response to a flood rate limit being violated.
|
|
|
|
A value of notification(1) causes the syslog message to
|
|
provide the index of the violated limiter and the port(s) that
|
|
the violation occurred on.
|
|
|
|
A value of notificationWithPktHdr(2) causes the syslog message
|
|
to provide the first 64 bytes of the violating packet in
|
|
addition to the information provided by notification(1)."
|
|
DEFVAL { notification }
|
|
::= { etsysCosFloodControl 8 }
|
|
|
|
etsysCosFloodCtrlResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosFloodCtrlResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the inbound rate limiting configurations
|
|
to be used in the entries specified."
|
|
::= { etsysCosFloodControl 9 }
|
|
|
|
etsysCosFloodCtrlResourceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosFloodCtrlResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosFloodCtrlResourceTable. These entries contain the
|
|
specific attributes of flood policing rates (traffic clipping).
|
|
Entries within this table MUST be considered non-volatile and
|
|
MUST be maintained across entity resets."
|
|
INDEX { etsysCosFloodCtrlPortGroupIndex,
|
|
etsysCosFloodCtrlPortTypeIndex,
|
|
etsysCosFloodCtrlFloodType }
|
|
::= { etsysCosFloodCtrlResourceTable 1 }
|
|
|
|
EtsysCosFloodCtrlResourceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosFloodCtrlFloodType
|
|
INTEGER,
|
|
etsysCosFloodCtrlResourceUnits
|
|
EtsysCosRateTypes,
|
|
etsysCosFloodCtrlResourceRate
|
|
Integer32,
|
|
etsysCosFloodCtrlResourceAction
|
|
BITS,
|
|
etsysCosFloodCtrlResourceViolationPortList
|
|
PortList,
|
|
etsysCosFloodCtrlResourceClearCounters
|
|
TruthValue
|
|
}
|
|
|
|
etsysCosFloodCtrlFloodType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicastUnknown(1),
|
|
multicast(2),
|
|
broadcast(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of received traffic that rate limited based on this
|
|
row entries configured limits."
|
|
::= { etsysCosFloodCtrlResourceEntry 1 }
|
|
|
|
etsysCosFloodCtrlResourceUnits OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the unit size for the etsysCosFloodCtrlPortRate.
|
|
Values MUST NOT exceed the capacity of the
|
|
etsysCosFloodCtrlPortType they are associated with."
|
|
DEFVAL {{ pps }}
|
|
::= { etsysCosFloodCtrlResourceEntry 2 }
|
|
|
|
etsysCosFloodCtrlResourceRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the number of units above which packets will
|
|
considered in violation.
|
|
|
|
The value (0) shall carry special meaning
|
|
in this case of unset. Rate limiters identified as having a
|
|
value of (0) shall not have this settings applied to the
|
|
limiter."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosFloodCtrlResourceEntry 3 }
|
|
|
|
etsysCosFloodCtrlResourceAction OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
drop(0), -- Packets will be dropped.
|
|
syslog(1), -- Syslog on first violation.
|
|
trap(2), -- SNMP Notify on first violation.
|
|
disable(3) -- Disable ingress port on first violation.
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows packet dropping, syslog, SNMP traps, or disabling
|
|
actions to be taken limiters are first exceeded. It is permissible
|
|
for no actions to be specified, which effectively disables the
|
|
limiter."
|
|
DEFVAL {{ drop }}
|
|
::= { etsysCosFloodCtrlResourceEntry 4 }
|
|
|
|
etsysCosFloodCtrlResourceViolationPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge ports this limiter has been violated on.
|
|
Writing this object will clear the dot1dBridge ports given
|
|
which have a corresponding bit of zero (0) in the PortList."
|
|
::= { etsysCosFloodCtrlResourceEntry 5 }
|
|
|
|
etsysCosFloodCtrlResourceClearCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shall always read false(2). When set to true(1)
|
|
this object clears the counter associated with this entry."
|
|
::= { etsysCosFloodCtrlResourceEntry 6 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosFloodCtrlViolationTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosFloodCtrlViolationClearTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object SHALL always read false. Setting this object to
|
|
true removes all existing entries from the
|
|
etsysCosFloodCtrlViolationTable."
|
|
::= { etsysCosFloodControl 10 }
|
|
|
|
etsysCosFloodCtrlViolationLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosFloodCtrlViolationTable was last
|
|
modified."
|
|
::= { etsysCosFloodControl 11 }
|
|
|
|
etsysCosFloodCtrlDisabledPortsList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports disabled as a result of limiting
|
|
violation. A set to this list will clear the violation status
|
|
of any port which has a corresponding clear bit in the list."
|
|
::= { etsysCosFloodControl 12 }
|
|
|
|
etsysCosFloodCtrlViolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosFloodCtrlViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the list of entries of all dot1dBridge ports
|
|
that have detected violations of the limiters current
|
|
settings."
|
|
::= { etsysCosFloodControl 13 }
|
|
|
|
etsysCosFloodCtrlViolationEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosFloodCtrlViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosFloodCtrlViolationTable."
|
|
INDEX { dot1dBasePort, etsysCosFloodCtrlFloodType }
|
|
::= { etsysCosFloodCtrlViolationTable 1 }
|
|
|
|
EtsysCosFloodCtrlViolationEntry ::=
|
|
SEQUENCE {
|
|
etsysCosFloodCtrlViolation
|
|
TruthValue,
|
|
etsysCosFloodCtrlCounter
|
|
Counter64,
|
|
etsysCosFloodCtrlResetFlags
|
|
EtsysRateLimitResetBits
|
|
}
|
|
|
|
etsysCosFloodCtrlViolation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the violation status for this limiter.
|
|
If this object reads true(1) the action associated with this
|
|
FloodCtrl have been taken."
|
|
::= { etsysCosFloodCtrlViolationEntry 1 }
|
|
|
|
etsysCosFloodCtrlCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of configured units the limiter has recorded.
|
|
If the associated limiter is of type pps(1) then the object
|
|
represents the packets counted, otherwise it represents the
|
|
octets counted."
|
|
::= { etsysCosFloodCtrlViolationEntry 2 }
|
|
|
|
etsysCosFloodCtrlResetFlags OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitResetBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value shall always read as BITS contstruct with no bit set.
|
|
This object clears the statistics gathering portion of this entry.
|
|
If bit 0 is set, the etsysCosFloodCtrlViolation TruthValue will be
|
|
reset to false(2). If bit 1 is set, the
|
|
etsysCosFloodCtrlUnitCounter will be reset to zero. Setting both
|
|
bits simultaneously shall clear both properties."
|
|
::= { etsysCosFloodCtrlViolationEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrs group
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrsPortTypeTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserIrlrsPortTypeMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual number of distinctly unique (as defined by
|
|
the set of shared user rate limiting/shaping (UserRlRs)
|
|
capabilities) port types available for configuration on
|
|
this agent."
|
|
::= { etsysCosUserIrlrs 1 }
|
|
|
|
etsysCosUserIrlrsPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserIrlrsPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table defining the distinctly unique UserRlRs
|
|
characteristics of a group of ports."
|
|
::= { etsysCosUserIrlrs 2 }
|
|
|
|
etsysCosUserIrlrsPortTypeEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserIrlrsPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserIrlrsPortTypeTable."
|
|
INDEX { etsysCosUserIrlrsPortTypeIndex }
|
|
::= { etsysCosUserIrlrsPortTypeTable 1 }
|
|
|
|
EtsysCosUserIrlrsPortTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserIrlrsPortTypeIndex
|
|
Integer32,
|
|
etsysCosUserIrlrsPortTypeDescr
|
|
SnmpAdminString,
|
|
etsysCosUserIrlrsPortTypeEligiblePorts
|
|
PortList,
|
|
etsysCosUserIrlrsPortTypeUnselectedPorts
|
|
PortList,
|
|
etsysCosUserIrlrsPortTypeNumberOfUserRlRss
|
|
Integer32,
|
|
etsysCosUserIrlrsPortTypeSupportedRateTypes
|
|
EtsysCosRateTypes,
|
|
etsysCosUserIrlrsPortTypeCapabilities
|
|
EtsysCosRlCapabilities,
|
|
etsysCosUserIrlrsPortTypeModes
|
|
EtsysCosUserModeCapabilities
|
|
}
|
|
|
|
etsysCosUserIrlrsPortTypeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type associated with the unique set of ports sharing
|
|
these capabilities."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 1 }
|
|
|
|
etsysCosUserIrlrsPortTypeDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual description that represents this set of dot1dBridge
|
|
ports."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 2 }
|
|
|
|
etsysCosUserIrlrsPortTypeEligiblePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports belonging (having the same
|
|
capabilities) to this port type."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 3 }
|
|
|
|
etsysCosUserIrlrsPortTypeUnselectedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports not yet bound to a user
|
|
created row (port group) in the etsysCosUserIrlrsPortGroupTable."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 4 }
|
|
|
|
etsysCosUserIrlrsPortTypeNumberOfUserRlRss OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of user rate limiters(or shapers) supported by
|
|
this agent on this type of port."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 5 }
|
|
|
|
etsysCosUserIrlrsPortTypeSupportedRateTypes OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate types available on this type of port."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 6 }
|
|
|
|
etsysCosUserIrlrsPortTypeCapabilities OBJECT-TYPE
|
|
SYNTAX EtsysCosRlCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosRlCapabilities available on this type of port."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 7 }
|
|
|
|
etsysCosUserIrlrsPortTypeModes OBJECT-TYPE
|
|
SYNTAX EtsysCosUserModeCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosUserModeCapabilities available on this type of port."
|
|
::= { etsysCosUserIrlrsPortTypeEntry 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrsUnitTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserIrlrsUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserIrlrsUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the rate type, minimum and maximum limits
|
|
of the port groups and their respective granularity."
|
|
::= { etsysCosUserIrlrs 3 }
|
|
|
|
etsysCosUserIrlrsUnitEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserIrlrsUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserIrlrsUnitTable. Entries in this table indicate the port
|
|
group boundaries for the type of port specified."
|
|
INDEX { etsysCosUserIrlrsPortTypeIndex,
|
|
etsysCosUserIrlrsUnitTypeIndex }
|
|
::= { etsysCosUserIrlrsUnitTable 1 }
|
|
|
|
EtsysCosUserIrlrsUnitEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserIrlrsUnitTypeIndex
|
|
EtsysCosRateTypes,
|
|
etsysCosUserIrlrsUnitMaxRate
|
|
Unsigned32,
|
|
etsysCosUserIrlrsUnitMinRate
|
|
Unsigned32,
|
|
etsysCosUserIrlrsUnitGranularity
|
|
Unsigned32
|
|
}
|
|
|
|
etsysCosUserIrlrsUnitTypeIndex OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit identifier for this port type. The metric at which
|
|
the etsysCosUserIrlrsUnitMinRate,
|
|
etsysCosUserIrlrsUnitMaxRate and
|
|
etsysCosUserIrlrsUnitGranularity are applied."
|
|
::= { etsysCosUserIrlrsUnitEntry 1 }
|
|
|
|
etsysCosUserIrlrsUnitMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum rate supported at the rate of units specified by
|
|
etsysCosUserIrlrsUnitType."
|
|
::= { etsysCosUserIrlrsUnitEntry 2 }
|
|
|
|
etsysCosUserIrlrsUnitMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate supported at the rate of units specified by
|
|
etsysCosUserIrlrsUnitType."
|
|
::= { etsysCosUserIrlrsUnitEntry 3 }
|
|
|
|
etsysCosUserIrlrsUnitGranularity OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest unit by which a rate can be modified."
|
|
::= { etsysCosUserIrlrsUnitEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrsPortGroupTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserIrlrsPortGroupMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of port groups supported by this agent."
|
|
::= { etsysCosUserIrlrs 4 }
|
|
|
|
etsysCosUserIrlrsPortGroupNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of assigned dot1dBridge port groups present in this
|
|
agent. This number also reflects the port groups with a
|
|
default system setup indicated by a zero(0) index."
|
|
::= { etsysCosUserIrlrs 5 }
|
|
|
|
etsysCosUserIrlrsPortGroupLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosUserIrlrsPortTypeTable was last
|
|
modified."
|
|
::= { etsysCosUserIrlrs 6 }
|
|
|
|
etsysCosUserIrlrsPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserIrlrsPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the settings for specific types of
|
|
dot1dBridge ports and their matching user rate limiting(or shaping)
|
|
configurations."
|
|
::= { etsysCosUserIrlrs 7 }
|
|
|
|
etsysCosUserIrlrsPortGroupEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserIrlrsPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserIrlrsPortTypeTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosUserIrlrsPortGroupIndex,
|
|
etsysCosUserIrlrsPortTypeIndex }
|
|
::= { etsysCosUserIrlrsPortGroupTable 1 }
|
|
|
|
EtsysCosUserIrlrsPortGroupEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserIrlrsPortGroupIndex
|
|
Integer32,
|
|
etsysCosUserIrlrsPortGroupRowStatus
|
|
RowStatus,
|
|
etsysCosUserIrlrsPortGroupList
|
|
PortList,
|
|
etsysCosUserIrlrsPortGroupName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysCosUserIrlrsPortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user-specified port group for which the settings are
|
|
defined. This value MAY have meaning to the user for the
|
|
purposes of identifying groups of dot1dBridge ports with
|
|
similar function (uplink, user, etc).
|
|
|
|
A value of zero(0) has special meaning in that it identifies
|
|
the default port grouping of characteristics present in the
|
|
agent. Entries indexed by a zero have a max-access of
|
|
read-only. This value will have a system defined maximum of
|
|
etsysCosUserIrlrsPortGroupMaxEntries."
|
|
::= { etsysCosUserIrlrsPortGroupEntry 1 }
|
|
|
|
etsysCosUserIrlrsPortGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosUserIrlrsPortGroupTable.
|
|
Entries within this table MUST be considered non-volatile
|
|
and MUST be maintained across entity resets.
|
|
|
|
When this object's value is active(1) the specified dot1dBridge
|
|
ports listed in the PortGroupList shall be removed from
|
|
UnselectedPorts.
|
|
|
|
A row in transition to the active(1) state will have its
|
|
port group list validated before activation. A port list that
|
|
cannot be made active MUST result in the row state to become
|
|
notReady(3) and no configuration action will be taken for this
|
|
row. Rows not in the active(1) state SHALL NOT be persisted
|
|
across entity resets and MUST return the ports from its
|
|
port group list to the etsysCosUserIrlrsPortTypeUnselectedPorts.
|
|
|
|
When this object's value is set to destroy(6) from an active(1)
|
|
state, all dot1dBridge ports contained in
|
|
etsysCosUserIrlrsPortGroupList shall be returned to the
|
|
etsysCosUserIrlrsPortTypeUnselectedPorts and all entries
|
|
referencing this row shall be removed as well."
|
|
|
|
::= { etsysCosUserIrlrsPortGroupEntry 2 }
|
|
|
|
etsysCosUserIrlrsPortGroupList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports to be assigned to this group.
|
|
Ports in this list MUST :
|
|
o Be mutually exclusive from other entries in this table
|
|
o Be comprised of the same port type as defined by the
|
|
etsysCosUserIrlrsPortTypeIndex."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosUserIrlrsPortGroupEntry 3 }
|
|
|
|
etsysCosUserIrlrsPortGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned textual description of this
|
|
port group."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosUserIrlrsPortGroupEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrsResourceTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserIrlrsResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserIrlrsResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user rate limiting(or shaping) configurations
|
|
to be used in the entries specified."
|
|
::= { etsysCosUserIrlrs 8 }
|
|
|
|
etsysCosUserIrlrsResourceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserIrlrsResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserIrlrsResourceTable. These entries contain the
|
|
specific attributes of policing rates (traffic clipping or shaping)
|
|
and parent rate limiter (or shaper). Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosUserIrlrsPortGroupIndex,
|
|
etsysCosUserIrlrsPortTypeIndex,
|
|
etsysCosUserIrlrsResourceUserIrlrsNum }
|
|
::= { etsysCosUserIrlrsResourceTable 1 }
|
|
|
|
EtsysCosUserIrlrsResourceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserIrlrsResourceUserIrlrsNum
|
|
Unsigned32,
|
|
etsysCosUserIrlrsResourceUnits
|
|
EtsysCosRateTypes,
|
|
etsysCosUserIrlrsResourceRate
|
|
Integer32,
|
|
etsysCosUserIrlrsResourceParentUserIrlrs
|
|
Integer32,
|
|
etsysCosUserIrlrsResourceType
|
|
EtsysRateLimitingType,
|
|
etsysCosUserIrlrsResourceActionCosIndex
|
|
Integer32,
|
|
etsysCosUserIrlrsResourceAction
|
|
EtsysViolationAction,
|
|
etsysCosUserIrlrsResourceViolationPortList
|
|
PortList,
|
|
etsysCosUserIrlrsResourceClearCounters
|
|
TruthValue,
|
|
etsysCosUserIrlrsResourceMode
|
|
EtsysCosRlModes
|
|
}
|
|
|
|
etsysCosUserIrlrsResourceUserIrlrsNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user rate limiter(or shaper) number associated with this entry."
|
|
::= { etsysCosUserIrlrsResourceEntry 1 }
|
|
|
|
etsysCosUserIrlrsResourceUnits OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the unit size for the etsysCosUserIrlrsPortRate.
|
|
Values MUST NOT exceed the capacity of the
|
|
etsysCosUserIrlrsPortType they are associated with."
|
|
DEFVAL {{ pps }}
|
|
::= { etsysCosUserIrlrsResourceEntry 2 }
|
|
|
|
etsysCosUserIrlrsResourceRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the number of units above which packets will
|
|
considered in violation. This object is read-only for
|
|
limiters(or shapers) of type count(5). The value (0)
|
|
shall carry special meaning in this case of unset.
|
|
Rate Limiters(or Shapers) identified as having a value of (0)
|
|
shall not have this settings applied to the limiter(or shaper)."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosUserIrlrsResourceEntry 3 }
|
|
|
|
etsysCosUserIrlrsResourceParentUserIrlrs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to a positive value indicates the
|
|
etsysCosUserIrlrsResourceUserIrlrsNum to be used in
|
|
conjunction with this setting. A value of (-1) indicates the
|
|
parent UserRlRs is not configured."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosUserIrlrsResourceEntry 4 }
|
|
|
|
etsysCosUserIrlrsResourceType OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitingType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The characteristics applied to this rate limiter(or shaper).
|
|
When chaining is used, the AND / OR attribute denotes the
|
|
limiter(or shaper) logic in handling violation. For example,
|
|
option rePrioritizeAnd(2) requires that the current limiter AND
|
|
it's parent be violated for the packet to be reprioritized. The
|
|
rePrioritizeOr(3) option only needs one OR the other to be
|
|
violated for the action to be taken."
|
|
::= { etsysCosUserIrlrsResourceEntry 5 }
|
|
|
|
etsysCosUserIrlrsResourceActionCosIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the CoS to be applied to packets
|
|
in violation of the limits set when the
|
|
etsysCosUserIrlrsResourceType is set to one of the
|
|
rePrioritize types."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosUserIrlrsResourceEntry 6 }
|
|
|
|
etsysCosUserIrlrsResourceAction OBJECT-TYPE
|
|
SYNTAX EtsysViolationAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows syslog, SNMP traps, or disabling actions
|
|
to be taken when limiters (shapers) are first exceeded."
|
|
::= { etsysCosUserIrlrsResourceEntry 7 }
|
|
|
|
etsysCosUserIrlrsResourceViolationPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge ports this limiter(or shaper) has been violated on.
|
|
Writing this object will clear the dot1dBridge ports given
|
|
which have a corresponding bit of zero (0) in the PortList."
|
|
::= { etsysCosUserIrlrsResourceEntry 8 }
|
|
|
|
etsysCosUserIrlrsResourceClearCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shall always read false(2). When set to true(1)
|
|
this object clears the counter associated with this entry, if
|
|
the associated entry is a limiter(or shaper) of type count(5)."
|
|
::= { etsysCosUserIrlrsResourceEntry 9 }
|
|
|
|
etsysCosUserIrlrsResourceMode OBJECT-TYPE
|
|
SYNTAX EtsysCosRlModes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the type of limiter or shaper that this
|
|
object is currently configured to."
|
|
::= { etsysCosUserIrlrsResourceEntry 10 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrsReferenceMappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserIrlrsReferenceMappingMaxReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of etsysCosUserIrlrsReferences allowed in the
|
|
etsysCosUserIrlrsMappingTable."
|
|
::= { etsysCosUserIrlrs 9 }
|
|
|
|
etsysCosUserIrlrsReferenceMappingLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosUserIrlrsReferenceMappingTable was
|
|
last modified."
|
|
::= { etsysCosUserIrlrs 10 }
|
|
|
|
etsysCosUserIrlrsReferenceMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserIrlrsReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user defined mappings of the
|
|
user rate limiter(or shaper) refences found in the etsysCosTable to
|
|
actual user rate limiters(or shapers) associated with the specified
|
|
port-group."
|
|
::= { etsysCosUserIrlrs 11 }
|
|
|
|
etsysCosUserIrlrsReferenceMappingEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserIrlrsReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserIrlrsReferenceMappingTable. Entries within this table
|
|
MUST be considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosUserIrlrsPortGroupIndex,
|
|
etsysCosUserIrlrsPortTypeIndex,
|
|
etsysCosUserIrlrsReference }
|
|
::= { etsysCosUserIrlrsReferenceMappingTable 1 }
|
|
|
|
EtsysCosUserIrlrsReferenceMap ::=
|
|
SEQUENCE {
|
|
etsysCosUserIrlrsResourceUserIrlrsNumber
|
|
Integer32
|
|
}
|
|
|
|
etsysCosUserIrlrsResourceUserIrlrsNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user rate limiter(or shaper) bound to this reference."
|
|
::= { etsysCosUserIrlrsReferenceMappingEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserIrlrsViolationTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserIrlrsViolationClearTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object SHALL always read false. Setting this object to
|
|
true removes all existing entries from the
|
|
etsysCosUserIrlrsViolationTable."
|
|
::= { etsysCosUserIrlrs 12 }
|
|
|
|
etsysCosUserIrlrsViolationLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosUserIrlrsViolationTable was last
|
|
modified."
|
|
::= { etsysCosUserIrlrs 13 }
|
|
|
|
etsysCosUserIrlrsViolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserIrlrsViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the list of entries of all users as classified by
|
|
etsysPolicyRules that have detected violations of the
|
|
limiters(or shapers) current settings."
|
|
::= { etsysCosUserIrlrs 15 }
|
|
|
|
etsysCosUserIrlrsViolationEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserIrlrsViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserIrlrsViolationTable."
|
|
INDEX { etsysPolicyRuleType, etsysPolicyRuleData,
|
|
etsysPolicyRulePrefixBits, etsysPolicyRulePortType,
|
|
etsysPolicyRulePort, etsysCosUserIrlrsResourceUserIrlrsNumber
|
|
}
|
|
::= { etsysCosUserIrlrsViolationTable 1 }
|
|
|
|
EtsysCosUserIrlrsViolationEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserIrlrsViolation
|
|
TruthValue,
|
|
etsysCosUserIrlrsCounter
|
|
Counter64,
|
|
etsysCosUserIrlrsResetFlags
|
|
EtsysRateLimitResetBits
|
|
}
|
|
|
|
etsysCosUserIrlrsViolation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the violation status for this
|
|
limiter(or shaper). If this object reads true(1) the action
|
|
associated with this UserIrlrs have been taken."
|
|
::= { etsysCosUserIrlrsViolationEntry 5 }
|
|
|
|
etsysCosUserIrlrsCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In order for this object to have meaningful information the
|
|
assigned limiter must be set up as a counter type limiter.
|
|
This value shall then represent the number of configured units
|
|
the limiter has recorded. If the associated limiter
|
|
is of type pps(0) then the object represents the packets
|
|
counted, otherwise it represents the octets counted."
|
|
::= { etsysCosUserIrlrsViolationEntry 6 }
|
|
|
|
etsysCosUserIrlrsResetFlags OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitResetBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value shall always read as 0. This object clears the
|
|
statistics gathering portion of this entry. If bit 0 is set,
|
|
the etsysCosUserIrlrsViolation TruthValue will be reset to false. If
|
|
bit 1 is set, the etsysCosUserIrlrsUnitCounter will be reset to zero.
|
|
Both bits set shall clear both properties."
|
|
::= { etsysCosUserIrlrsViolationEntry 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrs group
|
|
-- -------------------------------------------------------------
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrsPortTypeTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserOrlrsPortTypeMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual number of distinctly unique (as defined by
|
|
the set of shared user rate limiting/shaping (UserRlRs)
|
|
capabilities) port types available for configuration on
|
|
this agent."
|
|
::= { etsysCosUserOrlrs 1 }
|
|
|
|
etsysCosUserOrlrsPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserOrlrsPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table defining the distinctly unique UserRlRs
|
|
characteristics of a group of ports."
|
|
::= { etsysCosUserOrlrs 2 }
|
|
|
|
etsysCosUserOrlrsPortTypeEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserOrlrsPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserOrlrsPortTypeTable."
|
|
INDEX { etsysCosUserOrlrsPortTypeIndex }
|
|
::= { etsysCosUserOrlrsPortTypeTable 1 }
|
|
|
|
EtsysCosUserOrlrsPortTypeEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserOrlrsPortTypeIndex
|
|
Integer32,
|
|
etsysCosUserOrlrsPortTypeDescr
|
|
SnmpAdminString,
|
|
etsysCosUserOrlrsPortTypeEligiblePorts
|
|
PortList,
|
|
etsysCosUserOrlrsPortTypeUnselectedPorts
|
|
PortList,
|
|
etsysCosUserOrlrsPortTypeNumberOfUserRlRss
|
|
Integer32,
|
|
etsysCosUserOrlrsPortTypeSupportedRateTypes
|
|
EtsysCosRateTypes,
|
|
etsysCosUserOrlrsPortTypeCapabilities
|
|
EtsysCosRlCapabilities,
|
|
etsysCosUserOrlrsPortTypeModes
|
|
EtsysCosUserModeCapabilities
|
|
}
|
|
|
|
etsysCosUserOrlrsPortTypeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type associated with the unique set of ports sharing
|
|
these capabilities."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 1 }
|
|
|
|
etsysCosUserOrlrsPortTypeDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual description that represents this set of dot1dBridge
|
|
ports."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 2 }
|
|
|
|
etsysCosUserOrlrsPortTypeEligiblePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports belonging (having the same
|
|
capabilities) to this port type."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 3 }
|
|
|
|
etsysCosUserOrlrsPortTypeUnselectedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports not yet bound to a user
|
|
created row (port group) in the etsysCosUserOrlrsPortGroupTable."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 4 }
|
|
|
|
etsysCosUserOrlrsPortTypeNumberOfUserRlRss OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of user rate limiters(or shapers) supported by
|
|
this agent on this type of port."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 5 }
|
|
|
|
etsysCosUserOrlrsPortTypeSupportedRateTypes OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate types available on this type of port."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 6 }
|
|
|
|
etsysCosUserOrlrsPortTypeCapabilities OBJECT-TYPE
|
|
SYNTAX EtsysCosRlCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosRlCapabilities available on this type of port."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 7 }
|
|
|
|
etsysCosUserOrlrsPortTypeModes OBJECT-TYPE
|
|
SYNTAX EtsysCosUserModeCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EtsysCosUserModeCapabilities available on this type of port."
|
|
::= { etsysCosUserOrlrsPortTypeEntry 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrsUnitTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserOrlrsUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserOrlrsUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the rate type, minimum and maximum limits
|
|
of the port groups and their respective granularity."
|
|
::= { etsysCosUserOrlrs 3 }
|
|
|
|
etsysCosUserOrlrsUnitEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserOrlrsUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserOrlrsUnitTable. Entries in this table indicate the port
|
|
group boundaries for the type of port specified."
|
|
INDEX { etsysCosUserOrlrsPortTypeIndex,
|
|
etsysCosUserOrlrsUnitTypeIndex }
|
|
::= { etsysCosUserOrlrsUnitTable 1 }
|
|
|
|
EtsysCosUserOrlrsUnitEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserOrlrsUnitTypeIndex
|
|
EtsysCosRateTypes,
|
|
etsysCosUserOrlrsUnitMaxRate
|
|
Unsigned32,
|
|
etsysCosUserOrlrsUnitMinRate
|
|
Unsigned32,
|
|
etsysCosUserOrlrsUnitGranularity
|
|
Unsigned32
|
|
}
|
|
|
|
etsysCosUserOrlrsUnitTypeIndex OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit identifier for this port type. The metric at which
|
|
the etsysCosUserOrlrsUnitMinRate,
|
|
etsysCosUserOrlrsUnitMaxRate and
|
|
etsysCosUserOrlrsUnitGranularity are applied."
|
|
::= { etsysCosUserOrlrsUnitEntry 1 }
|
|
|
|
etsysCosUserOrlrsUnitMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum rate supported at the rate of units specified by
|
|
etsysCosUserOrlrsUnitType."
|
|
::= { etsysCosUserOrlrsUnitEntry 2 }
|
|
|
|
etsysCosUserOrlrsUnitMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate supported at the rate of units specified by
|
|
etsysCosUserOrlrsUnitType."
|
|
::= { etsysCosUserOrlrsUnitEntry 3 }
|
|
|
|
etsysCosUserOrlrsUnitGranularity OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest unit by which a rate can be modified."
|
|
::= { etsysCosUserOrlrsUnitEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrsPortGroupTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserOrlrsPortGroupMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of port groups supported by this agent."
|
|
::= { etsysCosUserOrlrs 4 }
|
|
|
|
etsysCosUserOrlrsPortGroupNumEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of assigned dot1dBridge port groups present in this
|
|
agent. This number also reflects the port groups with a
|
|
default system setup indicated by a zero(0) index."
|
|
::= { etsysCosUserOrlrs 5 }
|
|
|
|
etsysCosUserOrlrsPortGroupLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosUserOrlrsPortTypeTable was last
|
|
modified."
|
|
::= { etsysCosUserOrlrs 6 }
|
|
|
|
etsysCosUserOrlrsPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserOrlrsPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the settings for specific types of
|
|
dot1dBridge ports and their matching user rate limiting(or shaping)
|
|
configurations."
|
|
::= { etsysCosUserOrlrs 7 }
|
|
|
|
etsysCosUserOrlrsPortGroupEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserOrlrsPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserOrlrsPortTypeTable. Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosUserOrlrsPortGroupIndex,
|
|
etsysCosUserOrlrsPortTypeIndex }
|
|
::= { etsysCosUserOrlrsPortGroupTable 1 }
|
|
|
|
EtsysCosUserOrlrsPortGroupEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserOrlrsPortGroupIndex
|
|
Integer32,
|
|
etsysCosUserOrlrsPortGroupRowStatus
|
|
RowStatus,
|
|
etsysCosUserOrlrsPortGroupList
|
|
PortList,
|
|
etsysCosUserOrlrsPortGroupName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysCosUserOrlrsPortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user-specified port group for which the settings are
|
|
defined. This value MAY have meaning to the user for the
|
|
purposes of identifying groups of dot1dBridge ports with
|
|
similar function (uplink, user, etc).
|
|
|
|
A value of zero(0) has special meaning in that it identifies
|
|
the default port grouping of characteristics present in the
|
|
agent. Entries indexed by a zero have a max-access of
|
|
read-only. This value will have a system defined maximum of
|
|
etsysCosUserOrlrsPortGroupMaxEntries."
|
|
::= { etsysCosUserOrlrsPortGroupEntry 1 }
|
|
|
|
etsysCosUserOrlrsPortGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows for the dynamic creation and deletion
|
|
of entries within the etsysCosUserOrlrsPortGroupTable.
|
|
Entries within this table MUST be considered non-volatile
|
|
and MUST be maintained across entity resets.
|
|
|
|
When this object's value is active(1) the specified dot1dBridge
|
|
ports listed in the PortGroupList shall be removed from
|
|
UnselectedPorts.
|
|
|
|
A row in transition to the active(1) state will have its
|
|
port group list validated before activation. A port list that
|
|
cannot be made active MUST result in the row state to become
|
|
notReady(3) and no configuration action will be taken for this
|
|
row. Rows not in the active(1) state SHALL NOT be persisted
|
|
across entity resets and MUST return the ports from its
|
|
port group list to the etsysCosUserOrlrsPortTypeUnselectedPorts.
|
|
|
|
When this object's value is set to destroy(6) from an active(1)
|
|
state, all dot1dBridge ports contained in
|
|
etsysCosUserOrlrsPortGroupList shall be returned to the
|
|
etsysCosUserOrlrsPortTypeUnselectedPorts and all entries
|
|
referencing this row shall be removed as well."
|
|
|
|
::= { etsysCosUserOrlrsPortGroupEntry 2 }
|
|
|
|
etsysCosUserOrlrsPortGroupList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of dot1dBridge ports to be assigned to this group.
|
|
Ports in this list MUST :
|
|
o Be mutually exclusive from other entries in this table
|
|
o Be comprised of the same port type as defined by the
|
|
etsysCosUserOrlrsPortTypeIndex."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosUserOrlrsPortGroupEntry 3 }
|
|
|
|
etsysCosUserOrlrsPortGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned textual description of this
|
|
port group."
|
|
DEFVAL { ''H } -- the empty string
|
|
::= { etsysCosUserOrlrsPortGroupEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrsResourceTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserOrlrsResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserOrlrsResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user rate limiting(or shaping) configurations
|
|
to be used in the entries specified."
|
|
::= { etsysCosUserOrlrs 8 }
|
|
|
|
etsysCosUserOrlrsResourceEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserOrlrsResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserOrlrsResourceTable. These entries contain the
|
|
specific attributes of policing rates (traffic clipping or shaping)
|
|
and parent rate limiter (or shaper). Entries within this table MUST be
|
|
considered non-volatile and MUST be maintained across entity
|
|
resets."
|
|
INDEX { etsysCosUserOrlrsPortGroupIndex,
|
|
etsysCosUserOrlrsPortTypeIndex,
|
|
etsysCosUserOrlrsResourceUserOrlrsNum }
|
|
::= { etsysCosUserOrlrsResourceTable 1 }
|
|
|
|
EtsysCosUserOrlrsResourceEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserOrlrsResourceUserOrlrsNum
|
|
Unsigned32,
|
|
etsysCosUserOrlrsResourceUnits
|
|
EtsysCosRateTypes,
|
|
etsysCosUserOrlrsResourceRate
|
|
Integer32,
|
|
etsysCosUserOrlrsResourceParentUserOrlrs
|
|
Integer32,
|
|
etsysCosUserOrlrsResourceType
|
|
EtsysRateLimitingType,
|
|
etsysCosUserOrlrsResourceActionCosIndex
|
|
Integer32,
|
|
etsysCosUserOrlrsResourceAction
|
|
EtsysViolationAction,
|
|
etsysCosUserOrlrsResourceViolationPortList
|
|
PortList,
|
|
etsysCosUserOrlrsResourceClearCounters
|
|
TruthValue,
|
|
etsysCosUserOrlrsResourceMode
|
|
EtsysCosRlModes
|
|
}
|
|
|
|
etsysCosUserOrlrsResourceUserOrlrsNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user rate limiter(or shaper) number associated with this entry."
|
|
::= { etsysCosUserOrlrsResourceEntry 1 }
|
|
|
|
etsysCosUserOrlrsResourceUnits OBJECT-TYPE
|
|
SYNTAX EtsysCosRateTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the unit size for the etsysCosUserOrlrsPortRate.
|
|
Values MUST NOT exceed the capacity of the
|
|
etsysCosUserOrlrsPortType they are associated with."
|
|
DEFVAL {{ pps }}
|
|
::= { etsysCosUserOrlrsResourceEntry 2 }
|
|
|
|
etsysCosUserOrlrsResourceRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the number of units above which packets will
|
|
considered in violation. This object is read-only for
|
|
limiters(or shapers) of type count(5). The value (0)
|
|
shall carry special meaning in this case of unset.
|
|
Rate Limiters(or Shapers) identified as having a value of (0)
|
|
shall not have this settings applied to the limiter(or shaper)."
|
|
DEFVAL { 0 }
|
|
::= { etsysCosUserOrlrsResourceEntry 3 }
|
|
|
|
etsysCosUserOrlrsResourceParentUserOrlrs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to a positive value indicates the
|
|
etsysCosUserOrlrsResourceUserOrlrsNum to be used in
|
|
conjunction with this setting. A value of (-1) indicates the
|
|
parent UserRlRs is not configured."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosUserOrlrsResourceEntry 4 }
|
|
|
|
etsysCosUserOrlrsResourceType OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitingType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The characteristics applied to this rate limiter(or shaper).
|
|
When chaining is used, the AND / OR attribute denotes the
|
|
limiter(or shaper) logic in handling violation. For example,
|
|
option rePrioritizeAnd(2) requires that the current limiter AND
|
|
it's parent be violated for the packet to be reprioritized. The
|
|
rePrioritizeOr(3) option only needs one OR the other to be
|
|
violated for the action to be taken."
|
|
::= { etsysCosUserOrlrsResourceEntry 5 }
|
|
|
|
etsysCosUserOrlrsResourceActionCosIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the CoS to be applied to packets
|
|
in violation of the limits set when the
|
|
etsysCosUserOrlrsResourceType is set to one of the
|
|
rePrioritize types."
|
|
DEFVAL { -1 }
|
|
::= { etsysCosUserOrlrsResourceEntry 6 }
|
|
|
|
etsysCosUserOrlrsResourceAction OBJECT-TYPE
|
|
SYNTAX EtsysViolationAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows syslog, SNMP traps, or disabling actions
|
|
to be taken when limiters (shapers) are first exceeded."
|
|
::= { etsysCosUserOrlrsResourceEntry 7 }
|
|
|
|
etsysCosUserOrlrsResourceViolationPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dot1dBridge ports this limiter(or shaper) has been violated on.
|
|
Writing this object will clear the dot1dBridge ports given
|
|
which have a corresponding bit of zero (0) in the PortList."
|
|
::= { etsysCosUserOrlrsResourceEntry 8 }
|
|
|
|
etsysCosUserOrlrsResourceClearCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shall always read false(2). When set to true(1)
|
|
this object clears the counter associated with this entry, if
|
|
the associated entry is a limiter(or shaper) of type count(5)."
|
|
::= { etsysCosUserOrlrsResourceEntry 9 }
|
|
|
|
etsysCosUserOrlrsResourceMode OBJECT-TYPE
|
|
SYNTAX EtsysCosRlModes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will represent the type of limiter or shaper that this
|
|
object is currently configured to."
|
|
::= { etsysCosUserOrlrsResourceEntry 10 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrsReferenceMappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserOrlrsReferenceMappingMaxReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of etsysCosUserOrlrsReferences allowed in the
|
|
etsysCosUserOrlrsMappingTable."
|
|
::= { etsysCosUserOrlrs 9 }
|
|
|
|
etsysCosUserOrlrsReferenceMappingLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosUserOrlrsReferenceMappingTable was
|
|
last modified."
|
|
::= { etsysCosUserOrlrs 10 }
|
|
|
|
etsysCosUserOrlrsReferenceMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserOrlrsReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the user defined mappings of the
|
|
user rate limiter(or shaper) refences found in the etsysCosTable to
|
|
actual user rate limiters(or shapers) associated with the specified
|
|
port-group."
|
|
::= { etsysCosUserOrlrs 11 }
|
|
|
|
etsysCosUserOrlrsReferenceMappingEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserOrlrsReferenceMap
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserOrlrsReferenceMappingTable. Entries within this table
|
|
MUST be considered non-volatile and MUST be maintained across
|
|
entity resets."
|
|
INDEX { etsysCosUserOrlrsPortGroupIndex,
|
|
etsysCosUserOrlrsPortTypeIndex,
|
|
etsysCosUserOrlrsReference }
|
|
::= { etsysCosUserOrlrsReferenceMappingTable 1 }
|
|
|
|
EtsysCosUserOrlrsReferenceMap ::=
|
|
SEQUENCE {
|
|
etsysCosUserOrlrsResourceUserOrlrsNumber
|
|
Integer32
|
|
}
|
|
|
|
etsysCosUserOrlrsResourceUserOrlrsNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (-1|0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user rate limiter(or shaper) bound to this reference."
|
|
::= { etsysCosUserOrlrsReferenceMappingEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- etsysCosUserOrlrsViolationTable
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosUserOrlrsViolationClearTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object SHALL always read false. Setting this object to
|
|
true removes all existing entries from the
|
|
etsysCosUserOrlrsViolationTable."
|
|
::= { etsysCosUserOrlrs 12 }
|
|
|
|
etsysCosUserOrlrsViolationLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the etsysCosUserOrlrsViolationTable was last
|
|
modified."
|
|
::= { etsysCosUserOrlrs 13 }
|
|
|
|
etsysCosUserOrlrsViolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysCosUserOrlrsViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the list of entries of all users as classified by
|
|
etsysPolicyRules that have detected violations of the
|
|
limiters(or shapers) current settings."
|
|
::= { etsysCosUserOrlrs 15 }
|
|
|
|
etsysCosUserOrlrsViolationEntry OBJECT-TYPE
|
|
SYNTAX EtsysCosUserOrlrsViolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conceptually defines a particular entry within the
|
|
etsysCosUserOrlrsViolationTable."
|
|
INDEX { etsysPolicyRuleType, etsysPolicyRuleData,
|
|
etsysPolicyRulePrefixBits, etsysPolicyRulePortType,
|
|
etsysPolicyRulePort, etsysCosUserIrlrsResourceUserIrlrsNumber
|
|
}
|
|
::= { etsysCosUserOrlrsViolationTable 1 }
|
|
|
|
EtsysCosUserOrlrsViolationEntry ::=
|
|
SEQUENCE {
|
|
etsysCosUserOrlrsViolation
|
|
TruthValue,
|
|
etsysCosUserOrlrsCounter
|
|
Counter64,
|
|
etsysCosUserOrlrsResetFlags
|
|
EtsysRateLimitResetBits
|
|
}
|
|
|
|
etsysCosUserOrlrsViolation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the violation status for this
|
|
limiter(or shaper). If this object reads true(1) the action
|
|
associated with this UserOrlrs have been taken."
|
|
::= { etsysCosUserOrlrsViolationEntry 5 }
|
|
|
|
etsysCosUserOrlrsCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In order for this object to have meaningful information the
|
|
assigned limiter must be set up as a counter type limiter.
|
|
This value shall then represent the number of configured units
|
|
the limiter has recorded. If the associated limiter
|
|
is of type pps(0) then the object represents the packets
|
|
counted, otherwise it represents the octets counted."
|
|
::= { etsysCosUserOrlrsViolationEntry 6 }
|
|
|
|
etsysCosUserOrlrsResetFlags OBJECT-TYPE
|
|
SYNTAX EtsysRateLimitResetBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value shall always read as 0. This object clears the
|
|
statistics gathering portion of this entry. If bit 0 is set,
|
|
the etsysCosUserOrlrsViolation TruthValue will be reset to false. If
|
|
bit 1 is set, the etsysCosUserOrlrsUnitCounter will be reset to zero.
|
|
Both bits set shall clear both properties."
|
|
::= { etsysCosUserOrlrsViolationEntry 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Notifications
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosIrlExceededNotification NOTIFICATION-TYPE
|
|
OBJECTS { ifName, etsysCosIrlViolation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates an inbound limiter has been
|
|
exceeded."
|
|
::= { etsysCosNotifications 1 }
|
|
|
|
etsysCosOrlExceededNotification NOTIFICATION-TYPE
|
|
OBJECTS { ifName, etsysCosOrlViolation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates an outbound limiter has been
|
|
exceeded."
|
|
::= { etsysCosNotifications 2 }
|
|
|
|
etsysCosFloodLimitExceededNotification NOTIFICATION-TYPE
|
|
OBJECTS { ifName, etsysCosFloodCtrlViolation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates an inbound flood limiter has been
|
|
exceeded."
|
|
::= { etsysCosNotifications 3 }
|
|
|
|
etsysCosUserIrlrsLimitExceededNotification NOTIFICATION-TYPE
|
|
OBJECTS { ifName, etsysCosUserIrlrsViolation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates an inbound user rate limiter/shaper
|
|
has been exceeded."
|
|
::= { etsysCosNotifications 4 }
|
|
|
|
etsysCosUserOrlrsLimitExceededNotification NOTIFICATION-TYPE
|
|
OBJECTS { ifName, etsysCosUserOrlrsViolation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates an outbound user rate limiter/shaper
|
|
has been exceeded."
|
|
::= { etsysCosNotifications 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosConformance OBJECT IDENTIFIER ::= { etsysCosMIB 2 }
|
|
|
|
etsysCosGroups OBJECT IDENTIFIER
|
|
::= { etsysCosConformance 1 }
|
|
|
|
etsysCosCompliances OBJECT IDENTIFIER
|
|
::= { etsysCosConformance 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of Conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosMasterResetGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosMibObjectAnullingBehavior
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing a mechanism of resetting
|
|
all objects back to an unconfigured state."
|
|
::= { etsysCosGroups 1 }
|
|
|
|
etsysCosCapabilitiesGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosCapability
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the capability extent for
|
|
the agent supporting this MIB."
|
|
::= { etsysCosGroups 2 }
|
|
|
|
etsysCosGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosMaxEntries,
|
|
etsysCosNumEntries,
|
|
etsysCosLastChange,
|
|
etsysCosEnableState,
|
|
etsysCosRowStatus,
|
|
etsysCos8021dPriority,
|
|
etsysCosTosValue,
|
|
etsysCosTxqReference,
|
|
etsysCosIrlReference,
|
|
etsysCosOrlReference,
|
|
etsysCosDropPrecedence,
|
|
etsysCosUserIrlrsReference,
|
|
etsysCosUserOrlrsReference
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the support capacity and
|
|
capability extent for the agent supporting this MIB. The
|
|
object etsysCosDropPrecedence is part of a required
|
|
group however its access may be restricted to read-only for
|
|
agents without the ability to support this feature and still
|
|
wish to implement this MIB."
|
|
::= { etsysCosGroups 3 }
|
|
|
|
etsysCosTxqGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosTxqReference,
|
|
etsysCosTxqNumPortTypes,
|
|
etsysCosTxqPortTypeDescr,
|
|
etsysCosTxqPortTypeEligiblePorts,
|
|
etsysCosTxqPortTypeUnselectedPorts,
|
|
etsysCosTxqPortTypeNumberOfQueues,
|
|
etsysCosTxqPortTypeSupportedRateTypes,
|
|
etsysCosTxqPortTypeNumberOfSlices,
|
|
etsysCosTxqPortTypeQueueAlgorithms,
|
|
etsysCosTxqPortTypeQueueArbiterModes,
|
|
etsysCosTxqPortTypeMaxDropPrecedence,
|
|
etsysCosTxqPortTypeLLQEligibleQueues,
|
|
etsysCosTxqUnitMaxRate,
|
|
etsysCosTxqUnitMinRate,
|
|
etsysCosTxqUnitGranularity,
|
|
etsysCosTxqMaxPortGroups,
|
|
etsysCosTxqNumPortGroups,
|
|
etsysCosTxqPortGroupLastChange,
|
|
etsysCosTxqPortGroupRowStatus,
|
|
etsysCosTxqPortGroupList,
|
|
etsysCosTxqPortGroupName,
|
|
etsysCosTxqPortArbMode,
|
|
etsysCosTxqPortSliceSetting,
|
|
etsysCosTxqPortEnhancedTransMaxGroups,
|
|
etsysCosTxqPortEnhancedTransGroupId,
|
|
etsysCosTxqPortEnhancedTransBandwidth,
|
|
etsysCosTxqPortEnhancedTransGroupToDcbxTC,
|
|
etsysCosTxqPortEnhancedTransPriorityToDcbxTC,
|
|
etsysCosTxqPortQUnit,
|
|
etsysCosTxqPortQRate,
|
|
etsysCosTxqPortQAlgorithm,
|
|
etsysCosTxqPortQLLQenable,
|
|
etsysCosTxqReferenceMappingMaxReference,
|
|
etsysCosTxqResourceQueueNumber,
|
|
etsysCosTxqDropProfilesMaxEntries,
|
|
etsysCosTxqDropProfilesNumEntries,
|
|
etsysCosTxqDropProfilesLastChange,
|
|
etsysCosTxqDropProfilesRowStatus,
|
|
etsysCosTxqDropProfilesMin,
|
|
etsysCosTxqDropProfilesMax,
|
|
etsysCosTxqDropProfilesMaxDropProb,
|
|
etsysCosTxqDropProfilesQueueDepthAtMaxProb,
|
|
etsysCosTxqDropProfileQueueCfgID
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects required for creating and modifying
|
|
settings for transmit queue configurations."
|
|
::= { etsysCosGroups 4 }
|
|
|
|
etsysCosIrlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosIrlReference,
|
|
etsysCosIrlPortTypeMaxEntries,
|
|
etsysCosIrlPortTypeDescr,
|
|
etsysCosIrlPortTypeEligiblePorts,
|
|
etsysCosIrlPortTypeUnselectedPorts,
|
|
etsysCosIrlPortTypeNumberOfIRLs,
|
|
etsysCosIrlPortTypeCapabilities,
|
|
etsysCosIrlPortTypeSupportedRateTypes,
|
|
etsysCosIrlUnitMaxRate,
|
|
etsysCosIrlUnitMinRate,
|
|
etsysCosIrlUnitGranularity,
|
|
etsysCosIrlPortGroupMaxEntries,
|
|
etsysCosIrlPortGroupNumEntries,
|
|
etsysCosIrlPortGroupLastChange,
|
|
etsysCosIrlPortGroupRowStatus,
|
|
etsysCosIrlPortGroupList,
|
|
etsysCosIrlPortGroupName,
|
|
etsysCosIrlPortCfgFloodLimiter,
|
|
etsysCosIrlResourceIrlNumber,
|
|
etsysCosIrlResourceUnits,
|
|
etsysCosIrlResourceRate,
|
|
etsysCosIrlResourceParentIrl,
|
|
etsysCosIrlResourceActionCosIndex,
|
|
etsysCosIrlResourceType,
|
|
etsysCosIrlResourceAction,
|
|
etsysCosIrlResourceViolationPortList,
|
|
etsysCosIrlResourceClearCounters,
|
|
etsysCosIrlReferenceMappingMaxReference,
|
|
etsysCosIrlReferenceMappingLastChange,
|
|
etsysCosIrlViolationLastChange,
|
|
etsysCosIrlDisabledPortsList,
|
|
etsysCosIrlViolation,
|
|
etsysCosIrlViolationClearTable,
|
|
etsysCosIrlCounter,
|
|
etsysCosIrlResetFlags
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for creating and modifying
|
|
settings for inbound rate limiter configurations."
|
|
::= { etsysCosGroups 5 }
|
|
|
|
etsysCosOrlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosOrlReference,
|
|
etsysCosOrlPortTypeMaxEntries,
|
|
etsysCosOrlPortTypeDescr,
|
|
etsysCosOrlPortTypeEligiblePorts,
|
|
etsysCosOrlPortTypeUnselectedPorts,
|
|
etsysCosOrlPortTypeNumberOfORLs,
|
|
etsysCosOrlPortTypeCapabilities,
|
|
etsysCosOrlPortTypeSupportedRateTypes,
|
|
etsysCosOrlUnitMaxRate,
|
|
etsysCosOrlUnitMinRate,
|
|
etsysCosOrlUnitGranularity,
|
|
etsysCosOrlPortGroupMaxEntries,
|
|
etsysCosOrlPortGroupNumEntries,
|
|
etsysCosOrlPortGroupLastChange,
|
|
etsysCosOrlPortGroupRowStatus,
|
|
etsysCosOrlPortGroupList,
|
|
etsysCosOrlPortGroupName,
|
|
etsysCosOrlPortCfgFloodLimiter,
|
|
etsysCosOrlResourceOrlNumber,
|
|
etsysCosOrlResourceUnits,
|
|
etsysCosOrlResourceRate,
|
|
etsysCosOrlResourceParentOrl,
|
|
etsysCosOrlResourceActionCosIndex,
|
|
etsysCosOrlResourceType,
|
|
etsysCosOrlResourceAction,
|
|
etsysCosOrlResourceViolationPortList,
|
|
etsysCosOrlResourceClearCounters,
|
|
etsysCosOrlReferenceMappingMaxReference,
|
|
etsysCosOrlReferenceMappingLastChange,
|
|
etsysCosOrlViolationLastChange,
|
|
etsysCosOrlDisabledPortsList,
|
|
etsysCosOrlViolation,
|
|
etsysCosOrlViolationClearTable,
|
|
etsysCosOrlCounter,
|
|
etsysCosOrlResetFlags
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for creating and modifying
|
|
settings for outbound rate limiter configurations."
|
|
::= { etsysCosGroups 6 }
|
|
|
|
etsysCosNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysCosIrlExceededNotification,
|
|
etsysCosOrlExceededNotification
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects required for reporting rate limiter
|
|
violations."
|
|
::= { etsysCosGroups 7 }
|
|
|
|
|
|
etsysCosUserIrlrsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosUserIrlrsReference,
|
|
etsysCosUserIrlrsPortTypeMaxEntries,
|
|
etsysCosUserIrlrsPortTypeDescr,
|
|
etsysCosUserIrlrsPortTypeEligiblePorts,
|
|
etsysCosUserIrlrsPortTypeUnselectedPorts,
|
|
etsysCosUserIrlrsPortTypeNumberOfUserRlRss,
|
|
etsysCosUserIrlrsPortTypeCapabilities,
|
|
etsysCosUserIrlrsPortTypeModes,
|
|
etsysCosUserIrlrsPortTypeSupportedRateTypes,
|
|
etsysCosUserIrlrsUnitMaxRate,
|
|
etsysCosUserIrlrsUnitMinRate,
|
|
etsysCosUserIrlrsUnitGranularity,
|
|
etsysCosUserIrlrsPortGroupMaxEntries,
|
|
etsysCosUserIrlrsPortGroupNumEntries,
|
|
etsysCosUserIrlrsPortGroupLastChange,
|
|
etsysCosUserIrlrsPortGroupRowStatus,
|
|
etsysCosUserIrlrsPortGroupList,
|
|
etsysCosUserIrlrsPortGroupName,
|
|
etsysCosUserIrlrsResourceUserIrlrsNumber,
|
|
etsysCosUserIrlrsResourceUnits,
|
|
etsysCosUserIrlrsResourceRate,
|
|
etsysCosUserIrlrsResourceParentUserIrlrs,
|
|
etsysCosUserIrlrsResourceActionCosIndex,
|
|
etsysCosUserIrlrsResourceType,
|
|
etsysCosUserIrlrsResourceAction,
|
|
etsysCosUserIrlrsResourceViolationPortList,
|
|
etsysCosUserIrlrsResourceClearCounters,
|
|
etsysCosUserIrlrsResourceMode,
|
|
etsysCosUserIrlrsReferenceMappingMaxReference,
|
|
etsysCosUserIrlrsReferenceMappingLastChange,
|
|
etsysCosUserIrlrsViolationLastChange,
|
|
etsysCosUserIrlrsViolation,
|
|
etsysCosUserIrlrsViolationClearTable,
|
|
etsysCosUserIrlrsCounter,
|
|
etsysCosUserIrlrsResetFlags
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for creating and modifying
|
|
settings for inbound user rate limiter configurations."
|
|
::= { etsysCosGroups 8 }
|
|
|
|
etsysCosUserOrlrsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosUserOrlrsReference,
|
|
etsysCosUserOrlrsPortTypeMaxEntries,
|
|
etsysCosUserOrlrsPortTypeDescr,
|
|
etsysCosUserOrlrsPortTypeEligiblePorts,
|
|
etsysCosUserOrlrsPortTypeUnselectedPorts,
|
|
etsysCosUserOrlrsPortTypeNumberOfUserRlRss,
|
|
etsysCosUserOrlrsPortTypeCapabilities,
|
|
etsysCosUserOrlrsPortTypeModes,
|
|
etsysCosUserOrlrsPortTypeSupportedRateTypes,
|
|
etsysCosUserOrlrsUnitMaxRate,
|
|
etsysCosUserOrlrsUnitMinRate,
|
|
etsysCosUserOrlrsUnitGranularity,
|
|
etsysCosUserOrlrsPortGroupMaxEntries,
|
|
etsysCosUserOrlrsPortGroupNumEntries,
|
|
etsysCosUserOrlrsPortGroupLastChange,
|
|
etsysCosUserOrlrsPortGroupRowStatus,
|
|
etsysCosUserOrlrsPortGroupList,
|
|
etsysCosUserOrlrsPortGroupName,
|
|
etsysCosUserOrlrsResourceUserOrlrsNumber,
|
|
etsysCosUserOrlrsResourceUnits,
|
|
etsysCosUserOrlrsResourceRate,
|
|
etsysCosUserOrlrsResourceParentUserOrlrs,
|
|
etsysCosUserOrlrsResourceActionCosIndex,
|
|
etsysCosUserOrlrsResourceType,
|
|
etsysCosUserOrlrsResourceAction,
|
|
etsysCosUserOrlrsResourceViolationPortList,
|
|
etsysCosUserOrlrsResourceClearCounters,
|
|
etsysCosUserOrlrsResourceMode,
|
|
etsysCosUserOrlrsReferenceMappingMaxReference,
|
|
etsysCosUserOrlrsReferenceMappingLastChange,
|
|
etsysCosUserOrlrsViolationLastChange,
|
|
etsysCosUserOrlrsViolation,
|
|
etsysCosUserOrlrsViolationClearTable,
|
|
etsysCosUserOrlrsCounter,
|
|
etsysCosUserOrlrsResetFlags
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for creating and modifying
|
|
settings for outbound user rate limiter configurations."
|
|
::= { etsysCosGroups 9 }
|
|
|
|
etsysCosNotificationGroup2 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysCosIrlExceededNotification,
|
|
etsysCosOrlExceededNotification,
|
|
etsysCosFloodLimitExceededNotification,
|
|
etsysCosUserIrlrsLimitExceededNotification,
|
|
etsysCosUserOrlrsLimitExceededNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for reporting rate limiter
|
|
violations."
|
|
::= { etsysCosGroups 10 }
|
|
|
|
etsysCosTxqGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysCosTxqReference,
|
|
etsysCosTxqNumPortTypes,
|
|
etsysCosTxqPortTypeDescr,
|
|
etsysCosTxqPortTypeEligiblePorts,
|
|
etsysCosTxqPortTypeUnselectedPorts,
|
|
etsysCosTxqPortTypeNumberOfQueues,
|
|
etsysCosTxqPortTypeSupportedRateTypes,
|
|
etsysCosTxqPortTypeNumberOfSlices,
|
|
etsysCosTxqPortTypeQueueAlgorithms,
|
|
etsysCosTxqPortTypeQueueArbiterModes,
|
|
etsysCosTxqPortTypeMaxDropPrecedence,
|
|
etsysCosTxqPortTypeLLQEligibleQueues,
|
|
etsysCosTxqUnitMaxRate,
|
|
etsysCosTxqUnitMinRate,
|
|
etsysCosTxqUnitGranularity,
|
|
etsysCosTxqMaxPortGroups,
|
|
etsysCosTxqNumPortGroups,
|
|
etsysCosTxqPortGroupLastChange,
|
|
etsysCosTxqPortGroupRowStatus,
|
|
etsysCosTxqPortGroupList,
|
|
etsysCosTxqPortGroupName,
|
|
etsysCosTxqPortArbMode,
|
|
etsysCosTxqPortSliceSetting,
|
|
etsysCosTxqPortEnhancedTransMaxGroups,
|
|
etsysCosTxqPortEnhancedTransGroupId,
|
|
etsysCosTxqPortEnhancedTransBandwidth,
|
|
etsysCosTxqPortEnhancedTransGroupToDcbxTC,
|
|
etsysCosTxqPortEnhancedTransPriorityToDcbxTC,
|
|
etsysCosTxqPortQUnit,
|
|
etsysCosTxqPortQRate,
|
|
etsysCosTxqPortQAlgorithm,
|
|
etsysCosTxqPortQLLQenable,
|
|
etsysCosTxqPortQMinRate,
|
|
etsysCosTxqReferenceMappingMaxReference,
|
|
etsysCosTxqResourceQueueNumber,
|
|
etsysCosTxqDropProfilesMaxEntries,
|
|
etsysCosTxqDropProfilesNumEntries,
|
|
etsysCosTxqDropProfilesLastChange,
|
|
etsysCosTxqDropProfilesRowStatus,
|
|
etsysCosTxqDropProfilesMin,
|
|
etsysCosTxqDropProfilesMax,
|
|
etsysCosTxqDropProfilesMaxDropProb,
|
|
etsysCosTxqDropProfilesQueueDepthAtMaxProb,
|
|
etsysCosTxqDropProfileQueueCfgID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for creating and modifying
|
|
settings for transmit queue configurations."
|
|
::= { etsysCosGroups 11 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysCosCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support Enterasys
|
|
class of service."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etsysCosMasterResetGroup,
|
|
etsysCosCapabilitiesGroup,
|
|
etsysCosGroup
|
|
}
|
|
GROUP etsysCosTxqGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
associated with the CTRON-TX-QUEUE-ARBITRATION-MIB."
|
|
GROUP etsysCosIrlGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for inbound rate limiting."
|
|
GROUP etsysCosOrlGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for outbound rate limiting."
|
|
GROUP etsysCosNotificationGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for rate limiting and the ability to send traps."
|
|
::= { etsysCosCompliances 1 }
|
|
|
|
etsysCosCompliance2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support Enterasys
|
|
class of service."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etsysCosMasterResetGroup,
|
|
etsysCosCapabilitiesGroup,
|
|
etsysCosGroup
|
|
}
|
|
GROUP etsysCosTxqGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
associated with the CTRON-TX-QUEUE-ARBITRATION-MIB."
|
|
GROUP etsysCosIrlGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for inbound rate limiting."
|
|
GROUP etsysCosOrlGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for outbound rate limiting."
|
|
GROUP etsysCosNotificationGroup2
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for rate limiting and the ability to send traps."
|
|
GROUP etsysCosUserIrlrsGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for inbound user rate limiting/shaping."
|
|
GROUP etsysCosUserOrlrsGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for outbound user rate limiting/shaping."
|
|
::= { etsysCosCompliances 2 }
|
|
|
|
etsysCosCompliance3 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support Extreme
|
|
Networks class of service."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etsysCosMasterResetGroup,
|
|
etsysCosCapabilitiesGroup,
|
|
etsysCosGroup
|
|
}
|
|
GROUP etsysCosTxqGroup2
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
associated with the CTRON-TX-QUEUE-ARBITRATION-MIB."
|
|
GROUP etsysCosIrlGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for inbound rate limiting."
|
|
GROUP etsysCosOrlGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for outbound rate limiting."
|
|
GROUP etsysCosNotificationGroup2
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for rate limiting and the ability to send traps."
|
|
GROUP etsysCosUserIrlrsGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for inbound user rate limiting/shaping."
|
|
GROUP etsysCosUserOrlrsGroup
|
|
DESCRIPTION
|
|
"An optional group for products that support the abilities
|
|
for outbound user rate limiting/shaping."
|
|
::= { etsysCosCompliances 3 }
|
|
|
|
END
|