Observium_CE/mibs/eltex/ELTEX-MES-ISS-ACL-MIB

704 lines
24 KiB
Plaintext

ELTEX-MES-ISS-ACL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32
FROM SNMPv2-SMI
OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus, TEXTUAL-CONVENTION, MacAddress, TruthValue, DisplayString
FROM SNMPv2-TC
eltMesIss
FROM ELTEX-MES-ISS-MIB
issL2FilterEntry, issL3FilterEntry
FROM ARICENT-ISS-MIB
issAclRateCtrlEntry
FROM ARICENT-ISS-ACL-MIB
ifIndex
FROM IF-MIB;
eltMesIssAclMIB MODULE-IDENTITY
LAST-UPDATED "202302070000Z"
ORGANIZATION "Eltex Enterprise, Ltd."
CONTACT-INFO
"eltex-co.ru"
DESCRIPTION
"Access Control Lists MIB definitions."
REVISION "202209010000Z"
DESCRIPTION "Added eltMesIssAclNotifications object."
REVISION "201811130000Z"
DESCRIPTION "Initial revision."
::= { eltMesIss 1 }
-- ------------------------------------------------------------------------- --
-- groups in the MIB
-- ------------------------------------------------------------------------- --
eltMesIssAclL2Filter OBJECT IDENTIFIER ::= { eltMesIssAclMIB 1 }
eltMesIssAclL3Filter OBJECT IDENTIFIER ::= { eltMesIssAclMIB 2 }
eltMesIssAclUserDefinedFilter OBJECT IDENTIFIER ::= { eltMesIssAclMIB 3 }
eltMesIssAclRateControl OBJECT IDENTIFIER ::= { eltMesIssAclMIB 4 }
eltMesIssAclGenFilter OBJECT IDENTIFIER ::= { eltMesIssAclMIB 5 }
eltMesIssAclNotifications OBJECT IDENTIFIER ::= { eltMesIssAclMIB 6 }
-- ------------------------------------------------------------------------- --
-- Textual Conventions
-- ------------------------------------------------------------------------- --
EltMesIssAclRateCtrlActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Action type."
SYNTAX INTEGER {
none(1),
trap(2),
shutdown(3),
trapAndShutdown(4)
}
EltMesIssAclStormCauseType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Storm cause type."
SYNTAX INTEGER {
unicast(1),
broadcast(2),
multicast(3)
}
EltMesIssAclInterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Interface type."
SYNTAX INTEGER {
vlan (1)
}
EltMesIssAclFilterType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ACL Filter type."
SYNTAX INTEGER {
aclL2Filter (1),
aclL3Filter (2)
}
EltMesIssAclFilterDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ACL direction."
SYNTAX INTEGER {
input (1)
}
-- ------------------------------------------------------------------------- --
-- L2 ACL Filters
-- ------------------------------------------------------------------------- --
eltMesIssAclL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF EltMesIssAclL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the issL2FilterTable table."
::= { eltMesIssAclL2Filter 1 }
eltMesIssAclL2FilterEntry OBJECT-TYPE
SYNTAX EltMesIssAclL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number. An entry in this
table will be created when the L2 Filter entry (issL2FilterStatus)
in the fsissext.mib is created."
AUGMENTS { issL2FilterEntry }
::= { eltMesIssAclL2FilterTable 1 }
EltMesIssAclL2FilterEntry ::=
SEQUENCE {
eltMesIssAclL2FilterDstMacAddrMask
MacAddress,
eltMesIssAclL2FilterSrcMacAddrMask
MacAddress,
eltMesIssAclL2FilterUserDefinedBytesValue
OCTET STRING,
eltMesIssAclL2FilterUserDefinedBytesMask
OCTET STRING,
eltMesIssAclL2FilterDesc
DisplayString
}
eltMesIssAclL2FilterDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mask for the packet's destination MAC address.
Only masked bits will be used to filter a packet by the destination
MAC address. By default, all bits are masked, i.e. the whole address
will be compared with a filter."
DEFVAL { 'FFFFFFFFFFFF'H }
::= { eltMesIssAclL2FilterEntry 1 }
eltMesIssAclL2FilterSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mask for the packet's source MAC address.
Only masked bits will be used to filter a packet by the source
MAC address. By default, all bits are masked, i.e. the whole address
will be compared with a filter."
DEFVAL { 'FFFFFFFFFFFF'H }
::= { eltMesIssAclL2FilterEntry 2 }
eltMesIssAclL2FilterUserDefinedBytesValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the values of bytes in a filtered packet which are located
by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable.
Each two bytes in this field refers to a single
eltMesIssAclUdbOffsetConfigEntry."
::= { eltMesIssAclL2FilterEntry 3 }
eltMesIssAclL2FilterUserDefinedBytesMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mask for bytes in a filtered packet which are located
by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable.
Each two bytes in this field refers to a single
eltMesIssAclUdbOffsetConfigEntry."
::= { eltMesIssAclL2FilterEntry 4 }
eltMesIssAclL2FilterDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A user defined textual string which contains ACL description."
DEFVAL { "" }
::= { eltMesIssAclL2FilterEntry 5 }
-- ------------------------------------------------------------------------- --
-- L3 ACL Filters
-- ------------------------------------------------------------------------- --
eltMesIssAclL3FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF EltMesIssAclL3FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the issL3FilterTable table."
::= { eltMesIssAclL3Filter 1 }
eltMesIssAclL3FilterEntry OBJECT-TYPE
SYNTAX EltMesIssAclL3FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L3 filter rule.
Index to the table is the L3 filter number. An entry in this
table will be created when the L3 Filter entry (issL3FilterStatus)
in the fsissext.mib is created."
AUGMENTS { issL3FilterEntry }
::= { eltMesIssAclL3FilterTable 1 }
EltMesIssAclL3FilterEntry ::=
SEQUENCE {
eltMesIssAclL3FilterUserDefinedBytesValue
OCTET STRING,
eltMesIssAclL3FilterUserDefinedBytesMask
OCTET STRING,
eltMesIssAclL3FilterTrafficClass
Integer32,
eltMesIssAclL3FilterDesc
DisplayString
}
eltMesIssAclL3FilterUserDefinedBytesValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the values of bytes in a filtered packet which are located
by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable.
Each two bytes in this field refers to a single
eltMesIssAclUdbOffsetConfigEntry."
::= { eltMesIssAclL3FilterEntry 1 }
eltMesIssAclL3FilterUserDefinedBytesMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mask for bytes in a filtered packet which are located
by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable.
Each two bytes in this field refers to a single
eltMesIssAclUdbOffsetConfigEntry."
::= { eltMesIssAclL3FilterEntry 2 }
eltMesIssAclL3FilterTrafficClass OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Traffic Class value to be checked against the packet.
This value covers both DSCP and ECN fields.
A value of '-1' means the Traffic Class field becomes dont care."
DEFVAL { -1 }
::= { eltMesIssAclL3FilterEntry 3 }
eltMesIssAclL3FilterDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A user defined textual string which contains ACL description."
DEFVAL { "" }
::= { eltMesIssAclL3FilterEntry 4 }
-- ------------------------------------------------------------------------- --
-- User defined ACL Filters
-- ------------------------------------------------------------------------- --
eltMesIssAclUdbOffsetConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EltMesIssAclUdbOffsetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows to configure user-defined bytes for ACL."
::= { eltMesIssAclUserDefinedFilter 1 }
eltMesIssAclUdbOffsetConfigEntry OBJECT-TYPE
SYNTAX EltMesIssAclUdbOffsetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in eltMesIssAclUdbOffsetConfigTable."
INDEX { eltMesIssAclUdbOffsetIndex }
::= { eltMesIssAclUdbOffsetConfigTable 1 }
EltMesIssAclUdbOffsetConfigEntry ::=
SEQUENCE {
eltMesIssAclUdbOffsetIndex
Integer32,
eltMesIssAclUdbOffsetType
INTEGER,
eltMesIssAclUdbOffsetByte
Integer32
}
eltMesIssAclUdbOffsetIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The numerical index of offset value."
::= { eltMesIssAclUdbOffsetConfigEntry 1 }
eltMesIssAclUdbOffsetType OBJECT-TYPE
SYNTAX INTEGER {
destMacAddress (1),
layer2FramePayload (2),
layer3HeaderOrArp (3),
layer4Header (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The starting position in a packet the offset will be counted from."
DEFVAL { destMacAddress }
::= { eltMesIssAclUdbOffsetConfigEntry 2 }
eltMesIssAclUdbOffsetByte OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The offset value in bytes."
DEFVAL { 0 }
::= { eltMesIssAclUdbOffsetConfigEntry 3 }
-- ------------------------------------------------------------------------- --
-- Rate Control Group
-- ------------------------------------------------------------------------- --
eltMesIssAclRateCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EltMesIssAclRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the issAclRateCtrlTable table."
::= { eltMesIssAclRateControl 1 }
eltMesIssAclRateCtrlEntry OBJECT-TYPE
SYNTAX EltMesIssAclRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
AUGMENTS { issAclRateCtrlEntry }
::= { eltMesIssAclRateCtrlTable 1 }
EltMesIssAclRateCtrlEntry ::=
SEQUENCE {
eltMesIssAclRateCtrlDlfLimitKbpsValue Integer32,
eltMesIssAclRateCtrlBcastLimitKbpsValue Integer32,
eltMesIssAclRateCtrlMcastLimitKbpsValue Integer32,
eltMesIssAclRateCtrlDlfLimitPpsValue Integer32,
eltMesIssAclRateCtrlBcastLimitPpsValue Integer32,
eltMesIssAclRateCtrlMcastLimitPpsValue Integer32,
eltMesIssAclRateCtrlIgrBandwidth Integer32,
eltMesIssAclRateCtrlDlfLimitAction EltMesIssAclRateCtrlActionType,
eltMesIssAclRateCtrlBcastLimitAction EltMesIssAclRateCtrlActionType,
eltMesIssAclRateCtrlMcastLimitAction EltMesIssAclRateCtrlActionType
}
eltMesIssAclRateCtrlDlfLimitKbpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf kilobits that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting for
Destination lookup failure kilobits on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 1 }
eltMesIssAclRateCtrlBcastLimitKbpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast kilobits that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Broadcast kilobits on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 2 }
eltMesIssAclRateCtrlMcastLimitKbpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast kilobits that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Multicast kilobits on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 3 }
eltMesIssAclRateCtrlDlfLimitPpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf packets that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting for
Destination lookup failure packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 4 }
eltMesIssAclRateCtrlBcastLimitPpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Broadcast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 5 }
eltMesIssAclRateCtrlMcastLimitPpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 6 }
eltMesIssAclRateCtrlIgrBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the interface ingress bandwidth measured in Kbit per
second. All ingress traffic that exceeds the configured rate
will be dropped.
Rate limiting will be performed with granularity of 16 Kbps.
A value of 0 disables rate limiting i.e. sets the port
to the full speed."
DEFVAL { 0 }
::= { eltMesIssAclRateCtrlEntry 7 }
eltMesIssAclRateCtrlDlfLimitAction OBJECT-TYPE
SYNTAX EltMesIssAclRateCtrlActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken if configured limiting
value (in pps or kbps) is exceeded for dlf packets."
DEFVAL { none }
::= { eltMesIssAclRateCtrlEntry 8 }
eltMesIssAclRateCtrlBcastLimitAction OBJECT-TYPE
SYNTAX EltMesIssAclRateCtrlActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken if configured limiting
value (in pps or kbps) is exceeded for broadcast packets."
DEFVAL { none }
::= { eltMesIssAclRateCtrlEntry 9 }
eltMesIssAclRateCtrlMcastLimitAction OBJECT-TYPE
SYNTAX EltMesIssAclRateCtrlActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken if configured limiting
value (in pps or kbps) is exceeded for multicast packets."
DEFVAL { none }
::= { eltMesIssAclRateCtrlEntry 10 }
eltMesIssAclRateCtrlConfiguredUnits OBJECT-TYPE
SYNTAX INTEGER {
pps(1),
kbps(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { pps }
::= { eltMesIssAclRateControl 2 }
eltMesIssStormCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EltMesIssStormCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the rate limiting parameters and the storm type
for each physical and port-channel interface in the switch."
::= { eltMesIssAclRateControl 3 }
eltMesIssStormCtrlEntry OBJECT-TYPE
SYNTAX EltMesIssStormCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in eltMesIssStormCtrlTable."
INDEX { ifIndex, eltMesIssAclStormCtrlType }
::= { eltMesIssStormCtrlTable 1 }
EltMesIssStormCtrlEntry ::=
SEQUENCE {
eltMesIssAclStormCtrlType EltMesIssAclStormCauseType,
eltMesIssAclStormDetected TruthValue,
eltMesIssAclStormPortAction EltMesIssAclRateCtrlActionType,
eltMesIssAclStormPortLimitKbpsValue Integer32,
eltMesIssAclStormPortLimitPpsValue Integer32
}
eltMesIssAclStormCtrlType OBJECT-TYPE
SYNTAX EltMesIssAclStormCauseType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The storm type."
::= { eltMesIssStormCtrlEntry 1 }
eltMesIssAclStormDetected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detected/Cleared storm on the interface."
::= { eltMesIssStormCtrlEntry 2 }
eltMesIssAclStormPortAction OBJECT-TYPE
SYNTAX EltMesIssAclRateCtrlActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken if configured limiting
value (in pps or kbps) is exceeded for packets.
This field is functionally the same as
eltMesIssAclRateCtrlDlfLimitAction,
eltMesIssAclRateCtrlBcastLimitAction or
eltMesIssAclRateCtrlMcastLimitAction
from eltMesIssAclRateCtrlTableTable."
DEFVAL { none }
::= { eltMesIssStormCtrlEntry 3 }
eltMesIssAclStormPortLimitKbpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting value for the maximum number of kilobits
that can be transmitted per second over this interface.
The zero value of this object means disable rate limiting
on this interface.
This field is functionally the same as
eltMesIssAclRateCtrlDlfLimitKbpsValue,
eltMesIssAclRateCtrlBcastLimitKbpsValue or
eltMesIssAclRateCtrlMcastLimitKbpsValue
from eltMesIssAclRateCtrlTableTable."
DEFVAL { 0 }
::= { eltMesIssStormCtrlEntry 4 }
eltMesIssAclStormPortLimitPpsValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting value for the maximum number of packets
that can be transmitted per second over this interface.
The zero value of this object means disable rate limiting
on this interface.
This field is functionally the same as
eltMesIssAclRateCtrlDlfLimitPpsValue,
eltMesIssAclRateCtrlBcastLimitPpsValue or
eltMesIssAclRateCtrlMcastLimitPpsValue
from eltMesIssAclRateCtrlTableTable."
DEFVAL { 0 }
::= { eltMesIssStormCtrlEntry 5 }
-- ------------------------------------------------------------------------- --
-- Generic ACL Filter Group
-- ------------------------------------------------------------------------- --
eltMesIssAclIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF EltMesIssAclIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains bindings of ACL filters to interfaces."
::= { eltMesIssAclGenFilter 1 }
eltMesIssAclIfEntry OBJECT-TYPE
SYNTAX EltMesIssAclIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the binding of ACL filter
to a specific interface."
INDEX { eltMesIssAclIfType,
eltMesIssAclIfIndex,
eltMesIssAclFilterDirection,
eltMesIssAclFilterType,
eltMesIssAclFilterIndex }
::= { eltMesIssAclIfTable 1 }
EltMesIssAclIfEntry ::=
SEQUENCE {
eltMesIssAclIfType EltMesIssAclInterfaceType,
eltMesIssAclIfIndex Integer32,
eltMesIssAclFilterDirection EltMesIssAclFilterDirection,
eltMesIssAclFilterType EltMesIssAclFilterType,
eltMesIssAclFilterIndex Integer32,
eltMesIssAclIfRowStatus RowStatus
}
eltMesIssAclIfType OBJECT-TYPE
SYNTAX EltMesIssAclInterfaceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface type."
::= { eltMesIssAclIfEntry 1 }
eltMesIssAclIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { eltMesIssAclIfEntry 2 }
eltMesIssAclFilterDirection OBJECT-TYPE
SYNTAX EltMesIssAclFilterDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filter direction."
::= { eltMesIssAclIfEntry 3 }
eltMesIssAclFilterType OBJECT-TYPE
SYNTAX EltMesIssAclFilterType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filter type."
::= { eltMesIssAclIfEntry 4 }
eltMesIssAclFilterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filter index."
::= { eltMesIssAclIfEntry 5 }
eltMesIssAclIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { eltMesIssAclIfEntry 6 }
-- ------------------------------------------------------------------------- --
-- Generic ACL notifications
-- ------------------------------------------------------------------------- --
eltMesIssAclNotificationsPrefix OBJECT IDENTIFIER
::= { eltMesIssAclNotifications 0 }
eltMesIssAclStormControlTrap NOTIFICATION-TYPE
OBJECTS {
eltMesIssAclStormDetected,
eltMesIssAclStormPortAction,
eltMesIssAclStormPortLimitKbpsValue,
eltMesIssAclStormPortLimitPpsValue
}
STATUS current
DESCRIPTION
"An eltMesIssAclStormControlTrap is generated when
the storm is occurred on the interface."
::= { eltMesIssAclNotificationsPrefix 1 }
END