3815 lines
157 KiB
Plaintext
3815 lines
157 KiB
Plaintext
ELTEX-BGP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Integer32,
|
|
Counter32,
|
|
Gauge32,
|
|
Unsigned32,
|
|
IpAddress
|
|
FROM SNMPv2-SMI
|
|
|
|
TEXTUAL-CONVENTION,
|
|
DisplayString,
|
|
TruthValue,
|
|
RowStatus,
|
|
TimeStamp,
|
|
TimeInterval
|
|
FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
InetAddressType,
|
|
InetAddress,
|
|
InetPortNumber,
|
|
InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB
|
|
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
|
|
eltexLtd
|
|
FROM ELTEX-SMI-ACTUAL;
|
|
|
|
eltexBgpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201709040000Z" -- Mon Sep 04 00:00:00 GMT 2017
|
|
ORGANIZATION "Eltex Enterprise Co, Ltd."
|
|
CONTACT-INFO
|
|
"www.eltex.nsk.ru"
|
|
DESCRIPTION
|
|
"The MIB module for management of the BGP protocol."
|
|
|
|
::= { eltexLtd 45 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- Textual Conventions.
|
|
|
|
EltexBgpIdentifier ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The representation of a BGP Identifier. Could be any 32-bit
|
|
number in a form of 4-octet IPv4 address."
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
|
|
EltexBgpAfi ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The representation of a BGP AFI (Address Family Identifier)"
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
ipv4(1),
|
|
ipv6(2),
|
|
l2vpn(25)
|
|
}
|
|
|
|
EltexBgpSafi ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The representation of a BGP SAFI (Sub-Address Family Identifier)"
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
unicast(1),
|
|
multicast(2),
|
|
both(3),
|
|
labeled(4),
|
|
vpls(65),
|
|
evpn(70),
|
|
mplsBgpVpn(128),
|
|
private(241)
|
|
}
|
|
|
|
EltexBgpAutonomousSystemNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "An autonomous System Number. If <AsSize> is
|
|
two-octet, the range is 0..65535. If it is
|
|
four-octet, it is the full range of Unsigned32."
|
|
SYNTAX Unsigned32
|
|
|
|
EltexBgpAsSize ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The size of the AS number."
|
|
SYNTAX INTEGER {
|
|
twoOctet(1),
|
|
fourOctet(2)
|
|
}
|
|
|
|
EltexBgpAdminStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The desired administrative state of an entry."
|
|
SYNTAX INTEGER {
|
|
adminStatusUp(1),
|
|
adminStatusDown(2)
|
|
}
|
|
|
|
EltexBgpOperStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of an entity."
|
|
SYNTAX INTEGER {
|
|
operStatusUp(1), -- active
|
|
operStatusDown(2), -- inactive
|
|
operStatusGoingUp(3), -- activating
|
|
operStatusGoingDown(4), -- deactivating
|
|
operStatusActFailed(5) -- activation failed
|
|
}
|
|
|
|
EltexBgpOriginCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "A BGP origin code."
|
|
SYNTAX INTEGER {
|
|
originIgp(0), -- path interior to originating AS
|
|
originEgp(1), -- path learned via EGP protocol
|
|
originIncomplete(2) -- path was learned by other means
|
|
}
|
|
|
|
EltexBgpConfigDropOrWarn ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Whether to drop a session or just warn a parameter has been
|
|
exceeded."
|
|
SYNTAX INTEGER {
|
|
drop(1), -- the session is dropped
|
|
warn(2) -- a warning is produced
|
|
}
|
|
|
|
EltexBgpPeerOrRib ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Whether an index refers to a BGP Peer Index or a RIB index."
|
|
SYNTAX INTEGER {
|
|
peerIndex(1),
|
|
ribIndex(2)
|
|
}
|
|
|
|
EltexBgpPeerStates ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The current state of a connection to a BGP peer."
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
idle(1),
|
|
connect(2),
|
|
active(3),
|
|
opensent(4),
|
|
openconfirm(5),
|
|
established(6)
|
|
}
|
|
|
|
EltexBgpPeerEvents ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "An event that has occurred to a connection to a BGP peer."
|
|
SYNTAX INTEGER {
|
|
noEvent(0), -- no event has yet occurred
|
|
start(1), -- the connection has been activated
|
|
-- (either outgoing or incoming)
|
|
stop(2), -- the connection has been
|
|
-- deactivated
|
|
transportOpen(3), -- the transport connection has been
|
|
-- opened
|
|
transportClosed(4), -- the transport connection has been
|
|
-- closed
|
|
transportOpenFailed(5), -- an attempt to open the transport
|
|
-- connection has failed
|
|
transportFatalError(6), -- a fatal error has occurred on the
|
|
-- transport connection
|
|
connectRetryTimer(7), -- the ConnectRetry timer has popped
|
|
holdTimer(8), -- the Hold timer has popped
|
|
keepaliverTimer(9), -- the Keepalive timer has popped
|
|
recvOpen(10), -- a BGP Open message has been
|
|
-- received
|
|
recvKeepAlive(11), -- a BGP KeepAlive message has been
|
|
-- received
|
|
recvUpdate(12), -- a BGP Update message has been
|
|
-- received
|
|
recvNotification(13), -- a BGP Notification message has
|
|
-- been received
|
|
connParmsUpdate(14) -- Connection parameters have been
|
|
-- updated
|
|
}
|
|
|
|
EltexBgpCapabilities ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The capabilities advertised by a BGP instance."
|
|
SYNTAX BITS {
|
|
mpIpv4Unicast(0), -- multiprotocol BGP support
|
|
-- for IPv4 unicast routes
|
|
mpIpv4Multicast(1), -- multiprotocol BGP support
|
|
-- for IPv4 multicast routes
|
|
mpIpv4Vpn(2), -- multiprotocol BGP support
|
|
-- for IPv4 VPN routes
|
|
mpIpv4Label(3), -- multiprotocol BGP support
|
|
-- for labeled IPv4 VPN
|
|
-- routes
|
|
mpIpv6Unicast(4), -- multiprotocol BGP support
|
|
-- for IPv6 unicast routes
|
|
mpIpv6Multicast(5), -- multiprotocol BGP support
|
|
-- for IPv6 multicast routes
|
|
mpIpv6Vpn(6), -- multiprotocol BGP support
|
|
-- for IPv6 VPN routes
|
|
mpIpv6Label(7), -- multiprotocol BGP support
|
|
-- for labeled IPv6 VPN
|
|
-- routes
|
|
routeRefresh(8), -- support for Route Refresh
|
|
-- messages
|
|
gracefulRestart(9), -- support for graceful restart
|
|
-- processing
|
|
routeRefreshCisco(10), -- support for pre-standard
|
|
-- (Cisco) Route Refresh
|
|
-- messages
|
|
outboundRouteFilter(11), -- support for Outbound Route
|
|
-- Filtering, for one or more
|
|
-- AFI/SAFI types
|
|
outboundRouteFilterCisco(12), -- support for pre-standard
|
|
-- (Cisco) Outbound Route
|
|
-- Filtering, for one or more
|
|
-- AFI/SAFI types
|
|
fourOctetAs(13), -- support for four-octet AS
|
|
-- numbers
|
|
mpL2vpnVpls(14), -- multiprotocol BGP support
|
|
-- for AFI/SAFI = L2VPN/VPLS
|
|
addPath(15), -- support for additional BGP
|
|
-- paths
|
|
mpL2vpnEvpn(16), -- multiprotocol BGP support
|
|
-- for AFI/SAFI = L2VPN/EVPN
|
|
mpIpv4Private(17), -- multiprotocol BGP support
|
|
-- for AFI/SAFI = IPv4/Private
|
|
enhancedRouteRefresh(18) -- support for enhanced route
|
|
-- refresh (RFC7313)
|
|
}
|
|
|
|
EltexBgpCeaseErrorSubcode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error subcode to be sent in the Cease Notification message."
|
|
SYNTAX INTEGER {
|
|
none(0), -- no subcode is specified.
|
|
adminShutdown(2), -- administrative Shutdown.
|
|
peerUnconfig(3), -- peer De-configured.
|
|
adminReset(4), -- administrative Reset.
|
|
configChange(6), -- other Configuration Change.
|
|
noResource(8) -- out of Resources.
|
|
}
|
|
|
|
EltexBgpNlriIsActiveFlag ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether an NLRI is active in the routing table."
|
|
SYNTAX INTEGER {
|
|
notTracked(1), -- BGP is not tracking active routes
|
|
inactive(2), -- The BGP route is inactive
|
|
active(3) -- The BGP route is active
|
|
}
|
|
|
|
EltexBgpPeerConfigStates ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reports the state of the peer configuration."
|
|
SYNTAX INTEGER {
|
|
stateUpToDate (1), -- Up to date.
|
|
stateOutOfDateAdminDown (2), -- Out of date, requiring the
|
|
-- peer's admin status to be
|
|
-- set to down.
|
|
stateOutOfDateRowInactive (3) -- Out of date, requiring the
|
|
-- peer's row status to be set
|
|
-- to inactive.
|
|
}
|
|
|
|
EltexBgpReasonNotBest ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Reports the reason a route was determined to be not the
|
|
best route to that destination."
|
|
SYNTAX INTEGER {
|
|
notConsidered(0), -- The route has not been considered
|
|
-- for best route
|
|
routeIsBest(1), -- The is the best route
|
|
weight(2), -- The route was beaten by one with a
|
|
-- better weight
|
|
localPref(3), -- The route was beaten by one with a
|
|
-- better local preference
|
|
localOrigPreferred(4), -- The route was beaten by a
|
|
-- locally-originated route
|
|
asPathLen(5), -- The route was beaten by one with a
|
|
-- shorter AS Path
|
|
origin(6), -- The route was beaten by one with a
|
|
-- lower origin code
|
|
med(7), -- The route was beaten by one with a
|
|
-- lower MED
|
|
localOrigTieBreaker(8), -- The route was beaten by another
|
|
-- locally originated route
|
|
ebgpVsibgp(9), -- The IBGP route was beaten by a
|
|
-- route from an external peer
|
|
adminDistance(10), -- The route was beaten by a route
|
|
-- with a lower admin distance
|
|
pathCostToNextHop(11), -- The route was beaten by a route
|
|
-- with a lower path cost to the
|
|
-- next hop.
|
|
prefExisting(12), -- The route was beaten because
|
|
-- existing route was preferred
|
|
identifier(13), -- The route was beaten by a route
|
|
-- with a lower identifier either
|
|
-- ORIGINATOR ID or BGP identifier
|
|
clusterLen(14), -- The route was beaten by a route
|
|
-- with a lower cluster length
|
|
peerType(15), -- The route was beaten by a route
|
|
-- with a preferred peer address
|
|
-- type. IPv6 is preferred to IPv4
|
|
peerAddress(16), -- The route was beaten by a route
|
|
-- with a lower peer address
|
|
peerPort(17), -- The route was beaten by a route
|
|
-- with a lower peer port
|
|
pathId(18) -- The route was beaten by a route
|
|
-- with a lower path id
|
|
}
|
|
|
|
EltexBgpNlriPeerTypes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The type of peer than a route was received from."
|
|
SYNTAX INTEGER {
|
|
none(1), -- The route was not received from a BGP peer.
|
|
iBGP(2), -- The route was received from an iBGP BGP peer.
|
|
eBGP(3) -- The route was received from an eBGP BGP peer.
|
|
}
|
|
|
|
EltexBgpASNotation ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Selecting the AS number notation."
|
|
SYNTAX INTEGER {
|
|
asplainASNumber(1), -- AS_PLAIN notation
|
|
asdotASnumber(2) -- AS_DOT notation
|
|
}
|
|
|
|
EltexBgpPeerReflectorClientType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "What type of client this BGP Peer is. A client of a route
|
|
reflector is a meshed client if and only if it is fully meshed
|
|
with all meshed clients of that route reflector."
|
|
SYNTAX INTEGER {
|
|
nonClient(0),
|
|
client(1),
|
|
meshedClient(2)
|
|
}
|
|
|
|
EltexBgpRouteMapAsPathAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "How to handle setting an AS-Path attribute."
|
|
SYNTAX INTEGER {
|
|
none(0), -- No action is carried out
|
|
set(1) -- The local AS number is prepended to the AS path
|
|
}
|
|
|
|
EltexBgpAddPathSrCap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "BGP additional path send/receive capability."
|
|
SYNTAX INTEGER {
|
|
disable (0), -- disable sending and receiving
|
|
receive (1), -- receive but do not send
|
|
send (2), -- send but do not receive
|
|
both (3), -- send and receive
|
|
inherit (4), -- inherit configuration from
|
|
-- the entity AFI/SAFI level
|
|
unknown (5) -- unknown
|
|
}
|
|
|
|
EltexBfdSessionStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The current BFD session state of a peer."
|
|
SYNTAX INTEGER {
|
|
bfdSessNotRequired(0), -- not required
|
|
bfdSessInitial(1), -- initial
|
|
bfdSessActivating(2), -- activating
|
|
bfdSessActive(3), -- active
|
|
bfdSessInactive(4), -- inactive
|
|
bfdSessAdminDown(5), -- admin down
|
|
bfdSessNoContact(6) -- no contact
|
|
}
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
eltexBgpObjects OBJECT IDENTIFIER ::= { eltexBgpMIB 1 }
|
|
|
|
eltexBgpProcess OBJECT IDENTIFIER ::= { eltexBgpObjects 1 }
|
|
|
|
--
|
|
-- BGP Process Table.
|
|
--
|
|
-- This is the top-level MIB for the BGP Router feature. It controls
|
|
-- creation and global configuration of the protocol.
|
|
--
|
|
|
|
eltexBgpProcessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry in this table represents a single instance of
|
|
BGP Router process. Only some fields in an entry can be
|
|
changed while the admin status is up.
|
|
|
|
The current implementation allows only a single process of
|
|
BGP is configured on the router. The single BGP process
|
|
could be created only with process ID 1."
|
|
::= { eltexBgpProcess 1 }
|
|
|
|
eltexBgpProcessEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry represents a BGP Router entity."
|
|
INDEX { eltexBgpProcessId }
|
|
::= { eltexBgpProcessTable 1 }
|
|
|
|
EltexBgpProcessEntry ::= SEQUENCE {
|
|
eltexBgpProcessId Unsigned32,
|
|
eltexBgpProcessRowStatus RowStatus,
|
|
eltexBgpProcessAdminStatus EltexBgpAdminStatus,
|
|
eltexBgpProcessOperStatus EltexBgpOperStatus,
|
|
eltexBgpProcessLocalAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpProcessLocalIdentifier EltexBgpIdentifier,
|
|
eltexBgpProcessOperLocalIdentifier EltexBgpIdentifier,
|
|
eltexBgpProcessTableVersion Unsigned32,
|
|
eltexBgpProcessASNotation EltexBgpASNotation,
|
|
eltexBgpProcessClusterIdentifier EltexBgpIdentifier,
|
|
eltexBgpProcessOperClusterIdentifier EltexBgpIdentifier,
|
|
eltexBgpProcessInterClientReflEnabled TruthValue,
|
|
eltexBgpProcessPathMtuDiscovery TruthValue
|
|
}
|
|
|
|
eltexBgpProcessId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Identifies a BGP Router entity."
|
|
::= { eltexBgpProcessEntry 1 }
|
|
|
|
eltexBgpProcessRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status for this BGP Process Table entry, used to
|
|
create and destroy table entries."
|
|
::= { eltexBgpProcessEntry 2 }
|
|
|
|
eltexBgpProcessAdminStatus OBJECT-TYPE
|
|
SYNTAX EltexBgpAdminStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administrative status of this BGP Process entity, used to
|
|
activate and deactivate the protocol."
|
|
DEFVAL { adminStatusDown }
|
|
::= { eltexBgpProcessEntry 3 }
|
|
|
|
eltexBgpProcessOperStatus OBJECT-TYPE
|
|
SYNTAX EltexBgpOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational status of this BGP Process entity."
|
|
::= { eltexBgpProcessEntry 4 }
|
|
|
|
eltexBgpProcessLocalAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The local autonomous system number.
|
|
|
|
For a router not in a confederation, it is equivalent to
|
|
the Base Scalar bgpM2LocalAs. For a router in a
|
|
confederation, it is equivalent to the Base Scalar
|
|
bgpM2ConfederationId. If eltexBgpProcessConfederationId
|
|
is not 0, then this router is in a confederation.
|
|
|
|
If the eltexBgpProcessAsSize is twoOctet, then the range is
|
|
constrained to be 0-65535. A non-mappable 4-octet AS
|
|
number should only be used when all BGP speakers within
|
|
the AS support 4-octet AS numbers.
|
|
|
|
This field can only be changed when the Admin Status is
|
|
down."
|
|
::= { eltexBgpProcessEntry 5 }
|
|
|
|
eltexBgpProcessLocalIdentifier OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The BGP Identifier of the local system. This is a generic
|
|
identifier and not necessarily an IP address. This field
|
|
can only be changed when the Admin Status is down.
|
|
It is equivalent to the Base Scalar bgpM2LocalIdentifier.
|
|
|
|
The null value turns on ID election algorithm that chooses
|
|
the highest loopback interface if any, or the highest IP
|
|
interface otherwise."
|
|
DEFVAL { '00000000'H }
|
|
::= { eltexBgpProcessEntry 6 }
|
|
|
|
eltexBgpProcessOperLocalIdentifier OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The BGP Identifier of the local system that is used in the
|
|
present moment. It could be selected by election algorithm
|
|
or configured by user."
|
|
::= { eltexBgpProcessEntry 7 }
|
|
|
|
eltexBgpProcessTableVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table version number of the Loc-RIB. Initialized to 1
|
|
when BGP starts or restarts, and is incremented every time
|
|
the Loc-RIB is recalculated."
|
|
::= { eltexBgpProcessEntry 8 }
|
|
|
|
eltexBgpProcessASNotation OBJECT-TYPE
|
|
SYNTAX EltexBgpASNotation
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The choice between asplain and asdot notation AS numbers."
|
|
DEFVAL { asplainASNumber }
|
|
::= { eltexBgpProcessEntry 9 }
|
|
|
|
eltexBgpProcessClusterIdentifier OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The configured Cluster-ID of the local router.
|
|
A value of 0.0.0.0 indicates the absence of this
|
|
value. This field can only be changed when the Admin
|
|
Status is down. The BGP router will act as a route reflector
|
|
if any peer is configured to be a client. If no cluster ID is
|
|
explicitly configured here, the Router ID will be used."
|
|
DEFVAL { '00000000'H }
|
|
::= { eltexBgpProcessEntry 10 }
|
|
|
|
eltexBgpProcessOperClusterIdentifier OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Cluster-ID that is used in the present moment."
|
|
DEFVAL { '00000000'H }
|
|
::= { eltexBgpProcessEntry 11 }
|
|
|
|
eltexBgpProcessInterClientReflEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes will not be reflected between two peers that are
|
|
configured to be route reflector clients in the
|
|
eltexBgpPeerReflectorClient field if this field takes the value
|
|
FALSE."
|
|
DEFVAL { true }
|
|
::= { eltexBgpProcessEntry 12 }
|
|
|
|
eltexBgpProcessPathMtuDiscovery OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable path MTU discovery on all neighbors"
|
|
DEFVAL { false }
|
|
::= { eltexBgpProcessEntry 13 }
|
|
|
|
--
|
|
-- <AFI, SAFI> supported table
|
|
--
|
|
|
|
eltexBgpProcessAddrFamilyTable OBJECT-TYPE
|
|
-- FAMILY-SHORT-NAME BGP_AFI
|
|
SYNTAX SEQUENCE OF EltexBgpProcessAddrFamilyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of per-<AFI, SAFI> configuration information."
|
|
::= { eltexBgpProcess 2 }
|
|
|
|
eltexBgpProcessAddrFamilyEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpProcessAddrFamilyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information about support for an
|
|
<AFI, SAFI>."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpProcessAddrFamilyAfi,
|
|
eltexBgpProcessAddrFamilySafi }
|
|
::= { eltexBgpProcessAddrFamilyTable 1 }
|
|
|
|
EltexBgpProcessAddrFamilyEntry ::= SEQUENCE {
|
|
eltexBgpProcessAddrFamilyAfi EltexBgpAfi,
|
|
eltexBgpProcessAddrFamilySafi EltexBgpSafi,
|
|
eltexBgpProcessAddrFamilyRowStatus RowStatus
|
|
}
|
|
|
|
eltexBgpProcessAddrFamilyAfi OBJECT-TYPE
|
|
SYNTAX EltexBgpAfi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The AFI index into the <AFI, SAFI> table."
|
|
::= { eltexBgpProcessAddrFamilyEntry 2 }
|
|
|
|
eltexBgpProcessAddrFamilySafi OBJECT-TYPE
|
|
SYNTAX EltexBgpSafi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The SAFI index into the <AFI, SAFI> table."
|
|
::= { eltexBgpProcessAddrFamilyEntry 3 }
|
|
|
|
eltexBgpProcessAddrFamilyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The row status for this <AFI, SAFI> entry, used to
|
|
create and destroy table entries. This field can
|
|
only be set while Process is admin down."
|
|
::= { eltexBgpProcessAddrFamilyEntry 4 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
eltexBgpPeer OBJECT IDENTIFIER ::= { eltexBgpObjects 2 }
|
|
|
|
eltexBgpPeerData OBJECT IDENTIFIER ::= { eltexBgpPeer 1 }
|
|
|
|
--
|
|
-- BGP Peer Data Table.
|
|
--
|
|
-- This table contains all the information required for each peer including
|
|
-- protocol parameters, statistics and policy configuration. A row in this
|
|
-- table is created for each peer the BGP process knows about.
|
|
--
|
|
|
|
eltexBgpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BGP peer configuration table.
|
|
|
|
This table allows a user to configure individual BGP peers.
|
|
|
|
This table is a configuration table - all status, statistics
|
|
and control fields are located in the BGP peer status table
|
|
(eltexBgpPeerStatusTable).
|
|
|
|
This table does not contain entries for dynamic peers."
|
|
::= { eltexBgpPeerData 1 }
|
|
|
|
eltexBgpPeerEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information about the connection with
|
|
a BGP peer."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpPeerRemoteAddrType,
|
|
eltexBgpPeerRemoteAddr }
|
|
::= { eltexBgpPeerTable 1 }
|
|
|
|
EltexBgpPeerEntry ::= SEQUENCE {
|
|
eltexBgpPeerRemoteAddrType InetAddressType,
|
|
eltexBgpPeerRemoteAddr InetAddress,
|
|
eltexBgpPeerRowStatus RowStatus,
|
|
eltexBgpPeerAdminStatus EltexBgpAdminStatus,
|
|
eltexBgpPeerOperStatus EltexBgpOperStatus,
|
|
eltexBgpPeerRemoteAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpPeerSourceInterface InterfaceIndexOrZero,
|
|
eltexBgpPeerNxtHopSlf TruthValue,
|
|
eltexBgpPeerConfigMaxPrfx Unsigned32,
|
|
eltexBgpPeerConfigDropWarn EltexBgpConfigDropOrWarn,
|
|
eltexBgpPeerMaxPrfxHold Unsigned32,
|
|
eltexBgpPeerConfigThreshold Unsigned32,
|
|
eltexBgpPeerConnectRetryInterval Unsigned32,
|
|
eltexBgpPeerHoldTimeConfigd Unsigned32,
|
|
eltexBgpPeerKeepAliveConfigd Unsigned32,
|
|
eltexBgpPeerMinRouteAdvertiseInterval Unsigned32,
|
|
eltexBgpPeerMinASOriginationInterval Unsigned32,
|
|
eltexBgpPeerMinRouteWithdrawInterval Unsigned32,
|
|
eltexBgpPeerConfigOpenDelay Unsigned32,
|
|
eltexBgpPeerConfigIdleHold Unsigned32,
|
|
eltexBgpPeerDistListPlIn DisplayString,
|
|
eltexBgpPeerDistListPlOut DisplayString,
|
|
eltexBgpPeerReflectorClient EltexBgpPeerReflectorClientType,
|
|
eltexBgpPeerSoftResetWithStoredInfo TruthValue,
|
|
eltexBgpPeerConfigPeerGroup DisplayString,
|
|
eltexBgpPeerPathMtuDiscovery TruthValue,
|
|
eltexBgpPeerBfdDesired TruthValue
|
|
}
|
|
|
|
eltexBgpPeerRemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address family of the remote address for the peering
|
|
session."
|
|
::= { eltexBgpPeerEntry 1 }
|
|
|
|
eltexBgpPeerRemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The remote address for the peering session.
|
|
|
|
This is the address of the BGP peer. It must be specified
|
|
so the address length must be non-zero."
|
|
::= { eltexBgpPeerEntry 2 }
|
|
|
|
eltexBgpPeerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status for this BGP peer table entry, used to
|
|
create and destroy table entries."
|
|
::= { eltexBgpPeerEntry 3 }
|
|
|
|
eltexBgpPeerAdminStatus OBJECT-TYPE
|
|
SYNTAX EltexBgpAdminStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired state of the BGP connection.
|
|
|
|
This parameter can be used to restart BGP peer
|
|
connections. Care should be used in providing write
|
|
access to this object without adequate authentication."
|
|
DEFVAL { adminStatusDown }
|
|
::= { eltexBgpPeerEntry 4 }
|
|
|
|
eltexBgpPeerOperStatus OBJECT-TYPE
|
|
SYNTAX EltexBgpOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational status of this peer. This usually
|
|
reflects the desired AdminStatus, but can contain transitional
|
|
values and failures."
|
|
::= { eltexBgpPeerEntry 5 }
|
|
|
|
eltexBgpPeerRemoteAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The remote autonomous system number.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin status DOWN and then UP, thus forcing the
|
|
peer session to be restarted. In this case, until the
|
|
peer is set admin_status DOWN, the peer will be marked as
|
|
out of date (as reported by the config state field in the
|
|
eltexBgpPeerStatusTable row for the peer)."
|
|
::= { eltexBgpPeerEntry 6 }
|
|
|
|
eltexBgpPeerSourceInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interface index for the interface from which the
|
|
source address for session is chosen. If non-zero, BGP
|
|
will look for the first address on this interface with a
|
|
type matching eltexBgpPeerRemoteAddrType, and use that as the
|
|
source address.
|
|
|
|
This field can be changed at any time, causing the peer to
|
|
be immediately deactivated and reactivated.
|
|
|
|
If the configured interface (or address on that interface)
|
|
did not exist when the peer was activated, and is
|
|
subsequently added, the peer will automatically use the
|
|
configured interface address. This will cause the peer to
|
|
be immediately deactivated and reactivated."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerEntry 7 }
|
|
|
|
eltexBgpPeerNxtHopSlf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When eltexBgpPeerNxtHopSlf is 'true', routes will be
|
|
advertised to the peer with NEXT_HOP attribute set to
|
|
BGP router local address."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerEntry 8 }
|
|
|
|
eltexBgpPeerConfigMaxPrfx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to limit the number of prefixes that
|
|
can be accepted from this peer.
|
|
|
|
Setting eltexBgpPeerConfigMaxPrfx to a non-zero value sets
|
|
the maximum number of prefixes that can be accepted from
|
|
this peer."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerEntry 9 }
|
|
|
|
eltexBgpPeerConfigDropWarn OBJECT-TYPE
|
|
SYNTAX EltexBgpConfigDropOrWarn
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to determine whether the session is
|
|
dropped or a warning is generated when the maximum number
|
|
of prefixes set is exceeded.
|
|
|
|
Setting eltexBgpPeerConfigDropWarn to 'drop' will cause the
|
|
session to be dropped when the prefix limit is reached."
|
|
DEFVAL { warn }
|
|
::= { eltexBgpPeerEntry 10 }
|
|
|
|
eltexBgpPeerMaxPrfxHold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time interval in seconds between when this BGP session
|
|
is turn down due to the number of prefixes received from
|
|
this peer exceeding the maximum in
|
|
eltexBgpPeerConfigMaxPrfx and when BGP attempts to
|
|
reestablish the session."
|
|
DEFVAL { 90 }
|
|
::= { eltexBgpPeerEntry 11 }
|
|
|
|
eltexBgpPeerConfigThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A percentage of the limit set by eltexBgpPeerConfigMaxPrfx.
|
|
When the number of prefixes received from this peer reaches
|
|
this threshold, BGP issues a warning.
|
|
|
|
This field is not used if eltexBgpPeerConfigMaxPrfx is set to
|
|
zero."
|
|
DEFVAL { 75 }
|
|
::= { eltexBgpPeerEntry 12 }
|
|
|
|
eltexBgpPeerConnectRetryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval for the ConnectRetry timer. The suggested
|
|
value for this timer is 120 seconds.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 120 }
|
|
::= { eltexBgpPeerEntry 13 }
|
|
|
|
eltexBgpPeerHoldTimeConfigd OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the Hold Time configured for
|
|
this BGP speaker with this peer. This value is placed in
|
|
an OPEN message sent to this peer by this BGP speaker, and
|
|
is compared with the Hold Time field in an OPEN message
|
|
received from the peer when determining the Hold Time
|
|
(eltexBgpPeerStatusHoldTime) with the peer. This value must not be
|
|
less than three seconds if it is not zero (0) in which
|
|
case the Hold Time is NOT to be established with the peer.
|
|
The value of this object is only allowed to be zero (0) if
|
|
the value of eltexBgpPeerKeepAliveConfigd is also zero (0).
|
|
The suggested value for this timer is 90 seconds.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 90 }
|
|
::= { eltexBgpPeerEntry 14 }
|
|
|
|
eltexBgpPeerKeepAliveConfigd OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 1..21845 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the KeepAlive configured for
|
|
this BGP speaker with this peer. The value of this object
|
|
will only determine the KEEPALIVE messages frequency
|
|
relative to the value specified in eltexBgpPeerHoldTimeConfigd
|
|
the actual time interval for the KEEPALIVE messages is
|
|
indicated by eltexBgpPeerStatusKeepAlive. A reasonable
|
|
maximum value for this timer would be configured to be one
|
|
third of that of eltexBgpPeerHoldTimeConfigd.
|
|
|
|
The value of this object is only allowed to be zero (0) if
|
|
the value of eltexBgpPeerHoldTimeConfigd is also zero (0). If
|
|
the value of this object is zero (0), no periodical
|
|
KEEPALIVE messages are sent to the peer after the BGP
|
|
connection has been established. The suggested value for
|
|
this timer is 30 seconds.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerEntry 15 }
|
|
|
|
eltexBgpPeerMinRouteAdvertiseInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the
|
|
MinRouteAdvertisementInterval timer. This determines the
|
|
minimum time between a BGP UPDATE to a peer advertising or
|
|
withdrawing a route and a subsequent BGP UPDATE to the
|
|
peer advertising a route to the same destination.
|
|
|
|
The default value for this timer is 30 seconds. Its value
|
|
must not be less than eltexBgpPeerMinRouteWithdrawInterval."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerEntry 16 }
|
|
|
|
eltexBgpPeerMinASOriginationInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for determining the minimum amount
|
|
of time that must elapse between successive advertisements of
|
|
UPDATE messages that report changes to a route within the
|
|
advertising BGP speaker's own autonomous system. The
|
|
suggested value for this timer is 15 seconds."
|
|
DEFVAL { 15 }
|
|
::= { eltexBgpPeerEntry 17 }
|
|
|
|
eltexBgpPeerMinRouteWithdrawInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the MinRouteWithdrawInterval
|
|
timer. This is the interval which is enforced between
|
|
advertisement and subsequent withdrawal of a route.
|
|
|
|
The default value for this timer is 30 seconds. The value
|
|
must not exceed that of eltexBgpPeerMinRouteAdvertiseInterval."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerEntry 18 }
|
|
|
|
eltexBgpPeerConfigOpenDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The delay to enforce in between a TCP connection with this
|
|
peer becoming established and a BGP Open message being
|
|
sent. If this delay is zero, then no delay will be
|
|
injected, and a BGP Open message will be sent as soon as
|
|
the TCP connection allows it.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerEntry 19 }
|
|
|
|
eltexBgpPeerConfigIdleHold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time to hold this peer in Idle state after a BGP
|
|
session has progressed beyond Idle state initially and
|
|
then returned to it. No new connections will be initiated
|
|
or accepted until the peer comes out of Idle state. By
|
|
setting this field to a large value, this timer can be
|
|
used to provide some level of peer oscillation damping, if
|
|
desired.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 15 }
|
|
::= { eltexBgpPeerEntry 20 }
|
|
|
|
eltexBgpPeerDistListPlIn OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Prefix List name identifying the Prefix List to use
|
|
to filter routes received from the peer."
|
|
::= { eltexBgpPeerEntry 21 }
|
|
|
|
eltexBgpPeerDistListPlOut OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Prefix List name identifying the Prefix List to use
|
|
to filter routes advertised to the peer."
|
|
::= { eltexBgpPeerEntry 22 }
|
|
|
|
eltexBgpPeerReflectorClient OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerReflectorClientType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value indicates whether the given peer is a reflector
|
|
client of this router, or not. A value of nonClient(0)
|
|
indicates that this peer is not a reflector client. A
|
|
value of client(1) indicates that this peer is a reflector
|
|
client that is not fully meshed with other reflector
|
|
clients. A value of meshedClient(2) indicates that the
|
|
peer is a reflector client and is fully meshed with all
|
|
other reflector clients.
|
|
|
|
For specific AFI/SAFI, this can be configured using
|
|
eltexBgpPeerAddrFamilyReflectorClient."
|
|
DEFVAL { nonClient }
|
|
::= { eltexBgpPeerEntry 23 }
|
|
|
|
eltexBgpPeerSoftResetWithStoredInfo OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This option causes all routes learned from a peer to be stored
|
|
so that the ARI can be recalculated (for example, due to a
|
|
change in import policy) without performing a route refresh or
|
|
restarting the peer session.
|
|
|
|
This field can only be changed when the peer is admin_status
|
|
DOWN.
|
|
|
|
This option overlaps with route refresh (RR) behavior. If the
|
|
option is enabled, Route refresh capability continues to be
|
|
advertized and the BGP router still responds to RR request
|
|
from the peer. However, route refresh messages will never
|
|
be sent to this peer."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerEntry 24 }
|
|
|
|
eltexBgpPeerConfigPeerGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the index of the peer group. If a peer is not in
|
|
a peer group then its eltexBgpPeerConfigPeerGroup value is 0"
|
|
::= { eltexBgpPeerEntry 25 }
|
|
|
|
eltexBgpPeerPathMtuDiscovery OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable path MTU discovery. If the feature is enabled, all
|
|
packets are sent with the 'Do not fragment' flag to this peer.
|
|
The maximum segment size for TCP connection with this peer
|
|
will be adjusted to the next-hop MTU value if an ICMP error
|
|
packet with 'Fragmentation needed' code is received."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerEntry 26 }
|
|
|
|
eltexBgpPeerBfdDesired OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether Bidirectional Forwarding Detection (BFD) is
|
|
desired for this peer.
|
|
|
|
This field can be changed at any time."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerEntry 27 }
|
|
|
|
--
|
|
-- BGP Peer <AFI, SAFI> configuration table.
|
|
--
|
|
|
|
eltexBgpPeerAddrFamilyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpPeerAddrFamilyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BGP Peer <AFI, SAFI> configuration table.
|
|
|
|
This table allows a user to configure peer characteristics
|
|
on a per AFI/SAFI basis.
|
|
|
|
This table is a configuration table - all status, statistics
|
|
and control fields are deprecated in favor of the BGP peer
|
|
AFI/SAFI status table (etlexBgpPeerAddrFamilyStatusTable).
|
|
|
|
This table does not contain entries for dynamic peers."
|
|
::= { eltexBgpPeerData 2 }
|
|
|
|
eltexBgpPeerAddrFamilyEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerAddrFamilyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer <AFI, SAFI> configuration table entry."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpPeerRemoteAddrType,
|
|
eltexBgpPeerRemoteAddr,
|
|
eltexBgpPeerAddrFamilyAfi,
|
|
eltexBgpPeerAddrFamilySafi }
|
|
::= { eltexBgpPeerAddrFamilyTable 1 }
|
|
|
|
EltexBgpPeerAddrFamilyEntry ::= SEQUENCE {
|
|
eltexBgpPeerAddrFamilyAfi EltexBgpAfi,
|
|
eltexBgpPeerAddrFamilySafi EltexBgpSafi,
|
|
eltexBgpPeerAddrFamilyDisable TruthValue,
|
|
eltexBgpPeerAddrFamilyNxtHopSlf TruthValue,
|
|
eltexBgpPeerAddrFamilyConfigMaxPrfx Unsigned32,
|
|
eltexBgpPeerAddrFamilyConfigDropWarn EltexBgpConfigDropOrWarn,
|
|
eltexBgpPeerAddrFamilyMaxPrfxHold Unsigned32,
|
|
eltexBgpPeerAddrFamilyConfigThreshold Unsigned32,
|
|
eltexBgpPeerAddrFamilyMinRteAdvertInt Unsigned32,
|
|
eltexBgpPeerAddrFamilyMinASOrigInt Unsigned32,
|
|
eltexBgpPeerAddrFamilyMinRteWithdrawInt Unsigned32,
|
|
eltexBgpPeerAddrFamilyReflectorClient EltexBgpPeerReflectorClientType,
|
|
eltexBgpPeerAddrFamilyRouteMapIn DisplayString,
|
|
eltexBgpPeerAddrFamilyRouteMapOut DisplayString
|
|
}
|
|
|
|
eltexBgpPeerAddrFamilyAfi OBJECT-TYPE
|
|
SYNTAX EltexBgpAfi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The AFI index into the peer <AFI, SAFI> table."
|
|
::= { eltexBgpPeerAddrFamilyEntry 1 }
|
|
|
|
eltexBgpPeerAddrFamilySafi OBJECT-TYPE
|
|
SYNTAX EltexBgpSafi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The SAFI index into the peer <AFI, SAFI> table."
|
|
::= { eltexBgpPeerAddrFamilyEntry 2 }
|
|
|
|
eltexBgpPeerAddrFamilyDisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When eltexBgpPeerAddrFamilyDisable is 'true', BGP will not
|
|
advertise Multiprotocol support to the peer for this
|
|
address family.
|
|
|
|
When eltexBgpPeerAddrFamilyDisable is 'false', BGP will
|
|
advertise Multiprotocol support to the peer if support
|
|
for the address family has been enabled in the
|
|
corresponding bgpRmAfiSafiTable entry.
|
|
|
|
Any update to this object will take effect the next time
|
|
that the eltexBgpPeerTable entry is activated
|
|
(eltexBgpPeerAdminStatus is changed to 'adminStatusUp').
|
|
|
|
If config usage bit eltexBgpPeerAddrFamilyGroupDisable
|
|
is set, and the peer belongs to a peer group, then the
|
|
eltexBgpPeerAddrFamilyGroupDisable value is used instead
|
|
of this value."
|
|
DEFVAL { true }
|
|
::= { eltexBgpPeerAddrFamilyEntry 3 }
|
|
|
|
eltexBgpPeerAddrFamilyNxtHopSlf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives finer control of the next-hop-self configuration
|
|
provided by eltexBgpPeerNxtHopSlf.
|
|
|
|
When eltexBgpPeerNxtHopSlf is 'false', BGP does not perform
|
|
next-hop-self for any address family.
|
|
|
|
When eltexBgpPeerNxtHopSlf is 'true', BGP performs
|
|
next-hop-self for those address families for which
|
|
eltexBgpPeerAddrFamilyNxtHopSlf is 'true'.
|
|
|
|
If the value of this object is changed while the peer session
|
|
is active, BGP will check for any routes that need to be
|
|
advertised or withdrawn as a result of the change."
|
|
DEFVAL { true }
|
|
::= { eltexBgpPeerAddrFamilyEntry 4 }
|
|
|
|
eltexBgpPeerAddrFamilyConfigMaxPrfx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives finer control of the maximum prefix configuration
|
|
provided by eltexBgpPeerConfigMaxPrfx.
|
|
|
|
To configure address family specific values for the maximum
|
|
number of prefixes that can be accepted from the peer,
|
|
set eltexBgpPeerConfigMaxPrfx to zero, and set
|
|
eltexBgpPeerAddrFamilyConfigMaxPrfx to the limit
|
|
for this address family."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerAddrFamilyEntry 5 }
|
|
|
|
eltexBgpPeerAddrFamilyConfigDropWarn OBJECT-TYPE
|
|
SYNTAX EltexBgpConfigDropOrWarn
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives finer control of the configuration provided by
|
|
eltexBgpPeerConfigDropWarn, which determines the behavior
|
|
when the maximum prefix limit is reached.
|
|
|
|
To configure whether the session is dropped or a warning is
|
|
behavior independently for different address
|
|
families, set eltexBgpPeerConfigDropWarn to 'warn', and set
|
|
the value of eltexBgpPeerAddrFamilyConfigDropWarn for
|
|
each address family as needed."
|
|
DEFVAL { warn }
|
|
::= { eltexBgpPeerAddrFamilyEntry 6 }
|
|
|
|
eltexBgpPeerAddrFamilyMaxPrfxHold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives finer control of the configuration provided by
|
|
eltexBgpPeerMaxPrfxHold, which determines the time interval in
|
|
seconds between when this BGP session is torn down due to
|
|
the number of prefixes received from this peer exceeding the
|
|
maximum in eltexBgpPeerConfigMaxPrfx(AfiSafi) and when BGP
|
|
attempts to reestablish the session.
|
|
|
|
To configure a time interval for individual families, set
|
|
eltexBgpPeerMaxPrfxHold to zero and set
|
|
eltexBgpPeerAddrFamilyMaxPrfxHold to the required time
|
|
interval for each address family."
|
|
DEFVAL { 90 }
|
|
::= { eltexBgpPeerAddrFamilyEntry 7 }
|
|
|
|
eltexBgpPeerAddrFamilyConfigThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives finer control of the threshold configuration
|
|
provided by eltexBgpPeerConfigThreshold. When the number of
|
|
prefixes received from this peer for this address family
|
|
reaches this threshold, BGP issues a warning.
|
|
|
|
This field is not used if eltexBgpPeerConfigMaxPrfx and
|
|
eltexBgpPeerAddrFamilyConfigThreshold are set to zero.
|
|
|
|
To configure a threshold for individual families, set
|
|
eltexBgpPeerConfigMaxPrfx to zero and set
|
|
eltexBgpPeerAddrFamilyConfigThreshold to the required
|
|
threshold for each address family."
|
|
DEFVAL { 75 }
|
|
::= { eltexBgpPeerAddrFamilyEntry 8 }
|
|
|
|
eltexBgpPeerAddrFamilyMinRteAdvertInt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the
|
|
MinRouteAdvertisementInterval timer. This determines the
|
|
minimum time between a BGP UPDATE to a peer advertising or
|
|
withdrawing a route and a subsequent BGP UPDATE to the
|
|
peer advertising a route to the same destination."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerAddrFamilyEntry 9 }
|
|
|
|
eltexBgpPeerAddrFamilyMinASOrigInt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for determining the minimum
|
|
amount of time that must elapse between successive
|
|
advertisements of UPDATE messages that report changes to a
|
|
route within the advertising BGP speaker's own autonomous
|
|
system.
|
|
|
|
This field has no effect if
|
|
eltexBgpPeerMinASOriginationInterval is set to a non-zero
|
|
value. To configure values independently for each address
|
|
family, set eltexBgpPeerMinASOriginationInterval to 0 and set
|
|
the values of eltexBgpPeerAddrFamilyMinASOrigInt as required."
|
|
DEFVAL { 15 }
|
|
::= { eltexBgpPeerAddrFamilyEntry 10 }
|
|
|
|
eltexBgpPeerAddrFamilyMinRteWithdrawInt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the MinRouteWithdrawInterval
|
|
timer. This is the interval which is enforced between
|
|
advertisement and subsequent withdrawal of a route.
|
|
|
|
This field has no effect if
|
|
eltexBgpPeerMinRouteWithdrawInterval is set to a non-zero
|
|
value. To configure values independently for each address
|
|
family, set eltexBgpPeerMinRouteWithdrawInterval to 0 and
|
|
set the values of eltexBgpPeerAddrFamilyMinRteWithdrawInt
|
|
as required."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerAddrFamilyEntry 11 }
|
|
|
|
eltexBgpPeerAddrFamilyReflectorClient OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerReflectorClientType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives finer control of the configuration provided by
|
|
eltexBgpPeerReflectorClient.
|
|
|
|
This value indicates whether the given peer is a reflector
|
|
client of this router for this AFI/SAFI, or not. A value
|
|
of nonClient(0) indicates that this peer is not a
|
|
reflector client for this AFI/SAFI. A value of client(1)
|
|
indicates that this peer is a reflector client for this
|
|
AFI/SAFI that is not fully meshed with other reflector
|
|
clients. A value of meshedClient(2) indicates that the
|
|
peer is a reflector client for this AFI/SAFI and is fully
|
|
meshed with all other reflector clients.
|
|
|
|
The peer's reflector-client setting for this AFI/SAFI is
|
|
chosen as follows.
|
|
|
|
- If the peer is not a member of a peer group
|
|
o If eltexBgpPeerReflectorClient is NOT non-client then use
|
|
that
|
|
o Otherwise use eltexBgpPeerAddrFamilyReflectorClient.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { nonClient }
|
|
::= { eltexBgpPeerAddrFamilyEntry 12 }
|
|
|
|
eltexBgpPeerAddrFamilyRouteMapIn OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the Route Map to use for route imports from
|
|
the peer for this AFI/SAFI."
|
|
::= { eltexBgpPeerAddrFamilyEntry 13 }
|
|
|
|
eltexBgpPeerAddrFamilyRouteMapOut OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the Route Map to use for route exports to the
|
|
peer for this AFI/SAFI."
|
|
::= { eltexBgpPeerAddrFamilyEntry 14 }
|
|
|
|
--
|
|
-- BGP peer status table.
|
|
--
|
|
-- This table reports BGP peer status and statistics.
|
|
--
|
|
|
|
eltexBgpPeerStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpPeerStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BGP peer status table.
|
|
|
|
This table reports BGP peer status and statistics. It also
|
|
allows a user to control BGP peer statistics and peer
|
|
sessions.
|
|
|
|
This table does not contain any BGP peer configuration -
|
|
the eltexBgpPeerTable MIB is the BGP peer configuration MIB.
|
|
|
|
This table contains entries for both configured and dynamic
|
|
peers.
|
|
|
|
For configured peers the corresponding rows in the
|
|
eltexBgpPeerTable MIB and eltexBgpPeerStatusTable MIB have
|
|
identical index fields.
|
|
|
|
The lifetime of a BGP peer status entry depends on whether
|
|
the BGP peer is configured or dynamic.
|
|
- The entry for a configured peer is created and destroyed
|
|
when the corresponding entry in the BGP peer
|
|
configuration table (eltexBgpPeerTable) is created and
|
|
destroyed.
|
|
- The entry for a dynamic peer is created when the BGP
|
|
peering session is established. It is destroyed when
|
|
the BGP session has terminated."
|
|
::= { eltexBgpPeerData 3 }
|
|
|
|
eltexBgpPeerStatusEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information about the status of a BGP peer."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpPeerRemoteAddrType,
|
|
eltexBgpPeerRemoteAddr }
|
|
::= { eltexBgpPeerStatusTable 1 }
|
|
|
|
EltexBgpPeerStatusEntry ::= SEQUENCE {
|
|
eltexBgpPeerStatusIdentifier EltexBgpIdentifier,
|
|
eltexBgpPeerStatusState EltexBgpPeerStates,
|
|
eltexBgpPeerStatusDynamicPeer TruthValue,
|
|
eltexBgpPeerStatusRemoteAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpPeerStatusPeerIndex Unsigned32,
|
|
eltexBgpPeerStatusCapsSupport TruthValue,
|
|
eltexBgpPeerStatusLastError OCTET STRING,
|
|
eltexBgpPeerStatusLastErrorDataLen Unsigned32,
|
|
eltexBgpPeerStatusLastErrorData OCTET STRING,
|
|
eltexBgpPeerStatusFsmEstablishedTime Gauge32,
|
|
eltexBgpPeerStatusInUpdatesElpsTime Gauge32,
|
|
eltexBgpPeerStatusHoldTime Integer32,
|
|
eltexBgpPeerStatusKeepAlive Integer32,
|
|
eltexBgpPeerStatusInOpens Counter32,
|
|
eltexBgpPeerStatusOutOpens Counter32,
|
|
eltexBgpPeerStatusInNotifications Counter32,
|
|
eltexBgpPeerStatusOutNotifications Counter32,
|
|
eltexBgpPeerStatusInUpdates Counter32,
|
|
eltexBgpPeerStatusOutUpdates Counter32,
|
|
eltexBgpPeerStatusInKeepalives Counter32,
|
|
eltexBgpPeerStatusOutKeepalives Counter32,
|
|
eltexBgpPeerStatusInRefreshes Counter32,
|
|
eltexBgpPeerStatusOutRefreshes Counter32,
|
|
eltexBgpPeerStatusInTotalMessages Counter32,
|
|
eltexBgpPeerStatusOutTotalMessages Counter32,
|
|
eltexBgpPeerStatusFsmEstTransitions Counter32,
|
|
eltexBgpPeerStatusConnectRetryCount Counter32,
|
|
eltexBgpPeerStatusClearCnts TruthValue,
|
|
eltexBgpPeerStatusRtRefresh TruthValue,
|
|
eltexBgpPeerStatusLastErrorRcvd OCTET STRING,
|
|
eltexBgpPeerStatusLastErrorRcvdTime TimeStamp,
|
|
eltexBgpPeerStatusLastErrorSent OCTET STRING,
|
|
eltexBgpPeerStatusLastErrorSentTime TimeStamp,
|
|
eltexBgpPeerStatusLastState EltexBgpPeerStates,
|
|
eltexBgpPeerStatusLastEvent EltexBgpPeerEvents,
|
|
eltexBgpPeerStatusCapsSent EltexBgpCapabilities,
|
|
eltexBgpPeerStatusCapsRcvd EltexBgpCapabilities,
|
|
eltexBgpPeerStatusCapsNegotiated EltexBgpCapabilities,
|
|
eltexBgpPeerStatusRcvdMsgElpsTime TimeInterval,
|
|
eltexBgpPeerStatusIdleHoldRemTime TimeInterval,
|
|
eltexBgpPeerStatusRouteRefrSent Counter32,
|
|
eltexBgpPeerStatusRouteRefrRcvd Counter32,
|
|
eltexBgpPeerStatusSelLocalAddrType InetAddressType,
|
|
eltexBgpPeerStatusSelLocalAddr InetAddress,
|
|
eltexBgpPeerStatusSelLocalPort InetPortNumber,
|
|
eltexBgpPeerStatusSelRemotePort InetPortNumber,
|
|
eltexBgpPeerStatusSelLocalAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpPeerStatusSelRemoteAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpPeerStatusInPrfxes Gauge32,
|
|
eltexBgpPeerStatusOutPrfxes Gauge32,
|
|
eltexBgpPeerStatusOutPrfxesAdvertised Gauge32,
|
|
eltexBgpPeerStatusConfigState EltexBgpPeerConfigStates,
|
|
eltexBgpPeerStatusConnectRetryInt Unsigned32,
|
|
eltexBgpPeerStatusConfigPassive TruthValue,
|
|
eltexBgpPeerStatusConfigOpenDelay Unsigned32,
|
|
eltexBgpPeerStatusConfigIdleHold Unsigned32,
|
|
eltexBgpPeerStatusTtl Integer32,
|
|
eltexBgpPeerStatusHoldTimeConfigd Unsigned32,
|
|
eltexBgpPeerStatusKeepAliveConfigd Unsigned32,
|
|
eltexBgpPeerStatusResendAllRoutes TruthValue,
|
|
eltexBgpPeerStatusOutUpdateElpsTime Gauge32,
|
|
eltexBgpPeerStatusOutPrfxesDenied Counter32,
|
|
eltexBgpPeerStatusOutPrfxesImpWdr Counter32,
|
|
eltexBgpPeerStatusOutPrfxesExpWdr Counter32,
|
|
eltexBgpPeerStatusInPrfxesImpWdr Counter32,
|
|
eltexBgpPeerStatusInPrfxesExpWdr Counter32,
|
|
eltexBgpPeerStatusReceivedHoldTime Integer32,
|
|
eltexBgpPeerStatusDropSession TruthValue,
|
|
eltexBgpPeerStatusCeaseErrorSubcode EltexBgpCeaseErrorSubcode,
|
|
eltexBgpPeerStatusBfdStatus EltexBfdSessionStatus
|
|
}
|
|
|
|
eltexBgpPeerStatusIdentifier OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The BGP Identifier of this entry's BGP peer.
|
|
|
|
This entry is zero unless the eltexBgpPeerStatusState is in the
|
|
openconfirm or the established state."
|
|
::= { eltexBgpPeerStatusEntry 1 }
|
|
|
|
eltexBgpPeerStatusState OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerStates
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The BGP peer's FSM state."
|
|
::= { eltexBgpPeerStatusEntry 2 }
|
|
|
|
eltexBgpPeerStatusDynamicPeer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether the peer is dynamic (true) or individually
|
|
configured (false)."
|
|
::= { eltexBgpPeerStatusEntry 3 }
|
|
|
|
eltexBgpPeerStatusRemoteAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remote autonomous system number in use on the session.
|
|
For configured peers not yet active, this is the
|
|
configured value."
|
|
::= { eltexBgpPeerStatusEntry 4 }
|
|
|
|
eltexBgpPeerStatusPeerIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The peer index.
|
|
|
|
The peer index is a unique index for the peer entry in the
|
|
eltexBgpPeerStatusTable. It is used to provide an index value
|
|
for other tables whose data is logically per-peer."
|
|
::= { eltexBgpPeerStatusEntry 5 }
|
|
|
|
eltexBgpPeerStatusCapsSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether or not this peer accepted our local capabilities
|
|
optional parameter sent on the OPEN message. This field
|
|
will not be relevant until the peer has reached open_confirm
|
|
state. Note that this field indicates support or otherwise
|
|
of the capabilities optional parameter, not a specific
|
|
capability."
|
|
::= { eltexBgpPeerStatusEntry 6 }
|
|
|
|
eltexBgpPeerStatusLastError OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last error code and subcode sent or received on this
|
|
connection. If no error has occurred, this field is zero.
|
|
Otherwise, the first byte of this two byte OCTET STRING
|
|
contains the error code, and the second byte contains the
|
|
subcode."
|
|
::= { eltexBgpPeerStatusEntry 7 }
|
|
|
|
eltexBgpPeerStatusLastErrorDataLen OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The length of the last error data. If this is zero no
|
|
error data was provided or generated."
|
|
::= { eltexBgpPeerStatusEntry 8 }
|
|
|
|
eltexBgpPeerStatusLastErrorData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last error code's data seen by this peer on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 9 }
|
|
|
|
eltexBgpPeerStatusFsmEstablishedTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This timer indicates how long in seconds this peer has
|
|
been in the Established state or how long since this peer
|
|
was last in the Established state. It is set to zero when
|
|
a new peer is configured or the router is booted."
|
|
::= { eltexBgpPeerStatusEntry 10 }
|
|
|
|
eltexBgpPeerStatusInUpdatesElpsTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elapsed time in seconds since the last BGP Update message
|
|
was received from the peer."
|
|
::= { eltexBgpPeerStatusEntry 11 }
|
|
|
|
eltexBgpPeerStatusHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the Hold Timer established
|
|
with the peer.
|
|
|
|
The Hold Timer interval is calculated by this BGP speaker by
|
|
using the smaller of the configured eltexBgpPeerHoldTimeConfigd
|
|
value and the Hold Time received in the OPEN message.
|
|
|
|
For dynamic peers the Hold Timer interval is calculated
|
|
using the default eltexBgpPeerHoldTimeConfigd value rather than
|
|
a configured value.
|
|
|
|
A value of zero indicates that the Hold Timer has not been
|
|
established with the peer."
|
|
::= { eltexBgpPeerStatusEntry 12 }
|
|
|
|
eltexBgpPeerStatusKeepAlive OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the KeepAlive Timer
|
|
established with the peer.
|
|
|
|
The KeepAlive Timer interval is calculated by this BGP speaker
|
|
such that, when compared with eltexBgpPeerStatusHoldTime,
|
|
it has the same proportion as the configured
|
|
eltexBgpPeerKeepAliveConfigd has when compared with
|
|
eltexBgpPeerHoldTimeConfigd.
|
|
|
|
For dynamic peers the KeepAlive Timer interval is calculated
|
|
using the default eltexBgpPeerKeepAliveConfigd and
|
|
eltexBgpPeerHoldTimeConfigd values rather than configured values.
|
|
|
|
A value of zero indicates that the KeepAlive Timer has not
|
|
been established with the peer."
|
|
::= { eltexBgpPeerStatusEntry 13 }
|
|
|
|
eltexBgpPeerStatusInOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP OPEN messages received on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 14 }
|
|
|
|
eltexBgpPeerStatusOutOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP OPEN messages transmitted on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 15 }
|
|
|
|
eltexBgpPeerStatusInNotifications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP NOTIFICATION messages received on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 16 }
|
|
|
|
eltexBgpPeerStatusOutNotifications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP NOTIFICATION messages transmitted on
|
|
this connection."
|
|
::= { eltexBgpPeerStatusEntry 17 }
|
|
|
|
eltexBgpPeerStatusInUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP UPDATE messages received on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 18 }
|
|
|
|
eltexBgpPeerStatusOutUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP UPDATE messages transmitted on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 19 }
|
|
|
|
eltexBgpPeerStatusInKeepalives OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP KEEPALIVE messages received on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 20 }
|
|
|
|
eltexBgpPeerStatusOutKeepalives OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP KEEPALIVE messages transmitted on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 21 }
|
|
|
|
eltexBgpPeerStatusInRefreshes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP ROUTE REFRESH messages received on this
|
|
connection."
|
|
::= { eltexBgpPeerStatusEntry 22 }
|
|
|
|
eltexBgpPeerStatusOutRefreshes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of BGP ROUTE REFRESH messages transmitted on
|
|
this connection."
|
|
::= { eltexBgpPeerStatusEntry 23 }
|
|
|
|
eltexBgpPeerStatusInTotalMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of messages received from the remote peer
|
|
on this connection."
|
|
::= { eltexBgpPeerStatusEntry 24 }
|
|
|
|
eltexBgpPeerStatusOutTotalMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of messages transmitted to the remote
|
|
peer on this connection."
|
|
::= { eltexBgpPeerStatusEntry 25 }
|
|
|
|
eltexBgpPeerStatusFsmEstTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of times the BGP FSM transitioned into
|
|
the established state for this peer."
|
|
::= { eltexBgpPeerStatusEntry 26 }
|
|
|
|
eltexBgpPeerStatusConnectRetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current connect retry count of this peer.
|
|
|
|
This is incremented each time the peer session flaps, and is
|
|
used to determine the time to wait before retrying the
|
|
session.
|
|
|
|
Note this is only incremented when an active session
|
|
terminates abnormally, and not when it simply fails to come
|
|
up."
|
|
::= { eltexBgpPeerStatusEntry 27 }
|
|
|
|
eltexBgpPeerStatusClearCnts OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set this field to 'true' to clear the counters associated
|
|
with this peer.
|
|
|
|
Reading the value of this field has no meaning. The field
|
|
is not returned on a MIB Get."
|
|
::= { eltexBgpPeerStatusEntry 28 }
|
|
|
|
eltexBgpPeerStatusRtRefresh OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set this field to 'true' to trigger sending a route
|
|
refresh request for this peer.
|
|
|
|
Setting this field will only have an effect if a BGP
|
|
session to the peer is active. Peers that do not support
|
|
route refresh will have their sessions toggled.
|
|
|
|
Reading the value of this field has no meaning. The field
|
|
is not returned on a MIB Get."
|
|
::= { eltexBgpPeerStatusEntry 29 }
|
|
|
|
eltexBgpPeerStatusLastErrorRcvd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last error code and subcode received from the peer on
|
|
this connection.
|
|
|
|
If no error has been received from the peer, this field is
|
|
zero. Otherwise, the first byte of this two byte OCTET
|
|
STRING contains the error code, and the second byte contains
|
|
the subcode."
|
|
::= { eltexBgpPeerStatusEntry 30 }
|
|
|
|
eltexBgpPeerStatusLastErrorRcvdTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime when the last error was received
|
|
from the peer on this connection.
|
|
|
|
If no error has been received from the peer, this field is
|
|
zero."
|
|
::= { eltexBgpPeerStatusEntry 31 }
|
|
|
|
eltexBgpPeerStatusLastErrorSent OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last error code and subcode sent to the peer on this
|
|
connection.
|
|
|
|
If no error has been sent to the peer, this field is zero.
|
|
Otherwise, the first byte of this two byte OCTET STRING
|
|
contains the error code, and the second byte contains the
|
|
subcode."
|
|
::= { eltexBgpPeerStatusEntry 32 }
|
|
|
|
eltexBgpPeerStatusLastErrorSentTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime when the last error was sent to the
|
|
peer on this connection.
|
|
|
|
If no error has been sent to the peer, this field is zero."
|
|
::= { eltexBgpPeerStatusEntry 33 }
|
|
|
|
eltexBgpPeerStatusLastState OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerStates
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The BGP peer's previous FSM state."
|
|
::= { eltexBgpPeerStatusEntry 34 }
|
|
|
|
eltexBgpPeerStatusLastEvent OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerEvents
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last input to be made to the BGP peer's FSM."
|
|
::= { eltexBgpPeerStatusEntry 35 }
|
|
|
|
eltexBgpPeerStatusCapsSent OBJECT-TYPE
|
|
SYNTAX EltexBgpCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The capabilities announced to the peer on the most recent
|
|
Open message sent to the peer. This field is set to zero
|
|
before the first Open message is sent to the peer, and
|
|
is unchanged if the session comes down."
|
|
::= { eltexBgpPeerStatusEntry 36 }
|
|
|
|
eltexBgpPeerStatusCapsRcvd OBJECT-TYPE
|
|
SYNTAX EltexBgpCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The capabilities received on the most recent Open message
|
|
received from the peer. This field is set to zero before
|
|
the first Open message is received from the peer, and is
|
|
unchanged if the session comes down.
|
|
|
|
In the event that the peer signals a capability that BGP
|
|
does not recognize, this field will only contain those
|
|
capabilities that BGP recognizes. A user should walk the
|
|
eltexBgpPeerCapsRcvdTable to confirm the full list of
|
|
capabilities received from the peer."
|
|
::= { eltexBgpPeerStatusEntry 37 }
|
|
|
|
eltexBgpPeerStatusCapsNegotiated OBJECT-TYPE
|
|
SYNTAX EltexBgpCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The capabilities negotiated for the session with the peer.
|
|
This field is set to zero before Open messages have been
|
|
exchanged with the peer, and is unchanged if the session
|
|
comes down."
|
|
::= { eltexBgpPeerStatusEntry 38 }
|
|
|
|
eltexBgpPeerStatusRcvdMsgElpsTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The elapsed time in hundredths of a second since anything
|
|
was received from this peer. If nothing has been received
|
|
from this peer, this field is set to zero. If the session
|
|
comes down this value continues to increase."
|
|
::= { eltexBgpPeerStatusEntry 39 }
|
|
|
|
eltexBgpPeerStatusIdleHoldRemTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "For a peer in 'idle' state, the time remaining in
|
|
hundredths of a second until BGP will try to reactivate
|
|
the connection. If the peer is not in 'idle' state, this is
|
|
set to zero."
|
|
::= { eltexBgpPeerStatusEntry 40 }
|
|
|
|
eltexBgpPeerStatusRouteRefrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Route Refresh messages sent to the peer.
|
|
|
|
If the session comes down this value is unchanged, and will
|
|
continue to increment if the session is reestablished.
|
|
|
|
However, for dynamic peers the peer status entry is lost
|
|
if the BGP session is not re-established within the graceful
|
|
restart period, and in this case the value of this field
|
|
is lost."
|
|
::= { eltexBgpPeerStatusEntry 41 }
|
|
|
|
eltexBgpPeerStatusRouteRefrRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Route Refresh messages received from the
|
|
peer.
|
|
|
|
If the session comes down this value is unchanged, and will
|
|
continue to increment if the session is reestablished.
|
|
|
|
However, for dynamic peers the peer status entry is lost
|
|
if the BGP session is not re-established within the graceful
|
|
restart period, and in this case the value of this field
|
|
is lost."
|
|
::= { eltexBgpPeerStatusEntry 42 }
|
|
|
|
eltexBgpPeerStatusSelLocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address family of the local address used by the
|
|
transport connection for the peering session.
|
|
|
|
A value of none implies that there is currently no
|
|
connection to this peer."
|
|
::= { eltexBgpPeerStatusEntry 43 }
|
|
|
|
eltexBgpPeerStatusSelLocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local address used by the transport connection for the
|
|
peering session."
|
|
::= { eltexBgpPeerStatusEntry 44 }
|
|
|
|
eltexBgpPeerStatusSelLocalPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local port used by the transport connection for the
|
|
peering session.
|
|
|
|
A value of zero implies that there is currently no
|
|
connection to this peer."
|
|
::= { eltexBgpPeerStatusEntry 45 }
|
|
|
|
eltexBgpPeerStatusSelRemotePort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remote port used by the transport connection for the
|
|
peering session.
|
|
|
|
A value of zero implies that there is currently no
|
|
connection to this peer."
|
|
::= { eltexBgpPeerStatusEntry 46 }
|
|
|
|
eltexBgpPeerStatusSelLocalAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local AS number used on this session.
|
|
|
|
If the eltexBgpPeerStatusState is not 'established', then this
|
|
field is zero."
|
|
::= { eltexBgpPeerStatusEntry 47 }
|
|
|
|
eltexBgpPeerStatusSelRemoteAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remote AS number used on this session.
|
|
|
|
If the eltexBgpPeerStatusState is not 'established', then this
|
|
field is zero."
|
|
::= { eltexBgpPeerStatusEntry 48 }
|
|
|
|
eltexBgpPeerStatusInPrfxes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of prefixes received from this peer."
|
|
::= { eltexBgpPeerStatusEntry 49 }
|
|
|
|
eltexBgpPeerStatusOutPrfxes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of prefixes that are installed in all of this
|
|
peer's Adj-RIBs-Out."
|
|
::= { eltexBgpPeerStatusEntry 50 }
|
|
|
|
eltexBgpPeerStatusOutPrfxesAdvertised OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of prefixes advertised to this peer."
|
|
::= { eltexBgpPeerStatusEntry 51 }
|
|
|
|
eltexBgpPeerStatusConfigState OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerConfigStates
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This field reports the state of the peer configuration.
|
|
The peer configuration may be in one of the following
|
|
states.
|
|
|
|
- Up to date. That is, all configuration set by MIBs for
|
|
this peer has been applied to the current peer session
|
|
(if it exists).
|
|
|
|
- Out of date, requiring the peer's admin status to be
|
|
set to down before all the current MIB configuration
|
|
for this peer can be applied.
|
|
|
|
- Out of date, requiring the peer's row status to be set
|
|
to inactive before all the current MIB configuration
|
|
for this peer can be applied."
|
|
::= { eltexBgpPeerStatusEntry 52 }
|
|
|
|
eltexBgpPeerStatusConnectRetryInt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active time interval for the ConnectRetry
|
|
timer.
|
|
|
|
This value may be different from the current peer MIB
|
|
value (eltexBgpPeerConnectRetryInterval) if the peer takes its
|
|
value from a peer group MIB
|
|
(eltexBgpPeergrConnectRetryInterval) or the MIB which provides
|
|
the value has been changed since the peer session was
|
|
started."
|
|
::= { eltexBgpPeerStatusEntry 53 }
|
|
|
|
eltexBgpPeerStatusConfigPassive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current active passive flag. If TRUE, then no
|
|
outbound connections will be initiated, and only incoming
|
|
connections will be accepted. If FALSE, then outbound
|
|
connections will be attempted to this peer, and incoming
|
|
connections will be accepted from this peer."
|
|
::= { eltexBgpPeerStatusEntry 54 }
|
|
|
|
eltexBgpPeerStatusConfigOpenDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active delay to enforce in between a TCP
|
|
connection with this peer becoming established and a BGP
|
|
Open message being sent."
|
|
::= { eltexBgpPeerStatusEntry 55 }
|
|
|
|
eltexBgpPeerStatusConfigIdleHold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active time to hold this peer in Idle state
|
|
after a BGP session has progressed beyond Idle state
|
|
initially and then returned to it."
|
|
::= { eltexBgpPeerStatusEntry 56 }
|
|
|
|
eltexBgpPeerStatusTtl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active Time To Live used by the connection
|
|
on this peer."
|
|
::= { eltexBgpPeerStatusEntry 57 }
|
|
|
|
eltexBgpPeerStatusHoldTimeConfigd OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active time interval in seconds for the Hold
|
|
Time configured for this BGP speaker with this peer."
|
|
::= { eltexBgpPeerStatusEntry 58 }
|
|
|
|
eltexBgpPeerStatusKeepAliveConfigd OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active time interval in seconds for the
|
|
KeepAlive configured for this BGP speaker with this peer."
|
|
::= { eltexBgpPeerStatusEntry 59 }
|
|
|
|
eltexBgpPeerStatusResendAllRoutes OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set this to 'true' to trigger BGP to re-send all routes
|
|
to the peer. If the peer supports enhanced route refresh,
|
|
then the routes will be sent as an unsolicited enhanced
|
|
route refresh.
|
|
|
|
Setting this field will only have an effect if a BGP
|
|
session to the peer is active.
|
|
|
|
This field always has the value 'false' when read."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerStatusEntry 60 }
|
|
|
|
eltexBgpPeerStatusOutUpdateElpsTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elapsed time in seconds since the last BGP UPDATE message
|
|
was sent to this peer. Each time eltexBgpPeerStatusOutUpdates
|
|
is incremented, the value of this object is set to zero
|
|
(0)."
|
|
::= { eltexBgpPeerStatusEntry 61 }
|
|
|
|
eltexBgpPeerStatusOutPrfxesDenied OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the number of prefixes in the Loc-RIB that have
|
|
have failed export policy checks and so have not been
|
|
installed in the Adj-RIB-Out for this peer."
|
|
::= { eltexBgpPeerStatusEntry 62 }
|
|
|
|
eltexBgpPeerStatusOutPrfxesImpWdr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of routes for which an implicit withdraw
|
|
has been sent to this peer. A route is implicitly
|
|
withdrawn if a replacement route with the same NLRI is
|
|
advertised to the peer."
|
|
::= { eltexBgpPeerStatusEntry 63 }
|
|
|
|
eltexBgpPeerStatusOutPrfxesExpWdr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of routes for which an explicit withdraw
|
|
has been sent to this peer. A route is explicitly
|
|
withdrawn if it is advertised in the WITHDRAWN ROUTES
|
|
field in an UPDATE message sent to the peer."
|
|
::= { eltexBgpPeerStatusEntry 64 }
|
|
|
|
eltexBgpPeerStatusInPrfxesImpWdr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of routes that have been implicitly
|
|
withdrawn by this peer. A route is implicitly withdrawn
|
|
if a replacement route with the same NLRI is received from
|
|
the peer."
|
|
::= { eltexBgpPeerStatusEntry 65 }
|
|
|
|
eltexBgpPeerStatusInPrfxesExpWdr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of routes that have been explicitly
|
|
withdrawn by this peer. A route is explicitly withdrawn
|
|
if it is advertised in the WITHDRAWN ROUTES field in an
|
|
UPDATE message received from the peer."
|
|
::= { eltexBgpPeerStatusEntry 66 }
|
|
|
|
eltexBgpPeerStatusReceivedHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Hold Time value received in the OPEN message from this
|
|
peer.
|
|
|
|
A value of zero indicates that no Hold Time has been
|
|
received from the peer."
|
|
::= { eltexBgpPeerStatusEntry 67 }
|
|
|
|
eltexBgpPeerStatusDropSession OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set this field to 'true' to drop the current session with
|
|
the BGP peer. For a dynamic BGP peer this causes the
|
|
peer status entry to disappear if the BGP session is not
|
|
re-established within the graceful restart period.
|
|
|
|
Reading the value of this field has no meaning. The field
|
|
is not returned on a MIB Get."
|
|
::= { eltexBgpPeerStatusEntry 68 }
|
|
|
|
eltexBgpPeerStatusCeaseErrorSubcode OBJECT-TYPE
|
|
SYNTAX EltexBgpCeaseErrorSubcode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The error subcode to be sent in the Cease Notification
|
|
messages triggered by setting eltexBgpPeerStatusDropSession to
|
|
'true'. If set to 'none' then DC-BGP chooses the subcode
|
|
itself.
|
|
|
|
This field does not affect the error subcode for Cease
|
|
Notification messages triggered for other reasons."
|
|
DEFVAL { none }
|
|
::= { eltexBgpPeerStatusEntry 69 }
|
|
|
|
eltexBgpPeerStatusBfdStatus OBJECT-TYPE
|
|
SYNTAX EltexBfdSessionStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BFD session state for this peer."
|
|
::= { eltexBgpPeerStatusEntry 70 }
|
|
|
|
--
|
|
-- BGP peer <AFI, SAFI> status table.
|
|
--
|
|
-- This table allows a user to control BGP peer AFI/SAFI operations.
|
|
--
|
|
|
|
eltexBgpPeerAddrFamilyStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpPeerAddrFamilyStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BGP peer <AFI, SAFI> status table.
|
|
|
|
This table allows a user to control BGP peer AFI/SAFI
|
|
operations.
|
|
|
|
In future this table may also report BGP peer AFI/SAFI
|
|
status and statistics.
|
|
|
|
This table does not contain any BGP peer AFI/SAFI
|
|
configuration - the eltexBgpPeerAddrFamilyTable MIB is the BGP
|
|
peer AFI/SAFI configuration MIB.
|
|
|
|
This table contains entries for both configured and dynamic
|
|
peers.
|
|
|
|
Rows in this table cannot be created or destroyed manually.
|
|
A table entry for each supported address family is created
|
|
automatically when an entry in the eltexBgpPeerStatusTable is
|
|
created. The entries are destroyed when the
|
|
eltexBgpPeerStatusTable entry is destroyed."
|
|
::= { eltexBgpPeerData 4 }
|
|
|
|
eltexBgpPeerAddrFamilyStatusEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerAddrFamilyStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information about the status of a BGP peer
|
|
for a particular AFI/SAFI."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpPeerRemoteAddrType,
|
|
eltexBgpPeerRemoteAddr,
|
|
eltexBgpPeerAddrFamilyAfi,
|
|
eltexBgpPeerAddrFamilySafi }
|
|
::= { eltexBgpPeerAddrFamilyStatusTable 1 }
|
|
|
|
EltexBgpPeerAddrFamilyStatusEntry ::= SEQUENCE {
|
|
eltexBgpPeerAddrFamilyStatusRtRefresh TruthValue,
|
|
eltexBgpPeerAddrFamilyStatusAddPathCapNeg EltexBgpAddPathSrCap,
|
|
eltexBgpPeerAddrFamilyStatusReflectorClient EltexBgpPeerReflectorClientType,
|
|
eltexBgpPeerAddrFamilyStatusUpdateGroup Unsigned32,
|
|
eltexBgpPeerAddrFamilyStatusResendAllRoutes TruthValue
|
|
}
|
|
|
|
eltexBgpPeerAddrFamilyStatusRtRefresh OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set this to 'true' to trigger BGP to send a Route Refresh
|
|
request to the peer for this AFI/SAFI.
|
|
|
|
Setting this field will only have an effect if a BGP
|
|
session to the peer is active. Peers that do not support
|
|
route refresh will have their sessions toggled.
|
|
|
|
This field always has the value 'false' when read."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerAddrFamilyStatusEntry 1 }
|
|
|
|
eltexBgpPeerAddrFamilyStatusAddPathCapNeg OBJECT-TYPE
|
|
SYNTAX EltexBgpAddPathSrCap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The BGP additional path capability negotiated with this
|
|
peer for this AFI/SAFI."
|
|
::= { eltexBgpPeerAddrFamilyStatusEntry 2 }
|
|
|
|
eltexBgpPeerAddrFamilyStatusReflectorClient OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerReflectorClientType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently active value which indicates whether the
|
|
given peer is a reflector client of this router for this
|
|
AFI/SAFI, or not.
|
|
|
|
This value may be different from the current peer AFI/SAFI
|
|
MIB value (eltexBgpPeerAddrFamilyReflectorClient) if any of the
|
|
following are true.
|
|
- The peer takes its reflector client status from the
|
|
current peer MIB value (eltexBgpPeerReflectorClient) or from
|
|
a peer group MIB (eltexBgpPeerGroupReflectorClient).
|
|
- The peer takes its value from a peer group AFI/SAFI MIB
|
|
(eltexBgpPeerAddrFamilyGroupReflectorClient).
|
|
- The MIB which provides the value has been changed since
|
|
the peer session was started."
|
|
::= { eltexBgpPeerAddrFamilyStatusEntry 3 }
|
|
|
|
eltexBgpPeerAddrFamilyStatusUpdateGroup OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index of the update group that the peer is a member of
|
|
for this AFI/SAFI.
|
|
|
|
Zero if the peer is not a member of an update group."
|
|
::= { eltexBgpPeerAddrFamilyStatusEntry 4 }
|
|
|
|
eltexBgpPeerAddrFamilyStatusResendAllRoutes OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set this to 'true' to trigger BGP to re-send all routes
|
|
to the peer for this AFI/SAFI. If the peer supports
|
|
enhanced route refresh, then this will be sent as an
|
|
unsolicited enhanced route refresh.
|
|
|
|
Setting this field will only have an effect if a BGP
|
|
session to the peer is active.
|
|
|
|
This field always has the value 'false' when read."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerAddrFamilyStatusEntry 5 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
eltexBgpPeerGroup OBJECT IDENTIFIER ::= { eltexBgpPeer 2 }
|
|
|
|
--
|
|
-- BGP Peer Group Table
|
|
--
|
|
-- This table is used to create and manage Peer Groups.
|
|
--
|
|
|
|
|
|
eltexBgpPeerGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpPeerGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of peer groups.
|
|
|
|
A peer group is a set of peers that share a common peer
|
|
group configuration.
|
|
|
|
Using peer groups simplifies peer configuration. Instead of
|
|
configuring many peers with the same set of configuration
|
|
values, you can configure a single peer group and then
|
|
assign peers to the peer group.
|
|
|
|
Each peer in a peer group has its eltexBgpPeerConfigPeerGroup value
|
|
set to the peer group index. If a peer is not in a peer group then
|
|
its eltexBgpPeerConfigPeerGroup value is 0."
|
|
::= { eltexBgpPeerGroup 1 }
|
|
|
|
eltexBgpPeerGroupEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information about the connection with
|
|
a BGP peer."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpPeerGroupName }
|
|
::= { eltexBgpPeerGroupTable 1 }
|
|
|
|
EltexBgpPeerGroupEntry ::= SEQUENCE {
|
|
eltexBgpPeerGroupName DisplayString,
|
|
eltexBgpPeerGroupRowStatus RowStatus,
|
|
eltexBgpPeerGroupRemoteAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpPeerGroupSourceInterface InterfaceIndexOrZero,
|
|
eltexBgpPeerGroupNxtHopSlf TruthValue,
|
|
eltexBgpPeerGroupConfigMaxPrfx Unsigned32,
|
|
eltexBgpPeerGroupConfigDropWarn EltexBgpConfigDropOrWarn,
|
|
eltexBgpPeerGroupMaxPrfxHold Unsigned32,
|
|
eltexBgpPeerGroupConfigThreshold Unsigned32,
|
|
eltexBgpPeerGroupConnectRetryInterval Unsigned32,
|
|
eltexBgpPeerGroupHoldTimeConfigd Unsigned32,
|
|
eltexBgpPeerGroupKeepAliveConfigd Unsigned32,
|
|
eltexBgpPeerGroupMinRouteAdvertiseInterval Unsigned32,
|
|
eltexBgpPeerGroupMinASOriginationInterval Unsigned32,
|
|
eltexBgpPeerGroupMinRouteWithdrawInterval Unsigned32,
|
|
eltexBgpPeerGroupConfigOpenDelay Unsigned32,
|
|
eltexBgpPeerGroupConfigIdleHold Unsigned32,
|
|
eltexBgpPeerGroupDistListPlIn DisplayString,
|
|
eltexBgpPeerGroupDistListPlOut DisplayString,
|
|
eltexBgpPeerGroupReflectorClient EltexBgpPeerReflectorClientType,
|
|
eltexBgpPeerGroupSoftResetWithStoredInfo TruthValue,
|
|
eltexBgpPeerGroupBfdDesired TruthValue
|
|
}
|
|
|
|
eltexBgpPeerGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The name of this eltexBgpPeerGroupEntry. This is the index of the
|
|
peer group."
|
|
::= { eltexBgpPeerGroupEntry 1 }
|
|
|
|
eltexBgpPeerGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status for this BGP peer group table entry, used to
|
|
create and destroy table entries."
|
|
::= { eltexBgpPeerGroupEntry 2 }
|
|
|
|
eltexBgpPeerGroupRemoteAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The remote autonomous system number.
|
|
|
|
For individual peers, this can be configured using
|
|
eltexBgpPeerRemoteAs.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin status DOWN and then UP, thus forcing the
|
|
peer session to be restarted. In this case, until the
|
|
peer is set admin_status DOWN, the peer will be marked as
|
|
out of date (as reported by the config state field in the
|
|
eltexBgpPeerStatusTable row for the peer)."
|
|
::= { eltexBgpPeerGroupEntry 3 }
|
|
|
|
eltexBgpPeerGroupSourceInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interface index for the interface from which the
|
|
source address for session is chosen. If non-zero, BGP
|
|
will look for the first address on this interface with a
|
|
type matching eltexBgpPeerRemoteAddrType, and use that as the
|
|
source address.
|
|
|
|
This field can be changed at any time, causing the peer to
|
|
be immediately deactivated and reactivated.
|
|
|
|
If the configured interface (or address on that interface)
|
|
did not exist when the peer was activated, and is
|
|
subsequently added, the peer will automatically use the
|
|
configured interface address. This will cause the peer to
|
|
be immediately deactivated and reactivated."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerGroupEntry 4 }
|
|
|
|
eltexBgpPeerGroupNxtHopSlf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When eltexBgpPeerGroupNxtHopSlf is 'true', routes will be
|
|
advertised to the peer with NEXT_HOP attribute set to
|
|
BGP router local address."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerGroupEntry 5 }
|
|
|
|
eltexBgpPeerGroupConfigMaxPrfx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to limit the number of prefixes that
|
|
can be accepted from this peer.
|
|
|
|
Setting eltexBgpPeerGroupConfigMaxPrfx to a non-zero value sets
|
|
the maximum number of prefixes that can be accepted from
|
|
this peer."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerGroupEntry 6 }
|
|
|
|
eltexBgpPeerGroupConfigDropWarn OBJECT-TYPE
|
|
SYNTAX EltexBgpConfigDropOrWarn
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to determine whether the session is
|
|
dropped or a warning is generated when the maximum number
|
|
of prefixes set is exceeded.
|
|
|
|
Setting eltexBgpPeerGroupConfigDropWarn to 'drop' will cause the
|
|
session to be dropped when the prefix limit is reached."
|
|
DEFVAL { warn }
|
|
::= { eltexBgpPeerGroupEntry 7 }
|
|
|
|
eltexBgpPeerGroupMaxPrfxHold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time interval in seconds between when this BGP session
|
|
is turn down due to the number of prefixes received from
|
|
this peer exceeding the maximum in
|
|
eltexBgpPeerGroupConfigMaxPrfx and when BGP attempts to
|
|
reestablish the session."
|
|
DEFVAL { 90 }
|
|
::= { eltexBgpPeerGroupEntry 8 }
|
|
|
|
eltexBgpPeerGroupConfigThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A percentage of the limit set by eltexBgpPeerGroupConfigMaxPrfx.
|
|
When the number of prefixes received from this peer reaches
|
|
this threshold, BGP issues a warning.
|
|
|
|
This field is not used if eltexBgpPeerGroupConfigMaxPrfx is set to
|
|
zero."
|
|
DEFVAL { 75 }
|
|
::= { eltexBgpPeerGroupEntry 9 }
|
|
|
|
eltexBgpPeerGroupConnectRetryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval for the ConnectRetry timer. The suggested
|
|
value for this timer is 120 seconds.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 120 }
|
|
::= { eltexBgpPeerGroupEntry 10 }
|
|
|
|
eltexBgpPeerGroupHoldTimeConfigd OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the Hold Time configured for
|
|
this BGP speaker with this peer. This value is placed in
|
|
an OPEN message sent to this peer by this BGP speaker, and
|
|
is compared with the Hold Time field in an OPEN message
|
|
received from the peer when determining the Hold Time
|
|
(eltexBgpPeerStatusHoldTime) with the peer. This value must not be
|
|
less than three seconds if it is not zero (0) in which
|
|
case the Hold Time is NOT to be established with the peer.
|
|
The value of this object is only allowed to be zero (0) if
|
|
the value of eltexBgpPeerKeepAliveConfigd is also zero (0).
|
|
The suggested value for this timer is 90 seconds.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 90 }
|
|
::= { eltexBgpPeerGroupEntry 11 }
|
|
|
|
eltexBgpPeerGroupKeepAliveConfigd OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 1..21845 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the KeepAlive configured for
|
|
this BGP speaker with this peer. The value of this object
|
|
will only determine the KEEPALIVE messages frequency
|
|
relative to the value specified in eltexBgpPeerGroupHoldTimeConfigd
|
|
the actual time interval for the KEEPALIVE messages is
|
|
indicated by eltexBgpPeerStatusKeepAlive. A reasonable
|
|
maximum value for this timer would be configured to be one
|
|
third of that of eltexBgpPeerGroupHoldTimeConfigd.
|
|
|
|
The value of this object is only allowed to be zero (0) if
|
|
the value of eltexBgpPeerGroupHoldTimeConfigd is also zero (0).
|
|
If the value of this object is zero (0), no periodical
|
|
KEEPALIVE messages are sent to the peer after the BGP
|
|
connection has been established. The suggested value for
|
|
this timer is 30 seconds.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerGroupEntry 12 }
|
|
|
|
eltexBgpPeerGroupMinRouteAdvertiseInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the
|
|
MinRouteAdvertisementInterval timer. This determines the
|
|
minimum time between a BGP UPDATE to a peer advertising or
|
|
withdrawing a route and a subsequent BGP UPDATE to the
|
|
peer advertising a route to the same destination.
|
|
|
|
The default value for this timer is 30 seconds. Its value
|
|
must not be less than eltexBgpPeerGroupMinRouteAdvertiseInterval."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerGroupEntry 13 }
|
|
|
|
eltexBgpPeerGroupMinASOriginationInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for determining the minimum amount
|
|
of time that must elapse between successive advertisements of
|
|
UPDATE messages that report changes to a route within the
|
|
advertising BGP speaker's own autonomous system. The
|
|
suggested value for this timer is 15 seconds."
|
|
DEFVAL { 15 }
|
|
::= { eltexBgpPeerGroupEntry 14 }
|
|
|
|
eltexBgpPeerGroupMinRouteWithdrawInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds for the MinRouteWithdrawInterval
|
|
timer. This is the interval which is enforced between
|
|
advertisement and subsequent withdrawal of a route.
|
|
|
|
The default value for this timer is 30 seconds. The value
|
|
must not exceed that of eltexBgpPeerGroupMinRouteAdvertiseInterval."
|
|
DEFVAL { 30 }
|
|
::= { eltexBgpPeerGroupEntry 15 }
|
|
|
|
eltexBgpPeerGroupConfigOpenDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The delay to enforce in between a TCP connection with this
|
|
peer becoming established and a BGP Open message being
|
|
sent. If this delay is zero, then no delay will be
|
|
injected, and a BGP Open message will be sent as soon as
|
|
the TCP connection allows it.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 0 }
|
|
::= { eltexBgpPeerGroupEntry 16 }
|
|
|
|
eltexBgpPeerGroupConfigIdleHold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time to hold this peer in Idle state after a BGP
|
|
session has progressed beyond Idle state initially and
|
|
then returned to it. No new connections will be initiated
|
|
or accepted until the peer comes out of Idle state. By
|
|
setting this field to a large value, this timer can be
|
|
used to provide some level of peer oscillation damping, if
|
|
desired.
|
|
|
|
This field can be changed at any time. However, if the
|
|
field is changed while the peer is admin_status UP, the
|
|
change will only take effect after the peer has been
|
|
cycled admin_status DOWN and then UP, thus forcing the
|
|
peer session to be restarted."
|
|
DEFVAL { 15 }
|
|
::= { eltexBgpPeerGroupEntry 17 }
|
|
|
|
eltexBgpPeerGroupDistListPlIn OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Prefix List name identifying the Prefix List to use
|
|
to filter routes received from the peer."
|
|
::= { eltexBgpPeerGroupEntry 18 }
|
|
|
|
eltexBgpPeerGroupDistListPlOut OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Prefix List name identifying the Prefix List to use
|
|
to filter routes advertised to the peer."
|
|
::= { eltexBgpPeerGroupEntry 19 }
|
|
|
|
eltexBgpPeerGroupReflectorClient OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerReflectorClientType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value indicates whether the given peer is a reflector
|
|
client of this router, or not. A value of nonClient(0)
|
|
indicates that this peer is not a reflector client. A
|
|
value of client(1) indicates that this peer is a reflector
|
|
client that is not fully meshed with other reflector
|
|
clients. A value of meshedClient(2) indicates that the
|
|
peer is a reflector client and is fully meshed with all
|
|
other reflector clients."
|
|
DEFVAL { nonClient }
|
|
::= { eltexBgpPeerGroupEntry 20 }
|
|
|
|
eltexBgpPeerGroupSoftResetWithStoredInfo OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This option causes all routes learned from a peer to be stored
|
|
so that the ARI can be recalculated (for example, due to a
|
|
change in import policy) without performing a route refresh or
|
|
restarting the peer session.
|
|
|
|
This field can only be changed when the peer is admin_status
|
|
DOWN.
|
|
|
|
This option overlaps with route refresh (RR) behavior. If the
|
|
option is enabled, Route refresh capability continues to be
|
|
advertized and the BGP router still responds to RR request
|
|
from the peer. However, route refresh messages will never
|
|
be sent to this peer."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerGroupEntry 21 }
|
|
|
|
eltexBgpPeerGroupBfdDesired OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether Bidirectional Forwarding Detection (BFD)
|
|
is desired for peers in this peer group.
|
|
|
|
This field can be changed at any time."
|
|
DEFVAL { false }
|
|
::= { eltexBgpPeerGroupEntry 22 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
eltexBgpRib OBJECT IDENTIFIER ::= { eltexBgpObjects 3 }
|
|
|
|
--
|
|
-- BGP Local RIB Table
|
|
--
|
|
-- This table contains per route information including routes and attributes.
|
|
-- It is ordered by route prefix and basically represent Loc-RIB table.
|
|
--
|
|
|
|
eltexBgpLocRibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpLocRibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information about paths to destination
|
|
networks received from all BGP4 peers.
|
|
|
|
This table reports routes and path attributes after import
|
|
policy has been applied. Only routes accepted by import
|
|
policy are reported."
|
|
::= { eltexBgpRib 1 }
|
|
|
|
eltexBgpLocRibEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpLocRibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a path to a network."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpLocRibAfi,
|
|
eltexBgpLocRibSafi,
|
|
eltexBgpLocRibPrfxType,
|
|
eltexBgpLocRibPrfx,
|
|
eltexBgpLocRibPrfxLen,
|
|
eltexBgpLocRibPeerOrRib,
|
|
eltexBgpLocRibPeerRibIndex,
|
|
eltexBgpLocRibPathId }
|
|
::= { eltexBgpLocRibTable 1 }
|
|
|
|
EltexBgpLocRibEntry ::= SEQUENCE {
|
|
eltexBgpLocRibAfi EltexBgpAfi,
|
|
eltexBgpLocRibSafi EltexBgpSafi,
|
|
eltexBgpLocRibPrfxType InetAddressType,
|
|
eltexBgpLocRibPrfx InetAddress,
|
|
eltexBgpLocRibPrfxLen InetAddressPrefixLength,
|
|
eltexBgpLocRibPeerOrRib EltexBgpPeerOrRib,
|
|
eltexBgpLocRibPeerRibIndex Unsigned32,
|
|
eltexBgpLocRibPathId Unsigned32,
|
|
eltexBgpLocRibBest TruthValue,
|
|
eltexBgpLocRibAsSize EltexBgpAsSize,
|
|
eltexBgpLocRibASPathStr OCTET STRING,
|
|
eltexBgpLocRibPathAttrOrigin EltexBgpOriginCode,
|
|
eltexBgpLocRibPathAttrNextHopType InetAddressType,
|
|
eltexBgpLocRibPathAttrNextHop InetAddress,
|
|
eltexBgpLocRibPathAttrMultExtDisc Unsigned32,
|
|
eltexBgpLocRibPathAttrLocalPref Unsigned32,
|
|
eltexBgpLocRibPathAttrAtomicAgg TruthValue,
|
|
eltexBgpLocRibPathAttrAggAS EltexBgpAutonomousSystemNumber,
|
|
eltexBgpLocRibPathAttrAggAddr EltexBgpIdentifier,
|
|
eltexBgpLocRibPathAttrCalcLclPref Unsigned32,
|
|
eltexBgpLocRibPathAttrOrigId EltexBgpIdentifier,
|
|
eltexBgpLocRibPathAttrWeight Unsigned32,
|
|
eltexBgpLocRibEcmp TruthValue,
|
|
eltexBgpLocRibPathAttrAsPathLimAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpLocRibPthAttAsPthLimUpper Unsigned32,
|
|
eltexBgpLocRibIsActive EltexBgpNlriIsActiveFlag,
|
|
eltexBgpLocRibPathAttrMEDPrsnt TruthValue,
|
|
eltexBgpLocRibReasonNotBest EltexBgpReasonNotBest,
|
|
eltexBgpLocRibPeerType EltexBgpNlriPeerTypes
|
|
}
|
|
|
|
eltexBgpLocRibAfi OBJECT-TYPE
|
|
SYNTAX EltexBgpAfi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address family of the prefix for this Loc-RIB route."
|
|
::= { eltexBgpLocRibEntry 1 }
|
|
|
|
eltexBgpLocRibSafi OBJECT-TYPE
|
|
SYNTAX EltexBgpSafi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The subsequent address family of the prefix for this Loc-RIB
|
|
route."
|
|
::= { eltexBgpLocRibEntry 2 }
|
|
|
|
eltexBgpLocRibPrfxType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A type of address prefix in the Network Layer Reachability
|
|
Information field."
|
|
::= { eltexBgpLocRibEntry 3 }
|
|
|
|
eltexBgpLocRibPrfx OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An address prefix in the Network Layer Reachability
|
|
Information field.
|
|
|
|
The prefix length is specified by eltexBgpLocRibPrfxLen. Any
|
|
bits beyond the length specified by eltexBgpLocRibPrfxLen are
|
|
zeroed."
|
|
::= { eltexBgpLocRibEntry 4 }
|
|
|
|
eltexBgpLocRibPrfxLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Length in bits of the IP address prefix in the Network Layer
|
|
Reachability Information field."
|
|
::= { eltexBgpLocRibEntry 5 }
|
|
|
|
eltexBgpLocRibPeerOrRib OBJECT-TYPE
|
|
SYNTAX EltexBgpPeerOrRib
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Whether this route was learned from a BGP peer or redistributed
|
|
from Routing Information Base."
|
|
::= { eltexBgpLocRibEntry 6 }
|
|
|
|
eltexBgpLocRibPeerRibIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of either the BGP peer or RIB this route was
|
|
learned from. If eltexBgpNlriPrefixPeerOrRib is peer, this field
|
|
is equivalent to a eltexBgpPeerStatusPeerIndex. If
|
|
eltexBgpNlriPrefixPeerOrRib is afm, this field is equivalent to
|
|
an internal index of RIB entity."
|
|
::= { eltexBgpLocRibEntry 7 }
|
|
|
|
eltexBgpLocRibPathId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The path ID for this NLRI.
|
|
|
|
If BGP additional path receive capability was negotiated
|
|
with the peer for this AFI/SAFI then this is the received
|
|
path ID for this NLRI, otherwise it is zero."
|
|
::= { eltexBgpLocRibEntry 8 }
|
|
|
|
eltexBgpLocRibBest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of whether or not this route was chosen as the
|
|
best BGP4 route."
|
|
::= { eltexBgpLocRibEntry 9 }
|
|
|
|
eltexBgpLocRibAsSize OBJECT-TYPE
|
|
SYNTAX EltexBgpAsSize
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether the eltexBgpLocRibASPathStr field contains two or
|
|
four byte AS numbers."
|
|
::= { eltexBgpLocRibEntry 10 }
|
|
|
|
eltexBgpLocRibASPathStr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a string depicting the autonomous system path to this
|
|
network which was received from the peer which advertised it.
|
|
Two-octet AS numbers appear as four-octet numbers by adding
|
|
two bytes of zero padding."
|
|
::= { eltexBgpLocRibEntry 11 }
|
|
|
|
eltexBgpLocRibPathAttrOrigin OBJECT-TYPE
|
|
SYNTAX EltexBgpOriginCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ultimate origin of the path information."
|
|
::= { eltexBgpLocRibEntry 12 }
|
|
|
|
eltexBgpLocRibPathAttrNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A type of nexthop address received in the UPDATE packet."
|
|
::= { eltexBgpLocRibEntry 13 }
|
|
|
|
eltexBgpLocRibPathAttrNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the border router that should be used to access
|
|
the destination network. This address is the nexthop address
|
|
received in the UPDATE packet. The address family of this
|
|
object will be the same as that of the prefix in this row."
|
|
::= { eltexBgpLocRibEntry 14 }
|
|
|
|
eltexBgpLocRibPathAttrMultExtDisc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This metric is used to discriminate between multiple exit
|
|
points to an adjacent autonomous system.
|
|
Valid only if eltexBgpLocRibPathAttrMEDPrsnt is TRUE."
|
|
::= { eltexBgpLocRibEntry 15 }
|
|
|
|
eltexBgpLocRibPathAttrLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The originating BGP4 speaker's degree of preference for an
|
|
advertised route."
|
|
::= { eltexBgpLocRibEntry 16 }
|
|
|
|
eltexBgpLocRibPathAttrAtomicAgg OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When this object is set to TRUE, the ATOMIC_AGGREGATE Path
|
|
Attribute is present and indicates that the NLRI MUST NOT
|
|
be made more specific."
|
|
::= { eltexBgpLocRibEntry 17 }
|
|
|
|
eltexBgpLocRibPathAttrAggAS OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the last BGP4 speaker that performed route
|
|
aggregation."
|
|
::= { eltexBgpLocRibEntry 18 }
|
|
|
|
eltexBgpLocRibPathAttrAggAddr OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the last BGP4 speaker that performed route
|
|
aggregation. A value of zero indicates the absence of this
|
|
attribute. Note propagation of AS of zero is illegal in
|
|
the Internet."
|
|
::= { eltexBgpLocRibEntry 19 }
|
|
|
|
eltexBgpLocRibPathAttrCalcLclPref OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The degree of preference calculated by the receiving BGP4
|
|
speaker for an advertised route."
|
|
::= { eltexBgpLocRibEntry 20 }
|
|
|
|
eltexBgpLocRibPathAttrOrigId OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Originator-ID identifying the router that initially
|
|
advertised this destination to a Route Reflector. A
|
|
value of 0.0.0.0 indicates the absence of this attribute."
|
|
::= { eltexBgpLocRibEntry 21 }
|
|
|
|
eltexBgpLocRibPathAttrWeight OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local degree of preference assigned to this route."
|
|
::= { eltexBgpLocRibEntry 22 }
|
|
|
|
eltexBgpLocRibEcmp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether or not this route was installed into the
|
|
Forwarding Table as an ECMP route (it may or may not be
|
|
the best BGP4 route advertised to BGP peers)."
|
|
::= { eltexBgpLocRibEntry 23 }
|
|
|
|
eltexBgpLocRibPathAttrAsPathLimAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the speaker that attached the AS_PATHLIMIT
|
|
attribute. A value of 0 indicates the absence of this
|
|
attribute. Note that propagation of AS of zero is illegal in
|
|
the Internet."
|
|
::= { eltexBgpLocRibEntry 24 }
|
|
|
|
eltexBgpLocRibPthAttAsPthLimUpper OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The upper bound on the number of ASes in the AS_PATH
|
|
associated with this route before the route will be filtered.
|
|
Only valid if eltexBgpLocRibPathAttrAsPathLimAs is non-zero."
|
|
::= { eltexBgpLocRibEntry 25 }
|
|
|
|
eltexBgpLocRibIsActive OBJECT-TYPE
|
|
SYNTAX EltexBgpNlriIsActiveFlag
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of whether or not this route is installed in
|
|
the forwarding table.
|
|
|
|
- 'active' if the route is installed in the forwarding
|
|
table, or is a route redistributed from another routing
|
|
protocol instance
|
|
|
|
- 'inactive' otherwise.
|
|
|
|
- 'notTracked' if BGP does not track active routes."
|
|
::= { eltexBgpLocRibEntry 26 }
|
|
|
|
eltexBgpLocRibPathAttrMEDPrsnt OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If true, then the route has an associated MED attribute,
|
|
whose value is given in eltexBgpLocRibPathAttrMultExitDisc.
|
|
If false, the route has no MED attribute, and the value of
|
|
eltexBgpLocRibPathAttrMultExitDisc is undefined."
|
|
::= { eltexBgpLocRibEntry 27 }
|
|
|
|
eltexBgpLocRibReasonNotBest OBJECT-TYPE
|
|
SYNTAX EltexBgpReasonNotBest
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If eltexBgpLocRibBest is 'true', then this field is set to
|
|
'routeIsBest'. Otherwise, it reports the stage in the
|
|
decision process when the route was determined to be
|
|
non-best.
|
|
|
|
This is the reason that the route was discarded from the
|
|
decision process. There may be other reasons why this route
|
|
is less preferred than the best route."
|
|
::= { eltexBgpLocRibEntry 28 }
|
|
|
|
eltexBgpLocRibPeerType OBJECT-TYPE
|
|
SYNTAX EltexBgpNlriPeerTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If eltexBgpLocRibPeerOrRib is peer, this field indicates
|
|
whether the source peer is an iBGP or eBGP peer. If false,
|
|
this field is set to 'none'."
|
|
::= { eltexBgpLocRibEntry 29 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
--
|
|
-- BGP Adj-Rib-In Table
|
|
--
|
|
-- This table contains per route information including routes and attributes.
|
|
-- All routes received from peers are contained within this table, regardless
|
|
-- of whether they have been accepted by policy. Routes that are
|
|
-- redistributed from other routing protocols are not present.
|
|
--
|
|
|
|
eltexBgpAdjRibInTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpAdjRibInEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The BGP-4 Adj-RIB-In Table contains information about all
|
|
paths to destination networks received from all BGP4 peers.
|
|
Paths from AFMs are not contained within this table.
|
|
|
|
This table reports received routes and path attributes before
|
|
import policy has been applied."
|
|
::= { eltexBgpRib 2 }
|
|
|
|
eltexBgpAdjRibInEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpAdjRibInEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a path to a network."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpAdjRibInPeerIndex,
|
|
eltexBgpAdjRibInAfi,
|
|
eltexBgpAdjRibInSafi,
|
|
eltexBgpAdjRibInPrfxType,
|
|
eltexBgpAdjRibInPrfx,
|
|
eltexBgpAdjRibInPrfxLen,
|
|
eltexBgpAdjRibInPathId }
|
|
::= { eltexBgpAdjRibInTable 1 }
|
|
|
|
EltexBgpAdjRibInEntry ::= SEQUENCE {
|
|
eltexBgpAdjRibInPeerIndex Unsigned32,
|
|
eltexBgpAdjRibInAfi EltexBgpAfi,
|
|
eltexBgpAdjRibInSafi EltexBgpSafi,
|
|
eltexBgpAdjRibInPrfxType InetAddressType,
|
|
eltexBgpAdjRibInPrfx InetAddress,
|
|
eltexBgpAdjRibInPrfxLen InetAddressPrefixLength,
|
|
eltexBgpAdjRibInPathId Unsigned32,
|
|
eltexBgpAdjRibInAsSize EltexBgpAsSize,
|
|
eltexBgpAdjRibInASPathStr OCTET STRING,
|
|
eltexBgpAdjRibInPathAttrOrigin EltexBgpOriginCode,
|
|
eltexBgpAdjRibInPathAttrNextHopType InetAddressType,
|
|
eltexBgpAdjRibInPathAttrNextHop InetAddress,
|
|
eltexBgpAdjRibInPathAttrMultiExitDisc Unsigned32,
|
|
eltexBgpAdjRibInPathAttrLocalPref Unsigned32,
|
|
eltexBgpAdjRibInPathAttrAtomicAggregate TruthValue,
|
|
eltexBgpAdjRibInPathAttrAggregatorAS EltexBgpAutonomousSystemNumber,
|
|
eltexBgpAdjRibInPathAttrAggregatorAddr EltexBgpIdentifier,
|
|
eltexBgpAdjRibInPathAttrOrigId EltexBgpIdentifier,
|
|
eltexBgpAdjRibInPathAttrAsPathLimAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpAdjRibInPathAttrAsPathLimUpper Unsigned32,
|
|
eltexBgpAdjRibInPathAttrMEDPrsnt TruthValue,
|
|
eltexBgpAdjRibInPathAccepted TruthValue
|
|
}
|
|
|
|
eltexBgpAdjRibInPeerIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of the BGP peer this route was learned from.
|
|
This field is equivalent to a eltexBgpPeerStatusPeerIndex."
|
|
::= { eltexBgpAdjRibInEntry 1 }
|
|
|
|
eltexBgpAdjRibInAfi OBJECT-TYPE
|
|
SYNTAX EltexBgpAfi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address family of the prefix for this Adj-RIB-In route."
|
|
::= { eltexBgpAdjRibInEntry 2 }
|
|
|
|
eltexBgpAdjRibInSafi OBJECT-TYPE
|
|
SYNTAX EltexBgpSafi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The subsequent address family of the prefix for this
|
|
Adj-RIB-In route."
|
|
::= { eltexBgpAdjRibInEntry 3 }
|
|
|
|
eltexBgpAdjRibInPrfxType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A type of address prefix in the Network Layer Reachability
|
|
Information field."
|
|
::= { eltexBgpAdjRibInEntry 4 }
|
|
|
|
eltexBgpAdjRibInPrfx OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An address prefix in the Network Layer Reachability
|
|
Information field.
|
|
|
|
The prefix length is specified by eltexBgpAdjRibInPrfxLen. Any
|
|
bits beyond the length specified by eltexBgpAdjRibInPrfxLen are
|
|
zeroed."
|
|
::= { eltexBgpAdjRibInEntry 5 }
|
|
|
|
eltexBgpAdjRibInPrfxLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Length in bits of the IP address prefix in the Network Layer
|
|
Reachability Information field."
|
|
::= { eltexBgpAdjRibInEntry 6 }
|
|
|
|
eltexBgpAdjRibInPathId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The path ID for this NLRI.
|
|
|
|
If BGP additional path receive capability was negotiated
|
|
with the peer for this AFI/SAFI then this is the received
|
|
path ID for this NLRI, otherwise it is zero."
|
|
::= { eltexBgpAdjRibInEntry 7 }
|
|
|
|
eltexBgpAdjRibInAsSize OBJECT-TYPE
|
|
SYNTAX EltexBgpAsSize
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether the eltexBgpAdjRibInASPathStr field contains two or
|
|
four byte AS numbers."
|
|
::= { eltexBgpAdjRibInEntry 8 }
|
|
|
|
eltexBgpAdjRibInASPathStr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a string depicting the autonomous system path to this
|
|
network which was received from the peer which advertised it.
|
|
Two-octet AS numbers appear as four-octet numbers by adding
|
|
two bytes of zero padding."
|
|
::= { eltexBgpAdjRibInEntry 9 }
|
|
|
|
eltexBgpAdjRibInPathAttrOrigin OBJECT-TYPE
|
|
SYNTAX EltexBgpOriginCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ultimate origin of the path information."
|
|
::= { eltexBgpAdjRibInEntry 10 }
|
|
|
|
eltexBgpAdjRibInPathAttrNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A type of the nexthop address received in the UPDATE packet."
|
|
::= { eltexBgpAdjRibInEntry 11 }
|
|
|
|
eltexBgpAdjRibInPathAttrNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the border router that should be used to access
|
|
the destination network. This address is the nexthop address
|
|
received in the UPDATE packet. The address family of this
|
|
object will be the same as that of the prefix in this row."
|
|
::= { eltexBgpAdjRibInEntry 12 }
|
|
|
|
eltexBgpAdjRibInPathAttrMultiExitDisc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This metric is used to discriminate between multiple exit
|
|
points to an adjacent autonomous system.
|
|
Valid only if eltexBgpAdjRibInPathAttrMEDPrsnt is TRUE."
|
|
::= { eltexBgpAdjRibInEntry 13 }
|
|
|
|
eltexBgpAdjRibInPathAttrLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The originating BGP4 speaker's degree of preference for an
|
|
advertised route."
|
|
::= { eltexBgpAdjRibInEntry 14 }
|
|
|
|
eltexBgpAdjRibInPathAttrAtomicAggregate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When this object is set to true, the ATOMIC_AGGREGATE Path
|
|
Attribute is present and indicates that the NLRI MUST NOT
|
|
be made more specific."
|
|
::= { eltexBgpAdjRibInEntry 15 }
|
|
|
|
eltexBgpAdjRibInPathAttrAggregatorAS OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the last BGP4 speaker that performed route
|
|
aggregation."
|
|
::= { eltexBgpAdjRibInEntry 16 }
|
|
|
|
eltexBgpAdjRibInPathAttrAggregatorAddr OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the last BGP4 speaker that performed route
|
|
aggregation. A value of zero indicates the absence of this
|
|
attribute. Note propagation of AS of zero is illegal in
|
|
the Internet."
|
|
::= { eltexBgpAdjRibInEntry 17 }
|
|
|
|
eltexBgpAdjRibInPathAttrOrigId OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Originator-ID identifying the router that initially
|
|
advertised this destination to a Route Reflector. A
|
|
value of 0.0.0.0 indicates the absence of this attribute."
|
|
::= { eltexBgpAdjRibInEntry 18 }
|
|
|
|
eltexBgpAdjRibInPathAttrAsPathLimAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the speaker that attached the AS_PATHLIMIT
|
|
attribute. A value of 0 indicates the absence of this
|
|
attribute. Note that propagation of AS of zero is illegal in
|
|
the Internet."
|
|
::= { eltexBgpAdjRibInEntry 19 }
|
|
|
|
eltexBgpAdjRibInPathAttrAsPathLimUpper OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The upper bound on the number of ASes in the AS_PATH
|
|
associated with this route before the route will be filtered.
|
|
Only valid if eltexBgpAdjRibInPathAttrAsPathLimAs is non-zero."
|
|
::= { eltexBgpAdjRibInEntry 20 }
|
|
|
|
eltexBgpAdjRibInPathAttrMEDPrsnt OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If true, then the route has an associated MED attribute,
|
|
whose value is given in eltexBgpAdjRibInPathAttMultiExitDisc.
|
|
If false, the route has no MED attribute, and the value of
|
|
eltexBgpAdjRibInPathAttMultiExitDisc is undefined."
|
|
::= { eltexBgpAdjRibInEntry 21 }
|
|
|
|
eltexBgpAdjRibInPathAccepted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If true, then the route was accepted by policy. If false it
|
|
was denied."
|
|
::= { eltexBgpAdjRibInEntry 22 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
--
|
|
-- BGP Adj-RIB Out Table
|
|
--
|
|
-- This table contains the set of routes advertised to each peer.
|
|
--
|
|
|
|
eltexBgpAdjRibOutTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpAdjRibOutEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The BGP Adj-RIB-Out Table contains the set of routes
|
|
advertised to each peer."
|
|
::= { eltexBgpRib 3 }
|
|
|
|
eltexBgpAdjRibOutEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpAdjRibOutEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a path to a network that has been
|
|
advertised to a peer. The route has been
|
|
explicitly advertised in an UPDATE message sent to the
|
|
peer, unless eltexBgpAdjRibOutLocalAggrType has the value
|
|
suppressedAggregatedRoute(4), in which case the route
|
|
has only been advertised as part of an aggregate
|
|
route."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpPeerStatusPeerIndex,
|
|
eltexBgpAdjRibOutAfi,
|
|
eltexBgpAdjRibOutSafi,
|
|
eltexBgpAdjRibOutPrfxType,
|
|
eltexBgpAdjRibOutPrfx,
|
|
eltexBgpAdjRibOutPrfxLen,
|
|
eltexBgpAdjRibOutPathId }
|
|
::= { eltexBgpAdjRibOutTable 1 }
|
|
|
|
EltexBgpAdjRibOutEntry ::= SEQUENCE {
|
|
eltexBgpAdjRibOutAfi EltexBgpAfi,
|
|
eltexBgpAdjRibOutSafi EltexBgpSafi,
|
|
eltexBgpAdjRibOutPrfxType InetAddressType,
|
|
eltexBgpAdjRibOutPrfx InetAddress,
|
|
eltexBgpAdjRibOutPrfxLen InetAddressPrefixLength,
|
|
eltexBgpAdjRibOutPathId Unsigned32,
|
|
eltexBgpAdjRibOutBest TruthValue,
|
|
eltexBgpAdjRibOutAdvertStatus INTEGER,
|
|
eltexBgpAdjRibOutLocalAggrType INTEGER,
|
|
eltexBgpAdjRibOutAsSize EltexBgpAsSize,
|
|
eltexBgpAdjRibOutASPathStr OCTET STRING,
|
|
eltexBgpAdjRibOutOrigin EltexBgpOriginCode,
|
|
eltexBgpAdjRibOutNextHopType InetAddressType,
|
|
eltexBgpAdjRibOutNextHop InetAddress,
|
|
eltexBgpAdjRibOutMultiExitDisc Unsigned32,
|
|
eltexBgpAdjRibOutLocalPref Unsigned32,
|
|
eltexBgpAdjRibOutAtomicAggregate TruthValue,
|
|
eltexBgpAdjRibOutAggregatorAS EltexBgpAutonomousSystemNumber,
|
|
eltexBgpAdjRibOutAggregatorAddr EltexBgpIdentifier,
|
|
eltexBgpAdjRibOutOrigId EltexBgpIdentifier,
|
|
eltexBgpAdjRibOutEcmp TruthValue,
|
|
eltexBgpAdjRibOutAsLimAs EltexBgpAutonomousSystemNumber,
|
|
eltexBgpAdjRibOutAsLimUpper Unsigned32,
|
|
eltexBgpAdjRibOutIsActive EltexBgpNlriIsActiveFlag,
|
|
eltexBgpAdjRibOutMEDPrsnt TruthValue,
|
|
eltexBgpAdjRibOutPeerType EltexBgpNlriPeerTypes
|
|
}
|
|
|
|
eltexBgpAdjRibOutAfi OBJECT-TYPE
|
|
SYNTAX EltexBgpAfi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address family of the prefix for this Adj-RIB Out
|
|
route."
|
|
::= { eltexBgpAdjRibOutEntry 1 }
|
|
|
|
eltexBgpAdjRibOutSafi OBJECT-TYPE
|
|
SYNTAX EltexBgpSafi
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The subsequent address family of the prefix for
|
|
this Adj-RIB Out route."
|
|
::= { eltexBgpAdjRibOutEntry 2 }
|
|
|
|
eltexBgpAdjRibOutPrfxType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A type of the address prefix in the Network Layer Reachability
|
|
Information field for this Adj-RIB Out route."
|
|
::= { eltexBgpAdjRibOutEntry 3 }
|
|
|
|
eltexBgpAdjRibOutPrfx OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An address prefix in the Network Layer Reachability
|
|
Information field for this Adj-RIB Out route.
|
|
|
|
The prefix length is specified by eltexBgpAdjRibOutPrfxLen.
|
|
Any bits beyond the length specified by
|
|
eltexBgpAdjRibOutPrfxLen are zeroed.
|
|
|
|
This field contains the full line format BGP NLRI omitting
|
|
any NLRI length field.
|
|
|
|
For SAFI 128 the NLRI includes the MPLS label and Route
|
|
Distinguisher as well as the IPv4 or IPv6 address prefix."
|
|
::= { eltexBgpAdjRibOutEntry 4 }
|
|
|
|
eltexBgpAdjRibOutPrfxLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Length in bits of the address prefix contained in the
|
|
eltexBgpAdjRibOutPrfx object."
|
|
::= { eltexBgpAdjRibOutEntry 5 }
|
|
|
|
eltexBgpAdjRibOutPathId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The path ID for this Adj-RIB Out route.
|
|
|
|
If BGP additional path send capability was negotiated with
|
|
the peer for this AFI/SAFI then this is the path ID sent for
|
|
this Adj-RIB Out route, otherwise it is zero."
|
|
::= { eltexBgpAdjRibOutEntry 6 }
|
|
|
|
eltexBgpAdjRibOutBest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of whether or not this route was chosen as the
|
|
best BGP4 route."
|
|
::= { eltexBgpAdjRibOutEntry 7 }
|
|
|
|
eltexBgpAdjRibOutAdvertStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertised(1),
|
|
suppressed(2),
|
|
pendingWithdrawal(3),
|
|
withdrawn(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the current state of
|
|
advertisement of the route to the peer.
|
|
|
|
A value of advertised(1) indicates that the route has
|
|
been advertised to the peer.
|
|
|
|
A value of suppressed(2) indicates that the route is
|
|
not currently advertised to the peer, but will be
|
|
advertised when a minimum advertisement interval timer
|
|
expires.
|
|
|
|
A value of pendingWithdrawal(3) indicates that the
|
|
route is currently advertised to the peer, but will be
|
|
withdrawn when the timer expires.
|
|
|
|
A value of withdrawn(4) indicates that the route has
|
|
been withdrawn from the peer, and this entry will be
|
|
removed from the Adj-RIB-Out on the expiry of the
|
|
timer."
|
|
::= { eltexBgpAdjRibOutEntry 8 }
|
|
|
|
eltexBgpAdjRibOutLocalAggrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAggregation(1),
|
|
aggregateRoute(2),
|
|
unsuppAggregatedRoute(3),
|
|
suppressedAggregatedRoute(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates any aggregation processing that
|
|
has been applied to this Adj-RIB-Out route.
|
|
|
|
A value of noAggregation(1) indicates that this route
|
|
does not aggregate any other routes, and is not
|
|
aggregated by any route.
|
|
|
|
A value of aggregateRoute(2) indicates that this route
|
|
is a locally configured aggregating route.
|
|
|
|
A value of unsuppAggregatedRoute(3) indicates that this
|
|
route has been aggregated by a locally configured
|
|
aggregate route and is not suppressed - the route is
|
|
still explicitly advertised to the peer.
|
|
|
|
A value of suppressedAggregatedRoute(4) indicates that
|
|
this route has been aggregated by a locally configured
|
|
aggregate route and is flagged such that it should not be
|
|
advertised along with the aggregate route. Typically such
|
|
routes are not installed on an Adj-RIB-Out. If however the
|
|
aggregate route itself is not permitted to be added to the
|
|
Adj-RIB-Out then suppressed routes are advertised if they
|
|
themselves are permitted by policy."
|
|
::= { eltexBgpAdjRibOutEntry 9 }
|
|
|
|
eltexBgpAdjRibOutAsSize OBJECT-TYPE
|
|
SYNTAX EltexBgpAsSize
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether the eltexBgpAdjRibOutASPathStr object contains
|
|
two or four byte AS numbers."
|
|
::= { eltexBgpAdjRibOutEntry 10 }
|
|
|
|
eltexBgpAdjRibOutASPathStr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a string containing the autonomous system path sent to
|
|
this peer in the AS_PATH attribute for this Adj-RIB-Out route.
|
|
Two-octet AS numbers appear as four-octet numbers by adding
|
|
two bytes of zero padding."
|
|
::= { eltexBgpAdjRibOutEntry 11 }
|
|
|
|
eltexBgpAdjRibOutOrigin OBJECT-TYPE
|
|
SYNTAX EltexBgpOriginCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ultimate origin of the path information."
|
|
::= { eltexBgpAdjRibOutEntry 12 }
|
|
|
|
eltexBgpAdjRibOutNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A type of the next hop address transmitted
|
|
in the UPDATE packet."
|
|
::= { eltexBgpAdjRibOutEntry 13 }
|
|
|
|
eltexBgpAdjRibOutNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The next hop address transmitted in the UPDATE packet.
|
|
The address family of this object is the same as that
|
|
of eltexBgpAdjRibOutPrfx."
|
|
::= { eltexBgpAdjRibOutEntry 14 }
|
|
|
|
eltexBgpAdjRibOutMultiExitDisc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This metric is used to discriminate between multiple
|
|
exit points to an adjacent autonomous system.
|
|
Valid only if eltexBgpAdjRibOutMEDPrsnt is TRUE."
|
|
::= { eltexBgpAdjRibOutEntry 15 }
|
|
|
|
eltexBgpAdjRibOutLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local preference for this Adj-RIB-Out route, as
|
|
transmitted in the UPDATE message sent to the peer."
|
|
::= { eltexBgpAdjRibOutEntry 16 }
|
|
|
|
eltexBgpAdjRibOutAtomicAggregate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When this object is set to true, the ATOMIC_AGGREGATE Path
|
|
Attribute was included in the UPDATE sent to the peer
|
|
for this Adj-RIB-Out route."
|
|
::= { eltexBgpAdjRibOutEntry 17 }
|
|
|
|
eltexBgpAdjRibOutAggregatorAS OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the last BGP4 speaker that performed
|
|
route aggregation."
|
|
::= { eltexBgpAdjRibOutEntry 18 }
|
|
|
|
eltexBgpAdjRibOutAggregatorAddr OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the last BGP4 speaker that performed
|
|
route aggregation. A value of 0.0.0.0 indicates that
|
|
this attribute was not included in the UPDATE message
|
|
sent to the peer."
|
|
::= { eltexBgpAdjRibOutEntry 19 }
|
|
|
|
eltexBgpAdjRibOutOrigId OBJECT-TYPE
|
|
SYNTAX EltexBgpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Originator-ID identifying the router that initially
|
|
advertised this destination to a Route Reflector. A
|
|
value of 0.0.0.0 indicates the absence of this
|
|
attribute."
|
|
::= { eltexBgpAdjRibOutEntry 20 }
|
|
|
|
eltexBgpAdjRibOutEcmp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether or not this route was installed into the
|
|
Forwarding Table as an ECMP route (it may or may not be
|
|
the best BGP4 route advertised to BGP peers)."
|
|
::= { eltexBgpAdjRibOutEntry 21 }
|
|
|
|
eltexBgpAdjRibOutAsLimAs OBJECT-TYPE
|
|
SYNTAX EltexBgpAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If non-zero this is the number of the AS that attached the
|
|
AS_PATHLIMIT attribute."
|
|
::= { eltexBgpAdjRibOutEntry 22 }
|
|
|
|
eltexBgpAdjRibOutAsLimUpper OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The upper bound on the number of ASes in the AS_PATH attribute
|
|
after which the route will be filtered. Only valid if
|
|
eltexBgpAdjRibOutAsLimAs is non-zero."
|
|
::= { eltexBgpAdjRibOutEntry 23 }
|
|
|
|
eltexBgpAdjRibOutIsActive OBJECT-TYPE
|
|
SYNTAX EltexBgpNlriIsActiveFlag
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of whether or not this route is installed in
|
|
the forwarding table.
|
|
|
|
- 'active' if the route is installed in the forwarding
|
|
table, or is a route redistributed from another routing
|
|
protocol instance
|
|
|
|
- 'inactive' otherwise.
|
|
|
|
- 'notTracked' if BGP does not track active routes."
|
|
::= { eltexBgpAdjRibOutEntry 24 }
|
|
|
|
eltexBgpAdjRibOutMEDPrsnt OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If true, then the route has an associated MED attribute,
|
|
whose value is given in eltexBgpAdjRibOutMultiExitDisc.
|
|
If false, the route has no MED attribute, and the value of
|
|
eltexBgpAdjRibOutMultiExitDisc is undefined."
|
|
::= { eltexBgpAdjRibOutEntry 25 }
|
|
|
|
eltexBgpAdjRibOutPeerType OBJECT-TYPE
|
|
SYNTAX EltexBgpNlriPeerTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This field indicates whether the source peer is an iBGP or
|
|
eBGP peer."
|
|
::= { eltexBgpAdjRibOutEntry 26 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
--
|
|
-- BGP Network Table
|
|
--
|
|
-- This table contains the set of internal routes BGP advertised to each peer.
|
|
--
|
|
|
|
eltexBgpNetworkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpNetworkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BGP network configuration table.
|
|
|
|
This table allows a user to configure internal networks
|
|
advertised via BGP."
|
|
::= { eltexBgpRib 4 }
|
|
|
|
eltexBgpNetworkEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpNetworkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information about the internal network
|
|
announced via BGP."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpNetworkAfi,
|
|
eltexBgpNetworkSafi,
|
|
eltexBgpNetworkPrfxType,
|
|
eltexBgpNetworkPrfx,
|
|
eltexBgpNetworkPrfxLen }
|
|
::= { eltexBgpNetworkTable 1 }
|
|
|
|
EltexBgpNetworkEntry ::= SEQUENCE {
|
|
eltexBgpNetworkAfi EltexBgpAfi,
|
|
eltexBgpNetworkSafi EltexBgpSafi,
|
|
eltexBgpNetworkPrfxType InetAddressType,
|
|
eltexBgpNetworkPrfx InetAddress,
|
|
eltexBgpNetworkPrfxLen InetAddressPrefixLength,
|
|
eltexBgpNetworkRowStatus RowStatus
|
|
}
|
|
|
|
eltexBgpNetworkAfi OBJECT-TYPE
|
|
SYNTAX EltexBgpAfi
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The address family of the prefix for this route."
|
|
DEFVAL { ipv4 }
|
|
::= { eltexBgpNetworkEntry 1 }
|
|
|
|
eltexBgpNetworkSafi OBJECT-TYPE
|
|
SYNTAX EltexBgpSafi
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The subsequent address family of the prefix for this
|
|
route."
|
|
DEFVAL { unicast }
|
|
::= { eltexBgpNetworkEntry 2 }
|
|
|
|
eltexBgpNetworkPrfxType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A type of address prefix."
|
|
::= { eltexBgpNetworkEntry 3 }
|
|
|
|
eltexBgpNetworkPrfx OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An address prefix."
|
|
::= { eltexBgpNetworkEntry 4 }
|
|
|
|
eltexBgpNetworkPrfxLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Length in bits of the address prefix contained in the
|
|
eltexBgpNetworkPrfx object."
|
|
::= { eltexBgpNetworkEntry 5 }
|
|
|
|
eltexBgpNetworkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status for this BGP Network Table entry, used to
|
|
create and destroy table entries."
|
|
::= { eltexBgpNetworkEntry 6 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
--
|
|
-- Path Attribute Extensions
|
|
--
|
|
|
|
eltexBgpPathAttrExtensions OBJECT IDENTIFIER ::= { eltexBgpRib 5 }
|
|
|
|
--
|
|
-- Path Attribute Route Reflection Extensions
|
|
--
|
|
|
|
eltexBgpPathAttrRouteReflectionExts OBJECT IDENTIFIER ::= { eltexBgpPathAttrExtensions 1 }
|
|
|
|
|
|
--
|
|
-- Cluster table
|
|
--
|
|
-- This table holds the clusters passed through on a given path.
|
|
--
|
|
|
|
eltexBgpPathAttrClusterLocTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EltexBgpPathAttrClusterLocEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The BGP-4 Path Attribute Cluster Table contains the per
|
|
network path (NLRI) data on the reflection path which a
|
|
route has traversed. The absence of row data for a given
|
|
network path indicates a lack of this attribute information
|
|
for the indicated network path.
|
|
|
|
This table reports received routes and path attributes after
|
|
import policy has been applied. Only routes accepted by
|
|
import policy are reported."
|
|
::= { eltexBgpPathAttrRouteReflectionExts 1 }
|
|
|
|
eltexBgpPathAttrClusterLocEntry OBJECT-TYPE
|
|
SYNTAX EltexBgpPathAttrClusterLocEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a cluster traversal provided with a path to
|
|
a network."
|
|
INDEX { eltexBgpProcessId,
|
|
eltexBgpLocRibPeerOrRib,
|
|
eltexBgpLocRibPeerRibIndex,
|
|
eltexBgpLocRibAfi,
|
|
eltexBgpLocRibSafi,
|
|
eltexBgpLocRibPrfx,
|
|
eltexBgpLocRibPrfxLen,
|
|
eltexBgpLocRibPathId,
|
|
eltexBgpPathAttrClusterLocIndex }
|
|
::= { eltexBgpPathAttrClusterLocTable 1 }
|
|
|
|
|
|
EltexBgpPathAttrClusterLocEntry ::= SEQUENCE {
|
|
eltexBgpPathAttrClusterLocIndex Unsigned32,
|
|
eltexBgpPathAttrClusterLocValue Unsigned32
|
|
}
|
|
|
|
eltexBgpPathAttrClusterLocIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An integral index for a row in this table."
|
|
::= { eltexBgpPathAttrClusterLocEntry 1 }
|
|
|
|
eltexBgpPathAttrClusterLocValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A four octet long value representing a part of the
|
|
reflection path that the route has passed. Each such four
|
|
octet long value represents the ID of a cluster that
|
|
the route has traversed. The sequence of this path as
|
|
received in the route advertisement will be preserved in
|
|
the sequence of eltexBgpPathAttrClusterTable rows (and the
|
|
eltexBgpLocPathAttrClusterValue's in each row) as returned for a given
|
|
network path, and the monotonically increasing sequence of
|
|
eltexBgpLocPathAttrClusterIndex values for that network path."
|
|
::= { eltexBgpPathAttrClusterLocEntry 2 }
|
|
|
|
END
|