WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/edgecore/ES4528V-MIB

9384 lines
354 KiB
Plaintext
Raw Permalink Blame History

--------------------------------------------------
--Version Number: 20060410001
--------------------------------------------------
ES4528V-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32,IpAddress,
NOTIFICATION-TYPE, enterprises
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue
FROM SNMPv2-TC
MacAddress
FROM TOKEN-RING-RMON-MIB
PortList, VlanIndex
FROM Q-BRIDGE-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndex, ifIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
BridgeId, Timeout, dot1dStpPort,dot1dStpPortEntry, MacAddress
FROM BRIDGE-MIB
-- dot1xAuthConfigEntry
-- FROM IEEE8021-PAE-MIB
Timeout
FROM BRIDGE-MIB;
accton OBJECT IDENTIFIER ::= { enterprises 259 }
--snmpMgt OBJECT IDENTIFIER ::= { accton 6 }
--cheetahSwitchMgt OBJECT IDENTIFIER ::= { snmpMgt 10 }
edgecore OBJECT IDENTIFIER ::= { accton 8 }
cheetahSwitchMgt OBJECT IDENTIFIER ::= { edgecore 1 }
ES4528VMIB MODULE-IDENTITY
LAST-UPDATED "200109060000Z"
ORGANIZATION "Accton Technology Corp."
CONTACT-INFO
"Accton Technology Corp.
Customer Service
Postal: No. 1 Creation Rd. III,
Science-based Industrial Park,Hsinchu 300-77,
Taiwan, R.O.C.
Tel: +886-3-5770270
E-mail: support@accton.com.tw"
DESCRIPTION
"The MIB module for ES3526XA/ES3510."
REVISION "200109060000Z"
DESCRIPTION
"Initial version of this MIB."
::= { cheetahSwitchMgt 10 }
ES4528VMIBObjects OBJECT IDENTIFIER ::= { ES4528VMIB 1 }
ES4528VNotifications OBJECT IDENTIFIER ::= { ES4528VMIB 2 }
ES4528VConformance OBJECT IDENTIFIER ::= { ES4528VMIB 3 }
--supported groups
switchMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 1 }
portMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 2 }
trunkMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 3 }
lacpMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 4 }
staMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 5 }
--tftpMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 6 }
restartMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 7 }
--mirrorMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 8 }
--igmpSnoopMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 9 }
--ipMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 10 }
--bcastStormMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 11 }
vlanMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 12 }
--priorityMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 13 }
--trapDestMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 14 }
--qosMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 16 }
--securityMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 17 }
--sysLogMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 19 }
--lineMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 20 }
sysTimeMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 23 }
fileMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 24 }
--dnsMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 26 }
--mvrMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 44 }
--dhcpSnoopMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 46 }
--clusterMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 47 }
--ipSrcGuardMgt OBJECT IDENTIFIER ::= { ES4528VMIBObjects 48 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
KeySegment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The total length of the key is 1024 characters,
it is divided into 8 parts and stored in 8 separated mib
variables as below:
Key1: part 1 of the key (1-128)
Key2: part 2 of the key (129-256)
Key3: part 3 of the key (257-384)
Key4: part 4 of the key (385-512)
Key5: part 5 of the key (513-640)
Key6: part 6 of the key (641-768)
Key7: part 7 of the key (769-896)
Key8: part 8 of the key (897-1024)
Please note that if the key string is less then 1024 characters,
the remaining part of the string will be filled by a zero-length string.
For example, if the length of the key is 129,
we will get a string of length 128 in Key1, and
a string of length 1 in Key2,
moreover, Key3 to Key8 will all be zero-length strings."
SYNTAX DisplayString(SIZE(0..128))
ValidStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two values. Setting it to valid(1) creates an entry.
Setting it to invalid(2) destroys an entry."
SYNTAX INTEGER { valid(1), invalid(2) }
StaPathCostMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The path cost mode of a spanning tree algorithm, short(1) indicates
that we retrieve/configure the spanning tree path cost as a 16 bit
value and long(2) indicates that we retrieve/configure the spanning
tree path cost as a 32 bit value."
SYNTAX INTEGER { short(1), long(2) }
--
-- switchMgt
--
switchManagementVlan OBJECT-TYPE
SYNTAX INTEGER (1..4092)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN on which management is done."
::= { switchMgt 1 }
switchNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of switches present on this system."
::= { switchMgt 2 }
switchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
switches in this system."
::= { switchMgt 3 }
switchInfoEntry OBJECT-TYPE
SYNTAX SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about a single switch in this system. The value
is always equal 1 in ES4528V product."
INDEX { swUnitIndex }
::= { switchInfoTable 1 }
SwitchInfoEntry ::= SEQUENCE
{
swUnitIndex Integer32,
swHardwareVer DisplayString,
swMicrocodeVer DisplayString,
swLoaderVer DisplayString,
swBootRomVer DisplayString,
swOpCodeVer DisplayString,
swPortNumber Integer32,
swPowerStatus INTEGER,
swRoleInSystem INTEGER,
swSerialNumber DisplayString,
-- swExpansionSlot1 INTEGER,
-- swExpansionSlot2 INTEGER,
swServiceTag DisplayString
}
swUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchInfoEntry 1 }
swHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the main board."
::= { switchInfoEntry 2 }
swMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the main board."
::= { switchInfoEntry 3 }
swLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the main board."
::= { switchInfoEntry 4 }
swBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the main board."
::= { switchInfoEntry 5 }
swOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the main board."
::= { switchInfoEntry 6 }
swPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total port number of this switch
(including expansion slot)."
::= { switchInfoEntry 7 }
swPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
redundantPower(2),
internalAndRedundantPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch using internalPower(1),
redundantPower(2) or both(3)"
::= { switchInfoEntry 8 }
swRoleInSystem OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
backupMaster(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system."
::= { switchInfoEntry 9 }
swSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the switch."
::= { switchInfoEntry 10 }
-- swExpansionSlot1 OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- notPresent(1),
-- other(2),
-- hundredBaseFxScMmf(3),
-- hundredBaseFxScSmf(4),
-- hundredBaseFxMtrjMmf(5),
-- thousandBaseSxScMmf(6),
-- thousandBaseSxMtrjMmf(7),
-- thousandBaseXGbic(8),
-- thousandBaseLxScSmf(9),
-- thousandBaseT(10),
-- stackingModule(11),
-- thousandBaseSfp(12),
-- tenHundredBaseT4port(13),
-- tenHundredBaseFxMtrj4port(14),
-- comboStackingSfp(15),
-- tenHundredBaseT(16)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Type of expansion module in this switch slot 1."
-- ::= { switchInfoEntry 11 }
--swExpansionSlot2 OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- notPresent(1),
-- other(2),
-- hundredBaseFxScMmf(3),
-- hundredBaseFxScSmf(4),
-- hundredBaseFxMtrjMmf(5),
-- thousandBaseSxScMmf(6),
-- thousandBaseSxMtrjMmf(7),
-- thousandBaseXGbic(8),
-- thousandBaseLxScSmf(9),
-- thousandBaseT(10),
-- stackingModule(11),
-- thousandBaseSfp(12),
-- tenHundredBaseT4port(13),
-- tenHundredBaseFxMtrj4port(14),
-- comboStackingSfp(15),
-- tenHundredBaseT(16)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Type of expansion module in this switch slot 2."
-- ::= { switchInfoEntry 12 }
swServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service tag serial-number of the switch."
::= { switchInfoEntry 13 }
switchOperState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unknown(2),
ok(3),
noncritical(4),
critical(5),
nonrecoverable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global operation state of the switch."
::= { switchMgt 4 }
switchProductId OBJECT IDENTIFIER ::= { switchMgt 5 }
swProdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { switchProductId 1 }
swProdManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { switchProductId 2 }
swProdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { switchProductId 3 }
swProdVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { switchProductId 4 }
swProdUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { switchProductId 5 }
swIdentifier OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A unique identifier of which switch in the chassis is currently
being looked at."
::= { switchProductId 6 }
swChassisServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The service tag of the chassis this switch resides in."
::= { switchProductId 7 }
--switchIndivPowerTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwitchIndivPowerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table about statuses of individual powers."
-- ::= { switchMgt 6 }
--
--switchIndivPowerEntry OBJECT-TYPE
-- SYNTAX SwitchIndivPowerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table about statuses of individual powers."
-- INDEX { swIndivPowerUnitIndex, swIndivPowerIndex }
-- ::= { switchIndivPowerTable 1 }
--
--SwitchIndivPowerEntry ::= SEQUENCE
--{
-- swIndivPowerUnitIndex Integer32,
-- swIndivPowerIndex INTEGER,
-- swIndivPowerStatus INTEGER
--}
--
--swIndivPowerUnitIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This is defined as swUnitIndex."
-- ::= { switchIndivPowerEntry 1 }
--
--swIndivPowerIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..2)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "1 means internal power. 2 means external power."
-- ::= { switchIndivPowerEntry 2 }
--
--swIndivPowerStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- notPresent(1),
-- green(2),
-- red(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "notPresent(1) means not present. green(2) means
-- up. red(3) means down."
-- ::= { switchIndivPowerEntry 3 }
amtrMgt OBJECT IDENTIFIER ::= { switchMgt 8 }
-- Address Management
amtrMacAddrAgingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If this is enabled(1), the MAC address table will age out according to
its timer. If this is disabled(2), the MAC address table will not
age out."
::= { amtrMgt 3 }
--
-- portMgt
--
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel)."
::= { portMgt 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one switch port of the switch."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::= SEQUENCE
{
portIndex Integer32,
portName DisplayString,
portType INTEGER,
portSpeedDpxCfg INTEGER,
portFlowCtrlCfg INTEGER,
portCapabilities BITS,
portAutonegotiation INTEGER,
portSpeedDpxStatus INTEGER,
portFlowCtrlStatus INTEGER,
portTrunkIndex Integer32
}
portIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as ifIndex in the IF-MIB."
::= { portEntry 1 }
portName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later)."
::= { portEntry 2 }
portType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hundredBaseTX(2),
hundredBaseFX(3),
thousandBaseSX(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
thousandBaseSfp(8),
hundredBaseFxScSingleMode(9),
hundredBaseFxScMultiMode(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port type."
::= { portEntry 3 }
portSpeedDpxCfg OBJECT-TYPE
SYNTAX INTEGER
{
reserved(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."
DEFVAL { halfDuplex10 }
::= { portEntry 4 }
portFlowCtrlCfg OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
-- backPressure(3),
-- dot3xFlowControl(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled."
-- (3) Flow control mechanism is backPressure.
-- when the port is in fullDuplex mode.This flow control
-- mechanism will not function.
-- (4) Flow control mechanism is IEEE 802.3x flow control.
-- when the port is in halfDuplex mode.This flow control
-- mechanism will not function.
-- hundredBaseTX and thousandBaseSX port can be set as:
-- enabled(1),
-- disabled(2),
-- backPressure(3),
-- dot3xFlowControl(4).
-- hundredBaseFX port can be set as:
-- enabled(1),
-- disabled(2),
-- backPressure(3).
-- The actual flow control mechanism is used given by
-- portFlowCtrlStatus."
DEFVAL { enabled }
::= { portEntry 5 }
portCapabilities OBJECT-TYPE
SYNTAX BITS
{
portCap10half(0),
portCap10full(1),
portCap100half(2),
portCap100full(3),
portCap1000half(4),
portCap1000full(5),
reserved6(6),
reserved7(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
portCapSym(14),
portCapFlowCtrl(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port capabilities."
::= { portEntry 6 }
portAutonegotiation OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether autonegotiation is enabled."
::= { portEntry 7 }
portSpeedDpxStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1)."
::= { portEntry 8 }
portFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
backPressure(2),
dot3xFlowControl(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1)."
::= { portEntry 9 }
portTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex, defined by the
corresponding trunkPorts."
::= { portEntry 10 }
--
-- trunkMgt
--
trunkMaxId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number for a trunk identifier."
::= { trunkMgt 1 }
trunkValidNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid trunks."
::= { trunkMgt 2 }
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
configuration of each trunk,
similar to Cisco EtherChannel."
::= { trunkMgt 3 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one trunk of the switch."
INDEX { trunkIndex }
::= { trunkTable 1 }
TrunkEntry ::= SEQUENCE
{
trunkIndex Integer32,
trunkPorts PortList,
trunkCreation INTEGER,
trunkStatus ValidStatus
}
trunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the trunk within the switch
for which this entry contains information."
::= { trunkEntry 1 }
trunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this trunk."
::= { trunkEntry 2 }
trunkCreation OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk."
::= { trunkEntry 3 }
--trunkStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Writing this to valid(1) creates an entry.
-- Writing this to invalid(2) destroys an entry.
-- A trunk created by LACP cannot be manually destroyed
-- or (re)configured."
-- ::= { trunkEntry 4 }
---
--- lacpMgt
---
lacpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for LACP port configuration."
::= { lacpMgt 1 }
lacpPortEntry OBJECT-TYPE
SYNTAX LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for LACP port configuration."
INDEX { lacpPortIndex }
::= { lacpPortTable 1 }
LacpPortEntry ::= SEQUENCE
{
lacpPortIndex Integer32,
lacpPortStatus INTEGER
}
lacpPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as ifIndex in the IF-MIB."
::= { lacpPortEntry 1 }
lacpPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether 802.3ad LACP is enabled."
::= { lacpPortEntry 2 }
--
-- staMgt
--
-- Management for Spanning Tree Algorithm (STA).
-- This has variables not already defined in the implemented
-- standard MIB(s).
-- for 1d(STP) start
staSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staMgt 1 }
-- for 1d(STP) end
staPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType."
REFERENCE "IEEE 802.1d, IEEE 802.1w, IEEE 802.1s."
::= { staMgt 2 }
staPortEntry OBJECT-TYPE
SYNTAX StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual entry of staPortTable."
INDEX { staPortIndex }
::= { staPortTable 1 }
StaPortEntry ::= SEQUENCE
{
staPortIndex Integer32,
-- for 1d(STP) start
staPortFastForward EnabledStatus,
-- for 1d(STP) end
-- for 1w(RSTP) start
staPortProtocolMigration TruthValue,
staPortAdminEdgePort TruthValue,
staPortOperEdgePort TruthValue,
staPortAdminPointToPoint INTEGER,
staPortOperPointToPoint TruthValue,
staPortLongPathCost Integer32,
staPortSystemStatus EnabledStatus
-- for 1w(RSTP) end
}
staPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk member ports)
interface of the staPortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dStpPort in the
BRIDGE-MIB."
::= { staPortEntry 1 }
-- for 1d(STP) start
staPortFastForward OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether fast forwarding is enabled."
::= { staPortEntry 2 }
-- for 1d(STP) end
-- for 1w(RSTP) start
staPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { staPortEntry 3 }
staPortAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.3"
::= { staPortEntry 4 }
staPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { staPortEntry 5 }
staPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER
{
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 6 }
staPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 7 }
staPortLongPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 8 }
staPortSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staPortEntry 9 }
staProtocolType OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. Here LEO doesn't support 'mstp(3)'
New values may be defined in the future as new or updated versions of the
protocol become available."
REFERENCE
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
::= { staMgt 3 }
staTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
REFERENCE
"IEEE 802.1w clause 17.16.6"
DEFVAL { 3 }
::= { staMgt 4 }
staPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used."
DEFVAL { short }
::= { staMgt 5}
-- for 1w(RSTP) end
-- for 1s(MSTP) start
--
-- xstMgt
--
xstMgt OBJECT IDENTIFIER ::= { staMgt 6}
mstName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the Multiple Spanning Tree region."
::= { xstMgt 1 }
mstRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Revision number of the Multiple Spanning Tree region."
::= { xstMgt 2 }
mstMaxHops OBJECT-TYPE
SYNTAX Integer32(1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The max hop number counts of the Multiple Spanning Tree region."
::= { xstMgt 3 }
xstInstanceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0."
::= { xstMgt 4 }
xstInstanceCfgEntry OBJECT-TYPE
SYNTAX XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the property of the RST or MST instance."
INDEX { xstInstanceCfgIndex }
::= { xstInstanceCfgTable 1 }
XstInstanceCfgEntry ::= SEQUENCE
{
xstInstanceCfgIndex Integer32,
xstInstanceCfgPriority Integer32,
xstInstanceCfgTimeSinceTopologyChange TimeTicks,
xstInstanceCfgTopChanges Integer32,
xstInstanceCfgDesignatedRoot BridgeId,
xstInstanceCfgRootCost Integer32,
xstInstanceCfgRootPort Integer32,
xstInstanceCfgMaxAge Timeout,
xstInstanceCfgHelloTime Timeout,
xstInstanceCfgHoldTime Timeout,
xstInstanceCfgForwardDelay Timeout,
xstInstanceCfgBridgeMaxAge Timeout,
xstInstanceCfgBridgeHelloTime Timeout,
xstInstanceCfgBridgeForwardDelay Timeout,
xstInstanceCfgTxHoldCount Integer32,
xstInstanceCfgPathCostMethod StaPathCostMode
}
xstInstanceCfgIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {xstInstanceCfgEntry 1 }
xstInstanceCfgPriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096."
::= { xstInstanceCfgEntry 2 }
xstInstanceCfgTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST."
::= { xstInstanceCfgEntry 3 }
xstInstanceCfgTopChanges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized."
::= { xstInstanceCfgEntry 4 }
xstInstanceCfgDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identifier parameter in
all configuration bridge PDUs originated by this node."
REFERENCE "IEEE 802.1w."
::= { xstInstanceCfgEntry 5 }
xstInstanceCfgRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cost of the path to the root as seen from
this bridge of the RST or MST."
::= { xstInstanceCfgEntry 6 }
xstInstanceCfgRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST."
::= { xstInstanceCfgEntry 7 }
xstInstanceCfgMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using."
::= { xstInstanceCfgEntry 8 }
xstInstanceCfgHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using in RST or MST."
::= { xstInstanceCfgEntry 9 }
xstInstanceCfgHoldTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { xstInstanceCfgEntry 10 }
xstInstanceCfgForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the port
stays in each of the listening and learning
states, which precede the forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the forwarding database. This value is the
current value being used by the bridge.
xstInstanceCfgBridgeForwardDelay defines the value that
this bridge and all others would start using
if/when this bridge were to become the root."
::= { xstInstanceCfgEntry 11 }
xstInstanceCfgBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value of
xstInstanceCfgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 12 }
xstInstanceCfgBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 13 }
xstInstanceCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of
xstInstanceCfgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 14 }
xstInstanceCfgTxHoldCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate."
::= { xstInstanceCfgEntry 15 }
xstInstanceCfgPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used."
::= { xstInstanceCfgEntry 16 }
xstInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration."
::= { xstMgt 5 }
xstInstancePortEntry OBJECT-TYPE
SYNTAX XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for xstInstancePortTable."
INDEX { xstInstancePortInstance, xstInstancePortPort }
::= { xstInstancePortTable 1 }
XstInstancePortEntry ::= SEQUENCE
{
xstInstancePortInstance Integer32,
xstInstancePortPort Integer32,
xstInstancePortPriority Integer32,
xstInstancePortState INTEGER,
xstInstancePortEnable EnabledStatus,
xstInstancePortPathCost Integer32,
xstInstancePortDesignatedRoot BridgeId,
xstInstancePortDesignatedCost Integer32,
xstInstancePortDesignatedBridge BridgeId,
xstInstancePortDesignatedPort OCTET STRING,
xstInstancePortForwardTransitions Counter32,
xstInstancePortPortRole INTEGER
}
xstInstancePortInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The instance of the MSTP."
::= { xstInstancePortEntry 1 }
xstInstancePortPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk member ports)
interface of the mstInstancePortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dStpPort in the BRIDGE-MIB."
::= { xstInstancePortEntry 2 }
xstInstancePortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active link
in the Spanning Tree. This makes a port with higher
priority less likely to be blocked if the Spanning Tree
Algorithm is detecting network loops. Where more than one
port is assigned the highest priority, the port with
lowest numeric identifier will be enabled."
::= { xstInstancePortEntry 3 }
xstInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
discarding(1),
learning(2),
forwarding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1)."
::= { xstInstancePortEntry 4}
xstInstancePortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enabled/disabled status of the port."
::= { xstInstancePortEntry 5 }
xstInstancePortPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The pathcost of the RST or MST in the range 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 6 }
xstInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached."
::= { xstInstancePortEntry 7 }
xstInstancePortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs."
::= { xstInstancePortEntry 8 }
xstInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment."
::= { xstInstancePortEntry 9 }
xstInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of the port on the designated
bridge for this port's segment."
::= { xstInstancePortEntry 10 }
xstInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the learning state to the forwarding state."
::= { xstInstancePortEntry 11 }
xstInstancePortPortRole OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
root(2),
designated(3),
alternate(4),
backup(5),
master(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role."
::= { xstInstancePortEntry 12 }
mstInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable."
::= { xstMgt 6 }
mstInstanceEditEntry OBJECT-TYPE
SYNTAX MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceEditIndex }
::= { mstInstanceEditTable 1 }
MstInstanceEditEntry ::= SEQUENCE
{
mstInstanceEditIndex Integer32,
mstInstanceEditVlansMap OCTET STRING,
mstInstanceEditVlansMap2k OCTET STRING,
mstInstanceEditVlansMap3k OCTET STRING,
mstInstanceEditVlansMap4k OCTET STRING,
mstInstanceEditRemainingHops Integer32
}
mstInstanceEditIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceEditEntry 1 }
mstInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 2 }
mstInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 3 }
mstInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 4 }
mstInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 5 }
mstInstanceEditRemainingHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remaining hop count for this MST instance."
::= { mstInstanceEditEntry 6 }
--mstInstanceOperTable
mstInstanceOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan mapped table."
::= { xstMgt 7 }
mstInstanceOperEntry OBJECT-TYPE
SYNTAX MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceOperIndex }
::= { mstInstanceOperTable 1 }
MstInstanceOperEntry ::= SEQUENCE
{
mstInstanceOperIndex Integer32,
mstInstanceOperVlansMap OCTET STRING,
mstInstanceOperVlansMap2k OCTET STRING,
mstInstanceOperVlansMap3k OCTET STRING,
mstInstanceOperVlansMap4k OCTET STRING
}
mstInstanceOperIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceOperEntry 1 }
mstInstanceOperVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 2 }
mstInstanceOperVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 3 }
mstInstanceOperVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 4 }
mstInstanceOperVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 5 }
-- for 1s(MSTP) end
--
-- tftpMgt
--
--tftpFileType OBJECT-TYPE
-- SYNTAX INTEGER {
-- opcode(1),
-- config(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Type of file to transfer."
-- ::= { tftpMgt 1 }
--
--tftpSrcFile OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..32))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The source file name for TFTP transfer when a
-- transfer is next requested via this MIB. This value is set to
-- the zero length string when no file name has been specified."
-- ::= { tftpMgt 2 }
--
--tftpDestFile OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..32))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The destination file name for TFTP transfer when a
-- transfer is next requested via this MIB. This value is set to
-- the zero length string when no file name has been specified."
-- ::= { tftpMgt 3 }
--
--tftpServer OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The IP address of the TFTP server for transfer
-- when a download is next requested via this MIB.
-- This value is set to `0.0.0.0' when no IP address has been
-- specified."
-- ::= { tftpMgt 4 }
--
--tftpAction OBJECT-TYPE
-- SYNTAX INTEGER {
-- notDownloading(1),
-- downloadToPROM(2),
-- downloadToRAM(3),
-- upload(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "When this object is set to downloadToRAM(3) or
-- downloadToPROM(2), the device will discontinue its
-- normal operation and begin download of the file specified
-- by tftpSrcFile from the server specified by
-- tftpServer to tftpDestFile in the device
-- using the TFTP protocol. If
-- downloadToRAM(3) is specified, the new image is copied
-- to RAM only (the old image remains unaltered in the flash
-- EPROM). If downloadToPROM(2) is specified
-- the new image is written to the flash EPROM
-- memory after its checksum has been verified to be correct.
-- When the download process is completed, the device will
-- warm boot to restart the newly loaded application.
-- When the device is not downloading, this object will have
-- a value of notDownloading(1).
-- downloadToRAM(3) applies only to configuration download.
-- Otherwise 'invalid value' is replied.
-- When this object is set to upload(4), the device will begin
-- upload of the file specified by tftpScrFile in the device
-- to tftpDestFile in the server specified by tftpServer."
-- ::= { tftpMgt 5 }
--
-- tftpStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- tftpSuccess(1),
-- tftpStatusUnknown(2),
-- tftpGeneralError(3),
-- tftpNoResponseFromServer(4),
-- tftpDownloadChecksumError(5),--download only
-- tftpDownloadIncompatibleImage(6),--download only
-- tftpTftpFileNotFound(7),
-- tftpTftpAccessViolation(8)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The status of the last transfer procedure, if any. This
-- object will have a value of downloadStatusUnknown(2) if no
-- transfer process has been performed."
-- ::= { tftpMgt 6 }
--
-- restartMgt
--
-- restartOpCodeFile OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..32))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Name of op-code file for start-up."
-- ::= { restartMgt 1 }
-- restartConfigFile OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..32))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Name of configuration file for start-up."
-- ::= { restartMgt 2 }
restartControl OBJECT-TYPE
SYNTAX INTEGER {
running(1),
warmBoot(2),
coldBoot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to warmBoot(2) causes the device to
restart the application software with current configuration
parameters saved in non-volatile memory. Setting this
object to coldBoot(3) causes the device to reinitialize
configuration parameters in non-volatile memory to default
values and restart the application software. When the device
is running normally, this variable has a value of
running(1)."
::= { restartMgt 3 }
--
-- mirrorMgt
--
-- mirrorTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MirrorEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table of descriptive and status information about
-- switches in this system."
-- ::= { mirrorMgt 1 }
--
-- mirrorEntry OBJECT-TYPE
-- SYNTAX MirrorEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An entry in the table, containing information
-- about a single switch in this system. "
-- INDEX { mirrorDestinationPort, mirrorSourcePort }
-- ::= { mirrorTable 1 }
--
-- MirrorEntry ::= SEQUENCE
-- {
-- mirrorDestinationPort Integer32,
-- mirrorSourcePort Integer32,
-- mirrorType INTEGER,
-- mirrorStatus ValidStatus
-- }
--
-- mirrorDestinationPort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Destination port for mirrored packets. This is defined
-- as ifIndex in the IF-MIB."
-- ::= { mirrorEntry 1 }
--
-- mirrorSourcePort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Source port for mirrored packets. This is defined as
-- ifIndex in the IF-MIB."
-- ::= { mirrorEntry 2 }
--
-- mirrorType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- rx(1),
-- tx(2),
-- both(3)
--
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If this value is rx(1), receive packets will
-- be mirrored. If this value is tx(2), transmit
-- packets will be mirrored. If this value is both(3),
-- receive and transmit packets will be mirrored."
-- ::= { mirrorEntry 3 }
--
-- mirrorStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { mirrorEntry 4 }
--
-- --
-- -- igmpSnoopMgt
-- --
--
-- igmpSnoopStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
-- When enabled, the device will examine IGMP packets and set
-- up filters for IGMP ports. "
-- DEFVAL { enabled }
-- ::= { igmpSnoopMgt 1 }
--
-- igmpSnoopQuerier OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether to act as querier."
-- DEFVAL { enabled }
-- ::= { igmpSnoopMgt 2 }
--
-- igmpSnoopQueryCount OBJECT-TYPE
-- SYNTAX INTEGER (2..10)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Maximum number of queries that have not been heard on the
-- system before the system starts taking action to solicit
-- reports."
-- DEFVAL { 2 }
-- ::= { igmpSnoopMgt 3 }
--
--
-- igmpSnoopQueryInterval OBJECT-TYPE
-- SYNTAX INTEGER (60..125)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Query interval."
-- DEFVAL { 125 }
-- ::= { igmpSnoopMgt 4 }
--
-- igmpSnoopQueryMaxResponseTime OBJECT-TYPE
-- SYNTAX INTEGER (5..25)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Timeout value (seconds) between IGMP reports received on a port
-- for an IP Multicast Address that can pass before the system
-- sends an IGMP Query out the port and removes it from the
-- list."
-- DEFVAL { 10 }
-- ::= { igmpSnoopMgt 5 }
--
-- igmpSnoopQueryTimeout OBJECT-TYPE
-- SYNTAX INTEGER (300..500)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Query time-out."
-- DEFVAL { 300 }
-- ::= { igmpSnoopMgt 6 }
--
-- igmpSnoopVersion OBJECT-TYPE
-- SYNTAX INTEGER (1..2)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Version."
-- DEFVAL { 2 }
-- ::= { igmpSnoopMgt 7 }
--
-- igmpSnoopRouterCurrentTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopRouterCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for current router ports."
-- ::= { igmpSnoopMgt 8 }
--
-- igmpSnoopRouterCurrentEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopRouterCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for current router ports."
-- INDEX { igmpSnoopRouterCurrentVlanIndex }
-- ::= {
-- igmpSnoopRouterCurrentTable 1 }
--
-- IgmpSnoopRouterCurrentEntry ::=
-- SEQUENCE {
-- igmpSnoopRouterCurrentVlanIndex
-- Unsigned32,
-- igmpSnoopRouterCurrentPorts
-- PortList,
-- igmpSnoopRouterCurrentStatus
-- PortList
-- }
--
-- igmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
-- ::= { igmpSnoopRouterCurrentEntry 1 }
--
-- igmpSnoopRouterCurrentPorts OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are current router ports.
-- Within this list, some router ports are static router ports.
-- Please refer to igmpSnoopRouterStaticTable."
-- ::= { igmpSnoopRouterCurrentEntry 2 }
--
-- igmpSnoopRouterCurrentStatus OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are static router ports."
-- ::= { igmpSnoopRouterCurrentEntry 3 }
--
-- igmpSnoopRouterStaticTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopRouterStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for static router ports."
-- ::= { igmpSnoopMgt 9 }
--
-- igmpSnoopRouterStaticEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopRouterStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for static router ports."
-- INDEX { igmpSnoopRouterStaticVlanIndex }
-- ::= {
-- igmpSnoopRouterStaticTable 1 }
--
-- IgmpSnoopRouterStaticEntry ::=
-- SEQUENCE {
-- igmpSnoopRouterStaticVlanIndex
-- Unsigned32,
-- igmpSnoopRouterStaticPorts
-- PortList,
-- igmpSnoopRouterStaticStatus
-- ValidStatus
-- }
--
-- igmpSnoopRouterStaticVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
-- ::= { igmpSnoopRouterStaticEntry 1 }
--
-- igmpSnoopRouterStaticPorts OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are static router ports."
-- ::= { igmpSnoopRouterStaticEntry 2 }
--
-- igmpSnoopRouterStaticStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { igmpSnoopRouterStaticEntry 3 }
--
-- igmpSnoopMulticastCurrentTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopMulticastCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for current multicast addresses."
-- ::= { igmpSnoopMgt 10 }
--
-- igmpSnoopMulticastCurrentEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopMulticastCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for current multicast addresses."
-- INDEX { igmpSnoopMulticastCurrentVlanIndex,
-- igmpSnoopMulticastCurrentIpAddress }
-- ::= {
-- igmpSnoopMulticastCurrentTable 1 }
--
-- IgmpSnoopMulticastCurrentEntry ::=
-- SEQUENCE {
-- igmpSnoopMulticastCurrentVlanIndex
-- Unsigned32,
-- igmpSnoopMulticastCurrentIpAddress
-- IpAddress,
-- igmpSnoopMulticastCurrentPorts
-- PortList,
-- igmpSnoopMulticastCurrentStatus
-- PortList
-- }
--
-- igmpSnoopMulticastCurrentVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
-- ::= { igmpSnoopMulticastCurrentEntry 1 }
--
-- igmpSnoopMulticastCurrentIpAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "IP address of multicast group."
-- ::= { igmpSnoopMulticastCurrentEntry 2 }
--
-- igmpSnoopMulticastCurrentPorts OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are members."
-- ::= { igmpSnoopMulticastCurrentEntry 3 }
--
-- igmpSnoopMulticastCurrentStatus OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are static members."
-- ::= { igmpSnoopMulticastCurrentEntry 4 }
--
-- igmpSnoopMulticastStaticTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopMulticastStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for static multicast addresses."
-- ::= { igmpSnoopMgt 11 }
--
--igmpSnoopMulticastStaticEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopMulticastStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for static multicast addresses."
-- INDEX { igmpSnoopMulticastStaticVlanIndex,
-- igmpSnoopMulticastStaticIpAddress }
-- ::= {
--igmpSnoopMulticastStaticTable 1 }
--
--IgmpSnoopMulticastStaticEntry ::=
-- SEQUENCE {
-- igmpSnoopMulticastStaticVlanIndex
-- Unsigned32,
-- igmpSnoopMulticastStaticIpAddress
-- IpAddress,
-- igmpSnoopMulticastStaticPorts
-- PortList,
-- igmpSnoopMulticastStaticStatus
-- ValidStatus
-- }
--
--igmpSnoopMulticastStaticVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The interface identified by a particular value of
-- this index is the same interface as identified by
-- the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
-- The entry will only appear here after a configure to
-- igmpSnoopMulticastStaticTable."
-- ::= { igmpSnoopMulticastStaticEntry 1 }
--
--igmpSnoopMulticastStaticIpAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "IP address of multicast group."
-- ::= { igmpSnoopMulticastStaticEntry 2 }
--
--igmpSnoopMulticastStaticPorts OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are members."
-- ::= { igmpSnoopMulticastStaticEntry 3 }
--
--igmpSnoopMulticastStaticStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { igmpSnoopMulticastStaticEntry 4 }
--
--igmpSnoopCurrentVlanTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopCurrentVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for enabling or disabling IGMP snooping per VLAN."
-- ::= { igmpSnoopMgt 14 }
--
--igmpSnoopCurrentVlanEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopCurrentVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for enabling or disabling IGMP snooping."
-- INDEX { igmpSnoopCurrentVlanIndex }
-- ::= { igmpSnoopCurrentVlanTable 1 }
--
--IgmpSnoopCurrentVlanEntry ::= SEQUENCE
--{
-- igmpSnoopCurrentVlanIndex Unsigned32,
-- igmpSnoopCurrentVlanImmediateLeave EnabledStatus
--}
--
--igmpSnoopCurrentVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
-- This table has only one entry - the entry for
-- the VLAN of the management interface."
-- ::= { igmpSnoopCurrentVlanEntry 1 }
--
--igmpSnoopCurrentVlanImmediateLeave OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The parameter to enable or disable the Immediate-Leave feature on this VLAN."
-- ::= { igmpSnoopCurrentVlanEntry 3 }
--
--igmpSnoopLeaveProxy OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This enables or disables Leave Proxy for IGMP Snooping."
-- ::= { igmpSnoopMgt 15 }
--
--igmpSnoopFilterStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Parameter to enable or disable IGMP filtering on the device."
-- ::= { igmpSnoopMgt 17 }
--
--igmpSnoopProfileTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopProfileEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for configuring the IGMP snooping profile."
-- ::= { igmpSnoopMgt 18 }
--
--igmpSnoopProfileEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopProfileEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry for configuring the IGMP snooping profile."
-- INDEX { igmpSnoopProfileId }
-- ::= { igmpSnoopProfileTable 1 }
--
--IgmpSnoopProfileEntry ::= SEQUENCE
--{
-- igmpSnoopProfileId Unsigned32,
-- igmpSnoopProfileAction INTEGER,
-- igmpSnoopProfileStatus ValidStatus
--}
--
--igmpSnoopProfileId OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The ID of the IGMP snooping profile."
-- ::= { igmpSnoopProfileEntry 1 }
--
--igmpSnoopProfileAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- permit(1),
-- deny(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The access mode of the IGMP snooping profile."
-- DEFVAL { deny }
-- ::= { igmpSnoopProfileEntry 2 }
--
--igmpSnoopProfileStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { igmpSnoopProfileEntry 3 }
--
--igmpSnoopProfileCtl OBJECT IDENTIFIER ::= { igmpSnoopMgt 19 }
--
--igmpSnoopProfileCtlId OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The ID of the IGMP snooping profile."
-- ::= { igmpSnoopProfileCtl 1 }
--
--igmpSnoopProfileCtlInetAddressType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The address type is associated with this agent.
-- Only ipv4(1) type is supported."
-- ::= { igmpSnoopProfileCtl 2 }
--
--igmpSnoopProfileCtlStartInetAddress OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The specified addresses in the start of the controlled IP multicast addresses."
-- ::= { igmpSnoopProfileCtl 3 }
--
--igmpSnoopProfileCtlEndInetAddress OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The specified addresses in the end of the controlled IP multicast addresses."
-- ::= { igmpSnoopProfileCtl 4 }
--
--igmpSnoopProfileCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noAction(1),
-- create(2),
-- destroy(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Setting it to create(2) creates the range of the controlled IP multicast addresses.
-- Setting it to destroy(3) destroys the range of the controlled IP multicast addresses.
-- When the action is completed, this object becomes noAction(1)."
-- ::= { igmpSnoopProfileCtl 5 }
--
--igmpSnoopProfileRangeTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopProfileRangeEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for configuring the range of the IGMP snooping profile."
-- ::= { igmpSnoopMgt 20 }
--
--igmpSnoopProfileRangeEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopProfileRangeEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry for configuring the range of the IGMP snooping profile."
-- INDEX { igmpSnoopProfileRangeProfileId ,igmpSnoopProfileRangeInetAddressType,igmpSnoopProfileRangeStartInetAddress }
-- ::= { igmpSnoopProfileRangeTable 1 }
--
--IgmpSnoopProfileRangeEntry ::= SEQUENCE
--{
-- igmpSnoopProfileRangeProfileId Unsigned32,
-- igmpSnoopProfileRangeInetAddressType InetAddressType,
-- igmpSnoopProfileRangeStartInetAddress InetAddress,
-- igmpSnoopProfileRangeEndInetAddress InetAddress,
-- igmpSnoopProfileRangeAction INTEGER
--}
--
--igmpSnoopProfileRangeProfileId OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This is defined as igmpSnoopProfileId."
-- ::= { igmpSnoopProfileRangeEntry 1 }
--
--igmpSnoopProfileRangeInetAddressType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The address type is associated with this agent.
-- Only ipv4(1) type is supported."
-- ::= { igmpSnoopProfileRangeEntry 2 }
--
--igmpSnoopProfileRangeStartInetAddress OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The specified addresses in the start of the controlled IP multicast addresses."
-- ::= { igmpSnoopProfileRangeEntry 3 }
--
--igmpSnoopProfileRangeEndInetAddress OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The specified addresses in the end of the controlled IP multicast addresses."
-- ::= { igmpSnoopProfileRangeEntry 4 }
--
--igmpSnoopProfileRangeAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- permit(1),
-- deny(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The access mode of the IGMP snooping profile."
-- DEFVAL { deny }
-- ::= { igmpSnoopProfileRangeEntry 5 }
--
--igmpSnoopFilterPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopFilterPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for port configuration in IGMP filtering."
-- ::= { igmpSnoopMgt 21 }
--
--igmpSnoopFilterPortEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopFilterPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for port configuration in IGMP filtering."
-- INDEX { igmpSnoopFilterPortIndex }
-- ::= { igmpSnoopFilterPortTable 1 }
--
--IgmpSnoopFilterPortEntry ::= SEQUENCE
--{
-- igmpSnoopFilterPortIndex Unsigned32,
-- igmpSnoopFilterPortProfileId Integer32
--}
--
--igmpSnoopFilterPortIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The port and trunk (including trunk members) interface of
-- the portTable. The interface identified by a particular value
-- of this index is the same interface identified by the same
-- value of ifIndex in the IF-MIB."
-- ::= { igmpSnoopFilterPortEntry 1 }
--
--igmpSnoopFilterPortProfileId OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The igmpSnoopProfileEntry identified by a particular value of this index
-- is the same interface identified by the same value of the igmpSnoopProfileId
-- object. If there is no corresponding entry in the igmpSnoopProfileTable,
-- then no association exists. In particular, if this value is zero, no
-- associated profile will be generated, as zero is not a valid profile index."
-- ::= { igmpSnoopFilterPortEntry 2 }
--
--igmpSnoopThrottlePortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgmpSnoopThrottlePortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for port configuration in IGMP throttling."
-- ::= { igmpSnoopMgt 22 }
--
--igmpSnoopThrottlePortEntry OBJECT-TYPE
-- SYNTAX IgmpSnoopThrottlePortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for port configuration in IGMP throttling."
-- INDEX { igmpSnoopThrottlePortIndex }
-- ::= { igmpSnoopThrottlePortTable 1 }
--
--IgmpSnoopThrottlePortEntry ::= SEQUENCE
--{
-- igmpSnoopThrottlePortIndex Unsigned32,
-- igmpSnoopThrottlePortRunningStatus INTEGER,
-- igmpSnoopThrottlePortAction INTEGER,
-- igmpSnoopThrottlePortMaxGroups Integer32,
-- igmpSnoopThrottlePortCurrentGroups Integer32
--}
--
--igmpSnoopThrottlePortIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The port and trunk (including trunk members) interface of
-- the portTable. The interface identified by a particular value
-- of this index is the same interface identified by the same
-- value of ifIndex in the IF-MIB."
-- ::= { igmpSnoopThrottlePortEntry 1 }
--
--igmpSnoopThrottlePortRunningStatus OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Describes the running status of the IGMP throttling to the switch.
-- A value of true(1) indicates the IGMP throttling mechanism is active.
-- A value of false(2) indicates the IGMP throttling mechanism is inactive."
-- ::= { igmpSnoopThrottlePortEntry 2 }
--
--igmpSnoopThrottlePortAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- replace(1),
-- deny(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The action mode of the IGMP throttling. A value of replace(1)
-- means to replace a joined multicast group randomly when an interface
-- receives an IGMP report and the number of current joined multicast groups
-- is equal to the maximum number of IGMP groups that the interface can join.
-- A value of deny(2) means to deny the IGMP report request when an interface
-- receives an IGMP report and the number of current joined multicast groups
-- is equal to the maximum number of IGMP groups that the interface can join."
-- DEFVAL { deny }
-- ::= { igmpSnoopThrottlePortEntry 3 }
--
--igmpSnoopThrottlePortMaxGroups OBJECT-TYPE
-- SYNTAX Integer32(0..64)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The maximum number of IGMP groups that the interface can join."
-- ::= { igmpSnoopThrottlePortEntry 4 }
--
--igmpSnoopThrottlePortCurrentGroups OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The current number of IGMP groups that the interface has joined."
-- ::= { igmpSnoopThrottlePortEntry 5}
--
----
---- The Probe Configuration Group
----
---- This group controls the configuration of various operating
---- parameters of the probe.
--
--netConfigTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF NetConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table of netConfigEntries."
-- ::= { ipMgt 1 }
--
--netConfigEntry OBJECT-TYPE
-- SYNTAX NetConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A set of configuration parameters for a particular
-- network interface on this device. If the device has no network
-- interface, this table is empty.
--
-- The index is composed of the ifIndex assigned to the
-- corresponding interface."
-- INDEX { netConfigIfIndex, netConfigIPAddress, netConfigSubnetMask }
-- ::= { netConfigTable 1 }
--
--NetConfigEntry ::= SEQUENCE {
-- netConfigIfIndex Integer32,
-- netConfigIPAddress IpAddress,
-- netConfigSubnetMask IpAddress,
-- netConfigPrimaryInterface INTEGER,
-- netConfigUnnumbered INTEGER,
-- netConfigStatus RowStatus
--}
--
--
--
--
--netConfigIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "VLAN interface on which this entry is defined.
-- This is defined as ifIndex in the IF-MIB."
-- ::= { netConfigEntry 1 }
--
--netConfigIPAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The IP address of this Net interface. The default value
-- for this object is 0.0.0.0. If either the netConfigIPAddress
-- or netConfigSubnetMask are 0.0.0.0, then when the device
-- boots, it may use BOOTP to try to figure out what these
-- values should be. If BOOTP fails, before the device
-- can talk on the network, this value must be configured
-- (e.g., through a terminal attached to the device). If BOOTP is
-- used, care should be taken to not send BOOTP broadcasts too
-- frequently and to eventually send very infrequently if no
-- replies are received."
-- ::= { netConfigEntry 2 }
--
--netConfigSubnetMask OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The subnet mask of this Net interface. The default value
-- for this object is 0.0.0.0. If either the netConfigIPAddress
-- or netConfigSubnetMask are 0.0.0.0, then when the device
-- boots, it may use BOOTP to try to figure out what these
-- values should be. If BOOTP fails, before the device
-- can talk on the network, this value must be configured
-- (e.g., through a terminal attached to the device). If BOOTP is
-- used, care should be taken to not send BOOTP broadcasts too
-- frequently and to eventually send very infrequently if no
-- replies are received."
-- ::= { netConfigEntry 3 }
--
--netConfigPrimaryInterface OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- primary(1),
-- secondary(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Whether this is a primary interface."
-- ::= { netConfigEntry 4 }
--
--netConfigUnnumbered OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- unnumbered(1),
-- notUnnumbered(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Whether this is an unnumbered interface."
-- ::= { netConfigEntry 5 }
--
--netConfigStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this netConfigEntry.
--
-- An entry may not exist in the active state unless all
-- objects in the entry have an appropriate value."
-- ::= { netConfigEntry 6 }
--
--netDefaultGateway OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The IP Address of the default gateway. If this value is
-- undefined or unknown, it shall have the value 0.0.0.0."
-- ::= { ipMgt 2 }
--
--ipHttpState OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Whether HTTP is enabled."
-- ::= { ipMgt 3 }
--
--ipHttpPort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The port number for HTTP."
-- ::= { ipMgt 4 }
--
--ipDhcpRestart OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- restart(1),
-- noRestart(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Write it to restart(1) to restart DHCP.
-- When read, this value always returns noRestart(2)."
-- ::= { ipMgt 5 }
--
--ipHttpsState OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Whether HTTPS is enabled."
-- ::= { ipMgt 6 }
--
--ipHttpsPort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The port number for HTTPS."
-- ::= { ipMgt 7 }
--
----dhcpMgt OBJECT IDENTIFIER ::= { ipMgt 11 }
----dhcpOption82 OBJECT IDENTIFIER ::= { dhcpMgt 4 }
----
----dhcpOption82Status OBJECT-TYPE
----SYNTAX INTEGER {
---- enabled(1),
---- disabled(2)
---- }
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "Set enabled(1) to enable DHCP Relay Option 82,
---- set disabled(2) to disable it."
---- ::= { dhcpOption82 1 }
----
----dhcpOption82Policy OBJECT-TYPE
----SYNTAX INTEGER {
---- drop(1),
---- replace(2),
---- keep(3)
---- }
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "Provide three policies to handle packet"
---- ::= { dhcpOption82 2 }
--
--pingMgt OBJECT IDENTIFIER ::= { ipMgt 15 }
--
--pingIpAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The address of the device to be pinged."
-- ::= { pingMgt 1 }
--
--pingPacketSize OBJECT-TYPE
-- SYNTAX Integer32 (32..512)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the size of ping packets to send to the target in this ping
-- operation. The lower and upper boundaries of this object are
-- protocol-dependent."
-- DEFVAL { 32 }
-- ::= { pingMgt 2 }
--
--pingRoundTripTime OBJECT-TYPE
-- SYNTAX Integer32
-- UNITS "milliseconds"
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The last round trip time of a single ping operation. When the ping
-- opertion is time out, a value of -1 will be returned."
-- ::= { pingMgt 3 }
--
--pingCompleted OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "A value of true(1) will be read when this ping operation
-- have been either responded to or timed out. A value of false(2) will be
-- read when there is a ping operation is currently running and all
-- associate objects in pingMgt cannot be modified during this period."
-- ::= { pingMgt 4 }
--
--pingAction OBJECT-TYPE
-- SYNTAX INTEGER {
-- noAction(1),
-- pingStart(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The action of the pingMgt. Set this objects to pingStart(2) to begin
-- the ping operation. Once the action is set to pingStart(2), the
-- associate pingMgt objects cannot be modified until this ping operation is
-- completed (pingCompleted is true). When the ping has ended or no ping
-- operation is performing, this object will get a value of noAction(1)."
-- ::= { pingMgt 5 }
--
----
---- bcastStormMgt
----
--
--bcastStormTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF BcastStormEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table of descriptive and status information about
-- configuration of each switch ports(including expansion slot)
-- in this system."
-- ::= { bcastStormMgt 1 }
--
--bcastStormEntry OBJECT-TYPE
-- SYNTAX BcastStormEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An entry in the table, containing information
-- about configuration in one switch port of the switch."
-- INDEX { bcastStormIfIndex }
-- ::= { bcastStormTable 1 }
--
--BcastStormEntry ::= SEQUENCE
--{
-- bcastStormIfIndex Integer32,
-- bcastStormStatus INTEGER,
-- bcastStormOctetRateScale INTEGER,
-- bcastStormOctetRateLevel INTEGER
--}
--
--bcastStormIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This is defined as ifIndex in the IF-MIB."
-- ::= { bcastStormEntry 1 }
--
--bcastStormStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether broadcast storm protection is enabled."
-- ::= { bcastStormEntry 2 }
--
------------------------------
--bcastStormOctetRateScale OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- scale-1m(0),
-- scale-100k(1),
-- scale-10k(2),
-- scale-1k(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Broadcast storm scale as octets per second.
-- If this is scale-1m(0), then Broadcast storm scale as 1M bytes per second,
-- If this is scale-100k(1), then Broadcast storm scale as 100K bytes per second,
-- If this is scale-10k(2), then Broadcast storm scale as 10K bytes per second,
-- If this is scale-1k(3), then Broadcast storm scale as 1K bytes per second,"
-- ::= { bcastStormEntry 3 }
--
--bcastStormOctetRateLevel OBJECT-TYPE
-- SYNTAX INTEGER (1..127)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Broadcast storm level."
-- ::= { bcastStormEntry 5 }
----------------------------------
-------------------------------------------------------------------------------
--bcastStormSampleType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- octet-rate(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Sample type. If this is pkt-rate(1), then
-- bcastStormPktRate is valid. If this is octet-rate(2),
-- then bcastStormOctetRate is valid. If this is percent(3),
-- then bcastStormPercent is valid."
-- ::= { bcastStormEntry 3 }
--
--bcastStormOctetRate OBJECT-TYPE
-- SYNTAX INTEGER (64..95232000)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Broadcast storm threshold as octets per second."
-- ::= { bcastStormEntry 5 }
--------------------------------------------------------------------------------
--
-- vlanMgt
--
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for VLAN configuration."
::= { vlanMgt 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for VLAN configuration."
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE
{
vlanIndex Unsigned32,
vlanAddressMethod INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { vlanEntry 1 }
vlanAddressMethod OBJECT-TYPE
SYNTAX INTEGER
{
user(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to get the IP address."
::= { vlanEntry 2 }
vlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in VLAN."
::= { vlanMgt 2 }
vlanPortEntry OBJECT-TYPE
SYNTAX VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in VLAN."
INDEX { vlanPortIndex }
::= { vlanPortTable 1 }
VlanPortEntry ::= SEQUENCE
{
vlanPortIndex Integer32,
vlanPortMode INTEGER,
vlanPortPrivateVlanType INTEGER
}
vlanPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as ifIndex in the IF-MIB."
::= { vlanPortEntry 1 }
vlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
hybrid(1),
dot1qTrunk(2),
access(3),
vlanUnaware(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link, but
it is not supported in ES4528V product."
::= { vlanPortEntry 2 }
vlanPortPrivateVlanType OBJECT-TYPE
SYNTAX INTEGER
{
non-isolated(1),
isolated(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port type defined for Private vlan. In a private VLAN,
communication between isolated ports in that private VLAN is not permitted."
::= { vlanPortEntry 3 }
--
-- priorityMgt
--
--prioIpPrecDscpStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- disabled(1),
-- precedence(2),
-- dscp(3),
-- tos(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether IP precedence or DSCP look-up is enabled."
-- ::= { priorityMgt 1 }
--
--prioIpPrecTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PrioIpPrecEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for IP precedence priority mapping."
-- ::= { priorityMgt 2 }
--
--prioIpPrecEntry OBJECT-TYPE
-- SYNTAX PrioIpPrecEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for IP precendence priority mapping."
-- INDEX { prioIpPrecPort, prioIpPrecValue }
-- ::= { prioIpPrecTable 1 }
--
--PrioIpPrecEntry ::= SEQUENCE
--{
-- prioIpPrecPort Integer32,
-- prioIpPrecValue Integer32,
-- prioIpPrecCos INTEGER
--}
--
--prioIpPrecPort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This is defined as ifIndex in the IF-MIB."
-- ::= { prioIpPrecEntry 2 }
--
--prioIpPrecValue OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Precedence value for this entry."
-- ::= { prioIpPrecEntry 3 }
--
--prioIpPrecCos OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Class of service for this entry."
-- ::= { prioIpPrecEntry 4 }
--
--prioIpPrecRestoreDefault OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object is to restore IP Precedence
-- settings of a port to default.
-- To do this, write it to the value of ifIndex
-- defined by the ifIndex in the IF-MIB.
-- The range is 1-28 when port number is 26.
-- When read, this object always returns 0."
-- ::= { priorityMgt 3 }
--
--prioIpDscpTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PrioIpDscpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for IP DSCP priority mapping."
-- ::= { priorityMgt 4 }
--
--prioIpDscpEntry OBJECT-TYPE
-- SYNTAX PrioIpDscpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for IP DSCP priority mapping."
-- INDEX { prioIpDscpPort, prioIpDscpValue }
-- ::= { prioIpDscpTable 1 }
--
--PrioIpDscpEntry ::= SEQUENCE
--{
-- prioIpDscpPort Integer32,
-- prioIpDscpValue Integer32,
-- prioIpDscpCos INTEGER
--}
--
--prioIpDscpPort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This is defined as ifIndex in the IF-MIB."
-- ::= { prioIpDscpEntry 1 }
--
--prioIpDscpValue OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "DSCP value for this entry."
-- ::= { prioIpDscpEntry 2 }
--
--prioIpDscpCos OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Class of service for this entry."
-- ::= { prioIpDscpEntry 3 }
--
--prioIpDscpRestoreDefault OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object is to restore IP DSCP
-- settings of a port to default.
-- To do this, write it to the value of ifIndex
-- defined by the ifIndex in the IF-MIB.
-- The range is 1-28 when port number is 26.
-- When read, this object always returns 0."
-- ::= { priorityMgt 5 }
--
--prioIpPortEnableStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether IP Port priority look-up is enabled."
-- ::= { priorityMgt 6 }
--
--prioIpPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PrioIpPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for IP port priority mapping."
-- ::= { priorityMgt 7 }
--
--prioIpPortEntry OBJECT-TYPE
-- SYNTAX PrioIpPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for IP port priority mapping."
-- INDEX { prioIpPortPhysPort,prioIpPortValue }
-- ::= { prioIpPortTable 1 }
--
--PrioIpPortEntry ::= SEQUENCE
--{
-- prioIpPortPhysPort Integer32,
-- prioIpPortValue Integer32,
-- prioIpPortCos INTEGER,
-- prioIpPortStatus INTEGER
--}
--
--prioIpPortPhysPort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This is defined as ifIndex in the IF-MIB."
-- ::= { prioIpPortEntry 1 }
--
--prioIpPortValue OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "IP port for this value."
-- ::= { prioIpPortEntry 2 }
--
--prioIpPortCos OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Class of service for this entry."
-- ::= { prioIpPortEntry 3 }
--
--prioIpPortStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- valid(1),
-- invalid(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Writing this to valid(1) creates an entry.
-- Writing this to invalid(2) destroys an entry."
-- ::= { prioIpPortEntry 4 }
--
--prioCopy OBJECT IDENTIFIER ::= { priorityMgt 8 }
--
--prioCopyIpPrec OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Action to copy IP Precedence settings from
-- a source port to many destination ports.
-- The first four octets represent an integer for
-- the source port, in high-to-low (big-endian) order.
-- Starting from the 5th octet is destination port list
-- in a form described by PortList in the Q-BRIDGE-MIB.
-- Writing this object will perform copy.
-- Reading this object will always get a zero-length
-- octet string."
-- ::= { prioCopy 1 }
--
--prioCopyIpDscp OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Action to copy IP DSCP settings from
-- a source port to many destination ports.
-- The first four octets represent an integer for
-- the source port, in high-to-low (big-endian) order.
-- Starting from the 5th octet is destination port list
-- in a form described by PortList in the Q-BRIDGE-MIB.
-- Writing this object will perform copy.
-- Reading this object will always get a zero-length
-- octet string."
-- ::= { prioCopy 2 }
--
--prioCopyIpPort OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Action to copy IP Port settings from
-- a source port to many destination ports.
-- The first four octets represent an integer for
-- the source port, in high-to-low (big-endian) order.
-- Starting from the 5th octet is destination port list
-- in a form described by PortList in the Q-BRIDGE-MIB.
-- Writing this object will perform copy.
-- Reading this object will always get a zero-length
-- octet string."
-- ::= { prioCopy 3 }
--
--prioWrrTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PrioWrrEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for weighted round robin (WRR)."
-- ::= { priorityMgt 9 }
--
--prioWrrEntry OBJECT-TYPE
-- SYNTAX PrioWrrEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for weighted round robin (WRR)."
-- INDEX { prioWrrTrafficClass }
-- ::= { prioWrrTable 1 }
--
--PrioWrrEntry ::= SEQUENCE
--{
-- prioWrrTrafficClass INTEGER,
-- prioWrrWeight INTEGER
--}
--
--prioWrrTrafficClass OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Traffic class for this entry, as defined in
-- dot1dTrafficClass in the Q-BRIDGE-MIB. The actual
-- maximum depends on the hardware, and is
-- equal to dot1dPortNumTrafficClasses-1."
-- ::= { prioWrrEntry 1 }
--
--prioWrrWeight OBJECT-TYPE
-- SYNTAX INTEGER (1..31)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Weight for this entry."
-- ::= { prioWrrEntry 2 }
--
--prioQueueMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- wrr(1),
-- strict(2),
-- hybrid(4)
--
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The global status for the prioQueue.
-- wrr(1),strict(2),hybrid(4)"
-- ::= { priorityMgt 10 }
--
--
--
--prioIpTosTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PrioIpTosEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for IP tos priority mapping."
-- ::= { priorityMgt 11 }
--
--prioIpTosEntry OBJECT-TYPE
-- SYNTAX PrioIpTosEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for IP tos priority mapping."
-- INDEX { prioIpTosPort, prioIpTosValue }
-- ::= { prioIpTosTable 1 }
--
--PrioIpTosEntry ::= SEQUENCE
--{
-- prioIpTosPort Integer32,
-- prioIpTosValue Integer32,
-- prioIpTosCos INTEGER
--}
--
--prioIpTosPort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This is defined as ifIndex in the IF-MIB."
-- ::= { prioIpTosEntry 2 }
--
--prioIpTosValue OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Tos value for this entry."
-- ::= { prioIpTosEntry 3 }
--
--prioIpTosCos OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Class of service for this entry."
-- ::= { prioIpTosEntry 4 }
--
--prioIpTosRestoreDefault OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object is to restore IP Tos
-- settings of a port to default.
-- To do this, write it to the value of ifIndex
-- defined by the ifIndex in the IF-MIB.
-- The range is 1-28 when port number is 26.
-- When read, this object always returns 0."
-- ::= { priorityMgt 12 }
--
--
----
---- trapDestMgt
----
--
----trapDestTable OBJECT-TYPE
---- SYNTAX SEQUENCE OF TrapDestEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "A list of trap destination entries."
---- ::= { trapDestMgt 1 }
----
----trapDestEntry OBJECT-TYPE
---- SYNTAX TrapDestEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "This entry includes a destination IP address to which to send
---- traps for this community."
---- INDEX { trapDestAddress }
---- ::= { trapDestTable 1 }
----
----TrapDestEntry ::= SEQUENCE {
---- trapDestAddress IpAddress,
---- trapDestCommunity OCTET STRING,
---- trapDestStatus INTEGER,
---- trapDestVersion INTEGER
----}
----
----trapDestAddress OBJECT-TYPE
---- SYNTAX IpAddress
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "The address to send traps."
---- ::= { trapDestEntry 1 }
----
----trapDestCommunity OBJECT-TYPE
---- SYNTAX OCTET STRING (SIZE(0..32))
---- MAX-ACCESS read-create
---- STATUS current
---- DESCRIPTION
---- "A community to which this destination address belongs."
---- ::= { trapDestEntry 2 }
----
----trapDestStatus OBJECT-TYPE
---- SYNTAX INTEGER
---- {
---- valid(1),
---- invalid(2)
---- }
---- MAX-ACCESS read-create
---- STATUS current
---- DESCRIPTION
---- "Writing this to valid(1) creates an entry.
---- Writing this to invalid(2) destroys an entry."
---- ::= { trapDestEntry 3 }
----
----trapDestVersion OBJECT-TYPE
---- SYNTAX INTEGER
---- {
---- version1(1),
---- version2(2)
---- }
---- MAX-ACCESS read-create
---- STATUS current
---- DESCRIPTION
---- "This variables represent the version of the Trap we wish to send to trap Receiver,
---- if the value is 1, mean we wish to send Version 1 trap, if the value is 2,
---- mean we wish to send version 2 trap."
---- ::= { trapDestEntry 4}
--
---- trapVar is for binding variables for traps, there is no value when
---- no trap is sent.
----trapVar OBJECT IDENTIFIER ::= { trapDestMgt 2 }
----
----trapIpFilterRejectMode OBJECT-TYPE
---- SYNTAX INTEGER
---- {
---- web(1),
---- snmp(2),
---- telnet(3)
---- }
---- MAX-ACCESS accessible-for-notify
---- STATUS current
---- DESCRIPTION "This variable is for trap var binding,
---- indicated the ipfilter reject mode.
---- web(1),
---- snmp(2),
---- telnet(3)."
---- ::= { trapVar 6 }
----
----trapIpFilterRejectIp OBJECT-TYPE
---- SYNTAX Integer32
---- MAX-ACCESS accessible-for-notify
---- STATUS current
---- DESCRIPTION "This variable is for trap var binding,
---- indicating the IP address that rejected by the ipfilter."
---- ::= { trapVar 7 }
--
----
---- rateLimitMgt
----
--
--rateLimitMgt OBJECT IDENTIFIER ::= { qosMgt 1 }
--
--rateLimitPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF RateLimitPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for rate limit of each port."
-- ::= { rateLimitMgt 2 }
--
--rateLimitPortEntry OBJECT-TYPE
-- SYNTAX RateLimitPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for rate limit of each port."
-- INDEX { rlPortIndex }
-- ::= { rateLimitPortTable 1 }
--
--
--RateLimitPortEntry ::= SEQUENCE
--{
-- rlPortIndex Integer32,
-- rlPortInputStatus EnabledStatus,
-- rlPortOutputStatus EnabledStatus,
-- rlPortInputLevel Integer32,
-- rlPortInputScale INTEGER,
-- rlPortOutputLevel Integer32,
-- rlPortOutputScale INTEGER
--}
--
--rlPortIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The port and the trunk (including trunk member) interface of
-- the portTable. The interface identified by a particular value
-- of this index is the same interface as identified by the same
-- value of ifIndex in the IF-MIB."
-- ::= { rateLimitPortEntry 1 }
--
--rlPortInputStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether input rate limit is enabled for this port."
-- ::= { rateLimitPortEntry 6 }
--
--rlPortOutputStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether output rate limit is enabled for this port."
-- ::= { rateLimitPortEntry 7 }
--
--rlPortInputLevel OBJECT-TYPE
-- SYNTAX Integer32(1..127)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The Level of the input rate limit.all ports range is 1..127"
-- ::= { rateLimitPortEntry 8 }
--
--rlPortInputScale OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- scale-10m(0),
-- scale-1m(1),
-- scale-100k(2),
-- scale-10k(3),
-- scale-1k(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Rate Limit scale as octets per second.
-- If this is scale-10m(0), then Rate Limit scale as 10M bytes per second,
-- If this is scale-1m(1), then Rate Limit scale as 1M bytes per second,
-- If this is scale-100k(2), then Rate Limit scale as 100K bytes per second,
-- If this is scale-10k(3), then Rate Limit scale as 10K bytes per second,
-- If this is scale-1k(4), then Rate Limit scale as 1K bytes per second,"
-- ::= { rateLimitPortEntry 9 }
--
--rlPortOutputLevel OBJECT-TYPE
-- SYNTAX Integer32(1..127)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The Level of the output rate limit.all ports range is 1..127"
-- ::= { rateLimitPortEntry 10 }
--
--rlPortOutputScale OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- scale-10m(0),
-- scale-1m(1),
-- scale-100k(2),
-- scale-10k(3),
-- scale-1k(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Rate Limit scale as octets per second.
-- If this is scale-10m(0), then Rate Limit scale as 10M bytes per second,
-- If this is scale-1m(1), then Rate Limit scale as 1M bytes per second,
-- If this is scale-100k(2), then Rate Limit scale as 100K bytes per second,
-- If this is scale-10k(3), then Rate Limit scale as 10K bytes per second,
-- If this is scale-1k(4), then Rate Limit scale as 1K bytes per second,"
-- ::= { rateLimitPortEntry 11 }
--
--cosMgt OBJECT IDENTIFIER ::= { qosMgt 3 }
--
----prioAclToCosMappingTable
--prioAclToCosMappingTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PrioAclToCosMappingEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for ACL to CoS Mapping."
-- ::= { cosMgt 1 }
--
--prioAclToCosMappingEntry OBJECT-TYPE
-- SYNTAX PrioAclToCosMappingEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for ACL to CoS Mapping."
-- INDEX { prioAclToCosMappingIfIndex, prioAclToCosMappingAclName }
-- ::= { prioAclToCosMappingTable 1 }
--
--PrioAclToCosMappingEntry ::= SEQUENCE
--{
-- prioAclToCosMappingIfIndex Integer32,
-- prioAclToCosMappingAclName DisplayString,
-- prioAclToCosMappingCosValue Integer32,
-- prioAclToCosMappingStatus RowStatus
--}
--
--prioAclToCosMappingIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The port interface of the prioAclToCosMappingEntry. The interface
-- identified by a particular value of this index is the
-- same interface as identified by the same value of
-- ifIndex in the IF-MIB."
-- ::= { prioAclToCosMappingEntry 1 }
--
--prioAclToCosMappingAclName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(1..15))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The name of an IP ACL. Within a feature a unique name is
-- used to identify the list to which the entry belongs
-- in the device."
-- ::= { prioAclToCosMappingEntry 2 }
--
--prioAclToCosMappingCosValue OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "CoS value of the prioAclToCosMappingTable."
-- ::= { prioAclToCosMappingEntry 3 }
--
--prioAclToCosMappingStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row entry. This object isused to manage the
-- creation and deletion of conceptual rows.
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has value 'active');
-- it is not available for use by the managed device, though
-- the agent has sufficient information to make it so (the
-- status column has value 'notInService'); or, it is not
-- available for use by the managed device, and an attempt to
-- make it so would fail because the agent has insufficient
-- information (the state column has value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { prioAclToCosMappingEntry 4 }
--
----
---- privateVlanMgt
----
--
--portSecurityMgt OBJECT IDENTIFIER ::= { securityMgt 2 }
--radiusMgt OBJECT IDENTIFIER ::= { securityMgt 4 }
--tacacsMgt OBJECT IDENTIFIER ::= { securityMgt 5 }
--sshMgt OBJECT IDENTIFIER ::= { securityMgt 6 }
--aclMgt OBJECT IDENTIFIER ::= { securityMgt 7 }
--ipFilterMgt OBJECT IDENTIFIER ::= { securityMgt 9 }
----macAuthMgt OBJECT IDENTIFIER ::= { securityMgt 13}
----netAccessMgt OBJECT IDENTIFIER ::= { securityMgt 14}
--
--
--
---- PortSecurityMgt
--
---- Management for Port Security. A secure port only allowes
---- secure MAC addresses to come in.
--
--
--
--portSecPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF PortSecPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The Port Security(MAC bindind) Table"
-- ::= { portSecurityMgt 1 }
--
--portSecPortEntry OBJECT-TYPE
-- SYNTAX PortSecPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry of portSecPortTable"
-- INDEX { portSecPortIndex }
-- ::= { portSecPortTable 1 }
--
--PortSecPortEntry ::= SEQUENCE
--{
-- portSecPortIndex Integer32,
-- portSecPortStatus EnabledStatus,
-- portSecAction INTEGER,
-- portSecMaxMacCount Integer32
--}
--
--portSecPortIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The port and the trunk (excluding trunk members) interface of
-- the portTable. The interface identified by a particular value
-- of this index is the same interface as identified by the same
-- value of ifIndex in the IF-MIB."
-- ::= { portSecPortEntry 1 }
--
--portSecPortStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Set enabled(1) to enable port security and set disabled(2) to
-- disable port security."
-- ::= { portSecPortEntry 2 }
--
--portSecAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- none(1),
-- trap(2),
-- shutdown(3),
-- trapAndShutdown(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The corresponding actions that will take place when a
-- port is under intrusion, when this variable is set to
-- none(1), no action will be performed, when this variable is
-- set to trap(2), a swPortSecurityTrap trap will be sent,
-- when this variable is set to shutdown(3), the port will
-- shutdown, when this variable is set to
-- trapAndShutdown(4), a swPortSecurityTrap will be sent
-- and the port will shutdown."
-- ::= { portSecPortEntry 3 }
--
--portSecMaxMacCount OBJECT-TYPE
-- SYNTAX Integer32(0..1024)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The maximun number of MAC addresses that will be learned and locked.
-- When we change the value of this variable, if the
-- portSecPortStatus is enabled, we will discard all secure MAC
-- and begin to learn again, until the number of MAC has reached
-- this value, and only the secure MAC addresses can enter
-- this port. If the portSecPortStatus is disabled, we will begin
-- to learn the MAC, and auto enabled the portSecPortStatus when
-- the MAC has reached this value."
-- ::= { portSecPortEntry 4 }
--
----
---- radiusMgt
----
--
---- Management for Remote Authentication Dial-In User Service (RADIUS).
----SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS=1: single server
----SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS>1: multiple server
--
--radiusServerGlobalAuthPort OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Aauthentication port number for RADIUS server.
-- When specified radius server do not set
-- aauthentication port number, this value is used."
-- ::= { radiusMgt 1 }
--
--radiusServerGlobalAcctPort OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Accounting port number of RADIUS server.
-- When specified radius server do not set
-- accounting port number, this value is used."
-- ::= { radiusMgt 2 }
--
--radiusServerGlobalKey OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..48))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Key for RADIUS. This variable can only be written.
-- When this variable is read, it always returns a
-- zero-length string.
-- When specified radius server do not set
-- key, this this value is used."
-- ::= { radiusMgt 3 }
--
--radiusServerGlobalRetransmit OBJECT-TYPE
-- SYNTAX INTEGER (1..30)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Maximum number of retransmissions for RADIUS.
-- When specified radius server do not set
-- maximum number of retransmissions, this value is used."
-- ::= { radiusMgt 4 }
--
--radiusServerGlobalTimeout OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Timeout for RADIUS.
-- When specified radius server do not set
-- timeout, this value is used."
-- ::= { radiusMgt 5 }
--
----radiusServerTable
--
--radiusServerTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF RadiusServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for RADIUS server."
-- ::= { radiusMgt 7 }
--
--radiusServerEntry OBJECT-TYPE
-- SYNTAX RadiusServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual row for radiusServerTable."
-- INDEX { radiusServerIndex }
-- ::= { radiusServerTable 1 }
--
--RadiusServerEntry ::= SEQUENCE
--{
-- radiusServerIndex Integer32,
-- radiusServerAddress IpAddress,
-- radiusServerAuthPortNumber Integer32,
-- radiusServerAcctPortNumber Integer32,
-- radiusServerKey DisplayString,
-- radiusServerRetransmit Integer32,
-- radiusServerTimeout Integer32,
-- radiusServerStatus ValidStatus
--}
--
--radiusServerIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The RADIUS server index in the table."
-- ::= { radiusServerEntry 1 }
--
--radiusServerAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "IP address of a RADIUS server."
-- ::= { radiusServerEntry 2 }
--
--radiusServerAuthPortNumber OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Authentication port number of RADIUS server."
-- ::= { radiusServerEntry 3 }
--
--radiusServerAcctPortNumber OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Accounting port number of RADIUS server."
-- ::= { radiusServerEntry 4 }
--
--radiusServerKey OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..48))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Key for RADIUS. This variable can only be written.
-- When this variable is read, it always returns a
-- zero-length string."
-- ::= { radiusServerEntry 5 }
--
--radiusServerRetransmit OBJECT-TYPE
-- SYNTAX Integer32 (1..30)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Timeout for RADIUS."
-- ::= { radiusServerEntry 6 }
--
--radiusServerTimeout OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Timeout for RADIUS."
-- ::= { radiusServerEntry 7 }
--
--radiusServerStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { radiusServerEntry 8 }
--
----
---- tacacsMgt
----
--
---- Management for Terminal Access Controller Access Control System plus (TACACS+).
--
---- Global server setting
--tacacsPlusServerGlobalPortNumber OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "TCP port number of TACACS+ server.
-- When specified TACACS+ server do not set
-- TCP port number, this this value is used."
-- ::= { tacacsMgt 2 }
--
--tacacsPlusServerGlobalKey OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..48))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The encryption key used to encrpt the traffic between client and
-- TACACS+ server. Do not use blank spaces in the string. This variable
-- can only be set. When this variable is read, it always returns a
-- zero-length string.When specified TACACS+ server do not set
-- the encryption key , this this value is used."
-- ::= { tacacsMgt 3 }
--
--tacacsPlusServerTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF TacacsPlusServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for TACACS+ server."
-- ::= { tacacsMgt 4 }
--
--tacacsPlusServerEntry OBJECT-TYPE
-- SYNTAX TacacsPlusServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual row for tacacsPlusServerTable."
-- INDEX { tacacsPlusServerIndex }
-- ::= { tacacsPlusServerTable 1 }
--
--TacacsPlusServerEntry ::= SEQUENCE
--{
-- tacacsPlusServerIndex Integer32,
-- tacacsPlusServerAddress IpAddress,
-- tacacsPlusServerPortNumber Integer32,
-- tacacsPlusServerKey DisplayString,
-- tacacsPlusServerStatus ValidStatus,
-- tacacsPlusServerRetransmit Integer32,
-- tacacsPlusServerTimeout Integer32
--}
--
--tacacsPlusServerIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "TACACS+ server index."
-- ::= { tacacsPlusServerEntry 1 }
--
--tacacsPlusServerAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "IP address of a TACACS+ server."
-- ::= { tacacsPlusServerEntry 2 }
--
--tacacsPlusServerPortNumber OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "TCP port number of a TACACS+ server."
-- ::= { tacacsPlusServerEntry 3 }
--
--tacacsPlusServerKey OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..48))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The encryption key used to encrpt the traffic between client and
-- TACACS+ server. Do not use blank spaces in the string. This
-- variable can only be set. When this variable is read, it always
-- returns a zero-length string."
-- ::= { tacacsPlusServerEntry 4 }
--
--tacacsPlusServerStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { tacacsPlusServerEntry 8 }
--
--tacacsPlusServerRetransmit OBJECT-TYPE
-- SYNTAX Integer32 (1..30)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The maximum number of retransmissions for TACACS+."
-- ::= { tacacsPlusServerEntry 9 }
--
--tacacsPlusServerTimeout OBJECT-TYPE
-- SYNTAX Integer32 (1..540)
-- UNITS "seconds"
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Timeout for TACACS+."
-- ::= { tacacsPlusServerEntry 10 }
--
--tacacsPlusServerGlobalRetransmit OBJECT-TYPE
-- SYNTAX Integer32 (1..30)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The maximum number of retransmissions for TACACS+ global server."
-- ::= { tacacsMgt 5 }
--
--tacacsPlusServerGlobalTimeout OBJECT-TYPE
-- SYNTAX Integer32 (1..540)
-- UNITS "seconds"
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION " Timeout for TACACS+ global server."
-- ::= { tacacsMgt 6 }
--
----
---- sshMgt
----
--
---- Management for Secure Shell Configuration
--
--sshServerStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The status of Secure Shell Server. Set this value to
-- enabled(1) to enable SSH server, set this value to
-- disabled(2) to disable the SSH server."
-- ::= { sshMgt 1 }
--
--sshServerMajorVersion OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The major version of the SSH Server."
-- ::= { sshMgt 2 }
--
--sshServerMinorVersion OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The minor version of the SSH Server."
-- ::= { sshMgt 3 }
--
--sshTimeout OBJECT-TYPE
-- SYNTAX INTEGER(1..120)
-- UNITS "seconds"
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The time interval that the router waits for the SSH
-- client to respond. The range is 1-120."
-- ::= { sshMgt 4 }
--
--sshAuthRetries OBJECT-TYPE
-- SYNTAX INTEGER(1..5)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The number of attempts after which the interface is reset.
-- The range is 1-5."
-- ::= { sshMgt 5 }
--
--sshConnInfoTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SshConnInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for Secure Shell Connection."
-- ::= { sshMgt 6 }
--
--sshConnInfoEntry OBJECT-TYPE
-- SYNTAX SshConnInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual row for sshConnInfoTable."
-- INDEX { sshConnID }
-- ::= { sshConnInfoTable 1 }
--
--SshConnInfoEntry ::= SEQUENCE
--{
----both sshv1 & sshv2 start
-- sshConnID Integer32,
-- sshConnMajorVersion Integer32,
-- sshConnMinorVersion Integer32,
-- sshConnStatus INTEGER,
----both sshv1 & sshv2 end
----both sshv1 & sshv2 start
-- sshConnUserName DisplayString,
-- sshDisconnect INTEGER,
----both sshv1 & sshv2 end
----sshv2 only start
-- sshConnEncryptionTypeStr DisplayString
----sshv2 only end
--}
--
----both sshv1 & sshv2 start
--sshConnID OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The connection ID of the Secure Shell Connection."
-- ::= { sshConnInfoEntry 1 }
--
--sshConnMajorVersion OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The SSH major version."
-- ::= { sshConnInfoEntry 2 }
--
--sshConnMinorVersion OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The SSH minor version."
-- ::= { sshConnInfoEntry 3 }
--
--sshConnStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- negotiationStart(1),
-- authenticationStart(2),
-- sessionStart(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The SSH connection State. negotiationStart(1) means the
-- SSH is in its negotiation start state, authenticationStart(2)
-- means the SSH is in authentication start state, sessionStart(3)
-- means the SSH is in session start State."
-- ::= { sshConnInfoEntry 5 }
--
----both sshv1 & sshv2 end
--
--
----both sshv1 & sshv2 start
--
--sshConnUserName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(1..8))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The user name of the connection."
-- ::= { sshConnInfoEntry 6 }
--
--sshDisconnect OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noDisconnect(1),
-- disconnect(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Set the variable to disconnect the connection,
-- noDisconnect(1) will always be obtained when reading this variable."
-- ::= { sshConnInfoEntry 7 }
--
----both sshv1 & sshv2 end
--
----sshv2 only start
--sshConnEncryptionTypeStr OBJECT-TYPE
--SYNTAX DisplayString(SIZE(0..64))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The encryption type of the SSH."
-- ::= { sshConnInfoEntry 8 }
--
--
--sshKeySize OBJECT-TYPE
-- SYNTAX INTEGER(512..896)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The SSH server key size."
-- ::= { sshMgt 7 }
--
--
--sshRsaHostKey1 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 1."
-- ::= { sshMgt 8 }
--
--sshRsaHostKey2 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 2."
-- ::= { sshMgt 9 }
--
--sshRsaHostKey3 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 3."
-- ::= { sshMgt 10 }
--
--sshRsaHostKey4 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 4."
-- ::= { sshMgt 11 }
--
--sshRsaHostKey5 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 5."
-- ::= { sshMgt 12 }
--
--sshRsaHostKey6 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 6."
-- ::= { sshMgt 13 }
--
--sshRsaHostKey7 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 7."
-- ::= { sshMgt 14 }
--
--sshRsaHostKey8 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The RSA host key segment 8."
-- ::= { sshMgt 15 }
--
--sshDsaHostKey1 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 1."
-- ::= { sshMgt 16 }
--
--sshDsaHostKey2 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 2."
-- ::= { sshMgt 17 }
--
--sshDsaHostKey3 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 3."
-- ::= { sshMgt 18 }
--
--sshDsaHostKey4 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 4."
-- ::= { sshMgt 19 }
--
--sshDsaHostKey5 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 5."
-- ::= { sshMgt 20 }
--
--sshDsaHostKey6 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 6."
-- ::= { sshMgt 21 }
--
--sshDsaHostKey7 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 7."
-- ::= { sshMgt 22 }
--
--sshDsaHostKey8 OBJECT-TYPE
-- SYNTAX KeySegment
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DSA host key segment 8."
-- ::= { sshMgt 23 }
--
--sshHostKeyGenAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noGen(1),
-- genRsaKey(2),
-- genDsaKey(3),
-- genBothKeys(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This variable is for host key generating.
--
-- For the set behavior:
-- Set it to genRsaKey(2) to generate the RSA host key,
-- and to genDsaKey(3) to generate the DSA host key,
-- if genBothKeys(4) is set, both RSA and DSA host key are
-- generated.
--
-- For the get behavior:
-- You will get genRsaKey(2), genDsaKey(3) or
-- genBothKeys(4) when the key gen action is in progress.
-- otherwise, you will get noGen(1)."
-- ::= { sshMgt 24 }
--
--sshHostKeyGenStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- unknown(1),
-- success(2),
-- failure(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The result of the last KeyGen status.
-- if no key gen action has been performed.
-- you will get unknown(1) status."
-- ::= { sshMgt 25 }
--
--sshHostKeySaveAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noSave(1),
-- save(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "To save host key from memory to flash.
--
-- For the set behavior:
-- Set it to save(2) to perform the save operation.
--
-- For the get behavior:
-- You will get save(1) when the save action is in progress.
-- Otherwise, you will get noSave(1)."
-- ::= { sshMgt 26 }
--
--sshHostKeySaveStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- unknown(1),
-- success(2),
-- failure(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The result of the last savekey status.
-- If no save action has been performed,
-- you will get unknown(1) status."
-- ::= { sshMgt 27 }
--
--sshHostKeyDelAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noDel(1),
-- delRsaKey(2),
-- delDsaKey(3),
-- delBothKeys(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "To delete the host key.
--
-- For the set behavior:
-- Set it to delRsaKey(2) to delete the RSA host key,
-- to delDsaKey(3) to delete the DSA host key,
-- or to delBothKeys(4) to delete both RSA and DSA host key.
--
-- For the get behavior:
-- You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
-- when the delete operation is in progress.
-- Otherwise, you will get noDel(1)."
-- ::= { sshMgt 28 }
--
----sshUserTable OBJECT-TYPE
---- SYNTAX SEQUENCE OF SshUserEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION "The conceptual table of all of sshUserEntry."
---- ::= { sshMgt 29 }
----
----sshUserEntry OBJECT-TYPE
---- SYNTAX SshUserEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION "The conceptual row for sshUserTable."
---- INDEX { IMPLIED sshUserName}
---- ::= { sshUserTable 1 }
----
----SshUserEntry ::= SEQUENCE
----{
---- sshUserName DisplayString,
---- sshUserRsaKey1 KeySegment,
---- sshUserRsaKey2 KeySegment,
---- sshUserRsaKey3 KeySegment,
---- sshUserRsaKey4 KeySegment,
---- sshUserRsaKey5 KeySegment,
---- sshUserRsaKey6 KeySegment,
---- sshUserRsaKey7 KeySegment,
---- sshUserRsaKey8 KeySegment,
---- sshUserDsaKey1 KeySegment,
---- sshUserDsaKey2 KeySegment,
---- sshUserDsaKey3 KeySegment,
---- sshUserDsaKey4 KeySegment,
---- sshUserDsaKey5 KeySegment,
---- sshUserDsaKey6 KeySegment,
---- sshUserDsaKey7 KeySegment,
---- sshUserDsaKey8 KeySegment,
---- sshUserKeyDelAction INTEGER
----}
----
----sshUserName OBJECT-TYPE
---- SYNTAX DisplayString(SIZE(1..8))
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION "User Name."
---- ::= { sshUserEntry 1 }
----
----sshUserRsaKey1 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 1."
---- ::= { sshUserEntry 2 }
----
----sshUserRsaKey2 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 2."
---- ::= { sshUserEntry 3 }
----
----sshUserRsaKey3 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 3."
---- ::= { sshUserEntry 4 }
----
----sshUserRsaKey4 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 4."
---- ::= { sshUserEntry 5 }
----
----sshUserRsaKey5 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 5."
---- ::= { sshUserEntry 6 }
----
----sshUserRsaKey6 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 6."
---- ::= { sshUserEntry 7 }
----
----sshUserRsaKey7 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 7."
---- ::= { sshUserEntry 8 }
----
----sshUserRsaKey8 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The RSA user key segment 8."
---- ::= { sshUserEntry 9 }
----
----sshUserDsaKey1 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 1."
---- ::= { sshUserEntry 10 }
----
----sshUserDsaKey2 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 2."
---- ::= { sshUserEntry 11 }
----
----sshUserDsaKey3 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 3."
---- ::= { sshUserEntry 12 }
----
----sshUserDsaKey4 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 4."
---- ::= { sshUserEntry 13 }
----
----sshUserDsaKey5 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 5."
---- ::= { sshUserEntry 14 }
----
----sshUserDsaKey6 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 6."
---- ::= { sshUserEntry 15 }
----
----sshUserDsaKey7 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 7."
---- ::= { sshUserEntry 16 }
----
----sshUserDsaKey8 OBJECT-TYPE
---- SYNTAX KeySegment
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION "The DSA user key segment 8."
---- ::= { sshUserEntry 17 }
----
----sshUserKeyDelAction OBJECT-TYPE
---- SYNTAX INTEGER
---- {
---- noDel(1),
---- delRsaKey(2),
---- delDsaKey(3),
---- delBothKeys(4)
---- }
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION "To delete the user key.
----
---- For the set behavior:
---- Set it to delRsaKey(2) to delete the RSA user key,
---- to delDsaKey(3) to delete the DSA user key,
---- or to delBothKeys(4) to delete both RSA and DSA user key.
----
---- For the get behavior:
---- You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
---- when the delete operation is in progress.
---- Otherwise, you will get noDel(1)."
---- ::= { sshUserEntry 18 }
----
----
---- aclMgt
----
--
----aclIpAceTable
--aclIpAceTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AclIpAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual table of all of aclIpAceEntry."
-- ::= { aclMgt 1 }
--
--aclIpAceEntry OBJECT-TYPE
-- SYNTAX AclIpAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual row for aclIpAceTable."
-- INDEX { aclIpAceName, aclIpAceIndex }
-- ::= { aclIpAceTable 1 }
--
--AclIpAceEntry ::= SEQUENCE
--{
-- aclIpAceName DisplayString,
-- aclIpAceIndex Integer32,
-- aclIpAcePrecedence Integer32,
-- aclIpAceAction INTEGER,
-- aclIpAceSourceIpAddr IpAddress,
-- aclIpAceSourceIpAddrBitmask IpAddress,
-- aclIpAceDestIpAddr IpAddress,
-- aclIpAceDestIpAddrBitmask IpAddress,
-- aclIpAceProtocol Integer32,
-- aclIpAcePrec Integer32,
-- aclIpAceTos Integer32,
-- aclIpAceDscp Integer32,
-- aclIpAceSourcePortOp INTEGER,
-- aclIpAceMinSourcePort Integer32,
-- aclIpAceMaxSourcePort Integer32,
-- aclIpAceDestPortOp INTEGER,
-- aclIpAceMinDestPort Integer32,
-- aclIpAceMaxDestPort Integer32,
-- aclIpAceControlCode Integer32,
-- aclIpAceControlCodeBitmask Integer32,
-- aclIpAceStatus RowStatus
--}
--
--aclIpAceName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(1..15))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The name of an ACL. Within a feature a unique
-- name is used to identify
-- the list to which the entry belongs in the device."
-- ::= { aclIpAceEntry 1 }
--
--aclIpAceIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..32)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The unique index of an ACE within an ACL."
-- ::= { aclIpAceEntry 2 }
--
--aclIpAcePrecedence OBJECT-TYPE
-- SYNTAX Integer32 (0..32)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Specifies the IP precedence value to be matched against.
-- This object cannot not be configured when the status of the
-- entry, aclIpAceStatus, is active(1)."
-- ::= { aclIpAceEntry 3 }
--
--aclIpAceAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- permit(1),
-- deny(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
-- This object cannot not be configured when the status of the
-- entry, aclIpAceStatus, is active(1)."
-- ::= { aclIpAceEntry 4 }
--
--aclIpAceSourceIpAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified source IP address. The packet's source address is
-- AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared
-- against the value of this object.
-- This object cannot be configured when the status of the
-- entry, aclIpAceStatus, is active(1)."
-- ::= { aclIpAceEntry 5 }
--
--aclIpAceSourceIpAddrBitmask OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified source IP address mask. The packet's destination
-- address is AND-ed with the value of aclIpAceSourceIpAddr and then
-- compared against the value of this object."
-- ::= { aclIpAceEntry 6 }
--
--aclIpAceDestIpAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified destination IP address.
-- The packet's destination address is
-- AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared
-- against the value of this object."
-- ::= { aclIpAceEntry 7 }
--
--aclIpAceDestIpAddrBitmask OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified destination IP address mask."
-- ::= { aclIpAceEntry 8 }
--
--aclIpAceProtocol OBJECT-TYPE
-- SYNTAX Integer32 (0..256)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The protocol number field in the IP header used to indicate
-- the higher layer protocol as specified in RFC 1700. A value
-- value of 0 matches every IP packet. The object=256, means 'any'
--
-- For example :
-- 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
-- 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
-- 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
-- 103 is PIMv2, 108 is PCP. "
-- ::= { aclIpAceEntry 9 }
--
--aclIpAcePrec OBJECT-TYPE
-- SYNTAX Integer32 (0..8)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the IP precedence value to be matched against.
-- This object cannot be configured when the status of the
-- entry, aclIpAceStatus, is active(1).
-- The value of this object is ignored whenever the value of
-- aclIpAcePrec object is 8."
-- ::= { aclIpAceEntry 10 }
--
--aclIpAceTos OBJECT-TYPE
-- SYNTAX Integer32 (0..16)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the IP ToS facility value to be matched against.
-- This object cannot be configured when the status of the
-- entry, aclIpAceStatus, is active(1).
-- The value of this object is ignored whenever the value of
-- aclIpAcePrec object is 9."
-- ::= { aclIpAceEntry 11 }
--
--aclIpAceDscp OBJECT-TYPE
-- SYNTAX Integer32 (0..64)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the DSCP value to be matched against.
-- This object cannot be configured when the status of the
-- entry, aclIpAceStatus, is active(1).
-- The value of this object is ignored whenever the value of
-- aclIpAcePrec object is 64."
-- ::= { aclIpAceEntry 12 }
--
--aclIpAceSourcePortOp OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noOperator(1),
-- equal(2),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's source TCP/UDP port number is
-- to be compared. noOperator(1), which is the default value, means no
-- comparison is to be made with the source TCP/UDP port
-- number."
-- ::= { aclIpAceEntry 13 }
--
--aclIpAceMinSourcePort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
-- this indicates the lower bound of the TCP/UDP port number value range."
-- ::= { aclIpAceEntry 14 }
--
--aclIpAceMaxSourcePort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
-- this indicates the upper bound of the TCP/UDP port number value range."
-- ::= { aclIpAceEntry 15 }
--
--aclIpAceDestPortOp OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noOperator(1),
-- equal(2),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
-- to be compared. noOperator(1), which is the default value, means that no
-- comparison is to be made with the destination TCP/UDP port
-- number."
-- ::= { aclIpAceEntry 17 }
--
--aclIpAceMinDestPort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the aclIpAceDestPortOp is range(3),
-- this indicates the lower bound of the TCP/UDP port number value range."
-- ::= { aclIpAceEntry 18 }
--
--aclIpAceMaxDestPort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the aclIpAceDestPortOp is range(3),
-- this indicates the upper bound of the TCP/UDP port number value range."
-- ::= { aclIpAceEntry 19 }
--
--aclIpAceControlCode OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
-- aceIpControlCode is AND-ed with aceIpControlCodeBitmask."
-- ::= { aclIpAceEntry 21 }
--
--aclIpAceControlCodeBitmask OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
-- It can be used to check multiple flags of the
-- FIN, SYN, RST, PSH, ACK, URG by the sum of
-- FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32."
-- ::= { aclIpAceEntry 22 }
--
--aclIpAceStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row entry. This object isused to manage the
-- creation and deletion of conceptual rows.
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has value 'active');
-- it is not available for use by the managed device, though
-- the agent has sufficient information to make it so (the
-- status column has value 'notInService'); or, it is not
-- available for use by the managed device, and an attempt to
-- make it so would fail because the agent has insufficient
-- information (the state column has value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { aclIpAceEntry 23 }
--
---- aclMacAceTable
--aclMacAceTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AclMacAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual table of all of aclMacAceEntry."
-- ::= { aclMgt 2 }
--
--aclMacAceEntry OBJECT-TYPE
-- SYNTAX AclMacAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual row for aclMacAceTable. "
-- INDEX { aclMacAceName, aclMacAceIndex }
-- ::= { aclMacAceTable 1 }
--
--AclMacAceEntry ::= SEQUENCE
--{
-- aclMacAceName DisplayString,
-- aclMacAceIndex Integer32,
-- aclMacAcePrecedence Integer32,
-- aclMacAceAction INTEGER,
-- aclMacAcePktformat INTEGER,
-- aclMacAceSourceMacAddr OCTET STRING,
-- aclMacAceSourceMacAddrBitmask OCTET STRING,
-- aclMacAceDestMacAddr OCTET STRING,
-- aclMacAceDestMacAddrBitmask OCTET STRING,
-- aclMacAceVidOp INTEGER,
-- aclMacAceMinVid Integer32,
-- aclMacAceMaxVid Integer32,
-- aclMacAceEtherTypeOp INTEGER,
-- aclMacAceMinEtherType Integer32,
-- aclMacAceMaxEtherType Integer32,
-- aclMacAceStatus RowStatus
--}
--
--aclMacAceName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(1..15))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The name of an ACL. Within a feature, a unique
-- name is used to identify
-- the list to which the entry belongs in the device."
-- ::= { aclMacAceEntry 1 }
--
--aclMacAceIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..32)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The unique index of an ACE within an ACL."
-- ::= { aclMacAceEntry 2 }
--
--aclMacAcePrecedence OBJECT-TYPE
-- SYNTAX Integer32 (0..32)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Specifies the entry's precedence."
-- ::= { aclMacAceEntry 3 }
--
--aclMacAceAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- permit(1),
-- deny(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 4 }
--
--aclMacAcePktformat OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- any(1),
-- untagged-Eth2(2),
-- untagged802Dot3(3),
-- tagggedEth2(4),
-- tagged802Dot3(5)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Used to check the packet format of the packets.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 5 }
--
--aclMacAceSourceMacAddr OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (6))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the 48-bit destination MAC address.
-- The specified source MAC of the packet The packet's source MAC
-- address is AND-ed with the value of aceMacSourceMacAddrBitmask
-- and then compared against the value of this object. This object
-- cannot be configured when the status of the entry,
-- aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 6 }
--
--aclMacAceSourceMacAddrBitmask OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (6))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified source MAC address mask.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 7 }
--
--aclMacAceDestMacAddr OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (6))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the 48-bit destination MAC address.
-- The specified destination MAC of the packet.
-- The packet's destination MAC address is
-- AND-ed with the value of aceMacDestMacAddrBitmask and then compared
-- against the value of this object.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 8 }
--
--aclMacAceDestMacAddrBitmask OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (6))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified destination MAC address mask.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 9 }
--
--aclMacAceVidOp OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noOperator(1),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's vid is
-- to be compared.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 10 }
--
--aclMacAceMinVid OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3).
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 11 }
--
--aclMacAceMaxVid OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3).
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 13 }
--
--aclMacAceEtherTypeOp OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noOperator(1),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's ethertype is
-- to be compared.
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 14 }
--
--aclMacAceMinEtherType OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 16 }
--
--aclMacAceMaxEtherType OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the upper bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
-- This object cannot be configured when the status of the
-- entry, aclMacAceStatus, is active(1)."
-- ::= { aclMacAceEntry 17 }
--
--aclMacAceStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row entry. This object isused to manage the
-- creation and deletion of conceptual rows.
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has value 'active');
-- it is not available for use by the managed device, though
-- the agent has sufficient information to make it so (the
-- status column has value 'notInService'); or, it is not
-- available for use by the managed device, and an attempt to
-- make it so would fail because the agent has insufficient
-- information (the state column has value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { aclMacAceEntry 18 }
--
----aclAclGroupTable
--aclAclGroupTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AclAclGroupEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual table of aclAclGroupEntry."
-- ::= { aclMgt 3 }
--
--aclAclGroupEntry OBJECT-TYPE
-- SYNTAX AclAclGroupEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The conceptual row for aclAclGroupTable."
-- INDEX { aclAclGroupIfIndex }
-- ::= { aclAclGroupTable 1 }
--
--AclAclGroupEntry ::= SEQUENCE
--{
-- aclAclGroupIfIndex Integer32,
-- aclAclGroupIngressIpAcl DisplayString,
-- aclAclGroupEgressIpAcl DisplayString,
-- aclAclGroupIngressMacAcl DisplayString,
-- aclAclGroupEgressMacAcl DisplayString
--}
--
--aclAclGroupIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The interface number specifying the ACL binding to."
-- ::= { aclAclGroupEntry 1 }
--
--aclAclGroupIngressIpAcl OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..15))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the ingress IP ACL(standard or extended) binding to the interface."
-- ::= { aclAclGroupEntry 2 }
--
--aclAclGroupEgressIpAcl OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..15))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the egress IP ACL(standard or extended) binding to the interface.But it
-- is not supported in LEO product."
-- ::= { aclAclGroupEntry 3 }
--
--aclAclGroupIngressMacAcl OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..15))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the ingress MAC ACL binding to the interface."
-- ::= { aclAclGroupEntry 4 }
--
--aclAclGroupEgressMacAcl OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..15))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the egress MAC ACL binding to the interface.But it is not supported
-- in LEO product."
-- ::= { aclAclGroupEntry 5 }
--
----
---- ipFilterMgt
----
--
----ipFilterSnmpTable
--ipFilterSnmpTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IpFilterSnmpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of IP address entries."
-- ::= { ipFilterMgt 1 }
--
--ipFilterSnmpEntry OBJECT-TYPE
-- SYNTAX IpFilterSnmpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This entry includes an IP address range which the system
-- will allow to connect to this device through SNMP."
-- INDEX { ipFilterSnmpStartAddress }
-- ::= { ipFilterSnmpTable 1 }
--
--IpFilterSnmpEntry ::= SEQUENCE {
-- ipFilterSnmpStartAddress IpAddress,
-- ipFilterSnmpEndAddress IpAddress,
-- ipFilterSnmpStatus ValidStatus
-- }
--
--ipFilterSnmpStartAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The start IP address."
-- ::= { ipFilterSnmpEntry 1 }
--
--ipFilterSnmpEndAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The end IP address."
-- ::= { ipFilterSnmpEntry 2 }
--
--ipFilterSnmpStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { ipFilterSnmpEntry 3 }
--
----ipFilterHTTPTable
--ipFilterHTTPTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IpFilterHTTPEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of IP address entries."
-- ::= { ipFilterMgt 2 }
--
--ipFilterHTTPEntry OBJECT-TYPE
-- SYNTAX IpFilterHTTPEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This entry includes an IP address range which the system
-- will allow to connect to this device through SNMP."
-- INDEX { ipFilterHTTPStartAddress }
-- ::= { ipFilterHTTPTable 1 }
--
--IpFilterHTTPEntry ::= SEQUENCE {
-- ipFilterHTTPStartAddress IpAddress,
-- ipFilterHTTPEndAddress IpAddress,
-- ipFilterHTTPStatus ValidStatus
--}
--
--ipFilterHTTPStartAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The start IP address."
-- ::= { ipFilterHTTPEntry 1 }
--
--ipFilterHTTPEndAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The end IP address."
-- ::= { ipFilterHTTPEntry 2 }
--
--ipFilterHTTPStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { ipFilterHTTPEntry 3 }
--
----ipFilterTelnetTable
--ipFilterTelnetTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IpFilterTelnetEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of IP address entries."
-- ::= { ipFilterMgt 3 }
--
--ipFilterTelnetEntry OBJECT-TYPE
-- SYNTAX IpFilterTelnetEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This entry includes an IP address range which the system
-- will allow them to connect to this device through SNMP."
-- INDEX { ipFilterTelnetStartAddress }
-- ::= { ipFilterTelnetTable 1 }
--
--IpFilterTelnetEntry ::= SEQUENCE {
-- ipFilterTelnetStartAddress IpAddress,
-- ipFilterTelnetEndAddress IpAddress,
-- ipFilterTelnetStatus ValidStatus
--}
--
--ipFilterTelnetStartAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The start IP address."
-- ::= { ipFilterTelnetEntry 1 }
--
--ipFilterTelnetEndAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The end IP address."
-- ::= { ipFilterTelnetEntry 2 }
--
--ipFilterTelnetStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { ipFilterTelnetEntry 3 }
--
----
----macAuthMgt
----
--
----macAuthReauthTime OBJECT-TYPE
---- SYNTAX Unsigned32(120..1000000)
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "The time, in seconds, after which an authenticated MAC address
---- is reauthenticated."
---- ::= { macAuthMgt 1 }
--
----
----netAccessMgt
----
--
----netAccessPortTable OBJECT-TYPE
---- SYNTAX SEQUENCE OF NetAccessPortEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the attributes and functions of secure ports."
---- ::= { netAccessMgt 1 }
----
----netAccessPortEntry OBJECT-TYPE
---- SYNTAX NetAccessPortEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "A conceptual row of the netAccessPortTable."
---- INDEX { netAccessPortIfIndex }
---- ::= { netAccessPortTable 1 }
----
----NetAccessPortEntry ::= SEQUENCE
----{
---- netAccessPortIfIndex InterfaceIndex,
---- netAccessPortMode INTEGER,
---- netAccessPortMaxMacCount Unsigned32(1..32),
---- netAccessPortFilterId Unsigned32(0..64),
---- netAccessPortDynamicVlanEnable EnabledStatus
----}
----
----netAccessPortIfIndex OBJECT-TYPE
---- SYNTAX InterfaceIndex
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the index for the netAccessPortTable entry.
---- This is defined as ifIndex in the IF-MIB."
---- ::= { netAccessPortEntry 1 }
----
----netAccessPortMode OBJECT-TYPE
---- SYNTAX INTEGER
---- {
---- noRestrictions(1),
---- macAuthentication(6)
---- }
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "This variable determines the secure mode of a port.
---- In non-secure port mode, this variable has a value of
---- noRestrictions(1) and MAC authentication is disabled for the
---- port. In secure port mode, this variable has a value of
---- macAuthentication(6), and MAC authentication is enabled for
---- the port."
---- ::= { netAccessPortEntry 2 }
----
----netAccessPortMaxMacCount OBJECT-TYPE
---- SYNTAX Unsigned32(1..1024)
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "The maximum number of MAC addresses that can be learned by
---- the secure port. This value can be set by user after setting
---- netAccessPortMode macAuthentication(6). The value range
---- is between 1 and 1024. The value 1024 indicates no limit to
---- the number of MAC addresses that can be learned."
---- ::= { netAccessPortEntry 3 }
----
----netAccessPortFilterId OBJECT-TYPE
---- SYNTAX Unsigned32(0..64)
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "Creates a MAC address filter that can be applied to one
---- port. The filter cannot be applied to multiple ports. The
---- filter ID range is between 0 and 64. Using filter ID 0
---- removes the filter from the port."
---- ::= { netAccessPortEntry 4 }
----
----netAccessPortDynamicVlanEnable OBJECT-TYPE
---- SYNTAX EnabledStatus
---- MAX-ACCESS read-write
---- STATUS current
---- DESCRIPTION
---- "Enables secure dynamic VLAN assignment. VLAN IDs are assigned
---- from a configured RADIUS server."
---- ::= { netAccessPortEntry 5 }
----
----netAccessMacFilterTable OBJECT-TYPE
---- SYNTAX SEQUENCE OF NetAccessMacFilterEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the relationship between filters and MAC addresses."
---- ::= { netAccessMgt 2 }
----
----netAccessMacFilterEntry OBJECT-TYPE
---- SYNTAX NetAccessMacFilterEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "A conceptual row of the netAccessMacFilterTable."
---- INDEX { netAccessMacFilterId, netAccessMacFilterMacAddr }
---- ::= { netAccessMacFilterTable 1 }
----
----NetAccessMacFilterEntry ::= SEQUENCE
----{
---- netAccessMacFilterId Unsigned32,
---- netAccessMacFilterMacAddr MacAddress,
---- netAccessMacFilterStatus ValidStatus
----}
----
----netAccessMacFilterId OBJECT-TYPE
---- SYNTAX Unsigned32(1..64)
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the filter ID for the netAccessMacFilterTable entry."
---- ::= { netAccessMacFilterEntry 1 }
----
----netAccessMacFilterMacAddr OBJECT-TYPE
---- SYNTAX MacAddress
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the MAC address for the netAccessMacFilterTable
---- entry."
---- ::= { netAccessMacFilterEntry 2 }
----
----netAccessMacFilterStatus OBJECT-TYPE
---- SYNTAX ValidStatus
---- MAX-ACCESS read-create
---- STATUS current
---- DESCRIPTION
---- "Set this to valid(1) creates an entry.
---- Set this to invalid(2) destroys an entry."
---- ::= { netAccessMacFilterEntry 3 }
----
----netAccessMacAddrTable OBJECT-TYPE
---- SYNTAX SEQUENCE OF NetAccessMacAddrEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "The table of authenticated MAC addresses for this switch's
---- port and MAC address."
---- ::= { netAccessMgt 3 }
----
----netAccessMacAddrEntry OBJECT-TYPE
---- SYNTAX NetAccessMacAddrEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "A conceptual row of the netAccessMacAddrTable."
---- INDEX { netAccessMacAddrPortIfIndex, netAccessMacAddr }
---- ::= { netAccessMacAddrTable 1 }
----
----NetAccessMacAddrEntry ::= SEQUENCE
----{
---- netAccessMacAddrPortIfIndex InterfaceIndex,
---- netAccessMacAddr MacAddress,
---- netAccessMacAddrRadiusServer IpAddress,
---- netAccessMacAddrTime TimeTicks,
---- netAccessMacAddrAttribute INTEGER
----}
----
----netAccessMacAddrPortIfIndex OBJECT-TYPE
---- SYNTAX InterfaceIndex
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the filter ID for the netAccessMacAddrTable entry.
---- This is defined as ifIndex in the IF-MIB."
---- ::= { netAccessMacAddrEntry 1 }
----
----netAccessMacAddr OBJECT-TYPE
---- SYNTAX MacAddress
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION
---- "Specifies the MAC address for the netAccessMacAddrTable entry."
---- ::= { netAccessMacAddrEntry 2 }
----
----netAccessMacAddrRadiusServer OBJECT-TYPE
---- SYNTAX IpAddress
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION
---- "This represents the relationship of the RADIUS server and MAC
---- addresses. The value is the IP address of the RADIUS server."
---- ::= { netAccessMacAddrEntry 3 }
----
----netAccessMacAddrTime OBJECT-TYPE
---- SYNTAX TimeTicks
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION
---- "The value is the time in seconds since the MAC address was
---- authenticated. The MAC address is authenticated by the
---- RADIUS server."
---- ::= { netAccessMacAddrEntry 4 }
----
----netAccessMacAddrAttribute OBJECT-TYPE
---- SYNTAX INTEGER
---- {
---- static(1),
---- dynamic(2)
---- }
---- MAX-ACCESS read-only
---- STATUS current
---- DESCRIPTION
---- "Indicates how the MAC address was obtained by the system.
---- static(1): Added by a user.
---- dynamic(2): Learned by the switch."
---- ::= { netAccessMacAddrEntry 5 }
--
--
----
---- sysLogMgt
----
--
--sysLogStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether system log is enabled."
-- ::= { sysLogMgt 1 }
--
--sysLogHistoryFlashLevel OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Severity level for logging to flash."
-- ::= { sysLogMgt 2 }
--
--sysLogHistoryRamLevel OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Severity level for logging to RAM."
-- ::= { sysLogMgt 3 }
--
--remoteLogMgt OBJECT IDENTIFIER ::= { sysLogMgt 6 }
--
--remoteLogStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Whether the remote log system is enabled."
-- ::= { remoteLogMgt 1 }
--
--remoteLogLevel OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Severity level for remote log."
-- ::= { remoteLogMgt 2 }
--
--remoteLogFacilityType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- localUse0(16),
-- localUse1(17),
-- localUse2(18),
-- localUse3(19),
-- localUse4(20),
-- localUse5(21),
-- localUse6(22),
-- localUse7(23)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION " The FacilityType for remote log."
-- ::= { remoteLogMgt 3 }
--
--remoteLogServerTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF RemoteLogServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A Table for storing the remote log Server list."
-- ::= { remoteLogMgt 4 }
--
--remoteLogServerEntry OBJECT-TYPE
-- SYNTAX RemoteLogServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptually row for remoteLogServerTable."
-- INDEX { remoteLogServerIp }
-- ::= { remoteLogServerTable 1 }
--
--RemoteLogServerEntry ::= SEQUENCE
--{
-- remoteLogServerIp IpAddress,
-- remoteLogServerStatus ValidStatus
--}
--
--remoteLogServerIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The IP address of the remote log Server."
-- ::= { remoteLogServerEntry 1 }
--
--remoteLogServerStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { remoteLogServerEntry 2 }
--
----
----smtpMgt
----
--smtpMgt OBJECT IDENTIFIER ::= { sysLogMgt 7 }
--
--smtpStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Set enabled(1) to enable the SMTP, set disabled(2) to disable
-- the SMTP."
-- ::= { smtpMgt 1 }
--
--smtpSeverityLevel OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specify the SMTP minimum severity level to send the event message."
-- ::= { smtpMgt 2 }
--
--smtpSourceEMail OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..41))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "SMTP source email address,
-- the sender's mail address that appears
-- in the 'From' field of the mail."
-- ::= { smtpMgt 3 }
--
----smtpServerIpTable
--
--smtpServerIpTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SmtpServerIpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The SMTP server IP table.
-- The maximum servers to be added is 3."
-- ::= { smtpMgt 4 }
--
--smtpServerIpEntry OBJECT-TYPE
-- SYNTAX SmtpServerIpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row of the smtpServerIpTable."
-- INDEX { smtpServerIp }
-- ::= { smtpServerIpTable 1 }
--
--SmtpServerIpEntry ::= SEQUENCE
--{
-- smtpServerIp IpAddress,
-- smtpServerIpStatus ValidStatus
--}
--
--smtpServerIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS accessible-for-notify
-- STATUS current
-- DESCRIPTION "SMTP mail server's IP address."
-- ::= { smtpServerIpEntry 1 }
--
--smtpServerIpStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { smtpServerIpEntry 2 }
--
----smtpDestEMailTable
--
--smtpDestEMailTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SmtpDestEMailEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table of the destination e-mail address.
-- The maximum numbers of destination email address to be added is 5."
-- ::= { smtpMgt 5}
--
--smtpDestEMailEntry OBJECT-TYPE
-- SYNTAX SmtpDestEMailEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row of the smtpDestEMailTable."
-- INDEX { smtpDestEMail }
-- ::= { smtpDestEMailTable 1 }
--
--SmtpDestEMailEntry ::= SEQUENCE
--{
-- smtpDestEMail DisplayString,
-- smtpDestEMailStatus ValidStatus
--}
--
--smtpDestEMail OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..41))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "SMTP destination e-mail address."
-- ::= { smtpDestEMailEntry 1 }
--
--smtpDestEMailStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { smtpDestEMailEntry 2 }
--
----smtpServerHostTable
----
----smtpServerHostTable OBJECT-TYPE
---- SYNTAX SEQUENCE OF SmtpServerHostEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION "The SMTP server table.
---- The maximum servers to be added is 3."
---- ::= { smtpMgt 6 }
----
----smtpServerHostEntry OBJECT-TYPE
---- SYNTAX SmtpServerHostEntry
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION "A conceptual row of the smtpServerHostTable."
---- INDEX { smtpServerHostName }
---- ::= { smtpServerHostTable 1 }
----
----SmtpServerHostEntry ::= SEQUENCE
----{
---- smtpServerHostName DisplayString,
---- smtpServerHostStatus ValidStatus
----}
----
----smtpServerHostName OBJECT-TYPE
---- SYNTAX DisplayString(SIZE(0..255))
---- MAX-ACCESS not-accessible
---- STATUS current
---- DESCRIPTION "IP address or DNS of SMTP mail servers."
---- ::= { smtpServerHostEntry 1 }
----
----smtpServerHostStatus OBJECT-TYPE
---- SYNTAX ValidStatus
---- MAX-ACCESS read-create
---- STATUS current
---- DESCRIPTION "Setting this to valid(1) creates an entry.
---- Setting this to invalid(2) destroys an entry."
---- ::= { smtpServerHostEntry 2 }
----
---- lineMgt
----
--
---- Management for line. This includes management for
---- serial line (RS232 port) and Telnet.
--
--consoleMgt OBJECT IDENTIFIER ::= { lineMgt 1 }
--telnetMgt OBJECT IDENTIFIER ::= { lineMgt 2 }
--
--
----consoleMgt
--
--consoleDataBits OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- databits7(1),
-- databits8(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Number of data bits."
-- ::= { consoleMgt 1 }
--
--consoleParity OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- partyNone(1),
-- partyEven(2),
-- partyOdd(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Defines the generation of a parity bit."
-- ::= { consoleMgt 2 }
--
--consoleStopBits OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- stopbits1(1),
-- stopbits2(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The console stop bits, valid values are stopbits1(1) or stopbits2(2)"
-- ::= { consoleMgt 4 }
--
--consoleExecTimeout OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "In a serial console, use the consoleExecTimeout
-- variable to set the interval that the EXEC command
-- interpreter waits until user input is detected;
-- set the value to 0 to disable it."
-- ::= { consoleMgt 5 }
--
--consolePasswordThreshold OBJECT-TYPE
-- SYNTAX Integer32 (0..120)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The number of failed console logon attempts that may be
-- made before the system will not accept a further attempt
-- in the time specified by consoleSilentTime. A value of 0
-- disables the functionality."
-- ::= { consoleMgt 6 }
--
--consoleSilentTime OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The length of time that the management console is
-- inaccessible after the number of failed logon
-- attempts has reached consolePasswordThreshold. A value
-- of 0 disables the functionality."
--
-- ::= { consoleMgt 7 }
--
--consoleAdminBaudRate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Baud rate. Valid values are 2400, 4800, 9600,
-- 19200, 38400, 57600, 115200.
--
-- Setting this variable to 0 means autobaud.
-- Please read the actual baud rate in the consoleOperBaudRate variable."
-- ::= { consoleMgt 8 }
--
--consoleOperBaudRate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The baud rate currently in use."
-- ::= { consoleMgt 9 }
--
----to set login timeout seconds
--consoleLoginResponseTimeout OBJECT-TYPE
-- SYNTAX Integer32(0..300)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Console login response timeout setting.
-- Valid range is 0 to 300. Setting to 0 means disabled."
-- ::= { consoleMgt 10 }
--
---- telnetMgt
--
--telnetExecTimeout OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "In a telnet session, to set the interval that the EXEC command interpreter
-- waits until user input is detected, use the telnetExecTimeout
-- variables. "
-- ::= { telnetMgt 1 }
--
--telnetPasswordThreshold OBJECT-TYPE
-- SYNTAX INTEGER (0..120)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "In a telnet session, use the consolePasswordThreshold variabes to
-- set the password intrusion threshold, which limits the number of
-- failed logon attempts allowed. Set it value to 0 to disable it."
-- ::= { telnetMgt 2 }
--
----to set login timeout seconds
--telnetLoginResponseTimeout OBJECT-TYPE
-- SYNTAX Integer32(1..300)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Telnet login response timeout setting.
-- Valid range is 1 to 300.
-- This timout setting cannot be disbled."
-- ::= { telnetMgt 3 }
--
-- sysTimeMgt
--
sntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 1 }
sntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP."
::= { sntpMgt 1 }
sntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Service mode."
::= { sntpMgt 2 }
sntpPollInterval OBJECT-TYPE
SYNTAX Integer32(16..16384)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Polling interval."
::= { sntpMgt 3 }
sntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for SNTP servers"
::= { sntpMgt 4 }
sntpServerEntry OBJECT-TYPE
SYNTAX SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for SNTP servers."
INDEX { sntpServerIndex }
::= { sntpServerTable 1 }
SntpServerEntry ::= SEQUENCE
{
sntpServerIndex Integer32,
sntpServerIpAddress IpAddress
}
sntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a server. This table has fixed size."
::= { sntpServerEntry 1 }
sntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0."
::= { sntpServerEntry 2 }
sysCurrentTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' is the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by the space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is the
four-digit year. An example is: 'Jan 1 02:03:04 2002'."
::= { sysTimeMgt 2 }
sysTimeZone OBJECT-TYPE
SYNTAX DisplayString(SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "It is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero."
::= { sysTimeMgt 3 }
--sysTimeZoneName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..30))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The name of the time zone."
-- ::= { sysTimeMgt 4 }
ntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 5}
ntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP, set disabled(2) to disable
the NTP."
::= { ntpMgt 1 }
ntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Service mode."
::= { ntpMgt 2 }
ntpPollInterval OBJECT-TYPE
SYNTAX Integer32(16..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Polling interval."
::= { ntpMgt 3 }
ntpAuthenticateStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP Authenticate, set disabled(2) to
disable the NTP."
::= { ntpMgt 4 }
ntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP servers"
::= { ntpMgt 5 }
ntpServerEntry OBJECT-TYPE
SYNTAX NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP servers."
INDEX { ntpServerIpAddress }
::= { ntpServerTable 1 }
NtpServerEntry ::= SEQUENCE
{
ntpServerIpAddress IpAddress,
ntpServerVersion Integer32,
ntpServerKeyId Integer32,
ntpServerStatus INTEGER
}
ntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0."
::= { ntpServerEntry 1 }
ntpServerVersion OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "NTP version."
::= { ntpServerEntry 2 }
ntpServerKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for a NTP server. This variable can only be written.
"
::= { ntpServerEntry 3 }
ntpServerStatus OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
active(2),
destroy(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'create', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row."
::= { ntpServerEntry 4 }
ntpAuthKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP Authentication keys"
::= { ntpMgt 6 }
ntpAuthKeyEntry OBJECT-TYPE
SYNTAX NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP Authentication keys."
INDEX { ntpAuthKeyId }
::= { ntpAuthKeyTable 1 }
NtpAuthKeyEntry::= SEQUENCE
{
ntpAuthKeyId Integer32,
ntpAuthKeyWord OCTET STRING,
ntpAuthKeyStatus INTEGER
}
ntpAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a Authentication key. This table has fixed size."
::= { ntpAuthKeyEntry 1 }
ntpAuthKeyWord OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Authentication key word is used to created a key by the MD5
And the max length is 32."
::= { ntpAuthKeyEntry 2 }
ntpAuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
active(2),
destroy(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'create', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row."
::= { ntpAuthKeyEntry 3 }
--
-- fileMgt
--
-- Management for File System Manipulate, including files copy, display and delete.
fileCopyMgt OBJECT IDENTIFIER ::= { fileMgt 1 }
--
-- This performs the copy operation.
--
fileCopySrcOperType OBJECT-TYPE
SYNTAX INTEGER
{
switchDevice(1),
tftp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Copy Operation that we want to perform on the
fileCopyDestOperType.
switchDevice(1) means we want save configuration to TFTP server, tftp(2) means
we want to load firmware or configuration from TFTP server.
Note: The value of fileCopySrcOperType and fileCopyDestOperType should not equal."
::= { fileCopyMgt 1}
fileCopySrcFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source file name for fileCopyMgt when a copy
operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopySrcOperType is switchDevice(1),
this variable can be ignored."
::= { fileCopyMgt 2 }
fileCopyDestOperType OBJECT-TYPE
SYNTAX INTEGER
{
switchDevice(1),
tftp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Copy Operation that we want to perform on
fileCopySrcOperType.
switchDevice(1) means we want load firmware or configuration from TFTP server, tftp(2) means
we want to save configuration to TFTP server.
Note: The value of fileCopySrcOperType and fileCopyDestOperType should not equal."
::= { fileCopyMgt 3 }
fileCopyDestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file name for fileCopyMgt when a
copy operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopyDestOperType is switchDevice(1),
this variable can be ignored."
::= { fileCopyMgt 4 }
fileCopyFileType OBJECT-TYPE
SYNTAX INTEGER {
opcode(1),
config(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to copy in fileCopyMgt."
::= { fileCopyMgt 5 }
fileCopyTftpServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the TFTP server for transfer
when a download is next requested via this MIB.
This value is set to '0.0.0.0' when no IP address has been
specified."
-- If neither fileCopySrcOperType nor fileCopyDestOperType
-- is tftp(4), this variable can be ignored."
::= { fileCopyMgt 6 }
--fileCopyUnitId OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the switch unit for stackable devices.
-- When performing the 'copy unit file' or 'copy file unit' action,
-- if neither fileCopySrcOperType nor fileCopyDestOperType
-- is unit(5), this variable can be ignored."
-- ::= { fileCopyMgt 7 }
fileCopyAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copy(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to copy(2) to begin the copy Operation.
In ES4528V product, if copy opcode action is successful, the system
will reboot immediately. In others condittion, we can get the current
status whatever successful or error message from OID fileCopyTftpErrMsg."
::= { fileCopyMgt 8 }
--fileCopyStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- fileCopyTftpUndefError(1),
-- fileCopyTftpFileNotFound(2),
-- fileCopyTftpAccessViolation(3),
-- fileCopyTftpDiskFull(4),
-- fileCopyTftpIllegalOperation(5),
-- fileCopyTftpUnkownTransferId(6),
-- fileCopyTftpFileExisted(7),
-- fileCopyTftpNoSuchUser(8),
-- fileCopyTftpTimeout(9),
-- fileCopyTftpSendError(10),
-- fileCopyTftpReceiverError(11),
-- fileCopyTftpSocketOpenError(12),
-- fileCopyTftpSocketBindError(13),
-- fileCopyTftpUserCancel(14),
-- fileCopyTftpCompleted(15),
-- fileCopyParaError(16),
-- fileCopyBusy(17),
-- fileCopyUnknown(18),
-- fileCopyReadFileError(19),
-- fileCopySetStartupError(20),
-- fileCopyFileSizeExceed(21),
-- fileCopyMagicWordError(22),
-- fileCopyImageTypeError(23),
-- fileCopyHeaderChecksumError(24),
-- fileCopyImageChecksumError(25),
-- fileCopyWriteFlashFinish(26),
-- fileCopyWriteFlashError(27),
-- fileCopyWriteFlashProgramming(28),
-- fileCopyError(29),
-- fileCopySuccess(30),
-- fileCopyCompleted(31)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The status of the last copy procedure, if any. This
-- object will have a value of downloadStatusUnknown(2) if no
-- copy operation has been performed."
-- ::= { fileCopyMgt 9 }
fileCopyTftpErrMsg OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TFTP error message"
::= { fileCopyMgt 10 }
--fileInfoMgt OBJECT IDENTIFIER ::= { fileMgt 2 }
-- This mangement performs the display and delete operation.
--fileInfoTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF FileInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table contain the information of the file system;
-- we can also perform the delete, set startup file operation."
--
-- ::= { fileInfoMgt 1 }
--
--fileInfoEntry OBJECT-TYPE
-- SYNTAX FileInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptually row for fileInfoTable."
-- INDEX {fileInfoUnitID, IMPLIED fileInfoFileName}
-- ::= { fileInfoTable 1 }
--
--FileInfoEntry ::= SEQUENCE
-- {
-- fileInfoUnitID Integer32,
-- fileInfoFileName DisplayString,
-- fileInfoFileType INTEGER,
-- fileInfoIsStartUp TruthValue,
-- fileInfoFileSize Integer32,
-- fileInfoCreationTime DisplayString,
-- fileInfoDelete INTEGER
-- }
--
--fileInfoUnitID OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The switch unit in a stacking system, in a
-- non-stacking system, this value is always 1."
-- ::= { fileInfoEntry 1 }
--
--fileInfoFileName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (1..32))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The file Name of the file System in the device."
-- ::= { fileInfoEntry 2 }
--
--fileInfoFileType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- diag(1),
-- runtime(2),
-- syslog(3),
-- cmdlog(4),
-- config(5),
-- postlog(6),
-- private(7),
-- certificate(8),
-- webarchive(9)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The file type of the file System in the device."
-- ::= { fileInfoEntry 3 }
--
--fileInfoIsStartUp OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This flag indicate whether this file is a startup file. Set this
-- object to true(1) to indicate that this is a startup file. Setting this
-- object to false(2) is a invalid operation."
-- ::= { fileInfoEntry 4 }
--
--fileInfoFileSize OBJECT-TYPE
-- SYNTAX Integer32
-- UNITS "bytes"
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The sizes (in bytes) of the file."
-- ::= { fileInfoEntry 5 }
--
--fileInfoCreationTime OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(20))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The creation time of the file, This is a text string in the
-- following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
-- are the first three letters of the English name of the month.
-- '_d' is the day of month. A single-digit day is preceded by
-- a space. 'hh:mm:ss' is a 24-hour representations of hours,
-- minutes, and seconds. A single-digit hour is preceded by a
-- zero. 'yyyy' is the four-digit year. An example is:
-- 'Jan 1 02:03:04 2002'."
-- ::= { fileInfoEntry 6 }
--
--fileInfoDelete OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noDelete(1),
-- delete(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Write this object to delete(2) to delete a file, when
-- read, this always return noDelete(1)."
-- ::= { fileInfoEntry 7 }
--
--dnsMgt
--
--dnsHostTable
--dnsDomainLookup OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "To enable the IP Domain Naming System (DNS)-based host name-to-address translation."
-- ::= { dnsMgt 1 }
--
--dnsDomainName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..255))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "To define a default domain name to complete
-- unqualified host names (names without a dotted-decimal domain name)."
-- ::= { dnsMgt 2 }
--
--dnsHostTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DnsHostEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table is used to define static host name-to-address mapping."
-- ::= { dnsMgt 3 }
--
--dnsHostEntry OBJECT-TYPE
-- SYNTAX DnsHostEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row for the dnsHostTable."
-- INDEX { dnsHostName, dnsHostIndex }
-- ::= { dnsHostTable 1 }
--
--DnsHostEntry ::= SEQUENCE
-- {
-- dnsHostName DisplayString,
-- dnsHostIndex Integer32,
-- dnsHostIp IpAddress
-- }
--
--dnsHostName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(1..255))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The DNS Host name."
-- ::= { dnsHostEntry 1 }
--
--dnsHostIndex OBJECT-TYPE
-- SYNTAX Integer32(1..8)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The secondary index of this dnsHostTable, representing the
-- sequence of the dnsHostIp."
-- ::= { dnsHostEntry 2 }
--
--dnsHostIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The DNS Host IP."
-- ::= { dnsHostEntry 3 }
--
----dnsAliasTable
--dnsAliasTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DnsAliasEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table displays the alias of the host name."
-- ::= { dnsMgt 4 }
--
--dnsAliasEntry OBJECT-TYPE
-- SYNTAX DnsAliasEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row for the dnsAliasTable."
-- INDEX { dnsAliasName, dnsAliasAlias }
-- ::= { dnsAliasTable 1 }
--
--DnsAliasEntry ::= SEQUENCE
-- {
-- dnsAliasName DisplayString,
-- dnsAliasAlias DisplayString
-- }
--
--dnsAliasName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(1..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Host name."
-- ::= { dnsAliasEntry 1 }
--
--dnsAliasAlias OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(1..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Alias."
-- ::= { dnsAliasEntry 2 }
--
----dnsDomainListEntry
--dnsDomainListTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DnsDomainListEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This table defines a list of default domain names to complete unqualified host names."
-- ::= { dnsMgt 5 }
--
--dnsDomainListEntry OBJECT-TYPE
-- SYNTAX DnsDomainListEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row for the dnsDomainListTable."
-- INDEX { dnsDomainListName }
-- ::= { dnsDomainListTable 1 }
--
--DnsDomainListEntry ::= SEQUENCE
-- {
-- dnsDomainListName DisplayString,
-- dnsDomainListStatus ValidStatus
-- }
--
--dnsDomainListName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(1..255))
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Domain name."
-- ::= { dnsDomainListEntry 1 }
--
--dnsDomainListStatus OBJECT-TYPE
-- SYNTAX ValidStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry.
-- Setting this to invalid(2) destroys an entry."
-- ::= { dnsDomainListEntry 2 }
--
----dnsNameServerEntry
--dnsNameServerTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DnsNameServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "To specify the address of one or more
-- name servers to use for name and address resolution.
-- This table has fixed size, will get 0.0.0.0 dnsNameServerIp
-- if this entry is not existed."
-- ::= { dnsMgt 6 }
--
--dnsNameServerEntry OBJECT-TYPE
-- SYNTAX DnsNameServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row for dnsNameServerTable."
-- INDEX { dnsNameServerIndex }
-- ::= { dnsNameServerTable 1 }
--
--DnsNameServerEntry ::= SEQUENCE
--{
-- dnsNameServerIndex Integer32,
-- dnsNameServerIp IpAddress
--}
--
--dnsNameServerIndex OBJECT-TYPE
-- SYNTAX Integer32(1..6)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Index of this dnsNameServerTable,
-- representing the sequence of the dnsNameServerIp."
-- ::= { dnsNameServerEntry 1 }
--
--
--dnsNameServerIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "IP address of name server."
-- ::= { dnsNameServerEntry 2 }
--
----dnsCacheEntry
--dnsCacheTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DnsCacheEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "To display the RRs in DNS cache."
-- ::= { dnsMgt 7 }
--
--dnsCacheEntry OBJECT-TYPE
-- SYNTAX DnsCacheEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A conceptual row for the dnsCacheTable."
-- INDEX { dnsCacheIndex }
-- ::= { dnsCacheTable 1 }
--
--DnsCacheEntry ::= SEQUENCE
-- {
-- dnsCacheIndex Integer32,
-- dnsCacheFlag Integer32,
-- dnsCacheType INTEGER,
-- dnsCacheIp IpAddress,
-- dnsCacheTtl Integer32,
-- dnsCacheDomain DisplayString
-- }
--
--dnsCacheIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry sequence number."
-- ::= { dnsCacheEntry 1 }
--
--dnsCacheFlag OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Always get 4, means this record is unreliable."
-- ::= { dnsCacheEntry 2 }
--
--dnsCacheType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- address(1),
-- cname(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Cache Type: address(1); cname(2)."
-- ::= { dnsCacheEntry 3 }
--
--dnsCacheIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DNS cache IP."
-- ::= { dnsCacheEntry 4 }
--
--dnsCacheTtl OBJECT-TYPE
-- SYNTAX Integer32(0..876000)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DNS cache TTL."
-- ::= { dnsCacheEntry 5 }
--
--dnsCacheDomain OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(1..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The DNS cache domain."
-- ::= { dnsCacheEntry 6 }
--
----
----mvrMgt
----
--
--mvrStatus OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
-- Registration) on the device. NOTE: IGMP Snooping
-- must be enabled first before enabling MVR and MVR
-- will be disabled when IGMP Snooping is disabled."
-- ::= { mvrMgt 1 }
--
--mvrVlanId OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "To set VLAN for MVR.The VLAN identified by a particular
-- value of this index is the same VLAN as identified by the
-- same value of dot1qVlanIndex in the Q-BRIDGE-MIB."
-- ::= { mvrMgt 2 }
--
--mvrMaxGroups OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The maximum number of MVR groups."
-- ::= { mvrMgt 3 }
--
--mvrCurrentGroups OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The current number of MVR groups."
-- ::= { mvrMgt 4}
--
--mvrGroupsCtl OBJECT IDENTIFIER ::= { mvrMgt 5 }
--
--mvrGroupsCtlId OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The start of a contiguous range of MVR group
-- addresses."
-- ::= { mvrGroupsCtl 1 }
--
--mvrGroupsCtlCount OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The range count for configuring MVR group addresses."
-- ::= { mvrGroupsCtl 2 }
--
--mvrGroupsCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noAction(0),
-- create(1),
-- destory(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Sets the configure action for a contiguous range of MVR group
-- addresses. The start addresses is the current value of
-- mvrGroupsCtlId and the range count is the current value of
-- mvrGroupsCtlCount. Set this object to create(2) to
-- create MVR group addresses. Set this object
-- to destory(3) to delete MVR group addresses. When
-- the action is complete, this object becomes noAction(1)."
-- ::= { mvrGroupsCtl 3 }
--
--mvrGroupTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MvrGroupEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for configuring the MVR group."
-- ::= { mvrMgt 6 }
--
--mvrGroupEntry OBJECT-TYPE
-- SYNTAX MvrGroupEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry for configuring the MVR group."
-- INDEX {mvrGroupId}
-- ::= { mvrGroupTable 1 }
--
--MvrGroupEntry ::= SEQUENCE
--{
-- mvrGroupId IpAddress,
-- mvrGroutActive INTEGER,
-- mvrGroupStatus INTEGER
--}
--
--mvrGroupId OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The multicast address of the MVR group."
-- ::= { mvrGroupEntry 1 }
--
--mvrGroutActive OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- active(1),
-- inactive(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "To indicate if the group has a member or not. If there are no
-- members, the status is inactive(2); otherwise the status
-- is active(1)."
-- ::= { mvrGroupEntry 2 }
--
--mvrGroupStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- valid(1),
-- invalid(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry. Setting this
-- to invalid(2) destroys an entry."
-- ::= { mvrGroupEntry 3 }
--
--mvrGroupStaticTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MvrGroupStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for configuring the static members of the
-- MVR group."
-- ::= { mvrMgt 7 }
--
--mvrGroupStaticEntry OBJECT-TYPE
-- SYNTAX MvrGroupStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry for configuring the static members of the
-- MVR group."
-- INDEX {mvrGroupStaticAddress}
-- ::= { mvrGroupStaticTable 1 }
--
--MvrGroupStaticEntry ::= SEQUENCE
--{
-- mvrGroupStaticAddress IpAddress,
-- mvrGroupStaticPorts PortList,
-- mvrGroupStaticStatus INTEGER
--
--}
--
--mvrGroupStaticAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The multicast address of the MVR group."
-- ::= { mvrGroupStaticEntry 1 }
--
--mvrGroupStaticPorts OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "The set of ports configured by management in this entry.
-- Ports entered in this list will be the static members
-- of this MVR group."
-- ::= { mvrGroupStaticEntry 2 }
--
--mvrGroupStaticStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- valid(1),
-- invalid(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Setting this to valid(1) creates an entry. Setting this
-- to invalid(2) destroys an entry."
-- ::= { mvrGroupStaticEntry 3 }
--
--mvrGroupCurrentTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MvrGroupCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for the current members of the MVR group."
-- ::= { mvrMgt 8 }
--
--mvrGroupCurrentEntry OBJECT-TYPE
-- SYNTAX MvrGroupCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry for the current members of the MVR group."
-- INDEX {mvrGroupCurrentAddress}
-- ::= { mvrGroupCurrentTable 1 }
--
--MvrGroupCurrentEntry ::= SEQUENCE
--{
-- mvrGroupCurrentAddress IpAddress,
-- mvrGroupCurrentPorts PortList
--}
--
--mvrGroupCurrentAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The multicast address of the MVR group."
-- ::= { mvrGroupCurrentEntry 1 }
--
--mvrGroupCurrentPorts OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The complete set of ports currently associated with this
-- MVR group."
-- ::= { mvrGroupCurrentEntry 2 }
--
--mvrPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MvrPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table for configuring the MVR port."
-- ::= { mvrMgt 9 }
--
--mvrPortEntry OBJECT-TYPE
-- SYNTAX MvrPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The entry for configuring the MVR port."
-- INDEX {mvrIfIndex}
-- ::= { mvrPortTable 1 }
--
--MvrPortEntry ::= SEQUENCE
--{
-- mvrIfIndex InterfaceIndex,
-- mvrPortType INTEGER,
-- mvrPortImmediateLeave EnabledStatus,
-- mvrPortActive INTEGER
--
--}
--
--mvrIfIndex OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The port interface of the portTable. The interface
-- identified by a particular value of this index is the
-- same interface as identified by the same value of ifIndex
-- in the IF-MIB."
-- ::= { mvrPortEntry 1 }
--
--mvrPortType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- none(0),
-- source(1),
-- receiver(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "For configuring the MVR port type. To disable the MVR
-- port type, use the none(0)."
-- ::= { mvrPortEntry 2 }
--
--mvrPortImmediateLeave OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "To enable immediate leave on MVR port."
-- ::= { mvrPortEntry 3 }
--
--mvrPortActive OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- active(1),
-- inactive(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "To indicate if the port is associated with the MVR group.
-- If the port is the MVR receiver port or the MVR source
-- port in MVR vlan, the status is active(1); otherwise
-- the status is inactive(2)."
-- ::= { mvrPortEntry 4 }
--
--mvrRunningStatus OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Describes the running status of MVR (Multicast VLAN Registration)
-- to the switch. A value of true(1) indicates that all necessary
-- conditions in the MVR environment are satisfied. A value of false(2)
-- indicates that some necessary conditions in the MVR environment are
-- not satisfied."
-- ::= { mvrMgt 10 }
--
--
----
---- dhcpSnoopMgt
----
--
---- Management of DHCP snooping and IP souce guard.
--
--dhcpSnoopGlobal OBJECT IDENTIFIER ::= { dhcpSnoopMgt 1 }
--dhcpSnoopVlan OBJECT IDENTIFIER ::= { dhcpSnoopMgt 2 }
--dhcpSnoopInterface OBJECT IDENTIFIER ::= { dhcpSnoopMgt 3 }
--dhcpSnoopBindings OBJECT IDENTIFIER ::= { dhcpSnoopMgt 4 }
--dhcpSnoopStatistics OBJECT IDENTIFIER ::= { dhcpSnoopMgt 5 }
--
--dhcpSnoopEnable OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates whether the DHCP Snooping feature is
-- enabled."
-- ::= { dhcpSnoopGlobal 1 }
--
--dhcpSnoopVerifyMacAddressEnable OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates whether DHCP Snooping Mac address
-- verification is enabled."
-- ::= { dhcpSnoopGlobal 2 }
--
--dhcpSnoopInformationOptionEnable OBJECT-TYPE
--
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates whether the DHCP snooping information option(option 82) feature is
-- enabled."
-- ::= { dhcpSnoopGlobal 3 }
--
--dhcpSnoopInformationOptionPolicy OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- drop(1),
-- keep(2),
-- replace(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates which reforwarding policy shall be used for DHCP
-- snooping information option(option 82). A value of drop(1) means to drop
-- the DHCP request packet which has the information option(option 82).
-- A value of keep(2) means to keep the existing information option(option 82)
-- of the DHCP request packet. A value of replace(3), which is the default value,
-- means to replace the existing information option(option 82) of the DHCP
-- request packet."
-- ::= { dhcpSnoopGlobal 4 }
--
----
--dhcpSnoopVlanConfigTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DhcpSnoopVlanConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A table contains DHCP Snooping configurations of existing VLANs."
-- ::= { dhcpSnoopVlan 1 }
--
--dhcpSnoopVlanConfigEntry OBJECT-TYPE
-- SYNTAX DhcpSnoopVlanConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An instance contains the configuration to enable
-- or disable DHCP Snooping at each existing VLAN."
-- INDEX { dhcpSnoopVlanIndex }
-- ::= { dhcpSnoopVlanConfigTable 1 }
--
--DhcpSnoopVlanConfigEntry ::= SEQUENCE
--{
-- dhcpSnoopVlanIndex VlanIndex,
-- dhcpSnoopVlanEnable EnabledStatus
--}
--
--dhcpSnoopVlanIndex OBJECT-TYPE
-- SYNTAX VlanIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object indicates the VLAN ID on which DHCP Snooping
-- feature is configured."
-- ::= { dhcpSnoopVlanConfigEntry 1 }
--
--dhcpSnoopVlanEnable OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates whether DHCP Snooping is enabled in
-- this VLAN."
-- ::= { dhcpSnoopVlanConfigEntry 2 }
--
----
--dhcpSnoopPortConfigTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DhcpSnoopPortConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A table provides the mechanism to configure the trust
-- state of each port or trunk for DHCP Snooping purpose."
-- ::= { dhcpSnoopInterface 1 }
--
--dhcpSnoopPortConfigEntry OBJECT-TYPE
-- SYNTAX DhcpSnoopPortConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An instance contains the configuration to enable or disable
-- trust state of each port or trunk for DHCP Snooping purpose."
-- INDEX { dhcpSnoopPortIfIndex }
-- ::= { dhcpSnoopPortConfigTable 1 }
--
--DhcpSnoopPortConfigEntry ::= SEQUENCE
--{
-- dhcpSnoopPortIfIndex InterfaceIndex,
-- dhcpSnoopPortTrustEnable EnabledStatus
--}
--
--dhcpSnoopPortIfIndex OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The ifIndex value of the port or trunk."
-- ::= { dhcpSnoopPortConfigEntry 1 }
--
--dhcpSnoopPortTrustEnable OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates whether the port or trunk is trusted
-- for DHCP Snooping purpose."
-- ::= { dhcpSnoopPortConfigEntry 2 }
----
--dhcpSnoopBindingsTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DhcpSnoopBindingsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A table contains the DHCP bindings information learnt by
-- the device."
-- ::= { dhcpSnoopBindings 1 }
--
--dhcpSnoopBindingsEntry OBJECT-TYPE
-- SYNTAX DhcpSnoopBindingsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An instance contains the Mac address, IP address type,
-- IP address, VLAN number, interface number, leased time and
-- status."
-- INDEX { dhcpSnoopBindingsVlanIndex, dhcpSnoopBindingsMacAddress }
-- ::= { dhcpSnoopBindingsTable 1 }
--
--DhcpSnoopBindingsEntry ::= SEQUENCE
--{
-- dhcpSnoopBindingsVlanIndex VlanIndex,
-- dhcpSnoopBindingsMacAddress MacAddress,
-- dhcpSnoopBindingsAddrType InetAddressType,
-- dhcpSnoopBindingsEntryType INTEGER,
-- dhcpSnoopBindingsIpAddress IpAddress,
-- dhcpSnoopBindingsPortIfIndex InterfaceIndex,
-- dhcpSnoopBindingsLeaseTime Unsigned32
--}
--
--dhcpSnoopBindingsVlanIndex OBJECT-TYPE
-- SYNTAX VlanIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object indicates the VLAN which a DHCP client host
-- belongs to."
-- ::= { dhcpSnoopBindingsEntry 1 }
--
--dhcpSnoopBindingsMacAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object indicates the MAC address of a DHCP client
-- host."
-- ::= { dhcpSnoopBindingsEntry 2 }
--
--dhcpSnoopBindingsAddrType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates the type of IP address denoted in
-- dhcpSnoopBindingsIpAddress type."
-- ::= { dhcpSnoopBindingsEntry 3 }
--
--dhcpSnoopBindingsEntryType OBJECT-TYPE
-- SYNTAX INTEGER { dynamic(1), static(2) }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates that this binding is obtained from
-- dynamically learning or is a static configuraion."
-- ::= { dhcpSnoopBindingsEntry 4 }
--
--dhcpSnoopBindingsIpAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates the allocated IP address of
-- a DHCP client host."
-- ::= { dhcpSnoopBindingsEntry 5 }
--
--dhcpSnoopBindingsPortIfIndex OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates the port or trunk where a DHCP client
-- host connects to."
-- ::= { dhcpSnoopBindingsEntry 6 }
--
--dhcpSnoopBindingsLeaseTime OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates the leased time of this DHCP
-- bindings."
-- ::= { dhcpSnoopBindingsEntry 7 }
--
----
--
--dhcpSnoopTotalForwardedPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Indicates the total number of packets subjected to
-- DHCP Snooping is forwarded."
-- ::= { dhcpSnoopStatistics 1 }
--
--dhcpSnoopUntrustedPortDroppedPkts OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Indicates the number of packets subjected to DHCP Snooping
-- is dropped because they come from untrusted interface."
-- ::= { dhcpSnoopStatistics 3 }
--
--
----
---- clusterMgt
----
--
--clusterEnable OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enables or disables clustering on the device."
-- ::= { clusterMgt 1 }
--
--clusterCommanderEnable OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enables or disables the device as commander in a cluster."
-- ::= { clusterMgt 2 }
--
--clusterIpPool OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The start internal IP address of a cluster pool."
-- ::= { clusterMgt 4 }
--
--clusterClearCandidateTable OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noClear(1),
-- clear(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Setting this object to clear(2) starts to clear the candidate table."
-- ::= { clusterMgt 5 }
--
--clusterRole OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- commander(1),
-- candidate(2),
-- activeMember(3),
-- disabled(5)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The current role of the device in a cluster.
-- commander(1) : The switch is the controlling device in a
-- cluster.
-- candidate(2) : The switch has been discovered by the commander,
-- but it has not been manually configured
-- for access from the commander.
-- activeMember(3): The switch has been manually configured for access
-- from the commander and it is active
-- in the cluster.
-- disabled(5) : The switch has clustering disabled."
-- ::= { clusterMgt 6 }
--
--clusterMemberCount OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The total number of members in a cluster."
-- ::= { clusterMgt 7 }
--
--clusterCandidateCount OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The total number of candidates in a cluster."
-- ::= { clusterMgt 8 }
--
--clusterCandidateTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF ClusterCandidateEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table listing cluster candidates."
-- ::= { clusterMgt 9 }
--
--clusterCandidateEntry OBJECT-TYPE
-- SYNTAX ClusterCandidateEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A conceptual row containing the information of the candidate."
-- INDEX { clusterCandidateMacAddr}
-- ::= { clusterCandidateTable 1 }
--
--ClusterCandidateEntry ::=
-- SEQUENCE {
-- clusterCandidateMacAddr MacAddress,
-- clusterCandidateDesc DisplayString,
-- clusterCandidateRole INTEGER
-- }
--
--clusterCandidateMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The MAC address of the candidate."
-- ::= {clusterCandidateEntry 1 }
--
--clusterCandidateDesc OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..42))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The description of the candidate."
-- ::= {clusterCandidateEntry 3 }
--
--clusterCandidateRole OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- candidate(2),
-- activeMember(3),
-- inactiveMember(4)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The role of the candidate.
-- candidate(2) : The switch is discovered by the commander,
-- but it has not been manually configured for
-- access from the commander.
-- activeMember(3) : The switch is manually configured for access
-- from the commander and it is active in the
-- cluster.
-- inactiveMember(4): The switch is manually configured for access
-- from the commander, but it is inactive in
-- the cluster."
-- ::= {clusterCandidateEntry 4 }
--
--clusterMemberTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF ClusterMemberEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table listing clustering members."
-- ::= { clusterMgt 10 }
--
--clusterMemberEntry OBJECT-TYPE
-- SYNTAX ClusterMemberEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A conceptual row containing the information of the member."
-- INDEX { clusterMemberId}
-- ::= { clusterMemberTable 1 }
--
--ClusterMemberEntry ::=
-- SEQUENCE {
-- clusterMemberId Unsigned32,
-- clusterMemberMacAddr MacAddress,
-- clusterMemberDesc DisplayString,
-- clusterMemberActive INTEGER
-- }
--
--clusterMemberId OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The ID of the member."
-- ::= {clusterMemberEntry 1 }
--
--clusterMemberMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The MAC address of the member."
-- ::= {clusterMemberEntry 2 }
--
--clusterMemberDesc OBJECT-TYPE
-- SYNTAX DisplayString(SIZE (0..42))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The description of the member."
-- ::= {clusterMemberEntry 3 }
--
--clusterMemberActive OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- activeMember(3),
-- inactiveMember(4)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The active status of the member.
-- activeMember(3) : The switch is manually configured for access
-- from the commander and it is active in the
-- cluster.
-- inactiveMember(4): The switch is manually configured for access
-- from the commander, but it is inactive in
-- the cluster."
-- ::= {clusterMemberEntry 4 }
--
--clusterMemberAddCtl OBJECT IDENTIFIER ::= { clusterMgt 11 }
--
--clusterMemberAddCtlMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The MAC address of the device associated with clusterMemberAddCtlAction."
-- ::= { clusterMemberAddCtl 1 }
--
--clusterMemberAddCtlId OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The member id associated with clusterMemberAddCtlAction."
-- ::= { clusterMemberAddCtl 2 }
--
--clusterMemberAddCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noAdd(1),
-- add(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Adds the device to members that can be accessed from the commander.
-- The MAC of the device is the current value of
-- clusterMemberAddCtlMacAddr and the assigned member ID is the current
-- value of clusterMemberAddCtlId. Set this object to add(2) to begin
-- adding the member."
-- ::= { clusterMemberAddCtl 5 }
--
--clusterMemberRemoveCtl OBJECT IDENTIFIER ::= { clusterMgt 12 }
--
--clusterMemberRemoveCtlId OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The member ID associated with clusterMemberRemoveCtlAction."
-- ::= { clusterMemberRemoveCtl 1 }
--
--clusterMemberRemoveCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noRemove(1),
-- remove(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Removes the device from members that can be accessed from the commander.
-- The member ID is the current value of clusterMemberRemoveCtlId.
-- Set this object to remove(2) to begin removing the member."
-- ::= { clusterMemberRemoveCtl 2 }
--
--
----
---- ipSrcGuardMgt
----
--
--ipSrcGuardConfigTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IpSrcGuardConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A table contains the configurations to enable or disable
-- IP Source Guard at each port or trunk."
-- ::= { ipSrcGuardMgt 1 }
--
--ipSrcGuardConfigEntry OBJECT-TYPE
-- SYNTAX IpSrcGuardConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An instance contains the configuration to enable
-- or disable IP Source Guard at each port or trunk."
-- INDEX { ipSrcGuardPortIfIndex }
-- ::= { ipSrcGuardConfigTable 1 }
--
--IpSrcGuardConfigEntry ::= SEQUENCE
--{
-- ipSrcGuardPortIfIndex InterfaceIndex,
-- ipSrcGuardMode INTEGER
--}
--
--ipSrcGuardPortIfIndex OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object idents the port or trunk which is capable of
-- IP Source Guard feature."
-- ::= { ipSrcGuardConfigEntry 1 }
--
--ipSrcGuardMode OBJECT-TYPE
-- SYNTAX INTEGER { diabled(0), srcIp(1), srcIpMac(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "This object indicates whether Ip Source Guard is enabled
-- at this interface. If the value equals 0, it means Ip Source
-- Guard is disabled. If the value equals 1, it means Ip Source
-- Guard is enabled, and packets are filtered by checking source ip.
-- If the value equals 2, it means Ip Source Guard is enabled
-- and packets are filtered by checking source ip and source mac."
-- ::= { ipSrcGuardConfigEntry 2 }
----
--ipSrcGuardAddrTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IpSrcGuardAddrEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "A table contains the IP Source Guard bindings information
-- learnt by the device."
-- ::= { ipSrcGuardMgt 2 }
--
--ipSrcGuardAddrEntry OBJECT-TYPE
-- SYNTAX IpSrcGuardAddrEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An instance contains the Mac address, IP address type,
-- IP address, VLAN number, interface number, leased time and
-- status."
-- INDEX { ipSrcGuardBindingsVlanIndex, ipSrcGuardBindingsMacAddress }
-- ::= { ipSrcGuardAddrTable 1 }
--
--IpSrcGuardAddrEntry ::= SEQUENCE
--{
-- ipSrcGuardBindingsVlanIndex VlanIndex,
-- ipSrcGuardBindingsMacAddress MacAddress,
-- ipSrcGuardBindingsAddrType InetAddressType,
-- ipSrcGuardBindingsEntryType INTEGER,
-- ipSrcGuardBindingsIpAddress IpAddress,
-- ipSrcGuardBindingsPortIfIndex InterfaceIndex,
-- ipSrcGuardBindingsLeaseTime Unsigned32,
-- ipSrcGuardBindingsStatus RowStatus
--}
--ipSrcGuardBindingsVlanIndex OBJECT-TYPE
-- SYNTAX VlanIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object indicates the VLAN which a DHCP client host
-- belongs to."
-- ::= { ipSrcGuardAddrEntry 1 }
--
--ipSrcGuardBindingsMacAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object indicates the MAC address of a DHCP client
-- host."
-- ::= { ipSrcGuardAddrEntry 2 }
--
--ipSrcGuardBindingsAddrType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object indicates the type of IP address denoted in
-- ipSrcGuardBindingsIpAddress type."
-- ::= { ipSrcGuardAddrEntry 3 }
--
--ipSrcGuardBindingsEntryType OBJECT-TYPE
-- SYNTAX INTEGER { dynamic(1), static(3) }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates that this binding is obtained from
-- dynamically learning or is a static configuraion."
-- ::= { ipSrcGuardAddrEntry 4 }
--
--ipSrcGuardBindingsIpAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object indicates the allocated IP address of
-- a DHCP client host."
-- ::= { ipSrcGuardAddrEntry 5 }
--
--ipSrcGuardBindingsPortIfIndex OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object indicates the port or trunk where a DHCP client
-- host connects to."
-- ::= { ipSrcGuardAddrEntry 6 }
--
--ipSrcGuardBindingsLeaseTime OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "This object indicates the leased time of this DHCP
-- bindings."
-- ::= { ipSrcGuardAddrEntry 7 }
--
--ipSrcGuardBindingsStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The status of this conceptual row entry. This object issued to
-- manage the creation and deletion of conceptual rows.
-- The status column has six defined values: - 'active', which
-- indicates that the conceptual row is available for use by the
-- managed device; - 'notInService', which indicates that the
-- conceptual row exists in the agent, but is unavailable for use
-- by the managed device."
-- ::= { ipSrcGuardAddrEntry 8 }
--
-- trap definitions
--
ES4528VTraps OBJECT IDENTIFIER ::= { ES4528VNotifications 1 }
ES4528VTrapsPrefix OBJECT IDENTIFIER ::= { ES4528VTraps 0 }
-- swPowerStatusChangeTrap NOTIFICATION-TYPE
-- OBJECTS { swIndivPowerUnitIndex, swIndivPowerIndex, swIndivPowerStatus }
-- STATUS current
-- DESCRIPTION "This trap is sent when the power status of
-- an individual power changes."
-- ::= { ES4528VTrapsPrefix 1 }
swPortSecurityTrap NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION "This trap is sent when the port is being intruded. This trap
will only be sent when the portSecActionTrap is enabled."
::= { ES4528VTrapsPrefix 36 }
swIpFilterRejectTrap NOTIFICATION-TYPE
OBJECTS { trapIpFilterRejectMode, trapIpFilterRejectIp }
STATUS current
DESCRIPTION "This trap is sent when an incorrect IP address is rejected by
the ipfilter."
::= { ES4528VTrapsPrefix 40 }
-- swSmtpConnFailureTrap NOTIFICATION-TYPE
-- OBJECTS { smtpServerIp }
-- STATUS current
-- DESCRIPTION "This trap is triggered if the SMTP system
-- cannot open a connection to the mail server successfully."
-- ::= { ES4528VTrapsPrefix 41 }
-- swMainBoardVerMismatchNotificaiton NOTIFICATION-TYPE
-- OBJECTS { swOpCodeVer, swOpCodeVer}
-- STATUS current
-- DESCRIPTION "This trap is sent when the slave version is mismatch with the
-- master version. This trap will binds two object, the first object
-- indicate the master version, whereas the second represent the
-- slave version."
-- ::= { ES4528VTrapsPrefix 56 }
--
--diffServMgt
--
--diffServMgt OBJECT IDENTIFIER ::= { qosMgt 4 }
--
--diffServPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for differentiated services on each port."
-- ::= { diffServMgt 9 }
--
--diffServPortEntry OBJECT-TYPE
-- SYNTAX DiffServPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for differentiated services on each port."
-- INDEX { diffServPortIfIndex }
-- ::= { diffServPortTable 1 }
--
--DiffServPortEntry ::= SEQUENCE
--{
-- diffServPortIfIndex Integer32,
-- diffServPortPolicyMapIndex Integer32,
-- diffServPortIngressIpAclIndex Integer32,
-- diffServPortIngressMacAclIndex Integer32
--}
--
--diffServPortIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "This object is the interface index of diffServPortEntry.
-- The interface identified by a particular value of this
-- index is the same interface as identified by the same
-- value of ifIndex in the IF-MIB."
-- ::= { diffServPortEntry 1 }
--
--diffServPortPolicyMapIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the policy map binding to the interface. The policy
-- map identified by a particular value of this index is
-- associated with the same DiffServPolicyMapEntry as identified
-- by the same value of diffServPolicyMapIndex."
-- ::= { diffServPortEntry 2 }
--
--diffServPortIngressIpAclIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the ingress IP ACL binding to the interface. The
-- ingress IP ACL identified by a particular value of this index
-- is associated with the same diffServAclEntry as identified by
-- the same value of diffServAclIndex."
-- ::= { diffServPortEntry 3 }
--
--diffServPortIngressMacAclIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Specifies the ingress MAC ACL binding to the interface. The
-- ingress MAC ACL identified by a particular value of this
-- index is associated with the same diffServAclEntry as
-- identified by the same value of diffServAclIndex."
-- ::= { diffServPortEntry 4 }
--
--diffServPolicyMapTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServPolicyMapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for policy map."
-- ::= { diffServMgt 10 }
--
--diffServPolicyMapEntry OBJECT-TYPE
-- SYNTAX DiffServPolicyMapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for policy map."
-- INDEX { diffServPolicyMapIndex }
-- ::= { diffServPolicyMapTable 1 }
--
--DiffServPolicyMapEntry ::= SEQUENCE
--{
-- diffServPolicyMapIndex Integer32,
-- diffServPolicyMapName DisplayString,
-- diffServPolicyMapDescription DisplayString,
-- diffServPolicyMapElementIndexList OCTET STRING,
-- diffServPolicyMapStatus RowStatus
--}
--
--diffServPolicyMapIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in this table."
-- ::= { diffServPolicyMapEntry 1 }
--
--diffServPolicyMapName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (1..16))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The name of this entry."
-- ::= { diffServPolicyMapEntry 2 }
--
--diffServPolicyMapDescription OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..64))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The description of this entry."
-- ::= { diffServPolicyMapEntry 3 }
--
--diffServPolicyMapElementIndexList OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The octet string containes the diffServPolicyMapElementEntry
-- indexes. Two octets express one index and it is represented
-- in network order. This index list indicates the
-- diffServPolicyMapEntrys which belong to this entry."
-- ::= { diffServPolicyMapEntry 4 }
--
--diffServPolicyMapStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row, or modify or delete
-- an existing row, in this table. The status column has six
-- defined values:
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active');it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServPolicyMapEntry 5 }
--
--diffServPolicyMapAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 11 }
--
--diffServPolicyMapAttachCtlIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Index for attachment control.
-- Specifies the policy map as the target to relate with
-- the policy map element. The policy map identified by
-- a particular value of this index is associated with
-- the same diffServPolicyMapEntry as identified by the
-- same value of diffServPolicyMapIndex."
-- ::= { diffServPolicyMapAttachCtl 1 }
--
--diffServPolicyMapAttachCtlElementIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Element Index for attachment control.Specifies the policy map
-- element to relate with the policy map. The policy map element
-- identified by a particular value of this index is associated
-- with the same diffServPolicyMapElementEntry as identified by
-- the same value of diffServPolicyMapElementIndex."
-- ::= { diffServPolicyMapAttachCtl 2 }
--
--diffServPolicyMapAttachCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noAction(1),
-- attach(2),
-- detach(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Action for attachment control. When setting this object to
-- attach(2) to begin the attaching operation, a particular
-- policy map element is attached to a particular policy map.
-- When setting this object to detach(3) to begin the not
-- attached operation, a particular policy map element is not
-- attached to a particular policy map. When the action is
-- finshed or no action is taken, the value of this object is
-- noAction(1). A particular policy map is specified in the
-- diffServPolicyMapAttachCtlIndex. A particularpolicy map
-- element is specified in the
-- diffServPolicyMapAttachCtlElementIndex."
-- ::= { diffServPolicyMapAttachCtl 3 }
--
--diffServPolicyMapElementTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServPolicyMapElementEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for policy map element."
-- ::= { diffServMgt 12 }
--
--diffServPolicyMapElementEntry OBJECT-TYPE
-- SYNTAX DiffServPolicyMapElementEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for policy map element."
-- INDEX { diffServPolicyMapElementIndex }
-- ::= { diffServPolicyMapElementTable 1 }
--
--DiffServPolicyMapElementEntry ::= SEQUENCE
--{
-- diffServPolicyMapElementIndex Integer32,
-- diffServPolicyMapElementClassMapIndex Integer32,
-- diffServPolicyMapElementMeterIndex Integer32,
-- diffServPolicyMapElementActionIndex Integer32,
-- diffServPolicyMapElementStatus RowStatus
--}
--
--diffServPolicyMapElementIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in this table."
-- ::= { diffServPolicyMapElementEntry 1 }
--
--diffServPolicyMapElementClassMapIndex OBJECT-TYPE
-- SYNTAX Integer32(1..65535)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the class map binding to this entry. The class map
-- identified by a particular value of this index is associated
-- with the same diffServClassMapEntry as identified by the same
-- value of diffServClassMapIndex."
-- ::= { diffServPolicyMapElementEntry 2 }
--
--diffServPolicyMapElementMeterIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the meter binding to this entry. The meter
-- identified by a particular value of this index is associated
-- with the same diffServMeterEntry as identified by the same
-- value of diffServMeterIndex. If this value is
-- zero, no associated meter will be associated, as zero is not a
-- valid meter index."
-- ::= { diffServPolicyMapElementEntry 3 }
--
--diffServPolicyMapElementActionIndex OBJECT-TYPE
-- SYNTAX Integer32(1..65535)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the action binding to this entry. The action
-- identified by a particular value of this index is associated
-- with the same diffServActionEntry as identified by the same
-- value of diffServActionIndex."
-- ::= { diffServPolicyMapElementEntry 4 }
--
--diffServPolicyMapElementStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row, or modify or delete
-- an existing row, in this table. The status column has six
-- defined values:
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active'); it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServPolicyMapElementEntry 5 }
--
--diffServClassMapTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServClassMapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for class map."
-- ::= { diffServMgt 13 }
--
--diffServClassMapEntry OBJECT-TYPE
-- SYNTAX DiffServClassMapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for class map."
-- INDEX { diffServClassMapIndex }
-- ::= { diffServClassMapTable 1 }
--
--DiffServClassMapEntry ::= SEQUENCE
--{
-- diffServClassMapIndex Integer32,
-- diffServClassMapName DisplayString,
-- diffServClassMapDescription DisplayString,
-- diffServClassMapMatchType INTEGER,
-- diffServClassMapElementIndexTypeList OCTET STRING,
-- diffServClassMapElementIndexList OCTET STRING,
-- diffServClassMapStatus RowStatus
--}
--
--diffServClassMapIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in this table."
-- ::= { diffServClassMapEntry 1 }
--
--diffServClassMapName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (1..16))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The name of this entry."
-- ::= { diffServClassMapEntry 2 }
--
--diffServClassMapDescription OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..64))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The description of this entry."
-- ::= { diffServClassMapEntry 3 }
--
--diffServClassMapMatchType OBJECT-TYPE
-- SYNTAX INTEGER {
-- matchAny(1),
-- matchAll(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The map match type of this entry."
-- ::= { diffServClassMapEntry 4 }
--
--diffServClassMapElementIndexTypeList OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The octet string containes the type of class map element
-- indexes. Two octets which are represented in network order
-- express one type of the class map element index in network
-- order and it maps the index of
-- differServClasssMapElementIndexList in order. When the type is
-- macAce(1), the maping index of
-- differServClasssMapElementIndexList is the
-- diffServMacAceEntry. When the type is ipAce(2), the maping
-- index of differServClasssMapElementIndexList is the
-- diffServIpAceEntry. When the type is acl(3), the maping index
-- of differServClasssMapElementIndexList is the
-- diffServAclEntry. When the type is ipv6Ace(4), the maping
-- index of differServClasssMapElementIndexList is the
-- diffServIpv6AceEntry."
-- ::= { diffServClassMapEntry 5 }
--
--diffServClassMapElementIndexList OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The octet string containes the class map element indexes. Two
-- octets express one index and it is represented in
-- network order. This index list indicates the particular
-- class map elements which belong to this table. The class map
-- element uses type to indicate diffServAclEntry, the
-- diffServIpAceEntry, the diffServMacAceEntry or
-- diffServIpv6AceEntry. The type is two octet specified in
-- differServClasssMapElementIndexTypeList in order. When the
-- type is macAce(1), the maping index of
-- differServClasssMapElementIndexList is the
-- diffServMacAceEntry. When the type is ipAce(2), the maping
-- index of differServClasssMapElementIndexList is the
-- diffServIpAceEntry. When the type is acl(3), the maping index
-- of differServClasssMapElementIndexList is the
-- diffServAclEntry. When the type is ipv6Ace(4), the maping
-- index of differServClasssMapElementIndexList is the
-- diffServIpv6AceEntry."
-- ::= { diffServClassMapEntry 6 }
--
--diffServClassMapStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row or modify or delete
-- an existing row in this table.The status column has six
-- defined values:
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active'); it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServClassMapEntry 7 }
--
--diffServClassMapAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 14 }
--
--diffServClassMapAttachCtlIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Index for attachment control. Specifies the class map as
-- the target to relate with class map elements. The class
-- map identified by a particular value of this index is
-- associated with the same diffServClassMapEntry as
-- identified by the same value of diffServClassMapIndex."
-- ::= { diffServClassMapAttachCtl 1 }
--
--diffServClassMapAttachCtlElementIndexType OBJECT-TYPE
-- SYNTAX INTEGER {
-- macAce(1),
-- ipAce(2),
-- acl(3),
-- ipv6Ace(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Element Index for attachment control. Specifies the type of
-- class map element to relate with the class map. When type is
-- macAce(1), the index of diffServClassMapAttachCtlElementIndex
-- is the index of diffServMacAceEntry. When the type is
-- ipAce(2), the index of diffServClassMapAttachCtlElementIndex
-- is the index of diffServIpAceEntry. When the type is acl(3),
-- the index of diffServClassMapAttachCtlElementIndex is the
-- index of diffServAclEntry. When the type is ipv6Ace(4), the
-- index of diffServClassMapAttachCtlElementIndex is the index of
-- diffServIpv6AceEntry."
-- ::= { diffServClassMapAttachCtl 2 }
--
--diffServClassMapAttachCtlElementIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Element Index for attachment control. Specifies the class map
-- element related with the class map. The class map element uses
-- type to indicate diffServAclEntry, the diffServIpAceEntry, the
-- diffServMacAceEntry or the diffServIpv6AceEntry. The type is
-- specified in diffServClassMapAttachCtlElementIndexType. When
-- the type is macAce(1), the maping index of
-- differServClasssMapElementIndexList is the
-- diffServMacAceEntry. When the type is ipAce(2), the maping
-- index of differServClasssMapElementIndexList is the
-- diffServIpAceEntry. When the type is acl(3), the maping index
-- of differServClasssMapElementIndexList is the
-- diffServAclEntry. When the type is ipv6Ace(4), the maping
-- index of differServClasssMapElementIndexList is the
-- diffServIpv6AceEntry."
-- ::= { diffServClassMapAttachCtl 3 }
--
--diffServClassMapAttachCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noAction(1),
-- attach(2),
-- detach(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Action for attachment control. When setting this object to
-- attach(2) to begin the attaching operation, a particular class
-- map element is attached to a particular class map. When
-- setting this object to detach(3) to begin the not attached
-- operation, then a particular class map element is not attached
-- to a particular class map. When the action is finshed or no
-- action is taken, the value of this object is noAction(1). The
-- value of a particular class map is specified in the
-- AclAttachCtlTargetIndex. The class map element is specified
-- by diffServClassMapAttachCtlElementIndexType and
-- diffServClassMapAttachCtlElementIndex."
-- ::= { diffServClassMapAttachCtl 4 }
--
--diffServAclTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServAclEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for ACL."
-- ::= { diffServMgt 15 }
--
--diffServAclEntry OBJECT-TYPE
-- SYNTAX DiffServAclEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for ACL."
-- INDEX { diffServAclIndex }
-- ::= { diffServAclTable 1 }
--
--DiffServAclEntry ::= SEQUENCE
--{
-- diffServAclIndex Integer32,
-- diffServAclName DisplayString,
-- diffServAclType INTEGER,
-- diffServAclAceIndexList OCTET STRING,
-- diffServAclStatus RowStatus
--}
--
--diffServAclIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in the ACL
-- table."
-- ::= { diffServAclEntry 1 }
--
--diffServAclName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (1..16))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The name of this entry."
-- ::= { diffServAclEntry 2 }
--
--diffServAclType OBJECT-TYPE
-- SYNTAX INTEGER {
-- mac(1),
-- ipstandard(2),
-- ipextended(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The type of this entry. When the value of ACL type is
-- modified, then the ACEs in the diffServAclAceIndexList of
-- this entry will be auto-removed, and this entry will be aoto-
-- unbound from the diffServPortTable and the
-- diffServClassMapTable."
-- ::= { diffServAclEntry 3 }
--
--diffServAclAceIndexList OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The octet string containes the ACE indexes. Two octets
-- express one index and it is represented in network
-- order. This index list indicates the particular ACEs which
-- belong to this table. The ACE uses type to indicate the
-- diffServIpAceEntry, the diffServMacAceEntry or the
-- diffServIpv6AceEntry. The type is specified in
-- diffServAclType. When the type is macAce(1), the index of
-- diffServAclAceIndexList is the diffServMacAceEntry. When the
-- type is ipAce(2), the index of diffServAclAceIndexList is
-- the diffServIpAceEntry. When the type is ipv6Ace(3), the
-- index of diffServAclAceIndexListis the
-- diffServIpv6AceEntry."
-- ::= { diffServAclEntry 4 }
--
--diffServAclStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row or modify or delete
-- an existing row in this table. The status column has six
-- defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active'); it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServAclEntry 5 }
--
--diffServAclAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 16 }
--
--diffServAclAttachCtlIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Index for attachment control. Specifies the ACL as the
-- target to relate with the IP ACE, the MAC ACE or IPv6 ACE.
-- The ACL identified by a particular value of this index is
-- associated with the same diffServAclEntry as identified by
-- the same value of diffServAclIndex."
-- ::= { diffServAclAttachCtl 1 }
--
--diffServAclAttachCtlAceType OBJECT-TYPE
-- SYNTAX INTEGER {
-- macAce(1),
-- ipAce(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Type for attachment control. Specifies the type of
-- diffServAclAttachCtlAceIndex to relate with the
-- diffServAclAttachCtlIndex. When the type is macAce(1), the
-- index of diffServAclAceIndexList is the diffServMacAceEntry.
-- When the type is ipAce(2), the index of
-- diffServAclAceIndexList is the diffServIpAceEntry."
-- ::= { diffServAclAttachCtl 2 }
--
--diffServAclAttachCtlAceIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Index for attachment control. Specifies the ACE to relate with
-- the diffServAclAttachCtlIndex. When
-- diffServAclAttachCtlAceType is macAce(1), the value of
-- diffServAclAttachCtlIndex is the diffServMacAceEntry. When
-- diffServAclAttachCtlAceType is ipAce(2), the value of
-- diffServAclAttachCtlIndex is the diffServIpAceEntry. When
-- diffServAclAttachCtlAceType is ipv6Ace(3), the value of
-- diffServAclAttachCtlIndex is the diffServIpv6AceEntry."
-- ::= { diffServAclAttachCtl 3 }
--
--diffServAclAttachCtlAction OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- noAction(1),
-- attach(2),
-- detach(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Action for attachment control. When setting this object to
-- attach(2) to begin the attaching operation, a particular ACE
-- is attached to a particular ACL. When setting this object to
-- detach(3) to begin the not attached operation, then a
-- particular ACE is not attached to a particular ACL. When the
-- action is finshed or no action is taken, the value of this
-- object is noAction(1), The value of a particular ACL is
-- specified in the diffServAclAttachCtlAceType and
-- diffServAclAttachCtlAceIndex."
-- ::= { diffServAclAttachCtl 4 }
--
--diffServIpAceTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServIpAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for IP ACE."
-- ::= { diffServMgt 17 }
--
--diffServIpAceEntry OBJECT-TYPE
-- SYNTAX DiffServIpAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for IP ACE."
-- INDEX { diffServIpAceIndex }
-- ::= { diffServIpAceTable 1 }
--
--DiffServIpAceEntry ::= SEQUENCE
--{
-- diffServIpAceIndex Integer32,
-- diffServIpAceType INTEGER,
-- diffServIpAceAccess INTEGER,
-- diffServIpAceSourceIpAddr Integer32,
-- diffServIpAceSourceIpAddrBitmask Integer32,
-- diffServIpAceDestIpAddr Integer32,
-- diffServIpAceDestIpAddrBitmask Integer32,
-- diffServIpAceProtocol Integer32,
-- diffServIpAcePrec Integer32,
-- diffServIpAceTos Integer32,
-- diffServIpAceDscp Integer32,
-- diffServIpAceSourcePortOp INTEGER,
-- diffServIpAceMinSourcePort Integer32,
-- diffServIpAceMaxSourcePort Integer32,
-- diffServIpAceSourcePortBitmask Integer32,
-- diffServIpAceDestPortOp INTEGER,
-- diffServIpAceMinDestPort Integer32,
-- diffServIpAceMaxDestPort Integer32,
-- diffServIpAceDestPortBitmask Integer32,
-- diffServIpAceControlCode Integer32,
-- diffServIpAceControlCodeBitmask Integer32,
-- diffServIpAceStatus RowStatus
--}
--
--diffServIpAceIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in the IP ACE
-- table."
-- ::= { diffServIpAceEntry 1 }
--
--diffServIpAceType OBJECT-TYPE
-- SYNTAX INTEGER {
-- standard(1),
-- extended(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified IP ACE type. When the type of this entry is
-- modified, then this entry will be auto-unbound from the
-- diffServAclEntry and the not supporting field of this entry
-- will be set 0."
-- ::= { diffServIpAceEntry 2 }
--
--diffServIpAceAccess OBJECT-TYPE
-- SYNTAX INTEGER {
-- permit(1),
-- deny(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the action to be taken if a packet matches this
-- ACE."
-- ::= { diffServIpAceEntry 3 }
--
--diffServIpAceSourceIpAddr OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified source IP address. The packet's source address
-- is AND-ed with the value of IpAceSourceIpAddrBitmask and then
-- compared against the value of this object."
-- ::= { diffServIpAceEntry 4 }
--
--diffServIpAceSourceIpAddrBitmask OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified source IP address mask. The packet's source
-- address is AND-ed with the value of IpAceSourceIpAddr and
-- then compared against the value of this object."
-- ::= { diffServIpAceEntry 5 }
--
--diffServIpAceDestIpAddr OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified destination IP address. The packet's
-- destination address is AND-ed with the value of
-- diffServIpAceDestIpAddrBitmask and then compared against the
-- value of this object. This object may not be modified if the
-- associated diffServIpAceType object is equal to standard(1)."
-- ::= { diffServIpAceEntry 6 }
--
--diffServIpAceDestIpAddrBitmask OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified destination IP address mask. This object may
-- not be modified if the associated diffServIpAceType object
-- is equal to standard(1)."
-- ::= { diffServIpAceEntry 7 }
--
--diffServIpAceProtocol OBJECT-TYPE
-- SYNTAX Integer32 (0..256)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The protocol number field in the IP header used to indicate
-- the higher layer protocol as specified in RFC 1700. A value
-- of 0 matches every IP packet. The object=256 means 'any'. For
-- example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP
-- encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50
-- is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS
-- compatible IP over IP, 103 is PIMv2, 108 is PCP. This object
-- may not be modified if the associated diffServIpAceType object
-- is equal to standard(1)."
-- ::= { diffServIpAceEntry 8 }
--
--diffServIpAcePrec OBJECT-TYPE
-- SYNTAX Integer32 (0..8)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the IP precedence value to match against. The value
-- of this object is ignored whenever the value of
-- diffServIpAcePrec object is 8. This object may not be modified
-- if the associated diffServIpAceType object is equal to
-- standard(1)."
-- ::= { diffServIpAceEntry 9 }
--
--diffServIpAceTos OBJECT-TYPE
-- SYNTAX Integer32 (0..16)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the IP ToS facility value to match against. The
-- value of this object is ignored whenever the value of
-- diffServIpAcePrec object is 9. This object may not be modified
-- if the associated diffServIpAceType object is equal to
-- standard(1)."
-- ::= { diffServIpAceEntry 10 }
--
--diffServIpAceDscp OBJECT-TYPE
-- SYNTAX Integer32 (0..64)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the DSCP value to match against. The value of this
-- object is ignored whenever the value of diffServIpAcePrec
-- object is 64. This object may not be modified if the
-- associated diffServIpAceType object is equal to standard(1)."
-- ::= { diffServIpAceEntry 11 }
--
--diffServIpAceSourcePortOp OBJECT-TYPE
-- SYNTAX INTEGER {
-- noOperator(1),
-- equal(2),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's source TCP/UDP port number is to be
-- compared. noOperator(1), which is the default value, means no
-- comparison is to be made with the source TCP/UDP port
-- number. equal(2), which is used the
-- diffServIpAceSourcePortBitmask and the
-- diffServIpAceMinSourcePort to match against. range(3),which is
-- used the diffServIpAceMinSourcePort and the
-- diffServIpAceMaxSourcePort to match against. This object may
-- not be modified if the associated diffServIpAceType object is
-- equal to standard(1)."
-- ::= { diffServIpAceEntry 12 }
--
--diffServIpAceMinSourcePort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the diffServIpAceSourcePortOp is range(3), this
-- indicates the lower bound of the TCP/UDP port number
-- value range. This object may not be modified if the
-- associated diffServIpAceType object is equal to
-- standard(1)."
-- ::= { diffServIpAceEntry 13 }
--
--diffServIpAceMaxSourcePort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the diffServIpAceSourcePortOp is range(3), this indicates
-- the upper bound of the TCP/UDP port number value range. This
-- object may not be modified if the associated
-- diffServIpAceType object is equal to standard(1)."
-- ::= { diffServIpAceEntry 14 }
--
--diffServIpAceSourcePortBitmask OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the diffServIpAceSourcePortOp is equal(2), this indicates
-- the bitmask of the diffServIpAceMinSourcePort. This object may
-- not be modified if the associated diffServIpAceType object is
-- equal to standard(1)."
-- ::= { diffServIpAceEntry 15 }
--
--diffServIpAceDestPortOp OBJECT-TYPE
-- SYNTAX INTEGER{
-- noOperator(1),
-- equal(2),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
-- to be compared. noOperator(1), which is the default value,
-- means that no comparison is to be made with the destination
-- TCP/UDP port number. equal(2), which is used the
-- diffServIpAceSourcePortBitmask and the
-- diffServIpAceMinDestPort to match against. range(3),which is
-- used the diffServIpAceMinDestPort and the
-- diffServIpAceMaxDestPort to match against. This object may not
-- be modified if the associated diffServIpAceType object is
-- equal to standard(1)."
-- ::= { diffServIpAceEntry 16 }
--
--diffServIpAceMinDestPort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the diffServIpAceDestPortOp is range(3), this indicates
-- the lower bound of the TCP/UDP port number value range. This
-- object may not be modified if the associated
-- diffServIpAceType object is equal to standard(1)."
-- ::= { diffServIpAceEntry 17 }
--
--diffServIpAceMaxDestPort OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the diffServIpAceDestPortOp is range(3), this indicates
-- the upper bound of the TCP/UDP port number value range. This
-- object may not be modified if the associated
-- diffServIpAceType object is equal to standard(1)."
-- ::= { diffServIpAceEntry 18 }
--
--diffServIpAceDestPortBitmask OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "If the diffServIpAceDestPortOp is equal(2), this indicates
-- the bitmask of the diffServIpAceMinDestPort. This object may
-- not be modified if the associated diffServIpAceType object
-- is equal to standard(1)."
-- ::= { diffServIpAceEntry 19 }
--
--diffServIpAceControlCode OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how the control flags of TCP packets are to be
-- compared. diffServIpAceControlCode is AND-ed with
-- diffServIpAceControlCodeBitmask. This object may not be
-- modified if the associated diffServIpAceType object is
-- equal to standard(1)."
-- ::= { diffServIpAceEntry 20 }
--
--diffServIpAceControlCodeBitmask OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how the control flags of TCP packets are to be
-- compared. It can be used to check multiple flags of the FIN,
-- SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
-- PSH=8, ACK=16, URG=32. This object may not be modified if the
-- associated diffServIpAceType object is equal to standard(1)."
-- ::= { diffServIpAceEntry 21 }
--
--diffServIpAceStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row or modify or delete
-- an existing row in this table. The status column has six
-- defined values:
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active'); it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServIpAceEntry 22 }
--
--diffServMacAceTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServMacAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for MAC ACE."
-- ::= { diffServMgt 18 }
--
--diffServMacAceEntry OBJECT-TYPE
-- SYNTAX DiffServMacAceEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for MAC ACE."
-- INDEX { diffServMacAceIndex }
-- ::= { diffServMacAceTable 1 }
--
--DiffServMacAceEntry ::= SEQUENCE
--{
-- diffServMacAceIndex Integer32,
-- diffServMacAceAccess INTEGER,
-- diffServMacAcePktformat INTEGER,
-- diffServMacAceSourceMacAddr MacAddress,
-- diffServMacAceSourceMacAddrBitmask MacAddress,
-- diffServMacAceDestMacAddr MacAddress,
-- diffServMacAceDestMacAddrBitmask MacAddress,
-- diffServMacAceVidOp INTEGER,
-- diffServMacAceMinVid Integer32,
-- diffServMacAceVidBitmask Integer32,
-- diffServMacAceMaxVid Integer32,
-- diffServMacAceEtherTypeOp INTEGER,
-- diffServMacAceEtherTypeBitmask Integer32,
-- diffServMacAceMinEtherType Integer32,
-- diffServMacAceMaxEtherType Integer32,
-- diffServMacAceStatus RowStatus
--}
--
--diffServMacAceIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in the MAC ACE
-- table."
-- ::= { diffServMacAceEntry 1 }
--
--diffServMacAceAccess OBJECT-TYPE
-- SYNTAX INTEGER {
-- permit(1),
-- deny(2)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the action to be taken if a packet matches this
-- ACE."
-- ::= { diffServMacAceEntry 2 }
--
--diffServMacAcePktformat OBJECT-TYPE
-- SYNTAX INTEGER {
-- any(1),
-- untagged-Eth2(2),
-- untagged802Dot3(3),
-- tagggedEth2(4),
-- tagged802Dot3(5)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Used to check the packet format of the packets. This object
-- cannot be configured when the status of the entry,
-- diffServMacAceStatus, is active(1)."
-- ::= { diffServMacAceEntry 3 }
--
--diffServMacAceSourceMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the 48-bit source MAC address. The specified source
-- MAC of the packet. The packet's source MAC address is AND-ed
-- with the value of diffServMacAceSourceMacAddrBitmask
-- and then compared against the value of this object."
-- ::= { diffServMacAceEntry 4 }
--
--diffServMacAceSourceMacAddrBitmask OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified source MAC address mask."
-- ::= { diffServMacAceEntry 5 }
--
--diffServMacAceDestMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the 48-bit destination MAC address. The specified
-- destination MAC of the packet. The packet's destination MAC
-- address is AND-ed with the value of
-- diffServMacAceDestMacAddrBitmask and then compared against
-- the value of this object."
-- ::= { diffServMacAceEntry 6 }
--
--diffServMacAceDestMacAddrBitmask OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The specified destination MAC address mask."
-- ::= { diffServMacAceEntry 7 }
--
--diffServMacAceVidOp OBJECT-TYPE
-- SYNTAX INTEGER {
-- noOperator(1),
-- equal(2),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's VID is to be compared. This
-- object cannot be configured when the status of the entry,
-- diffServMacAceStatus, is active(1)."
-- ::= { diffServMacAceEntry 8 }
--
--diffServMacAceMinVid OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the lower bound of the VID value range if the
-- diffServMacAceVidOp is range(3)."
-- ::= { diffServMacAceEntry 9 }
--
--diffServMacAceVidBitmask OBJECT-TYPE
-- SYNTAX Integer32 (0..'0FFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The bitmask of the VID if the diffServMacAceVidOp is
-- equal(2). Default value is 0xfff."
-- ::= { diffServMacAceEntry 10 }
--
--diffServMacAceMaxVid OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the upper bound of the VID value range if the
-- diffServMacAceVidOp is range(3). This object cannot be
-- configured when the status of the entry,
-- diffServMacAceStatus, is active(1)."
-- ::= { diffServMacAceEntry 11 }
--
--diffServMacAceEtherTypeOp OBJECT-TYPE
-- SYNTAX INTEGER {
-- noOperator(1),
-- equal(2),
-- range(3)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates how a packet's ether type is to be compared."
-- ::= { diffServMacAceEntry 12 }
--
--diffServMacAceEtherTypeBitmask OBJECT-TYPE
-- SYNTAX Integer32 (0..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The bitmask of ether type if the diffServMacAceEtherTypeOp is
-- equal(2). The default value is 'FFFF'h."
-- ::= { diffServMacAceEntry 13 }
--
--diffServMacAceMinEtherType OBJECT-TYPE
-- SYNTAX Integer32 ('0600'h..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the lower bound of the ether type value range
-- if the diffServMacAceEtherTypeOp is range(3)."
-- ::= { diffServMacAceEntry 14 }
--
--diffServMacAceMaxEtherType OBJECT-TYPE
-- SYNTAX Integer32 ('0600'h..'FFFF'h)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Indicates the upper bound of the ether type value range if
-- the diffServMacAceEtherTypeOp is range(3)."
-- ::= { diffServMacAceEntry 15 }
--
--diffServMacAceStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row or modify or delete
-- an existing row in this table. The status column has six
-- defined values:
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active'); it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServMacAceEntry 16 }
--
--diffServActionTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServActionEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for action."
-- ::= { diffServMgt 19 }
--
--diffServActionEntry OBJECT-TYPE
-- SYNTAX DiffServActionEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for action."
-- INDEX { diffServActionIndex }
-- ::= { diffServActionTable 1 }
--
--DiffServActionEntry ::= SEQUENCE
--{
-- diffServActionIndex Integer32,
-- diffServActionList BITS,
-- diffServActionPktNewPri Integer32,
-- diffServActionPktNewIpPrec Integer32,
-- diffServActionPktNewDscp Integer32,
-- diffServActionRedPktNewDscp Integer32,
-- diffServActionRedDrop EnabledStatus,
-- diffServActionStatus RowStatus
--}
--
--diffServActionIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An index that uniquely identifies an entry in the
-- action table."
-- ::= { diffServActionEntry 1 }
--
--diffServActionList OBJECT-TYPE
-- SYNTAX BITS
-- {
-- actionPktNewPri(0),
-- actionPktNewIpPrec(1),
-- actionPktNewDscp(2),
-- actionRedPktNewDscp(3),
-- actionRedDrop(4)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The bitmap value used to identify which action
-- capabilities are enabled on the entry. The
-- actionPktNewPri, actionPktNewIpPrec and
-- actionPktNewDscp can not be enabled at the
-- same time on the entry. The actionRedPktNewDscp and
-- actionRedDrop can not be enabled at the same
-- time on the entry."
-- ::= { diffServActionEntry 2 }
--
--diffServActionPktNewPri OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the new priority value for the packet when
-- the action is satisfied. If the actionPktNewPri bit of
-- the diffServActionList is not enabled, this object can
-- not be set."
-- ::= { diffServActionEntry 3 }
--
--diffServActionPktNewIpPrec OBJECT-TYPE
-- SYNTAX Integer32 (0..7)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the new IP precedence facility value for
-- the packet when the action is satisfied. If the
-- actionPktNewIpPrec bit of the diffServActionList is not
-- enabled, this object can not be set."
-- ::= { diffServActionEntry 4 }
--
--diffServActionPktNewDscp OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the new DSCP value for the packet when
-- the action is satisfied. If the actionPktNewDscp bit of
-- the diffServActionList is not enabled, this object
-- can not be set."
-- ::= { diffServActionEntry 5 }
--
--diffServActionRedPktNewDscp OBJECT-TYPE
-- SYNTAX Integer32 (0..63)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Specifies the new DSCP value for the red
-- marking packet when the action is satisfied. If the
-- actionRedPktNewDscp bit of the diffServActionList is
-- not enabled, this object can not be set."
-- ::= { diffServActionEntry 6 }
--
--diffServActionRedDrop OBJECT-TYPE
-- SYNTAX EnabledStatus
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The actionRedDrop bit of the
-- diffServActionList is for configuring this
-- object. If the value of this object is enabled, the
-- red marking packet will be dropped."
-- ::= { diffServActionEntry 7 }
--
--diffServActionStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row, modify or
-- delete an existing row in this table.
-- The status column has six defined values:
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row
-- is available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use
-- by the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically
-- set to active, making it available for use by the
-- managed device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management
-- station wishing to delete all of the instances
-- associated with an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService'
-- or 'active'. That is, when queried, an existing
-- conceptual row has only three states: it is either
-- available for use by the managed device (the status column
-- has the value 'active'); it is not available for use by
-- the managed device, though the agent has sufficient
-- information to make it so (the status column has the value
-- 'notInService'); or, it is not available for use by the
-- managed device, and an attempt to make it so would fail
-- because the agent has insufficient information (the state
-- column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServActionEntry 8 }
--
--diffServMeterTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DiffServMeterEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Table for meter."
-- ::= { diffServMgt 20 }
--
--diffServMeterEntry OBJECT-TYPE
-- SYNTAX DiffServMeterEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Entry for meter."
-- INDEX { diffServActionIndex }
-- ::= { diffServMeterTable 1 }
--
--DiffServMeterEntry ::= SEQUENCE
--{
-- diffServMeterIndex Integer32,
-- diffServMeterModel INTEGER,
-- diffServMeterRate Integer32,
-- diffServMeterBurstSize Integer32,
-- diffServMeterInterval Integer32,
-- diffServMeterStatus RowStatus
--}
--
--diffServMeterIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An entry that describes a single set of token bucket
-- parameters."
-- ::= { diffServMeterEntry 1 }
--
--diffServMeterModel OBJECT-TYPE
-- SYNTAX INTEGER {
-- default(1),
-- flow(2),
-- trTcmColorBlind(3),
-- trTcmColorAware(4),
-- srTcmColorBlind(5),
-- srTcmColorAware(6)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The Metering algorithm associated with the Token Bucket
-- parameters. The zeroDotZero indicates this is unknown."
-- ::= { diffServMeterEntry 2 }
--
--diffServMeterRate OBJECT-TYPE
-- SYNTAX Integer32 (1..100000)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The token-bucket rate, in kilobits per second (kbps)."
-- ::= { diffServMeterEntry 3 }
--
--diffServMeterBurstSize OBJECT-TYPE
-- SYNTAX Integer32 (64..1522)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The maximum number of bytes in a single transmission burst."
-- ::= { diffServMeterEntry 4 }
--
--diffServMeterInterval OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "The time interval used with the token bucket. "
-- ::= { diffServMeterEntry 5 }
--
--diffServMeterStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "This object is used to create a new row or modify or delete
-- an existing row in this table. The status column has six
-- defined values:
--
-- The status column has six defined values:
--
-- - 'active', which indicates that the conceptual row is
-- available for use by the managed device;
--
-- - 'notInService', which indicates that the conceptual
-- row exists in the agent, but is unavailable for use by
-- the managed device (see NOTE below);
--
-- - 'notReady', which indicates that the conceptual row
-- exists in the agent, but is missing information
-- necessary in order to be available for use by the
-- managed device;
--
-- - 'createAndGo', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row and to have its status automatically set
-- to active, making it available for use by the managed
-- device;
--
-- - 'createAndWait', which is supplied by a management
-- station wishing to create a new instance of a
-- conceptual row (but not make it available for use by
-- the managed device); and,
--
-- - 'destroy', which is supplied by a management station
-- wishing to delete all of the instances associated with
-- an existing conceptual row.
--
-- Whereas five of the six values (all except 'notReady') may
-- be specified in a management protocol set operation, only
-- three values will be returned in response to a management
-- protocol retrieval operation: 'notReady', 'notInService' or
-- 'active'. That is, when queried, an existing conceptual row
-- has only three states: it is either available for use by
-- the managed device (the status column has the value
-- 'active'); it is not available for use by the managed device,
-- though the agent has sufficient information to make it so
-- (the status column has the value 'notInService'); or, it is
-- not available for use by the managed device, and an attempt
-- to make it so would fail because the agent has insufficient
-- information (the state column has the value 'notReady').
--
-- For a detailed description of this object, please refer to
-- SNMPv2-TC MIB."
-- ::= { diffServMeterEntry 6 }
END
View Git Blame Copy Permalink