Observium_CE/mibs/d-link/DLINKPRIME-PACKET-MONITOR-MIB

105 lines
3.7 KiB
Plaintext

-- *****************************************************************
-- DLINKPRIME-PACKET-MONITOR-MIB.mib : Packet Monitoring MIB
--
-- Copyright (c) 2014 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKPRIME-PACKET-MONITOR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
DisplayString, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex, InterfaceIndexOrZero
FROM IF-MIB
VlanId
FROM Q-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
dlinkPrimeCommon
FROM DLINK-ID-REC-MIB;
dlinkPrimePktMonitorMIB MODULE-IDENTITY
LAST-UPDATED "201406030000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB module defines objects for configuring Monitoring Traffic.
Acronyms and terminology:
SPAN (Switched Port Analyzer): Mirror network traffic for analysis
by a network analyzer.
Local-SPAN: The SPAN feature is local when the monitored ports are
all located on the same switch as the destination port.
RSPAN (Remote SPAN): Source ports and destination ports that are
distributed across multiple switches, allowing one to monitor
any destination port located on the RSPAN VLAN."
REVISION "201406030000Z"
DESCRIPTION
"This is the first version of the MIB file."
::= { dlinkPrimeCommon 10 }
-- -----------------------------------------------------------------------------
dpPktMonMIBNotifications OBJECT IDENTIFIER ::= { dlinkPrimePktMonitorMIB 0 }
dpPktMonMIBObjects OBJECT IDENTIFIER ::= { dlinkPrimePktMonitorMIB 1 }
dpPktMonMIBConformance OBJECT IDENTIFIER ::= { dlinkPrimePktMonitorMIB 2 }
-- -----------------------------------------------------------------------------
-- Monitor Session Management
-- -----------------------------------------------------------------------------
dpPktMonDstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port to which the mirrored traffic in the system
is to be copied."
::= { dpPktMonMIBObjects 1 }
dpPktMonMirrorType OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mirror packet type."
::= { dpPktMonMIBObjects 2 }
dpPktMonSrcPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring
over this interface to the destination port."
::= { dpPktMonMIBObjects 3 }
-- -----------------------------------------------------------------------------
-- MIB Conformance statements
-- -----------------------------------------------------------------------------
dpPktMonMIBCompliances OBJECT IDENTIFIER
::= { dpPktMonMIBConformance 1 }
END