1291 lines
44 KiB
Plaintext
1291 lines
44 KiB
Plaintext
|
|
-- DLINK Private MIB
|
|
-- DLINK agents also support the following Public MIBs:
|
|
-- MIB-II ( RFC1213 )
|
|
-- dlkEnterpriseAP-dlk80211bPlus MODULE
|
|
|
|
DLINK-WLAN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
mgmt, enterprises, IpAddress FROM RFC1155-SMI
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI
|
|
-- OBJECT-TYPE, Integer32, Counter32 FROM RFC-1212
|
|
DisplayString, MacAddress, RowStatus,
|
|
TruthValue FROM SNMPv2-TC
|
|
ifIndex FROM RFC1213-MIB
|
|
;
|
|
|
|
|
|
--mgmt OBJECT IDENTIFIER ::= { iso org(3) dod(6) internet(1) mgmt(2) }
|
|
--mib OBJECT IDENTIFIER ::= { mgmt 1 }
|
|
--directory OBJECT IDENTIFIER ::= { internet 1 }
|
|
--experimental OBJECT IDENTIFIER ::= { internet 3 }
|
|
--private OBJECT IDENTIFIER ::= { internet 4 }
|
|
--enterprises OBJECT IDENTIFIER ::= { private 1 }
|
|
|
|
dlink OBJECT IDENTIFIER ::= { enterprises 171 }
|
|
|
|
|
|
--should be implemented as module
|
|
--dlkEnterpriseAP OBJECT IDENTIFIER ::= { dlink 1 }
|
|
--dlkWLANRouter OBJECT IDENTIFIER ::= { dlink 2 }
|
|
--dlkRouter OBJECT IDENTIFIER ::= { dlink 3 }
|
|
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- **********************************************************************
|
|
dlkEnterpriseAP MODULE-IDENTITY
|
|
LAST-UPDATED "200208160000Z"
|
|
ORGANIZATION "D-Link, Inc."
|
|
CONTACT-INFO
|
|
"Postal: D-Link, Inc.
|
|
2F, No.233-2, Pao-Chiao Road,
|
|
Hsin-Tien, Taipei,
|
|
Taiwan, R.O.C.
|
|
Tel: +886-2-29161600
|
|
Fax: +886-2-29146299"
|
|
|
|
DESCRIPTION
|
|
"The MIB module for D-Link 802.11 series product.
|
|
This module derived from IEEE ieee802dot11"
|
|
::= { dlink 1 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * end of MODULE IDENTITY
|
|
-- **********************************************************************
|
|
|
|
-- dlkEnterpriseAP OBJECT IDs Groups
|
|
|
|
dlkEnterpriseAPsys OBJECT IDENTIFIER ::= { dlkEnterpriseAP 1 }
|
|
dlkEnterpriseAPlan OBJECT IDENTIFIER ::= { dlkEnterpriseAP 2 }
|
|
dlk80211bPlusDot11 OBJECT IDENTIFIER ::= { dlkEnterpriseAP 3 }
|
|
dlkEnterpriseAPTrap OBJECT IDENTIFIER ::= { dlkEnterpriseAP 4 }
|
|
|
|
-- **********************************************************************
|
|
-- * Major sections
|
|
-- **********************************************************************
|
|
-- **********************************************************************
|
|
-- * dlkEnterpriseAPsys sections
|
|
-- **********************************************************************
|
|
enterpriseAPSysConfigSave OBJECT-TYPE
|
|
SYNTAX INTEGER { write(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"User must manually SET this OID in order to save the change(s) made through SNMP to
|
|
main configuration."
|
|
|
|
::= { dlkEnterpriseAPsys 1 }
|
|
|
|
enterpriseAPSysReboot OBJECT-TYPE
|
|
SYNTAX INTEGER { reboot(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute is to reboot the enterprise AP system.
|
|
Doesn't save the changes that had been made."
|
|
|
|
::= { dlkEnterpriseAPsys 2 }
|
|
|
|
enterpriseAPSysConfigApply OBJECT-TYPE
|
|
SYNTAX INTEGER { saveAndReboot(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute is equivalent of setting enterpriseAPSysConfigSave then
|
|
enterpriseAPSysConfigApply."
|
|
|
|
::= { dlkEnterpriseAPsys 3 }
|
|
|
|
-- **********************************************************************
|
|
-- * end of dlkEnterpriseAPsys sections
|
|
-- **********************************************************************
|
|
|
|
-- Station ManagemenT (SMT) Attributes
|
|
-- DEFINED AS "The SMT object class provides the necessary support at the
|
|
-- station to manage the processes in the station such that the
|
|
-- station may work cooperatively as a part of an IEEE 802.11 network.";
|
|
|
|
dot11smt OBJECT IDENTIFIER ::= { dlk80211bPlusDot11 1 }
|
|
|
|
dot11StationConfigEntry OBJECT IDENTIFIER ::= { dot11smt 1 }
|
|
dot11APModeConfigEntry OBJECT IDENTIFIER ::= { dot11smt 2 }
|
|
dot11PrivacyEntry OBJECT IDENTIFIER ::= { dot11smt 3 }
|
|
|
|
-- MAC Attributes
|
|
-- DEFINED AS "The MAC object class provides the necessary support
|
|
-- for the access control, generation, and verification of frame check
|
|
-- sequences, and proper delivery of valid data to upper layers.";
|
|
|
|
dot11mac OBJECT IDENTIFIER ::= {dlk80211bPlusDot11 2}
|
|
|
|
dot11OperationEntry OBJECT IDENTIFIER ::= {dot11mac 1}
|
|
dot11CountersEntry OBJECT IDENTIFIER ::= {dot11mac 2}
|
|
-- dot11GroupAddressesTable ::= {dot11mac 3}
|
|
|
|
-- Resource Type ID
|
|
dot11res OBJECT IDENTIFIER ::= {dlk80211bPlusDot11 3}
|
|
dot11resAttribute OBJECT IDENTIFIER ::= {dot11res 1 }
|
|
|
|
-- PHY Attributes
|
|
-- DEFINED AS "The PHY object class provides the necessary support
|
|
-- for required PHY operational information that may vary from PHY
|
|
-- to PHY and from STA to STA to be communicated to upper layers."
|
|
|
|
dot11phy OBJECT IDENTIFIER ::= {dlk80211bPlusDot11 4}
|
|
|
|
dot11PhyOperationEntry OBJECT IDENTIFIER ::= {dot11phy 1}
|
|
dot11PhyAntennaEntry OBJECT IDENTIFIER ::= {dot11phy 2}
|
|
dot11PhyTxPowerEntry OBJECT IDENTIFIER ::= {dot11phy 3}
|
|
dot11PhyDSSSEntry OBJECT IDENTIFIER ::= {dot11phy 4}
|
|
|
|
|
|
-- ****************************************************************************************
|
|
-- dlkEnterpriseAPsys - system/platform MIB elements
|
|
-- ****************************************************************************************
|
|
|
|
|
|
-- ****************************************************************************************
|
|
-- dlkEnterpriseAPlan - Ethernet Standard MIB elements
|
|
-- ****************************************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Textual conventions from 802 definitions
|
|
-- **********************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * SMT Station Config Table
|
|
-- **********************************************************************
|
|
|
|
|
|
dot11StationID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
|
|
"The purpose of dot11StationID is to allow a manager to identify
|
|
a station for its own purposes. This attribute provides
|
|
for that eventuality while keeping the true MAC address
|
|
independent. Its syntax is MAC address and default value
|
|
is the station's assigned, unique MAC address."
|
|
|
|
::= { dot11StationConfigEntry 1 }
|
|
|
|
dot11PrivacyOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute, when true, shall indicate that the IEEE
|
|
802.11 WEP option is implemented. The default value of
|
|
this attribute shall be false."
|
|
|
|
::= { dot11StationConfigEntry 2 }
|
|
|
|
dot11PowerManagementMode OBJECT-TYPE
|
|
SYNTAX INTEGER { active(1), powersave(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the power management
|
|
mode of the STA. When set to active, it shall indicate
|
|
that the station is not in power-save mode. When set
|
|
to powersave, it shall indicate that the station is
|
|
in power-save mode. The power management mode is
|
|
transmitted in all frames according to the rules
|
|
in 7.1.3.1.7."
|
|
::= { dot11StationConfigEntry 3 }
|
|
|
|
dot11DesiredSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute reflects the Service Set ID used
|
|
in the DesiredSSID parameter of the most recent
|
|
MLME_Scan.request. This value may be modified
|
|
by an external management entity and used by the
|
|
local SME to make decisions about the Scanning process."
|
|
::= { dot11StationConfigEntry 4 }
|
|
|
|
dot11DesiredBSSType OBJECT-TYPE
|
|
SYNTAX INTEGER { infrastructure(1), independent(2), any(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the type of BSS the
|
|
station shall use when scanning for a BSS with which
|
|
to synchronize. This value is used to filter Probe
|
|
Response frames and Beacons. When set to infrastructure,
|
|
the station shall only synchronize with a BSS whose
|
|
Capability Information field has the ESS subfield set
|
|
to 1. When set to independent, the station shall only
|
|
synchronize with a BSS whose Capability Information
|
|
field has the IBSS subfield set to 1. When set to
|
|
any, the station may synchronize to either type of
|
|
BSS."
|
|
::= { dot11StationConfigEntry 5 }
|
|
|
|
dot11OperationalRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..126))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the set of data rates
|
|
at which the station may transmit data. Each octet
|
|
contains a value representing a rate. Each rate
|
|
shall be within the range from 2 to 127,
|
|
corresponding to data rates in increments of
|
|
500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be
|
|
supported (as indicated in the supported rates
|
|
table) for receiving data. This value is reported in
|
|
transmitted Beacon, Probe Request, Probe Response,
|
|
Association Request, Association Response,
|
|
Reassociation Request, and Reassociation Response
|
|
frames, and is used to determine whether a BSS
|
|
with which the station desires to synchronize is
|
|
suitable. It is also used when starting a BSS,
|
|
as specified in 10.3.
|
|
|
|
This atribute also indicate the Basic Rate of the AP,
|
|
rate that is used as transmit rate of 802.11
|
|
management and control packet. If 22Mbps is as
|
|
basic rate, the bit 7(MSB) should be set(i.e. 0xAC,
|
|
instead of 0x2C).
|
|
Valid basic rate are (2-1)Mbps, (11-5.5-2-1)Mbps,
|
|
(22-11-5.5-2-1)Mbps.
|
|
example:
|
|
(2-1)Mbps : 0x2C160B8482
|
|
(11-5.5-2-1)Mbps : 0x2C968B8482
|
|
(22-11-5.5-2-1)Mbps : 0xAC968B8482"
|
|
::= { dot11StationConfigEntry 6 }
|
|
|
|
dot11BeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
station shall use for scheduling Beacon transmissions.
|
|
This value is transmitted in Beacon and Probe Response
|
|
frames."
|
|
::= { dot11StationConfigEntry 7 }
|
|
|
|
dot11DTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of beacon
|
|
intervals that shall elapse between transmission of
|
|
Beacons frames containing a TIM element whose DTIM
|
|
Count field is 0. This value is transmitted in
|
|
the DTIM Period field of Beacon frames."
|
|
::= { dot11StationConfigEntry 8 }
|
|
|
|
dot11DisassociateReason OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the most recently
|
|
transmitted Reason Code in a Disassociation
|
|
frame. If no Disassociation frame has been
|
|
transmitted, the value of this attribute shall
|
|
be 0."
|
|
|
|
REFERENCE "IEEE Std 802.11-1997, 7.3.1.7"
|
|
::= { dot11StationConfigEntry 9 }
|
|
|
|
dot11DisassociateStation OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the MAC address from the
|
|
Address 1 field of the most recently transmitted
|
|
Disassociation frame. If no Disassociation
|
|
frame has been transmitted, the value of this
|
|
attribute shall be 0."
|
|
::= { dot11StationConfigEntry 10 }
|
|
|
|
dot11DeauthenticateReason OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the most recently
|
|
transmitted Reason Code in a Deauthentication
|
|
frame. If no Deauthentication frame has been
|
|
transmitted, the value of this attribute shall
|
|
be 0."
|
|
|
|
REFERENCE "IEEE Std 802.11-1997, 7.3.1.7"
|
|
::= { dot11StationConfigEntry 11 }
|
|
|
|
dot11DeauthenticateStation OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the MAC address from the
|
|
Address 1 field of the most recently transmitted
|
|
Deauthentication frame. If no Deauthentication
|
|
frame has been transmitted, the value of this
|
|
attribute shall be 0."
|
|
::= { dot11StationConfigEntry 12 }
|
|
|
|
dot11AuthenticateFailStatus OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the most recently
|
|
transmitted Status Code in a failed
|
|
Authentication frame. If no failed
|
|
Authentication frame has been transmitted, the
|
|
value of this attribute shall be 0."
|
|
|
|
REFERENCE "IEEE Std 802.11-1997, 7.3.1.9"
|
|
::= { dot11StationConfigEntry 13 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11StationConfig TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11EnterpriseConfigEntry TABLE
|
|
-- **********************************************************************
|
|
|
|
dot11AccessPointMode OBJECT-TYPE
|
|
SYNTAX INTEGER { accessPoint (1),
|
|
wirelessBridge (2),
|
|
wirelessAPClient (3),
|
|
wirelessMultiBridge (4),
|
|
backupAccessPoint (5),
|
|
repeater (6),
|
|
groupAccessPoint (7) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall be a set of all the access point mode
|
|
supported by the AP. The following are the
|
|
default values and the associated mode.
|
|
Value = 1: Normal AP
|
|
Value = 2: Wireless Bridge
|
|
Value = 3: Wireless AP Client
|
|
Value = 4: Wireless Multi Bridge
|
|
Value = 5: Backup AP
|
|
Value = 6: Repeater
|
|
Value = 7: Group AP"
|
|
|
|
::= { dot11APModeConfigEntry 1 }
|
|
|
|
dot11RemoteMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This Remote MAC Address used by these following AP mode:
|
|
Wireless Bridge, Wireless AP Client, Backup AP, Repeater.
|
|
Consequently, this attribute must be set if any above mentioned
|
|
mode is desired."
|
|
|
|
::= { dot11APModeConfigEntry 2 }
|
|
|
|
dot11BackupAPRemoteServerIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute used to check the wired LAN connection
|
|
(A.K.A. Link Integrity) when AP in Backup AP mode."
|
|
|
|
::= { dot11APModeConfigEntry 3 }
|
|
|
|
dot11GroupAPID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute is to identify current Group ID of the AP."
|
|
|
|
::= { dot11APModeConfigEntry 4 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11EnterpriseConfigEntry TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11PrivacyTable TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
dot11AuthenticationAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { openSystem (1), sharedKey (2), both (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall be the authentication algorithms currently used
|
|
by the AP. The following are the default values and the associated algorithm.
|
|
Value = 1: Open System
|
|
Value = 2: Shared Key
|
|
Value = 3: Both Open System and Shared Key"
|
|
|
|
::= { dot11PrivacyEntry 1 }
|
|
|
|
dot11PrivacyInvoked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"When this attribute is true, it shall indicate that the IEEE
|
|
802.11 WEP mechanism is used for transmitting frames of type
|
|
Data. The default value of this attribute shall be false."
|
|
::= { dot11PrivacyEntry 2 }
|
|
|
|
dot11WEPDefaultKeyID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall indicate the use of the first,
|
|
second, third, or fourth element of the WEPDefaultKeys
|
|
array when set to values of zero, one, two, or three. The
|
|
default value of this attribute shall be 0."
|
|
REFERENCE "IEEE Std 802.11-1997, 8.3.2"
|
|
::= { dot11PrivacyEntry 3 }
|
|
|
|
dot11WEPKeyLength OBJECT-TYPE
|
|
SYNTAX INTEGER { w-64Bit (1), w-128Bit (2), w-256Bit (3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall indicate the length of WEP encryption length used.
|
|
Value 1: 64 bit that need 5 characters of WEP Default Key
|
|
Value 2: 128 bit that need 13 characters of WEP Default Key
|
|
Value 3: 256 bit that need 29 characters of WEP Default Key"
|
|
::= { dot11PrivacyEntry 4 }
|
|
|
|
dot11WEPKeyMappingLength OBJECT-TYPE
|
|
SYNTAX INTEGER (10..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of tuples that dot11WEPKeyMappings can hold."
|
|
REFERENCE "IEEE Std 802.11-1997, 8.3.2"
|
|
::= { dot11PrivacyEntry 5 }
|
|
|
|
dot11ExcludeUnencrypted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"When this attribute is true, the STA shall not indicate at
|
|
the MAC service interface received MSDUs that have the WEP
|
|
subfield of the Frame Control field equal to zero. When this
|
|
attribute is false, the STA may accept MSDUs that have the WEP
|
|
subfield of the Frame Control field equal to zero. The default
|
|
value of this attribute shall be false."
|
|
|
|
::= { dot11PrivacyEntry 6 }
|
|
|
|
dot11WEPICVErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a frame is received with the
|
|
WEP subfield of the Frame Control field set to one and the value
|
|
of the ICV as received in the frame does not match the ICV value
|
|
that is calculated for the contents of the received frame."
|
|
::= { dot11PrivacyEntry 7 }
|
|
|
|
dot11WEPExcludedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a frame is received with the
|
|
WEP subfield of the Frame Control field set to zero and the value
|
|
of dot11ExcludeUnencrypted causes that frame to be discarded."
|
|
::= { dot11PrivacyEntry 8 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11Privacy TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * MAC Attribute Templates
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11OperationTable TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
dot11MACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique MAC Address assigned to the STA."
|
|
::= { dot11OperationEntry 1 }
|
|
|
|
dot11RTSThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (256..2432)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall indicate the number of octets in an MPDU,
|
|
below which an RTS/CTS handshake shall not be performed. An
|
|
RTS/CTS handshake shall be performed at the beginning of any
|
|
frame exchange sequence where the MPDU is of type Data or
|
|
Management, the MPDU has an individual address in the Address1
|
|
field, and the length of the MPDU is greater than
|
|
this threshold. (For additional details, refer to Table 21 in
|
|
9.7.) Setting this attribute to be larger than the maximum
|
|
MSDU size shall have the effect of turning off the RTS/CTS
|
|
handshake for frames of Data or Management type transmitted by
|
|
this STA. Setting this attribute to zero shall have the effect
|
|
of turning on the RTS/CTS handshake for all frames of Data or
|
|
Management type transmitted by this STA. The default value of
|
|
this attribute shall be 2347."
|
|
|
|
::= { dot11OperationEntry 2 }
|
|
|
|
dot11ShortRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall indicate the maximum number of
|
|
transmission attempts of a frame, the length of which is less
|
|
than or equal to dot11RTSThreshold, that shall be made before a
|
|
failure condition is indicated. The default value of this
|
|
attribute shall be 7."
|
|
|
|
::= { dot11OperationEntry 3 }
|
|
|
|
dot11LongRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall indicate the maximum number of
|
|
transmission attempts of a frame, the length of which is
|
|
greater than dot11RTSThreshold, that shall be made before a
|
|
failure condition is indicated. The default value of this
|
|
attribute shall be 4."
|
|
|
|
::= { dot11OperationEntry 4 }
|
|
|
|
dot11FragmentationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (256..2346)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall specify the current maximum size, in
|
|
octets, of the MPDU that may be delivered to the PHY. An MSDU
|
|
shall be broken into fragments if its size exceeds the value
|
|
of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256. "
|
|
|
|
::= { dot11OperationEntry 5 }
|
|
|
|
dot11SSIDBroadcast OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute indicate whether SSID broadcast is enabled."
|
|
|
|
::= { dot11OperationEntry 6 }
|
|
|
|
dot11PreambleType OBJECT-TYPE
|
|
SYNTAX INTEGER { longPreamble (1), shortPreamble (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute indicate what preamble type is used.
|
|
The default value should be Long Preamble."
|
|
|
|
::= { dot11OperationEntry 7 }
|
|
|
|
dot11MaxTransmitMSDULifetime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The MaxTransmitMSDULifetime shall be the elapsed time in TU,
|
|
after the initial transmission of an MSDU, after which further
|
|
attempts to transmit the MSDU shall be terminated. The default
|
|
value of this attribute shall be 512."
|
|
|
|
::= { dot11OperationEntry 8 }
|
|
|
|
dot11MaxReceiveLifetime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The MaxReceiveLifetime shall be the elapsed time in TU,
|
|
after the initial reception of a fragmented MMPDU or MSDU,
|
|
after which further attempts to reassemble the MMPDU or
|
|
MSDU shall be terminated. The default value shall be
|
|
512."
|
|
::= { dot11OperationEntry 9 }
|
|
|
|
dot11ManufacturerID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The ManufacturerID shall include, at a minimum, the name
|
|
of the manufacturer. It may include additional
|
|
information at the manufacturer's discretion. The default
|
|
value of this attribute shall be null."
|
|
|
|
::= { dot11OperationEntry 10 }
|
|
|
|
dot11ProductID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The ProductID shall include, at a minimum, an identifier
|
|
that is unique to the manufacturer. It may include
|
|
additional information at the manufacturer's discretion.
|
|
The default value of this attribute shall be null."
|
|
|
|
::= { dot11OperationEntry 11 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11OperationEntry TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11Counters TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
dot11TransmittedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall be incremented for an acknowledged MPDU
|
|
with an individual address in the address 1 field or an MPDU
|
|
with a multicast address in the address 1 field of type Data
|
|
or Management."
|
|
|
|
::= { dot11CountersEntry 1 }
|
|
|
|
dot11MulticastTransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
" This counter shall increment only when the multicast bit
|
|
is set in the destination MAC address of a successfully
|
|
transmitted MSDU. When operating as a STA in an ESS, where
|
|
these frames are directed to the AP, this implies having
|
|
received an acknowledgment to all associated MPDUs. "
|
|
|
|
::= { dot11CountersEntry 2 }
|
|
|
|
dot11FailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an MSDU is not transmitted
|
|
successfully due to the number of transmit attempts exceeding
|
|
either the dot11ShortRetryLimit or dot11LongRetryLimit. "
|
|
|
|
::= { dot11CountersEntry 3 }
|
|
|
|
dot11RetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an MSDU is successfully
|
|
transmitted after one or more retransmissions."
|
|
::= { dot11CountersEntry 4 }
|
|
|
|
dot11MultipleRetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an MSDU is successfully
|
|
transmitted after more than one retransmission."
|
|
|
|
::= { dot11CountersEntry 5 }
|
|
|
|
dot11FrameDuplicateCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when a frame is received
|
|
that the Sequence Control field indicates is a
|
|
duplicate."
|
|
|
|
::= { dot11CountersEntry 6 }
|
|
|
|
dot11RTSSuccessCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when a CTS is received in
|
|
response to an RTS."
|
|
::= { dot11CountersEntry 7 }
|
|
|
|
dot11RTSFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
"This counter shall increment when a CTS is not received in
|
|
response to an RTS."
|
|
|
|
::= { dot11CountersEntry 8 }
|
|
|
|
dot11ACKFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an ACK is not received
|
|
when expected."
|
|
|
|
::= { dot11CountersEntry 9 }
|
|
|
|
dot11ReceivedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall be incremented for each successfully
|
|
received MPDU of type Data or Management."
|
|
|
|
::= { dot11CountersEntry 10 }
|
|
|
|
dot11MulticastReceivedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when a MSDU is received
|
|
with the multicast bit set in the destination
|
|
MAC address."
|
|
::= { dot11CountersEntry 11 }
|
|
|
|
dot11FCSErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an FCS error is
|
|
detected in a received MPDU."
|
|
|
|
::= { dot11CountersEntry 12 }
|
|
|
|
dot11TransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment for each successfully transmitted MSDU."
|
|
|
|
::= { dot11CountersEntry 13 }
|
|
|
|
dot11WEPUndecryptableCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when a frame is received with
|
|
the WEP subfield of the Frame Control field set to one and the
|
|
WEPOn value for the key mapped to the TA's MAC address
|
|
indicates that the frame should not have been encrypted or
|
|
that frame is discarded due to the receiving STA not
|
|
implementing the privacy option."
|
|
|
|
::= { dot11CountersEntry 14 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11CountersEntry TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * Resource Type Attribute Templates
|
|
-- **********************************************************************
|
|
dot11ResourceTypeIDName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Contains the name of the Resource Type ID managed object.
|
|
The attribute is read-write and always contains the value
|
|
RTID. This attribute value shall not be used as a naming
|
|
attribute for any other managed object class."
|
|
|
|
REFERENCE "IEEE Std 802.1F-1993, A.7"
|
|
DEFVAL {"RTID"}
|
|
::= { dot11resAttribute 1 }
|
|
|
|
-- **********************************************************************
|
|
-- * dot11ResourceInfo TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
-- REFERENCE "IEEE Std 802.1F-1993, A.7"
|
|
|
|
dot11ResourceInfoEntry OBJECT IDENTIFIER ::= { dot11resAttribute 2 }
|
|
|
|
dot11manufacturerOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Takes the value of an organizationally unique identifier.
|
|
0x00032F for D-Link, Inc."
|
|
::= { dot11ResourceInfoEntry 1 }
|
|
|
|
dot11manufacturerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A printable string used to identify the manufacturer of the
|
|
resource. Maximum string length is 128 octets.
|
|
D-Link, Inc."
|
|
::= { dot11ResourceInfoEntry 2 }
|
|
|
|
dot11manufacturerProductName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A printable string used to identify the manufacturer's product
|
|
name of the resource. Maximum string length is 128 octets."
|
|
::= { dot11ResourceInfoEntry 3 }
|
|
|
|
dot11manufacturerProductVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Printable string used to identify the manufacturer's product
|
|
version of the resource. Maximum string length is 128 octets."
|
|
::= { dot11ResourceInfoEntry 4 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11ResourceInfo TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * PHY Attribute Templates
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11PhyOperation TABLE
|
|
-- **********************************************************************
|
|
|
|
dot11PHYType OBJECT-TYPE
|
|
SYNTAX INTEGER {fhss(1), dsss(2), irbaseband(3)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This is an 8-bit integer value that identifies the PHY type
|
|
supported by the attached PLCP and PMD. Currently defined
|
|
values and their corresponding PHY types are:
|
|
|
|
FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03"
|
|
|
|
::= { dot11PhyOperationEntry 1 }
|
|
|
|
dot11CurrentRegDomain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The current regulatory domain this instance of the PMD is
|
|
supporting. This object corresponds to one of the
|
|
RegDomains listed in dot11RegDomainsSupported."
|
|
|
|
::= { dot11PhyOperationEntry 2 }
|
|
|
|
dot11TempType OBJECT-TYPE
|
|
SYNTAX INTEGER {tempType1(1), tempType2(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"There are different operating temperature requirements
|
|
dependent on the anticipated environmental conditions. This
|
|
attribute describes the current PHY's operating temperature
|
|
range capability. Currently defined values and their
|
|
corresponding temperature ranges are:
|
|
|
|
Type 1 = X'01'-Commercial range of 0 to 40 degrees C,
|
|
|
|
Type 2 = X'02'-Industrial range of -30 to 70 degrees C."
|
|
|
|
::= { dot11PhyOperationEntry 3 }
|
|
|
|
|
|
dot11RegDomainsSupportValue OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER {fcc(16), doc(32), etsi(48), spain (49), france
|
|
(50), mkk (64) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are different operational requirements dependent on
|
|
the regulatory domain. This attribute list describes the
|
|
regulatory domains the PLCP and PMD support in this
|
|
implementation. Currently de- fined values and their
|
|
corresponding Regulatory Domains are:
|
|
|
|
FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of
|
|
Europe) = X'30', Spain = X'31', France = X'32', MKK
|
|
(Japan) = X'40' "
|
|
::= { dot11PhyOperationEntry 4 }
|
|
|
|
dot11SupportedDataRatesTxValue OBJECT-TYPE
|
|
SYNTAX Integer32 (2..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The Transmit bit rates supported by the PLCP and PMD,
|
|
represented by a count from X?2-X?f, corresponding to data
|
|
rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject
|
|
to limitations of each individual PHY."
|
|
|
|
::= { dot11PhyOperationEntry 5 }
|
|
|
|
dot11SupportedDataRatesRxValue OBJECT-TYPE
|
|
SYNTAX Integer32 (2..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The receive bit rates supported by the PLCP and PMD,
|
|
represented by a count from X?2-X?f, corresponding to data
|
|
rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s."
|
|
::= { dot11PhyOperationEntry 6 }
|
|
|
|
dot11CurrentTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER (2..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current tx operating rate. corresponding to data
|
|
rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s."
|
|
|
|
::= { dot11PhyOperationEntry 7 }
|
|
|
|
dot11ChannelAgilityPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY is capable of channel agility."
|
|
|
|
::= { dot11PhyOperationEntry 8 }
|
|
|
|
dot11ChannelAgilityEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY channel agility
|
|
functionality is enabled."
|
|
|
|
::= { dot11PhyOperationEntry 9 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11PhyOperation TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11PhyAntenna TABLE
|
|
-- **********************************************************************
|
|
|
|
dot11CurrentTxAntenna OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The current antenna being used to transmit. This value
|
|
is one of the values appearing in
|
|
dot11SupportedTxAntenna. This may be used by a management agent to control which antenna is used for transmission. "
|
|
|
|
::= { dot11PhyAntennaEntry 1 }
|
|
|
|
dot11DiversitySupport OBJECT-TYPE
|
|
SYNTAX INTEGER {fixedlist(1), notsupported(2), dynamic(3)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This implementation's support for diversity, encoded as:
|
|
|
|
X'01'-diversity is available and is performed over the fixed
|
|
list of antennas defined in dot11DiversitySelectionRx.
|
|
|
|
X'02'-diversity is not supported.
|
|
|
|
X'03'-diversity is supported and control of diversity is also
|
|
available, in which case the attribute
|
|
dot11DiversitySelectionRx can be dynamically modified by the
|
|
LME."
|
|
::= { dot11PhyAntennaEntry 2 }
|
|
|
|
dot11CurrentRxAntenna OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The current antenna being used to receive, if the dot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the antennae marked for receive in the dot11AntennasListTable. "
|
|
|
|
::= { dot11PhyAntennaEntry 3 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11PhyAntenna TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11PhyTxPower TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
dot11NumberSupportedPowerLevels OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of power levels supported by the PMD.
|
|
This attribute can have a value of 1 to 8."
|
|
::= { dot11PhyTxPowerEntry 1 }
|
|
|
|
dot11TxPowerLevel1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL1 in mW.
|
|
This is also the default power level."
|
|
::= { dot11PhyTxPowerEntry 2 }
|
|
|
|
dot11TxPowerLevel2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL2 in mW."
|
|
::= { dot11PhyTxPowerEntry 3 }
|
|
|
|
dot11TxPowerLevel3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL3 in mW."
|
|
::= { dot11PhyTxPowerEntry 4 }
|
|
|
|
dot11TxPowerLevel4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL4 in mW."
|
|
::= { dot11PhyTxPowerEntry 5 }
|
|
|
|
dot11TxPowerLevel5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL5 in mW."
|
|
::= { dot11PhyTxPowerEntry 6 }
|
|
|
|
dot11TxPowerLevel6 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL6 in mW."
|
|
::= { dot11PhyTxPowerEntry 7 }
|
|
|
|
dot11TxPowerLevel7 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL7 in mW."
|
|
::= { dot11PhyTxPowerEntry 8 }
|
|
|
|
dot11TxPowerLevel8 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL8 in mW."
|
|
::= { dot11PhyTxPowerEntry 9 }
|
|
|
|
dot11CurrentTxPowerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The TxPowerLevel N currently being used to transmit data.
|
|
Some PHYs also use this value to determine the receiver
|
|
sensitivity requirements for CCA."
|
|
|
|
::= { dot11PhyTxPowerEntry 10 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11PhyTxPower TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * dot11PhyDSSSEntry TABLE
|
|
-- **********************************************************************
|
|
|
|
dot11CurrentChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..14)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operating frequency channel of the DSSS
|
|
PHY. Valid channel numbers are as defined in 15.4.6.2"
|
|
::= { dot11PhyDSSSEntry 1 }
|
|
|
|
dot11DynamicChannelEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicate dynamic channel is enabled."
|
|
::= { dot11PhyDSSSEntry 2 }
|
|
|
|
dot11CCAModeSupported OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot11CCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are:
|
|
|
|
energy detect only (ED_ONLY) = 01,
|
|
carrier sense only (CS_ONLY) = 02,
|
|
carrier sense and energy detect (ED_and_CS)= 04
|
|
|
|
or the logical sum of any of these values."
|
|
::= { dot11PhyDSSSEntry 3 }
|
|
|
|
dot11CurrentCCAMode OBJECT-TYPE
|
|
SYNTAX INTEGER {edonly(1), csonly(2), edandcs(4)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current CCA method in operation. Valid values are:
|
|
energy detect only (edonly) = 01,
|
|
carrier sense only (csonly) = 02,
|
|
carrier sense and energy detect (edandcs)= 04."
|
|
::= { dot11PhyDSSSEntry 4 }
|
|
|
|
dot11EDThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Energy Detect Threshold being used by the DSSS PHY."
|
|
::= { dot11PhyDSSSEntry 5 }
|
|
|
|
dot11ShortPreambleOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {true(1), false(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the short
|
|
preamble option as deTned in subclause 18.2.2.2 is implemented.
|
|
The default value of this attribute shall be false."
|
|
|
|
::= { dot11PhyDSSSEntry 6 }
|
|
|
|
dot11PBCCOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {true(1), false(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the PBCC modulation
|
|
option as defined in subclause 18.4.6.6 is implemented. The default
|
|
value of this attribute shall be false."
|
|
|
|
::= { dot11PhyDSSSEntry 7 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of dot11PhyDSSSEntry TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * End of 80211 MIB
|
|
-- **********************************************************************
|
|
END |