1970 lines
69 KiB
Plaintext
1970 lines
69 KiB
Plaintext
|
||
|
||
DGS3324SR-SWL3MGMT-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
Counter32,MODULE-IDENTITY,OBJECT-TYPE,IpAddress,
|
||
NOTIFICATION-TYPE, Integer32, Unsigned32
|
||
FROM SNMPv2-SMI
|
||
PhysAddress,TruthValue,DisplayString,RowStatus
|
||
FROM SNMPv2-TC
|
||
dgs3324SR FROM SW-PROJECTX-SRPRIMGMT-MIB
|
||
TOSType, Metric, AreaID, RouterID,UpToMaxAge,
|
||
HelloRange, PositiveInteger, Status, DesignatedRouterPriority
|
||
FROM OSPF-MIB
|
||
InterfaceIndex FROM IF-MIB;
|
||
|
||
swL3MgmtMIB MODULE-IDENTITY
|
||
LAST-UPDATED "0007150000Z"
|
||
ORGANIZATION " "
|
||
CONTACT-INFO
|
||
" "
|
||
DESCRIPTION
|
||
"The Structure of Layer 3 Network Management Information for the
|
||
proprietary enterprise."
|
||
::= { dgs3324SR 3 }
|
||
|
||
NodeAddress ::= OCTET STRING (SIZE(6))
|
||
NetAddress ::= OCTET STRING (SIZE(4))
|
||
|
||
swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 }
|
||
swL3IpMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 2 }
|
||
swL3RelayMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 3 }
|
||
|
||
swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 }
|
||
swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 }
|
||
-- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 }
|
||
|
||
swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 1 }
|
||
swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 }
|
||
-- ********************************************************************
|
||
|
||
swL3DevCtrl OBJECT IDENTIFIER ::= { swL3DevMgmt 1 }
|
||
|
||
swL3DevCtrlRIPState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates Routing Information Protocol (RIP)
|
||
version 2 function is enabled or disabled."
|
||
::= { swL3DevCtrl 1 }
|
||
|
||
swL3DevCtrlOSPFState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates OSPF protocol is enabled or disabled."
|
||
::= { swL3DevCtrl 2 }
|
||
|
||
swL3DevCtrlDVMRPState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates DVMRP protocol is enabled or disabled."
|
||
::= { swL3DevCtrl 3 }
|
||
|
||
|
||
swL3DevCtrlPIMState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates PIM protocol is enabled or disabled."
|
||
::= { swL3DevCtrl 4 }
|
||
|
||
swL3DevCtrlVRRPState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates VRRP protocol is enabled or disabled."
|
||
::= { swL3DevCtrl 5 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 }
|
||
-- ********************************************************************
|
||
|
||
swL3IpCtrlTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3IpCtrlEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table contain IP interface information."
|
||
::= { swL3IpCtrlMgmt 1 }
|
||
|
||
swL3IpCtrlEntry OBJECT-TYPE
|
||
SYNTAX SwL3IpCtrlEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information about a specific IP interface."
|
||
INDEX { swL3IpCtrlIpAddr }
|
||
::= { swL3IpCtrlTable 1 }
|
||
|
||
SwL3IpCtrlEntry ::=
|
||
SEQUENCE {
|
||
swL3IpCtrlIpAddr
|
||
IpAddress,
|
||
swL3IpCtrlIfIndex
|
||
INTEGER,
|
||
swL3IpCtrlInterfaceName
|
||
DisplayString,
|
||
swL3IpCtrlIpSubnetMask
|
||
IpAddress,
|
||
swL3IpCtrlVlanName
|
||
DisplayString,
|
||
swL3IpCtrlMode
|
||
INTEGER,
|
||
swL3IpCtrlSecondary
|
||
TruthValue,
|
||
swL3IpCtrlState
|
||
RowStatus,
|
||
swL3IpCtrlOperState
|
||
INTEGER
|
||
}
|
||
|
||
swL3IpCtrlIpAddr OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP address of the interface. This object only can take the
|
||
value of the unicast IP address."
|
||
::= { swL3IpCtrlEntry 1 }
|
||
|
||
swL3IpCtrlIfIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object uniquely identifies the IP interface number in the
|
||
swL3IpCtrlTable."
|
||
::= { swL3IpCtrlEntry 2 }
|
||
|
||
swL3IpCtrlInterfaceName OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE (1..12))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the name of the IP interface."
|
||
::= { swL3IpCtrlEntry 3 }
|
||
|
||
swL3IpCtrlIpSubnetMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP net mask for this interface."
|
||
::= { swL3IpCtrlEntry 4 }
|
||
|
||
swL3IpCtrlVlanName OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE (0..32))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the IP control entry's VLAN name. The
|
||
VLAN name in each entry must be unique in the IP Control Table."
|
||
::= { swL3IpCtrlEntry 5 }
|
||
|
||
swL3IpCtrlMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
manual(2),
|
||
bootp(3),
|
||
dhcp(4)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the IP operation mode.
|
||
|
||
other(1) - this entry is currently in use but the conditions
|
||
under which it will remain so are different from each of the
|
||
following values.
|
||
manual(2) - the IP address will be set by manual.
|
||
bootp(3) - the IP address will be set automatically from BOOTP
|
||
server.
|
||
dhcp(4) - the IP address will be set automatically from DHCP
|
||
server."
|
||
::= { swL3IpCtrlEntry 6 }
|
||
|
||
swL3IpCtrlSecondary OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"When this is true(1) the IP address is the secondary IP. When
|
||
false(2), the IP address is the primary IP."
|
||
::= { swL3IpCtrlEntry 7 }
|
||
|
||
swL3IpCtrlState OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This variable displays the status of the entry. The status used
|
||
for creating, modifying, and deleting instances of the objects
|
||
in this table."
|
||
::= { swL3IpCtrlEntry 8 }
|
||
|
||
swL3IpCtrlOperState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
up(2),
|
||
down(3)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The current operational state of the IP interface."
|
||
::= { swL3IpCtrlEntry 9 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 }
|
||
-- ********************************************************************
|
||
|
||
swL3IpFdbInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3IpFdbInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A table that contains forwarding and/or filtering information.
|
||
This information is used by the switch in determining how to
|
||
propagate the received IP packets."
|
||
::= { swL3IpFdbMgmt 1 }
|
||
|
||
swL3IpFdbInfoEntry OBJECT-TYPE
|
||
SYNTAX SwL3IpFdbInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Information about a specific IP address for which the bridge
|
||
has some forwarding and/or filtering information."
|
||
INDEX { swL3IpFdbInfoIpAddr }
|
||
::= { swL3IpFdbInfoTable 1 }
|
||
|
||
SwL3IpFdbInfoEntry ::=
|
||
SEQUENCE {
|
||
-- swL3IpFdbInfoRdIndex
|
||
-- INTEGER,
|
||
swL3IpFdbInfoIpAddr
|
||
IpAddress,
|
||
swL3IpFdbInfoIpSubnetMask
|
||
IpAddress,
|
||
swL3IpFdbInfoPort
|
||
INTEGER,
|
||
swL3IpFdbInfoType
|
||
INTEGER
|
||
}
|
||
|
||
-- swL3IpFdbInfoRdIndex OBJECT-TYPE
|
||
-- SYNTAX INTEGER(0..65535)
|
||
-- MAX-ACCESS read-only
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "The object indicates the IP routing domain index, and should
|
||
-- be associated with one of swL3IpDomainStatsIndex."
|
||
-- ::= { swL3IpFdbInfoEntry 1 }
|
||
|
||
swL3IpFdbInfoIpAddr OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A IP address for which switch has forwarding and/or filtering
|
||
information."
|
||
::= { swL3IpFdbInfoEntry 1 }
|
||
|
||
swL3IpFdbInfoIpSubnetMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A IP net mask for this interface.for which switch has
|
||
forwarding and/or filtering information."
|
||
::= { swL3IpFdbInfoEntry 2 }
|
||
|
||
swL3IpFdbInfoPort OBJECT-TYPE
|
||
SYNTAX INTEGER(0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Either the value '0', or the port number of the port on which
|
||
packet having a IP address equal to the value of the
|
||
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
|
||
value of '0' indicates that the port number has not been learned
|
||
but that switch does have some forwarding/filtering information
|
||
about this address."
|
||
::= { swL3IpFdbInfoEntry 3 }
|
||
|
||
swL3IpFdbInfoType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
static(2),
|
||
dynamic(3)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The status of this entry."
|
||
::= { swL3IpFdbInfoEntry 4 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 }
|
||
-- ********************************************************************
|
||
|
||
-- swL3IpFilterAddrConfig OBJECT IDENTIFIER ::= { swL3IpFilterMgmt 1 }
|
||
|
||
-- swL3IpFilterAddrMaxSupportedEntries OBJECT-TYPE
|
||
-- SYNTAX INTEGER(0..65535)
|
||
-- MAX-ACCESS read-only
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "Maximum number of entries in the IP address filtering table
|
||
-- (swL3IpFilterAddrCtrlTable) ."
|
||
-- ::= { swL3IpFilterAddrConfig 1 }
|
||
|
||
-- swL3IpFilterAddrCurrentTotalEntries OBJECT-TYPE
|
||
-- SYNTAX INTEGER(0..65535)
|
||
-- MAX-ACCESS read-only
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "Current applied number of entries in the IP address filtering
|
||
-- table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it
|
||
-- means there are two entries in swL3IpFilterAddrCtrlTable."
|
||
-- ::= { swL3IpFilterAddrConfig 2 }
|
||
|
||
-- swL3IpFilterAddrCtrlTable OBJECT-TYPE
|
||
-- SYNTAX SEQUENCE OF SwL3IpFilterAddrCtrlEntry
|
||
-- MAX-ACCESS not-accessible
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "This table defines information for the device to filter packets
|
||
-- with specific IP address (either as the DA and/or as the SA).
|
||
-- The IP address can be a unicast address or multicast address.
|
||
-- This table has higher priority than both static FDB table and
|
||
-- IGMP table. It means that if a IP address appears on this table
|
||
-- also appears on the static FDB table, the device will use the
|
||
-- information provide by this table to process the packet."
|
||
-- ::= { swL3IpFilterAddrConfig 3 }
|
||
|
||
-- swL3IpFilterAddrCtrlEntry OBJECT-TYPE
|
||
-- SYNTAX SwL3IpFilterAddrCtrlEntry
|
||
-- MAX-ACCESS not-accessible
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "A list of information about a specific unicast/multicast IP
|
||
-- address for which the switch has filtering information."
|
||
-- INDEX { swL3IpFilterAddrIpAddr }
|
||
-- ::= { swL3IpFilterAddrCtrlTable 1 }
|
||
|
||
-- SwL3IpFilterAddrCtrlEntry ::=
|
||
-- SEQUENCE {
|
||
-- swL3IpFilterAddrIpAddr
|
||
-- IpAddress,
|
||
-- swL3IpFilterAddrIpSktGE
|
||
-- INTEGER,
|
||
-- swL3IpFilterAddrIpSktLE
|
||
-- INTEGER,
|
||
-- swL3IpFilterAddrCtrlState
|
||
-- INTEGER
|
||
-- }
|
||
|
||
-- swL3IpFilterAddrIpAddr OBJECT-TYPE
|
||
-- SYNTAX IpAddress
|
||
-- MAX-ACCESS read-only
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "This object indicates a unicast/multicast IP address for which
|
||
-- the switch has filtering information. But if the
|
||
-- swL3IpFilterAddrCtrlState = src-addr, then the object can not be
|
||
-- a multicast IP address (Class D IP address)."
|
||
-- ::= { swL3IpFilterAddrCtrlEntry 1 }
|
||
|
||
-- swL3IpFilterAddrIpSktGE OBJECT-TYPE
|
||
-- SYNTAX INTEGER
|
||
-- MAX-ACCESS read-write
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "This object indicates a socket number which the used socket
|
||
-- number should be greater than or equal to"
|
||
-- ::= { swL3IpFilterAddrCtrlEntry 2 }
|
||
|
||
-- swL3IpFilterAddrIpSktLE OBJECT-TYPE
|
||
-- SYNTAX INTEGER
|
||
-- MAX-ACCESS read-write
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "This object indicates a socket number which the used socket
|
||
-- number should be less than or equal to"
|
||
-- ::= { swL3IpFilterAddrCtrlEntry 3 }
|
||
|
||
-- swL3IpFilterAddrCtrlState OBJECT-TYPE
|
||
-- SYNTAX INTEGER {
|
||
-- other(1),
|
||
-- dst-addr(2),
|
||
-- src-addr(3),
|
||
-- dst-src-addr(4),
|
||
-- invalid(5)
|
||
-- }
|
||
-- MAX-ACCESS read-write
|
||
-- STATUS current
|
||
-- DESCRIPTION
|
||
-- "This object indicates the status of this entry.
|
||
|
||
-- other(1) - this entry is currently in use but the conditions
|
||
-- under which it will remain so are different from each of the
|
||
-- following values.
|
||
-- dst-addr(2) - recieved frames's destination address are
|
||
-- currently used to be filtered as it meets with the IP
|
||
-- address entry of the table.
|
||
-- src-addr(3) - recieved frames's source address are currently
|
||
-- used to be filtered as it meets with the IP address entry of
|
||
-- the table.
|
||
-- dst-src-addr(4) - recieved frames's destination address or
|
||
-- source address are currently used to be filtered as it meets
|
||
-- with the IP address entry of the table.
|
||
-- invalid(5) - writing this value to the object, and then the
|
||
-- corresponding entry will be removed from the table."
|
||
-- ::= { swL3IpFilterAddrCtrlEntry 2 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3IpArpAgingTime OBJECT IDENTIFIER ::= { swL3IpMgmt 4 }
|
||
-- ********************************************************************
|
||
|
||
swL3IpArpAgingTime OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The timeout period in minutes for aging out dynamically learned
|
||
arp information."
|
||
::= { swL3IpMgmt 4 }
|
||
|
||
|
||
swL3IpStaticRouteTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3IpStaticRouteEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This entity's IP static Routing table."
|
||
::= { swL3IpMgmt 5 }
|
||
|
||
swL3IpStaticRouteEntry OBJECT-TYPE
|
||
SYNTAX SwL3IpStaticRouteEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A particular route to a particular destination, under a particular policy.
|
||
Once an entry be built,it shouldn't be modified.That is,it just support create and
|
||
delete action."
|
||
INDEX {
|
||
swL3IpStaticRouteDest,
|
||
swL3IpStaticRouteMask,
|
||
swL3IpStaticRouteBkupState
|
||
}
|
||
::= { swL3IpStaticRouteTable 1 }
|
||
|
||
SwL3IpStaticRouteEntry ::=
|
||
SEQUENCE {
|
||
swL3IpStaticRouteDest
|
||
IpAddress,
|
||
swL3IpStaticRouteMask
|
||
IpAddress,
|
||
swL3IpStaticRouteBkupState
|
||
INTEGER,
|
||
swL3IpStaticRouteNextHop
|
||
IpAddress,
|
||
swL3IpStaticRouteMetric
|
||
INTEGER,
|
||
swL3IpStaticRouteStatus
|
||
INTEGER
|
||
}
|
||
|
||
swL3IpStaticRouteDest OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The destination IP address of this route.
|
||
|
||
This object may not take a Multicast (Class D)
|
||
address value.
|
||
|
||
Any assignment (implicit or otherwise) of an
|
||
instance of this object to a value x must be
|
||
rejected if the bitwise logical-AND of x with
|
||
the value of the corresponding instance of the
|
||
swL3IpStaticRouteMask object is not equal to x."
|
||
::= { swL3IpStaticRouteEntry 1 }
|
||
|
||
swL3IpStaticRouteMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Indicate the mask to be logical-ANDed with the
|
||
destination address before being compared to
|
||
the value in the swL3IpStaticRouteDest field.
|
||
For those systems that do not support arbitrary
|
||
subnet masks, an agent constructs the value of
|
||
the swL3IpStaticRouteMask by reference to the IP
|
||
Address Class.
|
||
|
||
Any assignment (implicit or otherwise) of an
|
||
instance of this object to a value x must be
|
||
rejected if the bitwise logical-AND of x with
|
||
the value of the corresponding instance of the
|
||
swL3IpStaticRouteDest object is not equal to
|
||
swL3IpStaticRouteDest."
|
||
::= { swL3IpStaticRouteEntry 2 }
|
||
|
||
swL3IpStaticRouteBkupState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
primary(1),
|
||
backup(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The routing state for this route.The value SHOULD be
|
||
primary(1) or backup(2)."
|
||
::= { swL3IpStaticRouteEntry 3 }
|
||
|
||
swL3IpStaticRouteNextHop OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"On remote routes, the address of the next sys-
|
||
tem en route; Otherwise, 0.0.0.0."
|
||
::= { swL3IpStaticRouteEntry 4 }
|
||
|
||
swL3IpStaticRouteMetric OBJECT-TYPE
|
||
SYNTAX INTEGER (1..65535)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The routing metric for this route."
|
||
::= { swL3IpStaticRouteEntry 5 }
|
||
|
||
swL3IpStaticRouteStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
invalid(2),
|
||
valid(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the status of this entry.
|
||
|
||
other(1) - this entry is currently in use but the conditions
|
||
under which it will remain so are different from each of
|
||
the following values.
|
||
invalid(2) - writing this value to the object, and then the
|
||
corresponding entry will be removed from the table.
|
||
valid(3) - this entry is reside in the table."
|
||
::= { swL3IpStaticRouteEntry 6 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 1 }
|
||
-- ********************************************************************
|
||
|
||
swL3RelayBootpState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates BOOTP Relay function is enabled or
|
||
disabled."
|
||
::= { swL3RelayBootpMgmt 1 }
|
||
|
||
swL3RelayBootpHopCount OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the maximum number of router hops that
|
||
the BOOTP packets can cross."
|
||
::= { swL3RelayBootpMgmt 2 }
|
||
|
||
swL3RelayBootpTimeThreshold OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the minimum time in seconds within which
|
||
the switch must relay the BOOTP request. If this time is
|
||
exceeded, the switch will drop the BOOTP packet."
|
||
::= { swL3RelayBootpMgmt 3 }
|
||
|
||
swL3RelayBootpCtrlTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3RelayBootpCtrlEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table specifys the IP address as a destination to forward
|
||
(relay) BOOTP packets to."
|
||
::= { swL3RelayBootpMgmt 4 }
|
||
|
||
swL3RelayBootpCtrlEntry OBJECT-TYPE
|
||
SYNTAX SwL3RelayBootpCtrlEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information specifies the IP address as a destination
|
||
to forward (relay) BOOTP packets to."
|
||
INDEX { swL3RelayBootpCtrlInterfaceName, swL3RelayBootpCtrlServer}
|
||
::= { swL3RelayBootpCtrlTable 1 }
|
||
|
||
SwL3RelayBootpCtrlEntry ::=
|
||
SEQUENCE {
|
||
swL3RelayBootpCtrlInterfaceName
|
||
DisplayString,
|
||
swL3RelayBootpCtrlServer
|
||
IpAddress,
|
||
swL3RelayBootpCtrlState
|
||
INTEGER
|
||
}
|
||
|
||
swL3RelayBootpCtrlInterfaceName OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE(0..12))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of the IP interface."
|
||
::= { swL3RelayBootpCtrlEntry 1 }
|
||
|
||
swL3RelayBootpCtrlServer OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The BOOTP server IP address."
|
||
::= { swL3RelayBootpCtrlEntry 2 }
|
||
|
||
swL3RelayBootpCtrlState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
invalid(2),
|
||
valid(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the status of this entry.
|
||
|
||
other(1) - this entry is currently in use but the conditions
|
||
under which it will remain so are different from each of
|
||
the following values.
|
||
invalid(2) - writing this value to the object, and then the
|
||
corresponding entry will be removed from the table.
|
||
valid(3) - this entry is reside in the table."
|
||
::= { swL3RelayBootpCtrlEntry 3 }
|
||
|
||
|
||
-- ********************************************************************
|
||
-- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 }
|
||
-- ********************************************************************
|
||
|
||
swL3RelayDnsState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates DNS Relay function is enabled or
|
||
disabled."
|
||
::= { swL3RelayDnsMgmt 1 }
|
||
|
||
swL3RelayDnsPrimaryServer OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the address of the primary DNS server."
|
||
::= { swL3RelayDnsMgmt 2 }
|
||
|
||
swL3RelayDnsSecondaryServer OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the address of the secondary DNS server."
|
||
::= { swL3RelayDnsMgmt 3 }
|
||
|
||
swL3RelayDnsCacheState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates DNS Relay cache is enabled or
|
||
disabled."
|
||
::= { swL3RelayDnsMgmt 4 }
|
||
|
||
swL3RelayDnsStaticTableState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
disabled(2),
|
||
enabled(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates DNS Relay static table is enabled or
|
||
disabled."
|
||
::= { swL3RelayDnsMgmt 5 }
|
||
|
||
swL3RelayDnsCtrlTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3RelayDnsCtrlEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table display the current DNS relay static table."
|
||
::= { swL3RelayDnsMgmt 6 }
|
||
|
||
swL3RelayDnsCtrlEntry OBJECT-TYPE
|
||
SYNTAX SwL3RelayDnsCtrlEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information display the current DNS relay static
|
||
table."
|
||
INDEX { swL3RelayDnsCtrlDomainName, swL3RelayDnsCtrlIpAddr}
|
||
::= { swL3RelayDnsCtrlTable 1 }
|
||
|
||
SwL3RelayDnsCtrlEntry ::=
|
||
SEQUENCE {
|
||
swL3RelayDnsCtrlDomainName
|
||
DisplayString,
|
||
swL3RelayDnsCtrlIpAddr
|
||
IpAddress,
|
||
swL3RelayDnsCtrlState
|
||
INTEGER
|
||
}
|
||
|
||
swL3RelayDnsCtrlDomainName OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE(1..32))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The domain name of the entry."
|
||
::= { swL3RelayDnsCtrlEntry 1 }
|
||
|
||
swL3RelayDnsCtrlIpAddr OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP address of the entry."
|
||
::= { swL3RelayDnsCtrlEntry 2 }
|
||
|
||
swL3RelayDnsCtrlState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
invalid(2),
|
||
valid(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the status of this entry.
|
||
|
||
other(1) - this entry is currently in use but the conditions
|
||
under which it will remain so are different from each of
|
||
the following values.
|
||
invalid(2) - writing this value to the object, and then the
|
||
corresponding entry will be removed from the table.
|
||
valid(3) - this entry is reside in the table."
|
||
::= { swL3RelayDnsCtrlEntry 3 }
|
||
|
||
|
||
-- ********************************************************************
|
||
-- swL3Md5Table OBJECT IDENTIFIER ::= { swL3MgmtMIB 4 }
|
||
-- ********************************************************************
|
||
|
||
swL3Md5Table OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3Md5Entry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table display the current MD5 key table."
|
||
::= { swL3MgmtMIB 4 }
|
||
|
||
swL3Md5Entry OBJECT-TYPE
|
||
SYNTAX SwL3Md5Entry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information display the current MD5 key table."
|
||
INDEX { swL3Md5KeyId}
|
||
::= { swL3Md5Table 1 }
|
||
|
||
SwL3Md5Entry ::=
|
||
SEQUENCE {
|
||
swL3Md5KeyId
|
||
INTEGER,
|
||
swL3Md5Key
|
||
DisplayString,
|
||
swL3Md5RowStatus
|
||
RowStatus
|
||
}
|
||
|
||
swL3Md5KeyId OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The MD5 key ID."
|
||
::= { swL3Md5Entry 1 }
|
||
|
||
swL3Md5Key OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE(1..16))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An MD5 password of up to 16 bytes."
|
||
::= { swL3Md5Entry 2 }
|
||
|
||
swL3Md5RowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the status of this entry."
|
||
::= { swL3Md5Entry 3 }
|
||
|
||
|
||
-- ********************************************************************
|
||
-- swL3RouteRedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 5 }
|
||
-- ********************************************************************
|
||
|
||
swL3RouteRedistriTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3RouteRedistriEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Route redistribution allows routers on the network. That are
|
||
running different routing protocols to exchange routing
|
||
information. This is accomplished by comparing the routes stored
|
||
in the vairous router<65><72>s routing tables and assinging appropriate
|
||
metrics. This information is then exchanged among the various
|
||
routers according to the individual routers current routing
|
||
protocol."
|
||
::= { swL3MgmtMIB 5 }
|
||
|
||
swL3RouteRedistriEntry OBJECT-TYPE
|
||
SYNTAX SwL3RouteRedistriEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information display the route redistribution table."
|
||
INDEX { swL3RouteRedistriSrcProtocol, swL3RouteRedistriDstProtocol}
|
||
::= { swL3RouteRedistriTable 1 }
|
||
|
||
SwL3RouteRedistriEntry ::=
|
||
SEQUENCE {
|
||
swL3RouteRedistriSrcProtocol
|
||
INTEGER,
|
||
swL3RouteRedistriDstProtocol
|
||
INTEGER,
|
||
swL3RouteRedistriType
|
||
INTEGER,
|
||
swL3RouteRedistriMetric
|
||
INTEGER,
|
||
swL3RouteRedistriRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
swL3RouteRedistriSrcProtocol OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
rip(2),
|
||
ospf(3),
|
||
static(4),
|
||
local(5)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Allows the selection of the protocol of the source device."
|
||
::= { swL3RouteRedistriEntry 1 }
|
||
|
||
swL3RouteRedistriDstProtocol OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
rip(2),
|
||
ospf(3)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Allows the selection of the protocol of the destination device."
|
||
::= { swL3RouteRedistriEntry 2 }
|
||
|
||
swL3RouteRedistriType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1),
|
||
all(2),
|
||
type-1(3),
|
||
type-2(4),
|
||
internal(5),
|
||
external(6),
|
||
inter-E1(7),
|
||
inter-E2(8),
|
||
extType1(9),
|
||
extType2(10)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Allows the selection of one of the methods for calcalculating
|
||
the metric value."
|
||
::= { swL3RouteRedistriEntry 3 }
|
||
|
||
swL3RouteRedistriMetric OBJECT-TYPE
|
||
SYNTAX INTEGER (0..16777214)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Allows the entry of an OSPF interface cost. This is analogous
|
||
to a Hop Count in the RIP routing protocol. The value '0'
|
||
indicates default value."
|
||
::= { swL3RouteRedistriEntry 4 }
|
||
|
||
swL3RouteRedistriRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the status of this entry."
|
||
::= { swL3RouteRedistriEntry 5 }
|
||
|
||
|
||
-- ********************************************************************
|
||
-- swL3OspfHostTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 6 }
|
||
-- ********************************************************************
|
||
|
||
swL3OspfHostTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3OspfHostEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The list of Hosts, and their metrics, that the router will
|
||
advertise as host routes."
|
||
::= { swL3MgmtMIB 6 }
|
||
|
||
swL3OspfHostEntry OBJECT-TYPE
|
||
SYNTAX SwL3OspfHostEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A metric to be advertised, for a given type of service, when a
|
||
given host is reachable."
|
||
INDEX { swL3OspfHostIpAddress, swL3OspfHostTOS }
|
||
::= { swL3OspfHostTable 1 }
|
||
|
||
SwL3OspfHostEntry ::=
|
||
SEQUENCE {
|
||
swL3OspfHostIpAddress
|
||
IpAddress,
|
||
swL3OspfHostTOS
|
||
TOSType,
|
||
swL3OspfHostMetric
|
||
Metric,
|
||
swL3OspfHostAreaID
|
||
AreaID,
|
||
swL3OspfHostStatus
|
||
RowStatus
|
||
}
|
||
|
||
swL3OspfHostIpAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP Address of the Host."
|
||
::= { swL3OspfHostEntry 1 }
|
||
|
||
swL3OspfHostTOS OBJECT-TYPE
|
||
SYNTAX TOSType
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Type of Service of the route being configured."
|
||
::= { swL3OspfHostEntry 2 }
|
||
|
||
swL3OspfHostMetric OBJECT-TYPE
|
||
SYNTAX Metric
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Metric to be advertised."
|
||
::= { swL3OspfHostEntry 3 }
|
||
|
||
swL3OspfHostAreaID OBJECT-TYPE
|
||
SYNTAX AreaID
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Area the Host Entry is to be found within. By default, the
|
||
area that a subsuming OSPF interface is in, or 0.0.0.0"
|
||
::= { swL3OspfHostEntry 4 }
|
||
|
||
swL3OspfHostStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This variable displays the status of the entry. Setting it to
|
||
'invalid' has the effect of rendering it inoperative. The internal
|
||
effect (row removal) is implementation dependent."
|
||
::= { swL3OspfHostEntry 5 }
|
||
|
||
-- ********************************************************************
|
||
-- swL3ospfVirtIfTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 7 }
|
||
-- ********************************************************************
|
||
-- OSPF Virtual Interface Table(from rfc1850,modify by Scott Sung)
|
||
|
||
-- The Virtual Interface Table describes the virtual
|
||
-- links that the OSPF Process is configured to
|
||
-- carry on.
|
||
|
||
swL3ospfVirtIfTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3OspfVirtIfEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Information about this router's virtual inter-
|
||
faces."
|
||
REFERENCE
|
||
"OSPF Version 2, Appendix C.4 Virtual link
|
||
parameters"
|
||
::= { swL3MgmtMIB 7 }
|
||
|
||
swL3ospfVirtIfEntry OBJECT-TYPE
|
||
SYNTAX SwL3OspfVirtIfEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Information about a single Virtual Interface."
|
||
INDEX { swL3ospfVirtIfAreaId, swL3ospfVirtIfNeighbor }
|
||
::= { swL3ospfVirtIfTable 1 }
|
||
|
||
SwL3OspfVirtIfEntry ::=
|
||
SEQUENCE {
|
||
swL3ospfVirtIfAreaId
|
||
AreaID,
|
||
swL3ospfVirtIfNeighbor
|
||
RouterID,
|
||
swL3ospfVirtIfTransitDelay
|
||
UpToMaxAge,
|
||
swL3ospfVirtIfRetransInterval
|
||
UpToMaxAge,
|
||
swL3ospfVirtIfHelloInterval
|
||
HelloRange,
|
||
swL3ospfVirtIfRtrDeadInterval
|
||
PositiveInteger,
|
||
swL3ospfVirtIfState
|
||
INTEGER,
|
||
swL3ospfVirtIfEvents
|
||
Counter32,
|
||
swL3ospfVirtIfAuthType
|
||
INTEGER,
|
||
swL3ospfVirtIfAuthKey
|
||
OCTET STRING,
|
||
swL3ospfVirtIfAuthKeyID
|
||
INTEGER,
|
||
swL3ospfVirtIfStatus
|
||
RowStatus
|
||
}
|
||
|
||
swL3ospfVirtIfAreaId OBJECT-TYPE
|
||
SYNTAX AreaID
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Transit Area that the Virtual Link
|
||
traverses. By definition, this is not 0.0.0.0"
|
||
::= { swL3ospfVirtIfEntry 1 }
|
||
|
||
swL3ospfVirtIfNeighbor OBJECT-TYPE
|
||
SYNTAX RouterID
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Router ID of the Virtual Neighbor."
|
||
::= { swL3ospfVirtIfEntry 2 }
|
||
|
||
swL3ospfVirtIfTransitDelay OBJECT-TYPE
|
||
SYNTAX UpToMaxAge
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The estimated number of seconds it takes to
|
||
transmit a link- state update packet over this
|
||
interface."
|
||
DEFVAL { 1 }
|
||
::= { swL3ospfVirtIfEntry 3 }
|
||
|
||
swL3ospfVirtIfRetransInterval OBJECT-TYPE
|
||
SYNTAX UpToMaxAge
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of seconds between link-state ad-
|
||
vertisement retransmissions, for adjacencies
|
||
belonging to this interface. This value is
|
||
also used when retransmitting database descrip-
|
||
tion and link-state request packets. This
|
||
value should be well over the expected round-
|
||
trip time."
|
||
DEFVAL { 5 }
|
||
::= { swL3ospfVirtIfEntry 4 }
|
||
|
||
swL3ospfVirtIfHelloInterval OBJECT-TYPE
|
||
SYNTAX HelloRange
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The length of time, in seconds, between the
|
||
Hello packets that the router sends on the in-
|
||
terface. This value must be the same for the
|
||
virtual neighbor."
|
||
DEFVAL { 10 }
|
||
::= { swL3ospfVirtIfEntry 5 }
|
||
|
||
swL3ospfVirtIfRtrDeadInterval OBJECT-TYPE
|
||
SYNTAX PositiveInteger
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of seconds that a router's Hello
|
||
packets have not been seen before it's neigh-
|
||
bors declare the router down. This should be
|
||
some multiple of the Hello interval. This
|
||
value must be the same for the virtual neigh-
|
||
bor."
|
||
DEFVAL { 60 }
|
||
::= { swL3ospfVirtIfEntry 6 }
|
||
|
||
swL3ospfVirtIfState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
down (1), -- these use the same encoding
|
||
pointToPoint (4) -- as the ospfIfTable
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"OSPF virtual interface states."
|
||
DEFVAL { down }
|
||
::= { swL3ospfVirtIfEntry 7 }
|
||
|
||
swL3ospfVirtIfEvents OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of state changes or error events on
|
||
this Virtual Link"
|
||
::= { swL3ospfVirtIfEntry 8 }
|
||
|
||
swL3ospfVirtIfAuthType OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
-- none (0),
|
||
-- simplePassword (1)
|
||
-- md5 (2)
|
||
-- reserved for specification by IANA (> 2)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The authentication type specified for a virtu-
|
||
al interface. Additional authentication types
|
||
may be assigned locally."
|
||
REFERENCE
|
||
"OSPF Version 2, Appendix E Authentication"
|
||
DEFVAL { 0 } -- no authentication, by default
|
||
::= { swL3ospfVirtIfEntry 9 }
|
||
|
||
swL3ospfVirtIfAuthKey OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..256))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"If Authentication Type is simplePassword, the
|
||
device will left adjust and zero fill to 8 oc-
|
||
tets.
|
||
|
||
Note that unauthenticated interfaces need no
|
||
authentication key, and simple password authen-
|
||
tication cannot use a key of more than 8 oc-
|
||
tets. Larger keys are useful only with authen-
|
||
tication mechanisms not specified in this docu-
|
||
ment."
|
||
REFERENCE
|
||
"OSPF Version 2, Section 9 The Interface Data
|
||
Structure"
|
||
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
||
::= { swL3ospfVirtIfEntry 10 }
|
||
|
||
swL3ospfVirtIfAuthKeyID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The MD5 key ID."
|
||
::= { swL3ospfVirtIfEntry 11 }
|
||
|
||
swL3ospfVirtIfStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This variable displays the status of the en-
|
||
try. Setting it to 'invalid' has the effect of
|
||
rendering it inoperative. The internal effect
|
||
(row removal) is implementation dependent."
|
||
::= { swL3ospfVirtIfEntry 12 }
|
||
|
||
-- OSPF Interface Table
|
||
|
||
-- The OSPF Interface Table augments the ipAddrTable
|
||
-- with OSPF specific information.
|
||
|
||
swL3ospfIfTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3OspfIfEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The OSPF Interface Table describes the inter-
|
||
faces from the viewpoint of OSPF."
|
||
REFERENCE
|
||
"OSPF Version 2, Appendix C.3 Router interface
|
||
parameters"
|
||
::= { swL3MgmtMIB 8 }
|
||
|
||
swL3ospfIfEntry OBJECT-TYPE
|
||
SYNTAX SwL3OspfIfEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The OSPF Interface Entry describes one inter-
|
||
face from the viewpoint of OSPF."
|
||
INDEX { swL3ospfIfIpAddress, swL3ospfAddressLessIf }
|
||
::= { swL3ospfIfTable 1 }
|
||
|
||
SwL3OspfIfEntry ::=
|
||
SEQUENCE {
|
||
swL3ospfIfIpAddress
|
||
IpAddress,
|
||
swL3ospfAddressLessIf
|
||
Integer32,
|
||
swL3ospfIfAreaId
|
||
AreaID,
|
||
swL3ospfIfType
|
||
INTEGER,
|
||
swL3ospfIfAdminStat
|
||
Status,
|
||
swL3ospfIfRtrPriority
|
||
DesignatedRouterPriority,
|
||
swL3ospfIfTransitDelay
|
||
UpToMaxAge,
|
||
swL3ospfIfRetransInterval
|
||
UpToMaxAge,
|
||
swL3ospfIfHelloInterval
|
||
HelloRange,
|
||
swL3ospfIfRtrDeadInterval
|
||
PositiveInteger,
|
||
swL3ospfIfPollInterval
|
||
PositiveInteger,
|
||
swL3ospfIfState
|
||
INTEGER,
|
||
swL3ospfIfDesignatedRouter
|
||
IpAddress,
|
||
swL3ospfIfBackupDesignatedRouter
|
||
IpAddress,
|
||
swL3ospfIfEvents
|
||
Counter32,
|
||
swL3ospfIfMulticastForwarding
|
||
INTEGER,
|
||
swL3ospfIfDemand
|
||
TruthValue,
|
||
swL3ospfIfAuthType
|
||
INTEGER,
|
||
swL3ospfIfAuthKey
|
||
OCTET STRING,
|
||
swL3ospfIfAuthKeyID
|
||
INTEGER,
|
||
swL3ospfIfStatus
|
||
RowStatus
|
||
}
|
||
|
||
swL3ospfIfIpAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP address of this OSPF interface."
|
||
::= { swL3ospfIfEntry 1 }
|
||
|
||
swL3ospfAddressLessIf OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"For the purpose of easing the instancing of
|
||
addressed and addressless interfaces; This
|
||
variable takes the value 0 on interfaces with
|
||
IP Addresses, and the corresponding value of
|
||
ifIndex for interfaces having no IP Address."
|
||
::= { swL3ospfIfEntry 2 }
|
||
|
||
swL3ospfIfAreaId OBJECT-TYPE
|
||
SYNTAX AreaID
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A 32-bit integer uniquely identifying the area
|
||
to which the interface connects. Area ID
|
||
0.0.0.0 is used for the OSPF backbone."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { swL3ospfIfEntry 3 }
|
||
|
||
swL3ospfIfType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
broadcast (1),
|
||
nbma (2),
|
||
pointToPoint (3),
|
||
pointToMultipoint (5)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The OSPF interface type.
|
||
|
||
By way of a default, this field may be intuited
|
||
from the corresponding value of ifType. Broad-
|
||
cast LANs, such as Ethernet and IEEE 802.5,
|
||
take the value 'broadcast', X.25 and similar
|
||
technologies take the value 'nbma', and links
|
||
that are definitively point to point take the
|
||
value 'pointToPoint'."
|
||
::= { swL3ospfIfEntry 4 }
|
||
|
||
swL3ospfIfAdminStat OBJECT-TYPE
|
||
SYNTAX Status
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The OSPF interface's administrative status.
|
||
The value formed on the interface, and the in-
|
||
terface will be advertised as an internal route
|
||
to some area. The value 'disabled' denotes
|
||
that the interface is external to OSPF."
|
||
DEFVAL { enabled }
|
||
::= { swL3ospfIfEntry 5 }
|
||
|
||
swL3ospfIfRtrPriority OBJECT-TYPE
|
||
SYNTAX DesignatedRouterPriority
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The priority of this interface. Used in
|
||
multi-access networks, this field is used in
|
||
the designated router election algorithm. The
|
||
value 0 signifies that the router is not eligi-
|
||
ble to become the designated router on this
|
||
particular network. In the event of a tie in
|
||
this value, routers will use their Router ID as
|
||
a tie breaker."
|
||
DEFVAL { 1 }
|
||
::= { swL3ospfIfEntry 6 }
|
||
|
||
swL3ospfIfTransitDelay OBJECT-TYPE
|
||
SYNTAX UpToMaxAge
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The estimated number of seconds it takes to
|
||
transmit a link state update packet over this
|
||
interface."
|
||
DEFVAL { 1 }
|
||
::= { swL3ospfIfEntry 7 }
|
||
|
||
swL3ospfIfRetransInterval OBJECT-TYPE
|
||
SYNTAX UpToMaxAge
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of seconds between link-state ad-
|
||
vertisement retransmissions, for adjacencies
|
||
belonging to this interface. This value is
|
||
also used when retransmitting database descrip-
|
||
tion and link-state request packets."
|
||
DEFVAL { 5 }
|
||
::= { swL3ospfIfEntry 8 }
|
||
|
||
swL3ospfIfHelloInterval OBJECT-TYPE
|
||
SYNTAX HelloRange
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The length of time, in seconds, between the
|
||
Hello packets that the router sends on the in-
|
||
terface. This value must be the same for all
|
||
routers attached to a common network."
|
||
DEFVAL { 10 }
|
||
::= { swL3ospfIfEntry 9 }
|
||
|
||
swL3ospfIfRtrDeadInterval OBJECT-TYPE
|
||
SYNTAX PositiveInteger
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of seconds that a router's Hello
|
||
packets have not been seen before it's neigh-
|
||
bors declare the router down. This should be
|
||
some multiple of the Hello interval. This
|
||
value must be the same for all routers attached
|
||
to a common network."
|
||
DEFVAL { 40 }
|
||
::= { swL3ospfIfEntry 10 }
|
||
|
||
swL3ospfIfPollInterval OBJECT-TYPE
|
||
SYNTAX PositiveInteger
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The larger time interval, in seconds, between
|
||
the Hello packets sent to an inactive non-
|
||
broadcast multi- access neighbor."
|
||
DEFVAL { 120 }
|
||
::= { swL3ospfIfEntry 11 }
|
||
|
||
swL3ospfIfState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
down (1),
|
||
loopback (2),
|
||
waiting (3),
|
||
pointToPoint (4),
|
||
designatedRouter (5),
|
||
backupDesignatedRouter (6),
|
||
otherDesignatedRouter (7)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The OSPF Interface State."
|
||
DEFVAL { down }
|
||
::= { swL3ospfIfEntry 12 }
|
||
|
||
swL3ospfIfDesignatedRouter OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP Address of the Designated Router."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { swL3ospfIfEntry 13 }
|
||
|
||
swL3ospfIfBackupDesignatedRouter OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP Address of the Backup Designated
|
||
Router."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { swL3ospfIfEntry 14 }
|
||
|
||
swL3ospfIfEvents OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of times this OSPF interface has
|
||
changed its state, or an error has occurred."
|
||
::= { swL3ospfIfEntry 15 }
|
||
|
||
swL3ospfIfMulticastForwarding OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
blocked (1), -- no multicast forwarding
|
||
multicast (2), -- using multicast address
|
||
unicast (3) -- to each OSPF neighbor
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The way multicasts should forwarded on this
|
||
interface; not forwarded, forwarded as data
|
||
link multicasts, or forwarded as data link uni-
|
||
casts. Data link multicasting is not meaning-
|
||
ful on point to point and NBMA interfaces, and
|
||
setting ospfMulticastForwarding to 0 effective-
|
||
ly disables all multicast forwarding."
|
||
DEFVAL { blocked }
|
||
::= { swL3ospfIfEntry 16 }
|
||
|
||
swL3ospfIfDemand OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Indicates whether Demand OSPF procedures (hel-
|
||
lo supression to FULL neighbors and setting the
|
||
DoNotAge flag on proogated LSAs) should be per-
|
||
formed on this interface."
|
||
DEFVAL { false }
|
||
::= { swL3ospfIfEntry 17 }
|
||
|
||
swL3ospfIfAuthType OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
-- none (0),
|
||
-- simplePassword (1)
|
||
-- md5 (2)
|
||
-- reserved for specification by IANA (> 2)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The authentication type specified for an in-
|
||
terface. Additional authentication types may
|
||
be assigned locally."
|
||
REFERENCE
|
||
"OSPF Version 2, Appendix E Authentication"
|
||
DEFVAL { 0 } -- no authentication, by default
|
||
::= { swL3ospfIfEntry 18 }
|
||
|
||
swL3ospfIfAuthKey OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..256))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Authentication Key. If the Area's Author-
|
||
ization Type is simplePassword, and the key
|
||
length is shorter than 8 octets, the agent will
|
||
left adjust and zero fill to 8 octets.
|
||
|
||
Note that unauthenticated interfaces need no
|
||
authentication key, and simple password authen-
|
||
tication cannot use a key of more than 8 oc-
|
||
tets. Larger keys are useful only with authen-
|
||
tication mechanisms not specified in this docu-
|
||
ment.
|
||
|
||
When read, ospfIfAuthKey always returns an Oc-
|
||
tet String of length zero."
|
||
REFERENCE
|
||
"OSPF Version 2, Section 9 The Interface Data
|
||
Structure"
|
||
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
||
::= { swL3ospfIfEntry 19 }
|
||
|
||
swL3ospfIfAuthKeyID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The MD5 key ID."
|
||
::= { swL3ospfIfEntry 20 }
|
||
|
||
swL3ospfIfStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This variable displays the status of the en-
|
||
try. Setting it to 'invalid' has the effect of
|
||
rendering it inoperative. The internal effect
|
||
(row removal) is implementation dependent."
|
||
::= { swL3ospfIfEntry 21 }
|
||
|
||
|
||
swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 }
|
||
|
||
swL3RoutePreferenceRIP OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to configure the route preference of RIP."
|
||
::= { swL3RoutePreference 1 }
|
||
|
||
swL3RoutePreferenceOSPFIntra OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to configure the route preference of OSPF Intra."
|
||
::= { swL3RoutePreference 2 }
|
||
|
||
swL3RoutePreferenceStatic OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to configure the route preference of Static."
|
||
::= { swL3RoutePreference 3 }
|
||
|
||
swL3RoutePreferenceLocal OBJECT-TYPE
|
||
SYNTAX INTEGER (0..999)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to read the route preference of Local."
|
||
::= { swL3RoutePreference 4 }
|
||
|
||
swL3RoutePreferenceOSPFInter OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to configure the route preference of OSPF Inter."
|
||
::= { swL3RoutePreference 5 }
|
||
|
||
swL3RoutePreferenceOSPFExtT1 OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to configure the route preference of OSPFExtT1."
|
||
::= { swL3RoutePreference 6 }
|
||
|
||
swL3RoutePreferenceOSPFExtT2 OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Used to configure the route preference of OSPF ExtT2."
|
||
::= { swL3RoutePreference 7 }
|
||
|
||
|
||
-- ********************************************************************
|
||
swL3PimMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 11 }
|
||
swL3PimCbsrInfoMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 1 }
|
||
|
||
swL3pimCbsrBootStrapPeriod OBJECT-TYPE
|
||
SYNTAX Integer32 (1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"At the elected BSR, this is the interval between originating Bootstrap
|
||
messages, and should be equal to 60 seconds."
|
||
::= { swL3PimCbsrInfoMgmt 1 }
|
||
|
||
swL3pimCbsrHashMaskLen OBJECT-TYPE
|
||
SYNTAX Integer32 (0..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The length (in bits) of the mask to use in the hash function.
|
||
For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126."
|
||
::= { swL3PimCbsrInfoMgmt 2 }
|
||
|
||
swL3pimCbsrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3pimCbsrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The PIM CBSR Table contains the cbsr related information, like
|
||
interface and priority."
|
||
::= { swL3PimCbsrInfoMgmt 3 }
|
||
|
||
swL3pimCbsrEntry OBJECT-TYPE
|
||
SYNTAX SwL3pimCbsrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the PIM CBSR Table."
|
||
INDEX { swL3pimCbsrInterface }
|
||
::= { swL3pimCbsrTable 1 }
|
||
|
||
SwL3pimCbsrEntry ::= SEQUENCE {
|
||
swL3pimCbsrInterface InterfaceIndex,
|
||
swL3pimCbsrPriority Integer32
|
||
}
|
||
|
||
swL3pimCbsrInterface OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ifIndex value of this PIM interface."
|
||
::= { swL3pimCbsrEntry 1 }
|
||
|
||
swL3pimCbsrPriority OBJECT-TYPE
|
||
SYNTAX Integer32 (-1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The preference value for the local interface as a candidate
|
||
bootstrap router. The value of -1 is used to indicate that
|
||
the local interface is not a candidate BSR interface."
|
||
DEFVAL { 0 }
|
||
::= { swL3pimCbsrEntry 2 }
|
||
|
||
|
||
|
||
swL3pimCandidateRPMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 2 }
|
||
swL3pimCandidateRPHoldtime OBJECT-TYPE
|
||
SYNTAX Integer32 (0..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"For C-RPs, this is the Holdtime specified in C-RP-Adv message, and
|
||
is used by the BSR to time out RPs. This should be set to 2.5 *
|
||
[C-RP-Adv-Period]. Default: 150 seconds."
|
||
::= { swL3pimCandidateRPMgmt 1 }
|
||
|
||
swL3pimCandidateRPPriority OBJECT-TYPE
|
||
SYNTAX Integer32 (0..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 'priority' of the included RP, for the corresponding Encoded-Group
|
||
Address (if any), highest priority is '0' (i.e. the lower the value of the
|
||
'Priority' field, the higher the priority). This field is stored at the BSR
|
||
upon receipt along with the RP address and corresponding Encoded-Group Address."
|
||
::= { swL3pimCandidateRPMgmt 2 }
|
||
|
||
swL3pimCandidateRPWildcardPrefixCnt OBJECT-TYPE
|
||
SYNTAX Integer32 (0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of enocded group addresses included in the message; indicating
|
||
the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0'
|
||
implies a prefix of 224.0.0.0 with mask length of 4; i.e. all multicast
|
||
groups. If the C-RP is not configured with Group-prefix information, the
|
||
C-RP puts a default value of '0' in this field."
|
||
::= { swL3pimCandidateRPMgmt 3 }
|
||
|
||
swL3pimSptMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 3 }
|
||
swL3pimLastHopSptThreshold OBJECT-TYPE
|
||
SYNTAX DisplayString(SIZE(1..8))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Specifies a last hop router threshold."
|
||
::= { swL3pimSptMgmt 1 }
|
||
|
||
swL3pimRPSptThreshold OBJECT-TYPE
|
||
SYNTAX DisplayString(SIZE(1..8))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Specifies an RP threshold."
|
||
::= { swL3pimSptMgmt 2 }
|
||
|
||
swL3pimRegChksumIncDataTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3pimRegChksumIncDataEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The PIM Register Checksum Including Data Table contains the PIM
|
||
register checksum including data information, like RP address and
|
||
state."
|
||
::= { swL3PimMgmt 4 }
|
||
|
||
swL3pimRegChksumIncDataEntry OBJECT-TYPE
|
||
SYNTAX SwL3pimRegChksumIncDataEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the PIM Register Checksum Including Data Table."
|
||
INDEX { swL3SwL3pimRegChksumIncDataRpAddr }
|
||
::= { swL3pimRegChksumIncDataTable 1 }
|
||
|
||
SwL3pimRegChksumIncDataEntry ::= SEQUENCE {
|
||
swL3SwL3pimRegChksumIncDataRpAddr IpAddress,
|
||
swL3SwL3pimRegChksumIncDataState RowStatus
|
||
}
|
||
|
||
swL3SwL3pimRegChksumIncDataRpAddr OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Specifies the RP address."
|
||
::= { swL3pimRegChksumIncDataEntry 1 }
|
||
|
||
swL3SwL3pimRegChksumIncDataState OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of register checksum including data for RPs."
|
||
::= { swL3pimRegChksumIncDataEntry 2 }
|
||
|
||
swL3PimInfoMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 5 }
|
||
swL3pimRegisterProbeTime OBJECT-TYPE
|
||
SYNTAX Integer32 (1..127)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"When null Registers are used, this is the time between sending a null
|
||
Register and the Register-Suppression-Timer expiring unless it is restarted
|
||
by receiving a Register-Stop. Thus, a null Register would be sent when the
|
||
Register-Suppression-Timer reaches this value. Default: 5 seconds."
|
||
::= { swL3PimInfoMgmt 1 }
|
||
|
||
swL3pimRegisterSuppressionTime OBJECT-TYPE
|
||
SYNTAX Integer32 (3..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This is the mean interval between receiving a Register-Stop and allowing
|
||
Registers to be sent again. A lower value means more frequent register bursts
|
||
at RP, while a higher value means longer join latency for new receiver.
|
||
Default: 60 seconds."
|
||
::= { swL3PimInfoMgmt 2 }
|
||
|
||
swL3pimInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3pimInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The PIM Information Table contains the PIM related information, like
|
||
DR priority."
|
||
::= { swL3PimInfoMgmt 3 }
|
||
|
||
swL3pimInfoEntry OBJECT-TYPE
|
||
SYNTAX SwL3pimInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the PIM Information Table."
|
||
INDEX { swL3pimInterface }
|
||
::= { swL3pimInfoTable 1 }
|
||
|
||
SwL3pimInfoEntry ::= SEQUENCE {
|
||
swL3pimInterface InterfaceIndex,
|
||
swL3pimDRPriority Unsigned32
|
||
}
|
||
|
||
swL3pimInterface OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ifIndex value of this PIM interface."
|
||
::= { swL3pimInfoEntry 1 }
|
||
|
||
swL3pimDRPriority OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4294967294)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The DR Priority is a 32-bit unsigned number and the numerically larger
|
||
priority is always prefered. A router's idea of the current DR on an interface
|
||
can change when a PIM Hello message is received, when a neighbor timers out,
|
||
or when a router's own DR priority changes."
|
||
-- DEFVAL { 0 }
|
||
::= { swL3pimInfoEntry 2 }
|
||
|
||
-- The PIM Static-RP Table
|
||
|
||
swL3pimStaticRPTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF SwL3pimStaticRPEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The PIM Static RP Table contains the PIM static RP related information,
|
||
like group address, group mask, RP address and RP row status."
|
||
::= { swL3PimMgmt 6 }
|
||
|
||
swL3pimStaticRPEntry OBJECT-TYPE
|
||
SYNTAX SwL3pimStaticRPEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the PIM Static RP Table."
|
||
INDEX { swL3pimStaticRPGroupAddress,
|
||
swL3pimStaticRPGroupMask,
|
||
swL3pimStaticRPAddress }
|
||
::= { swL3pimStaticRPTable 1 }
|
||
|
||
SwL3pimStaticRPEntry ::= SEQUENCE {
|
||
swL3pimStaticRPGroupAddress IpAddress,
|
||
swL3pimStaticRPGroupMask IpAddress,
|
||
swL3pimStaticRPAddress IpAddress,
|
||
swL3pimStaticRPRowStatus RowStatus
|
||
}
|
||
|
||
swL3pimStaticRPGroupAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The IP multicast group address which, when combined with
|
||
swL3pimStaticRPGroupMask, identifies a group prefix for which
|
||
the local router will advertise itself as a static RP."
|
||
::= { swL3pimStaticRPEntry 1 }
|
||
|
||
swL3pimStaticRPGroupMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The multicast group address mask which, when combined with
|
||
swL3pimStaticRPGroupAddress, identifies a group prefix for which
|
||
the local router will advertise itself as a static RP."
|
||
::= { swL3pimStaticRPEntry 2 }
|
||
|
||
swL3pimStaticRPAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The (unicast) address of the interface which will be
|
||
advertised as a static RP."
|
||
::= { swL3pimStaticRPEntry 3 }
|
||
|
||
swL3pimStaticRPRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The status of this row, by which new entries may be
|
||
created, or old entries deleted from this table."
|
||
::= { swL3pimStaticRPEntry 4 }
|
||
|
||
END
|