WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DGS-1210-12TSME-BX

23951 lines
857 KiB
Plaintext
Raw Permalink Blame History

DGS-1210-12TSME-BX DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
enterprises, IpAddress, Integer32, Unsigned32, TimeTicks, Counter32
FROM SNMPv2-SMI
InetAddress FROM INET-ADDRESS-MIB
InterfaceIndex,InterfaceIndexOrZero
FROM IF-MIB
SnmpAdminString,SnmpEngineID,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB
dot1dBridge, dot1dBasePortEntry, dot1dBasePort FROM BRIDGE-MIB
RowStatus, TruthValue, DisplayString,
TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC
VlanId FROM Q-BRIDGE-MIB
AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB;
dgs-1210-12tsmebx MODULE-IDENTITY
LAST-UPDATED "201508200000Z" -- 20 Aguest 2015
ORGANIZATION "DGS-1210-12TSME-BX-7-00-021.mib"
CONTACT-INFO
""
DESCRIPTION
"DES-1210-52ME add QinQ Miss Drop and Add Inner Tag."
-- Revision history
REVISION "201508200000Z" -- 20 Aguest 2015
DESCRIPTION
"DES-1210-52ME add QinQ Miss Drop and Add Inner Tag."
-- Revision history
REVISION "201507230000Z" -- 23 July 2015
DESCRIPTION
"Add LEDPanel object."
-- Revision history
REVISION "201507080000Z" -- 08 July 2015
DESCRIPTION
"Add cpuFilterState object."
-- Revision history
REVISION "201506030000Z" -- 03 Jun 2015
DESCRIPTION
" In order to pass the web www.simpleweb.org to
verify severity level 3, which must be change
the SYNTAX of mib file."
-- Revision history
REVISION "201504160000Z" -- 16 April 2015
DESCRIPTION
"Add trafficCtrlAutoRecoverTime object."
REVISION "201403060000Z" -- 06 March 2014
DESCRIPTION
"Initial version, published as D-Link dgs-1210 12TSME mib."
::= { dgs-1210-12tsme 1 }
d-link OBJECT IDENTIFIER ::= { enterprises 171 }
dlink-products OBJECT IDENTIFIER ::= { d-link 10 }
dlink-DGS12XXSeriesProd OBJECT IDENTIFIER ::= { dlink-products 76}
dgs-1210-12tsme OBJECT IDENTIFIER ::= { dlink-DGS12XXSeriesProd 44 }
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
BridgeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Bridge-Identifier as used in the
Spanning Tree
Protocol to uniquely identify a bridge. Its first two
octets (in network byte order) contain a priority
value and its last 6 octets contain the MAC address
used to refer to a bridge in a unique fashion
(typically, the numerically smallest MAC address
of all ports on the bridge).
Several objects in this MIB module represent values of
timers used by the Spanning Tree Protocol. In this
MIB, these timers have values in units of hundreths of
a second (i.e. 1/100 secs).
These timers, when stored in a Spanning Tree Protocol's
BPDU, are in units of 1/256 seconds. Note, however,
that 802.1D-1990 specifies a settable granularity of
no more than 1 second for these timers. To avoid
ambiguity, a data type is defined here as a textual
convention and all representation of these timers
in this MIB module are defined using this data type. An
algorithm is also defined for converting between the
different units, to ensure a timer's value is not distorted by multiple conversions."
SYNTAX OCTET STRING (SIZE (8))
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
"A STP timer in units of 1/100 seconds
To convert a Timeout value into a value in units of
1/256 seconds, the following algorithm should be used:
b = floor( (n * 256) / 100)
where:
floor = quotient [ignore remainder]
n is the value in 1/100 second units
b is the value in 1/256 second units
To convert the value from 1/256 second units back to
1/100 seconds, the following algorithm should be used:
n = ceiling( (b * 100) / 256)
where:
ceiling = quotient [if remainder is 0], or
quotient + 1 [if remainder is non-zero]
n is the value in 1/100 second units
b is the value in 1/256 second units
Note: it is important that the arithmetic operations are
done in the order specified (i.e., multiply first, divide
second)."
SYNTAX INTEGER
LldpManAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of a management address associated with the LLDP
agent that may be used to reach higher layer entities to
assist discovery by network management.
It should be noted that appropriate security credentials,
such as SNMP engineId, may be required to access the LLDP
agent using a management address. These necessary credentials
should be known by the network management and the objects
associated with the credentials are not included in the
LLDP agent."
SYNTAX OCTET STRING (SIZE (1..31))
OwnerString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model an administratively
assigned name of the owner of a resource. Implementations
must accept values composed of well-formed NVT ASCII
sequences. In addition, implementations should accept
values composed of well-formed UTF-8 sequences.
It is suggested that this name contain one or more of
the following: IP address, management station name,
network manager's name, location, or phone number.
In some cases the agent itself will be the owner of
an entry. In these cases, this string shall be set
to a string starting with 'monitor'.
SNMP access control is articulated entirely in terms
of the contents of MIB views; access to a particular
SNMP object instance depends only upon its presence
or absence in a particular MIB view and never upon
its value or the value of related object instances.
Thus, objects of this type afford resolution of
resource contention only among cooperating
managers; they realize no access control function
with respect to uncooperative parties."
SYNTAX OCTET STRING (SIZE (0..127))
RmonStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of a table entry.
Setting this object to the value invalid(4) has the
effect of invalidating the corresponding entry.
That is, it effectively disassociates the mapping
identified with said entry.
It is an implementation-specific matter as to whether
the agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared to
receive tabular information from agents that corresponds
to entries currently not in use. Proper
interpretation of such entries requires examination
of the relevant RmonStatus object.
An existing instance of this object cannot be set to
createRequest(2). This object may only be set to
createRequest(2) when this instance is created. When
this object is created, the agent may wish to create
supplemental object instances with default values
to complete a conceptual row in this table. Because the
creation of these default objects is entirely at the option
of the agent, the manager must not assume that any will be
created, but may make use of any that are created.
Immediately after completing the create operation, the agent
must set this object to underCreation(3).
When in the underCreation(3) state, an entry is allowed to
exist in a possibly incomplete, possibly inconsistent state,
usually to allow it to be modified in multiple PDUs. When in
this state, an entry is not fully active.
Entries shall exist in the underCreation(3) state until
the management station is finished configuring the entry
and sets this object to valid(1) or aborts, setting this
object to invalid(4). If the agent determines that an
entry has been in the underCreation(3) state for an
abnormally long time, it may decide that the management
station has crashed. If the agent makes this decision,
it may set this object to invalid(4) to reclaim the
entry. A prudent agent will understand that the
management station may need to wait for human input
and will allow for that possibility in its
determination of this abnormally long period.
An entry in the valid(1) state is fully configured and
consistent and fully represents the configuration or
operation such a row is intended to represent. For
example, it could be a statistical function that is
configured and active, or a filter that is available
in the list of filters processed by the packet capture
process.
A manager is restricted to changing the state of an entry in
the following ways:
To: valid createRequest underCreation invalid
From:
valid OK NO OK OK
createRequest N/A N/A N/A N/A
underCreation OK NO OK OK
invalid NO NO NO OK
nonExistent NO OK NO OK
In the table above, it is not applicable to move the state
from the createRequest state to any other state because the
manager will never find the variable in that state. The
nonExistent state is not a value of the enumeration, rather
it means that the entryStatus variable does not exist at all.
An agent may allow an entryStatus variable to change state in
additional ways, so long as the semantics of the states are
followed. This allowance is made to ease the implementation of
the agent and is made despite the fact that managers should
never exercise these additional state transitions."
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
Ipv6Address ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network
byte-order."
SYNTAX OCTET STRING (SIZE (16))
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
-- end DLINK_METRO_LIKE_FIRMWARE_INFO_DISPLAY
-- start DLINK_METRO_LIKE_FIRMWARE_INFO_DISPLAY
companySystem OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 1 }
companyIpifGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 2 }
companyTftpGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 3 }
companyMiscGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 4 }
companySNMPV3 OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 5 }
companySTP OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 6 }
companyDot1qVlanGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 7 }
companyLA OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 8 }
companyStaticMAC OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 9 }
companyIgsGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 10 }
companyGVRPGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 11 }
companyQoSGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 12 }
companyTrafficMgmt OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 13 }
companySecurity OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 14 }
companyACLGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 15 }
companySyslog OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 16 }
companyLBD OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 17 }
companyMirror OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 18 }
companyStaticMcast OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 19 }
companySNTPSetting OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 20 }
companyRMON OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 22 }
companyAuthGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 23 }
companyGuestVlan OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 24 }
companyMacNotify OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 25 }
companyISMVLAN OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 27 }
companyDHCPRelay OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 28 }
companyDHCPLocalRelay OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 29 }
companyGreenSetting OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 31 }
sysFirmwareInfomation OBJECT IDENTIFIER ::= { companySystem 31 }
companyLLDPSetting OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 32 }
companyCPUInterfaceFilterGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 33 }
companyStaticARP OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 34 }
companyCableDiagnostic OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 35 }
companyVLANTrunk OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 36 }
companyTimeRangeMgmt OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 38 }
companySMTP OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 40 }
companyMultiIPInterface OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 41 }
companyLimitIp OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 45 }
companyGratuitousARP OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 48 }
companyNeighbor OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 50 }
companyEoam OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 51 }
companyDuld OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 52 }
companydot3azEEE OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 53 }
companyMacAuthGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 54 }
companyWACAuthGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 55}
companyMacBasedVlan OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 70 }
companyBPDUAttack OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 77 }
companyDHCPv6Relay OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 86 }
companyMldsGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 88 }
companyPPPoE OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 98 }
companyDoSCtrl OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 99 }
companyAgentBasicInfo OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 100 }
companyProtocolVlan OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 101 }
companyL2PT OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 102 }
companyQinQ OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 103 }
companySfpVendorInfo OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 104 }
companyDDM OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 105 }
companyCpuProtect OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 106 }
companyFTPGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 107 }
companyERPSGroup OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 108 }
companyTraps OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 120 }
companyswLedPanel OBJECT IDENTIFIER ::= { dgs-1210-12tsmebx 121 }
-- ---------------------------------------------------------------- --
-- ------------------------------------------------------------------
-- companySystem
-- ------------------------------------------------------------------
sysSwitchName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character: ( ) V + _ = ."
::= { companySystem 1 }
sysHardwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version number of the Hardware."
DEFVAL { "" }
::= { companySystem 2 }
sysFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version number of the Firmware."
DEFVAL { "" }
::= { companySystem 3 }
sysLoginTimeoutInterval OBJECT-TYPE
SYNTAX Integer32 (3..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This time interval is used to count the time and
logout web interface automatically."
DEFVAL { 5 }
::= { companySystem 4 }
sysLocationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string."
::= { companySystem 5 }
sysGroupInterval OBJECT-TYPE
SYNTAX Integer32 (0 | 120..1225)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Group Interval is used to send D-link Discover packet to D-link
SmartConsole Utility frequency.
The timer in units of seconds.
Set value 0 to disable group Interval."
::= { companySystem 6 }
sysSystemPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set System Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { companySystem 7 }
sysSafeGuardEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set Safeguard Enable\Disable."
DEFVAL { enable }
::= { companySystem 8 }
sysRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again. Setting a value of 'true' causes the switch
to be restarted.
When the switch operationally goes down, configuration
save operation is initiated based on the configuration save
option chosen.
When the switch operationally come up, the saved configurations
are restored based on the restore option chosen.
Once the switch is restarted, the value of this object reverts
to 'false'."
DEFVAL { false }
::= { companySystem 9 }
sysSave OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2),
config-1 (3),
config-2 (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to save Configuration , value 1 save config_1 ,
value 2 is not in process , value 3 is save config_1 and value 4 is save config_2."
DEFVAL { 1 }
::= { companySystem 10 }
sysPowerSavingEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Power Saving mode is capable of reducing power consumption automatically
when connected devices are switched off or cable length less than 20meters.
By reducing power consumption, less heat is produced, resulting in
extended product life and lower operating costs. By default, the Power Saving
mode is enabled."
DEFVAL { enable }
::= { companySystem 11 }
sysJumboFrameEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gigabit Web Smart Switches support jumbo frames (frames larger than
the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged).
Default jumbo frame is disabled."
DEFVAL { disable }
::= { companySystem 12 }
-- Port Control Table
sysPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { companySystem 13 }
sysPortCtrlEntry OBJECT-TYPE
SYNTAX SysPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { sysPortCtrlIndex , sysPortCtrlMediumType}
::= { sysPortCtrlTable 1 }
SysPortCtrlEntry ::=
SEQUENCE {
sysPortCtrlIndex
Integer32,
sysPortCtrlMediumType
INTEGER,
sysPortCtrlSpeed
INTEGER,
sysPortCtrlOperStatus
INTEGER,
sysPortCtrlMDI
INTEGER,
sysPortCtrlFlowControl
INTEGER,
sysPortCtrlFlowControlOper
INTEGER,
sysPortCtrlType
INTEGER,
sysPortCtrlCapability
BITS
}
sysPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { sysPortCtrlEntry 1 }
sysPortCtrlMediumType OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port type: fiber 1G/100M or copper."
::= { sysPortCtrlEntry 2 }
sysPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
rate1000M-Full (1),
rate100M-Full (2),
rate100M-Half (3),
rate10M-Full (4),
rate10M-Half (5),
auto (6),
disable (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed."
::= { sysPortCtrlEntry 3 }
sysPortCtrlOperStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
rate1000M-Full (2),
rate100M-Full (3),
rate100M-Half (4),
rate10M-Full (5),
rate10M-Half (6),
rate10G-Full (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's operating speed state."
::= { sysPortCtrlEntry 4 }
sysPortCtrlMDI OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
mdi (2),
mdix (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface auto/mdi/mdix mode.
The default setting is Auto."
::= { sysPortCtrlEntry 5 }
sysPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface."
::= { sysPortCtrlEntry 6 }
sysPortCtrlFlowControlOper OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link parner negotiate port's operating flow control state."
::= { sysPortCtrlEntry 7 }
sysPortCtrlType OBJECT-TYPE
SYNTAX INTEGER {
fastethernet(1),
gigabitethernet(2),
fiberwith100BaseSFPModule(3),
fiberwith1GBaseSFPModule(4),
fiberwith10GBaseSFPModule(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's media type."
::= { sysPortCtrlEntry 8 }
sysPortCtrlCapability OBJECT-TYPE
SYNTAX BITS {
rate10-half(0),
rate10-full(1),
rate100-half(2),
rate100-full(3),
reserve(4),
rate1000-full(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's capability advertised."
::= { sysPortCtrlEntry 9 }
-- start DLINK_METRO_LIKE_GENERAL
sysPortDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port description table."
::= { companySystem 14 }
sysPortDescriptionEntry OBJECT-TYPE
SYNTAX SysPortDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port description entry."
INDEX { sysPortDescIndex, sysPortDescMediumType }
::= { sysPortDescriptionTable 1 }
SysPortDescriptionEntry ::=
SEQUENCE {
sysPortDescIndex
INTEGER,
sysPortDescMediumType
INTEGER,
sysPortDescString
DisplayString,
sysPortUpLinkTime
DisplayString
}
sysPortDescIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { sysPortDescriptionEntry 1 }
sysPortDescMediumType OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port type: fiber 1G/100M or copper."
::= { sysPortDescriptionEntry 2 }
sysPortDescString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port description."
::= { sysPortDescriptionEntry 3 }
sysPortUpLinkTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port link up time."
::= { sysPortDescriptionEntry 4 }
-- end DLINK_METRO_LIKE_GENERAL
-- start DLINK_METRO_LIKE_GENERAL
sysPortErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port error table."
::= { companySystem 15 }
sysPortErrEntry OBJECT-TYPE
SYNTAX SysPortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for the err port of the device."
INDEX { sysPortErrPortIndex }
::= { sysPortErrTable 1 }
SysPortErrEntry ::=
SEQUENCE {
sysPortErrPortIndex
INTEGER,
sysPortErrPortState
INTEGER,
sysPortErrPortStatus
INTEGER,
sysPortErrPortReason
INTEGER
}
sysPortErrPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { sysPortErrEntry 1 }
sysPortErrPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the port state is enabled or disabled."
::= { sysPortErrEntry 2 }
sysPortErrPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the PortStatus is err-disabled."
::= { sysPortErrEntry 3 }
sysPortErrPortReason OBJECT-TYPE
SYNTAX INTEGER {
lbd(1),
traffic-control(2),
duld(3),
bpdu-protection(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the PortStatus is LBD."
::= { sysPortErrEntry 4 }
-- end DLINK_METRO_LIKE_GENERAL
sysDhcpAutoConfiguration OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates auto config is enabled or disabled."
DEFVAL { disable }
::= { companySystem 16 }
-- start DLINK_METRO_LIKE_GENERAL
sysWebState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Enabled(1) or Disabled(2) Web state in the system."
::= { companySystem 17 }
sysWebPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Server Port Number."
DEFVAL { 80 }
::= { companySystem 18 }
sysARPAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for ARP aging time."
::= { companySystem 19 }
sysMACAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for MAC aging time."
::= { companySystem 20 }
baudRateConfiguration OBJECT-TYPE
SYNTAX INTEGER {
baudrate9600(9600),
baudrate19200(19200),
baudrate38400(38400),
baudrate115200(115200)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set SerialPort baud-rate configuration."
::= { companySystem 21 }
autologoutConfiguration OBJECT-TYPE
SYNTAX INTEGER {
logouttime2mins(120),
logouttime5mins(300),
logouttime10mins(600),
logouttime15mins(900),
logouttimenever(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set SerialPort auto-logout-time configuration."
::= { companySystem 22 }
telnetsettingManagementOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable management Telnetsetting mechanism."
::= { companySystem 23 }
telnetUDPPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting telnet's UDP Port."
DEFVAL { 23 }
::= { companySystem 24 }
autoRefreshConfiguration OBJECT-TYPE
SYNTAX INTEGER {
refreshimenever(0),
refreshtime10secs(1),
refreshtime30secs(2),
refreshtime1min(3),
refreshtime5mins(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set the WEB panel auto refresh timer."
::= { companySystem 25 }
floodfdbOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set enable status for flood fdb."
::= { companySystem 26 }
sysContactName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set system contact name."
::= { companySystem 27 }
-- end DLINK_METRO_LIKE_GENERAL
sysDhcpAutoConfigTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set dhcp auto config timeout."
::= { companySystem 28 }
sysCommandLogging OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set enable status for CommandLogging."
::= { companySystem 29 }
sysSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..13))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To get the serial number."
::= { companySystem 30 }
-- start DLINK_METRO_LIKE_FIRMWARE_INFO_DISPLAY
--FirmwareInfo
sysVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of firmware information."
DEFVAL { "" }
::= { sysFirmwareInfomation 1 }
sysSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of firmware information."
::= { sysFirmwareInfomation 2 }
sysUpdateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Update Time of firmware information."
::= { sysFirmwareInfomation 3 }
sysFromIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of firmware information."
::= { sysFirmwareInfomation 4 }
sysUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..9))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user of firmware infomation."
::= { sysFirmwareInfomation 5 }
sysType OBJECT-TYPE
SYNTAX INTEGER{
console(1),
telnet(2),
ssh(3),
web(4),
unknown(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of firmware infomation."
::= { sysFirmwareInfomation 6 }
-- end DLINK_METRO_LIKE_FIRMWARE_INFO_DISPLAY
sysDdp OBJECT IDENTIFIER ::= { companySystem 32 }
sysDdpGlobalOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates D-Link discover protocol is enabled or disabled."
::= { sysDdp 1 }
sysDdpGeneralReportOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates D-Link discover protocol report is enabled or disabled.
This object only can be modified when D-Link discover protocol state is enabled."
::= { sysDdp 2 }
sysDdpGeneralReportTimer OBJECT-TYPE
SYNTAX INTEGER {
time30seconds(30),
time60seconds(60),
time90seconds(90),
time120seconds(120)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates D-Link discover protocol report time period.
This object only can be modified when both D-Link discover protocol state and
D-Link discover protocol report state are enabled."
::= { sysDdp 3 }
sysDdpPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysDdpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port status of D-Link discover protocol."
::= { sysDdp 4 }
sysDdpPortStatusEntry OBJECT-TYPE
SYNTAX SysDdpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each port D-Link discover protocol status."
INDEX { sysDdpPortStatusIndex }
::= { sysDdpPortStatusTable 1 }
SysDdpPortStatusEntry ::=
SEQUENCE {
sysDdpPortStatusIndex
Integer32,
sysDdpPortStatusControl
INTEGER
}
sysDdpPortStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { sysDdpPortStatusEntry 1 }
sysDdpPortStatusControl OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the port status of D-Link discover protocol."
::= { sysDdpPortStatusEntry 2 }
sysDhcpAutoImage OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates auto image is enabled or disabled."
DEFVAL { disable }
::= { companySystem 34 }
sysBootupConfigID OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To get/set bootup config ID."
::= { companySystem 35 }
sysBootupImage OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To get/set bootup Image."
::= { companySystem 36 }
-- Port Media Type Table
sysPortMediaTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortMediaTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
Vendor name, etc."
::= { companySystem 37 }
sysPortMediaTypeEntry OBJECT-TYPE
SYNTAX SysPortMediaTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { sysPortMediaTypeIndex , sysPortMediaType}
::= { sysPortMediaTypeTable 1 }
SysPortMediaTypeEntry ::=
SEQUENCE {
sysPortMediaTypeIndex
Integer32,
sysPortMediaType
INTEGER,
sysPortType
INTEGER,
sysPortMediaTypeVendorName
DisplayString,
sysPortMediaTypeOui
DisplayString,
sysPortMediaTypePn
DisplayString,
sysPortMediaTypeRev
DisplayString,
sysPortMediaTypeSn
DisplayString,
sysPortMediaTypeDateCode
DisplayString
}
sysPortMediaTypeIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { sysPortMediaTypeEntry 1 }
sysPortMediaType OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port type: fiber 1G/100M or copper."
::= { sysPortMediaTypeEntry 2 }
sysPortType OBJECT-TYPE
SYNTAX INTEGER {
rate100M (1),
rate1000M (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configures interface speed."
::= { sysPortMediaTypeEntry 3 }
sysPortMediaTypeVendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's VendorName."
::= { sysPortMediaTypeEntry 4 }
sysPortMediaTypeOui OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's Oui."
::= { sysPortMediaTypeEntry 5 }
sysPortMediaTypePn OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's Pn."
::= { sysPortMediaTypeEntry 6 }
sysPortMediaTypeRev OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's Rev."
::= { sysPortMediaTypeEntry 7 }
sysPortMediaTypeSn OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's Sn."
::= { sysPortMediaTypeEntry 8 }
sysPortMediaTypeDateCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's DateCode."
::= { sysPortMediaTypeEntry 9 }
-- ----------------------------------------------------------
-- The company802Dot3az Groups
-- ----------------------------------------------------------
dot3azEEEset OBJECT IDENTIFIER ::= { companydot3azEEE 1 }
-- 802Dot3azTable Group --------------------------------------------- --
dot3azTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3azEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control IEEE802.3az EEE settings features of the device."
::= { dot3azEEEset 1 }
dot3azEntry OBJECT-TYPE
SYNTAX Dot3azEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in IEEE802.3az EEE table for each interface
in the system."
INDEX { portD3Index }
::= { dot3azTable 1 }
Dot3azEntry ::=
SEQUENCE {
portD3Index
Integer32,
portD3State
INTEGER
}
portD3Index OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies.
For all machines give maximum port number."
::= { dot3azEntry 1 }
portD3State OBJECT-TYPE
SYNTAX INTEGER {
enabled (1), disabled (2), notsupported (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / disable port IEEE802.3az EEE admin state for the interface.
A given ports' dynamic MAC address learning will be stopped such
that the current source MAC addresses entered into the MAC address
forwarding table can not be changed once the port security admin
state is enabled."
::= { dot3azEntry 2 }
-- -------------------------------------------------------------------------
-- companyIpifGroup
-- -------------------------------------------------------------------------
ipv4sysIpAddrCfgMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the means by which the default interface in the device
gets the IP address.
If 'manual' mode is selected, the default interface takes the
'sysDefaultIpAddr' configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address
through dynamic IP address configuration protocols such as RARP client,
BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the
above protocols, the default interface uses the 'sysDefaultIpAddr'
configured in the system."
DEFVAL { manual }
::= { companyIpifGroup 1 }
ipv4sysIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default IP Address of the system.
This IP address, if modified, will take effect only when the
configuration is stored & restored."
::= { companyIpifGroup 2 }
ipv4sysIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP subnet mask for the default IP address.
This subnet mask, if modified, will take effect only when the
configuration is stored & restored."
::= { companyIpifGroup 3 }
ipv4sysGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway"
::= { companyIpifGroup 4 }
ipv4dhcpOption12Status OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of DHCP Option12"
::= { companyIpifGroup 5 }
ipv4dhcpOption12HostName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Host name in DHCP option 12"
::= { companyIpifGroup 6 }
-- ----------------------------------------------------------------
-- The multiIFSupportV4V6Info group
-- ----------------------------------------------------------------
ipifSupportV4V6Info OBJECT IDENTIFIER ::= { companyIpifGroup 7 }
sysIpAddrCfgMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the means by which the default interface in the device
gets the IP address.
If 'manual' mode is selected, the default interface takes the
'sysDefaultIpAddr' configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address
through dynamic IP address configuration protocols such as RARP client,
BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the
above protocols, the default interface uses the 'sysDefaultIpAddr'
configured in the system."
DEFVAL { manual }
::= { ipifSupportV4V6Info 1 }
sysIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default IP Address of the system.
This IP address, if modified, will take effect only when the
configuration is stored & restored."
::= { ipifSupportV4V6Info 2 }
sysIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP subnet mask for the default IP address.
This subnet mask, if modified, will take effect only when the
configuration is stored & restored."
::= { ipifSupportV4V6Info 3 }
sysGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway"
::= { ipifSupportV4V6Info 4 }
dhcpOption12Status OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of DHCP Option12"
::= { ipifSupportV4V6Info 5 }
dhcpOption12HostName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Host name in DHCP option 12"
::= { ipifSupportV4V6Info 6 }
ipifName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Description for the interface."
::= { ipifSupportV4V6Info 7 }
ipifVLANname OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan name for the interface."
::= { ipifSupportV4V6Info 8 }
ipifv6GlobalStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of VLAN that you want this interface to be in.
It must be a exist vlan id."
::= { ipifSupportV4V6Info 9 }
ipifv6DHCPStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of DHCPv6 that you want this interface to be in.
It must be a exist vlan id."
::= { ipifSupportV4V6Info 10 }
ipifv6AutolinkloStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global state of link local that you want this interface to be in.
It must be a exist vlan id."
::= { ipifSupportV4V6Info 11 }
ipifv6NSRetransmitTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NS's retransmit time that you want this interface to be in.
It must be a exist vlan id (1~3600)."
::= { ipifSupportV4V6Info 12 }
ipifv6DefaultGateway OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ipv6 default gateway that you want this interface to be in.
It must be a exist vlan id."
::= { ipifSupportV4V6Info 13 }
-- ---------------------------------------------------------------------
-- ---------------------------------------------------------------------
ipifV6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpifV6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries."
::= { ipifSupportV4V6Info 14}
ipifV6AddressEntry OBJECT-TYPE
SYNTAX IpifV6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { ipifV6AddressMainIndex, ipifV6AddressIpAddr, ipifV6AddressIpPrefix }
::= { ipifV6AddressTable 1 }
IpifV6AddressEntry ::=
SEQUENCE {
ipifV6AddressMainIndex InterfaceIndex,
ipifV6AddressIpAddr Ipv6Address, -- IPv6 Address.
ipifV6AddressIpPrefix INTEGER, -- IPv6 Address Prefix.
ipifV6AddressIpType INTEGER, -- IP type (Link-local, Global, anycast).
ipifV6AddressRowStatus RowStatus -- IPv6 Address entries row status.
}
ipifV6AddressMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this IPv6 entry."
::= { ipifV6AddressEntry 1 }
ipifV6AddressIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of this IPv6 entry."
DEFVAL { '00000000'H }
::= { ipifV6AddressEntry 2 }
ipifV6AddressIpPrefix OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip prefix of this IPv6 entry."
::= { ipifV6AddressEntry 3 }
ipifV6AddressIpType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
linklocal(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip type of this IPv6 entry."
::= { ipifV6AddressEntry 4 }
ipifV6AddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Multi Interface Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available."
::= { ipifV6AddressEntry 5 }
-- ---------------------------------------------------------------------
-- ---------------------------------------------------------------------
ipv4sysIprouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IProute Gateway of the system."
::= { companyIpifGroup 8 }
ipv4sysIprouteHops OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IProute Hops of the system."
::= { companyIpifGroup 9 }
-- -------------------------------------------------------------------------
-- companyTftpGroup
-- -------------------------------------------------------------------------
tftpFwServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The TFTP server's IP address is used to upload or
download firmware."
::= { companyTftpGroup 1 }
tftpFwImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Configure firmware filename to download."
::= { companyTftpGroup 2 }
tftpFwTftpOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The tftp operates to perform downloading the firmware image
to the unit. This object is used in conjunction with
configBootTftpServerIp and configBootImageFileName."
::= { companyTftpGroup 3 }
tftpFwTftpOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The tftp operation status represent firmware backup or upgrade status."
::= { companyTftpGroup 4 }
tftpCfgServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The TFTP server's IP address is used to upload or
download configuration file."
::= { companyTftpGroup 5 }
tftpConfigFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The configuration filename is used to store or retrieve config
from the tftp server."
::= { companyTftpGroup 6 }
tftpConfigTftpOperation OBJECT-TYPE
SYNTAX INTEGER {
download(1),
upload(2),
progressing(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The tftp operates to perform either downloading the
configuration file to the unit or uploading the current
configuration file to the tftp server. This object is
used in conjunction with configTftpServerIpAddress
and configTftpServerFileName."
::= { companyTftpGroup 7 }
tftpConfigTftpOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The tftp operation status represent configuration file backup or restore status."
::= { companyTftpGroup 8 }
tftpFwTargetGroup OBJECT IDENTIFIER ::= { companyTftpGroup 9 }
tftpFwTargetServerIpAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server's IP address is used to upload or
download firmware."
::= { tftpFwTargetGroup 1 }
tftpFwTargetServerIpType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP interface."
::= { tftpFwTargetGroup 2 }
tftpFwTargetInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name when the tftpFwTargetServerIpAddress
is linklocal address."
::= { tftpFwTargetGroup 3 }
tftpFwTargetImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure firmware filename to download."
::= { tftpFwTargetGroup 4 }
tftpFwTargetTftpOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tftp operates to perform downloading the firmware image
to the unit. This object is used in conjunction with
configBootTftpServerIp and configBootImageFileName."
::= { tftpFwTargetGroup 5 }
tftpFwTargetTftpOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tftp operation status represent firmware backup or upgrade status."
::= { tftpFwTargetGroup 6 }
tftpCfgTargetGroup OBJECT IDENTIFIER ::= { companyTftpGroup 10 }
tftpCfgTargetServerIpAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server's IP address is used to upload or
download configuration file."
::= { tftpCfgTargetGroup 1 }
tftpCfgTargetServerIpType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP interface."
::= { tftpCfgTargetGroup 2 }
tftpCfgTargetInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name when the tftpCfgTargetServerIpAddress
is linklocal address."
::= { tftpCfgTargetGroup 3 }
tftpCfgTargetImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration filename is used to store or retrieve config
from the tftp server."
::= { tftpCfgTargetGroup 4 }
tftpCfgTargetTftpOperation OBJECT-TYPE
SYNTAX INTEGER {
download(1),
upload(2),
progressing(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tftp operates to perform either downloading the
configuration file to the unit or uploading the current
configuration file to the tftp server. This object is
used in conjunction with configTftpServerIpAddress
and configTftpServerFileName."
::= { tftpCfgTargetGroup 5 }
tftpCfgTargetTftpOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tftp operation status represent configuration file backup or restore status."
::= { tftpCfgTargetGroup 6 }
tftpCfgTargetConfigID OBJECT-TYPE
SYNTAX INTEGER {
config1(1),
config2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tftp operates to perform either downloading the
configuration file to the unit or uploading the current
configuration file to the tftp server. This object is
used in conjunction with configTftpServerIpAddress
and configTftpServerFileName."
::= { tftpCfgTargetGroup 7 }
-- -------------------------------------------------------------------------
-- company Extension MIB, Miscellaneous Information
-- -------------------------------------------------------------------------
miscReset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
noop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Physically resets the unit - use with care. A (1) resets
the unit, a (2) does nothing."
::= { companyMiscGroup 2 }
miscStatisticsReset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
noop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Resets the units statistics. A (1) resets
the statistics count, a (2) does nothing."
::= { companyMiscGroup 3 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityIpMacPortBinding OBJECT IDENTIFIER ::= { companySecurity 10 }
-- IpMacPortBinding Group --------------------------------------------- --
impbSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF ImpbSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control IP-MAC-Port Binding Setting features of the device."
::= { securityIpMacPortBinding 1 }
impbSettingEntry OBJECT-TYPE
SYNTAX ImpbSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in IP-MAC-Port Binding Setting table for each interface
in the system."
INDEX { impbPortIndex }
::= { impbSettingTable 1 }
ImpbSettingEntry ::=
SEQUENCE {
impbPortIndex
INTEGER,
impbPortState
INTEGER,
impbPortDHCPSnoopingState
INTEGER,
impbPortArpInspectionState
INTEGER,
impbPortIpInspectionState
INTEGER,
impbPortAllowZeroIPState
INTEGER,
impbPortForwardDHCPPktState
INTEGER,
impbPortDHCPMaxEntryIPv4
Integer32,
impbPortDHCPMaxEntryIPv6
Integer32,
impbPortNDInspectionState
INTEGER,
impbPortProtocolState
INTEGER,
impbPortDHCPv4SetVlanList
OCTET STRING,
impbPortDHCPv4VlanList1k
OCTET STRING,
impbPortDHCPv4VlanList2k
OCTET STRING,
impbPortDHCPv4VlanList3k
OCTET STRING,
impbPortDHCPv4VlanList4k
OCTET STRING,
impbPortDHCPv6SetVlanList
OCTET STRING,
impbPortDHCPv6VlanList1k
OCTET STRING,
impbPortDHCPv6VlanList2k
OCTET STRING,
impbPortDHCPv6VlanList3k
OCTET STRING,
impbPortDHCPv6VlanList4k
OCTET STRING
}
impbPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { impbSettingEntry 1 }
impbPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding admin state for the interface."
::= { impbSettingEntry 2 }
impbPortDHCPSnoopingState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding DHCP snooping state for the interface."
::= { impbSettingEntry 4 }
impbPortArpInspectionState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), strict (1), loose (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IP-MAC-Port Binding ARP Inspection state for the interface."
::= { impbSettingEntry 5 }
impbPortIpInspectionState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IP-MAC-Port Binding IP Inspection state for the interface."
::= { impbSettingEntry 6 }
impbPortAllowZeroIPState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding Allow-Zero-IP state for the interface."
::= { impbSettingEntry 7 }
impbPortForwardDHCPPktState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding Forward-DHCP-Packet state for the interface."
::= { impbSettingEntry 8 }
impbPortDHCPMaxEntryIPv4 OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the maximum number of IPv4 entries that can be learned for the interface."
::= { impbSettingEntry 9 }
impbPortDHCPMaxEntryIPv6 OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the maximum number of IPv6 entries that can be learned for the interface."
::= { impbSettingEntry 10 }
impbPortNDInspectionState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IP-MAC-Port Binding ND Inspection state for the interface."
::= { impbSettingEntry 11 }
impbPortProtocolState OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (0), ipv6 (1), all (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IP-MAC-Port Binding protocol state for the interface."
::= { impbSettingEntry 12 }
impbPortDHCPv4SetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { impbSettingEntry 13 }
impbPortDHCPv4VlanList1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this DHCP snooping,
the bit corresponding to that VLAN is set to '1'. "
::= { impbSettingEntry 14 }
impbPortDHCPv4VlanList2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this DHCPv4 snooping,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { impbSettingEntry 15 }
impbPortDHCPv4VlanList3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this DHCPv4 snooping
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { impbSettingEntry 16 }
impbPortDHCPv4VlanList4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4094.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this DHCPv4 snooping,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { impbSettingEntry 17 }
impbPortDHCPv6SetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { impbSettingEntry 18 }
impbPortDHCPv6VlanList1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this DHCP snooping,
the bit corresponding to that VLAN is set to '1'. "
::= { impbSettingEntry 19 }
impbPortDHCPv6VlanList2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this DHCPv6 snooping,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { impbSettingEntry 20 }
impbPortDHCPv6VlanList3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this DHCPv6 snooping
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { impbSettingEntry 21 }
impbPortDHCPv6VlanList4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4094.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this DHCPv6 snooping,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { impbSettingEntry 22 }
impbAutoScanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ImpbAutoScanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control auto scan features of the device."
::= { securityIpMacPortBinding 2 }
impbAutoScanEntry OBJECT-TYPE
SYNTAX ImpbAutoScanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in auto scan table for each interface
in the system."
INDEX { impbAutoScanMacAddress, impbAutoScanPort, impbAutoScanIpAddress}
::= { impbAutoScanTable 1 }
ImpbAutoScanEntry ::=
SEQUENCE {
impbAutoScanMacAddress
MacAddress,
impbAutoScanPort
Integer32,
impbAutoScanIpAddress
DisplayString,
impbAutoScanVlanId
Integer32,
impbAutoScanBinding
INTEGER
}
impbAutoScanMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the auto scan entry."
::= { impbAutoScanEntry 1 }
impbAutoScanPort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the auto scan entry.
For all machines give maximum port number."
::= { impbAutoScanEntry 2 }
impbAutoScanIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address associated of the auto scan entry."
DEFVAL { '00000000'H }
::= { impbAutoScanEntry 3 }
impbAutoScanVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the auto scan entry."
::= { impbAutoScanEntry 4 }
impbAutoScanBinding OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding for the entry."
::= { impbAutoScanEntry 5 }
impbBindingListTable OBJECT-TYPE
SYNTAX SEQUENCE OF ImpbBindingListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control Manual IP-MAC-Port Binding white list features of the device."
::= { securityIpMacPortBinding 3 }
impbBindingListEntry OBJECT-TYPE
SYNTAX ImpbBindingListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in Manual IP-MAC-Port Binding white list table for each interface
in the system."
INDEX { impbBindingListIpAddress, impbBindingListMacAddress }
::= { impbBindingListTable 1 }
ImpbBindingListEntry ::=
SEQUENCE {
impbBindingListIpAddress
DisplayString,
impbBindingListMacAddress
MacAddress,
impbBindingListPort
Integer32,
impbBindingListRowStatus
RowStatus
}
impbBindingListIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address associated of the Manual IP-MAC-PORT Binding white list entry."
DEFVAL { '00000000'H }
::= { impbBindingListEntry 1 }
impbBindingListMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the Manual IP-MAC-PORT Binding white list entry."
::= { impbBindingListEntry 2 }
impbBindingListPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of the Manual IP-MAC-PORT Binding white list entry."
::= { impbBindingListEntry 3 }
impbBindingListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in impbBindingListTable. By setting this object, new
entries can be created in impbBindingListTable and existing entries can be
removed from impbBindingListTable. It can be used as specified in the SNMP
v2 standard."
::= { impbBindingListEntry 4 }
impbBlockListTable OBJECT-TYPE
SYNTAX SEQUENCE OF ImpbBlockListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control IP-MAC-Port Binding black list of the device."
::= { securityIpMacPortBinding 4 }
impbBlockListEntry OBJECT-TYPE
SYNTAX ImpbBlockListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in Manual IP-MAC-Port Binding black list table for each interface
in the system."
INDEX { impbBlockListMacAddress, impbBlockListVlanId, impbBlockListPort }
::= { impbBlockListTable 1 }
ImpbBlockListEntry ::=
SEQUENCE {
impbBlockListMacAddress
MacAddress,
impbBlockListVlanId
Integer32,
impbBlockListPort
Integer32,
impbBlockListIpAddress
DisplayString,
impbBlockListStatus
INTEGER
}
impbBlockListMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the IP-MAC-PORT Binding black list entry."
::= { impbBlockListEntry 1 }
impbBlockListVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the IP-MAC-PORT Binding black list entry."
::= { impbBlockListEntry 2 }
impbBlockListPort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the IP-MAC-PORT Binding black list entry."
::= { impbBlockListEntry 3 }
impbBlockListIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address associated of the IP-MAC-PORT Binding black list entry."
DEFVAL { '00000000'H }
::= { impbBlockListEntry 4 }
impbBlockListStatus OBJECT-TYPE
SYNTAX INTEGER {
nothing (0), deleted (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"nothing/delete IP-MAC-Port Binding for the interface."
::= { impbBlockListEntry 5 }
impbAutoScanIpAddressFrom OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The begin for IP address associated of the IP-MAC-PORT Binding auto scan entry."
DEFVAL { '00000000'H }
::= { securityIpMacPortBinding 5 }
impbAutoScanIpAddressTo OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end for IP address associated of the IP-MAC-PORT Binding auto scan entry."
DEFVAL { '00000000'H }
::= { securityIpMacPortBinding 6 }
impbAutoScanStatus OBJECT-TYPE
SYNTAX INTEGER {
nothing (0), scan (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Nothing / scan IP-MAC-Port Binding auto scan for the interface."
::= { securityIpMacPortBinding 7 }
impbDhcpSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF ImpbDhcpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to display DHCP snooping entries of the device."
::= { securityIpMacPortBinding 8 }
impbDhcpSnoopingEntry OBJECT-TYPE
SYNTAX ImpbDhcpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in DHCP snooping table for each interface
in the system."
INDEX { impbDhcpSnoopingMacAddress, impbDhcpSnoopingIpAddress }
::= { impbDhcpSnoopingTable 1 }
ImpbDhcpSnoopingEntry ::=
SEQUENCE {
impbDhcpSnoopingMacAddress
MacAddress,
impbDhcpSnoopingIpAddress
Ipv6Address,
impbDhcpSnoopingLeaseTime
Integer32,
impbDhcpSnoopingPort
Integer32
}
impbDhcpSnoopingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the DHCP snooping entry."
::= { impbDhcpSnoopingEntry 1 }
impbDhcpSnoopingIpAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address associated of the DHCP snooping entry."
DEFVAL { '00000000'H }
::= { impbDhcpSnoopingEntry 2 }
impbDhcpSnoopingLeaseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lease time associated of the DHCP snooping entry."
::= { impbDhcpSnoopingEntry 3 }
impbDhcpSnoopingPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number associated of the DHCP snooping entry."
::= { impbDhcpSnoopingEntry 4 }
impbRoamingState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding roaming state."
::= { securityIpMacPortBinding 9 }
impbVlanModeState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable / enable IP-MAC-Port Binding vlan mode state."
::= { securityIpMacPortBinding 10 }
impbVlanModeVlanList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP-MAC-Port Binding vlan mode VID list."
::= { securityIpMacPortBinding 11 }
impbLogState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), ipv4 (1), ipv6 (2), all (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP-MAC-Port Binding log state."
::= { securityIpMacPortBinding 12 }
impbDHCPv6PrefixDelegationSnoopState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure DHCPv6 PD snooping state."
::= { securityIpMacPortBinding 13 }
impbBindingtraplog OBJECT-TYPE
SYNTAX INTEGER {
disabled (2), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling topology change event trap in the system."
::= { securityIpMacPortBinding 14 }
impbBindingtrap OBJECT IDENTIFIER ::= { securityIpMacPortBinding 15 }
impbBindingtrapsign NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The object is for IMPB trap sign in the system."
::= {impbBindingtrap 1 }
impbAutoScanCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {
stop (0), scanning (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Auto scan status"
::= { securityIpMacPortBinding 16 }
-- ----------------------------------------------------------------
-- The STP Bridge Global
-- ----------------------------------------------------------------
stpBridgeGlobal OBJECT IDENTIFIER ::= { companySTP 1 }
stpModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { stpBridgeGlobal 1 }
stpProtocolVersion OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s."
DEFVAL { rstp }
::= { stpBridgeGlobal 2 }
stpBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { stpBridgeGlobal 3 }
stpTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
DEFVAL { 3 }
::= { stpBridgeGlobal 4 }
stpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {2000}
::= { stpBridgeGlobal 5 }
stpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { stpBridgeGlobal 6 }
stpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { stpBridgeGlobal 7 }
stpFowardBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling forward BPDU."
::= {stpBridgeGlobal 8 }
stpRootBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { stpBridgeGlobal 9 }
stpRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Root as seen
from this bridge."
::= { stpBridgeGlobal 10 }
stpMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { stpBridgeGlobal 11 }
stpForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state."
::= { stpBridgeGlobal 12 }
stpRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge."
::= { stpBridgeGlobal 13 }
stpTopologyChangeTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling topology change event
trap in the system."
DEFVAL { disabled }
::= { stpBridgeGlobal 14 }
stpNewRootTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling new root event
trap in the system."
DEFVAL { disabled }
::= { stpBridgeGlobal 15 }
stpNewRootTraps OBJECT IDENTIFIER ::= { stpBridgeGlobal 16 }
brgAddress NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion."
::= { stpNewRootTraps 1 }
oldDesignatedRoot NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node."
::= { stpNewRootTraps 2 }
mstiBridgeRegionalRoot NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"MSTI Regional Root Identifier value for the Instance."
::= { stpNewRootTraps 3 }
-- -------------------------------------
-- The Spanning Tree Port Table
-- -------------------------------------
stpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { companySTP 2 }
stpPortEntry OBJECT-TYPE
SYNTAX StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { stpPort }
::= { stpPortTable 1 }
StpPortEntry ::=
SEQUENCE {
stpPort
INTEGER,
stpPortStatus
INTEGER,
stpPortPriority
INTEGER,
stpAdminPortPathCost
INTEGER,
stpPortPathCost
INTEGER,
stpPortProtocolMigration
INTEGER,
stpPortEdge
INTEGER,
stpPortAdminP2P
INTEGER,
stpPortRestrictedRole
TruthValue,
stpPortRestrictedTCN
TruthValue,
stpPortHelloTime
Timeout,
stpPortState
INTEGER,
stpPortFowardBPDU
INTEGER
}
stpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { stpPortEntry 1 }
stpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts"
::= { stpPortEntry 2 }
stpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { stpPortEntry 3 }
stpAdminPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. Writing a value of '0' assigns the
automatically calculated default Path Cost value to
the ohter object stpPortPathCost. If the default
Path Cost is being used,this object returns '0' when
read."
REFERENCE
"IEEE 802.1D-2004"
::= { stpPortEntry 4 }
stpPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the CIST Root which include this port."
::= { stpPortEntry 5 }
stpPortProtocolMigration OBJECT-TYPE
SYNTAX INTEGER{
false(0),
true(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
::= { stpPortEntry 6 }
stpPortEdge OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(0),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This parameter when TRUE(1) indicates that detection of a port
as Edge Port happens automatically and FALSE(2)
indicates that this feature is disabled."
::= { stpPortEntry 7 }
stpPortAdminP2P OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { stpPortEntry 8 }
stpPortRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'."
::= {stpPortEntry 9}
stpPortRestrictedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently."
::= {stpPortEntry 10}
stpPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { stpPortEntry 11 }
stpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { stpPortEntry 12 }
stpPortFowardBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling forward BPDU."
REFERENCE
"IEEE 802.1D-2004"
::= { stpPortEntry 13 }
-- ----------------------------------------------------------------
-- The MST Configuration Identification
-- ----------------------------------------------------------------
mstConfigurationIdentification OBJECT IDENTIFIER ::= { companySTP 3 }
mstiConfigurationName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address."
::= { mstConfigurationIdentification 1 }
mstiRevisionLevel OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstConfigurationIdentification 2 }
-- -----------------------------------------------------------------
-- Future Mst VlanId to Instance Mapping Table : CIST
-- -----------------------------------------------------------------
mstCistVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { mstConfigurationIdentification 3 }
mstCistVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstConfigurationIdentification 4 }
mstCistVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstConfigurationIdentification 5 }
mstCistVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstConfigurationIdentification 6 }
-- -----------------------------------------------------------------
-- Future Mst VlanId to Instance Mapping Table : MSTI
-- -----------------------------------------------------------------
mstVlanMstiMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstVlanMstiMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MSTP.
This table maintains context ID as one more index to
support Multiple Instances."
::= { mstConfigurationIdentification 7 }
mstVlanMstiMappingEntry OBJECT-TYPE
SYNTAX MstVlanMstiMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceIndex }
::= { mstVlanMstiMappingTable 1 }
MstVlanMstiMappingEntry ::=
SEQUENCE {
mstInstanceIndex
Integer32,
mstSetVlanList
OCTET STRING,
mstResetVlanList
OCTET STRING,
mstInstanceVlanMapped
OCTET STRING,
mstInstanceVlanMapped2k
OCTET STRING,
mstInstanceVlanMapped3k
OCTET STRING,
mstInstanceVlanMapped4k
OCTET STRING
}
mstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance."
::= { mstVlanMstiMappingEntry 1 }
mstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { mstVlanMstiMappingEntry 2 }
mstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { mstVlanMstiMappingEntry 3 }
mstInstanceVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { mstVlanMstiMappingEntry 4 }
mstInstanceVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 5 }
mstInstanceVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 6 }
mstInstanceVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
stpInstance OBJECT IDENTIFIER ::= { companySTP 4 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table : CIST
-- -----------------------------------------------------------------
mstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { stpInstance 1 }
mstCistStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { stpInstance 2 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table : MSTI
-- -----------------------------------------------------------------
mstMstiBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances."
::= { stpInstance 3 }
mstMstiBridgeEntry OBJECT-TYPE
SYNTAX MstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { mstMstiInstanceIndex }
::= { mstMstiBridgeTable 1 }
MstMstiBridgeEntry ::=
SEQUENCE {
mstMstiInstanceIndex
Integer32,
mstMstiBridgePriority
Integer32,
mstMstiStatus
INTEGER
}
mstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { mstMstiBridgeEntry 1 }
mstMstiBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { mstMstiBridgeEntry 2 }
mstMstiStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { mstMstiBridgeEntry 3 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
stpInstancePortTable OBJECT IDENTIFIER ::= { companySTP 5 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : CIST
-- -----------------------------------------------------------------
mstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { stpInstancePortTable 1 }
mstCistPortEntry OBJECT-TYPE
SYNTAX MstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { mstCistPort }
::= { mstCistPortTable 1 }
MstCistPortEntry ::=
SEQUENCE {
mstCistPort
Integer32,
mstCistPortDesignatedBridge
BridgeId,
mstCistPortAdminPathCost
Integer32,
mstCistPortPathCost
Integer32,
mstCistPortPriority
Integer32,
mstCistForcePortState
INTEGER,
mstCistCurrentPortRole
INTEGER
}
mstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { mstCistPortEntry 1 }
mstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { mstCistPortEntry 2 }
mstCistPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstCistPortEntry 3 }
mstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstCistPortEntry 4 }
mstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { mstCistPortEntry 5 }
mstCistForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'fsMIMstCistForcePortState' is set to 'enabled' for this port"
::= { mstCistPortEntry 6 }
mstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { mstCistPortEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : MSTI
-- -----------------------------------------------------------------
mstMstiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { stpInstancePortTable 2 }
mstMstiPortEntry OBJECT-TYPE
SYNTAX MstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { mstMstiPort, mstInstanceIndex }
::= { mstMstiPortTable 1 }
MstMstiPortEntry ::=
SEQUENCE {
mstMstiPort
Integer32,
mstMstiPortDesignatedBridge
BridgeId,
mstMstiPortAdminPathCost
Integer32,
mstMstiPortPathCost
Integer32,
mstMstiPortPriority
Integer32,
mstMstiForcePortState
INTEGER,
mstMstiCurrentPortRole
INTEGER
}
mstMstiPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { mstMstiPortEntry 1 }
mstMstiPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { mstMstiPortEntry 2 }
mstMstiPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstMstiPortEntry 3 }
mstMstiPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstMstiPortEntry 4 }
mstMstiPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { mstMstiPortEntry 5 }
mstMstiForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'fsMIMstCistForcePortState' is set to 'enabled' for this port"
::= { mstMstiPortEntry 6 }
mstMstiCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { mstMstiPortEntry 7 }
-- ------------------------------------------------------------------
-- The Static Multicast Group
-- ------------------------------------------------------------------
staticMcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticMcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Static MACs"
::= { companyStaticMcast 1 }
staticMcastEntry OBJECT-TYPE
SYNTAX StaticMcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Static MAC entry containing the mac and forwarding port."
INDEX { staticMcastVlanID, staticMcastMac, staticMcastEgressPorts, staticMcastIpAddr}
::= { staticMcastTable 1 }
StaticMcastEntry ::= SEQUENCE {
staticMcastVlanID INTEGER,
staticMcastMac MacAddress,
staticMcastEgressPorts PortList,
staticMcastIpAddr IpAddress,
staticMcastStatus RowStatus
}
staticMcastVlanID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the static MAC entry."
::= { staticMcastEntry 1 }
staticMcastMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the static MAC entry."
::= { staticMcastEntry 2 }
staticMcastEgressPorts OBJECT-TYPE
SYNTAX PortList (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { staticMcastEntry 3 }
staticMcastIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Static Multicast IP Address."
::= { staticMcastEntry 4 }
staticMcastStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Static Mcast Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { staticMcastEntry 5 }
-- ----------------------------------------------------------
-- The 802.1Q VLAN Groups
-- ----------------------------------------------------------
dot1qVlanManagementOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable management VLAN mechanism."
::= { companyDot1qVlanGroup 2 }
dot1qVlanManagementid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management VLAN ID, which will allow to forward packets of that VLAN to CPU."
DEFVAL { 1 }
::= { companyDot1qVlanGroup 3 }
dot1qVlanAsyOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1Q Asymmetric VLAN"
::= { companyDot1qVlanGroup 5 }
-- -------------------------------------------------------------
-- The VLAN Database
-- -------------------------------------------------------------
dot1qVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { companyDot1qVlanGroup 6 }
dot1qVlanEntry OBJECT-TYPE
SYNTAX Dot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a VLAN configured into the
device by (local or network) management."
INDEX { dot1qVlanName }
::= { dot1qVlanTable 1 }
Dot1qVlanEntry ::=
SEQUENCE {
dot1qVlanName
SnmpAdminString,
dot1qVlanEgressPorts
PortList,
dot1qVlanForbiddenPorts
PortList,
dot1qVlanUntaggedPorts
PortList,
dot1qVlanAdvertisementStatus
INTEGER,
dot1qVlanRowStatus
RowStatus
}
dot1qVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the VLAN."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 1 }
dot1qVlanEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { dot1qVlanEntry 2 }
dot1qVlanForbiddenPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports which are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port per-VLAN Registrar
control for Registration Forbidden for the relevant GVRP
state machine on each port. A port may not be added in
this set if it is already a member of the set of ports
in dot1qVlanEgressPorts. The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { dot1qVlanEntry 3 }
dot1qVlanUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 4 }
dot1qVlanAdvertisementStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN."
::= { dot1qVlanEntry 5 }
dot1qVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in dot1qVlanTable. By setting this object, new
entries can be created in dot1qVlanTable and existing entries can be
removed from dot1qVlanTable. It can be used as specified in the SNMP
v2 standard."
::= { dot1qVlanEntry 6 }
-- -------------------------------------------------------------
-- The VLAN Port Configuration Table
-- -------------------------------------------------------------
dot1qVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port control and status
information for VLAN configuration in the device."
::= { companyDot1qVlanGroup 7 }
dot1qVlanPortEntry OBJECT-TYPE
SYNTAX Dot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling VLAN configuration for a port
on the device."
AUGMENTS { dot1dBasePortEntry }
::= { dot1qVlanPortTable 1 }
Dot1qVlanPortEntry ::=
SEQUENCE {
dot1qVlanPvid
VlanIndex
}
dot1qVlanPvid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.1"
DEFVAL { 1 }
::= { dot1qVlanPortEntry 1 }
-- -------------------------------------------------------------
-- The VLAN Ungister Multicast Filter Table
-- -------------------------------------------------------------
dot1qVlanUngisterMCFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanUngisterMCFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { companyDot1qVlanGroup 8 }
dot1qVlanUngisterMCFilterEntry OBJECT-TYPE
SYNTAX Dot1qVlanUngisterMCFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter mode information for each VLAN ID."
INDEX { dot1qVlanUngisterMCFilterVlanId }
::= { dot1qVlanUngisterMCFilterTable 1 }
Dot1qVlanUngisterMCFilterEntry ::= SEQUENCE {
dot1qVlanUngisterMCFilterVlanId Integer32,
dot1qVlanUngisterMCFiltermode INTEGER
}
dot1qVlanUngisterMCFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Per Vlan to configure multicast filtering function."
::= { dot1qVlanUngisterMCFilterEntry 1 }
dot1qVlanUngisterMCFiltermode OBJECT-TYPE
SYNTAX INTEGER {forwardall(2), filter(1), forward(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter unknown multicast frames or normal operation(i.e. forwarding)"
::= { dot1qVlanUngisterMCFilterEntry 2 }
dot1qVlanPVIDAutoAssignOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable VLAN PVID auto assignment"
::= { companyDot1qVlanGroup 9 }
-- ----------------------------------------------------------
-- The GVRP Groups
-- ----------------------------------------------------------
gvrpGVRPGlobalSettingsOnOff OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GVRP mechanism."
::= { companyGVRPGroup 1 }
gvrpSettingsJoinTime OBJECT-TYPE
SYNTAX INTEGER (100..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Join Time value assigned to this Join Time field.
This 16-bit value is read-write."
::= { companyGVRPGroup 2 }
gvrpSettingsLeaveTime OBJECT-TYPE
SYNTAX INTEGER (100..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Leave Time value assigned to this Leave Time field.
This 16-bit value is read-write."
::= { companyGVRPGroup 3 }
gvrpSettingsLeaveAllTime OBJECT-TYPE
SYNTAX INTEGER (100..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Leave_All Time value assigned to this Leave_All Time field.
This 16-bit value is read-write."
::= { companyGVRPGroup 4 }
-- GRVP Port Setting Table
--
gvrpSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GvrpSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each GVRP configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { companyGVRPGroup 5 }
gvrpSettingsEntry OBJECT-TYPE
SYNTAX GvrpSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a GVRP configured into the
device by (local or network) management."
INDEX { gvrpSettingsPortControlIndex }
::= { gvrpSettingsTable 1 }
GvrpSettingsEntry ::=
SEQUENCE {
gvrpSettingsPortControlIndex
InterfaceIndex,
gvrpSettingsPVID
INTEGER,
gvrpSettingsGVRPState
INTEGER,
gvrpSettingsIngressChecking
INTEGER,
gvrpSettingsAcceptableFrameType
INTEGER
}
gvrpSettingsPortControlIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port."
::= { gvrpSettingsEntry 1 }
gvrpSettingsPVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { gvrpSettingsEntry 2 }
gvrpSettingsGVRPState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GVRP State to this Aggregation Port."
::= { gvrpSettingsEntry 3 }
gvrpSettingsIngressChecking OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Ingress Checking mechanism of GVRP to this Aggregation Port."
::= { gvrpSettingsEntry 4 }
gvrpSettingsAcceptableFrameType OBJECT-TYPE
SYNTAX INTEGER {
allFrames(1),
taggedOnly(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chose types All Frames/Tagged to this Aggregation Port."
::= { gvrpSettingsEntry 5 }
-- ----------------------------------------------------------
-- The DHCP/BOOTP Relay
-- ----------------------------------------------------------
dhcpBOOTPRelayControl OBJECT IDENTIFIER ::= { companyDHCPRelay 1 }
dhcpBOOTPRelayManagement OBJECT IDENTIFIER ::= { companyDHCPRelay 2 }
dhcpBOOTPRelayManagementOption82 OBJECT IDENTIFIER ::= { dhcpBOOTPRelayManagement 2 }
-- The DHCP/BOOTP Relay Control
dhcpBOOTPRelayState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay function is enabled or disabled."
::= { dhcpBOOTPRelayControl 1 }
dhcpBOOTPRelayHopCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of router hops that the BOOTP packets can cross."
::= { dhcpBOOTPRelayControl 2 }
dhcpBOOTPRelayTimeThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the minimum time in seconds within which the switch must relay the DHCP request.
If this time is exceeded, the switch will drop the DHCP packet."
::= { dhcpBOOTPRelayControl 3 }
dhcpBOOTPRelayEnablePortlist OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay function is enabled or disabled by portlist."
::= { dhcpBOOTPRelayControl 4 }
dhcpRelayVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPRelayVlanSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (relay) DHCP packets to."
::= { dhcpBOOTPRelayControl 5 }
dhcpRelayVlanTableEntry OBJECT-TYPE
SYNTAX DHCPRelayVlanSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (relay) DHCP packets to."
INDEX { dhcpRelayVlanSettingsVLANID }
::= { dhcpRelayVlanTable 1 }
DHCPRelayVlanSettings ::=
SEQUENCE {
dhcpRelayVlanSettingsVLANID
INTEGER,
dhcpRelayVlanSettingsState
INTEGER
}
dhcpRelayVlanSettingsVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the current VLAN ID of the device."
::= { dhcpRelayVlanTableEntry 1 }
dhcpRelayVlanSettingsState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay function of VLAN is enabled or disabled."
::= { dhcpRelayVlanTableEntry 2 }
-- The DHCP/BOOTP Relay Management
-- The DHCP/BOOTP Relay Interface Settings Table
dhcpBOOTPRelayInterfaceSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPBOOTPRelayInterfaceSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (relay) DHCP packets to."
::= { dhcpBOOTPRelayManagement 1 }
dhcpBOOTPRelayInterfaceSettingsEntry OBJECT-TYPE
SYNTAX DHCPBOOTPRelayInterfaceSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (relay) DHCP packets to."
INDEX { dhcpBOOTPRelayInterface, dhcpBOOTPRelayServerIP}
::= { dhcpBOOTPRelayInterfaceSettingsTable 1 }
DHCPBOOTPRelayInterfaceSettings ::=
SEQUENCE {
dhcpBOOTPRelayInterface
DisplayString,
dhcpBOOTPRelayServerIP
IpAddress,
dhcpBOOTPRelayInterfaceSettingsRowStatus
RowStatus
}
dhcpBOOTPRelayInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the IP interface."
::= { dhcpBOOTPRelayInterfaceSettingsEntry 1 }
dhcpBOOTPRelayServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DHCP server IP address."
::= { dhcpBOOTPRelayInterfaceSettingsEntry 2 }
dhcpBOOTPRelayInterfaceSettingsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { dhcpBOOTPRelayInterfaceSettingsEntry 3 }
-- The DHCP/BOOTP Relay Management
-- The DHCP/BOOTP Relay Option82
dhcpBOOTPRelayOption82State OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay option 82 function is enabled or disabled."
::= { dhcpBOOTPRelayManagementOption82 1 }
dhcpBOOTPRelayOption82CheckState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay option 82 Check function is enabled or disabled."
::= { dhcpBOOTPRelayManagementOption82 2 }
dhcpBOOTPRelayOption82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(1),
drop(2),
keep(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay option 82 policy."
::= { dhcpBOOTPRelayManagementOption82 3 }
dhcpBOOTPRelayOption82RemoteIDType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
userdefined(2),
userdefinedhex(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of remote ID.
If the type is default, the remote ID will be the MAC address of the device, otherwise,
the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object."
::= { dhcpBOOTPRelayManagementOption82 4 }
dhcpBOOTPRelayOption82RemoteID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object displays the current remote ID of the device.
If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device,
and this object cannot be modified.
If swDHCPRelayOption82RemoteIDType is set to user-defined or user-defined-hex, a new value can be written to this object."
::= { dhcpBOOTPRelayManagementOption82 5 }
dhcpBOOTPRelayOption82CircuitIDType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
userdefined(2),
userdefinedhex(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of remote ID.
If the type is default, the circuit ID will be blank, otherwise,
the circuit ID can be defined by writing to the dhcpBOOTPRelayOption82CircuitID object."
::= { dhcpBOOTPRelayManagementOption82 7 }
dhcpBOOTPRelayOption82CircuitID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object displays the current remote ID of the device.
If dhcpBOOTPRelayOption82CircuitIDType is set to default, the value will be the MAC address of the device,
and this object cannot be modified.
If dhcpBOOTPRelayOption82CircuitIDType is set to user-defined or user-defined-hex, a new value can be written to this object."
::= { dhcpBOOTPRelayManagementOption82 8 }
-- ----------------------------------------------------------
-- The DHCP LocalRelay
-- ----------------------------------------------------------
-- The DHCP Local Relay Table
dhcpLocalRelayGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP local relay function of VLAN is enabled or disabled."
::= { companyDHCPLocalRelay 1 }
dhcpLocalRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPLocalRelaySettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (local relay) DHCP packets to."
::= { companyDHCPLocalRelay 2 }
dhcpLocalRelayTableEntry OBJECT-TYPE
SYNTAX DHCPLocalRelaySettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (local relay) DHCP packets to."
INDEX { dhcpLocalRelaySettingsVLANID }
::= { dhcpLocalRelayTable 1 }
DHCPLocalRelaySettings ::=
SEQUENCE {
dhcpLocalRelaySettingsVLANID
INTEGER,
dhcpLocalRelaySettingsState
INTEGER
}
dhcpLocalRelaySettingsVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the current VLAN ID of the device."
::= { dhcpLocalRelayTableEntry 1 }
dhcpLocalRelaySettingsState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP local relay function of VLAN is enabled or disabled."
::= { dhcpLocalRelayTableEntry 2 }
dhcpLocalRelayEnablePortlist OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP local relay function is enabled or disabled by portlist."
::= { companyDHCPLocalRelay 3 }
-- ---------------------------------------------------------------------
-- LA Function
-- ---------------------------------------------------------------------
laSystem OBJECT IDENTIFIER ::= { companyLA 1 }
laPortControl OBJECT IDENTIFIER ::= { companyLA 2 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
PortLaMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines how a Port Channel does channeling.
lacp(1) - place the port into passive
negotiation state, in which the
port waits for its peer to
initiate negotiation.
static(2) - force the port to enable
channeling.
disable(3) - channeling is disabled."
SYNTAX INTEGER {
lacp(1),
static(2),
disable(3)
}
LacpKey ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor or Partner Key value (0..65535)."
SYNTAX Integer32 (0..65535)
-- ------------------------------------------------------------------
-- The La System Group
-- ------------------------------------------------------------------
laStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Link Aggregation Module administrative status as
enabled or disabled."
::= { laSystem 2 }
--
-- Port Channel Table
--
laPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel."
::= { laSystem 3 }
laPortChannelEntry OBJECT-TYPE
SYNTAX LaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port."
INDEX { laPortChannelIfIndex }
::= { laPortChannelTable 1 }
LaPortChannelEntry ::=
SEQUENCE {
laPortChannelIfIndex InterfaceIndex,
laPortChannelMemberList PortList,
laPortChannelMode PortLaMode
-- start CAMEO_LA_MASTER_PORT_WANTED
,
laPortChannelMasterPort InterfaceIndex
-- end CAMEO_LA_MASTER_PORT_WANTED
}
laPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port-channel(Aggregator's
interface index). "
::= { laPortChannelEntry 1 }
laPortChannelMemberList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Member Port list of the port channel. Add the ports as a
aggregation member associated of a port-channel."
::= { laPortChannelEntry 2 }
laPortChannelMode OBJECT-TYPE
SYNTAX PortLaMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current Operating Channel Mode of the port channel
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled."
::= { laPortChannelEntry 3 }
-- start CAMEO_LA_MASTER_PORT_WANTED
laPortChannelMasterPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master port of the port-channel. "
::= { laPortChannelEntry 4 }
-- end CAMEO_LA_MASTER_PORT_WANTED
-- ------------------------------------------------------------------
-- The La Algorithm Group
-- ------------------------------------------------------------------
laAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
sourceMAC(1),
destMAC(2),
sourceAndDestMAC(3),
sourceIP(4),
destIP(5),
sourceAndDestIP(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Link Aggregation load balance algorithm."
::= { laSystem 4 }
--
-- LA Port Control Table
--
laPortControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaPortControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port."
::= { laPortControl 1 }
laPortControlEntry OBJECT-TYPE
SYNTAX LaPortControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device."
INDEX { laPortControlIndex }
::= { laPortControlTable 1 }
LaPortControlEntry ::=
SEQUENCE {
laPortControlIndex
InterfaceIndex,
laPortActorPortPriority
INTEGER,
laPortActorActivity
INTEGER,
laPortActorTimeout
INTEGER
}
laPortControlIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port."
::= { laPortControlEntry 1 }
laPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { laPortControlEntry 2 }
laPortActorActivity OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates LACP_Activity to this Aggregation Port.
LACP can be configured in one of two modes: active or passive.
In active mode it will always send frames along the configured links.
If the actor and partner are both in passive mode, they do not
exchange LACP packets."
::= { laPortControlEntry 3 }
laPortActorTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates LACP_Timeout to this Aggregation Port.
short(1) - LACP Timeout 3 seconds.
long (2) - LACP Timeout 90 seconds."
::= { laPortControlEntry 4 }
-- ----------------------------------------------------------------
-- The STATIC MAC group
-- ----------------------------------------------------------------
staticVlanBaseTable OBJECT IDENTIFIER ::= { companyStaticMAC 5 }
staticDisableAutoLearn OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set on to disable Auto Learning Excluding Uplink Port and
set off to enable Auto Learning."
::= { companyStaticMAC 1 }
staticAutoLearningList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of the device's member ports that belong
to the Static MAC auto learning enable/disable.
For example, when Disable Auto Learning is enable,
the octet value set up as '# 0x0F 0xFF 0xFF 0xFF' means
from port 1 to port 4 are not in auto learning state,
the other ports are in auto learning state. It can be
set up when Disable Auto Learning is enable."
::= { companyStaticMAC 2 }
staticTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Static MACs"
::= { companyStaticMAC 3 }
staticEntry OBJECT-TYPE
SYNTAX StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Static MAC entry containing the mac and forwarding port."
INDEX { staticVlanID, staticMac,staticPort}
::= { staticTable 1 }
StaticEntry ::= SEQUENCE {
staticVlanID INTEGER,
staticMac MacAddress,
staticPort INTEGER,
staticStatus RowStatus
}
staticVlanID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the static MAC entry."
::= { staticEntry 1 }
staticMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the static MAC entry."
::= { staticEntry 2 }
staticPort OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarding port of the static MAC entry.
For all machines give maximum port number."
::= { staticEntry 3 }
staticStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. The trunk member port can not set up static MAC."
::= { staticEntry 4 }
autoFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF AutoFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Auto Fdb"
::= { companyStaticMAC 4 }
autoFdbEntry OBJECT-TYPE
SYNTAX AutoFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A auto fdb entry containing the ipaddress"
INDEX { autoFdbIPAddress}
::= { autoFdbTable 1 }
AutoFdbEntry ::=
SEQUENCE {
autoFdbIPAddress IpAddress,
autoFdbVlanID Integer32,
autoFdbMacAddress MacAddress,
autoFdbPort INTEGER,
autoFdbTimeStamp Integer32,
autoFdbStatus RowStatus
}
autoFdbIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IpAddress of the autoFdbEntry."
::= { autoFdbEntry 1 }
autoFdbVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VlanID of the autoFdbEntry."
::= { autoFdbEntry 2 }
autoFdbMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac Address of the autoFdbEntry."
::= { autoFdbEntry 3 }
autoFdbPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port of the autoFdbEntry."
::= { autoFdbEntry 4 }
autoFdbTimeStamp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Time Stamp of the autoFdbEntry."
::= { autoFdbEntry 5 }
autoFdbStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Auto Fdb Table. Only a subset
of the rowstatus variables (createAndGo, createAndWait,destroy)
are available."
::= { autoFdbEntry 6 }
staticVlanBaseAutoLearnList1k OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this Auto Learn,
the bit corresponding to that VLAN is set to '1'.
Write AutoLearnList1k use 256 character, and conform
to the foregoing rules."
::= { staticVlanBaseTable 1 }
staticVlanBaseAutoLearnList2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this Auto Learn.
Write AutoLearnList2k use 256 character, and conform
to the foregoing rules."
::= { staticVlanBaseTable 2 }
staticVlanBaseAutoLearnList3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this Auto Learn
the bit corresponding to that VLAN is set to '1'.
Write AutoLearnList3k use 256 character, and conform
to the foregoing rules."
::= { staticVlanBaseTable 3 }
staticVlanBaseAutoLearnList4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4094.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this Auto Learn
the bit corresponding to that VLAN is set to '1'.
Write AutoLearnList4k use 256 character, and conform
to the foregoing rules."
::= { staticVlanBaseTable 4 }
staticVlanBaseEnableAutoLearn OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set enable vlan list to auto learn, and range 1-4094."
::= { staticVlanBaseTable 5 }
staticVlanBaseDisableAutoLearn OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set disable vlan list to auto learn, and range 1-4094."
::= { staticVlanBaseTable 6 }
-- ---------------------------------------------------------------------
-- IGMP Snooping Function
-- ---------------------------------------------------------------------
igsSystem OBJECT IDENTIFIER ::= { companyIgsGroup 1 }
igsVlan OBJECT IDENTIFIER ::= { companyIgsGroup 3 }
igsAccessAuth OBJECT IDENTIFIER ::= { companyIgsGroup 5 }
-- start IGMP_SNOOPING_HOST_BASED_FAST_LEAVE
igsHost OBJECT IDENTIFIER ::= { companyIgsGroup 6 }
-- end IGMP_SNOOPING_HOST_BASED_FAST_LEAVE
igsStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations."
DEFVAL { 2 }
::= { igsSystem 1 }
igsRouterPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted."
DEFVAL { 260 }
::= { igsSystem 2 }
igsHostPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (130..153025)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group."
DEFVAL {260}
::= { igsSystem 3 }
igsDataDrivenLearningMaxLearnedEntryVlaue OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum data driven learning entry value."
DEFVAL { 64 }
::= { igsSystem 8 }
igsReportToAllPort OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module forwards packets
to report to all port.
When set to 'disabled', the IGS module forwards packets
to router port only."
DEFVAL { 2 }
::= { igsSystem 9 }
-- VLAN Based MAC Multicast Forwarding Table
--
-- igsVlanMcastMacFwdTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgsVlanMcastMacFwdEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table contains MAC based multicast forwarding
-- information. This information is applicable only if
-- the 'igsVlanMcastForwardingMode' is set to 'macbased' "
-- ::= { igsVlan 1 }
--
-- igsVlanMcastMacFwdEntry OBJECT-TYPE
-- SYNTAX IgsVlanMcastMacFwdEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table contains VLAN ID, multicast group MAC address and the
-- list of ports onto which the multicast data packets for group
-- should be forwarded."
--
-- INDEX { igsVlanMcastMacFwdVlanId,
-- igsVlanMcastMacFwdGroupAddress }
-- ::= { igsVlanMcastMacFwdTable 1 }
--
-- IgsVlanMcastMacFwdEntry ::= SEQUENCE {
-- igsVlanMcastMacFwdVlanId Integer32,
-- igsVlanMcastMacFwdGroupAddress MacAddress,
-- igsVlanMcastMacFwdPortList PortList
-- }
--
-- igsVlanMcastMacFwdVlanId OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "VLAN ID pertaining to the Multicast forwarding entry"
-- ::= { igsVlanMcastMacFwdEntry 1 }
--
-- igsVlanMcastMacFwdGroupAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Multicast group MAC address."
-- ::= { igsVlanMcastMacFwdEntry 2 }
--
--
-- igsVlanMcastMacFwdPortList OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "List of ports onto which the multicast data
-- packets destined for this group will be forwarded."
-- ::= { igsVlanMcastMacFwdEntry 3 }
-- VLAN based router table.
igsVlanRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { igsVlan 3 }
igsVlanRouterEntry OBJECT-TYPE
SYNTAX IgsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the VLAN ID and list of ports on which
routers are present in the VLAN."
INDEX { igsVlanRouterVlanId }
::= { igsVlanRouterTable 1 }
IgsVlanRouterEntry ::= SEQUENCE {
igsVlanRouterVlanId Integer32,
igsVlanRouterPortList PortList
}
igsVlanRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the ports through which router is reachable."
::= { igsVlanRouterEntry 1 }
igsVlanRouterPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { igsVlanRouterEntry 2 }
-- VLAN based filter table
igsVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { igsVlan 4 }
igsVlanFilterEntry OBJECT-TYPE
SYNTAX IgsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { igsVlanFilterVlanId }
::= { igsVlanFilterTable 1 }
IgsVlanFilterEntry ::= SEQUENCE {
igsVlanFilterVlanId Integer32,
igsVlanSnoopStatus INTEGER,
igsVlanQuerier INTEGER,
igsVlanCfgQuerier INTEGER,
igsVlanQueryInterval Integer32,
igsVlanRtrPortList PortList
,igsVlanFbdRtrPortList PortList
, igsVlanFastLeave INTEGER
, igsVlanDataDrivenLearningStatus INTEGER
, igsVlanQuerierVersionStatus INTEGER
, igsVlanDataDrivenLearningAgeOutStatus INTEGER
, igsVlanReportSuppression INTEGER
, igsVlanRobustnessValue Integer32
, igsVlanGrpQueryInterval Integer32
, igsVlanQueryMaxResponseTime INTEGER
}
igsVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done."
::= { igsVlanFilterEntry 1 }
igsVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable IGS function on a specific VLAN."
DEFVAL { 1 }
::= { igsVlanFilterEntry 2 }
igsVlanQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { 2 }
::= { igsVlanFilterEntry 3 }
igsVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries."
DEFVAL { 2 }
::= { igsVlanFilterEntry 4 }
igsVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network."
DEFVAL { 125 }
::= { igsVlanFilterEntry 5 }
igsVlanRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports"
::= { igsVlanFilterEntry 6 }
igsVlanFbdRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which can be configured statically as forbidden router ports."
::= { igsVlanFilterEntry 7 }
igsVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { 2 }
::= { igsVlanFilterEntry 8 }
igsVlanDataDrivenLearningStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable
Data Driven Learning function on a specific VLAN."
::= { igsVlanFilterEntry 9 }
igsVlanQuerierVersionStatus OBJECT-TYPE
SYNTAX INTEGER { igmp-v3(3), igmp-v2(2), igmp-v1(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable
Querier Version function on a specific VLAN."
::= { igsVlanFilterEntry 10 }
igsVlanDataDrivenLearningAgeOutStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable
Data Driven Learning Age Out State on a specific VLAN."
::= { igsVlanFilterEntry 11 }
igsVlanReportSuppression OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Report suppression in the system."
::= { igsVlanFilterEntry 12 }
igsVlanRobustnessValue OBJECT-TYPE
SYNTAX Integer32 (2..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number of queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'igsRobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { igsVlanFilterEntry 13 }
igsVlanGrpQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there is any intersted receivers. The switch will send
'igsRobustnessValue' queries before removing the port from the
group membership information in the forwarding database."
DEFVAL { 1 }
::= { igsVlanFilterEntry 14 }
igsVlanQueryMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (10..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised in IGMPv2 general
queries on this interface."
DEFVAL { 10 }
::= { igsVlanFilterEntry 15 }
-- VLAN Based IGMP Snooping Group
igsVlanMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC based multicast forwarding
information."
::= { igsVlan 5 }
igsVlanMulticastGroupEntry OBJECT-TYPE
SYNTAX IgsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded."
INDEX { igsVlanMulticastGroupVlanId,
igsVlanMulticastGroupIpAddress }
::= { igsVlanMulticastGroupTable 1 }
IgsVlanMulticastGroupEntry ::= SEQUENCE {
igsVlanMulticastGroupVlanId Integer32,
igsVlanMulticastGroupIpAddress InetAddress,
igsVlanMulticastGroupMacAddress MacAddress,
igsVlanMulticastGroupPortList PortList
}
igsVlanMulticastGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { igsVlanMulticastGroupEntry 1 }
igsVlanMulticastGroupIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format."
::= { igsVlanMulticastGroupEntry 2 }
igsVlanMulticastGroupMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format."
::= { igsVlanMulticastGroupEntry 3 }
igsVlanMulticastGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this group will be forwarded."
::= { igsVlanMulticastGroupEntry 4 }
igsAccessAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP Authentication
function of the switch."
::= { igsAccessAuth 1 }
igsAccessAuthEntry OBJECT-TYPE
SYNTAX IgsAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains management entities for IGMP Authentication
function."
INDEX { igsAccessAuthPortIndex }
::= { igsAccessAuthTable 1 }
IgsAccessAuthEntry ::= SEQUENCE {
igsAccessAuthPortIndex Integer32,
igsAccessAuthState INTEGER
}
igsAccessAuthPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index of igsAccessAuthTable which
indicates the port to be configured."
::= { igsAccessAuthEntry 1 }
igsAccessAuthState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be configured to set IGMP Authentication
state to enabled/disabled on each port."
::= { igsAccessAuthEntry 2 }
-- start IGMP_SNOOPING_HOST_BASED_FAST_LEAVE
igsHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage
the IGMP Host based Fast Leave function of the switch."
::= { igsHost 1 }
igsHostEntry OBJECT-TYPE
SYNTAX IgsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains management entities for
IGMP Host based fast leave function."
INDEX {igsHostTableVLANID,
igsHostTableGroupAddress,
igsHostTablePort,
igsHostTableHostIPAddress}
::= { igsHostTable 1 }
IgsHostEntry ::= SEQUENCE {
igsHostTableVLANID Integer32,
igsHostTableGroupAddress InetAddress,
igsHostTablePort Integer32,
igsHostTableHostIPAddress InetAddress
}
igsHostTableVLANID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of Host table entry."
::= { igsHostEntry 1 }
igsHostTableGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of Host table entry."
::= { igsHostEntry 2 }
igsHostTablePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number of Host table entry.
For all machines give maximum port number."
::= { igsHostEntry 3 }
igsHostTableHostIPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host IP address of Group in Host table entry."
::= { igsHostEntry 4 }
-- end IGMP_SNOOPING_HOST_BASED_FAST_LEAVE
-- ---------------------------------------------------------------------
-- MLD Snooping Function
-- ---------------------------------------------------------------------
mldsSystem OBJECT IDENTIFIER ::= { companyMldsGroup 1 }
mldsVlan OBJECT IDENTIFIER ::= { companyMldsGroup 3 }
mldsHost OBJECT IDENTIFIER ::= { companyMldsGroup 4 }
mldsStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables MLD snooping in the system.
When set to 'enabled', the MLDS module starts
protocol operations.
When set to 'disabled', the MLDS module stops performing
protocol operations."
DEFVAL { 2 }
::= { mldsSystem 1 }
mldsRouterPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted."
DEFVAL { 260 }
::= { mldsSystem 2 }
mldsHostPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (130..153025)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group."
DEFVAL {260}
::= { mldsSystem 3 }
mldsDataDrivenLearningMaxLearnedEntryVlaue OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum data driven learning entry value."
DEFVAL { 64 }
::= { mldsSystem 8 }
-- VLAN based router table.
mldsVlanRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { mldsVlan 3 }
mldsVlanRouterEntry OBJECT-TYPE
SYNTAX MldsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the VLAN ID and list of ports on which
routers are present in the VLAN."
INDEX { mldsVlanRouterVlanId }
::= { mldsVlanRouterTable 1 }
MldsVlanRouterEntry ::= SEQUENCE {
mldsVlanRouterVlanId Integer32,
mldsVlanRouterPortList PortList
}
mldsVlanRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the ports through which router is reachable."
::= { mldsVlanRouterEntry 1 }
mldsVlanRouterPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { mldsVlanRouterEntry 2 }
-- VLAN based filter table
mldsVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { mldsVlan 4 }
mldsVlanFilterEntry OBJECT-TYPE
SYNTAX MldsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { mldsVlanFilterVlanId }
::= { mldsVlanFilterTable 1 }
MldsVlanFilterEntry ::= SEQUENCE {
mldsVlanFilterVlanId Integer32,
mldsVlanSnoopStatus INTEGER,
mldsVlanQuerier INTEGER,
mldsVlanCfgQuerier INTEGER,
mldsVlanQueryInterval Integer32,
mldsVlanRtrPortList PortList
, mldsVlanFbdRtrPortList PortList
, mldsVlanFastLeave INTEGER
, mldsVlanDataDrivenLearningStatus INTEGER
, mldsVlanReportSuppression INTEGER
, mldsVlanRobustnessValue Integer32
, mldsVlanGrpQueryInterval Integer32
, mldsVlanQueryMaxResponseTime INTEGER
}
mldsVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of MldsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in MldsVlanFilterEntry is to be done."
::= { mldsVlanFilterEntry 1 }
mldsVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable MLDS function on a specific VLAN."
DEFVAL { 1 }
::= { mldsVlanFilterEntry 2 }
mldsVlanQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { 2 }
::= { mldsVlanFilterEntry 3 }
mldsVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured as a querier via this object
to send out MLD general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries."
DEFVAL { 2 }
::= { mldsVlanFilterEntry 4 }
mldsVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network."
DEFVAL { 125 }
::= { mldsVlanFilterEntry 5 }
mldsVlanRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports"
::= { mldsVlanFilterEntry 6 }
mldsVlanFbdRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which can be configured statically as forbidden router ports."
::= { mldsVlanFilterEntry 7 }
mldsVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { 2 }
::= { mldsVlanFilterEntry 8 }
mldsVlanDataDrivenLearningStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable
Data Driven Learning function on a specific VLAN."
::= { mldsVlanFilterEntry 9 }
mldsVlanReportSuppression OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Report suppression in the system."
::= { mldsVlanFilterEntry 10 }
mldsVlanRobustnessValue OBJECT-TYPE
SYNTAX Integer32 (2..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number of queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'mldsRobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { mldsVlanFilterEntry 11 }
mldsVlanGrpQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there is any intersted receivers. The switch will send
'mldsRobustnessValue' queries before removing the port from the
group membership information in the forwarding database."
DEFVAL { 1 }
::= { mldsVlanFilterEntry 12 }
mldsVlanQueryMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (10..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised in MLDv1 general
queries on this interface."
DEFVAL { 10 }
::= { mldsVlanFilterEntry 13 }
-- VLAN Based MLD Snooping Group
mldsVlanMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC based multicast forwarding
information."
::= { mldsVlan 5 }
mldsVlanMulticastGroupEntry OBJECT-TYPE
SYNTAX MldsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded."
INDEX { mldsVlanMulticastGroupVlanId,
mldsVlanMulticastGroupIpAddress }
::= { mldsVlanMulticastGroupTable 1 }
MldsVlanMulticastGroupEntry ::= SEQUENCE {
mldsVlanMulticastGroupVlanId Integer32,
mldsVlanMulticastGroupIpAddress InetAddress,
mldsVlanMulticastGroupMacAddress MacAddress,
mldsVlanMulticastGroupPortList PortList
}
mldsVlanMulticastGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { mldsVlanMulticastGroupEntry 1 }
mldsVlanMulticastGroupIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format."
::= { mldsVlanMulticastGroupEntry 2 }
mldsVlanMulticastGroupMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format."
::= { mldsVlanMulticastGroupEntry 3 }
mldsVlanMulticastGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this group will be forwarded."
::= { mldsVlanMulticastGroupEntry 4 }
-- Host Table
mldsHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage
the IGMP Host based Fast Leave function of the switch."
::= { mldsHost 1 }
mldsHostEntry OBJECT-TYPE
SYNTAX MldsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains management entities for
IGMP Host based fast leave function."
INDEX {mldsHostTableVLANID,
mldsHostTableGroupAddress,
mldsHostTablePort,
mldsHostTableHostIPAddress}
::= { mldsHostTable 1 }
MldsHostEntry ::= SEQUENCE {
mldsHostTableVLANID Integer32,
mldsHostTableGroupAddress Ipv6Address,
mldsHostTablePort Integer32,
mldsHostTableHostIPAddress Ipv6Address
}
mldsHostTableVLANID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of IPv6 Host table entry."
::= { mldsHostEntry 1 }
mldsHostTableGroupAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of IPv6 Host table entry."
::= { mldsHostEntry 2 }
mldsHostTablePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number of IPv6 Host table entry.
For all machines give maximum port number."
::= { mldsHostEntry 3 }
mldsHostTableHostIPAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host IP address of Group in IPv6 Host table entry."
::= { mldsHostEntry 4 }
-- -------------------------------------------------------------
-- groups in the Auth MIB
-- -------------------------------------------------------------
swAuthenCtrl OBJECT IDENTIFIER ::= { companyAuthGroup 1 }
-- -----------------------------------------------------------------------------
-- swAuthenCtrl
-- -----------------------------------------------------------------------------
swAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Static 802.1x."
::= { swAuthenCtrl 1 }
swAuthMode OBJECT-TYPE
SYNTAX INTEGER {
portBase(1),
macBase(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the authentication mode of the device."
::= { swAuthenCtrl 2 }
authProtocol OBJECT-TYPE
SYNTAX INTEGER {
authProtocolRadiusEap(1),
authProtocolLocal(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication method used to authenticate users."
DEFVAL { authProtocolRadiusEap }
::= { swAuthenCtrl 3 }
-- start CAMEO_EAP_TRANSPARENT_FILTERING
swAuthCtrlPktFwdMode OBJECT-TYPE
SYNTAX INTEGER {
authForwardEap(1),
authDropEap(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When 802.1x disable, this item can decided eap packet be forward or drop."
DEFVAL { authForwardEap }
::= { swAuthenCtrl 4 }
-- end CAMEO_EAP_TRANSPARENT_FILTERING
-- -------------------------------------------------------------
-- groups in the Port Access Control MIB
-- -------------------------------------------------------------
swAuthPortAccessCtrl OBJECT IDENTIFIER ::= { companyAuthGroup 2 }
-- -----------------------------------------------------------------------------
-- swAuthPortAccessCtrl
-- -----------------------------------------------------------------------------
swAuthPortAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAuthPortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthPortAccessCtrl 1 }
swAuthPortAccessControlEntry OBJECT-TYPE
SYNTAX SwAuthPortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { swAuthAuthConfigPortNumber }
::= { swAuthPortAccessControlTable 1 }
SwAuthPortAccessControlEntry ::= SEQUENCE {
swAuthAuthConfigPortNumber INTEGER,
swAuthAuthQuietPeriod INTEGER,
swAuthAuthSuppTimeout INTEGER,
swAuthAuthServerTimeout INTEGER,
swAuthAuthMaxReq INTEGER,
swAuthAuthTxPeriod INTEGER,
swAuthAuthReAuthPeriod INTEGER,
swAuthAuthReAuthentication INTEGER,
swAuthAuthConfigPortControl INTEGER,
swAuthAuthCapability INTEGER,
swAuthAuthDirection INTEGER
}
swAuthAuthConfigPortNumber OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index.
Its value ranges between 1 and the value of port number.
For all machines give maximum port number."
::= { swAuthPortAccessControlEntry 1 }
swAuthAuthQuietPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine."
REFERENCE
"9.4.1, quietPeriod."
DEFVAL { 60 }
::= { swAuthPortAccessControlEntry 2 }
swAuthAuthSuppTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine."
REFERENCE
"9.4.1, suppTimeout."
DEFVAL { 12 }
::= { swAuthPortAccessControlEntry 3 }
swAuthAuthServerTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine."
REFERENCE
"9.4.1, serverTimeout."
DEFVAL { 16 }
::= { swAuthPortAccessControlEntry 4 }
swAuthAuthMaxReq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the maxReq constant currently in use by
the Backend Authentication state machine."
REFERENCE
"9.4.1, maxReq."
DEFVAL { 2 }
::= { swAuthPortAccessControlEntry 5 }
swAuthAuthTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine."
REFERENCE
"9.4.1, txPeriod."
DEFVAL { 24 }
::= { swAuthPortAccessControlEntry 6 }
swAuthAuthReAuthPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine."
REFERENCE
"9.4.1, reAuthPerio."
DEFVAL { 3600 }
::= { swAuthPortAccessControlEntry 7 }
swAuthAuthReAuthentication OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1)."
REFERENCE
"9.4.1, reAuthEnable."
::= { swAuthPortAccessControlEntry 8 }
swAuthAuthConfigPortControl OBJECT-TYPE
SYNTAX INTEGER {
forceUnauthorized(1),
auto(2),
forceAuthorized(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
REFERENCE
"9.4.1, AuthControlledPortControl."
::= { swAuthPortAccessControlEntry 9 }
swAuthAuthCapability OBJECT-TYPE
SYNTAX INTEGER {
authenticator(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
REFERENCE
"AuthCapability."
::= { swAuthPortAccessControlEntry 10 }
swAuthAuthDirection OBJECT-TYPE
SYNTAX INTEGER {
both(0),
in(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
REFERENCE
"AuthDirection."
::= { swAuthPortAccessControlEntry 11 }
-- -------------------------------------------------------------
-- groups in the 802.1X Local user MIB
-- -------------------------------------------------------------
swAuthUser OBJECT IDENTIFIER ::= { companyAuthGroup 3 }
-- -----------------------------------------------------------------------------
-- swAuthUser
-- -----------------------------------------------------------------------------
swAuthUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAuthUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthUser 1 }
swAuthUserEntry OBJECT-TYPE
SYNTAX SwAuthUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { swAuthUserName }
::= { swAuthUserTable 1 }
SwAuthUserEntry ::= SEQUENCE {
swAuthUserName SnmpAdminString,
swAuthUserPassword DisplayString,
swAuthUserStatus RowStatus
}
swAuthUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table.
This object is used to set 802.1X Local user name,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { swAuthUserEntry 1 }
swAuthUserPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Local user Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { swAuthUserEntry 2 }
swAuthUserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the swAuthUserTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The swAuthUserName objects must be
explicitly set."
::= { swAuthUserEntry 3 }
-- -------------------------------------------------------------
-- groups in the Authentication RADIUS Server MIB
-- -------------------------------------------------------------
swAuthRadiusServer OBJECT IDENTIFIER ::= { companyAuthGroup 4 }
-- -----------------------------------------------------------------------------
-- swAuthRadiusServer
-- -----------------------------------------------------------------------------
iPv4swAuthRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPv4SwAuthRadiusServerEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthRadiusServer 1 }
iPv4swAuthRadiusServerEntry OBJECT-TYPE
SYNTAX IPv4SwAuthRadiusServerEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { iPv4swAuthRadiusServerIndex }
::= { iPv4swAuthRadiusServerTable 1 }
IPv4SwAuthRadiusServerEntry ::= SEQUENCE {
iPv4swAuthRadiusServerIndex INTEGER,
iPv4swAuthRadiusServerAddress IpAddress,
iPv4swAuthRadiusServerAuthenticationPort INTEGER,
iPv4swAuthRadiusServerAccountingPort INTEGER,
iPv4swAuthRadiusServerTimeout INTEGER,
iPv4swAuthRadiusServerRetransmit INTEGER,
iPv4swAuthRadiusServerKey DisplayString,
iPv4swAuthRadiusServerStatus RowStatus
}
iPv4swAuthRadiusServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"A unique value for Authentication RADIUS Server index.
Its value ranges between 1 and 3."
::= { iPv4swAuthRadiusServerEntry 1 }
iPv4swAuthRadiusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The IP address of the RADIUS server
referred to in this table entry."
::= { iPv4swAuthRadiusServerEntry 2 }
iPv4swAuthRadiusServerAuthenticationPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1812 }
::= { iPv4swAuthRadiusServerEntry 3 }
iPv4swAuthRadiusServerAccountingPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1813 }
::= { iPv4swAuthRadiusServerEntry 4 }
iPv4swAuthRadiusServerTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 5 }
::= { iPv4swAuthRadiusServerEntry 5 }
iPv4swAuthRadiusServerRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 2 }
::= { iPv4swAuthRadiusServerEntry 6 }
iPv4swAuthRadiusServerKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { iPv4swAuthRadiusServerEntry 7 }
iPv4swAuthRadiusServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of this conceptual row in the
swAuthRadiusServerTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The swAuthRadiusServerIndex objects
must be explicitly set."
::= { iPv4swAuthRadiusServerEntry 8 }
-- -----------------------------------------------------------------------------
-- swAuthRadiusServer for IPv6
-- -----------------------------------------------------------------------------
swAuthRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAuthRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthRadiusServer 2 }
swAuthRadiusServerEntry OBJECT-TYPE
SYNTAX SwAuthRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { swAuthRadiusServerIndex }
::= { swAuthRadiusServerTable 1 }
SwAuthRadiusServerEntry ::= SEQUENCE {
swAuthRadiusServerIndex INTEGER,
swAuthRadiusIPType INTEGER,
swAuthRadiusServerAddress Ipv6Address,
swAuthRadiusServerInterfaceName OCTET STRING,
swAuthRadiusServerAuthenticationPort INTEGER,
swAuthRadiusServerAccountingPort INTEGER,
swAuthRadiusServerTimeout INTEGER,
swAuthRadiusServerRetransmit INTEGER,
swAuthRadiusServerKey DisplayString,
swAuthRadiusServerStatus RowStatus
}
swAuthRadiusServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for Authentication RADIUS Server index.
Its value ranges between 1 and 3."
::= { swAuthRadiusServerEntry 1 }
swAuthRadiusIPType OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server IP type
referred to in this table entry."
DEFVAL { 1 }
::= { swAuthRadiusServerEntry 2 }
swAuthRadiusServerAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server
referred to in this table entry."
::= { swAuthRadiusServerEntry 3 }
swAuthRadiusServerInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the interface name when the swAuthRadiusServerAddress is linklocal address."
::= { swAuthRadiusServerEntry 4 }
swAuthRadiusServerAuthenticationPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1812 }
::= { swAuthRadiusServerEntry 5 }
swAuthRadiusServerAccountingPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1813 }
::= { swAuthRadiusServerEntry 6 }
swAuthRadiusServerTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 5 }
::= { swAuthRadiusServerEntry 7 }
swAuthRadiusServerRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 2 }
::= { swAuthRadiusServerEntry 8 }
swAuthRadiusServerKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { swAuthRadiusServerEntry 9 }
swAuthRadiusServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the
swAuthRadiusServerTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The swAuthRadiusServerIndex objects
must be explicitly set."
::= { swAuthRadiusServerEntry 10 }
-- ------------------------------------------------------------------
-- QoS
-- ------------------------------------------------------------------
--1--
cosScheduleMechanism OBJECT-TYPE
SYNTAX INTEGER {
strictPriority(1),
wrr(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queuing mechanism.
strictPriority(1) : Strict Priority
wrr(2) : Weighted Round Robin
Strict-priority scheduling is implemented with a special strict-priority scheduler node that is stacked directly above the port. Queues stacked on top of the strict-priority scheduler node always get bandwidth before other queues.
Weighted round-robin scheduling is designed to better handle queues with different processing capacities. Each queue has a weight : Low is 1, Medium is 2, High is 4 and Highest is 8 for WS3 spec. Queues with higher weights get bandwidth before than other queues with less weights.
"
::= { companyQoSGroup 1 }
--2--
cosOutputSchedule OBJECT IDENTIFIER ::= { companyQoSGroup 2 }
cosClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF CosClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cosOutputSchedule."
::= { cosOutputSchedule 1 }
cosClassEntry OBJECT-TYPE
SYNTAX CosClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cosOutputClass Weight."
INDEX { cosClassIndex }
::= { cosClassTable 1 }
CosClassEntry ::= SEQUENCE {
cosClassIndex INTEGER,
cosWeight INTEGER
}
cosClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A index of class 0 ~ 7."
::= { cosClassEntry 1 }
cosWeight OBJECT-TYPE
SYNTAX INTEGER (1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cos weight "
::= { cosClassEntry 2 }
cosBandwidthCtrlSettings OBJECT IDENTIFIER ::= { companyQoSGroup 9 }
cosBandwidthCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CosBandwidthCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cosBandwidthCtrlEntry default priority Entries."
::= { cosBandwidthCtrlSettings 1 }
cosBandwidthCtrlEntry OBJECT-TYPE
SYNTAX CosBandwidthCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cosBandwidthCtrlEntry default priority priorities."
INDEX { cosBandwidthCtrlPortIndex, cosBandwidthCtrlClassIndex }
::= { cosBandwidthCtrlTable 1 }
CosBandwidthCtrlEntry ::= SEQUENCE {
cosBandwidthCtrlPortIndex Integer32,
cosBandwidthCtrlClassIndex INTEGER,
cosBandwidthValue Integer32
}
cosBandwidthCtrlPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A port identifier that is in the range of 1 to ifNumber."
::= { cosBandwidthCtrlEntry 1 }
cosBandwidthCtrlClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A BandwidthCtrlClassIndex identifier that is in the range of 1 to ifNumber."
::= { cosBandwidthCtrlEntry 2 }
cosBandwidthValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BandwidthValue return value."
::= { cosBandwidthCtrlEntry 3 }
-- ------------------------------------------------------------------
-- QoS
-- ------------------------------------------------------------------
--4 default user priority--
qosDefaultUserPri OBJECT IDENTIFIER ::= { companyQoSGroup 4 }
qosDefaultUserPriTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDefaultUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of 802.1p port default priority Entries."
::= { qosDefaultUserPri 1 }
qosDefaultUserPriEntry OBJECT-TYPE
SYNTAX QosDefaultUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of 802.1p port default priority priorities."
INDEX { qosDefaultUserPriPortIndex }
::= { qosDefaultUserPriTable 1 }
QosDefaultUserPriEntry ::= SEQUENCE {
qosDefaultUserPriPortIndex INTEGER,
qosDefaultPriority INTEGER,
qosEffectiveDefaultPriority INTEGER
}
qosDefaultUserPriPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A port identifier that is in the range of 1 to ifNumber."
::= { qosDefaultUserPriEntry 1 }
qosDefaultPriority OBJECT-TYPE
SYNTAX INTEGER {
priority0(0),
priority1(1),
priority2(2),
priority3(3),
priority4(4),
priority5(5),
priority6(6),
priority7(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization when 802.1p is enabled."
::= { qosDefaultUserPriEntry 2 }
qosEffectiveDefaultPriority OBJECT-TYPE
SYNTAX INTEGER {
priority0(0),
priority1(1),
priority2(2),
priority3(3),
priority4(4),
priority5(5),
priority6(6),
priority7(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For ingress untagged packets, the per port 'Effective Default
Priority' setting will be applied to packets of each port to
provide port-based traffic prioritization when 802.1p is enabled."
::= { qosDefaultUserPriEntry 3 }
--5 vlan tag user priority --
qosUserPriority OBJECT IDENTIFIER ::= { companyQoSGroup 5 }
qosUserPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge. Traffic class is a
number in the range (0..3)."
REFERENCE
"ISO/IEC 15802-3 Table 7-2"
::= { qosUserPriority 1 }
qosUserPriEntry OBJECT-TYPE
SYNTAX QosUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Priority to Traffic Class mapping."
INDEX {qosUserPriIndex }
::= { qosUserPriorityTable 1 }
QosUserPriEntry ::=
SEQUENCE {
qosUserPriIndex
INTEGER,
qosUserPriClass
INTEGER
}
qosUserPriIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For ingress tagged packets, D-Link Smart Switches will refer
to these information and prioritize them with 4 different priority queues.
If 802.1p is enabled."
::= { qosUserPriEntry 1 }
qosUserPriClass OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The User Class the received frame is mapped to."
::= { qosUserPriEntry 2 }
--7 priority setting on/off table --
qosPriSettings OBJECT IDENTIFIER ::= { companyQoSGroup 7 }
qosPriSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPriSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port priority settings."
REFERENCE
"ISO/IEC 15802-3 Table 7-2"
::= { qosPriSettings 1 }
qosPriSettingsEntry OBJECT-TYPE
SYNTAX QosPriSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port priority settings Entries."
INDEX {qosPriSetPortIndex }
::= { qosPriSettingsTable 1 }
QosPriSettingsEntry ::=
SEQUENCE {
qosPriSetPortIndex
INTEGER,
qosPriSetPortType
INTEGER
}
qosPriSetPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A port identifier that is in the range of 1 to ifNumber."
::= { qosPriSettingsEntry 1 }
qosPriSetPortType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
ieee8021P(2),
dscp-tos(4),
ieee8021P-dscp-tos(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port priority setting type. (ex. none = 0,
802.1p = 2, DSCP = 4. If you want enable 802.1p & DSCP, the value
is 2 + 4 = 6. "
::= { qosPriSettingsEntry 2 }
-- ------------------------------------------------------------------
-- QoS
-- ------------------------------------------------------------------
qosDiffServTOS OBJECT IDENTIFIER ::= { companyQoSGroup 6 }
qosDSCPTOSMode OBJECT-TYPE
SYNTAX INTEGER {
tos(1),
dscp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Settings of Qos mode:
DSCP QoS or TOS Qos.
IEEE 802.1p : It specifies a priority(0~7) value to four queues in WS3 : Low(1,2), Medium(0,3), High(4,5) and Highest(6,7), inclusive that can be used by Quality of Service (QoS) disciplines to differentiate traffic.
DSCP : Differentiated services enhancements to the Internet protocol are intended to enable scalable service discrimination in the Internet without the need for per-flow state and signaling at every hop.
"
::= { qosDiffServTOS 1 }
-- ------------------------------------------------------------------
-- DSCP_Mode
-- ------------------------------------------------------------------
qosDiffServTypeGroup OBJECT IDENTIFIER ::= { qosDiffServTOS 2 }
qosDiffServType00 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 0 : IP ToS value = 0"
::= { qosDiffServTypeGroup 1 }
qosDiffServType01 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 01 : IP ToS value = 4"
::= { qosDiffServTypeGroup 2 }
qosDiffServType02 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 02 : IP ToS value = 8"
::= { qosDiffServTypeGroup 3 }
qosDiffServType03 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 03 : IP ToS value = 12"
::= { qosDiffServTypeGroup 4 }
qosDiffServType04 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 04 : IP ToS value = 16"
::= { qosDiffServTypeGroup 5 }
qosDiffServType05 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 05 : IP ToS value = 20"
::= { qosDiffServTypeGroup 6 }
qosDiffServType06 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 06 : IP ToS value = 24"
::= { qosDiffServTypeGroup 7 }
qosDiffServType07 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 07 : IP ToS value = 28"
::= { qosDiffServTypeGroup 8 }
qosDiffServType08 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 08 : IP ToS value = 32"
::= { qosDiffServTypeGroup 9 }
qosDiffServType09 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 09 : IP ToS value = 36"
::= { qosDiffServTypeGroup 10 }
qosDiffServType10 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 10 : IP ToS value = 40"
::= { qosDiffServTypeGroup 11 }
qosDiffServType11 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 11 : IP ToS value = 44"
::= { qosDiffServTypeGroup 12 }
qosDiffServType12 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 12 : IP ToS value = 48"
::= { qosDiffServTypeGroup 13 }
qosDiffServType13 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 13 : IP ToS value = 52"
::= { qosDiffServTypeGroup 14 }
qosDiffServType14 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 14 : IP ToS value = 56"
::= { qosDiffServTypeGroup 15 }
qosDiffServType15 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 15 : IP ToS value = 60"
::= { qosDiffServTypeGroup 16 }
qosDiffServType16 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 16 : IP ToS value = 64"
::= { qosDiffServTypeGroup 17 }
qosDiffServType17 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 17 : IP ToS value = 68"
::= { qosDiffServTypeGroup 18 }
qosDiffServType18 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 18 : IP ToS value = 72"
::= { qosDiffServTypeGroup 19 }
qosDiffServType19 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 19 : IP ToS value = 76"
::= { qosDiffServTypeGroup 20 }
qosDiffServType20 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 20 : IP ToS value = 80"
::= { qosDiffServTypeGroup 21 }
qosDiffServType21 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 21 : IP ToS value = 84"
::= { qosDiffServTypeGroup 22 }
qosDiffServType22 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 22 : IP ToS value = 88"
::= { qosDiffServTypeGroup 23 }
qosDiffServType23 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 23 : IP ToS value = 92"
::= { qosDiffServTypeGroup 24 }
qosDiffServType24 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 24 : IP ToS value = 96"
::= { qosDiffServTypeGroup 25 }
qosDiffServType25 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 25 : IP ToS value = 100"
::= { qosDiffServTypeGroup 26 }
qosDiffServType26 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 26 : IP ToS value = 104"
::= { qosDiffServTypeGroup 27 }
qosDiffServType27 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 27 : IP ToS value = 108"
::= { qosDiffServTypeGroup 28 }
qosDiffServType28 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 28 : IP ToS value = 112"
::= { qosDiffServTypeGroup 29 }
qosDiffServType29 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 29 : IP ToS value = 116"
::= { qosDiffServTypeGroup 30 }
qosDiffServType30 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 30 : IP ToS value = 120"
::= { qosDiffServTypeGroup 31 }
qosDiffServType31 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 31 : IP ToS value = 124"
::= { qosDiffServTypeGroup 32 }
qosDiffServType32 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 32 : IP ToS value = 128"
::= { qosDiffServTypeGroup 33 }
qosDiffServType33 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 33 : IP ToS value = 132"
::= { qosDiffServTypeGroup 34 }
qosDiffServType34 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 34 : IP ToS value = 136"
::= { qosDiffServTypeGroup 35 }
qosDiffServType35 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 35 : IP ToS value = 140"
::= { qosDiffServTypeGroup 36 }
qosDiffServType36 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 36 : IP ToS value = 144"
::= { qosDiffServTypeGroup 37 }
qosDiffServType37 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 37 : IP ToS value = 148"
::= { qosDiffServTypeGroup 38 }
qosDiffServType38 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 38 : IP ToS value = 152"
::= { qosDiffServTypeGroup 39 }
qosDiffServType39 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 39 : IP ToS value = 156"
::= { qosDiffServTypeGroup 40 }
qosDiffServType40 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 40 : IP ToS value = 160"
::= { qosDiffServTypeGroup 41 }
qosDiffServType41 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 41 : IP ToS value = 164"
::= { qosDiffServTypeGroup 42 }
qosDiffServType42 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 42 : IP ToS value = 168"
::= { qosDiffServTypeGroup 43 }
qosDiffServType43 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 43 : IP ToS value = 172"
::= { qosDiffServTypeGroup 44 }
qosDiffServType44 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 44 : IP ToS value = 176"
::= { qosDiffServTypeGroup 45 }
qosDiffServType45 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 45 : IP ToS value = 180"
::= { qosDiffServTypeGroup 46 }
qosDiffServType46 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 46 : IP ToS value = 184"
::= { qosDiffServTypeGroup 47 }
qosDiffServType47 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 47 : IP ToS value = 188"
::= { qosDiffServTypeGroup 48 }
qosDiffServType48 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 48 : IP ToS value = 192"
::= { qosDiffServTypeGroup 49 }
qosDiffServType49 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 49 : IP ToS value = 196"
::= { qosDiffServTypeGroup 50 }
qosDiffServType50 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 50 : IP ToS value = 200"
::= { qosDiffServTypeGroup 51 }
qosDiffServType51 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 51 : IP ToS value = 204"
::= { qosDiffServTypeGroup 52 }
qosDiffServType52 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 52 : IP ToS value = 208"
::= { qosDiffServTypeGroup 53 }
qosDiffServType53 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 53 : IP ToS value = 212"
::= { qosDiffServTypeGroup 54 }
qosDiffServType54 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 54 : IP ToS value = 216"
::= { qosDiffServTypeGroup 55 }
qosDiffServType55 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 55 : IP ToS value = 220"
::= { qosDiffServTypeGroup 56 }
qosDiffServType56 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 56 : IP ToS value = 224"
::= { qosDiffServTypeGroup 57 }
qosDiffServType57 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 57 : IP ToS value = 228"
::= { qosDiffServTypeGroup 58 }
qosDiffServType58 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 58 : IP ToS value = 232"
::= { qosDiffServTypeGroup 59 }
qosDiffServType59 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 59 : IP ToS value = 236"
::= { qosDiffServTypeGroup 60 }
qosDiffServType60 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 60 : IP ToS value = 240"
::= { qosDiffServTypeGroup 61 }
qosDiffServType61 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 61 : IP ToS value = 244"
::= { qosDiffServTypeGroup 62 }
qosDiffServType62 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 62 : IP ToS value = 248"
::= { qosDiffServTypeGroup 63 }
qosDiffServType63 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 63 : IP ToS value = 252"
::= { qosDiffServTypeGroup 64 }
-- ------------------------------------------------------------------
-- TOS_Mode
-- ------------------------------------------------------------------
qosTOSGroup OBJECT IDENTIFIER ::= { qosDiffServTOS 3 }
qosTOSType00 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 0"
::= { qosTOSGroup 1 }
qosTOSType01 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 01"
::= { qosTOSGroup 2 }
qosTOSType02 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 02"
::= { qosTOSGroup 3 }
qosTOSType03 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 03"
::= { qosTOSGroup 4 }
qosTOSType04 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 04"
::= { qosTOSGroup 5 }
qosTOSType05 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 05"
::= { qosTOSGroup 6 }
qosTOSType06 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 06"
::= { qosTOSGroup 7 }
qosTOSType07 OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TOS 07"
::= { qosTOSGroup 8 }
qosAclPrioritySettings OBJECT IDENTIFIER ::= { companyQoSGroup 8 }
-- ------------------------------------------------------------------
-- ipv4aclQosTable
-- ------------------------------------------------------------------
ipv4aclQosTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4AclQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of priority by acl setting."
::= { qosAclPrioritySettings 1 }
ipv4aclQosEntry OBJECT-TYPE
SYNTAX Ipv4AclQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of priority by acl setting entry."
INDEX { ipv4aclQosIndex }
::= { ipv4aclQosTable 1 }
Ipv4AclQosEntry ::=
SEQUENCE {
ipv4aclQosIndex Integer32,
ipv4aclQosType INTEGER,
ipv4aclQosMACAddr MacAddress,
ipv4aclQosIPAddr IpAddress,
ipv4aclQosTCPUDPPort Integer32,
ipv4aclQosVlanID Integer32,
ipv4aclQosProtocol Integer32,
ipv4aclQosAssignClass INTEGER,
ipv4aclQosStatus RowStatus
}
ipv4aclQosIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of priority by acl setting."
::= { ipv4aclQosEntry 1 }
ipv4aclQosType OBJECT-TYPE
SYNTAX INTEGER { mac(0), ip(1), tcp(2), udp(3), vlanid(4), protocol(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of priority by acl setting."
::= { ipv4aclQosEntry 2 }
ipv4aclQosMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst MAC of priority by acl setting."
::= { ipv4aclQosEntry 3 }
ipv4aclQosIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst IP of priority by acl setting"
::= { ipv4aclQosEntry 4 }
ipv4aclQosTCPUDPPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst TCP/UDP port of priority by acl setting"
::= { ipv4aclQosEntry 5 }
ipv4aclQosVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of priority by acl setting"
::= { ipv4aclQosEntry 6 }
ipv4aclQosProtocol OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip protocol number of priority by acl setting"
::= { ipv4aclQosEntry 7 }
ipv4aclQosAssignClass OBJECT-TYPE
SYNTAX INTEGER { class0(0), class1(1), class2(2), class3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Be mapped class of priority by acl setting."
::= { ipv4aclQosEntry 8 }
ipv4aclQosStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of priority by acl setting."
::= { ipv4aclQosEntry 9 }
-- ------------------------------------------------------------------
-- aclQosTable
-- ------------------------------------------------------------------
aclQosTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of priority by acl setting."
::= { qosAclPrioritySettings 2 }
aclQosEntry OBJECT-TYPE
SYNTAX AclQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of priority by acl setting entry."
INDEX { aclQosIndex }
::= { aclQosTable 1 }
AclQosEntry ::=
SEQUENCE {
aclQosIndex Integer32,
aclQosType INTEGER,
aclQosMACAddr MacAddress,
aclQosIPAddr IpAddress,
aclQosIPv6Addr Ipv6Address,
aclQosTCPUDPPort Integer32,
aclQosVlanID Integer32,
aclQosProtocol Integer32,
--start DLINK_METRO_LIKE_R25QOS_BY_IPV6_TC_ACL
aclQosIP6TC Integer32,
--end DLINK_METRO_LIKE_R25QOS_BY_IPV6_TC_ACL
aclQosAssignClass INTEGER,
aclQosStatus RowStatus
}
aclQosIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of priority by acl setting."
::= { aclQosEntry 1 }
aclQosType OBJECT-TYPE
SYNTAX INTEGER { mac(0), ip(1), tcp(2), udp(3), vlanid(4), protocol(5), ipv6(6), ipv6traffic-class(7) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of priority by acl setting."
::= { aclQosEntry 2 }
aclQosMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst MAC of priority by acl setting."
::= { aclQosEntry 3 }
aclQosIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst IP of priority by acl setting"
::= { aclQosEntry 4 }
aclQosIPv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst IP of priority by acl setting. "
::= { aclQosEntry 5 }
aclQosTCPUDPPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst TCP/UDP port of priority by acl setting"
::= { aclQosEntry 6 }
aclQosVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of priority by acl setting"
::= { aclQosEntry 7 }
aclQosProtocol OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip protocol number of priority by acl setting"
::= { aclQosEntry 8 }
--start DLINK_METRO_LIKE_R25QOS_BY_IPV6_TC_ACL
aclQosIP6TC OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ipv6 Traffic Class number of priority by acl setting"
::= { aclQosEntry 10 }
--end DLINK_METRO_LIKE_R25QOS_BY_IPV6_TC_ACL
aclQosAssignClass OBJECT-TYPE
SYNTAX INTEGER { class0(0), class1(1), class2(2), class3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Be mapped class of priority by acl setting."
::= { aclQosEntry 98 }
aclQosStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of priority by acl setting."
::= { aclQosEntry 99 }
-- ----------------------------------------------------------
-- The companyTrafficMgmt Groups
-- ----------------------------------------------------------
-- Bandwidth Control Group --------------------------------------------- --
bandwidthCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 1 }
bandwidthCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BandwidthCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each interface in the switch."
::= { bandwidthCtrlSettings 2 }
bandwidthCtrlEntry OBJECT-TYPE
SYNTAX BandwidthCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical
interface in the switch."
INDEX { bandwidthCtrlIndex }
::= { bandwidthCtrlTable 1 }
BandwidthCtrlEntry ::=
SEQUENCE {
bandwidthCtrlIndex
Integer32,
bandwidthCtrlTxThreshold
Integer32,
bandwidthCtrlRxThreshold
Integer32 ,
bandwidthEffecTxThreshold
Integer32,
bandwidthEffecRxThreshold
Integer32
}
bandwidthCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies.
For all machines give maximum port number."
::= { bandwidthCtrlEntry 1 }
bandwidthCtrlTxThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. The value can
be set between 64~102400(Kbits per second) in FE port, 64~1024000
(Kbits per second) in GE port."
::= { bandwidthCtrlEntry 2 }
bandwidthCtrlRxThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets on this interface. The value that
can be set for this object is limited by the underlying hardware.
The value can be set between 64~102400(Kbits per second) in FE
port, 64~1024000(Kbits per second) in GE port."
::= { bandwidthCtrlEntry 3}
bandwidthEffecTxThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. "
::= { bandwidthCtrlEntry 4}
bandwidthEffecRxThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets on this interface. The value that
can be set for this object is limited by the underlying hardware. "
::= { bandwidthCtrlEntry 5}
-- Traffic Control Group --------------------------------------------- --
trafficCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 4 }
trafficCtrlTrap OBJECT-TYPE
SYNTAX INTEGER {
none(0),
stormOccurred(1),
stormCleared(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trap setting of traffic control."
::= { trafficCtrlSettings 1 }
trafficCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control table."
::= { trafficCtrlSettings 2 }
trafficCtrlEntry OBJECT-TYPE
SYNTAX TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control entry."
INDEX { trafficCtrlIndex }
::= { trafficCtrlTable 1 }
TrafficCtrlEntry ::=
SEQUENCE {
trafficCtrlIndex
Integer32,
trafficCtrlActionMode
INTEGER,
trafficCtrlType
INTEGER,
trafficCtrlThreshold
Integer32,
trafficCtrlCountDown
Integer32,
trafficCtrlTimeInterval
Integer32
}
trafficCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic control index."
::= { trafficCtrlEntry 1 }
trafficCtrlActionMode OBJECT-TYPE
SYNTAX INTEGER {
drop(0),
shutdown(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action mode of traffic control."
::= { trafficCtrlEntry 2 }
trafficCtrlType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
b(1),
m(2),
mb(3),
u(4),
ub(5),
um(6),
umb(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control type of traffic control.
(b: Broadcast, m: Multicast, u: Unknown Unicast)"
::= { trafficCtrlEntry 3 }
trafficCtrlThreshold OBJECT-TYPE
SYNTAX Integer32 (1..102400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of traffic control."
::= { trafficCtrlEntry 4 }
trafficCtrlCountDown OBJECT-TYPE
SYNTAX Integer32 (0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The count down value of traffic control."
::= { trafficCtrlEntry 5 }
trafficCtrlTimeInterval OBJECT-TYPE
SYNTAX Integer32 (5..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval of traffic control."
::= { trafficCtrlEntry 6 }
trafficCtrlAutoRecoverTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recover time of traffic control."
::= { trafficCtrlSettings 3 }
-- ------------------------------------------------------------------
-- companySecurity
-- ------------------------------------------------------------------
-- Trusted Host
securityTrustedHost OBJECT IDENTIFIER ::= { companySecurity 1 }
trustedHostStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates trusted host function is enabled or disabled.
When trusted host function is enabled, D-Link Smart Switches will
only allow hosts which you trust to access and control the switch.
Your local host IP Addresses must be one of the IP Addresses to
avoid disconnection."
DEFVAL { disabled }
::= { securityTrustedHost 1 }
ipv4trustedHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4TrustedHostEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table to configure trusted host in the system."
::= { securityTrustedHost 2 }
ipv4trustedHostEntry OBJECT-TYPE
SYNTAX Ipv4TrustedHostEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each entry in this table represents rules for particular
trusted host."
INDEX { ipv4trustedHostIpAddr, ipv4trustedHostIpMask }
::= { ipv4trustedHostTable 1 }
Ipv4TrustedHostEntry ::=
SEQUENCE {
ipv4trustedHostIpAddr
IpAddress,
ipv4trustedHostIpMask
IpAddress,
ipv4trustedHostRowStatus
RowStatus
}
ipv4trustedHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The IP address of host you allow to access to D-Link Smart
Switch.
Your local host IP Addresses must be one of the IP Addresses
to avoid disconnection."
::= { ipv4trustedHostEntry 1 }
ipv4trustedHostIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Used to mask with IP address, it allow you set a subnet as a
trusted host entry."
::= { ipv4trustedHostEntry 2 }
ipv4trustedHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { ipv4trustedHostEntry 3 }
-- ipv6
trustedHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrustedHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure trusted host for in the system."
::= { securityTrustedHost 3 }
trustedHostEntry OBJECT-TYPE
SYNTAX TrustedHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents rules for particular
trusted host."
INDEX { trustedHostIPType, trustedHostIpAddr, trustedHostIpMask }
::= { trustedHostTable 1 }
TrustedHostEntry ::=
SEQUENCE {
trustedHostIPType
INTEGER,
trustedHostIpAddr
Ipv6Address,
trustedHostIpMask
Ipv6Address,
trustedHostRowStatus
RowStatus
}
trustedHostIPType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of IP interface."
::= { trustedHostEntry 1 }
trustedHostIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of host you allow to access to D-Link Smart
Switch.
Your local host IPv4/6 Addresses must be one of the IP Addresses
to avoid disconnection."
::= { trustedHostEntry 2 }
trustedHostIpMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to mask with IPv4/6 address, it allow you set a subnet as a
trusted host entry."
::= { trustedHostEntry 3 }
trustedHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { trustedHostEntry 4 }
securityARPSpoofPrevent OBJECT IDENTIFIER ::= { companySecurity 3}
-- aRPSpoofPrevent Control Table
aRPSpoofPreventTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARPSpoofPreventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control ARP Spoofing prevention for the entire
switch or for each interface in the switch."
::= { securityARPSpoofPrevent 1 }
aRPSpoofPreventEntry OBJECT-TYPE
SYNTAX ARPSpoofPreventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { aRPSpoofPreventIpAddr }
::= { aRPSpoofPreventTable 1 }
ARPSpoofPreventEntry ::=
SEQUENCE {
aRPSpoofPreventIpAddr
IpAddress,
aRPSpoofPreventMacAddress
MacAddress,
aRPSpoofPreventPortList
PortList,
aRPSpoofPreventRowStatus
RowStatus
}
aRPSpoofPreventIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { aRPSpoofPreventEntry 1 }
aRPSpoofPreventMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet Mac Address."
DEFVAL { '000102030405'h }
::= { aRPSpoofPreventEntry 2 }
aRPSpoofPreventPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { aRPSpoofPreventEntry 3 }
aRPSpoofPreventRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { aRPSpoofPreventEntry 4 }
-- ------------------------------------------------------------------
-- companySecurity
-- ------------------------------------------------------------------
securitySSL OBJECT IDENTIFIER ::= { companySecurity 5 }
sslSecurityHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling secure HTTP in the system."
DEFVAL { disable }
::= { securitySSL 1 }
sslCiphers OBJECT IDENTIFIER ::= { securitySSL 2 }
sslCipherSuiteList OBJECT-TYPE
SYNTAX BITS {
rsa-null-md5(0),
rsa-null-sha(1),
rsa-des-sha(2),
rsa-3des-sha(3),
dh-rsa-des-sha(4),
dh-rsa-3des-sha(5),
rsa-exp1024-des-sha(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list."
::= { sslCiphers 1}
-- ------------------------------------------------------------------
-- companySecurity
-- ------------------------------------------------------------------
securitySSH OBJECT IDENTIFIER ::= { companySecurity 8 }
sshSecurityStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling ssh in the system."
DEFVAL { disable }
::= { securitySSH 1}
sshMaxAuthFailAttempts OBJECT-TYPE
SYNTAX INTEGER (2..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the max auth fail retry attempt times."
::= {securitySSH 2}
sshSessionKeyRekeying OBJECT-TYPE
SYNTAX INTEGER {
never(0),
ten-min(1),
thirty-min(2),
sixty-min(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates one SSH session rekey time interval."
::= {securitySSH 3}
sshMaxSession OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates max SSH session number supported in system."
::= {securitySSH 4}
sshConnectionTimeout OBJECT-TYPE
SYNTAX INTEGER (120..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates SSH connection timeout value."
::= {securitySSH 5}
--************************************************************************
-- SSH encryption algorithm group configuration
--************************************************************************
sshAuthenMethodPassWordAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates authen method password is enabled or disabled."
::= {securitySSH 6}
sshAuthenMethodPubKeyAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates authen method public-key is enabled or disabled."
::= {securitySSH 7}
sshAuthenMethodHostKeyAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates authen method host-key is enabled or disabled."
::= {securitySSH 8}
sshCipherSuiteList OBJECT-TYPE
SYNTAX BITS {
tripleDESCBC(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list."
::= { securitySSH 9}
sshMacSuiteList OBJECT-TYPE
SYNTAX BITS {
hMAC-SHA1(0),
hMAC-MD5(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the MAC-list."
::= { securitySSH 10}
sshPublKeyRSAAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates Public key generating algorithm RSA is enabled or disabled."
::= {securitySSH 11}
--************************************************************************
-- SSH User Auth Info.
--************************************************************************
sshUserInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshUserInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure SSH user auth in the system."
::= { securitySSH 12 }
sshUserInfoEntry OBJECT-TYPE
SYNTAX SshUserInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry to configure user auth in the system."
INDEX { sshUserInfoID }
::= { sshUserInfoTable 1 }
SshUserInfoEntry ::=
SEQUENCE {
sshUserInfoID Integer32,
sshUserInfoUserName DisplayString,
sshUserInfoAuth INTEGER,
sshUserInfoHostName DisplayString,
sshUserInfoHostIp IpAddress
}
sshUserInfoID OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Schedule identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 8."
::= { sshUserInfoEntry 1 }
sshUserInfoUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ssh user name associated with the SSH suer Info. entry (e.g., `admin, user')."
::= { sshUserInfoEntry 2}
sshUserInfoAuth OBJECT-TYPE
SYNTAX INTEGER {
publickey(4),
password(2),
hostbased(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates which auth used by the user."
::= {sshUserInfoEntry 3}
sshUserInfoHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ssh host name associated with the SSH suer Info. entry (e.g., `DUT1, DUT2')."
::= { sshUserInfoEntry 4}
sshUserInfoHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH HostBased IP Address of the system."
::= { sshUserInfoEntry 5 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityPortSecurity OBJECT IDENTIFIER ::= { companySecurity 2 }
-- Port Security Group --------------------------------------------- --
portSecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control port security features of the device."
::= { securityPortSecurity 1 }
portSecEntry OBJECT-TYPE
SYNTAX PortSecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in port security table for each interface
in the system."
INDEX { portSecIndex }
::= { portSecTable 1 }
PortSecEntry ::=
SEQUENCE {
portSecIndex
Integer32,
portSecState
INTEGER,
portSecMLA
Integer32
-- start DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
,
portSecLockAddrMode
INTEGER
-- end DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
}
portSecIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies.
For all machines give maximum port number."
::= { portSecEntry 1 }
portSecState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1), disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / disable port security admin state for the interface.
A given ports' dynamic MAC address learning will be stopped such
that the current source MAC addresses entered into the MAC address
forwarding table can not be changed once the port security admin
state is enabled."
::= { portSecEntry 2 }
portSecMLA OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface port security maximum learning address
numbers.
When given ports' admin state is enabled, allows forwarding
table learning address number. The number can be set 0 to 64.
Note: Set value 0 means cannot learn MAC address."
::= {portSecEntry 3}
-- start DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
portSecLockAddrMode OBJECT-TYPE
SYNTAX INTEGER {
deleteOnReset (1),
deleteOnTimeout (2),
permanent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures port security lock address mode for the interface.
deleteOnReset : The locked addresses will not age out until the Switch has been reset.
deleteOnTimeout : The locked addresses will age out after the aging timer expires.
Permanent : The locked addresses will not age out after the aging timer expires."
::= { portSecEntry 4 }
portSecFDBPermanentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecFDBPermanentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control port security FDB Permanent of the device."
::= { securityPortSecurity 2 }
portSecFDBPermanentEntry OBJECT-TYPE
SYNTAX PortSecFDBPermanentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in port security table for each interface
in the system."
INDEX { portSecFDBPermPort, portSecFDBPermIndex}
::= { portSecFDBPermanentTable 1 }
PortSecFDBPermanentEntry ::=
SEQUENCE {
portSecFDBPermIndex INTEGER,
portSecFDBPermVlanID INTEGER,
portSecFDBPermMac MacAddress,
portSecFDBPermPort INTEGER
}
portSecFDBPermIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port security MAC entry.
For all machines give maximum port number."
::= { portSecFDBPermanentEntry 1 }
portSecFDBPermVlanID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the port security MAC entry."
::= { portSecFDBPermanentEntry 2 }
portSecFDBPermMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the port security MAC entry."
::= { portSecFDBPermanentEntry 3 }
portSecFDBPermPort OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarding port of the port security MAC entry.
For all machines give maximum port number."
::= { portSecFDBPermanentEntry 4 }
-- end DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
-- ----------------------------------------------------------
-- The companyCableDiagnostic Groups
-- ----------------------------------------------------------
-- Cable Diagnostics Group --------------------------------------------- --
cableDiagTable OBJECT-TYPE
SYNTAX SEQUENCE OF CableDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the cable situation for each port."
::= {companyCableDiagnostic 1 }
cableDiagEntry OBJECT-TYPE
SYNTAX CableDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cable situations for each port on the device."
INDEX { cableDiagPortIndex }
::= { cableDiagTable 1 }
CableDiagEntry ::=
SEQUENCE {
cableDiagPortIndex
Integer32,
cableDiagPortType
INTEGER,
cableDiagLinkStatus
INTEGER,
cableDiagPair1Status
INTEGER,
cableDiagPair2Status
INTEGER,
cableDiagPair3Status
INTEGER,
cableDiagPair4Status
INTEGER,
cableDiagPair1Length
Integer32,
cableDiagPair2Length
Integer32,
cableDiagPair3Length
Integer32,
cableDiagPair4Length
Integer32,
cableDiagAction
INTEGER,
cableDiagStatus
INTEGER
}
cableDiagPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies.
For all machines give maximum port number."
::= { cableDiagEntry 1 }
cableDiagPortType OBJECT-TYPE
SYNTAX INTEGER {
fastEthernet(0),
gigaEthernet(1),
other(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the supported port data rate classification."
::= { cableDiagEntry 2 }
cableDiagLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
linkdown(0),
linkup(1),
other(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the link status."
::= { cableDiagEntry 3 }
cableDiagPair1Status OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
open-short(3),
crosstalk(4),
unknown(5),
count(6),
no-cable(7),
other(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 1 test result."
::= {cableDiagEntry 4 }
cableDiagPair2Status OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
open-short(3),
crosstalk(4),
unknown(5),
count(6),
no-cable(7),
other(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 2 test result."
::= {cableDiagEntry 5 }
cableDiagPair3Status OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
open-short(3),
crosstalk(4),
unknown(5),
count(6),
no-cable(7),
other(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 3 test result."
::= {cableDiagEntry 6 }
cableDiagPair4Status OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
open-short(3),
crosstalk(4),
unknown(5),
count(6),
no-cable(7),
other(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 4 test result."
::= {cableDiagEntry 7}
cableDiagPair1Length OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable Diagnostics pair 1 fault distance."
::= {cableDiagEntry 8}
cableDiagPair2Length OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 2 fault distance."
::= {cableDiagEntry 9}
cableDiagPair3Length OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 3 fault distance."
::= {cableDiagEntry 10}
cableDiagPair4Length OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cable diagnostics pair 4 fault distance."
::= {cableDiagEntry 11}
cableDiagAction OBJECT-TYPE
SYNTAX INTEGER {
action(1),
processing(2),
other(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Function to run the cable diagnostic on selected port.
Can not detect fiber ports"
::= { cableDiagEntry 12}
cableDiagStatus OBJECT-TYPE
SYNTAX INTEGER {
notrun(1),
processing(2),
lasttestok(3),
lasttestfailed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of cable diagnostics on the port.
not-run - cable diagnostics has never been run for this port
processing - cable diagnostics is currently running on the port
last-test-ok - the last cable diagnostics done on the port was successful
last-test-failed - the last cable diagnostics done on the port failed"
::= { cableDiagEntry 13 }
-- ------------------------------------------------------------------
-- companyACLGroup
-- ------------------------------------------------------------------
-- ACL Profile Group --------------------------------------------------
aclProfile OBJECT IDENTIFIER ::= { companyACLGroup 1 }
ipv4aclProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4AclProfileEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
" A table to ACL profile .
"
::= { aclProfile 1 }
ipv4aclProfileEntry OBJECT-TYPE
SYNTAX Ipv4AclProfileEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
" Each entry in this table is a ACL profile.
Index to the table is ACL profile ID. "
INDEX { ipv4aclProfileNo}
::= { ipv4aclProfileTable 1 }
Ipv4AclProfileEntry ::=
SEQUENCE {
ipv4aclProfileNo
Integer32,
ipv4aclProfileType
INTEGER,
ipv4aclProfileRuleCount
Integer32,
ipv4aclProfileMask
OCTET STRING,
ipv4aclProfileDstMacAddrMask
MacAddress,
ipv4aclProfileSrcMacAddrMask
MacAddress,
ipv4aclProfileIPProtocol
INTEGER,
ipv4aclProfileIPProtocolMask
OCTET STRING,
ipv4aclProfileDstIpAddrMask
IpAddress,
ipv4aclProfileSrcIpAddrMask
IpAddress,
ipv4aclProfileDstPortMask
OCTET STRING,
ipv4aclProfileSrcPortMask
OCTET STRING,
ipv4aclProfileArpSenderMacAddrMask
MacAddress,
ipv4aclProfileArpSenderIpAddrMask
IpAddress,
ipv4aclProfileUdfOffsetMap
OCTET STRING,
ipv4aclUdfOffsetChunk1
Integer32,
ipv4aclUdfOffsetMask1
OCTET STRING,
ipv4aclUdfOffsetChunk2
Integer32,
ipv4aclUdfOffsetMask2
OCTET STRING,
ipv4aclUdfOffsetChunk3
Integer32,
ipv4aclUdfOffsetMask3
OCTET STRING,
ipv4aclUdfOffsetChunk4
Integer32,
ipv4aclUdfOffsetMask4
OCTET STRING,
ipv4aclProfileStatus
RowStatus
}
ipv4aclProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only."
::= { ipv4aclProfileEntry 1 }
ipv4aclProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3 (2),
impb (3),
arpSP-permit(4),
arpSP-deny(5),
aclQos (8) ,
userDefined(9)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
arpSP_permit(4) - for ARP Spoofing prevention entry,
arpSP_deny(5) - for ARP Spoofing prevention entry,
voiceVlan(6) - for Voice VLAN OUI entry.
userDefined(9) - for User Defined entry.
Note that only l2, l3 and userDefined could be set by user,
other is reserved for system to show information.
"
::= { ipv4aclProfileEntry 2 }
ipv4aclProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of rules in this profile."
::= { ipv4aclProfileEntry 3 }
ipv4aclProfileMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC 0 (LSB)
L2 SRC_MAC 1
L2 VID 2
L2 8021P_PRIORITY 3
L2 ETHER_TYPE 4
L3 DSCP 5
L3 ICMP_TYPE 6
L3 ICMP_CODE 7
L3 IGMP_TYPE 8
L3 DST_IP 9
L3 SRC_IP 10
L3 DST_PORT 11
L3 SRC_PORT 12
L3 TCPFLAG 13
ARP-SP ARP_SENDER_MAC 14
ARP-SP ARP_SENDER_IP 15
L3 TOS 16
UDF UDF1 17
UDF UDF2 18
UDF UDF3 19
UDF UDF4 20
L3v6 TRAFFIC_CLASS 21
L3v6 DST_IPV6 22
L3v6 SRC_IPV6 23 (MSB)
-------------------------------------------
The value is in Hex format.
"
::= { ipv4aclProfileEntry 4 }
ipv4aclProfileDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile destination MAC address mask.
If DST_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
"
::= { ipv4aclProfileEntry 5 }
ipv4aclProfileSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile source MAC address mask.
If SRC_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
"
::= { ipv4aclProfileEntry 6 }
ipv4aclProfileIPProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17),
icmpv6(58)
,ipProtocolMask(256)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
"
::= { ipv4aclProfileEntry 7 }
ipv4aclProfileIPProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile IP protocol mask.
If aclProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { ipv4aclProfileEntry 8 }
ipv4aclProfileDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile destination IP address mask.
If DST_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 9 }
ipv4aclProfileSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile source IP address mask.
If SRC_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 10 }
ipv4aclProfileDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile UDP/TCP destination port mask.
If DST_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { ipv4aclProfileEntry 11 }
ipv4aclProfileSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ACL Profile UDP/TCP source port mask.
If SRC_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { ipv4aclProfileEntry 12 }
ipv4aclProfileArpSenderMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The ACL Profile Sender MAC mask.
This is only for ARP Spoofing Prevention which is System-defined ACL,
and it's not allow to modify.
The value is in HEX format.
"
DEFVAL { 'FFFFFFFFFF'h }
::= { ipv4aclProfileEntry 13 }
ipv4aclProfileArpSenderIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The ACL Profile Sender IP mask.
This is only for ARP Spoofing Prevention which is System-defined ACL,
and it's not allow to modify.
The value is in HEX format.
"
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 14 }
ipv4aclProfileUdfOffsetMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicate which Udf field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
UDF Offset1 0 (LSB)
UDF Offset2 1
UDF Offset3 2
UDF Offset4 3
-------------------------------------------
The value is in Hex format.
"
::= { ipv4aclProfileEntry 15 }
ipv4aclUdfOffsetChunk1 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset Chunk."
::= { ipv4aclProfileEntry 17 }
ipv4aclUdfOffsetMask1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 18 }
ipv4aclUdfOffsetChunk2 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset Chunk."
::= { ipv4aclProfileEntry 20 }
ipv4aclUdfOffsetMask2 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 21 }
ipv4aclUdfOffsetChunk3 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset Chunk."
::= { ipv4aclProfileEntry 23 }
ipv4aclUdfOffsetMask3 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 24 }
ipv4aclUdfOffsetChunk4 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset Chunk."
::= { ipv4aclProfileEntry 26 }
ipv4aclUdfOffsetMask4 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { ipv4aclProfileEntry 27 }
ipv4aclProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of aclProfileType,
aclProfileMask and ProtocolType are not conflicted.
"
::= { ipv4aclProfileEntry 28 }
-- IPv6 ACL Profile Group --------------------------------------------------
aclProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to ACL profile .
"
::= { aclProfile 2 }
aclProfileEntry OBJECT-TYPE
SYNTAX AclProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a ACL profile.
Index to the table is ACL profile ID. "
INDEX { aclProfileNo}
::= { aclProfileTable 1 }
AclProfileEntry ::=
SEQUENCE {
aclProfileNo
Integer32,
aclProfileType
INTEGER,
aclProfileRuleCount
Integer32,
aclProfileMask
OCTET STRING,
aclProfileDstMacAddrMask
MacAddress,
aclProfileSrcMacAddrMask
MacAddress,
aclProfileIPProtocol
INTEGER,
aclProfileIPProtocolMask
OCTET STRING,
aclProfileDstIpAddrMaskType
INTEGER,
aclProfileDstIpAddrMask
Ipv6Address,
aclProfileSrcIpAddrMaskType
INTEGER,
aclProfileSrcIpAddrMask
Ipv6Address,
aclProfileDstPortMask
OCTET STRING,
aclProfileSrcPortMask
OCTET STRING,
aclProfileArpSenderMacAddrMask
MacAddress,
aclProfileArpSenderIpAddrMask
Ipv6Address,
aclProfileUdfOffsetMap
OCTET STRING,
aclUdfOffsetChunk1
Integer32,
aclUdfOffsetMask1
OCTET STRING,
aclUdfOffsetChunk2
Integer32,
aclUdfOffsetMask2
OCTET STRING,
aclUdfOffsetChunk3
Integer32,
aclUdfOffsetMask3
OCTET STRING,
aclUdfOffsetChunk4
Integer32,
aclUdfOffsetMask4
OCTET STRING,
aclProfileStatus
RowStatus
}
aclProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only."
::= { aclProfileEntry 1 }
aclProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3v4 (2),
l3v6 (11),
impb (3),
arpSP-permit(4),
arpSP-deny(5),
aclQos (8) ,
userDefined(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3v4 (2) - for IPv4-based rule,
l3v6 (11) - for IPv6-based rule,
arpSP_permit(4) - for ARP Spoofing prevention entry,
arpSP_deny(5) - for ARP Spoofing prevention entry,
voiceVlan(6) - for Voice VLAN OUI entry.
userDefined(9) - for User Defined entry.
Note that only l2, l3 and userDefined could be set by user,
other is reserved for system to show information.
"
::= { aclProfileEntry 2 }
aclProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rules in this profile."
::= { aclProfileEntry 3 }
aclProfileMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC 0 (LSB)
L2 SRC_MAC 1
L2 VID 2
L2 8021P_PRIORITY 3
L2 ETHER_TYPE 4
L3 DSCP 5
L3 ICMP_TYPE 6
L3 ICMP_CODE 7
L3 IGMP_TYPE 8
L3 DST_IP 9
L3 SRC_IP 10
L3 DST_PORT 11
L3 SRC_PORT 12
L3 TCPFLAG 13
ARP-SP ARP_SENDER_MAC 14
ARP-SP ARP_SENDER_IP 15
L3 TRAFFIC_CLASS 21
L3 TOS 16
UDF UDF1 17
UDF UDF2 18
UDF UDF3 19
UDF UDF4 20
L3v6 TRAFFIC_CLASS 21
L3v6 DST_IPV6 22
L3v6 SRC_IPV6 23 (MSB)
-------------------------------------------
The value is in Hex format.
"
::= { aclProfileEntry 4 }
aclProfileDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile destination MAC address mask.
If DST_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
"
::= { aclProfileEntry 5 }
aclProfileSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile source MAC address mask.
If SRC_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
"
::= { aclProfileEntry 6 }
aclProfileIPProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17),
icmpv6(58)
,ipProtocolMask(256)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
"
::= { aclProfileEntry 7 }
aclProfileIPProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile IP protocol mask.
If aclProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { aclProfileEntry 8 }
aclProfileDstIpAddrMaskType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 Address type."
::= { aclProfileEntry 9 }
aclProfileDstIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile destination IP address mask.
If DST_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 10 }
aclProfileSrcIpAddrMaskType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 Address type."
::= { aclProfileEntry 11 }
aclProfileSrcIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile source IP address mask.
If SRC_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 12 }
aclProfileDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile UDP/TCP destination port mask.
If DST_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { aclProfileEntry 13 }
aclProfileSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile UDP/TCP source port mask.
If SRC_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { aclProfileEntry 14 }
aclProfileArpSenderMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile Sender MAC mask.
This is only for ARP Spoofing Prevention which is System-defined ACL,
and it's not allow to modify.
The value is in HEX format.
"
DEFVAL { 'FFFFFFFFFF'h }
::= { aclProfileEntry 15 }
aclProfileArpSenderIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile Sender IP mask.
This is only for ARP Spoofing Prevention which is System-defined ACL,
and it's not allow to modify.
The value is in HEX format.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 16 }
aclProfileUdfOffsetMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which Udf field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
UDF Offset1 0 (LSB)
UDF Offset2 1
UDF Offset3 2
UDF Offset4 3
-------------------------------------------
The value is in Hex format.
"
::= { aclProfileEntry 17 }
aclUdfOffsetChunk1 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset Chunk."
::= { aclProfileEntry 19 }
aclUdfOffsetMask1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 20 }
aclUdfOffsetChunk2 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset Chunk."
::= { aclProfileEntry 22 }
aclUdfOffsetMask2 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 23 }
aclUdfOffsetChunk3 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset Chunk."
::= { aclProfileEntry 25 }
aclUdfOffsetMask3 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 26 }
aclUdfOffsetChunk4 OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset Chunk."
::= { aclProfileEntry 28 }
aclUdfOffsetMask4 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of offset MAsk."
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 29 }
aclProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of aclProfileType,
aclProfileMask and ProtocolType are not conflicted.
"
::= { aclProfileEntry 30 }
-- ------------------------------------------------------------------
-- L2 Filter Group --------------------------------------------------
aclL2Rule OBJECT IDENTIFIER ::= { companyACLGroup 2 }
aclL2RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { aclL2Rule 1 }
aclL2RuleEntry OBJECT-TYPE
SYNTAX AclL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID."
INDEX {aclL2ProfileID, aclL2AccessID}
::= { aclL2RuleTable 1 }
AclL2RuleEntry ::=
SEQUENCE {
aclL2AccessID
Integer32,
aclL2ProfileID
Integer32,
aclL2RuleEtherType
Integer32,
aclL2RuleDstMacAddr
MacAddress,
aclL2RuleSrcMacAddr
MacAddress,
aclL2RuleVlanId
Integer32,
aclL2Rule1pPriority
Integer32,
aclL2RuleDstMacAddrMask
MacAddress,
aclL2RuleSrcMacAddrMask
MacAddress,
aclL2RuleAction
INTEGER,
aclL2RuleRateLimit
Unsigned32,
aclL2RuleReplaceDSCP
Integer32,
aclL2RuleReplace1P
Integer32,
aclL2RuleReplaceQueue
Integer32,
aclL2RuleFilterTimeRange
OCTET STRING,
aclL2RuleInPortList
PortList,
aclL2RuleInVlanList
OCTET STRING,
aclL2RuleVlanIdMask
OCTET STRING,
aclL2RuleStatus
RowStatus
}
aclL2AccessID OBJECT-TYPE
SYNTAX Integer32 (0..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2 Filter rule ID. 0 means auto assign."
::= { aclL2RuleEntry 1 }
aclL2ProfileID OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL Profile ID which this rule join."
DEFVAL { 1 }
::= { aclL2RuleEntry 2 }
aclL2RuleEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 1501..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 3 }
aclL2RuleDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition."
::= { aclL2RuleEntry 4 }
aclL2RuleSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address"
::= { aclL2RuleEntry 5 }
aclL2RuleVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 6 }
aclL2Rule1pPriority OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 7 }
aclL2RuleDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting."
::= { aclL2RuleEntry 8 }
aclL2RuleSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting."
::= { aclL2RuleEntry 9 }
aclL2RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
,mirror (3)
,rateLimit(4)
,replaceDSCP(5)
,replace1P(6)
,replaceQueue(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { aclL2RuleEntry 11 }
aclL2RuleRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for matched packet."
::= { aclL2RuleEntry 12 }
aclL2RuleReplaceDSCP OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched packet."
::= { aclL2RuleEntry 13 }
aclL2RuleReplace1P OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched packet."
::= { aclL2RuleEntry 14 }
aclL2RuleReplaceQueue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ACL L2 Rule Replace Queue."
::= { aclL2RuleEntry 15 }
aclL2RuleFilterTimeRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ACL L2 Filter Time Range"
::= { aclL2RuleEntry 16 }
aclL2RuleVlanIdMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { 'FFFF'h }
::= { aclL2RuleEntry 17 }
aclL2RuleInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list."
::= { aclL2RuleEntry 51 }
aclL2RuleInVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of Vlan over which this filter is applied
for packets ingress at vlan . Notice : Only support one VLAN."
::= { aclL2RuleEntry 52 }
aclL2RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL2RuleEntry 99 }
-- ------------------------------------------------------------------
-- L3 Filter Group --------------------------------------------------
aclL3Rule OBJECT IDENTIFIER ::= { companyACLGroup 3 }
aclL3RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { aclL3Rule 1 }
aclL3RuleEntry OBJECT-TYPE
SYNTAX AclL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID."
INDEX {aclL3RuleProfileNo, aclL3RuleAccessID }
::= { aclL3RuleTable 1 }
AclL3RuleEntry ::=
SEQUENCE {
aclL3RuleAccessID
Integer32,
aclL3RuleProfileNo
Integer32,
aclL3RuleProtocol
INTEGER,
aclL3RuleProtocolMask
OCTET STRING,
aclL3RuleICMPMessageType
Integer32,
aclL3RuleICMPMessageCode
Integer32,
aclL3RuleDstIpAddr
IpAddress,
aclL3RuleSrcIpAddr
IpAddress,
aclL3RuleDstIpAddrMask
IpAddress,
aclL3RuleSrcIpAddrMask
IpAddress,
aclL3RuleTcpUdpDstPort
Integer32,
aclL3RuleTcpUdpSrcPort
Integer32,
aclL3RuleTcpUdpDstPortMask
OCTET STRING,
aclL3RuleTcpUdpSrcPortMask
OCTET STRING,
aclL3RuleTcpAckBit
INTEGER,
aclL3RuleTcpRstBit
INTEGER,
aclL3RuleTcpUrgBit
INTEGER,
aclL3RuleTcpPshBit
INTEGER,
aclL3RuleTcpSynBit
INTEGER,
aclL3RuleTcpFinBit
INTEGER,
aclL3RuleDscp
Integer32,
aclL3RuleTos
Integer32,
aclL3RuleIgmpType
Integer32,
aclL3RuleAction
INTEGER,
aclL3RuleRateLimit
Unsigned32,
aclL3RuleReplaceDSCP
Integer32,
aclL3RuleReplace1P
Integer32,
aclL3RuleReplaceQueue
Integer32,
aclL3RuleFilterTimeRange
OCTET STRING,
aclL3RulePortList
PortList,
aclL3RuleVlanList
OCTET STRING,
aclL3RuleStatus
RowStatus
}
aclL3RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (0..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID. 0 means auto assign."
::= { aclL3RuleEntry 1 }
aclL3RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclL3RuleEntry 2 }
aclL3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
igmp(2),
tcp(6),
udp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { aclL3RuleEntry 3 }
aclL3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { aclL3RuleEntry 4 }
aclL3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclL3RuleEntry 5 }
aclL3RuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { aclL3RuleEntry 6 }
aclL3RuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3RuleEntry 7 }
aclL3RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3RuleEntry 8 }
aclL3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclL3RuleEntry 9 }
aclL3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclL3RuleEntry 10 }
aclL3RuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 11 }
aclL3RuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 12 }
aclL3RuleTcpUdpDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { aclL3RuleEntry 13 }
aclL3RuleTcpUdpSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { aclL3RuleEntry 14 }
aclL3RuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 15 }
aclL3RuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 16 }
aclL3RuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 17 }
aclL3RuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(-1). which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 18 }
aclL3RuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 19 }
aclL3RuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 20 }
aclL3RuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 21 }
aclL3RuleTos OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 22 }
aclL3RuleIgmpType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 23 }
aclL3RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
,mirror (3)
,rateLimit(4)
,replaceDSCP(5)
,replace1P(6)
,replaceQueue(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclL3RuleEntry 25 }
aclL3RuleRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for matched packet."
::= { aclL3RuleEntry 26 }
aclL3RuleReplaceDSCP OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ReplaceDSCP for matched packet."
::= { aclL3RuleEntry 27 }
aclL3RuleReplace1P OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ReplaceDSCP for matched packet."
::= { aclL3RuleEntry 28 }
aclL3RuleReplaceQueue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acl L3 Rule Replace Queue."
::= { aclL3RuleEntry 29 }
aclL3RuleFilterTimeRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ACL L3 Filter Time Range"
::= { aclL3RuleEntry 30 }
aclL3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { aclL3RuleEntry 51 }
aclL3RuleVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of vlan over which if the packet arrives
this filter rule will be applicable. Notice : only support one vlan."
::= { aclL3RuleEntry 52 }
aclL3RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL3RuleEntry 99 }
----------------------------------------------------------------------------------------
aclv6L3RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Aclv6L3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { aclL3Rule 2 }
aclv6L3RuleEntry OBJECT-TYPE
SYNTAX Aclv6L3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID."
INDEX {aclv6L3RuleProfileNo, aclv6L3RuleAccessID }
::= { aclv6L3RuleTable 1 }
Aclv6L3RuleEntry ::=
SEQUENCE {
aclv6L3RuleAccessID
Integer32,
aclv6L3RuleProfileNo
Integer32,
aclv6L3RuleProtocol
INTEGER,
aclv6L3RuleProtocolMask
OCTET STRING,
aclv6L3RuleICMPMessageType
Integer32,
aclv6L3RuleICMPMessageCode
Integer32,
aclv6L3RuleDstIpAddr
Ipv6Address,
aclv6L3RuleSrcIpAddr
Ipv6Address,
aclv6L3RuleDstIpAddrMask
Ipv6Address,
aclv6L3RuleSrcIpAddrMask
Ipv6Address,
aclv6L3RuleTcpUdpDstPort
Integer32,
aclv6L3RuleTcpUdpSrcPort
Integer32,
aclv6L3RuleTcpUdpDstPortMask
OCTET STRING,
aclv6L3RuleTcpUdpSrcPortMask
OCTET STRING,
aclv6L3RuleTcpAckBit
INTEGER,
aclv6L3RuleTcpRstBit
INTEGER,
aclv6L3RuleTcpUrgBit
INTEGER,
aclv6L3RuleTcpPshBit
INTEGER,
aclv6L3RuleTcpSynBit
INTEGER,
aclv6L3RuleTcpFinBit
INTEGER,
aclv6L3RuleTrafficClass
Integer32,
aclv6L3RuleAction
INTEGER,
aclv6L3RuleRateLimit
Unsigned32,
aclv6L3RuleReplaceDSCP
Integer32,
aclv6L3RuleReplace1P
Integer32,
aclv6L3RuleReplaceQueue
Integer32,
aclv6L3RuleFilterTimeRange
OCTET STRING,
aclv6L3RulePortList
PortList,
aclv6L3RuleVlanList
OCTET STRING,
aclv6L3RuleStatus
RowStatus
}
aclv6L3RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (0..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID. 0 means auto assign."
::= { aclv6L3RuleEntry 1 }
aclv6L3RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclv6L3RuleEntry 2 }
aclv6L3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
tcp(6),
udp(17),
icmpv6(58)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { aclv6L3RuleEntry 3 }
aclv6L3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { aclv6L3RuleEntry 4 }
aclv6L3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclv6L3RuleEntry 5 }
aclv6L3RuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { aclv6L3RuleEntry 6 }
aclv6L3RuleDstIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclv6L3RuleEntry 7 }
aclv6L3RuleSrcIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclv6L3RuleEntry 8 }
aclv6L3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclv6L3RuleEntry 9 }
aclv6L3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclv6L3RuleEntry 10 }
aclv6L3RuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclv6L3RuleEntry 11 }
aclv6L3RuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclv6L3RuleEntry 12 }
aclv6L3RuleTcpUdpDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { aclv6L3RuleEntry 13 }
aclv6L3RuleTcpUdpSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { aclv6L3RuleEntry 14 }
aclv6L3RuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclv6L3RuleEntry 15 }
aclv6L3RuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclv6L3RuleEntry 16 }
aclv6L3RuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclv6L3RuleEntry 17 }
aclv6L3RuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(-1). which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclv6L3RuleEntry 18 }
aclv6L3RuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this condition."
DEFVAL { dont-care }
::= { aclv6L3RuleEntry 19 }
aclv6L3RuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclv6L3RuleEntry 20 }
aclv6L3RuleTrafficClass OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { aclv6L3RuleEntry 21 }
aclv6L3RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
,mirror (3)
,rateLimit(4)
,replaceDSCP(5)
,replace1P(6)
,replaceQueue(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclv6L3RuleEntry 24 }
aclv6L3RuleRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for matched packet."
::= { aclv6L3RuleEntry 25 }
aclv6L3RuleReplaceDSCP OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched packet."
::= { aclv6L3RuleEntry 26 }
aclv6L3RuleReplace1P OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched packet."
::= { aclv6L3RuleEntry 27 }
aclv6L3RuleReplaceQueue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acl IPV6 L3 Rule Replace Queue."
::= { aclv6L3RuleEntry 28 }
aclv6L3RuleFilterTimeRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ACL IPV6 L3 Filter Time Range"
::= { aclv6L3RuleEntry 29 }
aclv6L3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { aclv6L3RuleEntry 51 }
aclv6L3RuleVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of vlan over which if the packet arrives
this filter rule will be applicable. Notice : only support one vlan."
::= { aclv6L3RuleEntry 52 }
aclv6L3RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclv6L3RuleEntry 99 }
-- ------------------------------------------------------------------
-- PacketContent Filter Group --------------------------------------------------
aclPacketRule OBJECT IDENTIFIER ::= { companyACLGroup 4 }
aclPacketRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclPacketRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure Packet Content filter rules in the system."
::= { aclPacketRule 1 }
aclPacketRuleEntry OBJECT-TYPE
SYNTAX AclPacketRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a Packet filter rule.
Index to the table is the Packet filter number and Profile ID."
INDEX {aclPacketProfileID, aclPacketAccessID}
::= { aclPacketRuleTable 1 }
AclPacketRuleEntry ::=
SEQUENCE {
aclPacketAccessID
Integer32,
aclPacketProfileID
Integer32,
aclPacketRuleOffsetValue1
OCTET STRING,
aclPacketRuleOffsetValue2
OCTET STRING,
aclPacketRuleOffsetValue3
OCTET STRING,
aclPacketRuleOffsetValue4
OCTET STRING,
aclPacketRuleAction
INTEGER,
aclPacketRuleRateLimit
Unsigned32,
aclPacketRuleReplaceDSCP
Integer32,
aclPacketRuleReplace1P
Integer32,
aclPacketRuleReplaceQueue
Integer32,
aclPacketRuleFilterTimeRange
OCTET STRING,
aclPacketRuleOffsetValue1Mask
OCTET STRING,
aclPacketRuleOffsetValue2Mask
OCTET STRING,
aclPacketRuleOffsetValue3Mask
OCTET STRING,
aclPacketRuleOffsetValue4Mask
OCTET STRING,
aclPacketRuleInPortList
PortList,
aclPacketRuleInVlanList
OCTET STRING,
aclPacketRuleStatus
RowStatus
}
aclPacketAccessID OBJECT-TYPE
SYNTAX Integer32 (0..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet Filter rule ID. 0 means auto assign."
::= { aclPacketRuleEntry 1 }
aclPacketProfileID OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL Profile ID which this rule join."
::= { aclPacketRuleEntry 2 }
aclPacketRuleOffsetValue1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter value of Offset 1."
::= { aclPacketRuleEntry 3 }
aclPacketRuleOffsetValue2 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter value of Offset 2."
::= { aclPacketRuleEntry 4 }
aclPacketRuleOffsetValue3 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter value of Offset 3."
::= { aclPacketRuleEntry 5 }
aclPacketRuleOffsetValue4 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter value of Offset 4."
::= { aclPacketRuleEntry 6 }
aclPacketRuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
,mirror (3)
,rateLimit(4)
,replaceDSCP(5)
,replace1P(6)
,replaceQueue(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { aclPacketRuleEntry 8 }
aclPacketRuleRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for matched packet."
::= { aclPacketRuleEntry 9 }
aclPacketRuleReplaceDSCP OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched packet."
::= { aclPacketRuleEntry 10 }
aclPacketRuleReplace1P OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace 1p for matched packet."
::= { aclPacketRuleEntry 11 }
aclPacketRuleReplaceQueue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acl Rule Replace Queue."
::= { aclPacketRuleEntry 12 }
aclPacketRuleFilterTimeRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Acl Filter Time Range"
::= { aclPacketRuleEntry 13 }
aclPacketRuleOffsetValue1Mask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter Mask of Offset 1."
DEFVAL { 'FFFF'h }
::= { aclPacketRuleEntry 14 }
aclPacketRuleOffsetValue2Mask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter Mask of Offset 2."
DEFVAL { 'FFFF'h }
::= { aclPacketRuleEntry 15 }
aclPacketRuleOffsetValue3Mask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter Mask of Offset 3."
DEFVAL { 'FFFF'h }
::= { aclPacketRuleEntry 16 }
aclPacketRuleOffsetValue4Mask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter Mask of Offset 4."
DEFVAL { 'FFFF'h }
::= { aclPacketRuleEntry 17 }
aclPacketRuleInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list."
::= { aclPacketRuleEntry 51 }
aclPacketRuleInVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of vlan over which this filter is applied
for packets ingress at vlan. Notice : Only support one vlan."
::= { aclPacketRuleEntry 52 }
aclPacketRuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclPacketRuleEntry 99 }
-- Flow Meter Group --------------------------------------------------
aclFlowMeterRule OBJECT IDENTIFIER ::= { companyACLGroup 10 }
aclFlowMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclFlowMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { aclFlowMeterRule 1 }
aclFlowMeterEntry OBJECT-TYPE
SYNTAX AclFlowMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID."
INDEX {aclFlowMeterProfileID, aclFlowMeterAccessID}
::= { aclFlowMeterTable 1 }
AclFlowMeterEntry ::=
SEQUENCE {
aclFlowMeterProfileID
Integer32,
aclFlowMeterAccessID
Integer32,
aclFlowMeterRate
Integer32,
aclFlowMeterBurstSize
Integer32,
aclFlowMeterReplaceDscp
Integer32,
aclFlowMeterAction
INTEGER,
aclFlowMeterStatus
RowStatus
}
aclFlowMeterProfileID OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL Profile ID which this flow meter join."
::= { aclFlowMeterEntry 1 }
aclFlowMeterAccessID OBJECT-TYPE
SYNTAX Integer32 (1..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL Access ID which this flow meter join."
::= { aclFlowMeterEntry 2 }
aclFlowMeterRate OBJECT-TYPE
SYNTAX Integer32 (64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limiter of meter."
::= { aclFlowMeterEntry 3 }
aclFlowMeterBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..1016)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The burst size of meter."
::= { aclFlowMeterEntry 4 }
aclFlowMeterReplaceDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched out-band packets when aclFlowMeterAction is replace DSCP."
::= { aclFlowMeterEntry 5 }
aclFlowMeterAction OBJECT-TYPE
SYNTAX INTEGER {
drop (2)
,replaceDSCP(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the out-band packet if the filter
rule matches.
If the action is 'drop', the packet will be discarded."
DEFVAL { drop }
::= { aclFlowMeterEntry 6 }
aclFlowMeterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclFlowMeterEntry 99 }
-- Vlan Based Profile Group --------------------------------------------------
-- aclVlanBasedProfile OBJECT IDENTIFIER ::= { companyACLGroup 20 }
--
-- aclVlanBasedProfileTable OBJECT-TYPE
--
-- SYNTAX SEQUENCE OF AclVlanBasedProfileEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table to configure L2 filter rules in the system."
-- ::= { aclVlanBasedProfile 1 }
--
-- aclVlanBasedProfileEntry OBJECT-TYPE
-- SYNTAX AclVlanBasedProfileEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Each entry in this table is a L2 filter rule.
-- Index to the table is the L2 filter number and Profile ID."
-- INDEX {aclVlanBasedProfileNo}
-- ::= { aclVlanBasedProfileTable 1 }
--
-- AclVlanBasedProfileEntry ::=
-- SEQUENCE {
-- aclVlanBasedProfileNo
-- Integer32,
-- aclVlanBasedProfileActiveVlan
-- Integer32,
-- aclVlanBasedProfileActivePortList
-- PortList
-- }
--
-- aclVlanBasedProfileNo OBJECT-TYPE
-- SYNTAX Integer32 (1..50)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "ACL Profile ID which this flow meter join."
-- ::= { aclVlanBasedProfileEntry 1 }
--
-- aclVlanBasedProfileActiveVlan OBJECT-TYPE
-- SYNTAX Integer32 (0..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "ACL Access ID which this flow meter join."
-- ::= { aclVlanBasedProfileEntry 2 }
--
-- aclVlanBasedProfileActivePortList OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The rate limiter of meter."
-- ::= { aclVlanBasedProfileEntry 3 }
-- ------------------------------------------------------------------
-- companyCPUInterfaceFilterGroup
-- ------------------------------------------------------------------
-- CPU Interface Filter Profile Group --------------------------------------------------
cpuFilterProfile OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 1 }
ipv4cpuFilterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4CpuFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to CPUInterfaceFilter profile .
"
::= { cpuFilterProfile 1 }
ipv4cpuFilterProfileEntry OBJECT-TYPE
SYNTAX Ipv4CpuFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a CPUInterfaceFilter profile.
Index to the table is CPUInterfaceFilter profile ID. "
INDEX { ipv4cpuFilterProfileNo}
::= { ipv4cpuFilterProfileTable 1 }
Ipv4CpuFilterProfileEntry ::=
SEQUENCE {
ipv4cpuFilterProfileNo
Integer32,
ipv4cpuFilterProfileType
INTEGER,
ipv4cpuFilterProfileRuleCount
Integer32,
ipv4cpuFilterProfileMask
OCTET STRING,
ipv4cpuFilterProfileDstMacAddrMask
MacAddress,
ipv4cpuFilterProfileSrcMacAddrMask
MacAddress,
ipv4cpuFilterProfileIPProtocol
INTEGER,
ipv4cpuFilterProfileIPProtocolMask
OCTET STRING,
ipv4cpuFilterProfileDstIpAddrMask
IpAddress,
ipv4cpuFilterProfileSrcIpAddrMask
IpAddress,
ipv4cpuFilterProfileDstPortMask
OCTET STRING,
ipv4cpuFilterProfileSrcPortMask
OCTET STRING,
ipv4cpuFilterProfileStatus
RowStatus
}
ipv4cpuFilterProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter,
and the ID more than 50 is reserved for system-defined CPUInterfaceFilter.
The user only allow to create user-defined CPUInterfaceFilter ID.
And system-defined CPUInterfaceFilter is read only."
::= { ipv4cpuFilterProfileEntry 1 }
ipv4cpuFilterProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3 (2),
l3v6 (11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
l3v6 (11) - for IPv6-based rule
"
::= { ipv4cpuFilterProfileEntry 2 }
ipv4cpuFilterProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rules in this profile."
::= { ipv4cpuFilterProfileEntry 3 }
ipv4cpuFilterProfileMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC 0 (LSB)
L2 SRC_MAC 1
L2 VID 2
L2 8021P_PRIORITY 3
L2 ETHER_TYPE 4
L3 DSCP 5
L3 ICMP_TYPE 6
L3 ICMP_CODE 7
L3 IGMP_TYPE 8
L3 DST_IP 9
L3 SRC_IP 10
L3 DST_PORT 11
L3 SRC_PORT 12
L3 TCPFLAG 13 (MSB)
-------------------------------------------
The value is in Hex format.
"
::= { ipv4cpuFilterProfileEntry 4 }
ipv4cpuFilterProfileDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile destination MAC address mask.
If DST_MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
"
::= { ipv4cpuFilterProfileEntry 5 }
ipv4cpuFilterProfileSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile source MAC address mask.
If SRC_MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
"
::= { ipv4cpuFilterProfileEntry 6 }
ipv4cpuFilterProfileIPProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17)
,ipMask(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
"
::= { ipv4cpuFilterProfileEntry 7 }
ipv4cpuFilterProfileIPProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile IP protocol mask.
If cpuFilterProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { ipv4cpuFilterProfileEntry 8 }
ipv4cpuFilterProfileDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile destination IP address mask.
If DST_IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { ipv4cpuFilterProfileEntry 9 }
ipv4cpuFilterProfileSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile source IP address mask.
If SRC_IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { ipv4cpuFilterProfileEntry 10 }
ipv4cpuFilterProfileDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile UDP/TCP destination port mask.
If DST_PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { ipv4cpuFilterProfileEntry 11 }
ipv4cpuFilterProfileSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile UDP/TCP source port mask.
If SRC_PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { ipv4cpuFilterProfileEntry 12 }
ipv4cpuFilterProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of cpuFilterProfileType,
cpuFilterProfileMask and ProtocolType are not conflicted.
"
::= { ipv4cpuFilterProfileEntry 15 }
-------------------------------------------------------------------------------------------
cpuFilterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to CPUInterfaceFilter profile .
"
::= { cpuFilterProfile 2 }
cpuFilterProfileEntry OBJECT-TYPE
SYNTAX CpuFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a CPUInterfaceFilter profile.
Index to the table is CPUInterfaceFilter profile ID. "
INDEX { cpuFilterProfileNo}
::= { cpuFilterProfileTable 1 }
CpuFilterProfileEntry ::=
SEQUENCE {
cpuFilterProfileNo
Integer32,
cpuFilterProfileType
INTEGER,
cpuFilterProfileRuleCount
Integer32,
cpuFilterProfileMask
OCTET STRING,
cpuFilterProfileDstMacAddrMask
MacAddress,
cpuFilterProfileSrcMacAddrMask
MacAddress,
cpuFilterProfileIPProtocol
INTEGER,
cpuFilterProfileIPProtocolMask
OCTET STRING,
cpuFilterProfileDstIpAddrMaskType
INTEGER,
cpuFilterProfileDstIpAddrMask
Ipv6Address,
cpuFilterProfileSrcIpAddrMaskType
INTEGER,
cpuFilterProfileSrcIpAddrMask
Ipv6Address,
cpuFilterProfileDstPortMask
OCTET STRING,
cpuFilterProfileSrcPortMask
OCTET STRING,
cpuFilterProfileStatus
RowStatus
}
cpuFilterProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter,
and the ID more than 50 is reserved for system-defined CPUInterfaceFilter.
The user only allow to create user-defined CPUInterfaceFilter ID.
And system-defined CPUInterfaceFilter is read only."
::= { cpuFilterProfileEntry 1 }
cpuFilterProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3 (2),
l3v6 (11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
l3v6 (11) - for IPv6-based rule
"
::= { cpuFilterProfileEntry 2 }
cpuFilterProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rules in this profile."
::= { cpuFilterProfileEntry 3 }
cpuFilterProfileMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC 0 (LSB)
L2 SRC_MAC 1
L2 VID 2
L2 8021P_PRIORITY 3
L2 ETHER_TYPE 4
L3 DSCP 5
L3 ICMP_TYPE 6
L3 ICMP_CODE 7
L3 IGMP_TYPE 8
L3 DST_IP 9
L3 SRC_IP 10
L3 DST_PORT 11
L3 SRC_PORT 12
L3 TCPFLAG 13 (MSB)
L3 TRAFFIC_CLASS 21
-------------------------------------------
The value is in Hex format.
"
::= { cpuFilterProfileEntry 4 }
cpuFilterProfileDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile destination MAC address mask.
If DST_MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
"
::= { cpuFilterProfileEntry 5 }
cpuFilterProfileSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile source MAC address mask.
If SRC_MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
"
::= { cpuFilterProfileEntry 6 }
cpuFilterProfileIPProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17)
,ipMask(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
"
::= { cpuFilterProfileEntry 7 }
cpuFilterProfileIPProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile IP protocol mask.
If cpuFilterProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { cpuFilterProfileEntry 8 }
cpuFilterProfileDstIpAddrMaskType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 Address type."
::= { cpuFilterProfileEntry 9 }
cpuFilterProfileDstIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile destination IP address mask.
If DST_IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterProfileEntry 10 }
cpuFilterProfileSrcIpAddrMaskType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 Address type."
::= { cpuFilterProfileEntry 11 }
cpuFilterProfileSrcIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile source IP address mask.
If SRC_IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterProfileEntry 12 }
cpuFilterProfileDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile UDP/TCP destination port mask.
If DST_PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { cpuFilterProfileEntry 13 }
cpuFilterProfileSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile UDP/TCP source port mask.
If SRC_PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { cpuFilterProfileEntry 14 }
cpuFilterProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of cpuFilterProfileType,
cpuFilterProfileMask and ProtocolType are not conflicted.
"
::= { cpuFilterProfileEntry 15 }
-- ------------------------------------------------------------------
-- L2 Filter Group --------------------------------------------------
cpuFilterL2Rule OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 2 }
cpuFilterL2RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { cpuFilterL2Rule 1 }
cpuFilterL2RuleEntry OBJECT-TYPE
SYNTAX CpuFilterL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID."
INDEX { cpuFilterL2ProfileID, cpuFilterL2AccessID}
::= { cpuFilterL2RuleTable 1 }
CpuFilterL2RuleEntry ::=
SEQUENCE {
cpuFilterL2ProfileID
Integer32,
cpuFilterL2AccessID
Integer32,
cpuFilterL2RuleEtherType
Integer32,
cpuFilterL2RuleDstMacAddr
MacAddress,
cpuFilterL2RuleSrcMacAddr
MacAddress,
cpuFilterL2RuleVlanId
Integer32,
cpuFilterL2Rule1pPriority
Integer32,
cpuFilterL2RuleDstMacAddrMask
MacAddress,
cpuFilterL2RuleSrcMacAddrMask
MacAddress,
cpuFilterL2RuleInPortList
PortList,
cpuFilterL2RuleAction
INTEGER,
cpuFilterL2RuleStatus
RowStatus
}
cpuFilterL2ProfileID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2 Filter rule ID."
::= { cpuFilterL2RuleEntry 1 }
cpuFilterL2AccessID OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPUInterfaceFilter Profile ID which this rule join."
DEFVAL { 1 }
::= { cpuFilterL2RuleEntry 2 }
cpuFilterL2RuleEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 1501..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition."
DEFVAL { -1 }
::= { cpuFilterL2RuleEntry 3 }
cpuFilterL2RuleDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition."
::= { cpuFilterL2RuleEntry 4 }
cpuFilterL2RuleSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address"
::= { cpuFilterL2RuleEntry 5 }
cpuFilterL2RuleVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL2RuleEntry 6 }
cpuFilterL2Rule1pPriority OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL2RuleEntry 7 }
cpuFilterL2RuleDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting."
::= { cpuFilterL2RuleEntry 8 }
cpuFilterL2RuleSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting."
::= { cpuFilterL2RuleEntry 9 }
cpuFilterL2RuleInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list."
::= { cpuFilterL2RuleEntry 10 }
cpuFilterL2RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { cpuFilterL2RuleEntry 11 }
cpuFilterL2RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { cpuFilterL2RuleEntry 14 }
-- ------------------------------------------------------------------
-- L3 Filter Group --------------------------------------------------
cpuFilterL3Rule OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 3 }
cpuFilterL3RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { cpuFilterL3Rule 1 }
cpuFilterL3RuleEntry OBJECT-TYPE
SYNTAX CpuFilterL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID."
INDEX { cpuFilterL3RuleProfileNo, cpuFilterL3RuleAccessID}
::= { cpuFilterL3RuleTable 1 }
CpuFilterL3RuleEntry ::=
SEQUENCE {
cpuFilterL3RuleProfileNo
Integer32,
cpuFilterL3RuleAccessID
Integer32,
cpuFilterL3RuleProtocol
INTEGER,
cpuFilterL3RuleProtocolMask
OCTET STRING,
cpuFilterL3RuleICMPMessageType
Integer32,
cpuFilterL3RuleICMPMessageCode
Integer32,
cpuFilterL3RuleDstIpAddr
IpAddress,
cpuFilterL3RuleSrcIpAddr
IpAddress,
cpuFilterL3RuleDstIpAddrMask
IpAddress,
cpuFilterL3RuleSrcIpAddrMask
IpAddress,
cpuFilterL3RuleTcpUdpDstPort
Integer32,
cpuFilterL3RuleTcpUdpSrcPort
Integer32,
cpuFilterL3RuleTcpUdpDstPortMask
OCTET STRING,
cpuFilterL3RuleTcpUdpSrcPortMask
OCTET STRING,
cpuFilterL3RuleTcpAckBit
INTEGER,
cpuFilterL3RuleTcpRstBit
INTEGER,
cpuFilterL3RuleTcpUrgBit
INTEGER,
cpuFilterL3RuleTcpPshBit
INTEGER,
cpuFilterL3RuleTcpSynBit
INTEGER,
cpuFilterL3RuleTcpFinBit
INTEGER,
cpuFilterL3RuleDscp
Integer32,
cpuFilterL3RuleIgmpType
Integer32,
cpuFilterL3RulePortList
PortList,
cpuFilterL3RuleAction
INTEGER,
cpuFilterL3RuleStatus
RowStatus
}
cpuFilterL3RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { cpuFilterL3RuleEntry 1 }
cpuFilterL3RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { cpuFilterL3RuleEntry 2 }
cpuFilterL3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
igmp(2),
tcp(6),
udp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { cpuFilterL3RuleEntry 3 }
cpuFilterL3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { cpuFilterL3RuleEntry 4 }
cpuFilterL3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 5 }
cpuFilterL3RuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 6 }
cpuFilterL3RuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { cpuFilterL3RuleEntry 7 }
cpuFilterL3RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { cpuFilterL3RuleEntry 8 }
cpuFilterL3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterL3RuleEntry 9 }
cpuFilterL3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterL3RuleEntry 10 }
cpuFilterL3RuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 11 }
cpuFilterL3RuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 12 }
cpuFilterL3RuleTcpUdpDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { cpuFilterL3RuleEntry 13 }
cpuFilterL3RuleTcpUdpSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { cpuFilterL3RuleEntry 14 }
cpuFilterL3RuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 15 }
cpuFilterL3RuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 16 }
cpuFilterL3RuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 17 }
cpuFilterL3RuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'dontcare'(-1). which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 18 }
cpuFilterL3RuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 19 }
cpuFilterL3RuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 20 }
cpuFilterL3RuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 21 }
cpuFilterL3RuleIgmpType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 22 }
cpuFilterL3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { cpuFilterL3RuleEntry 23 }
cpuFilterL3RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { cpuFilterL3RuleEntry 24 }
cpuFilterL3RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { cpuFilterL3RuleEntry 27 }
-- L3 IPv6 Filter Group --------------------------------------------------
cpuFilterv6L3RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterv6L3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { cpuFilterL3Rule 2 }
cpuFilterv6L3RuleEntry OBJECT-TYPE
SYNTAX CpuFilterv6L3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID."
INDEX { cpuFilterv6L3RuleProfileNo, cpuFilterv6L3RuleAccessID}
::= { cpuFilterv6L3RuleTable 1 }
CpuFilterv6L3RuleEntry ::=
SEQUENCE {
cpuFilterv6L3RuleProfileNo
Integer32,
cpuFilterv6L3RuleAccessID
Integer32,
cpuFilterv6L3RuleProtocol
INTEGER,
cpuFilterv6L3RuleProtocolMask
OCTET STRING,
cpuFilterv6L3RuleICMPMessageType
Integer32,
cpuFilterv6L3RuleICMPMessageCode
Integer32,
cpuFilterv6L3RuleDstIpAddr
Ipv6Address,
cpuFilterv6L3RuleSrcIpAddr
Ipv6Address,
cpuFilterv6L3RuleDstIpAddrMask
Ipv6Address,
cpuFilterv6L3RuleSrcIpAddrMask
Ipv6Address,
cpuFilterv6L3RuleTcpUdpDstPort
Integer32,
cpuFilterv6L3RuleTcpUdpSrcPort
Integer32,
cpuFilterv6L3RuleTcpUdpDstPortMask
OCTET STRING,
cpuFilterv6L3RuleTcpUdpSrcPortMask
OCTET STRING,
cpuFilterv6L3RuleTcpAckBit
INTEGER,
cpuFilterv6L3RuleTcpRstBit
INTEGER,
cpuFilterv6L3RuleTcpUrgBit
INTEGER,
cpuFilterv6L3RuleTcpPshBit
INTEGER,
cpuFilterv6L3RuleTcpSynBit
INTEGER,
cpuFilterv6L3RuleTcpFinBit
INTEGER,
cpuFilterv6L3RuleTrafficClass
Integer32,
cpuFilterv6L3RulePortList
PortList,
cpuFilterv6L3RuleAction
INTEGER,
cpuFilterv6L3RuleStatus
RowStatus
}
cpuFilterv6L3RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { cpuFilterv6L3RuleEntry 1 }
cpuFilterv6L3RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { cpuFilterv6L3RuleEntry 2 }
cpuFilterv6L3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
tcp(6),
udp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { cpuFilterv6L3RuleEntry 3 }
cpuFilterv6L3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { cpuFilterv6L3RuleEntry 4 }
cpuFilterv6L3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { cpuFilterv6L3RuleEntry 5 }
cpuFilterv6L3RuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { cpuFilterv6L3RuleEntry 6 }
cpuFilterv6L3RuleDstIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { cpuFilterv6L3RuleEntry 7 }
cpuFilterv6L3RuleSrcIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { cpuFilterv6L3RuleEntry 8 }
cpuFilterv6L3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterv6L3RuleEntry 9 }
cpuFilterv6L3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterv6L3RuleEntry 10 }
cpuFilterv6L3RuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterv6L3RuleEntry 11 }
cpuFilterv6L3RuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterv6L3RuleEntry 12 }
cpuFilterv6L3RuleTcpUdpDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { cpuFilterv6L3RuleEntry 13 }
cpuFilterv6L3RuleTcpUdpSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { cpuFilterv6L3RuleEntry 14 }
cpuFilterv6L3RuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterv6L3RuleEntry 15 }
cpuFilterv6L3RuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterv6L3RuleEntry 16 }
cpuFilterv6L3RuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterv6L3RuleEntry 17 }
cpuFilterv6L3RuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'dontcare'(-1). which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterv6L3RuleEntry 18 }
cpuFilterv6L3RuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this condition."
DEFVAL { dontcare }
::= { cpuFilterv6L3RuleEntry 19 }
cpuFilterv6L3RuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterv6L3RuleEntry 20 }
cpuFilterv6L3RuleTrafficClass OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { cpuFilterv6L3RuleEntry 21 }
cpuFilterv6L3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { cpuFilterv6L3RuleEntry 22 }
cpuFilterv6L3RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { cpuFilterv6L3RuleEntry 23 }
cpuFilterv6L3RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { cpuFilterv6L3RuleEntry 24 }
cpuFilterState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling CPU Interface Filter in the system."
DEFVAL { disable }
::= { companyCPUInterfaceFilterGroup 4 }
snmpGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP Community function."
::= { companySNMPV3 1 }
snmpV3User OBJECT IDENTIFIER ::= { companySNMPV3 2 }
snmpV3Group OBJECT IDENTIFIER ::= { companySNMPV3 3 }
snmpV3ViewTree OBJECT IDENTIFIER ::= { companySNMPV3 4 }
snmpV3Community OBJECT IDENTIFIER ::= { companySNMPV3 5 }
snmpV3Host OBJECT IDENTIFIER ::= { companySNMPV3 6 }
snmpV3EngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent's
own snmpEngineID value.
The value can also take the value of the snmpEngineID
of a remote SNMP engine with which this user can
communicate."
::= { companySNMPV3 7 }
snmpV3Trap OBJECT IDENTIFIER ::= { companySNMPV3 8 }
-- ----------------------------------------------------------------
-- The snmpV3User group
-- ----------------------------------------------------------------
snmpV3UserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3User 1 }
snmpV3UserEntry OBJECT-TYPE
SYNTAX SnmpV3UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3UserName , snmpV3UserVersion}
::= { snmpV3UserTable 1 }
SnmpV3UserEntry ::= SEQUENCE {
snmpV3UserName SnmpAdminString,
snmpV3UserVersion INTEGER,
snmpV3UserGroupName SnmpAdminString,
snmpV3UserAuthProtocol INTEGER,
snmpV3UserAuthProtocolPassword SnmpAdminString,
snmpV3UserPrivProtocol INTEGER,
snmpV3UserPrivProtocolPassword SnmpAdminString,
snmpV3UserStatus RowStatus
}
snmpV3UserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.
"
::= { snmpV3UserEntry 1 }
snmpV3UserVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.
"
::= { snmpV3UserEntry 2 }
snmpV3UserGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { snmpV3UserEntry 3 }
snmpV3UserAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (1),
md5 (2),
sha (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
UserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
NoAuthProtocol while the UserPrivProtocol value
in the same row is not equal to NoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the UserPrivProtocol is set
to the NoPrivProtocol value before it can set
the UserAuthProtocol value to NoAuthProtocol.
"
::= { snmpV3UserEntry 4 }
snmpV3UserAuthProtocolPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { snmpV3UserEntry 5 }
snmpV3UserPrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (1),
des (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than NoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.
"
::= { snmpV3UserEntry 6 }
snmpV3UserPrivProtocolPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { snmpV3UserEntry 7 }
snmpV3UserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified,
except for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.
"
::= { snmpV3UserEntry 8 }
-- ----------------------------------------------------------------
-- The snmpV3Group group
-- ----------------------------------------------------------------
snmpV3GroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3GroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3Group 1 }
snmpV3GroupEntry OBJECT-TYPE
SYNTAX SnmpV3GroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3GroupName ,snmpV3GroupSecurityModel ,snmpV3GroupSecurityLevel}
::= { snmpV3GroupTable 1 }
SnmpV3GroupEntry ::= SEQUENCE {
snmpV3GroupName SnmpAdminString,
snmpV3GroupSecurityModel INTEGER,
snmpV3GroupSecurityLevel SnmpSecurityLevel,
snmpV3GroupReadViewName SnmpAdminString,
snmpV3GroupWriteViewName SnmpAdminString,
snmpV3GroupNotifyViewName SnmpAdminString,
snmpV3GroupStatus RowStatus
}
snmpV3GroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { snmpV3GroupEntry 1 }
snmpV3GroupSecurityModel OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.
"
::= { snmpV3GroupEntry 2 }
snmpV3GroupSecurityLevel OBJECT-TYPE
SYNTAX SnmpSecurityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.
If multiple entries are equally indexed except for
this vacmAccessSecurityLevel index, then the entry
which has the highest value for
vacmAccessSecurityLevel is selected.
"
::= { snmpV3GroupEntry 3 }
snmpV3GroupReadViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpV3GroupEntry 4 }
snmpV3GroupWriteViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpV3GroupEntry 5 }
snmpV3GroupNotifyViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpV3GroupEntry 6 }
snmpV3GroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { snmpV3GroupEntry 7 }
-- ----------------------------------------------------------------
-- The snmpV3ViewTree group
-- ----------------------------------------------------------------
snmpV3ViewTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3ViewTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3ViewTree 1 }
snmpV3ViewTreeEntry OBJECT-TYPE
SYNTAX SnmpV3ViewTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3viewTreeName ,snmpV3viewTreeSubtree }
::= { snmpV3ViewTreeTable 1 }
SnmpV3ViewTreeEntry ::= SEQUENCE
{
snmpV3viewTreeName SnmpAdminString,
snmpV3viewTreeSubtree OBJECT IDENTIFIER,
snmpV3viewTreeMask OCTET STRING,
snmpV3viewTreeType INTEGER,
snmpV3viewTreeStatus RowStatus
}
snmpV3viewTreeName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The human readable name for a family of view subtrees.
"
::= { snmpV3ViewTreeEntry 1 }
snmpV3viewTreeSubtree OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MIB subtree which when combined with the
corresponding instance of vacmViewTreeFamilyMask
defines a family of view subtrees.
"
::= { snmpV3ViewTreeEntry 2 }
snmpV3viewTreeMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask which, in combination with the
corresponding instance of vacmViewTreeFamilySubtree,
defines a family of view subtrees.
Each bit of this bit mask corresponds to a
sub-identifier of vacmViewTreeFamilySubtree, with the
most significant bit of the i-th octet of this octet
string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier, and
the least significant bit of the i-th octet of this
octet string corresponding to the (8*i)-th
sub-identifier, where i is in the range 1 through 16.
Each bit of this bit mask specifies whether or not
the corresponding sub-identifiers must match when
determining if an OBJECT IDENTIFIER is in this
family of view subtrees; a '1' indicates that an
exact match must occur; a '0' indicates 'wild card',
i.e., any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object instance
is contained in a family of view subtrees if, for
each sub-identifier of the value of
vacmViewTreeFamilySubtree, either:
the i-th bit of vacmViewTreeFamilyMask is 0, or
the i-th sub-identifier of X is equal to the i-th
sub-identifier of the value of
vacmViewTreeFamilySubtree.
If the value of this bit mask is M bits long and
there are more than M sub-identifiers in the
corresponding instance of vacmViewTreeFamilySubtree,
then the bit mask is extended with 1's to be the
required length.
Note that when the value of this object is the
zero-length string, this extension rule results in
a mask of all-1's being used (i.e., no 'wild card'),
and the family of view subtrees is the one view
subtree uniquely identified by the corresponding
instance of vacmViewTreeFamilySubtree.
Note that masks of length greater than zero length
do not need to be supported. In this case this
object is made read-only.
"
-- DEFVAL { ''H }
::= { snmpV3ViewTreeEntry 3 }
snmpV3viewTreeType OBJECT-TYPE
SYNTAX INTEGER { included(1), excluded(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether the corresponding instances of
vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.
"
-- DEFVAL { included }
::= { snmpV3ViewTreeEntry 4 }
snmpV3viewTreeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { snmpV3ViewTreeEntry 5 }
-- ----------------------------------------------------------------
-- The snmpV3Community group
-- ----------------------------------------------------------------
snmpV3CommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3CommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3Community 1 }
snmpV3CommunityEntry OBJECT-TYPE
SYNTAX SnmpV3CommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3CommunityName }
::= { snmpV3CommunityTable 1 }
SnmpV3CommunityEntry ::= SEQUENCE
{
snmpV3CommunityName OCTET STRING,
snmpV3CommunityPolicy SnmpAdminString,
snmpV3CommunityStatus RowStatus
}
snmpV3CommunityName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { snmpV3CommunityEntry 1 }
snmpV3CommunityPolicy OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A human readable string representing the corresponding
value of snmpCommunityName in a Security Model
independent format."
::= { snmpV3CommunityEntry 2 }
snmpV3CommunityStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1)."
::= { snmpV3CommunityEntry 3 }
-- ----------------------------------------------------------------
-- The snmpV3Host group
-- ----------------------------------------------------------------
ipv4snmpV3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4snmpV3HostEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
::= { snmpV3Host 1 }
ipv4snmpV3HostEntry OBJECT-TYPE
SYNTAX Ipv4snmpV3HostEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
INDEX { ipv4snmpV3HostAddress }
::= { ipv4snmpV3HostTable 1 }
Ipv4snmpV3HostEntry ::= SEQUENCE
{
ipv4snmpV3HostAddress IpAddress,
ipv4snmpV3HostCommunityName SnmpAdminString,
ipv4snmpV3HostVersion INTEGER,
ipv4snmpV3HostStatus RowStatus
}
ipv4snmpV3HostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry."
::= { ipv4snmpV3HostEntry 1 }
ipv4snmpV3HostCommunityName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The locally arbitrary."
::= { ipv4snmpV3HostEntry 2 }
ipv4snmpV3HostVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3NoAuthNoPriv (3),
v3AuthNoPriv (4),
v3AuthPriv (5)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The Level of Security to be used when generating
SNMP messages using this entry."
::= { ipv4snmpV3HostEntry 3 }
ipv4snmpV3HostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
""
::= { ipv4snmpV3HostEntry 4 }
-- ----------------------------------------------------------------
-- The snmpV3Host group
-- ----------------------------------------------------------------
snmpV3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3Host 2 }
snmpV3HostEntry OBJECT-TYPE
SYNTAX SnmpV3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3HostAddress, snmpV3IPType }
::= { snmpV3HostTable 1 }
SnmpV3HostEntry ::= SEQUENCE
{
snmpV3HostAddress Ipv6Address,
snmpV3IPType INTEGER,
snmpV3HostCommunityName SnmpAdminString,
snmpV3HostVersion INTEGER,
snmpV3HostInterfaceName OCTET STRING,
snmpV3HostStatus RowStatus
}
snmpV3HostAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry."
::= { snmpV3HostEntry 1 }
snmpV3IPType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of IP interface."
::= { snmpV3HostEntry 2 }
snmpV3HostCommunityName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The locally arbitrary."
::= { snmpV3HostEntry 3 }
snmpV3HostVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3NoAuthNoPriv (3),
v3AuthNoPriv (4),
v3AuthPriv (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Level of Security to be used when generating
SNMP messages using this entry."
::= { snmpV3HostEntry 4 }
snmpV3HostInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the interface name when the syslogSrvIP is linklocal address."
::= { snmpV3HostEntry 5 }
snmpV3HostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snmpV3HostEntry 6 }
-- ----------------------------------------------------------------
-- The snmpV3Trap group
-- ----------------------------------------------------------------
snmpV3TrapSNMPAuthentication OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP login fail
event trap in the system."
::= { snmpV3Trap 1 }
snmpV3TrapColdStart OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling devie Bootup event
trap in the system."
::= { snmpV3Trap 2 }
snmpV3TrapWarmStart OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling devie Bootup event
trap in the system."
::= { snmpV3Trap 3 }
snmpV3TrapLinkUpDown OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Copper link up / link down
event trap in the system."
::= { snmpV3Trap 4 }
snmpV3TrapRSTPStateChange OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling RSTP topology change
event trap in the system."
::= { snmpV3Trap 5 }
snmpV3TrapFirmUpgrade OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Firmware upgrade
suess or fail event trap in the system."
::= { snmpV3Trap 6 }
snmpV3TrapBPDUAttack OBJECT-TYPE
SYNTAX INTEGER {
none(1),
attackDetected(2),
attackCleared(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure trap settings for BPDU attack protection events."
DEFVAL { none }
::= { snmpV3Trap 11 }
-- start CAMEO_PORT_SECURITY
snmpV3TrapPortSecurity OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { snmpV3Trap 12 }
-- end CAMEO_PORT_SECURITY
-- start CAMEO_IMPBv2
snmpV3TrapIMPBViolation OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { snmpV3Trap 13 }
-- end CAMEO_IMPBv2
-- start CAMEO_LBD
snmpV3TrapLBD OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { snmpV3Trap 14 }
-- end CAMEO_LBD
-- start CAMEO_DHCP_SCREEN
snmpV3TrapDHCPServerScreening OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { snmpV3Trap 15 }
-- end CAMEO_DHCP_SCREEN
snmpV3TrapDuplicateIPDetected OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling send gratuitous
trap when IP address conflicted in the network."
::= { snmpV3Trap 16 }
snmpV3CommunityEncryption OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling community encryption."
::= { companySNMPV3 9 }
traps OBJECT IDENTIFIER ::= { companyTraps 0 }
snmpTrapSNMPAuthentication NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapSNMPAuthentication."
::= { traps 1 }
snmpTrapColdStart NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapColdStart."
::= { traps 2 }
snmpTrapWarmStart NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapWarmStart."
::= { traps 3 }
snmpTrapCopperLinkUpDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapCopperLinkUpDown."
::= { traps 4 }
snmpTrapRSTPStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapRSTPStateChange."
::= { traps 5 }
snmpTrapFirmUpgrade NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapFirmUpgrade."
::= { traps 6 }
snmpTrapBPDUAttack NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapBPDUAttack."
::= { traps 11 }
snmpTrapPortSecurity NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapPortSecurity."
::= { traps 12 }
snmpTrapIMPBv2 NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapIMPBv2."
::= { traps 13 }
snmpTrapLBD NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapLBD."
::= { traps 14 }
snmpTrapDHCPScreen NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapDHCPScreen."
::= { traps 15 }
snmpTrapGratuitousArp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SnmpV3TrapGratuitousArp."
::= { traps 16 }
macNotificatiotn NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap indicates the MAC address variations in the address table . "
::= { traps 17 }
duplicateIP NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" duplicateIP . "
::= { traps 21 }
trafficControl NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" trafficControl. "
::= { traps 22 }
topologyChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" topologyChange. "
::= { traps 23 }
newRootBrgaddress NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" newRootBrgaddress. "
::= { traps 24 }
newRootOlddesignatedroot NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" newRootOlddesignatedroot. "
::= { traps 25 }
newRootMSTibridgeregionalroot NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" topologyChange. "
::= { traps 26 }
-- ------------------------------------------------------------------
-- companySyslog
-- ------------------------------------------------------------------
syslogSettingGroup OBJECT IDENTIFIER ::= { companySyslog 1 }
syslogEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling syslog alert features in
the system and the syslog will save to flash or send to remote
syslog server.
System Logs record and manage events, as well as report errors and
informational messages."
DEFVAL { disabled }
::= { syslogSettingGroup 1 }
syslogSaveMode OBJECT-TYPE
SYNTAX INTEGER {
onDemand(0),
timeInterval(1),
logTrigger(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for choosing the method to save syslog into flash."
DEFVAL { logTrigger }
::= { syslogSettingGroup 2 }
syslogSaveMinutes OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When savemode is time interval, it's used to set the interval minutes of
system save syslog to flash."
DEFVAL { 30 }
::= { syslogSettingGroup 3 }
-- ------------------------------------------------------------------
-- smtpRecvMailAddrTable
-- ------------------------------------------------------------------
ipv4syslogServerGroup OBJECT IDENTIFIER ::= { companySyslog 2 }
ipv4syslogServTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4SyslogServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of syslog remote server."
::= { ipv4syslogServerGroup 1 }
ipv4syslogServEntry OBJECT-TYPE
SYNTAX Ipv4SyslogServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of syslog remote server entry."
INDEX { ipv4syslogServIndex }
::= { ipv4syslogServTable 1 }
Ipv4SyslogServEntry ::=
SEQUENCE {
ipv4syslogServIndex INTEGER,
ipv4syslogServAddr IpAddress,
ipv4syslogServSeverity INTEGER,
ipv4syslogServFacility INTEGER,
ipv4syslogServUDPport INTEGER,
ipv4syslogServSrvStatus INTEGER,
ipv4syslogServSrvRowStatus RowStatus
}
ipv4syslogServIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of syslog remote server."
::= { ipv4syslogServEntry 1 }
ipv4syslogServAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of syslog remote server."
::= { ipv4syslogServEntry 2 }
ipv4syslogServSeverity OBJECT-TYPE
SYNTAX INTEGER{
warning(4), -- For logging warning messages.
information(6), -- For logging informational messages.
all(7) -- For logging debug messages.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the log level option to be set for a specific server."
::= { ipv4syslogServEntry 3 }
ipv4syslogServFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server."
DEFVAL { local0 }
::= { ipv4syslogServEntry 4 }
ipv4syslogServUDPport OBJECT-TYPE
SYNTAX INTEGER (514 | 6000..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
::= { ipv4syslogServEntry 5 }
ipv4syslogServSrvStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status for this server. If enable, system will send message to
this server."
::= { ipv4syslogServEntry 6 }
ipv4syslogServSrvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this server entry."
::= { ipv4syslogServEntry 7 }
-- ------------------------------------------------------------------
-- syslogServTable
-- ------------------------------------------------------------------
syslogServerGroup OBJECT IDENTIFIER ::= { companySyslog 3 }
syslogServTable OBJECT-TYPE
SYNTAX SEQUENCE OF SyslogServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of syslog remote server."
::= { syslogServerGroup 1 }
syslogServEntry OBJECT-TYPE
SYNTAX SyslogServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of syslog remote server entry."
INDEX { syslogServIndex }
::= { syslogServTable 1 }
SyslogServEntry ::=
SEQUENCE {
syslogServIndex INTEGER,
syslogServAddrType INTEGER,
syslogServAddr Ipv6Address,
syslogServInterfaceName OCTET STRING,
syslogServSeverity INTEGER,
syslogServFacility INTEGER,
syslogServUDPport INTEGER,
syslogServSrvStatus INTEGER,
syslogServSrvRowStatus RowStatus
}
syslogServIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of syslog remote server."
::= { syslogServEntry 1 }
syslogServAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the Address type of server.Address type shall be ipv4 or ipv6."
::= { syslogServEntry 2 }
syslogServAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the ServerIP to which the syslog shall be forwarded."
::= { syslogServEntry 3 }
syslogServInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the interface name when the syslogServInterfaceName is linklocal address."
::= { syslogServEntry 4 }
syslogServSeverity OBJECT-TYPE
SYNTAX INTEGER{
warning(4), -- For logging warning messages.
information(6), -- For logging informational messages.
all(7) -- For logging debug messages.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the log level option to be set for a specific server."
::= { syslogServEntry 5 }
syslogServFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server."
DEFVAL { local0 }
::= { syslogServEntry 6 }
syslogServUDPport OBJECT-TYPE
SYNTAX INTEGER (514 | 6000..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
::= { syslogServEntry 7 }
syslogServSrvStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status for this server. If enable, system will send message to
this server."
::= { syslogServEntry 8 }
syslogServSrvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this server entry."
::= { syslogServEntry 9 }
-- LBD Group ------------------------------------------------------
sysLBDStateEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Loopback detection function.
The Loopback Detection function is used to detect the loop created
by a specific port while Spanning Tree Protocol (STP) is not
enabled in the network, especially when the down links are hubs
or unmanaged switchs.The Switch will automatically shutdown the
port and sends a log to the administrator."
DEFVAL { disabled }
::= { companyLBD 1 }
sysLBDMode OBJECT-TYPE
SYNTAX INTEGER {
port(1),
vlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback detection function mode."
DEFVAL { port }
::= { companyLBD 2 }
sysLBDInterval OBJECT-TYPE
SYNTAX Integer32 (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a Loop detection Interval between 1 and 32767 seconds.
The default is 2 seconds.
This time interval to be used at counting time seconds to
resend the CTP packet automatically."
DEFVAL { 2 }
::= { companyLBD 3 }
sysLBDRecoverTime OBJECT-TYPE
SYNTAX Integer32 (0 | 60..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This time interval to be used at counting time seconds to
recover the disabled port automatically.
The Loop Detection Recover Time can be set at 0 seconds,
or 60 to 1000000 seconds.
Entering 0 will disable the Loop Detection Recover Time.
The default is 60 seconds."
DEFVAL { 60 }
::= { companyLBD 4 }
-- LBD Port Control Table
sysLBDCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLBDCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control Loopback detection features either for
the entire switch or for each interface in the switch."
::= { companyLBD 5 }
sysLBDCtrlEntry OBJECT-TYPE
SYNTAX SysLBDCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { sysLBDCtrlIndex }
::= { sysLBDCtrlTable 1 }
SysLBDCtrlEntry ::=
SEQUENCE {
sysLBDCtrlIndex
Integer32,
sysLBDPortStatus
INTEGER,
sysLBDPortLoopStatus
INTEGER
}
sysLBDCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number."
::= { sysLBDCtrlEntry 1 }
sysLBDPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to per port enable or disable the loopback detection
function. Default is disabled."
DEFVAL { disabled }
::= { sysLBDCtrlEntry 2 }
sysLBDPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
loop(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The loop status for this port."
::= { sysLBDCtrlEntry 3 }
-- LBD Vlan Loop Table
sysLBDVlanLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLBDVlanLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to display Loopback detection features by vlan
mode ."
::= { companyLBD 6 }
sysLBDVlanLoopEntry OBJECT-TYPE
SYNTAX SysLBDVlanLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { sysLBDVlanLoopIndex }
::= { sysLBDVlanLoopTable 1 }
SysLBDVlanLoopEntry ::=
SEQUENCE {
sysLBDVlanLoopIndex
Integer32,
sysLBDVlanLoopPorts
PortList
}
sysLBDVlanLoopIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display port lists loop status by vlan."
::= { sysLBDVlanLoopEntry 1 }
sysLBDVlanLoopPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display port lists loop status by vlan."
::= { sysLBDVlanLoopEntry 2 }
-- ------------------------------------------------------------------
-- Mirror Group
-- ------------------------------------------------------------------
sysMirrorStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Port Mirroring function.
Default is disabled.
Port Mirroring is a method of monitoring network traffic that
forwards a copy of each incoming and/or outgoing packet from one
port of the Switch to another port where the packet can be studied."
-- "Provides control over the mirroring feature in the switch." --
DEFVAL { disabled }
::= { companyMirror 1 }
sysMirrorTargetPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port to which the mirrored traffic in the system
is to be copied."
::= { companyMirror 2 }
sysMirrorCtrlIngressMirroring OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port."
::= { companyMirror 3 }
sysMirrorCtrlEgressMirroring OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port."
::= { companyMirror 4 }
-- ------------------------------------------------------------------
-- SNTP Timesetting
-- ------------------------------------------------------------------
ipv4sysSNTPTimeSeconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object is for setting the system time in seconds
from Epoch (00:00:00 UTC, January 1, 2009). Notice :
input value must larger than 1230768000 (00:00:00 UTC,
January 1, 2009) and smaller than 2145916799 (23:59:59
UTC, December 31, 2037)."
::= { companySNTPSetting 1 }
ipv4sysSNTPFirstServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"SNTP First Server's IP Address"
::= { companySNTPSetting 2 }
ipv4sysSNTPSecondServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"SNTP Second Server's IP Address"
::= { companySNTPSetting 3 }
ipv4sysSNTPPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"SNTP Poll Interval In Seconds (30-99999) "
::= { companySNTPSetting 4 }
ipv4sysSNTPState OBJECT-TYPE
SYNTAX INTEGER {
sntp(1),
local(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Enable/Disable SNTP function in the system."
::= { companySNTPSetting 5 }
-- SNTP TimeZonesetting
ipv4sysSNTPDSTOffset OBJECT-TYPE
SYNTAX INTEGER {
offset30min (30),
offset60min (60),
offset90min (90),
offset120min (120)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object is for Daylight Saving Time Offset In (30/60/90/120) Minutes."
::= { companySNTPSetting 6 }
ipv4sysSNTPGMTMinutes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)"
::= { companySNTPSetting 7 }
ipv4sysSNTPDSTStartMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The start month of Daylight Saving Time."
::= { companySNTPSetting 8 }
ipv4sysSNTPDSTStartDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The start day of Daylight Saving Time."
::= { companySNTPSetting 9 }
ipv4sysSNTPDSTStartHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The start hour of Daylight Saving Time."
::= { companySNTPSetting 10 }
ipv4sysSNTPDSTStartMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The start minute of Daylight Saving Time."
::= { companySNTPSetting 11 }
ipv4sysSNTPDSTEndMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The end month of Daylight Saving Time."
::= { companySNTPSetting 12 }
ipv4sysSNTPDSTEndDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The end day of Daylight Saving Time."
::= { companySNTPSetting 13 }
ipv4sysSNTPDSTEndHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The end hour of Daylight Saving Time."
::= { companySNTPSetting 14 }
ipv4sysSNTPDSTEndMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The end minute of Daylight Saving Time."
::= { companySNTPSetting 15 }
ipv4sysSNTPDSTState OBJECT-TYPE
SYNTAX INTEGER {
annual(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object is for Annual(1) or Disabled(2) DST state in the system."
::= { companySNTPSetting 16 }
--IPv6 sntp server Table
sysSNTPServerTable OBJECT IDENTIFIER ::= { companySNTPSetting 17 }
sysSNTPTimeSeconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for setting the system time in seconds
from Epoch (00:00:00 UTC, January 1, 2009). Notice :
input value must larger than 1230768000 (00:00:00 UTC,
January 1, 2009) and smaller than 2145916799 (23:59:59
UTC, December 31, 2037)."
::= { sysSNTPServerTable 1 }
sysSNTPFirstServer OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP First Server's IPv6 Address"
::= { sysSNTPServerTable 2 }
sysSNTPFirstType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP First Server's IPv6 Address type."
::= { sysSNTPServerTable 3 }
sysSNTPFirstInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name when the sysSNTPFirstServer is linklocal address."
::= { sysSNTPServerTable 4 }
sysSNTPSecondServer OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Second Server's IPv6 Address"
::= { sysSNTPServerTable 5 }
sysSNTPSecondType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP First Server's IPv6 Address type."
::= { sysSNTPServerTable 6 }
sysSNTPSecondInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name when the sysSNTPSecondServer is linklocal address."
::= { sysSNTPServerTable 7 }
sysSNTPPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Poll Interval In Seconds (30-99999) "
::= { sysSNTPServerTable 8 }
sysSNTPState OBJECT-TYPE
SYNTAX INTEGER {
sntp(1),
local(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SNTP function in the system."
::= { sysSNTPServerTable 9 }
-- SNTPv6 TimeZonesetting
sysSNTPDSTOffset OBJECT-TYPE
SYNTAX INTEGER {
offset30min (30),
offset60min (60),
offset90min (90),
offset120min (120)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Daylight Saving Time Offset
In (30/60/90/120) Minutes."
::= { sysSNTPServerTable 10 }
sysSNTPGMTMinutes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)"
::= { sysSNTPServerTable 11 }
sysSNTPDSTStartMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start month of Daylight Saving Time."
::= { sysSNTPServerTable 12 }
sysSNTPDSTStartDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start day of Daylight Saving Time."
::= { sysSNTPServerTable 13 }
sysSNTPDSTStartHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start hour of Daylight Saving Time."
::= { sysSNTPServerTable 14 }
sysSNTPDSTStartMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start minute of Daylight Saving Time."
::= { sysSNTPServerTable 15 }
sysSNTPDSTEndMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end month of Daylight Saving Time."
::= { sysSNTPServerTable 16 }
sysSNTPDSTEndDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end day of Daylight Saving Time."
::= { sysSNTPServerTable 17 }
sysSNTPDSTEndHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end hour of Daylight Saving Time."
::= { sysSNTPServerTable 18 }
sysSNTPDSTEndMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end minute of Daylight Saving Time."
::= { sysSNTPServerTable 19 }
sysSNTPDSTState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Enabled(1) or Disabled(2) DST state in the system."
::= { sysSNTPServerTable 20 }
sysSNTPDSTMethod OBJECT-TYPE
SYNTAX INTEGER {
annual(1),
repeating(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Annual(1) or Repeating(2) DST method in the system."
::= { sysSNTPServerTable 30 }
sysSNTPDSTRepeatStartMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start month of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 31 }
sysSNTPDSTRepeatStartWeek OBJECT-TYPE
SYNTAX INTEGER {
last(0),
first(1),
second(2),
third(3),
fourth(4),
fifth(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start week of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 32 }
sysSNTPDSTRepeatStartWeekDay OBJECT-TYPE
SYNTAX INTEGER {
sun(0),
mon(1),
tue(2),
wed(3),
thu(4),
fri(5),
sat(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start weekday of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 33 }
sysSNTPDSTRepeatStartHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start hour of Daylight Saving Time in Repeating mode.."
::= { sysSNTPServerTable 34 }
sysSNTPDSTRepeatStartMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start minute of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 35 }
sysSNTPDSTRepeatEndMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end month of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 36 }
sysSNTPDSTRepeatEndWeek OBJECT-TYPE
SYNTAX INTEGER {
last(0),
first(1),
second(2),
third(3),
fourth(4),
fifth(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end week of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 37 }
sysSNTPDSTRepeatEndWeekDay OBJECT-TYPE
SYNTAX INTEGER {
sun(0),
mon(1),
tue(2),
wed(3),
thu(4),
fri(5),
sat(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end weekday of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 38 }
sysSNTPDSTRepeatEndHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end hour of Daylight Saving Time in Repeating mode.."
::= { sysSNTPServerTable 39 }
sysSNTPDSTRepeatEndMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end minute of Daylight Saving Time in Repeating mode."
::= { sysSNTPServerTable 40 }
-- ------------------------------------------------------------------
-- Limit IP multicast Group
-- ------------------------------------------------------------------
limitIpMulticastProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF LimitIpMulticastProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the limit ip multicast Profile Table."
::= { companyLimitIp 1 }
limitIpMulticastProfileEntry OBJECT-TYPE
SYNTAX LimitIpMulticastProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A limit ip multicast entry maintain by the start IP Address, end ip address, profile id."
INDEX { limitIpMulticastIPType, limitIpMulticastProfileID }
::= { limitIpMulticastProfileTable 1 }
LimitIpMulticastProfileEntry ::= SEQUENCE {
limitIpMulticastIPType INTEGER,
limitIpMulticastProfileID INTEGER,
limitIpMulticastProfileName DisplayString,
limitIpMulticastProfileStatus RowStatus
}
limitIpMulticastIPType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the IP type of profile."
::= { limitIpMulticastProfileEntry 1 }
limitIpMulticastProfileID OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ProfileID of the limit ip multicast profile entry."
::= { limitIpMulticastProfileEntry 2 }
limitIpMulticastProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ProfileName of the limit ip multicast profile entry."
::= { limitIpMulticastProfileEntry 3 }
limitIpMulticastProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the limit ip multicast profile Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { limitIpMulticastProfileEntry 4 }
limitIpMulticastEntryTable OBJECT-TYPE
SYNTAX SEQUENCE OF LimitIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the limit ip multicast entry Table."
::= { companyLimitIp 2 }
limitIpMulticastEntry OBJECT-TYPE
SYNTAX LimitIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A limit ip multicast entry maintain by the start IP Address, end ip address, profile id."
INDEX { limitIpMulticastEntryIPType, limitIpMulticastEntryProfileID, limitIpMulticaststartIpAddr, limitIpMulticastendIpAddr}
::= { limitIpMulticastEntryTable 1 }
LimitIpMulticastEntry ::= SEQUENCE {
limitIpMulticastEntryIPType INTEGER,
limitIpMulticastEntryProfileID INTEGER,
limitIpMulticaststartIpAddr DisplayString,
limitIpMulticastendIpAddr DisplayString,
limitIpMulticastStatus RowStatus
}
limitIpMulticastEntryIPType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the IP type of entry."
::= { limitIpMulticastEntry 1 }
limitIpMulticastEntryProfileID OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ProfileID of the limit ip multicast entry."
::= { limitIpMulticastEntry 2 }
limitIpMulticaststartIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The limit ip multicast IP address is used to set start ip"
::= { limitIpMulticastEntry 3 }
limitIpMulticastendIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The limit ip multicast IP address is used to set end ip"
::= { limitIpMulticastEntry 4 }
limitIpMulticastStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the limit ip multicast entry Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { limitIpMulticastEntry 5 }
limitIpMulticastPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LimitIpMulticastPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the limit ip multicast Port entry Table."
::= { companyLimitIp 3 }
limitIpMulticastPortEntry OBJECT-TYPE
SYNTAX LimitIpMulticastPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A limit ip multicast entry maintain by the Port Index."
INDEX { limitIpMulticastPortIPType, limitIpMulticastPortID }
::= { limitIpMulticastPortTable 1 }
LimitIpMulticastPortEntry ::= SEQUENCE {
limitIpMulticastPortIPType INTEGER,
limitIpMulticastPortID INTEGER,
limitIpMulticastPortState INTEGER,
limitIpMulticastPortProfileID PortList,
limitIpMulticastPortMaxGrp INTEGER
}
limitIpMulticastPortIPType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the IP type of entry."
::= { limitIpMulticastPortEntry 1 }
limitIpMulticastPortID OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Index of the limit ip multicast port entry.
For all machines give maximum port number."
::= { limitIpMulticastPortEntry 2 }
limitIpMulticastPortState OBJECT-TYPE
SYNTAX INTEGER {
permit (1), deny (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limit ip multicast port state"
::= { limitIpMulticastPortEntry 3 }
limitIpMulticastPortProfileID OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limit ip multicast port mapping profileID list."
::= { limitIpMulticastPortEntry 4 }
limitIpMulticastPortMaxGrp OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limit ip multicast per-port max group."
::= { limitIpMulticastPortEntry 5 }
-- -----------------------------------------------------------------------------
-- The Guest Vlan Group
-- -----------------------------------------------------------------------------
guestVlanName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN name of guest VLAN."
::= { companyGuestVlan 1 }
guestVlanPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the guest VLAN port members of this device."
::= { companyGuestVlan 2 }
guestVlanDelState OBJECT-TYPE
SYNTAX INTEGER{
none(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to delete the guest VLAN."
::= { companyGuestVlan 3 }
-- -----------------------------------------------------------------------------
-- The Protocol Group Name Table
-- -----------------------------------------------------------------------------
protocolGroupNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtocolGroupNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control protocol group name features of the device."
::= { companyProtocolVlan 1 }
protocolGroupNameEntry OBJECT-TYPE
SYNTAX ProtocolGroupNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in protocol group name table for each interface
in the system."
INDEX {protocolGroupGID}
::= { protocolGroupNameTable 1 }
ProtocolGroupNameEntry ::=
SEQUENCE {
protocolGroupGID
Integer32,
protocolGroupName
DisplayString
}
protocolGroupGID OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group ID of protocol group name table."
::= { protocolGroupNameEntry 1 }
protocolGroupName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The group name of protocol group name table."
::= { protocolGroupNameEntry 2 }
-- -----------------------------------------------------------------------------
-- The Protocol Group Table
-- -----------------------------------------------------------------------------
protocolGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control protocol group features of the device."
::= { companyProtocolVlan 2 }
protocolGroupEntry OBJECT-TYPE
SYNTAX ProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in protocol group table for each interface
in the system."
INDEX {protocolGroupId, protocolGroupFrameType, protocolGroupProtocolValue}
::= { protocolGroupTable 1 }
ProtocolGroupEntry ::=
SEQUENCE {
protocolGroupId
Integer32,
protocolGroupFrameType
INTEGER,
protocolGroupProtocolValue
Integer32,
protocolGroupRowStatus
RowStatus
}
protocolGroupId OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group ID of protocol group table."
::= { protocolGroupEntry 1 }
protocolGroupFrameType OBJECT-TYPE
SYNTAX INTEGER {
ethernet (1),
ieee8023-snap (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame type of protocol group table."
::= { protocolGroupEntry 2 }
protocolGroupProtocolValue OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol value of protocol group table."
::= { protocolGroupEntry 3 }
protocolGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of protocol group table."
::= { protocolGroupEntry 99 }
-- -----------------------------------------------------------------------------
-- The Protocol Vlan Table
-- -----------------------------------------------------------------------------
protocolVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtocolVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control protocol vlan features of the device."
::= { companyProtocolVlan 3 }
protocolVlanEntry OBJECT-TYPE
SYNTAX ProtocolVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in protocol vlan table for each interface
in the system."
INDEX {protocolVlanPort, protocolVlanVID, protocolVlanGroupID}
::= { protocolVlanTable 1 }
ProtocolVlanEntry ::=
SEQUENCE {
protocolVlanPort
Integer32,
protocolVlanVID
Integer32,
protocolVlanGroupID
Integer32,
protocolVlanRowStatus
RowStatus
}
protocolVlanPort OBJECT-TYPE
SYNTAX Integer32 (1..28)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of protocol vlan table."
::= { protocolVlanEntry 1 }
protocolVlanVID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan ID of protocol vlan table."
::= { protocolVlanEntry 2 }
protocolVlanGroupID OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group ID of protocol vlan table."
::= { protocolVlanEntry 3 }
protocolVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of protocol vlan table."
::= { protocolVlanEntry 99 }
-- ---------------------------------------------------------------------
-- MacNotify Function
-- ---------------------------------------------------------------------
macNotifyState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enabled or disabled MAC Notification."
::= { companyMacNotify 1 }
macNotifyInterval OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the time interval in second for trigger the MAC notify message. "
--DEFVAL { 1 }
::= { companyMacNotify 2 }
macNotifyHistorySize OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the history size of variation MAC in address table. The default value is 1 ."
--DEFVAL { 1 }
::= { companyMacNotify 3 }
-- Mac Notify Port Control Table
macNotifyCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacNotifyCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control Loopback detection features either for
the entire switch or for each interface in the switch."
::= { companyMacNotify 4 }
macNotifyCtrlEntry OBJECT-TYPE
SYNTAX MacNotifyCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { macNotifyCtrlIndex }
::= { macNotifyCtrlTable 1 }
MacNotifyCtrlEntry ::=
SEQUENCE {
macNotifyCtrlIndex
Integer32,
macNotifyPortStatus
INTEGER
}
macNotifyCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number."
::= { macNotifyCtrlEntry 1 }
macNotifyPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to per port enable or disable the loopback detection
function. Default is disabled."
DEFVAL { disabled }
::= { macNotifyCtrlEntry 2 }
macNotifyInfo OBJECT IDENTIFIER ::= { companyMacNotify 5 }
macNotifyInfoDiscription OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (1..1024))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the information for the device MAC address changes. And the detailed information include:
Operation Code + MAC address + Box ID + Port Number + Zero...
Operation Code: 1, 2 and 3
1 means learned a new MAC address
2 means deleted an old MAC address.
3 means station movement.
Box ID: The switch box ID, for standalone device, it always 1.
Port Number: The port number learned or deleted for the box.
Zero: Used to separate each message (Operate Code + MAC address + Box ID + Port Number)."
::= { macNotifyInfo 1 }
-- ------------------------------------------------------------------
-- BPDU Attack Protection Group
-- ------------------------------------------------------------------
sysBPDUAttackStateEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this to enable BPDU attack protection.
The BPDU Attack Protection function and Spanning Tree Protocol
for ports are mutually exclusive. When the STP function is enabled
on a particular port, BPDU Attack Protection cannot be enabled."
DEFVAL { disabled }
::= { companyBPDUAttack 1 }
sysBPDUAttackRecoverTime OBJECT-TYPE
SYNTAX Integer32 (0 | 60..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a port enters under attack state, it can be disabled or blocked
based on the configuration. The state can be recovered manually or
by the auto recovery mechanism. This command is used to configure the
auto-recovery timer. To manually recover the port, the user needs to
disable and re-enable the port."
DEFVAL { 60 }
::= { companyBPDUAttack 2 }
-- BPDUAttack Port Control Table
sysBPDUAttackCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysBPDUAttackCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control BPDU Attack features either for
the entire switch or for each interface in the switch."
::= { companyBPDUAttack 3 }
sysBPDUAttackCtrlEntry OBJECT-TYPE
SYNTAX SysBPDUAttackCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { sysBPDUAttackCtrlIndex }
::= { sysBPDUAttackCtrlTable 1 }
SysBPDUAttackCtrlEntry ::=
SEQUENCE {
sysBPDUAttackCtrlIndex
Integer32,
sysBPDUAttackPortState
INTEGER,
sysBPDUAttackPortMode
INTEGER ,
sysBPDUAttackPortStatus
INTEGER
}
sysBPDUAttackCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number."
::= { sysBPDUAttackCtrlEntry 1 }
sysBPDUAttackPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the BPDU Attack Protection state of a port.
The default state is disable."
DEFVAL { disabled }
::= { sysBPDUAttackCtrlEntry 2 }
sysBPDUAttackPortMode OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
block(2),
shutdown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the BPDU Attack Protection mode of a port."
::= { sysBPDUAttackCtrlEntry 3 }
sysBPDUAttackPortStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
underAttack(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Use this to view per port BPDU attack protection status."
DEFVAL { normal }
::= { sysBPDUAttackCtrlEntry 4 }
sysBPDUAttackLog OBJECT-TYPE
SYNTAX INTEGER {
none(1),
attackDetected(2),
attackCleared(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure log settings for BPDU attack protection events."
DEFVAL { none }
::= { companyBPDUAttack 4 }
-- ---------------------------------------------------------------------
-- VLAN Trunk Function
-- ---------------------------------------------------------------------
vlanTrunkSystem OBJECT IDENTIFIER ::= { companyVLANTrunk 1 }
-- ------------------------------------------------------------------
-- The La System Group
-- ------------------------------------------------------------------
vlanTrunkGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the global state of the VLAN trunking feature of the device."
::= { vlanTrunkSystem 1 }
vlanTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanTrunkConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the VLAN trunking feature of the device."
::= { vlanTrunkSystem 2 }
vlanTrunkEntry OBJECT-TYPE
SYNTAX VlanTrunkConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port."
INDEX { vlanTrunkIfIndex }
::= { vlanTrunkTable 1 }
VlanTrunkConfigEntry ::=
SEQUENCE {
vlanTrunkIfIndex InterfaceIndex,
vlanTrunkState INTEGER
}
vlanTrunkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port. "
::= { vlanTrunkEntry 1 }
vlanTrunkState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the VLAN trunk status as enabled or disabled."
::= { vlanTrunkEntry 2 }
-- ---------------------------------------------------------------------
-- QinQ Function
-- ---------------------------------------------------------------------
qinqSystem OBJECT IDENTIFIER ::= { companyQinQ 1 }
qinqVLANTranslation OBJECT IDENTIFIER ::= { companyQinQ 2 }
-- ------------------------------------------------------------------
-- The QinQ System Group
-- ------------------------------------------------------------------
qinqGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the Q-in-Q status."
::= { qinqSystem 1 }
qinqInnerTPID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the Q-in-Q inner TPID."
::= { qinqSystem 2 }
qinqTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinQConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Q-in-Q information about each port."
::= { qinqSystem 3 }
qinqEntry OBJECT-TYPE
SYNTAX QinQConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Q-in-Q information for each port."
INDEX { qinqIfIndex }
::= { qinqTable 1 }
QinQConfigEntry ::=
SEQUENCE {
qinqIfIndex InterfaceIndex,
qinqRoleState INTEGER,
qinqMissDropState INTEGER,
qinqOuterTPID Unsigned32,
qinqAddInnerTagState INTEGER,
qinqAddInnerTagValue Unsigned32
}
qinqIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port. "
::= { qinqEntry 1 }
qinqRoleState OBJECT-TYPE
SYNTAX INTEGER { nni(1), uni(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the QinQ Role as NNI or UNI."
::= { qinqEntry 2 }
qinqMissDropState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the QinQ Miss Drop state as enabled or disabled."
::= { qinqEntry 3 }
qinqOuterTPID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the QinQ Outer TPID value."
::= { qinqEntry 4 }
qinqAddInnerTagState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the QinQ Add Inner Tag state as enabled or disabled."
::= { qinqEntry 5 }
qinqAddInnerTagValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the QinQ Add Inner Tag value."
::= { qinqEntry 6 }
--
-- Vlan Translation Table
--
qinqVlanTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinQVlanTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains VLAN translation information."
::= { qinqVLANTranslation 1 }
qinqVlanTranslationEntry OBJECT-TYPE
SYNTAX QinQVlanTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of VLAN translation information."
INDEX {qinqVlanTranslationIfIndex, qinqVlanTranslationCVID}
::= { qinqVlanTranslationTable 1 }
QinQVlanTranslationEntry ::=
SEQUENCE {
qinqVlanTranslationIfIndex
InterfaceIndex,
qinqVlanTranslationCVID
Unsigned32,
qinqVlanTranslationSVID
Unsigned32,
qinqVlanTranslationPriority
Integer32,
qinqVlanTranslationSVIDOperation
INTEGER,
qinqVlanTranslationRowStatus
RowStatus
}
qinqVlanTranslationIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index."
::= { qinqVlanTranslationEntry 1 }
qinqVlanTranslationCVID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The customer VLAN identifier in a C-TAG."
::= { qinqVlanTranslationEntry 2 }
qinqVlanTranslationSVID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A VLAN identifier conveyed in an S-TAG."
::= { qinqVlanTranslationEntry 3 }
qinqVlanTranslationPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of TAG."
::= { qinqVlanTranslationEntry 4 }
qinqVlanTranslationSVIDOperation OBJECT-TYPE
SYNTAX INTEGER {
add(1),
replace(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 'add' action indicates to add a tag for the assigned SP-VLAN
before the C-VLAN tag. If there is S-TAG in the packet, this rule
will not take effect.
The 'replace' action indicates to replace the C-VLAN in the tag by
the SP-VLAN. If there is no C-TAG in the packet, this rule will not
take effect."
::= { qinqVlanTranslationEntry 5 }
qinqVlanTranslationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { qinqVlanTranslationEntry 99 }
-- ---------------------------------------------------------------------
-- EOAM Function
-- ---------------------------------------------------------------------
eoamSystem OBJECT IDENTIFIER ::= { companyEoam 1 }
eoamLinkMonitor OBJECT IDENTIFIER ::= { companyEoam 2 }
-- ------------------------------------------------------------------
-- The EOAM System Group
-- ------------------------------------------------------------------
-- eoamGlobalStatus OBJECT-TYPE
-- SYNTAX INTEGER { enabled(1), disabled(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is used to enable/disable the EOAM status."
-- ::= { eoamSystem 1 }
eoamTable OBJECT-TYPE
SYNTAX SEQUENCE OF EOAMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains EOAM mode information about each port."
::= { eoamSystem 2 }
eoamEntry OBJECT-TYPE
SYNTAX EOAMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of EOAM mode information for each port."
INDEX { eoamIfIndex }
::= { eoamTable 1 }
EOAMConfigEntry ::=
SEQUENCE {
eoamIfIndex InterfaceIndex,
eoamState INTEGER,
eoamMode INTEGER,
eoamReceivedRemoteLoopback INTEGER,
eoamRemoteLoopback INTEGER,
eoamDyingGaspEnable INTEGER,
eoamCriticalEventEnable INTEGER
}
eoamIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port. "
::= { eoamEntry 1 }
eoamState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM state enabled or disabled."
::= { eoamEntry 2 }
eoamMode OBJECT-TYPE
SYNTAX INTEGER { passive(1), active(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM mode as active or passive."
::= { eoamEntry 3 }
eoamReceivedRemoteLoopback OBJECT-TYPE
SYNTAX INTEGER { ignore(1), process(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM received or ignore remote loopback packets."
::= { eoamEntry 4 }
eoamRemoteLoopback OBJECT-TYPE
SYNTAX INTEGER { noLoopBack(1),
startLoopBack(2),
remoteLoopBack(3),
stopLoopBack(4),
localLoopBack(5),
unknownLoopBack(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM remote loopback start or stop."
::= { eoamEntry 5 }
eoamDyingGaspEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM dying gasp state enabled or disabled."
::= { eoamEntry 6 }
eoamCriticalEventEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM critical event state enabled or disabled."
::= { eoamEntry 7 }
-- ------------------------------------------------------------------
-- The EOAM Link Monitor Group
-- ------------------------------------------------------------------
eoamLinkMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF EOAMConfigLinkMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains EOAM link monitor information about each port."
::= { eoamLinkMonitor 1 }
eoamLinkMonitorEntry OBJECT-TYPE
SYNTAX EOAMConfigLinkMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of EOAM link monitor information for each port."
INDEX { eoamLinkMonitorIfIndex }
::= { eoamLinkMonitorTable 1 }
EOAMConfigLinkMonitorEntry ::=
SEQUENCE {
eoamLinkMonitorIfIndex InterfaceIndex,
errorSymbolNotifyState INTEGER,
errorSymbolThreshold Unsigned32,
errorSymbolWindow Unsigned32,
errorFrameNotifyState INTEGER,
errorFrameThreshold Unsigned32,
errorFrameWindow Unsigned32,
errorFrameSecondsNotifyState INTEGER,
errorFrameSecondsThreshold Unsigned32,
errorFrameSecondsWindow Unsigned32,
errorFramePeriodNotifyState INTEGER,
errorFramePeriodThreshold Unsigned32,
errorFramePeriodWindow Unsigned32
}
eoamLinkMonitorIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port. "
::= { eoamLinkMonitorEntry 1 }
errorSymbolNotifyState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol notify state enabled or disabled."
::= { eoamLinkMonitorEntry 2 }
errorSymbolThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol threshold."
::= { eoamLinkMonitorEntry 3 }
errorSymbolWindow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol window."
::= { eoamLinkMonitorEntry 4 }
errorFrameNotifyState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error frame notify state enabled or disabled."
::= { eoamLinkMonitorEntry 5 }
errorFrameThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error frame threshold."
::= { eoamLinkMonitorEntry 6 }
errorFrameWindow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol window."
::= { eoamLinkMonitorEntry 7 }
errorFrameSecondsNotifyState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol notify state enabled or disabled."
::= { eoamLinkMonitorEntry 8 }
errorFrameSecondsThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol threshold."
::= { eoamLinkMonitorEntry 9 }
errorFrameSecondsWindow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol window."
::= { eoamLinkMonitorEntry 10 }
errorFramePeriodNotifyState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol notify state enabled or disabled."
::= { eoamLinkMonitorEntry 11 }
errorFramePeriodThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol threshold."
::= { eoamLinkMonitorEntry 12 }
errorFramePeriodWindow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the EOAM error symbol window."
::= { eoamLinkMonitorEntry 13 }
-- ---------------------------------------------------------------------
-- EOAM Function
-- ---------------------------------------------------------------------
duldSystem OBJECT IDENTIFIER ::= { companyDuld 1 }
-- ------------------------------------------------------------------
-- The DULD System Group
-- ------------------------------------------------------------------
duldTable OBJECT-TYPE
SYNTAX SEQUENCE OF DULDConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains DULD mode information about each port."
::= { duldSystem 1 }
duldEntry OBJECT-TYPE
SYNTAX DULDConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of DULD mode information for each port."
INDEX { duldIfIndex }
::= { duldTable 1 }
DULDConfigEntry ::=
SEQUENCE {
duldIfIndex InterfaceIndex,
duldState INTEGER,
duldOperState INTEGER,
duldMode INTEGER,
duldLinkStatus INTEGER,
duldDiscoveryTime Unsigned32
}
duldIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port. "
::= { duldEntry 1 }
duldState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DULD admin state enabled or disabled."
::= { duldEntry 2 }
duldOperState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the DULD Oper state enabled or disabled."
::= { duldEntry 3 }
duldMode OBJECT-TYPE
SYNTAX INTEGER { shutdown(1), normal(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DULD mode as shutdown or normal."
::= { duldEntry 4 }
duldLinkStatus OBJECT-TYPE
SYNTAX INTEGER { unknow(1), bidirectional(2), txFault(3), rxFault(4), linkDown(5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the DULD link status."
::= { duldEntry 5 }
duldDiscoveryTime OBJECT-TYPE
SYNTAX Unsigned32 (5..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DULD discovery time."
::= { duldEntry 6 }
duldRecoverTime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duld auto recover time."
DEFVAL { 60 }
::= { duldSystem 2 }
-- ----------------------------------------------------------
-- The companyDoSCtrl Groups
-- ----------------------------------------------------------
-- Dos prevention Group
-- ----------------------------------------------------------
doSCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF DoSCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that holds the DoS prevention settings of the device."
::= { companyDoSCtrl 1 }
doSCtrlEntry OBJECT-TYPE
SYNTAX DoSCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of DoS prevention settings of the device."
INDEX { doSCtrlType }
::= { doSCtrlTable 1 }
DoSCtrlEntry ::=
SEQUENCE {
doSCtrlType
INTEGER,
doSCtrlState
INTEGER,
doSCtrlActionType
INTEGER
}
doSCtrlType OBJECT-TYPE
SYNTAX INTEGER {
land-attack(1),
blat-attack(2),
tcp-null-scan(4),
tcp-xmascan(5),
tcp-synfin(6),
tcp-syn-srcport-less-1024(7),
ping-death-attack(8),
tcp-tiny-fragment(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DoS prevention type."
::= { doSCtrlEntry 1 }
doSCtrlState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the DoS prevention type."
::= { doSCtrlEntry 2 }
doSCtrlActionType OBJECT-TYPE
SYNTAX INTEGER {
drop(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the action for the DoS prevention type.
If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration
will not take effect until a valid mirror port is specified. If mirror port is not valid
the behavior will be the same as 'drop'"
::= { doSCtrlEntry 3 }
dosCtrlTrapLogState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Dos Trap Log function.
Default is disabled."
DEFVAL { disabled }
::= { companyDoSCtrl 2 }
-- ------------------------------------------------------------------
-- The Time Range Setting
-- ------------------------------------------------------------------
swTimeRangeSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwTimeRangeSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure time Range in the system."
::= { companyTimeRangeMgmt 1 }
swTimeRangeSettingEntry OBJECT-TYPE
SYNTAX SwTimeRangeSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A schedule entry to configure time Range in the system."
INDEX { swTimeRangeIndex }
::= { swTimeRangeSettingTable 1 }
SwTimeRangeSettingEntry ::=
SEQUENCE {
swTimeRangeIndex Integer32,
swTimeRangeName DisplayString,
swTimeRangeDate INTEGER,
swTimeRangeStartYear INTEGER,
swTimeRangeStartMonth INTEGER,
swTimeRangeStartDay Integer32,
swTimeRangeStartHour Integer32,
swTimeRangeStartMinute Integer32,
swTimeRangeEndYear INTEGER,
swTimeRangeEndMonth INTEGER,
swTimeRangeEndDay Integer32,
swTimeRangeEndHour Integer32,
swTimeRangeEndMinute Integer32,
swTimeRangeMonday INTEGER,
swTimeRangeTuesday INTEGER,
swTimeRangeWednesday INTEGER,
swTimeRangeThursday INTEGER,
swTimeRangeFriday INTEGER,
swTimeRangeSaturday INTEGER,
swTimeRangeSunday INTEGER,
swTimeRangeRowStatus RowStatus
}
swTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Time Range identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 52."
::= { swTimeRangeSettingEntry 1 }
swTimeRangeName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Schedule name associated with the Schedule entry (e.g., `abc, bbb')."
::= { swTimeRangeSettingEntry 2}
swTimeRangeDate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable date range checking while executing time base PoE."
::= { swTimeRangeSettingEntry 3}
swTimeRangeStartYear OBJECT-TYPE
SYNTAX INTEGER {
y2009(2009),
y2010(2010),
y2011(2011),
y2012(2012),
y2013(2013),
y2014(2014),
y2015(2015),
y2016(2016),
y2017(2017),
y2018(2018),
y2019(2019),
y2020(2020),
y2021(2021),
y2022(2022),
y2023(2023),
y2024(2024),
y2025(2025),
y2026(2026),
y2027(2027),
y2028(2028),
y2029(2029),
y2030(2030),
y2031(2031),
y2032(2032),
y2033(2033),
y2034(2034),
y2035(2035),
y2036(2036),
y2037(2037)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start year of the Schedule entry."
::= { swTimeRangeSettingEntry 4 }
swTimeRangeStartMonth OBJECT-TYPE
SYNTAX INTEGER {
january(1),
february(2),
march(3),
april(4),
may(5),
june(6),
july(7),
august(8),
september(9),
october(10),
november(11),
december(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start month of the Schedule entry."
::= { swTimeRangeSettingEntry 5 }
swTimeRangeStartDay OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start day of the Schedule entry.
The value must be from 1 to 31."
::= { swTimeRangeSettingEntry 6 }
swTimeRangeStartHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start hour of the Schedule entry.
The value must be from 0 to 23."
::= { swTimeRangeSettingEntry 7 }
swTimeRangeStartMinute OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start minute of the Schedule entry.
The value must be from 0 to 59."
::= { swTimeRangeSettingEntry 8 }
swTimeRangeEndYear OBJECT-TYPE
SYNTAX INTEGER {
y2009(2009),
y2010(2010),
y2011(2011),
y2012(2012),
y2013(2013),
y2014(2014),
y2015(2015),
y2016(2016),
y2017(2017),
y2018(2018),
y2019(2019),
y2020(2020),
y2021(2021),
y2022(2022),
y2023(2023),
y2024(2024),
y2025(2025),
y2026(2026),
y2027(2027),
y2028(2028),
y2029(2029),
y2030(2030),
y2031(2031),
y2032(2032),
y2033(2033),
y2034(2034),
y2035(2035),
y2036(2036),
y2037(2037)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End year of the Schedule entry."
::= { swTimeRangeSettingEntry 9 }
swTimeRangeEndMonth OBJECT-TYPE
SYNTAX INTEGER {
january(1),
february(2),
march(3),
april(4),
may(5),
june(6),
july(7),
august(8),
september(9),
october(10),
november(11),
december(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End month of the Schedule entry."
::= { swTimeRangeSettingEntry 10 }
swTimeRangeEndDay OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End day of the Schedule entry.
The value must be from 1 to 31."
::= { swTimeRangeSettingEntry 11 }
swTimeRangeEndHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End hour of the Schedule entry.
The value must be from 0 to 23."
::= { swTimeRangeSettingEntry 12 }
swTimeRangeEndMinute OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End minute of the Schedule entry.
The value must be from 0 to 59."
::= { swTimeRangeSettingEntry 13 }
swTimeRangeMonday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Monday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 14 }
swTimeRangeTuesday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Tuesday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 15 }
swTimeRangeWednesday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Wednesday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 16 }
swTimeRangeThursday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Thursday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 17 }
swTimeRangeFriday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Friday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 18 }
swTimeRangeSaturday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Saturday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 19 }
swTimeRangeSunday OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling Sunday."
DEFVAL { disable }
::= { swTimeRangeSettingEntry 20 }
swTimeRangeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Time Range Information Table. Only a subset
of the rowstatus variables (active, notinservice, createAndWait, destroy)
are available."
::= { swTimeRangeSettingEntry 21 }
--
-- LLDP Settings
--
dlinklldpState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP in the system."
DEFVAL { disable }
::= { companyLLDPSetting 1 }
dlinklldpMsgHoldMultiplier OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time-to-live value expressed as a multiple of the
lldpMessageTxInterval object.The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,
can be expressed by the following formula: TTL = min(65535,
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier))"
--DEFVAL { 4 }
::= { companyLLDPSetting 2 }
dlinklldpMsgTxInterval OBJECT-TYPE
SYNTAX INTEGER (5..32768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for LLDP packet update frequency.
The timer in units of seconds."
--DEFVAL { 30 }
::= { companyLLDPSetting 3 }
dlinklldpReinitDelay OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for LLDP Reinitialization Delay.
The timer in units of seconds."
--DEFVAL { 2 }
::= { companyLLDPSetting 4 }
dlinklldpTxDelay OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)."
--DEFVAL { 2 }
::= { companyLLDPSetting 5 }
--
-- lldpManAddrConfigTxPortsTable : selection of management addresses
-- to be transmitted on a specified set
-- of ports.
--
dlinklldpConfigManAddrPortsTxEnable OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on the
member ports of the lldpManAddrPortsTxEnable.
The default value for lldpConfigManAddrPortsTxEnable object
is empty binary string, which means no ports are specified
for advertising indicated management address instance."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
::= { companyLLDPSetting 6 }
--
-- D-Link Defined LLDP Port Configuration Table
--
-- textual conventions
LldpPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Each port contained in the chassis (that is known to the
LLDP agent) is uniquely identified by a port number.
A port number has no mandatory relationship to an
InterfaceIndex object (of the interfaces MIB, IETF RFC 2863).
If the LLDP agent is a IEEE 802.1D, IEEE 802.1Q bridge, the
LldpPortNumber will have the same value as the dot1dBasePort
object (defined in IETF RFC 1493) associated corresponding
bridge port. If the system hosting LLDP agent is not an
IEEE 802.1D or an IEEE 802.1Q bridge, the LldpPortNumber
will have the same value as the corresponding interface's
InterfaceIndex object.
Port numbers should be in the range of 1 and 4096 since a
particular port is also represented by the corresponding
port number bit in LldpPortList."
SYNTAX Integer32(1..4096)
-- textual conventions end
lldpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls LLDP frame transmission on individual
ports."
::= { companyLLDPSetting 11 }
lldpPortConfigEntry OBJECT-TYPE
SYNTAX LldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table."
INDEX { lldpPortConfigPortNum }
::= { lldpPortConfigTable 1 }
LldpPortConfigEntry ::= SEQUENCE {
lldpPortConfigPortNum LldpPortNumber,
lldpPortConfigAdminStatus INTEGER,
lldpPortConfigNotificationEnable TruthValue,
lldpPortConfigTLVsTxEnable BITS }
lldpPortConfigPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpPortConfigTable."
::= { lldpPortConfigEntry 1 }
lldpPortConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
txOnly(1),
rxOnly(2),
txAndRx(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired status of the local LLDP agent.
If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it will not store any information
about the remote systems connected.
If the associated lldpPortConfigAdminStatus object has a
value of 'rxOnly(2)', then the LLDP agent will receive,
but it will not transmit LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'txAndRx(3)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's lldpPortConfigAdminStatus
becomes disabled, then the information will naturally age out."
REFERENCE
"IEEE 802.1AB-2005 10.5.1"
DEFVAL { txAndRx }
::= { lldpPortConfigEntry 2 }
lldpPortConfigNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpPortConfigNotificationEnable controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not."
DEFVAL { false }
::= { lldpPortConfigEntry 3 }
lldpPortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
portDesc(0),
sysName(1),
sysDesc(2),
sysCap(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, lldpConfigManAddrTable.
The default value for lldpPortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
-- DEFVAL { { } }
::= { lldpPortConfigEntry 4 }
--
-- D-Link Defined LLDP Extension Dot3 MIB Objects
--
lldpXdot3Objects OBJECT IDENTIFIER ::= { companyLLDPSetting 12 }
-- LLDP IEEE 802.3 extension MIB groups
lldpXdot3Config OBJECT IDENTIFIER ::= { lldpXdot3Objects 1 }
lldpXdot3LocalData OBJECT IDENTIFIER ::= { lldpXdot3Objects 2 }
lldpXdot3RemoteData OBJECT IDENTIFIER ::= { lldpXdot3Objects 3 }
-- textual conventions
LldpPowerPortClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the Power over Ethernet (PoE) port class."
SYNTAX INTEGER {
pClassPSE(1),
pClassPD(2)
}
LldpLinkAggStatusMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the link aggregation status.
The bit 'aggCapable(0)' indicates the link is capable of being
aggregated.
The bit 'aggEnabled(1)' indicates the link is currently in
aggregation."
SYNTAX BITS {
aggCapable(0),
aggEnabled(1)
}
------------------------------------------------------------------------------
-- IEEE 802.3 - Configuration
------------------------------------------------------------------------------
lldpXdot3PortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3PortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP TLVs to be transmitted
on individual ports."
::= { lldpXdot3Config 1 }
lldpXdot3PortConfigEntry OBJECT-TYPE
SYNTAX LldpXdot3PortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpXdot3PortConfigEntry must be from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system."
AUGMENTS { lldpPortConfigEntry }
::= { lldpXdot3PortConfigTable 1 }
LldpXdot3PortConfigEntry ::= SEQUENCE {
lldpXdot3PortConfigTLVsTxEnable BITS
}
lldpXdot3PortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
macPhyConfigStatus(0),
powerViaMDI(1),
linkAggregation(2),
maxFrameSize(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
-- DEFVAL { { } }
::= { lldpXdot3PortConfigEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Local Device Information
------------------------------------------------------------------------------
---
--- lldpXdot3LocPortTable: Ethernet Port AutoNeg/Speed/Duplex
--- Information Table
---
---
lldpXdot3LocPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 1 }
lldpXdot3LocPortEntry OBJECT-TYPE
SYNTAX LldpXdot3LocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot3LocPortAutoNegSupported }
::= { lldpXdot3LocPortTable 1 }
LldpXdot3LocPortEntry ::= SEQUENCE {
lldpXdot3LocPortAutoNegSupported TruthValue,
lldpXdot3LocPortAutoNegEnabled TruthValue,
lldpXdot3LocPortAutoNegAdvertisedCap OCTET STRING,
lldpXdot3LocPortOperMauType Integer32
}
lldpXdot3LocPortAutoNegSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3LocPortEntry 1 }
lldpXdot3LocPortAutoNegEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3LocPortEntry 2 }
lldpXdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.2.2"
::= { lldpXdot3LocPortEntry 3 }
lldpXdot3LocPortOperMauType OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero."
REFERENCE
"IEEE 802.1AB-2005 G.2.3"
::= { lldpXdot3LocPortEntry 4 }
---
---
--- lldpXdot3LocPowerTable: Power Ethernet Information Table
---
---
lldpXdot3LocPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of power ethernet
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 2 }
lldpXdot3LocPowerEntry OBJECT-TYPE
SYNTAX LldpXdot3LocPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot3LocPowerPortClass }
::= { lldpXdot3LocPowerTable 1 }
LldpXdot3LocPowerEntry ::= SEQUENCE {
lldpXdot3LocPowerPortClass LldpPowerPortClass,
lldpXdot3LocPowerMDISupported TruthValue,
lldpXdot3LocPowerMDIEnabled TruthValue,
lldpXdot3LocPowerPairControlable TruthValue,
lldpXdot3LocPowerPairs Integer32,
lldpXdot3LocPowerClass Integer32
}
lldpXdot3LocPowerPortClass OBJECT-TYPE
SYNTAX LldpPowerPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that identifies the port Class of the given port
associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 1 }
lldpXdot3LocPowerMDISupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 2 }
lldpXdot3LocPowerMDIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to identify whether MDI power is
enabled on the given port associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 3 }
lldpXdot3LocPowerPairControlable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 4 }
lldpXdot3LocPowerPairs OBJECT-TYPE
SYNTAX Integer32(1|2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.2"
::= { lldpXdot3LocPowerEntry 5 }
lldpXdot3LocPowerClass OBJECT-TYPE
SYNTAX Integer32(1|2|3|4|5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.3"
::= { lldpXdot3LocPowerEntry 6 }
---
---
--- lldpXdot3LocLinkAggTable: Link Aggregation Information Table
---
---
lldpXdot3LocLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of link aggregation
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 3 }
lldpXdot3LocLinkAggEntry OBJECT-TYPE
SYNTAX LldpXdot3LocLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Link Aggregation information about a particular port
component."
INDEX { lldpXdot3LocLinkAggStatus }
::= { lldpXdot3LocLinkAggTable 1 }
LldpXdot3LocLinkAggEntry ::= SEQUENCE {
lldpXdot3LocLinkAggStatus LldpLinkAggStatusMap,
lldpXdot3LocLinkAggPortId Integer32
}
lldpXdot3LocLinkAggStatus OBJECT-TYPE
SYNTAX LldpLinkAggStatusMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link."
REFERENCE
"IEEE 802.1AB-2005 G.4.1"
::= { lldpXdot3LocLinkAggEntry 1 }
lldpXdot3LocLinkAggPortId OBJECT-TYPE
SYNTAX Integer32(0|1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero."
REFERENCE
"IEEE 802.1AB-2005 G.4.2"
::= { lldpXdot3LocLinkAggEntry 2 }
---
---
--- lldpXdot3LocMaxFrameSizeTable: Maximum Frame Size information
---
---
lldpXdot3LocMaxFrameSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 4 }
lldpXdot3LocMaxFrameSizeEntry OBJECT-TYPE
SYNTAX LldpXdot3LocMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maximum Frame Size information about a particular port
component."
INDEX { lldpXdot3LocMaxFrameSize }
::= { lldpXdot3LocMaxFrameSizeTable 1 }
LldpXdot3LocMaxFrameSizeEntry ::= SEQUENCE {
lldpXdot3LocMaxFrameSize Integer32
}
lldpXdot3LocMaxFrameSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value indicating the maximum supported frame
size in octets on the given port of the local system."
REFERENCE
"IEEE 802.1AB-2005 G.5.1"
::= { lldpXdot3LocMaxFrameSizeEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Remote Devices Information
------------------------------------------------------------------------------
---
---
--- lldpXdot3RemPortTable: Ethernet Information Table
---
---
lldpXdot3RemPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system."
::= { lldpXdot3RemoteData 1 }
lldpXdot3RemPortEntry OBJECT-TYPE
SYNTAX LldpXdot3RemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection."
INDEX { lldpXdot3RemPortAutoNegSupported }
::= { lldpXdot3RemPortTable 1 }
LldpXdot3RemPortEntry ::= SEQUENCE {
lldpXdot3RemPortAutoNegSupported TruthValue,
lldpXdot3RemPortAutoNegEnabled TruthValue,
lldpXdot3RemPortAutoNegAdvertisedCap OCTET STRING,
lldpXdot3RemPortOperMauType Integer32
}
lldpXdot3RemPortAutoNegSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3RemPortEntry 1 }
lldpXdot3RemPortAutoNegEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3RemPortEntry 2 }
lldpXdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.2.2"
::= { lldpXdot3RemPortEntry 3 }
lldpXdot3RemPortOperMauType OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero."
REFERENCE
"IEEE 802.1AB-2005 G.2.3"
::= { lldpXdot3RemPortEntry 4 }
---
---
--- lldpXdot3RemPowerTable: Power Ethernet Information Table
---
---
lldpXdot3RemPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system."
::= { lldpXdot3RemoteData 2 }
lldpXdot3RemPowerEntry OBJECT-TYPE
SYNTAX LldpXdot3RemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection."
INDEX { lldpXdot3RemPowerPortClass}
::= { lldpXdot3RemPowerTable 1 }
LldpXdot3RemPowerEntry ::= SEQUENCE {
lldpXdot3RemPowerPortClass LldpPowerPortClass,
lldpXdot3RemPowerMDISupported TruthValue,
lldpXdot3RemPowerMDIEnabled TruthValue,
lldpXdot3RemPowerPairControlable TruthValue,
lldpXdot3RemPowerPairs Integer32,
lldpXdot3RemPowerClass Integer32
}
lldpXdot3RemPowerPortClass OBJECT-TYPE
SYNTAX LldpPowerPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that identifies the port Class of the given port
associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 1 }
lldpXdot3RemPowerMDISupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 2 }
lldpXdot3RemPowerMDIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 3 }
lldpXdot3RemPowerPairControlable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 4 }
lldpXdot3RemPowerPairs OBJECT-TYPE
SYNTAX Integer32(1|2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.2"
::= { lldpXdot3RemPowerEntry 5 }
lldpXdot3RemPowerClass OBJECT-TYPE
SYNTAX Integer32(1|2|3|4|5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.3"
::= { lldpXdot3RemPowerEntry 6 }
---
---
--- lldpXdot3RemLinkAggTable: Link Aggregation Information Table
---
---
lldpXdot3RemLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system."
::= { lldpXdot3RemoteData 3 }
lldpXdot3RemLinkAggEntry OBJECT-TYPE
SYNTAX LldpXdot3RemLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Link Aggregation information about remote system's port
component."
INDEX { lldpXdot3RemLinkAggStatus }
::= { lldpXdot3RemLinkAggTable 1 }
LldpXdot3RemLinkAggEntry ::= SEQUENCE {
lldpXdot3RemLinkAggStatus LldpLinkAggStatusMap,
lldpXdot3RemLinkAggPortId Integer32
}
lldpXdot3RemLinkAggStatus OBJECT-TYPE
SYNTAX LldpLinkAggStatusMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link."
REFERENCE
"IEEE 802.1AB-2005 G.4.1"
::= { lldpXdot3RemLinkAggEntry 1 }
lldpXdot3RemLinkAggPortId OBJECT-TYPE
SYNTAX Integer32(0|1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero."
REFERENCE
"IEEE 802.1AB-2005 G.4.2"
::= { lldpXdot3RemLinkAggEntry 2 }
---
---
--- lldpXdot3RemMaxFrameSizeTable: Maximum Frame Size information
---
---
lldpXdot3RemMaxFrameSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system."
::= { lldpXdot3RemoteData 4 }
lldpXdot3RemMaxFrameSizeEntry OBJECT-TYPE
SYNTAX LldpXdot3RemMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maximum Frame Size information about a particular port
component."
INDEX { lldpXdot3RemMaxFrameSize }
::= { lldpXdot3RemMaxFrameSizeTable 1 }
LldpXdot3RemMaxFrameSizeEntry ::= SEQUENCE {
lldpXdot3RemMaxFrameSize Integer32
}
lldpXdot3RemMaxFrameSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.5.1"
::= { lldpXdot3RemMaxFrameSizeEntry 1 }
--
-- D-Link Defined LLDP Extension Dot1 MIB Objects
--
lldpXdot1Objects OBJECT IDENTIFIER ::= { companyLLDPSetting 13 }
-- LLDP IEEE 802.1 extension MIB groups
lldpXdot1Config OBJECT IDENTIFIER ::= { lldpXdot1Objects 1 }
lldpXdot1LocalData OBJECT IDENTIFIER ::= { lldpXdot1Objects 2 }
lldpXdot1RemoteData OBJECT IDENTIFIER ::= { lldpXdot1Objects 3 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Configuration
------------------------------------------------------------------------------
--
-- lldpXdot1ConfigPortVlanTable : configure the transmission of the
-- Port VLAN-ID TLVs on set of ports.
--
lldpXdot1ConfigPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports."
::= { lldpXdot1Config 1 }
lldpXdot1ConfigPortVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system."
AUGMENTS { lldpPortConfigEntry }
::= { lldpXdot1ConfigPortVlanTable 1 }
LldpXdot1ConfigPortVlanEntry ::= SEQUENCE {
lldpXdot1ConfigPortVlanTxEnable TruthValue
}
lldpXdot1ConfigPortVlanTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigPortVlanEntry 1 }
--
-- lldpXdot1LocVlanNameTable : VLAN name information about the local system
--
lldpXdot1LocVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent."
::= { lldpXdot1LocalData 3 }
lldpXdot1LocVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1LocVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port."
INDEX { lldpXdot1LocVlanId }
::= { lldpXdot1LocVlanNameTable 1 }
LldpXdot1LocVlanNameEntry ::= SEQUENCE {
lldpXdot1LocVlanId VlanId,
lldpXdot1LocVlanName SnmpAdminString
}
lldpXdot1LocVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible."
REFERENCE
"IEEE 802.1AB-2005 F.4.2"
::= { lldpXdot1LocVlanNameEntry 1 }
lldpXdot1LocVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.
This object should contain the value of the dot1QVLANStaticName
object (defined in IETF RFC 2674) identified with the given
lldpXdot1LocVlanId."
REFERENCE
"IEEE 802.1AB-2005 F.4.4"
::= { lldpXdot1LocVlanNameEntry 2 }
--
-- lldpXdot1ConfigVlanNameTable : configure the transmission of the
-- VLAN name instances on set of ports.
--
lldpXdot1ConfigVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports."
::= { lldpXdot1Config 2 }
lldpXdot1ConfigVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.
This configuration object augments the lldpLocVlanEntry,
therefore it is only present along with the VLAN Name instance
contained in the associated lldpLocVlanNameEntry entry.
Each active lldpXdot1ConfigVlanNameEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocVlanNameEntry) after a re-initialization of the
management system."
AUGMENTS { lldpXdot1LocVlanNameEntry }
::= { lldpXdot1ConfigVlanNameTable 1 }
LldpXdot1ConfigVlanNameEntry ::= SEQUENCE {
lldpXdot1ConfigVlanNameTxEnable TruthValue
}
lldpXdot1ConfigVlanNameTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System VLAN name instance will be transmitted on the
port defined by the given lldpXdot1LocVlanNameEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigVlanNameEntry 1 }
--
-- lldpXdot1LocProtoVlanTable: Port and Protocol VLAN information
--
lldpXdot1LocProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per Port and Protocol
VLAN information about the local system."
::= { lldpXdot1LocalData 2 }
lldpXdot1LocProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1LocProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol VLANs,
identified by a particular lldpXdot1LocProtoVlanId, configured
on the given port."
INDEX { lldpXdot1LocProtoVlanId }
::= { lldpXdot1LocProtoVlanTable 1 }
LldpXdot1LocProtoVlanEntry ::= SEQUENCE {
lldpXdot1LocProtoVlanId Integer32,
lldpXdot1LocProtoVlanSupported TruthValue,
lldpXdot1LocProtoVlanEnabled TruthValue
}
lldpXdot1LocProtoVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPVID) or does
not support port and protocol VLAN operation."
REFERENCE
"IEEE 802.1AB-2005 F.3.2"
::= { lldpXdot1LocProtoVlanEntry 1 }
lldpXdot1LocProtoVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1LocProtoVlanEntry 2 }
lldpXdot1LocProtoVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1LocProtoVlanEntry 3 }
--
-- lldpXdot1ConfigProtoVlanTable : configure the transmission of the
-- protocol VLAN instances on set
-- of ports.
--
lldpXdot1ConfigProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP Port and Protocol
VLAN ID TLV instances to be transmitted on individual ports."
::= { lldpXdot1Config 3 }
lldpXdot1ConfigProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance will be transmitted.
This configuration object augments the lldpXdot1LocVlanEntry,
therefore it is only present along with the Port and
Protocol VLAN ID instance contained in the associated
lldpXdot1LocVlanEntry entry.
Each active lldpXdot1ConfigProtoVlanEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtoVlanEntry) after a re-initialization of
the management system."
AUGMENTS { lldpXdot1LocProtoVlanEntry }
::= { lldpXdot1ConfigProtoVlanTable 1 }
LldpXdot1ConfigProtoVlanEntry ::= SEQUENCE {
lldpXdot1ConfigProtoVlanTxEnable TruthValue
}
lldpXdot1ConfigProtoVlanTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance will
be transmitted on the port defined by the given
lldpXdot1LocProtoVlanEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigProtoVlanEntry 1 }
--
-- lldpXdot1LocProtocolTable : Protocol Identity information
--
lldpXdot1LocProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per protocol identity
information on the local system known to this agent."
REFERENCE
"IEEE 802.1AB-2005 F.5"
::= { lldpXdot1LocalData 4 }
lldpXdot1LocProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1LocProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about particular protocols that are accessible
through the given port component.
There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum."
REFERENCE
"IEEE 802.1AB-2005 F.5"
INDEX { lldpXdot1LocProtocolIndex }
::= { lldpXdot1LocProtocolTable 1 }
LldpXdot1LocProtocolEntry ::= SEQUENCE {
lldpXdot1LocProtocolIndex Integer32,
lldpXdot1LocProtocolId OCTET STRING
}
lldpXdot1LocProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1LocProtocolEntry 1 }
lldpXdot1LocProtocolId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The octet string value used to identify the protocols
associated with the given port of the local system."
REFERENCE
"IEEE 802.1AB-2005 F.5.3"
::= { lldpXdot1LocProtocolEntry 2 }
--
-- lldpXdot1ConfigProtocolTable : configure the transmission of the
-- protocol instances on set
-- of ports.
--
lldpXdot1ConfigProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports."
::= { lldpXdot1Config 4 }
lldpXdot1ConfigProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.
This configuration object augments the lldpXdot1LocProtoEntry,
therefore it is only present along with the Protocol instance
contained in the associated lldpXdot1LocProtoEntry entry.
Each active lldpXdot1ConfigProtocolEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtocolEntry) after a re-initialization of the
management system."
AUGMENTS { lldpXdot1LocProtocolEntry }
::= { lldpXdot1ConfigProtocolTable 1 }
LldpXdot1ConfigProtocolEntry ::= SEQUENCE {
lldpXdot1ConfigProtocolTxEnable TruthValue
}
lldpXdot1ConfigProtocolTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigProtocolEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Local System Information
------------------------------------------------------------------------------
lldpXdot1LocTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent."
::= { lldpXdot1LocalData 1 }
lldpXdot1LocEntry OBJECT-TYPE
SYNTAX LldpXdot1LocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about IEEE 802.1 organizationally defined
LLDP extension."
INDEX { lldpXdot1LocPortVlanId }
::= { lldpXdot1LocTable 1 }
LldpXdot1LocEntry ::= SEQUENCE {
lldpXdot1LocPortVlanId Integer32
}
lldpXdot1LocPortVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation."
REFERENCE
"IEEE 802.1AB-2005 F.2.1"
::= { lldpXdot1LocEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Remote System Information
------------------------------------------------------------------------------
lldpXdot1RemTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port."
::= { lldpXdot1RemoteData 1 }
lldpXdot1RemEntry OBJECT-TYPE
SYNTAX LldpXdot1RemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot1RemPortVlanId }
::= { lldpXdot1RemTable 1 }
LldpXdot1RemEntry ::= SEQUENCE {
lldpXdot1RemPortVlanId Integer32
}
lldpXdot1RemPortVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of lldpXdot1RemPortVlanId should
be zero."
REFERENCE
"IEEE 802.1AB-2005 F.2.1"
::= { lldpXdot1RemEntry 1 }
lldpXdot1RemProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port."
::= { lldpXdot1RemoteData 2 }
lldpXdot1RemProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1RemProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system."
INDEX { lldpXdot1RemProtoVlanId }
::= { lldpXdot1RemProtoVlanTable 1 }
LldpXdot1RemProtoVlanEntry ::= SEQUENCE {
lldpXdot1RemProtoVlanId Integer32,
lldpXdot1RemProtoVlanSupported TruthValue,
lldpXdot1RemProtoVlanEnabled TruthValue
}
lldpXdot1RemProtoVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
lldpXdot1RemProtoVlanId should be zero."
REFERENCE
"IEEE 802.1AB-2005 F.3.2"
::= { lldpXdot1RemProtoVlanEntry 1 }
lldpXdot1RemProtoVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1RemProtoVlanEntry 2 }
lldpXdot1RemProtoVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1RemProtoVlanEntry 3 }
--
-- lldpXdot1RemVlanNameTable : VLAN name information of the remote
-- systems
--
lldpXdot1RemVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port."
REFERENCE
"IEEE 802.1AB-2005 F.4"
::= { lldpXdot1RemoteData 3 }
lldpXdot1RemVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1RemVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port."
INDEX { lldpXdot1RemVlanId }
::= { lldpXdot1RemVlanNameTable 1 }
LldpXdot1RemVlanNameEntry ::= SEQUENCE {
lldpXdot1RemVlanId VlanId,
lldpXdot1RemVlanName SnmpAdminString
}
lldpXdot1RemVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible."
REFERENCE
"IEEE 802.1AB-2005 F.4.2"
::= { lldpXdot1RemVlanNameEntry 1 }
lldpXdot1RemVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify VLAN name identified by the
VLAN Id associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 F.4.4"
::= { lldpXdot1RemVlanNameEntry 2 }
--
-- lldpXdot1RemProtocolTable : Protocol information of the remote systems
--
lldpXdot1RemProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per protocol information
about the remote system, received on the given port."
::= { lldpXdot1RemoteData 4 }
lldpXdot1RemProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1RemProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port."
INDEX { lldpXdot1RemProtocolIndex }
::= { lldpXdot1RemProtocolTable 1 }
LldpXdot1RemProtocolEntry ::= SEQUENCE {
lldpXdot1RemProtocolIndex Integer32,
lldpXdot1RemProtocolId OCTET STRING
}
lldpXdot1RemProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1RemProtocolEntry 1 }
lldpXdot1RemProtocolId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The octet string value used to identify the protocols
associated with the given port of remote system."
REFERENCE
"IEEE 802.1AB-2005 F.5.3"
::= { lldpXdot1RemProtocolEntry 2 }
-- ---------------------------------------------------------------------
-- Green Function
-- ---------------------------------------------------------------------
dlinkGreenLEDShutoff OBJECT IDENTIFIER ::= { companyGreenSetting 1 }
dlinkGreenPortShutoff OBJECT IDENTIFIER ::= { companyGreenSetting 2 }
dlinkGreenSystemHibernation OBJECT IDENTIFIER ::= { companyGreenSetting 4 }
-- ---------------------------------------------------------------------
-- Green Disable LED
-- ---------------------------------------------------------------------
dlinkGreenLEDShutoffPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to disable LED port."
::= { dlinkGreenLEDShutoff 1 }
dlinkGreenLEDShutoffState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Green disable LED function.
Default is disabled."
DEFVAL { disabled }
::= { dlinkGreenLEDShutoff 2 }
dlinkGreenLEDShutoffTimeProfile1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { dlinkGreenLEDShutoff 3}
dlinkGreenLEDShutoffTimeProfile2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { dlinkGreenLEDShutoff 4}
-- ---------------------------------------------------------------------
-- Green Disable Port
-- ---------------------------------------------------------------------
dlinkGreenPortShutoffPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to disable LED port."
::= { dlinkGreenPortShutoff 1 }
dlinkGreenPortShutoffState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Green disable LED function.
Default is disabled."
DEFVAL { disabled }
::= { dlinkGreenPortShutoff 2 }
dlinkGreenPortShutoffTimeProfile1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { dlinkGreenPortShutoff 3}
dlinkGreenPortShutoffTimeProfile2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { dlinkGreenPortShutoff 4}
-- ---------------------------------------------------------------------
-- Green System Hibernation mode
-- ---------------------------------------------------------------------
dlinkGreenSystemHibernationState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Green disable LED function.
Default is disabled."
DEFVAL { disabled }
::= { dlinkGreenSystemHibernation 1 }
dlinkGreenSystemHibernationTimeProfile1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { dlinkGreenSystemHibernation 2}
dlinkGreenSystemHibernationTimeProfile2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { dlinkGreenSystemHibernation 3}
dlinkPowerSavLinkStatusDetectState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Power Saving Link Status Detection.
Default is disabled."
DEFVAL { disabled }
::= { companyGreenSetting 6 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityDhcpServerScreen OBJECT IDENTIFIER ::= { companySecurity 7 }
-- dhcp Server Screen Group --------------------------------------------- --
dhcpServerScreenEnablePortlist OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable DHCP Server Screening port list."
::= { securityDhcpServerScreen 1 }
dhcpServerScreenEnableVlanlist OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable DHCP Server Screening vlan list."
::= { securityDhcpServerScreen 2 }
dhcpServerScreenLogSuppressDuration OBJECT-TYPE
SYNTAX INTEGER {
one-min (1),
five-min (5),
thirty-min (30)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DSS Trap Log Suppress Duration."
::= { securityDhcpServerScreen 3 }
-- filterDHCPServer Table
filterDHCPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterDHCPServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control filter DHCP Server for the entire
switch or for each interface in the switch."
::= { securityDhcpServerScreen 4 }
filterDHCPServerEntry OBJECT-TYPE
SYNTAX FilterDHCPServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { filterDHCPServerIpAddr, filterDHCPServerClientMacAddr }
::= { filterDHCPServerTable 1 }
FilterDHCPServerEntry ::=
SEQUENCE {
filterDHCPServerIpAddr
IpAddress,
filterDHCPServerClientMacAddr
MacAddress,
filterDHCPServerPortList
PortList,
filterDHCPServerVlanList
OCTET STRING,
filterDHCPServerRowStatus
RowStatus
}
filterDHCPServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { filterDHCPServerEntry 1 }
filterDHCPServerClientMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Mac Address."
DEFVAL { '000102030405'h }
::= { filterDHCPServerEntry 2 }
filterDHCPServerPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { filterDHCPServerEntry 3 }
filterDHCPServerVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { filterDHCPServerEntry 4 }
filterDHCPServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { filterDHCPServerEntry 99 }
securityTrafficSeg OBJECT IDENTIFIER ::= { companySecurity 9}
--
-- Port Map Table
--
trafficSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { securityTrafficSeg 1 }
trafficSegEntry OBJECT-TYPE
SYNTAX TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port"
INDEX { trafficSegIfIndex }
::= { trafficSegTable 1 }
TrafficSegEntry ::=
SEQUENCE {
trafficSegIfIndex InterfaceIndex,
trafficSegMemberList PortList
}
trafficSegIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's
interface index). "
::= { trafficSegEntry 1 }
trafficSegMemberList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port list of port channel."
::= { trafficSegEntry 2 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityAAC OBJECT IDENTIFIER ::= { companySecurity 11 }
-- -------------------------------------------------------------
-- Authentication Policy and Parameter Settings
-- -------------------------------------------------------------
aacAuthenAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Access Authentication is enable or
disable."
::= { securityAAC 1}
aacAuthParamResponseTimeout OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout in second for login authentication response."
::= { securityAAC 2 }
aacAuthParamAttempt OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount for login authentication, if login failure exceed,
connection or access would be locked."
::= { securityAAC 3 }
-- -------------------------------------------------------------
-- Application Authentication Settings
-- -------------------------------------------------------------
aacAPAuthMethodGroup OBJECT IDENTIFIER ::= { securityAAC 4 }
aacAPLoginMethod OBJECT IDENTIFIER ::= { aacAPAuthMethodGroup 1 }
aacAPEnableMethod OBJECT IDENTIFIER ::= { aacAPAuthMethodGroup 2 }
aacAPConsoleLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via local
console"
::= { aacAPLoginMethod 1 }
aacAPTelnetLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via telnet."
::= { aacAPLoginMethod 2 }
aacAPSSHLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via SSH."
::= { aacAPLoginMethod 3 }
aacAPHttpLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via HTTP."
::= { aacAPLoginMethod 4 }
aacAPConsoleEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via local
console."
::= { aacAPEnableMethod 1 }
aacAPTelnetEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via telnet."
::= { aacAPEnableMethod 2 }
aacAPSSHEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via SSH."
::= { aacAPEnableMethod 3 }
aacAPHttpEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via HTTP."
::= { aacAPEnableMethod 4 }
-- -------------------------------------------------------------
-- Authentication Server Group setting
-- -------------------------------------------------------------
aacServerGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacServerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains informations about server group."
::= { securityAAC 5 }
aacServerGroupEntry OBJECT-TYPE
SYNTAX AacServerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the group including servers."
INDEX { aacServerGroupIndex }
::= { aacServerGroupTable 1 }
AacServerGroupEntry ::=
SEQUENCE {
aacServerGroupIndex
INTEGER,
aacServerGroupName
OCTET STRING,
aacServersInGroup
BITS,
aacServerGroupRowStatus
RowStatus
}
aacServerGroupIndex OBJECT-TYPE
SYNTAX INTEGER (2..9)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies this SwAACServerGroupEntry ."
::= { aacServerGroupEntry 1 }
aacServerGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method group.
The name is writable only if Group is new created,
which the value of aacServerGroupRowStatus is 'notReady'."
::= { aacServerGroupEntry 2 }
aacServersInGroup OBJECT-TYPE
SYNTAX BITS {
id1(0),
id2(1),
id3(2),
id4(3),
id5(4),
id6(5),
id7(6),
id8(7),
id9(8),
id10(9),
id11(10),
id12(11),
id13(12),
id14(13),
id15(14),
id16(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of servers in the group, each bit indicates a specified server ID.
The server must be created before including it."
::= { aacServerGroupEntry 3 }
aacServerGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacServerGroupEntry 4 }
-- -------------------------------------------------------------
-- IPv4
-- Authentication Server host setting
-- -------------------------------------------------------------
iPv4aacServerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPv4AacServerInfoEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table that contains information about severs."
::= { securityAAC 6 }
iPv4aacServerInfoEntry OBJECT-TYPE
SYNTAX IPv4AacServerInfoEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of the information of server ."
INDEX { iPv4aacServerIndex }
::= { iPv4aacServerInfoTable 1 }
IPv4AacServerInfoEntry ::=
SEQUENCE {
iPv4aacServerIndex
INTEGER,
iPv4aacServerIPAddr
IpAddress,
iPv4aacServerAuthProtocol
INTEGER,
iPv4aacServerAuthPort
INTEGER,
iPv4aacServerAuthKey
OCTET STRING,
iPv4aacServerTimeout
INTEGER,
iPv4aacServerRetryCount
INTEGER,
iPv4aacServerRowStatus
RowStatus
}
iPv4aacServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"A value that uniquely identifies this SwAACServerGroupEntry."
::= { iPv4aacServerInfoEntry 1 }
iPv4aacServerIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The IP address of Server"
::= { iPv4aacServerInfoEntry 2 }
iPv4aacServerAuthProtocol OBJECT-TYPE
SYNTAX INTEGER{
tacacsPlus(1),
radius(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The authentication protocol provided by the Server."
::= { iPv4aacServerInfoEntry 3 }
iPv4aacServerAuthPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The TCP/IP port ."
::= { iPv4aacServerInfoEntry 4 }
iPv4aacServerAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..254))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The key used while authentication process."
::= { iPv4aacServerInfoEntry 5 }
iPv4aacServerTimeout OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Server response timeout ."
::= { iPv4aacServerInfoEntry 6 }
iPv4aacServerRetryCount OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Client retry count .
(-1: No retry mechanism)"
::= { iPv4aacServerInfoEntry 7 }
iPv4aacServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { iPv4aacServerInfoEntry 8 }
-- -------------------------------------------------------------
-- IPv6
-- Authentication Server host setting
-- -------------------------------------------------------------
aacServerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacServerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about severs."
::= { securityAAC 7 }
aacServerInfoEntry OBJECT-TYPE
SYNTAX AacServerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the information of server ."
INDEX { aacServerIndex }
::= { aacServerInfoTable 1 }
AacServerInfoEntry ::=
SEQUENCE {
aacServerIndex
INTEGER,
aacServerIPType
INTEGER,
aacServerIPAddr
Ipv6Address,
aacServerInterfaceName
OCTET STRING,
aacServerAuthProtocol
INTEGER,
aacServerAuthPort
INTEGER,
aacServerAuthKey
OCTET STRING,
aacServerTimeout
INTEGER,
aacServerRetryCount
INTEGER,
aacServerAccountingPort
INTEGER,
aacServerRowStatus
RowStatus
}
aacServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies this SwAACServerGroupEntry."
::= { aacServerInfoEntry 1 }
aacServerIPType OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the AAC server IP type
referred to in this table entry. (IPv4=1, IPv6=2)"
DEFVAL { 1 }
::= { aacServerInfoEntry 2 }
aacServerIPAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of Server"
::= { aacServerInfoEntry 3 }
aacServerInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the interface name when the aacServerIPAddr is linklocal address."
::= { aacServerInfoEntry 4 }
aacServerAuthProtocol OBJECT-TYPE
SYNTAX INTEGER{
tacacsPlus(1),
radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication protocol provided by the Server."
::= { aacServerInfoEntry 5 }
aacServerAuthPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP/IP port ."
::= { aacServerInfoEntry 6 }
aacServerAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..254))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The key used while authentication process."
::= { aacServerInfoEntry 7 }
aacServerTimeout OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server response timeout ."
::= { aacServerInfoEntry 8 }
aacServerRetryCount OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Client retry count .
(-1: No retry mechanism)"
::= { aacServerInfoEntry 9 }
aacServerAccountingPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The accounting port ."
::= { aacServerInfoEntry 10 }
aacServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacServerInfoEntry 99 }
-- -------------------------------------------------------------
-- Login Method list table
-- -------------------------------------------------------------
aacLoginMethodListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacLoginMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about Login authentication method
lists."
::= { securityAAC 8 }
aacLoginMethodListEntry OBJECT-TYPE
SYNTAX AacLoginMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Authentication methods."
INDEX { aacLoginMethodListIndex }
::= { aacLoginMethodListTable 1 }
AacLoginMethodListEntry ::=
SEQUENCE {
aacLoginMethodListIndex
INTEGER,
aacLoginMethodListName
OCTET STRING,
aacLoginMethod1
INTEGER,
aacLoginMethod2
INTEGER,
aacLoginMethod3
INTEGER,
aacLoginMethod4
INTEGER,
aacLoginMethodListRowStatus
RowStatus
}
aacLoginMethodListIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies this method list."
::= { aacLoginMethodListEntry 1 }
aacLoginMethodListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method list."
::= { aacLoginMethodListEntry 2 }
aacLoginMethod1 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 3 }
aacLoginMethod2 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 4 }
aacLoginMethod3 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 5 }
aacLoginMethod4 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 6 }
aacLoginMethodListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacLoginMethodListEntry 7 }
-- -------------------------------------------------------------
-- Enable Method table
-- -------------------------------------------------------------
aacEnableMethodListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacEnableMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about Enable authentication method
lists."
::= { securityAAC 9 }
aacEnableMethodListEntry OBJECT-TYPE
SYNTAX AacEnableMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Authentication methods."
INDEX { aacEnableMethodListIndex }
::= { aacEnableMethodListTable 1 }
AacEnableMethodListEntry ::=
SEQUENCE {
aacEnableMethodListIndex
INTEGER,
aacEnableMethodListName
OCTET STRING,
aacEnableMethod1
INTEGER,
aacEnableMethod2
INTEGER,
aacEnableMethod3
INTEGER,
aacEnableMethod4
INTEGER,
aacEnableMethodListRowStatus
RowStatus
}
aacEnableMethodListIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies this method list."
::= { aacEnableMethodListEntry 1 }
aacEnableMethodListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method list."
::= { aacEnableMethodListEntry 2 }
aacEnableMethod1 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 3 }
aacEnableMethod2 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 4 }
aacEnableMethod3 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 5 }
aacEnableMethod4 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 6 }
aacEnableMethodListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacEnableMethodListEntry 7 }
-- -------------------------------------------------------------
-- Local Enable Password
-- -------------------------------------------------------------
aacLocalEnablePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set Local Enable Password."
::= { securityAAC 10 }
-- -------------------------------------------------------------
-- Accounting Method list table
-- -------------------------------------------------------------
aacAccountingMethodListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacAccountingMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about Accounting authentication method
lists."
::= { securityAAC 11 }
aacAccountingMethodListEntry OBJECT-TYPE
SYNTAX AacAccountingMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Authentication methods."
INDEX { aacAccountingMethodListIndex }
::= { aacAccountingMethodListTable 1 }
AacAccountingMethodListEntry ::=
SEQUENCE {
aacAccountingMethodListIndex
INTEGER,
aacAccountingMethodListName
OCTET STRING,
aacAccountingMethod1
INTEGER,
aacAccountingMethod2
INTEGER,
aacAccountingMethod3
INTEGER,
aacAccountingMethod4
INTEGER,
aacAccountingMethodListRowStatus
RowStatus
}
aacAccountingMethodListIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies this method list."
::= { aacAccountingMethodListEntry 1 }
aacAccountingMethodListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method list."
::= { aacAccountingMethodListEntry 2 }
aacAccountingMethod1 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacAccountingMethodListEntry 3 }
aacAccountingMethod2 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacAccountingMethodListEntry 4 }
aacAccountingMethod3 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacAccountingMethodListEntry 5 }
aacAccountingMethod4 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacsPlus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacAccountingMethodListEntry 6 }
aacAccountingMethodListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacAccountingMethodListEntry 7 }
-- -------------------------------------------------------------
-- Accounting Service Index
-- -------------------------------------------------------------
aacAccountingServiceIndex OBJECT IDENTIFIER ::= { securityAAC 12 }
aacAccountingServiceNetwork OBJECT-TYPE
SYNTAX INTEGER {
radius-only (0),
default-method-list (1),
method-list-name (2),
disabled (-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates aac Accounting Service Network is radius_only, default_method_list,
method_list_name and disable about Accounting Service Network."
DEFVAL { -1 }
::= { aacAccountingServiceIndex 1 }
aacAccountingServiceShell OBJECT-TYPE
SYNTAX INTEGER {
radius-only (0),
default-method-list (1),
method-list-name (2),
disabled (-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates aac Accounting Service Shell is radius_only, default_method_list,
method_list_name and disable about Accounting Service Network."
DEFVAL { -1 }
::= { aacAccountingServiceIndex 2 }
aacAccountingServiceSystem OBJECT-TYPE
SYNTAX INTEGER {
radius-only (0),
default-method-list (1),
method-list-name (2),
disabled (-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates aac Accounting System Shell is radius_only, default_method_list,
method_list_name and disable about Accounting Service Network."
DEFVAL { -1 }
::= { aacAccountingServiceIndex 3 }
-- -------------------------------------------------------------
-- Accounting Service Command
-- -------------------------------------------------------------
aacAccountingServiceCommand OBJECT IDENTIFIER ::= { securityAAC 13 }
aacAccountingServiceCommandAdministrator OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which method list Accounting Admin Command Service uses.
If the value is -1, it means disabled."
DEFVAL { -1 }
::= { aacAccountingServiceCommand 1 }
aacAccountingServiceCommandOperator OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which method list Accounting Operator Command Service uses.
If the value is -1, it means disabled."
DEFVAL { -1 }
::= { aacAccountingServiceCommand 2 }
aacAccountingServiceCommandPoweruser OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which method list Accounting PowerUser Command Service uses.
If the value is -1, it means disabled."
DEFVAL { -1 }
::= { aacAccountingServiceCommand 3 }
aacAccountingServiceCommandUser OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which method list Accounting User Command Service uses.
If the value is -1, it means disabled."
DEFVAL { -1 }
::= { aacAccountingServiceCommand 4 }
-- -------------------------------------------------------------
-- Server Password Encryption
-- -------------------------------------------------------------
aacServerPasswordEncryption OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure server password encryption status."
::= { securityAAC 14 }
-- ----------------------------------------------------------------
-- The STATIC ARP group
-- ----------------------------------------------------------------
staticARPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Static MACs"
::= { companyStaticARP 2 }
staticARPEntry OBJECT-TYPE
SYNTAX StaticARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Static MAC entry containing the mac and forwarding port."
INDEX { staticARPIP, staticARPMac}
::= { staticARPTable 1 }
StaticARPEntry ::= SEQUENCE {
staticARPIP IpAddress,
staticARPMac MacAddress,
staticARPRowStatus RowStatus
}
staticARPIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the static ARP IP."
::= { staticARPEntry 2 }
staticARPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the static ARP entry."
::= { staticARPEntry 3 }
staticARPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Static ARP Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. The trunk member port can not set up static ARP."
::= { staticARPEntry 5 }
sysGratuitousARPGlobalSettings OBJECT IDENTIFIER ::= { companyGratuitousARP 1 }
sysGratuitousARPSettings OBJECT IDENTIFIER ::= { companyGratuitousARP 2 }
-- ----------------------------------------------------------------
-- The sysGratuitousARPGlobalSettings group
-- ----------------------------------------------------------------
sysGratuitousARPIPIfStatusUp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Send On IP Interface Status Up is enabled or disabled."
DEFVAL { disable }
::= { sysGratuitousARPGlobalSettings 1 }
sysGratuitousARPDuplicateIPDetected OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Send On Duplicate IP Detected is enabled or disabled."
DEFVAL { disable }
::= { sysGratuitousARPGlobalSettings 2 }
sysGratuitousARPLearning OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Gratuitous ARP Learning is enabled or disabled."
DEFVAL { disable }
::= { sysGratuitousARPGlobalSettings 3 }
-- ----------------------------------------------------------------
-- The sysGratuitousARPSettings group
-- ----------------------------------------------------------------
sysGratuitousARPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysGratuitousARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set/Add Gratuitous ARP interface name and interval time."
::= { sysGratuitousARPSettings 1 }
sysGratuitousARPEntry OBJECT-TYPE
SYNTAX SysGratuitousARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of gratuitous ARP!"
INDEX { sysGratuitousARPIFName }
::= { sysGratuitousARPTable 1 }
SysGratuitousARPEntry ::= SEQUENCE
{
sysGratuitousARPIFName OCTET STRING,
sysGratuitousARPInterval Integer32
}
sysGratuitousARPIFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { sysGratuitousARPEntry 1 }
sysGratuitousARPInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gratuitous ARP interval time for each interface."
DEFVAL { 0 }
::= { sysGratuitousARPEntry 2 }
-- ---------------------------------------------------------------------
-- IP Multi-Interface Function
-- ---------------------------------------------------------------------
ipv4multiIFInfo OBJECT IDENTIFIER ::= { companyMultiIPInterface 1 }
ipv4mulIfMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4MulIfMainEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of interface entries."
::= { ipv4multiIFInfo 1 }
ipv4mulIfMainEntry OBJECT-TYPE
SYNTAX Ipv4MulIfMainEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { ipv4mulifMainIndex, ipv4mulifVLANID }
::= { ipv4mulIfMainTable 1 }
Ipv4MulIfMainEntry ::=
SEQUENCE {
ipv4mulifMainIndex InterfaceIndex,
ipv4mulifVLANID INTEGER,
ipv4mulifName OCTET STRING,
ipv4mulifVLANname OCTET STRING,
ipv4mulifIpAddr IpAddress,
ipv4mulifIpSubnetMask IpAddress,
ipv4mulifMainAdminStatus INTEGER,
ipv4mulifMainOperStatus INTEGER,
ipv4mulifMainRowStatus RowStatus
}
ipv4mulifMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The index of this interface."
::= { ipv4mulIfMainEntry 1 }
ipv4mulifVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The ID of VLAN that you want this interface to be in.
It must be a exist vlan id."
::= { ipv4mulIfMainEntry 2 }
ipv4mulifName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The Description for the interface."
::= { ipv4mulIfMainEntry 3 }
ipv4mulifVLANname OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The vlan name for the interface."
::= { ipv4mulIfMainEntry 4 }
ipv4mulifIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ip address of this interface."
DEFVAL { '00000000'H }
::= { ipv4mulIfMainEntry 6 }
ipv4mulifIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The subnet mask of this interface."
::= { ipv4mulIfMainEntry 7 }
ipv4mulifMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The desired state of the interface."
DEFVAL { disable }
::= { ipv4mulIfMainEntry 8 }
ipv4mulifMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
linkup(1), -- ready to pass packets
linkdown(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The current operational state of the interface."
::= { ipv4mulIfMainEntry 9 }
ipv4mulifMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of an entry in the Multi Interface Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available."
::= { ipv4mulIfMainEntry 10 }
-- ---------------------------------------------------------------------
-- IPv6 Multi-Interface Function
-- ---------------------------------------------------------------------
multiIFSupportV4V6Info OBJECT IDENTIFIER ::= { companyMultiIPInterface 2 }
-- ---------------------------------------------------------------------
-- ---------------------------------------------------------------------
mulIfSupportV4V6MainTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulIfSupportV4V6MainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries."
::= { multiIFSupportV4V6Info 1 }
mulIfSupportV4V6MainEntry OBJECT-TYPE
SYNTAX MulIfSupportV4V6MainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { mulifMainIndex, mulifVLANID }
::= { mulIfSupportV4V6MainTable 1 }
MulIfSupportV4V6MainEntry ::=
SEQUENCE {
mulifMainIndex InterfaceIndex,
mulifVLANID INTEGER,
mulifName OCTET STRING,
mulifVLANname OCTET STRING,
mulifIpAddr IpAddress,
mulifIpSubnetMask IpAddress,
mulifMainAdminStatus INTEGER,
mulifMainOperStatus INTEGER,
mulifv6GlobalStatus INTEGER, -- Support IPv6 or not.
mulifv6DHCPStatus INTEGER, -- Support DHCPv6 or not.
mulifv6AutolinkloStatus INTEGER, -- Automatic Link local Address Status.
mulifv6NSRetransmitTime INTEGER, -- NS Retransmit Time Settings.
mulifMainRowStatus RowStatus -- Entries Row status.
}
mulifMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this interface."
::= { mulIfSupportV4V6MainEntry 1 }
mulifVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of VLAN that you want this interface to be in.
It must be a exist vlan id."
::= { mulIfSupportV4V6MainEntry 2 }
mulifName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Description for the interface."
::= { mulIfSupportV4V6MainEntry 3 }
mulifVLANname OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan name for the interface."
::= { mulIfSupportV4V6MainEntry 4 }
mulifIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ip address of this interface."
DEFVAL { '00000000'H }
::= { mulIfSupportV4V6MainEntry 5 }
mulifIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of this interface."
::= { mulIfSupportV4V6MainEntry 6 }
mulifMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface."
DEFVAL { disable }
::= { mulIfSupportV4V6MainEntry 7 }
mulifMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
linkup(1), -- ready to pass packets
linkdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface."
::= { mulIfSupportV4V6MainEntry 8 }
mulifv6GlobalStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ID of VLAN that you want this interface to be in.
It must be a exist vlan id."
::= { mulIfSupportV4V6MainEntry 9 }
mulifv6DHCPStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of DHCPv6 that you want this interface to be in.
It must be a exist vlan id."
::= { mulIfSupportV4V6MainEntry 10 }
mulifv6AutolinkloStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The global state of link local that you want this interface to be in.
It must be a exist vlan id."
::= { mulIfSupportV4V6MainEntry 11 }
mulifv6NSRetransmitTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The NS's retransmit time that you want this interface to be in.
It must be a exist vlan id."
::= { mulIfSupportV4V6MainEntry 12 }
mulifMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Multi Interface Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available."
::= { mulIfSupportV4V6MainEntry 13 }
-- ---------------------------------------------------------------------
-- ---------------------------------------------------------------------
mulIfV6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulIfV6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries."
::= { multiIFSupportV4V6Info 2 }
mulIfV6AddressEntry OBJECT-TYPE
SYNTAX MulIfV6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { mulifV6AddressMainIndex, mulifV6AddressIpAddr, mulifV6AddressIpPrefix }
::= { mulIfV6AddressTable 1 }
MulIfV6AddressEntry ::=
SEQUENCE {
mulifV6AddressMainIndex InterfaceIndex,
mulifV6AddressIpAddr Ipv6Address, -- IPv6 Address.
mulifV6AddressIpPrefix INTEGER, -- IPv6 Address Prefix.
mulifV6AddressIpType INTEGER, -- IP type (Link-local, Global, anycast).
mulifV6AddressRowStatus RowStatus -- IPv6 Address entries row status.
}
mulifV6AddressMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this IPv6 entry."
::= { mulIfV6AddressEntry 1 }
mulifV6AddressIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of this IPv6 entry."
DEFVAL { '00000000'H }
::= { mulIfV6AddressEntry 2 }
mulifV6AddressIpPrefix OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip prefix of this IPv6 entry."
::= { mulIfV6AddressEntry 3 }
mulifV6AddressIpType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
linklocal(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip type of this IPv6 entry."
::= { mulIfV6AddressEntry 4 }
mulifV6AddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Multi Interface Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available."
::= { mulIfV6AddressEntry 5 }
-- start DLINK_AGENT_BACIC_INFO
agentCPUutilization OBJECT IDENTIFIER ::= { companyAgentBasicInfo 1 }
agentMEMutilization OBJECT IDENTIFIER ::= { companyAgentBasicInfo 2 }
-- ----------------------------------------------------------------
-- The agentCPUutilization group
-- ----------------------------------------------------------------
agentCPUutilizationIn5sec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time scale is set at 5 second intervals.
The value will be between 0% (idle) and 100% (very busy)."
::= { agentCPUutilization 1 }
agentCPUutilizationIn1min OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time scale is set at 1 minute intervals.
The value will be between 0% (idle) and 100% (very busy)."
::= { agentCPUutilization 2 }
agentCPUutilizationIn5min OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time scale is set at 5 minute intervals.
The value will be between 0% (idle) and 100% (very busy)."
::= { agentCPUutilization 3 }
-- ----------------------------------------------------------------
-- The agentMEMutilization group
-- ----------------------------------------------------------------
agentMEMutilizationIn5sec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time scale is set at 5 second intervals.
The value will be between 0% (idle) and 100% (very busy)."
::= { agentMEMutilization 1 }
agentMEMutilizationIn1min OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time scale is set at 1 minute intervals.
The value will be between 0% (idle) and 100% (very busy)."
::= { agentMEMutilization 2 }
agentMEMutilizationIn5min OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time scale is set at 5 minute intervals.
The value will be between 0% (idle) and 100% (very busy)."
::= { agentMEMutilization 3 }
-- end DLINK_AGENT_BACIC_INFO
-- ----------------------------------------------------------
-- The companyL2PT Groups
-- ----------------------------------------------------------
-- L2PT Group --------------------------------------------- --
-- -----------------------------------------------------------------------------
-- swL2PTState
-- -----------------------------------------------------------------------------
l2PTState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the global state of Layer 2 protocol tunneling."
::= { companyL2PT 1 }
-- -----------------------------------------------------------------------------
-- L2PTPortTable
-- -----------------------------------------------------------------------------
l2PTPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that cont
ains the cable situation for each port."
::= { companyL2PT 2 }
l2PTEntry OBJECT-TYPE
SYNTAX L2PTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cable situations for each port on the device."
INDEX { l2PTPortIndex }
::= { l2PTPortTable 1 }
L2PTEntry ::=
SEQUENCE {
l2PTPortIndex
INTEGER,
l2PTPortType
INTEGER,
l2PTProtocol
BITS
}
l2PTPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the port number.
For all machines give maximum port number."
::= { l2PTEntry 1 }
l2PTPortType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
uni(2),
nni(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Layer 2 protocol tunneling port type.
The 'none' value indicates that the port is normal. Layer 2 protocol tunneling
is disabled on this port.
The 'uni' value indicates that the port is connected to the customer site.
A Layer 2 PDU received on a UNI port can be tunneled to a remote customer site across the provider network.
The 'nni' value indicates that the port is connected to the provider network.
A Tunneled Layer 2 PDU received on an NNI port will be restored to its original format."
DEFVAL { none }
::= { l2PTEntry 2 }
l2PTProtocol OBJECT-TYPE
SYNTAX BITS {
stp(0),
gvrp(1),
macCC(2),
macCD(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the tunneled protocols on this port.
This object can only be applied on a UNI port.
If the 'stp' BIT is set, the STP BPDU will be tunneled.
If the 'gvrp' BIT is set, the GVRP PDU will be tunneled.
If the 'mac-01-00-0C-CC-CC-CC' BIT is set, the PDU with the
destination MAC address 01-00-0C-CC-CC-CC will be tunneled .
If the 'mac-01-00-0C-CC-CC-CD' BIT is set, then the PDU with the
destination MAC address 01-00-0C-CC-CC-CD will be tunneled."
::= { l2PTEntry 3 }
-- -----------------------------------------------------------------------------
-- L2PTThresholdTable
-- -----------------------------------------------------------------------------
l2PTThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PTThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the protocol tunneling threshold of a UNI port."
::= { companyL2PT 3}
l2PTThresholdEntry OBJECT-TYPE
SYNTAX L2PTThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list with the Layer2 Protocol tunneling threshold."
INDEX { l2PTPortIndex, l2PTProtocolIndex }
::= { l2PTThresholdTable 1 }
L2PTThresholdEntry ::=
SEQUENCE {
l2PTProtocolIndex
INTEGER,
l2PTDropThreshold
INTEGER
}
l2PTProtocolIndex OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
gvrp(2),
macCC(3),
macCD(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunneled protocol of the port."
::= { l2PTThresholdEntry 1 }
l2PTDropThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the drop threshold for a given protocol on a UNI port.
If the arrival rate of a tunneled protocol has reached its threshold, the received
PDUs of this protocol will be dropped.
The value 0 indicates there is no threshold for the protocol."
DEFVAL { 0 }
::= { l2PTThresholdEntry 2 }
-- ----------------------------------------------------------
-- The companyCpuProtect Groups
-- ----------------------------------------------------------
cpuProtectState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the cpu protect."
::= { companyCpuProtect 1 }
cpuProtectTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that holds the cpu protect settings of the device."
::= { companyCpuProtect 2 }
cpuProtectEntry OBJECT-TYPE
SYNTAX CpuProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cpu protect settings of the device."
INDEX { cpuProtectType }
::= { cpuProtectTable 1 }
CpuProtectEntry ::=
SEQUENCE {
cpuProtectType
INTEGER,
cpuProtectPPS
INTEGER
}
cpuProtectType OBJECT-TYPE
SYNTAX INTEGER {
arp(1),
bpdu(2),
icmp(3),
igmp(4),
snmp(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Cpu protect type."
::= { cpuProtectEntry 1 }
cpuProtectPPS OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the threshold as packet count per second at which traffic is received on the CPU port.
If value set to -1, it means no threshold."
::= { cpuProtectEntry 2 }
-- ------------------------------------------------------------------
-- The SMTP Group
-- ------------------------------------------------------------------
ipv4smtpState OBJECT-TYPE
SYNTAX INTEGER { disabled(0),enabled(1) }
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Enable or Disable SMTP function."
::= { companySMTP 1 }
ipv4smtpServerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"SMTP Server's IP Address"
::= { companySMTP 2 }
ipv4smtpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"SMTP Server's port"
::= { companySMTP 3}
ipv4smtpSelfMailAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The sender's (DUT) mail address ."
::= { companySMTP 4 }
-- ------------------------------------------------------------------
-- smtpRecvMailAddrTable
-- ------------------------------------------------------------------
ipv4smtpRecvMailAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4SmtpRecvMailAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Receivers' mail address table."
::= { companySMTP 5 }
ipv4smtpRecvMailAddrEntry OBJECT-TYPE
SYNTAX Ipv4SmtpRecvMailAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Receivers' mail address entry."
INDEX { ipv4smtpRecvMailAddrIndex }
::= { ipv4smtpRecvMailAddrTable 1 }
Ipv4SmtpRecvMailAddrEntry ::=
SEQUENCE {
ipv4smtpRecvMailAddrIndex INTEGER,
ipv4smtpRecvMailAddr OCTET STRING,
ipv4smtpRecvMailAddrStatus RowStatus
}
ipv4smtpRecvMailAddrIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receivers' mail address index (1~8)."
::= { ipv4smtpRecvMailAddrEntry 1 }
ipv4smtpRecvMailAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receivers' mail address."
::= { ipv4smtpRecvMailAddrEntry 2 }
ipv4smtpRecvMailAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rowstatus of the receiver's mail address."
::= { ipv4smtpRecvMailAddrEntry 3 }
--IPv6 smtp server Group
sysSMTPServerGroup OBJECT IDENTIFIER ::= { companySMTP 6 }
smtpState OBJECT-TYPE
SYNTAX INTEGER { disabled(0),enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable SMTP function."
::= { sysSMTPServerGroup 1 }
smtpServerAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP Server's IP Address"
::= { sysSMTPServerGroup 2 }
smtpServerAddrType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP Server's Address type."
::= { sysSMTPServerGroup 3 }
smtpServerAddrInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name when the smtpServerAddrInterfaceName is linklocal address."
::= { sysSMTPServerGroup 4 }
smtpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP Server's port"
::= { sysSMTPServerGroup 5}
smtpSelfMailAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sender's (DUT) mail address ."
::= { sysSMTPServerGroup 6 }
-- ------------------------------------------------------------------
-- smtpRecvMailAddrTable
-- ------------------------------------------------------------------
smtpRecvMailAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpRecvMailAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Receivers' mail address table."
::= { sysSMTPServerGroup 7 }
smtpRecvMailAddrEntry OBJECT-TYPE
SYNTAX SmtpRecvMailAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Receivers' mail address entry."
INDEX { smtpRecvMailAddrIndex }
::= { smtpRecvMailAddrTable 1 }
SmtpRecvMailAddrEntry ::=
SEQUENCE {
smtpRecvMailAddrIndex INTEGER,
smtpRecvMailAddr OCTET STRING,
smtpRecvMailAddrStatus RowStatus
}
smtpRecvMailAddrIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receivers' mail address index (1~8)."
::= { smtpRecvMailAddrEntry 1 }
smtpRecvMailAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receivers' mail address."
::= { smtpRecvMailAddrEntry 2 }
smtpRecvMailAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rowstatus of the receiver's mail address."
::= { smtpRecvMailAddrEntry 3 }
igmpMulticastVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IGMP Multicast Vlan function."
DEFVAL { disabled }
::= { companyISMVLAN 1 }
-- ----------------------------------------------------------
-- igmpMulticastVlanTable Table
-- ----------------------------------------------------------
igmpMulticastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the IGMP snooping multicast VLAN table."
::= { companyISMVLAN 2 }
igmpMulticastVlanEntry OBJECT-TYPE
SYNTAX IgmpMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of igmpMulticastVlanTable."
INDEX { igmpMulticastVlanid}
::= { igmpMulticastVlanTable 1 }
IgmpMulticastVlanEntry ::=
SEQUENCE {
igmpMulticastVlanid
INTEGER,
igmpMulticastVlanName
DisplayString,
igmpMulticastVlanSourcePort
PortList,
igmpMulticastVlanMemberPort
PortList,
igmpMulticastVlanTagMemberPort
PortList,
igmpMulticastVlanUntaggedSourcePort
PortList,
igmpMulticastVlanState
INTEGER,
igmpMulticastVlanReplaceSourceIp
IpAddress,
-- start DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
igmpMulticastVlanRemapPriority
INTEGER,
igmpMulticastVlanReplacePriority
INTEGER,
-- end DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
igmpMulticastVlanRowStatus
RowStatus
}
igmpMulticastVlanid OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry."
::= { igmpMulticastVlanEntry 1 }
igmpMulticastVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry."
::= { igmpMulticastVlanEntry 2 }
igmpMulticastVlanSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { igmpMulticastVlanEntry 3 }
igmpMulticastVlanMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { igmpMulticastVlanEntry 4 }
igmpMulticastVlanTagMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN."
::= { igmpMulticastVlanEntry 5 }
igmpMulticastVlanUntaggedSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the untag source ports of the IGMP
snooping multicast VLAN."
::= { igmpMulticastVlanEntry 6 }
igmpMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable or disable the IGMP snooping multicast VLAN."
::= { igmpMulticastVlanEntry 7 }
igmpMulticastVlanReplaceSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement source IP of this multicast VLAN."
::= { igmpMulticastVlanEntry 8 }
-- start DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
igmpMulticastVlanRemapPriority OBJECT-TYPE
SYNTAX INTEGER (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remap priority of this multicast VLAN."
DEFVAL { -1 }
::= { igmpMulticastVlanEntry 9 }
igmpMulticastVlanReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement priority of this multicast VLAN."
DEFVAL { disabled }
::= { igmpMulticastVlanEntry 10 }
-- end DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
igmpMulticastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { igmpMulticastVlanEntry 11 }
-- -----------------------------------------------------------------------------
-- igmpMulticastVlanGroupTable
-- -----------------------------------------------------------------------------
igmpMulticastVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the IGMP snooping multicast VLAN group information"
::= { companyISMVLAN 3 }
igmpMulticastVlanGroupEntry OBJECT-TYPE
SYNTAX IgmpMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping multicast VLAN group."
INDEX { igmpMulticastVlanGroupVid, igmpMulticastVlanGroupFromIp, igmpMulticastVlanGroupToIp }
::= { igmpMulticastVlanGroupTable 1 }
IgmpMulticastVlanGroupEntry ::=
SEQUENCE {
igmpMulticastVlanGroupVid
INTEGER,
igmpMulticastVlanGroupFromIp
IpAddress,
igmpMulticastVlanGroupToIp
IpAddress,
igmpMulticastVlanGroupStatus
RowStatus
}
igmpMulticastVlanGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the IGMP snooping multicast VLAN group."
::= { igmpMulticastVlanGroupEntry 1 }
igmpMulticastVlanGroupFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { igmpMulticastVlanGroupEntry 2 }
igmpMulticastVlanGroupToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { igmpMulticastVlanGroupEntry 3 }
igmpMulticastVlanGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { igmpMulticastVlanGroupEntry 4 }
-- ----------------------------------------------------------
-- multicastVlanTable Table
-- ----------------------------------------------------------
multicastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the IGMP/MLD snooping multicast VLAN table."
::= { companyISMVLAN 4 }
multicastVlanEntry OBJECT-TYPE
SYNTAX MulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of multicastVlanTable."
INDEX { multicastVlanid}
::= { multicastVlanTable 1 }
MulticastVlanEntry ::=
SEQUENCE {
multicastVlanid
INTEGER,
multicastVlanName
DisplayString,
multicastVlanSourcePort
PortList,
multicastVlanMemberPort
PortList,
multicastVlanTagMemberPort
PortList,
multicastVlanUntaggedSourcePort
PortList,
multicastVlanState
INTEGER,
multicastVlanIgmpReplaceSourceIp
IpAddress,
multicastVlanMldReplaceSourceIp
Ipv6Address,
-- start DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
multicastVlanRemapPriority
INTEGER,
multicastVlanReplacePriority
INTEGER,
-- end DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
multicastVlanRowStatus
RowStatus
}
multicastVlanid OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the IGMP/MLD snooping
multicast VLAN entry."
::= { multicastVlanEntry 1 }
multicastVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the IGMP/MLD snooping
multicast VLAN entry."
::= { multicastVlanEntry 2 }
multicastVlanSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the source ports of the
IGMP/MLD snooping multicast VLAN. The source ports will be set as
tag ports of the VLAN entry and the IGMP control messages received
from themember ports will be forwarded to the source ports."
::= { multicastVlanEntry 3 }
multicastVlanMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the member ports of the
IGMP/MLD snooping multicast VLAN. The source ports will be set as
untagged ports of the VLAN entry and the IGMP control messages
received from themember ports will be forwarded to the source ports."
::= { multicastVlanEntry 4 }
multicastVlanTagMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the tag member ports of the
IGMP/MLD snooping multicast VLAN."
::= { multicastVlanEntry 5 }
multicastVlanUntaggedSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the untag source ports of the
IGMP/MLD snooping multicast VLAN."
::= { multicastVlanEntry 6 }
multicastVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable or disable the IGMP/MLD snooping
multicast VLAN."
::= { multicastVlanEntry 7 }
multicastVlanIgmpReplaceSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement source IP of this IGMP snooping multicast VLAN."
::= { multicastVlanEntry 8 }
multicastVlanMldReplaceSourceIp OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement source IP of this MLD snooping multicast VLAN."
::= { multicastVlanEntry 9 }
-- start DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
multicastVlanRemapPriority OBJECT-TYPE
SYNTAX INTEGER (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remap priority of this multicast VLAN."
DEFVAL { -1 }
::= { multicastVlanEntry 10 }
multicastVlanReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement priority of this multicast VLAN."
DEFVAL { disabled }
::= { multicastVlanEntry 11 }
-- end DLINK_ISMVLAN_REMAP_REPLACE_PRIORITY
multicastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { multicastVlanEntry 12 }
-- -----------------------------------------------------------------------------
-- igmpMulticastVlanGroupTable
-- -----------------------------------------------------------------------------
multicastVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the IGMP/MLD snooping multicast VLAN group information"
::= { companyISMVLAN 5 }
multicastVlanGroupEntry OBJECT-TYPE
SYNTAX MulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of multicastVlanGroupTable."
INDEX { multicastVlanGroupVid, multicastVlanGroupIpType, multicastVlanGroupFromIp, multicastVlanGroupToIp }
::= { multicastVlanGroupTable 1 }
MulticastVlanGroupEntry ::=
SEQUENCE {
multicastVlanGroupVid
INTEGER,
multicastVlanGroupIpType
INTEGER,
multicastVlanGroupFromIp
Ipv6Address,
multicastVlanGroupToIp
Ipv6Address,
multicastVlanGroupStatus
RowStatus
}
multicastVlanGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the IGMP/MLD snooping multicast VLAN group."
::= { multicastVlanGroupEntry 1 }
multicastVlanGroupIpType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of specifies the multicast address list for this VLAN."
::= { multicastVlanGroupEntry 2 }
multicastVlanGroupFromIp OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { multicastVlanGroupEntry 3 }
multicastVlanGroupToIp OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { multicastVlanGroupEntry 4 }
multicastVlanGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { multicastVlanGroupEntry 5 }
-- -----------------------------------------------------------------------------
-- The Guest Vlan Group
-- -----------------------------------------------------------------------------
pppoeGlobalState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE global state"
::= { companyPPPoE 1 }
pppoePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PppoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control PPPoE features of the device."
::= { companyPPPoE 2 }
pppoePortEntry OBJECT-TYPE
SYNTAX PppoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in PPPoE table for each interface
in the system."
INDEX {pppoePortIndex}
::= { pppoePortTable 1 }
PppoePortEntry ::=
SEQUENCE {
pppoePortIndex
Integer32,
pppoePortState
INTEGER,
pppoePortCircuitIDType
INTEGER,
pppoePortUDFString
DisplayString,
pppoePortCircuitIDVendor3String
DisplayString,
pppoePortRemoteIDType
INTEGER,
pppoePortRemoteIDVendor3String
DisplayString
}
pppoePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { pppoePortEntry 1 }
pppoePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE per port state"
::= { pppoePortEntry 2 }
pppoePortCircuitIDType OBJECT-TYPE
SYNTAX INTEGER {
ip (0),
mac (1),
udf (2),
vendor2 (3),
vendor3 (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE per port circuit ID type"
::= { pppoePortEntry 3 }
pppoePortUDFString OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE per port UDF string"
::= { pppoePortEntry 4 }
pppoePortCircuitIDVendor3String OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE per port circuit ID vendor3 string"
::= { pppoePortEntry 5 }
pppoePortRemoteIDType OBJECT-TYPE
SYNTAX INTEGER {
default (0),
vendor2 (1),
vendor3 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE per port remote ID type"
::= { pppoePortEntry 6 }
pppoePortRemoteIDVendor3String OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE per port remote ID vendor3 string"
::= { pppoePortEntry 7 }
-- ----------------------------------------------------------------
-- The RMON group
-- ----------------------------------------------------------------
rmonGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling RMON function."
::= { companyRMON 1 }
rmonStatistics OBJECT IDENTIFIER ::= { companyRMON 2 }
rmonHistory OBJECT IDENTIFIER ::= { companyRMON 3 }
rmonAlarm OBJECT IDENTIFIER ::= { companyRMON 4 }
rmonEvent OBJECT IDENTIFIER ::= { companyRMON 5 }
-- The Ethernet Statistics Group
--
-- Implementation of the Ethernet Statistics group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The ethernet statistics group contains statistics measured by the
-- probe for each monitored interface on this device. These
-- statistics take the form of free running counters that start from
-- zero when a valid entry is created.
--
-- This group currently has statistics defined only for
-- Ethernet interfaces. Each etherStatsEntry contains statistics
-- for one Ethernet interface. The probe must create one
-- etherStats entry for each monitored Ethernet interface
-- on the device.
rmonStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet statistics entries."
::= { rmonStatistics 1 }
rmonStatsEntry OBJECT-TYPE
SYNTAX RmonStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1"
INDEX { rmonStatsIndex }
::= { rmonStatsTable 1 }
RmonStatsEntry ::= SEQUENCE {
rmonStatsIndex Integer32,
rmonStatsDataSource OBJECT IDENTIFIER,
rmonStatsOwner OwnerString,
rmonStatsStatus RmonStatus
}
rmonStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this
etherStats entry."
::= { rmonStatsEntry 1 }
rmonStatsDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shall identify the instance of the ifIndex object,
defined in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
etherStatsStatus object is equal to valid(1)."
::= { rmonStatsEntry 2 }
rmonStatsOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonStatsEntry 3 }
rmonStatsStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this etherStats entry."
::= { rmonStatsEntry 4 }
-- The History Control Group
-- Implementation of the History Control group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The history control group controls the periodic statistical
-- sampling of data from various types of networks. The
-- historyControlTable stores configuration entries that each
-- define an interface, polling period, and other parameters.
-- Once samples are taken, their data is stored in an entry
-- in a media-specific table. Each such entry defines one
-- sample, and is associated with the historyControlEntry that
-- caused the sample to be taken. Each counter in the
-- etherHistoryEntry counts the same event as its similarly-named
-- counterpart in the etherStatsEntry, except that each value here
-- is a cumulative sum during a sampling period.
--
-- If the probe keeps track of the time of day, it should start
-- the first sample of the history at a time such that
-- when the next hour of the day begins, a sample is
-- started at that instant. This tends to make more
-- user-friendly reports, and enables comparison of reports
-- from different probes that have relatively accurate time
-- of day.
--
-- The probe is encouraged to add two history control entries
-- per monitored interface upon initialization that describe a short
-- term and a long term polling period. Suggested parameters are 30
-- seconds for the short term polling period and 30 minutes for
-- the long term period.
rmonHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of history control entries."
::= { rmonHistory 1 }
rmonHistoryEntry OBJECT-TYPE
SYNTAX RmonHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2"
INDEX { rmonHistoryIndex }
::= { rmonHistoryTable 1 }
RmonHistoryEntry ::= SEQUENCE {
rmonHistoryIndex Integer32,
rmonHistoryDataSource OBJECT IDENTIFIER,
rmonHistoryBucketsRequested Integer32,
rmonHistoryInterval Integer32,
rmonHistoryOwner OwnerString,
rmonHistoryStatus RmonStatus
}
rmonHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { rmonHistoryEntry 1 }
rmonHistoryDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In order to identify
a particular interface, this object shall identify
the instance of the ifIndex object, defined
in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1)."
::= { rmonHistoryEntry 2 }
rmonHistoryBucketsRequested OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.
When this object is created or modified, the probe
should set historyControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { rmonHistoryEntry 3 }
rmonHistoryInterval OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager will
take into account the possibility of overflow in any of
the associated counters. It is important to consider the
minimum time in which any counter could overflow on a
particular media type and set the historyControlInterval
object to a value less than this interval. This is
typically most important for the 'octets' counter in any
media-specific table. For example, on an Ethernet
network, the etherHistoryOctets counter could overflow
in about one hour at the Ethernet's maximum
utilization.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { rmonHistoryEntry 4 }
rmonHistoryOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonHistoryEntry 5 }
rmonHistoryStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this historyControl entry.
Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1)."
::= { rmonHistoryEntry 6 }
-- The Alarm Group
-- Implementation of the Alarm group is optional. The Alarm Group
-- requires the implementation of the Event group.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Alarm group periodically takes statistical samples from
-- variables in the probe and compares them to thresholds that have
-- been configured. The alarm table stores configuration
-- entries that each define a variable, polling period, and
-- threshold parameters. If a sample is found to cross the
-- threshold values, an event is generated. Only variables that
-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
-- this way.
--
-- This function has a hysteresis mechanism to limit the generation
-- of events. This mechanism generates one event as a threshold
-- is crossed in the appropriate direction. No more events are
-- generated for that threshold until the opposite threshold is
-- crossed.
--
-- In the case of a sampling a deltaValue, a probe may implement
-- this mechanism with more precision if it takes a delta sample
-- twice per period, each time comparing the sum of the latest two
-- samples to the threshold. This allows the detection of threshold
-- crossings that span the sampling boundary. Note that this does
-- not require any special configuration of the threshold value.
-- It is suggested that probes implement this more precise algorithm.
rmonAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of alarm entries."
::= { rmonAlarm 1 }
rmonAlarmEntry OBJECT-TYPE
SYNTAX RmonAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8"
INDEX { rmonAlarmIndex }
::= { rmonAlarmTable 1 }
RmonAlarmEntry ::= SEQUENCE {
rmonAlarmIndex Integer32,
rmonAlarmInterval Integer32,
rmonAlarmVariable OBJECT IDENTIFIER,
rmonAlarmSampleType INTEGER,
rmonAlarmRisingThreshold Integer32,
rmonAlarmFallingThreshold Integer32,
rmonAlarmRisingEventIndex Integer32,
rmonAlarmFallingEventIndex Integer32,
rmonAlarmOwner OwnerString,
rmonAlarmStatus RmonStatus
}
rmonAlarmIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device."
::= { rmonAlarmEntry 1 }
rmonAlarmInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 2 }
rmonAlarmVariable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely
in terms of the contents of MIB views, no access
control mechanism exists that can restrict the value of
this object to identify only those objects that exist
in a particular MIB view. Because there is thus no
acceptable means of restricting the read access that
could be obtained through the alarm mechanism, the
probe must only grant write access to this object in
those views that have read access to all objects on
the probe.
During a set operation, if the supplied variable name is
not available in the selected MIB view, a badValue error
must be returned. If at any time the variable name of
an established alarmEntry is no longer available in the
selected MIB view, the probe must change the status of
this alarmEntry to invalid(4).
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 3 }
rmonAlarmSampleType OBJECT-TYPE
SYNTAX INTEGER {
absoluteValue(1),
deltaValue(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 4 }
rmonAlarmRisingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is greater than or
equal to this threshold and the associated
alarmStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
alarmFallingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 5 }
rmonAlarmFallingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is less than or
equal to this threshold and the associated
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
alarmRisingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 6 }
rmonAlarmRisingEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 7 }
rmonAlarmFallingEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 8 }
rmonAlarmOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonAlarmEntry 9 }
rmonAlarmStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this alarm entry."
::= { rmonAlarmEntry 10 }
-- The Event Group
-- Implementation of the Event group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Event group controls the generation and notification
-- of events from this device. Each entry in the eventTable
-- describes the parameters of the event that can be triggered.
-- Each event entry is fired by an associated condition located
-- elsewhere in the MIB. An event entry may also be associated
-- with a function elsewhere in the MIB that will be executed
-- when the event is generated. For example, a channel may
-- be turned on or off by the firing of an event.
--
-- Each eventEntry may optionally specify that a log entry
-- be created on its behalf whenever the event occurs.
-- Each entry may also specify that notification should
-- occur by way of SNMP trap messages. In this case, the
-- community for the trap message is given in the associated
-- eventCommunity object. The enterprise and specific trap
-- fields of the trap are determined by the condition that
-- triggered the event. Two traps are defined: risingAlarm and
-- fallingAlarm. If the eventTable is triggered by a condition
-- specified elsewhere, the enterprise and specific trap fields
-- must be specified for traps generated for that condition.
rmonEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of events to be generated."
::= { rmonEvent 1 }
rmonEventEntry OBJECT-TYPE
SYNTAX RmonEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6"
INDEX { rmonEventIndex }
::= { rmonEventTable 1 }
RmonEventEntry ::= SEQUENCE {
rmonEventIndex Integer32,
rmonEventDescription DisplayString,
rmonEventType INTEGER,
rmonEventCommunity OCTET STRING,
rmonEventOwner OwnerString,
rmonEventStatus RmonStatus
}
rmonEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur."
::= { rmonEventEntry 1 }
rmonEventDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A comment describing this event entry."
::= { rmonEventEntry 2 }
rmonEventType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
log(2),
snmptrap(3), -- send an SNMP trap
logandtrap(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management stations."
::= { rmonEventEntry 3 }
rmonEventCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string."
::= { rmonEventEntry 4 }
rmonEventOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it.
If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connected
management stations should retrieve those log entries,
as they may have significance to all management stations
connected to this device"
::= { rmonEventEntry 5 }
rmonEventStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this event entry.
If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent."
::= { rmonEventEntry 6 }
-- ----------------------------------------------------------------
-- The Neighbor Setting group
-- ----------------------------------------------------------------
neighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Neighbor Cache Table."
::= { companyNeighbor 1 }
neighborEntry OBJECT-TYPE
SYNTAX NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Neighbor cache entry containing the ifindex and ipv6 addr."
INDEX { neighborIfindex, neighborIPv6Addr, neighborMACAddr}
::= { neighborTable 1 }
NeighborEntry ::= SEQUENCE {
neighborIfindex INTEGER,
neighborIPv6Addr Ipv6Address,
neighborMACAddr MacAddress,
neighborType INTEGER,
neighborCacheState INTEGER,
neighborActiveStatus INTEGER,
neighborRowStatus RowStatus
}
neighborIfindex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the Neighbor entry.
Must be conform to the existing interface name."
::= { neighborEntry 1 }
neighborIPv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows the entry of an IP address that will be a Neighbor entry into
the Neighbor Cache Table."
::= { neighborEntry 2 }
neighborMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the Neighbor entry."
::= { neighborEntry 3 }
neighborType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type associated of the Neighbor entry."
::= { neighborEntry 4 }
neighborCacheState OBJECT-TYPE
SYNTAX INTEGER {
static(1),
reachable(2),
incomplete(3),
stale(4),
delay(5),
probe(6),
notinservice(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type associated of the Neighbor entry."
::= { neighborEntry 5 }
neighborActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active status of the Neighbor entry."
::= { neighborEntry 6 }
neighborRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Neighbor Cache Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy) are available."
::= { neighborEntry 7 }
dhcpv6RelayControl OBJECT IDENTIFIER ::= { companyDHCPv6Relay 1 }
dhcpv6RelayManagement OBJECT IDENTIFIER ::= { companyDHCPv6Relay 2 }
dhcpv6RelayOption37 OBJECT IDENTIFIER ::= { companyDHCPv6Relay 3 }
dhcpv6RelayOption38 OBJECT IDENTIFIER ::= { companyDHCPv6Relay 4 }
dhcpv6RelayOption18 OBJECT IDENTIFIER ::= { companyDHCPv6Relay 5 }
-- ----------------------------------------------------------
-- The DHCPv6 Relay
-- ----------------------------------------------------------
-- The DHCPv6 Relay Control
dhcpv6RelayState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCPv6 relay function is enabled or disabled."
::= { dhcpv6RelayControl 1 }
dhcpv6RelayHopCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of router hops that the DHCPv6 packets can cross."
::= { dhcpv6RelayControl 2 }
-- The DHCPv6 Relay Management
-- The DHCPv6 Relay Interface Settings Table
dhcpv6RelayInterfaceSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPv6RelayInterfaceSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (relay) DHCP packets to."
::= { dhcpv6RelayManagement 1 }
dhcpv6RelayInterfaceSettingsEntry OBJECT-TYPE
SYNTAX DHCPv6RelayInterfaceSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (relay) DHCP packets to."
INDEX { dhcpv6RelayInterface, dhcpv6RelayServerIP}
::= { dhcpv6RelayInterfaceSettingsTable 1 }
DHCPv6RelayInterfaceSettings ::=
SEQUENCE {
dhcpv6RelayInterface
DisplayString,
dhcpv6RelayServerIP
Ipv6Address,
dhcpv6RelayInterfaceSettingsRowStatus
RowStatus
}
dhcpv6RelayInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of router hops that the DHCPv6 packets can cross."
::= { dhcpv6RelayInterfaceSettingsEntry 1 }
dhcpv6RelayServerIP OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DHCP server IP address."
::= { dhcpv6RelayInterfaceSettingsEntry 2 }
dhcpv6RelayInterfaceSettingsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { dhcpv6RelayInterfaceSettingsEntry 99 }
-- The DHCPv6 Relay Option37
dhcpv6RelayOption37State OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCPv6 relay option 37 function is enabled or disabled."
::= { dhcpv6RelayOption37 1 }
dhcpv6RelayOption37CheckState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCPv6 relay option 37 Check function is enabled or disabled."
::= { dhcpv6RelayOption37 2 }
-- dhcpv6RelayOption37Policy OBJECT-TYPE
-- SYNTAX INTEGER {
-- replace(1),
-- drop(2),
-- keep(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates DHCPv6 relay option 37 policy."
-- ::= { dhcpv6RelayOption37 3 }
dhcpv6RelayOption37RemoteIDType OBJECT-TYPE
SYNTAX INTEGER {
default(0),
cid-with-user-define(1),
user-define(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of remote ID."
::= { dhcpv6RelayOption37 3 }
dhcpv6RelayOption37RemoteID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object displays the current remote ID of the device.
If RemoteIDType is set to default, the value will be the MAC address of the device,
and this object cannot be modified.
If RemoteIDType is set to user-defined, a new value can be written to this object."
::= { dhcpv6RelayOption37 4 }
dhcpv6RelayOpt38Table OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6RelayOpt38Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control port security features of the device."
::= { dhcpv6RelayOption38 1 }
dhcpv6RelayOpt38Entry OBJECT-TYPE
SYNTAX Dhcpv6RelayOpt38Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in port security table for each interface
in the system."
INDEX { dhcpv6RelayOpt38PortIndex }
::= { dhcpv6RelayOpt38Table 1 }
Dhcpv6RelayOpt38Entry ::=
SEQUENCE {
dhcpv6RelayOpt38PortIndex
Integer32,
dhcpv6RelayOpt38PortState
INTEGER,
dhcpv6RelayOpt38PortType
INTEGER,
dhcpv6RelayOpt38PortID
DisplayString
}
dhcpv6RelayOpt38PortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies.
For all machines give maximum port number."
::= { dhcpv6RelayOpt38Entry 1 }
dhcpv6RelayOpt38PortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0), enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / disable option 38 port state."
::= { dhcpv6RelayOpt38Entry 2 }
dhcpv6RelayOpt38PortType OBJECT-TYPE
SYNTAX INTEGER {
default (0), user-defined (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure option 38 port Type."
::= {dhcpv6RelayOpt38Entry 3}
dhcpv6RelayOpt38PortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure option 38 port ID. Only works when type is user-defined"
::= {dhcpv6RelayOpt38Entry 4}
-- The DHCPv6 Relay Option18
dhcpv6RelayOption18State OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCPv6 relay option 18 function is enabled or disabled."
::= { dhcpv6RelayOption18 1 }
dhcpv6RelayOption18CheckState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCPv6 relay option 18 Check function is enabled or disabled."
::= { dhcpv6RelayOption18 2 }
dhcpv6RelayOption18InterfaceIDType OBJECT-TYPE
SYNTAX INTEGER {
default(0),
cid(1),
vendor1(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of Interface ID."
::= { dhcpv6RelayOption18 3 }
-- -----------------------------------------------------------------
-- 1. MAC-based Access Control Settings
-- -----------------------------------------------------------------
macBasedCtrlGroup OBJECT IDENTIFIER ::= { companyMacAuthGroup 1 }
--------------------------------------------
macBasedCtrlState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MAC-based Access Control Global Settings."
::= { macBasedCtrlGroup 1 }
macBasedMethod OBJECT-TYPE
SYNTAX INTEGER {
radius(1),
local(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select MAC-based Access Control Methods."
DEFVAL { radius }
::= { macBasedCtrlGroup 2 }
macBasedRadiusPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the password about the method Mac-Based Authentication,
the maximum length are 32 chars."
::= { macBasedCtrlGroup 3 }
macBasedRadiusAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of Radius Authorization. "
::= { macBasedCtrlGroup 4 }
macBasedLocalAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of Local Authorization. "
::= { macBasedCtrlGroup 5 }
macBasedTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of Trap of MAC-based Authorization."
::= { macBasedCtrlGroup 6 }
macBasedLogStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { macBasedCtrlGroup 7 }
macBasedMaxUsr OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { 128 }
::= { macBasedCtrlGroup 8 }
macBasedPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacBasedPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { macBasedCtrlGroup 11 }
macBasedPortCtrlEntry OBJECT-TYPE
SYNTAX MacBasedPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { macBasedPortCtrlIndex }
::= { macBasedPortCtrlTable 1 }
MacBasedPortCtrlEntry ::=
SEQUENCE {
macBasedPortCtrlIndex Integer32,
macBasedPortCtrlState INTEGER,
macBasedPortCtrlAgingTime Integer32,
macBasedPortCtrlBlockTime Integer32
}
macBasedPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedPortCtrlEntry 1 }
macBasedPortCtrlState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { macBasedPortCtrlEntry 2 }
macBasedPortCtrlAgingTime OBJECT-TYPE
SYNTAX Integer32 (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { macBasedPortCtrlEntry 3 }
macBasedPortCtrlBlockTime OBJECT-TYPE
SYNTAX Integer32 (0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { macBasedPortCtrlEntry 4 }
-- -----------------------------------------------------------------
-- 2. MAC-based Access Control Local Settings
-- -----------------------------------------------------------------
macBasedCtrlLocalGroup OBJECT IDENTIFIER ::= { companyMacAuthGroup 2 }
--------------------------------------------
macBasedCtrlLocalTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacBasedCtrlLocalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { macBasedCtrlLocalGroup 1 }
macBasedCtrlLocalEntry OBJECT-TYPE
SYNTAX MacBasedCtrlLocalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { macBasedCtrlLocalMacAddress, macBasedCtrlLocalVID }
::= { macBasedCtrlLocalTable 1 }
MacBasedCtrlLocalEntry ::=
SEQUENCE {
macBasedCtrlLocalMacAddress MacAddress,
macBasedCtrlLocalVID INTEGER,
macBasedCtrlLocalVlanName SnmpAdminString,
macBasedCtrlLocalRowStatus RowStatus
}
macBasedCtrlLocalMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MacAddress of the MAC-based Access Control Local Setting Table."
::= { macBasedCtrlLocalEntry 1 }
macBasedCtrlLocalVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the MAC-based Access Control Local Setting entry."
::= { macBasedCtrlLocalEntry 2 }
macBasedCtrlLocalVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the VLAN."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { macBasedCtrlLocalEntry 3 }
macBasedCtrlLocalRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Row status of an entry in the MAC-based Access Control Local Setting Table.
Only a subset of the rowstatus variables (active, createAndGo, destroy) are available"
::= { macBasedCtrlLocalEntry 4 }
-- -----------------------------------------------------------------
-- 3. MAC-based Access Control Authentication State
-- -----------------------------------------------------------------
macBasedCtrlAuthGroup OBJECT IDENTIFIER ::= { companyMacAuthGroup 3 }
--------------------------------------------
macBasedCtrlAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacBasedCtrlAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthGroup 1 }
macBasedCtrlAuthEntry OBJECT-TYPE
SYNTAX MacBasedCtrlAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { macBasedCtrlAuthPort, macBasedCtrlAuthMacAddress, macBasedCtrlAuthRxVID }
::= { macBasedCtrlAuthTable 1 }
MacBasedCtrlAuthEntry ::=
SEQUENCE {
macBasedCtrlAuthPort Integer32,
macBasedCtrlAuthMacAddress MacAddress,
macBasedCtrlAuthRxVID INTEGER,
macBasedCtrlAuthState INTEGER,
macBasedCtrlAuthVID INTEGER,
macBasedCtrlAuthPriority INTEGER,
macBasedCtrlAuthAgingTime INTEGER,
macBasedCtrlAuthBlockTime INTEGER
}
macBasedCtrlAuthPort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For all machines give maximum port number."
::= { macBasedCtrlAuthEntry 1 }
macBasedCtrlAuthMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MacAddress of the MAC-based Access Control Authentication State Table."
::= { macBasedCtrlAuthEntry 2 }
macBasedCtrlAuthRxVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthEntry 3 }
macBasedCtrlAuthState OBJECT-TYPE
SYNTAX INTEGER {
authenticating(1),
authenticated(2),
blocked(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthEntry 4 }
macBasedCtrlAuthVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthEntry 5 }
macBasedCtrlAuthPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthEntry 6 }
macBasedCtrlAuthAgingTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthEntry 7 }
macBasedCtrlAuthBlockTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { macBasedCtrlAuthEntry 8 }
-- -------------------------------------------------------------
-- groups in the WAC Global Setting Auth MIB
-- -------------------------------------------------------------
wacAuthCtrl OBJECT IDENTIFIER ::= { companyWACAuthGroup 1 }
-- -----------------------------------------------------------------------------
-- wacAuthCtrl
-- -----------------------------------------------------------------------------
wacStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable WAC Global Settings"
::= { wacAuthCtrl 1 }
wacVirtualIPv4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Virtual IPv4"
::= { wacAuthCtrl 2 }
wacVirtualIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Virtual IPv6"
::= { wacAuthCtrl 3 }
wacRedirPath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redirection Path"
::= { wacAuthCtrl 4 }
wacClrRedirPath OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"yes/no WAC Clear Redirection path Settings"
::= { wacAuthCtrl 5 }
wacRadiusAuth OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable WAC RADIUS AUTH Settings"
::= { wacAuthCtrl 6 }
waclocalAuth OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable WAC LOCAL AUTH Settings"
::= { wacAuthCtrl 7 }
wacAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
radius(1),
local(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable WAC Auth Method Settings"
::= { wacAuthCtrl 8 }
wacAuthPortMethod OBJECT-TYPE
SYNTAX INTEGER {
http(1),
https(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authorization Port Method"
::= { wacAuthCtrl 9 }
wacAuthPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"HTTP(s) Port."
::= { wacAuthCtrl 10 }
-- -------------------------------------------------------------
-- groups in the User Settings Control MIB
-- -------------------------------------------------------------
wacUsrCtrl OBJECT IDENTIFIER ::= { companyWACAuthGroup 2 }
-- -----------------------------------------------------------------------------
-- wacUsrCtrl
-- -----------------------------------------------------------------------------
wacUsrCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF WACUsrCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { wacUsrCtrl 1 }
wacUsrCtrlEntry OBJECT-TYPE
SYNTAX WACUsrCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { authUserName }
::= { wacUsrCtrlTable 1 }
WACUsrCtrlEntry ::= SEQUENCE {
authUserName SnmpAdminString,
authUserVID INTEGER,
authUserPassword DisplayString,
authUserStatus RowStatus
}
authUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table.
This object is used to set 802.1X Local user name,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { wacUsrCtrlEntry 1 }
authUserVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of VLAN that you want this interface to be in.
It must be a exist vlan id."
::= { wacUsrCtrlEntry 2 }
authUserPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Local user Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { wacUsrCtrlEntry 3 }
authUserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the swAuthUserTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The swAuthUserName objects must be
explicitly set."
::= { wacUsrCtrlEntry 4 }
-- -------------------------------------------------------------
-- groups in the Port Settings Control MIB
-- -------------------------------------------------------------
wacPortCtrl OBJECT IDENTIFIER ::= { companyWACAuthGroup 3 }
-- -----------------------------------------------------------------------------
-- wacPortCtrl
-- -----------------------------------------------------------------------------
-- Port Control Table
wacPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF WACPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { wacPortCtrl 1 }
wacPortCtrlEntry OBJECT-TYPE
SYNTAX WACPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { wacPortCtrlIndex }
::= { wacPortCtrlTable 1 }
WACPortCtrlEntry ::=
SEQUENCE {
wacPortCtrlIndex
Integer32,
wacPortCtrlState
INTEGER,
wacPortCtrlAgetime
INTEGER,
wacPortCtrlBlocktime
INTEGER
}
wacPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { wacPortCtrlEntry 1 }
wacPortCtrlState OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface."
::= { wacPortCtrlEntry 2 }
wacPortCtrlAgetime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aging time"
::= { wacPortCtrlEntry 3 }
wacPortCtrlBlocktime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aging time"
::= { wacPortCtrlEntry 4 }
-- -------------------------------------------------------------
-- groups in the Authentication State Control MIB
-- -------------------------------------------------------------
wacAuthState OBJECT IDENTIFIER ::= { companyWACAuthGroup 4 }
-- -----------------------------------------------------------------------------
-- wacAuthState for IPv4(and IPv6)
-- -----------------------------------------------------------------------------
wacAuthStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF WACAuthStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Auth States"
::= { wacAuthState 1 }
wacAuthStateEntry OBJECT-TYPE
SYNTAX WACAuthStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Auth State entry containing the mac and forwarding port."
INDEX {wacAuthStatePort, wacAuthStateMac, wacAuthStateRXVID}
::= { wacAuthStateTable 1 }
WACAuthStateEntry ::= SEQUENCE {
wacAuthStatePort INTEGER,
wacAuthStateMac MacAddress,
wacAuthStateRXVID INTEGER,
wacAuthStateflag INTEGER,
wacAuthStateVID INTEGER,
wacAuthAssignPriority INTEGER,
wacAuthStateAgetime INTEGER,
wacAuthStateRowStatus RowStatus
}
wacAuthStatePort OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth port state of the Auth State entry.
For all machines give maximum port number."
::= { wacAuthStateEntry 1 }
wacAuthStateMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth state mac of the Auth State entry."
::= { wacAuthStateEntry 2 }
wacAuthStateRXVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rx VID of the Auth State entry."
::= { wacAuthStateEntry 3 }
wacAuthStateflag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth state flag of the Auth State entry."
::= { wacAuthStateEntry 4 }
wacAuthStateVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth state VID of the Auth State entry."
::= { wacAuthStateEntry 5 }
wacAuthAssignPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth assign priority of the Auth State entry."
::= { wacAuthStateEntry 6 }
wacAuthStateAgetime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth state age time of the Auth State entry."
::= { wacAuthStateEntry 7 }
wacAuthStateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auth state row status."
::= { wacAuthStateEntry 99 }
-- ----------------------------------------------------------------------------
-- The Vlan Mac Map Table
-- ----------------------------------------------------------------------------
macBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information on Vlan-MAC address
mapping."
::= { companyMacBasedVlan 1 }
macBasedVlanEntry OBJECT-TYPE
SYNTAX MacBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-MAC address mapping."
INDEX { vlanMacMapIndex }
::= { macBasedVlanTable 1 }
MacBasedVlanEntry ::=
SEQUENCE {
vlanMacMapIndex
Integer32,
vlanMacMapAddr
MacAddress,
vlanMacMapAddrMask
MacAddress,
vlanMacMapVid
VlanIndex,
vlanMacStatus
DisplayString,
vlanMacType
DisplayString,
vlanMacMapRowStatus
RowStatus
}
vlanMacMapIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of cmMacBasedVlanEntry. This object indicates the mac vlan entry for which
the configurations in cmMacBasedVlanEntry is to be done."
::= { macBasedVlanEntry 1 }
vlanMacMapAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac address for which the Vlan mapping is present in the entry."
::= { macBasedVlanEntry 2 }
vlanMacMapAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac address for which the Vlan mapping is present in the entry."
::= { macBasedVlanEntry 3 }
vlanMacMapVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the mac address of this entry is mapped to."
::= { macBasedVlanEntry 4 }
vlanMacStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status given to the mac-vlan entry."
::= { macBasedVlanEntry 5 }
vlanMacType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type given to the mac-vlan entry."
::= { macBasedVlanEntry 6 }
vlanMacMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { macBasedVlanEntry 99 }
macBasedVlanMethod OBJECT-TYPE
SYNTAX INTEGER {
single(1),
range(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A method of Vlan-MAC address mapping."
::= { companyMacBasedVlan 2 }
-- ----------------------------------------------------------
-- The sfpVendorInfoTable
-- ----------------------------------------------------------
sfpVendorInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpVendorInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (relay) DHCP packets to."
::= { companySfpVendorInfo 1 }
sfpVendorInfoEntry OBJECT-TYPE
SYNTAX SfpVendorInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (relay) DHCP packets to."
INDEX { sfpPortIndex }
::= { sfpVendorInfoTable 1 }
SfpVendorInfoEntry ::=
SEQUENCE {
sfpPortIndex
Integer32,
sfpConnectorType
DisplayString,
sfpTranceiverCode
DisplayString,
sfpBaudRate
DisplayString,
sfpVendorName
DisplayString,
sfpVendorOui
DisplayString,
sfpVendorPn
DisplayString,
sfpVendorRev
DisplayString,
sfpWavelength
DisplayString,
sfpVendorSn
DisplayString,
sfpDateCode
DisplayString
}
sfpPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available of index for fiber ports."
::= { sfpVendorInfoEntry 1 }
sfpConnectorType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 2}
sfpTranceiverCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 3}
sfpBaudRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 4}
sfpVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 5}
sfpVendorOui OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 6}
sfpVendorPn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 7}
sfpVendorRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 8}
sfpWavelength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 9}
sfpVendorSn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 10}
sfpDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {sfpVendorInfoEntry 11}
-- --------------------------------------------------------------------------
ddmCtrl OBJECT IDENTIFIER ::={companyDDM 1}
ddmInfo OBJECT IDENTIFIER ::={companyDDM 2}
-- --------------------------------------------------------------------------
-- DdmCtrl
-- --------------------------------------------------------------------------
ddmPowerUnit OBJECT-TYPE
SYNTAX INTEGER {
mw(0),
dbm(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the TX/RX power global unit."
DEFVAL{mw}
::= {ddmCtrl 1}
--ddmActionMgmt
ddmActionMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF DdmActionMgmtEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table contains the configuration of the action taken
when any parameter exceeds its threshold."
::= {ddmCtrl 2}
ddmActionMgmtEntry OBJECT-TYPE
SYNTAX DdmActionMgmtEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This is an entry of the swDdmConfigActionTable."
INDEX {ddmActionPort }
::= {ddmActionMgmtTable 1}
DdmActionMgmtEntry ::=
SEQUENCE {
ddmActionPort
INTEGER,
ddmActionState
INTEGER,
ddmActionShutdown
INTEGER
}
ddmActionPort OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port.
The available of index for fiber ports."
::= {ddmActionMgmtEntry 1}
ddmActionState OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the action type."
::= {ddmActionMgmtEntry 2}
ddmActionShutdown OBJECT-TYPE
SYNTAX INTEGER {
none(0),
alarm(1),
warning(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the action type."
::= {ddmActionMgmtEntry 3}
--ddmThresholdMgmt
ddmThresholdMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF DdmThresholdMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains DDM temperature configuration information."
::= {ddmCtrl 3}
ddmThresholdMgmtEntry OBJECT-TYPE
SYNTAX DdmThresholdMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry of the swDdmConfigThresholdTable."
INDEX {ddmThresholdPort ,ddmThresholdType}
::= {ddmThresholdMgmtTable 1}
DdmThresholdMgmtEntry ::=
SEQUENCE {
ddmThresholdPort
INTEGER,
ddmThresholdType
INTEGER,
ddmHighAlarm
DisplayString,
ddmLowAlarm
DisplayString,
ddmHighWarning
DisplayString,
ddmLowWarning
DisplayString
}
ddmThresholdPort OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port.
The available of index for fiber ports."
::= {ddmThresholdMgmtEntry 1}
ddmThresholdType OBJECT-TYPE
SYNTAX INTEGER{
temperature(0),
voltage(1),
bias(2),
txPower(3),
rxPower(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the threshold type."
::= {ddmThresholdMgmtEntry 2}
ddmHighAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the high alarm threshold value to be configured. As the
value is a floating point data type, the DisplayString type is used to define this parameter."
::= {ddmThresholdMgmtEntry 3}
ddmLowAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the low alarm threshold value to be configured. As the
value is a floating data type, the DisplayString type is used to define this parameter."
::= {ddmThresholdMgmtEntry 4}
ddmHighWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the high warning threshold value to be configured. As
the value is a floating data type, the DisplayString type is used to define this parameter."
::= {ddmThresholdMgmtEntry 5}
ddmLowWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the low warning threshold value to be configured. As
the value is a floating data type, the DisplayString type is used to define this parameter."
::= {ddmThresholdMgmtEntry 6}
-- --------------------------------------------------------------------------
-- DdmInfo
-- --------------------------------------------------------------------------
ddmStatus OBJECT IDENTIFIER ::= { ddmInfo 1 }
--DdmStatus
ddmStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DdmStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the DDM status information."
::= {ddmStatus 1}
ddmStatusEntry OBJECT-TYPE
SYNTAX DdmStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry of the ddmStatusTable."
INDEX {ddmStatusPort}
::= {ddmStatusTable 1}
DdmStatusEntry ::=
SEQUENCE {
ddmStatusPort
INTEGER,
ddmTemperature
DisplayString,
ddmVoltage
DisplayString,
ddmBiasCurrent
DisplayString,
ddmTxPower
DisplayString,
ddmRxPower
DisplayString
}
ddmStatusPort OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port.
The available of index for fiber ports."
::= {ddmStatusEntry 1}
ddmTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the real time value of the temperature. As the value
is a floating point data type, the DisplayString type is used to define this parameter."
::= {ddmStatusEntry 2}
ddmVoltage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the real time value of the supply voltage. As the value
value is a floating point data type, the DisplayString type is used to define this parameter."
::= {ddmStatusEntry 3}
ddmBiasCurrent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the real time value of the tx bias."
::= {ddmStatusEntry 4}
ddmTxPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the real time value of the tx power. As the value
is a floating point data type, the DisplayString type is used to define this parameter."
::= {ddmStatusEntry 5}
ddmRxPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the real time value of the rx power. As the value is
a floating data type, the DisplayString type is used to define this parameter."
::= {ddmStatusEntry 6}
-- -------------------------------------------------------------------------
-- companyFTPGroup
-- -------------------------------------------------------------------------
ftpFwTable OBJECT IDENTIFIER ::= { companyFTPGroup 1 }
ftpConfigTable OBJECT IDENTIFIER ::= { companyFTPGroup 2 }
ftpFwServerIpAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The FTP server's IPv4 address or IPv6 address is used to upload or
download firmware."
::= { ftpFwTable 1}
ftpFwImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Firmware file name used to upload or download firmware."
::= { ftpFwTable 2 }
ftpFwUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP username to login FTP."
::= { ftpFwTable 3}
ftpFwPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP password to login FTP."
::= { ftpFwTable 4 }
ftpFwPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP path can find file folder."
::= { ftpFwTable 5}
ftpFwPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP port to login FTP."
::= { ftpFwTable 6}
ftpFwImageID OBJECT-TYPE
SYNTAX INTEGER {
imageID1(1),
imageID2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fw image id can select imageid1 or imageid2 to flash"
::= { ftpFwTable 7 }
ftpFwFTPOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The FTP operates to perform downloading the firmware image
to the unit. This object is used in conjunction with FTP settings"
::= { ftpFwTable 8 }
ftpFwFTPOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The FTP operation status represent firmware backup or upgrade status."
::= { ftpFwTable 9 }
ftpConfigServerIpAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The FTP server's IPv4 address or IPv6 address is used to upload or
download firmware."
::= { ftpConfigTable 1 }
ftpConfigFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Config file name used to upload or download Config."
::= { ftpConfigTable 2}
ftpConfigUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP username to login FTP."
::= { ftpConfigTable 3}
ftpConfigPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP password to login FTP."
::= { ftpConfigTable 4}
ftpConfigPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP path can find file folder."
::= { ftpConfigTable 5}
ftpConfigPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"FTP port to login FTP."
::= { ftpConfigTable 6}
ftpConfigConfigID OBJECT-TYPE
SYNTAX INTEGER {
configID1(1),
configID2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config image id can select imageid1 or imageid2 to flash"
::= { ftpConfigTable 7 }
ftpConfigFTPOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The FTP operates to perform downloading the config image
to the unit. This object is used in conjunction with FTP settings"
::= { ftpConfigTable 8 }
ftpConfigFTPOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The FTP operation status represent config backup or upgrade status."
::= { ftpConfigTable 9}
erpsState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the ERPS state."
::= { companyERPSGroup 1 }
erpsLog OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the ERPS log."
::= { companyERPSGroup 2 }
erpsTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the ERPS trap."
::= { companyERPSGroup 3 }
erpsInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the ERPS configuration information."
::= { companyERPSGroup 4 }
erpsInfoEntry OBJECT-TYPE
SYNTAX ErpsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the ERPS configuration information."
INDEX { erpsRAPSVLANID}
::= { erpsInfoTable 1 }
ErpsInfoEntry ::=
SEQUENCE {
erpsRAPSVLANID
INTEGER,
erpsRingStatus
INTEGER,
erpsAdminWestPort
INTEGER,
erpsAdminWestPortState
INTEGER,
erpsAdminEastPort
INTEGER,
erpsAdminEastPortState
INTEGER,
erpsAdminRPLPort
INTEGER,
erpsRPLOwner
INTEGER,
erpsProtectedAddVlanList
OCTET STRING,
erpsProtectedDelVlanList
OCTET STRING,
erpsProtectedVlanList1k
OCTET STRING,
erpsProtectedVlanList2k
OCTET STRING,
erpsProtectedVlanList3k
OCTET STRING,
erpsProtectedVlanList4k
OCTET STRING,
erpsRingMEL
INTEGER,
erpsHoldoffTime
INTEGER,
erpsGuardTime
INTEGER,
erpsWTRTime
INTEGER,
erpsRevertive
INTEGER,
erpsCurrentRingState
INTEGER,
erpsRowStatus
RowStatus
}
erpsRAPSVLANID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RAPS VLAN is an index of the configuration."
::= { erpsInfoEntry 1 }
erpsRingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the administrative state of the ring."
::= { erpsInfoEntry 2 }
erpsAdminWestPort OBJECT-TYPE
SYNTAX INTEGER {
virtual_channle (-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates actual running ring west port.
The value 0 indicates the west port is a virtual channel."
::= { erpsInfoEntry 3 }
erpsAdminWestPortState OBJECT-TYPE
SYNTAX INTEGER {
fowarding(1),
blocking(2),
signal-fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the west port state. The state may change occasionally.
When the east port is configured on a virtual channel, the east
port state is always forwarding."
::= { erpsInfoEntry 4 }
erpsAdminEastPort OBJECT-TYPE
SYNTAX INTEGER {
virtual_channle (-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates actual running ring east port.
The value 0 indicates the east port is a virtual channel."
::= { erpsInfoEntry 5 }
erpsAdminEastPortState OBJECT-TYPE
SYNTAX INTEGER {
fowarding(1),
blocking(2),
signal-fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the east port state. The state may change occasionally.
When the east port is configured on a virtual channel, the east
port state is always forwarding."
::= { erpsInfoEntry 6 }
erpsAdminRPLPort OBJECT-TYPE
SYNTAX INTEGER {
none (0),
west (1),
east (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the port enable state is enabled, the RPL port's current
port role is defined by the ERPS application."
::= { erpsInfoEntry 7 }
erpsRPLOwner OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the RPL owner state.
The RPL owner is an Ethernet Ring Node adjacent to the RPL that
is responsible for blocking its end of the RPL under normal
conditions."
::= { erpsInfoEntry 8 }
erpsProtectedAddVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is add protect VLAN list"
::= { erpsInfoEntry 9}
erpsProtectedDelVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is delete protect VLAN list"
::= { erpsInfoEntry 10}
erpsProtectedVlanList1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this protected vlan,
the bit corresponding to that VLAN is set to '1'. "
::= { erpsInfoEntry 11}
erpsProtectedVlanList2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this protected vlan,
the bit corresponding to that VLAN is set to '1'."
::= { erpsInfoEntry 12}
erpsProtectedVlanList3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this protected vlan,
the bit corresponding to that VLAN is set to '1'."
::= { erpsInfoEntry 13}
erpsProtectedVlanList4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4094.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this protected vlan,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4094."
::= { erpsInfoEntry 14}
erpsRingMEL OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ring MEL is the maintenance entity group (MEG) level that
provides a communication channel for the ring automatic protection
switching (RAPS) information."
::= { erpsInfoEntry 15 }
erpsHoldoffTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In order to coordinate the timing of protection switches at multiple layers."
::= { erpsInfoEntry 16 }
erpsGuardTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to prevent ring nodes from receiving outdated RAPS messages."
::= { erpsInfoEntry 17 }
erpsWTRTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When revertive is enabled, this is used to prevent frequent
operation of the protection switch due to an intermittent defect.
A failed working transport entity must become stable in a fault-free state."
::= { erpsInfoEntry 18 }
erpsRevertive OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to enable or disable the revertive operation of a special
ring. When revertive is disabled, the traffic link is allowed to use the RPL,
after revovering from a failure. When revertive is enabled, the traffic
link is restored to the working transport link."
::= { erpsInfoEntry 19 }
erpsCurrentRingState OBJECT-TYPE
SYNTAX INTEGER {
deactivated (0),
idle (1),
protection (2),
manualswitch (3),
forcedswitch (4),
pending (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the state of the ring."
::= { erpsInfoEntry 20 }
erpsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the RowStatus of this entry."
::= { erpsInfoEntry 21}
erpsSubRingTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsSubRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the ERPS sub-ring configuration information."
::= { companyERPSGroup 5 }
erpsSubRingEntry OBJECT-TYPE
SYNTAX ErpsSubRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the ERPS sub-ring configuration information."
INDEX {erpsSubRingRAPSVLANID, erpsSubRingVlanID}
::= { erpsSubRingTable 1 }
ErpsSubRingEntry ::=
SEQUENCE {
erpsSubRingRAPSVLANID
INTEGER,
erpsSubRingVlanID
INTEGER,
erpsSubRingTCPropagationState
INTEGER,
erpsSubRingRowStatus
RowStatus
}
erpsSubRingRAPSVLANID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RAPS VLAN is an index of the configuration."
::= { erpsSubRingEntry 1 }
erpsSubRingVlanID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the ring control VLAN-ID of the sub-ring which
connects to another ring."
::= { erpsSubRingEntry 2}
erpsSubRingTCPropagationState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the state of the sub-ring topology change propagation."
::= { erpsSubRingEntry 3 }
erpsSubRingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { erpsSubRingEntry 4 }
-- ----------------------------------------------------------
-- The companyLedPanel Groups
-- ----------------------------------------------------------
swLedPanelstate OBJECT IDENTIFIER ::= { companyswLedPanel 1 }
swLedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwLedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the LED information."
::= { swLedPanelstate 1 }
swLedInfoEntry OBJECT-TYPE
SYNTAX SwLedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of front panel LED information for each unit in the system."
INDEX { swLedInfoUnitId }
::= { swLedInfoTable 1 }
SwLedInfoEntry ::=
SEQUENCE {
swLedInfoUnitId
INTEGER,
swLedInfoFrontPanelLedStatus
OCTET STRING
}
swLedInfoUnitId OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the unit ID."
::= { swLedInfoEntry 1 }
swLedInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indicators. The first 32 octets are
defined as next, and following octets are for logical port LED.
Octet 1 is console led:
0x01 = a user is login through console
0x02 = no user is login through console
Octet 2-32 are reserved."
::= { swLedInfoEntry 2 }
-- *****************************************************************
--
-- Enterprise Trap group
--
-- *****************************************************************
END
View Git Blame Copy Permalink