Observium_CE/mibs/d-link/DES7200-V1-TRAP

168 lines
5.8 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-- *****************************************************************
-- MY-V1-TRAP.mib: My Switch SNMPv1 Trap MIB
--
-- $Copyright$
--
-- *****************************************************************
--
DES7200-V1-TRAP DEFINITIONS ::= BEGIN
IMPORTS
myMacNotiHisMacChangedMsg
FROM DES7200-ADDRESS-MIB
mySystemHardChangeDesc
FROM DES7200-SYSTEM-MIB
stormViolationAlarmType
FROM DES7200-TRAFFIC-CTRL-MIB
mySystemHwPower,mySystemHwFan
FROM DES7200-SYSTEM-MIB
lineDetectStatus,lineDetectPosition
FROM DES7200-INTERFACE-MIB
myModules
FROM DES7200-SMI;
--
-- snmpv1-trap definitions
--
sysHardChangeDetected TRAP-TYPE
ENTERPRISE switch
VARIABLES { mySystemHardChangeDesc }
DESCRIPTION
"System hardware has changed include number of devices or number of modules
or the place or type of the module is change."
::= 1
portSecurityViolate TRAP-TYPE
ENTERPRISE switch
VARIABLES { ifIndex }
DESCRIPTION
"the port security violate trap indicates that port security rule
is violated when port security of this port is opened."
::= 2
stormViolationAlarm TRAP-TYPE
ENTERPRISE switch
VARIABLES { ifIndex,stormViolationAlarmType}
DESCRIPTION
"while the storm threshold has been set, if more broadcast
is send to the port, then this trap will be sent."
::= 3
macNotification TRAP-TYPE
ENTERPRISE switch
VARIABLES { myMacNotiHisMacChangedMsg }
DESCRIPTION
"This notification is generated when there is enough MAC
address information to fully occupy a maximum size SNMP trap
message. This notification is also generated when there
is at least one MAC address changed or removed and the amount
of time elapsed from the previous notification is greater
than the maximum wait time denoted by myMacNotificationInterval object.
If there are more MAC addresses information than can fit into
one myMacNotiHisMacChangedMsg object, then multiple notifications
will be generated."
::= 4
powerStateChange TRAP-TYPE
ENTERPRISE switch
VARIABLES { mySystemHwPower}
DESCRIPTION
"while the state of power changed, then this trap will be sent."
::= 5
fanStateChange TRAP-TYPE
ENTERPRISE switch
VARIABLES { mySystemHwFan}
DESCRIPTION
"while the state of fan changed, then this trap will be sent."
::= 6
pimNeighborLoss TRAP-TYPE
ENTERPRISE switch
VARIABLES {ifIndex }
DESCRIPTION
"A pimNeighborLoss trap signifies the loss of an adjacency
with a neighbor. This trap should be generated when the
neighbor timer expires, and the router has no other
neighbors on the same interface with a lower IP address than
itself."
::= 7
igmpVersionConflicted TRAP-TYPE
ENTERPRISE switch
VARIABLES {myIgmpInterfaceIfIndex,
myIgmpInterfaceVersion,
myIgmpInterfaceHostVersion }
DESCRIPTION
"A igmpVersionErr trap signifies version is
different in the interface with host.This trap
should be generated when interface run version
IGMPV1 and reported by host which run version IGMPV2.
also when interface run version IGMPV2 and reported
by host which run version IGMPV1."
::= 8
dvmrpRouteInformation TRAP-TYPE
ENTERPRISE switch
DESCRIPTION
"A dvmrpRouteInformation trap signifies the
Number of routes is more than The limit of
myDvmrpRoutehogNotification in one minute,
then the trap should be generated."
::= 9
entityNotification TRAP-TYPE
ENTERPRISE switch
VARIABLES { myEntityStateChgDesc}
DESCRIPTION
"while the state of entity changed or some failure happened, this trap will be sent."
::= 10
clusterMemberStateChange TRAP-TYPE
ENTERPRISE switch
VARIABLES {scMemberOperStatus}
DESCRIPTION
"while the state of member switch changed, then this trap will be sent.
either state of member switch change from active to inactive or from
inactive to active."
::= 11
temperatureWarning TRAP-TYPE
ENTERPRISE switch
VARIABLES { myTemperatureWarningDesc }
DESCRIPTION
"while the temperature of one of modules reach warning temperature, then this trap will be sent."
::= 12
lineDetect TRAP-TYPE
ENTERPRISE switch
VARIABLES { ifIndex, lineDetectStatus,lineDetectPosition }
DESCRIPTION
"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>³<EFBFBD><C2B3>ֶ<EFBFBD>·<EFBFBD><C2B7><EFBFBD>߶<EFBFBD>·<EFBFBD><C2B7><EFBFBD><EFBFBD><E2A3AC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>´Ӷ<C2B4>·<EFBFBD><C2B7><EFBFBD><EFBFBD>
<20><>·״̬<D7B4>лָ<D0BB><D6B8><EFBFBD><EFBFBD><EFBFBD>ʱ֪ͨ."
::= 13
smpFrameRelay TRAP-TYPE
ENTERPRISE switch
VARIABLES {mySMPSwitchIP,mySMPSwitchInterfaceID,mySMPSwitchInterfaceVLANID,
mySMPFrameContentLength,mySMPFrameContent}
DESCRIPTION
"Trap<61><70>Ϣ<EFBFBD><CFA2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݣ<EFBFBD><DDA3><EFBFBD><EFBFBD>յ<EFBFBD>ָ<EFBFBD><D6B8><EFBFBD><EFBFBD><EFBFBD>ĵĽ<C4B5><C4BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>IP,
<20><><EFBFBD>ձ<EFBFBD><D5B1>ĵĶ˿<C4B6>,<2C><><EFBFBD>ĵij<C4B5><C4B3><EFBFBD><EFBFBD>Լ<EFBFBD><D4BC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϣ"
::= 14
smpArpAttack TRAP-TYPE
ENTERPRISE switch
VARIABLES { mySMPArpAttackSubnetIP, mySMPArpAttackSubnetIPNum, mySMPArpAttackInterfaceSlot,
mySMPArpAttackInterfacePort, mySMPArpAttackInterfaceVlanID, mySMPArpAttackFrameContent,
mySMPArpAttackStatus, mySMPArpAttackCriticalStatus, mySMPArpAttackMac,
mySMPArpAttackInterfaceIndex }
DESCRIPTION
"<22><><EFBFBD>⵽ARP<52><50><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>SMP<4D><50><EFBFBD>;<EFBFBD><CDBE><EFBFBD>."
::= 15
END