2389 lines
82 KiB
Plaintext
2389 lines
82 KiB
Plaintext
-- -----------------------------------------------------------------------------
|
|
-- DES-3810-28-L2MGMT-MIB
|
|
-- ------------------------------------------------------------------------------
|
|
-- Version 1.07, 2009/09/25, Carl Zeng
|
|
-- 2009/09/25
|
|
-- Add object swL2DhcpLocalRelayMgmt
|
|
-- -----------------------------------------------------------------------------
|
|
-- Version 1.06, 2009/09/18, Rechird zhu
|
|
-- 2009/09/18
|
|
-- add port security trap
|
|
-- ------------------------------------------------------------------------------
|
|
-- Version 1.05, 2009/09/10, Phoenix Xie
|
|
-- 2009/09/10
|
|
-- modify object swL2MulticastFilterVlanMode, not support forward_all_groups
|
|
-- -----------------------------------------------------------------------------
|
|
-- Version 1.04, 2009/08/21, Sprind Xiong
|
|
-- 2009/08/21
|
|
-- remove object swL2DevCtrlStpState
|
|
-- -----------------------------------------------------------------------------
|
|
-- Version 1.03
|
|
-- 2009/08/25
|
|
-- Requset By LiangFeng for project DES3810.
|
|
-- 2009/08/25
|
|
-- Add ddm, and bpdu_protection SYNTX for swL2PortErrPortReason.
|
|
-- -----------------------------------------------------------------------------
|
|
-- Version 1.02
|
|
-- 2009/05/24
|
|
-- Requset By LiangFeng for project DES3810, portping from project DGS3700, and according with format of project DGS3700.
|
|
-- 2009/06/02
|
|
-- remove LBD mib to LBD.mib
|
|
-- ------------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
-- Version 1.01, 2009/06/10, Tom Jin
|
|
-- 2009/06/10
|
|
-- add object swL2TrunkVLANTable in swL2TrunkMgmt
|
|
-- add object swL2DevCtrlVLANTrunkState in swL2DevCtrl
|
|
-- Requested by Tom for project DES3810.
|
|
-- remove LBD mib to LBD.mib
|
|
-- ------------------------------------------------------------------------------
|
|
|
|
DES3810-28-L2MGMT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress , TimeTicks , Integer32, Unsigned32,
|
|
MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI
|
|
DisplayString,RowStatus,TruthValue FROM SNMPv2-TC
|
|
--PortList FROM Q-BRIDGE-MIB
|
|
AgentNotifyLevel FROM DLINK-ID-REC-MIB
|
|
des3810-28 FROM SW3810PRIMGMT-MIB
|
|
swPortSecPortIndex FROM PORT-SECURITY-MIB;
|
|
|
|
swL2MgmtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "0803100000Z"
|
|
ORGANIZATION "D-Link Corp."
|
|
CONTACT-INFO
|
|
"http://support.dlink.com"
|
|
DESCRIPTION
|
|
"The Structure of Layer 2 Network Management Information."
|
|
::= { des3810-28 2 }
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
|
|
-- in the
|
|
-- "canonical"
|
|
-- order, copy from RFC1493
|
|
|
|
VlanId ::= INTEGER (1..4094)
|
|
PortList ::= OCTET STRING(SIZE (0..127))
|
|
Ipv6Address ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2x:"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used to model IPv6 addresses.
|
|
This is a binary string of 16 octets in network
|
|
byte-order."
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
|
|
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
|
|
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
-- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
|
|
-- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
|
|
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
|
|
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
|
|
swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
|
|
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
|
|
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
|
|
swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
|
|
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
|
|
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
|
|
swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
|
|
swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
|
|
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 }
|
|
|
|
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
|
|
|
|
|
|
swDevInfoTotalNumOfPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports within this switch. This value is the sum
|
|
of the ports within this switch."
|
|
::= { swL2DevInfo 1 }
|
|
|
|
swDevInfoNumOfPortInUse OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports in this switch connected to the segment or
|
|
the end stations."
|
|
::= { swL2DevInfo 2 }
|
|
|
|
swDevInfoFrontPanelLedStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a set of system LED indications.
|
|
|
|
The first six octets are defined as system LED. The first two
|
|
octets are currently unused and must be set to zero. The third
|
|
octet indicates the power LED. The fourth octet indicates the
|
|
console LED. The fifth LED is RPS (Redundancy Power Supply) LED.
|
|
The sixth LED is Master(Stacking Master Device) LED.
|
|
|
|
For the byte range form 7 to 8, it reflect the MGMT port.
|
|
Every two bytes are presented to a port.
|
|
|
|
For the byte range from 9 to 56, it reflect the 1~24FE ports.
|
|
Every two bytes are presented to a port.
|
|
|
|
For the byte range from 57 to 64, it reflect the 25~26GE Combol ports.
|
|
Every four bytes are presented to a port. The byte range from 57
|
|
to 60, it reflect copper ports. The byte range from 61 to 64, it
|
|
reflect fiber ports.
|
|
|
|
For the byte range from 65 to 72, it reflect the 27~28GE Combol ports.
|
|
Every four bytes are presented to a port. The byte range from 65
|
|
to 68, it reflect copper ports. The byte range from 69 to 72, it
|
|
reflect fiber ports.
|
|
|
|
Every two bytes are presented to a port. The first byte is presented
|
|
as the Link/Activity LED. The second byte is presented as the Speed LED.
|
|
|
|
Power LED:
|
|
01 = fail/error/non existence
|
|
02 = work normal
|
|
|
|
Console LED:
|
|
01 = Console LED OFF
|
|
02 = Console LED ON
|
|
|
|
RPS LED:
|
|
01 = RPS LED OFF
|
|
02 = RPS LED ON
|
|
|
|
Master LED:
|
|
01 = Master LED OFF
|
|
02 = Master LED ON
|
|
|
|
Link/Activity LED :
|
|
The most significant bit is used for blink/solid:
|
|
8 = The LED blinks.
|
|
|
|
The second most significant bit is used for link status:
|
|
1 = link fail.
|
|
2 = link pass.
|
|
|
|
Speed LED :
|
|
01 = 10Mbps.
|
|
02 = 100Mbps.
|
|
03 = 1000Mbps.
|
|
|
|
The remaining bytes are currently unused and must be 0."
|
|
::= { swL2DevInfo 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
|
|
|
|
|
|
swL2DevCtrlSnmpTrapState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the SNMP trap status."
|
|
::= { swL2DevCtrl 5 }
|
|
|
|
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the object is set to active, all statistical counters will
|
|
be cleared. If set to normal, no action."
|
|
::= { swL2DevCtrl 6 }
|
|
|
|
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN ID to which the Dot1dTpFdbTable belongs;
|
|
The default value is DEFAULT_VLAN_ID of the system."
|
|
::= { swL2DevCtrl 7 }
|
|
|
|
swL2MACNotifyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can enable or disable MAC Notification."
|
|
::= { swL2DevCtrl 8 }
|
|
|
|
swL2MACNotifyHistorySize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the history size of MAC addresses in the MAC Address table.
|
|
The default value is 1 ."
|
|
::= { swL2DevCtrl 9 }
|
|
|
|
swL2MACNotifyInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time interval, in seconds, which will trigger
|
|
MAC notification messages."
|
|
::= { swL2DevCtrl 10 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 }
|
|
|
|
swL2DevCtrlTelnetState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the Telnet status."
|
|
::= { swL2DevCtrlTelnet 1 }
|
|
|
|
swL2DevCtrlTelnetTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object designates TCP ports.
|
|
When Telnet is disabled, this object is not accessible."
|
|
::= { swL2DevCtrlTelnet 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
swL2DevCtrlManagementVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls which previously created VLANs are included
|
|
in the System IP Interface."
|
|
::= { swL2DevCtrl 16 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 17 }
|
|
|
|
swL2DevCtrlWebState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the Web status."
|
|
::= { swL2DevCtrlWeb 1 }
|
|
|
|
swL2DevCtrlWebTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object designates TCP ports.
|
|
When Web is disabled, this object is not accessible."
|
|
::= { swL2DevCtrlWeb 2 }
|
|
|
|
swL2DevCtrlLLDPState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the state of the LLDP function.
|
|
When this function is enabled, the switch can start to transmit
|
|
LLDP packets and receive and process the LLDP packets.
|
|
The specific function of each port will depend on the per port
|
|
LLDP setting.
|
|
For the advertisement of LLDP packets, the switch announces the
|
|
information to its neighbor through ports. For the receiving of
|
|
LLDP packets, the switch will learn the information from the LLDP
|
|
packets advertised from the neighbor in the neighbor table.
|
|
"
|
|
::= { swL2DevCtrl 18 }
|
|
|
|
swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When lldp is disabled and lldp forward_message is enabled, the received
|
|
LLDP Data Unit packets will be forwarded. "
|
|
DEFVAL {disabled}
|
|
::={swL2DevCtrl 19}
|
|
|
|
swL2DevCtrlIpAutoconfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the IP auto configuration state."
|
|
::= { swL2DevCtrl 20 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
swL2DevCtrlCFM OBJECT IDENTIFIER ::= { swL2DevCtrl 21 }
|
|
|
|
swL2DevCtrlCFMState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the CFM global state."
|
|
::={swL2DevCtrlCFM 1}
|
|
|
|
swL2DevCtrlCFMPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2DevCtrlCFMPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing CFM state of speicified ports."
|
|
::= { swL2DevCtrlCFM 2 }
|
|
|
|
swL2DevCtrlCFMPortEntry OBJECT-TYPE
|
|
SYNTAX SwL2DevCtrlCFMPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of CFM state on speicified ports."
|
|
INDEX { swL2DevCtrlCFMPortIndex }
|
|
::= { swL2DevCtrlCFMPortTable 1 }
|
|
|
|
SwL2DevCtrlCFMPortEntry ::=
|
|
SEQUENCE {
|
|
swL2DevCtrlCFMPortIndex
|
|
INTEGER,
|
|
swL2DevCtrlCFMPortState
|
|
INTEGER
|
|
|
|
}
|
|
|
|
swL2DevCtrlCFMPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port-num."
|
|
::= { swL2DevCtrlCFMPortEntry 1 }
|
|
|
|
swL2DevCtrlCFMPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the CFM state on per-port."
|
|
::= { swL2DevCtrlCFMPortEntry 2 }
|
|
|
|
swL2DevCtrlVLANTrunkState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the global state of the VLAN trunking feature of the device."
|
|
::={swL2DevCtrl 22}
|
|
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
|
|
|
|
swL2DevAlarmNewRoot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the device has become the new root of the Spanning Tree,
|
|
this object decides whether to send a new root trap."
|
|
::= { swL2DevAlarm 1 }
|
|
|
|
swL2DevAlarmTopologyChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines whether or not to send a trap message when
|
|
the switch topology changes. If the object is enabled(3), the topologyChange
|
|
trap is sent by the device when any of its configured ports transitions from
|
|
the Learning state to the Forwarding state, or from the Forwarding state to
|
|
the Blocking state. For the same port transition, the device does not send the
|
|
trap if this object value is disabled or other."
|
|
::= { swL2DevAlarm 2 }
|
|
|
|
swL2DevAlarmLinkChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines whether or not to send a trap message when the link
|
|
was changed. If the object is enabled(3), the Link Change trap is sent by
|
|
the device when any of its ports link change. The device does not send the
|
|
trap if this object value is disabled or other."
|
|
::= { swL2DevAlarm 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2VlanStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2VlanStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing static configuration information for
|
|
each VLAN configured into the device by (local or
|
|
network) management. All entries are permanent and will
|
|
be restored after the device is reset."
|
|
::= { swL2VLANMgmt 1 }
|
|
|
|
swL2VlanStaticEntry OBJECT-TYPE
|
|
SYNTAX SwL2VlanStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static information for a VLAN configured into the
|
|
device by (local or network) management."
|
|
INDEX { swL2VlanIndex }
|
|
::= { swL2VlanStaticTable 1 }
|
|
|
|
SwL2VlanStaticEntry ::=
|
|
SEQUENCE {
|
|
swL2VlanIndex
|
|
VlanId,
|
|
swL2VLANAdvertisement
|
|
INTEGER
|
|
|
|
}
|
|
|
|
swL2VlanIndex OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID or other identifier referring to this VLAN."
|
|
::= { swL2VlanStaticEntry 1 }
|
|
|
|
swL2VLANAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the advertisement is active or not."
|
|
::= { swL2VlanStaticEntry 2 }
|
|
|
|
swL2PVIDAutoAssignmentState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the PVID auto assigment state.
|
|
If 'Auto-assign PVID' is disabled, PVID can only be changed
|
|
by PVID configuration (user changes explicitly). The VLAN
|
|
configuration will not automatically change the PVID.
|
|
|
|
If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures
|
|
a port to VLAN X's untagged membership, this port's PVID
|
|
will be updated with VLAN X. Using the VLAN list command,
|
|
PVID is updated as the last item of the VLAN list. When a user removes
|
|
a port from the untagged membership of the PVID's VLAN, the
|
|
port's PVID will be assigned 'default VLAN'."
|
|
::= { swL2VLANMgmt 2 }
|
|
|
|
swL2VlanPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2VlanPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing vlan and port role information of each port."
|
|
::= { swL2VLANMgmt 3 }
|
|
|
|
swL2VlanPortInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2VlanPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry of vlan port information."
|
|
INDEX { swL2VlanPortInfoPortIndex,swL2VlanPortInfoVid }
|
|
::= { swL2VlanPortInfoTable 1 }
|
|
|
|
SwL2VlanPortInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2VlanPortInfoPortIndex
|
|
INTEGER,
|
|
swL2VlanPortInfoVid
|
|
INTEGER,
|
|
swL2VlanPortInfoPortRole
|
|
INTEGER
|
|
}
|
|
swL2VlanPortInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { swL2VlanPortInfoEntry 1 }
|
|
|
|
swL2VlanPortInfoVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID assigned to a special port"
|
|
::= { swL2VlanPortInfoEntry 2 }
|
|
|
|
swL2VlanPortInfoPortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
untagged(2),
|
|
tagged(3),
|
|
dynamic(4),
|
|
forbidden(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port role of a special port.when none,it means this port is not belong to the vlan."
|
|
::= { swL2VlanPortInfoEntry 3 }
|
|
|
|
swL2NniGvrpBpduAddress OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1d(1),
|
|
dot1ad(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the GVRP's BPDU MAC address of NNI port In Q-in_Q status."
|
|
::= { swL2VLANMgmt 7 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2PortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port."
|
|
::= { swL2PortMgmt 1 }
|
|
|
|
swL2PortInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port of the device."
|
|
INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType }
|
|
::= { swL2PortInfoTable 1 }
|
|
|
|
SwL2PortInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2PortInfoPortIndex
|
|
INTEGER,
|
|
swL2PortInfoMediumType
|
|
INTEGER,
|
|
swL2PortInfoUnitID
|
|
INTEGER,
|
|
swL2PortInfoType
|
|
INTEGER,
|
|
swL2PortInfoLinkStatus
|
|
INTEGER,
|
|
swL2PortInfoNwayStatus
|
|
INTEGER,
|
|
-- swL2PortInfoModuleType
|
|
-- INTEGER,
|
|
swL2PortInfoErrorDisabled
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortInfoEntry 1 }
|
|
|
|
swL2PortInfoMediumType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
copper(1),
|
|
fiber(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates medium type of the port number."
|
|
::={swL2PortInfoEntry 2}
|
|
|
|
swL2PortInfoUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ID of the unit in the system"
|
|
::= { swL2PortInfoEntry 3 }
|
|
|
|
swL2PortInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portType-none(0),
|
|
portType-100Base-T(2),
|
|
portType-100Base-X(3),
|
|
portType-1000Base-T(4),
|
|
portType-1000Base-X(5),
|
|
portType-10GBase-R(6),
|
|
portType-10GBase-CX4(7),
|
|
portType-SIO(8),
|
|
portType-module-empty(9),
|
|
portType-user-last(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the connector type of this port."
|
|
::= { swL2PortInfoEntry 4 }
|
|
|
|
swL2PortInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
link-pass(2),
|
|
link-fail(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port link status."
|
|
::= { swL2PortInfoEntry 5 }
|
|
|
|
swL2PortInfoNwayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
link-down(0),
|
|
full-10Mbps-8023x(1),
|
|
full-10Mbps-none(2),
|
|
half-10Mbps-backp(3),
|
|
half-10Mbps-none(4),
|
|
full-100Mbps-8023x(5),
|
|
full-100Mbps-none(6),
|
|
half-100Mbps-backp(7),
|
|
half-100Mbps-none(8),
|
|
full-1Gigabps-8023x(9),
|
|
full-1Gigabps-none(10),
|
|
half-1Gigabps-backp(11),
|
|
half-1Gigabps-none(12),
|
|
full-10Gigabps-8023x(13),
|
|
full-10Gigabps-none(14),
|
|
half-10Gigabps-8023x(15),
|
|
half-10Gigabps-none(16),
|
|
empty(17),
|
|
err-disabled(18)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port speed and duplex mode."
|
|
::= { swL2PortInfoEntry 6 }
|
|
|
|
-- swL2PortInfoModuleType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- none(0),
|
|
-- moduleType-COMBO(1),
|
|
-- moduleType-1394(2),
|
|
-- moduleType-1000T(3),
|
|
-- moduleType-MGBIC(4),
|
|
-- moduleType-1P-SC-SX(5),
|
|
-- moduleType-2P-SC-SX(6),
|
|
-- moduleType-1P-SC-LX(7),
|
|
-- moduleType-2P-SC-LX(8),
|
|
-- moduleType-1P-TX(9),
|
|
-- moduleType-2P-TX(10),
|
|
-- moduleType-1P-MTRJ-SX(11),
|
|
-- moduleType-2P-MTRJ-SX(12),
|
|
-- moduleType-1P-MTRJ-LX(13),
|
|
-- moduleType-2P-MTRJ-LX(14),
|
|
-- moduleType-1P-GBIC(15),
|
|
-- moduleType-2P-GBIC(16),
|
|
-- moduleType-1P-GBIC-1P-TX(17),
|
|
-- moduleType-1P-GBIC-1P-STACK(18),
|
|
-- moduleType-2P-STACK(19),
|
|
-- moduleType-2P-100FX(20),
|
|
-- moduleType-1P-100FX(21),
|
|
-- moduleType-2P-100FX-NEW(22),
|
|
-- moduleType-1P-100FL(23),
|
|
-- moduleType-2P-100FL(24),
|
|
-- moduleType-2P-100TX(25),
|
|
-- moduleType-BaseModule-24PORT(26)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the module type of this port."
|
|
-- ::= { swL2PortInfoEntry 7 }
|
|
|
|
swL2PortInfoErrorDisabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
storm(1),
|
|
-- stp-lbd(2),
|
|
unknow(3),
|
|
ctp-lbd(4),
|
|
ddm(5),
|
|
bpdu_protection(6),
|
|
power-saving(7)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the blocking type of this port."
|
|
::= { swL2PortInfoEntry 8 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2PortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains control information about every port."
|
|
::= { swL2PortMgmt 2 }
|
|
|
|
swL2PortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of control information for each port of the device."
|
|
INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType}
|
|
::= { swL2PortCtrlTable 1 }
|
|
|
|
SwL2PortCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortCtrlPortIndex
|
|
INTEGER,
|
|
swL2PortCtrlMediumType
|
|
INTEGER,
|
|
swL2PortCtrlUnitIndex
|
|
INTEGER,
|
|
swL2PortCtrlAdminState
|
|
INTEGER,
|
|
swL2PortCtrlNwayState
|
|
INTEGER,
|
|
swL2PortCtrlFlowCtrlState
|
|
INTEGER,
|
|
swL2PortCtrlLearningState
|
|
INTEGER,
|
|
swL2PortCtrlMACNotifyState
|
|
INTEGER,
|
|
-- swL2PortCtrlMulticastfilter
|
|
-- INTEGER
|
|
swL2PortCtrlMDIXState
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortCtrlEntry 1 }
|
|
|
|
swL2PortCtrlMediumType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
copper(1),
|
|
fiber(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates medium type of the port number."
|
|
::={ swL2PortCtrlEntry 2 }
|
|
|
|
swL2PortCtrlUnitIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ID of the unit in the device"
|
|
::= { swL2PortCtrlEntry 3 }
|
|
|
|
swL2PortCtrlAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decides if the port is enabled or disabled."
|
|
::= { swL2PortCtrlEntry 4 }
|
|
|
|
swL2PortCtrlNwayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
nway-enabled(2),
|
|
nway-disabled-10Mbps-Half(3),
|
|
nway-disabled-10Mbps-Full(4),
|
|
nway-disabled-100Mbps-Half(5),
|
|
nway-disabled-100Mbps-Full(6),
|
|
nway-disabled-1Gigabps-Half(7),
|
|
nway-disabled-1Gigabps-Full(8),
|
|
nway-disabled-1Gigabps-Full-master(9),
|
|
nway-disabled-1Gigabps-Full-slave(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Chose the port speed, duplex mode, and N-Way function mode."
|
|
::= { swL2PortCtrlEntry 5 }
|
|
|
|
swL2PortCtrlFlowCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flow control mechanism is different between full duplex
|
|
mode and half duplex mode. For half duplex mode, the jamming
|
|
signal is asserted. For full duplex mode, IEEE 802.3x flow
|
|
control function sends PAUSE frames and receives PAUSE frames."
|
|
::= { swL2PortCtrlEntry 6 }
|
|
|
|
swL2PortCtrlLearningState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decides if the port is locked or not."
|
|
::= { swL2PortCtrlEntry 7 }
|
|
|
|
swL2PortCtrlMACNotifyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object sets each port's MAC notification state."
|
|
::= { swL2PortCtrlEntry 8 }
|
|
|
|
-- swL2PortCtrlMulticastfilter OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(0),
|
|
-- forward-all-groups(1),
|
|
-- forward-unregistered-groups(2),
|
|
-- filter-unregistered-groups(3)
|
|
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object controls the multicast port filtering mode for a specified port. "
|
|
-- ::= { swL2PortCtrlEntry 9 }
|
|
|
|
swL2PortCtrlMDIXState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
normal(2),
|
|
cross(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the MDIX setting of the port."
|
|
::= { swL2PortCtrlEntry 10 }
|
|
|
|
swL2PortCtrlJumboFrame OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the switch's jumbo frame settings."
|
|
::= { swL2PortMgmt 3 }
|
|
|
|
swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes how many bytes the max jumbo frame is."
|
|
::= { swL2PortMgmt 4 }
|
|
|
|
-- swL2PortCableDiagnosisTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table that contains cable diagnostic information about every port."
|
|
-- ::= { swL2PortMgmt 5 }
|
|
|
|
-- swL2PortCableDiagnosisEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2PortCableDiagnosisEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of cable diagnostic information for each port of the device."
|
|
-- INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex }
|
|
-- ::= { swL2PortCableDiagnosisTable 1 }
|
|
|
|
-- SwL2PortCableDiagnosisEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2PortCableDiagnosisPortIndex
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairIndex
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisCableStatus
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairStatus
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairLength
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairLengthInaccuracy
|
|
-- INTEGER
|
|
-- }
|
|
|
|
-- swL2PortCableDiagnosisPortIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the module's port number.(1..Max port
|
|
-- number in the module)"
|
|
-- ::= { swL2PortCableDiagnosisEntry 1 }
|
|
|
|
-- swL2PortCableDiagnosisPairIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..4)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates pair index of the port.
|
|
-- The pair 1 means the pin 3 and 6 of the connector.
|
|
-- The pair 2 means the pin 1 and 2 of the connector.
|
|
-- The pair 3 means the pin 7 and 8 of the connector.
|
|
-- The pair 4 means the pin 4 and 5 of the connector."
|
|
-- ::= { swL2PortCableDiagnosisEntry 2 }
|
|
|
|
-- swL2PortCableDiagnosisCableStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- ok(0),
|
|
-- open(1),
|
|
-- short(2),
|
|
-- open-short(3),
|
|
-- not-support(4),
|
|
-- unknown(5)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the cable status."
|
|
-- ::= { swL2PortCableDiagnosisEntry 3 }
|
|
|
|
-- swL2PortCableDiagnosisPairStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- ok(0),
|
|
-- open(1),
|
|
-- short(2),
|
|
-- fail(3),
|
|
-- not-supported(4),
|
|
-- unknown(5)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of the pair."
|
|
-- ::= { swL2PortCableDiagnosisEntry 4 }
|
|
|
|
-- swL2PortCableDiagnosisPairLength OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the approx. length or length to failure of
|
|
-- the pair. The unit value is in meters."
|
|
-- ::= { swL2PortCableDiagnosisEntry 5 }
|
|
|
|
-- swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the inaccuracy of a pair length. The unit value is in meters."
|
|
-- ::= { swL2PortCableDiagnosisEntry 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortCounterCtrlTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortCounterCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that used to clear counter information about every port."
|
|
::= { swL2PortMgmt 6 }
|
|
|
|
swL2PortCounterCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortCounterCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entry used to clear counter information for each port of the device."
|
|
INDEX { swL2PortCounterCtrlPortIndex }
|
|
::= { swL2PortCounterCtrlTable 1 }
|
|
|
|
SwL2PortCounterCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortCounterCtrlPortIndex
|
|
INTEGER,
|
|
swL2PortCounterClearCtrl
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortCounterCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortCounterCtrlEntry 1 }
|
|
|
|
swL2PortCounterClearCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if to clear the counters for each port of the device or not."
|
|
::= { swL2PortCounterCtrlEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortErrTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortErrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortErrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains error information for each port."
|
|
::= { swL2PortMgmt 7 }
|
|
|
|
swL2PortErrEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortErrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information regarding port errors on the device."
|
|
INDEX { swL2PortErrPortIndex }
|
|
::= { swL2PortErrTable 1 }
|
|
|
|
SwL2PortErrEntry ::=
|
|
SEQUENCE {
|
|
swL2PortErrPortIndex
|
|
INTEGER,
|
|
swL2PortErrPortState
|
|
INTEGER,
|
|
swL2PortErrPortConnStatus
|
|
INTEGER,
|
|
swL2PortErrPortReason
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortErrPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port number in
|
|
the module)."
|
|
::= { swL2PortErrEntry 1 }
|
|
|
|
swL2PortErrPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port state is enabled or disabled."
|
|
::= { swL2PortErrEntry 2 }
|
|
|
|
swL2PortErrPortConnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
err-disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the PortStatus is err-disabled or not."
|
|
::= { swL2PortErrEntry 3 }
|
|
|
|
swL2PortErrPortReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- stp-lbd(1),
|
|
storm-control(2),
|
|
ctp-lbd(3),
|
|
ddm(4),
|
|
bpdu_protection(5),
|
|
power-saving(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes if the reason for the port error is STP LBD or Storm control."
|
|
::= { swL2PortErrEntry 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- swL2QOSBandwidthControlTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "."
|
|
-- ::= { swL2QOSMgmt 1 }
|
|
--
|
|
-- swL2QOSBandwidthControlEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2QOSBandwidthControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information contained in the swL2QOSBandwidthControlTable."
|
|
-- INDEX { swL2QOSBandwidthPortIndex }
|
|
-- ::= { swL2QOSBandwidthControlTable 1 }
|
|
--
|
|
-- SwL2QOSBandwidthControlEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2QOSBandwidthPortIndex
|
|
-- INTEGER,
|
|
-- swL2QOSBandwidthRxRate
|
|
-- INTEGER,
|
|
-- swL2QOSBandwidthTxRate
|
|
-- INTEGER,
|
|
-- swL2QOSBandwidthRadiusRxRate
|
|
--- INTEGER,
|
|
-- swL2QOSBandwidthRadiusTxRate
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2QOSBandwidthPortIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..768)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the port ."
|
|
-- ::= { swL2QOSBandwidthControlEntry 1 }
|
|
--
|
|
-- swL2QOSBandwidthRxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER (64..1024001)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates RX Rate of the specified port. Value 1024001 means no limit."
|
|
-- ::= { swL2QOSBandwidthControlEntry 2 }
|
|
--
|
|
-- swL2QOSBandwidthTxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER (64..1024001)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates TX Rate of the specified port. Value 1024001 means no limit."
|
|
-- ::= { swL2QOSBandwidthControlEntry 3 }
|
|
--
|
|
-- swL2QOSBandwidthRadiusRxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The RxRate value comes from RADIUS server,
|
|
-- If an 802.1X port is authenticated, this value
|
|
-- will overwrites the locally configured RxRate. "
|
|
-- ::= { swL2QOSBandwidthControlEntry 4 }
|
|
-- swL2QOSBandwidthRadiusTxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The TxRate value comes from RADIUS server,
|
|
-- If an 802.1X port is authenticated, this value
|
|
-- will overwrites the locally configured TxRate. "
|
|
-- ::= { swL2QOSBandwidthControlEntry 5 }
|
|
--
|
|
-- -----------------------------------------------------------------------------
|
|
--
|
|
-- swL2QOSSchedulingTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "."
|
|
-- ::= { swL2QOSMgmt 2 }
|
|
--
|
|
-- swL2QOSSchedulingEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2QOSSchedulingEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information contained in the swL2QOSSchedulingTable."
|
|
-- INDEX { swL2QOSSchedulingClassIndex }
|
|
-- ::= { swL2QOSSchedulingTable 1 }
|
|
--
|
|
-- SwL2QOSSchedulingEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2QOSSchedulingClassIndex
|
|
-- INTEGER,
|
|
-- swL2QOSSchedulingMaxPkts
|
|
-- INTEGER,
|
|
-- swL2QOSSchedulingMechanism
|
|
-- INTEGER,
|
|
-- swL2QOSSchedulingMaxLatency
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2QOSSchedulingClassIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the hardware queue number."
|
|
-- ::= { swL2QOSSchedulingEntry 1 }
|
|
--
|
|
-- swL2QOSSchedulingMaxPkts OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..15)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the maximum number of packets the hardware priority queue will be allowed
|
|
-- to transmit before allowing the next lowest priority queue to transmit its packets.
|
|
-- a value between 0 and 15 can be specified."
|
|
-- ::= { swL2QOSSchedulingEntry 2 }
|
|
--
|
|
-- swL2QOSSchedulingMechanism OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- strict(1),
|
|
-- roundrobin(2),
|
|
-- weightfair(3)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the mechanism of QoS scheduling."
|
|
-- ::= { swL2QOSSchedulingEntry 3 }
|
|
--
|
|
-- swL2QOSSchedulingMaxLatency OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the maximum amount of time the hardware priority queue will be allowed
|
|
-- to transmit packets before allowing the next lowest priority queue to begin transmitting
|
|
-- its packets. A value between 0 and 255 can be specified- with this value multiplied
|
|
-- by 16 ms to arrive at the total allowed time for queue to transmit packets.
|
|
-- For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting
|
|
-- the last packet until it is finished when the max_latency timer expires. "
|
|
-- ::= { swL2QOSSchedulingEntry 4}
|
|
--
|
|
-- -----------------------------------------------------------------------------
|
|
--
|
|
-- swL2QOS8021pUserPriorityTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "."
|
|
-- ::= { swL2QOSMgmt 3 }
|
|
--
|
|
-- swL2QOS8021pUserPriorityEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2QOS8021pUserPriorityEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information contained in the swL2QOS8021pUserPriorityTable."
|
|
-- INDEX { swL2QOS8021pUserPriorityIndex }
|
|
-- ::= { swL2QOS8021pUserPriorityTable 1 }
|
|
--
|
|
-- SwL2QOS8021pUserPriorityEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2QOS8021pUserPriorityIndex
|
|
-- INTEGER,
|
|
-- swL2QOS8021pUserPriorityClass
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2QOS8021pUserPriorityIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The 802.1p user priority ."
|
|
-- ::= { swL2QOS8021pUserPriorityEntry 1 }
|
|
--
|
|
-- swL2QOS8021pUserPriorityClass OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..6)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of the switch's hardware priority queue. The switch has seven hardware
|
|
-- priority queues available. They are numbered between 0 (the lowest priority)
|
|
-- and 6 (the highest priority)."
|
|
-- ::= { swL2QOS8021pUserPriorityEntry 2 }
|
|
--
|
|
-- -----------------------------------------------------------------------------
|
|
--
|
|
-- swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "."
|
|
-- ::= { swL2QOSMgmt 4 }
|
|
--
|
|
-- swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2QOS8021pDefaultPriorityEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information contained in the swL2QOS8021pDefaultPriorityTable."
|
|
-- INDEX { swL2QOS8021pDefaultPriorityIndex }
|
|
-- ::= { swL2QOS8021pDefaultPriorityTable 1 }
|
|
--
|
|
-- SwL2QOS8021pDefaultPriorityEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2QOS8021pDefaultPriorityIndex
|
|
-- INTEGER,
|
|
-- swL2QOS8021pDefaultPriority
|
|
-- INTEGER,
|
|
-- swL2QOS8021pRadiusPriority
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..768)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the port number ."
|
|
-- ::= { swL2QOS8021pDefaultPriorityEntry 1 }
|
|
--
|
|
-- swL2QOS8021pDefaultPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The priority value to assign to untagged packets received by the
|
|
-- switch ports on the switch.."
|
|
-- ::= { swL2QOS8021pDefaultPriorityEntry 2 }
|
|
--
|
|
-- swL2QOS8021pRadiusPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of 802.1p comes from RADIUS server.
|
|
-- If an 802.1X port is authenticated, this value
|
|
-- will overwrite the local configured value."
|
|
-- ::= { swL2QOS8021pDefaultPriorityEntry 3 }
|
|
--
|
|
-- swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- strict(1),
|
|
-- roundrobin(2),
|
|
-- weightfair(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object controls QoS scheduling Mechanism."
|
|
-- ::= { swL2QOSMgmt 5 }
|
|
--
|
|
-- swL2QOSHolPreventionCtrl OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls QoS HoL Prevention"
|
|
-- ::= { swL2QOSMgmt 6 }
|
|
--
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
-- -----------------------------------------------------------------------------
|
|
--
|
|
-- swL2PortSecurityControlTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A port security feature which controls the address leaning capability and
|
|
-- traffic forwarding decisions. Each port can be enabled or disabled for this function.
|
|
-- When it is enabled and a number is given said N, which allows N addresses to be
|
|
-- learned on this port, the first N learned addresses are locked at this port as
|
|
-- static entries. When the learned addresses number reaches N, any incoming packet
|
|
-- without learned source addresses are discarded (e.g. dropped) and no more new
|
|
-- addresses can be learned on this port."
|
|
-- ::= { swL2PortSecurityMgmt 1 }
|
|
--
|
|
-- swL2PortSecurityControlEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2PortSecurityControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information contained in the swL2PortSecurityControlTable."
|
|
-- INDEX { swL2PortSecurityPortIndex }
|
|
-- ::= { swL2PortSecurityControlTable 1 }
|
|
--
|
|
-- SwL2PortSecurityControlEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2PortSecurityPortIndex
|
|
-- INTEGER,
|
|
-- swL2PortSecurityMaxLernAddr
|
|
-- INTEGER,
|
|
-- swL2PortSecurityMode
|
|
-- INTEGER,
|
|
-- swL2PortSecurityAdmState
|
|
-- INTEGER,
|
|
-- swL2PortSecurityEntryClearCtrl
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2PortSecurityPortIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..768)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the secured port to lock address learning."
|
|
-- ::= { swL2PortSecurityControlEntry 1 }
|
|
--
|
|
-- swL2PortSecurityMaxLernAddr OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates allowable number of addresses to be learned on this port."
|
|
-- ::= { swL2PortSecurityControlEntry 2 }
|
|
--
|
|
-- swL2PortSecurityMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- permanent(2),
|
|
-- deleteOnTimeout(3),
|
|
-- deleteOnReset(4)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the mode of locking address.
|
|
-- In deleteOnTimeout(3) mode - the locked addresses can be aged out after
|
|
-- the aging timer expires. In this mode, when the locked address is aged
|
|
-- out, the number of addresses that can be learned has to be increased by one.
|
|
-- In deleteOnReset(4) mode - Locked addresses never age out unless the system
|
|
-- restarts which will prevent port movement or intrusion."
|
|
-- ::= { swL2PortSecurityControlEntry 3 }
|
|
--
|
|
-- swL2PortSecurityAdmState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- enable(2),
|
|
-- disable(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates administration state of locking address."
|
|
-- ::= { swL2PortSecurityControlEntry 4 }
|
|
--
|
|
-- swL2PortSecurityEntryClearCtrl OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- start(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Used to clear port security entries by port.
|
|
-- Setting this value to 'start' will execute the clear action,
|
|
-- Once cleared, the value returns to 'other'."
|
|
-- ::= { swL2PortSecurityControlEntry 5 }
|
|
--
|
|
-- ------------------------------------------------------------------------------
|
|
--
|
|
-- swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 2 }
|
|
--
|
|
-- swL2PortSecurityDelVlanName OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE (0..32))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates VLAN name."
|
|
-- ::= { swL2PortSecurityDelCtrl 1 }
|
|
--
|
|
-- swL2PortSecurityDelPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..768)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the port."
|
|
-- ::= { swL2PortSecurityDelCtrl 2 }
|
|
--
|
|
-- swL2PortSecurityDelMacAddress OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Specifies a MAC address."
|
|
-- ::= { swL2PortSecurityDelCtrl 3 }
|
|
--
|
|
-- swL2PortSecurityDelActivity OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- none(1),
|
|
-- start(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "."
|
|
-- ::= { swL2PortSecurityDelCtrl 4 }
|
|
--
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortSecurityTrapLogState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- enable(2),
|
|
-- disable(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "When enabled(2),whenever there's a new MAC address that violates
|
|
-- the pre-defined port security configuration, traps will be sent out
|
|
-- and the relevant information will be logged into the system."
|
|
-- ::= { swL2PortSecurityMgmt 3 }
|
|
--
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2DhcpRelayState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates if the DHCP relay function is enabled or
|
|
-- disabled."
|
|
-- ::= { swL2DhcpRelayMgmt 1 }
|
|
|
|
-- swL2DhcpRelayHopCount OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..16)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the maximum number of router hops that
|
|
-- DHCP packets can cross."
|
|
-- ::= { swL2DhcpRelayMgmt 2 }
|
|
|
|
-- swL2DhcpRelayTimeThreshold OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the minimum time in seconds within which
|
|
-- the switch must relay the DHCP request. If this time is
|
|
-- exceeded, the switch will drop the DHCP packet."
|
|
-- ::= { swL2DhcpRelayMgmt 3 }
|
|
|
|
-- swL2DhcpRelayOption82State OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates if the DHCP relay agent information option 82
|
|
-- function is enabled or disabled."
|
|
-- ::= { swL2DhcpRelayMgmt 4 }
|
|
|
|
-- swL2DhcpRelayOption82Check OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates if the checking mechanism of DHCP relay agent
|
|
-- information option 82 is enabled or disabled."
|
|
-- ::= { swL2DhcpRelayMgmt 5 }
|
|
|
|
-- swL2DhcpRelayOption82Policy OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- replace(1),
|
|
-- drop(2),
|
|
-- keep(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the reforwarding policy of DHCP relay agent
|
|
-- information option 82.
|
|
--
|
|
-- replace(1) - replace the exiting option 82 field in messages.
|
|
-- drop(2) - discard messages with existing option 82 field.
|
|
-- keep(3) - retain the existing option 82 field messages."
|
|
-- ::= { swL2DhcpRelayMgmt 6 }
|
|
|
|
-- swL2DhcpRelayCtrlTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2DhcpRelayCtrlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table specifies the IP address as a destination to forward
|
|
-- (relay) DHCP packets to."
|
|
-- ::= { swL2DhcpRelayMgmt 7 }
|
|
|
|
-- swL2DhcpRelayCtrlEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2DhcpRelayCtrlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information that specifies the IP address as a destination
|
|
-- to forward (relay) DHCP packets to."
|
|
-- INDEX { swL2DhcpRelayCtrlInterfaceName, swL2DhcpRelayCtrlServer}
|
|
-- ::= { swL2DhcpRelayCtrlTable 1 }
|
|
|
|
-- SwL2DhcpRelayCtrlEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2DhcpRelayCtrlInterfaceName
|
|
-- DisplayString,
|
|
-- swL2DhcpRelayCtrlServer
|
|
-- IpAddress,
|
|
-- swL2DhcpRelayCtrlState
|
|
-- INTEGER
|
|
-- }
|
|
|
|
-- swL2DhcpRelayCtrlInterfaceName OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(1..12))
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The name of the IP interface."
|
|
-- ::= { swL2DhcpRelayCtrlEntry 1 }
|
|
|
|
-- swL2DhcpRelayCtrlServer OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The DHCP server IP address."
|
|
-- ::= { swL2DhcpRelayCtrlEntry 2 }
|
|
|
|
-- swL2DhcpRelayCtrlState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- invalid(2),
|
|
-- valid(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of this entry.
|
|
--
|
|
-- other(1) - this entry is currently in use but the conditions
|
|
-- under which it will remain so are different from each of
|
|
-- the following values.
|
|
-- invalid(2) - writing this value to the object, and then the
|
|
-- corresponding entry will be removed from the table.
|
|
-- valid(3) - this entry resides in the table."
|
|
-- ::= { swL2DhcpRelayCtrlEntry 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2TrunkMaxSupportedEntries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of entries in the trunk configuration table
|
|
(swL2TrunkCtrlTable)."
|
|
::= { swL2TrunkMgmt 1 }
|
|
|
|
swL2TrunkCurrentNumEntries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current active number of entries in the trunk configuration
|
|
table."
|
|
::= { swL2TrunkMgmt 2 }
|
|
|
|
swL2TrunkCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies which ports group a set of ports(up to 8)
|
|
into a single logical link."
|
|
::= { swL2TrunkMgmt 3 }
|
|
|
|
swL2TrunkCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information that specifies which ports group a set of
|
|
ports(up to 8) into a single logical link."
|
|
INDEX { swL2TrunkIndex }
|
|
::= { swL2TrunkCtrlTable 1 }
|
|
|
|
SwL2TrunkCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkIndex
|
|
INTEGER,
|
|
-- swL2TrunkName
|
|
-- DisplayString,
|
|
swL2TrunkMasterPort
|
|
INTEGER,
|
|
swL2TrunkMember
|
|
PortList,
|
|
swL2TrunkFloodingPort
|
|
INTEGER,
|
|
swL2TrunkType
|
|
INTEGER,
|
|
swL2TrunkState
|
|
RowStatus
|
|
}
|
|
|
|
swL2TrunkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index number of the logical port trunk group. The trunk group
|
|
number depends on the existence of unit and module."
|
|
::= { swL2TrunkCtrlEntry 1 }
|
|
|
|
-- swL2TrunkName OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE (0..12))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The name of logical port trunk group."
|
|
-- ::= { swL2TrunkCtrlEntry 2 }
|
|
|
|
|
|
swL2TrunkMasterPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the master port number of the port trunk
|
|
entry. When using Port Trunk, you cannot configure the other
|
|
ports of the group except the master port.
|
|
Their configuration must be same as the master port (e.g. speed,
|
|
duplex, enabled/disabled, flow control, and so on)."
|
|
::= { swL2TrunkCtrlEntry 3 }
|
|
|
|
swL2TrunkMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of ports included in this Trunk group.
|
|
The trunk port number depends on the existence of the module.
|
|
The maximum number of ports is 8 for one trunk group."
|
|
::= { swL2TrunkCtrlEntry 4 }
|
|
|
|
swL2TrunkFloodingPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the flooding port number of the port trunk
|
|
entry. The first port of the Trunk group is implicitly configured to
|
|
be the flooding port."
|
|
::= { swL2TrunkCtrlEntry 5 }
|
|
|
|
swL2TrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
static(2),
|
|
lacp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of trunk group.
|
|
static : is static trunk group
|
|
lacp : is LACP trunk group . "
|
|
::= { swL2TrunkCtrlEntry 6 }
|
|
|
|
swL2TrunkState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { swL2TrunkCtrlEntry 7 }
|
|
|
|
swL2TrunkAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
mac-source(2),
|
|
mac-destination(3),
|
|
mac-source-dest(4),
|
|
ip-source(5),
|
|
ip-destination(6),
|
|
ip-source-dest(7),
|
|
l4-source(8),
|
|
l4-destination(9),
|
|
l4-source-dest(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures to part of the packet examined by the
|
|
switch when selecting the egress port for transmitting
|
|
load-sharing data."
|
|
::= { swL2TrunkMgmt 4 }
|
|
|
|
swL2TrunkLACPPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies which ports group a set of ports(up to 8)
|
|
into a single logical link."
|
|
::= { swL2TrunkMgmt 5 }
|
|
|
|
swL2TrunkLACPPortEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkLACPPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies which ports group a set of
|
|
ports(up to 8) into a single logical link."
|
|
INDEX { swL2TrunkLACPPortIndex }
|
|
::= { swL2TrunkLACPPortTable 1 }
|
|
|
|
SwL2TrunkLACPPortEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkLACPPortIndex
|
|
INTEGER,
|
|
swL2TrunkLACPPortState
|
|
INTEGER
|
|
}
|
|
|
|
swL2TrunkLACPPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of logical port LACP. "
|
|
::= { swL2TrunkLACPPortEntry 1 }
|
|
|
|
swL2TrunkLACPPortState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of logical port LACP."
|
|
::= { swL2TrunkLACPPortEntry 2 }
|
|
|
|
swL2TrunkVLANTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to manage the VLAN trunking feature of the device."
|
|
::= { swL2TrunkMgmt 6 }
|
|
|
|
swL2TrunkVLANEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the VLAN trunking settings for each port."
|
|
INDEX { swL2TrunkVLANPort }
|
|
::= { swL2TrunkVLANTable 1 }
|
|
|
|
SwL2TrunkVLANEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkVLANPort
|
|
INTEGER,
|
|
swL2TrunkVLANState
|
|
INTEGER
|
|
}
|
|
|
|
swL2TrunkVLANPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port being configured."
|
|
::= { swL2TrunkVLANEntry 1 }
|
|
|
|
swL2TrunkVLANState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the logical port LACP."
|
|
::= { swL2TrunkVLANEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2MirrorLogicTargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates which switch port will sniff another
|
|
port. A trunk port member cannot be configured as a target
|
|
snooping port. The port number is the sequential (logical)
|
|
number which is also applied to the bridge MIB, etc."
|
|
::= { swL2MirrorMgmt 1 }
|
|
|
|
swL2MirrorPortSourceIngress OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the port where ingress packets will be sniffed."
|
|
::= { swL2MirrorMgmt 2 }
|
|
|
|
swL2MirrorPortSourceEgress OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the port where egress packets will be sniffed."
|
|
::= { swL2MirrorMgmt 3 }
|
|
|
|
swL2MirrorPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port mirroring state.
|
|
|
|
other(1) - this entry is currently in use but the conditions
|
|
under which it will remain so are different from each of the
|
|
following values.
|
|
disabled(2) - After writing this value to the object, the
|
|
corresponding entry will be removed from the table.
|
|
enabled(3) - This entry resides in the table."
|
|
::= { swL2MirrorMgmt 4 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
|
|
-- -----------------------------------------------------------------------------
|
|
swL2TrafficSegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrafficSegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies that the port can just forward traffic to the
|
|
specific port list."
|
|
::= { swL2TrafficSegMgmt 1 }
|
|
|
|
swL2TrafficSegEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrafficSegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information which specifies the port with its traffic
|
|
forwarding list."
|
|
INDEX { swL2TrafficSegPort }
|
|
::= { swL2TrafficSegTable 1 }
|
|
|
|
SwL2TrafficSegEntry ::=
|
|
SEQUENCE {
|
|
swL2TrafficSegPort
|
|
INTEGER,
|
|
swL2TrafficSegForwardPorts
|
|
PortList
|
|
}
|
|
|
|
swL2TrafficSegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the logical port."
|
|
::= { swL2TrafficSegEntry 1 }
|
|
|
|
swL2TrafficSegForwardPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port list to which the specific port can forward traffic."
|
|
::= { swL2TrafficSegEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
|
|
-- ----------------------------------------------------------------------------
|
|
swL2MulticastFilterModeVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2MulticastFilterModeVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A table that contains information about VLAN multicast filter mode."
|
|
::={swL2MulticastFilterMode 1}
|
|
|
|
swL2MulticastFilterModeVlanEntry OBJECT-TYPE
|
|
SYNTAX SwL2MulticastFilterModeVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast filter mode information for each VLAN. "
|
|
INDEX {swL2MulticastFilterVid}
|
|
::={swL2MulticastFilterModeVlanTable 1}
|
|
|
|
SwL2MulticastFilterModeVlanEntry ::=
|
|
SEQUENCE{
|
|
swL2MulticastFilterVid
|
|
INTEGER,
|
|
swL2MulticastFilterVlanMode
|
|
INTEGER
|
|
}
|
|
|
|
swL2MulticastFilterVid OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates VID for each VLAN."
|
|
::={swL2MulticastFilterModeVlanEntry 1}
|
|
|
|
swL2MulticastFilterVlanMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
forward-unregistered-groups(2),
|
|
filter-unregistered-groups(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies multicast filter mode for each VLAN."
|
|
::={swL2MulticastFilterModeVlanEntry 2}
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- swL2MulticastFilterModePortTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2MulticastFilterModePortEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " A table that contains information about port multicast filter mode."
|
|
-- ::={swL2MulticastFilterMode 2}
|
|
--
|
|
-- swL2MulticastFilterModePortEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2MulticastFilterModePortEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of multicast filter mode information for each port. "
|
|
-- INDEX {swL2MulticastFilterPortIndex}
|
|
-- ::={swL2MulticastFilterModePortTable 1}
|
|
--
|
|
-- SwL2MulticastFilterModePortEntry ::=
|
|
-- SEQUENCE{
|
|
-- swL2MulticastFilterPortIndex
|
|
-- INTEGER,
|
|
-- swL2MulticastFilterPortMode
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2MulticastFilterPortIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER(1..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Specifies the port number."
|
|
-- ::={swL2MulticastFilterModePortEntry 1}
|
|
--
|
|
-- swL2MulticastFilterPortMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER{
|
|
-- forward-all-groups(1),
|
|
-- forward-unregistered-groups(2),
|
|
-- filter-unregistered-groups(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Specifies multicast filter mode for each port."
|
|
-- ::={swL2MulticastFilterModePortEntry 2}
|
|
-- ********************************************************************
|
|
-- swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
|
|
-- ********************************************************************
|
|
swL2DhcpLocalRelayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of the DHCP local relay
|
|
function of the switch."
|
|
::= { swL2DhcpLocalRelayMgmt 1 }
|
|
|
|
|
|
swL2DhcpLocalRelayVLANTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2DhcpLocalRelayVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to manage the DHCP local relay status
|
|
for each VLAN."
|
|
::={ swL2DhcpLocalRelayMgmt 2}
|
|
|
|
swL2DhcpLocalRelayVLANEntry OBJECT-TYPE
|
|
SYNTAX SwL2DhcpLocalRelayVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object lists the current VLANs in the switch and their
|
|
corresponding DHCP local relay status."
|
|
INDEX { swL2DhcpLocalRelayVLANID }
|
|
::={ swL2DhcpLocalRelayVLANTable 1 }
|
|
|
|
SwL2DhcpLocalRelayVLANEntry ::=
|
|
SEQUENCE{
|
|
swL2DhcpLocalRelayVLANID
|
|
INTEGER,
|
|
swL2DhcpLocalRelayVLANState
|
|
INTEGER
|
|
}
|
|
|
|
swL2DhcpLocalRelayVLANID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shows the VIDs of the current VLANS in the switch."
|
|
::= { swL2DhcpLocalRelayVLANEntry 1 }
|
|
|
|
swL2DhcpLocalRelayVLANState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of the DHCP relay function
|
|
of the VLAN."
|
|
::= { swL2DhcpLocalRelayVLANEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Layer 2 Trap
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
|
|
swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
|
|
|
|
swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 }
|
|
swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 }
|
|
|
|
swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
|
|
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2NotifyMgmt
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2macNotificationSeverity OBJECT-TYPE
|
|
-- SYNTAX AgentNotifyLevel
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicate the level of macNotification detection."
|
|
-- ::= { swL2NotifyMgmt 1 }
|
|
|
|
-- swL2PortSecurityViolationSeverity OBJECT-TYPE
|
|
-- SYNTAX AgentNotifyLevel
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicate the level of PortSecurityViolation detection."
|
|
-- ::= { swL2NotifyMgmt 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
|
|
-- -----------------------------------------------------------------------------
|
|
swL2macNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
swL2macNotifyInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap indicates the MAC addresses variation in address table . "
|
|
::= { swL2NotifFirmware 1 }
|
|
|
|
swL2PortSecurityViolationTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
swPortSecPortIndex,
|
|
swL2PortSecurityViolationMac
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the port_security trap is enabled, new MAC addresses that violate
|
|
the pre-defined port security configuration will trigger trap messages
|
|
to be sent out."
|
|
::= { swL2NotifFirmware 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- notificationBidings
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 }
|
|
|
|
swL2macNotifyInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..1024))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last time reboot information."
|
|
::= { swl2NotificationBidings 1 }
|
|
|
|
swL2PortSecurityViolationMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MAC address that violates the port security configuration."
|
|
::= { swl2NotificationBidings 2 }
|
|
|
|
END
|