WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DES3528P-L2MGMT-MIB

3780 lines
132 KiB
Plaintext
Raw Permalink Blame History

-- -----------------------------------------------------------------------------
-- DES3528P-L2MGMT-MIB
-- -----------------------------------------------------------------------------
-- Version 2.27
-- 2012/03/20
-- Synchronize from L2mgmt mib by Kitty Zheng for project DES3500R3
-- [Modification]
-- Add value list "power-saving(7)" in swL2PortInfoErrorDisabled and
-- swL2PortErrPortReason to support power saving function.(SNR-20100628-001_v1 05.doc)
-- -----------------------------------------------------------------------------
-- Version 2.26
-- 2012/03/05
-- Synchronize from L2mgmt mib by Wesley Wang for project DES3528 R3
-- add swL2IGMPAccessAuthTable
-- ------------------------------------------------------------------------------
-- Version 2.25
-- 2012/02/03
-- Requset By eric liu for project DES3528
-- [Modification]
-- change " des3528 FROM SW3500PRIMGMT-MIB;"
-- to " des3528 FROM SWDES3528-52PRIMGMT-MIB;"
-- ------------------------------------------------------------------------------
-- Version 0.23, 2008/10/08, Moun Lu
-- [Modification]
-- [1]To add the object "swL2PPPoECirIDinsertState".
-- Notes: Requested by D-Link, DES3500
--
-- -----------------------------------------------------------------------------
-- Version 2.24
-- 2008/12/1
-- Requset By Rick Ou for project DGS3700
-- [New Object]
-- move swL2SubnetVLANTable to SubnetVLAN.mib
-- move swL2VlanPrecedenceTable to SubnetVLAN.mib
-- add swL2NniGvrpBpduAddress
-- ------------------------------------------------------------------------------
-- Version 2.19,2008/08/13,Green Zhu,Synchronize from L2mgmtDes30xxp
-- add swL2IGMPAccessAuthTable
-- add swL2TrunkVLANTable
-- add swL2DevCtrlVLANTrunkState
-- -----------------------------------------------------------------------------
-- Version 2.15
-- 2008/10/17
-- Request By Peterson zhou for project DGS32XXR1.3
-- Add swL2DhcpLocalRelayState
-- Add swL2DhcpLocalRelayVLANTable
-- -----------------------------------------------------------------------------
-- Version 2.08
-- 2008/06/02
-- Request By Kelvin Tao for project DGS3700
-- [New Object]
-- 1. add swL2DevCtrlCFM
-- -----------------------------------------------------------------------------
-- Version 2.05
-- 2007/06/05
-- Request By Jenny Zeng for project DES3400
-- [New Object]
-- (a)add swL2IGMPMulticastVlanTagMemberPort, swL2IGMPMulticastVlanState and
-- swL2IGMPMulticastVlanReplaceSourceIp in table swL2IGMPMulticastVlanTable
-- (b)add swL2IGMPMulticastVlanGroupTable
-- (c)add swL2MulticastFilterMode, swL2MulticastFilterModeVlanTable and swL2MulticastFilterModePortTable
-- (d)add swL2MulticastFilterProfileTable, swL2MulticastFilterProfileAddressTable,swL2LimitedMulticastFilterPortTable and
-- swL2MulticastFilterPortMaxGroupTable
--
-- [Modification]
-- (a)remove swL2LimitedMulticastTable and swL2LimitedMulticastResetPort
--
-- Version 2.04
-- 2007/05/22
-- Request By Jenny Zeng for project DES3400
-- (a)add swL2DevCtrlWeb, swL2DevCtrlWebState, swL2DevCtrlWebTcpPort
-- (b)add swL2TrunkLACPPortTable
-- (c)add swL2DevCtrlSnmpTrapState
-- (d)add swL2PortCounterCtrlTable
-- (e)add swL2PortErrTable
-- (f)add swL2PortSecurityEntryClearCtrl in table swL2PortSecurityControlTable
-- (g)add swL2DevCtrlIGMPSnoopingMcstRTOnly
--
-- -----------------------------------------------------------------------------
-- Version 2.03
-- 2006/10/26
-- add swL2VLANMgmt for new feature request(Leander Chang):
-- advertisement control of VALN
-- -----------------------------------------------------------------------------
-- Version 2.02
-- 2006/10/16 (reported from Yan Zhang/CD/CN/Alphanetworks)
-- add object swL2StpForwardBPDU, swL2StpLbd, swL2StpLbdRecoverTime.
-- add table swL2StpPortTable, swL2CosPriorityTable, swL2CosPortPRITable, swL2CosMacBasePRITable
-- for implement trap/log in mac notify and stp loop.
-- -----------------------------------------------------------------------------
-- Version 2.01
-- 2006/7/7
-- added object swL2LimitedMulticastResetPort
-- -----------------------------------------------------------------------------
-- Version 2.00
-- 2006/6/30
-- rearrange the MIB that base on PX and DES3526.
-- -----------------------------------------------------------------------------
-- Version 1.3
-- 2005/12/27
-- added object swL2PortCtrlJumboFrameMaxSize
-- -----------------------------------------------------------------------------
-- Version 1.2
-- 2005/11/11 11:36
-- for implement trap/log in port security violation.
-- add object swL2PortSecurityTrapLogState, swL2PortSecurityViolationMac ,swL2PortSecurityViolationTrap
-- -----------------------------------------------------------------------------
-- Version 1.1
-- 2005/9/12 10:04
-- add swL2PortInfoMediumType in swL2PortInfoTable and
-- add swL2PortCtrlMediumType in swL2PortCtrlTable
-- add swL2PortCtrlJumboFrame
-- -----------------------------------------------------------------------------
-- Version 1.02
-- 2005/4/8 04:31PM
-- By Scott Slong
-- Add swL2DevCtrlManagementVlanId
-- -----------------------------------------------------------------------------
-- Version 1.01
-- 2004/9/21 04:31PM
-- By Karen Huang
-- Add swL2PortCableDiagnosisTable
-- -----------------------------------------------------------------------------
-- Version 1.00
-- Remove swDevInfoSystemUptime, swDevInfoConsoleInuse,swL2DevCtrlUpDownloadState,swDevInfoSaveCfg
-- Remove swL2DevCtrlUpDownloadImageFileName ,swL2DevCtrlUpDownloadImageSourceAddr
-- Remove swL2DevCtrlUpDownloadImage , swL2DevCtrlSaveCfg
-- -----------------------------------------------------------------------------
-- Version 0.02
-- 2002/07/30
-- By Tommy Wang
-- Renamed to DXxxxxx-MIB
-- Add swL2TrafficMgmt
-- Modified swL2DevCtrl
-- Removed swL2PortStTable
-- Removed swL2PortCtrlEntry->swL2PortCtrlBackPressState and
-- swL2PortCtrlBMStromthreshold
-- Modified swL2MirrorMgmt
-- Removed swL2FilterAddrVid
-- Modified swL2IGMPCtrlTable
-- Removed swL2PriorityMgmt
-- Modified swL2TrunkMasterPortIndex MAX-ACCESS read-only to read-write
-- Add swL2IGMPCtrState for invalid(4)
-- Modified swL2PortInfoType
-- Removed swDevInfoFrontPanelLedStatus about RPS and modified its SIZE
--
-- -----------------------------------------------------------------------------
-- Version 0.01
-- 2000/07/03
-- By Chrissy Chen
-- Removed swL2PortTxPrioQueueCtrlTable
-- Modified swL2PortCtrlBMStromPercentage to swL2PortCtrlBMStromthreshold
--
-- -----------------------------------------------------------------------------
DES3528P-L2MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress , TimeTicks , Integer32, Unsigned32,
MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI
DisplayString,RowStatus,TruthValue FROM SNMPv2-TC
--PortList FROM Q-BRIDGE-MIB
AgentNotifyLevel FROM DLINK-ID-REC-MIB
des3528p FROM SWDES3528-52PRIMGMT-MIB;
swL2MgmtMIB MODULE-IDENTITY
LAST-UPDATED "1203200000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
"http://support.dlink.com"
DESCRIPTION
"The Structure of Layer 2 Network Management Information."
::= { des3528p 2 }
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-- in the
-- "canonical"
-- order, copy from RFC1493
VlanId ::= INTEGER (1..4094)
PortList ::= OCTET STRING(SIZE (0..127))
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
-- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
swL2PPPoEMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 25 }
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 }
-- -----------------------------------------------------------------------------
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
-- -----------------------------------------------------------------------------
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
swDevInfoTotalNumOfPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports within this switch. This value is the sum
of the ports within this switch."
::= { swL2DevInfo 1 }
swDevInfoNumOfPortInUse OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports in this switch connected to the segment or
the end stations."
::= { swL2DevInfo 2 }
swDevInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indications.
The first five octets are defined as system LED. The first two
octets are currently unused and must be set to zero. The third
octet indicates the power LED. The fourth octet indicates the
console LED. The fifth LED is RPS (Redundancy Power Supply) LED.
The other octets are the logical port LED. Every two bytes are
presented to a port. The first byte is presented as the Link/Activity
LED. The second byte is presented as the Speed LED.
System LED:
01 = fail/error/non existence.
02 = work normal
Link/Activity LED :
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second most significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be 0."
::= { swL2DevInfo 4 }
-- -----------------------------------------------------------------------------
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
swL2DevCtrlStpState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enable or disable the spanning tree algorithm during
the runtime of the system."
::= { swL2DevCtrl 1 }
swL2DevCtrlIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the layer 2 Internet Group Management
Protocol (IGMP) capture function is enabled or disabled."
::= { swL2DevCtrl 2 }
swL2DevCtrlIGMPSnoopingMcstRTOnly OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls IGMP snooping forward multicast routing only state."
::= { swL2DevCtrl 3 }
-- swL2DevCtrlRmonState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object can enable or disable RMON."
-- ::= { swL2DevCtrl 4 }
swL2DevCtrlSnmpTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the SNMP trap status."
::= { swL2DevCtrl 5 }
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the object is set to active, all statistical counters will
be cleared. If set to normal, no action."
::= { swL2DevCtrl 6 }
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID to which the Dot1dTpFdbTable belongs;
The default value is DEFAULT_VLAN_ID of the system."
::= { swL2DevCtrl 7 }
swL2MACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enable or disable MAC Notification."
::= { swL2DevCtrl 8 }
swL2MACNotifyHistorySize OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the history size of MAC addresses in the MAC Address table.
The default value is 1 ."
::= { swL2DevCtrl 9 }
swL2MACNotifyInterval OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the time interval, in seconds, which will trigger
MAC notification messages."
::= { swL2DevCtrl 10 }
swL2DevCtrlAsymVlanState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables asymmetric VLANs
during the runtime of the system."
::= { swL2DevCtrl 13 }
-- -----------------------------------------------------------------------------
swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 }
swL2DevCtrlTelnetState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the Telnet status."
::= { swL2DevCtrlTelnet 1 }
swL2DevCtrlTelnetTcpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object designates TCP ports.
When Telnet is disabled, this object is not accessible."
::= { swL2DevCtrlTelnet 2 }
-- -----------------------------------------------------------------------------
swL2DevCtrlManagementVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls which previously created VLANs are included
in the System IP Interface."
::= { swL2DevCtrl 16 }
-- -----------------------------------------------------------------------------
swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 17 }
swL2DevCtrlWebState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the Web status."
::= { swL2DevCtrlWeb 1 }
swL2DevCtrlWebTcpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object designates TCP ports.
When Web is disabled, this object is not accessible."
::= { swL2DevCtrlWeb 2 }
swL2DevCtrlLLDPState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the state of the LLDP function.
When this function is enabled, the switch can start to transmit
LLDP packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port
LLDP setting.
For the advertisement of LLDP packets, the switch announces the
information to its neighbor through ports. For the receiving of
LLDP packets, the switch will learn the information from the LLDP
packets advertised from the neighbor in the neighbor table.
"
::= { swL2DevCtrl 18 }
swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When lldp is disabled and lldp forward_message is enabled, the received
LLDP Data Unit packets will be forwarded. "
DEFVAL {disabled}
::={swL2DevCtrl 19}
swL2DevCtrlIpAutoconfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the IP auto configuration state."
::= { swL2DevCtrl 20 }
-- -----------------------------------------------------------------------------
swL2DevCtrlCFM OBJECT IDENTIFIER ::= { swL2DevCtrl 21 }
swL2DevCtrlCFMState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the CFM global state."
::={swL2DevCtrlCFM 1}
swL2DevCtrlCFMPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DevCtrlCFMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing CFM state of speicified ports."
::= { swL2DevCtrlCFM 2 }
swL2DevCtrlCFMPortEntry OBJECT-TYPE
SYNTAX SwL2DevCtrlCFMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of CFM state on speicified ports."
INDEX { swL2DevCtrlCFMPortIndex }
::= { swL2DevCtrlCFMPortTable 1 }
SwL2DevCtrlCFMPortEntry ::=
SEQUENCE {
swL2DevCtrlCFMPortIndex
INTEGER,
swL2DevCtrlCFMPortState
INTEGER
}
swL2DevCtrlCFMPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the port-num."
::= { swL2DevCtrlCFMPortEntry 1 }
swL2DevCtrlCFMPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the CFM state on per-port."
::= { swL2DevCtrlCFMPortEntry 2 }
-- -----------------------------------------------------------------------------
swL2DevCtrlVLANTrunkState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the global state of the VLAN trunking feature of the device."
::={swL2DevCtrl 22}
-- -----------------------------------------------------------------------------
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
swL2DevAlarmNewRoot OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the device has become the new root of the Spanning Tree,
this object decides whether to send a new root trap."
::= { swL2DevAlarm 1 }
swL2DevAlarmTopologyChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when
the switch topology changes. If the object is enabled(3), the topologyChange
trap is sent by the device when any of its configured ports transitions from
the Learning state to the Forwarding state, or from the Forwarding state to
the Blocking state. For the same port transition, the device does not send the
trap if this object value is disabled or other."
::= { swL2DevAlarm 2 }
swL2DevAlarmLinkChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when the link
was changed. If the object is enabled(3), the Link Change trap is sent by
the device when any of its ports link change. The device does not send the
trap if this object value is disabled or other."
::= { swL2DevAlarm 3 }
-- -----------------------------------------------------------------------------
-- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
-- -----------------------------------------------------------------------------
swL2VlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { swL2VLANMgmt 1 }
swL2VlanStaticEntry OBJECT-TYPE
SYNTAX SwL2VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
INDEX { swL2VlanIndex }
::= { swL2VlanStaticTable 1 }
SwL2VlanStaticEntry ::=
SEQUENCE {
swL2VlanIndex
VlanId,
swL2VLANAdvertisement
INTEGER
}
swL2VlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { swL2VlanStaticEntry 1 }
swL2VLANAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the advertisement is active or not."
::= { swL2VlanStaticEntry 2 }
swL2PVIDAutoAssignmentState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the PVID auto assigment state.
If 'Auto-assign PVID' is disabled, PVID can only be changed
by PVID configuration (user changes explicitly). The VLAN
configuration will not automatically change the PVID.
If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures
a port to VLAN X's untagged membership, this port's PVID
will be updated with VLAN X. Using the VLAN list command,
PVID is updated as the last item of the VLAN list. When a user removes
a port from the untagged membership of the PVID's VLAN, the
port's PVID will be assigned 'default VLAN'."
::= { swL2VLANMgmt 2 }
swL2VlanPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing vlan and port role information of each port."
::= { swL2VLANMgmt 3 }
swL2VlanPortInfoEntry OBJECT-TYPE
SYNTAX SwL2VlanPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry of vlan port information."
INDEX { swL2VlanPortInfoPortIndex,swL2VlanPortInfoVid }
::= { swL2VlanPortInfoTable 1 }
SwL2VlanPortInfoEntry ::=
SEQUENCE {
swL2VlanPortInfoPortIndex
INTEGER,
swL2VlanPortInfoVid
INTEGER,
swL2VlanPortInfoPortRole
INTEGER
}
swL2VlanPortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { swL2VlanPortInfoEntry 1 }
swL2VlanPortInfoVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN-ID assigned to a special port"
::= { swL2VlanPortInfoEntry 2 }
swL2VlanPortInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
none(1),
untagged(2),
tagged(3),
dynamic(4),
forbidden(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port role of a special port.when none,it means this port is not belong to the vlan."
::= { swL2VlanPortInfoEntry 3 }
swL2NniGvrpBpduAddress OBJECT-TYPE
SYNTAX INTEGER {
dot1d(1),
dot1ad(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the GVRP's BPDU MAC address of NNI port In Q-in_Q status."
::= { swL2VLANMgmt 6 }
-- -----------------------------------------------------------------------------
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
-- -----------------------------------------------------------------------------
swL2PortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every port."
::= { swL2PortMgmt 1 }
swL2PortInfoEntry OBJECT-TYPE
SYNTAX SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port of the device."
INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType }
::= { swL2PortInfoTable 1 }
SwL2PortInfoEntry ::=
SEQUENCE {
swL2PortInfoPortIndex
INTEGER,
swL2PortInfoMediumType
INTEGER,
swL2PortInfoUnitID
INTEGER,
swL2PortInfoType
INTEGER,
swL2PortInfoLinkStatus
INTEGER,
swL2PortInfoNwayStatus
INTEGER,
-- swL2PortInfoModuleType
-- INTEGER,
swL2PortInfoErrorDisabled
INTEGER
}
swL2PortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortInfoEntry 1 }
swL2PortInfoMediumType OBJECT-TYPE
SYNTAX INTEGER{
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates medium type of the port number."
::={swL2PortInfoEntry 2}
swL2PortInfoUnitID OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates ID of the unit in the system"
::= { swL2PortInfoEntry 3 }
swL2PortInfoType OBJECT-TYPE
SYNTAX INTEGER {
portType-none(0),
portType-100Base-T(2),
portType-100Base-X(3),
portType-1000Base-T(4),
portType-1000Base-X(5),
portType-10GBase-R(6),
portType-10GBase-CX4(7),
portType-SIO(8),
portType-module-empty(9),
portType-user-last(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the connector type of this port."
::= { swL2PortInfoEntry 4 }
swL2PortInfoLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
link-pass(2),
link-fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port link status."
::= { swL2PortInfoEntry 5 }
swL2PortInfoNwayStatus OBJECT-TYPE
SYNTAX INTEGER {
link-down(0),
full-10Mbps-8023x(1),
full-10Mbps-none(2),
half-10Mbps-backp(3),
half-10Mbps-none(4),
full-100Mbps-8023x(5),
full-100Mbps-none(6),
half-100Mbps-backp(7),
half-100Mbps-none(8),
full-1Gigabps-8023x(9),
full-1Gigabps-none(10),
half-1Gigabps-backp(11),
half-1Gigabps-none(12),
full-10Gigabps-8023x(13),
full-10Gigabps-none(14),
half-10Gigabps-8023x(15),
half-10Gigabps-none(16),
empty(17),
err-disabled(18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port speed and duplex mode."
::= { swL2PortInfoEntry 6 }
-- swL2PortInfoModuleType OBJECT-TYPE
-- SYNTAX INTEGER {
-- none(0),
-- moduleType-COMBO(1),
-- moduleType-1394(2),
-- moduleType-1000T(3),
-- moduleType-MGBIC(4),
-- moduleType-1P-SC-SX(5),
-- moduleType-2P-SC-SX(6),
-- moduleType-1P-SC-LX(7),
-- moduleType-2P-SC-LX(8),
-- moduleType-1P-TX(9),
-- moduleType-2P-TX(10),
-- moduleType-1P-MTRJ-SX(11),
-- moduleType-2P-MTRJ-SX(12),
-- moduleType-1P-MTRJ-LX(13),
-- moduleType-2P-MTRJ-LX(14),
-- moduleType-1P-GBIC(15),
-- moduleType-2P-GBIC(16),
-- moduleType-1P-GBIC-1P-TX(17),
-- moduleType-1P-GBIC-1P-STACK(18),
-- moduleType-2P-STACK(19),
-- moduleType-2P-100FX(20),
-- moduleType-1P-100FX(21),
-- moduleType-2P-100FX-NEW(22),
-- moduleType-1P-100FL(23),
-- moduleType-2P-100FL(24),
-- moduleType-2P-100TX(25),
-- moduleType-BaseModule-24PORT(26)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the module type of this port."
-- ::= { swL2PortInfoEntry 7 }
swL2PortInfoErrorDisabled OBJECT-TYPE
SYNTAX INTEGER {
none(0),
storm(1),
-- stp-lbd(2),
unknow(3),
ctp-lbd(4),
power-saving(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the blocking type of this port."
::= { swL2PortInfoEntry 8 }
-- -----------------------------------------------------------------------------
swL2PortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains control information about every port."
::= { swL2PortMgmt 2 }
swL2PortCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of control information for each port on the device."
INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType}
::= { swL2PortCtrlTable 1 }
SwL2PortCtrlEntry ::=
SEQUENCE {
swL2PortCtrlPortIndex
INTEGER,
swL2PortCtrlMediumType
INTEGER,
swL2PortCtrlUnitIndex
INTEGER,
swL2PortCtrlAdminState
INTEGER,
swL2PortCtrlNwayState
INTEGER,
swL2PortCtrlFlowCtrlState
INTEGER,
swL2PortCtrlLearningState
INTEGER,
swL2PortCtrlMACNotifyState
INTEGER,
-- swL2PortCtrlMulticastfilter
-- INTEGER
swL2PortCtrlMDIXState
INTEGER
}
swL2PortCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortCtrlEntry 1 }
swL2PortCtrlMediumType OBJECT-TYPE
SYNTAX INTEGER{
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the medium type of the port number."
::={ swL2PortCtrlEntry 2 }
swL2PortCtrlUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the unit in the device"
::= { swL2PortCtrlEntry 3 }
swL2PortCtrlAdminState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the port is enabled or disabled."
::= { swL2PortCtrlEntry 4 }
swL2PortCtrlNwayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nway-enabled(2),
nway-disabled-10Mbps-Half(3),
nway-disabled-10Mbps-Full(4),
nway-disabled-100Mbps-Half(5),
nway-disabled-100Mbps-Full(6),
nway-disabled-1Gigabps-Half(7),
nway-disabled-1Gigabps-Full(8),
nway-disabled-1Gigabps-Full-master(9),
nway-disabled-1Gigabps-Full-slave(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chose the port speed, duplex mode, and N-Way function mode."
::= { swL2PortCtrlEntry 5 }
swL2PortCtrlFlowCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, the IEEE 802.3x flow
control function sends PAUSE frames and receives PAUSE frames."
::= { swL2PortCtrlEntry 6 }
swL2PortCtrlLearningState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the port is locked or not."
::= { swL2PortCtrlEntry 7 }
swL2PortCtrlMACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets each port's MAC notification state."
::= { swL2PortCtrlEntry 8 }
-- swL2PortCtrlMulticastfilter OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(0),
-- forward-all-groups(1),
-- forward-unregistered-groups(2),
-- filter-unregistered-groups(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object controls the multicast port filtering mode for a specified port. "
-- ::= { swL2PortCtrlEntry 9 }
swL2PortCtrlMDIXState OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
normal(2),
cross(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the MDIX setting of the port."
::= { swL2PortCtrlEntry 10 }
swL2PortCtrlJumboFrame OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the switch's jumbo frame settings."
::= { swL2PortMgmt 3 }
swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes how many bytes the max jumbo frame is."
::= { swL2PortMgmt 4 }
swL2PortCableDiagnosisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains cable diagnostic information about every port."
::= { swL2PortMgmt 5 }
swL2PortCableDiagnosisEntry OBJECT-TYPE
SYNTAX SwL2PortCableDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cable diagnostic information for each port of the device."
INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex }
::= { swL2PortCableDiagnosisTable 1 }
SwL2PortCableDiagnosisEntry ::=
SEQUENCE {
swL2PortCableDiagnosisPortIndex
INTEGER,
swL2PortCableDiagnosisPairIndex
INTEGER,
swL2PortCableDiagnosisCableStatus
INTEGER,
swL2PortCableDiagnosisPairStatus
INTEGER,
swL2PortCableDiagnosisPairLength
INTEGER,
swL2PortCableDiagnosisPairLengthInaccuracy
INTEGER
}
swL2PortCableDiagnosisPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortCableDiagnosisEntry 1 }
swL2PortCableDiagnosisPairIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates pair index of the port.
The pair 1 means the pin 3 and 6 of the connector.
The pair 2 means the pin 1 and 2 of the connector.
The pair 3 means the pin 7 and 8 of the connector.
The pair 4 means the pin 4 and 5 of the connector."
::= { swL2PortCableDiagnosisEntry 2 }
swL2PortCableDiagnosisCableStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
open-short(3),
not-support(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the cable status."
::= { swL2PortCableDiagnosisEntry 3 }
swL2PortCableDiagnosisPairStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
fail(3),
not-supported(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status of the pair."
::= { swL2PortCableDiagnosisEntry 4 }
swL2PortCableDiagnosisPairLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the approx. length or length to failure of
the pair. The unit value is in meters."
::= { swL2PortCableDiagnosisEntry 5 }
swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the inaccuracy of a pair length. The unit value is in meters."
::= { swL2PortCableDiagnosisEntry 6 }
-- -----------------------------------------------------------------------------
-- swL2PortCounterCtrlTable
-- -----------------------------------------------------------------------------
swL2PortCounterCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that used to clear counter information about every port."
::= { swL2PortMgmt 6 }
swL2PortCounterCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortCounterCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entry used to clear counter information for each port of the device."
INDEX { swL2PortCounterCtrlPortIndex }
::= { swL2PortCounterCtrlTable 1 }
SwL2PortCounterCtrlEntry ::=
SEQUENCE {
swL2PortCounterCtrlPortIndex
INTEGER,
swL2PortCounterClearCtrl
INTEGER
}
swL2PortCounterCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortCounterCtrlEntry 1 }
swL2PortCounterClearCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if to clear the counters for each port of the device or not."
::= { swL2PortCounterCtrlEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2PortErrTable
-- -----------------------------------------------------------------------------
swL2PortErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains error information for each port."
::= { swL2PortMgmt 7 }
swL2PortErrEntry OBJECT-TYPE
SYNTAX SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information regarding port errors on the device."
INDEX { swL2PortErrPortIndex }
::= { swL2PortErrTable 1 }
SwL2PortErrEntry ::=
SEQUENCE {
swL2PortErrPortIndex
INTEGER,
swL2PortErrPortState
INTEGER,
swL2PortErrPortConnStatus
INTEGER,
swL2PortErrPortReason
INTEGER
}
swL2PortErrPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)."
::= { swL2PortErrEntry 1 }
swL2PortErrPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port state is enabled or disabled."
::= { swL2PortErrEntry 2 }
swL2PortErrPortConnStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the PortStatus is err-disabled or not."
::= { swL2PortErrEntry 3 }
swL2PortErrPortReason OBJECT-TYPE
SYNTAX INTEGER {
-- stp-lbd(1),
storm-control(2),
ctp-lbd(3),
power-saving(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes if the reason for the port error is STP LBD or Storm control."
::= { swL2PortErrEntry 4 }
-- -----------------------------------------------------------------------------
-- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
-- -----------------------------------------------------------------------------
-- -----------------------------------------------------------------------------
-- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
-- -----------------------------------------------------------------------------
-- swL2LimitedMulticastTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2LimitedMulticastEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "."
-- ::= { swL2LimitedMulticastMgmt 1 }
--
-- swL2LimitedMulticastEntry OBJECT-TYPE
-- SYNTAX SwL2LimitedMulticastEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information contained in the swL2LimitedMulticastTable."
-- INDEX { swL2LimitedMulticastPortIndex }
-- ::= { swL2LimitedMulticastTable 1 }
--
-- SwL2LimitedMulticastEntry ::=
-- SEQUENCE {
-- swL2LimitedMulticastPortIndex
-- INTEGER,
-- swL2LimitedMulticastFromIp
-- IpAddress,
-- swL2LimitedMulticastToIp
-- IpAddress,
-- swL2LimitedMulticastAccess
-- INTEGER,
-- swL2LimitedMulticastState
-- INTEGER
-- }
--
-- swL2LimitedMulticastPortIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the port ."
-- ::= { swL2LimitedMulticastEntry 1 }
--
-- swL2LimitedMulticastFromIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 2 }
--
-- swL2LimitedMulticastToIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 3 }
--
-- swL2LimitedMulticastAccess OBJECT-TYPE
-- SYNTAX INTEGER{
-- none(1),
-- permit(2),
-- deny(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 4 }
--
-- swL2LimitedMulticastState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 5 }
--
-- swL2LimitedMulticastResetPort OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object resets the Limited Multicast address on the specified port.
-- It always return a null message."
-- ::= { swL2LimitedMulticastMgmt 2 }
-- ----------------------------------------------------------------------------
swL2MulticastFilterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about multicast filter address."
::={swL2LimitedMulticastMgmt 1}
swL2MulticastFilterProfileEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter address information for each profile ID. "
INDEX {swL2MulticastFilterProfileIndex}
::={swL2MulticastFilterProfileTable 1}
SwL2MulticastFilterProfileEntry ::=
SEQUENCE{
swL2MulticastFilterProfileIndex
INTEGER,
swL2MulticastFilterProfileName
DisplayString,
swL2MulticastFilterStatus
RowStatus
}
swL2MulticastFilterProfileIndex OBJECT-TYPE
SYNTAX INTEGER(1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates index for each profile."
::={swL2MulticastFilterProfileEntry 1}
swL2MulticastFilterProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies a profile name for each multicast filter profile."
::={swL2MulticastFilterProfileEntry 2}
swL2MulticastFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2MulticastFilterProfileEntry 3 }
-- ----------------------------------------------------------------------------
swL2MulticastFilterProfileAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterProfileAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about multicast filter address."
::={swL2LimitedMulticastMgmt 2}
swL2MulticastFilterProfileAddressEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterProfileAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter address information for each profile ID. "
INDEX {swL2MulticastFilterProfileIdIndex,swL2MulticastFilterFromIp,swL2MulticastFilterToIp}
::={swL2MulticastFilterProfileAddressTable 1}
SwL2MulticastFilterProfileAddressEntry ::=
SEQUENCE{
swL2MulticastFilterProfileIdIndex
INTEGER,
swL2MulticastFilterFromIp
IpAddress,
swL2MulticastFilterToIp
IpAddress,
swL2MulticastFilterAddressState
RowStatus
}
swL2MulticastFilterProfileIdIndex OBJECT-TYPE
SYNTAX INTEGER(1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates index for each profile."
::={swL2MulticastFilterProfileAddressEntry 1}
swL2MulticastFilterFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the head IP address of a multicast address range which will
be binded to a multicast filter profile."
::={swL2MulticastFilterProfileAddressEntry 2}
swL2MulticastFilterToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the tail IP address of a multicast address range which will
be binded to a multicast filter profile."
::={swL2MulticastFilterProfileAddressEntry 3}
swL2MulticastFilterAddressState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
Setting value to createAndGo(4) will add the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile.
Setting value to destroy(6) will remove the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp from multicast filter profile."
::={swL2MulticastFilterProfileAddressEntry 4}
-- ----------------------------------------------------------------------------
swL2LimitedMulticastFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LimitedMulticastFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that used to bind port to profile id."
::={swL2LimitedMulticastMgmt 3}
swL2LimitedMulticastFilterPortEntry OBJECT-TYPE
SYNTAX SwL2LimitedMulticastFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that used to bind port to profile id. "
INDEX {swL2LimitedMulticastFilterPortIndex}
::={swL2LimitedMulticastFilterPortTable 1}
SwL2LimitedMulticastFilterPortEntry ::=
SEQUENCE{
swL2LimitedMulticastFilterPortIndex
INTEGER,
swL2LimitedMulticastFilterPortProfileID
DisplayString,
swL2LimitedMulticastFilterPortAccess
INTEGER,
swL2LimitedMulticastFilterPortProfileStatus
INTEGER
}
swL2LimitedMulticastFilterPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies port as an index."
::={swL2LimitedMulticastFilterPortEntry 1}
swL2LimitedMulticastFilterPortAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the access status for each port."
::= {swL2LimitedMulticastFilterPortEntry 2}
swL2LimitedMulticastFilterPortProfileID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a profile ID list for each port."
::={swL2LimitedMulticastFilterPortEntry 3}
swL2LimitedMulticastFilterPortProfileStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
add(2),
delete(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the multicast filter profile list which bind to each port.
When set add(2), multicast filter profile ID list which specifies in
swL2LimitedMulticastFilterPortProfileID will be bound to the port.
When set delete(3), multicast filter profile ID list which specifies in
swL2LimitedMulticastFilterPortProfileID will be unbound from the port.
The attribute value reverts to 'other' once the action has been done."
::={swL2LimitedMulticastFilterPortEntry 4}
-- ----------------------------------------------------------------------------
swL2MulticastFilterPortMaxGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterPortMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about max group number based on port."
::={swL2LimitedMulticastMgmt 4}
swL2MulticastFilterPortMaxGroupEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterPortMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of max group number information for each port. "
INDEX {swL2MulticastFilterPortMaxGroupPortIndex}
::={swL2MulticastFilterPortMaxGroupTable 1}
SwL2MulticastFilterPortMaxGroupEntry ::=
SEQUENCE{
swL2MulticastFilterPortMaxGroupPortIndex
INTEGER,
swL2MulticastFilterPortMaxGroup
INTEGER
}
swL2MulticastFilterPortMaxGroupPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies port number as table index."
::={swL2MulticastFilterPortMaxGroupEntry 1}
swL2MulticastFilterPortMaxGroup OBJECT-TYPE
SYNTAX INTEGER(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies maximum multicast filter group numbers for each port.
Default value is 0,and 0 means infinite."
::= { swL2MulticastFilterPortMaxGroupEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
-- -----------------------------------------------------------------------------
swL2QOSBandwidthControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 1 }
swL2QOSBandwidthControlEntry OBJECT-TYPE
SYNTAX SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOSBandwidthControlTable."
INDEX { swL2QOSBandwidthPortIndex }
::= { swL2QOSBandwidthControlTable 1 }
SwL2QOSBandwidthControlEntry ::=
SEQUENCE {
swL2QOSBandwidthPortIndex
INTEGER,
swL2QOSBandwidthRxRate
INTEGER,
swL2QOSBandwidthTxRate
INTEGER,
swL2QOSBandwidthRadiusRxRate
INTEGER,
swL2QOSBandwidthRadiusTxRate
INTEGER
}
swL2QOSBandwidthPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port ."
::= { swL2QOSBandwidthControlEntry 1 }
swL2QOSBandwidthRxRate OBJECT-TYPE
SYNTAX INTEGER (64..1024001)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates RX Rate of the specified port. Value 1024001 means no limit."
::= { swL2QOSBandwidthControlEntry 2 }
swL2QOSBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER (64..1024001)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates TX Rate of the specified port. Value 1024001 means no limit."
::= { swL2QOSBandwidthControlEntry 3 }
swL2QOSBandwidthRadiusRxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured RxRate. "
::= { swL2QOSBandwidthControlEntry 4 }
swL2QOSBandwidthRadiusTxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured TxRate. "
::= { swL2QOSBandwidthControlEntry 5 }
-- -----------------------------------------------------------------------------
swL2QOSSchedulingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 2 }
swL2QOSSchedulingEntry OBJECT-TYPE
SYNTAX SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOSSchedulingTable."
INDEX { swL2QOSSchedulingClassIndex }
::= { swL2QOSSchedulingTable 1 }
SwL2QOSSchedulingEntry ::=
SEQUENCE {
swL2QOSSchedulingClassIndex
INTEGER,
swL2QOSSchedulingMaxPkts
INTEGER,
swL2QOSSchedulingMechanism
INTEGER,
swL2QOSSchedulingMaxLatency
INTEGER
}
swL2QOSSchedulingClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hardware queue number."
::= { swL2QOSSchedulingEntry 1 }
swL2QOSSchedulingMaxPkts OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of packets the hardware priority queue will be allowed
to transmit before allowing the next lowest priority queue to transmit its packets.
a value between 0 and 15 can be specified."
::= { swL2QOSSchedulingEntry 2 }
swL2QOSSchedulingMechanism OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
roundrobin(2),
weightfair(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the mechanism of QoS scheduling."
::= { swL2QOSSchedulingEntry 3 }
swL2QOSSchedulingMaxLatency OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum amount of time the hardware priority queue will be allowed
to transmit packets before allowing the next lowest priority queue to begin transmitting
its packets. A value between 0 and 255 can be specified- with this value multiplied
by 16 ms to arrive at the total allowed time for queue to transmit packets.
For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting
the last packet until it is finished when the max_latency timer expires. "
::= { swL2QOSSchedulingEntry 4}
-- -----------------------------------------------------------------------------
swL2QOS8021pUserPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 3 }
swL2QOS8021pUserPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOS8021pUserPriorityTable."
INDEX { swL2QOS8021pUserPriorityIndex }
::= { swL2QOS8021pUserPriorityTable 1 }
SwL2QOS8021pUserPriorityEntry ::=
SEQUENCE {
swL2QOS8021pUserPriorityIndex
INTEGER,
swL2QOS8021pUserPriorityClass
INTEGER
}
swL2QOS8021pUserPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p user priority ."
::= { swL2QOS8021pUserPriorityEntry 1 }
swL2QOS8021pUserPriorityClass OBJECT-TYPE
SYNTAX INTEGER (0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has seven hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 6 (the highest priority)."
::= { swL2QOS8021pUserPriorityEntry 2 }
-- -----------------------------------------------------------------------------
swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 4 }
swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOS8021pDefaultPriorityTable."
INDEX { swL2QOS8021pDefaultPriorityIndex }
::= { swL2QOS8021pDefaultPriorityTable 1 }
SwL2QOS8021pDefaultPriorityEntry ::=
SEQUENCE {
swL2QOS8021pDefaultPriorityIndex
INTEGER,
swL2QOS8021pDefaultPriority
INTEGER,
swL2QOS8021pRadiusPriority
INTEGER
}
swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port number ."
::= { swL2QOS8021pDefaultPriorityEntry 1 }
swL2QOS8021pDefaultPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value to assign to untagged packets received by the
switch ports on the switch.."
::= { swL2QOS8021pDefaultPriorityEntry 2 }
swL2QOS8021pRadiusPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated, this value
will overwrite the local configured value."
::= { swL2QOS8021pDefaultPriorityEntry 3 }
swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
roundrobin(2),
weightfair(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls QoS scheduling Mechanism."
::= { swL2QOSMgmt 5 }
swL2QOSHolPreventionCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls QoS HoL Prevention"
::= { swL2QOSMgmt 6 }
-- -----------------------------------------------------------------------------
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
-- -----------------------------------------------------------------------------
swL2PortSecurityControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A port security feature which controls the address leaning capability and
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given said N, which allows N addresses to be
learned on this port, the first N learned addresses are locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet
without learned source addresses are discarded (e.g. dropped) and no more new
addresses can be learned on this port."
::= { swL2PortSecurityMgmt 1 }
swL2PortSecurityControlEntry OBJECT-TYPE
SYNTAX SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2PortSecurityControlTable."
INDEX { swL2PortSecurityPortIndex }
::= { swL2PortSecurityControlTable 1 }
SwL2PortSecurityControlEntry ::=
SEQUENCE {
swL2PortSecurityPortIndex
INTEGER,
swL2PortSecurityMaxLernAddr
INTEGER,
swL2PortSecurityMode
INTEGER,
swL2PortSecurityAdmState
INTEGER,
swL2PortSecurityEntryClearCtrl
INTEGER
}
swL2PortSecurityPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the secured port to lock address learning."
::= { swL2PortSecurityControlEntry 1 }
swL2PortSecurityMaxLernAddr OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates allowable number of addresses to be learned on this port."
::= { swL2PortSecurityControlEntry 2 }
swL2PortSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
permanent(2),
deleteOnTimeout(3),
deleteOnReset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of locking address.
In deleteOnTimeout(3) mode - the locked addresses can be aged out after
the aging timer expires. In this mode, when the locked address is aged
out, the number of addresses that can be learned has to be increased by one.
In deleteOnReset(4) mode - Locked addresses never age out unless the system
restarts which will prevent port movement or intrusion."
::= { swL2PortSecurityControlEntry 3 }
swL2PortSecurityAdmState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates administration state of locking address."
::= { swL2PortSecurityControlEntry 4 }
swL2PortSecurityEntryClearCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to clear port security entries by port.
Setting this value to 'start' will execute the clear action,
Once cleared, the value returns to 'other'."
::= { swL2PortSecurityControlEntry 5 }
-- -----------------------------------------------------------------------------
swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 2 }
swL2PortSecurityDelVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates VLAN name."
::= { swL2PortSecurityDelCtrl 1 }
swL2PortSecurityDelPort OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port."
::= { swL2PortSecurityDelCtrl 2 }
swL2PortSecurityDelMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies a MAC address."
::= { swL2PortSecurityDelCtrl 3 }
swL2PortSecurityDelActivity OBJECT-TYPE
SYNTAX INTEGER {
none(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"."
::= { swL2PortSecurityDelCtrl 4 }
-- -----------------------------------------------------------------------------
swL2PortSecurityTrapLogState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled(2),whenever there's a new MAC address that violates
the pre-defined port security configuration, traps will be sent out
and the relevant information will be logged into the system."
::= { swL2PortSecurityMgmt 3 }
-- -----------------------------------------------------------------------------
-- swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
-- -----------------------------------------------------------------------------
swL2DhcpRelayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the DHCP relay function is enabled or
disabled."
::= { swL2DhcpRelayMgmt 1 }
swL2DhcpRelayHopCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of router hops that
DHCP packets can cross."
::= { swL2DhcpRelayMgmt 2 }
swL2DhcpRelayTimeThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the minimum time in seconds within which
the switch must relay the DHCP request. If this time is
exceeded, the switch will drop the DHCP packet."
::= { swL2DhcpRelayMgmt 3 }
swL2DhcpRelayOption82State OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the DHCP relay agent information option 82
function is enabled or disabled."
::= { swL2DhcpRelayMgmt 4 }
swL2DhcpRelayOption82Check OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the checking mechanism of DHCP relay agent
information option 82 is enabled or disabled."
::= { swL2DhcpRelayMgmt 5 }
swL2DhcpRelayOption82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(1),
drop(2),
keep(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the reforwarding policy of DHCP relay agent
information option 82.
replace(1) - replace the exiting option 82 field in messages.
drop(2) - discard messages with existing option 82 field.
keep(3) - retain the existing option 82 field messages."
::= { swL2DhcpRelayMgmt 6 }
swL2DhcpRelayCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DhcpRelayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the IP address as a destination to forward
(relay) DHCP packets to."
::= { swL2DhcpRelayMgmt 7 }
swL2DhcpRelayCtrlEntry OBJECT-TYPE
SYNTAX SwL2DhcpRelayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to."
INDEX { swL2DhcpRelayCtrlInterfaceName, swL2DhcpRelayCtrlServer}
::= { swL2DhcpRelayCtrlTable 1 }
SwL2DhcpRelayCtrlEntry ::=
SEQUENCE {
swL2DhcpRelayCtrlInterfaceName
DisplayString,
swL2DhcpRelayCtrlServer
IpAddress,
swL2DhcpRelayCtrlState
INTEGER
}
swL2DhcpRelayCtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the IP interface."
::= { swL2DhcpRelayCtrlEntry 1 }
swL2DhcpRelayCtrlServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP server IP address."
::= { swL2DhcpRelayCtrlEntry 2 }
swL2DhcpRelayCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry resides in the table."
::= { swL2DhcpRelayCtrlEntry 3 }
-- -----------------------------------------------------------------------------
-- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
-- -----------------------------------------------------------------------------
swL2TrunkMaxSupportedEntries OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of entries in the trunk configuration table
(swL2TrunkCtrlTable)."
::= { swL2TrunkMgmt 1 }
swL2TrunkCurrentNumEntries OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active number of entries in the trunk configuration
table."
::= { swL2TrunkMgmt 2 }
swL2TrunkCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies which ports group a set of ports(up to 8)
into a single logical link."
::= { swL2TrunkMgmt 3 }
swL2TrunkCtrlEntry OBJECT-TYPE
SYNTAX SwL2TrunkCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that specifies which ports group a set of
ports(up to 8) into a single logical link."
INDEX { swL2TrunkIndex }
::= { swL2TrunkCtrlTable 1 }
SwL2TrunkCtrlEntry ::=
SEQUENCE {
swL2TrunkIndex
INTEGER,
-- swL2TrunkName
-- DisplayString,
swL2TrunkMasterPort
INTEGER,
swL2TrunkMember
PortList,
swL2TrunkFloodingPort
INTEGER,
swL2TrunkType
INTEGER,
swL2TrunkState
RowStatus
}
swL2TrunkIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module."
::= { swL2TrunkCtrlEntry 1 }
-- swL2TrunkName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..12))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The name of logical port trunk group."
-- ::= { swL2TrunkCtrlEntry 2 }
swL2TrunkMasterPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the master port number of the port trunk
entry. When using Port Trunk, you cannot configure the other
ports of the group except the master port.
Their configuration must be same as the master port (e.g. speed,
duplex, enabled/disabled, flow control, and so on)."
::= { swL2TrunkCtrlEntry 3 }
swL2TrunkMember OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group."
::= { swL2TrunkCtrlEntry 4 }
swL2TrunkFloodingPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the flooding port number of the port trunk
entry. The first port of the Trunk group is implicitly configured to
be the flooding port."
::= { swL2TrunkCtrlEntry 5 }
swL2TrunkType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
static(2),
lacp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of trunk group.
static : is static trunk group
lacp : is LACP trunk group . "
::= { swL2TrunkCtrlEntry 6 }
swL2TrunkState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2TrunkCtrlEntry 7 }
swL2TrunkAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
other(1),
mac-source(2),
mac-destination(3),
mac-source-dest(4),
ip-source(5),
ip-destination(6),
ip-source-dest(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures to part of the packet examined by the
switch when selecting the egress port for transmitting
load-sharing data."
::= { swL2TrunkMgmt 4 }
swL2TrunkLACPPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies which ports group a set of ports(up to 8)
into a single logical link."
::= { swL2TrunkMgmt 5 }
swL2TrunkLACPPortEntry OBJECT-TYPE
SYNTAX SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies which ports group a set of
ports(up to 8) into a single logical link."
INDEX { swL2TrunkLACPPortIndex }
::= { swL2TrunkLACPPortTable 1 }
SwL2TrunkLACPPortEntry ::=
SEQUENCE {
swL2TrunkLACPPortIndex
INTEGER,
swL2TrunkLACPPortState
INTEGER
}
swL2TrunkLACPPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of logical port LACP. "
::= { swL2TrunkLACPPortEntry 1 }
swL2TrunkLACPPortState OBJECT-TYPE
SYNTAX INTEGER{
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of logical port LACP."
::= { swL2TrunkLACPPortEntry 2 }
swL2TrunkVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the VLAN trunking feature of the device."
::= { swL2TrunkMgmt 6 }
swL2TrunkVLANEntry OBJECT-TYPE
SYNTAX SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to configure the VLAN trunking settings for each port."
INDEX { swL2TrunkVLANPort }
::= { swL2TrunkVLANTable 1 }
SwL2TrunkVLANEntry ::=
SEQUENCE {
swL2TrunkVLANPort
INTEGER,
swL2TrunkVLANState
INTEGER
}
swL2TrunkVLANPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port being configured."
::= { swL2TrunkVLANEntry 1 }
swL2TrunkVLANState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the logical port."
::= { swL2TrunkVLANEntry 2 }
-- -----------------------------------------------------------------------------
-- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
-- -----------------------------------------------------------------------------
swL2MirrorLogicTargetPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which switch port will sniff another
port. A trunk port member cannot be configured as a target
snooping port. The port number is the sequential (logical)
number which is also applied to the bridge MIB, etc."
::= { swL2MirrorMgmt 1 }
swL2MirrorPortSourceIngress OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the port where ingress packets will be sniffed."
::= { swL2MirrorMgmt 2 }
swL2MirrorPortSourceEgress OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the port where egress packets will be sniffed."
::= { swL2MirrorMgmt 3 }
swL2MirrorPortState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port mirroring state.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of the
following values.
disabled(2) - After writing this value to the object, the
corresponding entry will be removed from the table.
enabled(3) - This entry resides in the table."
::= { swL2MirrorMgmt 4 }
-- -----------------------------------------------------------------------------
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
-- -----------------------------------------------------------------------------
swL2IGMPMaxSupportedVlans OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of VLANs in the layer 2 IGMP control table
(swL2IGMPCtrlTable)."
::= { swL2IGMPMgmt 1 }
swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of multicast IP groups per VLAN in the layer 2
IGMP information table(swL2IGMPQueryInfoTable)."
::= { swL2IGMPMgmt 2 }
-- swL2IGMPLastQueryIPAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IP address of last sent IGMP query packet."
-- ::= { swL2IGMPMgmt 3 }
swL2IGMPSnoopingMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the global state of igmp_snoop multicast_vlan."
::={swL2IGMPMgmt 3}
swL2IGMPCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled,
there is only one entry in the table, with an index of 1. If the
VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12,
with an index range from 1 to 12."
::= { swL2IGMPMgmt 4 }
swL2IGMPCtrlEntry OBJECT-TYPE
SYNTAX SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled."
INDEX { swL2IGMPCtrlVid }
::= { swL2IGMPCtrlTable 1 }
SwL2IGMPCtrlEntry ::=
SEQUENCE {
-- swL2IGMPCtrlIndex
-- INTEGER,
swL2IGMPCtrlVid
INTEGER,
swL2IGMPQueryInterval
INTEGER,
swL2IGMPMaxResponseTime
INTEGER,
swL2IGMPRobustness
INTEGER,
swL2IGMPLastMemberQueryInterval
INTEGER,
swL2IGMPHostTimeout
INTEGER,
swL2IGMPRouteTimeout
INTEGER,
swL2IGMPLeaveTimer
INTEGER,
swL2IGMPQueryState
INTEGER,
swL2IGMPCurrentState
INTEGER,
swL2IGMPCtrlState
INTEGER,
swL2IGMPFastLeaveState
INTEGER
}
-- swL2IGMPCtrlIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP control entry number. Its scale
-- depends on the current VLAN state (swL2VlanInfoStatus). If the
-- VLAN is disabled, there is only one entry in the table, with index 1.
-- If VLAN is in Port-Base or 802.1q mode, the maximum number of entries
-- is 12, with an index range from 1 to 12."
-- ::= { swL2IGMPCtrlEntry 1 }
swL2IGMPCtrlVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IGMP control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by management users.
If the VLAN is in Port-Base mode, the VID is arranged from 1 to 12, in a
fixed form. If the VLAN is in 802.1q mode, the VID setting can be changed
from 1 to 4094 by the management user, and the VID in each entry must be
unique within the IGMP Control Table."
::= { swL2IGMPCtrlEntry 1 }
swL2IGMPQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which IGMP Host-Query packets are
transmitted on this switch."
DEFVAL { 125 }
::= { swL2IGMPCtrlEntry 2 }
swL2IGMPMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time on this switch."
DEFVAL { 10 }
::= { swL2IGMPCtrlEntry 3 }
swL2IGMPRobustness OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses."
DEFVAL { 2 }
::= { swL2IGMPCtrlEntry 4 }
swL2IGMPLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 5 }
swL2IGMPHostTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timer value for sending IGMP query packets when none were
sent by the host on the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query messages if the
timer expires. Please reference RFC2236-1997."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 6 }
swL2IGMPRouteTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 7 }
swL2IGMPLeaveTimer OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 8 }
swL2IGMPQueryState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the IGMP query is enabled or disabled."
::= { swL2IGMPCtrlEntry 9 }
swL2IGMPCurrentState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
querier(2),
non-querier(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current IGMP query state."
::= { swL2IGMPCtrlEntry 10 }
swL2IGMPCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable(2) - IGMP function is disabled for this entry.
enable(3) - IGMP function is enabled for this entry."
::= { swL2IGMPCtrlEntry 11 }
swL2IGMPFastLeaveState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the fast_leave status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable(2) - IGMP fast-leave function is disabled for this entry.
enable(3) - IGMP fast-leave function is enabled for this entry."
::= { swL2IGMPCtrlEntry 12 }
swL2IGMPQueryInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the number current IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device."
::= { swL2IGMPMgmt 5 }
swL2IGMPQueryInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entry are all enabled."
INDEX { swL2IGMPInfoVid }
::= { swL2IGMPQueryInfoTable 1 }
SwL2IGMPQueryInfoEntry ::=
SEQUENCE {
-- swL2IGMPInfoIndex
-- INTEGER,
swL2IGMPInfoVid
INTEGER,
swL2IGMPInfoQueryCount
INTEGER,
swL2IGMPInfoTxQueryCount
INTEGER
}
-- swL2IGMPInfoIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP query information entry
-- number. It could be up to 12 entries, depending on the current
-- number of VLAN entries."
-- ::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable)."
::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis."
::= { swL2IGMPQueryInfoEntry 2 }
swL2IGMPInfoTxQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1."
::= { swL2IGMPQueryInfoEntry 3 }
swL2IGMPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of the associated VLAN entries are all enabled.
Note that the priority of IGMP table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between entries in the
IGMP Table and Filtering Table inside the switch's H/W address table,
then Filtering Table entry overwrites the colliding entry of the IGMP Table.
Also see the swL2FilterMgmt description."
::= { swL2IGMPMgmt 6 }
swL2IGMPInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP information which was captured by
this device, provided that the swL2DevCtrlIGMPSnooping and the
swL2IGMPCtrlState of associated VLAN entries are all enabled."
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr }
::= { swL2IGMPInfoTable 1 }
SwL2IGMPInfoEntry ::=
SEQUENCE {
swL2IGMPVid
INTEGER,
swL2IGMPGroupIpAddr
IpAddress,
swL2IGMPMacAddr
MacAddress,
swL2IGMPPortMap
PortList,
swL2IGMPIpGroupReportCount
INTEGER
}
swL2IGMPVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of individual IGMP table entries.
It shows the VID IGMP report information captured on the network."
::= { swL2IGMPInfoEntry 1 }
swL2IGMPGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies group IP addresses which were captured from
IGMP packets, on a per-VLAN basis."
::= { swL2IGMPInfoEntry 2 }
swL2IGMPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies MAC addresses which correspond
to the swL2IGMPGroupIpAddr, on per-VLAN basis."
::= { swL2IGMPInfoEntry 3 }
swL2IGMPPortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which ports belong to the same
multicast group, on a per-VLAN basis. Each multicast group has an
octet string which is indicated by a port map. The most significant
bit represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the switch is
represented by a single bit within the value of this object. If that bit
has a value of '1' then that port is included in the set of ports; the
port is not included if its bit has a value of '0'(Note that the setting
of the bits corresponding to the port from which a frame is received is
irrelevant). The 4 octets represent one unit port according to its logical
port. If the unit is less than 32 ports, other ports are not affected and
are replaced with zeroes."
::= { swL2IGMPInfoEntry 4 }
swL2IGMPIpGroupReportCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how many report packets were receive by our
device, that correspond with this entry when the IGMP function is enabled
on per-VLAN basis."
::= { swL2IGMPInfoEntry 5 }
-- -----------------------------------------------------------------------------
-- swL2IGMPRouterPortTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 7 }
-- -----------------------------------------------------------------------------
swL2IGMPRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information of the router port table."
::= { swL2IGMPMgmt 7 }
swL2IGMPRouterPortEntry OBJECT-TYPE
SYNTAX SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of swL2IGMPRouterPortTable."
INDEX { swL2IGMPRouterPortVlanid }
::= { swL2IGMPRouterPortTable 1 }
SwL2IGMPRouterPortEntry ::=
SEQUENCE {
swL2IGMPRouterPortVlanid
INTEGER,
swL2IGMPRouterPortVlanName
DisplayString,
swL2IGMPRouterPortStaticPortList
PortList,
swL2IGMPRouterPortDynamicPortList
PortList,
swL2IGMPRouterPortForbiddenPortList
PortList
}
swL2IGMPRouterPortVlanid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the router port entry."
::= { swL2IGMPRouterPortEntry 1 }
swL2IGMPRouterPortVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the router port entry."
::= { swL2IGMPRouterPortEntry 2 }
swL2IGMPRouterPortStaticPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the static portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 3 }
swL2IGMPRouterPortDynamicPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the dynamic portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 4 }
swL2IGMPRouterPortForbiddenPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the forbidden portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 5 }
-- -----------------------------------------------------------------------------
-- swL2IGMPMulticastVlanTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 8 }
-- -----------------------------------------------------------------------------
swL2IGMPMulticastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information of the IGMP snooping multicast VLAN table."
::= { swL2IGMPMgmt 8 }
swL2IGMPMulticastVlanEntry OBJECT-TYPE
SYNTAX SwL2IGMPMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of swL2IGMPMulticastVlanTable."
INDEX { swL2IGMPMulticastVlanid}
::= { swL2IGMPMulticastVlanTable 1 }
SwL2IGMPMulticastVlanEntry ::=
SEQUENCE {
swL2IGMPMulticastVlanid
INTEGER,
swL2IGMPMulticastVlanName
DisplayString,
swL2IGMPMulticastVlanSourcePort
PortList,
swL2IGMPMulticastVlanMemberPort
PortList,
swL2IGMPMulticastVlanTagMemberPort
PortList,
swL2IGMPMulticastVlanState
INTEGER,
swL2IGMPMulticastVlanReplaceSourceIp
IpAddress,
swL2IGMPMulticastVlanRowStatus
RowStatus,
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction
INTEGER
}
swL2IGMPMulticastVlanid OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry."
::= { swL2IGMPMulticastVlanEntry 1 }
swL2IGMPMulticastVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry."
::= { swL2IGMPMulticastVlanEntry 2 }
swL2IGMPMulticastVlanSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate the portlist of the source ports of IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry. And the IGMP control messages received from the
member ports would be forwarded to the source ports. "
::= { swL2IGMPMulticastVlanEntry 3 }
swL2IGMPMulticastVlanMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate the portlist of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry. And the IGMP control messages received from the
member ports would be forwarded to the source ports. "
::= { swL2IGMPMulticastVlanEntry 4 }
swL2IGMPMulticastVlanTagMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate the portlist of the tag member ports of IGMP
snooping multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 5 }
swL2IGMPMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object can be enabled or disabled IGMP_snooping multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 6 }
swL2IGMPMulticastVlanReplaceSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replace source IP of this multicast vlan."
::= { swL2IGMPMulticastVlanEntry 7 }
swL2IGMPMulticastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2IGMPMulticastVlanEntry 8 }
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if remove all the multicast address
list from the IGMP multicast VLAN or not."
::= { swL2IGMPMulticastVlanEntry 9 }
-- -----------------------------------------------------------------------------
-- swL2IGMPMulticastVlanGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 9 }
-- -----------------------------------------------------------------------------
swL2IGMPMulticastVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the IGMP snooping multicast VLAN group information"
::= { swL2IGMPMgmt 9 }
swL2IGMPMulticastVlanGroupEntry OBJECT-TYPE
SYNTAX SwL2IGMPMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP snooping multicast VLAN group."
INDEX { swL2IGMPMulticastVlanGroupVid,swL2IGMPMulticastVlanGroupFromIp,swL2IGMPMulticastVlanGroupToIp }
::= { swL2IGMPMulticastVlanGroupTable 1 }
SwL2IGMPMulticastVlanGroupEntry ::=
SEQUENCE {
swL2IGMPMulticastVlanGroupVid
INTEGER,
swL2IGMPMulticastVlanGroupFromIp
IpAddress,
swL2IGMPMulticastVlanGroupToIp
IpAddress,
swL2IGMPMulticastVlanGroupStatus
RowStatus
}
swL2IGMPMulticastVlanGroupVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Vid of IGMP snooping multicast VLAN group."
::= { swL2IGMPMulticastVlanGroupEntry 1 }
swL2IGMPMulticastVlanGroupFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { swL2IGMPMulticastVlanGroupEntry 2 }
swL2IGMPMulticastVlanGroupToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { swL2IGMPMulticastVlanGroupEntry 3 }
swL2IGMPMulticastVlanGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2IGMPMulticastVlanGroupEntry 4 }
-- -----------------------------------------------------------------------------
-- swL2IGMPAccessAuthTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 13 }
-- -----------------------------------------------------------------------------
swL2IGMPAccessAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP Access Authentication
configurations of the device."
::= { swL2IGMPMgmt 13 }
swL2IGMPAccessAuthEntry OBJECT-TYPE
SYNTAX SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of manageable entities for IGMP Access Authentication.
The configuration is done per port."
INDEX { swL2IGMPAccessAuthPort }
::= { swL2IGMPAccessAuthTable 1 }
SwL2IGMPAccessAuthEntry ::=
SEQUENCE {
swL2IGMPAccessAuthPort
INTEGER,
swL2IGMPAccessAuthState
INTEGER
}
swL2IGMPAccessAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured."
::= { swL2IGMPAccessAuthEntry 1 }
swL2IGMPAccessAuthState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the status of IGMP Access Authentication of the port."
::= { swL2IGMPAccessAuthEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
-- -----------------------------------------------------------------------------
-- -----------------------------------------------------------------------------
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
-- -----------------------------------------------------------------------------
swL2TrafficSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies that the port can just forward traffic to the
specific port list."
::= { swL2TrafficSegMgmt 1 }
swL2TrafficSegEntry OBJECT-TYPE
SYNTAX SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information which specifies the port with its traffic
forwarding list."
INDEX { swL2TrafficSegPort }
::= { swL2TrafficSegTable 1 }
SwL2TrafficSegEntry ::=
SEQUENCE {
swL2TrafficSegPort
INTEGER,
swL2TrafficSegForwardPorts
PortList
}
swL2TrafficSegPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the logical port."
::= { swL2TrafficSegEntry 1 }
swL2TrafficSegForwardPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port list to which the specific port can forward traffic."
::= { swL2TrafficSegEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
-- -----------------------------------------------------------------------------
-- -----------------------------------------------------------------------------
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
-- -----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
-- ----------------------------------------------------------------------------
swL2MulticastFilterModeVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterModeVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about VLAN multicast filter mode."
::={swL2MulticastFilterMode 1}
swL2MulticastFilterModeVlanEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterModeVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter mode information for each VLAN. "
INDEX {swL2MulticastFilterVid}
::={swL2MulticastFilterModeVlanTable 1}
SwL2MulticastFilterModeVlanEntry ::=
SEQUENCE{
swL2MulticastFilterVid
INTEGER,
swL2MulticastFilterVlanMode
INTEGER
}
swL2MulticastFilterVid OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates VID for each VLAN."
::={swL2MulticastFilterModeVlanEntry 1}
swL2MulticastFilterVlanMode OBJECT-TYPE
SYNTAX INTEGER{
forward-all-groups(1),
forward-unregistered-groups(2),
filter-unregistered-groups(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies multicast filter mode for each VLAN."
::={swL2MulticastFilterModeVlanEntry 2}
-- ----------------------------------------------------------------------------
-- swL2MulticastFilterModePortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2MulticastFilterModePortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- " A table that contains information about port multicast filter mode."
-- ::={swL2MulticastFilterMode 2}
--
-- swL2MulticastFilterModePortEntry OBJECT-TYPE
-- SYNTAX SwL2MulticastFilterModePortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of multicast filter mode information for each port. "
-- INDEX {swL2MulticastFilterPortIndex}
-- ::={swL2MulticastFilterModePortTable 1}
--
-- SwL2MulticastFilterModePortEntry ::=
-- SEQUENCE{
-- swL2MulticastFilterPortIndex
-- INTEGER,
-- swL2MulticastFilterPortMode
-- INTEGER
-- }
--
-- swL2MulticastFilterPortIndex OBJECT-TYPE
-- SYNTAX INTEGER(1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Specifies the port number."
-- ::={swL2MulticastFilterModePortEntry 1}
--
-- swL2MulticastFilterPortMode OBJECT-TYPE
-- SYNTAX INTEGER{
-- forward-all-groups(1),
-- forward-unregistered-groups(2),
-- filter-unregistered-groups(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies multicast filter mode for each port."
-- ::={swL2MulticastFilterModePortEntry 2}
-- ----------------------------------------------------------------------------
-- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
-- ----------------------------------------------------------------------------
swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 }
swL2LoopDetectAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection status for the system."
::= { swL2LoopDetectCtrl 1 }
swL2LoopDetectInterval OBJECT-TYPE
SYNTAX INTEGER (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval value, the range is from 1 to 32767 seconds."
::= { swL2LoopDetectCtrl 2 }
swL2LoopDetectRecoverTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the recover time, the range is from 60 to 1000000.
The value of 0 disables the recover function."
::= { swL2LoopDetectCtrl 3 }
swL2LoopDetectMode OBJECT-TYPE
SYNTAX INTEGER {
vlan-based(1),
port-based(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection mode for the system."
::= { swL2LoopDetectCtrl 4 }
swL2LoopDetectTrapMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
loop_detected(2),
loop_cleared(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection trap mode for the system."
::= { swL2LoopDetectCtrl 5 }
-- ----------------------------------------------------------------------------
swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 }
swL2LoopDetectPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
::= { swL2LoopDetectPortMgmt 1 }
swL2LoopDetectPortEntry OBJECT-TYPE
SYNTAX SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
INDEX { swL2LoopDetectPortIndex }
::= { swL2LoopDetectPortTable 1 }
SwL2LoopDetectPortEntry ::=
SEQUENCE {
swL2LoopDetectPortIndex
INTEGER,
swL2LoopDetectPortState
INTEGER,
swL2LoopDetectPortLoopVLAN
DisplayString,
swL2LoopDetectPortLoopStatus
INTEGER
}
swL2LoopDetectPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module"
::= { swL2LoopDetectPortEntry 1 }
swL2LoopDetectPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection function state on the port."
::= { swL2LoopDetectPortEntry 2 }
swL2LoopDetectPortLoopVLAN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN list that has detected a loopback."
::= { swL2LoopDetectPortEntry 3 }
swL2LoopDetectPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
loop(2),
error(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port status."
::= { swL2LoopDetectPortEntry 4 }
-- -----------------------------------------------------------------------------
-- Layer 2 Trap
-- -----------------------------------------------------------------------------
swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 }
swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 }
swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
-- -----------------------------------------------------------------------------
-- swL2NotifyMgmt
-- -----------------------------------------------------------------------------
swL2macNotificationSeverity OBJECT-TYPE
SYNTAX AgentNotifyLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the level of macNotification detection."
::= { swL2NotifyMgmt 1 }
swL2PortSecurityViolationSeverity OBJECT-TYPE
SYNTAX AgentNotifyLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the level of PortSecurityViolation detection."
::= { swL2NotifyMgmt 2 }
-- -----------------------------------------------------------------------------
-- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
-- -----------------------------------------------------------------------------
swL2macNotification NOTIFICATION-TYPE
OBJECTS {
swL2macNotifyInfo
}
STATUS current
DESCRIPTION
" This trap indicates the MAC addresses variation in address table . "
::= { swL2NotifFirmware 1 }
swL2PortSecurityViolationTrap NOTIFICATION-TYPE
OBJECTS {
swL2PortSecurityPortIndex,
swL2PortSecurityViolationMac
}
STATUS current
DESCRIPTION
"When the port_security trap is enabled, new MAC addresses that violate
the pre-defined port security configuration will trigger trap messages
to be sent out."
::= { swL2NotifFirmware 2 }
swL2PortLoopOccurred NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when Port loop occurred."
::={swL2NotifFirmware 3}
swL2PortLoopRestart NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when Port loop restart after interval time."
::={swL2NotifFirmware 4}
swL2VlanLoopOccurred NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex,
swL2VlanLoopDetectVID
}
STATUS current
DESCRIPTION
"The trap is sent when Port with VID loop occurred."
::={swL2NotifFirmware 5}
swL2VlanLoopRestart NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex,
swL2VlanLoopDetectVID
}
STATUS current
DESCRIPTION
"The trap is sent when Port with VID loop restart after interval time."
::={swL2NotifFirmware 6}
-- -----------------------------------------------------------------------------
-- notificationBidings
-- -----------------------------------------------------------------------------
swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 }
swL2macNotifyInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last time reboot information."
::= { swl2NotificationBidings 1 }
swL2PortSecurityViolationMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the MAC address that violates the port security configuration."
::= { swl2NotificationBidings 2 }
swL2VlanLoopDetectVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the VID that has detected a loopback."
::= { swl2NotificationBidings 3 }
-- ********************************************************************
-- swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
-- ********************************************************************
swL2DhcpLocalRelayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the DHCP local relay
function of the switch."
::= { swL2DhcpLocalRelayMgmt 1 }
swL2DhcpLocalRelayVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DhcpLocalRelayVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the DHCP local relay status
for each VLAN."
::={ swL2DhcpLocalRelayMgmt 2}
swL2DhcpLocalRelayVLANEntry OBJECT-TYPE
SYNTAX SwL2DhcpLocalRelayVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object lists the current VLANs in the switch and their
corresponding DHCP local relay status."
INDEX { swL2DhcpLocalRelayVLANID }
::={ swL2DhcpLocalRelayVLANTable 1 }
SwL2DhcpLocalRelayVLANEntry ::=
SEQUENCE{
swL2DhcpLocalRelayVLANID
INTEGER,
swL2DhcpLocalRelayVLANState
INTEGER
}
swL2DhcpLocalRelayVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the VIDs of the current VLANS in the switch."
::= { swL2DhcpLocalRelayVLANEntry 1 }
swL2DhcpLocalRelayVLANState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the DHCP relay function
of the VLAN."
::= { swL2DhcpLocalRelayVLANEntry 2 }
-- ********************************************************************
-- swL2PPPoEMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 25 }
-- ********************************************************************
swL2PPPoECirIDinsertState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the PPPoE circuit ID
insertion state of the switch."
::= { swL2PPPoEMgmt 1 }
END
View Git Blame Copy Permalink