WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DES3200-52-L2MGMT-MIB

6104 lines
212 KiB
Plaintext
Raw Permalink Blame History

-- -----------------------------------------------------------------------------
-- xxxx-L2MGMT-MIB
-- -----------------------------------------------------------------------------
-- Version 2.28
-- 2010/6/3
-- Request By Wenxia Yang for project DGS3600
-- [Modification]
-- Add swL2PortJumboFrameCtrlTable to configure the jumbo frame state on ports.
-- -----------------------------------------------------------------------------
-- Version 2.27
-- 2009/11/9
-- Request By Jok for project DGS3600 R2.52.
-- [Modification]
-- add swL2MirrorGroupTable to support multiple mirror session.
-- -----------------------------------------------------------------------------
-- Version 2.26
-- 2009/9/1
-- Requset By Oran Tang for project DES3810
-- [Modification]
-- Replace binding object "swL2PortSecurityPortIndex" with "swPortSecPortIndex".
-- -----------------------------------------------------------------------------
-- Version 2.25
-- 2009/3/23
-- Requset By Elise Ren for project DES3710
-- [Modification]
-- add value lists "l4-source-port(8)", "l4-destination-port(9)",
-- and "l4-source-dest-port(10)" in swL2TrunkAlgorithm.
-- For support trunk loading sharing algorithm hash key base on TCP/UDP port.
-- -----------------------------------------------------------------------------
-- Version 2.24
-- 2008/12/1
-- Requset By Rick Ou for project DGS3700
-- [New Object]
-- add swL2NniGvrpBpduAddress
-- -----------------------------------------------------------------------------
--Version 2.23
--2008/9/25
--Request By Tina for project DGS3400,Synchronize from Qos.mib.
--add swL2QOSBandwidthRadiusRxRate, swL2QOSBandwidthRadiusTxRate
-- and swL2QOS8021pRadiusPriority.
-- ----------------------------------------------------------------------------
--Version 2.22
--2008/9/16
--Request By Wesley Wang for project DGS3400
--[New Object]
--add swL2LoopDetectTrapMode
-- -----------------------------------------------------------------------------
--Version 2.21
--2008/8/31
--Request By Vic Li for project DGS3700
--[New Object]
--
--add swL2IGMPVlanDroppedByMaxGroupLimitation, swL2IGMPVlanDroppedByGroupFilter
-- in swL2IGMPVlanCounterInfoTable ;
--add swL2IGMPPortDroppedByMaxGroupLimitation and swL2IGMPPortDroppedByGroupFilter
-- in swL2IGMPPortCounterInfoTable ;
-- -----------------------------------------------------------------------------
--Version 2.20
--2008/8/13
--Request By Vic Li for project DGS3700
--[New Object]
--
--add swL2IGMPRateLimit, swL2IGMPReportSuppression in swL2IGMPCtrlTable ;
--add swL2IGMPQueryIPAddress and swL2IGMPQueryExpiryTime in swL2IGMPQueryInfoTable ;
--add swIGMPSnoopingGroupStaticMemberPorts in swIGMPSnoopingGroupTable;
--add swL2IGMPCountrInfoMgmt;
--add swL2IGMPDynIPMultCtrlTable in swL2IGMPDynIpMultMgmt;
--add swL2IGMPRouterIPAddressTable and swL2IGMPSnoopingStaticGroupTable;
--obsolete swL2IGMPInfoQueryCount and swL2IGMPInfoTxQueryCount in swL2IGMPQueryInfoTable ;
--obsolete swL2IGMPHostTimeout, swL2IGMPRouteTimeout and swL2IGMPLeaveTimer
-- in swL2IGMPCtrlTable;
-- -----------------------------------------------------------------------------
-- Version 2.19,2008/08/13,Green Zhu,Synchronize from L2mgmtDes30xxp
-- add swL2IGMPAccessAuthTable
-- add swL2TrunkVLANTable
-- add swL2DevCtrlVLANTrunkState
-- -----------------------------------------------------------------------------
-- Version 2.18
-- 2008/7/29
-- Request By Grape Pu for project DGS3600
-- 1.add swL2PortAutoNegInfoTable
-- 2.add swL2PortCtrlAutoNegRestart and swL2PortCtrlAutoNegCapAdvertisedBits in swL2PortCtrlTable
-- 3.add swL2PortDropCounterTable
-- -----------------------------------------------------------------------------
-- Version 2.17, 2008/07/07, Marco Visaya
-- added swL2IGMPDynIPMultVlanState
-- added swL2IGMPDynIPMultVlanAge
-- added swIGMPSnoopingGroupReportCount
-- added swIGMPSnoopingGroupUpTime
-- added swIGMPSnoopingGroupExpiryTime
-- added swIGMPSnoopingGroupRouterPorts
-- added swL2IGMPDynIpMultMgmt
-- -----------------------------------------------------------------------------
-- Version 2.16
-- 2008/6/2
-- Request By Kelvin Tao for project DGS3700
-- [New Object]
-- 1.add swL2DevCtrlCFM.
-- 2.add swL2DevCtrlIpAutoconfig.
-- -----------------------------------------------------------------------------
--Version 2.15
--2008/4/17
--Request By Jeffers yang for project DHS3628GF
--[New Object]
--add swL2IGMPMulticastVlanUntagSourcePort and swL2IGMPMulticastVlanRemapPriority
--and swL2IGMPMulticastVlanReplacePriority in swL2IGMPMulticastVlanTable
-- -----------------------------------------------------------------------------
-- Version 2.14
-- 2008/4/1
-- Request By Kelvin Tao for project DGS3700
-- [New Object]
-- add swL2SubnetVLANTable and swL2VlanPrecedenceTable
-- -----------------------------------------------------------------------------
-- Version 2.13
-- 2008/3/27
-- Request By Vic Li for project DES30xxR4.2
-- [New Object]
-- add object swL2PortCtrlMDIXState in swL2PortCtrlTable
-- -----------------------------------------------------------------------------
-- Version 2.12
-- 2008/3/7
-- Request By Kelvin Tao for project DGS3700
-- [New Object]
-- add swL2LimitedMulticastFilterVIDTable and swL2MulticastFilterVIDMaxGroupTable
-- -----------------------------------------------------------------------------
-- Version 2.11
-- 2008/2/19
-- Request By Green Zhu for project DGS3200-16
-- Add swIGMPSnoopingGroupTable and obsolete swL2IGMPInfoTable
-- -----------------------------------------------------------------------------
-- Version 2.10
-- 2007/12/29
-- Request By Jeffers for project DGS34xxR2.3
-- for implement trap/log in loopback detection.
-- add object swL2PortLoopOccurred,swL2PortLoopRestart,swL2VlanLoopOccurred
-- swL2VlanLoopRestart and swL2VlanLoopDetectVID
-- -----------------------------------------------------------------------------
-- Version 2.09
-- 2007/12/18
-- Request By Jeffers for project DGS3600R2.4
-- add object swL2DevCtrlLLDPForwardMessageState
-- -----------------------------------------------------------------------------
-- Version 2.08
-- 2007/11/14
-- Request By Kelvin Tao for project DGS32xxR1.1
-- add swL2IGMPGroupMode in swL2IGMPInfoTable;
-- Remove swL2IGMPTotalSource from swL2IGMPInfoTable;
-- -----------------------------------------------------------------------------
-- Version 2.07
-- 2007/11/6
-- Request By Kelvin Tao for project DGS32xxR1.1
-- [New Object]
-- (a)add swL2IGMPQueryVersion in swL2IGMPCtrlTable;
-- (b)add swL2IGMPVersion and swL2IGMPTotalSource in swL2IGMPInfoTable;
-- (c)add swL2IGMPv3Table.
-- -----------------------------------------------------------------------------
-- Version 2.06
-- 2007/11/1
-- Request By Green Zhu for project DGS32xxR1.1
-- [New Object]
-- add swL2VlanPortInfoTable
-- -----------------------------------------------------------------------------
-- Version 2.05
-- 2007/09/18
-- Request By Yan Zhang for project DES3400, DHS3628 and DES3200.
-- [New Object]
-- (a)add object swL2IGMPSnoopingMulticastVlanState;
-- (b)add swL2IGMPMulticastVlanTable and swL2IGMPMulticastVlanGroupTable;
-- (c)add swL2MulticastFilterMode, swL2MulticastFilterModeVlanTable and
-- swL2MulticastFilterModePortTable;
-- (d)add swL2MulticastFilterProfileTable, swL2MulticastFilterProfileAddressTable,
-- swL2LimitedMulticastFilterPortTable and swL2MulticastFilterPortMaxGroupTable;
-- (e)add objects swL2DevCtrlLLDPState and swL2PVIDAutoAssignmentState.
-- -----------------------------------------------------------------------------
-- Version 2.04
-- 2007/05/22
-- Request By Jenny Zeng for project DES3400
-- (a)add swL2DevCtrlWeb, swL2DevCtrlWebState, swL2DevCtrlWebTcpPort;
-- (b)add swL2TrunkLACPPortTable;
-- (c)add swL2DevCtrlSnmpTrapState;
-- (d)add swL2PortCounterCtrlTable;
-- (e)add swL2PortErrTable;
-- (f)add swL2PortSecurityEntryClearCtrl in table swL2PortSecurityControlTable;
-- (g)add swL2DevCtrlIGMPSnoopingMcstRTOnly. V
-- -----------------------------------------------------------------------------
-- Version 2.03
-- 2006/10/26
-- add swL2VLANMgmt for new feature request(Leander Chang):
-- advertisement control of VALN
-- -----------------------------------------------------------------------------
-- Version 2.02
-- 2006/10/16 (reported from Yan Zhang/CD/CN/Alphanetworks)
-- add object swL2StpForwardBPDU, swL2StpLbd, swL2StpLbdRecoverTime.
-- add table swL2StpPortTable, swL2CosPriorityTable, swL2CosPortPRITable, swL2CosMacBasePRITable
-- for implement trap/log in mac notify and stp loop.
-- -----------------------------------------------------------------------------
-- Version 2.01
-- 2006/7/7
-- added object swL2LimitedMulticastResetPort
-- -----------------------------------------------------------------------------
-- Version 2.00
-- 2006/6/30
-- rearrange the MIB that base on PX and DES3526.
-- -----------------------------------------------------------------------------
-- Version 1.3
-- 2005/12/27
-- added object swL2PortCtrlJumboFrameMaxSize
-- -----------------------------------------------------------------------------
-- Version 1.2
-- 2005/11/11 11:36
-- for implement trap/log in port security violation.
-- add object swL2PortSecurityTrapLogState, swL2PortSecurityViolationMac ,swL2PortSecurityViolationTrap
-- -----------------------------------------------------------------------------
-- Version 1.1
-- 2005/9/12 10:04
-- add swL2PortInfoMediumType in swL2PortInfoTable and
-- add swL2PortCtrlMediumType in swL2PortCtrlTable
-- add swL2PortCtrlJumboFrame
-- -----------------------------------------------------------------------------
-- Version 1.02
-- 2005/4/8 04:31PM
-- By Scott Slong
-- Add swL2DevCtrlManagementVlanId
-- -----------------------------------------------------------------------------
-- Version 1.01
-- 2004/9/21 04:31PM
-- By Karen Huang
-- Add swL2PortCableDiagnosisTable
-- -----------------------------------------------------------------------------
-- Version 1.00
-- Remove swDevInfoSystemUptime, swDevInfoConsoleInuse,swL2DevCtrlUpDownloadState,swDevInfoSaveCfg
-- Remove swL2DevCtrlUpDownloadImageFileName ,swL2DevCtrlUpDownloadImageSourceAddr
-- Remove swL2DevCtrlUpDownloadImage , swL2DevCtrlSaveCfg
-- -----------------------------------------------------------------------------
-- Version 0.02
-- 2002/07/30
-- By Tommy Wang
-- Renamed to DXxxxxx-MIB
-- Add swL2TrafficMgmt
-- Modified swL2DevCtrl
-- Removed swL2PortStTable
-- Removed swL2PortCtrlEntry->swL2PortCtrlBackPressState and
-- swL2PortCtrlBMStromthreshold
-- Modified swL2MirrorMgmt
-- Removed swL2FilterAddrVid
-- Modified swL2IGMPCtrlTable
-- Removed swL2PriorityMgmt
-- Modified swL2TrunkMasterPortIndex MAX-ACCESS read-only to read-write
-- Add swL2IGMPCtrState for invalid(4)
-- Modified swL2PortInfoType
-- Removed swDevInfoFrontPanelLedStatus about RPS and modified its SIZE
--
-- -----------------------------------------------------------------------------
-- Version 0.01
-- 2000/07/03
-- By Chrissy Chen
-- Removed swL2PortTxPrioQueueCtrlTable
-- Modified swL2PortCtrlBMStromPercentage to swL2PortCtrlBMStromthreshold
--
-- -----------------------------------------------------------------------------
DES3200-52-L2MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress , TimeTicks , Integer32, Unsigned32,
MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI
DisplayString,RowStatus,TruthValue FROM SNMPv2-TC
Counter FROM RFC1155-SMI
--PortList FROM Q-BRIDGE-MIB
AgentNotifyLevel FROM DLINK-ID-REC-MIB
TEXTUAL-CONVENTION
FROM SNMPv2-TC
des3200-52-cx FROM SWPRIMGMT-DES3200-MIB
swPortSecPortIndex FROM PORT-SECURITY-MIB;
swL2MgmtMIB MODULE-IDENTITY
LAST-UPDATED "201006030000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
"http://support.dlink.com"
DESCRIPTION
"The Structure of Layer 2 Network Management Information."
::= { des3200-52-cx 2 }
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-- in the
-- "canonical"
-- order, copy from RFC1493
VlanId ::= INTEGER (1..4094)
PortList ::= OCTET STRING(SIZE (0..127))
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
swL2LoopDetectMgmt OBJECT IDENTIFIER::= { swL2MgmtMIB 18 }
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 }
--
-- ***********************************************************
--
-- Textual Conventions
--
-- ***********************************************************
IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used as the syntax of the
swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and
swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable."
REFERENCE
"[IEEE802.3], Section 30.6.1.1.5"
SYNTAX BITS{
bOther(0), -- other or unknown
b10baseT(1), -- 10BASE-T half duplex mode
b10baseTFD(2), -- 10BASE-T full duplex mode
b100baseT4(3), -- 100BASE-T4
b100baseTX(4), -- 100BASE-TX half duplex mode
b100baseTXFD(5), -- 100BASE-TX full duplex mode
b100baseT2(6), -- 100BASE-T2 half duplex mode
b100baseT2FD(7), -- 100BASE-T2 full duplex mode
bFdxPause(8), -- PAUSE for full-duplex links
bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
-- links
bFdxSPause(10), -- Symmetric PAUSE for full-duplex
-- links
bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
-- full-duplex links
b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
-- duplex mode
b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
-- duplex mode
b1000baseT(14), -- 1000BASE-T half duplex mode
b1000baseTFD(15) -- 1000BASE-T full duplex mode
}
-- -----------------------------------------------------------------------------
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
-- -----------------------------------------------------------------------------
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
swDevInfoTotalNumOfPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports within this switch. This value is the sum
of the ports within this switch."
::= { swL2DevInfo 1 }
swDevInfoNumOfPortInUse OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports in this switch connected to the segment or
the end stations."
::= { swL2DevInfo 2 }
swDevModuleInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwDevModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the module information."
::= { swL2DevInfo 3 }
swDevInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indications. The first two
octets indicate the LED PoE mode.
01 02 = PoE Mode
02 01 = Normal Mode
00 00 = Non-PoE Device
The next two are defined as system LED.
The third octet is power LED.
0x01 : Power Off
0x02 : Power On
the forth octet is console led:
0x01 = system start up
0x02 = a user is login through console
0x03 = no user is login through console
The fifth octect is RPS (Redundancy Power Supply) LED.
0x01 = Ineternal Power working
0x02 = External Power working
The sixth octect is FAN LED
0x01 = Fan LED Off
0x02 = Fan LED blinking
The other octets following are the logical port LED
(following dot1dBasePort ordering). Every two bytes are presented to a port.
The first byte is presentd to the Link/Activity LED. The second byte is
presented to the Speed LED.
Link/Activity LED:
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED:
Normal Mode
bit 4 :
0 = copper link up (if link fail will show 0)
1 = fibber link up
bit 2-0 :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
04 = 10000Mbps
POE mode:
01 = no PD connected.
02 = no deliver power to PD.
03 = deliver power to PD."
::= { swL2DevInfo 4 }
swDevModuleInfoEntry OBJECT-TYPE
SYNTAX SwDevModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of management information for each unit in the system."
-- INDEX { swDevModuleInfoUnitID, swDevModuleInfoModuleID }
INDEX { swDevModuleInfoUnitID }
::= { swDevModuleInfoTable 1}
SwDevModuleInfoEntry ::=
SEQUENCE {
swDevModuleInfoUnitID
INTEGER,
-- swDevModuleInfoModuleID
-- INTEGER,
swDevModuleInfoModuleName
DisplayString,
swDevModuleInfoReversion
DisplayString,
swDevModuleInfoSerial
DisplayString,
swDevModuleInfoDescription
DisplayString
}
swDevModuleInfoUnitID OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the specific unit ID in the stacking/chassis
table."
::= { swDevModuleInfoEntry 1 }
-- swDevModuleInfoModuleID OBJECT-TYPE
-- SYNTAX INTEGER (1..4)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This object indicates the module ID of this unit."
-- ::= { swDevModuleInfoEntry 2 }
swDevModuleInfoModuleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text string containing the name of the module. "
::= { swDevModuleInfoEntry 3 }
swDevModuleInfoReversion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text string containing the version (name or number) of the module."
::= { swDevModuleInfoEntry 4 }
swDevModuleInfoSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text string containing the serial number or serial name of the module."
::= { swDevModuleInfoEntry 5 }
swDevModuleInfoDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text string containing a description of the
module. "
::= { swDevModuleInfoEntry 6 }
-- -----------------------------------------------------------------------------
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
swL2DevCtrlStpState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enable or disable the spanning tree algorithm during
the runtime of the system."
::= { swL2DevCtrl 1 }
swL2DevCtrlIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the layer 2 Internet Group Management
Protocol (IGMP) capture function is enabled or disabled."
::= { swL2DevCtrl 2 }
swL2DevCtrlIGMPSnoopingMcstRTOnly OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the IGMP snooping forward multicast routing only state."
::= { swL2DevCtrl 3 }
swL2DevCtrlRmonState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enable or disable RMON."
::= { swL2DevCtrl 4 }
swL2DevCtrlSnmpTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the SNMP trap status."
::= { swL2DevCtrl 5 }
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the object is set to active, all statistical counters will
be cleared. If set to normal, no action will occur."
::= { swL2DevCtrl 6 }
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID to which the Dot1dTpFdbTable belongs;
The default value is the DEFAULT_VLAN_ID of the system."
::= { swL2DevCtrl 7 }
swL2MACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enable or disable MAC Notification."
::= { swL2DevCtrl 8 }
swL2MACNotifyHistorySize OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the history size of MAC addresses in the MAC Address table.
The default value is 1."
::= { swL2DevCtrl 9 }
swL2MACNotifyInterval OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the time interval, in seconds, that will trigger
MAC notification messages."
::= { swL2DevCtrl 10 }
swL2DevCtrlAsymVlanState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables asymmetric VLANs
during the runtime of the system."
::= { swL2DevCtrl 13 }
-- -----------------------------------------------------------------------------
swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 }
swL2DevCtrlTelnetState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the Telnet status."
::= { swL2DevCtrlTelnet 1 }
swL2DevCtrlTelnetTcpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object designates TCP ports.
When Telnet is disabled, this object is not accessible."
::= { swL2DevCtrlTelnet 2 }
-- -----------------------------------------------------------------------------
swL2DevCtrlManagementVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls which previously created VLANs are included
in the System IP Interface."
::= { swL2DevCtrl 16 }
-- -----------------------------------------------------------------------------
swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 17 }
swL2DevCtrlWebState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the Web status."
::= { swL2DevCtrlWeb 1 }
swL2DevCtrlWebTcpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object designates TCP ports.
When Web is disabled, this object is not accessible."
::= { swL2DevCtrlWeb 2 }
swL2DevCtrlLLDPState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the state of the LLDP function.
When this function is enabled, the switch can start to transmit
LLDP packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port
LLDP setting.
For the advertisement of LLDP packets, the switch announces the
information to its neighbor through ports. For receiving
LLDP packets, the switch will learn the information from the LLDP
packets advertised from the neighbor in the neighbor table.
"
::= { swL2DevCtrl 18 }
swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When lldp is disabled and lldp forward_message's are enabled, the
LLDP Data Unit packets received by the switch will be forwarded. "
DEFVAL {disabled}
::={swL2DevCtrl 19}
swL2DevCtrlIpAutoconfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the IP auto configuration state."
::= { swL2DevCtrl 20 }
-- -----------------------------------------------------------------------------
swL2DevCtrlCFM OBJECT IDENTIFIER ::= { swL2DevCtrl 21 }
swL2DevCtrlCFMState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the CFM global state."
::={swL2DevCtrlCFM 1}
swL2DevCtrlCFMPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DevCtrlCFMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the CFM state of specified ports."
::= { swL2DevCtrlCFM 2 }
swL2DevCtrlCFMPortEntry OBJECT-TYPE
SYNTAX SwL2DevCtrlCFMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the CFM state on specified ports."
INDEX { swL2DevCtrlCFMPortIndex }
::= { swL2DevCtrlCFMPortTable 1 }
SwL2DevCtrlCFMPortEntry ::=
SEQUENCE {
swL2DevCtrlCFMPortIndex
INTEGER,
swL2DevCtrlCFMPortState
INTEGER
}
swL2DevCtrlCFMPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the port number."
::= { swL2DevCtrlCFMPortEntry 1 }
swL2DevCtrlCFMPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the CFM state by port."
::= { swL2DevCtrlCFMPortEntry 2 }
swL2DevCtrlVLANTrunkState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the global state of the VLAN trunking feature of the device."
::={swL2DevCtrl 22}
-- -----------------------------------------------------------------------------
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
swL2DevAlarmNewRoot OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the device has become the new root of the Spanning Tree,
this object decides whether to send a new root trap."
::= { swL2DevAlarm 1 }
swL2DevAlarmTopologyChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when
the switch topology changes. If the object is enabled (3), the Topology Change
trap is sent by the device when any of its configured ports transition from
the Learning state to the Forwarding state, or from the Forwarding state to
the Blocking state. For the same port transition, the device does not send the
trap if this object value is disabled or in another state."
::= { swL2DevAlarm 2 }
swL2DevAlarmLinkChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when the link
changes. If the object is enabled (3), the Link Change trap is sent by
the device when any of its port links change. The device does not send the
trap if this object value is disabled or in another state."
::= { swL2DevAlarm 3 }
-- -----------------------------------------------------------------------------
-- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
-- -----------------------------------------------------------------------------
swL2VlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { swL2VLANMgmt 1 }
swL2VlanStaticEntry OBJECT-TYPE
SYNTAX SwL2VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into this
device by (local or network) management."
INDEX { swL2VlanIndex }
::= { swL2VlanStaticTable 1 }
SwL2VlanStaticEntry ::=
SEQUENCE {
swL2VlanIndex
VlanId,
swL2VLANAdvertisement
INTEGER
}
swL2VlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { swL2VlanStaticEntry 1 }
swL2VLANAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the advertisement is active or not."
::= { swL2VlanStaticEntry 2 }
swL2PVIDAutoAssignmentState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the PVID auto assignment state.
If 'Auto-assign PVID' is disabled, the PVID can only be changed
by PVID configuration (user changes explicitly). The VLAN
configuration will not automatically change the PVID.
If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures
a port to VLAN X's untagged membership, this port's PVID
will be updated with VLAN X. Using the VLAN list command,
PVID is updated as the last item of the VLAN list. When a user removes
a port from the untagged membership of the PVID's VLAN, the
port's PVID will be assigned 'default VLAN'."
::= { swL2VLANMgmt 2 }
swL2VlanPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the VLAN and port role information of each port."
::= { swL2VLANMgmt 3 }
swL2VlanPortInfoEntry OBJECT-TYPE
SYNTAX SwL2VlanPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry of VLAN port information."
INDEX { swL2VlanPortInfoPortIndex,swL2VlanPortInfoVid }
::= { swL2VlanPortInfoTable 1 }
SwL2VlanPortInfoEntry ::=
SEQUENCE {
swL2VlanPortInfoPortIndex
INTEGER,
swL2VlanPortInfoVid
VlanId,
swL2VlanPortInfoPortRole
INTEGER
}
swL2VlanPortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { swL2VlanPortInfoEntry 1 }
swL2VlanPortInfoVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID assigned to a special port"
::= { swL2VlanPortInfoEntry 2 }
swL2VlanPortInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
other(1),
untagged(2),
tagged(3),
dynamic(4),
forbidden(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN."
::= { swL2VlanPortInfoEntry 3 }
swL2SubnetVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2SubnetVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the subnet VLAN information."
::= { swL2VLANMgmt 4 }
swL2SubnetVLANEntry OBJECT-TYPE
SYNTAX SwL2SubnetVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of subnet VLAN information."
INDEX { swL2SubnetVLANIPAddress,swL2SubnetVLANIPMask }
::= { swL2SubnetVLANTable 1 }
SwL2SubnetVLANEntry ::=
SEQUENCE {
swL2SubnetVLANIPAddress
IpAddress,
swL2SubnetVLANIPMask
IpAddress,
swL2SubnetVLANID
VlanId,
swL2SubnetVLANPriority
INTEGER,
swL2SubnetVLANRowStatus
RowStatus
}
swL2SubnetVLANIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IP address."
::= { swL2SubnetVLANEntry 1 }
swL2SubnetVLANIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IP mask."
::= { swL2SubnetVLANEntry 2 }
swL2SubnetVLANID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN ID."
::= { swL2SubnetVLANEntry 3 }
swL2SubnetVLANPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the priority."
::= { swL2SubnetVLANEntry 4 }
swL2SubnetVLANRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2SubnetVLANEntry 5 }
swL2VlanPrecedenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanPrecedenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the VLAN classification precedence information of each port."
::= { swL2VLANMgmt 5 }
swL2VlanPrecedenceEntry OBJECT-TYPE
SYNTAX SwL2VlanPrecedenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of VLAN classification precedence information."
INDEX { swL2VlanPrecedencePortIndex }
::= { swL2VlanPrecedenceTable 1 }
SwL2VlanPrecedenceEntry ::=
SEQUENCE {
swL2VlanPrecedencePortIndex
INTEGER,
swL2VlanPrecedenceClassification
INTEGER
}
swL2VlanPrecedencePortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { swL2VlanPrecedenceEntry 1 }
swL2VlanPrecedenceClassification OBJECT-TYPE
SYNTAX INTEGER{
mac-based(1),
subnet-based(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VLAN classification precedence."
::= { swL2VlanPrecedenceEntry 2 }
swL2NniGvrpBpduAddress OBJECT-TYPE
SYNTAX INTEGER {
dot1d(1),
dot1ad(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status."
::= { swL2VLANMgmt 6 }
-- -----------------------------------------------------------------------------
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
-- -----------------------------------------------------------------------------
swL2PortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every port."
::= { swL2PortMgmt 1 }
swL2PortInfoEntry OBJECT-TYPE
SYNTAX SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port of the device."
INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType }
::= { swL2PortInfoTable 1 }
SwL2PortInfoEntry ::=
SEQUENCE {
swL2PortInfoPortIndex
INTEGER,
swL2PortInfoMediumType
INTEGER,
swL2PortInfoUnitID
INTEGER,
swL2PortInfoType
INTEGER,
swL2PortInfoLinkStatus
INTEGER,
swL2PortInfoNwayStatus
INTEGER,
swL2PortInfoModuleType
INTEGER,
swL2PortInfoErrorDisabled
INTEGER
}
swL2PortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortInfoEntry 1 }
swL2PortInfoMediumType OBJECT-TYPE
SYNTAX INTEGER{
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the medium type of the port number."
::={swL2PortInfoEntry 2}
swL2PortInfoUnitID OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the unit in the system."
::= { swL2PortInfoEntry 3 }
swL2PortInfoType OBJECT-TYPE
SYNTAX INTEGER {
portType-100Base-TX(1),
portType-100Base-FX(2),
portType-100Base-FL(3),
portType-1000Base-TX(4),
portType-1000Base-SX(5),
portType-1000Base-LX(6),
portType-1000Base-SX-GBIC(7),
portType-1000Base-LX-GBIC(8),
portType-1000Base-TX-GBIC(9),
portType-1000Base-1394(10),
portType-1000Base-TX-GBIC-COMBO(11),
portType-1000Base-none-GBIC(12),
portType-1000Base-SX-MGBIC(13),
portType-1000Base-LX-MGBIC(14),
portType-1000Base-TX-MGBIC(15),
portType-1000Base-none-MGBIC(16),
portType-SIO(17),
portType-10G(18),
portType-10G-xenpak-1310nm(19),
portType-10G-xenpak-850nm(20),
portType-10G-xenpak-empty(21),
portType-10G-xfp-1310nm(22),
portType-10G-xfp-850nm(23),
portType-10G-xfp-empty(24),
portType-none(25)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the connector type of this port."
::= { swL2PortInfoEntry 4 }
swL2PortInfoLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
link-pass(2),
link-fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port link status."
::= { swL2PortInfoEntry 5 }
swL2PortInfoNwayStatus OBJECT-TYPE
SYNTAX INTEGER {
other(0),
empty(1),
link-down(2),
half-10Mbps(3),
full-10Mbps(4),
half-100Mbps(5),
full-100Mbps(6),
half-1Gigabps(7),
full-1Gigabps(8),
full-10Gigabps(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port speed and duplex mode."
::= { swL2PortInfoEntry 6 }
swL2PortInfoModuleType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
moduleType-COMBO(1),
moduleType-1394(2),
moduleType-1000T(3),
moduleType-MGBIC(4),
moduleType-1P-SC-SX(5),
moduleType-2P-SC-SX(6),
moduleType-1P-SC-LX(7),
moduleType-2P-SC-LX(8),
moduleType-1P-TX(9),
moduleType-2P-TX(10),
moduleType-1P-MTRJ-SX(11),
moduleType-2P-MTRJ-SX(12),
moduleType-1P-MTRJ-LX(13),
moduleType-2P-MTRJ-LX(14),
moduleType-1P-GBIC(15),
moduleType-2P-GBIC(16),
moduleType-1P-GBIC-1P-TX(17),
moduleType-1P-GBIC-1P-STACK(18),
moduleType-2P-STACK(19),
moduleType-2P-100FX(20),
moduleType-1P-100FX(21),
moduleType-2P-100FX-NEW(22),
moduleType-1P-100FL(23),
moduleType-2P-100FL(24),
moduleType-2P-100TX(25),
moduleType-BaseModule-24PORT(26)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module type of this port."
::= { swL2PortInfoEntry 7 }
swL2PortInfoErrorDisabled OBJECT-TYPE
SYNTAX INTEGER {
none(0),
storm(1),
stp-lbd(2),
unknow(3),
ctp-lbd(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the blocking type of this port."
::= { swL2PortInfoEntry 8 }
-- -----------------------------------------------------------------------------
swL2PortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains control information about every port."
::= { swL2PortMgmt 2 }
swL2PortCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of control information for each port on the device."
INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType}
::= { swL2PortCtrlTable 1 }
SwL2PortCtrlEntry ::=
SEQUENCE {
swL2PortCtrlPortIndex
INTEGER,
swL2PortCtrlMediumType
INTEGER,
swL2PortCtrlUnitIndex
INTEGER,
swL2PortCtrlAdminState
INTEGER,
swL2PortCtrlNwayState
INTEGER,
swL2PortCtrlFlowCtrlState
INTEGER,
swL2PortCtrlLearningState
INTEGER,
swL2PortCtrlMACNotifyState
INTEGER,
-- swL2PortCtrlMulticastfilter
-- INTEGER
swL2PortCtrlMDIXState
INTEGER,
swL2PortCtrlAutoNegRestart
INTEGER,
swL2PortCtrlAutoNegCapAdvertisedBits
IANAifMauAutoNegCapBits
}
swL2PortCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortCtrlEntry 1 }
swL2PortCtrlMediumType OBJECT-TYPE
SYNTAX INTEGER{
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the medium type of the port number."
::={ swL2PortCtrlEntry 2 }
swL2PortCtrlUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the unit in the device"
::= { swL2PortCtrlEntry 3 }
swL2PortCtrlAdminState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the port is enabled or disabled."
::= { swL2PortCtrlEntry 4 }
swL2PortCtrlNwayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nway-enabled(2),
nway-disabled-10Mbps-Half(3),
nway-disabled-10Mbps-Full(4),
nway-disabled-100Mbps-Half(5),
nway-disabled-100Mbps-Full(6),
nway-disabled-1Gigabps-Half(7),
nway-disabled-1Gigabps-Full(8),
nway-disabled-1Gigabps-Full-master(9),
nway-disabled-1Gigabps-Full-slave(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chose the port speed, duplex mode, and N-Way function mode."
::= { swL2PortCtrlEntry 5 }
swL2PortCtrlFlowCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, the IEEE 802.3x flow
control function sends PAUSE frames and receives PAUSE frames."
::= { swL2PortCtrlEntry 6 }
swL2PortCtrlLearningState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the port is locked or not."
::= { swL2PortCtrlEntry 7 }
swL2PortCtrlMACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets each port's MAC notification state."
::= { swL2PortCtrlEntry 8 }
-- swL2PortCtrlMulticastfilter OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(0),
-- forward-all-groups(1),
-- forward-unregistered-groups(2),
-- filter-unregistered-groups(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object controls the multicast port filtering mode for a specified port. "
-- ::= { swL2PortCtrlEntry 9 }
swL2PortCtrlMDIXState OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
normal(2),
cross(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the MDIX setting of the port."
::= { swL2PortCtrlEntry 10 }
swL2PortCtrlAutoNegRestart OBJECT-TYPE
SYNTAX INTEGER {
restart(1),
norestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the value of this object is set to restart(1) then this will force
auto-negotiation to begin link renegotiation. If auto-negotiation
signaling is disabled, a write to this object has no effect.
Setting the value of this object to norestart(2) has no effect."
REFERENCE "[IEEE802.3], 30.6.1.2.1,
acAutoNegRestartAutoConfig."
::= { swL2PortCtrlEntry 11}
swL2PortCtrlAutoNegCapAdvertisedBits OBJECT-TYPE
SYNTAX IANAifMauAutoNegCapBits
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that uniquely identifies the set of capabilities advertised
by the local auto-negotiation entity.
Capabilities in this object that are not available in
swL2PortAutoNegInfoCapabilityBits cannot be enabled.
Note that the local auto-negotiation entity may advertise some
capabilities beyond the scope of this MIB. This is indicated by
returning the bit value bOther in addition to any bit values for
standard capabilities that are listed in the
IANAifMauAutoNegCapBits TC."
REFERENCE "[IEEE802.3], 30.6.1.1.6,
aAutoNegAdvertisedTechnologyAbility."
::= { swL2PortCtrlEntry 12 }
swL2PortCtrlJumboFrame OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the switch's jumbo frame settings."
::= { swL2PortMgmt 3 }
swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes how many bytes the max jumbo frame is."
::= { swL2PortMgmt 4 }
swL2PortCableDiagnosisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains cable diagnostic information about every port."
::= { swL2PortMgmt 5 }
swL2PortCableDiagnosisEntry OBJECT-TYPE
SYNTAX SwL2PortCableDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list with cable diagnostic information for each port of the device."
INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex }
::= { swL2PortCableDiagnosisTable 1 }
SwL2PortCableDiagnosisEntry ::=
SEQUENCE {
swL2PortCableDiagnosisPortIndex
INTEGER,
swL2PortCableDiagnosisPairIndex
INTEGER,
swL2PortCableDiagnosisCableStatus
INTEGER,
swL2PortCableDiagnosisPairStatus
INTEGER,
swL2PortCableDiagnosisPairLength
INTEGER,
swL2PortCableDiagnosisPairLengthInaccuracy
INTEGER
}
swL2PortCableDiagnosisPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortCableDiagnosisEntry 1 }
swL2PortCableDiagnosisPairIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the pair index of each port.
Pair 1 means pin 3 and 6 of the connector.
Pair 2 means pin 1 and 2 of the connector.
Pair 3 means pin 7 and 8 of the connector.
Pair 4 means pin 4 and 5 of the connector."
::= { swL2PortCableDiagnosisEntry 2 }
swL2PortCableDiagnosisCableStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
open-short(3),
not-support(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the cable status."
::= { swL2PortCableDiagnosisEntry 3 }
swL2PortCableDiagnosisPairStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
open(1),
short(2),
fail(3),
not-supported(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status of the pair."
::= { swL2PortCableDiagnosisEntry 4 }
swL2PortCableDiagnosisPairLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the approx. length or length to failure of
the pair. The unit value is in meters."
::= { swL2PortCableDiagnosisEntry 5 }
swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the inaccuracy of a pair length. The unit value is in meters."
::= { swL2PortCableDiagnosisEntry 6 }
-- -----------------------------------------------------------------------------
-- swL2PortCounterCtrlTable
-- -----------------------------------------------------------------------------
swL2PortCounterCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that is used to clear counter information about every port."
::= { swL2PortMgmt 6 }
swL2PortCounterCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortCounterCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries used to clear the counter information for each port of the device."
INDEX { swL2PortCounterCtrlPortIndex }
::= { swL2PortCounterCtrlTable 1 }
SwL2PortCounterCtrlEntry ::=
SEQUENCE {
swL2PortCounterCtrlPortIndex
INTEGER,
swL2PortCounterClearCtrl
INTEGER
}
swL2PortCounterCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortCounterCtrlEntry 1 }
swL2PortCounterClearCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether to clear the counters for each port of the device or not."
::= { swL2PortCounterCtrlEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2PortErrTable
-- -----------------------------------------------------------------------------
swL2PortErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains error information for each port."
::= { swL2PortMgmt 7 }
swL2PortErrEntry OBJECT-TYPE
SYNTAX SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information regarding port errors on the device."
INDEX { swL2PortErrPortIndex }
::= { swL2PortErrTable 1 }
SwL2PortErrEntry ::=
SEQUENCE {
swL2PortErrPortIndex
INTEGER,
swL2PortErrPortState
INTEGER,
swL2PortErrPortConnStatus
INTEGER,
swL2PortErrPortReason
INTEGER
}
swL2PortErrPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)."
::= { swL2PortErrEntry 1 }
swL2PortErrPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the port state is enabled or disabled."
::= { swL2PortErrEntry 2 }
swL2PortErrPortConnStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the Port Status is err-disabled or not."
::= { swL2PortErrEntry 3 }
swL2PortErrPortReason OBJECT-TYPE
SYNTAX INTEGER {
stp-lbd(1),
storm-control(2),
ctp-lbd(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes if the reason for the port error is STP LBD or Storm control."
::= { swL2PortErrEntry 4 }
-- -----------------------------------------------------------------------------
-- swL2PortAutoNegInfoTable
-- -----------------------------------------------------------------------------
swL2PortAutoNegInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortAutoNegInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every port's auto negotiation status."
::= { swL2PortMgmt 8 }
swL2PortAutoNegInfoEntry OBJECT-TYPE
SYNTAX SwL2PortAutoNegInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port auto negotiation of the device."
INDEX { swL2PortAutoNegInfoPortIndex }
::= { swL2PortAutoNegInfoTable 1 }
SwL2PortAutoNegInfoEntry ::=
SEQUENCE {
swL2PortAutoNegInfoPortIndex
INTEGER,
swL2PortAutoNegInfoAdminStatus
INTEGER,
swL2PortAutoNegInfoCapabilityBits
IANAifMauAutoNegCapBits,
swL2PortAutoNegInfoCapAdvertisedBits
IANAifMauAutoNegCapBits,
swL2PortAutoNegInfoCapReceivedBits
IANAifMauAutoNegCapBits
}
swL2PortAutoNegInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortAutoNegInfoEntry 1 }
swL2PortAutoNegInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" If the value of this object is disabled(2) then the interface will act as
it would if it had no auto-negotiation signaling.
The status is affect by setting swL2PortCtrlNwayState."
REFERENCE "[IEEE802.3], 30.6.1.1.2, aAutoNegAdminState,
and 30.6.1.2.2, acAutoNegAdminControl."
::= { swL2PortAutoNegInfoEntry 2 }
swL2PortAutoNegInfoCapabilityBits OBJECT-TYPE
SYNTAX IANAifMauAutoNegCapBits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies the set of capabilities of the local
auto-negotiation entity. Note that interfaces that support this MIB may
have capabilities that extend beyond the scope of this MIB.
Note that the local auto-negotiation entity may support some capabilities
beyond the scope of this MIB. This is indicated by returning the bit value
bOther in addition to any bit values for standard capabilities that are listed
in the IANAifMauAutoNegCapBits TC."
REFERENCE "[IEEE802.3], 30.6.1.1.5,
aAutoNegLocalTechnologyAbility."
::= { swL2PortAutoNegInfoEntry 3 }
swL2PortAutoNegInfoCapAdvertisedBits OBJECT-TYPE
SYNTAX IANAifMauAutoNegCapBits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies the set of capabilities advertised by the
local auto-negotiation entity.
Capabilities in this object that are not available in
swL2PortAutoNegCapabilityBits cannot be enabled.
Note that the local auto-negotiation entity may advertise some capabilities
beyond the scope of this MIB. This is indicated by returning the bit value
bOther in addition to any bit values for standard capabilities that are listed
in the IANAifMauAutoNegCapBits TC."
REFERENCE "[IEEE802.3], 30.6.1.1.6,
aAutoNegAdvertisedTechnologyAbility."
::= { swL2PortAutoNegInfoEntry 4 }
swL2PortAutoNegInfoCapReceivedBits OBJECT-TYPE
SYNTAX IANAifMauAutoNegCapBits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies the set of capabilities received from the
remote auto-negotiation entity.
Note that interfaces that support this MIB may be attached to remote
auto-negotiation entities that have capabilities beyond the scope of this
MIB. This is indicated by returning the bit value bOther in addition to
any bit values for standard capabilities that are listed in the
IANAifMauAutoNegCapBits TC."
REFERENCE "[IEEE802.3], 30.6.1.1.7,
aAutoNegReceivedTechnologyAbility."
::= { swL2PortAutoNegInfoEntry 5 }
-- -----------------------------------------------------------------------------
-- swL2PortDropCounterTable
-- -----------------------------------------------------------------------------
swL2PortDropCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortDropCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information for each port drop counter."
::= { swL2PortMgmt 9 }
swL2PortDropCounterEntry OBJECT-TYPE
SYNTAX SwL2PortDropCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port auto negotiation of the device."
INDEX { swL2PortDropCounterPortIndex }
::= { swL2PortDropCounterTable 1 }
SwL2PortDropCounterEntry ::=
SEQUENCE {
swL2PortDropCounterPortIndex
INTEGER,
swL2PortBufferFullDrops
Counter,
swL2PortACLDrops
Counter,
swL2PortMulticastDrops
Counter,
swL2PortVLANIngressDrops
Counter
}
swL2PortDropCounterPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port
number in the module)"
::= { swL2PortDropCounterEntry 1 }
swL2PortBufferFullDrops OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded while buffer full."
::= { swL2PortDropCounterEntry 2 }
swL2PortACLDrops OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets denied by ACLs."
::= { swL2PortDropCounterEntry 3 }
swL2PortMulticastDrops OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packet that is discarded."
::= { swL2PortDropCounterEntry 4 }
swL2PortVLANIngressDrops OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by VLAN ingress checking."
::= { swL2PortDropCounterEntry 5 }
-- -----------------------------------------------------------------------------
-- swL2PortJumboFrameCtrlTable
-- -----------------------------------------------------------------------------
swL2PortJumboFrameCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortJumboFrameCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information for each port's jumbo frame information."
::= { swL2PortMgmt 10 }
swL2PortJumboFrameCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortJumboFrameCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port's jumbo frame of the device."
INDEX { swL2PortJumboFrameCtrlPortIndex }
::= { swL2PortJumboFrameCtrlTable 1 }
SwL2PortJumboFrameCtrlEntry ::=
SEQUENCE {
swL2PortJumboFrameCtrlPortIndex
INTEGER,
swL2PortJumboFrameCtrlState
INTEGER
}
swL2PortJumboFrameCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the module's port number."
::= { swL2PortJumboFrameCtrlEntry 1 }
swL2PortJumboFrameCtrlState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the jumbo frame state on a specified port."
::= { swL2PortJumboFrameCtrlEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
-- -----------------------------------------------------------------------------
swL2DiffServTypeCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DiffServTypeCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the Differentiated Service (DiffServ) type information of each port."
::= { swL2DiffServMgmt 1 }
swL2DiffServTypeCtrlEntry OBJECT-TYPE
SYNTAX SwL2DiffServTypeCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of DiffServ type information for each port of the device."
INDEX { swL2DiffServTypeCtrlPortIndex }
::= { swL2DiffServTypeCtrlTable 1 }
SwL2DiffServTypeCtrlEntry ::=
SEQUENCE {
swL2DiffServTypeCtrlPortIndex
INTEGER,
swL2DiffServTypeCtrlDiffServType
INTEGER
}
swL2DiffServTypeCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2DiffServTypeCtrlEntry 1 }
swL2DiffServTypeCtrlDiffServType OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
dscp(2),
tos(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DiffServ type of this port.
disabled (1) --- no DiffServ and ToS field modification ability.
DSCP (2) --- indicates if the associated port's DSCP control information is in
the swL2DiffServDSCPCtrlTable will take effect upon replacement of
the DSCP(DiffServ codepoint) field.
ToS (3) --- indicates if the associated port's ToS control information in the
swL2DiffServTOSCtrlTable will take effect for the replacement of the
IP ToS precedence and the 802.1p tag control priority field."
::= { swL2DiffServTypeCtrlEntry 2 }
-- -----------------------------------------------------------------------------
swL2DiffServDSCPCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DiffServDSCPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains DSCP (Differentiated Service Code Point) control
information."
::= { swL2DiffServMgmt 2 }
swL2DiffServDSCPCtrlEntry OBJECT-TYPE
SYNTAX SwL2DiffServDSCPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of DSCP control information for each port."
INDEX { swL2DiffServDSCPCtrlPortIndex }
::= { swL2DiffServDSCPCtrlTable 1 }
SwL2DiffServDSCPCtrlEntry ::=
SEQUENCE {
swL2DiffServDSCPCtrlPortIndex
INTEGER,
swL2DiffServDSCPCtrlMode
INTEGER,
swL2DiffServDSCPCtrlValue
INTEGER
}
swL2DiffServDSCPCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2DiffServDSCPCtrlEntry 1 }
swL2DiffServDSCPCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
dscp-Force-Overwrite(1),
dscp-Change-If-Zero(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP mode of this port.
dscp-Force-Overwrite(1) --- The DSCP field for the IP packet is replaced by the specific
value regardless of the DSCP of the incoming packet.
dscp-Change-If-Zero(2) --- The DSCP field for the IP packet is replaced by the specific
value if the DSCP of the incoming packet is zero."
::= { swL2DiffServDSCPCtrlEntry 2 }
swL2DiffServDSCPCtrlValue OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value of this port."
::= { swL2DiffServDSCPCtrlEntry 3 }
-- -----------------------------------------------------------------------------
swL2DiffServTOSCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DiffServTOSCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains ToS (Type of Service) control
information."
::= { swL2DiffServMgmt 3 }
swL2DiffServTOSCtrlEntry OBJECT-TYPE
SYNTAX SwL2DiffServTOSCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ToS control information for each port."
INDEX { swL2DiffServTOSCtrlPortIndex }
::= { swL2DiffServTOSCtrlTable 1 }
SwL2DiffServTOSCtrlEntry ::=
SEQUENCE {
swL2DiffServTOSCtrlPortIndex
INTEGER,
swL2DiffServTOSCtrlMode
INTEGER,
swL2DiffServTOSCtrlValue
INTEGER
}
swL2DiffServTOSCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2DiffServTOSCtrlEntry 1 }
swL2DiffServTOSCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
tos-Force-Overwrite(1),
tos-TOS-Overwrite-802dot1p(2),
tos-802dot1p-Overwrite-TOS(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ToS mode of this port.
tos-Force-Overwrite(1) --- The IP ToS precedence has changed to the specific value.
tos-TOS-Overwrite-802dot1p(2) --- If the incoming packet is an IPv4 packet, change the 802.1p
tag control priority field to the value in the IP ToS precedence
field.
tos-802dot1p-Overwrite-TOS(3) --- If the incoming packet is an IPv4 packet, the IP ToS precedence
is changed to the value in the 802.1p tag control priority
field."
::= { swL2DiffServTOSCtrlEntry 2 }
swL2DiffServTOSCtrlValue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)"
::= { swL2DiffServTOSCtrlEntry 3 }
-- -----------------------------------------------------------------------------
-- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
-- -----------------------------------------------------------------------------
swL2MulticastFilterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about multicast filter profile."
::={swL2LimitedMulticastMgmt 1}
swL2MulticastFilterProfileEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each multicast filter profile. "
INDEX {swL2MulticastFilterProfileIndex}
::={swL2MulticastFilterProfileTable 1}
SwL2MulticastFilterProfileEntry ::=
SEQUENCE{
swL2MulticastFilterProfileIndex
INTEGER,
swL2MulticastFilterProfileName
DisplayString,
swL2MulticastFilterStatus
RowStatus
}
swL2MulticastFilterProfileIndex OBJECT-TYPE
SYNTAX INTEGER(1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates index for each profile."
::={swL2MulticastFilterProfileEntry 1}
swL2MulticastFilterProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies a profile name for each multicast filter profile."
::={swL2MulticastFilterProfileEntry 2}
swL2MulticastFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2MulticastFilterProfileEntry 3 }
-- ----------------------------------------------------------------------------
swL2MulticastFilterProfileAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterProfileAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about multicast filter address."
::={swL2LimitedMulticastMgmt 2}
swL2MulticastFilterProfileAddressEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterProfileAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each multicast filter address. "
INDEX {swL2MulticastFilterProfileIdIndex,swL2MulticastFilterFromIp,swL2MulticastFilterToIp}
::={swL2MulticastFilterProfileAddressTable 1}
SwL2MulticastFilterProfileAddressEntry ::=
SEQUENCE{
swL2MulticastFilterProfileIdIndex
INTEGER,
swL2MulticastFilterFromIp
IpAddress,
swL2MulticastFilterToIp
IpAddress,
swL2MulticastFilterAddressState
RowStatus
}
swL2MulticastFilterProfileIdIndex OBJECT-TYPE
SYNTAX INTEGER(1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates index for each profile."
::={swL2MulticastFilterProfileAddressEntry 1}
swL2MulticastFilterFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the head IP address of a multicast address range which will
be binded to a multicast filter profile."
::={swL2MulticastFilterProfileAddressEntry 2}
swL2MulticastFilterToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the tail IP address of a multicast address range which will
be binded to a multicast filter profile."
::={swL2MulticastFilterProfileAddressEntry 3}
swL2MulticastFilterAddressState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
Setting value to createAndGo (4) will add the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile.
Setting value to destroy (6) will remove the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp from multicast filter profile."
::={swL2MulticastFilterProfileAddressEntry 4}
-- ----------------------------------------------------------------------------
swL2LimitedMulticastFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LimitedMulticastFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that is used to bind the port to the profile ID."
::={swL2LimitedMulticastMgmt 3}
swL2LimitedMulticastFilterPortEntry OBJECT-TYPE
SYNTAX SwL2LimitedMulticastFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that is used to bind the port to the profile ID. "
INDEX {swL2LimitedMulticastFilterPortIndex}
::={swL2LimitedMulticastFilterPortTable 1}
SwL2LimitedMulticastFilterPortEntry ::=
SEQUENCE{
swL2LimitedMulticastFilterPortIndex
INTEGER,
swL2LimitedMulticastFilterPortAccess
INTEGER,
swL2LimitedMulticastFilterPortProfileID
DisplayString,
swL2LimitedMulticastFilterPortProfileStatus
INTEGER
}
swL2LimitedMulticastFilterPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the port as an index."
::={swL2LimitedMulticastFilterPortEntry 1}
swL2LimitedMulticastFilterPortAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the access status for each port."
::= {swL2LimitedMulticastFilterPortEntry 2}
swL2LimitedMulticastFilterPortProfileID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a profile ID list for each port."
::={swL2LimitedMulticastFilterPortEntry 3}
swL2LimitedMulticastFilterPortProfileStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
add(2),
delete(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the multicast filter profile list which binds to each port.
When set to add (2), the multicast filter profile ID list which is specified in
swL2LimitedMulticastFilterPortProfileID will be bound to the port.
When set to delete (3), the multicast filter profile ID list that is specified in
swL2LimitedMulticastFilterPortProfileID will be unbound from the port.
The attribute value reverts to 'other' once the action has been done."
::={swL2LimitedMulticastFilterPortEntry 4}
-- ----------------------------------------------------------------------------
swL2MulticastFilterPortMaxGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterPortMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about max group numbers based on each port."
::={swL2LimitedMulticastMgmt 4}
swL2MulticastFilterPortMaxGroupEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterPortMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of max group number information for each port. "
INDEX {swL2MulticastFilterPortMaxGroupPortIndex}
::={swL2MulticastFilterPortMaxGroupTable 1}
SwL2MulticastFilterPortMaxGroupEntry ::=
SEQUENCE{
swL2MulticastFilterPortMaxGroupPortIndex
INTEGER,
swL2MulticastFilterPortMaxGroup
INTEGER
}
swL2MulticastFilterPortMaxGroupPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the port number as a table index."
::={swL2MulticastFilterPortMaxGroupEntry 1}
swL2MulticastFilterPortMaxGroup OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies maximum multicast filter group numbers for each port.
The default value is 256."
::= { swL2MulticastFilterPortMaxGroupEntry 2 }
-- ----------------------------------------------------------------------------
swL2LimitedMulticastFilterVIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LimitedMulticastFilterVIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that is used to bind the VID to the profile ID."
::={swL2LimitedMulticastMgmt 5}
swL2LimitedMulticastFilterVIDEntry OBJECT-TYPE
SYNTAX SwL2LimitedMulticastFilterVIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that is used to bind the VID to the profile ID. "
INDEX {swL2LimitedMulticastFilterVIDIndex}
::={swL2LimitedMulticastFilterVIDTable 1}
SwL2LimitedMulticastFilterVIDEntry ::=
SEQUENCE{
swL2LimitedMulticastFilterVIDIndex
INTEGER,
swL2LimitedMulticastFilterVIDAccess
INTEGER,
swL2LimitedMulticastFilterVIDProfileID
DisplayString,
swL2LimitedMulticastFilterVIDProfileStatus
INTEGER
}
swL2LimitedMulticastFilterVIDIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the VID as an index."
::={swL2LimitedMulticastFilterVIDEntry 1}
swL2LimitedMulticastFilterVIDAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the access status for each VID."
::= {swL2LimitedMulticastFilterVIDEntry 2}
swL2LimitedMulticastFilterVIDProfileID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a profile ID list for each VID."
::={swL2LimitedMulticastFilterVIDEntry 3}
swL2LimitedMulticastFilterVIDProfileStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
add(2),
delete(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the multicast filter profile list which binds to each VID.
When set to add (2), the multicast filter profile ID list which is specified in
swL2LimitedMulticastFilterVIDProfileID will be bound to the VID.
When set to delete (3), the multicast filter profile ID list that is specified in
swL2LimitedMulticastFilterVIDProfileID will be unbound from the VID.
The attribute value reverts to 'other' once the action has been done."
::={swL2LimitedMulticastFilterVIDEntry 4}
-- ----------------------------------------------------------------------------
swL2MulticastFilterVIDMaxGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterVIDMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about max group numbers based on VID."
::={swL2LimitedMulticastMgmt 6}
swL2MulticastFilterVIDMaxGroupEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterVIDMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of max group number information for each VID. "
INDEX {swL2MulticastFilterVIDMaxGroupVIDIndex}
::={swL2MulticastFilterVIDMaxGroupTable 1}
SwL2MulticastFilterVIDMaxGroupEntry ::=
SEQUENCE{
swL2MulticastFilterVIDMaxGroupVIDIndex
INTEGER,
swL2MulticastFilterVIDMaxGroup
INTEGER
}
swL2MulticastFilterVIDMaxGroupVIDIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the VID number as a table index."
::={swL2MulticastFilterVIDMaxGroupEntry 1}
swL2MulticastFilterVIDMaxGroup OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies maximum multicast filter group numbers for each VID.
The default value is 256."
::= { swL2MulticastFilterVIDMaxGroupEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
-- -----------------------------------------------------------------------------
swL2QOSBandwidthControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 1 }
swL2QOSBandwidthControlEntry OBJECT-TYPE
SYNTAX SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOSBandwidthControlTable."
INDEX { swL2QOSBandwidthPortIndex }
::= { swL2QOSBandwidthControlTable 1 }
SwL2QOSBandwidthControlEntry ::=
SEQUENCE {
swL2QOSBandwidthPortIndex
INTEGER,
swL2QOSBandwidthRxRate
INTEGER,
swL2QOSBandwidthTxRate
INTEGER,
swL2QOSBandwidthRadiusRxRate
INTEGER,
swL2QOSBandwidthRadiusTxRate
INTEGER
}
swL2QOSBandwidthPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port."
::= { swL2QOSBandwidthControlEntry 1 }
swL2QOSBandwidthRxRate OBJECT-TYPE
SYNTAX INTEGER (1..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates RX Rate (Mbit/sec) of the specified port. A value of 10000 means no limit."
::= { swL2QOSBandwidthControlEntry 2 }
swL2QOSBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER (1..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates TX Rate(Mbit/sec) of the specified port. A value of 10000 means no limit."
::= { swL2QOSBandwidthControlEntry 3 }
swL2QOSBandwidthRadiusRxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Rx Rate. "
::= { swL2QOSBandwidthControlEntry 4 }
swL2QOSBandwidthRadiusTxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Tx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Tx Rate. "
::= { swL2QOSBandwidthControlEntry 5 }
-- -----------------------------------------------------------------------------
swL2QOSSchedulingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 2 }
swL2QOSSchedulingEntry OBJECT-TYPE
SYNTAX SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOSSchedulingTable."
INDEX { swL2QOSSchedulingClassIndex }
::= { swL2QOSSchedulingTable 1 }
SwL2QOSSchedulingEntry ::=
SEQUENCE {
swL2QOSSchedulingClassIndex
INTEGER,
swL2QOSSchedulingMaxPkts
INTEGER,
swL2QOSSchedulingMechanism
INTEGER,
swL2QOSSchedulingMaxLatency
INTEGER
}
swL2QOSSchedulingClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hardware queue number."
::= { swL2QOSSchedulingEntry 1 }
swL2QOSSchedulingMaxPkts OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of packets the hardware priority queue will be allowed
to transmit before allowing the next lowest priority queue to transmit its packets.
a value between 0 and 15 can be specified."
::= { swL2QOSSchedulingEntry 2 }
swL2QOSSchedulingMechanism OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
roundrobin(2),
weightfair(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the mechanism of QoS scheduling."
::= { swL2QOSSchedulingEntry 3 }
swL2QOSSchedulingMaxLatency OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum amount of time the hardware priority queue will be allowed
to transmit packets before allowing the next lowest priority queue to begin transmitting
its packets. A value between 0 and 255 can be specified- with this value multiplied
by 16 ms to arrive at the total allowed time for the queue to transmit packets.
For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting
the last packet until it finishes when the max_latency timer expires. "
::= { swL2QOSSchedulingEntry 4}
-- -----------------------------------------------------------------------------
swL2QOS8021pUserPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 3 }
swL2QOS8021pUserPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOS8021pUserPriorityTable."
INDEX { swL2QOS8021pUserPriorityIndex }
::= { swL2QOS8021pUserPriorityTable 1 }
SwL2QOS8021pUserPriorityEntry ::=
SEQUENCE {
swL2QOS8021pUserPriorityIndex
INTEGER,
swL2QOS8021pUserPriorityClass
INTEGER
}
swL2QOS8021pUserPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p user priority."
::= { swL2QOS8021pUserPriorityEntry 1 }
swL2QOS8021pUserPriorityClass OBJECT-TYPE
SYNTAX INTEGER (0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has seven hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 6 (the highest priority)."
::= { swL2QOS8021pUserPriorityEntry 2 }
-- -----------------------------------------------------------------------------
swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 4 }
swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOS8021pDefaultPriorityTable."
INDEX { swL2QOS8021pDefaultPriorityIndex }
::= { swL2QOS8021pDefaultPriorityTable 1 }
SwL2QOS8021pDefaultPriorityEntry ::=
SEQUENCE {
swL2QOS8021pDefaultPriorityIndex
INTEGER,
swL2QOS8021pDefaultPriority
INTEGER,
swL2QOS8021pRadiusPriority
INTEGER
}
swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port number."
::= { swL2QOS8021pDefaultPriorityEntry 1 }
swL2QOS8021pDefaultPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to untagged packets received by the
ports on the switch."
::= { swL2QOS8021pDefaultPriorityEntry 2 }
swL2QOS8021pRadiusPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated,
this value will overwrite the local configured value."
::= { swL2QOS8021pDefaultPriorityEntry 3 }
swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
roundrobin(2),
weightfair(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the QoS scheduling mechanism."
::= { swL2QOSMgmt 5 }
swL2QOSHolPreventionCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls QoS HoL Prevention"
::= { swL2QOSMgmt 6 }
-- -----------------------------------------------------------------------------
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
-- -----------------------------------------------------------------------------
swL2PortSecurityControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A port security feature which controls the address learning capability and
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given, e.g N this will allow N addresses to be
learned on this port, the first N address learned will be locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet
without learned source addresses are discarded (e.g. dropped) and no more new
addresses can be learned on this port."
::= { swL2PortSecurityMgmt 1 }
swL2PortSecurityControlEntry OBJECT-TYPE
SYNTAX SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2PortSecurityControlTable."
INDEX { swL2PortSecurityPortIndex }
::= { swL2PortSecurityControlTable 1 }
SwL2PortSecurityControlEntry ::=
SEQUENCE {
swL2PortSecurityPortIndex
INTEGER,
swL2PortSecurityMaxLernAddr
INTEGER,
swL2PortSecurityMode
INTEGER,
swL2PortSecurityAdmState
INTEGER,
swL2PortSecurityEntryClearCtrl
INTEGER
}
swL2PortSecurityPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the secured port to lock address learning."
::= { swL2PortSecurityControlEntry 1 }
swL2PortSecurityMaxLernAddr OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates allowable number of addresses that can be learned on this port."
::= { swL2PortSecurityControlEntry 2 }
swL2PortSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
permanent(2),
deleteOnTimeout(3),
deleteOnReset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the locking address mode.
In deleteOnTimeout (3) mode - the locked addresses can be aged out after
the aging timer expires. In this mode, when the locked address has aged
out, the number of addresses that can be learned has to be increased by one.
In deleteOnReset (4) mode - Locked addresses never age out unless the system
restarts which will prevent port movement or intrusion."
::= { swL2PortSecurityControlEntry 3 }
swL2PortSecurityAdmState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the administration state of the locking address."
::= { swL2PortSecurityControlEntry 4 }
swL2PortSecurityEntryClearCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to clear port security entries by port.
Setting this value to 'start' will execute the clear action,
Once cleared, the value returns to 'other'."
::= { swL2PortSecurityControlEntry 5 }
-- -----------------------------------------------------------------------------
swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 2 }
swL2PortSecurityDelVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates VLAN name."
::= { swL2PortSecurityDelCtrl 1 }
swL2PortSecurityDelPort OBJECT-TYPE
SYNTAX INTEGER (1..768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port."
::= { swL2PortSecurityDelCtrl 2 }
swL2PortSecurityDelMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies a MAC address."
::= { swL2PortSecurityDelCtrl 3 }
swL2PortSecurityDelActivity OBJECT-TYPE
SYNTAX INTEGER {
none(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"."
::= { swL2PortSecurityDelCtrl 4 }
-- -----------------------------------------------------------------------------
swL2PortSecurityTrapLogState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled (2), whenever there's a new MAC address that violates
the pre-defined port security configuration, traps will be sent out
and the relevant information will be logged into the system."
::= { swL2PortSecurityMgmt 3 }
-- -----------------------------------------------------------------------------
-- swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
-- -----------------------------------------------------------------------------
swL2DhcpRelayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the DHCP relay function is enabled or
disabled."
::= { swL2DhcpRelayMgmt 1 }
swL2DhcpRelayHopCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of router hops that
DHCP packets can cross."
::= { swL2DhcpRelayMgmt 2 }
swL2DhcpRelayTimeThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the minimum time in seconds within which
the switch must relay the DHCP request. If this time is
exceeded, the switch will drop the DHCP packet."
::= { swL2DhcpRelayMgmt 3 }
swL2DhcpRelayOption82State OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the DHCP relay agent information option 82
function is enabled or disabled."
::= { swL2DhcpRelayMgmt 4 }
swL2DhcpRelayOption82Check OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the checking mechanism of DHCP relay agent
information option 82 is enabled or disabled."
::= { swL2DhcpRelayMgmt 5 }
swL2DhcpRelayOption82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(1),
drop(2),
keep(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the reforwarding policy of the DHCP relay agent
information option 82.
replace (1) - replace the exiting option 82 field in messages.
drop (2) - discard messages with an existing option 82 field.
keep (3) - retain the existing option 82 field messages."
::= { swL2DhcpRelayMgmt 6 }
swL2DhcpRelayCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DhcpRelayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the IP address as a destination to forward
(relay) DHCP packets to."
::= { swL2DhcpRelayMgmt 7 }
swL2DhcpRelayCtrlEntry OBJECT-TYPE
SYNTAX SwL2DhcpRelayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to."
INDEX { swL2DhcpRelayCtrlInterfaceName, swL2DhcpRelayCtrlServer}
::= { swL2DhcpRelayCtrlTable 1 }
SwL2DhcpRelayCtrlEntry ::=
SEQUENCE {
swL2DhcpRelayCtrlInterfaceName
DisplayString,
swL2DhcpRelayCtrlServer
IpAddress,
swL2DhcpRelayCtrlState
INTEGER
}
swL2DhcpRelayCtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the IP interface."
::= { swL2DhcpRelayCtrlEntry 1 }
swL2DhcpRelayCtrlServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP server IP address."
::= { swL2DhcpRelayCtrlEntry 2 }
swL2DhcpRelayCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other (1) - This entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid (2) - Writing this value to the object will remove the
corresponding entry from the table.
valid (3) - This entry resides in the table."
::= { swL2DhcpRelayCtrlEntry 3 }
-- -----------------------------------------------------------------------------
-- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
-- -----------------------------------------------------------------------------
swL2TrunkMaxSupportedEntries OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of entries in the trunk configuration table
(swL2TrunkCtrlTable)."
::= { swL2TrunkMgmt 1 }
swL2TrunkCurrentNumEntries OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active number of entries in the trunk configuration
table."
::= { swL2TrunkMgmt 2 }
swL2TrunkCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information about the logical port trunk groups."
::= { swL2TrunkMgmt 3 }
swL2TrunkCtrlEntry OBJECT-TYPE
SYNTAX SwL2TrunkCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about each logical port trunk group."
INDEX { swL2TrunkIndex }
::= { swL2TrunkCtrlTable 1 }
SwL2TrunkCtrlEntry ::=
SEQUENCE {
swL2TrunkIndex
INTEGER,
swL2TrunkName
DisplayString,
swL2TrunkMasterPort
INTEGER,
swL2TrunkMember
PortList,
swL2TrunkFloodingPort
INTEGER,
swL2TrunkType
INTEGER,
swL2TrunkState
RowStatus
}
swL2TrunkIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module."
::= { swL2TrunkCtrlEntry 1 }
swL2TrunkName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the logical port trunk group."
::= { swL2TrunkCtrlEntry 2 }
swL2TrunkMasterPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the master port number of the port trunk
entry. When using Port Trunking, you cannot configure the other
ports of the group except the master port.
Their configuration must be the same as the master port (e.g. speed,
duplex, enabled/disabled, flow control, and so on)."
::= { swL2TrunkCtrlEntry 3 }
swL2TrunkMember OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group."
::= { swL2TrunkCtrlEntry 4 }
swL2TrunkFloodingPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the flooding port number of the port trunk
entry. The first port of the Trunk group is implicitly configured to
be the flooding port."
::= { swL2TrunkCtrlEntry 5 }
swL2TrunkType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
static(2),
lacp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of trunk group.
static: is a static trunk group
lacp: is a LACP trunk group. "
::= { swL2TrunkCtrlEntry 6 }
swL2TrunkState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2TrunkCtrlEntry 7 }
swL2TrunkAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
other(1),
mac-source(2),
mac-destination(3),
mac-source-dest(4),
ip-source(5),
ip-destination(6),
ip-source-dest(7),
l4-source-port(8),
l4-destination-port(9),
l4-source-dest-port(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures part of the packet examined by the
switch when selecting the egress port for transmitting
load-sharing data."
::= { swL2TrunkMgmt 4 }
swL2TrunkLACPPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies which ports are grouped together (this can be up to 8 ports)
into a single logical link."
::= { swL2TrunkMgmt 5 }
swL2TrunkLACPPortEntry OBJECT-TYPE
SYNTAX SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifying which ports are grouped together (this can be up to 8 ports)
into a single logical link."
INDEX { swL2TrunkLACPPortIndex }
::= { swL2TrunkLACPPortTable 1 }
SwL2TrunkLACPPortEntry ::=
SEQUENCE {
swL2TrunkLACPPortIndex
INTEGER,
swL2TrunkLACPPortState
INTEGER
}
swL2TrunkLACPPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of logical port LACP. "
::= { swL2TrunkLACPPortEntry 1 }
swL2TrunkLACPPortState OBJECT-TYPE
SYNTAX INTEGER{
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of a logical port LACP."
::= { swL2TrunkLACPPortEntry 2 }
swL2TrunkVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the VLAN trunking feature of the device."
::= { swL2TrunkMgmt 6 }
swL2TrunkVLANEntry OBJECT-TYPE
SYNTAX SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to configure the VLAN trunking settings for each port."
INDEX { swL2TrunkVLANPort }
::= { swL2TrunkVLANTable 1 }
SwL2TrunkVLANEntry ::=
SEQUENCE {
swL2TrunkVLANPort
INTEGER,
swL2TrunkVLANState
INTEGER
}
swL2TrunkVLANPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port being configured."
::= { swL2TrunkVLANEntry 1 }
swL2TrunkVLANState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the logical port LACP."
::= { swL2TrunkVLANEntry 2 }
-- -----------------------------------------------------------------------------
-- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
-- -----------------------------------------------------------------------------
swL2MirrorLogicTargetPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which switch port will sniff another
port. A trunk port member cannot be configured as a target
snooping port. The port number is the sequential (logical)
number, which is also applied to the bridge MIB, etc."
::= { swL2MirrorMgmt 1 }
swL2MirrorPortSourceIngress OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the port where ingress packets will be sniffed."
::= { swL2MirrorMgmt 2 }
swL2MirrorPortSourceEgress OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the port where egress packets will be sniffed."
::= { swL2MirrorMgmt 3 }
swL2MirrorPortState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port mirroring state.
other (1) - this entry is currently in use but the conditions
under which it will remain so are different from each of the
following values.
disabled (2) - After writing this value to the object, the
corresponding entry will be removed from the table.
enabled (3) - This entry resides in the table."
::= { swL2MirrorMgmt 4 }
swL2MirrorGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MirrorGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information about the mirror group configuration."
::= { swL2MirrorMgmt 5 }
swL2MirrorGroupEntry OBJECT-TYPE
SYNTAX SwL2MirrorGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about each mirror group configuration."
INDEX { swL2MirrorGroupID }
::= { swL2MirrorGroupTable 1 }
SwL2MirrorGroupEntry ::=
SEQUENCE {
swL2MirrorGroupID
INTEGER,
swL2MirrorGroupRowStatus
RowStatus,
swL2MirrorGroupState
INTEGER,
swL2MirrorGroupTargetPort
INTEGER,
swL2MirrorGroupSourceIngress
PortList,
swL2MirrorGroupSourceEngress
PortList
}
swL2MirrorGroupID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the mirror group.
The range of this object is (1..N),
the value of N is project dependent."
::= { swL2MirrorGroupEntry 1 }
swL2MirrorGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2MirrorGroupEntry 2 }
swL2MirrorGroupState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the mirror group state."
::= { swL2MirrorGroupEntry 3 }
swL2MirrorGroupTargetPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the mirror group target port."
::= { swL2MirrorGroupEntry 4 }
swL2MirrorGroupSourceIngress OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the mirror group ingress source ports."
::= { swL2MirrorGroupEntry 5 }
swL2MirrorGroupSourceEngress OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the mirror group engress source ports."
::= { swL2MirrorGroupEntry 6 }
-- -----------------------------------------------------------------------------
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
-- -----------------------------------------------------------------------------
swL2IGMPMaxSupportedVlans OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of VLANs in the layer 2 IGMP control table
(swL2IGMPCtrlTable)."
::= { swL2IGMPMgmt 1 }
swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of multicast IP groups per VLAN in the layer 2
IGMP information table."
::= { swL2IGMPMgmt 2 }
-- swL2IGMPLastQueryIPAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IP address of the last sent IGMP query packet."
-- ::= { swL2IGMPMgmt 3 }
swL2IGMPSnoopingMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the global state of igmp_snoop multicast_vlan."
::={swL2IGMPMgmt 3}
swL2IGMPCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled,
there is only one entry in the table, with an index of 1. If the
VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12,
with an index range from 1 to 12."
::= { swL2IGMPMgmt 4 }
swL2IGMPCtrlEntry OBJECT-TYPE
SYNTAX SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled."
INDEX { swL2IGMPCtrlVid }
::= { swL2IGMPCtrlTable 1 }
SwL2IGMPCtrlEntry ::=
SEQUENCE {
-- swL2IGMPCtrlIndex
-- INTEGER,
swL2IGMPCtrlVid
INTEGER,
swL2IGMPQueryInterval
INTEGER,
swL2IGMPMaxResponseTime
INTEGER,
swL2IGMPRobustness
INTEGER,
swL2IGMPLastMemberQueryInterval
INTEGER,
swL2IGMPHostTimeout
INTEGER,
swL2IGMPRouteTimeout
INTEGER,
swL2IGMPLeaveTimer
INTEGER,
swL2IGMPQueryState
INTEGER,
swL2IGMPCurrentState
INTEGER,
swL2IGMPCtrlState
INTEGER,
swL2IGMPFastLeaveState
INTEGER,
swL2IGMPQueryVersion
INTEGER,
swL2IGMPRateLimit
INTEGER,
swL2IGMPReportSuppression
INTEGER
}
-- swL2IGMPCtrlIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP control entry number. The scale
-- depends on the current VLAN state (swL2VlanInfoStatus). If the
-- VLAN is disabled, there is only one entry in the table, with index 1.
-- If the VLAN is in Port-Based or 802.1q mode, the maximum number of entries
-- is 12, with an index range from 1 to 12."
-- ::= { swL2IGMPCtrlEntry 1 }
swL2IGMPCtrlVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IGMP control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by management users.
If the VLAN is in Port-Based mode, the VID is arranged from 1 to 12, in a
fixed form. If the VLAN is in 802.1q mode, the VID setting can be changed
to a number from 1 to 4094 by the management user, and the VID in each entry must be
unique within the IGMP Control Table."
::= { swL2IGMPCtrlEntry 1 }
swL2IGMPQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which IGMP Host-Query packets are
transmitted on this switch."
DEFVAL { 125 }
::= { swL2IGMPCtrlEntry 2 }
swL2IGMPMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time on this switch."
DEFVAL { 10 }
::= { swL2IGMPCtrlEntry 3 }
swL2IGMPRobustness OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to have a high packet
loss, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses."
DEFVAL { 2 }
::= { swL2IGMPCtrlEntry 4 }
swL2IGMPLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 5 }
swL2IGMPHostTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The timer value for sending IGMP query packets when none were
sent by the host on the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query messages if the
timer expires. Please reference RFC2236-1997."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 6 }
swL2IGMPRouteTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 7 }
swL2IGMPLeaveTimer OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"When a query receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 8 }
swL2IGMPQueryState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the IGMP query is enabled or disabled."
::= { swL2IGMPCtrlEntry 9 }
swL2IGMPCurrentState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
querier(2),
non-querier(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current IGMP query state."
::= { swL2IGMPCtrlEntry 10 }
swL2IGMPCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other (1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable (2) - IGMP function is disabled for this entry.
enable (3) - IGMP function is enabled for this entry."
::= { swL2IGMPCtrlEntry 11 }
swL2IGMPFastLeaveState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the fast_leave status of this entry.
other (1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable (2) - IGMP fast-leave function is disabled for this entry.
enable (3) - IGMP fast-leave function is enabled for this entry."
::= { swL2IGMPCtrlEntry 12 }
swL2IGMPQueryVersion OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the IGMP version of query packet which will be sent by the router."
::= { swL2IGMPCtrlEntry 13 }
swL2IGMPRateLimit OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config the rate of IGMP report or leave packet that the switch can
process on a specific VLAN. The rate is specified in packet per second.
The packet that exceeds the limited rate will be dropped.
This setting is also applied to multicast VLAN.
The default setting '0' is no_limit."
DEFVAL { 0 }
::= { swL2IGMPCtrlEntry 14 }
swL2IGMPReportSuppression OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, multiple IGMP reports or leaves for a specific group (S,G)
will be integrated into only one report before being sent to the router
port."
::= { swL2IGMPCtrlEntry 15 }
--------------------------------------------------
-- IGMP Query Info Table
--------------------------------------------------
swL2IGMPQueryInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device."
::= { swL2IGMPMgmt 5 }
swL2IGMPQueryInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled."
INDEX { swL2IGMPInfoVid }
::= { swL2IGMPQueryInfoTable 1 }
SwL2IGMPQueryInfoEntry ::=
SEQUENCE {
-- swL2IGMPInfoIndex
-- INTEGER,
swL2IGMPInfoVid
INTEGER,
swL2IGMPInfoQueryCount
INTEGER,
swL2IGMPInfoTxQueryCount
INTEGER,
swL2IGMPQueryIPAddress
IpAddress,
swL2IGMPQueryExpiryTime
INTEGER
}
-- swL2IGMPInfoIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS Obsolete
-- DESCRIPTION
-- "This object indicates the IGMP query information entry
-- number. It could be up to 12 entries, depending on the current
-- number of VLAN entries."
-- ::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable)."
::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis."
::= { swL2IGMPQueryInfoEntry 2 }
swL2IGMPInfoTxQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-VLAN basis. In the case of an IGMP timer expiration, the switch
will send IGMP query packets to all related VLAN member ports and
increment this object by 1."
::= { swL2IGMPQueryInfoEntry 3 }
swL2IGMPQueryIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Query IP addresses."
::= { swL2IGMPQueryInfoEntry 4 }
swL2IGMPQueryExpiryTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Query Expiry Time."
::= { swL2IGMPQueryInfoEntry 5 }
swL2IGMPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The table containing current IGMP information which was captured by
this device, provided that the swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of the associated VLAN entries are all enabled.
Note that the priority of IGMP table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between entries in the
IGMP Table and Filtering Table inside the switch's H/W address table,
then the Filtering Table entry overwrites the colliding entry of the IGMP Table.
Also see the swL2FilterMgmt description."
::= { swL2IGMPMgmt 6 }
swL2IGMPInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Information about current IGMP information which was captured by
this device, provided that the swL2DevCtrlIGMPSnooping and the
swL2IGMPCtrlState of associated VLAN entries are all enabled."
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr }
::= { swL2IGMPInfoTable 1 }
SwL2IGMPInfoEntry ::=
SEQUENCE {
swL2IGMPVid
INTEGER,
swL2IGMPGroupIpAddr
IpAddress,
swL2IGMPMacAddr
MacAddress,
swL2IGMPPortMap
PortList,
swL2IGMPIpGroupReportCount
INTEGER,
swL2IGMPVersion
INTEGER,
swL2IGMPGroupMode
INTEGER
}
swL2IGMPVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates the VID of individual IGMP table entries.
It shows the VID IGMP report information captured on the network."
::= { swL2IGMPInfoEntry 1 }
swL2IGMPGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object identifies group IP addresses which were captured from
IGMP packets, on a per-VLAN basis."
::= { swL2IGMPInfoEntry 2 }
swL2IGMPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object identifies MAC addresses which correspond
to the swL2IGMPGroupIpAddr, on a per-VLAN basis."
::= { swL2IGMPInfoEntry 3 }
swL2IGMPPortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates which ports belong to the same
multicast group, on a per-VLAN basis. Each multicast group has an
octet string which is indicated by a port map. The most significant
bit represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the switch is
represented by a single bit within the value of this object. If that bit
has a value of '1' then that port is included in the set of ports; the
port is not included if its bit has a value of '0'(Note that the setting
of the bits corresponding to the port from which a frame is received is
irrelevant). The 4 octets represent one unit port according to its logical
port. If the unit is less than 32 ports, other ports are not affected and
are replaced with zeroes."
::= { swL2IGMPInfoEntry 4 }
swL2IGMPIpGroupReportCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates how many report packets were received by the
device, that correspond with this entry when the IGMP function is enabled
on a per-VLAN basis."
::= { swL2IGMPInfoEntry 5 }
swL2IGMPVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object identifies the version of IGMP from
IGMP packets, on a per-VLAN basis."
::= { swL2IGMPInfoEntry 6 }
swL2IGMPGroupMode OBJECT-TYPE
SYNTAX INTEGER {
include(1),
exclude(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"When the version of IGMP is v3, this object identifies whether the
group is in INCLUDE or EXCLUDE mode."
::= { swL2IGMPInfoEntry 7 }
-- -----------------------------------------------------------------------------
-- swL2IGMPRouterPortTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 7 }
-- -----------------------------------------------------------------------------
swL2IGMPRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information of the router port table."
::= { swL2IGMPMgmt 7 }
swL2IGMPRouterPortEntry OBJECT-TYPE
SYNTAX SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of swL2IGMPRouterPortTable."
INDEX { swL2IGMPRouterPortVlanid }
::= { swL2IGMPRouterPortTable 1 }
SwL2IGMPRouterPortEntry ::=
SEQUENCE {
swL2IGMPRouterPortVlanid
INTEGER,
swL2IGMPRouterPortVlanName
DisplayString,
swL2IGMPRouterPortStaticPortList
PortList,
swL2IGMPRouterPortDynamicPortList
PortList,
swL2IGMPRouterPortForbiddenPortList
PortList
}
swL2IGMPRouterPortVlanid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the router's port entry."
::= { swL2IGMPRouterPortEntry 1 }
swL2IGMPRouterPortVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the router's port entry."
::= { swL2IGMPRouterPortEntry 2 }
swL2IGMPRouterPortStaticPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the static portlist of the router's port entry."
::= { swL2IGMPRouterPortEntry 3 }
swL2IGMPRouterPortDynamicPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the dynamic portlist of the router's port entry."
::= { swL2IGMPRouterPortEntry 4 }
swL2IGMPRouterPortForbiddenPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the forbidden portlist of the router's port entry."
::= { swL2IGMPRouterPortEntry 5 }
-- -----------------------------------------------------------------------------
-- swL2IGMPMulticastVlanTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 8 }
-- -----------------------------------------------------------------------------
swL2IGMPMulticastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the IGMP snooping multicast VLAN table."
::= { swL2IGMPMgmt 8 }
swL2IGMPMulticastVlanEntry OBJECT-TYPE
SYNTAX SwL2IGMPMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of swL2IGMPMulticastVlanTable."
INDEX { swL2IGMPMulticastVlanid}
::= { swL2IGMPMulticastVlanTable 1 }
SwL2IGMPMulticastVlanEntry ::=
SEQUENCE {
swL2IGMPMulticastVlanid
INTEGER,
swL2IGMPMulticastVlanName
DisplayString,
swL2IGMPMulticastVlanSourcePort
PortList,
swL2IGMPMulticastVlanMemberPort
PortList,
swL2IGMPMulticastVlanTagMemberPort
PortList,
swL2IGMPMulticastVlanState
INTEGER,
swL2IGMPMulticastVlanReplaceSourceIp
IpAddress,
swL2IGMPMulticastVlanRowStatus
RowStatus,
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction
INTEGER,
swL2IGMPMulticastVlanUntagSourcePort
PortList,
swL2IGMPMulticastVlanRemapPriority
INTEGER,
swL2IGMPMulticastVlanReplacePriority
INTEGER
}
swL2IGMPMulticastVlanid OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry."
::= { swL2IGMPMulticastVlanEntry 1 }
swL2IGMPMulticastVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry."
::= { swL2IGMPMulticastVlanEntry 2 }
swL2IGMPMulticastVlanSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { swL2IGMPMulticastVlanEntry 3 }
swL2IGMPMulticastVlanMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { swL2IGMPMulticastVlanEntry 4 }
swL2IGMPMulticastVlanTagMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 5 }
swL2IGMPMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable or disable the IGMP snooping multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 6 }
swL2IGMPMulticastVlanReplaceSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement source IP of this multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 7 }
swL2IGMPMulticastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2IGMPMulticastVlanEntry 8 }
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether to remove all the multicast address
lists from the IGMP multicast VLAN or not."
::= { swL2IGMPMulticastVlanEntry 9 }
swL2IGMPMulticastVlanUntagSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the untagged member ports to add to the multicast VLAN."
::={ swL2IGMPMulticastVlanEntry 10}
swL2IGMPMulticastVlanRemapPriority OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value (0 to 7) to be associated with the data traffic
to be forwarded on the multicast VLAN.
When set to 8, the packet's original priority will be used."
DEFVAL {8}
::={ swL2IGMPMulticastVlanEntry 11}
swL2IGMPMulticastVlanReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that a packet's priority will be changed by the switch
based on the remap priority. This flag will only take effect
when remap priority is set."
::={ swL2IGMPMulticastVlanEntry 12}
-- -----------------------------------------------------------------------------
-- swL2IGMPMulticastVlanGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 9 }
-- -----------------------------------------------------------------------------
swL2IGMPMulticastVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the IGMP snooping multicast VLAN group information"
::= { swL2IGMPMgmt 9 }
swL2IGMPMulticastVlanGroupEntry OBJECT-TYPE
SYNTAX SwL2IGMPMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping multicast VLAN group."
INDEX { swL2IGMPMulticastVlanGroupVid,swL2IGMPMulticastVlanGroupFromIp,swL2IGMPMulticastVlanGroupToIp }
::= { swL2IGMPMulticastVlanGroupTable 1 }
SwL2IGMPMulticastVlanGroupEntry ::=
SEQUENCE {
swL2IGMPMulticastVlanGroupVid
INTEGER,
swL2IGMPMulticastVlanGroupFromIp
IpAddress,
swL2IGMPMulticastVlanGroupToIp
IpAddress,
swL2IGMPMulticastVlanGroupStatus
RowStatus
}
swL2IGMPMulticastVlanGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the IGMP snooping multicast VLAN group."
::= { swL2IGMPMulticastVlanGroupEntry 1 }
swL2IGMPMulticastVlanGroupFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { swL2IGMPMulticastVlanGroupEntry 2 }
swL2IGMPMulticastVlanGroupToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { swL2IGMPMulticastVlanGroupEntry 3 }
swL2IGMPMulticastVlanGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2IGMPMulticastVlanGroupEntry 4 }
-- -----------------------------------------------------------------------------
-- swL2IGMPv3Table OBJECT IDENTIFIER ::= { swL2IGMPMgmt 10 }
-- -----------------------------------------------------------------------------
swL2IGMPv3Table OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IGMP snooping V3 information."
::= { swL2IGMPMgmt 10 }
swL2IGMPv3Entry OBJECT-TYPE
SYNTAX SwL2IGMPv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping V3."
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr , swL2IGMPv3SourceIPAddr }
::= { swL2IGMPv3Table 1 }
SwL2IGMPv3Entry ::=
SEQUENCE {
swL2IGMPv3SourceIPAddr
IpAddress,
swL2IGMPv3Forwarding
INTEGER,
swL2IGMPv3ExpireTimer
INTEGER
}
swL2IGMPv3SourceIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the source IP addresses from the group where they were captured from.
IGMP packets, on a per-VLAN basis."
::= { swL2IGMPv3Entry 1 }
swL2IGMPv3Forwarding OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies if the packets from the source IP addresses are forwarding or not."
::= { swL2IGMPv3Entry 2 }
swL2IGMPv3ExpireTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the leaving times of the source time."
::= { swL2IGMPv3Entry 3 }
-- -----------------------------------------------------------------------------
-- swIGMPSnoopingGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 11 }
-- -----------------------------------------------------------------------------
swIGMPSnoopingGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwIGMPSnoopingGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the current IGMP snooping group information captured by
the device."
::= { swL2IGMPMgmt 11 }
swIGMPSnoopingGroupEntry OBJECT-TYPE
SYNTAX SwIGMPSnoopingGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping group information which has been captured by
the device."
INDEX { swIGMPSnoopingGroupVid , swIGMPSnoopingGroupGroupAddr , swIGMPSnoopingGroupSourceAddr}
::= { swIGMPSnoopingGroupTable 1 }
SwIGMPSnoopingGroupEntry ::=
SEQUENCE {
swIGMPSnoopingGroupVid
INTEGER,
swIGMPSnoopingGroupGroupAddr
IpAddress,
swIGMPSnoopingGroupSourceAddr
IpAddress,
swIGMPSnoopingGroupIncludePortMap
PortList,
swIGMPSnoopingGroupExcludePortMap
PortList,
swIGMPSnoopingGroupReportCount
INTEGER,
swIGMPSnoopingGroupUpTime
TimeTicks,
swIGMPSnoopingGroupExpiryTime
TimeTicks,
swIGMPSnoopingGroupRouterPorts
PortList,
swIGMPSnoopingGroupStaticMemberPorts
PortList
}
swIGMPSnoopingGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the individual IGMP snooping group table entry."
::= { swIGMPSnoopingGroupEntry 1 }
swIGMPSnoopingGroupGroupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the group IP address which has been captured from
the IGMP packet, on a per-VLAN basis."
::= { swIGMPSnoopingGroupEntry 2 }
swIGMPSnoopingGroupSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the source addresses."
::= { swIGMPSnoopingGroupEntry 3 }
swIGMPSnoopingGroupIncludePortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port list under INCLUDE mode."
::= { swIGMPSnoopingGroupEntry 4 }
swIGMPSnoopingGroupExcludePortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port list under EXCLUDE mode."
::= { swIGMPSnoopingGroupEntry 5 }
swIGMPSnoopingGroupReportCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how many report packets were received by our
device corresponding with this entry that has the IGMP function enabled,
on a per-group basis."
::= { swIGMPSnoopingGroupEntry 6 }
swIGMPSnoopingGroupUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how long since the group was detected."
::= { swIGMPSnoopingGroupEntry 7 }
swIGMPSnoopingGroupExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time left before this group will be aged out."
::= { swIGMPSnoopingGroupEntry 8 }
swIGMPSnoopingGroupRouterPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port number of the router ports."
::= { swIGMPSnoopingGroupEntry 9 }
swIGMPSnoopingGroupStaticMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port number of the static member ports.
This object is only supported by IGMPv2."
::= { swIGMPSnoopingGroupEntry 10 }
-- -----------------------------------------------------------------------------
-- swL2IGMPDynIpMultMgmt OBJECT IDENTIFIER ::= { swL2IGMPMgmt 12 }
-- -----------------------------------------------------------------------------
swL2IGMPDynIpMultMgmt OBJECT IDENTIFIER ::= { swL2IGMPMgmt 12 }
swL2IGMPDynIPMultMaxEntry OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of entries which can be learned by dynamic IP multicast"
::= { swL2IGMPDynIpMultMgmt 1 }
swL2IGMPSnoopingClearDynIpMult OBJECT IDENTIFIER ::= { swL2IGMPDynIpMultMgmt 2 }
swL2IGMPSnoopingClearDynIpMultVID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VLAN identifier where the data driven
entries will be removed from."
::= { swL2IGMPSnoopingClearDynIpMult 1 }
swL2IGMPSnoopingClearDynIpMultIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the IP address of the IGMP snooping group from which
the data driven entries will be removed."
::= { swL2IGMPSnoopingClearDynIpMult 2 }
swL2IGMPSnoopingClearDynIpMultAction OBJECT-TYPE
SYNTAX INTEGER{
all(1),
vlan(2),
group(3),
other(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object will clear the data driven entries.
all - remove all learned data driven groups
vlan - clear all data driven entries in the VLAN specified in
swIGMPSnoopingClearDynIpMultVID.
group - clear the group with address specified in swL2IGMPSnoopingClearDynIpMultIP
in the VLAN specified in swIGMPSnoopingClearDynIpMultVID.
"
::= { swL2IGMPSnoopingClearDynIpMult 3 }
swL2IGMPDynIPMultCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPDynIPMultCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP dynamic IP multicast."
::= { swL2IGMPDynIpMultMgmt 3 }
swL2IGMPDynIPMultCtrlEntry OBJECT-TYPE
SYNTAX SwL2IGMPDynIPMultCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of manageable entities for IGMP dynamic IP multicast."
INDEX { swL2IGMPCtrlVid }
::= { swL2IGMPDynIPMultCtrlTable 1 }
SwL2IGMPDynIPMultCtrlEntry ::=
SEQUENCE {
swL2IGMPDynIPMultVlanState
INTEGER,
swL2IGMPDynIPMultVlanAge
INTEGER,
swL2IGMPDynIPMultGroupExpiryTime
INTEGER
}
swL2IGMPDynIPMultVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to disable or enable the dynamic IP multicast feature in this VLAN."
::= { swL2IGMPDynIPMultCtrlEntry 1 }
swL2IGMPDynIPMultVlanAge OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN."
::= { swL2IGMPDynIPMultCtrlEntry 2 }
swL2IGMPDynIPMultGroupExpiryTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the dynamic IP multicast Group Expiry Time."
::= { swL2IGMPDynIPMultCtrlEntry 3 }
swL2IGMPAccessAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP Access Authentication
configurations of the device."
::= { swL2IGMPMgmt 13 }
swL2IGMPAccessAuthEntry OBJECT-TYPE
SYNTAX SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of manageable entities for IGMP Access Authentication.
The configuration is done per port."
INDEX { swL2IGMPAccessAuthPort }
::= { swL2IGMPAccessAuthTable 1 }
SwL2IGMPAccessAuthEntry ::=
SEQUENCE {
swL2IGMPAccessAuthPort
INTEGER,
swL2IGMPAccessAuthState
INTEGER
}
swL2IGMPAccessAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured."
::= { swL2IGMPAccessAuthEntry 1 }
swL2IGMPAccessAuthState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the status of IGMP Access Authentication of the port."
::= { swL2IGMPAccessAuthEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2IGMPCountrInfoMgmt OBJECT IDENTIFIER ::= { swL2IGMPMgmt 14 }
-- -----------------------------------------------------------------------------
swL2IGMPCountrInfoMgmt OBJECT IDENTIFIER ::= { swL2IGMPMgmt 14 }
swL2IGMPSnoopingClearStatisticsCounter OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear the IGMP snooping statistics counter."
::={swL2IGMPCountrInfoMgmt 1}
-- -----------------------------------------------------------------------------
-- swL2IGMPVlanCounterInfoTable OBJECT IDENTIFIER ::= { swL2IGMPCountrInfoMgmt 2 }
-- -----------------------------------------------------------------------------
swL2IGMPVlanCounterInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPVlanCounterInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device, based on VLAN."
::= { swL2IGMPCountrInfoMgmt 2 }
swL2IGMPVlanCounterInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPVlanCounterInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled."
INDEX { swL2IGMPVlanCounterInfoVid }
::= { swL2IGMPVlanCounterInfoTable 1 }
SwL2IGMPVlanCounterInfoEntry ::=
SEQUENCE {
swL2IGMPVlanCounterInfoVid
INTEGER,
swL2IGMPVlanCounterGroupNumber
INTEGER,
swL2IGMPVlanQueryCountV1
Counter,
swL2IGMPVlanQueryCountV2
Counter,
swL2IGMPVlanQueryCountV3
Counter,
swL2IGMPVlanDropQueryCount
Counter,
swL2IGMPVlanReportCountV1
Counter,
swL2IGMPVlanReportCountV2
Counter,
swL2IGMPVlanReportCountV3
Counter,
swL2IGMPVlanLeaveCountV2
Counter,
swL2IGMPVlanDropedReportAndLeaveCount
Counter,
swL2IGMPVlanDroppedByMaxGroupLimitation
Counter,
swL2IGMPVlanDroppedByGroupFilter
Counter,
swL2IGMPVlanTxQueryCountV1
Counter,
swL2IGMPVlanTxQueryCountV2
Counter,
swL2IGMPVlanTxQueryCountV3
Counter,
swL2IGMPVlanTxReportCountV1
Counter,
swL2IGMPVlanTxReportCountV2
Counter,
swL2IGMPVlanTxReportCountV3
Counter,
swL2IGMPVlanTxLeaveCountV2
Counter
}
swL2IGMPVlanCounterInfoVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of the
IGMP control table (swL2IGMPCtrlTable)."
::= { swL2IGMPVlanCounterInfoEntry 1 }
swL2IGMPVlanCounterGroupNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group number on a per VLAN basis."
::= { swL2IGMPVlanCounterInfoEntry 2 }
swL2IGMPVlanQueryCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1."
::= { swL2IGMPVlanCounterInfoEntry 3 }
swL2IGMPVlanQueryCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2."
::= { swL2IGMPVlanCounterInfoEntry 4 }
swL2IGMPVlanQueryCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3."
::= { swL2IGMPVlanCounterInfoEntry 5 }
swL2IGMPVlanDropQueryCount OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets dropped
since the IGMP function was enabled, on a per-VLAN basis."
::= { swL2IGMPVlanCounterInfoEntry 6 }
swL2IGMPVlanReportCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1."
::= { swL2IGMPVlanCounterInfoEntry 7 }
swL2IGMPVlanReportCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2."
::= { swL2IGMPVlanCounterInfoEntry 8 }
swL2IGMPVlanReportCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3."
::= { swL2IGMPVlanCounterInfoEntry 9 }
swL2IGMPVlanLeaveCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of leave packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2."
::= { swL2IGMPVlanCounterInfoEntry 10 }
swL2IGMPVlanDropedReportAndLeaveCount OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report and leave packets
dropped since the IGMP function was enabled, on a per-VLAN basis."
::= { swL2IGMPVlanCounterInfoEntry 11 }
swL2IGMPVlanDroppedByMaxGroupLimitation OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets received
dropped by max group limitation since the IGMP function was enabled,
on a per-VLAN basis."
::= { swL2IGMPVlanCounterInfoEntry 12 }
swL2IGMPVlanDroppedByGroupFilter OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets received
dropped by group filter since the IGMP function was enabled,
on a per-VLAN basis."
::= { swL2IGMPVlanCounterInfoEntry 13 }
swL2IGMPVlanTxQueryCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-VLAN basis, for IGMPv1. "
::= { swL2IGMPVlanCounterInfoEntry 14 }
swL2IGMPVlanTxQueryCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-VLAN basis, for IGMPv2. "
::= { swL2IGMPVlanCounterInfoEntry 15 }
swL2IGMPVlanTxQueryCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-VLAN basis, for IGMPv3. "
::= { swL2IGMPVlanCounterInfoEntry 16 }
swL2IGMPVlanTxReportCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP report messages, on a
per-VLAN basis, for IGMPv1. "
::= { swL2IGMPVlanCounterInfoEntry 17 }
swL2IGMPVlanTxReportCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP report messages, on a
per-VLAN basis, for IGMPv2. "
::= { swL2IGMPVlanCounterInfoEntry 18 }
swL2IGMPVlanTxReportCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP report messages, on a
per-VLAN basis, for IGMPv3. "
::= { swL2IGMPVlanCounterInfoEntry 19 }
swL2IGMPVlanTxLeaveCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP leave messages, on a
per-VLAN basis, for IGMPv2. "
::= { swL2IGMPVlanCounterInfoEntry 20 }
-- -----------------------------------------------------------------------------
-- swL2IGMPPortCounterInfoTable OBJECT IDENTIFIER ::= { swL2IGMPCountrInfoMgmt 3 }
-- -----------------------------------------------------------------------------
swL2IGMPPortCounterInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPPortCounterInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device, based on port."
::= { swL2IGMPCountrInfoMgmt 3 }
swL2IGMPPortCounterInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPPortCounterInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled."
INDEX { swL2IGMPPortCounterInfoIndex }
::= { swL2IGMPPortCounterInfoTable 1 }
SwL2IGMPPortCounterInfoEntry ::=
SEQUENCE {
swL2IGMPPortCounterInfoIndex
INTEGER,
swL2IGMPPortCounterGroupNumber
INTEGER,
swL2IGMPPortQueryCountV1
Counter,
swL2IGMPPortQueryCountV2
Counter,
swL2IGMPPortQueryCountV3
Counter,
swL2IGMPPortDropQueryCount
Counter,
swL2IGMPPortReportCountV1
Counter,
swL2IGMPPortReportCountV2
Counter,
swL2IGMPPortReportCountV3
Counter,
swL2IGMPPortLeaveCountV2
Counter,
swL2IGMPPortDropedReportAndLeaveCount
Counter,
swL2IGMPPortDroppedByMaxGroupLimitation
Counter,
swL2IGMPPortDroppedByGroupFilter
Counter,
swL2IGMPPortTxQueryCountV1
Counter,
swL2IGMPPortTxQueryCountV2
Counter,
swL2IGMPPortTxQueryCountV3
Counter,
swL2IGMPPortTxReportCountV1
Counter,
swL2IGMPPortTxReportCountV2
Counter,
swL2IGMPPortTxReportCountV3
Counter,
swL2IGMPPortTxLeaveCountV2
Counter
}
swL2IGMPPortCounterInfoIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port number of the associated IGMP Counter
info table entry. "
::= { swL2IGMPPortCounterInfoEntry 1 }
swL2IGMPPortCounterGroupNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group number per port."
::= { swL2IGMPPortCounterInfoEntry 2 }
swL2IGMPPortQueryCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv1."
::= { swL2IGMPPortCounterInfoEntry 3 }
swL2IGMPPortQueryCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv2."
::= { swL2IGMPPortCounterInfoEntry 4 }
swL2IGMPPortQueryCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv3."
::= { swL2IGMPPortCounterInfoEntry 5 }
swL2IGMPPortDropQueryCount OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets dropped
since the IGMP function was enabled, on a per-port basis."
::= { swL2IGMPPortCounterInfoEntry 6 }
swL2IGMPPortReportCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv1."
::= { swL2IGMPPortCounterInfoEntry 7 }
swL2IGMPPortReportCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv2."
::= { swL2IGMPPortCounterInfoEntry 8 }
swL2IGMPPortReportCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv3."
::= { swL2IGMPPortCounterInfoEntry 9 }
swL2IGMPPortLeaveCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of leave packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv2."
::= { swL2IGMPPortCounterInfoEntry 10 }
swL2IGMPPortDropedReportAndLeaveCount OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of report and leave packets
dropped since the IGMP function was enabled, on a per-port basis."
::= { swL2IGMPPortCounterInfoEntry 11 }
swL2IGMPPortDroppedByMaxGroupLimitation OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets received
dropped by max group limitation since the IGMP function was enabled,
on a per-port basis."
::= { swL2IGMPPortCounterInfoEntry 12 }
swL2IGMPPortDroppedByGroupFilter OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets received
dropped by group filter since the IGMP function was enabled,
on a per-port basis."
::= { swL2IGMPPortCounterInfoEntry 13 }
swL2IGMPPortTxQueryCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-port basis, for IGMPv1. "
::= { swL2IGMPPortCounterInfoEntry 14 }
swL2IGMPPortTxQueryCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-port basis, for IGMPv2. "
::= { swL2IGMPPortCounterInfoEntry 15 }
swL2IGMPPortTxQueryCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on a
per-port basis, for IGMPv3. "
::= { swL2IGMPPortCounterInfoEntry 16 }
swL2IGMPPortTxReportCountV1 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP report messages, on a
per-port basis, for IGMPv1. "
::= { swL2IGMPPortCounterInfoEntry 17 }
swL2IGMPPortTxReportCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP report messages, on a
per-port basis, for IGMPv2. "
::= { swL2IGMPPortCounterInfoEntry 18 }
swL2IGMPPortTxReportCountV3 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP report messages, on a
per-port basis, for IGMPv3. "
::= { swL2IGMPPortCounterInfoEntry 19 }
swL2IGMPPortTxLeaveCountV2 OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP leave messages, on a
per-port basis, for IGMPv2. "
::= { swL2IGMPPortCounterInfoEntry 20 }
-- -----------------------------------------------------------------------------
-- swL2IGMPRouterIPAddressTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 15 }
-- -----------------------------------------------------------------------------
swL2IGMPRouterIPAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPRouterIPAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the router IP address of the associated IGMP
Router Port Table (swL2IGMPRouterPortTable)."
::= { swL2IGMPMgmt 15 }
swL2IGMPRouterIPAddressEntry OBJECT-TYPE
SYNTAX SwL2IGMPRouterIPAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current router IP address in the IGMP
Router Port Table (swL2IGMPRouterPortTable)."
INDEX { swL2IGMPRouterIPAddressVid , swL2IGMPRouterIPAddress}
::= { swL2IGMPRouterIPAddressTable 1 }
SwL2IGMPRouterIPAddressEntry ::=
SEQUENCE {
swL2IGMPRouterIPAddressVid
INTEGER,
swL2IGMPRouterIPAddress
IpAddress
}
swL2IGMPRouterIPAddressVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the associated IGMP Router Port
Table (swL2IGMPRouterPortTable)."
::= { swL2IGMPRouterIPAddressEntry 1 }
swL2IGMPRouterIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Router IP address of the associated IGMP
Router Port Table. "
::= { swL2IGMPRouterIPAddressEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2IGMPSnoopingStaticGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 16 }
-- -----------------------------------------------------------------------------
swL2IGMPSnoopingStaticGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPSnoopingStaticGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the current IGMP snooping static group information captured by
the device."
::= { swL2IGMPMgmt 16 }
swL2IGMPSnoopingStaticGroupEntry OBJECT-TYPE
SYNTAX SwL2IGMPSnoopingStaticGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP snooping static group information captured by
the device."
INDEX { swL2IGMPSnoopingStaticGroupVID , swL2IGMPSnoopingStaticGroupIPaddress}
::= { swL2IGMPSnoopingStaticGroupTable 1 }
SwL2IGMPSnoopingStaticGroupEntry ::=
SEQUENCE {
swL2IGMPSnoopingStaticGroupVID
INTEGER,
swL2IGMPSnoopingStaticGroupIPaddress
IpAddress,
swL2IGMPSnoopingStaticGroupMemberPortList
PortList,
swL2IGMPSnoopingStaticGroupRowStatus
RowStatus
}
swL2IGMPSnoopingStaticGroupVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the current IGMP snooping static group."
::= { swL2IGMPSnoopingStaticGroupEntry 1 }
swL2IGMPSnoopingStaticGroupIPaddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current IGMP snooping static group IP address. "
::= { swL2IGMPSnoopingStaticGroupEntry 2 }
swL2IGMPSnoopingStaticGroupMemberPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the current IGMP snooping static group Member Portlist. "
::= { swL2IGMPSnoopingStaticGroupEntry 3 }
swL2IGMPSnoopingStaticGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::={swL2IGMPSnoopingStaticGroupEntry 4}
-- -----------------------------------------------------------------------------
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
-- -----------------------------------------------------------------------------
swL2TrafficCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the storm traffic control configuration."
::= { swL2TrafficMgmt 1 }
swL2TrafficCtrlEntry OBJECT-TYPE
SYNTAX SwL2TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specific to the storm traffic control
configuration."
INDEX { swL2TrafficCtrlGroupIndex }
::= { swL2TrafficCtrlTable 1 }
SwL2TrafficCtrlEntry ::=
SEQUENCE {
swL2TrafficCtrlGroupIndex
INTEGER,
swL2TrafficCtrlUnitIndex
INTEGER,
swL2TrafficCtrlBMStromthreshold
INTEGER,
swL2TrafficCtrlBcastStromCtrl
INTEGER,
swL2TrafficCtrlMcastStromCtrl
INTEGER,
swL2TrafficCtrlDlfStromCtrl
INTEGER
}
swL2TrafficCtrlGroupIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the logical port trunk. The trunk group number depends
on the existence of a unit and module."
::= { swL2TrafficCtrlEntry 1 }
swL2TrafficCtrlUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the unit in the device"
::= { swL2TrafficCtrlEntry 2 }
swL2TrafficCtrlBMStromthreshold OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides how many thousand broadcast/multicast packets
per second (depending on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl
or swL2TrafficCtrlDlfStromCtrl objects being enabled) will activate
the storm control function. Whenever a port reaches its configured amount
of packets in the one second time interval, the device will start dropping
that type of packet, until the time interval has expired. Once the time
interval has expired, the device will restart forwarding that type of packet."
::= { swL2TrafficCtrlEntry 3 }
swL2TrafficCtrlBcastStromCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the broadcast storm control function is
enabled or disabled."
::= { swL2TrafficCtrlEntry 4 }
swL2TrafficCtrlMcastStromCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the multicast storm control function is
enabled or disabled."
::= { swL2TrafficCtrlEntry 5 }
swL2TrafficCtrlDlfStromCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the destination lookup fail function is
enabled or disabled."
::= { swL2TrafficCtrlEntry 6 }
-- -----------------------------------------------------------------------------
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
-- -----------------------------------------------------------------------------
swL2TrafficSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies that the port can just forward traffic to the
specific port list."
::= { swL2TrafficSegMgmt 1 }
swL2TrafficSegEntry OBJECT-TYPE
SYNTAX SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information which specifies the port with its traffic
forwarding list."
INDEX { swL2TrafficSegPort }
::= { swL2TrafficSegTable 1 }
SwL2TrafficSegEntry ::=
SEQUENCE {
swL2TrafficSegPort
INTEGER,
swL2TrafficSegForwardPorts
PortList
}
swL2TrafficSegPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the logical port."
::= { swL2TrafficSegEntry 1 }
swL2TrafficSegForwardPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port list where a specific port can forward traffic."
::= { swL2TrafficSegEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
-- -----------------------------------------------------------------------------
swL2StpForwardBPDU OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether or not to flood BPDU packets when STP is disabled on the device."
::= { swL2StpMgmt 1 }
swL2StpLbd OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether STP loopback prevention on the device is turned on."
::= { swL2StpMgmt 2 }
swL2StpLbdRecoverTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time period set between the checking intervals of the BPDU loop.
Configuring this time as 0 disables loopback checking."
::= { swL2StpMgmt 3 }
swL2StpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { swL2StpMgmt 4 }
swL2StpPortEntry OBJECT-TYPE
SYNTAX SwL2StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { swL2StpPort }
::= { swL2StpPortTable 1 }
SwL2StpPortEntry ::=
SEQUENCE {
swL2StpPort
INTEGER,
swL2StpPortLbd
INTEGER,
swL2StpPortStatus
INTEGER,
swL2StpPortRole
INTEGER,
swL2StpPortFBPDU
INTEGER,
swL2StpPortLinkState
INTEGER,
swL2StpPortProtocolMigration
TruthValue,
swL2StpPortAdminEdgePort
TruthValue,
swL2StpPortOperEdgePort
TruthValue,
swL2StpPortAdminPointToPoint
INTEGER,
swL2StpPortOperPointToPoint
TruthValue,
swL2StpPortAdminPathCost
Unsigned32,
swL2StpPortPriority
INTEGER,
swL2STPPortState
INTEGER
}
swL2StpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for this entry."
::= { swL2StpPortEntry 1}
swL2StpPortLbd OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable the loopback function on the specified port."
::= { swL2StpPortEntry 2 }
swL2StpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
discarding(3),
learning(4),
forwarding(5),
broken(6),
no-stp-enabled(7),
err-disabled(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the port is enabled, this defines the port's current state as
defined by the Spanning Tree Protocol. If PortEnable is disabled,
the port status will be no-stp-enabled (7). If the port is in error
disabled status, the port status will be err-disabled."
::= { swL2StpPortEntry 3 }
swL2StpPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
nonStp(6),
loopback(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the port is enabled, this defines the port's current port role
as defined by the Spanning Tree Protocol. If the PortEnable is disabled,
the port status will be nonstp. If the port is in error loopback status,
the port role will be loopback."
::= { swL2StpPortEntry 4 }
swL2StpPortFBPDU OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable status of the BPDU filtering mechanism as related to this port."
::= { swL2StpPortEntry 5 }
swL2StpPortLinkState OBJECT-TYPE
SYNTAX INTEGER {
link-down(1),
half-10Mbps-none(2),
half-10Mbps-backp(3),
full-10Mbps-none(4),
full-10Mbps-8023x(5),
half-100Mbps-none(6),
half-100Mbps-backp(7),
full-100Mbps-none(8),
full-100Mbps-8023x(9),
half-1000Mbps-none(10),
full-1000Mbps-backp(11),
full-1000Mbps-none(12),
full-1000Mbps-8023x(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the STP port speed and duplex mode."
::= { swL2StpPortEntry 6 }
swL2StpPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing TRUE (1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns a FALSE message when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { swL2StpPortEntry 7 }
swL2StpPortAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE (1) indicates that this port should be
assumed as an edge-port and a value of FALSE (2) indicates
that this port should be assumed as a non-edge-port."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.3"
::= { swL2StpPortEntry 8 }
swL2StpPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
swL2StpPortAdminEdgePort and is set to FALSE on reception of
a BPDU packet."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { swL2StpPortEntry 9 }
swL2StpPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue (0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse (1) indicates
that this port should be treated as having a shared media
connection. A value of auto (2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregated, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { swL2StpPortEntry 10 }
swL2StpPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the swL2StpPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { swL2StpPortEntry 11}
swL2StpPortAdminPathCost OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) --INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object swL2StpPortPathCost, which
returns the operational value of the path cost."
REFERENCE
"IEEE 802.1D-1998: Section 8.5.5.3"
::= { swL2StpPortEntry 12}
swL2StpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
swL2StpPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.1"
::= { swL2StpPortEntry 13 }
swL2STPPortState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to describe the enable/disable state of the loopback
prevention function on a per-port basis."
::= { swL2StpPortEntry 14 }
-- ----------------------------------------------------------------------------
-- swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
-- ----------------------------------------------------------------------------
swL2MulticastFilterModeVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterModeVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about the VLAN multicast filter mode."
::={swL2MulticastFilterMode 1}
swL2MulticastFilterModeVlanEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterModeVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter mode information for each VLAN. "
INDEX {swL2MulticastFilterVid}
::={swL2MulticastFilterModeVlanTable 1}
SwL2MulticastFilterModeVlanEntry ::=
SEQUENCE{
swL2MulticastFilterVid
INTEGER,
swL2MulticastFilterVlanMode
INTEGER
}
swL2MulticastFilterVid OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the VID for each VLAN."
::={swL2MulticastFilterModeVlanEntry 1}
swL2MulticastFilterVlanMode OBJECT-TYPE
SYNTAX INTEGER{
forward-all-groups(1),
forward-unregistered-groups(2),
filter-unregistered-groups(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the multicast filter mode for each VLAN."
::={swL2MulticastFilterModeVlanEntry 2}
-- ----------------------------------------------------------------------------
swL2MulticastFilterModePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2MulticastFilterModePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about the port multicast filter mode."
::={swL2MulticastFilterMode 2}
swL2MulticastFilterModePortEntry OBJECT-TYPE
SYNTAX SwL2MulticastFilterModePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter mode information for each port. "
INDEX {swL2MulticastFilterPortIndex}
::={swL2MulticastFilterModePortTable 1}
SwL2MulticastFilterModePortEntry ::=
SEQUENCE{
swL2MulticastFilterPortIndex
INTEGER,
swL2MulticastFilterPortMode
INTEGER
}
swL2MulticastFilterPortIndex OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the port number."
::={swL2MulticastFilterModePortEntry 1}
swL2MulticastFilterPortMode OBJECT-TYPE
SYNTAX INTEGER{
forward-all-groups(1),
forward-unregistered-groups(2),
filter-unregistered-groups(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies multicast filter mode for each port."
::={swL2MulticastFilterModePortEntry 2}
-- ----------------------------------------------------------------------------
-- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
-- ----------------------------------------------------------------------------
swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 }
swL2LoopDetectAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection status for the system."
::= { swL2LoopDetectCtrl 1 }
swL2LoopDetectInterval OBJECT-TYPE
SYNTAX INTEGER (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval value, the range is from 1 to 32767 seconds."
::= { swL2LoopDetectCtrl 2 }
swL2LoopDetectRecoverTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the recover time, the range is from 60 to 1000000.
The value of 0 disables the recover function."
::= { swL2LoopDetectCtrl 3 }
swL2LoopDetectMode OBJECT-TYPE
SYNTAX INTEGER {
vlan-based(1),
port-based(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection mode for the system."
::= { swL2LoopDetectCtrl 4 }
swL2LoopDetectTrapMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
loop_detected(2),
loop_cleared(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection trap mode for the system."
::= { swL2LoopDetectCtrl 5 }
-- ----------------------------------------------------------------------------
swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 }
swL2LoopDetectPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
::= { swL2LoopDetectPortMgmt 1 }
swL2LoopDetectPortEntry OBJECT-TYPE
SYNTAX SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
INDEX { swL2LoopDetectPortIndex }
::= { swL2LoopDetectPortTable 1 }
SwL2LoopDetectPortEntry ::=
SEQUENCE {
swL2LoopDetectPortIndex
INTEGER,
swL2LoopDetectPortState
INTEGER,
swL2LoopDetectPortLoopVLAN
DisplayString,
swL2LoopDetectPortLoopStatus
INTEGER
}
swL2LoopDetectPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module"
::= { swL2LoopDetectPortEntry 1 }
swL2LoopDetectPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection function state on the port."
::= { swL2LoopDetectPortEntry 2 }
swL2LoopDetectPortLoopVLAN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN list that has detected a loopback."
::= { swL2LoopDetectPortEntry 3 }
swL2LoopDetectPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
loop(2),
error(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port status."
::= { swL2LoopDetectPortEntry 4 }
-- -----------------------------------------------------------------------------
-- Layer 2 Trap
-- -----------------------------------------------------------------------------
swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 }
swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 }
swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
-- -----------------------------------------------------------------------------
-- swL2NotifyMgmt
-- -----------------------------------------------------------------------------
swL2macNotificationSeverity OBJECT-TYPE
SYNTAX AgentNotifyLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level of macNotification detection."
::= { swL2NotifyMgmt 1 }
swL2PortSecurityViolationSeverity OBJECT-TYPE
SYNTAX AgentNotifyLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level of PortSecurityViolation detection."
::= { swL2NotifyMgmt 2 }
-- -----------------------------------------------------------------------------
-- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
-- -----------------------------------------------------------------------------
swL2macNotification NOTIFICATION-TYPE
OBJECTS {
swL2macNotifyInfo
}
STATUS current
DESCRIPTION
" This trap indicates the MAC address variations in the address table . "
::= { swL2NotifFirmware 1 }
swL2PortSecurityViolationTrap NOTIFICATION-TYPE
OBJECTS {
swPortSecPortIndex,
swL2PortSecurityViolationMac
}
STATUS current
DESCRIPTION
"When the port_security trap is enabled, new MAC addresses that violate
the pre-defined port security configuration will trigger trap messages
to be sent out."
::= { swL2NotifFirmware 2 }
swL2PortLoopOccurred NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when a Port loop occurs."
::={swL2NotifFirmware 3}
swL2PortLoopRestart NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when a Port loop restarts after the interval time."
::={swL2NotifFirmware 4}
swL2VlanLoopOccurred NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex,
swL2VlanLoopDetectVID
}
STATUS current
DESCRIPTION
"The trap is sent when a Port with a VID loop occurs."
::={swL2NotifFirmware 5}
swL2VlanLoopRestart NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex,
swL2VlanLoopDetectVID
}
STATUS current
DESCRIPTION
"The trap is sent when a Port with a VID loop restarts after the interval time."
::={swL2NotifFirmware 6}
-- -----------------------------------------------------------------------------
-- notificationBidings
-- -----------------------------------------------------------------------------
swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 }
swL2macNotifyInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates information about the last time the system rebooted."
::= { swl2NotificationBidings 1 }
swL2PortSecurityViolationMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the MAC address that violated the port security configuration."
::= { swl2NotificationBidings 2 }
swL2VlanLoopDetectVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the VID that detected a loopback."
::= { swl2NotificationBidings 3 }
END
View Git Blame Copy Permalink