WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DES-3810-28-L3MGMT-MIB

3196 lines
112 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************************
-- DES-3810-28-L3MGMT-MIB
-- *****************************************************************************
--
-- Version 1.09, 2011/11/08, King Cao
-- Description:
-- [Modification]
-- 1.Add swL3RelayDnsCtrlHostTable to support IPv6 record for DNS relay function.
--
-- Version 1.08 2011/04/25, Dinah Zhou
-- Description:
-- [Modification]
-- 1.Add swL3OspfDefInfoOrigMgmt to support ospf default information orgination.
--
-- Version 1.07 2011/01/11, King Cao
-- Description:
-- [Modification]
-- 1.Add swL3LoopBackIpCtrlTable to support loopback IP interface.
--
-- Version 1.06 2010/8/25, Kevin Wang
-- Description:
-- [Modification]
-- 1.Modify objects: swL3ospfIfType, swL3ospfIfTransitDelay, swL3ospfIfRetransInterval,
-- swL3ospfIfPollInterval,swL3ospfIfMulticastForwarding, swL3ospfIfDemand,
-- swL3ospfVirtIfTransitDelay swL3ospfVirtIfRetransInterval to
-- read-only.
-- 2.Remove value bgp in route redistribute.
-- 3.Remove objects: swL3OspfECMPIpDestination,swL3OspfECMPIpSource,
-- swL3OspfECMPCrcLow,swL3OspfECMPCrcHigh,swL3OspfECMPTCPorUDPport.
--
-- Version 1.05 2010/7/13, Kevin Wang
-- Description:
-- [Modification]
-- 1.Add swL3DevMgmt, swL3OspfLsdbMgmt, swL3VrrpOperMgmt, swL3RoutePreference
-- and swL3OspfECMPMgmt.
--
-- Version 1.04 2009/11/26, Carl Zeng
-- Description:
-- [Modification]
-- 1.Modify swL3IpStaticRouteTable swL3IpStaticRouteNextHop node description
-- for support null0 route;
-- 2.Add two new status(active, inActive) and modify description in the
-- swL3IpStaticRouteTable swL3IpStaticRouteStatus.
--
-- Version 1.03 2009/09/25, Carl Zeng
-- Description:
-- [Modification]
-- 1.Add object swL3IpCtrlIpv4AdminState
-- 2.Add object swL3IpCtrlIpv6AdminState
--
-- Version 1.02 2009/09/04, Carl Zeng
-- Description:
-- [Modification]
-- 1.modify object swL3IpCtrlLocalProxyArp in swL3IpCtrlTable, change access level
-- from read-create to read-write.
--
-- Version 1.01 2009/07/27, Phoenix XIe
-- Description:
-- [Modification]
-- 1.Add object swL3IpCtrlLocalProxyArp in swL3IpCtrlTable.
--
-- Version 1.00
-- 2009/6/29
--
-- *****************************************************************************
DES-3810-28-L3MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32,MODULE-IDENTITY,OBJECT-TYPE,IpAddress,
NOTIFICATION-TYPE, Integer32,Unsigned32
FROM SNMPv2-SMI
PhysAddress,TruthValue,DisplayString,RowStatus,MacAddress,TimeStamp
FROM SNMPv2-TC
Ipv6Address FROM IPV6-TC
des3810-28 FROM SW3810PRIMGMT-MIB
TOSType, Metric, AreaID, RouterID,UpToMaxAge,
HelloRange, PositiveInteger, Status, DesignatedRouterPriority
FROM OSPF-MIB
InterfaceIndex FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
swL3MgmtMIB MODULE-IDENTITY
LAST-UPDATED "201111080000Z"
ORGANIZATION " "
CONTACT-INFO
"http://support.dlink.com"
DESCRIPTION
"The Structure of Layer 3 Network Management Information for the
proprietary enterprise."
::= { des3810-28 3 }
NodeAddress ::= OCTET STRING (SIZE(6))
NetAddress ::= OCTET STRING (SIZE(4))
swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 }
swL3IpMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 2 }
swL3RelayMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 3 }
swL3OspfLsdbMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 13 }
swL3VrrpOperMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 14 }
-- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 }
swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 }
swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 }
-- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 }
-- swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 }
swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 3 }
swL3OspfECMPMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 15 }
-- ****************************************************************************
-- Textual Conventions
-- ****************************************************************************
VrId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A number which, along with an interface index (ifIndex),
serves to uniquely identify a virtual router on a given VRRP
router. A set of one or more associated addresses is assigned
to a VRID."
SYNTAX Integer32 (1..255)
-- ********************************************************************
-- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 }
-- ********************************************************************
swL3DevCtrl OBJECT IDENTIFIER ::= { swL3DevMgmt 1 }
swL3DevCtrlRIPState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the Routing Information Protocol (RIP)
version 2 function is enabled or disabled."
::= { swL3DevCtrl 1 }
swL3DevCtrlOSPFState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates OSPF protocol is enabled or disabled."
::= { swL3DevCtrl 2 }
-- swL3DevCtrlDVMRPState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates if the DVMRP protocol is enabled or disabled."
-- ::= { swL3DevCtrl 3 }
-- swL3DevCtrlPIMDMState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates if the PIM-DM protocol is enabled or disabled."
-- ::= { swL3DevCtrl 4 }
swL3DevCtrlVRRPState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates VRRP protocol is enabled or disabled."
::= { swL3DevCtrl 5 }
swL3DevCtrlVrrpPingState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates VRRP protocol Ping is enabled or disabled."
::= { swL3DevCtrl 6 }
-- ********************************************************************
-- swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 }
-- ********************************************************************
-- swL3IpCtrlIpv4State OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IPv4 function state of the device."
-- ::= { swL3IpCtrlMgmt 1 }
-- swL3IpCtrlIpv6State OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IPv6 function state of the device."
-- ::= { swL3IpCtrlMgmt 2 }
swL3IpCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3IpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain IP interface information."
::= { swL3IpCtrlMgmt 3 }
swL3IpCtrlEntry OBJECT-TYPE
SYNTAX SwL3IpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about a specific IP interface."
INDEX { swL3IpCtrlInterfaceName }
::= { swL3IpCtrlTable 1 }
SwL3IpCtrlEntry ::=
SEQUENCE {
swL3IpCtrlInterfaceName
DisplayString,
swL3IpCtrlIfIndex
INTEGER,
swL3IpCtrlIpAddr
IpAddress,
swL3IpCtrlIpSubnetMask
IpAddress,
swL3IpCtrlVlanName
DisplayString,
swL3IpCtrlProxyArp
INTEGER,
swL3IpCtrlSecondary
TruthValue,
swL3IpCtrlMode
INTEGER,
swL3IpCtrlAdminState
INTEGER,
swL3IpCtrlIpv4AdminState
INTEGER,
-- swL3IpCtrlIpv4OperState
-- INTEGER,
swL3IpCtrlIpv6AdminState
INTEGER,
-- swL3IpCtrlIpv6OperState
-- INTEGER,
swL3IpCtrlIpv6LinkLocalAddress
Ipv6Address,
swL3IpCtrlIpv6LinkLocalPrefixLen
INTEGER,
swL3IpCtrlState
RowStatus,
swL3IpCtrlIpv6LinkLocalAutoState
INTEGER,
swL3IpCtrlLocalProxyArp
INTEGER
}
swL3IpCtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the IP interface."
::= { swL3IpCtrlEntry 1 }
swL3IpCtrlIfIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object uniquely identifies the IP interface number in the
swL3IpCtrlTable."
::= { swL3IpCtrlEntry 2 }
swL3IpCtrlIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the interface. This object only can take the
value of the unicast IP address."
::= { swL3IpCtrlEntry 3 }
swL3IpCtrlIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP net mask for this interface."
::= { swL3IpCtrlEntry 4 }
swL3IpCtrlVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table."
::= { swL3IpCtrlEntry 5 }
swL3IpCtrlProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates enable/disable of the proxy ARP function for IPv4."
::= { swL3IpCtrlEntry 6 }
swL3IpCtrlSecondary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is true(1), the IP address is the secondary IP. When
false(2), the IP address is the primary IP."
::= { swL3IpCtrlEntry 7 }
swL3IpCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
bootp(3),
dhcp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the IP operation mode.
other(1) - This entry is currently in use but the conditions under
which it will remain are determined by each of the following values.
bootp(3) - The IP address will be set automatically from a BOOTP
server.
dhcp(4) - The IP address will be set automatically from a DHCP
server."
::= { swL3IpCtrlEntry 8 }
swL3IpCtrlAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the IP interface."
::= { swL3IpCtrlEntry 9 }
swL3IpCtrlIpv4AdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv4 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled."
::= { swL3IpCtrlEntry 10 }
-- swL3IpCtrlIpv4OperState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The current IPv4 operational state of the IP interface.
-- If the swL3IpCtrlIpv4State is disabled, disabled(2) will be displayed.
-- Otherwise, it will be set as other(1)."
-- ::= { swL3IpCtrlEntry 11 }
swL3IpCtrlIpv6AdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled."
::= { swL3IpCtrlEntry 12 }
-- swL3IpCtrlIpv6OperState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The current IPv6 operational state of the IP interface.
-- If the swL3IpCtrlIpv6State is disabled, disabled(2) will be displayed.
-- Otherwise, it will be set as other(1)."
-- ::= { swL3IpCtrlEntry 13 }
swL3IpCtrlIpv6LinkLocalAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 link local address for this interface."
::= { swL3IpCtrlEntry 14 }
swL3IpCtrlIpv6LinkLocalPrefixLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix length for this IPv6 link local address."
::= { swL3IpCtrlEntry 15 }
swL3IpCtrlState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table."
::= { swL3IpCtrlEntry 16 }
swL3IpCtrlIpv6LinkLocalAutoState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the IPv6 link local auto."
::= { swL3IpCtrlEntry 17 }
swL3IpCtrlLocalProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates enable/disable of the local proxy ARP function for IPv4."
::= { swL3IpCtrlEntry 18 }
swL3Ipv6CtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3Ipv6CtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IPv6 information of an IP interface."
::= { swL3IpCtrlMgmt 4 }
swL3Ipv6CtrlEntry OBJECT-TYPE
SYNTAX SwL3Ipv6CtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IPv6 information about a specific IP interface."
INDEX { swL3Ipv6CtrlInterfaceName }
::= { swL3Ipv6CtrlTable 1 }
SwL3Ipv6CtrlEntry ::=
SEQUENCE {
swL3Ipv6CtrlInterfaceName
DisplayString,
swL3Ipv6CtrlMaxReassmblySize
INTEGER,
swL3Ipv6CtrlNsRetransTimer
Unsigned32,
-- swL3Ipv6CtrlRsState
-- INTEGER,
swL3Ipv6CtrlRaState
INTEGER,
swL3Ipv6CtrlRaMinRtrAdvInterval
INTEGER,
swL3Ipv6CtrlRaMaxRtrAdvInterval
INTEGER,
swL3Ipv6CtrlRaLifeTime
INTEGER,
swL3Ipv6CtrlRaReachableTime
INTEGER,
swL3Ipv6CtrlRaRetransTime
Unsigned32,
swL3Ipv6CtrlRaHopLimit
INTEGER,
swL3Ipv6CtrlRaManagedFlag
INTEGER,
swL3Ipv6CtrlRaOtherConfigFlag
INTEGER
}
swL3Ipv6CtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the IP interface."
::= { swL3Ipv6CtrlEntry 1 }
swL3Ipv6CtrlMaxReassmblySize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Reassembly Size of the IP interface."
::= { swL3Ipv6CtrlEntry 2 }
swL3Ipv6CtrlNsRetransTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Neighbor solicitation's retransmit timer.
The unit is set in milliseconds."
::= { swL3Ipv6CtrlEntry 3 }
-- swL3Ipv6CtrlRsState OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Router solicited state."
-- ::= { swL3Ipv6CtrlEntry 4 }
swL3Ipv6CtrlRaState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Neighbor solicited state."
::= { swL3Ipv6CtrlEntry 5 }
swL3Ipv6CtrlRaMinRtrAdvInterval OBJECT-TYPE
SYNTAX INTEGER (3..1350)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval.
Default value: 0.33 * MaxRtrAdvInterval"
::= { swL3Ipv6CtrlEntry 6 }
swL3Ipv6CtrlRaMaxRtrAdvInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds."
DEFVAL {600}
::= { swL3Ipv6CtrlEntry 7 }
swL3Ipv6CtrlRaLifeTime OBJECT-TYPE
SYNTAX INTEGER (0..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the lifetime of the router as the default router."
::= { swL3Ipv6CtrlEntry 8 }
swL3Ipv6CtrlRaReachableTime OBJECT-TYPE
SYNTAX INTEGER (0..3600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the amount of time that a node can consider a neighboring
node reachable after receiving a reachability confirmation."
::= { swL3Ipv6CtrlEntry 9 }
swL3Ipv6CtrlRaRetransTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the amount of time between retransmissions of neighbor
solicited messages.
The unit is set in millisecond."
::= { swL3Ipv6CtrlEntry 10 }
swL3Ipv6CtrlRaHopLimit OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the default value of the hop limit field in the IPv6 header for
packets sent by hosts that receive this RA message."
::= { swL3Ipv6CtrlEntry 11 }
swL3Ipv6CtrlRaManagedFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, it indicates that hosts receiving this RA must use a
stateful address configuration protocol to obtain an address in the addition
to the addresses derived from the stateless address configuration."
::= { swL3Ipv6CtrlEntry 12 }
swL3Ipv6CtrlRaOtherConfigFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, it indicates that hosts receiving this RA must use a stateful
address configuration protocol to obtain an on-link address configuration information."
::= { swL3Ipv6CtrlEntry 13 }
swL3Ipv6AddressCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3Ipv6AddressCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain IPv6 address information for each IP interface."
::= { swL3IpCtrlMgmt 5 }
swL3Ipv6AddressCtrlEntry OBJECT-TYPE
SYNTAX SwL3Ipv6AddressCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about a specific IPv6 address."
INDEX { swL3Ipv6AddressCtrlInterfaceName, swL3Ipv6Address, swL3Ipv6AddressCtrlPrefixLen }
::= { swL3Ipv6AddressCtrlTable 1 }
SwL3Ipv6AddressCtrlEntry ::=
SEQUENCE {
swL3Ipv6AddressCtrlInterfaceName
DisplayString,
swL3Ipv6Address
Ipv6Address,
swL3Ipv6AddressCtrlPrefixLen
INTEGER,
swL3Ipv6AddressCtrlPreferredLifeTime
Unsigned32,
swL3Ipv6AddressCtrlValidLifeTime
Unsigned32,
swL3Ipv6AddressCtrlOnLinkFlag
INTEGER,
swL3Ipv6AddressCtrlAutonomousFlag
INTEGER,
swL3Ipv6AddressCtrlState
RowStatus
}
swL3Ipv6AddressCtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the IP interface. "
::= { swL3Ipv6AddressCtrlEntry 1 }
swL3Ipv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the IPv6 address."
::= { swL3Ipv6AddressCtrlEntry 2 }
swL3Ipv6AddressCtrlPrefixLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the prefix length of this IPv6 address."
::= { swL3Ipv6AddressCtrlEntry 3 }
swL3Ipv6AddressCtrlPreferredLifeTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains in preferred state.
For an infinite valid lifetime, the value can be set to 0xffffffff."
::= { swL3Ipv6AddressCtrlEntry 4 }
swL3Ipv6AddressCtrlValidLifeTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains valid.
For an infinite valid lifetime, the value can be set to 0xffffffff."
::= { swL3Ipv6AddressCtrlEntry 5 }
swL3Ipv6AddressCtrlOnLinkFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, the address implied by the specified prefix is available
on the link where the RA message is received."
::= { swL3Ipv6AddressCtrlEntry 6 }
swL3Ipv6AddressCtrlAutonomousFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, the specified prefix will be used to create an autonomous address configuration."
::= { swL3Ipv6AddressCtrlEntry 7 }
swL3Ipv6AddressCtrlState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table."
::= { swL3Ipv6AddressCtrlEntry 8 }
swL3IpCtrlAllIpIfState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates all interface function state of the device."
::= { swL3IpCtrlMgmt 7 }
swL3LoopBackIpCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3LoopBackIpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains loopback IP interface information."
::= { swL3IpCtrlMgmt 8 }
swL3LoopBackIpCtrlEntry OBJECT-TYPE
SYNTAX SwL3LoopBackIpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about a specific loopback IP interface."
INDEX { swL3LoopBackIpCtrlInterfaceName }
::= { swL3LoopBackIpCtrlTable 1 }
SwL3LoopBackIpCtrlEntry ::=
SEQUENCE {
swL3LoopBackIpCtrlInterfaceName
DisplayString,
swL3LoopBackIpCtrlIfIndex
INTEGER,
swL3LoopBackIpCtrlIpAddr
IpAddress,
swL3LoopBackIpCtrlIpSubnetMask
IpAddress,
swL3LoopBackIpCtrlAdminState
INTEGER,
swL3LoopBackIpCtrlRowStatus
RowStatus
}
swL3LoopBackIpCtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the loopback IP interface."
::= { swL3LoopBackIpCtrlEntry 1 }
swL3LoopBackIpCtrlIfIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object uniquely identifies the loopback IP interface number in the
swL3LoopBackIpCtrlTable."
::= { swL3LoopBackIpCtrlEntry 2 }
swL3LoopBackIpCtrlIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the loopback interface. This object only can take the
value of the unicast IP address."
::= { swL3LoopBackIpCtrlEntry 3 }
swL3LoopBackIpCtrlIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP net mask for this loopback interface."
::= { swL3LoopBackIpCtrlEntry 4 }
swL3LoopBackIpCtrlAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the loopback IP interface."
::= { swL3LoopBackIpCtrlEntry 5 }
swL3LoopBackIpCtrlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table."
::= { swL3LoopBackIpCtrlEntry 6 }
-- ********************************************************************
-- swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 }
-- ********************************************************************
swL3IpFdbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3IpFdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets."
::= { swL3IpFdbMgmt 1 }
swL3IpFdbInfoEntry OBJECT-TYPE
SYNTAX SwL3IpFdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific IP address for which the bridge
has some forwarding and/or filtering information."
INDEX { swL3IpFdbInfoIpAddr }
::= { swL3IpFdbInfoTable 1 }
SwL3IpFdbInfoEntry ::=
SEQUENCE {
-- swL3IpFdbInfoRdIndex
-- INTEGER,
swL3IpFdbInfoIpAddr
IpAddress,
swL3IpFdbInfoIpSubnetMask
IpAddress,
swL3IpFdbInfoPort
INTEGER,
swL3IpFdbInfoType
INTEGER
}
-- swL3IpFdbInfoRdIndex OBJECT-TYPE
-- SYNTAX INTEGER(0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The object indicates the IP routing domain index, and should
-- be associated with one of swL3IpDomainStatsIndex."
-- ::= { swL3IpFdbInfoEntry 1 }
swL3IpFdbInfoIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A IP address for which switch has forwarding and/or filtering
information."
::= { swL3IpFdbInfoEntry 1 }
swL3IpFdbInfoIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A IP net mask for this interface for which the switch has
forwarding and/or filtering information."
::= { swL3IpFdbInfoEntry 2 }
swL3IpFdbInfoPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which
packets having an IP address equal to the value of the
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
value of '0' indicates that the port number has not been learned
but that switch does have some forwarding/filtering information
about this address."
::= { swL3IpFdbInfoEntry 3 }
swL3IpFdbInfoType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
static(2),
dynamic(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry."
::= { swL3IpFdbInfoEntry 4 }
-- ********************************************************************
-- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 }
-- ********************************************************************
-- swL3IpFilterAddrConfig OBJECT IDENTIFIER ::= { swL3IpFilterMgmt 1 }
-- swL3IpFilterAddrMaxSupportedEntries OBJECT-TYPE
-- SYNTAX INTEGER(0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Maximum number of entries in the IP address filtering table
-- (swL3IpFilterAddrCtrlTable) ."
-- ::= { swL3IpFilterAddrConfig 1 }
-- swL3IpFilterAddrCurrentTotalEntries OBJECT-TYPE
-- SYNTAX INTEGER(0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Current applied number of entries in the IP address filtering
-- table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it
-- means there are two entries in swL3IpFilterAddrCtrlTable."
-- ::= { swL3IpFilterAddrConfig 2 }
-- swL3IpFilterAddrCtrlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL3IpFilterAddrCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table defines the information for the device to filter packets
-- with specific IP addresses (either as the DA and/or as the SA).
-- The IP address can be either a unicast address or a multicast address.
-- This table has a higher priority then both the static FDB table and
-- the IGMP table. It means that if an IP address appears in this table
-- it will also appear on the static FDB table, the device will use the
-- information provided in this table to process the packet."
-- ::= { swL3IpFilterAddrConfig 3 }
-- swL3IpFilterAddrCtrlEntry OBJECT-TYPE
-- SYNTAX SwL3IpFilterAddrCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information about a specific unicast/multicast IP
-- address for which the switch has filtering information."
-- INDEX { swL3IpFilterAddrIpAddr }
-- ::= { swL3IpFilterAddrCtrlTable 1 }
-- SwL3IpFilterAddrCtrlEntry ::=
-- SEQUENCE {
-- swL3IpFilterAddrIpAddr
-- IpAddress,
-- swL3IpFilterAddrIpSktGE
-- INTEGER,
-- swL3IpFilterAddrIpSktLE
-- INTEGER,
-- swL3IpFilterAddrCtrlState
-- INTEGER
-- }
-- swL3IpFilterAddrIpAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates a unicast/multicast IP address for which
-- the switch has filtering information. But if the
-- swL3IpFilterAddrCtrlState = src-addr, then the object can not be
-- a multicast IP address (Class D IP address)."
-- ::= { swL3IpFilterAddrCtrlEntry 1 }
-- swL3IpFilterAddrIpSktGE OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates a socket number which should be greater than
-- or equal to the used socket number"
-- ::= { swL3IpFilterAddrCtrlEntry 2 }
-- swL3IpFilterAddrIpSktLE OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates a socket number which should be less than
-- or equal to the used socket number"
-- ::= { swL3IpFilterAddrCtrlEntry 3 }
-- swL3IpFilterAddrCtrlState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- dst-addr(2),
-- src-addr(3),
-- dst-src-addr(4),
-- invalid(5)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates the status of this entry.
-- other (1) - This entry is currently in use but the conditions
-- under which it will remain so are different from each of the
-- following values.
-- dst-addr (2) - Received frames's destination addresses are
-- currently filtered when they match with an IP
-- address entry of the table.
-- src-addr (3) - Received frames's source addresses are currently
-- filtered when they match with an IP address entry of
-- the table.
-- dst-src-addr (4) - Received frames's destination addresses or
-- source addresses are currently filtered when they match
-- with the IP address of an entry on the table.
-- invalid (5) <20>V If this value is written to the object, the
-- corresponding entry will be removed from the table."
-- ::= { swL3IpFilterAddrCtrlEntry 2 }
-- ********************************************************************
-- swL3IpArpAgingTime OBJECT IDENTIFIER ::= { swL3IpMgmt 4 }
-- ********************************************************************
swL3IpArpAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period in minutes for aging out dynamically learned
arp information."
::= { swL3IpMgmt 4 }
-- ********************************************************************
-- swL3IpStaticRouteTable OBJECT IDENTIFIER ::= { swL3IpMgmt 5 }
-- ********************************************************************
swL3IpStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3IpStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IP static Routing table."
::= { swL3IpMgmt 5 }
swL3IpStaticRouteEntry OBJECT-TYPE
SYNTAX SwL3IpStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination, under a particular policy.
Once an entry be built,it shouldn't be modified.That is,it just support create and
delete action."
INDEX {
swL3IpStaticRouteDest,
swL3IpStaticRouteMask,
swL3IpStaticRouteNextHop
}
::= { swL3IpStaticRouteTable 1 }
SwL3IpStaticRouteEntry ::=
SEQUENCE {
swL3IpStaticRouteDest
IpAddress,
swL3IpStaticRouteMask
IpAddress,
swL3IpStaticRouteBkupState
INTEGER,
swL3IpStaticRouteNextHop
IpAddress,
swL3IpStaticRouteMetric
INTEGER,
swL3IpStaticRouteStatus
INTEGER,
swL3IpStaticRouteWeight
INTEGER
}
swL3IpStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
swL3IpStaticRouteMask object is not equal to x."
::= { swL3IpStaticRouteEntry 1 }
swL3IpStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the swL3IpStaticRouteMask by reference to the IP
Address Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
swL3IpStaticRouteDest object is not equal to
swL3IpStaticRouteDest."
::= { swL3IpStaticRouteEntry 2 }
swL3IpStaticRouteBkupState OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
backup(2),
none(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing state for this route.The value SHOULD be
primary(1) or backup(2)."
::= { swL3IpStaticRouteEntry 3 }
swL3IpStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the IP address for the next hop router.
An IP address of 255.255.255.255 denotes a Null interface
as the next hop."
::= { swL3IpStaticRouteEntry 4 }
swL3IpStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing metric for this route."
::= { swL3IpStaticRouteEntry 5 }
swL3IpStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3),
active(4),
inActive(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.
active(4) - the nextHop of this entry exists in the ARP table.
inActive(5) - the next hop of this entry does not exist in the
ARP table."
::= { swL3IpStaticRouteEntry 6 }
swL3IpStaticRouteWeight OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the weight value. Used for the weighted multipath."
::= { swL3IpStaticRouteEntry 7 }
-- ********************************************************************
-- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 3 }
-- ********************************************************************
swL3RelayDnsState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the DNS Relay function is enabled or
disabled."
::= { swL3RelayDnsMgmt 1 }
swL3RelayDnsPrimaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the address of the primary DNS server."
::= { swL3RelayDnsMgmt 2 }
swL3RelayDnsSecondaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the address of the secondary DNS server."
::= { swL3RelayDnsMgmt 3 }
swL3RelayDnsCacheState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DNS Relay cache is enabled or
disabled."
::= { swL3RelayDnsMgmt 4 }
swL3RelayDnsStaticTableState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DNS Relay static table is enabled or
disabled."
::= { swL3RelayDnsMgmt 5 }
swL3RelayDnsCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3RelayDnsCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table displays the current DNS relay static table."
::= { swL3RelayDnsMgmt 6 }
swL3RelayDnsCtrlEntry OBJECT-TYPE
SYNTAX SwL3RelayDnsCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information display the current DNS relay static
table."
INDEX { swL3RelayDnsCtrlDomainName, swL3RelayDnsCtrlIpAddr}
::= { swL3RelayDnsCtrlTable 1 }
SwL3RelayDnsCtrlEntry ::=
SEQUENCE {
swL3RelayDnsCtrlDomainName
DisplayString,
swL3RelayDnsCtrlIpAddr
IpAddress,
swL3RelayDnsCtrlState
INTEGER
}
swL3RelayDnsCtrlDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The domain name of the entry."
::= { swL3RelayDnsCtrlEntry 1 }
swL3RelayDnsCtrlIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the entry."
::= { swL3RelayDnsCtrlEntry 2 }
swL3RelayDnsCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table."
::= { swL3RelayDnsCtrlEntry 3 }
swL3RelayDnsCtrlHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3RelayDnsCtrlHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table displays the current DNS relay static host record table."
::= { swL3RelayDnsMgmt 7 }
swL3RelayDnsCtrlHostEntry OBJECT-TYPE
SYNTAX SwL3RelayDnsCtrlHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information display the current DNS relay static
host record table."
INDEX { swL3RelayDnsCtrlHostDomainName, swL3RelayDnsCtrlHostAddressType, swL3RelayDnsCtrlHostAddress}
::= { swL3RelayDnsCtrlHostTable 1 }
SwL3RelayDnsCtrlHostEntry ::=
SEQUENCE {
swL3RelayDnsCtrlHostDomainName
DisplayString,
swL3RelayDnsCtrlHostAddressType
InetAddressType,
swL3RelayDnsCtrlHostAddress
InetAddress,
swL3RelayDnsCtrlHostRowStatus
RowStatus
}
swL3RelayDnsCtrlHostDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The domain name of the entry."
::= { swL3RelayDnsCtrlHostEntry 1 }
swL3RelayDnsCtrlHostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of DnsCtrlHostAddress."
::= { swL3RelayDnsCtrlHostEntry 2 }
swL3RelayDnsCtrlHostAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the host."
::= { swL3RelayDnsCtrlHostEntry 3 }
swL3RelayDnsCtrlHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object manages this entry."
::= { swL3RelayDnsCtrlHostEntry 4 }
-- ********************************************************************
-- swL3Md5Table OBJECT IDENTIFIER ::= { swL3MgmtMIB 4 }
-- ********************************************************************
swL3Md5Table OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3Md5Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table displays the current MD5 key table."
::= { swL3MgmtMIB 4 }
swL3Md5Entry OBJECT-TYPE
SYNTAX SwL3Md5Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information displays the current MD5 key table."
INDEX { swL3Md5KeyId}
::= { swL3Md5Table 1 }
SwL3Md5Entry ::=
SEQUENCE {
swL3Md5KeyId
INTEGER,
swL3Md5Key
DisplayString,
swL3Md5RowStatus
RowStatus
}
swL3Md5KeyId OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key ID."
::= { swL3Md5Entry 1 }
swL3Md5Key OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An MD5 password of up to 16 bytes."
::= { swL3Md5Entry 2 }
swL3Md5RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL3Md5Entry 3 }
-- ********************************************************************
-- swL3RouteRedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 5 }
-- ********************************************************************
swL3RouteRedistriTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3RouteRedistriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route redistribution allows routers on the network that are
running different routing protocols to exchange routing
information. This is accomplished by comparing the routes stored
in the varios routers' routing tables and assigning appropriate
metrics. This information is then exchanged among the various
routers according to the individual routers current routing
protocol."
::= { swL3MgmtMIB 5 }
swL3RouteRedistriEntry OBJECT-TYPE
SYNTAX SwL3RouteRedistriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information displaying the route redistribution table."
INDEX { swL3RouteRedistriSrcProtocol, swL3RouteRedistriDstProtocol}
::= { swL3RouteRedistriTable 1 }
SwL3RouteRedistriEntry ::=
SEQUENCE {
swL3RouteRedistriSrcProtocol
INTEGER,
swL3RouteRedistriDstProtocol
INTEGER,
swL3RouteRedistriType
INTEGER,
swL3RouteRedistriMetric
Unsigned32,
swL3RouteRedistriRowStatus
RowStatus
-- swL3RouteRedistriRouteMapName
-- DisplayString
}
swL3RouteRedistriSrcProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
rip(2),
ospf(3),
static(4),
local(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows the selection of the protocol of the source device."
::= { swL3RouteRedistriEntry 1 }
swL3RouteRedistriDstProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
rip(2),
ospf(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows the selection of the protocol of the destination device."
::= { swL3RouteRedistriEntry 2 }
swL3RouteRedistriType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
all(2),
type-1(3),
type-2(4),
internal(5),
external(6),
inter-E1(7),
inter-E2(8),
extType1(9),
extType2(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows the selection of one of the methods for calculating
the metric value."
::= { swL3RouteRedistriEntry 3 }
swL3RouteRedistriMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows the entry of an OSPF interface cost. This is analogous
to a Hop Count in the RIP routing protocol. The value '0'
indicates default value."
::= { swL3RouteRedistriEntry 4 }
swL3RouteRedistriRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL3RouteRedistriEntry 5 }
-- swL3RouteRedistriRouteMapName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(1..16))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This Object just works when the destination protocol is BGP
-- and indicate the route-map working when redistribute the route
-- to BGP."
-- ::= { swL3RouteRedistriEntry 6 }
-- ********************************************************************
-- swL3OspfHostTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 6 }
-- ********************************************************************
swL3OspfHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3OspfHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of Hosts, and their metrics, that the router will
advertise as host routes."
::= { swL3MgmtMIB 6 }
swL3OspfHostEntry OBJECT-TYPE
SYNTAX SwL3OspfHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A metric to be advertised, for a given type of service, when a
given host is reachable."
INDEX { swL3OspfHostIpAddress, swL3OspfHostTOS }
::= { swL3OspfHostTable 1 }
SwL3OspfHostEntry ::=
SEQUENCE {
swL3OspfHostIpAddress
IpAddress,
swL3OspfHostTOS
TOSType,
swL3OspfHostMetric
Metric,
swL3OspfHostAreaID
AreaID,
swL3OspfHostStatus
RowStatus
}
swL3OspfHostIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Host."
::= { swL3OspfHostEntry 1 }
swL3OspfHostTOS OBJECT-TYPE
SYNTAX TOSType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Type of Service of the route being configured."
::= { swL3OspfHostEntry 2 }
swL3OspfHostMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Metric to be advertised."
::= { swL3OspfHostEntry 3 }
swL3OspfHostAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Area the Host Entry is to be found within. By default, the
area that a subsuming OSPF interface is in, or 0.0.0.0"
::= { swL3OspfHostEntry 4 }
swL3OspfHostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the entry. Setting it to
'invalid' has the effect of rendering it inoperative. The internal
effect (row removal) is implementation dependent."
::= { swL3OspfHostEntry 5 }
-- ********************************************************************
-- swL3ospfVirtIfTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 7 }
-- ********************************************************************
-- OSPF Virtual Interface Table(from rfc1850,modify by Scott Sung)
-- The Virtual Interface Table describes the virtual
-- links that the OSPF Process is configured to
-- carry on.
swL3ospfVirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3OspfVirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about this router's virtual inter-
faces."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link
parameters"
::= { swL3MgmtMIB 7 }
swL3ospfVirtIfEntry OBJECT-TYPE
SYNTAX SwL3OspfVirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single Virtual Interface."
INDEX { swL3ospfVirtIfAreaId, swL3ospfVirtIfNeighbor }
::= { swL3ospfVirtIfTable 1 }
SwL3OspfVirtIfEntry ::=
SEQUENCE {
swL3ospfVirtIfAreaId
AreaID,
swL3ospfVirtIfNeighbor
RouterID,
swL3ospfVirtIfTransitDelay
UpToMaxAge,
swL3ospfVirtIfRetransInterval
UpToMaxAge,
swL3ospfVirtIfHelloInterval
HelloRange,
swL3ospfVirtIfRtrDeadInterval
Integer32,
swL3ospfVirtIfState
INTEGER,
swL3ospfVirtIfEvents
Counter32,
swL3ospfVirtIfAuthType
INTEGER,
swL3ospfVirtIfAuthKey
OCTET STRING,
swL3ospfVirtIfAuthKeyID
INTEGER,
swL3ospfVirtIfStatus
RowStatus
}
swL3ospfVirtIfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0"
::= { swL3ospfVirtIfEntry 1 }
swL3ospfVirtIfNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Virtual Neighbor."
::= { swL3ospfVirtIfEntry 2 }
swL3ospfVirtIfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link- state update packet over this
interface."
DEFVAL { 1 }
::= { swL3ospfVirtIfEntry 3 }
swL3ospfVirtIfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time."
DEFVAL { 5 }
::= { swL3ospfVirtIfEntry 4 }
swL3ospfVirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor."
DEFVAL { 10 }
::= { swL3ospfVirtIfEntry 5 }
swL3ospfVirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor."
DEFVAL { 60 }
::= { swL3ospfVirtIfEntry 6 }
swL3ospfVirtIfState OBJECT-TYPE
SYNTAX INTEGER {
down (1), -- these use the same encoding
pointToPoint (4) -- as the ospfIfTable
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF virtual interface states."
DEFVAL { down }
::= { swL3ospfVirtIfEntry 7 }
swL3ospfVirtIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state changes or error events on
this Virtual Link"
::= { swL3ospfVirtIfEntry 8 }
swL3ospfVirtIfAuthType OBJECT-TYPE
SYNTAX INTEGER (0..255)
-- none (0),
-- simplePassword (1)
-- md5 (2)
-- reserved for specification by IANA (> 2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication type specified for a virtu-
al interface. Additional authentication types
may be assigned locally."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { swL3ospfVirtIfEntry 9 }
swL3ospfVirtIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If Authentication Type is simplePassword, the
device will left adjust and zero fill to 8 oc-
tets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
::= { swL3ospfVirtIfEntry 10 }
swL3ospfVirtIfAuthKeyID OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MD5 key ID."
::= { swL3ospfVirtIfEntry 11 }
swL3ospfVirtIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent."
::= { swL3ospfVirtIfEntry 12 }
-- OSPF Interface Table
-- The OSPF Interface Table augments the ipAddrTable
-- with OSPF specific information.
swL3ospfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3OspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { swL3MgmtMIB 8 }
swL3ospfIfEntry OBJECT-TYPE
SYNTAX SwL3OspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF."
INDEX { swL3ospfIfIpAddress, swL3ospfAddressLessIf }
::= { swL3ospfIfTable 1 }
SwL3OspfIfEntry ::=
SEQUENCE {
swL3ospfIfIpAddress
IpAddress,
swL3ospfAddressLessIf
Integer32,
swL3ospfIfAreaId
AreaID,
swL3ospfIfType
INTEGER,
swL3ospfIfAdminStat
Status,
swL3ospfIfRtrPriority
DesignatedRouterPriority,
swL3ospfIfTransitDelay
UpToMaxAge,
swL3ospfIfRetransInterval
UpToMaxAge,
swL3ospfIfHelloInterval
HelloRange,
swL3ospfIfRtrDeadInterval
PositiveInteger,
swL3ospfIfPollInterval
PositiveInteger,
swL3ospfIfState
INTEGER,
swL3ospfIfDesignatedRouter
IpAddress,
swL3ospfIfBackupDesignatedRouter
IpAddress,
swL3ospfIfEvents
Counter32,
swL3ospfIfMulticastForwarding
INTEGER,
swL3ospfIfDemand
TruthValue,
swL3ospfIfAuthType
INTEGER,
swL3ospfIfAuthKey
OCTET STRING,
swL3ospfIfAuthKeyID
INTEGER,
swL3ospfIfPassiveMode
INTEGER,
-- swL3ospfIfStatus
-- RowStatus
swL3ospfIfMetric
Metric
}
swL3ospfIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { swL3ospfIfEntry 1 }
swL3ospfAddressLessIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { swL3ospfIfEntry 2 }
swL3ospfIfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { swL3ospfIfEntry 3 }
swL3ospfIfType OBJECT-TYPE
SYNTAX INTEGER {
broadcast (1),
nbma (2),
pointToPoint (3),
pointToMultipoint (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'."
::= { swL3ospfIfEntry 4 }
swL3ospfIfAdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPF."
DEFVAL { enabled }
::= { swL3ospfIfEntry 5 }
swL3ospfIfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker."
DEFVAL { 1 }
::= { swL3ospfIfEntry 6 }
swL3ospfIfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link state update packet over this
interface."
DEFVAL { 1 }
::= { swL3ospfIfEntry 7 }
swL3ospfIfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets."
DEFVAL { 5 }
::= { swL3ospfIfEntry 8 }
swL3ospfIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network."
DEFVAL { 10 }
::= { swL3ospfIfEntry 9 }
swL3ospfIfRtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network."
DEFVAL { 40 }
::= { swL3ospfIfEntry 10 }
swL3ospfIfPollInterval OBJECT-TYPE
SYNTAX PositiveInteger
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor."
DEFVAL { 120 }
::= { swL3ospfIfEntry 11 }
swL3ospfIfState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
loopback (2),
waiting (3),
pointToPoint (4),
designatedRouter (5),
backupDesignatedRouter (6),
otherDesignatedRouter (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface State."
DEFVAL { down }
::= { swL3ospfIfEntry 12 }
swL3ospfIfDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Designated Router."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { swL3ospfIfEntry 13 }
swL3ospfIfBackupDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Backup Designated
Router."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { swL3ospfIfEntry 14 }
swL3ospfIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state, or an error has occurred."
::= { swL3ospfIfEntry 15 }
swL3ospfIfMulticastForwarding OBJECT-TYPE
SYNTAX INTEGER {
blocked (1), -- no multicast forwarding
multicast (2), -- using multicast address
unicast (3) -- to each OSPF neighbor
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting ospfMulticastForwarding to 0 effective-
ly disables all multicast forwarding."
DEFVAL { blocked }
::= { swL3ospfIfEntry 16 }
swL3ospfIfDemand OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface."
DEFVAL { false }
::= { swL3ospfIfEntry 17 }
swL3ospfIfAuthType OBJECT-TYPE
SYNTAX INTEGER (0..255)
-- none (0),
-- simplePassword (1)
-- md5 (2)
-- reserved for specification by IANA (> 2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication type specified for an in-
terface. Additional authentication types may
be assigned locally."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { swL3ospfIfEntry 18 }
swL3ospfIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, ospfIfAuthKey always returns an Oc-
tet String of length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
::= { swL3ospfIfEntry 19 }
swL3ospfIfAuthKeyID OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MD5 key ID."
::= { swL3ospfIfEntry 20 }
swL3ospfIfPassiveMode OBJECT-TYPE
SYNTAX INTEGER{
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Assign the designated entry to be a passive interface."
::= { swL3ospfIfEntry 21 }
-- swL3ospfIfStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This variable displays the status of the en-
-- try. Setting it to 'invalid' has the effect of
-- rendering it inoperative. The internal effect
-- (row removal) is implementation dependent."
-- ::= { swL3ospfIfEntry 22 }
swL3ospfIfMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric to be advertised."
::= { swL3ospfIfEntry 23 }
-- *******************************************************************
-- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 }
-- *******************************************************************
swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 }
swL3RoutePreferenceRIP OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of RIP."
::= { swL3RoutePreference 1 }
swL3RoutePreferenceOSPFIntra OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of OSPF Intra."
::= { swL3RoutePreference 2 }
swL3RoutePreferenceStatic OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of Static."
::= { swL3RoutePreference 3 }
swL3RoutePreferenceLocal OBJECT-TYPE
SYNTAX INTEGER (0..999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to read the route preference of Local."
::= { swL3RoutePreference 4 }
swL3RoutePreferenceOSPFInter OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of OSPF Inter."
::= { swL3RoutePreference 5 }
swL3RoutePreferenceOSPFExtT1 OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of OSPFExtT1."
::= { swL3RoutePreference 6 }
swL3RoutePreferenceOSPFExtT2 OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of OSPF ExtT2."
::= { swL3RoutePreference 7 }
swL3RoutePreferenceDefault OBJECT-TYPE
SYNTAX INTEGER (1..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the route preference of Default route."
::= { swL3RoutePreference 8 }
-- swL3RoutePreferenceEBGP OBJECT-TYPE
-- SYNTAX INTEGER (1..999)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Used to configure the route preference of EBGP."
-- ::= { swL3RoutePreference 9 }
--
-- swL3RoutePreferenceIBGP OBJECT-TYPE
-- SYNTAX INTEGER (1..999)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Used to configure the route preference of IBGP."
-- ::= { swL3RoutePreference 10 }
-- -----------------------------------------------------------------------------
-- The OSPF Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
-- -----------------------------------------------------------------------------
swL3ospfAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3ospfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of the router's
attached areas."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Struc-
ture"
::= { swL3MgmtMIB 10 }
swL3ospfAreaEntry OBJECT-TYPE
SYNTAX SwL3ospfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas."
INDEX { swL3ospfAreaId }
::= { swL3ospfAreaTable 1 }
SwL3ospfAreaEntry ::=
SEQUENCE {
swL3ospfAreaId
AreaID,
swL3ospfAreaType
INTEGER,
swL3ospfAreaSummaryState
INTEGER,
swL3ospfAreaMetric
Integer32,
swL3ospfAreaTranslateState
INTEGER,
swL3ospfAreaStatus
RowStatus
}
swL3ospfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone."
::= { swL3ospfAreaEntry 1 }
swL3ospfAreaType OBJECT-TYPE
SYNTAX INTEGER{
normal(1),
stub(2),
nssa(3)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The type specified for an area."
::= { swL3ospfAreaEntry 2 }
swL3ospfAreaSummaryState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether the summary LSA is effective for this area."
::= { swL3ospfAreaEntry 3 }
swL3ospfAreaMetric OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the metric (1 - 65535; 0 for auto cost) of this area."
::= { swL3ospfAreaEntry 4 }
swL3ospfAreaTranslateState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"."
::= { swL3ospfAreaEntry 5 }
swL3ospfAreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent."
::= { swL3ospfAreaEntry 6 }
-- -----------------------------------------------------------------------------
--swL3OspfLsdbMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 13 }
-- -----------------------------------------------------------------------------
-- OSPF Link State Database
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
swL3OspfInternalLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3OspfInternalLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Link State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { swL3OspfLsdbMgmt 1 }
swL3OspfInternalLsdbEntry OBJECT-TYPE
SYNTAX SwL3OspfInternalLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { swL3OspfInternalLsdbAreaId, swL3OspfInternalLsdbType,
swL3OspfInternalLsdbLsid, swL3OspfInternalLsdbRouterId }
::= { swL3OspfInternalLsdbTable 1 }
SwL3OspfInternalLsdbEntry ::=
SEQUENCE {
swL3OspfInternalLsdbAreaId
AreaID,
swL3OspfInternalLsdbType
INTEGER,
swL3OspfInternalLsdbLsid
IpAddress,
swL3OspfInternalLsdbRouterId
RouterID,
swL3OspfInternalLsdbMetric
Integer32,
swL3OspfInternalLsdbSequenceNo
OCTET STRING,
swL3OspfInternalLsdbAge
Unsigned32,
swL3OspfInternalLsdbChecksum
Integer32
}
swL3OspfInternalLsdbAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
::= { swL3OspfInternalLsdbEntry 1 }
-- External Link State Advertisements are permitted
-- for backward compatibility, but should be displayed in
-- the ospfExtLsdbTable rather than here.
swL3OspfInternalLsdbType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5), -- but see ospfExtLsdbTable
multicastLink (6),
nssaExternalLink (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
::= { swL3OspfInternalLsdbEntry 2 }
swL3OspfInternalLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
::= { swL3OspfInternalLsdbEntry 3 }
swL3OspfInternalLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
::= { swL3OspfInternalLsdbEntry 4 }
swL3OspfInternalLsdbMetric OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enter the metric (1 - 65535; 0 for auto cost) of this area."
::= { swL3OspfInternalLsdbEntry 5 }
swL3OspfInternalLsdbSequenceNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
::= { swL3OspfInternalLsdbEntry 6 }
swL3OspfInternalLsdbAge OBJECT-TYPE
SYNTAX Unsigned32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
::= { swL3OspfInternalLsdbEntry 7 }
swL3OspfInternalLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
::= { swL3OspfInternalLsdbEntry 8 }
-- OSPF Link State Database, External
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- This table is identical to the OSPF LSDB Table in
-- format, but contains only External Link State
-- Advertisements. The purpose is to allow external
-- LSAs to be displayed once for the router rather
-- than once in each non-stub area.
swL3OspfExternalLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3OspfExternalLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Links State Database."
::= { swL3OspfLsdbMgmt 2 }
swL3OspfExternalLsdbEntry OBJECT-TYPE
SYNTAX SwL3OspfExternalLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { swL3OspfExternalLsdbType, swL3OspfExternalLsdbLsid, swL3OspfExternalLsdbRouterId }
::= { swL3OspfExternalLsdbTable 1 }
SwL3OspfExternalLsdbEntry ::=
SEQUENCE {
swL3OspfExternalLsdbType
INTEGER,
swL3OspfExternalLsdbLsid
IpAddress,
swL3OspfExternalLsdbRouterId
RouterID,
swL3OspfExternalLsdbMetric
Integer32,
swL3OspfExternalLsdbMetricType
INTEGER,
swL3OspfExternalLsdbSequenceNo
OCTET STRING,
swL3OspfExternalLsdbAge
Unsigned32,
swL3OspfExternalLsdbChecksum
Integer32,
swL3OspfExternalLsdbForwardingAddress
IpAddress,
swL3OspfExternalLsdbRouteTag
OCTET STRING
}
swL3OspfExternalLsdbType OBJECT-TYPE
SYNTAX INTEGER {
asExternalLink (5),
nssaExternalLink (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
::= { swL3OspfExternalLsdbEntry 1 }
swL3OspfExternalLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
::= { swL3OspfExternalLsdbEntry 2 }
swL3OspfExternalLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
::= { swL3OspfExternalLsdbEntry 3 }
swL3OspfExternalLsdbMetric OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enter the metric (1 - 65535; 0 for auto cost) of this area."
::= { swL3OspfExternalLsdbEntry 4 }
swL3OspfExternalLsdbMetricType OBJECT-TYPE
SYNTAX INTEGER {
unrecognized(0),
type-1(1),
type-2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enter the metric type of this area."
::= { swL3OspfExternalLsdbEntry 5 }
swL3OspfExternalLsdbSequenceNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
::= { swL3OspfExternalLsdbEntry 6 }
swL3OspfExternalLsdbAge OBJECT-TYPE
SYNTAX Unsigned32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
::= { swL3OspfExternalLsdbEntry 7 }
swL3OspfExternalLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, except the
age field. The age field is the exception so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
::= { swL3OspfExternalLsdbEntry 8 }
swL3OspfExternalLsdbForwardingAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the forwarding address."
::= { swL3OspfExternalLsdbEntry 9 }
swL3OspfExternalLsdbRouteTag OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the route tag."
::= { swL3OspfExternalLsdbEntry 10 }
-- -----------------------------------------------------------------------------
-- swL3VrrpOperMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 14 }
-- -----------------------------------------------------------------------------
-- -----------------------------------------------------------------------------
-- L3 VRRP Operations Table
-- -----------------------------------------------------------------------------
swL3VrrpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL3VrrpOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'swL3vrrpOperEntry' items."
::= { swL3VrrpOperMgmt 1 }
swL3VrrpOperEntry OBJECT-TYPE
SYNTAX SwL3VrrpOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Rows in the table cannot be modified unless the value
of `swL3VrrpOperAdminState' is `disabled' and the
`swL3VrrpOperState' has transitioned to `initialize'."
INDEX { swL3VrrpOperIfIndex, swL3VrrpOperVrId }
::= { swL3VrrpOperTable 1 }
SwL3VrrpOperEntry ::=
SEQUENCE {
swL3VrrpOperIfIndex
Integer32,
swL3VrrpOperVrId
VrId,
swL3VrrpOperVirtualMacAddr
MacAddress,
swL3VrrpOperState
INTEGER,
swL3VrrpOperAdminState
INTEGER,
swL3VrrpOperPriority
Integer32,
swL3VrrpOperMasterIpAddr
IpAddress,
swL3VrrpOperCriticalIpAddr
IpAddress,
swL3VrrpOperCheckCriticalIpState
INTEGER,
swL3VrrpOperAuthType
INTEGER,
swL3VrrpOperAuthKey
OCTET STRING,
swL3VrrpOperAdvertisementInterval
Integer32,
swL3VrrpOperPreemptMode
TruthValue,
swL3VrrpOperVirtualRouterUpTime
TimeStamp,
swL3VrrpOperVirtualIpAddr
IpAddress,
swL3VrrpOperRowStatus
RowStatus
}
swL3VrrpOperIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which VRRP is
enabled."
::= { swL3VrrpOperEntry 1 }
swL3VrrpOperVrId OBJECT-TYPE
SYNTAX VrId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Virtual Router Identifier (VRID)."
::= { swL3VrrpOperEntry 2 }
swL3VrrpOperVirtualMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual MAC address of the virtual router. Although this
object can be derived from the 'swL3VrrpOperVrId' object, it is
defined so that it is easily obtainable by a management
application and can be included in VRRP-related SNMP traps."
::= { swL3VrrpOperEntry 3 }
swL3VrrpOperState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
backup(2),
master(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the virtual router. This object has
three defined values:
- `initialize', which indicates that all the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.
Setting the `swL3VrrpOperAdminState' object (below) initiates
transitions in the value of this object."
::= { swL3VrrpOperEntry 4 }
swL3VrrpOperAdminState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to `backup'
or `master', depending on the value of `swL3VrrpOperPriority'.
Setting the value to `down', will transition the
router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend on
other factors, such as the interface (IF) state.
The `swL3VrrpOperAdminState' object must be set to `down' prior
to modifying the other read-create objects in the conceptual
row. The value of the `swL3VrrpOperRowStatus' object (below)
must be `active', signifying that the conceptual row
is valid (i.e., the objects are correctly set),
in order for this object to be set to `up'."
DEFVAL { down }
::= { swL3VrrpOperEntry 5 }
swL3VrrpOperPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in VRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es)."
DEFVAL { 100 }
::= { swL3VrrpOperEntry 6 }
swL3VrrpOperMasterIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router."
::= { swL3VrrpOperEntry 7 }
swL3VrrpOperCriticalIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In the case where there is more than one IP address for
a given `ifIndex', this object is used to specify the IP
address that will become the `swL3VrrpOperMasterIpAddr', should
the virtual router transition from backup to master. If
this object is set to 0.0.0.0, the IP address which is
numerically lowest will be selected."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { swL3VrrpOperEntry 8 }
swL3VrrpOperCheckCriticalIpState OBJECT-TYPE
SYNTAX INTEGER{
other(0),
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Critical IP state."
::= { swL3VrrpOperEntry 9 }
swL3VrrpOperAuthType OBJECT-TYPE
SYNTAX INTEGER {
noAuthentication(1), -- VRRP protocol exchanges are not
-- authenticated.
simpleTextPassword(2), -- Exchanges are authenticated by a
-- clear text password.
ipAuthenticationHeader(3) -- Exchanges are authenticated using
-- the IP authentication header.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authentication type used for VRRP protocol exchanges between
virtual routers. This value of this object is the same for a
given ifIndex.
New enumerations to this list can only be added via a new
RFC on the standards track."
DEFVAL { noAuthentication }
::= { swL3VrrpOperEntry 10 }
swL3VrrpOperAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Authentication Key. This object is set according to
the value of the 'swL3VrrpOperAuthType' object
('simpleTextPassword' or 'ipAuthenticationHeader'). If the
length of the value is less than 16 octets, the agent will
left adjust and zero fill to 16 octets. The value of this
object is the same for a given ifIndex.
When read, swL3VrrpOperAuthKey always returns an Octet String
of length zero."
::= { swL3VrrpOperEntry 11 }
swL3VrrpOperAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (1..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements."
DEFVAL { 1 }
::= { swL3VrrpOperEntry 12 }
swL3VrrpOperPreemptMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether a higher priority virtual router will
preempt a lower priority master."
DEFVAL { true }
::= { swL3VrrpOperEntry 13 }
swL3VrrpOperVirtualRouterUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of the `sysUpTime' object when this
virtual router (i.e., the `swL3VrrpOperState') transitioned
out of `initialized'."
::= { swL3VrrpOperEntry 14 }
swL3VrrpOperVirtualIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The assigned IP addresses that a virtual router is
responsible for backing up."
::= { swL3VrrpOperEntry 15 }
swL3VrrpOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The rowstatus of
a currently active row in the vrrpOperTable is constrained
by the operational state of the corresponding virtual router.
When `vrrpOperRowStatus' is set to active(1), no other
objects in the conceptual row, with the exception of
`swL3VrrpOperAdminState', can be modified. Prior to setting the
`swL3VrrpOperRowStatus' object from `active' to a different value,
the `swL3VrrpOperAdminState' object must be set to `down' and the
`vrrpOperState' object be transitioned to `initialize'.
To create a row in this table, a manager sets this object
to either createAndGo(4) or createAndWait(5). Until instances
of all corresponding columns are appropriately configured,
the value of the corresponding instance of the `vrrpOperRowStatus'
column will be read as notReady(3).
In particular, a newly created row cannot be made active(1)
until (minimally) the corresponding instance of
`swL3VrrpOperVrId' has been set and there is at least one active
row in the `swL3VrrpAssoIpAddrTable' defining an associated
IP address for the virtual router."
::= { swL3VrrpOperEntry 16 }
-- swL3OspfECMPIpDestination OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If set to 'enabled (1)', the ECMP algorithm will include the destination IP."
-- DEFVAL {enabled}
-- ::={swL3OspfECMPMgmt 1}
--
-- swL3OspfECMPIpSource OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If set to 'enabled (1)', the ECMP algorithm will include the lower 5 bits of the source IP.
-- This attribution is mutually exclusive with crc_low and crc_high.
-- If set to 'enabled (1)', crc_low and crc_high will be excluded."
-- DEFVAL {disabled}
-- ::={swL3OspfECMPMgmt 2}
--
-- swL3OspfECMPCrcLow OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If set to 'enabled (1)', the ECMP algorithm will include the lower 5 bits of the CRC. This
-- attribution is mutually exclusive with crc_high and ip_source.
-- If set to 'enabled (1)', crc_high and ip_source will be excluded."
-- DEFVAL {enabled}
-- ::={swL3OspfECMPMgmt 3}
--
--swL3OspfECMPCrcHigh OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If set to 'enabled (1)', the ECMP algorithm will include the upper 5 bits of the CRC.
-- This attribution is mutually exclusive with ip_source and crc_low.
-- If set to 'enabled (1)', crc_low and ip_source will be excluded."
-- DEFVAL {disabled}
-- ::={swL3OspfECMPMgmt 4}
--
--swL3OspfECMPTCPorUDPport OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If set to 'enabled (1)', the ECMP algorithm will include the TCP or UDP port."
-- DEFVAL {disabled}
-- ::={swL3OspfECMPMgmt 5}
swL3OspfECMPState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the state of the OSPF ECMP function."
::={swL3OspfECMPMgmt 6}
-- -----------------------------------------------------------------------------
-- swL3OspfDefInfoOrigMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 18 }
-- -----------------------------------------------------------------------------
swL3OspfDefInfoOrigMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 18 }
swL3OspfDefInfoOriginate OBJECT-TYPE
SYNTAX INTEGER {
always (1),
default (2),
none (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the origination state of ospf default information origination."
DEFVAL { none }
::= { swL3OspfDefInfoOrigMgmt 1 }
swL3OspfDefInfoOrigMetricType OBJECT-TYPE
SYNTAX INTEGER {
type-1 (1),
type-2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the metric type of ospf default information origination."
DEFVAL { type-2 }
::= { swL3OspfDefInfoOrigMgmt 2 }
swL3OspfDefInfoOrigMetric OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the metric of ospf defaul information origination of this area."
::= { swL3OspfDefInfoOrigMgmt 3 }
END
View Git Blame Copy Permalink