4508 lines
155 KiB
Plaintext
4508 lines
155 KiB
Plaintext
CISCOSB-OSPF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB OSPF
|
|
-- OSPF Private MIB
|
|
-- Multi OSPF Instance support
|
|
-- based on OSPF standard MIB OSPF-MIB (rfc1850)
|
|
-- Version: 0.00
|
|
-- Date: 04 May 2011
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
|
|
Integer32, Unsigned32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
AreaID, RouterID, Metric, BigMetric, Status, PositiveInteger, HelloRange, UpToMaxAge, DesignatedRouterPriority, TOSType
|
|
FROM OSPF-MIB
|
|
mib-2 FROM RFC1213-MIB
|
|
DisplayString FROM SNMPv2-TC
|
|
switch001 FROM CISCOSB-MIB;
|
|
|
|
rlOspf MODULE-IDENTITY
|
|
LAST-UPDATED "201105041700Z" -- Wed May 04 17:00:00 PST 2011
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The private MIB module definition for Multi Instance OSPF MIB."
|
|
REVISION "201105041700Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { switch001 210 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Textual conventions
|
|
------------------------------------------------------------------------------
|
|
|
|
-- OSPF Process Id
|
|
|
|
RlOspfProcessID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An OSPF Process Identifier."
|
|
SYNTAX Integer32
|
|
|
|
-- Fast Hello Multiplier Range
|
|
|
|
RlOspfFastHelloMultiplierRange ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range of hello multipliers that determine how often
|
|
Fast Hellos are exchanged."
|
|
SYNTAX Integer32 (3..20)
|
|
|
|
-- Restart Helper Status
|
|
|
|
RlOspfRestartHelperStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the router is acting as a
|
|
hitless restart helper for a neighbor."
|
|
SYNTAX INTEGER {
|
|
notHelping(1),
|
|
helping(2)
|
|
}
|
|
|
|
-- Restart Exit Reason
|
|
|
|
RlOspfRestartExitReason ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for exiting an attempted graceful restart."
|
|
SYNTAX INTEGER {
|
|
none (1), -- none attempted
|
|
inProgress (2), -- restart in progress
|
|
completed (3), -- successfully completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to topology change.
|
|
}
|
|
|
|
-- Router Id Type
|
|
|
|
RlOspfRouterIdType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for exiting an attempted graceful restart."
|
|
SYNTAX INTEGER {
|
|
default (1), -- default value
|
|
manual (2) -- manually set by user
|
|
}
|
|
|
|
-- Authentication Type
|
|
|
|
RlOspfAuthenticationType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type."
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
simplePassword (1),
|
|
md5 (2),
|
|
hmac-sha-1 (3),
|
|
hmac-sha-256 (4),
|
|
hmac-sha-384 (5),
|
|
hmac-sha-512 (6),
|
|
|
|
null (9)
|
|
}
|
|
|
|
-- Admin Authentication Type
|
|
|
|
RlOspfAdminAuthenticationType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user configuration authentication type."
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
simplePassword (1),
|
|
key-chain (2),
|
|
md5 (3)
|
|
}
|
|
|
|
-- Refresh Interval
|
|
|
|
RlOspfUpToRefreshIntervalTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d-0"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values one might be able to configure for
|
|
variables bounded by the Refresh Interval."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix B, Architectural Constants"
|
|
SYNTAX Unsigned32 (1..'FFFF'h)
|
|
|
|
-- Dead Interval
|
|
|
|
RlOspfDeadIntervalRangeTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d-0"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range, in seconds, of dead interval value."
|
|
REFERENCE
|
|
"OSPF for IPv6, Appendix C.3, Router Interface
|
|
Parameters"
|
|
SYNTAX Unsigned32 (1..'FFFF'h)
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Instance General Variables
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfInstance OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selected OSPF Process ID. Additional key value for
|
|
old fashion usage of OSPF standard MIB to support
|
|
multi OSPF instance."
|
|
::= { rlOspf 1 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF General Group Table
|
|
|
|
-- The OSPF Variables General Group Data Structure contains information
|
|
-- apply globally to the Router's (OSPF Process).
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfGeneralGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfGeneralGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Instance General Variables"
|
|
::= { rlOspf 2 }
|
|
|
|
|
|
rlOspfGeneralGroupEntry OBJECT-TYPE
|
|
SYNTAX RlOspfGeneralGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured global parame-
|
|
ters to the Router OSPF Process."
|
|
INDEX { rlOspfProcessId }
|
|
::= { rlOspfGeneralGroupTable 1 }
|
|
|
|
RlOspfGeneralGroupEntry ::=
|
|
SEQUENCE {
|
|
rlOspfProcessId
|
|
RlOspfProcessID,
|
|
rlOspfRouterId
|
|
RouterID,
|
|
rlOspfAdminStat
|
|
Status,
|
|
rlOspfVersionNumber
|
|
INTEGER,
|
|
rlOspfAreaBdrRtrStatus
|
|
TruthValue,
|
|
rlOspfASBdrRtrStatus
|
|
TruthValue,
|
|
rlOspfExternLsaCount
|
|
Gauge32,
|
|
rlOspfExternLsaCksumSum
|
|
Integer32,
|
|
rlOspfTOSSupport
|
|
TruthValue,
|
|
rlOspfOriginateNewLsas
|
|
Counter32,
|
|
rlOspfRxNewLsas
|
|
Counter32,
|
|
rlOspfExtLsdbLimit
|
|
Integer32,
|
|
rlOspfMulticastExtensions
|
|
Integer32,
|
|
rlOspfExitOverflowInterval
|
|
PositiveInteger,
|
|
rlOspfDemandExtensions
|
|
TruthValue,
|
|
rlOspfRFC1583Compatibility
|
|
TruthValue,
|
|
rlOspfOpaqueLsaSupport
|
|
TruthValue,
|
|
rlOspfReferenceBandwidth
|
|
Unsigned32,
|
|
rlOspfRestartSupport
|
|
INTEGER,
|
|
rlOspfRestartInterval
|
|
Integer32,
|
|
rlOspfRestartStrictLsaChecking
|
|
TruthValue,
|
|
rlOspfRestartStatus
|
|
INTEGER,
|
|
rlOspfRestartAge
|
|
Unsigned32,
|
|
rlOspfRestartExitReason
|
|
INTEGER,
|
|
rlOspfAsLsaCount
|
|
Gauge32,
|
|
rlOspfAsLsaCksumSum
|
|
Unsigned32,
|
|
rlOspfStubRouterSupport
|
|
TruthValue,
|
|
rlOspfStubRouterAdvertisement
|
|
INTEGER,
|
|
rlOspfDiscontinuityTime
|
|
TimeStamp,
|
|
rlOspfGeneralGroupStatus
|
|
RowStatus,
|
|
rlOspfLogAdjacencyChanges
|
|
INTEGER,
|
|
rlOspfPassiveInterface
|
|
TruthValue,
|
|
rlOspfDefaultMetric
|
|
Unsigned32,
|
|
rlOspfMaximumRedistPrefixNum
|
|
Integer32,
|
|
rlOspfMaximumRedistPrefixThreshold
|
|
Integer32,
|
|
rlOspfMaximumRedistPrefixWarningOnly
|
|
TruthValue,
|
|
rlOspfOperStatus
|
|
INTEGER,
|
|
rlOspfNextRouterId
|
|
RouterID,
|
|
rlOspfRouterIdType
|
|
RlOspfRouterIdType,
|
|
rlOspfNextRouterIdType
|
|
RlOspfRouterIdType,
|
|
rlOspfASBdrRtrActualStatus
|
|
TruthValue,
|
|
rlOspfCalcMaxDelay
|
|
Unsigned32,
|
|
rlOspfRteMaxEqCostPaths
|
|
Unsigned32,
|
|
rlOspfPrefixSuppression
|
|
TruthValue
|
|
}
|
|
|
|
rlOspfProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfGeneralGroupEntry 1 }
|
|
|
|
rlOspfRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
router in the Autonomous System.
|
|
By convention, to ensure uniqueness, this
|
|
should default to the value of one of the
|
|
router's IP interface addresses.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile storage."
|
|
REFERENCE
|
|
"OSPF Version 2, C.1 Global parameters"
|
|
::= { rlOspfGeneralGroupEntry 2 }
|
|
|
|
rlOspfAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of OSPF in the
|
|
router. The value 'enabled' denotes that the
|
|
OSPF Process is active on at least one interface;
|
|
'disabled' disables it on all interfaces.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile storage."
|
|
::= { rlOspfGeneralGroupEntry 3 }
|
|
|
|
rlOspfVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER { version2 (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current version number of the OSPF protocol is 2."
|
|
REFERENCE
|
|
"OSPF Version 2, Title"
|
|
::= { rlOspfGeneralGroupEntry 4 }
|
|
|
|
rlOspfAreaBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is an Area
|
|
Border Router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3 Splitting the AS into
|
|
Areas"
|
|
::= { rlOspfGeneralGroupEntry 5 }
|
|
|
|
rlOspfASBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is configured as
|
|
an Autonomous System Border Router.
|
|
|
|
This object is persistent and when written the
|
|
entity SHOULD save the change to non-volatile storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3.3 Classification of
|
|
routers"
|
|
::= { rlOspfGeneralGroupEntry 6 }
|
|
|
|
rlOspfExternLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of external (LS type-5) link state
|
|
advertisements in the link state database."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.5 AS external link
|
|
advertisements"
|
|
::= { rlOspfGeneralGroupEntry 7 }
|
|
|
|
rlOspfExternLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit sum of the LS checksums of
|
|
the external link state advertisements
|
|
contained in the link state database. This sum
|
|
can be used to determine if there has been a
|
|
change in a router's link state database and
|
|
to compare the link state database of two
|
|
routers. The value should be treated as unsigned
|
|
when comparing two sums of checksums."
|
|
::= { rlOspfGeneralGroupEntry 8 }
|
|
|
|
rlOspfTOSSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for type-of-service routing.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix F.1.2 Optional TOS
|
|
support"
|
|
::= { rlOspfGeneralGroupEntry 9 }
|
|
|
|
rlOspfOriginateNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of new link state advertisements
|
|
that have been originated. This number is
|
|
incremented each time the router originates a new
|
|
LSA.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management system,
|
|
and at other times as indicated by the value of
|
|
ospfDiscontinuityTime."
|
|
::= { rlOspfGeneralGroupEntry 10 }
|
|
|
|
rlOspfRxNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of link state advertisements received
|
|
that are determined to be new instantiations.
|
|
This number does not include newer instantiations
|
|
of self-originated link state advertisements.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management system,
|
|
and at other times as indicated by the value of
|
|
ospfDiscontinuityTime."
|
|
::= { rlOspfGeneralGroupEntry 11 }
|
|
|
|
rlOspfExtLsdbLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..'7FFFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of non-default
|
|
AS-external LSAs entries that can be stored in the
|
|
link state database. If the value is -1, then
|
|
there is no limit.
|
|
|
|
When the number of non-default AS-external LSAs
|
|
in a router's link state database reaches
|
|
rlOspfExtLsdbLimit, the router enters
|
|
overflow state. The router never holds more than
|
|
rlOspfExtLsdbLimit non-default AS-external LSAs
|
|
in its database. OspfExtLsdbLimit MUST be set
|
|
identically in all routers attached to the OSPF
|
|
backbone and/or any regular OSPF area (i.e.,
|
|
OSPF stub areas and NSSAs are excluded).
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL { -1 }
|
|
::= { rlOspfGeneralGroupEntry 12 }
|
|
|
|
rlOspfMulticastExtensions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask indicating whether the router is
|
|
forwarding IP multicast (Class D) datagrams
|
|
based on the algorithms defined in the
|
|
multicast extensions to OSPF.
|
|
|
|
Bit 0, if set, indicates that the router can
|
|
forward IP multicast datagrams in the router's
|
|
directly attached areas (called intra-area
|
|
multicast routing).
|
|
|
|
Bit 1, if set, indicates that the router can
|
|
forward IP multicast datagrams between OSPF
|
|
areas (called inter-area multicast routing).
|
|
|
|
Bit 2, if set, indicates that the router can
|
|
forward IP multicast datagrams between
|
|
Autonomous Systems (called inter-AS multicast
|
|
routing).
|
|
|
|
Only certain combinations of bit settings are
|
|
allowed, namely: 0 (no multicast forwarding is
|
|
enabled), 1 (intra-area multicasting only), 3
|
|
(intra-area and inter-area multicasting), 5
|
|
(intra-area and inter-AS multicasting), and 7
|
|
(multicasting everywhere). By default, no
|
|
multicast forwarding is enabled.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL { 0 }
|
|
::= { rlOspfGeneralGroupEntry 13 }
|
|
|
|
rlOspfExitOverflowInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that, after entering
|
|
OverflowState, a router will attempt to leave
|
|
OverflowState. This allows the router to again
|
|
originate non-default AS-external LSAs. When
|
|
set to 0, the router will not leave
|
|
overflow state until restarted.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL { 0 }
|
|
::= { rlOspfGeneralGroupEntry 14 }
|
|
|
|
rlOspfDemandExtensions OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for demand routing.
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"Extending OSPF to Support Demand Circuits"
|
|
::= { rlOspfGeneralGroupEntry 15 }
|
|
|
|
rlOspfRFC1583Compatibility OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates metrics used to choose among multiple
|
|
AS-external LSAs. When RFC1583Compatibility is set to
|
|
enabled, only cost will be used when choosing among
|
|
multiple AS-external LSAs advertising the same
|
|
destination. When RFC1583Compatibility is set to
|
|
disabled, preference will be driven first by type of
|
|
path using cost only to break ties.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 16.4.1 External path
|
|
preferences"
|
|
::= { rlOspfGeneralGroupEntry 16 }
|
|
|
|
rlOspfOpaqueLsaSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for Opaque LSA types."
|
|
REFERENCE
|
|
"The OSPF Opaque LSA Option"
|
|
::= { rlOspfGeneralGroupEntry 17 }
|
|
|
|
rlOspfReferenceBandwidth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kilobits per second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference bandwidth in kilobits/second for
|
|
calculating default interface metrics. The
|
|
default value is 100,000 KBPS (100 MBPS).
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
::= { rlOspfGeneralGroupEntry 18 }
|
|
|
|
rlOspfRestartSupport OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1),
|
|
plannedOnly (2),
|
|
plannedAndUnplanned (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for OSPF graceful restart.
|
|
Options include: no restart support, only planned
|
|
restarts, or both planned and unplanned restarts.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
::= { rlOspfGeneralGroupEntry 19 }
|
|
|
|
rlOspfRestartInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured OSPF graceful restart timeout interval.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
::= { rlOspfGeneralGroupEntry 20 }
|
|
|
|
rlOspfRestartStrictLsaChecking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if strict LSA checking is enabled for
|
|
graceful restart.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
::= { rlOspfGeneralGroupEntry 21 }
|
|
|
|
|
|
rlOspfRestartStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { notRestarting (1),
|
|
plannedRestart (2),
|
|
unplannedRestart (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current status of OSPF graceful restart."
|
|
::= { rlOspfGeneralGroupEntry 22 }
|
|
|
|
rlOspfRestartAge OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining time in current OSPF graceful restart
|
|
interval."
|
|
::= { rlOspfGeneralGroupEntry 23 }
|
|
|
|
rlOspfRestartExitReason OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1), -- none attempted
|
|
inProgress (2), -- restart in
|
|
-- progress
|
|
completed (3), -- successfully
|
|
-- completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to
|
|
-- topology change.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the outcome of the last attempt at a
|
|
graceful restart. If the value is 'none', no restart
|
|
has yet been attempted. If the value is 'inProgress',
|
|
a restart attempt is currently underway."
|
|
::= { rlOspfGeneralGroupEntry 24 }
|
|
|
|
rlOspfAsLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of AS-scope link state
|
|
advertisements in the AS-scope link state database."
|
|
::= { rlOspfGeneralGroupEntry 25 }
|
|
|
|
rlOspfAsLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the LS checksums of
|
|
the AS link state advertisements contained in the AS-scope
|
|
link state database. This sum can be used to determine
|
|
if there has been a change in a router's AS-scope link
|
|
state database, and to compare the AS-scope link state
|
|
database of two routers."
|
|
::= { rlOspfGeneralGroupEntry 26 }
|
|
|
|
rlOspfStubRouterSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for stub router functionality."
|
|
REFERENCE
|
|
"OSPF Stub Router Advertisement"
|
|
::= { rlOspfGeneralGroupEntry 27 }
|
|
|
|
rlOspfStubRouterAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
doNotAdvertise (1),
|
|
advertise(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the advertisement of
|
|
stub router LSAs by the router. The value
|
|
doNotAdvertise will result in the advertisement
|
|
of a standard router LSA and is the default value.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
::= { rlOspfGeneralGroupEntry 28 }
|
|
|
|
rlOspfDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion
|
|
at which any one of this MIB's counters suffered
|
|
a discontinuity.
|
|
|
|
If no such discontinuities have occurred since the last
|
|
re-initialization of the local management subsystem,
|
|
then this object contains a zero value."
|
|
::= { rlOspfGeneralGroupEntry 29 }
|
|
|
|
rlOspfGeneralGroupStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { rlOspfGeneralGroupEntry 30 }
|
|
|
|
rlOspfLogAdjacencyChanges OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
detail (2),
|
|
disable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the router to send a syslog message when an OSPF
|
|
neighbor goes up or down.
|
|
detail - sends a syslog message for each state change,
|
|
not just when a neighbor goes up or down"
|
|
::= { rlOspfGeneralGroupEntry 31 }
|
|
|
|
rlOspfPassiveInterface OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether to disable sending OSPF routing updates
|
|
on all OSPF IP interfaces."
|
|
::= { rlOspfGeneralGroupEntry 32 }
|
|
|
|
rlOspfDefaultMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A default metric helps solve the problem of redistributing routes
|
|
with incompatible metrics.
|
|
Whenever metrics do not convert, using a default metric provides
|
|
a reasonable substitute and enables the redistribution to proceed."
|
|
DEFVAL { 0 }
|
|
::= { rlOspfGeneralGroupEntry 33 }
|
|
|
|
rlOspfMaximumRedistPrefixNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum number of IP prefixes that can be redistributed into OSPF."
|
|
DEFVAL { 0 }
|
|
::= { rlOspfGeneralGroupEntry 34 }
|
|
|
|
rlOspfMaximumRedistPrefixThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold value, as a percentage, at which a warning message should be generated."
|
|
DEFVAL { 75 }
|
|
::= { rlOspfGeneralGroupEntry 35 }
|
|
|
|
rlOspfMaximumRedistPrefixWarningOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Causes a warning message to be logged when the number of prefixes
|
|
defined by the maximum argumenthas been exceeded.
|
|
Additional redistribution is not prevented."
|
|
DEFVAL { false }
|
|
::= { rlOspfGeneralGroupEntry 36 }
|
|
|
|
rlOspfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- active
|
|
down(2), -- inactive
|
|
goingUp(3), -- activating
|
|
goingDown(4), -- deactivating
|
|
actFailed(5) -- activation failed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the OSPF in the router."
|
|
::= { rlOspfGeneralGroupEntry 37 }
|
|
|
|
rlOspfNextRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
of router in the Autonomous System after restart.
|
|
By convention, to ensure uniqueness, this
|
|
should default to the value of one of the
|
|
router's IP interface addresses."
|
|
::= { rlOspfGeneralGroupEntry 38 }
|
|
|
|
rlOspfRouterIdType OBJECT-TYPE
|
|
SYNTAX RlOspfRouterIdType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of router identifier
|
|
- default value or manually set by user."
|
|
::= { rlOspfGeneralGroupEntry 39 }
|
|
|
|
rlOspfNextRouterIdType OBJECT-TYPE
|
|
SYNTAX RlOspfRouterIdType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of router identifier after restart
|
|
- default value or manually set by user."
|
|
::= { rlOspfGeneralGroupEntry 40 }
|
|
|
|
rlOspfASBdrRtrActualStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is
|
|
an Autonomous System Border Router.
|
|
|
|
Note: rlOspfASBdrRtrStatus field is the configuration
|
|
while this filed is the actual ASBR status"
|
|
::= { rlOspfGeneralGroupEntry 41 }
|
|
|
|
rlOspfCalcMaxDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay before the Routing Table is
|
|
recalculated following a change to the Link State
|
|
Database. (Recalculation is delayed to reduce the
|
|
frequency of recalculations of the Routing Table).
|
|
|
|
This parameter has units of milliseconds. A value of
|
|
0 indicates that a routing calculation will
|
|
immediately follow an update to the database."
|
|
DEFVAL { 5000 }
|
|
::= { rlOspfGeneralGroupEntry 42 }
|
|
|
|
rlOspfRteMaxEqCostPaths OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of equal cost paths that are stored for each
|
|
destination in the Routing Table."
|
|
DEFVAL { 5 }
|
|
::= { rlOspfGeneralGroupEntry 43 }
|
|
|
|
rlOspfPrefixSuppression OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to globally suppress advertisement of all IP prefixes (except for prefixes that
|
|
are associated with loopbacks and passive interfaces) for an entire OSPF process."
|
|
DEFVAL { false }
|
|
::= { rlOspfGeneralGroupEntry 44 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Area Table
|
|
-- The OSPF Area Table contains information
|
|
-- regarding the various areas.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters and
|
|
cumulative statistics of the router's attached areas.
|
|
The interfaces and virtual links are configured
|
|
as part of these areas. Area 0.0.0.0, by definition,
|
|
is the backbone area."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data Structure"
|
|
::= { rlOspf 3 }
|
|
|
|
rlOspfAreaEntry OBJECT-TYPE
|
|
SYNTAX RlOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters and
|
|
cumulative statistics of one of the router's attached areas.
|
|
The interfaces and virtual links are configured as part of
|
|
these areas. Area 0.0.0.0, by definition, is the backbone
|
|
area.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
INDEX { rlOspfAreaProcessId,
|
|
rlOspfAreaId }
|
|
::= { rlOspfAreaTable 1 }
|
|
|
|
RlOspfAreaEntry ::=
|
|
SEQUENCE {
|
|
rlOspfAreaProcessId
|
|
RlOspfProcessID,
|
|
rlOspfAreaId
|
|
AreaID,
|
|
rlOspfImportAsExtern
|
|
INTEGER,
|
|
rlOspfSpfRuns
|
|
Counter32,
|
|
rlOspfAreaBdrRtrCount
|
|
Gauge32,
|
|
rlOspfAsBdrRtrCount
|
|
Gauge32,
|
|
rlOspfAreaLsaCount
|
|
Gauge32,
|
|
rlOspfAreaLsaCksumSum
|
|
Integer32,
|
|
rlOspfAreaSummary
|
|
INTEGER,
|
|
rlOspfAreaStatus
|
|
RowStatus,
|
|
rlOspfAreaNssaTranslatorRole
|
|
INTEGER,
|
|
rlOspfAreaNssaTranslatorState
|
|
INTEGER,
|
|
rlOspfAreaNssaTranslatorStabilityInterval
|
|
PositiveInteger,
|
|
rlOspfAreaNssaTranslatorEvents
|
|
Counter32,
|
|
rlOspfAuthType
|
|
RlOspfAdminAuthenticationType,
|
|
rlOspfAreaAdminStat
|
|
Status,
|
|
rlOspfAreaOperStatus
|
|
INTEGER,
|
|
rlOspfAreaFilterPrefixListIn
|
|
DisplayString,
|
|
rlOspfAreaFilterPrefixListOut
|
|
DisplayString
|
|
}
|
|
|
|
rlOspfAreaProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfAreaEntry 1 }
|
|
|
|
rlOspfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally
|
|
-- an SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an area.
|
|
Area ID 0.0.0.0 is used for the OSPF backbone."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaEntry 2 }
|
|
|
|
rlOspfImportAsExtern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
importExternal (1),
|
|
importNoExternal (2),
|
|
importNssa (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if an area is a stub area, NSSA, or standard
|
|
area. Type-5 AS-external LSAs and type-11 Opaque LSAs are
|
|
not imported into stub areas or NSSAs. NSSAs import
|
|
AS-external data as type-7 LSAs"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
DEFVAL { importExternal }
|
|
::= { rlOspfAreaEntry 3 }
|
|
|
|
rlOspfSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the intra-area route
|
|
table has been calculated using this area's
|
|
link state database. This is typically done
|
|
using Dijkstra's algorithm.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at other
|
|
times as indicated by the value of ospfDiscontinuityTime."
|
|
::= { rlOspfAreaEntry 4 }
|
|
|
|
rlOspfAreaBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Area Border Routers reachable
|
|
within this area. This is initially zero and is
|
|
calculated in each Shortest Path First (SPF) pass."
|
|
::= { rlOspfAreaEntry 5 }
|
|
|
|
rlOspfAsBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Autonomous System Border
|
|
Routers reachable within this area. This is
|
|
initially zero and is calculated in each SPF
|
|
pass."
|
|
::= { rlOspfAreaEntry 6 }
|
|
|
|
rlOspfAreaLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link state advertisements
|
|
in this area's link state database, excluding
|
|
AS-external LSAs."
|
|
::= { rlOspfAreaEntry 7 }
|
|
|
|
rlOspfAreaLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit sum of the link state
|
|
advertisements' LS checksums contained in this
|
|
area's link state database. This sum excludes
|
|
external (LS type-5) link state advertisements.
|
|
The sum can be used to determine if there has
|
|
been a change in a router's link state
|
|
database, and to compare the link state database of
|
|
two routers. The value should be treated as unsigned
|
|
when comparing two sums of checksums."
|
|
DEFVAL { 0 }
|
|
::= { rlOspfAreaEntry 8 }
|
|
|
|
rlOspfAreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAreaSummary (1),
|
|
sendAreaSummary (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable ospfAreaSummary controls the
|
|
import of summary LSAs into stub and NSSA areas.
|
|
It has no effect on other areas.
|
|
|
|
If it is noAreaSummary, the router will not
|
|
originate summary LSAs into the stub or NSSA area.
|
|
It will rely entirely on its default route.
|
|
|
|
If it is sendAreaSummary, the router will both
|
|
summarize and propagate summary LSAs."
|
|
DEFVAL { noAreaSummary }
|
|
::= { rlOspfAreaEntry 9 }
|
|
|
|
rlOspfAreaStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfAreaEntry 10 }
|
|
|
|
rlOspfAreaNssaTranslatorRole OBJECT-TYPE
|
|
SYNTAX INTEGER { always (1), candidate (2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates an NSSA border router's ability to
|
|
perform NSSA translation of type-7 LSAs into
|
|
type-5 LSAs."
|
|
DEFVAL { candidate }
|
|
::= { rlOspfAreaEntry 11 }
|
|
|
|
rlOspfAreaNssaTranslatorState OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1),
|
|
elected (2),
|
|
disabled (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if and how an NSSA border router is
|
|
performing NSSA translation of type-7 LSAs into type-5
|
|
LSAs. When this object is set to enabled, the NSSA Border
|
|
router's OspfAreaNssaExtTranslatorRole has been set to
|
|
always. When this object is set to elected, a candidate
|
|
NSSA Border router is Translating type-7 LSAs into type-5.
|
|
When this object is set to disabled, a candidate NSSA
|
|
border router is NOT translating type-7 LSAs into type-5."
|
|
::= { rlOspfAreaEntry 12 }
|
|
|
|
rlOspfAreaNssaTranslatorStabilityInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds after an elected translator
|
|
determines its services are no longer required, that
|
|
it should continue to perform its translation duties."
|
|
DEFVAL { 40 }
|
|
::= { rlOspfAreaEntry 13 }
|
|
|
|
rlOspfAreaNssaTranslatorEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of translator state changes
|
|
that have occurred since the last boot-up.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at other
|
|
times as indicated by the value of ospfDiscontinuityTime."
|
|
::= { rlOspfAreaEntry 14 }
|
|
|
|
rlOspfAuthType OBJECT-TYPE
|
|
SYNTAX RlOspfAdminAuthenticationType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix D Authentication"
|
|
DEFVAL { none } -- no authentication, by default
|
|
::= { rlOspfAreaEntry 15 }
|
|
|
|
rlOspfAreaAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Area's administrative status.
|
|
The value formed on the area, and the in-
|
|
terfaces associated with the area.
|
|
The value 'disabled' denotes
|
|
that the area is external to OSPF."
|
|
DEFVAL { enabled }
|
|
::= { rlOspfAreaEntry 16 }
|
|
|
|
rlOspfAreaOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- active
|
|
down(2), -- inactive
|
|
goingUp(3), -- activating
|
|
goingDown(4), -- deactivating
|
|
actFailed(5) -- activation failed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the OSPF Area."
|
|
::= { rlOspfAreaEntry 17 }
|
|
|
|
rlOspfAreaFilterPrefixListIn OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix list is applied to prefixes advertised to the specified area from other areas."
|
|
DEFVAL {""}
|
|
::= { rlOspfAreaEntry 18 }
|
|
|
|
rlOspfAreaFilterPrefixListOut OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix list is applied to prefixes advertised out of the specified area to other areas."
|
|
DEFVAL {""}
|
|
::= { rlOspfAreaEntry 19 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Area Default Metric Table
|
|
|
|
-- The OSPF Area Default Metric Table describes the metrics
|
|
-- that a default Area Border Router will advertise into a
|
|
-- Stub area.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfStubAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfStubAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of metrics that will be advertised
|
|
by a default Area Border Router into a stub area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2, Area Parameters"
|
|
::= { rlOspf 4 }
|
|
|
|
rlOspfStubAreaEntry OBJECT-TYPE
|
|
SYNTAX RlOspfStubAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric for a given Type of Service that
|
|
will be advertised by a default Area Border
|
|
Router into a stub area.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2, Area Parameters"
|
|
INDEX { rlOspfStubProcessId,
|
|
rlOspfStubAreaId, rlOspfStubTOS }
|
|
::= { rlOspfStubAreaTable 1 }
|
|
|
|
RlOspfStubAreaEntry ::=
|
|
SEQUENCE {
|
|
rlOspfStubProcessId
|
|
RlOspfProcessID,
|
|
rlOspfStubAreaId
|
|
AreaID,
|
|
rlOspfStubTOS
|
|
TOSType,
|
|
rlOspfStubMetric
|
|
BigMetric,
|
|
rlOspfStubStatus
|
|
RowStatus,
|
|
rlOspfStubMetricType
|
|
INTEGER
|
|
}
|
|
|
|
rlOspfStubProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfStubAreaEntry 1 }
|
|
|
|
rlOspfStubAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit identifier for the stub area. On
|
|
creation, this can be derived from the
|
|
instance."
|
|
::= { rlOspfStubAreaEntry 2 }
|
|
|
|
rlOspfStubTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of Service associated with the
|
|
metric. On creation, this can be derived from
|
|
the instance."
|
|
::= { rlOspfStubAreaEntry 3 }
|
|
|
|
rlOspfStubMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value applied at the indicated Type
|
|
of Service. By default, this equals the least
|
|
metric at the Type of Service among the
|
|
interfaces to other areas."
|
|
::= { rlOspfStubAreaEntry 4 }
|
|
|
|
rlOspfStubStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfStubAreaEntry 5 }
|
|
|
|
rlOspfStubMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ospfMetric (1), -- OSPF Metric
|
|
comparableCost (2), -- external type 1
|
|
nonComparable (3) -- external type 2
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the type of metric
|
|
advertised as a default route."
|
|
DEFVAL { ospfMetric }
|
|
::= { rlOspfStubAreaEntry 6 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Link State Database
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's link state database (LSDB).
|
|
The LSDB contains the link state advertisements
|
|
from throughout the areas that the device is attached to."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Advertisements"
|
|
::= { rlOspf 5 }
|
|
|
|
rlOspfLsdbEntry OBJECT-TYPE
|
|
SYNTAX RlOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single link state advertisement."
|
|
INDEX { rlOspfLsdbProcessId,
|
|
rlOspfLsdbAreaId, rlOspfLsdbType,
|
|
rlOspfLsdbLsid, rlOspfLsdbRouterId }
|
|
::= { rlOspfLsdbTable 1 }
|
|
|
|
RlOspfLsdbEntry ::=
|
|
SEQUENCE {
|
|
rlOspfLsdbProcessId
|
|
RlOspfProcessID,
|
|
rlOspfLsdbAreaId
|
|
AreaID,
|
|
rlOspfLsdbType
|
|
INTEGER,
|
|
rlOspfLsdbLsid
|
|
IpAddress,
|
|
rlOspfLsdbRouterId
|
|
RouterID,
|
|
rlOspfLsdbSequence
|
|
Integer32,
|
|
rlOspfLsdbAge
|
|
Integer32,
|
|
rlOspfLsdbChecksum
|
|
Integer32,
|
|
rlOspfLsdbAdvertisement
|
|
OCTET STRING
|
|
}
|
|
|
|
rlOspfLsdbProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfLsdbEntry 1 }
|
|
|
|
rlOspfLsdbAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit identifier of the area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfLsdbEntry 2 }
|
|
|
|
rlOspfLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routerLink (1),
|
|
networkLink (2),
|
|
summaryLink (3),
|
|
asSummaryLink (4),
|
|
asExternalLink (5), -- but see ospfAsLsdbTable
|
|
multicastLink (6),
|
|
nssaExternalLink (7),
|
|
areaOpaqueLink (10)
|
|
}
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertisement
|
|
format.
|
|
|
|
Note: External link state advertisements are permitted
|
|
for backward compatibility, but should be displayed
|
|
in the ospfAsLsdbTable rather than here."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { rlOspfLsdbEntry 3 }
|
|
|
|
rlOspfLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfLsdbEntry 4 }
|
|
|
|
rlOspfLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfLsdbEntry 5 }
|
|
|
|
rlOspfLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It starts with the value '80000001'h,
|
|
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
|
|
Thus, a typical sequence number will be very negative.
|
|
It is used to detect old and duplicate Link State
|
|
Advertisements. The space of sequence numbers is linearly
|
|
ordered. The larger the sequence number, the more recent
|
|
the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rlOspfLsdbEntry 6 }
|
|
|
|
rlOspfLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge, except when
|
|
-- doNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state advertisement
|
|
in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfLsdbEntry 7 }
|
|
|
|
rlOspfLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents of
|
|
the advertisement, excepting the age field. The age field
|
|
is excepted so that an advertisement's age can be
|
|
incremented without updating the checksum. The checksum
|
|
used is the same that is used for ISO connectionless
|
|
datagrams; it is commonly referred to as the
|
|
Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfLsdbEntry 8 }
|
|
|
|
rlOspfLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire link state advertisement, including
|
|
its header.
|
|
|
|
Note that for variable length LSAs, SNMP agents
|
|
may not be able to return the largest string size."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Advertisements"
|
|
::= { rlOspfLsdbEntry 9 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Address Range Table
|
|
|
|
-- The Address Range Table acts as an adjunct to the Area
|
|
-- Table; It describes those Address Range Summaries that
|
|
-- are configured to be propagated from an Area to reduce
|
|
-- the amount of information about it which is known beyond
|
|
-- its borders.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfAreaRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfAreaRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Address Range Table acts as an adjunct to the Area
|
|
Table. It describes those Address Range Summaries that
|
|
are configured to be propagated from an Area to reduce
|
|
the amount of information about it that is known beyond
|
|
its borders. It contains a set of IP address ranges
|
|
specified by an IP address/IP network mask pair.
|
|
For example, class B address range of X.X.X.X
|
|
with a network mask of 255.255.0.0 includes all IP
|
|
addresses from X.X.0.0 to X.X.255.255.
|
|
|
|
Note that this table is obsoleted and is replaced
|
|
by the Area Aggregate Table."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspf 6 }
|
|
|
|
rlOspfAreaRangeEntry OBJECT-TYPE
|
|
SYNTAX RlOspfAreaRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A single area address range.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
INDEX { rlOspfAreaRangeProcessId,
|
|
rlOspfAreaRangeAreaId, rlOspfAreaRangeNet }
|
|
::= { rlOspfAreaRangeTable 1 }
|
|
|
|
RlOspfAreaRangeEntry ::=
|
|
SEQUENCE {
|
|
rlOspfAreaRangeProcessId
|
|
RlOspfProcessID,
|
|
rlOspfAreaRangeAreaId
|
|
AreaID,
|
|
rlOspfAreaRangeNet
|
|
IpAddress,
|
|
rlOspfAreaRangeMask
|
|
IpAddress,
|
|
rlOspfAreaRangeStatus
|
|
RowStatus,
|
|
rlOspfAreaRangeEffect
|
|
INTEGER
|
|
}
|
|
|
|
rlOspfAreaRangeProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfAreaRangeEntry 1 }
|
|
|
|
rlOspfAreaRangeAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The area that the address range is to be found
|
|
within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaRangeEntry 2 }
|
|
|
|
rlOspfAreaRangeNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The IP address of the net or subnet indicated
|
|
by the range."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaRangeEntry 3 }
|
|
|
|
rlOspfAreaRangeMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The subnet mask that pertains to the net or
|
|
subnet."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaRangeEntry 4 }
|
|
|
|
rlOspfAreaRangeStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfAreaRangeEntry 5 }
|
|
|
|
rlOspfAreaRangeEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertiseMatching (1),
|
|
doNotAdvertiseMatching (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Subnets subsumed by ranges either trigger the
|
|
advertisement of the indicated summary
|
|
(advertiseMatching) or result in the subnet's not
|
|
being advertised at all outside the area."
|
|
DEFVAL { advertiseMatching }
|
|
::= { rlOspfAreaRangeEntry 6 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Host Table
|
|
|
|
-- The Host/Metric Table indicates what hosts are directly
|
|
-- attached to the Router, and what metrics and types of
|
|
-- service should be advertised for them.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Host/Metric Table indicates what hosts are directly
|
|
attached to the router, what metrics and types
|
|
of service should be advertised for them,
|
|
and what areas they are found within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.7 Host route
|
|
parameters"
|
|
::= { rlOspf 7 }
|
|
|
|
rlOspfHostEntry OBJECT-TYPE
|
|
SYNTAX RlOspfHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A metric to be advertised, for a given type of
|
|
service, when a given host is reachable.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
INDEX { rlOspfHostProcessId,
|
|
rlOspfHostIpAddress, rlOspfHostTOS }
|
|
::= { rlOspfHostTable 1 }
|
|
|
|
RlOspfHostEntry ::=
|
|
SEQUENCE {
|
|
rlOspfHostProcessId
|
|
RlOspfProcessID,
|
|
rlOspfHostIpAddress
|
|
IpAddress,
|
|
rlOspfHostTOS
|
|
TOSType,
|
|
rlOspfHostMetric
|
|
Metric,
|
|
rlOspfHostStatus
|
|
RowStatus,
|
|
rlOspfHostAreaID
|
|
AreaID,
|
|
rlOspfHostCfgAreaID
|
|
AreaID
|
|
}
|
|
|
|
rlOspfHostProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfHostEntry 1 }
|
|
|
|
rlOspfHostIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the host."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.7 Host route parameters"
|
|
::= { rlOspfHostEntry 2 }
|
|
|
|
rlOspfHostTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of Service of the route being configured."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.7 Host route parameters"
|
|
::= { rlOspfHostEntry 3 }
|
|
|
|
rlOspfHostMetric OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric to be advertised."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.7 Host route parameters"
|
|
::= { rlOspfHostEntry 4 }
|
|
|
|
rlOspfHostStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfHostEntry 5 }
|
|
|
|
rlOspfHostAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF area to which the host belongs.
|
|
Deprecated by ospfHostCfgAreaID."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.7 Host parameters"
|
|
::= { rlOspfHostEntry 6 }
|
|
|
|
rlOspfHostCfgAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure the OSPF area to which the host belongs."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.7 Host parameters"
|
|
::= { rlOspfHostEntry 7 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Interface Table
|
|
|
|
-- The OSPF Interface Table augments the ipAddrTable
|
|
-- with OSPF specific information.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the interfaces
|
|
from the viewpoint of OSPF.
|
|
It augments the ipAddrTable with OSPF specific information."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { rlOspf 8 }
|
|
|
|
rlOspfIfEntry OBJECT-TYPE
|
|
SYNTAX RlOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface entry describes one interface
|
|
from the viewpoint of OSPF.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
INDEX { rlOspfIfProcessId,
|
|
rlOspfIfIpAddress, rlOspfAddressLessIf }
|
|
::= { rlOspfIfTable 1 }
|
|
|
|
RlOspfIfEntry ::=
|
|
SEQUENCE {
|
|
rlOspfIfProcessId
|
|
RlOspfProcessID,
|
|
rlOspfIfIpAddress
|
|
IpAddress,
|
|
rlOspfAddressLessIf
|
|
InterfaceIndexOrZero,
|
|
rlOspfIfAreaId
|
|
AreaID,
|
|
rlOspfIfType
|
|
INTEGER,
|
|
rlOspfIfAdminStat
|
|
Status,
|
|
rlOspfIfRtrPriority
|
|
DesignatedRouterPriority,
|
|
rlOspfIfTransitDelay
|
|
RlOspfUpToRefreshIntervalTC,
|
|
rlOspfIfRetransInterval
|
|
RlOspfUpToRefreshIntervalTC,
|
|
rlOspfIfHelloInterval
|
|
HelloRange,
|
|
rlOspfIfRtrDeadInterval
|
|
RlOspfDeadIntervalRangeTC,
|
|
rlOspfIfPollInterval
|
|
PositiveInteger,
|
|
rlOspfIfState
|
|
INTEGER,
|
|
rlOspfIfDesignatedRouter
|
|
IpAddress,
|
|
rlOspfIfBackupDesignatedRouter
|
|
IpAddress,
|
|
rlOspfIfEvents
|
|
Counter32,
|
|
rlOspfIfAuthKey
|
|
OCTET STRING,
|
|
rlOspfIfStatus
|
|
RowStatus,
|
|
rlOspfIfMulticastForwarding
|
|
INTEGER,
|
|
rlOspfIfDemand
|
|
TruthValue,
|
|
rlOspfIfAuthType
|
|
RlOspfAdminAuthenticationType,
|
|
rlOspfIfLsaCount
|
|
Gauge32,
|
|
rlOspfIfLsaCksumSum
|
|
Unsigned32,
|
|
rlOspfIfDesignatedRouterId
|
|
RouterID,
|
|
rlOspfIfBackupDesignatedRouterId
|
|
RouterID,
|
|
rlOspfIfOperStatus
|
|
INTEGER,
|
|
rlOspfIfAuthKeyChain
|
|
OCTET STRING,
|
|
rlOspfIfPassive
|
|
TruthValue,
|
|
rlOspfIfLsaRefreshIntvl
|
|
Integer32,
|
|
rlOspfIfFastHelloMultiplier
|
|
RlOspfFastHelloMultiplierRange,
|
|
rlOspfIfMtuIgnore
|
|
TruthValue,
|
|
rlOspfIfNameLookup
|
|
TruthValue,
|
|
rlOspfIfIfIndex
|
|
Integer32,
|
|
rlOspfIfActualAuthType
|
|
RlOspfAuthenticationType,
|
|
rlOspfIfMd5DigestAuthKeyId
|
|
Integer32,
|
|
rlOspfIfMd5DigestAuthKey
|
|
OCTET STRING,
|
|
rlOspfIfPrefixSuppression
|
|
INTEGER
|
|
}
|
|
|
|
rlOspfIfProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfIfEntry 1 }
|
|
|
|
rlOspfIfIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface."
|
|
::= { rlOspfIfEntry 2 }
|
|
|
|
rlOspfAddressLessIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the purpose of easing the instancing of
|
|
addressed and addressless interfaces; this
|
|
variable takes the value 0 on interfaces with
|
|
IP addresses and the corresponding value of
|
|
ifIndex for interfaces having no IP address."
|
|
::= { rlOspfIfEntry 3 }
|
|
|
|
rlOspfIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area
|
|
to which the interface connects. Area ID
|
|
0.0.0.0 is used for the OSPF backbone."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rlOspfIfEntry 4 }
|
|
|
|
rlOspfIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast (1),
|
|
nbma (2),
|
|
pointToPoint (3),
|
|
pointToMultipoint (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface type.
|
|
By way of a default, this field may be intuited
|
|
from the corresponding value of ifType.
|
|
Broadcast LANs, such as Ethernet and IEEE 802.5,
|
|
take the value 'broadcast', X.25 and similar
|
|
technologies take the value 'nbma', and links
|
|
that are definitively point to point take the
|
|
value 'pointToPoint'."
|
|
::= { rlOspfIfEntry 5 }
|
|
|
|
rlOspfIfAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface's administrative status.
|
|
The value formed on the interface, and the interface
|
|
will be advertised as an internal route to some area.
|
|
The value 'disabled' denotes that the interface is
|
|
external to OSPF."
|
|
DEFVAL { enabled }
|
|
::= { rlOspfIfEntry 6 }
|
|
|
|
rlOspfIfRtrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in
|
|
multi-access networks, this field is used in
|
|
the designated router election algorithm. The
|
|
value 0 signifies that the router is not eligible
|
|
to become the designated router on this particular
|
|
network. In the event of a tie in this value,
|
|
routers will use their Router ID as a tie breaker."
|
|
DEFVAL { 1 }
|
|
::= { rlOspfIfEntry 7 }
|
|
|
|
rlOspfIfTransitDelay OBJECT-TYPE
|
|
SYNTAX RlOspfUpToRefreshIntervalTC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link state update packet over this
|
|
interface. Note that the minimal value SHOULD be
|
|
1 second."
|
|
DEFVAL { 1 }
|
|
::= { rlOspfIfEntry 8 }
|
|
|
|
rlOspfIfRetransInterval OBJECT-TYPE
|
|
SYNTAX RlOspfUpToRefreshIntervalTC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link state advertisement
|
|
retransmissions, for adjacencies belonging to this
|
|
interface. This value is also used when retransmitting
|
|
database description and Link State request packets.
|
|
Note that minimal value SHOULD be 1 second."
|
|
DEFVAL { 5 }
|
|
::= { rlOspfIfEntry 9 }
|
|
|
|
rlOspfIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the Hello packets
|
|
that the router sends on the interface. This value must be
|
|
the same for all routers attached to a common network."
|
|
DEFVAL { 10 }
|
|
::= { rlOspfIfEntry 10 }
|
|
|
|
rlOspfIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX RlOspfDeadIntervalRangeTC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello packets have
|
|
not been seen before its neighbors declare the router down.
|
|
This should be some multiple of the Hello interval. This
|
|
value must be the same for all routers attached to a common
|
|
network."
|
|
DEFVAL { 40 }
|
|
::= { rlOspfIfEntry 11 }
|
|
|
|
rlOspfIfPollInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The larger time interval, in seconds, between the Hello
|
|
packets sent to an inactive non-broadcast multi-access
|
|
neighbor."
|
|
DEFVAL { 120 }
|
|
::= { rlOspfIfEntry 12 }
|
|
|
|
rlOspfIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
loopback (2),
|
|
waiting (3),
|
|
pointToPoint (4),
|
|
designatedRouter (5),
|
|
backupDesignatedRouter (6),
|
|
otherDesignatedRouter (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface State."
|
|
DEFVAL { down }
|
|
::= { rlOspfIfEntry 13 }
|
|
|
|
rlOspfIfDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the designated router."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rlOspfIfEntry 14 }
|
|
|
|
rlOspfIfBackupDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the backup designated
|
|
router."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rlOspfIfEntry 15 }
|
|
|
|
rlOspfIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this OSPF interface has
|
|
changed its state or an error has occurred.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at other
|
|
times as indicated by the value of ospfDiscontinuityTime."
|
|
::= { rlOspfIfEntry 16 }
|
|
|
|
rlOspfIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cleartext password used as an OSPF
|
|
authentication key when simplePassword security
|
|
is enabled. This object does not access any OSPF
|
|
cryptogaphic (e.g., MD5) authentication key under
|
|
any circumstance.
|
|
|
|
If the key length is shorter than 8 octets, the
|
|
agent will left adjust and zero fill to 8 octets.
|
|
|
|
Unauthenticated interfaces need no authentication
|
|
key, and simple password authentication cannot use
|
|
a key of more than 8 octets.
|
|
|
|
Note that the use of simplePassword authentication
|
|
is NOT recommended when there is concern regarding
|
|
attack upon the OSPF system. SimplePassword
|
|
authentication is only sufficient to protect against
|
|
accidental misconfigurations because it re-uses
|
|
cleartext passwords [RFC1704].
|
|
|
|
When read, rlOspfIfAuthKey always returns an octet
|
|
string of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { rlOspfIfEntry 17 }
|
|
|
|
rlOspfIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfIfEntry 18 }
|
|
|
|
rlOspfIfMulticastForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocked (1), -- no multicast forwarding
|
|
multicast (2), -- using multicast address
|
|
unicast (3) -- to each OSPF neighbor
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The way multicasts should be forwarded on this
|
|
interface: not forwarded, forwarded as data
|
|
link multicasts, or forwarded as data link
|
|
unicasts. Data link multicasting is not
|
|
meaningful on point-to-point and NBMA interfaces,
|
|
and setting ospfMulticastForwarding to 0 effectively
|
|
disables all multicast forwarding."
|
|
DEFVAL { blocked }
|
|
::= { rlOspfIfEntry 19 }
|
|
|
|
rlOspfIfDemand OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Demand OSPF procedures (hello
|
|
suppression to FULL neighbors and setting the
|
|
DoNotAge flag on propagated LSAs) should be
|
|
performed on this interface."
|
|
DEFVAL { false }
|
|
::= { rlOspfIfEntry 20 }
|
|
|
|
rlOspfIfAuthType OBJECT-TYPE
|
|
SYNTAX RlOspfAdminAuthenticationType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an interface.
|
|
|
|
Note that this object can be used to engage
|
|
in significant attacks against an OSPF router."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix D Authentication"
|
|
DEFVAL { none } -- no authentication, by default
|
|
::= { rlOspfIfEntry 21 }
|
|
|
|
rlOspfIfLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link-local link state advertisements
|
|
in this interface's link-local link state database."
|
|
::= { rlOspfIfEntry 22 }
|
|
|
|
rlOspfIfLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the Link State
|
|
Advertisements' LS checksums contained in this
|
|
interface's link-local link state database.
|
|
The sum can be used to determine if there has
|
|
been a change in the interface's link state
|
|
database and to compare the interface link state
|
|
database of routers attached to the same subnet."
|
|
::= { rlOspfIfEntry 23 }
|
|
|
|
rlOspfIfDesignatedRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the designated router."
|
|
::= { rlOspfIfEntry 24 }
|
|
|
|
rlOspfIfBackupDesignatedRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the backup designated router."
|
|
::= { rlOspfIfEntry 25 }
|
|
|
|
rlOspfIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- active
|
|
down(2), -- inactive
|
|
goingUp(3), -- activating
|
|
goingDown(4), -- deactivating
|
|
actFailed(5) -- activation failed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the OSPF interface."
|
|
::= { rlOspfIfEntry 26 }
|
|
|
|
rlOspfIfAuthKeyChain OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the authentication key-chain configured
|
|
on this interface. The key-chain is a reference to
|
|
which set of secret keys are to be accessed in order
|
|
to determine which secret key string to use. The key
|
|
chain name is not the secret key string password and
|
|
can also be used in other routing protocols, such
|
|
as RIP and ISIS."
|
|
::= { rlOspfIfEntry 27 }
|
|
|
|
rlOspfIfPassive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether this interface is a passive interface. If set
|
|
to TRUE, we suppress HELLO packets sent on and received from this
|
|
interface. We will therefore advertise this interface in our LSAs
|
|
but not run OSPF protocol over it."
|
|
DEFVAL { false }
|
|
::= { rlOspfIfEntry 28 }
|
|
|
|
rlOspfIfLsaRefreshIntvl OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3599)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Self-originated LSAs are periodically reflooded into the routing
|
|
domain, to add to the robustness of the OSPF protocol. This value
|
|
determines the interval between refreshes of LSAs that are only
|
|
flooded over this interface, for example type-9 opaque LSAs, and
|
|
is defaulted to the OSPF standard default of 1800 seconds
|
|
(30 minutes)."
|
|
DEFVAL { 1800 }
|
|
::= { rlOspfIfEntry 29 }
|
|
|
|
rlOspfIfFastHelloMultiplier OBJECT-TYPE
|
|
SYNTAX RlOspfFastHelloMultiplierRange
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Hellos that should be sent within 1 second when
|
|
using Fast Hellos on this interface. This value does not have
|
|
to be same for all routers attached to a common network, but it
|
|
is advisable. Fast Hellos are configured using
|
|
ospfPmIfRtrDeadInterval."
|
|
DEFVAL { 5 }
|
|
::= { rlOspfIfEntry 30 }
|
|
|
|
rlOspfIfMtuIgnore OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether DC-OSPF checks the MTU size on
|
|
incoming Database Description packets. By default, if the
|
|
received MTU size in a DB Description packet is higher than
|
|
the MTU size configured on the incoming interface, the OSPF
|
|
adjacency will not be established. If the interface is
|
|
tunneled over, say, an MPLS network, then the administrator
|
|
may not know the maximum MTU size and so can tell DC-OSPF to
|
|
ignore the MTU size on incoming DB description packets."
|
|
DEFVAL { false }
|
|
::= { rlOspfIfEntry 31 }
|
|
|
|
rlOspfIfNameLookup OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether to look up Domain Name System (DNS) names
|
|
for use in all OSPF show EXEC command displays."
|
|
::= { rlOspfIfEntry 32 }
|
|
|
|
rlOspfIfIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit index identifying this interface, or zero if no index
|
|
value is known. For interfaces having no IP Address this field
|
|
is automatically set to the value of the address-less interface
|
|
index field."
|
|
::= { rlOspfIfEntry 33 }
|
|
|
|
rlOspfIfActualAuthType OBJECT-TYPE
|
|
SYNTAX RlOspfAuthenticationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual authentication type specified for an interface."
|
|
::= { rlOspfIfEntry 34 }
|
|
|
|
rlOspfIfMd5DigestAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit key-id for this interface for generate MD5 digest
|
|
authentication for the OSPF packets."
|
|
::= { rlOspfIfEntry 35 }
|
|
|
|
rlOspfIfMd5DigestAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key to be used to generate MD5 digest authentication for
|
|
the OSPF packets. This field specifies the authentication string.
|
|
A separate key can be assigned to each subnetwork. All
|
|
neighboring routers on the same subnetwork must have the same key to be able to
|
|
exchange OSPF information. Only 1 key can be configured per interface."
|
|
::= { rlOspfIfEntry 36 }
|
|
|
|
|
|
rlOspfIfPrefixSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
enable (2),
|
|
disable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Prefix generation on the interface is suppressed - for any interface type, including loopbacks and passive interfaces.
|
|
None - behavior according to global config, see rlOspfPrefixSuppression in rlOspfGeneralGroupTable.
|
|
Enable - suppress the interface; the IP interface will be suppressed in case of stub interface type (Loopback or passive),
|
|
or in case the router is the DR for the Transit network
|
|
Disable - don't suppress the IP interface"
|
|
DEFVAL { none }
|
|
::= { rlOspfIfEntry 37 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Interface Metric Table
|
|
|
|
-- The Metric Table describes the metrics to be advertised
|
|
-- for a specified interface at the various types of service.
|
|
-- As such, this table is an adjunct of the OSPF Interface
|
|
-- Table.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfIfMetricTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfIfMetricEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric Table describes the metrics to be advertised
|
|
for a specified interface at the various types of service.
|
|
As such, this table is an adjunct of the OSPF Interface
|
|
Table.
|
|
|
|
Types of service, as defined by RFC 791, have the ability
|
|
to request low delay, high bandwidth, or reliable linkage.
|
|
|
|
For the purposes of this specification, the measure of
|
|
bandwidth:
|
|
|
|
Metric = referenceBandwidth / ifSpeed
|
|
|
|
is the default value.
|
|
The default reference bandwidth is 10^8.
|
|
For multiple link interfaces, note that ifSpeed is the sum
|
|
of the individual link speeds. This yields a number having
|
|
the following typical values:
|
|
|
|
Network Type/bit rate Metric
|
|
|
|
>= 100 MBPS 1
|
|
Ethernet/802.3 10
|
|
E1 48
|
|
T1 (ESF) 65
|
|
64 KBPS 1562
|
|
56 KBPS 1785
|
|
19.2 KBPS 5208
|
|
9.6 KBPS 10416
|
|
|
|
Routes that are not specified use the default
|
|
(TOS 0) metric.
|
|
|
|
Note that the default reference bandwidth can be configured
|
|
using the general group object ospfReferenceBandwidth."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { rlOspf 9 }
|
|
|
|
rlOspfIfMetricEntry OBJECT-TYPE
|
|
SYNTAX RlOspfIfMetricEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A particular TOS metric for a non-virtual interface
|
|
identified by the interface index.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
INDEX { rlOspfIfMetricProcessId,
|
|
rlOspfIfMetricIpAddress,
|
|
rlOspfIfMetricAddressLessIf,
|
|
rlOspfIfMetricTOS }
|
|
::= { rlOspfIfMetricTable 1 }
|
|
|
|
RlOspfIfMetricEntry ::=
|
|
SEQUENCE {
|
|
rlOspfIfMetricProcessId
|
|
RlOspfProcessID,
|
|
rlOspfIfMetricIpAddress
|
|
IpAddress,
|
|
rlOspfIfMetricAddressLessIf
|
|
InterfaceIndexOrZero,
|
|
rlOspfIfMetricTOS
|
|
TOSType,
|
|
rlOspfIfMetricValue
|
|
Metric,
|
|
rlOspfIfMetricStatus
|
|
RowStatus
|
|
}
|
|
|
|
rlOspfIfMetricProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfIfMetricEntry 1 }
|
|
|
|
rlOspfIfMetricIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface. On row
|
|
creation, this can be derived from the instance."
|
|
::= { rlOspfIfMetricEntry 2 }
|
|
|
|
rlOspfIfMetricAddressLessIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the purpose of easing the instancing of
|
|
addressed and addressless interfaces; this
|
|
variable takes the value 0 on interfaces with
|
|
IP addresses and the value of ifIndex for
|
|
interfaces having no IP address. On row
|
|
creation, this can be derived from the instance."
|
|
::= { rlOspfIfMetricEntry 3 }
|
|
|
|
rlOspfIfMetricTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of Service metric being referenced.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { rlOspfIfMetricEntry 4 }
|
|
|
|
rlOspfIfMetricValue OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using this Type of Service on
|
|
this interface. The default value of the TOS 0
|
|
metric is 10^8 / ifSpeed."
|
|
::= { rlOspfIfMetricEntry 5 }
|
|
|
|
rlOspfIfMetricStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfIfMetricEntry 6 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Virtual Interface Table
|
|
|
|
-- The Virtual Interface Table describes the virtual
|
|
-- links that the OSPF Process is configured to
|
|
-- carry on.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfVirtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's virtual interfaces
|
|
that the OSPF Process is configured to carry on."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.4 Virtual link
|
|
parameters"
|
|
::= { rlOspf 10 }
|
|
|
|
rlOspfVirtIfEntry OBJECT-TYPE
|
|
SYNTAX RlOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single virtual interface.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
INDEX { rlOspfVirtIfProcessId,
|
|
rlOspfVirtIfAreaId, rlOspfVirtIfNeighbor }
|
|
::= { rlOspfVirtIfTable 1 }
|
|
|
|
RlOspfVirtIfEntry ::=
|
|
SEQUENCE {
|
|
rlOspfVirtIfProcessId
|
|
RlOspfProcessID,
|
|
rlOspfVirtIfAreaId
|
|
AreaID,
|
|
rlOspfVirtIfNeighbor
|
|
RouterID,
|
|
rlOspfVirtIfTransitDelay
|
|
RlOspfUpToRefreshIntervalTC,
|
|
rlOspfVirtIfRetransInterval
|
|
RlOspfUpToRefreshIntervalTC,
|
|
rlOspfVirtIfHelloInterval
|
|
HelloRange,
|
|
rlOspfVirtIfRtrDeadInterval
|
|
RlOspfDeadIntervalRangeTC,
|
|
rlOspfVirtIfState
|
|
INTEGER,
|
|
rlOspfVirtIfEvents
|
|
Counter32,
|
|
rlOspfVirtIfAuthKey
|
|
OCTET STRING,
|
|
rlOspfVirtIfStatus
|
|
RowStatus,
|
|
rlOspfVirtIfAuthType
|
|
RlOspfAuthenticationType,
|
|
rlOspfVirtIfLsaCount
|
|
Gauge32,
|
|
rlOspfVirtIfLsaCksumSum
|
|
Unsigned32,
|
|
rlOspfVirtIfAuthKeyChain
|
|
OCTET STRING,
|
|
rlOspfVirtIfAdminStatus
|
|
Status,
|
|
rlOspfVirtIfOperStatus
|
|
INTEGER,
|
|
rlOspfVirtIfIndex
|
|
INTEGER,
|
|
rlOspfVirtIfActualAuthType
|
|
RlOspfAuthenticationType,
|
|
rlOspfVirtIfMd5DigestAuthKeyId
|
|
Integer32,
|
|
rlOspfVirtIfMd5DigestAuthKey
|
|
OCTET STRING
|
|
}
|
|
|
|
rlOspfVirtIfProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfVirtIfEntry 1 }
|
|
|
|
rlOspfVirtIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transit area that the virtual link
|
|
traverses. By definition, this is not 0.0.0.0."
|
|
::= { rlOspfVirtIfEntry 2 }
|
|
|
|
rlOspfVirtIfNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the virtual neighbor."
|
|
::= { rlOspfVirtIfEntry 3 }
|
|
|
|
rlOspfVirtIfTransitDelay OBJECT-TYPE
|
|
SYNTAX RlOspfUpToRefreshIntervalTC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a Link State update packet over this
|
|
interface. Note that the minimal value SHOULD be
|
|
1 second."
|
|
DEFVAL { 1 }
|
|
::= { rlOspfVirtIfEntry 4 }
|
|
|
|
rlOspfVirtIfRetransInterval OBJECT-TYPE
|
|
SYNTAX RlOspfUpToRefreshIntervalTC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link state
|
|
avertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database
|
|
description and Link State request packets. This
|
|
value should be well over the expected
|
|
round-trip time. Note that the minimal value SHOULD be
|
|
1 second."
|
|
DEFVAL { 5 }
|
|
::= { rlOspfVirtIfEntry 5 }
|
|
|
|
rlOspfVirtIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the
|
|
interface. This value must be the same for the
|
|
virtual neighbor."
|
|
DEFVAL { 10 }
|
|
::= { rlOspfVirtIfEntry 6 }
|
|
|
|
rlOspfVirtIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX RlOspfDeadIntervalRangeTC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before its
|
|
neighbors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for the virtual neighbor."
|
|
DEFVAL { 60 }
|
|
::= { rlOspfVirtIfEntry 7 }
|
|
|
|
rlOspfVirtIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1), -- these use the same encoding
|
|
pointToPoint (4) -- as the rlOspfIfTable
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF virtual interface states."
|
|
DEFVAL { down }
|
|
::= { rlOspfVirtIfEntry 8 }
|
|
|
|
rlOspfVirtIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of state changes or error events on
|
|
this virtual link.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at other
|
|
times as indicated by the value of ospfDiscontinuityTime."
|
|
::= { rlOspfVirtIfEntry 9 }
|
|
|
|
rlOspfVirtIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cleartext password used as an OSPF
|
|
authentication key when simplePassword security
|
|
is enabled. This object does not access any OSPF
|
|
cryptogaphic (e.g., MD5) authentication key under
|
|
any circumstance.
|
|
If the key length is shorter than 8 octets, the
|
|
agent will left adjust and zero fill to 8 octets.
|
|
|
|
Unauthenticated interfaces need no authentication
|
|
key, and simple password authentication cannot use
|
|
a key of more than 8 octets.
|
|
|
|
Note that the use of simplePassword authentication
|
|
is NOT recommended when there is concern regarding
|
|
attack upon the OSPF system. SimplePassword
|
|
authentication is only sufficient to protect against
|
|
accidental misconfigurations because it re-uses
|
|
cleartext passwords. [RFC1704]
|
|
|
|
When read, rlOspfIfAuthKey always returns an octet
|
|
string of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { rlOspfVirtIfEntry 10 }
|
|
|
|
rlOspfVirtIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfVirtIfEntry 11 }
|
|
|
|
rlOspfVirtIfAuthType OBJECT-TYPE
|
|
SYNTAX RlOspfAuthenticationType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for a virtual interface.
|
|
|
|
Note that this object can be used to engage
|
|
in significant attacks against an OSPF router."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { none } -- no authentication, by default
|
|
::= { rlOspfVirtIfEntry 12 }
|
|
|
|
rlOspfVirtIfLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link-local link state advertisements
|
|
in this virtual interface's link-local link state database."
|
|
::= { rlOspfVirtIfEntry 13 }
|
|
|
|
rlOspfVirtIfLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the link state
|
|
advertisements' LS checksums contained in this
|
|
virtual interface's link-local link state database.
|
|
The sum can be used to determine if there has
|
|
been a change in the virtual interface's link state
|
|
database, and to compare the virtual interface
|
|
link state database of the virtual neighbors."
|
|
::= { rlOspfVirtIfEntry 14 }
|
|
|
|
rlOspfVirtIfAuthKeyChain OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the authentication key-chain configured
|
|
on this interface. The key-chain is a reference to
|
|
which set of secret keys are to be accessed in order
|
|
to determine which secret key string to use. The key
|
|
chain name is not the secret key string password and
|
|
can also be used in other routing protocols, such
|
|
as RIP and ISIS."
|
|
::= { rlOspfVirtIfEntry 15 }
|
|
|
|
rlOspfVirtIfAdminStatus OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired administrative state of this virtual interface."
|
|
DEFVAL { enabled }
|
|
::= { rlOspfVirtIfEntry 16 }
|
|
|
|
rlOspfVirtIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- active
|
|
down(2), -- inactive
|
|
goingUp(3), -- activating
|
|
goingDown(4), -- deactivating
|
|
actFailed(5) -- activation failed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of this virtual interface."
|
|
::= { rlOspfVirtIfEntry 17 }
|
|
|
|
rlOspfVirtIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local index assigned by the
|
|
OSPF Process to this OSPF virtual interface."
|
|
::= { rlOspfVirtIfEntry 18 }
|
|
|
|
rlOspfVirtIfActualAuthType OBJECT-TYPE
|
|
SYNTAX RlOspfAuthenticationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual authentication type specified for a virtual interface."
|
|
::= { rlOspfVirtIfEntry 19 }
|
|
|
|
rlOspfVirtIfMd5DigestAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit key-id for this interface for generate MD5 digest
|
|
authentication for the OSPF packets."
|
|
::= { rlOspfVirtIfEntry 20 }
|
|
|
|
rlOspfVirtIfMd5DigestAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key to be used to generate MD5 digest authentication for
|
|
the OSPF packets. This field specifies the authentication string.
|
|
A separate key can be assigned to each subnetwork. All
|
|
neighboring routers on the same subnetwork must have the same key to be able to
|
|
exchange OSPF information. Only 1 key can be configured per interface."
|
|
::= { rlOspfVirtIfEntry 21 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Neighbor Table
|
|
|
|
-- The OSPF Neighbor Table describes all neighbors in
|
|
-- the locality of the subject router.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing all non-virtual neighbors
|
|
in the locality of the OSPF router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
::= { rlOspf 11 }
|
|
|
|
rlOspfNbrEntry OBJECT-TYPE
|
|
SYNTAX RlOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single neighbor.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
INDEX { rlOspfNbrProcessId,
|
|
rlOspfNbrIpAddr, rlOspfNbrAddressLessIndex }
|
|
::= { rlOspfNbrTable 1 }
|
|
|
|
RlOspfNbrEntry ::=
|
|
SEQUENCE {
|
|
rlOspfNbrProcessId
|
|
RlOspfProcessID,
|
|
rlOspfNbrIpAddr
|
|
IpAddress,
|
|
rlOspfNbrAddressLessIndex
|
|
InterfaceIndexOrZero,
|
|
rlOspfNbrRtrId
|
|
RouterID,
|
|
rlOspfNbrOptions
|
|
Integer32,
|
|
rlOspfNbrPriority
|
|
DesignatedRouterPriority,
|
|
rlOspfNbrState
|
|
INTEGER,
|
|
rlOspfNbrEvents
|
|
Counter32,
|
|
rlOspfNbrLsRetransQLen
|
|
Gauge32,
|
|
rlOspfNbmaNbrStatus
|
|
RowStatus,
|
|
rlOspfNbmaNbrPermanence
|
|
INTEGER,
|
|
rlOspfNbrHelloSuppressed
|
|
TruthValue,
|
|
rlOspfNbrRestartHelperStatus
|
|
INTEGER,
|
|
rlOspfNbrRestartHelperAge
|
|
Unsigned32,
|
|
rlOspfNbrRestartHelperExitReason
|
|
INTEGER,
|
|
rlOspfNbrDeadTime
|
|
PositiveInteger,
|
|
rlOspfNbrAreaId
|
|
AreaID,
|
|
rlOspfNbrIfIndex
|
|
INTEGER,
|
|
rlOspfNbrIfIpAddr
|
|
IpAddress
|
|
}
|
|
|
|
rlOspfNbrProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfNbrEntry 1 }
|
|
|
|
rlOspfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this neighbor is using in its
|
|
IP source address. Note that, on addressless
|
|
links, this will not be 0.0.0.0 but the
|
|
address of another of the neighbor's interfaces."
|
|
::= { rlOspfNbrEntry 2 }
|
|
|
|
rlOspfNbrAddressLessIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On an interface having an IP address, zero.
|
|
On addressless interfaces, the corresponding
|
|
value of ifIndex in the Internet Standard MIB.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { rlOspfNbrEntry 3 }
|
|
|
|
rlOspfNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type
|
|
IpAddress) uniquely identifying the neighboring
|
|
router in the Autonomous System."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rlOspfNbrEntry 4 }
|
|
|
|
rlOspfNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask corresponding to the neighbor's
|
|
options field.
|
|
|
|
Bit 0, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 1, if set, indicates that the associated
|
|
area accepts and operates on external
|
|
information; if zero, it is a stub area.
|
|
|
|
Bit 2, if set, indicates that the system is
|
|
capable of routing IP multicast datagrams, that is
|
|
that it implements the multicast extensions to
|
|
OSPF.
|
|
|
|
Bit 3, if set, indicates that the associated
|
|
area is an NSSA. These areas are capable of
|
|
carrying type-7 external advertisements, which
|
|
are translated into type-5 external advertisements
|
|
at NSSA borders."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.2 Options"
|
|
DEFVAL { 0 }
|
|
::= { rlOspfNbrEntry 5 }
|
|
|
|
rlOspfNbrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designated
|
|
router election algorithm. The value 0 signifies
|
|
that the neighbor is not eligible to become
|
|
the designated router on this particular network."
|
|
|
|
DEFVAL { 1 }
|
|
::= { rlOspfNbrEntry 6 }
|
|
|
|
rlOspfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the relationship with this neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
DEFVAL { down }
|
|
::= { rlOspfNbrEntry 7 }
|
|
|
|
rlOspfNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this neighbor relationship
|
|
has changed state or an error has occurred.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at other
|
|
times as indicated by the value of ospfDiscontinuityTime."
|
|
::= { rlOspfNbrEntry 8 }
|
|
|
|
rlOspfNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { rlOspfNbrEntry 9 }
|
|
|
|
rlOspfNbmaNbrStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfNbrEntry 10 }
|
|
|
|
rlOspfNbmaNbrPermanence OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic (1), -- learned through protocol
|
|
permanent (2) -- configured address
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the entry;
|
|
'dynamic' and 'permanent' refer to how the neighbor
|
|
became known."
|
|
DEFVAL { permanent }
|
|
::= { rlOspfNbrEntry 11 }
|
|
|
|
rlOspfNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor."
|
|
::= { rlOspfNbrEntry 12 }
|
|
|
|
rlOspfNbrRestartHelperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { notHelping (1),
|
|
helping (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the router is acting
|
|
as a graceful restart helper for the neighbor."
|
|
::= { rlOspfNbrEntry 13 }
|
|
|
|
rlOspfNbrRestartHelperAge OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining time in current OSPF graceful restart
|
|
interval, if the router is acting as a restart
|
|
helper for the neighbor."
|
|
::= { rlOspfNbrEntry 14 }
|
|
|
|
rlOspfNbrRestartHelperExitReason OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1), -- not attempted
|
|
inProgress (2), -- restart in
|
|
-- progress
|
|
completed (3), -- successfully
|
|
-- completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to
|
|
-- topology
|
|
-- change.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the outcome of the last attempt at acting
|
|
as a graceful restart helper for the neighbor."
|
|
::= { rlOspfNbrEntry 15 }
|
|
|
|
rlOspfNbrDeadTime OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining in seconds within which we need to receive a
|
|
hello packet from the neighbor or we declare the adjacency down.
|
|
If fast hellos area in use, this value is always set to 1.
|
|
If the oper_status is down or ospfPmNbrState is DOWN, then the value
|
|
is set to zero and the field is not valid."
|
|
::= { rlOspfNbrEntry 16 }
|
|
|
|
rlOspfNbrAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area to which the neighbor belongs. If the oper_status is
|
|
down, then this value is set to zero and the field is not valid."
|
|
::= { rlOspfNbrEntry 17 }
|
|
|
|
rlOspfNbrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index to whitch the neighbor is connected."
|
|
::= { rlOspfNbrEntry 18 }
|
|
|
|
rlOspfNbrIfIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface IP address to whitch the neighbor is connected."
|
|
::= { rlOspfNbrEntry 19 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Virtual Neighbor Table
|
|
|
|
-- This table describes all virtual neighbors.
|
|
-- Since Virtual Links are configured in the
|
|
-- virtual interface table, this table is read-only.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfVirtNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes all virtual neighbors.
|
|
Since virtual links are configured
|
|
in the Virtual Interface Table, this table is read-only."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 15 Virtual Links"
|
|
::= { rlOspf 12 }
|
|
|
|
rlOspfVirtNbrEntry OBJECT-TYPE
|
|
SYNTAX RlOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual neighbor information."
|
|
INDEX { rlOspfVirtNbrProcessId,
|
|
rlOspfVirtNbrArea, rlOspfVirtNbrRtrId }
|
|
::= { rlOspfVirtNbrTable 1 }
|
|
|
|
RlOspfVirtNbrEntry ::=
|
|
SEQUENCE {
|
|
rlOspfVirtNbrProcessId
|
|
RlOspfProcessID,
|
|
rlOspfVirtNbrArea
|
|
AreaID,
|
|
rlOspfVirtNbrRtrId
|
|
RouterID,
|
|
rlOspfVirtNbrIpAddr
|
|
IpAddress,
|
|
rlOspfVirtNbrOptions
|
|
Integer32,
|
|
rlOspfVirtNbrState
|
|
INTEGER,
|
|
rlOspfVirtNbrEvents
|
|
Counter32,
|
|
rlOspfVirtNbrLsRetransQLen
|
|
Gauge32,
|
|
rlOspfVirtNbrHelloSuppressed
|
|
TruthValue,
|
|
rlOspfVirtNbrRestartHelperStatus
|
|
INTEGER,
|
|
rlOspfVirtNbrRestartHelperAge
|
|
Unsigned32,
|
|
rlOspfVirtNbrRestartHelperExitReason
|
|
INTEGER,
|
|
rlOspfVirtNbrDeadTime
|
|
PositiveInteger
|
|
}
|
|
|
|
rlOspfVirtNbrProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfVirtNbrEntry 1 }
|
|
|
|
rlOspfVirtNbrArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area Identifier."
|
|
::= { rlOspfVirtNbrEntry 2 }
|
|
|
|
rlOspfVirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
neighboring router in the Autonomous System."
|
|
::= { rlOspfVirtNbrEntry 3 }
|
|
|
|
rlOspfVirtNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this virtual neighbor is using."
|
|
::= { rlOspfVirtNbrEntry 4 }
|
|
|
|
rlOspfVirtNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask corresponding to the neighbor's
|
|
options field.
|
|
|
|
Bit 1, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 2, if set, indicates that the system is
|
|
network multicast capable, i.e., that it
|
|
implements OSPF multicast routing."
|
|
::= { rlOspfVirtNbrEntry 5 }
|
|
|
|
rlOspfVirtNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the virtual neighbor relationship."
|
|
::= { rlOspfVirtNbrEntry 6 }
|
|
|
|
rlOspfVirtNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this virtual link has
|
|
changed its state or an error has occurred.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at other
|
|
times as indicated by the value of ospfDiscontinuityTime."
|
|
::= { rlOspfVirtNbrEntry 7 }
|
|
|
|
rlOspfVirtNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { rlOspfVirtNbrEntry 8 }
|
|
|
|
rlOspfVirtNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor."
|
|
::= { rlOspfVirtNbrEntry 9 }
|
|
|
|
rlOspfVirtNbrRestartHelperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { notHelping (1),
|
|
helping (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the router is acting
|
|
as a graceful restart helper for the neighbor."
|
|
::= { rlOspfVirtNbrEntry 10 }
|
|
|
|
rlOspfVirtNbrRestartHelperAge OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining time in current OSPF graceful restart
|
|
interval, if the router is acting as a restart
|
|
helper for the neighbor."
|
|
::= { rlOspfVirtNbrEntry 11 }
|
|
|
|
rlOspfVirtNbrRestartHelperExitReason OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1), -- not attempted
|
|
inProgress (2), -- restart in
|
|
-- progress
|
|
completed (3), -- successfully
|
|
-- completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to
|
|
-- topology
|
|
-- change.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the outcome of the last attempt at acting
|
|
as a graceful restart helper for the neighbor."
|
|
::= { rlOspfVirtNbrEntry 12 }
|
|
|
|
rlOspfVirtNbrDeadTime OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining in seconds within which we need to receive a
|
|
hello packet from the neighbor or we declare the adjacency down.
|
|
If fast hellos area in use, this value is always set to 1.
|
|
If the oper_status is down or ospfPmVirtNbrState is DOWN, then the value
|
|
is set to zero and the field is not valid."
|
|
::= { rlOspfVirtNbrEntry 13 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Link State Database, External
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
-- This table is identical to the OSPF LSDB Table in
|
|
-- format, but contains only External Link State
|
|
-- Advertisements. The purpose is to allow external
|
|
-- LSAs to be displayed once for the router rather
|
|
-- than once in each non-stub area.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfExtLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Process's external LSA link state database.
|
|
|
|
This table is identical to the OSPF LSDB Table
|
|
in format, but contains only external link state
|
|
advertisements. The purpose is to allow external
|
|
|
|
|
|
|
|
LSAs to be displayed once for the router rather
|
|
than once in each non-stub area.
|
|
|
|
Note that external LSAs are also in the AS-scope link state
|
|
database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Advertisements"
|
|
::= { rlOspf 13 }
|
|
|
|
rlOspfExtLsdbEntry OBJECT-TYPE
|
|
SYNTAX RlOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A single link state advertisement."
|
|
INDEX { rlOspfExtLsdbProcessId,
|
|
rlOspfExtLsdbType, rlOspfExtLsdbLsid, rlOspfExtLsdbRouterId }
|
|
::= { rlOspfExtLsdbTable 1 }
|
|
|
|
RlOspfExtLsdbEntry ::=
|
|
SEQUENCE {
|
|
rlOspfExtLsdbProcessId
|
|
RlOspfProcessID,
|
|
rlOspfExtLsdbType
|
|
INTEGER,
|
|
rlOspfExtLsdbLsid
|
|
IpAddress,
|
|
rlOspfExtLsdbRouterId
|
|
RouterID,
|
|
rlOspfExtLsdbSequence
|
|
Integer32,
|
|
rlOspfExtLsdbAge
|
|
Integer32,
|
|
rlOspfExtLsdbChecksum
|
|
Integer32,
|
|
rlOspfExtLsdbAdvertisement
|
|
OCTET STRING
|
|
}
|
|
|
|
rlOspfExtLsdbProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfExtLsdbEntry 1 }
|
|
|
|
rlOspfExtLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asExternalLink (5)
|
|
}
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertisement
|
|
format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
|
|
::= { rlOspfExtLsdbEntry 2 }
|
|
|
|
rlOspfExtLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfExtLsdbEntry 3 }
|
|
|
|
rlOspfExtLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32-bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfExtLsdbEntry 4 }
|
|
|
|
rlOspfExtLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It starts with the value '80000001'h,
|
|
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
|
|
Thus, a typical sequence number will be very negative.
|
|
It is used to detect old and duplicate link state
|
|
advertisements. The space of sequence numbers is linearly
|
|
ordered. The larger the sequence number, the more recent
|
|
the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rlOspfExtLsdbEntry 5 }
|
|
|
|
rlOspfExtLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge, except when
|
|
-- doNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfExtLsdbEntry 6 }
|
|
|
|
rlOspfExtLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfExtLsdbEntry 7 }
|
|
|
|
rlOspfExtLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(36))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The entire link state advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State
|
|
Advertisements"
|
|
::= { rlOspfExtLsdbEntry 8 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- The OSPF Area Aggregate Table
|
|
--
|
|
-- This table replaces the OSPF Area Summary Table, being an
|
|
-- extension of that for CIDR routers.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfAreaAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area Aggregate Table acts as an adjunct
|
|
to the Area Table. It describes those address aggregates
|
|
that are configured to be propagated from an area.
|
|
Its purpose is to reduce the amount of information
|
|
that is known beyond an Area's borders.
|
|
|
|
It contains a set of IP address ranges
|
|
specified by an IP address/IP network mask pair.
|
|
For example, a class B address range of X.X.X.X
|
|
with a network mask of 255.255.0.0 includes all IP
|
|
addresses from X.X.0.0 to X.X.255.255.
|
|
|
|
Note that if ranges are configured such that one range
|
|
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
|
|
and 10.1.0.0 mask 255.255.0.0),
|
|
the most specific match is the preferred one."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspf 14 }
|
|
|
|
rlOspfAreaAggregateEntry OBJECT-TYPE
|
|
SYNTAX RlOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single area aggregate entry.
|
|
|
|
Information in this table is persistent and when this object
|
|
is written the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
INDEX { rlOspfAreaAggregateProcessId,
|
|
rlOspfAreaAggregateAreaID, rlOspfAreaAggregateLsdbType,
|
|
rlOspfAreaAggregateNet, rlOspfAreaAggregateMask }
|
|
::= { rlOspfAreaAggregateTable 1 }
|
|
|
|
RlOspfAreaAggregateEntry ::=
|
|
SEQUENCE {
|
|
rlOspfAreaAggregateProcessId
|
|
RlOspfProcessID,
|
|
rlOspfAreaAggregateAreaID
|
|
AreaID,
|
|
rlOspfAreaAggregateLsdbType
|
|
INTEGER,
|
|
rlOspfAreaAggregateNet
|
|
IpAddress,
|
|
rlOspfAreaAggregateMask
|
|
IpAddress,
|
|
rlOspfAreaAggregateStatus
|
|
RowStatus,
|
|
rlOspfAreaAggregateEffect
|
|
INTEGER,
|
|
rlOspfAreaAggregateExtRouteTag
|
|
Unsigned32
|
|
}
|
|
|
|
rlOspfAreaAggregateProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfAreaAggregateEntry 1 }
|
|
|
|
rlOspfAreaAggregateAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area within which the address aggregate is to be
|
|
found."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaAggregateEntry 2 }
|
|
|
|
rlOspfAreaAggregateLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
summaryLink (3),
|
|
nssaExternalLink (7)
|
|
}
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the address aggregate. This field
|
|
specifies the Lsdb type that this address
|
|
aggregate applies to."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { rlOspfAreaAggregateEntry 3 }
|
|
|
|
rlOspfAreaAggregateNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the net or subnet indicated
|
|
by the range."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaAggregateEntry 4 }
|
|
|
|
rlOspfAreaAggregateMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask that pertains to the net or
|
|
subnet."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAreaAggregateEntry 5 }
|
|
|
|
rlOspfAreaAggregateStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by
|
|
facilitating actions such as row creation,
|
|
construction, and destruction.
|
|
|
|
The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified."
|
|
::= { rlOspfAreaAggregateEntry 6 }
|
|
|
|
rlOspfAreaAggregateEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertiseMatching (1),
|
|
doNotAdvertiseMatching (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnets subsumed by ranges either trigger the
|
|
advertisement of the indicated aggregate
|
|
(advertiseMatching) or result in the subnet's not
|
|
being advertised at all outside the area."
|
|
DEFVAL { advertiseMatching }
|
|
::= { rlOspfAreaAggregateEntry 7 }
|
|
|
|
rlOspfAreaAggregateExtRouteTag OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External route tag to be included in NSSA (type-7)
|
|
LSAs."
|
|
DEFVAL { 0 }
|
|
::= { rlOspfAreaAggregateEntry 8 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Link State Database, Link-Local for non-virtual links
|
|
|
|
-- This table is identical to the OSPF LSDB Table in
|
|
-- format, but contains only Link-Local Link State
|
|
-- Advertisements for non-virtual links. The purpose is
|
|
-- to allow Link-Local LSAs to be displayed for each
|
|
-- non-virtual interface. This table is implemented to
|
|
-- support type-9 LSAs which are defined in
|
|
-- "The OSPF Opaque LSA Option".
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfLocalLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfLocalLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's link-local link state database
|
|
for non-virtual links.
|
|
This table is identical to the OSPF LSDB Table
|
|
in format, but contains only link-local Link State
|
|
Advertisements for non-virtual links. The purpose is
|
|
to allow link-local LSAs to be displayed for each
|
|
non-virtual interface. This table is implemented to
|
|
support type-9 LSAs that are defined
|
|
in 'The OSPF Opaque LSA Option'."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Advertisements
|
|
and The OSPF Opaque LSA Option"
|
|
::= { rlOspf 18 }
|
|
|
|
rlOspfLocalLsdbEntry OBJECT-TYPE
|
|
SYNTAX RlOspfLocalLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single link state advertisement."
|
|
INDEX { rlOspfLocalLsdbProcessId,
|
|
rlOspfLocalLsdbIpAddress, rlOspfLocalLsdbAddressLessIf,
|
|
rlOspfLocalLsdbType, rlOspfLocalLsdbLsid, rlOspfLocalLsdbRouterId
|
|
}
|
|
::= { rlOspfLocalLsdbTable 1 }
|
|
|
|
RlOspfLocalLsdbEntry ::=
|
|
SEQUENCE {
|
|
rlOspfLocalLsdbProcessId
|
|
Unsigned32,
|
|
rlOspfLocalLsdbIpAddress
|
|
IpAddress,
|
|
rlOspfLocalLsdbAddressLessIf
|
|
InterfaceIndexOrZero,
|
|
rlOspfLocalLsdbType
|
|
INTEGER,
|
|
rlOspfLocalLsdbLsid
|
|
IpAddress,
|
|
rlOspfLocalLsdbRouterId
|
|
RouterID,
|
|
rlOspfLocalLsdbSequence
|
|
Integer32,
|
|
rlOspfLocalLsdbAge
|
|
Integer32,
|
|
rlOspfLocalLsdbChecksum
|
|
Integer32,
|
|
rlOspfLocalLsdbAdvertisement
|
|
OCTET STRING,
|
|
rlOspfLocalLsdbAreaId
|
|
AreaID
|
|
}
|
|
|
|
rlOspfLocalLsdbProcessId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies this OSPF entity."
|
|
::= { rlOspfLocalLsdbEntry 1 }
|
|
|
|
rlOspfLocalLsdbIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface from
|
|
which the LSA was received if the interface is
|
|
numbered."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Interface parameters"
|
|
::= { rlOspfLocalLsdbEntry 2 }
|
|
|
|
rlOspfLocalLsdbAddressLessIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface from
|
|
which the LSA was received if the interface is
|
|
unnumbered."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Interface parameters"
|
|
::= { rlOspfLocalLsdbEntry 3 }
|
|
|
|
rlOspfLocalLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER { localOpaqueLink (9) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate
|
|
advertisement format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { rlOspfLocalLsdbEntry 4 }
|
|
|
|
rlOspfLocalLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing a 32-bit identifier in IP address format;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfLocalLsdbEntry 5 }
|
|
|
|
rlOspfLocalLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfLocalLsdbEntry 6 }
|
|
|
|
rlOspfLocalLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It starts with the value '80000001'h,
|
|
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
|
|
Thus, a typical sequence number will be very negative.
|
|
It is used to detect old and duplicate link state
|
|
advertisements. The space of sequence numbers is linearly
|
|
ordered. The larger the sequence number, the more recent
|
|
the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rlOspfLocalLsdbEntry 7 }
|
|
|
|
rlOspfLocalLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge, except when
|
|
-- doNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfLocalLsdbEntry 8 }
|
|
|
|
rlOspfLocalLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfLocalLsdbEntry 9 }
|
|
|
|
rlOspfLocalLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire link state advertisement, including
|
|
its header.
|
|
|
|
Note that for variable length LSAs, SNMP agents
|
|
may not be able to return the largest string size."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State
|
|
Advertisements"
|
|
::= { rlOspfLocalLsdbEntry 10 }
|
|
|
|
rlOspfLocalLsdbAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF area in which the link belongs."
|
|
::= { rlOspfLocalLsdbEntry 11 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Link State Database, link-local for virtual Links
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfVirtLocalLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfVirtLocalLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's link-local link state database
|
|
for virtual links.
|
|
|
|
This table is identical to the OSPF LSDB Table
|
|
in format, but contains only link-local Link State
|
|
Advertisements for virtual links. The purpose is to
|
|
allow link-local LSAs to be displayed for each virtual
|
|
interface. This table is implemented to support type-9 LSAs
|
|
that are defined in 'The OSPF Opaque LSA Option'."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State
|
|
Advertisements and The OSPF Opaque LSA Option"
|
|
::= { rlOspf 19 }
|
|
|
|
rlOspfVirtLocalLsdbEntry OBJECT-TYPE
|
|
SYNTAX RlOspfVirtLocalLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single link state advertisement."
|
|
INDEX { rlOspfVirtLocalLsdbProcessId,
|
|
rlOspfVirtLocalLsdbTransitArea,
|
|
rlOspfVirtLocalLsdbNeighbor,
|
|
rlOspfVirtLocalLsdbType,
|
|
rlOspfVirtLocalLsdbLsid,
|
|
rlOspfVirtLocalLsdbRouterId
|
|
}
|
|
::= { rlOspfVirtLocalLsdbTable 1 }
|
|
|
|
RlOspfVirtLocalLsdbEntry ::=
|
|
SEQUENCE {
|
|
rlOspfVirtLocalLsdbProcessId
|
|
Unsigned32,
|
|
rlOspfVirtLocalLsdbTransitArea
|
|
AreaID,
|
|
rlOspfVirtLocalLsdbNeighbor
|
|
RouterID,
|
|
rlOspfVirtLocalLsdbType
|
|
INTEGER,
|
|
rlOspfVirtLocalLsdbLsid
|
|
IpAddress,
|
|
rlOspfVirtLocalLsdbRouterId
|
|
RouterID,
|
|
rlOspfVirtLocalLsdbSequence
|
|
Integer32,
|
|
rlOspfVirtLocalLsdbAge
|
|
Integer32,
|
|
rlOspfVirtLocalLsdbChecksum
|
|
Integer32,
|
|
rlOspfVirtLocalLsdbAdvertisement
|
|
OCTET STRING
|
|
}
|
|
|
|
rlOspfVirtLocalLsdbProcessId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies this OSPF entity."
|
|
::= { rlOspfVirtLocalLsdbEntry 1 }
|
|
|
|
rlOspfVirtLocalLsdbTransitArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transit area that the virtual link
|
|
traverses. By definition, this is not 0.0.0.0."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Interface parameters"
|
|
::= { rlOspfVirtLocalLsdbEntry 2 }
|
|
|
|
rlOspfVirtLocalLsdbNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the virtual neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Interface parameters"
|
|
::= { rlOspfVirtLocalLsdbEntry 3 }
|
|
|
|
rlOspfVirtLocalLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER { localOpaqueLink (9) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate
|
|
advertisement format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { rlOspfVirtLocalLsdbEntry 4 }
|
|
|
|
rlOspfVirtLocalLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing a 32-bit identifier in IP address format;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfVirtLocalLsdbEntry 5 }
|
|
|
|
rlOspfVirtLocalLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfVirtLocalLsdbEntry 6 }
|
|
|
|
rlOspfVirtLocalLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It starts with the value '80000001'h,
|
|
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
|
|
Thus, a typical sequence number will be very negative.
|
|
It is used to detect old and duplicate link state
|
|
advertisements. The space of sequence numbers is linearly
|
|
ordered. The larger the sequence number, the more recent
|
|
the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rlOspfVirtLocalLsdbEntry 7 }
|
|
|
|
rlOspfVirtLocalLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge, except when
|
|
-- doNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfVirtLocalLsdbEntry 8 }
|
|
|
|
rlOspfVirtLocalLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly
|
|
referred to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfVirtLocalLsdbEntry 9 }
|
|
|
|
rlOspfVirtLocalLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire link state advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State
|
|
Advertisements.
|
|
|
|
Note that for variable length LSAs, SNMP agents
|
|
may not be able to return the largest string size."
|
|
::= { rlOspfVirtLocalLsdbEntry 10 }
|
|
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Traps Control
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfEnableTrapsOspfErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask indicating enable SNMP notifications for OSPF errors.
|
|
|
|
Bit 0, if set, for authenticationFailure trap.
|
|
enables only the ospfIfFailure trap.
|
|
Allows SNMP notifications to be sent when a packet has been
|
|
received on a nonvirtual interface from a neighbor router whose
|
|
authentication key or authentication type conflicts with the
|
|
authentication key or authentication type of this router.
|
|
|
|
Bit 1, if set, for badPacket trap.
|
|
enables only the ospfIfRxBadPacket trap. Allows SNMP
|
|
notifications to be sent when an OSPF packet that has not been parsed
|
|
has been received on a nonvirtual interface.
|
|
|
|
Bit 2, if set, for configError trap.
|
|
enables only the ospfIfConfigError trap. Sends SNMP
|
|
notifications when a packet has been received in a nonvirtual interface
|
|
from a neighbor router whose configuration parameters conflict with the
|
|
configuration parameters of this router.
|
|
|
|
Bit 3, if set, for virtAuthenticationFailure trap.
|
|
enables only the ospfVirtIfFailure trap.
|
|
Allows SNMP notifications to be sent when a packet has been received on
|
|
a virtual interface from a neighbor router whose authentication key or
|
|
authentication type conflicts with the authentication key or authentication
|
|
type of this router.
|
|
|
|
Bit 4, if set, for virtBadPacket trap.
|
|
enables only the ospfVirtIfRxBadPacket trap. Allows SNMP
|
|
notifications to be sent when an OSPF packet that has not been parsed
|
|
has been received on a virtual interface.
|
|
|
|
Bit 5, if set, for virtConfigError trap.
|
|
enables only the ospfVirtIfConfigError trap. Sends SNMP
|
|
notifications when a packet has been received in a virtual interface from
|
|
a neighbor router whose configuration parameters conflict with the configuration
|
|
parameters of this router."
|
|
::= { rlOspf 20 }
|
|
|
|
rlOspfEnableTrapsOspfLsa OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask indicating enable SNMP notifications for OSPF LSA
|
|
|
|
Bit 0, if set, for maxAgeLsa trap.
|
|
enable the ospfMaxAgeLsa trap.
|
|
|
|
Bit 1, if set, for originateLsa trap.
|
|
enable the ospfOriginateLsa trap.
|
|
|
|
When the originateLsa trap is enabled, it will not be invoked for
|
|
simple LSA refreshes that take place every 30 minutes or when an LSA
|
|
has reached its maximum age and is being flushed."
|
|
::= { rlOspf 21 }
|
|
|
|
rlOspfEnableTrapsOspfRateLimitSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the rate limit window size, in seconds. A number from 2 to 60.
|
|
The default value is 10."
|
|
DEFVAL { 10 }
|
|
::= { rlOspf 22 }
|
|
|
|
rlOspfEnableTrapsOspfRateLimitTrapNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the maximum number of traps sent during the window time.
|
|
A number from 0 to 300.
|
|
The default number is 7."
|
|
DEFVAL { 7 }
|
|
::= { rlOspf 23 }
|
|
|
|
rlOspfEnableTrapsOspfTransmit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask indicating enable SNMP notifications for OSPF transmit
|
|
|
|
Bit 0, if set, for packets trap.
|
|
enables only the ospfTxRetransmit trap.
|
|
Allows SNMP notifications to be sent when an OSPF packet has been
|
|
re-sent on a nonvirtual interface.
|
|
|
|
Bit 1, if set, for virtPackets trap.
|
|
enables only the ospfVirtTxRetransmit trap.
|
|
Allows SNMP notifications to be sent when an OSPF packet has been
|
|
re-sent on a virtual interface."
|
|
::= { rlOspf 24 }
|
|
|
|
rlOspfEnableTrapsOspfStateChange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask indicating enable SNMP notifications for OSPF State Change.
|
|
|
|
Bit 0, if set, for ifStateChange trap.
|
|
only the ospfIfStateChange trap.
|
|
Sends SNMP notifications when there has been a change in the state
|
|
of a non-virtual OSPF interface.
|
|
|
|
Bit 1, if set, for neighborStateChange trap.
|
|
enables only the ospfNbrStateChange trap.
|
|
Sends SNMP notifications when there has been a change in the state
|
|
of a non-virtual OSPF neighbor.
|
|
|
|
Bit 2, if set, for ospfVirtIfStateChange trap.
|
|
only the ospfVirtIfStateChange trap.
|
|
Sends SNMP notifications when there has been a change in the state
|
|
of a virtual OSPF interface.
|
|
|
|
Bit 3, if set, for ospfVirtNbrStateChange trap.
|
|
enables only the ospfVirtNbrStateChange trap.
|
|
Sends SNMP notifications when there has been a change in the state
|
|
of a virtual OSPF neighbor."
|
|
::= { rlOspf 25 }
|
|
|
|
|
|
|
|
-- extensions
|
|
|
|
rlOspfExt OBJECT IDENTIFIER ::= { rlOspf 26 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Router LSA Extention
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- OSPF Link State Database
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
-- This table is defined per OSPF process to supports multi OSPF instance
|
|
------------------------------------------------------------------------------
|
|
|
|
rlOspfBrRouterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfBrRouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Router Link State Advertisement."
|
|
::= { rlOspfExt 1 }
|
|
|
|
|
|
rlOspfBrRouterEntry OBJECT-TYPE
|
|
SYNTAX RlOspfBrRouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry from Router LSA."
|
|
INDEX { rlOspfBrRouterProcessId,
|
|
rlOspfBrRouterAreaId,
|
|
rlOspfBrRouterRouterId,
|
|
rlOspfBrRouterNextHopIp,
|
|
rlOspfBrRouterOutIf
|
|
}
|
|
::= { rlOspfBrRouterTable 1 }
|
|
|
|
RlOspfBrRouterEntry ::=
|
|
SEQUENCE {
|
|
rlOspfBrRouterProcessId
|
|
RlOspfProcessID,
|
|
rlOspfBrRouterAreaId
|
|
AreaID,
|
|
rlOspfBrRouterRouterId
|
|
RouterID,
|
|
rlOspfBrRouterNextHopIp
|
|
IpAddress,
|
|
rlOspfBrRouterOutIf
|
|
InterfaceIndexOrZero,
|
|
rlOspfBrRouterRouteType
|
|
INTEGER,
|
|
rlOspfBrRouterRouteCost
|
|
Unsigned32,
|
|
rlOspfBrRouterRouterType
|
|
INTEGER
|
|
}
|
|
|
|
|
|
rlOspfBrRouterProcessId OBJECT-TYPE
|
|
SYNTAX RlOspfProcessID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an OSPF process."
|
|
::= { rlOspfBrRouterEntry 1 }
|
|
|
|
rlOspfBrRouterAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Route Area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfBrRouterEntry 2 }
|
|
|
|
rlOspfBrRouterRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfBrRouterEntry 3 }
|
|
|
|
rlOspfBrRouterNextHopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hext Hop IP Address."
|
|
::= { rlOspfBrRouterEntry 4 }
|
|
|
|
rlOspfBrRouterOutIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outgoing interface toward the destination."
|
|
::= { rlOspfBrRouterEntry 5 }
|
|
|
|
|
|
rlOspfBrRouterRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
intra(1),
|
|
inter(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"intra is intra-area route. inter is inter-area route."
|
|
::= { rlOspfBrRouterEntry 6 }
|
|
|
|
rlOspfBrRouterRouteCost OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cost of using this route."
|
|
::= { rlOspfBrRouterEntry 7 }
|
|
|
|
|
|
rlOspfBrRouterRouterType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
abr(1),
|
|
asbr(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The border router type: ABR, ASBR or both ABR and ASBR."
|
|
::= { rlOspfBrRouterEntry 8 }
|
|
|
|
|
|
rlOspfNameLookupEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure Open Shortest Path First (OSPF) to look up Domain Name System (DNS) names for
|
|
use in all OSPF show EXEC command displays, use the ip ospf name-lookup command in global
|
|
configuration mode. To disable this function, use the no form of this command."
|
|
::= { rlOspfExt 2 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- End of OSPF Router LSA Extention
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
END
|