WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/cisco/ME1200-PTP-MIB

2297 lines
84 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- PTP-MIB: ME1200 Private MIB
--
--
-- ****************************************************************
ME1200-PTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
me1200SwitchMgmt
FROM CISCOME1200-MIB
ME1200Integer16 FROM ME1200-TC
ME1200Integer64 FROM ME1200-TC
ME1200InterfaceIndex FROM ME1200-TC
ME1200RowEditorState FROM ME1200-TC
ME1200Unsigned16 FROM ME1200-TC
ME1200Unsigned64 FROM ME1200-TC
ME1200Unsigned8 FROM ME1200-TC
Integer32 FROM SNMPv2-SMI
IpAddress FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
MacAddress FROM SNMPv2-TC
TruthValue FROM SNMPv2-TC
;
me1200PtpMib MODULE-IDENTITY
LAST-UPDATED "201507060000Z"
ORGANIZATION
"Cisco Systems, Inc"
CONTACT-INFO
"Cisco Systems, Inc
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-me1200@cisco.com"
DESCRIPTION
"Private PTP MIB."
REVISION "201507060000Z"
DESCRIPTION
"Added hardware clock domain, support for profiles and fields related to
8275.1"
REVISION "201503260000Z"
DESCRIPTION
"Added attribute Dscp to PtpConfigClocksDefaultDs"
REVISION "201404140000Z"
DESCRIPTION
"Initial version"
::= { me1200SwitchMgmt 65 }
ME1200ptpClockPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { initializing(0), faulty(1), disabled(2), listening(3), preMaster(4), master(5), passive(6), uncalibrated(7), slave(8), p2pTransparent(9), e2eTransparent(10) }
ME1200ptpDestAdrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { default(0), linkLocal(1) }
ME1200ptpDeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { none(0), ordBound(1), p2pTransparent(2), e2eTransparent(3), masterOnly(4), slaveOnly(5) }
ME1200ptpExtClock1pps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { onePpsDisable(0), onePpsOutput(1), onePpsInput(2) }
ME1200ptpPreferredAdj ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { preferredAdjLtc(0), preferredAdjSyncE(1), preferredAdjXO(2), preferredAdjLtcPhase(3) }
ME1200ptpProfile ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { noProfile(0), ieee1588(1), g8265(2), g8275(3) }
ME1200ptpProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { ethernet(0), ethernetMixed(1), ip4multi(2), ip4mixed(3), ip4uni(4), oam(5), onePps(6) }
ME1200ptpServoClockOption ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { clockFree(0), clockSyncE(1) }
ME1200ptpSlaveClockState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { slaveClockStateFreerun(0), slaveClockStateFreqLocking(1), slaveClockStatePhaseLocking(2), slaveClockStateLocked(3), slaveClockStateHoldover(4), slaveClockStateInvalid(5) }
ME1200ptpSystemTimeSyncMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { systemTimeNoSync(0), systemTimeSyncGet(1), systemTimeSyncSet(2) }
ME1200ptpUcCommState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"-"
SYNTAX INTEGER { idle(0), initializing(1), connected(2), selected(3), synced(4) }
me1200PtpMibObjects OBJECT IDENTIFIER
::= { me1200PtpMib 1 }
me1200PtpCapabilities OBJECT IDENTIFIER
::= { me1200PtpMibObjects 1 }
me1200PtpCapabilitiesGlobals OBJECT IDENTIFIER
::= { me1200PtpCapabilities 1 }
me1200PtpCapabilitiesGlobalsClockCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PTP clocks supported by the device."
::= { me1200PtpCapabilitiesGlobals 1 }
me1200PtpConfig OBJECT IDENTIFIER
::= { me1200PtpMibObjects 2 }
me1200PtpConfigGlobals OBJECT IDENTIFIER
::= { me1200PtpConfig 1 }
me1200PtpConfigGlobalsExternalClockMode OBJECT IDENTIFIER
::= { me1200PtpConfigGlobals 1 }
me1200PtpConfigGlobalsExternalClockModeOnePpsMode OBJECT-TYPE
SYNTAX ME1200ptpExtClock1pps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of the PPS pin."
::= { me1200PtpConfigGlobalsExternalClockMode 1 }
me1200PtpConfigGlobalsExternalClockModeExternalEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"External enable of PPS output."
::= { me1200PtpConfigGlobalsExternalClockMode 2 }
me1200PtpConfigGlobalsExternalClockModeAdjustMethod OBJECT-TYPE
SYNTAX ME1200ptpPreferredAdj
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The adjustment method of the PPS external output.
0: LTC Frequency
1: SyncE DPLL
2: Oscillator
3: LTC Phase"
::= { me1200PtpConfigGlobalsExternalClockMode 3 }
me1200PtpConfigGlobalsExternalClockModeClockFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency in hertz (Hz) of the PPS external output."
::= { me1200PtpConfigGlobalsExternalClockMode 4 }
me1200PtpConfigGlobalsSystemTimeSyncMode OBJECT IDENTIFIER
::= { me1200PtpConfigGlobals 2 }
me1200PtpConfigGlobalsSystemTimeSyncModeMode OBJECT-TYPE
SYNTAX ME1200ptpSystemTimeSyncMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode of the System time <-> ptp time synchronization."
::= { me1200PtpConfigGlobalsSystemTimeSyncMode 1 }
me1200PtpConfigClocks OBJECT IDENTIFIER
::= { me1200PtpConfig 2 }
me1200PtpConfigClocksDefaultDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksDefaultDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks DefaultDS."
::= { me1200PtpConfigClocks 1 }
me1200PtpConfigClocksDefaultDsEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksDefaultDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksDefaultDsClockId }
::= { me1200PtpConfigClocksDefaultDsTable 1 }
ME1200PtpConfigClocksDefaultDsEntry ::= SEQUENCE {
me1200PtpConfigClocksDefaultDsClockId Integer32,
me1200PtpConfigClocksDefaultDsDeviceType ME1200ptpDeviceType,
me1200PtpConfigClocksDefaultDsTwoStepFlag TruthValue,
me1200PtpConfigClocksDefaultDsPriority1 ME1200Unsigned8,
me1200PtpConfigClocksDefaultDsPriority2 ME1200Unsigned8,
me1200PtpConfigClocksDefaultDsOneWay TruthValue,
me1200PtpConfigClocksDefaultDsDomainNumber ME1200Unsigned8,
me1200PtpConfigClocksDefaultDsProtocol ME1200ptpProtocol,
me1200PtpConfigClocksDefaultDsVlanTagEnable TruthValue,
me1200PtpConfigClocksDefaultDsVid ME1200Unsigned16,
me1200PtpConfigClocksDefaultDsPcp ME1200Unsigned8,
me1200PtpConfigClocksDefaultDsMep Integer32,
me1200PtpConfigClocksDefaultDsClkDom Unsigned32,
me1200PtpConfigClocksDefaultDsDscp ME1200Unsigned8,
me1200PtpConfigClocksDefaultDsProfile ME1200ptpProfile,
me1200PtpConfigClocksDefaultDsLocalPriority ME1200Unsigned8,
me1200PtpConfigClocksDefaultDsAction ME1200RowEditorState
}
me1200PtpConfigClocksDefaultDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksDefaultDsEntry 1 }
me1200PtpConfigClocksDefaultDsDeviceType OBJECT-TYPE
SYNTAX ME1200ptpDeviceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PTP clock type."
::= { me1200PtpConfigClocksDefaultDsEntry 2 }
me1200PtpConfigClocksDefaultDsTwoStepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether clock uses follow-up packets."
::= { me1200PtpConfigClocksDefaultDsEntry 3 }
me1200PtpConfigClocksDefaultDsPriority1 OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority1 value."
::= { me1200PtpConfigClocksDefaultDsEntry 4 }
me1200PtpConfigClocksDefaultDsPriority2 OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority2 value."
::= { me1200PtpConfigClocksDefaultDsEntry 5 }
me1200PtpConfigClocksDefaultDsOneWay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether clock uses sync packets only."
::= { me1200PtpConfigClocksDefaultDsEntry 6 }
me1200PtpConfigClocksDefaultDsDomainNumber OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain number."
::= { me1200PtpConfigClocksDefaultDsEntry 7 }
me1200PtpConfigClocksDefaultDsProtocol OBJECT-TYPE
SYNTAX ME1200ptpProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be used for the encapsulation of the PTP packets."
::= { me1200PtpConfigClocksDefaultDsEntry 8 }
me1200PtpConfigClocksDefaultDsVlanTagEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether clock uses sync packets only."
::= { me1200PtpConfigClocksDefaultDsEntry 9 }
me1200PtpConfigClocksDefaultDsVid OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN id (if VLAN tagging is enabled)."
::= { me1200PtpConfigClocksDefaultDsEntry 10 }
me1200PtpConfigClocksDefaultDsPcp OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value (if VLAN tagging is enabled)."
::= { me1200PtpConfigClocksDefaultDsEntry 11 }
me1200PtpConfigClocksDefaultDsMep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mep instance number (if protocol is OAM)."
::= { me1200PtpConfigClocksDefaultDsEntry 12 }
me1200PtpConfigClocksDefaultDsClkDom OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clock domain used."
::= { me1200PtpConfigClocksDefaultDsEntry 13 }
me1200PtpConfigClocksDefaultDsDscp OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP field value (if protocol is IPv4)."
::= { me1200PtpConfigClocksDefaultDsEntry 14 }
me1200PtpConfigClocksDefaultDsProfile OBJECT-TYPE
SYNTAX ME1200ptpProfile
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PTP profile."
::= { me1200PtpConfigClocksDefaultDsEntry 15 }
me1200PtpConfigClocksDefaultDsLocalPriority OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local priority value."
::= { me1200PtpConfigClocksDefaultDsEntry 16 }
me1200PtpConfigClocksDefaultDsAction OBJECT-TYPE
SYNTAX ME1200RowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { me1200PtpConfigClocksDefaultDsEntry 100 }
me1200PtpConfigClocksDefaultDsTableRowEditor OBJECT IDENTIFIER
::= { me1200PtpConfigClocks 2 }
me1200PtpConfigClocksDefaultDsTableRowEditorClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 1 }
me1200PtpConfigClocksDefaultDsTableRowEditorDeviceType OBJECT-TYPE
SYNTAX ME1200ptpDeviceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PTP clock type."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 2 }
me1200PtpConfigClocksDefaultDsTableRowEditorTwoStepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether clock uses follow-up packets."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 3 }
me1200PtpConfigClocksDefaultDsTableRowEditorPriority1 OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority1 value."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 4 }
me1200PtpConfigClocksDefaultDsTableRowEditorPriority2 OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority2 value."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 5 }
me1200PtpConfigClocksDefaultDsTableRowEditorOneWay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether clock uses sync packets only."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 6 }
me1200PtpConfigClocksDefaultDsTableRowEditorDomainNumber OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain number."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 7 }
me1200PtpConfigClocksDefaultDsTableRowEditorProtocol OBJECT-TYPE
SYNTAX ME1200ptpProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be used for the encapsulation of the PTP packets."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 8 }
me1200PtpConfigClocksDefaultDsTableRowEditorVlanTagEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether clock uses sync packets only."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 9 }
me1200PtpConfigClocksDefaultDsTableRowEditorVid OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN id (if VLAN tagging is enabled)."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 10 }
me1200PtpConfigClocksDefaultDsTableRowEditorPcp OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value (if VLAN tagging is enabled)."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 11 }
me1200PtpConfigClocksDefaultDsTableRowEditorMep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mep instance number (if protocol is OAM)."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 12 }
me1200PtpConfigClocksDefaultDsTableRowEditorClkDom OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clock domain used."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 13 }
me1200PtpConfigClocksDefaultDsTableRowEditorDscp OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP field value (if protocol is IPv4)."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 14 }
me1200PtpConfigClocksDefaultDsTableRowEditorProfile OBJECT-TYPE
SYNTAX ME1200ptpProfile
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PTP profile."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 15 }
me1200PtpConfigClocksDefaultDsTableRowEditorLocalPriority OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local priority value."
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 16 }
me1200PtpConfigClocksDefaultDsTableRowEditorAction OBJECT-TYPE
SYNTAX ME1200RowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { me1200PtpConfigClocksDefaultDsTableRowEditor 100 }
me1200PtpConfigClocksTimePropertiesDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksTimePropertiesDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks TimePropertiesDS."
::= { me1200PtpConfigClocks 3 }
me1200PtpConfigClocksTimePropertiesDsEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksTimePropertiesDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksTimePropertiesDsClockId }
::= { me1200PtpConfigClocksTimePropertiesDsTable 1 }
ME1200PtpConfigClocksTimePropertiesDsEntry ::= SEQUENCE {
me1200PtpConfigClocksTimePropertiesDsClockId Integer32,
me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffset ME1200Integer16,
me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffsetValid TruthValue,
me1200PtpConfigClocksTimePropertiesDsLeap59 TruthValue,
me1200PtpConfigClocksTimePropertiesDsLeap61 TruthValue,
me1200PtpConfigClocksTimePropertiesDsTimeTraceable TruthValue,
me1200PtpConfigClocksTimePropertiesDsFrequencyTraceable TruthValue,
me1200PtpConfigClocksTimePropertiesDsPtpTimescale TruthValue,
me1200PtpConfigClocksTimePropertiesDsTimeSource ME1200Unsigned8
}
me1200PtpConfigClocksTimePropertiesDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksTimePropertiesDsEntry 1 }
me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffset OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current UTC time offset."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 2 }
me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the current UTC time offset value is valid."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 3 }
me1200PtpConfigClocksTimePropertiesDsLeap59 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the last minute of the day has only 59 seconds."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 4 }
me1200PtpConfigClocksTimePropertiesDsLeap61 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the last minute of the day has 61 seconds."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 5 }
me1200PtpConfigClocksTimePropertiesDsTimeTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that time is traceable to a primary reference."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 6 }
me1200PtpConfigClocksTimePropertiesDsFrequencyTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that frequency is traceable to a primary reference."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 7 }
me1200PtpConfigClocksTimePropertiesDsPtpTimescale OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether timescale of the grandmaster clock is PTP."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 8 }
me1200PtpConfigClocksTimePropertiesDsTimeSource OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source of time used by the grandmaster clock."
::= { me1200PtpConfigClocksTimePropertiesDsEntry 9 }
me1200PtpConfigClocksFilterParametersTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksFilterParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks filter parameters."
::= { me1200PtpConfigClocks 4 }
me1200PtpConfigClocksFilterParametersEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksFilterParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksFilterParametersClockId }
::= { me1200PtpConfigClocksFilterParametersTable 1 }
ME1200PtpConfigClocksFilterParametersEntry ::= SEQUENCE {
me1200PtpConfigClocksFilterParametersClockId Integer32,
me1200PtpConfigClocksFilterParametersDelayFilter Unsigned32,
me1200PtpConfigClocksFilterParametersFilterType Unsigned32,
me1200PtpConfigClocksFilterParametersPeriod Unsigned32,
me1200PtpConfigClocksFilterParametersDist Unsigned32
}
me1200PtpConfigClocksFilterParametersClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksFilterParametersEntry 1 }
me1200PtpConfigClocksFilterParametersDelayFilter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the time constant of the delay filter."
::= { me1200PtpConfigClocksFilterParametersEntry 2 }
me1200PtpConfigClocksFilterParametersFilterType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the type of filter/servo used."
::= { me1200PtpConfigClocksFilterParametersEntry 3 }
me1200PtpConfigClocksFilterParametersPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the period of the offset filter."
::= { me1200PtpConfigClocksFilterParametersEntry 4 }
me1200PtpConfigClocksFilterParametersDist OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the dist value of the offset filter."
::= { me1200PtpConfigClocksFilterParametersEntry 5 }
me1200PtpConfigClocksServoParametersTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksServoParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks servo parameters."
::= { me1200PtpConfigClocks 5 }
me1200PtpConfigClocksServoParametersEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksServoParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksServoParametersClockId }
::= { me1200PtpConfigClocksServoParametersTable 1 }
ME1200PtpConfigClocksServoParametersEntry ::= SEQUENCE {
me1200PtpConfigClocksServoParametersClockId Integer32,
me1200PtpConfigClocksServoParametersDisplay TruthValue,
me1200PtpConfigClocksServoParametersPEnable TruthValue,
me1200PtpConfigClocksServoParametersIEnable TruthValue,
me1200PtpConfigClocksServoParametersDEnable TruthValue,
me1200PtpConfigClocksServoParametersPval Unsigned32,
me1200PtpConfigClocksServoParametersIval Unsigned32,
me1200PtpConfigClocksServoParametersDval Unsigned32,
me1200PtpConfigClocksServoParametersSrvOption ME1200ptpServoClockOption,
me1200PtpConfigClocksServoParametersSynceThreshold Unsigned32,
me1200PtpConfigClocksServoParametersSynceAp Unsigned32,
me1200PtpConfigClocksServoParametersHoFilter Integer32,
me1200PtpConfigClocksServoParametersStableAdjThreshold ME1200Unsigned64
}
me1200PtpConfigClocksServoParametersClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksServoParametersEntry 1 }
me1200PtpConfigClocksServoParametersDisplay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether output shall be sent to the debug terminal."
::= { me1200PtpConfigClocksServoParametersEntry 2 }
me1200PtpConfigClocksServoParametersPEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether P-value of servo algorithm shall be used."
::= { me1200PtpConfigClocksServoParametersEntry 3 }
me1200PtpConfigClocksServoParametersIEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether I-value of servo algorithm shall be used."
::= { me1200PtpConfigClocksServoParametersEntry 4 }
me1200PtpConfigClocksServoParametersDEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether D-value of servo algorithm shall be used."
::= { me1200PtpConfigClocksServoParametersEntry 5 }
me1200PtpConfigClocksServoParametersPval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"P-value of the offset filter."
::= { me1200PtpConfigClocksServoParametersEntry 6 }
me1200PtpConfigClocksServoParametersIval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"I-value of the offset filter."
::= { me1200PtpConfigClocksServoParametersEntry 7 }
me1200PtpConfigClocksServoParametersDval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"D-value of the offset filter."
::= { me1200PtpConfigClocksServoParametersEntry 8 }
me1200PtpConfigClocksServoParametersSrvOption OBJECT-TYPE
SYNTAX ME1200ptpServoClockOption
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"D-value of the offset filter."
::= { me1200PtpConfigClocksServoParametersEntry 9 }
me1200PtpConfigClocksServoParametersSynceThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SyncE Threshold"
::= { me1200PtpConfigClocksServoParametersEntry 10 }
me1200PtpConfigClocksServoParametersSynceAp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SyncE Ap"
::= { me1200PtpConfigClocksServoParametersEntry 11 }
me1200PtpConfigClocksServoParametersHoFilter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Holdoff low pass filter constant."
::= { me1200PtpConfigClocksServoParametersEntry 12 }
me1200PtpConfigClocksServoParametersStableAdjThreshold OBJECT-TYPE
SYNTAX ME1200Unsigned64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold at which offset is assumed to be stable."
::= { me1200PtpConfigClocksServoParametersEntry 13 }
me1200PtpConfigClocksSlaveConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksSlaveConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks slave configuration."
::= { me1200PtpConfigClocks 6 }
me1200PtpConfigClocksSlaveConfigEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksSlaveConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksSlaveConfigClockId }
::= { me1200PtpConfigClocksSlaveConfigTable 1 }
ME1200PtpConfigClocksSlaveConfigEntry ::= SEQUENCE {
me1200PtpConfigClocksSlaveConfigClockId Integer32,
me1200PtpConfigClocksSlaveConfigStableOffset Unsigned32,
me1200PtpConfigClocksSlaveConfigOffsetOk Unsigned32,
me1200PtpConfigClocksSlaveConfigOffsetFail Unsigned32
}
me1200PtpConfigClocksSlaveConfigClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksSlaveConfigEntry 1 }
me1200PtpConfigClocksSlaveConfigStableOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stable offset threshold in ns."
::= { me1200PtpConfigClocksSlaveConfigEntry 2 }
me1200PtpConfigClocksSlaveConfigOffsetOk OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Offset OK threshold in ns."
::= { me1200PtpConfigClocksSlaveConfigEntry 3 }
me1200PtpConfigClocksSlaveConfigOffsetFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Offset fail threshold in ns."
::= { me1200PtpConfigClocksSlaveConfigEntry 4 }
me1200PtpConfigClocksUnicastSlaveConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksUnicastSlaveConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks unicast slave
configuration."
::= { me1200PtpConfigClocks 7 }
me1200PtpConfigClocksUnicastSlaveConfigEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksUnicastSlaveConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksUnicastSlaveConfigClockId, me1200PtpConfigClocksUnicastSlaveConfigMasterId }
::= { me1200PtpConfigClocksUnicastSlaveConfigTable 1 }
ME1200PtpConfigClocksUnicastSlaveConfigEntry ::= SEQUENCE {
me1200PtpConfigClocksUnicastSlaveConfigClockId Integer32,
me1200PtpConfigClocksUnicastSlaveConfigMasterId Integer32,
me1200PtpConfigClocksUnicastSlaveConfigDuration Unsigned32,
me1200PtpConfigClocksUnicastSlaveConfigIpAddress IpAddress
}
me1200PtpConfigClocksUnicastSlaveConfigClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksUnicastSlaveConfigEntry 1 }
me1200PtpConfigClocksUnicastSlaveConfigMasterId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksUnicastSlaveConfigEntry 2 }
me1200PtpConfigClocksUnicastSlaveConfigDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of seconds for which the Announce/Sync messages are requested."
::= { me1200PtpConfigClocksUnicastSlaveConfigEntry 3 }
me1200PtpConfigClocksUnicastSlaveConfigIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv4 address of requested master clock."
::= { me1200PtpConfigClocksUnicastSlaveConfigEntry 4 }
me1200PtpConfigClocksPortDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpConfigClocksPortDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configurable part of the PTP clocks PortDS."
::= { me1200PtpConfigClocks 8 }
me1200PtpConfigClocksPortDsEntry OBJECT-TYPE
SYNTAX ME1200PtpConfigClocksPortDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpConfigClocksPortDsClockId, me1200PtpConfigClocksPortDsPortId }
::= { me1200PtpConfigClocksPortDsTable 1 }
ME1200PtpConfigClocksPortDsEntry ::= SEQUENCE {
me1200PtpConfigClocksPortDsClockId Integer32,
me1200PtpConfigClocksPortDsPortId ME1200InterfaceIndex,
me1200PtpConfigClocksPortDsEnabled ME1200Unsigned8,
me1200PtpConfigClocksPortDsLogAnnounceInterval ME1200Integer16,
me1200PtpConfigClocksPortDsAnnounceReceiptTimeout ME1200Unsigned8,
me1200PtpConfigClocksPortDsLogSyncInterval ME1200Integer16,
me1200PtpConfigClocksPortDsDelayMechanism ME1200Unsigned8,
me1200PtpConfigClocksPortDsLogMinPdelayReqInterval ME1200Integer16,
me1200PtpConfigClocksPortDsDelayAsymmetry ME1200Integer64,
me1200PtpConfigClocksPortDsIngressLatency ME1200Integer64,
me1200PtpConfigClocksPortDsEgressLatency ME1200Integer64,
me1200PtpConfigClocksPortDsPortInternal TruthValue,
me1200PtpConfigClocksPortDsVersionNumber ME1200Unsigned16,
me1200PtpConfigClocksPortDsMcastAddr ME1200ptpDestAdrType,
me1200PtpConfigClocksPortDsNotSlave TruthValue,
me1200PtpConfigClocksPortDsLocalPriority ME1200Unsigned8
}
me1200PtpConfigClocksPortDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksPortDsEntry 1 }
me1200PtpConfigClocksPortDsPortId OBJECT-TYPE
SYNTAX ME1200InterfaceIndex (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpConfigClocksPortDsEntry 2 }
me1200PtpConfigClocksPortDsEnabled OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines whether port is enabled."
::= { me1200PtpConfigClocksPortDsEntry 3 }
me1200PtpConfigClocksPortDsLogAnnounceInterval OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between announce message transmissions."
::= { me1200PtpConfigClocksPortDsEntry 4 }
me1200PtpConfigClocksPortDsAnnounceReceiptTimeout OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout for receiving announce messages on the port."
::= { me1200PtpConfigClocksPortDsEntry 5 }
me1200PtpConfigClocksPortDsLogSyncInterval OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval for issuing sync meesages in the master."
::= { me1200PtpConfigClocksPortDsEntry 6 }
me1200PtpConfigClocksPortDsDelayMechanism OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay mechanism used for the port."
::= { me1200PtpConfigClocksPortDsEntry 7 }
me1200PtpConfigClocksPortDsLogMinPdelayReqInterval OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of logMinPdelayReqInterval"
::= { me1200PtpConfigClocksPortDsEntry 8 }
me1200PtpConfigClocksPortDsDelayAsymmetry OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value for the communication path asymmetry."
::= { me1200PtpConfigClocksPortDsEntry 9 }
me1200PtpConfigClocksPortDsIngressLatency OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ingress delay for port."
::= { me1200PtpConfigClocksPortDsEntry 10 }
me1200PtpConfigClocksPortDsEgressLatency OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress delay for port."
::= { me1200PtpConfigClocksPortDsEntry 11 }
me1200PtpConfigClocksPortDsPortInternal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines whether port is enabled as an internal interface."
::= { me1200PtpConfigClocksPortDsEntry 12 }
me1200PtpConfigClocksPortDsVersionNumber OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of PTP being used by the port."
::= { me1200PtpConfigClocksPortDsEntry 13 }
me1200PtpConfigClocksPortDsMcastAddr OBJECT-TYPE
SYNTAX ME1200ptpDestAdrType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast address used (default or link local)."
::= { me1200PtpConfigClocksPortDsEntry 14 }
me1200PtpConfigClocksPortDsNotSlave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, the port will not act as a slave."
::= { me1200PtpConfigClocksPortDsEntry 15 }
me1200PtpConfigClocksPortDsLocalPriority OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local priority value."
::= { me1200PtpConfigClocksPortDsEntry 16 }
me1200PtpStatus OBJECT IDENTIFIER
::= { me1200PtpMibObjects 3 }
me1200PtpStatusClocks OBJECT IDENTIFIER
::= { me1200PtpStatus 1 }
me1200PtpStatusClocksDefaultDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksDefaultDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks DefaultDS."
::= { me1200PtpStatusClocks 1 }
me1200PtpStatusClocksDefaultDsEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksDefaultDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksDefaultDsClockId }
::= { me1200PtpStatusClocksDefaultDsTable 1 }
ME1200PtpStatusClocksDefaultDsEntry ::= SEQUENCE {
me1200PtpStatusClocksDefaultDsClockId Integer32,
me1200PtpStatusClocksDefaultDsClockIdentity OCTET STRING,
me1200PtpStatusClocksDefaultDsClockQualityClockClass ME1200Unsigned8,
me1200PtpStatusClocksDefaultDsClockQualityClockAccuracy ME1200Unsigned8,
me1200PtpStatusClocksDefaultDsClockQualityOffsetScaledLogVar ME1200Unsigned16
}
me1200PtpStatusClocksDefaultDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksDefaultDsEntry 1 }
me1200PtpStatusClocksDefaultDsClockIdentity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the unique 8 byte clockIdentify field from the DefaultDS
structure."
::= { me1200PtpStatusClocksDefaultDsEntry 2 }
me1200PtpStatusClocksDefaultDsClockQualityClockClass OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the clock class field of the clock quality structure."
::= { me1200PtpStatusClocksDefaultDsEntry 3 }
me1200PtpStatusClocksDefaultDsClockQualityClockAccuracy OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the clock accuracy field of the clock quality structure."
::= { me1200PtpStatusClocksDefaultDsEntry 4 }
me1200PtpStatusClocksDefaultDsClockQualityOffsetScaledLogVar OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the offsetScaledLogVariance field of the clock quality
structure."
::= { me1200PtpStatusClocksDefaultDsEntry 5 }
me1200PtpStatusClocksCurrentDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksCurrentDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks CurrentDS."
::= { me1200PtpStatusClocks 2 }
me1200PtpStatusClocksCurrentDsEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksCurrentDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksCurrentDsClockId }
::= { me1200PtpStatusClocksCurrentDsTable 1 }
ME1200PtpStatusClocksCurrentDsEntry ::= SEQUENCE {
me1200PtpStatusClocksCurrentDsClockId Integer32,
me1200PtpStatusClocksCurrentDsStepsRemoved ME1200Unsigned16,
me1200PtpStatusClocksCurrentDsOffsetFromMaster ME1200Integer64,
me1200PtpStatusClocksCurrentDsMeanPathDelay ME1200Integer64
}
me1200PtpStatusClocksCurrentDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksCurrentDsEntry 1 }
me1200PtpStatusClocksCurrentDsStepsRemoved OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PTP clocks traversed from the grandmaster to the local
PTP clock."
::= { me1200PtpStatusClocksCurrentDsEntry 2 }
me1200PtpStatusClocksCurrentDsOffsetFromMaster OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time differece in ns from the grandmaster to the local PTP clock."
::= { me1200PtpStatusClocksCurrentDsEntry 3 }
me1200PtpStatusClocksCurrentDsMeanPathDelay OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean path delay from the master to the local slave."
::= { me1200PtpStatusClocksCurrentDsEntry 4 }
me1200PtpStatusClocksParentDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksParentDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks ParentDS."
::= { me1200PtpStatusClocks 3 }
me1200PtpStatusClocksParentDsEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksParentDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksParentDsClockId }
::= { me1200PtpStatusClocksParentDsTable 1 }
ME1200PtpStatusClocksParentDsEntry ::= SEQUENCE {
me1200PtpStatusClocksParentDsClockId Integer32,
me1200PtpStatusClocksParentDsParentPortIdentityClockIdentity OCTET STRING,
me1200PtpStatusClocksParentDsParentPortIdentityPortNumber ME1200Unsigned16,
me1200PtpStatusClocksParentDsParentStats TruthValue,
me1200PtpStatusClocksParentDsObservedParentOffsetScaledLogVar ME1200Unsigned16,
me1200PtpStatusClocksParentDsObservedParentClockPhaseChangeRate Integer32,
me1200PtpStatusClocksParentDsGrmstrIdentity OCTET STRING,
me1200PtpStatusClocksParentDsGrmstrClkQualClockClass ME1200Unsigned8,
me1200PtpStatusClocksParentDsGmstrClkQualClockAccuracy ME1200Unsigned8,
me1200PtpStatusClocksParentDsGmstrClkQualOffsetScaledLogVar ME1200Unsigned16,
me1200PtpStatusClocksParentDsGmstrPriority1 ME1200Unsigned8,
me1200PtpStatusClocksParentDsGmstrPriority2 ME1200Unsigned8
}
me1200PtpStatusClocksParentDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksParentDsEntry 1 }
me1200PtpStatusClocksParentDsParentPortIdentityClockIdentity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the 8 byte unique clock identity of the parent port."
::= { me1200PtpStatusClocksParentDsEntry 2 }
me1200PtpStatusClocksParentDsParentPortIdentityPortNumber OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the port number on the parent associated with the parent clock."
::= { me1200PtpStatusClocksParentDsEntry 3 }
me1200PtpStatusClocksParentDsParentStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Parents stats (always false)."
::= { me1200PtpStatusClocksParentDsEntry 4 }
me1200PtpStatusClocksParentDsObservedParentOffsetScaledLogVar OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is optional and is not computed (as signaled by parentStats
being false)."
::= { me1200PtpStatusClocksParentDsEntry 5 }
me1200PtpStatusClocksParentDsObservedParentClockPhaseChangeRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is optional and is not computed (as signaled by parentStats
being false)."
::= { me1200PtpStatusClocksParentDsEntry 6 }
me1200PtpStatusClocksParentDsGrmstrIdentity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the 8 byte unique clock identity of the grand master clock."
::= { me1200PtpStatusClocksParentDsEntry 7 }
me1200PtpStatusClocksParentDsGrmstrClkQualClockClass OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the clock class of the clock quality structure of the grand
master clock."
::= { me1200PtpStatusClocksParentDsEntry 8 }
me1200PtpStatusClocksParentDsGmstrClkQualClockAccuracy OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the clock accuracy of the clock quality structure of the grand
master clock."
::= { me1200PtpStatusClocksParentDsEntry 9 }
me1200PtpStatusClocksParentDsGmstrClkQualOffsetScaledLogVar OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the offsetScaledLogVariance field of the clock quality
structure of the grand master clock."
::= { me1200PtpStatusClocksParentDsEntry 10 }
me1200PtpStatusClocksParentDsGmstrPriority1 OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Grandmaster Priority1 value."
::= { me1200PtpStatusClocksParentDsEntry 11 }
me1200PtpStatusClocksParentDsGmstrPriority2 OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Grandmaster Priority2 value."
::= { me1200PtpStatusClocksParentDsEntry 12 }
me1200PtpStatusClocksTimePropertiesDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksTimePropertiesDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks TimePropertiesDS."
::= { me1200PtpStatusClocks 4 }
me1200PtpStatusClocksTimePropertiesDsEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksTimePropertiesDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksTimePropertiesDsClockId }
::= { me1200PtpStatusClocksTimePropertiesDsTable 1 }
ME1200PtpStatusClocksTimePropertiesDsEntry ::= SEQUENCE {
me1200PtpStatusClocksTimePropertiesDsClockId Integer32,
me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffset ME1200Integer16,
me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffsetValid TruthValue,
me1200PtpStatusClocksTimePropertiesDsLeap59 TruthValue,
me1200PtpStatusClocksTimePropertiesDsLeap61 TruthValue,
me1200PtpStatusClocksTimePropertiesDsTimeTraceable TruthValue,
me1200PtpStatusClocksTimePropertiesDsFrequencyTraceable TruthValue,
me1200PtpStatusClocksTimePropertiesDsPtpTimescale TruthValue,
me1200PtpStatusClocksTimePropertiesDsTimeSource ME1200Unsigned8
}
me1200PtpStatusClocksTimePropertiesDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksTimePropertiesDsEntry 1 }
me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffset OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current UTC time offset."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 2 }
me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the current UTC time offset value is valid."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 3 }
me1200PtpStatusClocksTimePropertiesDsLeap59 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that the last minute of the day has only 59 seconds."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 4 }
me1200PtpStatusClocksTimePropertiesDsLeap61 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that the last minute of the day has 61 seconds."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 5 }
me1200PtpStatusClocksTimePropertiesDsTimeTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that time is traceable to a primary reference."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 6 }
me1200PtpStatusClocksTimePropertiesDsFrequencyTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that frequency is traceable to a primary reference."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 7 }
me1200PtpStatusClocksTimePropertiesDsPtpTimescale OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether timescale of the grandmaster clock is PTP."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 8 }
me1200PtpStatusClocksTimePropertiesDsTimeSource OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source of time used by the grandmaster clock."
::= { me1200PtpStatusClocksTimePropertiesDsEntry 9 }
me1200PtpStatusClocksSlaveDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksSlaveDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks SlaveDS."
::= { me1200PtpStatusClocks 5 }
me1200PtpStatusClocksSlaveDsEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksSlaveDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksSlaveDsClockId }
::= { me1200PtpStatusClocksSlaveDsTable 1 }
ME1200PtpStatusClocksSlaveDsEntry ::= SEQUENCE {
me1200PtpStatusClocksSlaveDsClockId Integer32,
me1200PtpStatusClocksSlaveDsSlavePort ME1200Unsigned16,
me1200PtpStatusClocksSlaveDsSlaveState ME1200ptpSlaveClockState,
me1200PtpStatusClocksSlaveDsHoldoverStable ME1200Unsigned8,
me1200PtpStatusClocksSlaveDsHoldoverAdj ME1200Integer64
}
me1200PtpStatusClocksSlaveDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksSlaveDsEntry 1 }
me1200PtpStatusClocksSlaveDsSlavePort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0 => no slave port, 1..n => selected slave port."
::= { me1200PtpStatusClocksSlaveDsEntry 2 }
me1200PtpStatusClocksSlaveDsSlaveState OBJECT-TYPE
SYNTAX ME1200ptpSlaveClockState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slaves state."
::= { me1200PtpStatusClocksSlaveDsEntry 3 }
me1200PtpStatusClocksSlaveDsHoldoverStable OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the stabilization period has expired."
::= { me1200PtpStatusClocksSlaveDsEntry 4 }
me1200PtpStatusClocksSlaveDsHoldoverAdj OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculated holdover offset (ppb*10)."
::= { me1200PtpStatusClocksSlaveDsEntry 5 }
me1200PtpStatusClocksUnicastMasterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksUnicastMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks unicast master
table."
::= { me1200PtpStatusClocks 6 }
me1200PtpStatusClocksUnicastMasterEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksUnicastMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksUnicastMasterClockId, me1200PtpStatusClocksUnicastMasterSlaveIp }
::= { me1200PtpStatusClocksUnicastMasterTable 1 }
ME1200PtpStatusClocksUnicastMasterEntry ::= SEQUENCE {
me1200PtpStatusClocksUnicastMasterClockId Integer32,
me1200PtpStatusClocksUnicastMasterSlaveIp IpAddress,
me1200PtpStatusClocksUnicastMasterSlaveMac MacAddress,
me1200PtpStatusClocksUnicastMasterPort ME1200Unsigned16,
me1200PtpStatusClocksUnicastMasterAnnLogMsgPeriod ME1200Integer16,
me1200PtpStatusClocksUnicastMasterAnn TruthValue,
me1200PtpStatusClocksUnicastMasterLogMsgPeriod ME1200Integer16,
me1200PtpStatusClocksUnicastMasterSync TruthValue
}
me1200PtpStatusClocksUnicastMasterClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksUnicastMasterEntry 1 }
me1200PtpStatusClocksUnicastMasterSlaveIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksUnicastMasterEntry 2 }
me1200PtpStatusClocksUnicastMasterSlaveMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksUnicastMasterEntry 3 }
me1200PtpStatusClocksUnicastMasterPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port on the master that slave is connected to."
::= { me1200PtpStatusClocksUnicastMasterEntry 4 }
me1200PtpStatusClocksUnicastMasterAnnLogMsgPeriod OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The granted Announce interval."
::= { me1200PtpStatusClocksUnicastMasterEntry 5 }
me1200PtpStatusClocksUnicastMasterAnn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if sending announce messages."
::= { me1200PtpStatusClocksUnicastMasterEntry 6 }
me1200PtpStatusClocksUnicastMasterLogMsgPeriod OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The granted sync interval."
::= { me1200PtpStatusClocksUnicastMasterEntry 7 }
me1200PtpStatusClocksUnicastMasterSync OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if sending sync messages."
::= { me1200PtpStatusClocksUnicastMasterEntry 8 }
me1200PtpStatusClocksUnicastSlaveTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksUnicastSlaveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks unicast slave
table."
::= { me1200PtpStatusClocks 7 }
me1200PtpStatusClocksUnicastSlaveEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksUnicastSlaveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksUnicastSlaveClockId, me1200PtpStatusClocksUnicastSlaveMasterId }
::= { me1200PtpStatusClocksUnicastSlaveTable 1 }
ME1200PtpStatusClocksUnicastSlaveEntry ::= SEQUENCE {
me1200PtpStatusClocksUnicastSlaveClockId Integer32,
me1200PtpStatusClocksUnicastSlaveMasterId Integer32,
me1200PtpStatusClocksUnicastSlaveMasterIp IpAddress,
me1200PtpStatusClocksUnicastSlaveMasterMac MacAddress,
me1200PtpStatusClocksUnicastSlaveSourcePortIdentityClockIdentity OCTET STRING,
me1200PtpStatusClocksUnicastSlaveSourcePortIdentityPortNumber ME1200Unsigned16,
me1200PtpStatusClocksUnicastSlavePort ME1200Unsigned16,
me1200PtpStatusClocksUnicastSlaveLogMsgPeriod ME1200Integer16,
me1200PtpStatusClocksUnicastSlaveCommState ME1200ptpUcCommState,
me1200PtpStatusClocksUnicastSlaveConfMasterIp IpAddress
}
me1200PtpStatusClocksUnicastSlaveClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksUnicastSlaveEntry 1 }
me1200PtpStatusClocksUnicastSlaveMasterId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksUnicastSlaveEntry 2 }
me1200PtpStatusClocksUnicastSlaveMasterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the IP address of the master."
::= { me1200PtpStatusClocksUnicastSlaveEntry 3 }
me1200PtpStatusClocksUnicastSlaveMasterMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC address of the master."
::= { me1200PtpStatusClocksUnicastSlaveEntry 4 }
me1200PtpStatusClocksUnicastSlaveSourcePortIdentityClockIdentity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the 8 byte unique clock identity of the source port."
::= { me1200PtpStatusClocksUnicastSlaveEntry 5 }
me1200PtpStatusClocksUnicastSlaveSourcePortIdentityPortNumber OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is port number of the port used on the source."
::= { me1200PtpStatusClocksUnicastSlaveEntry 6 }
me1200PtpStatusClocksUnicastSlavePort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port (on the slave) connected to the master."
::= { me1200PtpStatusClocksUnicastSlaveEntry 7 }
me1200PtpStatusClocksUnicastSlaveLogMsgPeriod OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The granted sync interval."
::= { me1200PtpStatusClocksUnicastSlaveEntry 8 }
me1200PtpStatusClocksUnicastSlaveCommState OBJECT-TYPE
SYNTAX ME1200ptpUcCommState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Communication state."
::= { me1200PtpStatusClocksUnicastSlaveEntry 9 }
me1200PtpStatusClocksUnicastSlaveConfMasterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Copy of the destination ip address."
::= { me1200PtpStatusClocksUnicastSlaveEntry 10 }
me1200PtpStatusClocksPortsDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpStatusClocksPortsDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the dynamic (status) part of the PTP clocks PortDS."
::= { me1200PtpStatusClocks 8 }
me1200PtpStatusClocksPortsDsEntry OBJECT-TYPE
SYNTAX ME1200PtpStatusClocksPortsDsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpStatusClocksPortsDsClockId, me1200PtpStatusClocksPortsDsPortId }
::= { me1200PtpStatusClocksPortsDsTable 1 }
ME1200PtpStatusClocksPortsDsEntry ::= SEQUENCE {
me1200PtpStatusClocksPortsDsClockId Integer32,
me1200PtpStatusClocksPortsDsPortId ME1200InterfaceIndex,
me1200PtpStatusClocksPortsDsPortState ME1200ptpClockPortState,
me1200PtpStatusClocksPortsDsLogMinDelayReqInterval ME1200Integer16,
me1200PtpStatusClocksPortsDsPeerMeanPathDelay ME1200Integer64,
me1200PtpStatusClocksPortsDsPeerDelayOk TruthValue
}
me1200PtpStatusClocksPortsDsClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksPortsDsEntry 1 }
me1200PtpStatusClocksPortsDsPortId OBJECT-TYPE
SYNTAX ME1200InterfaceIndex (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksPortsDsEntry 2 }
me1200PtpStatusClocksPortsDsPortState OBJECT-TYPE
SYNTAX ME1200ptpClockPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksPortsDsEntry 3 }
me1200PtpStatusClocksPortsDsLogMinDelayReqInterval OBJECT-TYPE
SYNTAX ME1200Integer16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksPortsDsEntry 4 }
me1200PtpStatusClocksPortsDsPeerMeanPathDelay OBJECT-TYPE
SYNTAX ME1200Integer64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksPortsDsEntry 5 }
me1200PtpStatusClocksPortsDsPeerDelayOk OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"-"
::= { me1200PtpStatusClocksPortsDsEntry 6 }
me1200PtpControl OBJECT IDENTIFIER
::= { me1200PtpMibObjects 4 }
me1200PtpControlClocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200PtpControlClocksEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the PTP clocks control structure."
::= { me1200PtpControl 1 }
me1200PtpControlClocksEntry OBJECT-TYPE
SYNTAX ME1200PtpControlClocksEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clockId index must be a value must be a value from 0 up to the
number of PTP clocks minus one."
INDEX { me1200PtpControlClocksClockId }
::= { me1200PtpControlClocksTable 1 }
ME1200PtpControlClocksEntry ::= SEQUENCE {
me1200PtpControlClocksClockId Integer32,
me1200PtpControlClocksSyncToSystemClock ME1200Unsigned8
}
me1200PtpControlClocksClockId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"-"
::= { me1200PtpControlClocksEntry 1 }
me1200PtpControlClocksSyncToSystemClock OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"-"
::= { me1200PtpControlClocksEntry 2 }
me1200PtpStatistics OBJECT IDENTIFIER
::= { me1200PtpMibObjects 5 }
me1200PtpNotifs OBJECT IDENTIFIER
::= { me1200PtpMibObjects 6 }
me1200PtpNotifsPortStateChange NOTIFICATION-TYPE
OBJECTS {
me1200PtpStatusClocksPortsDsPortId,
me1200PtpStatusClocksPortsDsPortState
}
STATUS current
DESCRIPTION
"An me1200PtpNotifsPortStateChange notification is sent when the Port State changes occurs.
Port State is an enumerated integer value. Description of various possible Port States is:
initializing - In this state a port initializes
its data sets, hardware, and
communication facilities.
faulty - The fault state of the protocol.
disabled - The port shall not place any
messages on its communication path.
listening - The port is waiting for the
announceReceiptTimeout to expire or
to receive an Announce message from
a master.
preMaster - The port shall behave in all respects
as though it were in the MASTER state
except that it shall not place any
messages on its communication path
except for Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up, signaling, or
management messages.
master - The port is behaving as a master port.
passive - The port shall not place any
messages on its communication path
except for Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up, or signaling
messages, or management messages
that are a required response to
another management message
uncalibrated - The local port is preparing to
synchronize to the master port.
slave - The port is synchronizing to the
selected master port.
p2pTransparent - The port is in point to point
transparent state.
e2eTransparent - The port is in end to end
transparent state."
::= { me1200PtpNotifs 1 }
me1200PtpNotifsClockSlaveStateChange NOTIFICATION-TYPE
OBJECTS {
me1200PtpStatusClocksSlaveDsClockId,
me1200PtpStatusClocksSlaveDsSlaveState
}
STATUS current
DESCRIPTION
"An me1200PtpNotifsClockSlaveStateChange notification is sent when the clock slave state changes.
Clock Slave Sate is an enumerated integer value. Description of various possible Port States is:
Freerun - Applies to a slave device that is not locked to
a master. This is the initial state a slave starts out with
when it is not getting any PTP packets from the master or because of
some other input error (erroneous packets, etc).
FreqLocking - The slave device is receiving packets from a
master and is trying to acquire a frequency lock.
PhaseLocking - The slave device is receiving packets from a
master and is trying to acquire a phase lock.
Locked - Locked to the master with respect to
frequency and phase.
Holdover - In this state the slave device is locked to a
master but communication with the master is lost or the
timestamps in the ptp packets are incorrect. But since the
slave was locked to the master, it can run with the same
accuracy for
sometime. The slave can continue to operate in this state for
some time. If communication with the master is not restored for
a while, the device is moved to the FREERUN state.
Invalid - The slave is in Invalid state.
"
::= { me1200PtpNotifs 2 }
me1200PtpNotifsUnicastCommunicationStateChange NOTIFICATION-TYPE
OBJECTS {
me1200PtpStatusClocksUnicastSlaveCommState
}
STATUS current
DESCRIPTION
"An me1200PtpNotifsUnicastCommunicationStateChange notification is sent when the unicast communication
state changes (A unicast slave reports change in the communication state to the configured masters).
Unicast communication state is an enumerated integer value.
Description of various possible states is:
idle - When communication state is idle.
intializing - When communication state is initializing.
connected - When communication state is connected.
selected - When communication state is selected.
synced - When communication state is synced.
"
::= { me1200PtpNotifs 3 }
me1200PtpNotifsUnicastSlaveAppears NOTIFICATION-TYPE
OBJECTS {
me1200PtpStatusClocksUnicastMasterSlaveIp
}
STATUS current
DESCRIPTION
"An me1200PtpNotifsUnicastSlaveAppears notification is sent when a unicast slave appears.
"
::= { me1200PtpNotifs 4 }
me1200PtpNotifsUnicastSlaveDisappears NOTIFICATION-TYPE
OBJECTS {
me1200PtpStatusClocksUnicastMasterSlaveIp
}
STATUS current
DESCRIPTION
"An me1200PtpNotifsUnicastSlaveDisappears notification is sent when a unicast slave disappears.
"
::= { me1200PtpNotifs 5 }
me1200PtpMibConformance OBJECT IDENTIFIER
::= { me1200PtpMib 2 }
me1200PtpMibCompliances OBJECT IDENTIFIER
::= { me1200PtpMibConformance 1 }
me1200PtpMibGroups OBJECT IDENTIFIER
::= { me1200PtpMibConformance 2 }
me1200PtpCapabilitiesGlobalsInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpCapabilitiesGlobalsClockCount }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 1 }
me1200PtpConfigGlobalsExternalClockModeInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigGlobalsExternalClockModeOnePpsMode,
me1200PtpConfigGlobalsExternalClockModeExternalEnable,
me1200PtpConfigGlobalsExternalClockModeAdjustMethod,
me1200PtpConfigGlobalsExternalClockModeClockFrequency }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 2 }
me1200PtpConfigGlobalsSystemTimeSyncModeInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigGlobalsSystemTimeSyncModeMode }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 3 }
me1200PtpConfigClocksDefaultDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksDefaultDsDeviceType,
me1200PtpConfigClocksDefaultDsTwoStepFlag,
me1200PtpConfigClocksDefaultDsPriority1,
me1200PtpConfigClocksDefaultDsPriority2,
me1200PtpConfigClocksDefaultDsOneWay,
me1200PtpConfigClocksDefaultDsDomainNumber,
me1200PtpConfigClocksDefaultDsProtocol,
me1200PtpConfigClocksDefaultDsVlanTagEnable,
me1200PtpConfigClocksDefaultDsVid,
me1200PtpConfigClocksDefaultDsPcp,
me1200PtpConfigClocksDefaultDsMep,
me1200PtpConfigClocksDefaultDsClkDom,
me1200PtpConfigClocksDefaultDsDscp,
me1200PtpConfigClocksDefaultDsProfile,
me1200PtpConfigClocksDefaultDsLocalPriority,
me1200PtpConfigClocksDefaultDsAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 4 }
me1200PtpConfigClocksDefaultDsTableRowEditorInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksDefaultDsTableRowEditorClockId,
me1200PtpConfigClocksDefaultDsTableRowEditorDeviceType,
me1200PtpConfigClocksDefaultDsTableRowEditorTwoStepFlag,
me1200PtpConfigClocksDefaultDsTableRowEditorPriority1,
me1200PtpConfigClocksDefaultDsTableRowEditorPriority2,
me1200PtpConfigClocksDefaultDsTableRowEditorOneWay,
me1200PtpConfigClocksDefaultDsTableRowEditorDomainNumber,
me1200PtpConfigClocksDefaultDsTableRowEditorProtocol,
me1200PtpConfigClocksDefaultDsTableRowEditorVlanTagEnable,
me1200PtpConfigClocksDefaultDsTableRowEditorVid,
me1200PtpConfigClocksDefaultDsTableRowEditorPcp,
me1200PtpConfigClocksDefaultDsTableRowEditorMep,
me1200PtpConfigClocksDefaultDsTableRowEditorClkDom,
me1200PtpConfigClocksDefaultDsTableRowEditorDscp,
me1200PtpConfigClocksDefaultDsTableRowEditorProfile,
me1200PtpConfigClocksDefaultDsTableRowEditorLocalPriority,
me1200PtpConfigClocksDefaultDsTableRowEditorAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 5 }
me1200PtpConfigClocksTimePropertiesDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffset,
me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffsetValid,
me1200PtpConfigClocksTimePropertiesDsLeap59,
me1200PtpConfigClocksTimePropertiesDsLeap61,
me1200PtpConfigClocksTimePropertiesDsTimeTraceable,
me1200PtpConfigClocksTimePropertiesDsFrequencyTraceable,
me1200PtpConfigClocksTimePropertiesDsPtpTimescale,
me1200PtpConfigClocksTimePropertiesDsTimeSource }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 6 }
me1200PtpConfigClocksFilterParametersTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksFilterParametersDelayFilter,
me1200PtpConfigClocksFilterParametersFilterType,
me1200PtpConfigClocksFilterParametersPeriod,
me1200PtpConfigClocksFilterParametersDist }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 7 }
me1200PtpConfigClocksServoParametersTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksServoParametersDisplay,
me1200PtpConfigClocksServoParametersPEnable,
me1200PtpConfigClocksServoParametersIEnable,
me1200PtpConfigClocksServoParametersDEnable,
me1200PtpConfigClocksServoParametersPval,
me1200PtpConfigClocksServoParametersIval,
me1200PtpConfigClocksServoParametersDval,
me1200PtpConfigClocksServoParametersSrvOption,
me1200PtpConfigClocksServoParametersSynceThreshold,
me1200PtpConfigClocksServoParametersSynceAp,
me1200PtpConfigClocksServoParametersHoFilter,
me1200PtpConfigClocksServoParametersStableAdjThreshold }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 8 }
me1200PtpConfigClocksSlaveConfigTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksSlaveConfigStableOffset,
me1200PtpConfigClocksSlaveConfigOffsetOk,
me1200PtpConfigClocksSlaveConfigOffsetFail }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 9 }
me1200PtpConfigClocksUnicastSlaveConfigTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksUnicastSlaveConfigDuration,
me1200PtpConfigClocksUnicastSlaveConfigIpAddress }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 10 }
me1200PtpConfigClocksPortDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpConfigClocksPortDsEnabled,
me1200PtpConfigClocksPortDsLogAnnounceInterval,
me1200PtpConfigClocksPortDsAnnounceReceiptTimeout,
me1200PtpConfigClocksPortDsLogSyncInterval,
me1200PtpConfigClocksPortDsDelayMechanism,
me1200PtpConfigClocksPortDsLogMinPdelayReqInterval,
me1200PtpConfigClocksPortDsDelayAsymmetry,
me1200PtpConfigClocksPortDsIngressLatency,
me1200PtpConfigClocksPortDsEgressLatency,
me1200PtpConfigClocksPortDsPortInternal,
me1200PtpConfigClocksPortDsVersionNumber,
me1200PtpConfigClocksPortDsMcastAddr,
me1200PtpConfigClocksPortDsNotSlave,
me1200PtpConfigClocksPortDsLocalPriority }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 11 }
me1200PtpStatusClocksDefaultDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksDefaultDsClockIdentity,
me1200PtpStatusClocksDefaultDsClockQualityClockClass,
me1200PtpStatusClocksDefaultDsClockQualityClockAccuracy,
me1200PtpStatusClocksDefaultDsClockQualityOffsetScaledLogVar }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 12 }
me1200PtpStatusClocksCurrentDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksCurrentDsStepsRemoved,
me1200PtpStatusClocksCurrentDsOffsetFromMaster,
me1200PtpStatusClocksCurrentDsMeanPathDelay }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 13 }
me1200PtpStatusClocksParentDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksParentDsParentPortIdentityClockIdentity,
me1200PtpStatusClocksParentDsParentPortIdentityPortNumber,
me1200PtpStatusClocksParentDsParentStats,
me1200PtpStatusClocksParentDsObservedParentOffsetScaledLogVar,
me1200PtpStatusClocksParentDsObservedParentClockPhaseChangeRate,
me1200PtpStatusClocksParentDsGrmstrIdentity,
me1200PtpStatusClocksParentDsGrmstrClkQualClockClass,
me1200PtpStatusClocksParentDsGmstrClkQualClockAccuracy,
me1200PtpStatusClocksParentDsGmstrClkQualOffsetScaledLogVar,
me1200PtpStatusClocksParentDsGmstrPriority1,
me1200PtpStatusClocksParentDsGmstrPriority2 }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 14 }
me1200PtpStatusClocksTimePropertiesDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffset,
me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffsetValid,
me1200PtpStatusClocksTimePropertiesDsLeap59,
me1200PtpStatusClocksTimePropertiesDsLeap61,
me1200PtpStatusClocksTimePropertiesDsTimeTraceable,
me1200PtpStatusClocksTimePropertiesDsFrequencyTraceable,
me1200PtpStatusClocksTimePropertiesDsPtpTimescale,
me1200PtpStatusClocksTimePropertiesDsTimeSource }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 15 }
me1200PtpStatusClocksSlaveDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksSlaveDsSlavePort,
me1200PtpStatusClocksSlaveDsSlaveState,
me1200PtpStatusClocksSlaveDsHoldoverStable,
me1200PtpStatusClocksSlaveDsHoldoverAdj }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 16 }
me1200PtpStatusClocksUnicastMasterTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksUnicastMasterSlaveMac,
me1200PtpStatusClocksUnicastMasterPort,
me1200PtpStatusClocksUnicastMasterAnnLogMsgPeriod,
me1200PtpStatusClocksUnicastMasterAnn,
me1200PtpStatusClocksUnicastMasterLogMsgPeriod,
me1200PtpStatusClocksUnicastMasterSync }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 17 }
me1200PtpStatusClocksUnicastSlaveTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksUnicastSlaveMasterIp,
me1200PtpStatusClocksUnicastSlaveMasterMac,
me1200PtpStatusClocksUnicastSlaveSourcePortIdentityClockIdentity,
me1200PtpStatusClocksUnicastSlaveSourcePortIdentityPortNumber,
me1200PtpStatusClocksUnicastSlavePort,
me1200PtpStatusClocksUnicastSlaveLogMsgPeriod,
me1200PtpStatusClocksUnicastSlaveCommState,
me1200PtpStatusClocksUnicastSlaveConfMasterIp }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 18 }
me1200PtpStatusClocksPortsDsTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpStatusClocksPortsDsPortState,
me1200PtpStatusClocksPortsDsLogMinDelayReqInterval,
me1200PtpStatusClocksPortsDsPeerMeanPathDelay,
me1200PtpStatusClocksPortsDsPeerDelayOk }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 19 }
me1200PtpControlClocksTableInfoGroup OBJECT-GROUP
OBJECTS { me1200PtpControlClocksSyncToSystemClock }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200PtpMibGroups 20 }
me1200PtpNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
me1200PtpNotifsPortStateChange,
me1200PtpNotifsClockSlaveStateChange,
me1200PtpNotifsUnicastCommunicationStateChange,
me1200PtpNotifsUnicastSlaveAppears,
me1200PtpNotifsUnicastSlaveDisappears
}
STATUS current
DESCRIPTION
"PTP Nofication events' group."
::= { me1200PtpMibGroups 21 }
me1200PtpMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the implementation."
MODULE -- this module
MANDATORY-GROUPS { me1200PtpCapabilitiesGlobalsInfoGroup,
me1200PtpConfigGlobalsExternalClockModeInfoGroup,
me1200PtpConfigGlobalsSystemTimeSyncModeInfoGroup,
me1200PtpConfigClocksDefaultDsTableInfoGroup,
me1200PtpConfigClocksDefaultDsTableRowEditorInfoGroup,
me1200PtpConfigClocksTimePropertiesDsTableInfoGroup,
me1200PtpConfigClocksFilterParametersTableInfoGroup,
me1200PtpConfigClocksServoParametersTableInfoGroup,
me1200PtpConfigClocksSlaveConfigTableInfoGroup,
me1200PtpConfigClocksUnicastSlaveConfigTableInfoGroup,
me1200PtpConfigClocksPortDsTableInfoGroup,
me1200PtpStatusClocksDefaultDsTableInfoGroup,
me1200PtpStatusClocksCurrentDsTableInfoGroup,
me1200PtpStatusClocksParentDsTableInfoGroup,
me1200PtpStatusClocksTimePropertiesDsTableInfoGroup,
me1200PtpStatusClocksSlaveDsTableInfoGroup,
me1200PtpStatusClocksUnicastMasterTableInfoGroup,
me1200PtpStatusClocksUnicastSlaveTableInfoGroup,
me1200PtpStatusClocksPortsDsTableInfoGroup,
me1200PtpControlClocksTableInfoGroup,
me1200PtpNotifsGroup }
::= { me1200PtpMibCompliances 1 }
END
View Git Blame Copy Permalink