1151 lines
40 KiB
Plaintext
1151 lines
40 KiB
Plaintext
-- ********************************************************************
|
|
-- DSG-IF-MIB.my:
|
|
-- Cisco Cable Wideband MIB file for support of Wideband DOCSIS
|
|
-- on the Cable Modem Termination System (CMTS).
|
|
--
|
|
-- Mar 2005, Jun Yan
|
|
--
|
|
-- Initial Version:
|
|
-- Mar 2005: DSG-InterfaceSpecification-CM-SP-DSG-I03-041124.pdfi
|
|
--
|
|
-- Copyright (c) 2005-2006, 2008-2009 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- ********************************************************************
|
|
--
|
|
|
|
DSG-IF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Integer32,
|
|
Counter32,
|
|
Counter64
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
TruthValue,
|
|
MacAddress,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress,
|
|
InetAddressPrefixLength,
|
|
InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InterfaceIndex,
|
|
ifIndex
|
|
FROM IF-MIB
|
|
clabProjDocsis
|
|
FROM CLAB-DEF-MIB
|
|
Dsid
|
|
FROM DOCS-IF3-MIB;
|
|
|
|
|
|
dsgIfMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201811020000Z"
|
|
ORGANIZATION "Cable Television Laboratories, Inc"
|
|
CONTACT-INFO
|
|
"Postal: Cable Television Laboratories, Inc.
|
|
858 Coal Creek Circle
|
|
Louisville, Colorado 80027
|
|
U.S.A.
|
|
Phone : +1 303-661-9100
|
|
Fax : +1 303-661-9199
|
|
E-mail:"
|
|
DESCRIPTION
|
|
"This is the MIB Module for the DOCSIS Set-top Gateway
|
|
(DSG). The DSG provides a one-way IP datagram transport
|
|
for Out-Of-Band (OOB) messaging to cable set-top clients.
|
|
The one-way IP datagram transport is called a DSG Tunnel.
|
|
A DSG Tunnel carrying either a broadcast, unicast or
|
|
multicast IP datagram stream originating at the DOCSIS
|
|
Set-top Gateway and carrying Out-Of-Band messages intended
|
|
for set-top clients. It is carried over one or more
|
|
downstream DOCSIS channels.
|
|
Multiple DSG tunnels may exist on a single downstream
|
|
DOCSIS channel."
|
|
REVISION "201811020000Z"
|
|
DESCRIPTION
|
|
"This revision is published as part of the CableLabs DOCSIS
|
|
Set-top Gateway (DSG) Interface Specification CM-SP-DSG-I12"
|
|
REVISION "200903230000Z"
|
|
DESCRIPTION
|
|
"Initial revision, published as part of DOCSIS Set-top
|
|
Gateway Specification."
|
|
::= { clabProjDocsis 3 }
|
|
|
|
|
|
dsgIfMIBNotifications OBJECT IDENTIFIER
|
|
::= { dsgIfMIB 0 }
|
|
|
|
dsgIfMIBObjects OBJECT IDENTIFIER
|
|
::= { dsgIfMIB 1 }
|
|
|
|
dsgIfMIBConformance OBJECT IDENTIFIER
|
|
::= { dsgIfMIB 2 }
|
|
|
|
dsgIfClassifier OBJECT IDENTIFIER
|
|
::= { dsgIfMIBObjects 1 }
|
|
|
|
dsgIfTunnel OBJECT IDENTIFIER
|
|
::= { dsgIfMIBObjects 2 }
|
|
|
|
dsgIfTunnelGrpToChannel OBJECT IDENTIFIER
|
|
::= { dsgIfMIBObjects 3 }
|
|
|
|
dsgIfDownstreamChannel OBJECT IDENTIFIER
|
|
::= { dsgIfMIBObjects 4 }
|
|
|
|
dsgIfDCD OBJECT IDENTIFIER
|
|
::= { dsgIfMIBObjects 5 }
|
|
|
|
dsgIfTunnelDsStats OBJECT IDENTIFIER
|
|
::= { dsgIfMIBObjects 6 }
|
|
|
|
-- --------------------------------------------------------------------
|
|
-- The Classifier Table contains objects for classifying packets.
|
|
-- The DSG Agent applies the DSG classifier parameters to the inbound
|
|
-- packets from the DSG server in order to assign the packet to the
|
|
-- appropriate DSG tunnel. The DSG Agent must classify incoming
|
|
-- packets based upon the objects in this table with the exception of
|
|
-- the dsgIfClassDestPortStart and dsgIfClassDestPortEnd objects.
|
|
--
|
|
-- The DSG Agent must also include these encoding in the DCD messages on
|
|
-- the downstream channels to which the classifiers apply.
|
|
--
|
|
-- The DSG classifier is unique per DSG Agent.
|
|
-- ----------------------------------------------------------------------
|
|
|
|
dsgIfClassifierTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfClassifierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Classifier Table contains attributes use to classify
|
|
inbound packets into the tunnel and classifiers for the DSG
|
|
clients, encoding in the DCD messages on the downstream
|
|
channels to which the classifiers apply."
|
|
::= { dsgIfClassifier 1 }
|
|
|
|
dsgIfClassifierEntry OBJECT-TYPE
|
|
SYNTAX DsgIfClassifierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Classifier Table. Rows are created
|
|
by an SNMP SET request setting the value of
|
|
dsgIfClassRowStatus to 'createAndGo'. Each entry is created
|
|
for a tunnel, index by dsgTunnelIndex.
|
|
Rows are deleted by an SNMP SET request setting the value
|
|
of dsgIfClassRowStatus to 'destroy'."
|
|
INDEX {
|
|
dsgIfTunnelIndex,
|
|
dsgIfClassId
|
|
}
|
|
::= { dsgIfClassifierTable 1 }
|
|
|
|
DsgIfClassifierEntry ::= SEQUENCE {
|
|
dsgIfClassId Unsigned32,
|
|
dsgIfClassPriority Unsigned32,
|
|
dsgIfClassSrcIpAddrType InetAddressType,
|
|
dsgIfClassSrcIpAddr InetAddress,
|
|
dsgIfClassSrcIpPrefixLength InetAddressPrefixLength,
|
|
dsgIfClassDestIpAddressType InetAddressType,
|
|
dsgIfClassDestIpAddress InetAddress,
|
|
dsgIfClassDestPortStart InetPortNumber,
|
|
dsgIfClassDestPortEnd InetPortNumber,
|
|
dsgIfClassRowStatus RowStatus,
|
|
dsgIfClassIncludeInDCD TruthValue
|
|
}
|
|
|
|
dsgIfClassId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index that provides a unique classifier (in a DSG
|
|
Agent). This value corresponds to the Classifier ID TLV
|
|
in the DCD message."
|
|
::= { dsgIfClassifierEntry 1 }
|
|
|
|
dsgIfClassPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this classifier.
|
|
Default value 0 indicates lowest priority."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfClassifierEntry 2 }
|
|
|
|
dsgIfClassSrcIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of internet address of dsgIfClassSrcIpAddress."
|
|
DEFVAL { ipv4 }
|
|
::= { dsgIfClassifierEntry 3 }
|
|
|
|
dsgIfClassSrcIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address to be matched for this classifier.
|
|
A value 0 for this object indicates a match of any IP
|
|
address. A value that contains non-zero bits
|
|
outside the range indicated by dsgIfClassSrcIpPrefixLength
|
|
is invalid and should be rejected."
|
|
DEFVAL { ''H }
|
|
::= { dsgIfClassifierEntry 4 }
|
|
|
|
dsgIfClassSrcIpPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the CIDR Prefix carried in
|
|
dsgIfClassSrcIpAddr. In IPv4 addresses, a length of 32 indicates
|
|
a match of a single host address, and a length between
|
|
0 and 32 indicates the use of a CIDR Prefix. A length of
|
|
0 is not allowed. This object is irrelevant and not used
|
|
when dsgIfClassSrcIpAddr value is 0."
|
|
DEFVAL { 32 }
|
|
::= { dsgIfClassifierEntry 5 }
|
|
|
|
dsgIfClassDestIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of internet address of dsgIfClassDestIpAddress."
|
|
DEFVAL { ipv4 }
|
|
::= { dsgIfClassifierEntry 6 }
|
|
|
|
dsgIfClassDestIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address to be matched for this
|
|
classifier."
|
|
DEFVAL { ''H }
|
|
::= { dsgIfClassifierEntry 7 }
|
|
|
|
dsgIfClassDestPortStart OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the inclusive lower bound of the transport-layer
|
|
source port range that is to be matched."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfClassifierEntry 8 }
|
|
|
|
dsgIfClassDestPortEnd OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the inclusive higher bound of the transport-layer
|
|
source port range that is to be matched."
|
|
DEFVAL { 65535 }
|
|
::= { dsgIfClassifierEntry 9 }
|
|
|
|
dsgIfClassRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row. A value of active(1) indicates
|
|
that this classifier is applied to this tunnel.
|
|
A value of notInService(2) indicates that matching of
|
|
the packets are ignored and this classifier parameters
|
|
will not be included in the DCD message."
|
|
::= { dsgIfClassifierEntry 10 }
|
|
|
|
dsgIfClassIncludeInDCD OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not this DSG Classifier will
|
|
be sent in DCD messages for use as a Layer-3 and
|
|
Layer-4 packet filter by the DSG eCM."
|
|
DEFVAL { false }
|
|
::= { dsgIfClassifierEntry 11 }
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- The DSG Tunnel Table contains group(s) of DSG Tunnel Indexes.
|
|
-- Tunnel Entry is mapped to the destination MAC address and each
|
|
-- tunnel is associated to the Qos Service Class Name.
|
|
-- ----------------------------------------------------------------------
|
|
|
|
dsgIfTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG Tunnel Table contains group(s) of tunnel(s).
|
|
Each tunnel is associated to the destination MAC address."
|
|
::= { dsgIfTunnel 1 }
|
|
|
|
dsgIfTunnelEntry OBJECT-TYPE
|
|
SYNTAX DsgIfTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG Tunnel Table. Rows are created by
|
|
an SNMP SET request setting the value of
|
|
dsgIfTunnelRowStatus to 'createAndGo'.
|
|
Each entry associated to a tunnel. A dsgIfTunnelGroupIndex
|
|
represents a group of tunnels that could be associated to
|
|
one or more downstream. Each dsgIfTunnelIndex represents
|
|
a tunnel.
|
|
Rows are deleted by an SNMP SET request setting the
|
|
value of dsgIfTunnelRowStatus to 'destroy'."
|
|
INDEX { dsgIfTunnelIndex }
|
|
::= { dsgIfTunnelTable 1 }
|
|
|
|
DsgIfTunnelEntry ::= SEQUENCE {
|
|
dsgIfTunnelIndex Unsigned32,
|
|
dsgIfTunnelGroupIndex Unsigned32,
|
|
dsgIfTunnelClientIdListIndex Unsigned32,
|
|
dsgIfTunnelMacAddress MacAddress,
|
|
dsgIfTunnelServiceClassName SnmpAdminString,
|
|
dsgIfTunnelRowStatus RowStatus
|
|
}
|
|
|
|
dsgIfTunnelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index into the DSG Tunnel table that represent
|
|
a tunnel."
|
|
::= { dsgIfTunnelEntry 1 }
|
|
|
|
dsgIfTunnelGroupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index represents a group of tunnels that could be
|
|
associated to one or more downstream which mapped
|
|
to dsgIfTunnelGrpIndex."
|
|
::= { dsgIfTunnelEntry 2 }
|
|
|
|
dsgIfTunnelClientIdListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index represents a group of client id(s)
|
|
which mapped to dsgIfClientIdListIndex."
|
|
::= { dsgIfTunnelEntry 3 }
|
|
|
|
dsgIfTunnelMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG tunnel destination MAC address."
|
|
DEFVAL { '000000000000'H }
|
|
::= { dsgIfTunnelEntry 4 }
|
|
|
|
dsgIfTunnelServiceClassName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service Class Name that associated to the
|
|
docsQosServiceClassName(in DOCS-QOS-MIB). Creation of a
|
|
Service Class MUST be configured through the
|
|
docsQosServiceClassTable. Only partial of the
|
|
docsQosServiceClassTable objects are applicable to the
|
|
DSG service class thus some are ignored.
|
|
If the referenced parameter is not present in the
|
|
corresponding DOCSIS QOS Parameter Set, the default
|
|
value of this object is a zero length string."
|
|
REFERENCE "SP-RFIv1.1-I10-030730, Appendix C.2.2.3.4"
|
|
::= { dsgIfTunnelEntry 5 }
|
|
|
|
dsgIfTunnelRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row. A value of notInService(2)
|
|
indicates that this tunnel is disabled and no OOB traffic
|
|
will be forwarded to DSG clients and this tunnel parameters
|
|
will not be included in the DCD message."
|
|
::= { dsgIfTunnelEntry 6 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- The DSG Tunnel Group to Channel Table contains the association of
|
|
-- groups of tunnels to one or more downstream channels. This table
|
|
-- contains the downstream ifIndex, rule priority, ucid range and vendor
|
|
-- parameter identification(2).
|
|
-- ---------------------------------------------------------------------
|
|
|
|
dsgIfTunnelGrpToChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfTunnelGrpToChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG Tunnel Group to Channel Table associates a group
|
|
of tunnels to one or more downstream channel."
|
|
::= { dsgIfTunnelGrpToChannel 1 }
|
|
|
|
dsgIfTunnelGrpToChannelEntry OBJECT-TYPE
|
|
SYNTAX DsgIfTunnelGrpToChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG Tunnel Table. Rows are created by
|
|
an SNMP SET request setting the value of
|
|
dsgIfTunnelGrpRowStatus to 'createAndGo'.
|
|
Rows are deleted by an SNMP SET request setting the
|
|
value of dsgIfTunnelRowStatus to 'destroy'."
|
|
INDEX {
|
|
dsgIfTunnelGrpIndex,
|
|
dsgIfTunnelGrpChannelIndex
|
|
}
|
|
::= { dsgIfTunnelGrpToChannelTable 1 }
|
|
|
|
DsgIfTunnelGrpToChannelEntry ::= SEQUENCE {
|
|
dsgIfTunnelGrpIndex Unsigned32,
|
|
dsgIfTunnelGrpChannelIndex Unsigned32,
|
|
dsgIfTunnelGrpDsIfIndex InterfaceIndex,
|
|
dsgIfTunnelGrpRulePriority Unsigned32,
|
|
dsgIfTunnelGrpUcidList OCTET STRING,
|
|
dsgIfTunnelGrpVendorParamId Unsigned32,
|
|
dsgIfTunnelGrpRowStatus RowStatus
|
|
}
|
|
|
|
dsgIfTunnelGrpIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index into this table."
|
|
::= { dsgIfTunnelGrpToChannelEntry 1 }
|
|
|
|
dsgIfTunnelGrpChannelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index into this table."
|
|
::= { dsgIfTunnelGrpToChannelEntry 2 }
|
|
|
|
dsgIfTunnelGrpDsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream ifIndex that will be associated to
|
|
this group of tunnel(s)."
|
|
::= { dsgIfTunnelGrpToChannelEntry 3 }
|
|
|
|
dsgIfTunnelGrpRulePriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG rule priority determines the order of which
|
|
channel and its associated UCIDs should be applied by
|
|
the DSG client. The default value is 0, which is the lowest
|
|
priority."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfTunnelGrpToChannelEntry 4 }
|
|
|
|
dsgIfTunnelGrpUcidList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of Upstream Channel ID (UCID) values (octets)
|
|
for which the DSG rule applies. A DSG client matches this
|
|
parameter if its UCID value is included in the list. The
|
|
default value of zero length string indicates that this
|
|
DSG Rule applies to all DSG clients."
|
|
DEFVAL { "" }
|
|
::= { dsgIfTunnelGrpToChannelEntry 5 }
|
|
|
|
dsgIfTunnelGrpVendorParamId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of vendor parameter, dsgIfVendorParamId in the
|
|
dsgIfVendorParamTable describing the vendor specific DSG
|
|
parameters. If no associated entry in dsgIfVendorParamTable
|
|
exists, this value is 0."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfTunnelGrpToChannelEntry 6 }
|
|
|
|
dsgIfTunnelGrpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row. The value of notInService(2)
|
|
indicates that this tunnel group is disabled and no OOB
|
|
traffic on all the associated tunnel(s) will be forwarded
|
|
to DSG clients and all parameters will not be included in
|
|
the DCD message."
|
|
::= { dsgIfTunnelGrpToChannelEntry 7 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- The Downstream Table contains the DSG Tunnel Index, the timer
|
|
-- index, specific vendor parameter identification(3) and the
|
|
-- index to the downstream channel list.
|
|
-- ---------------------------------------------------------------------
|
|
|
|
dsgIfDownstreamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfDownstreamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG Downstream Table contains the associated timers,
|
|
vendor specific parameters index and the channel list
|
|
index to a specific downstream."
|
|
::= { dsgIfDownstreamChannel 1 }
|
|
|
|
dsgIfDownstreamEntry OBJECT-TYPE
|
|
SYNTAX DsgIfDownstreamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG Downstream Table.
|
|
An entry in this table exists for each ifEntry with
|
|
an ifType of docsCableDownstream(128)."
|
|
INDEX { ifIndex }
|
|
::= { dsgIfDownstreamTable 1 }
|
|
|
|
DsgIfDownstreamEntry ::= SEQUENCE {
|
|
dsgIfDownTimerIndex Unsigned32,
|
|
dsgIfDownVendorParamId Unsigned32,
|
|
dsgIfDownChannelListIndex Unsigned32,
|
|
dsgIfDownEnableDCD TruthValue
|
|
}
|
|
|
|
dsgIfDownTimerIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index into the timer table, dsgIfTimerTable providing
|
|
the timers used by the DSG client(s).
|
|
The default value 0 indicates there is no associated
|
|
timers that need to be sent in the DCD message."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfDownstreamEntry 1 }
|
|
|
|
dsgIfDownVendorParamId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of vendor parameter, dsgIfVendorParamId in the
|
|
dsgIfVendorParamTable describing the vendor specific DSG
|
|
parameters. If no associated entry in dsgIfVendorParamTable
|
|
exists, this value is 0."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfDownstreamEntry 2 }
|
|
|
|
dsgIfDownChannelListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of a the downstream frequency channel lists,
|
|
dsgIfChannelListIndex in the dsgIfChannelListTable
|
|
providing the list of downstream frequencies that
|
|
contain DSG tunnels."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfDownstreamEntry 3 }
|
|
|
|
dsgIfDownEnableDCD OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to enable or disable DCD messages to be sent on this
|
|
downstream channel. The value is always true(1) for those
|
|
downstreams that contains one or many DSG Tunnels."
|
|
::= { dsgIfDownstreamEntry 4 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- The Client Table contains the objects specifies the matching
|
|
-- parameters for the DSG clients for which the DSG rules applies.
|
|
-- The DSG clients recognized that ids may be originated from different
|
|
-- address space. The same DSG client id may be used by multiple rules.
|
|
-- ---------------------------------------------------------------------
|
|
|
|
dsgIfClientIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfClientIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Client Identification Table contains the client
|
|
identification type and value. It also contains the
|
|
vendor specific parameter identification. There could
|
|
be multiple client ids associated to a tunnel, grouped
|
|
by the dsgIfClientIdListIndex."
|
|
::= { dsgIfDCD 1 }
|
|
|
|
dsgIfClientIdEntry OBJECT-TYPE
|
|
SYNTAX DsgIfClientIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Client Id Table. Rows are created
|
|
by an SNMP SET request setting the value of
|
|
dsgIfClientRowStatus to 'createAndGo'.
|
|
Rows are deleted by an SNMP SET request setting the
|
|
value of dsgIfClientIdRowStatus to 'destroy'."
|
|
INDEX {
|
|
dsgIfClientIdListIndex,
|
|
dsgIfClientIdIndex
|
|
}
|
|
::= { dsgIfClientIdTable 1 }
|
|
|
|
DsgIfClientIdEntry ::= SEQUENCE {
|
|
dsgIfClientIdListIndex Unsigned32,
|
|
dsgIfClientIdIndex Unsigned32,
|
|
dsgIfClientIdType INTEGER,
|
|
dsgIfClientIdValue OCTET STRING,
|
|
dsgIfClientVendorParamId Unsigned32,
|
|
dsgIfClientRowStatus RowStatus
|
|
}
|
|
|
|
dsgIfClientIdListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to this table."
|
|
::= { dsgIfClientIdEntry 1 }
|
|
|
|
dsgIfClientIdIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to each entry of the Client Id."
|
|
::= { dsgIfClientIdEntry 2 }
|
|
|
|
dsgIfClientIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast(1),
|
|
macAddress(2),
|
|
caSystemId(3),
|
|
applicationId(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Client Identification type. A DSG client id of type
|
|
broadcast(1) received by all DSG client(s). A DSG client
|
|
id of type macAddress(2) is received by the DSG client that
|
|
has been assigned with this MAC address where the first 3
|
|
bytes is the Organization Unique Identifier (OUI). A DSG
|
|
client id of type caSystemId(3) is received by the DSG
|
|
client that has been assigned a CA_system_ID. A DSG client
|
|
id of type applicationId(4) is received by the DSG client
|
|
that has been assigned an application ID."
|
|
DEFVAL { broadcast }
|
|
::= { dsgIfClientIdEntry 3 }
|
|
|
|
dsgIfClientIdValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Client Identification Value. The content depends on
|
|
the value of the dsgIfClientIdType. The dsgIfClientIdType
|
|
of a type broadcast(1), the value is empty string. The type
|
|
of macAddress(2), the value represents the well known MAC
|
|
address. The type of caSystemId(3) the value represents the
|
|
CA System Id. The type of applicationId(4) the value
|
|
represents the application Id."
|
|
DEFVAL { '000000000000'H }
|
|
::= { dsgIfClientIdEntry 4 }
|
|
|
|
dsgIfClientVendorParamId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the vendor parameter id, dsgIfVendorParamId
|
|
in the dsgIfVendorParamTable describing the vendor specific
|
|
DSG parameters. If no associated entry in
|
|
dsgIfVendorParamTable exists, this value is 0."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfClientIdEntry 5 }
|
|
|
|
dsgIfClientRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { dsgIfClientIdEntry 6 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- The Vendor Parameter Table contains vendor specific parameters
|
|
-- which allows vendors to send the specific parameters within a
|
|
-- DSG rule or within the DSG Configuration block in a DCD message.
|
|
-- ---------------------------------------------------------------------
|
|
|
|
dsgIfVendorParamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfVendorParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG Vendor Parameter Table allows vendors to send
|
|
specific parameters to the DSG clients within a DSG
|
|
rule or within the DSG Configuration block in a
|
|
DCD message."
|
|
::= { dsgIfDCD 2 }
|
|
|
|
dsgIfVendorParamEntry OBJECT-TYPE
|
|
SYNTAX DsgIfVendorParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG Vendor Parameter Table. Rows are
|
|
created by an SNMP SET request setting the value of
|
|
dsgIfVendorRowStatus to 'createAndGo'. Each entry
|
|
represents one or more vendor??s specific parameters.
|
|
Rows are deleted by an SNMP SET request setting the
|
|
value of dsgIfVendorRowStatus to 'destroy'.
|
|
There are limits to the amount of vendor specific
|
|
information that can be carried in a DSG Rule or
|
|
DSG Configuration block. An SNMP SET request which
|
|
would result in these limits being exceeded should be
|
|
rejected."
|
|
INDEX {
|
|
dsgIfVendorParamId,
|
|
dsgIfVendorIndex
|
|
}
|
|
::= { dsgIfVendorParamTable 1 }
|
|
|
|
DsgIfVendorParamEntry ::= SEQUENCE {
|
|
dsgIfVendorParamId Unsigned32,
|
|
dsgIfVendorIndex Unsigned32,
|
|
dsgIfVendorOUI OCTET STRING,
|
|
dsgIfVendorValue OCTET STRING,
|
|
dsgIfVendorRowStatus RowStatus
|
|
}
|
|
|
|
dsgIfVendorParamId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the table."
|
|
::= { dsgIfVendorParamEntry 1 }
|
|
|
|
dsgIfVendorIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vendor Specific Index."
|
|
::= { dsgIfVendorParamEntry 2 }
|
|
|
|
dsgIfVendorOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (3))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vendor assigned Organization Unique Id (OUI)."
|
|
DEFVAL { '000000'H }
|
|
::= { dsgIfVendorParamEntry 3 }
|
|
|
|
dsgIfVendorValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..50))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vendor Specific Parameter Value."
|
|
DEFVAL { "" }
|
|
::= { dsgIfVendorParamEntry 4 }
|
|
|
|
dsgIfVendorRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { dsgIfVendorParamEntry 5 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- The Channel List Table contains lists of one or multiple
|
|
-- downstream frequencies that are carrying DSG tunnels. The
|
|
-- appropriate DSG Channel List will be included in the DCD
|
|
-- message on the associated downstream channel from the
|
|
-- dsgIfDownstreamTable.
|
|
-- The DSG Client uses this list to determine which downstream
|
|
-- frequencies have DSG Tunnels present.
|
|
-- ---------------------------------------------------------------------
|
|
|
|
dsgIfChannelListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfChannelListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG Channel List Table contains list of one or
|
|
multiple downstream frequencies that are carrying DSG
|
|
tunnel(s)."
|
|
::= { dsgIfDCD 3 }
|
|
|
|
dsgIfChannelListEntry OBJECT-TYPE
|
|
SYNTAX DsgIfChannelListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG Channel List Table. Rows are
|
|
created by an SNMP SET request setting the value of
|
|
dsgIfChannelRowStatus to 'createAndGo'.
|
|
Rows are deleted by an SNMP SET request setting the value
|
|
of dsgIfChannelRowStatus to 'destroy'."
|
|
INDEX {
|
|
dsgIfChannelListIndex,
|
|
dsgIfChannelIndex
|
|
}
|
|
::= { dsgIfChannelListTable 1 }
|
|
|
|
DsgIfChannelListEntry ::= SEQUENCE {
|
|
dsgIfChannelListIndex Unsigned32,
|
|
dsgIfChannelIndex Unsigned32,
|
|
dsgIfChannelDsFreq Integer32,
|
|
dsgIfChannelRowStatus RowStatus
|
|
}
|
|
|
|
dsgIfChannelListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to this table."
|
|
::= { dsgIfChannelListEntry 1 }
|
|
|
|
dsgIfChannelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for each downstream frequency that
|
|
contains the DSG tunnel(s)."
|
|
::= { dsgIfChannelListEntry 2 }
|
|
|
|
dsgIfChannelDsFreq OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DOCSIS downstream center frequency. The receive
|
|
frequency MUST be a multiple of 62500Hz."
|
|
DEFVAL { 0 }
|
|
::= { dsgIfChannelListEntry 3 }
|
|
|
|
dsgIfChannelRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { dsgIfChannelListEntry 4 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- The Timer Table contains 4 timeout timers that are sent to the DSG
|
|
-- clients via the DCD message. These timers are sent to the DSG clients
|
|
-- via the DCD message.
|
|
-- Each downstream mapped to only one set of timers.
|
|
-- ---------------------------------------------------------------------
|
|
|
|
dsgIfTimerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfTimerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSG Timer Table contains timers that are sent to
|
|
the DSG client(s) via the DCD message."
|
|
::= { dsgIfDCD 4 }
|
|
|
|
dsgIfTimerEntry OBJECT-TYPE
|
|
SYNTAX DsgIfTimerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG Timer Table. Rows are created
|
|
by an SNMP SET request setting the value of
|
|
dsgIfTimerRowStatus to 'createAndGo'.
|
|
Rows are deleted by an SNMP SET request setting the value
|
|
of dsgIfTimerRowStatus to 'destroy'."
|
|
INDEX { dsgIfTimerIndex }
|
|
::= { dsgIfTimerTable 1 }
|
|
|
|
DsgIfTimerEntry ::= SEQUENCE {
|
|
dsgIfTimerIndex Unsigned32,
|
|
dsgIfTimerTdsg1 Unsigned32,
|
|
dsgIfTimerTdsg2 Unsigned32,
|
|
dsgIfTimerTdsg3 Unsigned32,
|
|
dsgIfTimerTdsg4 Unsigned32,
|
|
dsgIfTimerRowStatus RowStatus
|
|
}
|
|
|
|
dsgIfTimerIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to this table."
|
|
::= { dsgIfTimerEntry 1 }
|
|
|
|
dsgIfTimerTdsg1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Initialization Timeout. This is the timeout period
|
|
for the DSG packets during initialization of the DSG
|
|
client. The default value is 2 seconds."
|
|
DEFVAL { 2 }
|
|
::= { dsgIfTimerEntry 2 }
|
|
|
|
dsgIfTimerTdsg2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational Timeout. This is the timeout period for
|
|
the DSG packets during normal operation of the DSG client.
|
|
Default value is 10 minutes."
|
|
DEFVAL { 600 }
|
|
::= { dsgIfTimerEntry 3 }
|
|
|
|
dsgIfTimerTdsg3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two-way retry timer. This is the retry timer that
|
|
determines when the DSG client attempts to reconnect
|
|
with the DSG Agent and established two-way connectivity.
|
|
Default value is 5 minutes. The value 0 indicates that
|
|
the client will continuously retry two-way operation."
|
|
DEFVAL { 300 }
|
|
::= { dsgIfTimerEntry 4 }
|
|
|
|
dsgIfTimerTdsg4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One-way retry timer. The retry timer that determines
|
|
when the client attempts to rescan for a DOCSIS
|
|
downstream channel that contains DSG packets after a
|
|
dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout.
|
|
Default value is 30 minutes. The value 0 indicates that
|
|
the client will immediately begin scanning upon
|
|
dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout."
|
|
DEFVAL { 1800 }
|
|
::= { dsgIfTimerEntry 5 }
|
|
|
|
dsgIfTimerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { dsgIfTimerEntry 6 }
|
|
|
|
|
|
-----------------------------------------------------------------------
|
|
--The IF Tunnel Downstream Stats Table is indexed by the DSG Tunnel
|
|
--Index & the ifIndex of the downstream. It contains the packet and byte
|
|
--counters for each tunnel. In addition for 3.0 devices it contains the
|
|
--DSID used to label the tunnel traffic
|
|
-----------------------------------------------------------------------
|
|
|
|
dsgIfTunnelDsStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DsgIfTunnelDsStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IF Tunnel Downstream Stats Table contains the packet and
|
|
byte counters for the tunnel. It also contains the DSID used by
|
|
the tunnel traffic."
|
|
::= { dsgIfTunnelDsStats 1 }
|
|
|
|
dsgIfTunnelDsStatsEntry OBJECT-TYPE
|
|
SYNTAX DsgIfTunnelDsStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DSG IF Tunnel Downstream Stats Table. An entry
|
|
in this table exists for each dsgIfTunnelIndex and an ifIndex of
|
|
docsCableDownstream(128)."
|
|
INDEX {
|
|
dsgIfTunnelIndex,
|
|
ifIndex
|
|
}
|
|
::= { dsgIfTunnelDsStatsTable 1 }
|
|
|
|
DsgIfTunnelDsStatsEntry ::= SEQUENCE {
|
|
dsgIfTunnelDsStatsPkts Counter64,
|
|
dsgIfTunnelDsStatsOctets Counter64,
|
|
dsgIfTunnelDsStatsDsid Dsid
|
|
}
|
|
|
|
dsgIfTunnelDsStatsPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the count of the number of
|
|
packets transmitted in this tunnel"
|
|
::= { dsgIfTunnelDsStatsEntry 1 }
|
|
|
|
dsgIfTunnelDsStatsOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the count of the number of octets
|
|
transmitted in this tunnel"
|
|
::= { dsgIfTunnelDsStatsEntry 2 }
|
|
|
|
dsgIfTunnelDsStatsDsid OBJECT-TYPE
|
|
SYNTAX Dsid (0..1048575)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When operating with Multicast DSID Forwarding (MDF) enabled,
|
|
this object contains the DSID value with which the CMTS labels
|
|
the DSG Tunnel traffic. If no DSID has been created for this
|
|
tunnel then this object returns 0. When MDF is disabled this
|
|
object returns 0. Pre-3.0 DOCSIS devices are not required to
|
|
instantiate this object."
|
|
::= { dsgIfTunnelDsStatsEntry 3 }
|
|
|
|
-- Conformance definitions
|
|
|
|
dsgIfConformance OBJECT IDENTIFIER
|
|
::= { dsgIfMIB 4 }
|
|
|
|
dsgIfGroups OBJECT IDENTIFIER
|
|
::= { dsgIfConformance 1 }
|
|
|
|
dsgIfCompliances OBJECT IDENTIFIER
|
|
::= { dsgIfConformance 2 }
|
|
|
|
|
|
dsgIfBasicCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for DOCSIS Set-top Gateway
|
|
systems."
|
|
MODULE -- this module
|
|
GROUP dsgIfClassifierGroup
|
|
DESCRIPTION
|
|
"Mandatory in DOCSIS Set-top Gateway systems."
|
|
|
|
GROUP dsgIfBaseGroup
|
|
DESCRIPTION
|
|
"Mandatory in DOCSIS Set-top Gateway systems."
|
|
|
|
GROUP dsgIfDCDGroup
|
|
DESCRIPTION
|
|
"Mandatory in DOCSIS Set-top Gateway systems."
|
|
::= { dsgIfCompliances 1 }
|
|
|
|
dsgIfClassifierGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dsgIfClassPriority,
|
|
dsgIfClassSrcIpAddrType,
|
|
dsgIfClassSrcIpAddr,
|
|
dsgIfClassSrcIpPrefixLength,
|
|
dsgIfClassDestIpAddressType,
|
|
dsgIfClassDestIpAddress,
|
|
dsgIfClassDestPortStart,
|
|
dsgIfClassDestPortEnd,
|
|
dsgIfClassRowStatus,
|
|
dsgIfClassIncludeInDCD
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the classifier
|
|
configuration."
|
|
::= { dsgIfGroups 1 }
|
|
|
|
dsgIfBaseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dsgIfTunnelGroupIndex,
|
|
dsgIfTunnelClientIdListIndex,
|
|
dsgIfTunnelMacAddress,
|
|
dsgIfTunnelServiceClassName,
|
|
dsgIfTunnelRowStatus,
|
|
dsgIfTunnelGrpDsIfIndex,
|
|
dsgIfTunnelGrpRulePriority,
|
|
dsgIfTunnelGrpUcidList,
|
|
dsgIfTunnelGrpVendorParamId,
|
|
dsgIfTunnelGrpRowStatus,
|
|
dsgIfDownTimerIndex,
|
|
dsgIfDownVendorParamId,
|
|
dsgIfDownChannelListIndex,
|
|
dsgIfDownEnableDCD
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing DSG Tunnel and Channel
|
|
configuration."
|
|
::= { dsgIfGroups 2 }
|
|
|
|
dsgIfDCDGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dsgIfClientIdType,
|
|
dsgIfClientIdValue,
|
|
dsgIfClientVendorParamId,
|
|
dsgIfClientRowStatus,
|
|
dsgIfVendorOUI,
|
|
dsgIfVendorValue,
|
|
dsgIfVendorRowStatus,
|
|
dsgIfChannelDsFreq,
|
|
dsgIfChannelRowStatus,
|
|
dsgIfTimerTdsg1,
|
|
dsgIfTimerTdsg2,
|
|
dsgIfTimerTdsg3,
|
|
dsgIfTimerTdsg4,
|
|
dsgIfTimerRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing Timers configuration."
|
|
::= { dsgIfGroups 3 }
|
|
|
|
END
|