2370 lines
91 KiB
Plaintext
2370 lines
91 KiB
Plaintext
-- ********************************************************************
|
|
-- CISCO-WIRELESS-HOTSPOT-MIB.my
|
|
-- This MIB helps to manage the Hotspot functionality on the controller
|
|
-- June 2019, Roberto Muccifora
|
|
--
|
|
-- Copyright (c) 2019-2020 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- ********************************************************************
|
|
|
|
CISCO-WIRELESS-HOTSPOT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MacAddress,
|
|
TruthValue,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoWirelessHotspotMIB MODULE-IDENTITY
|
|
LAST-UPDATED "202006180000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems,
|
|
Customer Service
|
|
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central Controllers (CC) that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Cisco Light-weight CAPWAP Access Points.
|
|
|
|
This MIB provides configuration about Hotspot 2.0
|
|
functionality as defined by WiFi Alliance.
|
|
|
|
Particularly there are two main configuration groups
|
|
related to Hotspot:
|
|
|
|
- ANQP server configuration
|
|
- Hotspot icon configuration
|
|
|
|
The ANQP server configuration contains the server
|
|
parameters and the network information that the client
|
|
can query through the GAS/ANQP protocol.
|
|
A given ANQP server is associated to a policy-profile,
|
|
which is then mapped to a WLAN.
|
|
|
|
The Hotspot icon configuration allows to define the
|
|
properties of the icons stored on the CC that can be
|
|
associated to an Online Sing-up (OSU) provider defined
|
|
in the ANQP server.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends them to the controller to which
|
|
it is logically connected.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity is also referred to as 'controller'.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point.
|
|
|
|
Access Network Query Protocol ( ANQP )
|
|
|
|
This is a query and response protocol used by a Mobile
|
|
Node to discover information about the network advertised
|
|
by an Access Point.
|
|
|
|
Generic Advertisement Service ( GAS )
|
|
|
|
It provides the Layer 2 transport between MN and a server
|
|
in the network for the advertisement protocol frames prior
|
|
to authentication.
|
|
|
|
Organization Identifier ( OI )
|
|
|
|
Identifies an operator, manufacturer or organization. It is
|
|
assigned by IEEE.
|
|
|
|
ANQP server
|
|
|
|
This is the server that replies to the ANQP queries, providing
|
|
the requested information. In can be the AP itself, the CC or an
|
|
external entity.
|
|
|
|
Service Set Identifier ( SSID )
|
|
|
|
A service set identifier is a name that identifies a
|
|
particular 802.11 wireless LAN. A client device
|
|
receives broadcast messages from all access points
|
|
within range advertising their SSIDs. The client
|
|
device can then either manually or automatically,
|
|
based on configuration, select the network with which
|
|
to associate. The SSID can be up to 32 characters long.
|
|
|
|
Homogeneous Extended Service Set Identifier ( HESSID )
|
|
|
|
This is a globally unique identifier, in MAC address format,
|
|
used to identify a group of APs connected to the same list
|
|
of Service Providers or other destination network(s).
|
|
|
|
Network Access Identifier ( NAI )
|
|
|
|
In order to provide roaming services, it is necessary
|
|
to have a standardized method for identifying users.
|
|
NAI is actually the user identity submitted by the client
|
|
during network authentication.
|
|
|
|
Hotspot Operator Icon
|
|
|
|
An icon representing a given operator.
|
|
|
|
REFERENCE
|
|
|
|
[1] Wireless LAN Medium Access Control ( MAC ) and
|
|
Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol."
|
|
REVISION "202006180000Z"
|
|
DESCRIPTION
|
|
"Marked cLHotspotRealmEAPAuthTable as deprecated.
|
|
Added cLHotspotEAPAuthTable.
|
|
Added cLHotspotAdviceChargeTable.
|
|
Added cLHotspotAdviceChargePlanInfoTable.
|
|
Added cLHotspotAdviceChargeNAIRealmTable.
|
|
Added cLHotspotRealmEAPAuthTable."
|
|
REVISION "201906200000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 863 }
|
|
|
|
|
|
ciscoWirelessHotspotMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoWirelessHotspotMIB 0 }
|
|
|
|
ciscoWirelessHotspotMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoWirelessHotspotMIB 1 }
|
|
|
|
ciscoWirelessHotspotMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoWirelessHotspotMIB 2 }
|
|
|
|
ciscoWirelessHotspotConfig OBJECT IDENTIFIER
|
|
::= { ciscoWirelessHotspotMIBObjects 1 }
|
|
|
|
-- ********************************************************************
|
|
-- ANQP Server configuration
|
|
-- ********************************************************************
|
|
|
|
cLHotspotAnqpServerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotAnqpServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Hotspot 2.0 ANQP server configuration managed
|
|
by the controller."
|
|
::= { ciscoWirelessHotspotConfig 1 }
|
|
|
|
cLHotspotAnqpServerConfigEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotAnqpServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing Hotspot 2.0 configuration that is
|
|
either sent by the controller to CAPWAP APs for use during
|
|
their operations or used to determine which information should
|
|
be sent to clients to negotiate proper session establishment."
|
|
INDEX { cLHotspotAnqpServerName }
|
|
::= { cLHotspotAnqpServerConfigTable 1 }
|
|
|
|
CLHotspotAnqpServerConfigEntry ::= SEQUENCE {
|
|
cLHotspotAnqpServerName SnmpAdminString,
|
|
cLHotspotAnqpServerRowStatus RowStatus,
|
|
cLHotspotAnqpServerDescription SnmpAdminString,
|
|
cLHotspotAnqpServerInternetEnabled TruthValue,
|
|
cLHotspotAnqpServerNetworkType INTEGER,
|
|
cLHotspotAnqpServerVenueType INTEGER,
|
|
cLHotspotAnqpServerHessid MacAddress,
|
|
cLHotspotGasRequestTimeout Unsigned32,
|
|
cLHotspotAnqpFragmentationThreshold Unsigned32,
|
|
cLHotspotAnqpDomainId Unsigned32,
|
|
cLHotspotAnqpDomainIdEnabled TruthValue,
|
|
cLHotspotAnqpServerIpv4AddressType INTEGER,
|
|
cLHotspotAnqpServerIpv6AddressType INTEGER,
|
|
cLHotspotAnqpOsuSsid SnmpAdminString,
|
|
cLHotspotWanLinkStatus INTEGER,
|
|
cLHotspotWanIsAtCapacity TruthValue,
|
|
cLHotspotWanDownlinkSpeed Unsigned32,
|
|
cLHotspotWanUplinkSpeed Unsigned32,
|
|
cLHotspotWanDownlinkLoad Unsigned32,
|
|
cLHotspotWanUplinkLoad Unsigned32,
|
|
cLHotspotWanLoadMeasDuration Unsigned32,
|
|
cLHotspotTermsConditionsFilename SnmpAdminString,
|
|
cLHotspotTermsConditionsDate SnmpAdminString,
|
|
cLHotspotTermsConditionsTime SnmpAdminString,
|
|
cLHotspotTermsConditionsUrlFilter SnmpAdminString
|
|
}
|
|
|
|
cLHotspotAnqpServerName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the
|
|
ANQP server name that can be used inside
|
|
policy profile to enable Hotspot 2.0.
|
|
The name has to be unique across other
|
|
ANQP server names on the controller."
|
|
::= { cLHotspotAnqpServerConfigEntry 1 }
|
|
|
|
cLHotspotAnqpServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspotAnqpServerConfigEntry 2 }
|
|
|
|
cLHotspotAnqpServerDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a textual description
|
|
of the current ANQP server."
|
|
::= { cLHotspotAnqpServerConfigEntry 3 }
|
|
|
|
cLHotspotAnqpServerInternetEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Internet access policy.
|
|
- A value of 'true' indicates that network will
|
|
provide Internet access.
|
|
- A value of 'false' indicates that network will
|
|
not provide internet access."
|
|
::= { cLHotspotAnqpServerConfigEntry 4 }
|
|
|
|
cLHotspotAnqpServerNetworkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
private(1),
|
|
guestPrivate(2),
|
|
chargeablePublic(3),
|
|
freePublic(4),
|
|
personalDevice(5),
|
|
emergency(6),
|
|
test(7),
|
|
wildcard(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the network type associated with
|
|
this ANQP profile.
|
|
private : Non-authorized users are not
|
|
permitted on this network.
|
|
guestPrivate : Private network but guest accounts
|
|
are available.
|
|
chargeablePublic : The network is accessible to
|
|
anyone, however, access to the
|
|
network requires payment.
|
|
freePublic : The network is accessible to anyone
|
|
and no charges applies for the
|
|
network use.
|
|
personalDevice : The network is accessible only by
|
|
Personal Device
|
|
emergency : Emergency Service network Type
|
|
test : The network is used for test or
|
|
experimental purposes only.
|
|
wildcard : Wildcard network type."
|
|
DEFVAL { private }
|
|
::= { cLHotspotAnqpServerConfigEntry 5 }
|
|
|
|
cLHotspotAnqpServerVenueType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unspecifiedUnspecified(1),
|
|
assemblyUnspecified(2),
|
|
assemblyArena(3),
|
|
assemblyStadium(4),
|
|
assemblyPassengerTerminal(5),
|
|
assemblyAmphitheater(6),
|
|
assemblyAmusementPark(7),
|
|
assemblyPlaceOfWorship(8),
|
|
assemblyConventionCenter(9),
|
|
assemblyLibrary(10),
|
|
assemblyMuseum(11),
|
|
assemblyRestaurant(12),
|
|
assemblyTheater(13),
|
|
assemblyBar(14),
|
|
assemblyCoffeeShop(15),
|
|
assemblyZoo(16),
|
|
assemblyEmergencyCoordCenter(17),
|
|
businessUnspecified(18),
|
|
businessDoctor(19),
|
|
businessBank(20),
|
|
businessFireStation(21),
|
|
businessPoliceStation(22),
|
|
businessPostOffice(23),
|
|
businessProfessionalOffice(24),
|
|
businessRdFacility(25),
|
|
businessAttorney(26),
|
|
educationalUnspecifiedEducational(27),
|
|
educationalPrimarySchool(28),
|
|
educationalSecondarySchool(29),
|
|
educationaluniversity(30),
|
|
industrialUnspecified(31),
|
|
industrialFactory(32),
|
|
institutionalUnspecified(33),
|
|
institutionalHospital(34),
|
|
institutionalLongTermCareFacility(35),
|
|
institutionalAlcoholDrugRehabCenter(36),
|
|
institutionalGroupHome(37),
|
|
institutionalJail(38),
|
|
mercantileUnspecified(39),
|
|
mercantileRetailStore(40),
|
|
mercantileGroceryMarket(41),
|
|
mercantileAutomotiveServiceStation(42),
|
|
mercantileShoppingMall(43),
|
|
mercantileGasStation(44),
|
|
residentialUnspecified(45),
|
|
residentialPrivate(46),
|
|
residentialHotel(47),
|
|
residentialDormitory(48),
|
|
residentialBoardingHouse(49),
|
|
storageUnspecified(50),
|
|
utilityUnspecified(51),
|
|
vehicularUnspecified(52),
|
|
vehicularAutomobileTruck(53),
|
|
vehicularAirplane(54),
|
|
vehicularBus(55),
|
|
vehicularFerry(56),
|
|
vehicularBoat(57),
|
|
vehicularTrain(58),
|
|
vehicularMotorbike(59),
|
|
outdoorUnspecified(60),
|
|
outdoorMuniMesh(61),
|
|
outdoorCityPark(62),
|
|
outdoorRestArea(63),
|
|
outdoorTrafficControl(64),
|
|
outdoorBusStop(65),
|
|
outdoorKiosk(66)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the venue type within
|
|
a particular venue group and type, with respect
|
|
to 802.11u feature.
|
|
The Venue group-Venue Type relationship is per
|
|
the following table:
|
|
Venue Group Venue Type Code Venue Description
|
|
=========== =============== =================
|
|
0 0 Unspecified
|
|
0 1-255 Reserved
|
|
1 0 Unspecified Assembly
|
|
1 1 Arena
|
|
1 2 Stadium
|
|
1 3 Passenger Terminal (e.g.,
|
|
airport, port, bus station, ferry
|
|
terminal, train station)
|
|
1 4 Amphitheater
|
|
1 5 Amusement Park
|
|
1 6 Place of Worship
|
|
1 7 Convention Center
|
|
1 8 Library
|
|
1 9 Museum
|
|
1 10 Restaurant
|
|
1 11 Theater
|
|
1 12 Bar
|
|
1 13 Coffee Shop
|
|
1 14 Zoo or Aquarium
|
|
1 15 Emergency Coordination Center
|
|
1 16-255 Reserved
|
|
2 0 Unspecified Business
|
|
2 1 Doctor or Dentist office
|
|
2 2 Bank
|
|
2 3 Fire Station
|
|
2 4 Police Station
|
|
2 6 Post Office
|
|
2 7 Professional Office
|
|
2 8 Research and Development Facility
|
|
2 9 Attorney Office
|
|
2 10-255 Reserved
|
|
3 0 Unspecified Educational
|
|
3 1 School, Primary
|
|
3 2 School, Secondary
|
|
3 3 University or College
|
|
3 4-255 Reserved
|
|
4 0 Unspecified Factory and Industrial
|
|
4 1 Factory
|
|
4 2-255 Reserved
|
|
5 0 Unspecified Institutional
|
|
5 1 Hospital
|
|
5 2 Long-Term Care Facility (e.g.,
|
|
Nursing home, Hospice, etc.)
|
|
5 3 Alcohol and Drug Re-habilitation
|
|
Center
|
|
5 4 Group Home
|
|
5 5 Prison or Jail
|
|
5 6-255 Reserved
|
|
6 0 Unspecified Mercantile
|
|
6 1 Retail Store
|
|
6 2 Grocery Market
|
|
6 3 Automotive Service Station
|
|
6 4 Shopping Mall
|
|
6 5 Gas Station
|
|
6 6-255 Reserved
|
|
7 0 Unspecified Residential
|
|
7 1 Private Residence
|
|
7 2 Hotel or Motel
|
|
7 3 Dormitory
|
|
7 4 Boarding House
|
|
7 5-255 Reserved
|
|
8 0 Unspecified Storage
|
|
8 1-255 Reserved
|
|
9 0 Unspecified Utility and
|
|
Miscellaneous
|
|
9 1-255 Reserved
|
|
10 0 Unspecified Vehicular
|
|
10 1 Automobile or Truck
|
|
10 2 Airplane
|
|
10 3 Bus
|
|
10 4 Ferry
|
|
10 5 Ship or Boat
|
|
10 6 Train
|
|
10 7 Motor Bike
|
|
10 7-255 Reserved
|
|
11 0 Unspecified Outdoor
|
|
11 1 Muni-mesh Network
|
|
11 2 City Park
|
|
11 3 Rest Area
|
|
11 4 Traffic Control
|
|
11 5 Bus Stop
|
|
11 6 Kiosk
|
|
11 7-255 Reserved"
|
|
DEFVAL { unspecifiedUnspecified }
|
|
::= { cLHotspotAnqpServerConfigEntry 6 }
|
|
|
|
cLHotspotAnqpServerHessid OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the HESSID for this ANQP server."
|
|
::= { cLHotspotAnqpServerConfigEntry 7 }
|
|
|
|
cLHotspotGasRequestTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (100..10000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the timeout in milliseconds
|
|
of a GAS request."
|
|
DEFVAL { 1000 }
|
|
::= { cLHotspotAnqpServerConfigEntry 8 }
|
|
|
|
cLHotspotAnqpFragmentationThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (16..1294)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the threshold in bytes
|
|
for the ANQP reply fragmentation. Any ANQP
|
|
replies bigger than this value will be sent
|
|
to the client in one or more GAS comeback
|
|
replies."
|
|
DEFVAL { 1294 }
|
|
::= { cLHotspotAnqpServerConfigEntry 9 }
|
|
|
|
cLHotspotAnqpDomainId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the ANQP domain ID."
|
|
::= { cLHotspotAnqpServerConfigEntry 10 }
|
|
|
|
cLHotspotAnqpDomainIdEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if the ANQP domain ID
|
|
should be included in the Hotspot 2.0 information
|
|
element."
|
|
::= { cLHotspotAnqpServerConfigEntry 11 }
|
|
|
|
cLHotspotAnqpServerIpv4AddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAvailable(1),
|
|
public(2),
|
|
portRestricted(3),
|
|
singleNatedPrivate(4),
|
|
doubleNatedPrivate(5),
|
|
portRestrictedSingleNatedPrivate(6),
|
|
portRestrictedDoubleNatedPrivate(7),
|
|
notKnown(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPv4 address availability.
|
|
notAvailable : Address type not
|
|
available.
|
|
public : Public IPv4 address
|
|
available.
|
|
portRestricted : Port-restricted IPv4
|
|
address available.
|
|
singleNatedPrivate : Single NATed private
|
|
IPv4 address available.
|
|
doubleNatedPrivate : Double NATed private
|
|
IPv4 address available.
|
|
portRestrictedSingleNatedPrivate : Port-restricted IPv4
|
|
address and single
|
|
NATed IPv4 address
|
|
available.
|
|
portRestrictedDoubleNatedPrivate : Port-restricted IPv4
|
|
address and double
|
|
NATed IPv4 address
|
|
available.
|
|
notKnown : Availability of the
|
|
address type is not
|
|
known."
|
|
DEFVAL { notAvailable }
|
|
::= { cLHotspotAnqpServerConfigEntry 12 }
|
|
|
|
cLHotspotAnqpServerIpv6AddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAvailable(1),
|
|
available(2),
|
|
notKnown(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPv6 address availability.
|
|
notAvailable : Address type not available.
|
|
available : Address type available.
|
|
notKnown : Availability of the address type not known."
|
|
DEFVAL { notAvailable }
|
|
::= { cLHotspotAnqpServerConfigEntry 13 }
|
|
|
|
cLHotspotAnqpOsuSsid OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the non broadcasted SSID from the AP.
|
|
The SSID is present in ANQP response message and this WLAN
|
|
is used for Online Signup of Hotspot 2.0 devices."
|
|
::= { cLHotspotAnqpServerConfigEntry 14 }
|
|
|
|
cLHotspotWanLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notConfigured(0),
|
|
up(1),
|
|
down(2),
|
|
testState(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of the link with respect to
|
|
WAN metrics configuration.
|
|
notConfigured : Not configured.
|
|
up : WAN link is up.
|
|
down : WAN link is down.
|
|
testState : WAN link is in test state."
|
|
::= { cLHotspotAnqpServerConfigEntry 15 }
|
|
|
|
cLHotspotWanIsAtCapacity OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if WAN link is currently operating at its
|
|
maximum capacity."
|
|
::= { cLHotspotAnqpServerConfigEntry 16 }
|
|
|
|
cLHotspotWanDownlinkSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the down link speed of WAN Backhaul
|
|
in kbps."
|
|
::= { cLHotspotAnqpServerConfigEntry 17 }
|
|
|
|
cLHotspotWanUplinkSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the up link speed of WAN Backhaul
|
|
in kbps."
|
|
::= { cLHotspotAnqpServerConfigEntry 18 }
|
|
|
|
cLHotspotWanDownlinkLoad OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the down link load of WAN Backhaul. It
|
|
represents the percentage loading of the down link WAN
|
|
connection, scaled linearly with 255 representing 100%, as
|
|
measured over an interval, the duration of which is reported in
|
|
cLHotspotWanLoadMeasDuration."
|
|
::= { cLHotspotAnqpServerConfigEntry 19 }
|
|
|
|
cLHotspotWanUplinkLoad OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the up link load of WAN Backhaul. It
|
|
represents the percentage loading of the up link WAN
|
|
connection, scaled linearly with 255 representing 100%, as
|
|
measured over an interval, the duration of which is reported in
|
|
cLHotspotWanLoadMeasDuration."
|
|
::= { cLHotspotAnqpServerConfigEntry 20 }
|
|
|
|
cLHotspotWanLoadMeasDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "tenths of seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the load measurement duration of
|
|
WAN Backhaul."
|
|
::= { cLHotspotAnqpServerConfigEntry 21 }
|
|
|
|
cLHotspotTermsConditionsFilename OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..220))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the file name used for
|
|
terms and conditions acceptance."
|
|
::= { cLHotspotAnqpServerConfigEntry 22 }
|
|
|
|
cLHotspotTermsConditionsDate OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..10))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the date portion of timestamp
|
|
when AAA server processed terms and conditions acceptance.
|
|
It should have the YYYY-MM-DD format."
|
|
::= { cLHotspotAnqpServerConfigEntry 23 }
|
|
|
|
cLHotspotTermsConditionsTime OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time portion of timestamp
|
|
when AAA server processed terms and conditions acceptance.
|
|
It should have the hh-mm-ss format."
|
|
::= { cLHotspotAnqpServerConfigEntry 24 }
|
|
|
|
cLHotspotTermsConditionsUrlFilter OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..100))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the URL filter list name used for
|
|
terms and conditions acceptance."
|
|
::= { cLHotspotAnqpServerConfigEntry 25 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- Roaming OI table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotRoamingOITable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotRoamingOIEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of roaming consortium Organization Identifiers (OIs)
|
|
that will be either broadcasted to clients using
|
|
beacons or retrieved using ANQP requests. Up to 255
|
|
non-beacon OIs can be configured. Up to 3 beacons OIs
|
|
can be added."
|
|
::= { ciscoWirelessHotspotConfig 2 }
|
|
|
|
cLHotspotRoamingOIEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotRoamingOIEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing a given roaming
|
|
consortium unique OI which can be flagged as being
|
|
either broadcasted in beacon or not."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotRoamingOI
|
|
}
|
|
::= { cLHotspotRoamingOITable 1 }
|
|
|
|
CLHotspotRoamingOIEntry ::= SEQUENCE {
|
|
cLHotspotRoamingOI OCTET STRING,
|
|
cLHotspotRoamingOIRowStatus RowStatus,
|
|
cLHotspotRoamingOIIsBeacon TruthValue
|
|
}
|
|
|
|
cLHotspotRoamingOI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6 | 10))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the public OI assigned by the IEEE.
|
|
Each OI identifies a roaming consortium
|
|
(group of SSPs with inter-SSP roaming agreement)
|
|
or a single SSP. WLAN can have up to 255 OUIs defined.
|
|
Each OUI defined should be unique.
|
|
For example the value for Cisco is 004096."
|
|
::= { cLHotspotRoamingOIEntry 1 }
|
|
|
|
cLHotspotRoamingOIRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspotRoamingOIEntry 2 }
|
|
|
|
cLHotspotRoamingOIIsBeacon OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a method
|
|
to configure a particular
|
|
OI as one of the beacon OIs.
|
|
Beacon can carry at most 3 OIs.
|
|
User should be able to select 0-3 OIs
|
|
- A value of 'true' indicates that this OI would
|
|
be carried in beacon.
|
|
- A value of 'false' indicates that this OI
|
|
is not a beacon OI."
|
|
DEFVAL { false }
|
|
::= { cLHotspotRoamingOIEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- Domain table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotDomainNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotDomainNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of domain names that can be queried by
|
|
the client using ANQP."
|
|
::= { ciscoWirelessHotspotConfig 3 }
|
|
|
|
cLHotspotDomainNameEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotDomainNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing a given domain
|
|
name. Name format should be compliant with the
|
|
preferred name syntax defined in RFC 1035."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotDomainName
|
|
}
|
|
::= { cLHotspotDomainNameTable 1 }
|
|
|
|
CLHotspotDomainNameEntry ::= SEQUENCE {
|
|
cLHotspotDomainName SnmpAdminString,
|
|
cLHotspotDomainNameRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotDomainName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of a domain"
|
|
::= { cLHotspotDomainNameEntry 1 }
|
|
|
|
cLHotspotDomainNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspotDomainNameEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- 3gpp table
|
|
-- ********************************************************************
|
|
|
|
cLHotspot3gppTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspot3gppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of 3gpp cellular information
|
|
to assist a 3gpp mobile client in selecting an AP
|
|
to access 3gpp network."
|
|
::= { ciscoWirelessHotspotConfig 4 }
|
|
|
|
cLHotspot3gppEntry OBJECT-TYPE
|
|
SYNTAX CLHotspot3gppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing a tuple of mobile
|
|
country code (MCC) and mobile network code (MNC). Up
|
|
to 32 entries can be defined for a given ANQP server."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspot3gppNetworkCode,
|
|
cLHotspot3gppCountryCode
|
|
}
|
|
::= { cLHotspot3gppTable 1 }
|
|
|
|
CLHotspot3gppEntry ::= SEQUENCE {
|
|
cLHotspot3gppNetworkCode OCTET STRING,
|
|
cLHotspot3gppCountryCode OCTET STRING,
|
|
cLHotspot3gppRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspot3gppNetworkCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2 | 3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the mobile network code consisting
|
|
in a two or three decimal digits value."
|
|
::= { cLHotspot3gppEntry 1 }
|
|
|
|
cLHotspot3gppCountryCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the mobile country code consisting
|
|
in a three decimal digits value."
|
|
::= { cLHotspot3gppEntry 2 }
|
|
|
|
cLHotspot3gppRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspot3gppEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Realm Table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotRealmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of the NAI realm details.
|
|
Each realm entry should be unique as it represents the user
|
|
identity submitted by the client during authentication."
|
|
::= { ciscoWirelessHotspotConfig 5 }
|
|
|
|
cLHotspotRealmEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry specifying a single realm configuration.
|
|
Up to 32 realms can be configured."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotRealmName
|
|
}
|
|
::= { cLHotspotRealmTable 1 }
|
|
|
|
CLHotspotRealmEntry ::= SEQUENCE {
|
|
cLHotspotRealmName SnmpAdminString,
|
|
cLHotspotRealmRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotRealmName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the NAI name.
|
|
In order to provide roaming services,
|
|
it is necessary to have a standardized method for
|
|
identifying users. NAI represents the SSP identities
|
|
supported during network authentication.
|
|
In roaming, the purpose of the NAI is to provide information
|
|
to the user as well as to assist in the routing of the
|
|
authentication request."
|
|
::= { cLHotspotRealmEntry 1 }
|
|
|
|
cLHotspotRealmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspotRealmEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Realm EAP Table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotRealmEAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotRealmEAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of EAP methods configured for a given NAI realm."
|
|
::= { ciscoWirelessHotspotConfig 6 }
|
|
|
|
cLHotspotRealmEAPEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotRealmEAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing a single EAP method realm configuration."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotRealmName,
|
|
cLHotspotRealmEAPMethod
|
|
}
|
|
::= { cLHotspotRealmEAPTable 1 }
|
|
|
|
CLHotspotRealmEAPEntry ::= SEQUENCE {
|
|
cLHotspotRealmEAPMethod INTEGER,
|
|
cLHotspotRealmEAPRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotRealmEAPMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eapTLS(1),
|
|
eapLEAP(2),
|
|
eapSIM(3),
|
|
eapTTLS(4),
|
|
eapAKA(5),
|
|
eapPEAP(6),
|
|
eapFAST(7)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a single EAP method allowed
|
|
for a authentication to a given NAI realm.
|
|
eapTLS : EAP Transport Layer Security.
|
|
eapLEAP : EAP Lightweight Extensible Authentication
|
|
Protocol.
|
|
eapSIM : EAP for GSM Subscriber Identity Modules.
|
|
eapTTLS : EAP Tunneled Transport Layer Security.
|
|
eapAKA : EAP for UMTS Authentication and Key Agreement.
|
|
eapPEAP : EAP Protected Extensible Authentication
|
|
Protocol.
|
|
eapFAST : EAP Flexible Authentication via Secure
|
|
Tunneling."
|
|
::= { cLHotspotRealmEAPEntry 1 }
|
|
|
|
cLHotspotRealmEAPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspotRealmEAPEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Realm EAP Auth Table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotRealmEAPAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotRealmEAPAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of authentication EAP method details for a given NAI
|
|
realm.
|
|
This table is deprecated and replaced by cLHotspotEAPAuthTable."
|
|
::= { ciscoWirelessHotspotConfig 7 }
|
|
|
|
cLHotspotRealmEAPAuthEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotRealmEAPAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry representing a single EAP method configuration
|
|
details.
|
|
cLHotspotRealmEAPAuthEntry object is superseded by cLHotspotEAPAuthTable."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotRealmName,
|
|
cLHotspotRealmEAPMethod,
|
|
cLHotspotRealmEAPAuthMethod
|
|
}
|
|
::= { cLHotspotRealmEAPAuthTable 1 }
|
|
|
|
CLHotspotRealmEAPAuthEntry ::= SEQUENCE {
|
|
cLHotspotRealmEAPAuthMethod INTEGER,
|
|
cLHotspotRealmEAPAuthRowStatus RowStatus,
|
|
cLHotspotRealmEAPAuthInnerAuthEAPType INTEGER,
|
|
cLHotspotRealmEAPAuthNonInnerAuthEAPType INTEGER,
|
|
cLHotspotRealmEAPAuthCredentialType INTEGER,
|
|
cLHotspotRealmEAPAuthTunneledEAPCredentialType INTEGER
|
|
}
|
|
|
|
cLHotspotRealmEAPAuthMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
innerAuthNonEap(1),
|
|
innerAuthEap(2),
|
|
credential(3),
|
|
tunneledEapCredential(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the Extensible Authentication Protocol
|
|
(EAP) authentication method defined.
|
|
innerAuthNonEap : Uses non-EAP inner authentication
|
|
type.
|
|
innerAuthEap : Uses EAP inner authentication type.
|
|
credential : Uses credential authentication.
|
|
tunneledEapCredential : Uses tunneled EAP credential
|
|
authentication.
|
|
cLHotspotRealmEAPAuthMethod object is superseded by cLHotspotEAPAuthTable."
|
|
DEFVAL { innerAuthNonEap }
|
|
::= { cLHotspotRealmEAPAuthEntry 1 }
|
|
|
|
cLHotspotRealmEAPAuthRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active.
|
|
cLHotspotRealmEAPAuthRowStatus object is superseded by cLHotspotEAPAuthTable."
|
|
::= { cLHotspotRealmEAPAuthEntry 2 }
|
|
|
|
cLHotspotRealmEAPAuthInnerAuthEAPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(1),
|
|
eapTLS(2),
|
|
eapLEAP(3),
|
|
eapSIM(4),
|
|
eapTTLS(5),
|
|
eapAKA(6),
|
|
eapPEAP(7),
|
|
eapFAST(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the authentication parameters defined
|
|
in the case inner EAP authentication is chosen. It will be
|
|
set to reserved if another type of EAP authentication is
|
|
defined.
|
|
cLHotspotRealmEAPAuthInnerAuthEAPType object is superseded by cLHotspotEAPAuthTable."
|
|
DEFVAL { reserved }
|
|
::= { cLHotspotRealmEAPAuthEntry 3 }
|
|
|
|
cLHotspotRealmEAPAuthNonInnerAuthEAPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(1),
|
|
pap(2),
|
|
chap(3),
|
|
mschap(4),
|
|
mschapV2(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the authentication parameters defined
|
|
in the case non inner EAP authentication is chosen. It will be
|
|
set to reserved if another type of EAP authentication is
|
|
defined.
|
|
cLHotspotRealmEAPAuthNonInnerAuthEAPType object is superseded by cLHotspotEAPAuthTable."
|
|
DEFVAL { reserved }
|
|
::= { cLHotspotRealmEAPAuthEntry 4 }
|
|
|
|
cLHotspotRealmEAPAuthCredentialType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(1),
|
|
sim(2),
|
|
usim(3),
|
|
nfc(4),
|
|
hwToken(5),
|
|
softoken(6),
|
|
certificate(7),
|
|
usernamePassword(8),
|
|
none(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the authentication parameters defined
|
|
in the case credential authentication is chosen. It will be set
|
|
to reserved if another type of EAP authentication is defined.
|
|
cLHotspotRealmEAPAuthCredentialType object is superseded by cLHotspotEAPAuthTable."
|
|
DEFVAL { reserved }
|
|
::= { cLHotspotRealmEAPAuthEntry 5 }
|
|
|
|
cLHotspotRealmEAPAuthTunneledEAPCredentialType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(1),
|
|
sim(2),
|
|
usim(3),
|
|
nfc(4),
|
|
hwToken(5),
|
|
softoken(6),
|
|
certificate(7),
|
|
usernamePassword(8),
|
|
anonymous(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the authentication parameters defined
|
|
in the case tunneled EAP credential authentication is chosen.
|
|
It will be set to reserved if another type of EAP authentication
|
|
is defined.
|
|
cLHotspotRealmEAPAuthTunneledEAPCredentialType object is superseded by cLHotspotEAPAuthTable."
|
|
DEFVAL { reserved }
|
|
::= { cLHotspotRealmEAPAuthEntry 6 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Connection capability table
|
|
-- ***********************************s*********************************
|
|
|
|
cLHotspotConnectionCapabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotConnectionCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of connection capabilities in the Hotspot WLAN for
|
|
the most commonly used communication protocols and ports."
|
|
::= { ciscoWirelessHotspotConfig 8 }
|
|
|
|
cLHotspotConnectionCapabilityEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotConnectionCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the Port-Protocol
|
|
configuration advertised by the ANQP server.
|
|
An ANQP server can have up to 255 protocol port
|
|
configurations defined."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotConnectionCapabilityProtocol,
|
|
cLHotspotConnectionCapabilityPort
|
|
}
|
|
::= { cLHotspotConnectionCapabilityTable 1 }
|
|
|
|
CLHotspotConnectionCapabilityEntry ::= SEQUENCE {
|
|
cLHotspotConnectionCapabilityProtocol Unsigned32,
|
|
cLHotspotConnectionCapabilityPort Unsigned32,
|
|
cLHotspotConnectionCapabilityRowStatus RowStatus,
|
|
cLHotspotConnectionCapabilityStatus INTEGER
|
|
}
|
|
|
|
cLHotspotConnectionCapabilityProtocol OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP protocol number."
|
|
::= { cLHotspotConnectionCapabilityEntry 1 }
|
|
|
|
cLHotspotConnectionCapabilityPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the port number."
|
|
::= { cLHotspotConnectionCapabilityEntry 2 }
|
|
|
|
cLHotspotConnectionCapabilityRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status
|
|
for creation and deletion of a particular
|
|
connection capability entry in the table."
|
|
::= { cLHotspotConnectionCapabilityEntry 3 }
|
|
|
|
cLHotspotConnectionCapabilityStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
closed(1),
|
|
open(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the protocol status.
|
|
closed : The IP protocol or the associated port number
|
|
is not open for communication.
|
|
open : The IP protocol or the associated port number
|
|
is open for communication.
|
|
unknown : The IP protocol or the associated port number
|
|
may or may not be open for communication."
|
|
::= { cLHotspotConnectionCapabilityEntry 4 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Operator name table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotOperatorNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotOperatorNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Operator names for a particular WLAN in a
|
|
controller.
|
|
Rows are added or deleted by explicit
|
|
management actions initiated by the user from a
|
|
network management station through the
|
|
cLHotspotOperatorNameRowStatus object"
|
|
::= { ciscoWirelessHotspotConfig 9 }
|
|
|
|
cLHotspotOperatorNameEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotOperatorNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the operator
|
|
name configuration for a particular WLAN.
|
|
A WLAN can have up to 32 operators defined."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotOperatorNameLanguage
|
|
}
|
|
::= { cLHotspotOperatorNameTable 1 }
|
|
|
|
CLHotspotOperatorNameEntry ::= SEQUENCE {
|
|
cLHotspotOperatorNameLanguage SnmpAdminString,
|
|
cLHotspotOperatorNameRowStatus RowStatus,
|
|
cLHotspotOperatorName SnmpAdminString
|
|
}
|
|
|
|
cLHotspotOperatorNameLanguage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (2..3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the language ISO-14962-1997 encoded
|
|
defined for this operator."
|
|
::= { cLHotspotOperatorNameEntry 1 }
|
|
|
|
cLHotspotOperatorNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status
|
|
for creation and deletion of a particular
|
|
Operator entry in the table."
|
|
::= { cLHotspotOperatorNameEntry 2 }
|
|
|
|
cLHotspotOperatorName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..252))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name for this operator."
|
|
::= { cLHotspotOperatorNameEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * OSU provider table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotOsuProviderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotOsuProviderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of service provider configuration of
|
|
the Online-Signup (OSU) functionality of Hotspot 2.0."
|
|
::= { ciscoWirelessHotspotConfig 10 }
|
|
|
|
cLHotspotOsuProviderEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotOsuProviderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the OSU-service provider
|
|
configuration for Hotspot 2.0 feature."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotOsuProviderName
|
|
}
|
|
::= { cLHotspotOsuProviderTable 1 }
|
|
|
|
CLHotspotOsuProviderEntry ::= SEQUENCE {
|
|
cLHotspotOsuProviderName SnmpAdminString,
|
|
cLHotspotOsuProviderRowStatus RowStatus,
|
|
cLHotspotOsuProviderServerUri SnmpAdminString,
|
|
cLHotspotOsuProviderNai SnmpAdminString,
|
|
cLHotspotOsuProviderPrimaryMethod INTEGER,
|
|
cLHotspotOsuProviderSecondaryMethod INTEGER
|
|
}
|
|
|
|
cLHotspotOsuProviderName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service Provider name
|
|
for this particular OSU provider."
|
|
::= { cLHotspotOsuProviderEntry 1 }
|
|
|
|
cLHotspotOsuProviderRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status
|
|
for creation and deletion of a particular
|
|
OSU provider entry in the table."
|
|
::= { cLHotspotOsuProviderEntry 2 }
|
|
|
|
cLHotspotOsuProviderServerUri OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the URI for this particular OSU
|
|
provider."
|
|
::= { cLHotspotOsuProviderEntry 3 }
|
|
|
|
cLHotspotOsuProviderNai OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the NAI for this particular OSU provider.
|
|
This is an optional parameter."
|
|
::= { cLHotspotOsuProviderEntry 4 }
|
|
|
|
cLHotspotOsuProviderPrimaryMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
omaDm(2),
|
|
soapXmlSpp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the primary server method for this
|
|
particular OSU provider, This is an optional parameter.
|
|
none : No primary method.
|
|
omaDm : Open Mobile Alliance's Device Management.
|
|
soapXmlSpp : Simple Object Access Protocol (SOAP) with XML
|
|
encoding Subscription Provisioning Protocol
|
|
(SPP)."
|
|
::= { cLHotspotOsuProviderEntry 5 }
|
|
|
|
cLHotspotOsuProviderSecondaryMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
omaDm(2),
|
|
soapXmlSpp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the secondary server method for this
|
|
particular OSU provider, This is an optional parameter.
|
|
none : No secondary method.
|
|
omaDm : Open Mobile Alliance's Device Management.
|
|
soapXmlSpp : Simple Object Access Protocol (SOAP) with XML
|
|
encoding Subscription Provisioning Protocol
|
|
(SPP)."
|
|
::= { cLHotspotOsuProviderEntry 6 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * OSU provider friendly name table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotOsuProviderFriendlyNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotOsuProviderFriendlyNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of service provider friendly name
|
|
configuration of the Online-Signup (OSU) functionality of
|
|
Hotspot 2.0."
|
|
::= { ciscoWirelessHotspotConfig 11 }
|
|
|
|
cLHotspotOsuProviderFriendlyNameEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotOsuProviderFriendlyNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the OSU-service provider
|
|
friendly name configuration for Hotspot 2.0 feature."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotOsuProviderName,
|
|
cLHotspotOsuProviderFriendlyNameLanguage
|
|
}
|
|
::= { cLHotspotOsuProviderFriendlyNameTable 1 }
|
|
|
|
CLHotspotOsuProviderFriendlyNameEntry ::= SEQUENCE {
|
|
cLHotspotOsuProviderFriendlyNameLanguage SnmpAdminString,
|
|
cLHotspotOsuProviderFriendlyNameRowStatus RowStatus,
|
|
cLHotspotOsuProviderFriendlyName SnmpAdminString,
|
|
cLHotspotOsuProviderFriendlyNameDescription SnmpAdminString
|
|
}
|
|
|
|
cLHotspotOsuProviderFriendlyNameLanguage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (2..3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the language defined for this OSU
|
|
friendly name."
|
|
::= { cLHotspotOsuProviderFriendlyNameEntry 1 }
|
|
|
|
cLHotspotOsuProviderFriendlyNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for
|
|
creation and deletion of a particular OSU provider
|
|
friendly name entry in the table."
|
|
::= { cLHotspotOsuProviderFriendlyNameEntry 2 }
|
|
|
|
cLHotspotOsuProviderFriendlyName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the friendly name in the specified
|
|
language for this particular OSU provider."
|
|
::= { cLHotspotOsuProviderFriendlyNameEntry 3 }
|
|
|
|
cLHotspotOsuProviderFriendlyNameDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the description for this particular
|
|
OSU provider. This is an optional parameter."
|
|
::= { cLHotspotOsuProviderFriendlyNameEntry 4 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * OSU provider icon table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotOsuProviderIconTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotOsuProviderIconEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list the icon configuration for an
|
|
Online-Signup provider of Hotspot 2.0."
|
|
::= { ciscoWirelessHotspotConfig 12 }
|
|
|
|
cLHotspotOsuProviderIconEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotOsuProviderIconEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the OSU-service provider
|
|
icon configuration for Hotspot 2.0 feature."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotOsuProviderName,
|
|
cLHotspotOsuProviderIconFileName
|
|
}
|
|
::= { cLHotspotOsuProviderIconTable 1 }
|
|
|
|
CLHotspotOsuProviderIconEntry ::= SEQUENCE {
|
|
cLHotspotOsuProviderIconFileName SnmpAdminString,
|
|
cLHotspotOsuProviderIconRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotOsuProviderIconFileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the icon filename for this OSU
|
|
provider."
|
|
::= { cLHotspotOsuProviderIconEntry 1 }
|
|
|
|
cLHotspotOsuProviderIconRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular OSU provider icon entry
|
|
in the table."
|
|
::= { cLHotspotOsuProviderIconEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Oprating Class table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotOperatingClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotOperatingClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Hotspot 2.0 operating class indicators."
|
|
::= { ciscoWirelessHotspotConfig 13 }
|
|
|
|
cLHotspotOperatingClassEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotOperatingClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the operating class indicator for
|
|
the Hotspot 2.0 ANQP server."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotOperatingClassId
|
|
}
|
|
::= { cLHotspotOperatingClassTable 1 }
|
|
|
|
CLHotspotOperatingClassEntry ::= SEQUENCE {
|
|
cLHotspotOperatingClassId Unsigned32,
|
|
cLHotspotOperatingClassRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotOperatingClassId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the operating class identifier
|
|
which indicates the group of channels in the frequency
|
|
bands that are in use. The values are defined in IEEE
|
|
802.11-2016, Part 11 specifications."
|
|
::= { cLHotspotOperatingClassEntry 1 }
|
|
|
|
cLHotspotOperatingClassRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular operating class
|
|
in the table."
|
|
::= { cLHotspotOperatingClassEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Icon table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotIconTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotIconEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of operator icon configuration for Hotspot 2.0."
|
|
::= { ciscoWirelessHotspotConfig 14 }
|
|
|
|
cLHotspotIconEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotIconEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the icon configuration for Hotspot 2.0
|
|
feature."
|
|
INDEX { cLHotspotIconFileName }
|
|
::= { cLHotspotIconTable 1 }
|
|
|
|
CLHotspotIconEntry ::= SEQUENCE {
|
|
cLHotspotIconFileName SnmpAdminString,
|
|
cLHotspotIconRowStatus RowStatus,
|
|
cLHotspotIconPath SnmpAdminString,
|
|
cLHotspotIconType SnmpAdminString,
|
|
cLHotspotIconLanguage SnmpAdminString,
|
|
cLHotspotIconWidth Unsigned32,
|
|
cLHotspotIconHeight Unsigned32
|
|
}
|
|
|
|
cLHotspotIconFileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the icon filename."
|
|
::= { cLHotspotIconEntry 1 }
|
|
|
|
cLHotspotIconRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular icon entry
|
|
in the table."
|
|
::= { cLHotspotIconEntry 2 }
|
|
|
|
cLHotspotIconPath OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (5 | 9))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the path where the icon
|
|
file is stored on the device. The allowed values
|
|
are flash and bootflash."
|
|
::= { cLHotspotIconEntry 3 }
|
|
|
|
cLHotspotIconType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the MIME media type of the
|
|
binary icon file formatted in accordance with RFC 4288.
|
|
The value is one of the IANA MIME media types regsitered
|
|
at http://www.iana.org/assignments/media-types/index.html."
|
|
::= { cLHotspotIconEntry 4 }
|
|
|
|
cLHotspotIconLanguage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (2..3))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the language code used in the
|
|
icon metadata field. It is a two or three character
|
|
language code selected from ISO-639. If there is no
|
|
linguistic content in the icon file, the language code
|
|
is set to zxx."
|
|
::= { cLHotspotIconEntry 5 }
|
|
|
|
cLHotspotIconWidth OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the width of the icon file
|
|
expressed in pixels."
|
|
::= { cLHotspotIconEntry 6 }
|
|
|
|
cLHotspotIconHeight OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the height of the icon file
|
|
expressed in pixels."
|
|
::= { cLHotspotIconEntry 7 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Venue Name table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotVenueNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotVenueNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of venue names along with their localized information."
|
|
::= { ciscoWirelessHotspotConfig 15 }
|
|
|
|
cLHotspotVenueNameEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotVenueNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing a venue name."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotVenueNameLanguage
|
|
}
|
|
::= { cLHotspotVenueNameTable 1 }
|
|
|
|
CLHotspotVenueNameEntry ::= SEQUENCE {
|
|
cLHotspotVenueNameLanguage SnmpAdminString,
|
|
cLHotspotVenueNameRowStatus RowStatus,
|
|
cLHotspotVenueNameDescription SnmpAdminString,
|
|
cLHotspotVenueNameUrl SnmpAdminString
|
|
}
|
|
|
|
cLHotspotVenueNameLanguage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (2..3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the language used to describe
|
|
this venue."
|
|
::= { cLHotspotVenueNameEntry 1 }
|
|
|
|
cLHotspotVenueNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular venue name entry
|
|
in the table."
|
|
::= { cLHotspotVenueNameEntry 2 }
|
|
|
|
cLHotspotVenueNameDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..252))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the name of this venue in the given
|
|
language."
|
|
::= { cLHotspotVenueNameEntry 3 }
|
|
|
|
cLHotspotVenueNameUrl OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an URL describing this venue in the
|
|
given language."
|
|
::= { cLHotspotVenueNameEntry 4 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Network Auth table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotNetworkAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotNetworkAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of authentication types required when Additional Steps
|
|
required for Access (ASRA) is enabled."
|
|
::= { ciscoWirelessHotspotConfig 16 }
|
|
|
|
cLHotspotNetworkAuthEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotNetworkAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing an authentication type."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotNetworkAuthType
|
|
}
|
|
::= { cLHotspotNetworkAuthTable 1 }
|
|
|
|
CLHotspotNetworkAuthEntry ::= SEQUENCE {
|
|
cLHotspotNetworkAuthType INTEGER,
|
|
cLHotspotNetworkAuthRowStatus RowStatus,
|
|
cLHotspotNetworkAuthUrl SnmpAdminString
|
|
}
|
|
|
|
cLHotspotNetworkAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
termsAndConditions(1),
|
|
onlineEnrollment(2),
|
|
httpHttpsRedirect(3),
|
|
dnsRedirect(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of authentication supported.
|
|
termsAndCondition : Acceptance of terms and conditions.
|
|
onlineEnrollment : On-line enrollment supported.
|
|
httpHttpsRedirect : Http/https redirection.
|
|
dnsRedirect : DNS redirection."
|
|
::= { cLHotspotNetworkAuthEntry 1 }
|
|
|
|
cLHotspotNetworkAuthRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular network authentication
|
|
entry in the table."
|
|
::= { cLHotspotNetworkAuthEntry 2 }
|
|
|
|
cLHotspotNetworkAuthUrl OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an optional redirection URL
|
|
used for client web authentication."
|
|
::= { cLHotspotNetworkAuthEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Advice of Charge table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotAdviceChargeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotAdviceChargeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of charge plans related to given hotspot access.
|
|
Table advice of charge provides information on
|
|
what kind of financial charges can result in the use of the
|
|
SSID for each of the NAI Realm. This table may not have a charge plan
|
|
entry for every anqp server present"
|
|
::= { ciscoWirelessHotspotConfig 17 }
|
|
|
|
cLHotspotAdviceChargeEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotAdviceChargeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing an single charge plan."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotAdviceChargeType
|
|
}
|
|
::= { cLHotspotAdviceChargeTable 1 }
|
|
|
|
CLHotspotAdviceChargeEntry ::= SEQUENCE {
|
|
cLHotspotAdviceChargeType INTEGER,
|
|
cLHotspotAdviceChargeRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotAdviceChargeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
time(1),
|
|
data(2),
|
|
timeAndData(3),
|
|
unlimited(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of charge provided.
|
|
time : Charge plan based on time information.
|
|
data : Charge plan on data volume information.
|
|
timeAndData : Charge plan based on time and data volume
|
|
information.
|
|
unlimited : Charge plan is not limited."
|
|
::= { cLHotspotAdviceChargeEntry 1 }
|
|
|
|
cLHotspotAdviceChargeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular advice of charge
|
|
entry in the table."
|
|
::= { cLHotspotAdviceChargeEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Advice of Charge Plan Information table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotAdviceChargePlanInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotAdviceChargePlanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of files decribing a charge plan for
|
|
a given hotspot access. Plan information table defines the details
|
|
of financial charges and multiple financial plans can be defined"
|
|
::= { ciscoWirelessHotspotConfig 18 }
|
|
|
|
cLHotspotAdviceChargePlanInfoEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotAdviceChargePlanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing a charge plan for a
|
|
given hotspot access."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotAdviceChargeType,
|
|
cLHotspotAdviceChargePlanInfoFilename,
|
|
cLHotspotAdviceChargePlanInfoPath
|
|
}
|
|
::= { cLHotspotAdviceChargePlanInfoTable 1 }
|
|
|
|
CLHotspotAdviceChargePlanInfoEntry ::= SEQUENCE {
|
|
cLHotspotAdviceChargePlanInfoFilename SnmpAdminString,
|
|
cLHotspotAdviceChargePlanInfoPath SnmpAdminString,
|
|
cLHotspotAdviceChargePlanInfoRowStatus RowStatus,
|
|
cLHotspotAdviceChargePlanInfoLanguage SnmpAdminString,
|
|
cLHotspotAdviceChargePlanInfoCurrency SnmpAdminString
|
|
}
|
|
|
|
cLHotspotAdviceChargePlanInfoFilename OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..220))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the file on the system
|
|
describing the charge plan."
|
|
::= { cLHotspotAdviceChargePlanInfoEntry 1 }
|
|
|
|
cLHotspotAdviceChargePlanInfoPath OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..231))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the system path of the file describing
|
|
charge plan information."
|
|
::= { cLHotspotAdviceChargePlanInfoEntry 2 }
|
|
|
|
cLHotspotAdviceChargePlanInfoRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular charge plan information
|
|
entry in the table."
|
|
::= { cLHotspotAdviceChargePlanInfoEntry 3 }
|
|
|
|
cLHotspotAdviceChargePlanInfoLanguage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (3))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the language ISO-14962-1997 encoded
|
|
used in the charge plan file."
|
|
::= { cLHotspotAdviceChargePlanInfoEntry 4 }
|
|
|
|
cLHotspotAdviceChargePlanInfoCurrency OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (3))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the currency ISO-4217 encoded
|
|
used for billing for the charge plan."
|
|
::= { cLHotspotAdviceChargePlanInfoEntry 5 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Advice of Charge NAI Realms table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotAdviceChargeNAIRealmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotAdviceChargeNAIRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of NAI realms associated with
|
|
given charge plan to hotspot access. NAI realm table defines
|
|
NAI realms that are included in each advice of charge"
|
|
::= { ciscoWirelessHotspotConfig 19 }
|
|
|
|
cLHotspotAdviceChargeNAIRealmEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotAdviceChargeNAIRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing a single NAI realm associated with charge plan."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotAdviceChargeType,
|
|
cLHotspotAdviceChargeNAIRealmName
|
|
}
|
|
::= { cLHotspotAdviceChargeNAIRealmTable 1 }
|
|
|
|
CLHotspotAdviceChargeNAIRealmEntry ::= SEQUENCE {
|
|
cLHotspotAdviceChargeNAIRealmName SnmpAdminString,
|
|
cLHotspotAdviceChargeNAIRealmRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotAdviceChargeNAIRealmName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..220))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies Realm name associated with charge plan."
|
|
::= { cLHotspotAdviceChargeNAIRealmEntry 1 }
|
|
|
|
cLHotspotAdviceChargeNAIRealmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Row Status for creation
|
|
and deletion of a particular NAI realm entry in the
|
|
table."
|
|
::= { cLHotspotAdviceChargeNAIRealmEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * EAP Auth table
|
|
-- ********************************************************************
|
|
|
|
cLHotspotEAPAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHotspotEAPAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of authentication EAP method details
|
|
for a given NAI realm."
|
|
::= { ciscoWirelessHotspotConfig 20 }
|
|
|
|
cLHotspotEAPAuthEntry OBJECT-TYPE
|
|
SYNTAX CLHotspotEAPAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing a single EAP
|
|
authentication method configuration details."
|
|
INDEX {
|
|
cLHotspotAnqpServerName,
|
|
cLHotspotRealmName,
|
|
cLHotspotRealmEAPMethod,
|
|
cLHotspotEAPAuthType
|
|
}
|
|
::= { cLHotspotEAPAuthTable 1 }
|
|
|
|
CLHotspotEAPAuthEntry ::= SEQUENCE {
|
|
cLHotspotEAPAuthType INTEGER,
|
|
cLHotspotEAPAuthRowStatus RowStatus
|
|
}
|
|
|
|
cLHotspotEAPAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
innerAuthPap(1),
|
|
innerAuthChap(2),
|
|
innerAuthMschap(3),
|
|
innerAuthMschapv2(4),
|
|
innerAuthEapTls(5),
|
|
innerAuthEapLeap(6),
|
|
innerAuthEapSim(7),
|
|
innerAuthEapTtls(8),
|
|
innerAuthEapAka(9),
|
|
innerAuthEapPeap(10),
|
|
innerAuthEapFast(11),
|
|
credentialSim(12),
|
|
credentialUsim(13),
|
|
credentialNfc(14),
|
|
credentialHwToken(15),
|
|
credentialSoftoken(16),
|
|
credentialCertificate(17),
|
|
credentialUsernamePassword(18),
|
|
credentialNone(19),
|
|
tunneledEapCredentialSim(20),
|
|
tunneledEapCredentialUsim(21),
|
|
tunneledEapCredentialNfc(22),
|
|
tunneledEapCredentialHwToken(23),
|
|
tunneledEapCredentialSoftoken(24),
|
|
tunneledEapCredentialCertificate(25),
|
|
tunneledEapCredentialUsernamePassword(26),
|
|
tunneledEapCredentialAnonymous(27)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Extensible Authentication Protocol
|
|
(EAP) authentication type defined.
|
|
innerAuthPap : Uses PAP as inner authentication
|
|
type.
|
|
innerAuthChap : Uses CHAP as inner authentication
|
|
type.
|
|
innerAuthMschap : Uses MSCHAP as inner authentication
|
|
type.
|
|
innerAuthMschapv2 : Uses MSCHAPv2 as inner
|
|
authentication type.
|
|
innerAuthEapTls : Uses EAP-TLS inner authentication
|
|
type.
|
|
innerAuthEapLeap : Uses EAP-LEAP inner authentication
|
|
type.
|
|
innerAuthEapSim : Uses EAP-SIM inner authentication
|
|
type.
|
|
innerAuthEapTtls : Uses EAP-TTLS inner authentication
|
|
type.
|
|
innerAuthEapAka : Uses EAP-AKA inner authentication
|
|
type.
|
|
innerAuthEapPeap : Uses EAP-PEAP inner authentication
|
|
type.
|
|
innerAuthEapFast : Uses EAP-FAST inner authentication
|
|
type.
|
|
credentialSim : Uses SIM credential authentication.
|
|
credentialUsim : Uses USIM credential authentication.
|
|
credentialNfc : Uses NFC credential authentication.
|
|
credentialHwToken : Uses hardware token credential
|
|
authentication.
|
|
credentialSoftoken : Uses softoken credential
|
|
authentication.
|
|
credentialCertificate : Uses certificate credential
|
|
authentication.
|
|
credentialUsernamePassword : Uses username and password
|
|
credential authentication.
|
|
credentialNone : Uses no credential authentication.
|
|
tunneledEapCredentialSim : Uses SIM tunneled EAP
|
|
credential authentication.
|
|
tunneledEapCredentialUsim : Uses USIM tunneled EAP
|
|
credential authentication.
|
|
tunneledEapCredentialNfc : Uses NFC tunneled EAP
|
|
credential authentication.
|
|
tunneledEapCredentialHwToken : Uses hardware token tunneled
|
|
EAP credential
|
|
authentication.
|
|
tunneledEapCredentialSoftoken : Uses softoken tunneled EAP
|
|
credential authentication.
|
|
tunneledEapCredentialCertificate : Uses certificate tunneled
|
|
EAP credential
|
|
authentication.
|
|
tunneledEapCredentialUsernamePassword : Uses username and
|
|
password tunneled
|
|
EAP credential
|
|
authentication.
|
|
tunneledEapCredentialAnonymous : Uses anonymous tunneled EAP
|
|
credential authentication."
|
|
::= { cLHotspotEAPAuthEntry 1 }
|
|
|
|
cLHotspotEAPAuthRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status column for a
|
|
conceptual row in this table. All writable objects
|
|
in this row may be modified when the row is active."
|
|
::= { cLHotspotEAPAuthEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Compliance statements
|
|
-- ********************************************************************
|
|
|
|
ciscoWirelessHotspotCompliances OBJECT IDENTIFIER
|
|
::= { ciscoWirelessHotspotMIBConform 1 }
|
|
|
|
ciscoWirelessHotspotGroups OBJECT IDENTIFIER
|
|
::= { ciscoWirelessHotspotMIBConform 2 }
|
|
|
|
|
|
ciscoWirelessHotspotCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoWirelessHotspotMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoWirelessHotspotConfigGroup1,
|
|
ciscoWirelessHotspotConfigGroup2
|
|
}
|
|
::= { ciscoWirelessHotspotCompliances 1 }
|
|
|
|
ciscoWirelessHotspotComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the compliance statement for the SNMP
|
|
entities that implement the ciscoWirelessHotspotMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoWirelessHotspotConfigGroup2,
|
|
ciscoWirelessHotspotConfigGroup3
|
|
}
|
|
::= { ciscoWirelessHotspotCompliances 2 }
|
|
|
|
ciscoWirelessHotspotConfigGroup1 OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHotspotAnqpServerDescription,
|
|
cLHotspotAnqpServerInternetEnabled,
|
|
cLHotspotAnqpServerNetworkType,
|
|
cLHotspotAnqpServerVenueType,
|
|
cLHotspotAnqpServerHessid,
|
|
cLHotspotGasRequestTimeout,
|
|
cLHotspotAnqpFragmentationThreshold,
|
|
cLHotspotAnqpDomainId,
|
|
cLHotspotAnqpDomainIdEnabled,
|
|
cLHotspotAnqpServerIpv4AddressType,
|
|
cLHotspotAnqpServerIpv6AddressType,
|
|
cLHotspotAnqpOsuSsid,
|
|
cLHotspotWanLinkStatus,
|
|
cLHotspotWanIsAtCapacity,
|
|
cLHotspotWanDownlinkSpeed,
|
|
cLHotspotWanUplinkSpeed,
|
|
cLHotspotWanDownlinkLoad,
|
|
cLHotspotWanUplinkLoad,
|
|
cLHotspotWanLoadMeasDuration,
|
|
cLHotspotAnqpServerRowStatus,
|
|
cLHotspotRoamingOIIsBeacon,
|
|
cLHotspotRoamingOIRowStatus,
|
|
cLHotspotDomainNameRowStatus,
|
|
cLHotspot3gppRowStatus,
|
|
cLHotspotRealmRowStatus,
|
|
cLHotspotRealmEAPRowStatus,
|
|
cLHotspotRealmEAPAuthInnerAuthEAPType,
|
|
cLHotspotRealmEAPAuthNonInnerAuthEAPType,
|
|
cLHotspotRealmEAPAuthCredentialType,
|
|
cLHotspotRealmEAPAuthTunneledEAPCredentialType,
|
|
cLHotspotRealmEAPAuthRowStatus,
|
|
cLHotspotConnectionCapabilityStatus,
|
|
cLHotspotConnectionCapabilityRowStatus,
|
|
cLHotspotOperatorName,
|
|
cLHotspotOperatorNameRowStatus,
|
|
cLHotspotOsuProviderServerUri,
|
|
cLHotspotOsuProviderNai,
|
|
cLHotspotOsuProviderPrimaryMethod,
|
|
cLHotspotOsuProviderSecondaryMethod,
|
|
cLHotspotOsuProviderRowStatus,
|
|
cLHotspotOsuProviderFriendlyName,
|
|
cLHotspotOsuProviderFriendlyNameDescription,
|
|
cLHotspotOsuProviderFriendlyNameRowStatus,
|
|
cLHotspotOsuProviderIconRowStatus,
|
|
cLHotspotOperatingClassRowStatus,
|
|
cLHotspotVenueNameDescription,
|
|
cLHotspotVenueNameUrl,
|
|
cLHotspotVenueNameRowStatus,
|
|
cLHotspotNetworkAuthUrl,
|
|
cLHotspotNetworkAuthRowStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects represents the
|
|
Hotspot ANQP server attributes.
|
|
ciscoWirelessHotspotConfigGroup1 object is superseded by ciscoWirelessHotspotConfigGroup3."
|
|
::= { ciscoWirelessHotspotGroups 1 }
|
|
|
|
ciscoWirelessHotspotConfigGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHotspotIconPath,
|
|
cLHotspotIconType,
|
|
cLHotspotIconLanguage,
|
|
cLHotspotIconWidth,
|
|
cLHotspotIconHeight,
|
|
cLHotspotIconRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the
|
|
Hotspot icon attributes."
|
|
::= { ciscoWirelessHotspotGroups 2 }
|
|
|
|
ciscoWirelessHotspotConfigGroup3 OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHotspotAnqpServerDescription,
|
|
cLHotspotAnqpServerInternetEnabled,
|
|
cLHotspotAnqpServerNetworkType,
|
|
cLHotspotAnqpServerVenueType,
|
|
cLHotspotAnqpServerHessid,
|
|
cLHotspotGasRequestTimeout,
|
|
cLHotspotAnqpFragmentationThreshold,
|
|
cLHotspotAnqpDomainId,
|
|
cLHotspotAnqpDomainIdEnabled,
|
|
cLHotspotAnqpServerIpv4AddressType,
|
|
cLHotspotAnqpServerIpv6AddressType,
|
|
cLHotspotAnqpOsuSsid,
|
|
cLHotspotWanLinkStatus,
|
|
cLHotspotWanIsAtCapacity,
|
|
cLHotspotWanDownlinkSpeed,
|
|
cLHotspotWanUplinkSpeed,
|
|
cLHotspotWanDownlinkLoad,
|
|
cLHotspotWanUplinkLoad,
|
|
cLHotspotWanLoadMeasDuration,
|
|
cLHotspotTermsConditionsFilename,
|
|
cLHotspotTermsConditionsDate,
|
|
cLHotspotTermsConditionsTime,
|
|
cLHotspotTermsConditionsUrlFilter,
|
|
cLHotspotAnqpServerRowStatus,
|
|
cLHotspotRoamingOIIsBeacon,
|
|
cLHotspotRoamingOIRowStatus,
|
|
cLHotspotDomainNameRowStatus,
|
|
cLHotspot3gppRowStatus,
|
|
cLHotspotRealmRowStatus,
|
|
cLHotspotRealmEAPRowStatus,
|
|
cLHotspotConnectionCapabilityStatus,
|
|
cLHotspotConnectionCapabilityRowStatus,
|
|
cLHotspotOperatorName,
|
|
cLHotspotOperatorNameRowStatus,
|
|
cLHotspotOsuProviderServerUri,
|
|
cLHotspotOsuProviderNai,
|
|
cLHotspotOsuProviderPrimaryMethod,
|
|
cLHotspotOsuProviderSecondaryMethod,
|
|
cLHotspotOsuProviderRowStatus,
|
|
cLHotspotOsuProviderFriendlyName,
|
|
cLHotspotOsuProviderFriendlyNameDescription,
|
|
cLHotspotOsuProviderFriendlyNameRowStatus,
|
|
cLHotspotOsuProviderIconRowStatus,
|
|
cLHotspotOperatingClassRowStatus,
|
|
cLHotspotVenueNameDescription,
|
|
cLHotspotVenueNameUrl,
|
|
cLHotspotVenueNameRowStatus,
|
|
cLHotspotNetworkAuthUrl,
|
|
cLHotspotNetworkAuthRowStatus,
|
|
cLHotspotAdviceChargeRowStatus,
|
|
cLHotspotAdviceChargePlanInfoRowStatus,
|
|
cLHotspotAdviceChargePlanInfoLanguage,
|
|
cLHotspotAdviceChargePlanInfoCurrency,
|
|
cLHotspotAdviceChargeNAIRealmRowStatus,
|
|
cLHotspotEAPAuthRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the
|
|
Hotspot ANQP server attributes."
|
|
::= { ciscoWirelessHotspotGroups 3 }
|
|
|
|
END
|
|
|
|
|