678 lines
25 KiB
Plaintext
678 lines
25 KiB
Plaintext
-- *******************************************************************
|
|
-- CISCO-LWAPP-DOT11-CLIENT-TS-MIB.my:
|
|
-- Wireless Client Trouble Shooting
|
|
--
|
|
-- March 2007, Ambika Prasad Mohanty
|
|
--
|
|
-- Copyright (c) 2007, 2011-2012 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *******************************************************************
|
|
|
|
CISCO-LWAPP-DOT11-CLIENT-TS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
RowStatus,
|
|
TruthValue,
|
|
TimeStamp
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
cldcClientMacAddress
|
|
FROM CISCO-LWAPP-DOT11-CLIENT-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoLwappDot11ClientTsMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201206110000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central controllers, that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Cisco Light-weight LWAPP Access Points.
|
|
|
|
This MIB provides information about troubleshooting 802.11
|
|
clients during their association with the controller.
|
|
The clients that need to be monitored are added by the
|
|
controller to a watchlist. Once added the controller
|
|
will start storing the messages related to that client.
|
|
These messages are useful to troubleshoot the reasons
|
|
for failures during assoication.
|
|
|
|
The relationship between CC and the LWAPP APs
|
|
can be depicted as follows:
|
|
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ CC + + CC + + CC + + CC +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
.. . . .
|
|
.. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ AP + + AP + + AP + + AP + + AP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ MN + + MN + + MN + + MN + + MN +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends them to the controller to which
|
|
it is logically connected.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity also referred to as 'controller'.
|
|
|
|
Cisco Compatible eXtensions (CCX)
|
|
|
|
Wireless LAN Access Points (APs) manufactured by Cisco
|
|
Systems have features and capabilities beyond those in
|
|
related standards (e.g., IEEE 802.11 suite of
|
|
standards, Wi-Fi recommendations by WECA, 802.1X
|
|
security suite, etc). A number of features provide
|
|
higher performance. For example, Cisco AP transmits a
|
|
specific Information Element, which the clients adapt
|
|
to for enhanced performance. Similarly, a number of
|
|
features are implemented by means of proprietary
|
|
Information Elements, which Cisco clients use in
|
|
specific ways to carry out tasks above and beyond the
|
|
standard. Other examples of feature categories are
|
|
roaming and power saving.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point. The terms
|
|
'Mobile node' and 'client' are used interchangeably.
|
|
|
|
Radio Management (RM)
|
|
|
|
This term refers to managing the 802.11 radio
|
|
environment to provide the best quality service to
|
|
to the 802.11 wireless clients.
|
|
|
|
Service Set Identifier ( SSID )
|
|
|
|
SSID is a unique identifier that APs and clients
|
|
use to identify with each other. SSID is a simple
|
|
means of access control and is not for security.
|
|
The SSID can be any alphanumeric entry up to 32
|
|
characters.
|
|
|
|
REFERENCE
|
|
|
|
[1] Wireless LAN Medium Access Control ( MAC ) and
|
|
Physical Layer ( PHY ) Specifications
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol"
|
|
REVISION "201206110000Z"
|
|
DESCRIPTION
|
|
"Added new bit mobility to cldctWatchListModuleList
|
|
and cldctClientInfoModule."
|
|
REVISION "201201250000Z"
|
|
DESCRIPTION
|
|
"Added the following new object to cldctClientInfoTable.
|
|
cldctClientInfoMessageType and cldctClientInfoMessageSubType
|
|
|
|
Added two new bits voiceQoS and misc to
|
|
cldctWatchListModuleList and cldctClientInfoModule.
|
|
|
|
Added a new supplement group
|
|
ciscoLwappDot11ClientTsStatusSupGroupRev1.
|
|
|
|
Added new compliance ciscoLwappDot11ClientTsMIBComplianceRev1
|
|
which deprecates ciscoLwappDot11ClientTsMIBCompliance."
|
|
REVISION "200703080000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 622 }
|
|
|
|
|
|
ciscoLwappDot11ClientTsMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIB 0 }
|
|
|
|
ciscoLwappDot11ClientTsMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIB 1 }
|
|
|
|
ciscoLwappDot11ClientTsMIBConfirm OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIB 2 }
|
|
|
|
cldctClientInfo OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIBObjects 1 }
|
|
|
|
cldctWatchList OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIBObjects 2 }
|
|
|
|
cldctLastPemStateInfo OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIBObjects 3 }
|
|
|
|
|
|
cldctWatchListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CldctWatchListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the clients which are being monitored by
|
|
the controller during association.
|
|
The types of clients that can be monitored are CCX, non-CCX
|
|
and WGB clients.
|
|
|
|
Entries are created by explicit management action by the
|
|
user.
|
|
|
|
A row is created by specifying the cldctWatchListModuleList,
|
|
cldctWatchListTimeRemaining and cldcClientMacAddress with the
|
|
'RowStatus' changed to createAndGo.
|
|
This indicates that the request is made to start storing the
|
|
the messages on the controller for the client identified by
|
|
cldcClientMacAddress.
|
|
|
|
The added row is deleted by setting the corresponding
|
|
instance of the RowStatus object to 'destroy'. In
|
|
case if the agent finds that the time duration
|
|
represented by cldctWatchListTimeRemaining has elapsed since
|
|
the addtion of the client to the watchlist, it proceeds to
|
|
delete the row automatically, if the row exists at that point
|
|
of time.
|
|
The messages stored on the controller can be obtained
|
|
from cldctClientInfoTable."
|
|
::= { cldctWatchList 1 }
|
|
|
|
cldctWatchListEntry OBJECT-TYPE
|
|
SYNTAX CldctWatchListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table represents one instance
|
|
of the client troubleshooting initiated by the user
|
|
through a network manager."
|
|
INDEX { cldcClientMacAddress }
|
|
::= { cldctWatchListTable 1 }
|
|
|
|
CldctWatchListEntry ::= SEQUENCE {
|
|
cldctWatchListModuleList BITS,
|
|
cldctWatchListTimeRemaining Unsigned32,
|
|
cldctWatchListRowStatus RowStatus
|
|
}
|
|
|
|
cldctWatchListModuleList OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
dot11(0),
|
|
dot1x(1),
|
|
pem(2),
|
|
dhcp(3),
|
|
aaa(4),
|
|
voiceQoS(5),
|
|
misc(6),
|
|
mobility(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify the list of modules per
|
|
client whose messages will be stored by the controller.
|
|
Any combination of the modules can be set.
|
|
|
|
'dot11' - This value represents the module in controller
|
|
responsible for handling the 802.11 messages.
|
|
|
|
'dot1x' - This value represents the module responsible
|
|
for handling the extensible authentication protocol
|
|
related messages.
|
|
|
|
'pem' - This value represents the module responsible for
|
|
handling the policy enforcement module.
|
|
|
|
'dhcp' - This value represents the module responsible for
|
|
handling dhcp related messages.
|
|
|
|
'aaa' - This value represents the module responsible for
|
|
handling radius related messages.
|
|
|
|
'voiceQoS' - This value represents the module responsible for
|
|
handling voice/Qos module related messages.
|
|
|
|
'misc' - This value represents the module responsible for
|
|
handling miscellaneous module messages
|
|
(eg: roam history).
|
|
|
|
'mobility' - This value represents the module responsible for
|
|
handling mobility related messages."
|
|
::= { cldctWatchListEntry 1 }
|
|
|
|
cldctWatchListTimeRemaining OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..1000)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify the time after which
|
|
the client will be automatically removed from the
|
|
watchlist."
|
|
DEFVAL { 10 }
|
|
::= { cldctWatchListEntry 2 }
|
|
|
|
cldctWatchListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the status of a row and
|
|
is used to create and delete specific instances
|
|
of rows in this table."
|
|
::= { cldctWatchListEntry 3 }
|
|
|
|
|
|
-- ******************************************************************
|
|
-- Client Debug Logs
|
|
-- ******************************************************************
|
|
|
|
cldctClientInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CldctClientInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ths table populates the messages generated during client's
|
|
association with the controller.
|
|
Entries are automatically addded by the controller
|
|
when the client for the cldctWatchListTable associates
|
|
with the controller.
|
|
Each row represents a message generated on the
|
|
controller for the client on the watch list.
|
|
Entries are automatically removed by the controller
|
|
when the client is removed from the watchlist.
|
|
The number of message per client is limited to the number
|
|
specified by the cldctClientInfoMaxEntries object. When
|
|
the maximum number of entries is reached the older entries
|
|
will be deleted."
|
|
::= { cldctClientInfo 1 }
|
|
|
|
cldctClientInfoEntry OBJECT-TYPE
|
|
SYNTAX CldctClientInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table represents the messages
|
|
generated on the controller during the client's
|
|
association with it."
|
|
INDEX {
|
|
cldcClientMacAddress,
|
|
cldctClientInfoIndex
|
|
}
|
|
::= { cldctClientInfoTable 1 }
|
|
|
|
CldctClientInfoEntry ::= SEQUENCE {
|
|
cldctClientInfoIndex Unsigned32,
|
|
cldctClientInfoGeneratedTime TimeStamp,
|
|
cldctClientInfoLevel INTEGER,
|
|
cldctClientInfoSeverity INTEGER,
|
|
cldctClientInfoModule INTEGER,
|
|
cldctClientInfoResultCode TruthValue,
|
|
cldctClientInfoMsgString OCTET STRING,
|
|
cldctClientInfoMessageType Unsigned32,
|
|
cldctClientInfoMessageSubType Unsigned32
|
|
}
|
|
|
|
cldctClientInfoIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object uniquely identifies the sequence number of
|
|
the message for a watch listed client."
|
|
::= { cldctClientInfoEntry 1 }
|
|
|
|
cldctClientInfoGeneratedTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the absolute time when entry
|
|
was added to table."
|
|
::= { cldctClientInfoEntry 2 }
|
|
|
|
cldctClientInfoLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
phase(1),
|
|
state(2),
|
|
normal(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the types of messages generated
|
|
by the watch listed client.
|
|
|
|
There can be three types of messages.
|
|
|
|
'phase' - This value represents phase transition of a
|
|
wireless client. The various phases include
|
|
802.11, 8021x, dhcp etc.
|
|
|
|
'state' - This value represents a state transition of a
|
|
wireless client. The states could be association
|
|
request, authentication request etc. for 802.11
|
|
phase.
|
|
|
|
'normal' - This value represents an informational message
|
|
generated during 802.11 client's association to
|
|
the controller."
|
|
::= { cldctClientInfoEntry 3 }
|
|
|
|
cldctClientInfoSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(1),
|
|
error(2),
|
|
critical(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates severity of the information of
|
|
the client trouble shooting messages. This object holds
|
|
good only if the corresponding cldctClientInfoLevel is set
|
|
to 'normal'.
|
|
|
|
'info' - This is an information message.
|
|
|
|
'error' - This is an error message.
|
|
|
|
'critical' - This is a critical message."
|
|
::= { cldctClientInfoEntry 4 }
|
|
|
|
cldctClientInfoModule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11(1),
|
|
dot1x(2),
|
|
pem(3),
|
|
dhcp(4),
|
|
aaa(5),
|
|
voiceQoS(6),
|
|
misc(7),
|
|
mobility(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module which
|
|
generated the message.
|
|
|
|
'dot11' - This value represents the module in controller
|
|
responsible for handling the 802.11 messages.
|
|
|
|
'dot1x' - This value represents the module responsible for
|
|
handling the extensible authentication protocol.
|
|
|
|
'pem' - This value represents the module responsible for
|
|
handling the policy enforcement module.
|
|
|
|
'dhcp' - This value represents the module responsible for
|
|
handling dhcp related messages.
|
|
|
|
'aaa' - This value represents the module responsible for
|
|
handling radius related messages.
|
|
|
|
'voiceQoS' - This value represents the module responsible for
|
|
handling voice/Qos module related messages.
|
|
|
|
'misc' - This value represents the module responsible for
|
|
handling miscellaneous module messages.
|
|
(eg: roam history).
|
|
|
|
'mobility' - This value represents the module responsible for
|
|
handling mobility related messages."
|
|
::= { cldctClientInfoEntry 5 }
|
|
|
|
cldctClientInfoResultCode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if this message is an
|
|
informational message or an error message.
|
|
This object holds good only if the corresponding
|
|
cldctClientInfoLevel object has a value of
|
|
'phase' or 'state'.
|
|
A value of true indicates that this message is an
|
|
informational message.
|
|
A value of false indicates that this message is an
|
|
error message."
|
|
::= { cldctClientInfoEntry 6 }
|
|
|
|
cldctClientInfoMsgString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the variable part of the
|
|
message generated by the controller for this client.
|
|
For example if the message to be shown to the user is
|
|
'Client got ip address 10.52.43.54', the '10.52.43.54'
|
|
is a variable part which will be different for different
|
|
clients."
|
|
::= { cldctClientInfoEntry 7 }
|
|
|
|
cldctClientInfoMessageType OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of the
|
|
messsage generated by the controller for this client."
|
|
::= { cldctClientInfoEntry 8 }
|
|
|
|
cldctClientInfoMessageSubType OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects represents sub-type of the
|
|
messsage generated by the controller for this client."
|
|
::= { cldctClientInfoEntry 9 }
|
|
|
|
|
|
|
|
cldctClientInfoMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum number of
|
|
entries per client(cldcClientMacAddress) in the
|
|
cldctClientInfoTable."
|
|
DEFVAL { 2000 }
|
|
::= { cldctClientInfo 2 }
|
|
|
|
cldctLastPemStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CldctLastPemStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table stores the last policy enforcement
|
|
state of client in the controller. The state here is
|
|
represented as a string. For example the state can be
|
|
'RUN','WEBAUTH_REQUIRED' etc.
|
|
Entries are automaticaly added to this table when a
|
|
802.11 client associates to a controller.
|
|
Entries in this table are automaticaly deleted by
|
|
the controller when the 802.11 client disassociates
|
|
from the controller."
|
|
::= { cldctLastPemStateInfo 1 }
|
|
|
|
cldctLastPemStateEntry OBJECT-TYPE
|
|
SYNTAX CldctLastPemStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents a conceptual row in this table.
|
|
An entry represents the last PEM state report by a wireless
|
|
client."
|
|
INDEX { cldcClientMacAddress }
|
|
::= { cldctLastPemStateTable 1 }
|
|
|
|
CldctLastPemStateEntry ::= SEQUENCE {
|
|
cldctLastPemState SnmpAdminString
|
|
}
|
|
|
|
cldctLastPemState OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the last policy enforcement
|
|
manager state of the client in controller."
|
|
::= { cldctLastPemStateEntry 1 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Compliance statements
|
|
-- *******************************************************************
|
|
|
|
ciscoLwappDot11ClientTsMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIBConfirm 1 }
|
|
|
|
ciscoLwappDot11ClientTsMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoLwappDot11ClientTsMIBConfirm 2 }
|
|
|
|
|
|
ciscoLwappDot11ClientTsMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappDot11ClientTsMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappDot11ClientTsConfigGroup,
|
|
ciscoLwappDot11ClientTsStatusGroup
|
|
}
|
|
::= { ciscoLwappDot11ClientTsMIBCompliances 1 }
|
|
|
|
ciscoLwappDot11ClientTsMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappDot11ClientTsMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappDot11ClientTsConfigGroup,
|
|
ciscoLwappDot11ClientTsStatusGroup,
|
|
ciscoLwappDot11ClientTsStatusSupGroupRev1
|
|
}
|
|
::= { ciscoLwappDot11ClientTsMIBCompliances 2 }
|
|
|
|
-- *******************************************************************
|
|
-- * Units of conformance
|
|
-- *******************************************************************
|
|
|
|
ciscoLwappDot11ClientTsConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cldctWatchListModuleList,
|
|
cldctWatchListTimeRemaining
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a collection of objects which can
|
|
be configured per 802.11 clients for the
|
|
controller to start monitoring them."
|
|
::= { ciscoLwappDot11ClientTsMIBGroups 1 }
|
|
|
|
ciscoLwappDot11ClientTsStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cldctClientInfoGeneratedTime,
|
|
cldctClientInfoLevel,
|
|
cldctClientInfoSeverity,
|
|
cldctClientInfoModule,
|
|
cldctClientInfoResultCode,
|
|
cldctClientInfoMsgString,
|
|
cldctWatchListRowStatus,
|
|
cldctClientInfoMaxEntries,
|
|
cldctLastPemState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a collection of objects which represent
|
|
the information of various watch listed
|
|
clients present on the controller. The information
|
|
includes the various states and phases that the client
|
|
goes through while getting associated with the
|
|
controller."
|
|
::= { ciscoLwappDot11ClientTsMIBGroups 2 }
|
|
|
|
ciscoLwappDot11ClientTsStatusSupGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
cldctClientInfoMessageType,
|
|
cldctClientInfoMessageSubType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a collection of objects which represent
|
|
the information on the types and sub-types of
|
|
messages generated by the controller for the clients."
|
|
::= { ciscoLwappDot11ClientTsMIBGroups 3 }
|
|
|
|
END
|
|
|
|
|
|
|