1569 lines
48 KiB
Plaintext
1569 lines
48 KiB
Plaintext
--* Ambika Mohanty
|
|
--
|
|
--Copyright (c) 2006 by Cisco Systems, Inc.
|
|
--All rights reserved.
|
|
--
|
|
--This MIB captures all the elements used to represent the requests
|
|
--and responses during the dignostic tests of a ccxv5 client.
|
|
--
|
|
--The Diagnostic Channel capability is a mechanism that automates
|
|
--the troubleshooting of client problems communicating with the WLAN.
|
|
--The mechanism is available, on demand, from any AP in the WLAN
|
|
--advertising the capability.When triggered by a client having
|
|
--difficulties, the diagnostic channel is a WLAN configured to
|
|
--provide the most robust communication methods with the least
|
|
--obstacles to communication placed in the path of the client.
|
|
--The client and AP will proceed through a defined set of tests
|
|
--and responses in an attempt to identify the cause of the
|
|
--communication difficulties experienced by the client.
|
|
--*******************************************************************
|
|
|
|
CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MacAddress,
|
|
TruthValue,
|
|
RowStatus,
|
|
TimeStamp,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
CiscoMilliSeconds
|
|
FROM CISCO-TC
|
|
CiscoLwappDot11ClientAuthMethod,
|
|
CLDot11ClientDiagAssocReason
|
|
FROM CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB
|
|
cldcClientMacAddress,
|
|
ciscoLwappDot11ClientCcxMIBObjects
|
|
FROM CISCO-LWAPP-DOT11-CLIENT-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
--********************************************************************
|
|
--* MODULE IDENTITY
|
|
--********************************************************************
|
|
|
|
ciscoLwappDot11CcxClientDiagMIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "200606240000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central Controllers (CC) that
|
|
terminate the Light Weight Access Point Protocol
|
|
(LWAPP) tunnel from Light-weight Access Points.
|
|
|
|
Link Test is performed to learn the backhaul link
|
|
quality between two mesh neighboring mesh nodes.
|
|
|
|
The arrangement of the controller
|
|
(referred to as CC in the diagram) and mesh nodes
|
|
(RAP and MAP) LWAPP APs ,client(MN) and NMS appear
|
|
as follows.
|
|
|
|
+.......+ +.......+
|
|
+ + + +
|
|
+ NMS + + NMS +
|
|
+ + + +
|
|
+.......+ +.......+
|
|
. .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ CC + + CC + + CC + + CC +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
.. . . .
|
|
.. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ RAP + + RAP + + RAP + + RAP + + RAP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ MAP + + MN + + MAP + + MAP + + MAP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . .. .
|
|
. . . .. .
|
|
. . . .. .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+. +......+
|
|
+ + + + + + + + + +
|
|
+ MAP + + MAP + + MAP + + MAP + + MN +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
|
|
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard. The
|
|
controllers and the IDS systems exchange information
|
|
through Cisco proprietary event exchange mechanisms.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the
|
|
configuration, that includes the WLAN parameters, to
|
|
the LWAPP APs. The APs then encapsulate all the 802.11
|
|
frames from wireless clients inside LWAPP frames and
|
|
forward the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends them to the controller to which
|
|
it is logically connected.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity is also referred to as 'controller'.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point. Mobile Node
|
|
and client are used interchangeably.
|
|
|
|
Network Management System ( NMS )
|
|
|
|
The station from which the administrator manages the
|
|
wired and wireless networks.
|
|
|
|
Mesh Node
|
|
|
|
A mesh node is defined as a physical or logical entity
|
|
in the mesh network participating in forming the mesh
|
|
backhaul. There are two types of mesh nodes supported
|
|
in Cisco mesh network:RAP and MAP.
|
|
|
|
Root AP (RAP)
|
|
|
|
The AP forming the bridge between a wired and a mesh
|
|
network with an Ethernet interface to the wired
|
|
network and a 802.11 radio interface to the mesh
|
|
network
|
|
|
|
Mesh AP (MAP).
|
|
|
|
The AP extending wireless coverage similar to a
|
|
repeater in a mesh network and consists of a 802.11
|
|
uplink and a 802.11 downlink. On a single-radio
|
|
backhaul, both uplink and downlink exist on the same
|
|
radio and are logical links only. On a multi-radio
|
|
backhaul, they may exist on different radios.MAP APs
|
|
associates directly with RAP APs or with another MAP
|
|
AP. Each association of AP (MAP-MAP or RAP-MAP) with
|
|
another AP forms parent-child relationship.
|
|
|
|
Mesh Network
|
|
|
|
Network starting with the wireless backhaul downlink
|
|
of the RAP and all the entities below except any
|
|
attached network to the Ethernet link of MAPs. A mesh
|
|
network below a single RAP is also referred to as a
|
|
'Mesh Sector'.A mesh network consists of mesh nodes.
|
|
A single mesh network is always augmented to a single
|
|
wired network.
|
|
|
|
Mesh Link
|
|
|
|
A logical 802.11 link between two mesh nodes. A single
|
|
link is point-to-point. All point-to-multipoint links
|
|
are considered as multiple mesh links. Often referred
|
|
to as mesh backhaul link.
|
|
|
|
Mesh Backhaul
|
|
|
|
A Mesh backhaul consists of mesh nodes and mesh links
|
|
terminating at a RAP. This necessarily creates a one-
|
|
to-one relationship between a 'mesh network', 'mesh
|
|
sector' and a 'mesh backhaul' where these terms can be
|
|
used interchangeably.
|
|
|
|
SNR
|
|
Signal to Noise ratio on the 802.11 radio.
|
|
|
|
Bridged network
|
|
The bridged network is defined as the network(s)
|
|
attached to the Ethernet port of any MAP. There can be
|
|
multiple such networks attached to a single mesh
|
|
network.
|
|
|
|
REFERENCE
|
|
|
|
[1] Wireless LAN Medium Access Control ( MAC ) and
|
|
Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol "
|
|
|
|
REVISION "200604100000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoLwappDot11ClientCcxMIBObjects 2 }
|
|
|
|
ciscoLwappDot11CcxClientDiagMIBObjects OBJECT IDENTIFIER
|
|
::={ ciscoLwappDot11CcxClientDiagMIB 0 }
|
|
|
|
ciscoLwappDot11CcxClientDiagMIBNotifs OBJECT IDENTIFIER
|
|
::={ ciscoLwappDot11CcxClientDiagMIB 1 }
|
|
|
|
ciscoLwappDot11CcxClientDiagMIBNotifObjs OBJECT IDENTIFIER
|
|
::={ ciscoLwappDot11CcxClientDiagMIB 2 }
|
|
|
|
ciscoClientCcxDiagRequest OBJECT IDENTIFIER
|
|
::={ ciscoLwappDot11CcxClientDiagMIBObjects 1 }
|
|
|
|
ciscoClientCcxDiagResponse OBJECT IDENTIFIER
|
|
::={ ciscoLwappDot11CcxClientDiagMIBObjects 2 }
|
|
|
|
ciscoClientCcxDiagStatus OBJECT IDENTIFIER
|
|
::={ ciscoLwappDot11CcxClientDiagMIBObjects 3 }
|
|
|
|
--- *************************************************************
|
|
--- This textual convention is used to represet the test result
|
|
--- of the various diagnostic tests
|
|
--- *************************************************************
|
|
|
|
CiscoLwappCcxDiagResponseStatus ::= TEXTUAL-CONVENTION
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the response status of the ccx
|
|
diag tests."
|
|
|
|
SYNTAX INTEGER {
|
|
successful(0),
|
|
fail(1),
|
|
refused(3),
|
|
incapable(4),
|
|
unknown(5)
|
|
}
|
|
|
|
CiscoLwappCcxDiagTestStatus ::= TEXTUAL-CONVENTION
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the last test status of the ccx
|
|
diag tests."
|
|
|
|
SYNTAX INTEGER {
|
|
successful(0),
|
|
pending(1),
|
|
timeout(3),
|
|
stopped(4),
|
|
mismatch(5)
|
|
}
|
|
|
|
|
|
CiscoLwappDot11ClientDot1xCredential::= TEXTUAL-CONVENTION
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the dotx
|
|
credential identifier."
|
|
|
|
SYNTAX INTEGER {
|
|
pre-sharedkey(0),
|
|
username-password(1),
|
|
xdot(2),
|
|
other-cert(3),
|
|
one-time-password(4),
|
|
secure-id-token(5),
|
|
none(255)
|
|
}
|
|
|
|
CiscoLwappDot11ClientAbortTestReason::= TEXTUAL-CONVENTION
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the reason
|
|
for abortion of ccx diag test."
|
|
|
|
SYNTAX INTEGER {
|
|
reserved(0),
|
|
timeout(1),
|
|
cancelled-by-operator(2)
|
|
}
|
|
|
|
CiscoLwappDot11ClientInitiateTest::= TEXTUAL-CONVENTION
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute says whether the test
|
|
is to be started or aborted."
|
|
|
|
SYNTAX INTEGER {
|
|
initiate-test(1),
|
|
abort-test(2)
|
|
}
|
|
|
|
--- *******************************************************************
|
|
--- To determine that DHCP is operating properly between the controller
|
|
--- and client, the DHCP test executes a complete DHCP Discover/Offer/
|
|
--- Request/ACK exchange.The client shall attempt to obtain a DHCP
|
|
--- lease, beginning with a broadcast DHCP Discover packet. The client
|
|
--- shall log the time of transmission and reception of each DHCP
|
|
--- packet, as well as the entire content of the frame containing those
|
|
--- packets, for subsequent transmission to the AP.The frames captured
|
|
--- and logged shall be in Cleartext, even if the frames were
|
|
--- cldccDiagDhcpTestClientMacAddress MacAddress,
|
|
--- originally encrypted.The following two tables are used to represent
|
|
--- request and response parameters of DHCP Test.
|
|
--- *******************************************************************
|
|
|
|
--- *******************************************************************
|
|
-- DHCP Test Request Table
|
|
--- *******************************************************************
|
|
|
|
cldccDiagDhcpTestReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagDhcpTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains request params for dhcp test to
|
|
be performed by the client."
|
|
|
|
::= { ciscoClientCcxDiagRequest 1}
|
|
|
|
cldccDiagDhcpTestReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagDhcpTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table identified by the
|
|
client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= {cldccDiagDhcpTestReqTable 1}
|
|
|
|
|
|
CldccDiagDhcpTestReqEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagDhcpTestReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagDhcpTestReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this
|
|
table.To add a row in this table, createAndGo row status
|
|
will be used.To remove a row, this field will be set to
|
|
destroy."
|
|
|
|
::= { cldccDiagDhcpTestReqEntry 1}
|
|
|
|
|
|
---*******************************************************************
|
|
--- DHCP Test Response Table
|
|
---*******************************************************************
|
|
|
|
cldccDiagDhcpTestRespTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagDhcpTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains response for dhcp
|
|
test performed by the client."
|
|
|
|
::= { ciscoClientCcxDiagResponse 1}
|
|
|
|
cldccDiagDhcpTestRespEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagDhcpTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagDhcpTestRespTable 1}
|
|
|
|
|
|
CldccDiagDhcpTestRespEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagDhcpTestRespDhcpOffer OCTET STRING
|
|
}
|
|
|
|
|
|
cldccDiagDhcpTestRespDhcpOffer OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING (SIZE(1..256 ))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field will have the complete set
|
|
of DHCP options returned in the DHCP Offer."
|
|
|
|
::= { cldccDiagDhcpTestRespEntry 1}
|
|
|
|
--- *******************************************************************
|
|
--- To determine that IP connectivity exists to the Dns server,
|
|
--- the Dns server ping test causes the client to execute a ping
|
|
--- test of the Dns server obtained in the DHCP test.
|
|
--- Upon receipt of the Dns server ping test request element, the client
|
|
--- shall cause the normally instantiated protocol stack to transmit
|
|
--- one or more ICMP echo request packets (ping packets) to the Dns
|
|
--- server, using the parameters supplied in the ping request from the
|
|
--- AP.For the duration of the test, the client shall log the time of
|
|
--- transmission and reception of all packets, as well as the entire
|
|
--- content of the frames containing those packets, for subsequent
|
|
--- transmission to the AP.
|
|
---
|
|
--- The following two tables represent request and response tables for
|
|
--- ping tests.
|
|
--- *******************************************************************
|
|
|
|
|
|
--- *******************************************************************
|
|
--- Dns Server Ping Test Request
|
|
-- ********************************************************************
|
|
|
|
|
|
cldccDiagPingTestReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagPingTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the parameters for DNS ping test
|
|
request."
|
|
|
|
::= { ciscoClientCcxDiagRequest 2 }
|
|
|
|
cldccDiagPingTestReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagPingTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table where each entry is identified
|
|
by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagPingTestReqTable 1 }
|
|
|
|
|
|
CldccDiagPingTestReqEntry::=
|
|
|
|
SEQUENCE {
|
|
cldccDiagPingTestType INTEGER,
|
|
cldccDiagPingTestReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagPingTestType OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER {
|
|
dns-server(1),
|
|
default-gw(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to distinguish the type of
|
|
test.It can be a ping to the dns server or the
|
|
default gateway."
|
|
|
|
::= { cldccDiagPingTestReqEntry 1 }
|
|
|
|
cldccDiagPingTestReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this
|
|
table.To add a row in this table, createAndGo row status
|
|
will be used.To remove a row, this field will be set to
|
|
destroy."
|
|
|
|
::= { cldccDiagPingTestReqEntry 2 }
|
|
|
|
|
|
--- *******************************************************************
|
|
--- Dns Server Ping Test Response
|
|
--- *******************************************************************
|
|
|
|
cldccDiagPingTestRespTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagPingTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains response for Dns ping test
|
|
request."
|
|
|
|
::= { ciscoClientCcxDiagResponse 2 }
|
|
|
|
|
|
cldccDiagPingTestRespEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagPingTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table where each entry is
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagPingTestRespTable 2 }
|
|
|
|
|
|
CldccDiagPingTestRespEntry ::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagPingTestRespIPAddressType InetAddressType,
|
|
cldccDiagPingTestRespIPAddress InetAddress,
|
|
cldccDiagPingTestRespDestMacAddress MacAddress,
|
|
cldccDiagPingTestRespPingsSent Unsigned32,
|
|
cldccDiagPingTestRespPingsReceived Unsigned32,
|
|
cldccDiagPingTestRespMaxEchoTIme CiscoMilliSeconds,
|
|
cldccDiagPingTestRespMinEchoTIme CiscoMilliSeconds
|
|
}
|
|
|
|
cldccDiagPingTestRespIPAddressType OBJECT-TYPE
|
|
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the IP address
|
|
type of the destination of the ICMP echo
|
|
request frames."
|
|
|
|
::= { cldccDiagPingTestRespEntry 1 }
|
|
|
|
|
|
cldccDiagPingTestRespIPAddress OBJECT-TYPE
|
|
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the IP address
|
|
of the destination of the ICMP Echo Request
|
|
frames."
|
|
|
|
::= { cldccDiagPingTestRespEntry 2 }
|
|
|
|
|
|
cldccDiagPingTestRespDestMacAddress OBJECT-TYPE
|
|
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the MAC address
|
|
of the destination of the ICMP Echo Request
|
|
frames."
|
|
|
|
::= { cldccDiagPingTestRespEntry 3 }
|
|
|
|
|
|
cldccDiagPingTestRespPingsSent OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the number
|
|
of ICMP Echo Request frames sent."
|
|
|
|
::= { cldccDiagPingTestRespEntry 4 }
|
|
|
|
|
|
cldccDiagPingTestRespPingsReceived OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the number of
|
|
ICMP Echo Response frames received."
|
|
|
|
::= { cldccDiagPingTestRespEntry 5 }
|
|
|
|
|
|
cldccDiagPingTestRespMinEchoTIme OBJECT-TYPE
|
|
|
|
SYNTAX CiscoMilliSeconds
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the shortest time,in
|
|
milliseconds, between the transmission of an ICMP echo
|
|
request frame and the receipt of the corresponding ICMP
|
|
Echo Response frame."
|
|
|
|
::= { cldccDiagPingTestRespEntry 6 }
|
|
|
|
|
|
cldccDiagPingTestRespMaxEchoTIme OBJECT-TYPE
|
|
|
|
SYNTAX CiscoMilliSeconds
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the longest time
|
|
in milliseconds,between the transmission of an ICMP
|
|
echo Request between the transmission of an ICMP echo
|
|
request frame and the receipt of the corresponding
|
|
ICMP echo response frame.
|
|
ICMP echo request frames for which no corresponding
|
|
response is received shall be ignored in the
|
|
determination of this value."
|
|
|
|
::= { cldccDiagPingTestRespEntry 7 }
|
|
|
|
-- *******************************************************************
|
|
-- To determine that name resolution is functioning correctly,
|
|
-- the DNS test causes the client to attempt to resolve a network
|
|
-- name known to be resolvable.Upon receipt of the DNS name
|
|
-- resolution test request element, the client shall cause the
|
|
-- normally instantiated protocol stack to request the resolution
|
|
-- of the network (host) name provided in the element.For the duration
|
|
-- of the test, the client shall log the time of transmission and
|
|
-- reception of all packets, as well as the content of the entire
|
|
-- frame containing those packets, for subsequent transmission to the
|
|
-- AP.Upon completion of the DNS exchange, whether by successful
|
|
-- resolution of the network name or normal protocol timeout, the
|
|
-- client shall report the success or failure of the test to the AP.
|
|
-- *******************************************************************
|
|
|
|
--- Dns Name Resolution Request Table ----
|
|
|
|
cldccDiagDnsNameResolTestReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagDnsNameResolTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains Dns Name resolution request
|
|
params to be used for sending out a Diagnostic
|
|
request to a client for resolving a network name."
|
|
|
|
::= { ciscoClientCcxDiagRequest 3}
|
|
|
|
|
|
cldccDiagDnsNameResolTestReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagDnsNameResolTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table where each entry
|
|
is identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagDnsNameResolTestReqTable 1}
|
|
|
|
CldccDiagDnsNameResolTestReqEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagDnsNameResolTestReqNetworkName OCTET STRING,
|
|
cldccDiagDnsNameResolTestReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagDnsNameResolTestReqNetworkName OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING(SIZE(1..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the network which will be
|
|
resolved by the client and the result reported
|
|
to the controller."
|
|
|
|
::= { cldccDiagDnsNameResolTestReqEntry 1}
|
|
|
|
cldccDiagDnsNameResolTestReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this
|
|
table.To add a row in this table, createAndGo row
|
|
status will be used.To remove a row, this field
|
|
will be set to destroy."
|
|
|
|
::= { cldccDiagDnsNameResolTestReqEntry 2 }
|
|
|
|
--- Dns Name Resolution Response Table ----
|
|
|
|
cldccDiagDnsNameResolTestRespTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagDnsNameResolTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains Dns Name Resolution test results
|
|
sent by the client to the controller."
|
|
|
|
::= { ciscoClientCcxDiagResponse 3}
|
|
|
|
|
|
cldccDiagDnsNameResolTestRespEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagDnsNameResolTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table where each entry is
|
|
identified by a client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagDnsNameResolTestRespTable 1}
|
|
|
|
|
|
CldccDiagDnsNameResolTestRespEntry::=
|
|
|
|
SEQUENCE {
|
|
cldccDiagDnsNameResolTestRespIpAddressType InetAddressType,
|
|
cldccDiagDnsNameResolTestRespIpAddress InetAddress,
|
|
cldccDiagDnsNameResolTestRespServerName OCTET STRING
|
|
}
|
|
|
|
cldccDiagDnsNameResolTestRespIpAddressType OBJECT-TYPE
|
|
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is type of the ip address of the
|
|
DNS server whose name was sent in the
|
|
request."
|
|
|
|
::= { cldccDiagDnsNameResolTestRespEntry 1}
|
|
|
|
|
|
cldccDiagDnsNameResolTestRespIpAddress OBJECT-TYPE
|
|
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the ip address of the DNS server
|
|
whose name was sent in the request."
|
|
|
|
::= { cldccDiagDnsNameResolTestRespEntry 2}
|
|
|
|
cldccDiagDnsNameResolTestRespServerName OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING(SIZE(1..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the server whose
|
|
ip address was resolved."
|
|
|
|
::= { cldccDiagDnsNameResolTestRespEntry 3 }
|
|
|
|
|
|
cldccDiagAssociationTestReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagAssociationTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains association test request values
|
|
for various clients."
|
|
|
|
::= { ciscoClientCcxDiagRequest 4}
|
|
|
|
cldccDiagAssociationTestReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagAssociationTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= {cldccDiagAssociationTestReqTable 1}
|
|
|
|
CldccDiagAssociationTestReqEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagAssocTestReqBssid MacAddress,
|
|
cldccDiagAssocTestReqSsid OCTET STRING,
|
|
cldccDiagAssocTestReqChannel INTEGER,
|
|
cldccDiagAssocTestReqBand INTEGER,
|
|
cldccDiagAssocTestReqPhyType INTEGER,
|
|
cldccDiagAssocTestReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagAssocTestReqBssid OBJECT-TYPE
|
|
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the bssid of the AP which the client
|
|
has to try connecting to as a part of association
|
|
test."
|
|
|
|
::= { cldccDiagAssociationTestReqEntry 1 }
|
|
|
|
|
|
cldccDiagAssocTestReqSsid OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the SSID which the client has
|
|
to try connecting to as a part of association test."
|
|
|
|
::= { cldccDiagAssociationTestReqEntry 2 }
|
|
|
|
cldccDiagAssocTestReqChannel OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is channel number on which the client will
|
|
try to connect to the AP."
|
|
|
|
::= { cldccDiagAssociationTestReqEntry 3 }
|
|
|
|
cldccDiagAssocTestReqBand OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is band on which the client will
|
|
try to connect to the AP."
|
|
|
|
::= { cldccDiagAssociationTestReqEntry 4 }
|
|
|
|
cldccDiagAssocTestReqPhyType OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is phy type."
|
|
|
|
::= { cldccDiagAssociationTestReqEntry 5 }
|
|
|
|
cldccDiagAssocTestReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this
|
|
table.To add a row in this table, createAndGo row
|
|
status will be used.To remove a row, this field
|
|
will be set to destroy."
|
|
|
|
::= { cldccDiagAssociationTestReqEntry 6 }
|
|
|
|
-- Association Response Table
|
|
|
|
cldccDiagAssociationTestRespTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagAssociationTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains association test
|
|
response values for various clients."
|
|
|
|
::= { ciscoClientCcxDiagResponse 4 }
|
|
|
|
|
|
cldccDiagAssociationTestRespEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagAssociationTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagAssociationTestRespTable 4}
|
|
|
|
|
|
CldccDiagAssociationTestRespEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagAssociationTestRespIsAssocComplete TruthValue,
|
|
cldccDiagAssocTestRespReturnedStatus Unsigned32
|
|
}
|
|
|
|
cldccDiagAssociationTestRespIsAssocComplete OBJECT-TYPE
|
|
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of this field shall be 1 if the 802.11
|
|
association concluded normally,0 otherwise."
|
|
|
|
::= { cldccDiagAssociationTestRespEntry 1 }
|
|
|
|
|
|
cldccDiagAssocTestRespReturnedStatus OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of this field shall be the value returned
|
|
in the final 802.11 association response frame
|
|
during the test. "
|
|
|
|
::= { cldccDiagAssociationTestRespEntry 2 }
|
|
|
|
--- Authentication Request Table
|
|
|
|
cldccDiagAuthenticationTestReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagAuthenticationTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains association test request values
|
|
for various clients."
|
|
|
|
::= { ciscoClientCcxDiagRequest 5}
|
|
|
|
cldccDiagAuthenticationTestReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagAuthenticationTestReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagAuthenticationTestReqTable 1}
|
|
|
|
|
|
CldccDiagAuthenticationTestReqEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagAuthenticationTestReqBssid MacAddress,
|
|
cldccDiagAuthenticationTestReqProfileId Unsigned32,
|
|
cldccDiagAuthenticationTestReqChannel INTEGER,
|
|
cldccDiagAuthenticationTestReqBand INTEGER,
|
|
cldccDiagAuthenticationTestReqPhyType INTEGER,
|
|
cldccDiagAuthenticationTestReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagAuthenticationTestReqBssid OBJECT-TYPE
|
|
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the AP which the client has to try
|
|
connecting to as a part of authentication test."
|
|
|
|
::= { cldccDiagAuthenticationTestReqEntry 1 }
|
|
|
|
cldccDiagAuthenticationTestReqProfileId OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the ProfileId which the client has to try
|
|
connecting to as a part of authentication test."
|
|
|
|
::= { cldccDiagAuthenticationTestReqEntry 2 }
|
|
|
|
cldccDiagAuthenticationTestReqChannel OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the channel number."
|
|
|
|
::= { cldccDiagAuthenticationTestReqEntry 3 }
|
|
|
|
cldccDiagAuthenticationTestReqBand OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the band."
|
|
|
|
::= { cldccDiagAuthenticationTestReqEntry 5 }
|
|
|
|
cldccDiagAuthenticationTestReqPhyType OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the phy type."
|
|
|
|
::= { cldccDiagAuthenticationTestReqEntry 6 }
|
|
|
|
cldccDiagAuthenticationTestReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this
|
|
table.To add a row in this table,createAndGo row
|
|
status will be used.To remove a row, this field will
|
|
be set to destroy."
|
|
|
|
::= { cldccDiagAuthenticationTestReqEntry 9}
|
|
|
|
--- Authentication Respose Table
|
|
|
|
cldccDiagAuthenticationTestRespTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagAuthenticationTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains authentication test response
|
|
values for various clients."
|
|
|
|
::= { ciscoClientCcxDiagResponse 5}
|
|
|
|
cldccDiagAuthenticationTestRespEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagAuthenticationTestRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagAuthenticationTestRespTable 5}
|
|
|
|
|
|
CldccDiagAuthenticationTestRespEntry::=
|
|
|
|
SEQUENCE {
|
|
cldccDiagAuthenticationTestRespIsCompleted TruthValue,
|
|
cldccDiagAuthenticationTestRespReturnedStatus INTEGER,
|
|
cldccDiagAuthenticationTestRespEAPMethod
|
|
OCTET STRING
|
|
}
|
|
|
|
cldccDiagAuthenticationTestRespIsCompleted OBJECT-TYPE
|
|
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of this field shall be 1 if the 802.11
|
|
association concluded normally,0 otherwise."
|
|
|
|
::= { cldccDiagAuthenticationTestRespEntry 1 }
|
|
|
|
|
|
cldccDiagAuthenticationTestRespReturnedStatus OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of this field shall be the value returned in
|
|
the final 802.11 authentication response frame
|
|
during the test "
|
|
|
|
::= { cldccDiagAuthenticationTestRespEntry 2 }
|
|
|
|
|
|
cldccDiagAuthenticationTestRespEAPMethod OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING(SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of this field shall be the EAP method returned
|
|
in the final 802.11 authentication response frame
|
|
during the test. "
|
|
|
|
::= { cldccDiagAuthenticationTestRespEntry 3 }
|
|
|
|
|
|
cldccDiagMsgDisplayReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagMsgDisplayReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains message display request values for
|
|
various clients."
|
|
|
|
::= { ciscoClientCcxDiagRequest 6}
|
|
|
|
cldccDiagMsgDisplayReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagMsgDisplayReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagMsgDisplayReqTable 1}
|
|
|
|
CldccDiagMsgDisplayReqEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagMsgDisplayMsgType INTEGER,
|
|
cldccDiagMsgDisplayReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagMsgDisplayMsgType OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid-ssid(1),
|
|
invalid-network-settings(2),
|
|
wlan-capability-mismatch(3),
|
|
bad-credentials(4),
|
|
call-support(5),
|
|
problem-resolved(6),
|
|
resolution-incomplete(7),
|
|
try-again-later(8),
|
|
user-action-required(9),
|
|
trouble-shooting-refused-by-network(10),
|
|
retrieving-client-reports(11),
|
|
retrieving-client-logs(12),
|
|
retrieval-complete(13),
|
|
begining-association-test(14),
|
|
begining-dhcp-test(15),
|
|
begining-network-connectivity-test(16),
|
|
begining-dns-ping-test(17),
|
|
begining-name-resolution-test(18),
|
|
begining-dot1x-test(19),
|
|
redirecting-client-to-a-profile(20),
|
|
test-complete(21),
|
|
test-passed(22),
|
|
test-failed(23),
|
|
cancel-diag-channel-operation(24),
|
|
log-retrieval-refused(25),
|
|
client-report-retrieval-refused(26),
|
|
test-request-refused-by-client(27),
|
|
invalid-network-address(28),
|
|
known-problem-with-network(29),
|
|
scheduled-maint-period(30),
|
|
wlan-security-incorrect(31),
|
|
waln-encryption-incorrect(32),
|
|
wlan-auth-incorrect(33)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the type of message
|
|
to be displayed."
|
|
|
|
::= { cldccDiagMsgDisplayReqEntry 1 }
|
|
|
|
cldccDiagMsgDisplayReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this table.
|
|
To add a row in this table, createAndGo row status will
|
|
be used.To remove a row, this field will be set to
|
|
destroy."
|
|
|
|
::= { cldccDiagMsgDisplayReqEntry 2 }
|
|
|
|
cldccDiagProfileRedirectReqTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagProfileRedirectReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains profile redirect request values for
|
|
various clients."
|
|
|
|
::= { ciscoClientCcxDiagRequest 7}
|
|
|
|
cldccDiagProfileRedirectReqEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagProfileRedirectReqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagProfileRedirectReqTable 1}
|
|
|
|
CldccDiagProfileRedirectReqEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagProfileRedirectReqProfileId Unsigned32,
|
|
cldccDiagProfileRedirectReqRowStatus RowStatus
|
|
}
|
|
|
|
cldccDiagProfileRedirectReqProfileId OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the profile Id
|
|
to which the client should be redirected."
|
|
|
|
::= { cldccDiagProfileRedirectReqEntry 1 }
|
|
|
|
cldccDiagProfileRedirectReqRowStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to add/remove entries from this table.
|
|
To add a row in this table, createAndGo row status will
|
|
be used.To remove a row, this field will be set to
|
|
destroy."
|
|
|
|
::= { cldccDiagProfileRedirectReqEntry 2 }
|
|
|
|
|
|
cldccDiagMsgDisplayRespTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagMsgDisplayRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains message display request values
|
|
for various clients."
|
|
|
|
::= { ciscoClientCcxDiagResponse 6}
|
|
|
|
cldccDiagMsgDisplayRespEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagMsgDisplayRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table for each entry
|
|
identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= { cldccDiagMsgDisplayRespTable 1}
|
|
|
|
CldccDiagMsgDisplayRespEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagMsgDisplayRespString OCTET STRING
|
|
}
|
|
|
|
cldccDiagMsgDisplayRespString OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is string which was sent to the client for display."
|
|
|
|
::= { cldccDiagMsgDisplayRespEntry 1 }
|
|
|
|
|
|
cldccDiagTestLoggedFrameTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagTestLoggedFrameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains logged frame data."
|
|
|
|
::= { ciscoClientCcxDiagResponse 8 }
|
|
|
|
cldccDiagTestLoggedFrameEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagTestLoggedFrameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table where each entry
|
|
is identified by the client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress,
|
|
cldccDiagTestLoggedFrameIndex
|
|
}
|
|
|
|
::= { cldccDiagTestLoggedFrameTable 1}
|
|
|
|
|
|
CldccDiagTestLoggedFrameEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagTestLoggedFrameIndex Unsigned32,
|
|
cldccDiagTestLoggedFrameDirection INTEGER,
|
|
cldccDiagTestLoggedFrameTimeStamp TimeStamp,
|
|
cldccDiagTestLoggedFrameData OCTET STRING
|
|
}
|
|
|
|
cldccDiagTestLoggedFrameIndex OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the ordinal
|
|
value of the logged frame."
|
|
|
|
::= { cldccDiagTestLoggedFrameEntry 1 }
|
|
|
|
|
|
cldccDiagTestLoggedFrameDirection OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
{
|
|
up(0),
|
|
down(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be zero,
|
|
when the logged frame in the Frame Content field
|
|
is sent from (transmitted by) the client.
|
|
It shall be one, otherwise."
|
|
|
|
::= { cldccDiagTestLoggedFrameEntry 2}
|
|
|
|
|
|
cldccDiagTestLoggedFrameTimeStamp OBJECT-TYPE
|
|
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the
|
|
timestamp value of the logged frame."
|
|
|
|
::= { cldccDiagTestLoggedFrameEntry 3 }
|
|
|
|
|
|
cldccDiagTestLoggedFrameData OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING(SIZE(1..4096))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this field shall be the actual
|
|
frame that was transmitted or received."
|
|
|
|
::= { cldccDiagTestLoggedFrameEntry 4}
|
|
|
|
cldccDiagTestStatusTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF CldccDiagTestStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the status params for
|
|
all the tests performed on the client."
|
|
|
|
::= { ciscoClientCcxDiagStatus 1}
|
|
|
|
cldccDiagTestStatusEntry OBJECT-TYPE
|
|
|
|
SYNTAX CldccDiagTestStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in the table identified by the
|
|
client mac address."
|
|
INDEX
|
|
{
|
|
cldcClientMacAddress
|
|
}
|
|
|
|
::= {cldccDiagTestStatusTable 1}
|
|
|
|
|
|
CldccDiagTestStatusEntry::=
|
|
|
|
SEQUENCE
|
|
{
|
|
cldccDiagTestLastTestStatus CiscoLwappCcxDiagTestStatus,
|
|
cldccDiagTestLastResponseStatus CiscoLwappCcxDiagResponseStatus
|
|
}
|
|
|
|
cldccDiagTestLastTestStatus OBJECT-TYPE
|
|
|
|
SYNTAX CiscoLwappCcxDiagTestStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to represent the status of the
|
|
last test performed."
|
|
|
|
::= { cldccDiagTestStatusEntry 1 }
|
|
|
|
cldccDiagTestLastResponseStatus OBJECT-TYPE
|
|
|
|
SYNTAX CiscoLwappCcxDiagResponseStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to represent the response of the
|
|
last test performed."
|
|
|
|
::= { cldccDiagTestStatusEntry 2 }
|
|
|
|
|
|
--********************************************************************
|
|
--* Notification objects
|
|
--********************************************************************
|
|
|
|
cldccDiagClientMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the macaddress of the client
|
|
associated to the diagnostic WLAN. "
|
|
::= { ciscoLwappDot11CcxClientDiagMIBNotifObjs 1 }
|
|
|
|
cldccDiagAssocReasonCode OBJECT-TYPE
|
|
SYNTAX CLDot11ClientDiagAssocReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the reason code for which
|
|
the client has associated the diagnostic WLAN."
|
|
::= { ciscoLwappDot11CcxClientDiagMIBNotifObjs 2 }
|
|
|
|
--********************************************************************
|
|
--* Notifications
|
|
--********************************************************************
|
|
|
|
cldccDiagClientAssociatedToDiagWlan NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
cldccDiagClientMacAddress,
|
|
cldccDiagAssocReasonCode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when a client associates
|
|
to a diagnostic WLAN. "
|
|
::= { ciscoLwappDot11CcxClientDiagMIBNotifs 1 }
|
|
|
|
END
|