2218 lines
75 KiB
Plaintext
2218 lines
75 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB: MIB for limiting resources
|
|
--
|
|
-- August 2005, Subrahmanya Hegde
|
|
--
|
|
-- Copyright (c) 2005-2013 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Gauge32,
|
|
Counter32,
|
|
Counter64,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue,
|
|
TEXTUAL-CONVENTION,
|
|
RowStatus,
|
|
StorageType,
|
|
TimeStamp
|
|
FROM SNMPv2-TC
|
|
entPhysicalIndex
|
|
FROM ENTITY-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoL4L7moduleResourceLimitMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201302200000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-l4l7security@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module for managing resource classes
|
|
and configuring limits(max/min) to different
|
|
resources. The resource referenced in this MIB
|
|
are in addition to resource information availale
|
|
in other MIBs. This MIB is applicable to
|
|
L4-L7 modules which supports managing
|
|
resource limits using a centralized approach.
|
|
The resources (but not limited to) configured are
|
|
of following categories:
|
|
- TCP/IP Connections
|
|
- MAC Addresses
|
|
- syslog buffer, ACL Memmory
|
|
- NAT Translations etc
|
|
|
|
ciscoL4L7ResourceClassTable is used for adding/deleting
|
|
resource classes. Resource class is identified
|
|
by a name to which limits of multiple resources can
|
|
be configured.
|
|
|
|
ciscoL4L7ResourceLimitTable is used for adding/deleting
|
|
limits to resources in a resource class. This limit
|
|
is either maximum value and/or minimal value.
|
|
|
|
ciscoL4L7ResourceRateLimitTable is used for adding/deleting
|
|
rate limits to resources in a resource class.
|
|
|
|
Terminologies used:
|
|
ARP - Address Resolution Protocol.
|
|
ACL - Access Control List.
|
|
NAT - Network Address Translation.
|
|
NBAR - Network Based Application Recognition.
|
|
BPDU - Bridge Protocol Data Unit."
|
|
REVISION "201302200000Z"
|
|
DESCRIPTION
|
|
"Added the following two enum names to CiscoResourceLimitType
|
|
TC:
|
|
- cpu
|
|
- memory
|
|
Added the following groups:
|
|
- ciscoL4L7ResourceNotifGroupRev2
|
|
- ciscoL4L7ResourceNotifOnlyObjectsGroupExt
|
|
Deprecated ciscoL4L7ResourceNotifGroupRev1;
|
|
Updated the DESCRIOTION of the following objects:
|
|
- clrResourceRateLimitReachedNotifEnabled
|
|
- clrResourceLimitReachedNotifEnabled"
|
|
REVISION "201209200000Z"
|
|
DESCRIPTION
|
|
"Added the following groups
|
|
- ciscoL4L7ResourceNotifGroupRev1
|
|
- ciscoL4L7ResourceNotifOnlyObjectsGroup
|
|
|
|
Deprecated the following groups
|
|
- ciscoL4L7ResourceNotifGroup
|
|
|
|
Added the following compliance
|
|
- ciscoL4L7ResourceLimitComplianceRev6"
|
|
REVISION "201106100000Z"
|
|
DESCRIPTION
|
|
"-Added following OBJECT-TYPEs in table
|
|
ciscoL4L7BufferUtilizationTable.
|
|
crlExternalBufferUsageValue
|
|
crlExternalPercentageBufferUsage
|
|
crlExternalPercentageBufferUsageDisplay
|
|
|
|
-Deprecated OBJECT-GROUP
|
|
ciscoL4L7BufferUtilizationGroup.
|
|
|
|
-Added OBJECT-GROUP
|
|
ciscoL4L7BufferUtilizationGroupRev1.
|
|
|
|
-Deprecated MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev4.
|
|
|
|
-Added MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev5."
|
|
REVISION "201104150000Z"
|
|
DESCRIPTION
|
|
"- Added new table ciscoL4L7NpCpuUtilTable.
|
|
|
|
- Added OBJECT-GROUP ciscoL4L7NpCpuUtilizationGroup.
|
|
|
|
- Deprecated MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev3.
|
|
|
|
- Added MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev4."
|
|
REVISION "201012060000Z"
|
|
DESCRIPTION
|
|
"- Added TEXTUAL-CONVENTION CiscoBufferUtilPercentage.
|
|
|
|
- Added table ciscoL4L7BufferUtilizationTable.
|
|
|
|
- Added an OBJECT-GROUP ciscoL4L7BufferUtilizationGroup.
|
|
|
|
- Deprecated MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev2.
|
|
|
|
- Added MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev3."
|
|
REVISION "200803070000Z"
|
|
DESCRIPTION
|
|
"- Added TEXTUAL-CONVENTION CiscoResourceType.
|
|
|
|
- Added table ciscoL4L7ResourceUsageSummaryTable.
|
|
|
|
- Added an OBJECT-GROUP
|
|
ciscoL4L7ResourceUsageSummaryGroup.
|
|
|
|
- Deprecated MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev1.
|
|
|
|
- Added MODULE-COMPLIANCE
|
|
ciscoL4L7ResourceLimitComplianceRev2."
|
|
REVISION "200802070000Z"
|
|
DESCRIPTION
|
|
"- Added following enumerations in CiscoRateLimitResourceType
|
|
sslConnections (9)
|
|
mgmtBandwidth (10)
|
|
throughput (11)
|
|
missedMac (12)
|
|
httpCompression (13)
|
|
|
|
- Updated the description of bandwidth(4) enumeration in
|
|
CiscoRateLimitResourceType."
|
|
REVISION "200606190000Z"
|
|
DESCRIPTION
|
|
"- Added following enumerations in CiscoResourceLimitType
|
|
hosts (15)
|
|
ipsecSessions (16)
|
|
asdmSessions (17)
|
|
sshSessions (18)
|
|
telnetSessions (19)
|
|
|
|
- Added following objects in ciscoL4L7ResourceLimitTable
|
|
crlResourceLimitCurrentUsage
|
|
crlResourceLimitPeakUsage
|
|
crlResourceLimitReqsDeniedCount
|
|
|
|
- Added following objects in ciscoL4L7RateLimitTable
|
|
crlRateLimitResourceCurrentUsage
|
|
crlRateLimitResourcePeakUsage
|
|
crlRateLimitResourceReqsDeniedCount
|
|
|
|
- Added following objects:
|
|
clrResourceLimitReachedNotifEnabled
|
|
clrResourceRateLimitReachedNotifEnabled
|
|
|
|
- Added following Notification objects
|
|
clrResourceLimitReached
|
|
clrResourceRateLimitReached
|
|
|
|
- Added following in Compliance/Conformance
|
|
ciscoL4L7ResourceLimitComplianceRev1."
|
|
REVISION "200508050000Z"
|
|
DESCRIPTION
|
|
"Initial version of the MIB module."
|
|
::= { ciscoMgmt 480 }
|
|
|
|
|
|
ciscoL4L7ResourceLimitNotifs OBJECT IDENTIFIER
|
|
::= { ciscoL4L7moduleResourceLimitMIB 0 }
|
|
|
|
ciscoL4L7ResourceLimitMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoL4L7moduleResourceLimitMIB 1 }
|
|
|
|
ciscoResourceLimitMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoL4L7moduleResourceLimitMIB 2 }
|
|
|
|
crlResource OBJECT IDENTIFIER
|
|
::= { ciscoL4L7ResourceLimitMIBObjects 1 }
|
|
|
|
crlNotificationObjects OBJECT IDENTIFIER
|
|
::= { ciscoL4L7ResourceLimitMIBObjects 2 }
|
|
|
|
crlNotificationOnlyObjects OBJECT IDENTIFIER
|
|
::= { ciscoL4L7ResourceLimitMIBObjects 3 }
|
|
|
|
|
|
CiscoResourceClass ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention is used for representing
|
|
resource classes. A resource class is identified by
|
|
a name preferably in human readable form. This resource
|
|
class is used for identifying different type of resources.
|
|
The resource class can represent single resource type or
|
|
multiple resource type.
|
|
Resource category examples:
|
|
memory, connections
|
|
NAT(network address translation) translations,
|
|
number of syslog messages etc."
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
|
|
CiscoResourceLimitType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the resource type.
|
|
The possible values are :
|
|
all (1) : This is not a resource. However
|
|
this value acts as the wild card
|
|
value to set all the resources
|
|
at the same time. If an entry
|
|
exists with this value, then
|
|
for all the resources that are
|
|
not configured in this table will
|
|
have the value specified in this
|
|
entry.
|
|
macAddresses(2) : The number of MAC addresses allowed in
|
|
the MAC address table.
|
|
concurrentConns (3) : Concurrent TCP/UDP connections that are
|
|
supported. Connections exist between
|
|
any two hosts. This is applicable
|
|
for through the box connections only.
|
|
mgmtConnections (4) : This is applicable for to-the-box
|
|
traffic only.
|
|
proxyConns (5) : Sticky connections limit traffic to
|
|
the individual real servers by allowing
|
|
multiple connections from the same client
|
|
|
|
to stick (or attach) to the same real
|
|
server using source IP addresses,
|
|
source IP subnets, cookies, and the
|
|
secure socket layer (SSL) or
|
|
by redirecting these connections using
|
|
Hypertext Transfer Protocol (HTTP)
|
|
redirect messages.
|
|
probes (6) : the number of health probes.
|
|
stickyEntries (7) : the number of sticky entries.
|
|
This refers to statically configured
|
|
entries and dynamically created ones.
|
|
It represents the pool of entries
|
|
available for use/re-use.
|
|
natTranslations (8) : the number of NAT Translations.
|
|
regexState (9) : Regular expression state.
|
|
Regex states are nodes in the
|
|
regular expression state graph,
|
|
used for matching and sticking on HTTP
|
|
fields such as URL, header, cookies.
|
|
aclMemory (10) : Memory that is allocated for managing
|
|
ACLs.
|
|
ipReassemBuffer (11) : buffer that is allocated for IP
|
|
Reassembly.
|
|
syslogBuffer (12) : buffer that is allocated for syslog
|
|
messages that can be logged in the
|
|
system.
|
|
tcpOOOBuffer (13) : buffer that is allocated for TCP Out Of
|
|
Order packets.
|
|
sslConnections (14) : The number of SSL Connections.
|
|
hosts (15) : Number of hosts allowed through the
|
|
system.
|
|
ipsecSessions (16) : Number of IPSec management sessions.
|
|
asdmSessions (17) : Number of ASDM management sessions.
|
|
sshSessions (18) : Number of SSH management sessions.
|
|
telnetSessions (19) : Number of Telnet management sessions.
|
|
cpu (20) : CPU utilization by the system.
|
|
memory (21) : Memory utilization by the system."
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
macAddresses(2),
|
|
concurrentConns(3),
|
|
mgmtConnections(4),
|
|
proxyConns(5),
|
|
probes(6),
|
|
stickyEntries(7),
|
|
natTranslations(8),
|
|
regexState(9),
|
|
aclMemory(10),
|
|
syslogBuffer(11),
|
|
ipReassemBuffer(12),
|
|
tcpOOOBuffer(13),
|
|
sslConnections(14),
|
|
hosts(15),
|
|
ipsecSessions(16),
|
|
asdmSessions(17),
|
|
sshSessions(18),
|
|
telnetSessions(19),
|
|
cpu(20),
|
|
memory(21)
|
|
}
|
|
|
|
CiscoRateLimitResourceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the resource type
|
|
for which rate limiting needs to be done.
|
|
The value for rate limiting is specified
|
|
in crlRateLimitResourceMin and
|
|
crlRateLimitResourceMax.
|
|
|
|
The possible value(s) are :
|
|
all (1) : This value represents a wildcard
|
|
value to mean all the resources.
|
|
arpRequestsXmt (2) : ARP requests generated per second
|
|
arpResponses (3) : ARP responses to received ARP requests
|
|
per second.
|
|
bandwidth (4) : Bandwidth of the card in bytes
|
|
per second.
|
|
connections (5) : connections per second.
|
|
appInspections (6) : application inspections per second.
|
|
syslog (7) : syslog messages per second.
|
|
sslBandwidth (8) : SSL bandwidth in bytes per second.
|
|
sslConnections (9) : SSL connections per second.
|
|
mgmtBandwidth (10): Management (to-the-ACE) traffic
|
|
in bytes per second.
|
|
throughput (11): User (through-the-ACE) traffic
|
|
in bytes per second.
|
|
missedMac (12): Number of ARP resolution requests
|
|
in packets per second.
|
|
httpCompression (13): Compression rate for HTTP traffic
|
|
in bytes per second."
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
arpRequestsXmt(2),
|
|
arpResponses(3),
|
|
bandwidth(4),
|
|
connections(5),
|
|
appInspections(6),
|
|
syslog(7),
|
|
sslBandwidth(8),
|
|
sslConnections(9),
|
|
mgmtBandwidth(10),
|
|
throughput(11),
|
|
missedMac(12),
|
|
httpCompression(13)
|
|
}
|
|
|
|
CiscoResourceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a resource type.
|
|
|
|
The possible values for this object are:
|
|
|
|
lMacAddresses (1) : Refer to 'macAddresses' in
|
|
CiscoResourceLimitType.
|
|
lConcurrentConns (2) : Refer to 'concurrentConns' in
|
|
CiscoResourceLimitType.
|
|
lMgmtConnections (3) : Refer to 'mgmtConnections' in
|
|
CiscoResourceLimitType.
|
|
lProxyConns (4) : Refer to 'proxyConns' in
|
|
CiscoResourceLimitType.
|
|
lProbes (5) : Refer to 'probes' in
|
|
CiscoResourceLimitType.
|
|
lStickyEntries (6) : Refer to 'stickyEntries' in
|
|
CiscoResourceLimitType.
|
|
lNatTranslations (7) : Refer to 'natTranslations' in
|
|
CiscoResourceLimitType.
|
|
lRegexState (8) : Refer to 'regexState' in
|
|
CiscoResourceLimitType.
|
|
lAclMemory (9) : Refer to 'aclMemory' in
|
|
CiscoResourceLimitType.
|
|
lIpReassemBuffer (10) : Refer to 'ipReassemBuffer' in
|
|
CiscoResourceLimitType.
|
|
lSyslogBuffer (11) : Refer to 'syslogBuffer' in
|
|
CiscoResourceLimitType.
|
|
lTcpOOOBuffer (12) : Refer to 'tcpOOOBuffer' in
|
|
CiscoResourceLimitType.
|
|
lSslConnections (13) : Refer to 'sslConnections' in
|
|
CiscoResourceLimitType.
|
|
lHosts (14) : Refer to 'hosts' in
|
|
CiscoResourceLimitType.
|
|
lIpsecSessions (15) : Refer to 'ipsecSessions' in
|
|
CiscoResourceLimitType.
|
|
lAsdmSessions (16) : Refer to 'asdmSessions' in
|
|
CiscoResourceLimitType.
|
|
lSshSessions (17) : Refer to 'sshSessions' in
|
|
CiscoResourceLimitType.
|
|
lTelnetSessions (18) : Refer to 'telnetSessions' in
|
|
CiscoResourceLimitType.
|
|
rlArpRequestsXmt (19) : Refer to 'arpRequestsXmt' in
|
|
CiscoRateLimitResourceType.
|
|
rlArpResponses (20) : Refer to 'arpResponses' in
|
|
CiscoRateLimitResourceType.
|
|
rlBandwidth (21) : Refer to 'bandwidth' in
|
|
CiscoRateLimitResourceType.
|
|
rlConnections (22) : Refer to 'connections' in
|
|
CiscoRateLimitResourceType.
|
|
rlAppInspections (23) : Refer to 'appInspections' in
|
|
CiscoRateLimitResourceType.
|
|
rlSyslog (24) : Refer to 'syslog' in
|
|
CiscoRateLimitResourceType.
|
|
rlSslBandwidth (25) : Refer to 'sslBandwidth' in
|
|
CiscoRateLimitResourceType.
|
|
rlSslConnections (26) : Refer to 'sslConnections' in
|
|
CiscoRateLimitResourceType.
|
|
rlMgmtBandwidth (27) : Refer to 'mgmtBandwidth' in
|
|
CiscoRateLimitResourceType.
|
|
rlThroughput (28) : Refer to 'throughput' in
|
|
CiscoRateLimitResourceType.
|
|
rlMissedMac (29) : Refer to 'missedMac' in
|
|
CiscoRateLimitResourceType.
|
|
rlHttpCompression (30) : Refer to 'httpCompression' in
|
|
CiscoRateLimitResourceType."
|
|
SYNTAX INTEGER {
|
|
lMacAddresses(1),
|
|
lConcurrentConns(2),
|
|
lMgmtConnections(3),
|
|
lProxyConns(4),
|
|
lProbes(5),
|
|
lStickyEntries(6),
|
|
lNatTranslations(7),
|
|
lRegexState(8),
|
|
lAclMemory(9),
|
|
lIpReassemBuffer(10),
|
|
lSyslogBuffer(11),
|
|
lTcpOOOBuffer(12),
|
|
lSslConnections(13),
|
|
lHosts(14),
|
|
lIpsecSessions(15),
|
|
lAsdmSessions(16),
|
|
lSshSessions(17),
|
|
lTelnetSessions(18),
|
|
rlArpRequestsXmt(19),
|
|
rlArpResponses(20),
|
|
rlBandwidth(21),
|
|
rlConnections(22),
|
|
rlAppInspections(23),
|
|
rlSyslog(24),
|
|
rlSslBandwidth(25),
|
|
rlSslConnections(26),
|
|
rlMgmtBandwidth(27),
|
|
rlThroughput(28),
|
|
rlMissedMac(29),
|
|
rlHttpCompression(30)
|
|
}
|
|
|
|
CiscoBufferUtilPercentage ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d-2"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer utilization as a percentage and should
|
|
be presented in using xx.yy format."
|
|
SYNTAX INTEGER (0..10000)
|
|
|
|
ciscoL4L7ResourceClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoL4L7ResourceClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per resource class.
|
|
This table is used for adding/deleting the resource
|
|
class in the system. A resource class can contain
|
|
limits for different category of resources and
|
|
these resources can be configured using other tables."
|
|
::= { crlResource 1 }
|
|
|
|
ciscoL4L7ResourceClassEntry OBJECT-TYPE
|
|
SYNTAX CiscoL4L7ResourceClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular resource class.
|
|
Each entry provides the name of class.
|
|
The entPhysicalIndex refers to resource manageable
|
|
component in entPhysicalTable with
|
|
entPhysicalClass -> 'module'."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
crlResourceClassName
|
|
}
|
|
::= { ciscoL4L7ResourceClassTable 1 }
|
|
|
|
CiscoL4L7ResourceClassEntry ::= SEQUENCE {
|
|
crlResourceClassName CiscoResourceClass,
|
|
crlResourceClassStorageType StorageType,
|
|
crlResourceClassRowStatus RowStatus
|
|
}
|
|
|
|
crlResourceClassName OBJECT-TYPE
|
|
SYNTAX CiscoResourceClass
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a unique resource class
|
|
in a resource manageable component identified
|
|
by entPhysicalIndex."
|
|
::= { ciscoL4L7ResourceClassEntry 1 }
|
|
|
|
crlResourceClassStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write-access to any columnar objects in the row.
|
|
This object can not be modified when the value of
|
|
crlResourceClassRowStatus is 'active'."
|
|
DEFVAL { nonVolatile }
|
|
::= { ciscoL4L7ResourceClassEntry 2 }
|
|
|
|
crlResourceClassRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for adding/deleting
|
|
resource classes in a system."
|
|
::= { ciscoL4L7ResourceClassEntry 3 }
|
|
|
|
|
|
|
|
ciscoL4L7ResourceLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoL4L7ResourceLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for adding resource limits
|
|
to resources in a resource class."
|
|
::= { crlResource 2 }
|
|
|
|
ciscoL4L7ResourceLimitEntry OBJECT-TYPE
|
|
SYNTAX CiscoL4L7ResourceLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular resource in a resource
|
|
class. Each entry provides the type of resource,
|
|
the limit that is supported for that resource
|
|
and type of the limit value."
|
|
INDEX {
|
|
crlResourceClassName,
|
|
crlResourceLimitType
|
|
}
|
|
::= { ciscoL4L7ResourceLimitTable 1 }
|
|
|
|
CiscoL4L7ResourceLimitEntry ::= SEQUENCE {
|
|
crlResourceLimitType CiscoResourceLimitType,
|
|
crlResourceLimitValueType INTEGER,
|
|
crlResourceLimitMin Unsigned32,
|
|
crlResourceLimitMax Unsigned32,
|
|
crlResourceLimitStorageType StorageType,
|
|
crlResourceLimitRowStatus RowStatus,
|
|
crlResourceLimitCurrentUsage Gauge32,
|
|
crlResourceLimitPeakUsage Gauge32,
|
|
crlResourceLimitReqsDeniedCount Counter32
|
|
}
|
|
|
|
crlResourceLimitType OBJECT-TYPE
|
|
SYNTAX CiscoResourceLimitType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of
|
|
resource in a resource class identified
|
|
by crlResourceClassName."
|
|
::= { ciscoL4L7ResourceLimitEntry 2 }
|
|
|
|
crlResourceLimitValueType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
absolute(1),
|
|
percentage(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of value specified
|
|
in crlResourceLimitMax and crlResourceLimitMin objects.
|
|
The possible values are :
|
|
absolute (1) : the value represents an absolute number.
|
|
percentage (2) : the value represents the % of the total
|
|
available for the system. In this case
|
|
only crlResourceLimitMax object is
|
|
applicable."
|
|
DEFVAL { percentage }
|
|
::= { ciscoL4L7ResourceLimitEntry 3 }
|
|
|
|
crlResourceLimitMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the rate limit allowed for
|
|
the resource identified by 'ciscoResourceLimitType'.
|
|
This value cannot be greater than the value
|
|
specified in ciscoResourceLimitMax.
|
|
The value zero signifies that this object is
|
|
not applicable to the resource."
|
|
DEFVAL { 0 }
|
|
::= { ciscoL4L7ResourceLimitEntry 4 }
|
|
|
|
crlResourceLimitMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the limit allowed for
|
|
the resource identified by 'ciscoResourceLimitType'.
|
|
The value zero specifies that this resource
|
|
can be used until the system limit reached."
|
|
DEFVAL { 0 }
|
|
::= { ciscoL4L7ResourceLimitEntry 5 }
|
|
|
|
crlResourceLimitStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write-access to any columnar objects in the row.
|
|
This object cannot be modified when the value of
|
|
crlResourceLimitRowStatus is 'active'."
|
|
DEFVAL { nonVolatile }
|
|
::= { ciscoL4L7ResourceLimitEntry 6 }
|
|
|
|
crlResourceLimitRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for adding/deleting
|
|
entries in this table."
|
|
::= { ciscoL4L7ResourceLimitEntry 7 }
|
|
|
|
crlResourceLimitCurrentUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of resources identified by
|
|
'ciscoResourceLimitType', that are currently being used in
|
|
the system."
|
|
::= { ciscoL4L7ResourceLimitEntry 8 }
|
|
|
|
crlResourceLimitPeakUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peak usage of the resource
|
|
identified by 'ciscoResourceLimitType' since the statistics
|
|
were last cleared either through the command line interface or
|
|
bacause of the system reboot."
|
|
::= { ciscoL4L7ResourceLimitEntry 9 }
|
|
|
|
crlResourceLimitReqsDeniedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of resource requests that
|
|
were denied when the configured resource limit is exceeded
|
|
for the resource identified by 'ciscoResourceLimitType'.
|
|
|
|
The value for resource limiting is specified
|
|
in 'crlResourceLimitMax'."
|
|
::= { ciscoL4L7ResourceLimitEntry 10 }
|
|
|
|
|
|
|
|
ciscoL4L7ResourceRateLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoL4L7ResourceRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for adding/deleting
|
|
the rate limiting of the resources in a
|
|
resource class."
|
|
::= { crlResource 4 }
|
|
|
|
ciscoL4L7ResourceRateLimitEntry OBJECT-TYPE
|
|
SYNTAX CiscoL4L7ResourceRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an entry in the table
|
|
Each entry provides the name of group, the rate
|
|
configured for a resource."
|
|
INDEX {
|
|
crlResourceClassName,
|
|
crlRateLimitResourceType
|
|
}
|
|
::= { ciscoL4L7ResourceRateLimitTable 1 }
|
|
|
|
CiscoL4L7ResourceRateLimitEntry ::= SEQUENCE {
|
|
crlRateLimitResourceType CiscoRateLimitResourceType,
|
|
crlRateLimitResourceMin Unsigned32,
|
|
crlRateLimitResourceMax Unsigned32,
|
|
crlRateLimitResourceStorageType StorageType,
|
|
crlRateLimitResourceRowStatus RowStatus,
|
|
crlRateLimitResourceCurrentUsage Gauge32,
|
|
crlRateLimitResourcePeakUsage Gauge32,
|
|
crlRateLimitResourceReqsDeniedCount Counter32
|
|
}
|
|
|
|
crlRateLimitResourceType OBJECT-TYPE
|
|
SYNTAX CiscoRateLimitResourceType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the resource type
|
|
for which rate limiting needs to be done.
|
|
The value for rate limiting is specified
|
|
in crlRateLimitResourceMin and
|
|
crlRateLimitResourceMax."
|
|
::= { ciscoL4L7ResourceRateLimitEntry 1 }
|
|
|
|
crlRateLimitResourceMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the rate limit allowed for
|
|
the resource identified by 'crlRateLimitResourceType'.
|
|
This value cannot be greater than the value
|
|
specified in crlRateLimitResourceMax.
|
|
The value zero signifies that this object is
|
|
not applicable to the resource."
|
|
DEFVAL { 0 }
|
|
::= { ciscoL4L7ResourceRateLimitEntry 2 }
|
|
|
|
crlRateLimitResourceMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the limit allowed for
|
|
the resource identified by 'crlRateLimitResourceType'.
|
|
The value zero specifies that this resource
|
|
can be used until the system limit reached."
|
|
DEFVAL { 0 }
|
|
::= { ciscoL4L7ResourceRateLimitEntry 3 }
|
|
|
|
crlRateLimitResourceStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write-access to any columnar objects in the row.
|
|
This object cannot be modified when the value of
|
|
crlRateLimitResourceRowStatus is 'active'."
|
|
DEFVAL { nonVolatile }
|
|
::= { ciscoL4L7ResourceRateLimitEntry 4 }
|
|
|
|
crlRateLimitResourceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for adding/deleting
|
|
entries in this table. This object cannot
|
|
be set to 'active' until all the mandatory
|
|
objects have valid value."
|
|
::= { ciscoL4L7ResourceRateLimitEntry 5 }
|
|
|
|
crlRateLimitResourceCurrentUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of resources identified by
|
|
'crlRateLimitResourceType', that are currently being used in
|
|
the system."
|
|
::= { ciscoL4L7ResourceRateLimitEntry 6 }
|
|
|
|
crlRateLimitResourcePeakUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peak usage of the resource
|
|
identified by 'crlRateLimitResourceType' since the statistics
|
|
were last cleared either through the command line interface or
|
|
bacause of the system reboot."
|
|
::= { ciscoL4L7ResourceRateLimitEntry 7 }
|
|
|
|
crlRateLimitResourceReqsDeniedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of resource requests that
|
|
were denied when the configured rate limit is exceeded
|
|
for the resource identified by 'crlRateLimitResourceType'.
|
|
|
|
The value for rate limiting is specified in
|
|
'crlRateLimitResourceMax'."
|
|
::= { ciscoL4L7ResourceRateLimitEntry 8 }
|
|
|
|
|
|
|
|
ciscoL4L7ResourceUsageSummaryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoL4L7ResourceUsageSummaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the statistics for each resource type
|
|
in a system.
|
|
The resource usage statistics can be:
|
|
- current usage for the resource.
|
|
- peak usage for the resource.
|
|
- Number of times the resource request were denied when the
|
|
configured limit or rate-limit is exceeded for the resource."
|
|
::= { crlResource 5 }
|
|
|
|
ciscoL4L7ResourceUsageSummaryEntry OBJECT-TYPE
|
|
SYNTAX CiscoL4L7ResourceUsageSummaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in ciscoL4L7ResourceUsageSummaryTable. Each entry
|
|
provides the resource usage parameters in a system.
|
|
|
|
An entry is created when an entry is created in
|
|
either 'ciscoL4L7ResourceLimitTable' or
|
|
'ciscoL4L7ResourceRateLimitTable'.
|
|
|
|
An entry is deleted when an entry is deleted
|
|
from either 'ciscoL4L7ResourceLimitTable' or
|
|
'ciscoL4L7ResourceRateLimitTable'."
|
|
INDEX { crlResourceSummaryType }
|
|
::= { ciscoL4L7ResourceUsageSummaryTable 1 }
|
|
|
|
CiscoL4L7ResourceUsageSummaryEntry ::= SEQUENCE {
|
|
crlResourceSummaryType CiscoResourceType,
|
|
crlResourceSummaryCurrentUsage Gauge32,
|
|
crlResourceSummaryPeakUsage Gauge32,
|
|
crlResourceSummaryReqsDeniedCount Counter64,
|
|
crlResourceSummaryLastClearedTime TimeStamp,
|
|
crlResourceSummaryStorageType StorageType,
|
|
crlResourceSummaryRowStatus RowStatus
|
|
}
|
|
|
|
crlResourceSummaryType OBJECT-TYPE
|
|
SYNTAX CiscoResourceType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a type of resource in the system."
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 1 }
|
|
|
|
crlResourceSummaryCurrentUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current usage of the resource
|
|
in the system."
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 2 }
|
|
|
|
crlResourceSummaryPeakUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peak usage of the resource
|
|
in the system."
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 3 }
|
|
|
|
crlResourceSummaryReqsDeniedCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of resource requests
|
|
that were denied in the system when the configured
|
|
limit is exceeded for the resource.
|
|
|
|
The value for limiting is specified in 'crlResourceLimitMax'
|
|
and the value for rate limiting is specified in
|
|
'crlRateLimitResourceMax'."
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 4 }
|
|
|
|
crlResourceSummaryLastClearedTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the time when the value of the
|
|
object identified by 'crlResourceSummaryPeakUsage' is
|
|
last cleared or reset. A value of 0 (zero) signifies
|
|
that the value has not been cleared since the last
|
|
system reboot."
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 5 }
|
|
|
|
crlResourceSummaryStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write-access to any columnar objects in the row.
|
|
This object cannot be modified when the value of
|
|
'crlResourceSummaryRowStatus' is 'active'."
|
|
DEFVAL { nonVolatile }
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 6 }
|
|
|
|
crlResourceSummaryRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for adding/deleting
|
|
entries in this table. This object cannot
|
|
be set to 'active' until all the mandatory
|
|
objects have valid value."
|
|
::= { ciscoL4L7ResourceUsageSummaryEntry 7 }
|
|
|
|
|
|
-- Add table description here
|
|
|
|
ciscoL4L7BufferUtilizationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoL4L7BufferUtilizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the statistics for buffer utilization in
|
|
a system.
|
|
The buffer utilization statistics can be:
|
|
- absolute buffer usage value per network processor(NP).
|
|
- percentage buffer usage per network processor(NP)."
|
|
::= { crlResource 6 }
|
|
|
|
ciscoL4L7BufferUtilizationEntry OBJECT-TYPE
|
|
SYNTAX CiscoL4L7BufferUtilizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in ciscoL4L7BufferUtilizationTable. Each entry
|
|
provides the buffer usage in a system."
|
|
INDEX { clrNetworkProcessor }
|
|
::= { ciscoL4L7BufferUtilizationTable 1 }
|
|
|
|
CiscoL4L7BufferUtilizationEntry ::= SEQUENCE {
|
|
clrNetworkProcessor Unsigned32,
|
|
crlBufferUsageValue Gauge32,
|
|
crlPercentageBufferUsage CiscoBufferUtilPercentage,
|
|
crlPercentageBufferUsageDisplay SnmpAdminString,
|
|
crlExternalBufferUsageValue Gauge32,
|
|
crlExternalPercentageBufferUsage CiscoBufferUtilPercentage,
|
|
crlExternalPercentageBufferUsageDisplay SnmpAdminString
|
|
}
|
|
|
|
clrNetworkProcessor OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents network processor number(NP) in the
|
|
system."
|
|
::= { ciscoL4L7BufferUtilizationEntry 1 }
|
|
|
|
crlBufferUsageValue OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "buffers"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the absolute buffer usage in the
|
|
system."
|
|
::= { ciscoL4L7BufferUtilizationEntry 2 }
|
|
|
|
crlPercentageBufferUsage OBJECT-TYPE
|
|
SYNTAX CiscoBufferUtilPercentage
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the percentage buffer usage in the
|
|
the decimal format to allow historical information to be
|
|
collected."
|
|
::= { ciscoL4L7BufferUtilizationEntry 3 }
|
|
|
|
crlPercentageBufferUsageDisplay OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the percentage buffer usage in the
|
|
string format to all interactive access to simple display
|
|
format."
|
|
::= { ciscoL4L7BufferUtilizationEntry 4 }
|
|
|
|
crlExternalBufferUsageValue OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "buffers"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the absolute external buffer usage in
|
|
the system."
|
|
::= { ciscoL4L7BufferUtilizationEntry 5 }
|
|
|
|
crlExternalPercentageBufferUsage OBJECT-TYPE
|
|
SYNTAX CiscoBufferUtilPercentage
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the percentage external buffer usage
|
|
in the the decimal format to allow historical information to
|
|
be collected."
|
|
::= { ciscoL4L7BufferUtilizationEntry 6 }
|
|
|
|
crlExternalPercentageBufferUsageDisplay OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the percentage external buffer usage
|
|
in the string format to all interactive access to simple
|
|
display format."
|
|
::= { ciscoL4L7BufferUtilizationEntry 7 }
|
|
|
|
|
|
-- CPU UtilizationTable per NP
|
|
|
|
ciscoL4L7NpCpuUtilTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoL4L7NpCpuUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the CPU utilization statistics for each NP
|
|
(network processor) in the device."
|
|
::= { crlResource 7 }
|
|
|
|
ciscoL4L7NpCpuUtilEntry OBJECT-TYPE
|
|
SYNTAX CiscoL4L7NpCpuUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row contains the average CPU utilization of all
|
|
sub-processors for a network processor identified by its
|
|
clrNetworkProcessor value."
|
|
INDEX { clrNetworkProcessor }
|
|
::= { ciscoL4L7NpCpuUtilTable 1 }
|
|
|
|
CiscoL4L7NpCpuUtilEntry ::= SEQUENCE {
|
|
clrNpCpuUtilizationAverage Gauge32
|
|
}
|
|
|
|
clrNpCpuUtilizationAverage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the average CPU utilization of all
|
|
sub-processors belonged to a particular network processor at
|
|
that instance."
|
|
::= { ciscoL4L7NpCpuUtilEntry 1 }
|
|
|
|
|
|
|
|
-- notification control objects
|
|
|
|
clrResourceLimitReachedNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the generation of
|
|
'clrResourceLimitReachedNotifRev1' notification.
|
|
|
|
'true' Indicates that clrResourceLimitReachedNotifRev1
|
|
notification is to be generated when the
|
|
configured resource limit is reached.
|
|
|
|
'false' Indicates that clrResourceLimitReachedNotifRev1
|
|
notification generation is disabled."
|
|
DEFVAL { false }
|
|
::= { crlNotificationObjects 1 }
|
|
|
|
clrResourceRateLimitReachedNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the generation of
|
|
'clrResourceRateLimitReachedNotifRev1' notification.
|
|
|
|
'true' Indicates that clrResourceRateLimitReachedNotifRev1
|
|
notification is to be generated when the
|
|
configured resource rate limit is reached.
|
|
|
|
'false' Indicates that clrResourceRateLimitReachedNotifRev1
|
|
notification generation is disabled."
|
|
DEFVAL { false }
|
|
::= { crlNotificationObjects 2 }
|
|
|
|
crlNotifType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
risingHighThresh(1), -- Notification to indicate
|
|
-- that the current usage
|
|
-- exceeds the high threshold
|
|
fallingMinThresh(2), -- Notification to indicate
|
|
-- that the current usage
|
|
-- falls below the minimal threshold
|
|
fallingWatermarkThresh(3), -- Notification to
|
|
-- indicate that the
|
|
-- current usage falls
|
|
-- below the high
|
|
-- watermark threshold
|
|
risingWatermarkThresh(4) -- Notification to
|
|
-- indicate that the
|
|
-- current usage exceeds
|
|
-- the low watermark
|
|
-- threshold
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates type of notification."
|
|
::= { crlNotificationOnlyObjects 1 }
|
|
|
|
crlNotifContextOrSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
system(1),
|
|
context(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the notification sent is at the
|
|
system level or at the context level."
|
|
::= { crlNotificationOnlyObjects 2 }
|
|
|
|
crlNotifContextName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the context name associated
|
|
with notifications."
|
|
::= { crlNotificationOnlyObjects 3 }
|
|
|
|
crlNotifCurrentUsagePcnt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "percent"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current usage percent of the
|
|
resource associated with notifications."
|
|
::= { crlNotificationOnlyObjects 4 }
|
|
|
|
crlNotifMaxThresholdPcnt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum threshold percent
|
|
of the resource/rate associated with notifications. This object
|
|
is used to raise the risingHighThresh notification when the
|
|
current usage identified by crlNotifCurrentUsagePcnt exceeds
|
|
maximum threshold identified by crlNotifMaxThresholdPcnt."
|
|
::= { crlNotificationOnlyObjects 5 }
|
|
|
|
crlNotifWatermarkPcnt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the watermark threshold percent
|
|
of the resource/rate associated with notifications. This object
|
|
is used to raise the
|
|
risingWatermarkThresh/fallingWatermarkThresh notifications when
|
|
the current usage identified by crlNotifCurrentUsagePcnt exceeds
|
|
high or falls below watermark threshold identified by
|
|
crlNotifWatermarkPcnt."
|
|
::= { crlNotificationOnlyObjects 6 }
|
|
|
|
crlNotifMinThresholdPcnt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum threshold percent
|
|
of the resource/rate associated with notifications. This object
|
|
is used to raise the fallingWatermarkThresh notification
|
|
when the current usage identified by crlNotifCurrentUsagePcnt
|
|
falls below minimum threshold identified by
|
|
crlNotifMinThresholdPcnt."
|
|
::= { crlNotificationOnlyObjects 7 }
|
|
|
|
crlNotifSourceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
virtualIP(1), -- Object to indicate that the
|
|
--
|
|
-- notification is being raised for
|
|
-- virtual ip
|
|
realServer(2) -- Object to indicate that the
|
|
--
|
|
-- notification is being raised for
|
|
-- real server
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the notification sent is at the
|
|
real server level or at virtual ip level.
|
|
Rserver is a real server e.g. a linux machine which services
|
|
the
|
|
client requests.
|
|
Virtual IP is a IP address which is advertised to the outside
|
|
world from the Data Center for communication with the server."
|
|
::= { crlNotificationOnlyObjects 8 }
|
|
|
|
crlNotifRealServerName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the real server name associated
|
|
with notifications."
|
|
::= { crlNotificationOnlyObjects 9 }
|
|
|
|
crlNotifVirtualIPAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates type of the Virtual IP address i.e. IPv4
|
|
or IPv6."
|
|
::= { crlNotificationOnlyObjects 10 }
|
|
|
|
crlNotifVirtualIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Virtual IP (VIP) Adress associated
|
|
with notifications."
|
|
::= { crlNotificationOnlyObjects 11 }
|
|
|
|
-- notifications
|
|
|
|
clrResourceLimitReached NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
crlResourceLimitValueType,
|
|
crlResourceLimitMax
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This notification is generated when the configured resource
|
|
limit value specified in 'crlResourceLimitMax' is reached
|
|
for a particular resource. This resource is identified by
|
|
'crlResourceLimitType' in ciscoL4L7ResourceLimitTable.
|
|
clrResourceLimitReached object is superseded by
|
|
clrResourceLimitReachedNotif."
|
|
::= { ciscoL4L7ResourceLimitNotifs 1 }
|
|
|
|
clrResourceRateLimitReached NOTIFICATION-TYPE
|
|
OBJECTS { crlRateLimitResourceMax }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This notification is generated when the configured rate
|
|
limit value specified in 'crlRateLimitResourceMax' is reached
|
|
for a particular resource. This resource is identified by
|
|
'crlRateLimitResourceType' in ciscoL4L7ResourceRateLimitTable.
|
|
clrResourceRateLimitReached object is superseded by
|
|
clrResourceRateLimitReachedNotif."
|
|
::= { ciscoL4L7ResourceLimitNotifs 2 }
|
|
|
|
clrResourceLimitReachedNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
crlNotifType,
|
|
crlResourceLimitCurrentUsage,
|
|
crlResourceLimitMax,
|
|
crlResourceLimitMin,
|
|
crlNotifCurrentUsagePcnt,
|
|
crlNotifMaxThresholdPcnt,
|
|
crlNotifWatermarkPcnt,
|
|
crlNotifMinThresholdPcnt,
|
|
crlNotifContextOrSystem,
|
|
crlNotifContextName
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The notification will be generated when the current resource
|
|
usage identified by crlResourceLimitCurrentUsage exceeds/falls
|
|
below the user configured thresholds identified by
|
|
crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
|
|
crlNotifWatermarkPcnt.
|
|
Notifications will be generated on the following conditions
|
|
1. crlResourceLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt
|
|
2. crlResourceLimitCurrentUsage falls below high
|
|
crlNotifWatermarkPcnt
|
|
3. crlResourceLimitCurrentUsage falls below
|
|
crlNotifMinThresholdPcnt
|
|
4. crlResourceLimitCurrentUsage exceeds low
|
|
crlNotifWatermarkPcnt.
|
|
clrResourceLimitReachedNotif object is superseded by clrResourceLimitReachedNotifRev1."
|
|
::= { ciscoL4L7ResourceLimitNotifs 3 }
|
|
|
|
clrResourceRateLimitReachedNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
crlNotifType,
|
|
crlRateLimitResourceCurrentUsage,
|
|
crlRateLimitResourceMax,
|
|
crlRateLimitResourceMin,
|
|
crlNotifCurrentUsagePcnt,
|
|
crlNotifMaxThresholdPcnt,
|
|
crlNotifWatermarkPcnt,
|
|
crlNotifMinThresholdPcnt,
|
|
crlNotifContextOrSystem,
|
|
crlNotifContextName
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The notification will be generated when the current resource
|
|
rate usage identified by crlResourceRateLimitCurrentUsage
|
|
exceeds/falls below the user configured thresholds identified
|
|
by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
|
|
crlNotifWatermarkPcnt.
|
|
Notifications will be generated on the following conditions
|
|
1. crlResourceRateLimitCurrentUsage exceeds
|
|
crlNotifMaxThresholdPcnt
|
|
2. crlResourceRateLimitCurrentUsage falls below high
|
|
crlNotifWatermarkPcnt
|
|
3. crlResourceRateLimitCurrentUsage falls below
|
|
crlNotifMinThresholdPcnt
|
|
4. crlResourceRateLimitCurrentUsage exceeds low
|
|
crlNotifWatermarkPcnt
|
|
clrResourceRateLimitReachedNotif object is superseded by clrResourceRateLimitReachedNotifRev1."
|
|
::= { ciscoL4L7ResourceLimitNotifs 4 }
|
|
|
|
clrResourceRateLimitReachedNotifRev1 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
crlNotifType,
|
|
crlRateLimitResourceCurrentUsage,
|
|
crlRateLimitResourceMax,
|
|
crlRateLimitResourceMin,
|
|
crlNotifCurrentUsagePcnt,
|
|
crlNotifMaxThresholdPcnt,
|
|
crlNotifWatermarkPcnt,
|
|
crlNotifMinThresholdPcnt,
|
|
crlNotifContextOrSystem,
|
|
crlNotifContextName,
|
|
crlNotifSourceType,
|
|
crlNotifRealServerName,
|
|
crlNotifVirtualIPAddrType,
|
|
crlNotifVirtualIPAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification will be generated when the current resource
|
|
usage rate identified by crlResourceRateLimitCurrentUsage
|
|
exceeds/falls below the user configured thresholds identified
|
|
by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
|
|
crlNotifWatermarkPcnt.
|
|
Notifications will be generated on the following conditions
|
|
1. crlResourceRateLimitCurrentUsage exceeds
|
|
crlNotifMaxThresholdPcnt
|
|
2. crlResourceRateLimitCurrentUsage falls below high
|
|
crlNotifWatermarkPcnt
|
|
3. crlResourceRateLimitCurrentUsage falls below
|
|
crlNotifMinThresholdPcnt
|
|
4. crlResourceRateLimitCurrentUsage exceeds low
|
|
crlNotifWatermarkPcnt"
|
|
::= { ciscoL4L7ResourceLimitNotifs 5 }
|
|
|
|
clrResourceLimitReachedNotifRev1 NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
crlNotifType,
|
|
crlResourceLimitCurrentUsage,
|
|
crlResourceLimitMax,
|
|
crlResourceLimitMin,
|
|
crlNotifCurrentUsagePcnt,
|
|
crlNotifMaxThresholdPcnt,
|
|
crlNotifWatermarkPcnt,
|
|
crlNotifMinThresholdPcnt,
|
|
crlNotifContextOrSystem,
|
|
crlNotifContextName,
|
|
crlNotifSourceType,
|
|
crlNotifRealServerName,
|
|
crlNotifVirtualIPAddrType,
|
|
crlNotifVirtualIPAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification will be generated when the current resource
|
|
usage identified by crlResourceLimitCurrentUsage exceeds/falls
|
|
below the user configured thresholds identified by
|
|
crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
|
|
crlNotifWatermarkPcnt.
|
|
Notifications will be generated on the following conditions
|
|
1. crlResourceLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt
|
|
2. crlResourceLimitCurrentUsage falls below high
|
|
crlNotifWatermarkPcnt
|
|
3. crlResourceLimitCurrentUsage falls below
|
|
crlNotifMinThresholdPcnt
|
|
4. crlResourceLimitCurrentUsage exceeds low
|
|
crlNotifWatermarkPcnt."
|
|
::= { ciscoL4L7ResourceLimitNotifs 6 }
|
|
-- conformance information
|
|
|
|
ciscoL4L7ResourceLimitConformance OBJECT IDENTIFIER
|
|
::= { ciscoL4L7moduleResourceLimitMIB 3 }
|
|
|
|
ciscoL4L7ResourceLimitCompliances OBJECT IDENTIFIER
|
|
::= { ciscoL4L7ResourceLimitConformance 1 }
|
|
|
|
ciscoL4L7ResourceLimitGroups OBJECT IDENTIFIER
|
|
::= { ciscoL4L7ResourceLimitConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
ciscoL4L7ResourceLimitCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup
|
|
}
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
::= { ciscoL4L7ResourceLimitCompliances 1 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup
|
|
}
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
::= { ciscoL4L7ResourceLimitCompliances 2 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup
|
|
}
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceUsageSummaryGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limiting and/or rate limiting
|
|
of resource."
|
|
::= { ciscoL4L7ResourceLimitCompliances 3 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup,
|
|
ciscoL4L7BufferUtilizationGroup
|
|
}
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceUsageSummaryGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limiting and/or rate limiting
|
|
of resource."
|
|
::= { ciscoL4L7ResourceLimitCompliances 4 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup,
|
|
ciscoL4L7BufferUtilizationGroup
|
|
}
|
|
|
|
GROUP ciscoL4L7NpCpuUtilizationGroup
|
|
DESCRIPTION
|
|
"The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
|
|
CPU utilization of network processors."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceUsageSummaryGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limiting and/or rate limiting
|
|
of resource."
|
|
::= { ciscoL4L7ResourceLimitCompliances 5 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup,
|
|
ciscoL4L7BufferUtilizationGroupRev1
|
|
}
|
|
|
|
GROUP ciscoL4L7NpCpuUtilizationGroup
|
|
DESCRIPTION
|
|
"The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
|
|
CPU utilization of network processors."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceNotifGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceUsageSummaryGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limiting and/or rate limiting
|
|
of resource."
|
|
::= { ciscoL4L7ResourceLimitCompliances 6 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev6 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup,
|
|
ciscoL4L7BufferUtilizationGroupRev1
|
|
}
|
|
|
|
GROUP ciscoL4L7NpCpuUtilizationGroup
|
|
DESCRIPTION
|
|
"The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
|
|
CPU utilization of network processors."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceUsageSummaryGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limiting and/or rate limiting
|
|
of resource."
|
|
|
|
GROUP ciscoL4L7ResourceNotifOnlyObjectsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement ciscoL4L7ResourceNotifGroupRev1."
|
|
::= { ciscoL4L7ResourceLimitCompliances 7 }
|
|
|
|
ciscoL4L7ResourceLimitComplianceRev7 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoL4L7ResourceClassGroup,
|
|
ciscoL4L7ResourceLimitGroup,
|
|
ciscoL4L7ResourceLimitUsageGroup,
|
|
ciscoL4L7BufferUtilizationGroupRev1
|
|
}
|
|
|
|
GROUP ciscoL4L7NpCpuUtilizationGroup
|
|
DESCRIPTION
|
|
"The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
|
|
CPU utilization of network processors."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceRateLimitUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems where
|
|
rate limiting is supported."
|
|
|
|
GROUP ciscoL4L7ResourceNotifEnabledGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limit notifications."
|
|
|
|
GROUP ciscoL4L7ResourceUsageSummaryGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement resource limiting and/or rate limiting
|
|
of resource."
|
|
|
|
GROUP ciscoL4L7ResourceNotifOnlyObjectsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implement ciscoL4L7ResourceNotifGroupRev1."
|
|
|
|
GROUP ciscoL4L7ResourceNotifOnlyObjectsGroupExt
|
|
DESCRIPTION
|
|
"This group is mandatory for those systems which
|
|
implements ciscoL4L7ResourceNotifGroupRev2."
|
|
|
|
GROUP ciscoL4L7ResourceNotifGroupRev2
|
|
DESCRIPTION
|
|
"This group is optional and these traps indicates that configured
|
|
threshold is reached."
|
|
::= { ciscoL4L7ResourceLimitCompliances 8 }
|
|
|
|
-- MIB groupings
|
|
|
|
ciscoL4L7ResourceClassGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlResourceClassStorageType,
|
|
crlResourceClassRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
resource class in a system."
|
|
::= { ciscoL4L7ResourceLimitGroups 1 }
|
|
|
|
ciscoL4L7ResourceLimitGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlResourceLimitValueType,
|
|
crlResourceLimitMin,
|
|
crlResourceLimitMax,
|
|
crlResourceLimitStorageType,
|
|
crlResourceLimitRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
limits of resources in a resource class."
|
|
::= { ciscoL4L7ResourceLimitGroups 2 }
|
|
|
|
ciscoL4L7ResourceRateLimitGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlRateLimitResourceMin,
|
|
crlRateLimitResourceMax,
|
|
crlRateLimitResourceStorageType,
|
|
crlRateLimitResourceRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
rate limits for resources."
|
|
::= { ciscoL4L7ResourceLimitGroups 3 }
|
|
|
|
ciscoL4L7ResourceLimitUsageGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlResourceLimitCurrentUsage,
|
|
crlResourceLimitPeakUsage,
|
|
crlResourceLimitReqsDeniedCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
limit usage for resources."
|
|
::= { ciscoL4L7ResourceLimitGroups 4 }
|
|
|
|
ciscoL4L7ResourceRateLimitUsageGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlRateLimitResourceCurrentUsage,
|
|
crlRateLimitResourcePeakUsage,
|
|
crlRateLimitResourceReqsDeniedCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
rate limit usage for resources."
|
|
::= { ciscoL4L7ResourceLimitGroups 5 }
|
|
|
|
ciscoL4L7ResourceNotifEnabledGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clrResourceLimitReachedNotifEnabled,
|
|
clrResourceRateLimitReachedNotifEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
limit usage for resources."
|
|
::= { ciscoL4L7ResourceLimitGroups 6 }
|
|
|
|
ciscoL4L7ResourceNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
clrResourceLimitReached,
|
|
clrResourceRateLimitReached
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
rate limit usage for resources.
|
|
ciscoL4L7ResourceNotifGroup object is superseded by
|
|
ciscoL4L7ResourceNotifGroupRev1."
|
|
::= { ciscoL4L7ResourceLimitGroups 7 }
|
|
|
|
ciscoL4L7ResourceUsageSummaryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlResourceSummaryCurrentUsage,
|
|
crlResourceSummaryPeakUsage,
|
|
crlResourceSummaryReqsDeniedCount,
|
|
crlResourceSummaryLastClearedTime,
|
|
crlResourceSummaryStorageType,
|
|
crlResourceSummaryRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
usage summary for resources across the system."
|
|
::= { ciscoL4L7ResourceLimitGroups 8 }
|
|
|
|
ciscoL4L7BufferUtilizationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlBufferUsageValue,
|
|
crlPercentageBufferUsage,
|
|
crlPercentageBufferUsageDisplay
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
buffer utilization across the system.
|
|
ciscoL4L7BufferUtilizationGroup object is superseded by
|
|
ciscoL4L7BufferUtilizationGroupRev1."
|
|
::= { ciscoL4L7ResourceLimitGroups 9 }
|
|
|
|
ciscoL4L7NpCpuUtilizationGroup OBJECT-GROUP
|
|
OBJECTS { clrNpCpuUtilizationAverage }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing CPU utilization of
|
|
network processors."
|
|
::= { ciscoL4L7ResourceLimitGroups 10 }
|
|
|
|
ciscoL4L7BufferUtilizationGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
crlBufferUsageValue,
|
|
crlPercentageBufferUsage,
|
|
crlPercentageBufferUsageDisplay,
|
|
crlExternalBufferUsageValue,
|
|
crlExternalPercentageBufferUsage,
|
|
crlExternalPercentageBufferUsageDisplay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
buffer utilization across the system."
|
|
::= { ciscoL4L7ResourceLimitGroups 11 }
|
|
|
|
ciscoL4L7ResourceNotifGroupRev1 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
clrResourceLimitReachedNotif,
|
|
clrResourceRateLimitReachedNotif
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The collection of notifications which are used to report
|
|
resources usages to raising/falling below the configured
|
|
thresholds.
|
|
ciscoL4L7ResourceNotifGroupRev1 object is superseded by ciscoL4L7ResourceNotifGroupRev2."
|
|
::= { ciscoL4L7ResourceLimitGroups 12 }
|
|
|
|
ciscoL4L7ResourceNotifOnlyObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
crlNotifType,
|
|
crlNotifCurrentUsagePcnt,
|
|
crlNotifMaxThresholdPcnt,
|
|
crlNotifWatermarkPcnt,
|
|
crlNotifMinThresholdPcnt,
|
|
crlNotifContextOrSystem,
|
|
crlNotifContextName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of object(s) providing variable binding
|
|
information for resource notifications."
|
|
::= { ciscoL4L7ResourceLimitGroups 13 }
|
|
|
|
ciscoL4L7ResourceNotifGroupRev2 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
clrResourceLimitReachedNotifRev1,
|
|
clrResourceRateLimitReachedNotifRev1
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications which are used to report
|
|
resources usages to raising/falling below the configured
|
|
thresholds."
|
|
::= { ciscoL4L7ResourceLimitGroups 14 }
|
|
|
|
ciscoL4L7ResourceNotifOnlyObjectsGroupExt OBJECT-GROUP
|
|
OBJECTS {
|
|
crlNotifSourceType,
|
|
crlNotifRealServerName,
|
|
crlNotifVirtualIPAddrType,
|
|
crlNotifVirtualIPAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of object(s) providing variable binding
|
|
information for resource notifications."
|
|
::= { ciscoL4L7ResourceLimitGroups 15 }
|
|
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|