Observium_CE/mibs/cisco/CIE1000-MSTP-MIB

1366 lines
50 KiB
Plaintext

-- *****************************************************************
-- MSTP-MIB: Cisco private MIB
-- ****************************************************************
CIE1000-MSTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
NOTIFICATION-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC
cie1000SwitchMgmt FROM CISCO-IE1000-MIB
CIE1000DisplayString FROM CIE1000-TC
CIE1000InterfaceIndex FROM CIE1000-TC
CIE1000Unsigned16 FROM CIE1000-TC
CIE1000Unsigned8 FROM CIE1000-TC
CIE1000VlanListQuarter FROM CIE1000-TC
Integer32 FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
TruthValue FROM SNMPv2-TC
;
cie1000MstpMib MODULE-IDENTITY
LAST-UPDATED "201511130000Z"
ORGANIZATION
"Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"This is a private version of the 802.1Q-2005 MSTP MIB"
REVISION "201511130000Z"
DESCRIPTION
"Add TCN counters"
REVISION "201511040000Z"
DESCRIPTION
"Added msti config table with msti value as the iteration key"
REVISION "201509290000Z"
DESCRIPTION
"Added range information for bridge parameters"
REVISION "201407010000Z"
DESCRIPTION
"Initial version"
::= { cie1000SwitchMgmt 20 }
CIE1000MSTPForceVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumeration control the STP protocol variant to run."
SYNTAX INTEGER { stp(0), rstp(2), mstp(3) }
CIE1000MstpPoint2Point ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumeration describe the values of adminPointToPointMAC and
operPointToPointMAC parameters. (Full duplex port administrative and
operational status.) See 6.4.3 of IEEE Std 802.1D."
SYNTAX INTEGER { forceTrue(0), forceFalse(1), auto(2) }
CIE1000MstpPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumeration describe the forwarding state of an interface."
SYNTAX INTEGER { disabled(0), discarding(1), learning(2),
forwarding(3) }
cie1000MstpMibObjects OBJECT IDENTIFIER
::= { cie1000MstpMib 1 }
cie1000MstpConfig OBJECT IDENTIFIER
::= { cie1000MstpMibObjects 2 }
cie1000MstpConfigBridgeParams OBJECT IDENTIFIER
::= { cie1000MstpConfig 1 }
cie1000MstpConfigBridgeParamsBridgeMaxAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge Max Age, IEEE-802.1D-2004 sect 13.23.4"
::= { cie1000MstpConfigBridgeParams 1 }
cie1000MstpConfigBridgeParamsBridgeHelloTime OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge Hello Time, 13.25.7 of IEEE-802.1Q-2005. Fixed value of two
seconds by the standard, but this implementation allow a compatibility
range from 1 to 2 seconds, in stipulated in 802.1Q-2005"
::= { cie1000MstpConfigBridgeParams 2 }
cie1000MstpConfigBridgeParamsBridgeForwardDelay OBJECT-TYPE
SYNTAX Unsigned32 (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge Forward Delay, IEEE-802.1D-2004 sect 17.20"
::= { cie1000MstpConfigBridgeParams 3 }
cie1000MstpConfigBridgeParamsForceVersion OBJECT-TYPE
SYNTAX CIE1000MSTPForceVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"value of the Force Protocol Version parameter - 13.6.2 of
IEEE-802.1Q-2005"
::= { cie1000MstpConfigBridgeParams 4 }
cie1000MstpConfigBridgeParamsTxHoldCount OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TxHoldCount - 17.13.12 of IEEE Std 802.1D"
::= { cie1000MstpConfigBridgeParams 5 }
cie1000MstpConfigBridgeParamsMaxHops OBJECT-TYPE
SYNTAX CIE1000Unsigned8 (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MaxHops - 13.22.1 of IEEE-802.1Q-2005"
::= { cie1000MstpConfigBridgeParams 6 }
cie1000MstpConfigBridgeParamsBpduFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BPDU filtering for edge ports. Control whether a port explicitly
configured as Edge will transmit and receive BPDUs"
::= { cie1000MstpConfigBridgeParams 7 }
cie1000MstpConfigBridgeParamsBpduGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BPDU guard for edge ports. Control whether a port explicitly configured
as Edge will disable itself upon reception of a BPDU. The port will
enter the error-disabled state, and will be removed from the active
topology. "
::= { cie1000MstpConfigBridgeParams 8 }
cie1000MstpConfigBridgeParamsErrorRecoveryDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds until a STP inconsistent port is recovered. Valid
values are zero (recovery disabled) or between 30 and 86400 (24 hours)"
::= { cie1000MstpConfigBridgeParams 9 }
cie1000MstpConfigMstiParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpConfigMstiParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of the bridge instance (MSTIs) parameters"
::= { cie1000MstpConfig 2 }
cie1000MstpConfigMstiParamEntry OBJECT-TYPE
SYNTAX CIE1000MstpConfigMstiParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each MSTI has a set of parameters"
INDEX { cie1000MstpConfigMstiParamInstance }
::= { cie1000MstpConfigMstiParamTable 1 }
CIE1000MstpConfigMstiParamEntry ::= SEQUENCE {
cie1000MstpConfigMstiParamInstance Integer32,
cie1000MstpConfigMstiParamPriority CIE1000Unsigned8
}
cie1000MstpConfigMstiParamInstance OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Bridge instance number. The CIST = 0, MSTI1 = 1, etc"
::= { cie1000MstpConfigMstiParamEntry 1 }
cie1000MstpConfigMstiParamPriority OBJECT-TYPE
SYNTAX CIE1000Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge Priority"
::= { cie1000MstpConfigMstiParamEntry 2 }
cie1000MstpConfigMstiConfig OBJECT IDENTIFIER
::= { cie1000MstpConfig 3 }
cie1000MstpConfigMstiConfigId OBJECT IDENTIFIER
::= { cie1000MstpConfigMstiConfig 1 }
cie1000MstpConfigMstiConfigIdName OBJECT-TYPE
SYNTAX CIE1000DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration name"
::= { cie1000MstpConfigMstiConfigId 1 }
cie1000MstpConfigMstiConfigIdRevision OBJECT-TYPE
SYNTAX CIE1000Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration revision"
::= { cie1000MstpConfigMstiConfigId 2 }
cie1000MstpConfigMstiConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpConfigMstiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the 802.1Q - 8.9 MST Configuration table
For the purposes of calculating the Configuration Digest, the MST
Configuration Table is considered to contain 4096 consecutive single
octet elements, where each element of the table (with the exception of
the first and last) contains an MSTID value."
::= { cie1000MstpConfigMstiConfig 2 }
cie1000MstpConfigMstiConfigEntry OBJECT-TYPE
SYNTAX CIE1000MstpConfigMstiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first element of the table contains the value 0, the second element
the MSTID value corresponding to VID 1, the third element the MSTID
value corresponding to VID 2, and so on, with the next to last element
of the table containing the MSTID value corresponding to VID 4094, and
the last element containing the value 0."
INDEX { cie1000MstpConfigMstiConfigVid }
::= { cie1000MstpConfigMstiConfigTable 1 }
CIE1000MstpConfigMstiConfigEntry ::= SEQUENCE {
cie1000MstpConfigMstiConfigVid Integer32,
cie1000MstpConfigMstiConfigMstid CIE1000Unsigned8
}
cie1000MstpConfigMstiConfigVid OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Vlan id"
::= { cie1000MstpConfigMstiConfigEntry 1 }
cie1000MstpConfigMstiConfigMstid OBJECT-TYPE
SYNTAX CIE1000Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MSTID value associated with the vlan id"
::= { cie1000MstpConfigMstiConfigEntry 2 }
cie1000MstpConfigMstiConfigVlanBitmapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpConfigMstiConfigVlanBitmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the 802.1Q - 8.9 MST Configuration table
For the purposes of calculating the Configuration Digest, the MST
Configuration Table is considered to contain 8 consecutive single octet
elements, where each element of the table contains an vlan bitmap
(vlans that have the MSTI value specified are set to one)."
::= { cie1000MstpConfigMstiConfig 3 }
cie1000MstpConfigMstiConfigVlanBitmapEntry OBJECT-TYPE
SYNTAX CIE1000MstpConfigMstiConfigVlanBitmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first element of the table contains vlan bitmap corresponding to
MSTI 0, the second element contains vlan bitmap corresponding to MSTI 1
until the 7th element. MSTI range is 0-7."
INDEX { cie1000MstpConfigMstiConfigVlanBitmapMstiValue }
::= { cie1000MstpConfigMstiConfigVlanBitmapTable 1 }
CIE1000MstpConfigMstiConfigVlanBitmapEntry ::= SEQUENCE {
cie1000MstpConfigMstiConfigVlanBitmapMstiValue Integer32,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans0To1K CIE1000VlanListQuarter,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans1KTo2K CIE1000VlanListQuarter,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans2KTo3K CIE1000VlanListQuarter,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans3KTo4K CIE1000VlanListQuarter
}
cie1000MstpConfigMstiConfigVlanBitmapMstiValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"MSTI value."
::= { cie1000MstpConfigMstiConfigVlanBitmapEntry 1 }
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans0To1K OBJECT-TYPE
SYNTAX CIE1000VlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First quarter of bit-array indicating the enabled access VLANs."
::= { cie1000MstpConfigMstiConfigVlanBitmapEntry 2 }
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans1KTo2K OBJECT-TYPE
SYNTAX CIE1000VlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Second quarter of bit-array indicating the enabled access VLANs."
::= { cie1000MstpConfigMstiConfigVlanBitmapEntry 3 }
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans2KTo3K OBJECT-TYPE
SYNTAX CIE1000VlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Third quarter of bit-array indicating the enabled access VLANs."
::= { cie1000MstpConfigMstiConfigVlanBitmapEntry 4 }
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans3KTo4K OBJECT-TYPE
SYNTAX CIE1000VlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last quarter of bit-array indicating the enabled access VLANs."
::= { cie1000MstpConfigMstiConfigVlanBitmapEntry 5 }
cie1000MstpConfigCistInterfaceParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpConfigCistInterfaceParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of the CIST physical interface parameters"
::= { cie1000MstpConfig 4 }
cie1000MstpConfigCistInterfaceParamEntry OBJECT-TYPE
SYNTAX CIE1000MstpConfigCistInterfaceParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each CIST physical interface has a set of parameters"
INDEX { cie1000MstpConfigCistInterfaceParamInterfaceNo }
::= { cie1000MstpConfigCistInterfaceParamTable 1 }
CIE1000MstpConfigCistInterfaceParamEntry ::= SEQUENCE {
cie1000MstpConfigCistInterfaceParamInterfaceNo CIE1000InterfaceIndex,
cie1000MstpConfigCistInterfaceParamEnable TruthValue,
cie1000MstpConfigCistInterfaceParamAdminEdgePort TruthValue,
cie1000MstpConfigCistInterfaceParamAdminAutoEdgePort TruthValue,
cie1000MstpConfigCistInterfaceParamAdminPointToPointMAC CIE1000MstpPoint2Point,
cie1000MstpConfigCistInterfaceParamRestrictedRole TruthValue,
cie1000MstpConfigCistInterfaceParamRestrictedTcn TruthValue,
cie1000MstpConfigCistInterfaceParamBpduGuard TruthValue
}
cie1000MstpConfigCistInterfaceParamInterfaceNo OBJECT-TYPE
SYNTAX CIE1000InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Logical interface number."
::= { cie1000MstpConfigCistInterfaceParamEntry 1 }
cie1000MstpConfigCistInterfaceParamEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control whether port is controlled by xSTP. If disabled, the port
forwarding state follow the MAC state"
::= { cie1000MstpConfigCistInterfaceParamEntry 2 }
cie1000MstpConfigCistInterfaceParamAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adminEdgePort parameter - 18.3.3 of IEEE Std 802.1D"
::= { cie1000MstpConfigCistInterfaceParamEntry 3 }
cie1000MstpConfigCistInterfaceParamAdminAutoEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adminAutoEdgePort parameter - 17.13.3 of IEEE Std 802.1D"
::= { cie1000MstpConfigCistInterfaceParamEntry 4 }
cie1000MstpConfigCistInterfaceParamAdminPointToPointMAC OBJECT-TYPE
SYNTAX CIE1000MstpPoint2Point
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adminPointToPointMAC parameter - 6.4.3 of IEEE Std 802.1D"
::= { cie1000MstpConfigCistInterfaceParamEntry 5 }
cie1000MstpConfigCistInterfaceParamRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"restrictedRole parameter - 13.25.14 of IEEE Std 802.1Q-2005"
::= { cie1000MstpConfigCistInterfaceParamEntry 6 }
cie1000MstpConfigCistInterfaceParamRestrictedTcn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"restrictedRole parameter - 13.25.15 of IEEE Std 802.1Q-2005"
::= { cie1000MstpConfigCistInterfaceParamEntry 7 }
cie1000MstpConfigCistInterfaceParamBpduGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, causes the port to disable itself upon receiving valid
BPDU's. Contrary to the similar bridge setting, the port Edge status
does not effect this setting. A port entering error-disabled state due
to this setting is subject to the bridge ErrorRecoveryDelay setting as
well"
::= { cie1000MstpConfigCistInterfaceParamEntry 8 }
cie1000MstpConfigAggrParams OBJECT IDENTIFIER
::= { cie1000MstpConfig 5 }
cie1000MstpConfigAggrParamsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control whether port is controlled by xSTP. If disabled, the port
forwarding state follow the MAC state"
::= { cie1000MstpConfigAggrParams 1 }
cie1000MstpConfigAggrParamsAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adminEdgePort parameter - 18.3.3 of IEEE Std 802.1D"
::= { cie1000MstpConfigAggrParams 2 }
cie1000MstpConfigAggrParamsAdminAutoEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adminAutoEdgePort parameter - 17.13.3 of IEEE Std 802.1D"
::= { cie1000MstpConfigAggrParams 3 }
cie1000MstpConfigAggrParamsAdminPointToPointMAC OBJECT-TYPE
SYNTAX CIE1000MstpPoint2Point
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adminPointToPointMAC parameter - 6.4.3 of IEEE Std 802.1D"
::= { cie1000MstpConfigAggrParams 4 }
cie1000MstpConfigAggrParamsRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"restrictedRole parameter - 13.25.14 of IEEE Std 802.1Q-2005"
::= { cie1000MstpConfigAggrParams 5 }
cie1000MstpConfigAggrParamsRestrictedTcn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"restrictedRole parameter - 13.25.15 of IEEE Std 802.1Q-2005"
::= { cie1000MstpConfigAggrParams 6 }
cie1000MstpConfigAggrParamsBpduGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, causes the port to disable itself upon receiving valid
BPDU's. Contrary to the similar bridge setting, the port Edge status
does not effect this setting. A port entering error-disabled state due
to this setting is subject to the bridge ErrorRecoveryDelay setting as
well"
::= { cie1000MstpConfigAggrParams 7 }
cie1000MstpConfigMstiInterfaceParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpConfigMstiInterfaceParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of the MSTI interface parameters"
::= { cie1000MstpConfig 6 }
cie1000MstpConfigMstiInterfaceParamEntry OBJECT-TYPE
SYNTAX CIE1000MstpConfigMstiInterfaceParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each MSTI interface has a set of parameters"
INDEX { cie1000MstpConfigMstiInterfaceParamInterfaceNo,
cie1000MstpConfigMstiInterfaceParamInstance }
::= { cie1000MstpConfigMstiInterfaceParamTable 1 }
CIE1000MstpConfigMstiInterfaceParamEntry ::= SEQUENCE {
cie1000MstpConfigMstiInterfaceParamInterfaceNo CIE1000InterfaceIndex,
cie1000MstpConfigMstiInterfaceParamInstance Integer32,
cie1000MstpConfigMstiInterfaceParamAdminPathCost Unsigned32,
cie1000MstpConfigMstiInterfaceParamAdminPortPriority CIE1000Unsigned8
}
cie1000MstpConfigMstiInterfaceParamInterfaceNo OBJECT-TYPE
SYNTAX CIE1000InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Logical interface number."
::= { cie1000MstpConfigMstiInterfaceParamEntry 1 }
cie1000MstpConfigMstiInterfaceParamInstance OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Bridge instance number. The CIST = 0, MSTI1 = 1, etc"
::= { cie1000MstpConfigMstiInterfaceParamEntry 2 }
cie1000MstpConfigMstiInterfaceParamAdminPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Path Cost - 13.37.1 of 802.1Q-2005"
::= { cie1000MstpConfigMstiInterfaceParamEntry 3 }
cie1000MstpConfigMstiInterfaceParamAdminPortPriority OBJECT-TYPE
SYNTAX CIE1000Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"priority field for the Port Identifier - 13.24.12 of 802.1Q-2005"
::= { cie1000MstpConfigMstiInterfaceParamEntry 4 }
cie1000MstpConfigMstiAggrParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpConfigMstiAggrParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table of the MSTI aggregations parameters"
::= { cie1000MstpConfig 7 }
cie1000MstpConfigMstiAggrParamEntry OBJECT-TYPE
SYNTAX CIE1000MstpConfigMstiAggrParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aggregations for each MSTI has a set of parameters"
INDEX { cie1000MstpConfigMstiAggrParamInstance }
::= { cie1000MstpConfigMstiAggrParamTable 1 }
CIE1000MstpConfigMstiAggrParamEntry ::= SEQUENCE {
cie1000MstpConfigMstiAggrParamInstance Integer32,
cie1000MstpConfigMstiAggrParamAdminPathCost Unsigned32,
cie1000MstpConfigMstiAggrParamAdminPortPriority CIE1000Unsigned8
}
cie1000MstpConfigMstiAggrParamInstance OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Bridge instance number. The CIST = 0, MSTI1 = 1, etc"
::= { cie1000MstpConfigMstiAggrParamEntry 1 }
cie1000MstpConfigMstiAggrParamAdminPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Path Cost - 13.37.1 of 802.1Q-2005"
::= { cie1000MstpConfigMstiAggrParamEntry 3 }
cie1000MstpConfigMstiAggrParamAdminPortPriority OBJECT-TYPE
SYNTAX CIE1000Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"priority field for the Port Identifier - 13.24.12 of 802.1Q-2005"
::= { cie1000MstpConfigMstiAggrParamEntry 4 }
cie1000MstpStatus OBJECT IDENTIFIER
::= { cie1000MstpMibObjects 3 }
cie1000MstpStatusBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpStatusBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represent the status of the bridge instances"
::= { cie1000MstpStatus 1 }
cie1000MstpStatusBridgeEntry OBJECT-TYPE
SYNTAX CIE1000MstpStatusBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A MSTP Bridge instance set of status objects"
INDEX { cie1000MstpStatusBridgeInstance }
::= { cie1000MstpStatusBridgeTable 1 }
CIE1000MstpStatusBridgeEntry ::= SEQUENCE {
cie1000MstpStatusBridgeInstance Integer32,
cie1000MstpStatusBridgeBridgeId OCTET STRING,
cie1000MstpStatusBridgeTimeSinceTopologyChange Unsigned32,
cie1000MstpStatusBridgeTopologyChangeCount Unsigned32,
cie1000MstpStatusBridgeTopologyChange TruthValue,
cie1000MstpStatusBridgeDesignatedRoot OCTET STRING,
cie1000MstpStatusBridgeRootPathCost Unsigned32,
cie1000MstpStatusBridgeRootPort Unsigned32,
cie1000MstpStatusBridgeMaxAge Unsigned32,
cie1000MstpStatusBridgeForwardDelay Unsigned32,
cie1000MstpStatusBridgeBridgeMaxAge Unsigned32,
cie1000MstpStatusBridgeBridgeHelloTime Unsigned32,
cie1000MstpStatusBridgeBridgeForwardDelay Unsigned32,
cie1000MstpStatusBridgeTxHoldCount Unsigned32,
cie1000MstpStatusBridgeForceVersion CIE1000MSTPForceVersion,
cie1000MstpStatusBridgeCistRegionalRoot OCTET STRING,
cie1000MstpStatusBridgeCistInternalPathCost Unsigned32,
cie1000MstpStatusBridgeMaxHops CIE1000Unsigned8
}
cie1000MstpStatusBridgeInstance OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Bridge instance number. The CIST = 0, MSTI1 = 1, etc"
::= { cie1000MstpStatusBridgeEntry 1 }
cie1000MstpStatusBridgeBridgeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bridge Identifier of this bridge"
::= { cie1000MstpStatusBridgeEntry 2 }
cie1000MstpStatusBridgeTimeSinceTopologyChange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count in seconds of the time elapsed since the Topology Change flag
was last True"
::= { cie1000MstpStatusBridgeEntry 3 }
cie1000MstpStatusBridgeTopologyChangeCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the times the Topology Change flag parameter for the
Bridge has been set since the Bridge was powered on or initialized"
::= { cie1000MstpStatusBridgeEntry 4 }
cie1000MstpStatusBridgeTopologyChange OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Topology Change Flag current status"
::= { cie1000MstpStatusBridgeEntry 5 }
cie1000MstpStatusBridgeDesignatedRoot OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Designated Root Bridge"
::= { cie1000MstpStatusBridgeEntry 6 }
cie1000MstpStatusBridgeRootPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost"
::= { cie1000MstpStatusBridgeEntry 7 }
cie1000MstpStatusBridgeRootPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Port"
::= { cie1000MstpStatusBridgeEntry 8 }
cie1000MstpStatusBridgeMaxAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Age, IEEE-802.1D-2004 sect 13.23.7"
::= { cie1000MstpStatusBridgeEntry 9 }
cie1000MstpStatusBridgeForwardDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay, IEEE-802.1D-2004 sect 13.23.7"
::= { cie1000MstpStatusBridgeEntry 10 }
cie1000MstpStatusBridgeBridgeMaxAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bridge Max Age, IEEE-802.1D-2004 sect 13.23.4"
::= { cie1000MstpStatusBridgeEntry 11 }
cie1000MstpStatusBridgeBridgeHelloTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bridge Hello Time, IEEE-802.1D-2004 sect 13.23.4"
::= { cie1000MstpStatusBridgeEntry 12 }
cie1000MstpStatusBridgeBridgeForwardDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bridge Forward Delay, IEEE-802.1D-2004 sect 13.23.4"
::= { cie1000MstpStatusBridgeEntry 13 }
cie1000MstpStatusBridgeTxHoldCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hold Time / Transmission Limit, IEEE-802.1D-2004 sect 13.22"
::= { cie1000MstpStatusBridgeEntry 14 }
cie1000MstpStatusBridgeForceVersion OBJECT-TYPE
SYNTAX CIE1000MSTPForceVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of the Force Protocol Version parameter - IEEE-802.1D-2004 sect
17.16.1"
::= { cie1000MstpStatusBridgeEntry 15 }
cie1000MstpStatusBridgeCistRegionalRoot OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CIST Regional Root Identifier (13.16.4)"
::= { cie1000MstpStatusBridgeEntry 16 }
cie1000MstpStatusBridgeCistInternalPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CIST Path Cost"
::= { cie1000MstpStatusBridgeEntry 17 }
cie1000MstpStatusBridgeMaxHops OBJECT-TYPE
SYNTAX CIE1000Unsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MaxHops (13.22.1)"
::= { cie1000MstpStatusBridgeEntry 18 }
cie1000MstpStatusInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpStatusInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represent the status of the interface instances"
::= { cie1000MstpStatus 2 }
cie1000MstpStatusInterfaceEntry OBJECT-TYPE
SYNTAX CIE1000MstpStatusInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A MSTP interface instance set of status objects"
INDEX { cie1000MstpStatusInterfaceInterfaceNo,
cie1000MstpStatusInterfaceInstance }
::= { cie1000MstpStatusInterfaceTable 1 }
CIE1000MstpStatusInterfaceEntry ::= SEQUENCE {
cie1000MstpStatusInterfaceInterfaceNo CIE1000InterfaceIndex,
cie1000MstpStatusInterfaceInstance Integer32,
cie1000MstpStatusInterfaceEnabled TruthValue,
cie1000MstpStatusInterfaceActive TruthValue,
cie1000MstpStatusInterfaceParentPort Unsigned32,
cie1000MstpStatusInterfaceUpTime Unsigned32,
cie1000MstpStatusInterfacePortState CIE1000MstpPortState,
cie1000MstpStatusInterfacePortId OCTET STRING,
cie1000MstpStatusInterfacePathCost Unsigned32,
cie1000MstpStatusInterfaceDesignatedRoot OCTET STRING,
cie1000MstpStatusInterfaceDesignatedCost Unsigned32,
cie1000MstpStatusInterfaceDesignatedBridge OCTET STRING,
cie1000MstpStatusInterfaceDesignatedPort OCTET STRING,
cie1000MstpStatusInterfaceTcAck TruthValue,
cie1000MstpStatusInterfaceHelloTime Unsigned32,
cie1000MstpStatusInterfaceAdminEdgePort TruthValue,
cie1000MstpStatusInterfaceOperEdgePort TruthValue,
cie1000MstpStatusInterfaceAutoEdgePort TruthValue,
cie1000MstpStatusInterfaceMacOperational TruthValue,
cie1000MstpStatusInterfaceAdminPointToPointMAC CIE1000MstpPoint2Point,
cie1000MstpStatusInterfaceOperPointToPointMAC TruthValue,
cie1000MstpStatusInterfaceRestrictedRole TruthValue,
cie1000MstpStatusInterfaceRestrictedTcn TruthValue,
cie1000MstpStatusInterfacePortRole CIE1000DisplayString,
cie1000MstpStatusInterfaceDisputed TruthValue
}
cie1000MstpStatusInterfaceInterfaceNo OBJECT-TYPE
SYNTAX CIE1000InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Logical interface number."
::= { cie1000MstpStatusInterfaceEntry 1 }
cie1000MstpStatusInterfaceInstance OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Bridge instance number. The CIST = 0, MSTI1 = 1, etc"
::= { cie1000MstpStatusInterfaceEntry 2 }
cie1000MstpStatusInterfaceEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether port is controlled by xSTP"
::= { cie1000MstpStatusInterfaceEntry 3 }
cie1000MstpStatusInterfaceActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether port is active"
::= { cie1000MstpStatusInterfaceEntry 4 }
cie1000MstpStatusInterfaceParentPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Parent port if physical port is aggregated. (Otherwise 0xffff)"
::= { cie1000MstpStatusInterfaceEntry 5 }
cie1000MstpStatusInterfaceUpTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"seconds of the time elapsed since the Port was last reset or
initialized"
::= { cie1000MstpStatusInterfaceEntry 6 }
cie1000MstpStatusInterfacePortState OBJECT-TYPE
SYNTAX CIE1000MstpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port"
::= { cie1000MstpStatusInterfaceEntry 7 }
cie1000MstpStatusInterfacePortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique Port identifier comprising two parts, the Port Number and the
Port Priority field"
::= { cie1000MstpStatusInterfaceEntry 8 }
cie1000MstpStatusInterfacePathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path Cost (17.16.5 of IEEE Std 802.1D)"
::= { cie1000MstpStatusInterfaceEntry 9 }
cie1000MstpStatusInterfaceDesignatedRoot OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Designated Root"
::= { cie1000MstpStatusInterfaceEntry 10 }
cie1000MstpStatusInterfaceDesignatedCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Designated Cost"
::= { cie1000MstpStatusInterfaceEntry 11 }
cie1000MstpStatusInterfaceDesignatedBridge OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Designated Bridge"
::= { cie1000MstpStatusInterfaceEntry 12 }
cie1000MstpStatusInterfaceDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Designated Port"
::= { cie1000MstpStatusInterfaceEntry 13 }
cie1000MstpStatusInterfaceTcAck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Topology Change Acknowledge"
::= { cie1000MstpStatusInterfaceEntry 14 }
cie1000MstpStatusInterfaceHelloTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello Time"
::= { cie1000MstpStatusInterfaceEntry 15 }
cie1000MstpStatusInterfaceAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"adminEdgePort (18.3.3 of IEEE Std 802.1D)"
::= { cie1000MstpStatusInterfaceEntry 16 }
cie1000MstpStatusInterfaceOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"operEdgePort (18.3.4 of IEEE Std 802.1D)"
::= { cie1000MstpStatusInterfaceEntry 17 }
cie1000MstpStatusInterfaceAutoEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"autoEdgePort (17.13.3 of IEEE Std 802.1D)"
::= { cie1000MstpStatusInterfaceEntry 18 }
cie1000MstpStatusInterfaceMacOperational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the MAC Operational parameter (6.4.2 of IEEE Std
802.1D,)"
::= { cie1000MstpStatusInterfaceEntry 19 }
cie1000MstpStatusInterfaceAdminPointToPointMAC OBJECT-TYPE
SYNTAX CIE1000MstpPoint2Point
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the adminPointToPointMAC parameter (6.4.3 of IEEE Std
802.1D)"
::= { cie1000MstpStatusInterfaceEntry 20 }
cie1000MstpStatusInterfaceOperPointToPointMAC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the operPointToPointMAC parameter (6.4.3 of IEEE Std
802.1D)"
::= { cie1000MstpStatusInterfaceEntry 21 }
cie1000MstpStatusInterfaceRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the restrictedRole parameter for the Port (13.25.14)"
::= { cie1000MstpStatusInterfaceEntry 22 }
cie1000MstpStatusInterfaceRestrictedTcn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the restrictedTcn parameter for the Port (13.25.15)"
::= { cie1000MstpStatusInterfaceEntry 23 }
cie1000MstpStatusInterfacePortRole OBJECT-TYPE
SYNTAX CIE1000DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role"
::= { cie1000MstpStatusInterfaceEntry 24 }
cie1000MstpStatusInterfaceDisputed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value of the disputed variable for the CIST Port"
::= { cie1000MstpStatusInterfaceEntry 25 }
cie1000MstpStatusInterfaceStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIE1000MstpStatusInterfaceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represent the statistics of the CIST interfaces"
::= { cie1000MstpStatus 3 }
cie1000MstpStatusInterfaceStatisticsEntry OBJECT-TYPE
SYNTAX CIE1000MstpStatusInterfaceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A CIST interface set of statistics"
INDEX { cie1000MstpStatusInterfaceStatisticsInterfaceNo }
::= { cie1000MstpStatusInterfaceStatisticsTable 1 }
CIE1000MstpStatusInterfaceStatisticsEntry ::= SEQUENCE {
cie1000MstpStatusInterfaceStatisticsInterfaceNo CIE1000InterfaceIndex,
cie1000MstpStatusInterfaceStatisticsStpFrameXmits Unsigned32,
cie1000MstpStatusInterfaceStatisticsStpFrameReceived Unsigned32,
cie1000MstpStatusInterfaceStatisticsRstpFrameXmits Unsigned32,
cie1000MstpStatusInterfaceStatisticsRstpFrameReceived Unsigned32,
cie1000MstpStatusInterfaceStatisticsMstpFrameXmits Unsigned32,
cie1000MstpStatusInterfaceStatisticsMstpFrameReceived Unsigned32,
cie1000MstpStatusInterfaceStatisticsUnknownFramesReceived Unsigned32,
cie1000MstpStatusInterfaceStatisticsIllegalFrameReceived Unsigned32,
cie1000MstpStatusInterfaceStatisticsTcnFrameXmits Unsigned32,
cie1000MstpStatusInterfaceStatisticsTcnFrameReceived Unsigned32
}
cie1000MstpStatusInterfaceStatisticsInterfaceNo OBJECT-TYPE
SYNTAX CIE1000InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Logical interface number."
::= { cie1000MstpStatusInterfaceStatisticsEntry 1 }
cie1000MstpStatusInterfaceStatisticsStpFrameXmits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of STP frames transmitted"
::= { cie1000MstpStatusInterfaceStatisticsEntry 2 }
cie1000MstpStatusInterfaceStatisticsStpFrameReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of STP frames received"
::= { cie1000MstpStatusInterfaceStatisticsEntry 3 }
cie1000MstpStatusInterfaceStatisticsRstpFrameXmits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RSTP frames transmitted"
::= { cie1000MstpStatusInterfaceStatisticsEntry 4 }
cie1000MstpStatusInterfaceStatisticsRstpFrameReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RSTP frames received"
::= { cie1000MstpStatusInterfaceStatisticsEntry 5 }
cie1000MstpStatusInterfaceStatisticsMstpFrameXmits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MSTP frames transmitted"
::= { cie1000MstpStatusInterfaceStatisticsEntry 6 }
cie1000MstpStatusInterfaceStatisticsMstpFrameReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MSTP frames received"
::= { cie1000MstpStatusInterfaceStatisticsEntry 7 }
cie1000MstpStatusInterfaceStatisticsUnknownFramesReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unknown frames received and discarded in error"
::= { cie1000MstpStatusInterfaceStatisticsEntry 8 }
cie1000MstpStatusInterfaceStatisticsIllegalFrameReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of illegal frames received and discarded in error"
::= { cie1000MstpStatusInterfaceStatisticsEntry 9 }
cie1000MstpStatusInterfaceStatisticsTcnFrameXmits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN frames transmitted"
::= { cie1000MstpStatusInterfaceStatisticsEntry 10 }
cie1000MstpStatusInterfaceStatisticsTcnFrameReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN frames received"
::= { cie1000MstpStatusInterfaceStatisticsEntry 11 }
cie1000MstpMibConformance OBJECT IDENTIFIER
::= { cie1000MstpMib 2 }
cie1000MstpMibCompliances OBJECT IDENTIFIER
::= { cie1000MstpMibConformance 1 }
cie1000MstpMibGroups OBJECT IDENTIFIER
::= { cie1000MstpMibConformance 2 }
cie1000MstpConfigBridgeParamsInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigBridgeParamsBridgeMaxAge,
cie1000MstpConfigBridgeParamsBridgeHelloTime,
cie1000MstpConfigBridgeParamsBridgeForwardDelay,
cie1000MstpConfigBridgeParamsForceVersion,
cie1000MstpConfigBridgeParamsTxHoldCount,
cie1000MstpConfigBridgeParamsMaxHops,
cie1000MstpConfigBridgeParamsBpduFiltering,
cie1000MstpConfigBridgeParamsBpduGuard,
cie1000MstpConfigBridgeParamsErrorRecoveryDelay }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 1 }
cie1000MstpConfigMstiParamTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigMstiParamInstance,
cie1000MstpConfigMstiParamPriority }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 2 }
cie1000MstpConfigMstiConfigIdInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigMstiConfigIdName,
cie1000MstpConfigMstiConfigIdRevision }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 3 }
cie1000MstpConfigMstiConfigTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigMstiConfigVid,
cie1000MstpConfigMstiConfigMstid }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 4 }
cie1000MstpConfigMstiConfigVlanBitmapTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigMstiConfigVlanBitmapMstiValue,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans0To1K,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans1KTo2K,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans2KTo3K,
cie1000MstpConfigMstiConfigVlanBitmapAccessVlans3KTo4K }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 5 }
cie1000MstpConfigCistInterfaceParamTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigCistInterfaceParamInterfaceNo,
cie1000MstpConfigCistInterfaceParamEnable,
cie1000MstpConfigCistInterfaceParamAdminEdgePort,
cie1000MstpConfigCistInterfaceParamAdminAutoEdgePort,
cie1000MstpConfigCistInterfaceParamAdminPointToPointMAC,
cie1000MstpConfigCistInterfaceParamRestrictedRole,
cie1000MstpConfigCistInterfaceParamRestrictedTcn,
cie1000MstpConfigCistInterfaceParamBpduGuard }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 6 }
cie1000MstpConfigAggrParamsInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigAggrParamsEnable,
cie1000MstpConfigAggrParamsAdminEdgePort,
cie1000MstpConfigAggrParamsAdminAutoEdgePort,
cie1000MstpConfigAggrParamsAdminPointToPointMAC,
cie1000MstpConfigAggrParamsRestrictedRole,
cie1000MstpConfigAggrParamsRestrictedTcn,
cie1000MstpConfigAggrParamsBpduGuard }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 7 }
cie1000MstpConfigMstiInterfaceParamTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigMstiInterfaceParamInterfaceNo,
cie1000MstpConfigMstiInterfaceParamInstance,
cie1000MstpConfigMstiInterfaceParamAdminPathCost,
cie1000MstpConfigMstiInterfaceParamAdminPortPriority }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 8 }
cie1000MstpConfigMstiAggrParamTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpConfigMstiAggrParamInstance,
cie1000MstpConfigMstiAggrParamAdminPathCost,
cie1000MstpConfigMstiAggrParamAdminPortPriority }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 9 }
cie1000MstpStatusBridgeTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpStatusBridgeInstance,
cie1000MstpStatusBridgeBridgeId,
cie1000MstpStatusBridgeTimeSinceTopologyChange,
cie1000MstpStatusBridgeTopologyChangeCount,
cie1000MstpStatusBridgeTopologyChange,
cie1000MstpStatusBridgeDesignatedRoot,
cie1000MstpStatusBridgeRootPathCost,
cie1000MstpStatusBridgeRootPort,
cie1000MstpStatusBridgeMaxAge,
cie1000MstpStatusBridgeForwardDelay,
cie1000MstpStatusBridgeBridgeMaxAge,
cie1000MstpStatusBridgeBridgeHelloTime,
cie1000MstpStatusBridgeBridgeForwardDelay,
cie1000MstpStatusBridgeTxHoldCount,
cie1000MstpStatusBridgeForceVersion,
cie1000MstpStatusBridgeCistRegionalRoot,
cie1000MstpStatusBridgeCistInternalPathCost,
cie1000MstpStatusBridgeMaxHops }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 10 }
cie1000MstpStatusInterfaceTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpStatusInterfaceInterfaceNo,
cie1000MstpStatusInterfaceInstance,
cie1000MstpStatusInterfaceEnabled,
cie1000MstpStatusInterfaceActive,
cie1000MstpStatusInterfaceParentPort,
cie1000MstpStatusInterfaceUpTime,
cie1000MstpStatusInterfacePortState,
cie1000MstpStatusInterfacePortId,
cie1000MstpStatusInterfacePathCost,
cie1000MstpStatusInterfaceDesignatedRoot,
cie1000MstpStatusInterfaceDesignatedCost,
cie1000MstpStatusInterfaceDesignatedBridge,
cie1000MstpStatusInterfaceDesignatedPort,
cie1000MstpStatusInterfaceTcAck,
cie1000MstpStatusInterfaceHelloTime,
cie1000MstpStatusInterfaceAdminEdgePort,
cie1000MstpStatusInterfaceOperEdgePort,
cie1000MstpStatusInterfaceAutoEdgePort,
cie1000MstpStatusInterfaceMacOperational,
cie1000MstpStatusInterfaceAdminPointToPointMAC,
cie1000MstpStatusInterfaceOperPointToPointMAC,
cie1000MstpStatusInterfaceRestrictedRole,
cie1000MstpStatusInterfaceRestrictedTcn,
cie1000MstpStatusInterfacePortRole,
cie1000MstpStatusInterfaceDisputed }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 11 }
cie1000MstpStatusInterfaceStatisticsTableInfoGroup OBJECT-GROUP
OBJECTS { cie1000MstpStatusInterfaceStatisticsInterfaceNo,
cie1000MstpStatusInterfaceStatisticsStpFrameXmits,
cie1000MstpStatusInterfaceStatisticsStpFrameReceived,
cie1000MstpStatusInterfaceStatisticsRstpFrameXmits,
cie1000MstpStatusInterfaceStatisticsRstpFrameReceived,
cie1000MstpStatusInterfaceStatisticsMstpFrameXmits,
cie1000MstpStatusInterfaceStatisticsMstpFrameReceived,
cie1000MstpStatusInterfaceStatisticsUnknownFramesReceived,
cie1000MstpStatusInterfaceStatisticsIllegalFrameReceived,
cie1000MstpStatusInterfaceStatisticsTcnFrameXmits,
cie1000MstpStatusInterfaceStatisticsTcnFrameReceived }
STATUS current
DESCRIPTION
"A collection of objects."
::= { cie1000MstpMibGroups 12 }
cie1000MstpMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the implementation."
MODULE -- this module
MANDATORY-GROUPS { cie1000MstpConfigBridgeParamsInfoGroup,
cie1000MstpConfigMstiParamTableInfoGroup,
cie1000MstpConfigMstiConfigIdInfoGroup,
cie1000MstpConfigMstiConfigTableInfoGroup,
cie1000MstpConfigMstiConfigVlanBitmapTableInfoGroup,
cie1000MstpConfigCistInterfaceParamTableInfoGroup,
cie1000MstpConfigAggrParamsInfoGroup,
cie1000MstpConfigMstiInterfaceParamTableInfoGroup,
cie1000MstpConfigMstiAggrParamTableInfoGroup,
cie1000MstpStatusBridgeTableInfoGroup,
cie1000MstpStatusInterfaceTableInfoGroup,
cie1000MstpStatusInterfaceStatisticsTableInfoGroup }
::= { cie1000MstpMibCompliances 1 }
END