1096 lines
42 KiB
Plaintext
1096 lines
42 KiB
Plaintext
-- This file was included in WWP MIB release 04-10-01-0027
|
|
WWP-LEOS-MSTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Counter32, Integer32 FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue FROM SNMPv2-TC
|
|
wwpModulesLeos FROM WWP-SMI;
|
|
|
|
wwpLeosMstp MODULE-IDENTITY
|
|
LAST-UPDATED "201108020000Z"
|
|
ORGANIZATION "Ciena, Inc"
|
|
CONTACT-INFO
|
|
" Mib Meister
|
|
115 North Sullivan Road
|
|
Spokane Valley, WA 99037
|
|
USA
|
|
Phone: +1 509 242 9000
|
|
Email: support@ciena.com"
|
|
DESCRIPTION
|
|
"Deprecated the wwpLeosMstpPvstBpduReceivedNotification mib"
|
|
REVISION "201108020000Z"
|
|
DESCRIPTION
|
|
"The MIB module for the WWP MstpMib specific information."
|
|
REVISION "200609291700Z"
|
|
DESCRIPTION
|
|
"Initial creation."
|
|
|
|
::= { wwpModulesLeos 37 } -- to be selected or moved
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
MstiInstanceIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each Multiple Spanning
|
|
Tree Instance (MSTI) in the managed Bridge. The value for each
|
|
MstiInstanceIndex remains constant for the instance."
|
|
SYNTAX Integer32 (1..64)
|
|
|
|
MstiOrCistInstanceIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention is an extension of the
|
|
MstiInstanceIndex convention. This extension permits the
|
|
additional value of zero, which means Common and Internal
|
|
Spanning Tree (CIST)."
|
|
SYNTAX Integer32 (0..64)
|
|
|
|
BpduCounter ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An optional counter of received or transmitted Bridge Protocol
|
|
Data Units of different types to/from a Port. The agent may
|
|
return the value 0 for any counter that is not supported."
|
|
SYNTAX Counter32
|
|
|
|
|
|
wwpLeosMstpNotifications OBJECT IDENTIFIER ::= { wwpLeosMstp 0 }
|
|
wwpLeosMstpObjects OBJECT IDENTIFIER ::= { wwpLeosMstp 1 }
|
|
wwpLeosMstpConformance OBJECT IDENTIFIER ::= { wwpLeosMstp 2 }
|
|
|
|
wwpLeosMstpCfg OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 1 }
|
|
wwpLeosMstpMstCfg OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 2 }
|
|
wwpLeosMstpXstCfg OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 3 }
|
|
wwpLeosMstpStats OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 4 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- wwpLeosMstpCfg OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 1 }
|
|
-- ---------------------------------------------------------------------
|
|
|
|
wwpLeosMstpBridgeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to true the MSTP operation
|
|
for the bridge is enabled. Setting this object to
|
|
false disables bridge MSTP operations."
|
|
DEFVAL { true }
|
|
::= { wwpLeosMstpCfg 1 }
|
|
|
|
wwpLeosMstpForceVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp(0),
|
|
rstp(2),
|
|
mstp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the ForceVersion
|
|
MSTP State Machine Performance Parameter."
|
|
DEFVAL { mstp }
|
|
::= { wwpLeosMstpCfg 2 }
|
|
|
|
wwpLeosMstpForwardDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (4..30)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value of the FwdDelay
|
|
MSTP State Machine Performance Parameter."
|
|
DEFVAL { 15 }
|
|
::= { wwpLeosMstpCfg 3 }
|
|
|
|
wwpLeosMstpTxHoldCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value of the TxHoldCount
|
|
MSTP State Machine Performance Parameter."
|
|
DEFVAL { 6 }
|
|
::= { wwpLeosMstpCfg 4 }
|
|
|
|
wwpLeosMstpHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value of the HelloTime
|
|
MSTP State Machine Performance Parameter."
|
|
DEFVAL { 2 }
|
|
::= { wwpLeosMstpCfg 5 }
|
|
|
|
wwpLeosMstpMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32 (6..40)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value of the Max Age
|
|
value used by the multiple spanning tree protocol."
|
|
DEFVAL { 20 }
|
|
::= { wwpLeosMstpCfg 6 }
|
|
|
|
wwpLeosMstpMaxHops OBJECT-TYPE
|
|
SYNTAX Integer32 (6..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value of the MaxHops
|
|
MSTP State Machine Performance Parameter."
|
|
DEFVAL { 20 }
|
|
::= { wwpLeosMstpCfg 7 }
|
|
|
|
wwpLeosMstpLoopbackBlock OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if loopback port blocking feature is
|
|
enabled/disabled for the multiple spanning tree protocol.
|
|
Values of true or false will enable or disable this feature,
|
|
respectively."
|
|
DEFVAL { false }
|
|
::= { wwpLeosMstpCfg 8 }
|
|
|
|
wwpLeosMstpPathCostDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp8021d1998(1),
|
|
stp8021t2001(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the Spanning Tree default Path Costs that
|
|
are to be used by this Bridge. A value of 8021d1998(1)
|
|
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
|
|
A value of stp8021t2001(2) uses the 32-bit default Path
|
|
Costs from IEEE Std. 802.1t."
|
|
DEFVAL { stp8021t2001 }
|
|
::= { wwpLeosMstpCfg 9 }
|
|
|
|
wwpLeosMstpGlobalStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rstp(1),
|
|
mstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For devices that contain multiple STP code-bases, this object
|
|
allows the selection of the desired Spanning Tree Protocol
|
|
code-base that is to be in effect. After a new value is
|
|
selected a configuration save and device reboot must be
|
|
performed for the new spanning tree code-base to take control
|
|
over spanning tree operations within the device.
|
|
|
|
The value of rstp(1) selects legacy RSTP code-base which
|
|
is typically a highly optimized code-base intended for devices
|
|
which are connected to other RSTP equipped devices. The value of
|
|
mstp(2) selects the MSTP code-base which offers inherent
|
|
backward compatibility for RSTP devices however this code-base
|
|
is optimized for MSTP operations and may not be desirable when
|
|
the device is operating in a network of only RSTP connected
|
|
devices."
|
|
DEFVAL { rstp }
|
|
::= { wwpLeosMstpCfg 10 }
|
|
|
|
|
|
|
|
wwpLeosMstpPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosMstpPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table that contains configuration items for each port.
|
|
This object has value similar to dot1dStpPortTable."
|
|
::= { wwpLeosMstpCfg 11 }
|
|
|
|
wwpLeosMstpPortCfgEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosMstpPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTP port information entry containing configuration items
|
|
specific to a particular port on the Bridge."
|
|
INDEX { wwpLeosMstpPortInfoIndex }
|
|
::= { wwpLeosMstpPortCfgTable 1 }
|
|
|
|
WwpLeosMstpPortCfgEntry ::= SEQUENCE {
|
|
wwpLeosMstpPortInfoIndex Integer32,
|
|
wwpLeosMstpPortEnable TruthValue,
|
|
wwpLeosMstpPortAdminExtPathCost Integer32,
|
|
wwpLeosMstpPortOperExtPathCost Integer32,
|
|
wwpLeosMstpPortDynamicExtPathCost TruthValue,
|
|
wwpLeosMstpPortAdminEdgePort TruthValue,
|
|
wwpLeosMstpPortOperEdgePort TruthValue,
|
|
wwpLeosMstpPortProtocolMigration TruthValue,
|
|
wwpLeosMstpPortAdminPointToPoint INTEGER,
|
|
wwpLeosMstpPortOperPointToPoint TruthValue,
|
|
wwpLeosMstpPortAutoEdge TruthValue,
|
|
wwpLeosMstpPortRestrictedRole TruthValue,
|
|
wwpLeosMstpPortRestrictedTcn TruthValue
|
|
}
|
|
|
|
wwpLeosMstpPortInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port number used as index in the table.
|
|
The value of this port id is similar to dot1dStpPort."
|
|
::= { wwpLeosMstpPortCfgEntry 1 }
|
|
|
|
wwpLeosMstpPortEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to true the mstp operation
|
|
for this port is enabled. Setting this object to
|
|
false disables mstp operations on this port."
|
|
DEFVAL { true }
|
|
::= { wwpLeosMstpPortCfgEntry 2 }
|
|
|
|
wwpLeosMstpPortAdminExtPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively configurable external path cost.
|
|
This object sets the ExternalPortPathCost MSTP State
|
|
Machine Performance Parameter when configured to use
|
|
manual port path cost values. This is used as the
|
|
CIST External Path Cost field for this port in BPDUs
|
|
and used in vector calculations for this port.
|
|
|
|
The default value for this object is system dependent."
|
|
::= { wwpLeosMstpPortCfgEntry 3 }
|
|
|
|
wwpLeosMstpPortOperExtPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational external path cost for this
|
|
port. Depending on the configuration, this may be the
|
|
administratively configured external path cost or a
|
|
value calculated by the system."
|
|
::= { wwpLeosMstpPortCfgEntry 4 }
|
|
|
|
wwpLeosMstpPortDynamicExtPathCost OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute enables or disables dynamic calculation
|
|
of the external path cost for the given port. Values
|
|
of true or false will enable or disable this feature,
|
|
respectively."
|
|
DEFVAL { true }
|
|
::= { wwpLeosMstpPortCfgEntry 5 }
|
|
|
|
wwpLeosMstpPortAdminEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of the Edge Port parameter. A
|
|
value of true indicates that this port should be
|
|
assumed as an edge-port and a value of false indicates
|
|
that this port should be assumed as a non-edge-port.
|
|
|
|
The default value for this object is system dependent."
|
|
::= { wwpLeosMstpPortCfgEntry 6 }
|
|
|
|
wwpLeosMstpPortOperEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational value of the Edge Port parameter.
|
|
The object is initialized to the value of
|
|
wwpLeosMstpPortAdminEdgePort and is set false on
|
|
reception of a BPDU."
|
|
::= { wwpLeosMstpPortCfgEntry 7 }
|
|
|
|
wwpLeosMstpPortProtocolMigration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to true, this object forces a spanning tree
|
|
migration check to initiate within the definitions of
|
|
the spanning tree state machines per IEEE.
|
|
Any other operation on this object has no effect and
|
|
it always returns false when read."
|
|
::= { wwpLeosMstpPortCfgEntry 8 }
|
|
|
|
wwpLeosMstpPortAdminPointToPoint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forceTrue(0),
|
|
forceFalse(1),
|
|
auto(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative point-to-point status of the LAN segment
|
|
attached to this port. A value of forceTrue indicates that
|
|
this port should always be treated as if it is connected to
|
|
a point-to-point link. A value of forceFalse indicates
|
|
that this port should be treated as having a shared media
|
|
connection. A value of auto indicates that this port is
|
|
considered to have a point-to-point link if it is an Aggregator
|
|
and all of its members are aggregatable, or if the MAC entity
|
|
is configured for full duplex operation, either through
|
|
auto-negotiation or by management means."
|
|
DEFVAL { auto }
|
|
::= { wwpLeosMstpPortCfgEntry 9 }
|
|
|
|
wwpLeosMstpPortOperPointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational point-to-point status of the LAN segment
|
|
attached to this port. It indicates whether a port is
|
|
considered to have a point-to-point connection or not.
|
|
The value is determined by management or by auto-detection,
|
|
as described in the wwpMtpPortAdminPointToPoint object."
|
|
::= { wwpLeosMstpPortCfgEntry 10 }
|
|
|
|
wwpLeosMstpPortAutoEdge OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the autoEdge parameter used by MSTP to
|
|
determine whether the value of wwpLeosMstpPortOperEdgePort
|
|
should be set to the value of wwpLeosMstpPortAdminEdgePort
|
|
or if it should be set according to the logic defined in
|
|
the Bridge Detection state machine."
|
|
DEFVAL { true }
|
|
::= { wwpLeosMstpPortCfgEntry 11 }
|
|
|
|
wwpLeosMstpPortRestrictedRole OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the restrictedRole parameter used by MSTP.
|
|
When true, the port will not be selected as the root port
|
|
for the CIST or any MSTI, even if it has the best spanning
|
|
tree priority vector. Such a port will be selected as an
|
|
alternate port after the root port has been selected.
|
|
When false, this port is allowed to be selected as the
|
|
root port."
|
|
DEFVAL { false }
|
|
::= { wwpLeosMstpPortCfgEntry 12 }
|
|
|
|
wwpLeosMstpPortRestrictedTcn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the restrictedTcn parameter used by MSTP.
|
|
When true, the port will not propagate received topology
|
|
change notifications and topology changes to other ports.
|
|
When false, normal topology change notification propagation
|
|
will occur on the port."
|
|
DEFVAL { false }
|
|
::= { wwpLeosMstpPortCfgEntry 13 }
|
|
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- wwpLeosMstpMstCfg OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 2 }
|
|
-- ---------------------------------------------------------------------
|
|
|
|
wwpLeosMstpMstCfgName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration name that identifies the MST
|
|
region and is used as one of the inputs in the
|
|
computation of the MST Configuration Identifier.
|
|
MSTP uses a fixed field of 32 characters when
|
|
computing the MST Configuration Identifier and
|
|
in MSTP BPDUs, when this object is set to a
|
|
string of characters less than 32 in length,
|
|
MST will fill in the remaining characters up
|
|
to character number 32 with NULL octets (hex
|
|
value 0x00).
|
|
|
|
The default value for this object is the Bridge
|
|
MAC address represented as an ASCII character
|
|
string in canonical format, using upper-case
|
|
hexadecimal letters and hyphens to represent
|
|
the 48-bit Bridge MAC, with the remaining
|
|
15 characters containing the NULL octet (hex
|
|
value 0x00)."
|
|
::= { wwpLeosMstpMstCfg 1 }
|
|
|
|
wwpLeosMstpMstCfgRevLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is used by MSTP as
|
|
the Revision Level field transmitted in MSTP
|
|
BPDUs and in the calculation of the MST
|
|
Configuration Identifier."
|
|
DEFVAL { 0 }
|
|
::= { wwpLeosMstpMstCfg 2 }
|
|
|
|
wwpLeosMstpMstCfgVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosMstpMstCfgVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MST Configuration Table used by MSTP to maintain the
|
|
VLAN-to-MSTI mapping and for the calculation of the MST
|
|
Configuration Digest. This table contains one entry for
|
|
each VlanId."
|
|
::= { wwpLeosMstpMstCfg 3 }
|
|
|
|
wwpLeosMstpMstCfgVlanEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosMstpMstCfgVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each MST Configuration Table entry contains the MSTI to
|
|
which the VLAN is mapped. When the MSTI value is zero,
|
|
the VLAN is mapped to the CIST."
|
|
INDEX { wwpLeosMstpMstCfgVlanIndex }
|
|
::= { wwpLeosMstpMstCfgVlanTable 1 }
|
|
|
|
WwpLeosMstpMstCfgVlanEntry ::= SEQUENCE {
|
|
wwpLeosMstpMstCfgVlanIndex Integer32,
|
|
wwpLeosMstpMstCfgMstiIndex MstiOrCistInstanceIndex
|
|
}
|
|
|
|
wwpLeosMstpMstCfgVlanIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VlanId for which this entry contains the CIST or MSTI
|
|
mapping."
|
|
::= { wwpLeosMstpMstCfgVlanEntry 1 }
|
|
|
|
wwpLeosMstpMstCfgMstiIndex OBJECT-TYPE
|
|
SYNTAX MstiOrCistInstanceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer with values ranging from 0 to 64 that identify a
|
|
the CIST/MSTI instance to which this VLAN is mapped. The
|
|
value of zero means this VLAN is mapped to the CIST, other
|
|
values indicate an MSTI mapping for this VLAN."
|
|
DEFVAL { 0 }
|
|
::= { wwpLeosMstpMstCfgVlanEntry 2 }
|
|
|
|
wwpLeosMstpMstCfgXstMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosMstpMstCfgXstMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing the VLAN to XST mapping information
|
|
from wwpLeosMstpMstCfgVlanTable in the format of VLAN-
|
|
mappings per CIST/MSTI. A single table entry exists for
|
|
the CIST and one entry for each MSTI. Each table entry
|
|
contains VLAN mappings indicating the VLAN identifiers
|
|
that are associated with the CIST or the particular MSTI.
|
|
|
|
This table is read-only and is intended to provide
|
|
management an efficient method of retrieving the VLAN/XST
|
|
mapping information. To modify the information within this
|
|
table, the wwpLeosMstpMstCfgVlanTable should be used."
|
|
::= { wwpLeosMstpMstCfg 4 }
|
|
|
|
wwpLeosMstpMstCfgXstMappingEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosMstpMstCfgXstMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row containing a bitmap of all VLAN identifiers
|
|
that are mapped to the CIST or specified MSTI. The mapping
|
|
of VLAN identifiers to CIST or MSTI is managed through the
|
|
wwpLeosMstpMstCfgVlanTable."
|
|
INDEX { wwpLeosMstpMstCfgXstMappingIndex }
|
|
::= { wwpLeosMstpMstCfgXstMappingTable 1 }
|
|
|
|
WwpLeosMstpMstCfgXstMappingEntry ::= SEQUENCE {
|
|
wwpLeosMstpMstCfgXstMappingIndex MstiOrCistInstanceIndex,
|
|
wwpLeosMstpMstCfgXstMapping1k OCTET STRING,
|
|
wwpLeosMstpMstCfgXstMapping2k OCTET STRING,
|
|
wwpLeosMstpMstCfgXstMapping3k OCTET STRING,
|
|
wwpLeosMstpMstCfgXstMapping4k OCTET STRING
|
|
}
|
|
|
|
wwpLeosMstpMstCfgXstMappingIndex OBJECT-TYPE
|
|
SYNTAX MstiOrCistInstanceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies an instance. The entry of this table
|
|
with index 0 represents the CIST. Non-zero index values
|
|
represent a particular MSTI."
|
|
::= { wwpLeosMstpMstCfgXstMappingEntry 1 }
|
|
|
|
wwpLeosMstpMstCfgXstMapping1k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit for each VLAN
|
|
identifier. The first octet represents VLAN identifier
|
|
values 0 through 7; the second octet represents
|
|
VLAN identifier values 8 through 15, etc. The most
|
|
significant bit of each octet corresponds to the
|
|
lowest VLAN identifier value for that octet.
|
|
|
|
This object represents VLAN identifier values
|
|
0 through 1023.
|
|
|
|
Note, the bit representing VLAN identifier value 0
|
|
will always be clear (bit value 0)."
|
|
::= { wwpLeosMstpMstCfgXstMappingEntry 2 }
|
|
|
|
wwpLeosMstpMstCfgXstMapping2k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit for each VLAN
|
|
identifier. The first octet represents VLAN identifier
|
|
values 1024 through 1031; the second octet represents
|
|
VLAN identifier values 1032 through 1039, etc. The most
|
|
significant bit of each octet corresponds to the
|
|
lowest VLAN identifier value for that octet.
|
|
|
|
This entire object represents VLAN identifier values
|
|
1024 through 2047."
|
|
::= { wwpLeosMstpMstCfgXstMappingEntry 3 }
|
|
|
|
wwpLeosMstpMstCfgXstMapping3k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit for each VLAN
|
|
identifier. The first octet represents VLAN identifier
|
|
values 2048 through 2055; the second octet represents
|
|
VLAN identifier values 2056 through 2063, etc. The most
|
|
significant bit of each octet corresponds to the
|
|
lowest VLAN identifier value for that octet.
|
|
|
|
This entire object represents VLAN identifier values
|
|
2048 through 3071."
|
|
::= { wwpLeosMstpMstCfgXstMappingEntry 4 }
|
|
|
|
wwpLeosMstpMstCfgXstMapping4k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit for each VLAN
|
|
identifier. The first octet represents VLAN identifier
|
|
values 3072 through 3079; the second octet represents
|
|
VLAN identifier values 3080 through 3087, etc. The most
|
|
significant bit of each octet corresponds to the
|
|
lowest VLAN identifier value for that octet.
|
|
|
|
This entire object represents VLAN identifier values
|
|
3072 through 4095.
|
|
|
|
Note, the bit representing VLAN identifier value 4095
|
|
will always be clear (bit value 0)."
|
|
::= { wwpLeosMstpMstCfgXstMappingEntry 5 }
|
|
|
|
wwpLeosMstpMstCfgIdDigest OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the Configuration Digest calculated
|
|
by MSTP and is used in MSTP BPDUs."
|
|
::= { wwpLeosMstpMstCfg 5 }
|
|
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- wwpLeosMstpXstCfg OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 3 }
|
|
-- ---------------------------------------------------------------------
|
|
|
|
wwpLeosMstpXstCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosMstpXstCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains CIST and MSTI configuration items for
|
|
the bridge. The CIST is identified as index 0 and
|
|
the MSTI entries use non-zero indices."
|
|
::= { wwpLeosMstpXstCfg 1 }
|
|
|
|
wwpLeosMstpXstCfgEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosMstpXstCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST or MSTI entry containing configuration items
|
|
for the CIST or the specified MSTI."
|
|
INDEX { wwpLeosMstpXstCfgIndex }
|
|
::= { wwpLeosMstpXstCfgTable 1 }
|
|
|
|
WwpLeosMstpXstCfgEntry ::= SEQUENCE {
|
|
wwpLeosMstpXstCfgIndex MstiOrCistInstanceIndex,
|
|
wwpLeosMstpXstCfgBridgePriority Integer32,
|
|
wwpLeosMstpXstCfgStatus RowStatus
|
|
}
|
|
|
|
wwpLeosMstpXstCfgIndex OBJECT-TYPE
|
|
SYNTAX MstiOrCistInstanceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index number for this entry. Zero refers to the CIST
|
|
and non-zero values refer to MSTI entries for this Bridge."
|
|
::= { wwpLeosMstpXstCfgEntry 1 }
|
|
|
|
wwpLeosMstpXstCfgBridgePriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Priority value used by the multiple spanning
|
|
tree protocol in vector calculations and in BPDUs.
|
|
For the CIST, this value is used in the CIST Bridge
|
|
Identifier and for MSTIs this value is used in the MSTI
|
|
Bridge Priority field of BPDUs."
|
|
DEFVAL { 8 }
|
|
::= { wwpLeosMstpXstCfgEntry 2 }
|
|
|
|
wwpLeosMstpXstCfgStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to manage the creation and deletion of the
|
|
conceptual rows in this table.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to 'createAndGo'.
|
|
To delete the entry set this to 'destroy'.
|
|
|
|
Table rows representing MSTIs may be created or
|
|
deleted using this object.
|
|
|
|
The table row representing the CIST (Index 0)
|
|
always exists, an attempt to delete this row
|
|
will result in an SNMP error."
|
|
::= { wwpLeosMstpXstCfgEntry 3 }
|
|
|
|
|
|
|
|
|
|
|
|
wwpLeosMstpXstPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosMstpXstPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of configuration items on a per-port per-CIST/MSTI
|
|
basis. For each port, there is a single CIST (index 0) and
|
|
multiple MSTIs (non-zero index values)."
|
|
::= { wwpLeosMstpXstCfg 2 }
|
|
|
|
wwpLeosMstpXstPortCfgEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosMstpXstPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry containing configuration items specific to a
|
|
particular port/CIST combination or port/MSTI combination.
|
|
Each port on the bridge has a single CIST (index 0) and
|
|
may have multiple MSTI configurations (non-zero indices)."
|
|
INDEX { wwpLeosMstpXstPortCfgPortIndex, wwpLeosMstpXstPortCfgXstIndex }
|
|
::= { wwpLeosMstpXstPortCfgTable 1 }
|
|
|
|
|
|
WwpLeosMstpXstPortCfgEntry ::= SEQUENCE {
|
|
wwpLeosMstpXstPortCfgPortIndex Integer32,
|
|
wwpLeosMstpXstPortCfgXstIndex MstiOrCistInstanceIndex,
|
|
wwpLeosMstpXstPortCfgPortPriority Integer32,
|
|
wwpLeosMstpXstPortCfgAdminIntPathCost Integer32,
|
|
wwpLeosMstpXstPortCfgOperIntPathCost Integer32,
|
|
wwpLeosMstpXstPortCfgDynamicIntPathCost TruthValue
|
|
}
|
|
|
|
wwpLeosMstpXstPortCfgPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port number used as index in the table.
|
|
The value of this port id is similar to dot1dStpPort."
|
|
::= { wwpLeosMstpXstPortCfgEntry 1 }
|
|
|
|
wwpLeosMstpXstPortCfgXstIndex OBJECT-TYPE
|
|
SYNTAX MstiOrCistInstanceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CIST or MSTI index number for this port. Zero
|
|
refers to the CIST and non-zero values refer to
|
|
MSTI entries for this port."
|
|
::= { wwpLeosMstpXstPortCfgEntry 2 }
|
|
|
|
wwpLeosMstpXstPortCfgPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port priority for this port used in vector calculations
|
|
and BPDUs. For the CIST for this port, this value is the
|
|
priority component of the CIST Port Priority. For MSTI
|
|
entries for this port, this value is the MSTI Port Priority."
|
|
DEFVAL { 8 }
|
|
::= { wwpLeosMstpXstPortCfgEntry 3 }
|
|
|
|
wwpLeosMstpXstPortCfgAdminIntPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively configurable internal path cost. For
|
|
the CIST for this port, this value is the CIST Internal Root
|
|
Path Cost. For MSTI entries for this port, this value is
|
|
the MSTI Internal Root Path Cost.
|
|
|
|
The default value for this object is system dependent."
|
|
::= { wwpLeosMstpXstPortCfgEntry 4 }
|
|
|
|
wwpLeosMstpXstPortCfgOperIntPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational internal path cost for either the
|
|
CIST or the specified MSTI. Depending on the configuration
|
|
this value may be the administratively configured internal
|
|
path cost or some other value determined by the system."
|
|
::= { wwpLeosMstpXstPortCfgEntry 5 }
|
|
|
|
wwpLeosMstpXstPortCfgDynamicIntPathCost OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute enables or disables dynamic calculation
|
|
of the internal path cost for the given port. When the
|
|
XstIndex is zero, this applies to the CIST Internal Root
|
|
Path Cost. When the XstIndex is non-zero, this applies
|
|
to the specified MSTI Internal Root Path Cost. Values
|
|
of true or false will enable or disable this feature,
|
|
respectively."
|
|
DEFVAL { true }
|
|
::= { wwpLeosMstpXstPortCfgEntry 6 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- wwpLeosMstpStats OBJECT IDENTIFIER ::= { wwpLeosMstpObjects 4 }
|
|
-- ---------------------------------------------------------------------
|
|
|
|
wwpLeosMstpBridgeStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows all MSTP bridge statistics to be cleared.
|
|
Setting this object to true will reset all statistics
|
|
maintained under the wwpLeosMstpStats branch to a value of
|
|
zero. Setting this object to false will have no effect.
|
|
This object always returns a value of false."
|
|
::= { wwpLeosMstpStats 1 }
|
|
|
|
wwpLeosMstpPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosMstpPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MSTP statistical information
|
|
about each port that is associated with this bridge."
|
|
::= { wwpLeosMstpStats 2 }
|
|
|
|
wwpLeosMstpPortStatsEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosMstpPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of statistics for each port of the bridge."
|
|
INDEX { wwpLeosMstpPortStatsIndex }
|
|
::= { wwpLeosMstpPortStatsTable 1 }
|
|
|
|
WwpLeosMstpPortStatsEntry ::= SEQUENCE {
|
|
wwpLeosMstpPortStatsIndex Integer32,
|
|
wwpLeosMstpPortStatsClear TruthValue,
|
|
wwpLeosMstpPortStatsRxTcnBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsRxCfgBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsRxRstBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsRxMstBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsTxTcnBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsTxCfgBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsTxRstBpdu BpduCounter,
|
|
wwpLeosMstpPortStatsTxMstBpdu BpduCounter
|
|
}
|
|
|
|
wwpLeosMstpPortStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port number used as index in the table.
|
|
The value of this port id is similar to dot1dStpPort."
|
|
::= { wwpLeosMstpPortStatsEntry 1 }
|
|
|
|
wwpLeosMstpPortStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows the port statistics contained within this
|
|
table entry to be cleared. Setting this object to true
|
|
will reset all statistics for this port to a value of
|
|
zero. Setting this object to false will have no effect.
|
|
This object always returns a value of false."
|
|
::= { wwpLeosMstpPortStatsEntry 2 }
|
|
|
|
wwpLeosMstpPortStatsRxTcnBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received Topology Change Notification (TCN)
|
|
messages for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 3 }
|
|
|
|
wwpLeosMstpPortStatsRxCfgBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received Configuration BPDUs for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 4 }
|
|
|
|
wwpLeosMstpPortStatsRxRstBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received RST BPDUs for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 5 }
|
|
|
|
wwpLeosMstpPortStatsRxMstBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received MST BPDUs for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 6 }
|
|
|
|
wwpLeosMstpPortStatsTxTcnBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted Topology Change Notification
|
|
(TCN) messages for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 7 }
|
|
|
|
wwpLeosMstpPortStatsTxCfgBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted Configuration BPDUs for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 8 }
|
|
|
|
wwpLeosMstpPortStatsTxRstBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted RST BPDUs for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 9 }
|
|
|
|
wwpLeosMstpPortStatsTxMstBpdu OBJECT-TYPE
|
|
SYNTAX BpduCounter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted MST BPDUs for this port."
|
|
::= { wwpLeosMstpPortStatsEntry 10 }
|
|
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- wwpLeosMstp - Traps/Notifications
|
|
-- -------------------------------------------------------------
|
|
wwpLeosMstpNewRootNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpXstCfgIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wwpLeosMstpNewRootNotification indicates
|
|
that the sending agent has become the new root of
|
|
the Spanning Tree for the specified XST (CIST or
|
|
MSTI). This notification is generated when the
|
|
Port Role Selection state machine invokes the
|
|
updtRolesTree procedure and this procedure operation
|
|
results in a calculation of a Root Priority Vector
|
|
for the XST which results in a value indicating that
|
|
the bridge itself has become the root bridge for the
|
|
XST."
|
|
::= { wwpLeosMstpNotifications 1 }
|
|
|
|
wwpLeosMstpTopologyChangeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex,
|
|
wwpLeosMstpXstCfgIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosMstpTopologyChangeNotification is sent
|
|
by a bridge for the specified XST when the Topology
|
|
Change state machine invokes the newTcWhile procedure
|
|
which causes the tcWhile timer for the specified port
|
|
and XST to change from a zero value to a non-zero value."
|
|
::= { wwpLeosMstpNotifications 2 }
|
|
|
|
wwpLeosMstpPortBackupNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosMstpPortBackupNotification is sent whenever
|
|
the MSTP state machine logic determines that a loop
|
|
has occurred and the received vector information
|
|
represents another port on the same device. This
|
|
notification is sent when the updtRolesTree procedure
|
|
determines that the designated bridge and designated
|
|
port components of the port priority vector reflect
|
|
another port on this bridge which results in the
|
|
selectedRole parameter for the CIST to transition to
|
|
BackupPort."
|
|
::= { wwpLeosMstpNotifications 3 }
|
|
|
|
wwpLeosMstpPvstBpduReceivedNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A wwpLeosMstpPvstBpduReceivedNotification is sent to
|
|
indicate that one or more PVST BPDUs have been received
|
|
on the port in the past 60 seconds. Each minute, all
|
|
ports are checked for reception of one or more PVST BPDUs
|
|
and this notification is generated if any PVST BPDUs
|
|
have been received."
|
|
::= { wwpLeosMstpNotifications 4 }
|
|
|
|
wwpLeosMstpSelfLoopNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosMstpSelfLoopNotification is sent whenever
|
|
device detects same cable connected to a port in a loop back.
|
|
This determination is made by comparing the layer-2 address
|
|
of the received frame with that of the bridge. This occurs
|
|
before the frame data reaches the MSTP state machine logic.
|
|
Also if loop-back blocking is enabled on the device then
|
|
mstp will block this port (self disable)."
|
|
::= { wwpLeosMstpNotifications 5 }
|
|
|
|
wwpLeosMstpPortOperEdgeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex,
|
|
wwpLeosMstpPortOperEdgePort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosMstpPortOperEdgeNotification is sent whenever
|
|
the MSTP state machine logic causes a change in the
|
|
operEdge parameter associated with the specified port."
|
|
::= { wwpLeosMstpNotifications 6 }
|
|
|
|
wwpLeosMstpPortFlapNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosMstpPortFlapNotification is sent whenever
|
|
device detects a port flapping.
|
|
|
|
This notification is generated under following criteria.
|
|
If device detects port flapped more than once
|
|
within 1 minute timer period and it has not sent
|
|
notification within last 5 minutes then it will
|
|
generate this notification."
|
|
::= { wwpLeosMstpNotifications 7 }
|
|
|
|
wwpLeosMstpBridgeRootPortLostNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosMstpPortInfoIndex,
|
|
wwpLeosMstpXstCfgIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosMstpBridgeRootPortLostNotification is sent
|
|
whenever device detects that bridge root port is lost
|
|
for a particular XST (CIST or MSTI). This notification
|
|
is generated when a link has gone down and the role
|
|
parameter for the CIST or any MSTI for that port is set
|
|
to Root Port.
|
|
|
|
This notification will indicate either the link failure
|
|
or link partner MSTP disabled."
|
|
::= { wwpLeosMstpNotifications 8 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- wwpLeosMstp - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
--- T.B.D.
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
--- T.B.D.
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
--- T.B.D.
|
|
|
|
END
|