WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/ciena/WWP-LEOS-CFM-MIB

8767 lines
318 KiB
Plaintext
Raw Permalink Blame History

-- This file was included in WWP MIB release 04-10-01-0027
--
-- WWP-LEOS-CFM-MIB.my
--
WWP-LEOS-CFM-MIB DEFINITIONS ::= BEGIN
IMPORTS
TimeTicks, Integer32, Unsigned32, Gauge32, Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, MacAddress, TEXTUAL-CONVENTION, RowStatus , TruthValue
FROM SNMPv2-TC
sysName
FROM RFC1213-MIB
wwpModulesLeos
FROM WWP-SMI;
wwpLeosCfmMIB MODULE-IDENTITY
LAST-UPDATED "201204110000Z"
ORGANIZATION "Ciena, Inc"
CONTACT-INFO
"Mib Meister
115 North Sullivan Road
Spokane Valley, WA 99037
USA
Phone: +1 509 242 9000
Email: support@ciena.com"
DESCRIPTION
"Connectivity Fault Management (CFM) MIB for configuration and monitoring CFM"
REVISION "201204110000Z"
DESCRIPTION
"Expanded value ranges for Delay fields to allow setting of the 'default' value (-1 for threshold,
0 for msgcount). Merged 6.x changes back into 4.x MIB to make them identical. Cleaned up history section
to conform to standard - REVISION comes before DESCRIPTION"
REVISION "201202030000Z"
DESCRIPTION
"Added new objects wwpLeosCfmServiceAccelerated,wwpLeosCfmRemoteMEPAccelerated and wwpLeosCfmExtMEPAccelerated.
Added a new table for query for port OAM capability."
REVISION "201107260000Z"
DESCRIPTION
"Added new objects wwpLeosCfmRemoteMEPServiceClear,wwpLeosCfmRemoteMEPServiceStatisticsClear"
REVISION "201105310000Z"
DESCRIPTION
"Deprecated objects wwpLeosCfmLBMDefaultCount,wwpLeosCfmLBMDefaultInterval,wwpLeosCfmLBMDefaultTimeout,
wwpLeosCfmFrameClassifierMode under wwpLeosCfmGlobal.
Added objects wwpLeosCfmGlobalLBMDefaultCount,wwpLeosCfmGlobalLBMDefaultInterval,wwpLeosCfmGlobalLBMDefaultTimeout,
wwpLeosCfmGlobalFrameClassifierMode under wwpLeosCfmGlobal.
Deprecated wwpLeosCfmServiceDefaultMEPType,wwpLeosCfmServiceMAID,wwpLeosCfmServiceMdIndex,wwpLeosCfmServiceMaintAssocNameType,
wwpLeosCfmServiceMaintAssocName under WwpLeosCfmServiceEntry.
Added wwpLeosCfmServiceY1731,wwpLeosCfmServiceCCMTxState,wwpLeosCfmServiceRMEPAging,wwpLeosCfmServiceMulticastDa,
wwpLeosCfmServiceChargedAgainstGlobalFrameBudget,wwpLeosCfmServiceCfmDefaultMEPType,wwpLeosCfmServiceCfmMAID,
wwpLeosCfmServiceCfmMdIndex,wwpLeosCfmServiceCfmMaintAssocNameType,wwpLeosCfmServiceCfmMaintAssocName,
wwpLeosCfmServiceCfmControlModuleFrameBudget under WwpLeosCfmService.
Added wwpLeosCfmLinkTraceMsgServiceName,wwpLeosCfmLinkTraceMsgSubPortName,wwpLeosCfmLinkTraceMsgVsIndex,
wwpLeosCfmLinkTraceMsgTotalTxLtm,wwpLeosCfmLinkTraceMsgTotalRxLtr under wwpLeosCfmLinkTraceMsg.
Added wwpLeosCfmLinkTraceMsgReplyIngressMacAddr,wwpLeosCfmLinkTraceMsgReplyEgressMacAddr under
WwpLeosCfmLinkTraceMsgReplyEntry.
Added wwpLeosCfmMEPDMMMinDelay,wwpLeosCfmMEPDMMMaxDelay,wwpLeosCfmMEPDMMMinJitter,wwpLeosCfmMEPDMMMaxJitter,
wwpLeosCfmMEPServiceName,wwpLeosCfmMEPSubPortName,wwpLeosCfmMEPVsPbtName,wwpLeosCfmMEPLogicalPortName,
wwpLeosCfmMEPSubPortIndex,wwpLeosCfmMEPEncapsulation,wwpLeosCfmMEPLeadPortBayIndex,wwpLeosCfmMEPLeadPortShelfIndex,
wwpLeosCfmMEPLeadPortModuleIndex,wwpLeosCfmMEPPBTBvid,wwpLeosCfmMEPPBTEtype,wwpLeosCfmMEPNumLbmTxmt, wwpLeosCfmMEPNumLbmReceived,
wwpLeosCfmMEPNumLoopbackRepliesReceived,wwpLeosCfmMEPNumLTRepliesTxmt, wwpLeosCfmMEPNumLTRepliesReceived,
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived,wwpLeosCfmMEPNumCCMReceived under wwpLeosCfmMEPEntry.
Deprecated wwpLeosCfmRemoteMEPHoldState under wwpLeosCfmRemoteMEP.
Added wwpLeosCfmRemoteMEPMinDelay,wwpLeosCfmRemoteMEPMaxDelay,wwpLeosCfmRemoteMEPMinJitter,wwpLeosCfmRemoteMEPMaxJitter,
wwpLeosCfmRemoteCfmMEPHoldState,wwpLeosCfmRemoteMEPSubPortName,wwpLeosCfmRemoteMEPServiceName ,wwpLeosCfmRemoteMEPBayIndex,
wwpLeosCfmRemoteMEPShelfIndex,wwpLeosCfmRemoteMEPModuleIndex ,wwpLeosCfmRemoteMEPPreviousBayIndex,
wwpLeosCfmRemoteMEPPreviousShelfIndex ,wwpLeosCfmRemoteMEPPreviousModuleIndex,wwpLeosCfmRemoteMEPLastPortStatus,
wwpLeosCfmRemoteMEPLastInterfaceStatus,wwpLeosCfmRemoteMEPLastSeqNum, wwpLeosCfmRemoteMEPCCMSeqErrors,
wwpLeosCfmRemoteMEPCCMLevel,wwpLeosCfmRemoteMEPDeleteAll under wwpLeosCfmRemoteMEPEntry.
Deprecated the table wwpLeosCfmPortStackTable .
Added wwpLeosCfmServiceVsPbtName under WwpLeosCfmServiceFaultEntry.
Added wwpLeosCfmDelayMsgMaxDelayThreshold, wwpLeosCfmDelayMsgMaxJitterThreshold under wwpLeosCfmDelayMsgEntry.
Added wwpLeosCfmExtMEPDMMMinDelay,wwpLeosCfmExtMEPDMMMaxDelay,wwpLeosCfmExtMEPDMMMinJitter,wwpLeosCfmExtMEPDMMMaxJitter
under wwpLeosCfmExtMEPEntry.
Added wwpLeosCfmExtMEPLastStatsDMMMinDelay,wwpLeosCfmExtMEPLastStatsDMMMaxDelay,wwpLeosCfmExtMEPLastStatsDMMMinJitter,
wwpLeosCfmExtMEPLastStatsDMMMaxJitter under wwpLeosCfmExtMEPLastStatsEntry.
Added wwpLeosCfmExtDelayMsgMaxDelayThreshold,wwpLeosCfmExtDelayMsgMaxJitterThreshold under wwpLeosCfmExtDelayMsgEntry.
Added new tables wwpLeosCfmGlobalFrameBudgetTable,wwpLeosCfmServiceFrameBudgetTable,wwpLeosCfmExtPortStackTable,
wwpLeosCfmExtMEPDelayHistoryTable,wwpLeosTceCfmMipTable,wwpLeosTceCfmMipCCMDbTable,wwpLeosTceCfmLoopbackMsgTable,
wwpLeosTceCfmPortStackTable,wwpLeosTceCfmMEPTable,wwpLeosTceCfmDelayMsgTable,wwpLeosTceCfmFrameLossMsgTable.
Added new notifications wwpLeosCfmFaultTrapSet,wwpLeosCfmFaultTrapClear,wwpLeosCfmDmmTrap,wwpLeosCfmLmmTrap."
REVISION "201101310000Z"
DESCRIPTION
"Deprecated object wwpLeosCfmPbtFaultTrap."
REVISION "201007150000Z"
DESCRIPTION
"Added wwpLeosCfmLBMDefaultCount, wwpLeosCfmLBMDefaultInterval, wwpLeosCfmLBMDefaultTimeout,
and wwpLeosCfmFrameClassifierMode under wwpLeosCfmGlobal.
Added wwpLeosCfmTotalRxDropBlockedOppositeMep under wwpLeosCfmGlobalStats.
Added wwpLeosCfmServiceMAID, wwpLeosCfmServiceMdIndex, wwpLeosCfmServiceMaintAssocNameType,
and wwpLeosCfmServiceMaintAssocName under WwpLeosCfmServiceEntry.
Added wwpLeosCfmLoopbackMsgDefaultInterval and wwpLeosCfmLoopbackMsgDefaultTimeout
under WwpLeosCfmLoopbackMsgEntry.
Added wwpLeosCfmMaintenanceDomainMdFormat, wwpLeosCfmMaintenanceDomainMdName, and
wwpLeosCfmMaintenanceDomainStatus under WwpLeosCfmMaintenanceDomainEntry.
Added wwpLeosCfmExtLoopbackMsgInterval, wwpLeosCfmExtLoopbackMsgTimeout,
and wwpLeosCfmExtLoopbackMsgLoss under WwpLeosCfmExtLoopbackMsgEntry.
Added wwpLeosCfmExtMEPBlockOppositeFaultCurrent, wwpLeosCfmExtMEPBlockOppositeFaultThreshold,
and wwpLeosCfmExtMEPBlockOppositeFaultTime under WwpLeosCfmExtMEPEntry.
Added wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep under WwpLeosCfmExtMEPStatsEntry.
Added wwpLeosCfmBlockOppositeMEPSetTrap and wwpLeosCfmBlockOppositeMEPClearTrap under
wwpLeosCfmNotifMIBNotification."
REVISION "200911160000Z"
DESCRIPTION
"Added wwpLeosCfmExtMEPLMMMissingSequence under wwpLeosCfmExtMEPEntry"
REVISION "200909041700Z"
DESCRIPTION
"Added wwpLeosCfmExtMipTable under wwpLeosCfmExtMIBObj"
REVISION "200908061900Z"
DESCRIPTION
"Added wwpLeosCfmRemoteMEPBadSequence under wwpLeosCfmRemoteMEPEntry"
REVISION "200907301900Z"
DESCRIPTION
"Added wwpLeosCfmL2LoopDetectState, wwpLeosCfmDot1adStrict, wwpLeosCfmMipLevelEnforcement and wwpLeosCfmMipCcmDbState
under wwpLeosGlobal
Added wwpLeosCfmServiceDefaultMEPType under wwpLeosCfmServiceEntry.
Added wwpLeosCfmRemoteMEPCCMComment under wwpLeosCfmRemoteMEPEntry.
Added wwpLeosCfmExtMEPLMMBadSequence and wwpLeosCfmExtMEPCCMComment under wwpLeosCfmExtMEPEntry.
Added wwpLeosCfmExtMEPLastStatsFrameLossBadSequence under wwpLeosCfmExtMEPLastStatsEntry.
Added wwpLeosCfmExtFrameLossMsgSeqThreshold under wwpLeosCfmExtFrameLossMsgEntry.
Added wwpLeosCfmBadSequenceFaultTrap under wwpLeosCfmNotifMIBNotification."
REVISION "200811141700Z"
DESCRIPTION
"Added wwpLeosCfmExtInterfaceStackTable under wwpLeosCfmExtMIBObj
Added wwpLeosCfmExtMepCfmServiceName, wwpLeosCfmExtMepInterfaceName, wwpLeosCfmExtMepServiceInstanceName,
wwpLeosCfmExtMepLogicalPortName to wwpLeosCfmExtMepEntryTable
Added wwpLeosCfmFaultTrapSet and wwpLeosCfmFaultTrapClear Notifications"
REVISION "200810231700Z"
DESCRIPTION
"Added wwpLeosCfmExtLoopback, wwpLeosCfmExtMEP, wwpLeosCfmExtLinkTrace,
wwpLeosCfmExtDelay and wwpLeosCfmExtFrameLoss tables under wwpLeosCfmExtMIBObj.
Added wwpLeosCfmServiceRemoteMepDiscovery under wwpLeosCfmServiceTableEntry.
Added wwpLeosCfmRemoteMEPHoldState and wwpLeosCfmRemoteMEPRowStatus."
REVISION "200710241700Z"
DESCRIPTION
"changed the properties on the WwpLeosCfmServiceFaultTable to read
only"
REVISION "200604181700Z"
DESCRIPTION
"Initial creation."
::= { wwpModulesLeos 35 }
--
-- Node definitions
--
--wwpLeosCfmMIBObjects
wwpLeosCfmMIBObjects OBJECT IDENTIFIER ::= { wwpLeosCfmMIB 1 }
wwpLeosCfmGlobal OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 1 }
wwpLeosCfmService OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 2 }
wwpLeosCfmMIP OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 3 }
wwpLeosCfmLinkTrace OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 4 }
wwpLeosCfmLoopback OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 5 }
wwpLeosCfmMaintenance OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 6 }
wwpLeosCfmMEP OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 7 }
wwpLeosCfmRemoteMEP OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 8 }
wwpLeosCfmStack OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 9 }
wwpLeosCfmMipCCMDb OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 10 }
wwpLeosCfmFaultNotif OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 11 }
wwpLeosCfmDelay OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 12 }
wwpLeosCfmFrameLoss OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 13 }
wwpLeosCfmRemoteMEPCCMLoss OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 14 }
wwpLeosCfmExtStack OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 15 }
wwpLeosCfmServiceFrameBudget OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 16}
wwpLeosCfmExtMIBObj OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 21 }
--wwpLeosCfmGlobal
wwpLeosCfmGlobalFrameBudget OBJECT IDENTIFIER ::= { wwpLeosCfmGlobal 24 }
wwpLeosCfmGlobalStats OBJECT IDENTIFIER ::= {wwpLeosCfmGlobal 25}
--wwpLeosCfmGlobalStats
wwpLeosCfmGlobalCCMStats OBJECT IDENTIFIER ::= { wwpLeosCfmGlobalStats 26}
wwpLeosCfmGlobalLoopbackStats OBJECT IDENTIFIER ::= { wwpLeosCfmGlobalStats 27}
wwpLeosCfmGlobalLinkTraceStats OBJECT IDENTIFIER ::= { wwpLeosCfmGlobalStats 28}
wwpLeosCfmGlobalDelayMeasurementStats OBJECT IDENTIFIER ::= { wwpLeosCfmGlobalStats 29 }
wwpLeosCfmGlobalLossMeasurementStats OBJECT IDENTIFIER ::= { wwpLeosCfmGlobalStats 30}
--wwpLeosCfmExtMIBObj
wwpLeosCfmExtLoopback OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 3 }
wwpLeosCfmExtMEP OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 7 }
wwpLeosCfmExtLinkTrace OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 8 }
wwpLeosCfmExtDelay OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 12 }
wwpLeosCfmExtFrameLoss OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 13 }
wwpLeosCfmExtInterfaceStack OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 14 }
wwpLeosCfmExtMIP OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 15 }
wwpLeosCfmExtInterfaceMIP OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 16 }
wwpLeosCfmExtOamPort OBJECT IDENTIFIER ::= { wwpLeosCfmExtMIBObj 17 }
-- Notifications
wwpLeosCfmNotifMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosCfmMIB 2 }
wwpLeosCfmNotifMIBNotification OBJECT IDENTIFIER ::= { wwpLeosCfmNotifMIBNotificationPrefix 0 }
-- Conformance information
wwpLeosCfmMIBConformance OBJECT IDENTIFIER ::= { wwpLeosCfmMIB 3 }
wwpLeosCfmMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosCfmMIBConformance 1 }
wwpLeosCfmMIBGroups OBJECT IDENTIFIER ::= { wwpLeosCfmMIBConformance 2 }
CfmMAID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"Binary data representing the md name and ma name."
SYNTAX OCTET STRING(SIZE(1..48))
CfmDisplayString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"Represents the cfm display string."
SYNTAX OCTET STRING (SIZE(1..2))
EthType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"Represents the ethernet type."
SYNTAX OCTET STRING (SIZE(1..2))
SendState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the action for the row.
Send (1): the message with the corresponding parameters
is to be sent to the Target host
Clear (2): Clears the counters of the particular entry
Cancel (3)"
SYNTAX INTEGER {
send(1),
clear(2),
cancel(3),
none(99)
}
Dot1agCfmMaintDomainNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a type (and thereby the format)
of a Dot1agCfmMaintDomainName. The value can be one of
the following:
ieeeReserved(0) Reserved for definition by IEEE 802.1
recommend to not use zero unless
absolutely needed.
none(1) No format specified, usually because
there is not (yet) a Maintenance
Domain Name. In this case, a zero
length OCTET STRING for the Domain
Name field is acceptable.
dnsLikeName(2) Domain Name like string, globally unique
text string derived from a DNS name.
macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
charString(4) RFC2579 DisplayString, except that the
character codes 0-31 (decimal) are not
used.
ieeeReserved(xx) Reserved for definition by IEEE 802.1
xx values can be [5..31] and [64..255]
ituReserved(xx) Reserved for definition by ITU-T Y.1731
xx values range from [32..63]
"
REFERENCE
"802.1ag clause 21.6.5, Table 21-19"
SYNTAX INTEGER {
none (1),
dnsLikeName (2),
macAddressAndUint (3),
charString (4)
}
Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Maintenance Domain Name."
REFERENCE
"802.1ag clause 21.6.5"
SYNTAX OCTET STRING (SIZE(1..43))
Dot1agCfmMaintAssocNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a type (and thereby the format)
of a Dot1agCfmMaintAssocName. The value can be one of
the following:
ieeeReserved(0) Reserved for definition by IEEE 802.1
recommend to not use zero unless
absolutely needed.
primaryVid(1) Primary VLAN ID.
12 bits represented in a 2-octet integer:
- 4 least significant bits of the first
byte contains the 4 most significant
bits of the 12 bits primary VID
- second byte contains the 8 least
significant bits of the primary VID
0 1 2 3 4 5 6 7 8
+-+-+-+-+-+-+-+-+
|0 0 0 0| (MSB) |
+-+-+-+-+-+-+-+-+
| VID LSB |
+-+-+-+-+-+-+-+-+
charString(2) RFC2579 DisplayString, except that the
character codes 0-31 (decimal) are not
used. (1..45) octets
unsignedInt16 (3) 2-octet integer/big endian
rfc2865VpnId(4) RFC 2685 VPN ID
3 octet VPN authority Organizationally
Unique Identifier followed by 4 octet VPN
index identifying VPN according to the OUI:
0 1 2 3 4 5 6 7 8
+-+-+-+-+-+-+-+-+
| VPN OUI (MSB) |
+-+-+-+-+-+-+-+-+
| VPN OUI |
+-+-+-+-+-+-+-+-+
| VPN OUI (LSB) |
+-+-+-+-+-+-+-+-+
|VPN Index (MSB)|
+-+-+-+-+-+-+-+-+
| VPN Index |
+-+-+-+-+-+-+-+-+
| VPN Index |
+-+-+-+-+-+-+-+-+
|VPN Index (LSB)|
+-+-+-+-+-+-+-+-+
ieeeReserved(xx) Reserved for definition by IEEE 802.1
xx values can be [5..31] and [64..255]
ituReserved(xx) Reserved for definition by ITU-T Y.1731
xx values range from [32..63]
"
REFERENCE
"802.1ag clause 21.6.5.4, Table 21-20"
SYNTAX INTEGER {
primaryVid (1),
charString (2),
unsignedInt16 (3),
rfc2865VpnId (4),
iccBased (32)
}
Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Maintenance Association Name. It is the
part of the Maintenance Association Identifier which is
unique within the Maintenance Domain Name and is appended
to the Maintenance Domain Name to form the Maintenance
Association Identifier (MAID).
"
REFERENCE
"802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
SYNTAX OCTET STRING (SIZE(1..45))
--
--Global Attributes
--
wwpLeosCfmState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to globally configure CFM state."
::= { wwpLeosCfmGlobal 1 }
wwpLeosCfmEtherType OBJECT-TYPE
SYNTAX EthType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Ethernet type value for CFM frames."
::= { wwpLeosCfmGlobal 2 }
wwpLeosCfmMEPHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Time in ms to hold a MEP in an inactive state."
::= { wwpLeosCfmGlobal 3 }
wwpLeosCfmCcmAvailable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current CCM available."
::= { wwpLeosCfmGlobal 4 }
wwpLeosCfmY1731EtherType OBJECT-TYPE
SYNTAX EthType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Optional Alternate Ethernet type for Y.1731 frames."
::= { wwpLeosCfmGlobal 5 }
wwpLeosCfmL2LoopDetectState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to globally configure CFM's Layer 2 Loop
detection state. Frames received by the switch that have a
Source MAC of the the switch will be discarded."
::= { wwpLeosCfmGlobal 6 }
wwpLeosCfmDot1adStrict OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls compliance of processing 802.1ad encapsulated CFM frames in accordance with the 8021.ag standard.
When on (1) CFM frames containing more than one VLAN tag are forwarded as normal data frames, bypassing processing by MEPs and MIPs.
When off (2) CFM frames with multiple VLAN tags are subject to normal CFM processing."
::= { wwpLeosCfmGlobal 7}
wwpLeosCfmMipLevelEnforcement OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls enforcement of a MIPs associated MD Level.
When on (1) a MIP will only process CFM messages received at its level.
When off (2) a MIP will process frames received at any level."
::= {wwpLeosCfmGlobal 8}
wwpLeosCfmMipCcmDbState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state of the MIP CCM Database.
A MIP only records CCMs in the MIP CCM Database when this object is set to enable (1)."
::= {wwpLeosCfmGlobal 9}
--deprecated
wwpLeosCfmLBMDefaultCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The global default loopback message count."
::= { wwpLeosCfmGlobal 10 }
--deprecated
wwpLeosCfmLBMDefaultInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The global default loopback message interval."
::= { wwpLeosCfmGlobal 11 }
--deprecated
wwpLeosCfmLBMDefaultTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The global default loopback message timeout."
::= { wwpLeosCfmGlobal 12 }
--deprecated
wwpLeosCfmFrameClassifierMode OBJECT-TYPE
SYNTAX INTEGER {
etype(1),
etypeMd(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configures the hardware frame classification mode used to detect CFM
and Y.1731 frames that should be sent to the CPU for processing. Changing
this mode will cause a reboot of the device."
::= {wwpLeosCfmGlobal 13}
--Deprecated OIDs 14,15 in 5305 MIB
wwpLeosCfmGlobalLBMDefaultCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global default loopback message count."
::= { wwpLeosCfmGlobal 16 }
wwpLeosCfmGlobalLBMDefaultInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global default loopback message interval."
::= { wwpLeosCfmGlobal 17 }
wwpLeosCfmGlobalLBMDefaultTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global default loopback message timeout."
::= { wwpLeosCfmGlobal 18 }
wwpLeosCfmGlobalFrameClassifierMode OBJECT-TYPE
SYNTAX INTEGER {
etype(1),
etypeMd(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the hardware frame classification mode used to detect CFM
and Y.1731 frames that should be sent to the CPU for processing. Changing
this mode will cause a reboot of the device."
::= {wwpLeosCfmGlobal 19}
--
-- wwpLeosCfmGlobalStats
--
wwpLeosCfmStatsTotalTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent."
::= { wwpLeosCfmGlobalStats 1 }
wwpLeosCfmStatsTotalRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received."
::= { wwpLeosCfmGlobalStats 2 }
wwpLeosCfmStatsTxFloodedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Flooded frames sent."
::= { wwpLeosCfmGlobalStats 3 }
wwpLeosCfmStatsTxFloodedIgnoredStpState OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of flooded ignored frames sent."
::= { wwpLeosCfmGlobalStats 4 }
wwpLeosCfmStatsRxTotalValidFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames received."
::= { wwpLeosCfmGlobalStats 5 }
wwpLeosCfmStatsRxTotalNotValidatedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of not validated frames received."
::= { wwpLeosCfmGlobalStats 6 }
wwpLeosCfmStatsRxTotalInValidFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid frames received."
::= { wwpLeosCfmGlobalStats 7 }
wwpLeosCfmTotalRxInvalidMessageOverflow OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid message overflow frames received."
::= { wwpLeosCfmGlobalStats 8 }
wwpLeosCfmTotalRxInvalidPortStatusTLV OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid port status TLV received."
::= { wwpLeosCfmGlobalStats 9 }
wwpLeosCfmTotalRxInvalidInterfaceStatusTLV OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid interface status TLV received."
::= { wwpLeosCfmGlobalStats 10 }
wwpLeosCfmTotalRxInvalidSenderIDTLV OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid sender ID TLV received."
::= { wwpLeosCfmGlobalStats 11 }
wwpLeosCfmRxAdminDisableDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped when in admin disable mode."
::= { wwpLeosCfmGlobalStats 12 }
wwpLesoCfmRxInvalidEtypeDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped when in admin disable mode."
::= { wwpLeosCfmGlobalStats 13 }
wwpLeosCfmRxInvalidOpCodeDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Invalid Opcode frames dropped."
::= { wwpLeosCfmGlobalStats 14 }
wwpLeosCfmRxSTPStateNotForwardingDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped when system is not in STP forwarding mode."
::= { wwpLeosCfmGlobalStats 15 }
wwpLeosCfmGlobalStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear will clear statistics globally
(Global Stats, Service Stats and Mep Stats).
This object cannot be set to none."
::= { wwpLeosCfmGlobalStats 16 }
wwpLeosCfmGlobalLoopbackMsgStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear will clear Loopback Statistics
globally(Global stats, Service Stats and Mep Stats)."
::= { wwpLeosCfmGlobalStats 17 }
wwpLeosCfmGlobalLinkTraceMsgStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear will clear Link Trace Statistics
globally(Global stats, Service Stats and Mep Stats)."
::= { wwpLeosCfmGlobalStats 18 }
wwpLeosCfmGlobalDelayMeasurementMsgStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear will clear Delay Measurement
Statistics globally(Global stats, Service Stats and Mep Stats)."
::= { wwpLeosCfmGlobalStats 19 }
wwpLeosCfmGlobalLossMeasurementMsgStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear will clear Loss Measurement
Statistics globally(Global stats, Service Stats and Mep Stats)."
::= { wwpLeosCfmGlobalStats 20 }
wwpLeosCfmTotalRxDropBlockedOppositeMep OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Blocked by Opposite Mep frames dropped."
::= { wwpLeosCfmGlobalStats 21 }
--
--wwpLeosCfmGlobalCCMStats
--
wwpLeosCfmTotalTxCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CCM frames sent."
::= { wwpLeosCfmGlobalCCMStats 1 }
wwpLeosCfmTotalTxCCMFlooded OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of flooded CCM frames sent."
::= { wwpLeosCfmGlobalCCMStats 2 }
wwpLeosCfmTotalRxValidCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames received."
::= { wwpLeosCfmGlobalCCMStats 3 }
wwpLeosCfmTotalRxCCMInSequence OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CCM frames received in sequence."
::= { wwpLeosCfmGlobalCCMStats 4 }
wwpLeosCfmTotalRxCCMSequenceError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errored CCM frames received in sequence."
::= { wwpLeosCfmGlobalCCMStats 5 }
wwpLeosCfmTotalCCMRxMDLevelXcon OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MD Level CFM frames received."
::= { wwpLeosCfmGlobalCCMStats 6 }
wwpLeosCfmTotalCCMRxMAIDXcon OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAID Xcon CFM frames received."
::= { wwpLeosCfmGlobalCCMStats 7 }
wwpLeosCfmTotalRxCCMErrorOnMepId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped when in admin disable mode."
::= { wwpLeosCfmGlobalCCMStats 8 }
wwpLeosCfmTotalRxCCMIntervalError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interval error frames received."
::= { wwpLeosCfmGlobalCCMStats 9 }
wwpLeosCfmTotalRxInvalidCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid CCM frames received."
::= { wwpLeosCfmGlobalCCMStats 10 }
--
--wwpLeosCfmGlobalLoopbackStats
--
wwpLeosCfmTotalTxLBM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Loopback messages sent."
::= { wwpLeosCfmGlobalLoopbackStats 1 }
wwpLeosCfmTotalTxLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Loopback Replies frames sent."
::= { wwpLeosCfmGlobalLoopbackStats 2 }
wwpLeosCfmTotalRxInOderLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of In order LBR frames received."
::= { wwpLeosCfmGlobalLoopbackStats 3 }
wwpLeosCfmTotalRxOOOLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Out of Order LBR frames received."
::= { wwpLeosCfmGlobalLoopbackStats 4 }
wwpLeosCfmTotalRxContentMismatchLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Content Mismatch LBR frames received."
::= { wwpLeosCfmGlobalLoopbackStats 5 }
wwpLeosCfmTotalRxUnexpectedLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unexpected LBR frames received."
::= { wwpLeosCfmGlobalLoopbackStats 6 }
wwpLeosCfmTotalRxInvalidLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid LBR frames received."
::= { wwpLeosCfmGlobalLoopbackStats 7 }
wwpLeosCfmTotalRxvalidLBM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid LBM frames received."
::= { wwpLeosCfmGlobalLoopbackStats 8 }
wwpLeosCfmTotalRxInvalidLBM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid LBM frames received."
::= { wwpLeosCfmGlobalLoopbackStats 9 }
--
--wwpLeosCfmGlobalLinkTraceStats
--
wwpLeosCfmTotalTxLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LTM frames sent."
::= { wwpLeosCfmGlobalLinkTraceStats 1 }
wwpLeosCfmTotalTxLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LTR frames sent."
::= { wwpLeosCfmGlobalLinkTraceStats 2 }
wwpLeosCfmTotalRxValidLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LTM frames received."
::= { wwpLeosCfmGlobalLinkTraceStats 3 }
wwpLeosCfmTotalRxValidLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Valid LTR frames received."
::= { wwpLeosCfmGlobalLinkTraceStats 4 }
wwpLeosCfmTotalRxUnexpectedLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected LTR frames received."
::= { wwpLeosCfmGlobalLinkTraceStats 5 }
wwpLeosCfmTotalRxInvalidLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Invalid LTR frames received."
::= { wwpLeosCfmGlobalLinkTraceStats 6 }
wwpLeosCfmInvalidLTRRelayAction OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Invalid LTR Action."
::= { wwpLeosCfmGlobalLinkTraceStats 7 }
wwpLeosCfmTotalRxInvalidLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Invalid LTM frames received."
::= { wwpLeosCfmGlobalLinkTraceStats 8 }
wwpLeosCfmRxUnresolvedLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Unresolved LTM frames received."
::= { wwpLeosCfmGlobalLinkTraceStats 9 }
--
--wwpLeosCfmGlobalDelayMeasurementStats
--
wwpLeosCfmTotalTxDMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Delay Measurements messages sent."
::= {wwpLeosCfmGlobalDelayMeasurementStats 1 }
wwpLeosCfmTotalTxDMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Delay Measurements Reply sent."
::= {wwpLeosCfmGlobalDelayMeasurementStats 2 }
wwpLeosCfmTotalRxDMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Delay Measurements Messages received."
::= {wwpLeosCfmGlobalDelayMeasurementStats 3 }
wwpLeosCfmTotalRxDMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Delay Measurements Reply received."
::= {wwpLeosCfmGlobalDelayMeasurementStats 4 }
--
-- wwpLeosCfmGlobalLossMeasurementStats
--
wwpLeosCfmTotalTxLMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Loss Measurements messages sent."
::= {wwpLeosCfmGlobalLossMeasurementStats 1 }
wwpLeosCfmTotalTxLMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Loss Measurements Reply frames sent."
::= {wwpLeosCfmGlobalLossMeasurementStats 2 }
wwpLeosCfmTotalRxLMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LMM received."
::= { wwpLeosCfmGlobalLossMeasurementStats 3 }
wwpLeosCfmTotalRxLMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LMR received."
::= { wwpLeosCfmGlobalLossMeasurementStats 4 }
--
-- wwpLeosCfmGlobalFrameBudgetTable
--
wwpLeosCfmGlobalControlModuleFrameBudget OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Control Module Frame Budget .
Not applicable to 6.x"
::= { wwpLeosCfmGlobalFrameBudget 1 }
wwpLeosCfmGlobalFrameBudgetTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmGlobalFrameBudgetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Global Frame Budget Table"
::= { wwpLeosCfmGlobalFrameBudget 2 }
wwpLeosCfmGlobalFrameBudgetEntry OBJECT-TYPE
SYNTAX WwpLeosCfmGlobalFrameBudgetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmServiceTable.
Not applicable to 6.x"
INDEX {wwpLeosCfmGlobalFrameBudgetSlotIndex}
::= { wwpLeosCfmGlobalFrameBudgetTable 1 }
WwpLeosCfmGlobalFrameBudgetEntry ::= SEQUENCE {
wwpLeosCfmGlobalFrameBudgetSlotIndex Unsigned32,
wwpLeosCfmGlobalFrameBudgetValue Counter32
}
wwpLeosCfmGlobalFrameBudgetSlotIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot Index"
::= { wwpLeosCfmGlobalFrameBudgetEntry 1}
wwpLeosCfmGlobalFrameBudgetValue OBJECT-TYPE
SYNTAX Counter32
UNITS "frames/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame budget value"
::= { wwpLeosCfmGlobalFrameBudgetEntry 2}
--
-- CFM Service Table
--
wwpLeosCfmServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM Service Table.
To create an entry in this table the following criteria
must be followed:
wwpLeosCfmServiceType must be specified.
wwpLeosCfmServiceValue must be specified.
wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo.
"
::= { wwpLeosCfmService 1 }
wwpLeosCfmServiceEntry OBJECT-TYPE
SYNTAX WwpLeosCfmServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmServiceTable."
INDEX {wwpLeosCfmServiceIndex}
::= { wwpLeosCfmServiceTable 1 }
WwpLeosCfmServiceEntry ::= SEQUENCE {
wwpLeosCfmServiceIndex Unsigned32,
wwpLeosCfmServiceType INTEGER,
wwpLeosCfmServiceValue INTEGER,
wwpLeosCfmServiceAdminState INTEGER,
wwpLeosCfmServiceOperState INTEGER,
wwpLeosCfmServiceAlarmTime INTEGER,
wwpLeosCfmServiceCCMInterval INTEGER,
wwpLeosCfmServiceName DisplayString,
wwpLeosCfmServiceMdLevel INTEGER,
wwpLeosCfmServiceResetTime INTEGER,
wwpLeosCfmServiceLastFaultCCM CfmDisplayString,
wwpLeosCfmServiceRMEPFailureFlag TruthValue,
wwpLeosCfmServiceCCMErrorFlag TruthValue,
wwpLeosCfmServiceCrossConnectErrorFlag TruthValue,
wwpLeosCfmServiceNumMEP Counter32,
wwpLeosCfmServiceNumRemoteMEP Counter32,
wwpLeosCfmServiceNumActiveMEP Counter32,
wwpLeosCfmServiceStatus RowStatus,
wwpLeosCfmServiceNextMepId Unsigned32,
wwpLeosCfmServiceAlarmPriority Unsigned32,
wwpLeosCfmServiceNumCCMForFault Unsigned32,
wwpLeosCfmServiceDMMInterval INTEGER,
wwpLeosCfmServiceLMMInterval INTEGER,
wwpLeosCfmServiceCCMLossStatsState INTEGER,
wwpLeosCfmServiceCCMLossBucketInterval INTEGER,
wwpLeosCfmServiceRemoteMepDiscovery INTEGER,
wwpLeosCfmServiceTlvSenderIdType INTEGER,
wwpLeosCfmServiceRMEPHoldTime Unsigned32,
wwpLeosCfmServicePortStatusFlag TruthValue,
wwpLeosCfmServiceRDIFlag TruthValue,
wwpLeosCfmServiceInstabilityFlag TruthValue,
wwpLeosCfmServiceDefaultMEPType INTEGER, --deprecated
wwpLeosCfmServiceMAID CfmMAID, --deprecated
wwpLeosCfmServiceMdIndex Unsigned32, --deprecated
wwpLeosCfmServiceMaintAssocNameType Dot1agCfmMaintAssocNameType, --deprecated
wwpLeosCfmServiceMaintAssocName Dot1agCfmMaintAssocName, --deprecated
wwpLeosCfmServiceCfmMAID CfmMAID,
wwpLeosCfmServiceCfmMdIndex Unsigned32,
wwpLeosCfmServiceCfmMaintAssocNameType Dot1agCfmMaintAssocNameType,
wwpLeosCfmServiceCfmMaintAssocName Dot1agCfmMaintAssocName,
wwpLeosCfmServiceCfmDefaultMEPType INTEGER,
wwpLeosCfmServiceY1731 TruthValue,
wwpLeosCfmServiceAccelerated TruthValue,
wwpLeosCfmServiceCCMTxState INTEGER,
wwpLeosCfmServiceRMEPAging TruthValue,
wwpLeosCfmServiceMulticastDa TruthValue,
wwpLeosCfmServiceChargedAgainstGlobalFrameBudget TruthValue,
wwpLeosCfmServiceCfmControlModuleFrameBudget Counter32
}
wwpLeosCfmServiceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique identifier for CFM service entry."
::= { wwpLeosCfmServiceEntry 1 }
wwpLeosCfmServiceType OBJECT-TYPE
SYNTAX INTEGER {
mplsVs(1),
ethVs(2),
vlan(3),
pbtTunnel(4),
vs(5),
other(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the service type.
Interpretation of wwpLeosCfmServiceValue depends on the value of this MIB object.
This MIB object along with wwpLeosCfmServiceValue must be unique for each entry in this table"
::= { wwpLeosCfmServiceEntry 2 }
wwpLeosCfmServiceValue OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the service value.
Interpretation of this object depends on the value of wwpLeosCfmServiceType.
This MIB object along with wwpLeosCfmServiceType must be unique for each entry in this table"
::= { wwpLeosCfmServiceEntry 3 }
wwpLeosCfmServiceAdminState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the admin state of CFM for this service type."
DEFVAL {enabled}
::= { wwpLeosCfmServiceEntry 4 }
wwpLeosCfmServiceOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of CFM for this service type."
::= { wwpLeosCfmServiceEntry 5 }
wwpLeosCfmServiceAlarmTime OBJECT-TYPE
SYNTAX INTEGER (1..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object allows to set the time interval that a service fault detected
by wwpLeosCfmServiceType must be present prior to triggering a fault alarm."
--UNITS {msec}
::= { wwpLeosCfmServiceEntry 6 }
wwpLeosCfmServiceCCMInterval OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object allows to set the CCM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially
with the index value. Setting the interval to 0 disables CCM transmission from all MEPs in the MA."
::= { wwpLeosCfmServiceEntry 7 }
wwpLeosCfmServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This MIB object allows to set the CFM service name."
::= { wwpLeosCfmServiceEntry 9 }
wwpLeosCfmServiceMdLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This MIB object sets the CFM service level which associates it with a Maintenance Domain."
::= { wwpLeosCfmServiceEntry 10 }
wwpLeosCfmServiceResetTime OBJECT-TYPE
SYNTAX INTEGER (10..36000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object set the time interval during which no service faults can be detected
before the service will reset a fault alarm."
::= { wwpLeosCfmServiceEntry 11 }
wwpLeosCfmServiceLastFaultCCM OBJECT-TYPE
SYNTAX CfmDisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows last received CCM fault."
::= { wwpLeosCfmServiceEntry 12 }
wwpLeosCfmServiceRMEPFailureFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the RMEP failure flag."
::= { wwpLeosCfmServiceEntry 13 }
wwpLeosCfmServiceCCMErrorFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the CCM Error flag."
::= { wwpLeosCfmServiceEntry 14 }
wwpLeosCfmServiceCrossConnectErrorFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the cross-connect Error flag."
::= { wwpLeosCfmServiceEntry 15 }
wwpLeosCfmServiceNumMEP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows Number of MEPs."
::= { wwpLeosCfmServiceEntry 16 }
wwpLeosCfmServiceNumRemoteMEP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the Number of Remote MEPs."
::= { wwpLeosCfmServiceEntry 17 }
wwpLeosCfmServiceNumActiveMEP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the Number of active MEPs."
::= { wwpLeosCfmServiceEntry 18 }
wwpLeosCfmServiceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this object to 'destroy'."
::= { wwpLeosCfmServiceEntry 19 }
wwpLeosCfmServiceNextMepId OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mib object specifies the next MEP Id for given service."
::= { wwpLeosCfmServiceEntry 20 }
wwpLeosCfmServiceAlarmPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mib object specifies the alarm priority for given service."
DEFVAL {3}
::= { wwpLeosCfmServiceEntry 21 }
wwpLeosCfmServiceNumCCMForFault OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of CCM frames that must go undelivered
for the service to be declared as operationally down."
DEFVAL {3}
::= { wwpLeosCfmServiceEntry 22 }
wwpLeosCfmServiceDMMInterval OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object allows to set the DMM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially
with the index value."
::= { wwpLeosCfmServiceEntry 23 }
wwpLeosCfmServiceLMMInterval OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object allows to set the LMM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially
with the index value."
::= { wwpLeosCfmServiceEntry 24 }
wwpLeosCfmServiceCCMLossStatsState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the operational state of CCM loss accounting
for RMEPs learned by this service type."
DEFVAL {enabled}
::= { wwpLeosCfmServiceEntry 25 }
wwpLeosCfmServiceCCMLossBucketInterval OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interval in minutes that each of the 96
CCM loss history buckets spans. The default is 15 minutes, which
means the default history covers 24 hours."
::= { wwpLeosCfmServiceEntry 26 }
wwpLeosCfmServiceRemoteMepDiscovery OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether remote meps should be discovered automatically.
if this object is set to enable it will cause remote meps to be discovered
automatically and if set to disable will not discover rempote meps."
::= { wwpLeosCfmServiceEntry 27 }
wwpLeosCfmServiceY1731 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if y1731 is enabled for the service."
::= { wwpLeosCfmServiceEntry 28 }
wwpLeosCfmServiceAccelerated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies if the service is supported in hardware ."
::= { wwpLeosCfmServiceEntry 49 }
wwpLeosCfmServiceTlvSenderIdType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
chassis(2),
manage(3),
chassisManage(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mib object specifies the Sender Id Tlv Type."
DEFVAL {chassis}
::= { wwpLeosCfmServiceEntry 50 }
wwpLeosCfmServiceRMEPHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (0..3600000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mib object specifies the Remote MEP hold time in milliseconds."
DEFVAL {2500}
::= { wwpLeosCfmServiceEntry 51 }
wwpLeosCfmServiceCCMTxState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mib object specifies the admin state of the CCM Tx."
DEFVAL {enabled}
::= { wwpLeosCfmServiceEntry 52 }
wwpLeosCfmServicePortStatusFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object shows the Port Status defect flag."
::= { wwpLeosCfmServiceEntry 53 }
wwpLeosCfmServiceRDIFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object shows the RDI defect flag."
::= { wwpLeosCfmServiceEntry 54 }
wwpLeosCfmServiceInstabilityFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object shows the Instability defect flag."
::= { wwpLeosCfmServiceEntry 55 }
wwpLeosCfmServiceRMEPAging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls automatic Remote MEP aging for the service."
::= { wwpLeosCfmServiceEntry 56 }
--deprecated
wwpLeosCfmServiceDefaultMEPType OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is used to specify the type of all MEP's created for
the service. Services of type PBT must specify a MEP type of 'down'."
::= { wwpLeosCfmServiceEntry 57 }
--deprecated
wwpLeosCfmServiceMAID OBJECT-TYPE
SYNTAX CfmMAID
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The MAID send by CCM's associated with the service."
::= { wwpLeosCfmServiceEntry 58 }
--deprecated
wwpLeosCfmServiceMdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The unique index in the Maint Domain table."
::= { wwpLeosCfmServiceEntry 59 }
--deprecated
wwpLeosCfmServiceMaintAssocNameType OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocNameType
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The type (and thereby format) of the Maintenance Association Name."
REFERENCE
"802.1ag clauses 21.6.5.4"
::= { wwpLeosCfmServiceEntry 60 }
--deprecated
wwpLeosCfmServiceMaintAssocName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object."
REFERENCE
"802.1ag clauses 21.6.5.6, and Table 21-20"
::= { wwpLeosCfmServiceEntry 61 }
-- OIDs 62,63,64 deprecated in 5305 donot use these OIDs
wwpLeosCfmServiceMulticastDa OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if multicast DA mode is enabled for the service."
::= { wwpLeosCfmServiceEntry 65 }
-- OIDs 66,67,68,69 deprecated in 5305 donot use these OIDs
wwpLeosCfmServiceChargedAgainstGlobalFrameBudget OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reflects if this service is charged against
the global frame budget."
::= { wwpLeosCfmServiceEntry 71 }
wwpLeosCfmServiceCfmDefaultMEPType OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the type of all MEP's created for
the service. Services of type PBT must specify a MEP type of 'down'."
::= { wwpLeosCfmServiceEntry 72 }
wwpLeosCfmServiceCfmMAID OBJECT-TYPE
SYNTAX CfmMAID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAID send by CCM's associated with the service."
::= { wwpLeosCfmServiceEntry 73 }
wwpLeosCfmServiceCfmMdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The unique index in the Maint Domain table."
::= { wwpLeosCfmServiceEntry 74 }
wwpLeosCfmServiceCfmMaintAssocNameType OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocNameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Association Name."
REFERENCE
"802.1ag clauses 21.6.5.4"
::= { wwpLeosCfmServiceEntry 75 }
wwpLeosCfmServiceCfmMaintAssocName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object."
REFERENCE
"802.1ag clauses 21.6.5.6, and Table 21-20"
::= { wwpLeosCfmServiceEntry 76 }
wwpLeosCfmServiceCfmControlModuleFrameBudget OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cfm Frame budget for control module for the given service."
::= { wwpLeosCfmServiceEntry 77 }
--
-- CFM Service Frame Budget Table
--
wwpLeosCfmServiceFrameBudgetTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmServiceFrameBudgetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the config
parameters for the CFM service frame budget table."
::= { wwpLeosCfmServiceFrameBudget 1 }
wwpLeosCfmServiceFrameBudgetEntry OBJECT-TYPE
SYNTAX WwpLeosCfmServiceFrameBudgetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmServiceFrameBudgetTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmSlotIndex}
::= { wwpLeosCfmServiceFrameBudgetTable 1 }
WwpLeosCfmServiceFrameBudgetEntry ::= SEQUENCE {
wwpLeosCfmSlotIndex INTEGER,
wwpLeosCfmServiceFrameBudgetSlot Counter32
}
wwpLeosCfmSlotIndex OBJECT-TYPE
SYNTAX INTEGER(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the slot number."
::= { wwpLeosCfmServiceFrameBudgetEntry 1 }
wwpLeosCfmServiceFrameBudgetSlot OBJECT-TYPE
SYNTAX Counter32
UNITS "frames/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the CFM frame budget for the slot for the given service."
::= { wwpLeosCfmServiceFrameBudgetEntry 2 }
--
-- CFM MIP Table
--
wwpLeosCfmMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM MIP Table.
This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel.
Any Get/Set/Walk will return error."
::= { wwpLeosCfmMIP 1 }
wwpLeosCfmMipEntry OBJECT-TYPE
SYNTAX WwpLeosCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMipTable."
INDEX {wwpLeosCfmMipVid, wwpLeosCfmMipPort}
::= { wwpLeosCfmMipTable 1 }
WwpLeosCfmMipEntry ::= SEQUENCE {
wwpLeosCfmMipVid INTEGER,
wwpLeosCfmMipPort INTEGER,
wwpLeosCfmMipLevel INTEGER,
wwpLeosCfmMipStatus RowStatus
}
wwpLeosCfmMipVid OBJECT-TYPE
SYNTAX INTEGER (0..24576)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the
VLAN service type for which intermediate maintenance points can be created."
::= { wwpLeosCfmMipEntry 1 }
wwpLeosCfmMipPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the
port."
::= { wwpLeosCfmMipEntry 2 }
wwpLeosCfmMipLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the level attribute."
::= { wwpLeosCfmMipEntry 3 }
wwpLeosCfmMipStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'destroy'."
::= { wwpLeosCfmMipEntry 4 }
--
-- Link Trace Message table
--
wwpLeosCfmLinkTraceMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmLinkTraceMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the LinkTraceMsg.
Not applicable to 6.x"
::= { wwpLeosCfmLinkTrace 1 }
wwpLeosCfmLinkTraceMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmLinkTraceMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmLinkTraceMsgPortId}
::= { wwpLeosCfmLinkTraceMsgTable 1 }
WwpLeosCfmLinkTraceMsgEntry ::= SEQUENCE {
wwpLeosCfmLinkTraceMsgPortId INTEGER,
wwpLeosCfmLinkTraceMsgTargetMEPID INTEGER,
wwpLeosCfmLinkTraceMsgTargetMacAddr MacAddress,
wwpLeosCfmLinkTraceMsgTTL INTEGER,
wwpLeosCfmLinkTraceMsgSequenceNumber Integer32,
wwpLeosCfmLinkTraceMsgRowStatus RowStatus,
wwpLeosCfmLinkTraceMsgPriority INTEGER,
wwpLeosCfmLinkTraceMsgServiceName DisplayString,
wwpLeosCfmLinkTraceMsgSubPortName DisplayString,
wwpLeosCfmLinkTraceMsgVsIndex Unsigned32,
wwpLeosCfmLinkTraceMsgTotalTxLtm Unsigned32,
wwpLeosCfmLinkTraceMsgTotalRxLtr Unsigned32
}
wwpLeosCfmLinkTraceMsgPortId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the port."
::= { wwpLeosCfmLinkTraceMsgEntry 1 }
wwpLeosCfmLinkTraceMsgTargetMEPID OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the target MEPID.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmLinkTraceMsgEntry 2 }
wwpLeosCfmLinkTraceMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the target MacAddress to be used when sending link LinkMsg.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosCfmLinkTraceMsgEntry 3 }
wwpLeosCfmLinkTraceMsgTTL OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the TTL to be used when sending link LinkTraceMsg."
::= { wwpLeosCfmLinkTraceMsgEntry 4 }
wwpLeosCfmLinkTraceMsgSequenceNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the sequence number in the linkTraceMsg."
::= { wwpLeosCfmLinkTraceMsgEntry 5 }
wwpLeosCfmLinkTraceMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'."
::= { wwpLeosCfmLinkTraceMsgEntry 6 }
wwpLeosCfmLinkTraceMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the priority to be used
when sending LinkTraceMsg. "
DEFVAL {7}
::= { wwpLeosCfmLinkTraceMsgEntry 7 }
wwpLeosCfmLinkTraceMsgServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the service to be used when
sending LinkTraceMsg."
::= { wwpLeosCfmLinkTraceMsgEntry 50 }
wwpLeosCfmLinkTraceMsgSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the sub-port name where the LinkTraceMsg
was sent."
::= { wwpLeosCfmLinkTraceMsgEntry 52 }
wwpLeosCfmLinkTraceMsgVsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the virtual switch where the LinkTraceMsg was sent."
::= { wwpLeosCfmLinkTraceMsgEntry 53 }
wwpLeosCfmLinkTraceMsgTotalTxLtm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total LinkTraceMsg were sent."
::= { wwpLeosCfmLinkTraceMsgEntry 54 }
wwpLeosCfmLinkTraceMsgTotalRxLtr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total LinkTraceMsg were received
from the LinkTraceResponse."
::= { wwpLeosCfmLinkTraceMsgEntry 55 }
--
-- Link Trace Message Reply table
--
wwpLeosCfmLinkTraceMsgReplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmLinkTraceMsgReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the LinkTrace Msg Reply."
::= { wwpLeosCfmLinkTrace 2 }
wwpLeosCfmLinkTraceMsgReplyEntry OBJECT-TYPE
SYNTAX WwpLeosCfmLinkTraceMsgReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgReplyTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmLinkTraceMsgPortId, wwpLeosCfmLinkTraceMsgReplyTTL, wwpLeosCfmLinkTraceMsgReplyTTLIndex}
::= { wwpLeosCfmLinkTraceMsgReplyTable 1 }
WwpLeosCfmLinkTraceMsgReplyEntry ::= SEQUENCE {
wwpLeosCfmLinkTraceMsgReplyTTL Integer32,
wwpLeosCfmLinkTraceMsgReplyTTLIndex Unsigned32,
wwpLeosCfmLinkTraceMsgReplySequenceNumber Integer32,
wwpLeosCfmLinkTraceMsgReplyMPMacAddr MacAddress,
wwpLeosCfmLinkTraceMsgReplyMEPID Integer32,
wwpLeosCfmLinkTraceMsgReplyTargetMacAddr MacAddress,
wwpLeosCfmLinkTraceMsgReplyRelayAction INTEGER,
wwpLeosCfmLinkTraceMsgReplyIngressPort INTEGER,
wwpLeosCfmLinkTraceMsgReplyIngressAction INTEGER,
wwpLeosCfmLinkTraceMsgReplyEgressPort INTEGER,
wwpLeosCfmLinkTraceMsgReplyEgressAction INTEGER,
wwpLeosCfmLinkTraceMsgReplyIngressPortStr DisplayString,
wwpLeosCfmLinkTraceMsgReplyEgressPortStr DisplayString,
wwpLeosCfmLinkTraceMsgReplyIngressMacAddr MacAddress,
wwpLeosCfmLinkTraceMsgReplyEgressMacAddr MacAddress
}
wwpLeosCfmLinkTraceMsgReplyTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the ttl of the received LinkTrace msg reply."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 1 }
wwpLeosCfmLinkTraceMsgReplyTTLIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..24576)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides an additional index when multiple LinkTrace messages are received with the same TTL."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 2 }
wwpLeosCfmLinkTraceMsgReplySequenceNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the sequence number of the received LinkTrace msg reply."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 3 }
wwpLeosCfmLinkTraceMsgReplyMPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the mac address of the MP of received LinkTrace msg reply."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 4 }
wwpLeosCfmLinkTraceMsgReplyMEPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the MEP ID of the received LinkTrace msg reply."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 5 }
wwpLeosCfmLinkTraceMsgReplyTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Target Mac address of the received LinkTrace msg reply."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 6 }
wwpLeosCfmLinkTraceMsgReplyRelayAction OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
unknown(2),
fdb(3),
mpdb(4),
noLearn(5),
hit(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply relay action."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 7 }
wwpLeosCfmLinkTraceMsgReplyIngressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is used to specify the message reply ingress port."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 8 }
wwpLeosCfmLinkTraceMsgReplyIngressAction OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
blocked(2),
vid(3),
down(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply ingress action."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 9 }
wwpLeosCfmLinkTraceMsgReplyEgressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is used to specify the message reply egress port."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 10 }
wwpLeosCfmLinkTraceMsgReplyEgressAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ttl(2),
down(3),
blocked(4),
vid(5),
ok(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply egress action."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 11 }
wwpLeosCfmLinkTraceMsgReplyIngressPortStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used to specify the message reply ingress port."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 12 }
wwpLeosCfmLinkTraceMsgReplyEgressPortStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used to specify the message reply egress port."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 13 }
wwpLeosCfmLinkTraceMsgReplyIngressMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply ingress mac address."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 50 }
wwpLeosCfmLinkTraceMsgReplyEgressMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply egress mac address."
::= { wwpLeosCfmLinkTraceMsgReplyEntry 51 }
--
-- Loopback Msg table
--
wwpLeosCfmLoopbackMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the LoopbackMsg."
::= { wwpLeosCfmLoopback 1 }
wwpLeosCfmLoopbackMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmLoopbackMsgTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmLoopbackMsgPortId}
::= { wwpLeosCfmLoopbackMsgTable 1 }
WwpLeosCfmLoopbackMsgEntry ::= SEQUENCE {
wwpLeosCfmLoopbackMsgPortId INTEGER,
wwpLeosCfmLoopbackMsgTargetMEPID Unsigned32,
wwpLeosCfmLoopbackMsgTargetMacAddr MacAddress,
wwpLeosCfmLoopbackMsgCount INTEGER,
wwpLeosCfmLoopbackMsgData DisplayString,
wwpLeosCfmLoopbackMsgPriority INTEGER,
wwpLeosCfmLoopbackMsgDefaultInterval INTEGER,
wwpLeosCfmLoopbackMsgDefaultTimeout INTEGER,
wwpLeosCfmLoopbackMsgRowStatus RowStatus
}
wwpLeosCfmLoopbackMsgPortId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the port."
::= { wwpLeosCfmLoopbackMsgEntry 1 }
wwpLeosCfmLoopbackMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmLoopbackMsgEntry 2 }
wwpLeosCfmLoopbackMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmLoopbackMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosCfmLoopbackMsgEntry 3 }
wwpLeosCfmLoopbackMsgCount OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
"
::= { wwpLeosCfmLoopbackMsgEntry 4 }
wwpLeosCfmLoopbackMsgData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
"
::= { wwpLeosCfmLoopbackMsgEntry 5 }
wwpLeosCfmLoopbackMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
"
::= { wwpLeosCfmLoopbackMsgEntry 6 }
wwpLeosCfmLoopbackMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'."
::= { wwpLeosCfmLoopbackMsgEntry 7 }
wwpLeosCfmLoopbackMsgDefaultInterval OBJECT-TYPE
SYNTAX INTEGER (10..60000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The global default LoopbackMsg interval to be used when sending link LoopbackMsg
"
::= { wwpLeosCfmLoopbackMsgEntry 8 }
wwpLeosCfmLoopbackMsgDefaultTimeout OBJECT-TYPE
SYNTAX INTEGER (2000..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The global default LoopbackMsg timeout to be used when sending link LoopbackMsg
"
::= { wwpLeosCfmLoopbackMsgEntry 9 }
--
-- CFM Maintainence Domain Table
--
wwpLeosCfmMaintenanceDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmMaintenanceDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM Maintenance Domain Table."
::= { wwpLeosCfmMaintenance 1 }
wwpLeosCfmMaintenanceDomainEntry OBJECT-TYPE
SYNTAX WwpLeosCfmMaintenanceDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMaintenanceDomainTable."
INDEX {wwpLeosCfmMaintenanceDomainIndex }
::= { wwpLeosCfmMaintenanceDomainTable 1 }
WwpLeosCfmMaintenanceDomainEntry ::= SEQUENCE {
wwpLeosCfmMaintenanceDomainIndex Unsigned32,
wwpLeosCfmMaintenanceDomainLevel INTEGER,
wwpLeosCfmMaintenanceDomainName DisplayString,
wwpLeosCfmMaintenanceDomainServiceCount Unsigned32,
wwpLeosCfmMaintenanceDomainMdFormat Dot1agCfmMaintDomainNameType,
wwpLeosCfmMaintenanceDomainMdName Dot1agCfmMaintDomainName,
wwpLeosCfmMaintenanceDomainStatus RowStatus
}
wwpLeosCfmMaintenanceDomainIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specfies the unique index in the table."
::= { wwpLeosCfmMaintenanceDomainEntry 1 }
wwpLeosCfmMaintenanceDomainLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specfies the domain level."
::= { wwpLeosCfmMaintenanceDomainEntry 2 }
wwpLeosCfmMaintenanceDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain name which can be modified."
::= { wwpLeosCfmMaintenanceDomainEntry 3 }
wwpLeosCfmMaintenanceDomainServiceCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specfies number of cfm services mapped to this domain."
::= { wwpLeosCfmMaintenanceDomainEntry 4 }
wwpLeosCfmMaintenanceDomainMdFormat OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainNameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Domain Name."
REFERENCE
"802.1ag clause 21.6.5.1"
DEFVAL { charString }
::= { wwpLeosCfmMaintenanceDomainEntry 5 }
wwpLeosCfmMaintenanceDomainMdName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maintenance Domain name. The type/format of this object
is determined by the value of the wwpLeosCfmMaintenanceDomainMdFormat object."
REFERENCE
"802.1ag clauses 3.24, 12.14.5, and 21.6.5.3"
::= { wwpLeosCfmMaintenanceDomainEntry 6 }
wwpLeosCfmMaintenanceDomainStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, a manager must set this object to 'createAndGo'
and specify, at a minimum, the wwpLeosCfmMaintenanceDomainLevel and
wwpLeosCfmMaintenanceDomainName objects.
During a create/set operation, if a non-default MdFormat is required, both the
wwpLeosCfmMaintenanceDomainMdFormat and wwpLeosCfmMaintenanceDomainMdName objects
must also be specified.
To delete a row in this table, set this object to 'destroy'."
::= { wwpLeosCfmMaintenanceDomainEntry 7 }
--
-- CFM MEP Table
--
wwpLeosCfmMEPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM MEP table."
::= { wwpLeosCfmMEP 1 }
wwpLeosCfmMEPEntry OBJECT-TYPE
SYNTAX WwpLeosCfmMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMEPTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmMEPPort}
::= { wwpLeosCfmMEPTable 1 }
WwpLeosCfmMEPEntry ::= SEQUENCE {
wwpLeosCfmMEPPort INTEGER,
wwpLeosCfmMEPAdminState INTEGER,
wwpLeosCfmMEPOperState INTEGER,
wwpLeosCfmMEPDirection INTEGER,
wwpLeosCfmMEPCCMState INTEGER,
wwpLeosCfmMEPCCMPriority INTEGER,
wwpLeosCfmMEPLTMPriority INTEGER,
wwpLeosCfmMEPId Unsigned32,
wwpLeosCfmMEPMacAddr MacAddress,
wwpLeosCfmMEPNextLbmSeqNumber Counter32,
wwpLeosCfmMEPRxValidInOrderLoopbackReply Counter32,
wwpLeosCfmMEPRxValidOutOrderLoopbackReply Counter32,
wwpLeosCfmMEPNextLTMSeqNumber Counter32,
wwpLeosCfmMEPNumLoopbackRepliesTxmt Counter32,
wwpLeosCfmMEPNumLTMReceived Counter32,
wwpLeosCfmMEPNumLTMTxmt Counter32,
wwpLeosCfmMEPNumCCMTxmt Counter32,
wwpLeosCfmMEPRowStatus RowStatus,
wwpLeosCfmMEPNumDMMSent Counter32,
wwpLeosCfmMEPDMMDelay Counter32,
wwpLeosCfmMEPDMMJitter Counter32,
wwpLeosCfmMEPNumLMMSent Counter32,
wwpLeosCfmMEPLMMFrameLossNear Counter32,
wwpLeosCfmMEPLMMFrameLossFar Counter32,
wwpLeosCfmMEPNumLMRReceived Counter32,
wwpLeosCfmMEPNumDMRReceived Counter32,
wwpLeosCfmMEPDMMMinDelay Counter32,
wwpLeosCfmMEPDMMMaxDelay Counter32,
wwpLeosCfmMEPDMMMinJitter Counter32,
wwpLeosCfmMEPDMMMaxJitter Counter32,
wwpLeosCfmMEPServiceName DisplayString,
wwpLeosCfmMEPSubPortName DisplayString,
wwpLeosCfmMEPVsPbtName DisplayString,
wwpLeosCfmMEPLogicalPortName DisplayString,
wwpLeosCfmMEPSubPortIndex Unsigned32,
wwpLeosCfmMEPEncapsulation INTEGER,
wwpLeosCfmMEPLeadPortBayIndex Unsigned32,
wwpLeosCfmMEPLeadPortShelfIndex Unsigned32,
wwpLeosCfmMEPLeadPortModuleIndex Unsigned32,
wwpLeosCfmMEPPBTBvid Unsigned32,
wwpLeosCfmMEPPBTEtype Unsigned32,
wwpLeosCfmMEPNumLbmTxmt Counter32,
wwpLeosCfmMEPNumLbmReceived Counter32,
wwpLeosCfmMEPNumLoopbackRepliesReceived Counter32,
wwpLeosCfmMEPNumLTRepliesTxmt Counter32,
wwpLeosCfmMEPNumLTRepliesReceived Counter32,
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived Counter32,
wwpLeosCfmMEPNumCCMReceived Counter32
}
wwpLeosCfmMEPPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the port id."
::= { wwpLeosCfmMEPEntry 1 }
wwpLeosCfmMEPAdminState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the admin state of CFM MEP."
::= { wwpLeosCfmMEPEntry 2 }
wwpLeosCfmMEPOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is obsolete and should not be used."
::= { wwpLeosCfmMEPEntry 3 }
wwpLeosCfmMEPDirection OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type vlan."
::= { wwpLeosCfmMEPEntry 4 }
wwpLeosCfmMEPCCMState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType."
::= { wwpLeosCfmMEPEntry 5 }
wwpLeosCfmMEPCCMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specified the priority of CCM messages transmitted."
::= { wwpLeosCfmMEPEntry 6 }
wwpLeosCfmMEPLTMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object specifies the priority received on the given service and port."
::= { wwpLeosCfmMEPEntry 7 }
wwpLeosCfmMEPId OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the mep id for the given service and port."
::= { wwpLeosCfmMEPEntry 8 }
wwpLeosCfmMEPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the mac address received on the given service and port.."
::= { wwpLeosCfmMEPEntry 9 }
wwpLeosCfmMEPNextLbmSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the next lbm sequence number received on the given service and port."
::= { wwpLeosCfmMEPEntry 10 }
wwpLeosCfmMEPRxValidInOrderLoopbackReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total valid in order loopback replies received on the given service and port."
::= { wwpLeosCfmMEPEntry 11 }
wwpLeosCfmMEPRxValidOutOrderLoopbackReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total valid out of order loopback replies received on the given service and port."
::= { wwpLeosCfmMEPEntry 12 }
wwpLeosCfmMEPNextLTMSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the next LTM serquence number received on the given service and port."
::= { wwpLeosCfmMEPEntry 13 }
wwpLeosCfmMEPNumLoopbackRepliesTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the flags total loopback replies transmitted on the given service and port."
::= { wwpLeosCfmMEPEntry 14 }
wwpLeosCfmMEPNumLTMReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total LTM messages received on the given service and port."
::= { wwpLeosCfmMEPEntry 15 }
wwpLeosCfmMEPNumLTMTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LTM transmitted on the given service and port."
::= { wwpLeosCfmMEPEntry 16 }
wwpLeosCfmMEPNumCCMTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total CCM messages transmitted on the given service and port."
::= { wwpLeosCfmMEPEntry 17 }
wwpLeosCfmMEPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'."
::= { wwpLeosCfmMEPEntry 18 }
wwpLeosCfmMEPNumDMMSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total delay measurement messages
transmitted on the given service and port."
::= { wwpLeosCfmMEPEntry 19 }
wwpLeosCfmMEPDMMDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average delay in microseconds
measured during the last DMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 20 }
wwpLeosCfmMEPDMMJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average jitter in microseconds
measured during the last DMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 21 }
wwpLeosCfmMEPNumLMMSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total frame loss measurement messages transmitted
during the last test performed on the given service and port."
::= { wwpLeosCfmMEPEntry 22 }
wwpLeosCfmMEPLMMFrameLossNear OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of lost frames on the near side
measured during the last LMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 23 }
wwpLeosCfmMEPLMMFrameLossFar OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of lost frames on the far side
measured during the last LMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 24 }
wwpLeosCfmMEPNumLMRReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of frame loss measurement
replies received during the last test performed on the given service
and port. If this count is zero, the near and far frame loss counts
are probably invalid as connectivity to the device being tested was
not available."
::= { wwpLeosCfmMEPEntry 25 }
wwpLeosCfmMEPNumDMRReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of delay measurement
replies received during the last test performed on the given service
and port. If this count is not equal to the number of delay
measurement frames sent, the jitter and delay are probably invalid
as connectivity to the device being tested was not stable."
::= { wwpLeosCfmMEPEntry 26 }
wwpLeosCfmMEPDMMMinDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum delay in microseconds measured during
the last DMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 27 }
wwpLeosCfmMEPDMMMaxDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum delay in microseconds measured during
the last DMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 28 }
wwpLeosCfmMEPDMMMinJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum jitter in microseconds measured during
the last DMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 29 }
wwpLeosCfmMEPDMMMaxJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum jitter in microseconds measured during
the last DMM performance test on the given service and port."
::= { wwpLeosCfmMEPEntry 30 }
wwpLeosCfmMEPServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the service name assigned to this port."
::= { wwpLeosCfmMEPEntry 50 }
wwpLeosCfmMEPSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the sub-port name assigned to the given service and port."
::= { wwpLeosCfmMEPEntry 51 }
wwpLeosCfmMEPVsPbtName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the virtual switch or Pbt tunnel assigned to the given service and port."
::= { wwpLeosCfmMEPEntry 52 }
wwpLeosCfmMEPLogicalPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the logical port name assigned to the given service and port."
::= { wwpLeosCfmMEPEntry 53 }
wwpLeosCfmMEPSubPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port index."
::= { wwpLeosCfmMEPEntry 54 }
wwpLeosCfmMEPEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
ieee802dot1d(1),
pbtCfmEncap(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the encapsulation applied to the service and port."
::= { wwpLeosCfmMEPEntry 55 }
wwpLeosCfmMEPLeadPortBayIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent bay that MEP is in."
::= { wwpLeosCfmMEPEntry 56 }
wwpLeosCfmMEPLeadPortShelfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent shelf that MEP is in."
::= { wwpLeosCfmMEPEntry 57 }
wwpLeosCfmMEPLeadPortModuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table."
::= { wwpLeosCfmMEPEntry 58 }
wwpLeosCfmMEPPBTBvid OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the BVID assigned to the given service and port."
::= { wwpLeosCfmMEPEntry 59 }
wwpLeosCfmMEPPBTEtype OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the E-type assigned to the given service and port."
::= { wwpLeosCfmMEPEntry 60 }
wwpLeosCfmMEPNumLbmTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total loopback messages transmitted on the
given service and port."
::= { wwpLeosCfmMEPEntry 61 }
wwpLeosCfmMEPNumLbmReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total loopback messages received on the
given service and port."
::= { wwpLeosCfmMEPEntry 62 }
wwpLeosCfmMEPNumLoopbackRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total loopback replies received on the
given service and port."
::= { wwpLeosCfmMEPEntry 63 }
wwpLeosCfmMEPNumLTRepliesTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total link trace replies transmitted on the
given service and port."
::= { wwpLeosCfmMEPEntry 64 }
wwpLeosCfmMEPNumLTRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total link trace replies received on the
given service and port."
::= { wwpLeosCfmMEPEntry 65 }
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total unexpected link trace replies received on the
given service and port."
::= { wwpLeosCfmMEPEntry 66 }
wwpLeosCfmMEPNumCCMReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total CCM messages received on the given service and port."
::= { wwpLeosCfmMEPEntry 67 }
--
-- CFM Remote MEP Table
--
wwpLeosCfmRemoteMEPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmRemoteMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the Remote MEP table."
::= { wwpLeosCfmRemoteMEP 1 }
wwpLeosCfmRemoteMEPEntry OBJECT-TYPE
SYNTAX WwpLeosCfmRemoteMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmRemoteMEPTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmRemoteMEPID}
::= { wwpLeosCfmRemoteMEPTable 1 }
WwpLeosCfmRemoteMEPEntry ::= SEQUENCE {
wwpLeosCfmRemoteMEPID Unsigned32,
wwpLeosCfmRemoteMEPAdminState INTEGER,
wwpLeosCfmRemoteMEPOperState INTEGER,
wwpLeosCfmRemoteMEPTime TimeTicks,
wwpLeosCfmRemoteMEPMacAddr MacAddress,
wwpLeosCfmRemoteMEPKLastMacStatus TruthValue,
wwpLeosCfmRemoteMEPFailureFlag TruthValue,
wwpLeosCfmRemoteMEPCCMErrorFlag TruthValue,
wwpLeosCfmRemoteMEPRDIErrorFlag TruthValue,
wwpLeosCfmRemoteMEPNumCCMRx Counter32,
wwpLeosCfmRemoteMEPNumDMMSent Counter32,
wwpLeosCfmRemoteMEPDelay Counter32,
wwpLeosCfmRemoteMEPJitter Counter32,
wwpLeosCfmRemoteMEPNumLMMSent Counter32,
wwpLeosCfmRemoteMEPFrameLossNear Counter32,
wwpLeosCfmRemoteMEPFrameLossFar Counter32,
wwpLeosCfmRemoteMEPNumLMRReceived Counter32,
wwpLeosCfmRemoteMEPNumCCMLost Counter32,
wwpLeosCfmRemoteMEPNumDMRReceived Counter32,
wwpLeosCfmRemoteMEPHoldState INTEGER, --deprecated
wwpLeosCfmRemoteMEPCCMComment DisplayString,
wwpLeosCfmRemoteMEPBadSequence Counter32,
wwpLeosCfmRemoteMEPMinDelay Counter32,
wwpLeosCfmRemoteMEPMaxDelay Counter32,
wwpLeosCfmRemoteMEPMinJitter Counter32,
wwpLeosCfmRemoteMEPMaxJitter Counter32,
wwpLeosCfmRemoteMEPSubPortName DisplayString,
wwpLeosCfmRemoteMEPServiceName DisplayString,
wwpLeosCfmRemoteMEPBayIndex Unsigned32,
wwpLeosCfmRemoteMEPShelfIndex Unsigned32,
wwpLeosCfmRemoteMEPModuleIndex Unsigned32,
wwpLeosCfmRemoteMEPPreviousBayIndex Unsigned32,
wwpLeosCfmRemoteMEPPreviousShelfIndex Unsigned32,
wwpLeosCfmRemoteMEPPreviousModuleIndex Unsigned32,
wwpLeosCfmRemoteMEPLastPortStatus INTEGER,
wwpLeosCfmRemoteMEPLastInterfaceStatus INTEGER,
wwpLeosCfmRemoteMEPLastSeqNum Unsigned32,
wwpLeosCfmRemoteMEPCCMSeqErrors Unsigned32,
wwpLeosCfmRemoteMEPCCMLevel INTEGER,
wwpLeosCfmRemoteCfmMEPHoldState INTEGER,
wwpLeosCfmRemoteMEPServiceClear TruthValue,
wwpLeosCfmRemoteMEPServiceStatisticsClear TruthValue,
wwpLeosCfmRemoteMEPAccelerated TruthValue,
wwpLeosCfmRemoteMEPRowStatus RowStatus
}
wwpLeosCfmRemoteMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the MEPID."
::= { wwpLeosCfmRemoteMEPEntry 1 }
wwpLeosCfmRemoteMEPAdminState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state of the Remote MEP State Machine."
::= { wwpLeosCfmRemoteMEPEntry 2 }
wwpLeosCfmRemoteMEPOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2),
hold(3),
holdLocked(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the Remote MEP State Machine.
disabled represents that remote mep is admin disabled.
enabled represents that remote mep is operationally enabled
hold represents that remote mep is admin enabled but currently in operational hold state
holdLocked represents that remote mep is locked in hold state."
::= { wwpLeosCfmRemoteMEPEntry 3 }
wwpLeosCfmRemoteMEPTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the time at which the Remote MEP State Machine last
entered RMEP_FAILED or RMEP_OK states."
::= { wwpLeosCfmRemoteMEPEntry 4 }
wwpLeosCfmRemoteMEPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MAC address of the remote MEP."
::= { wwpLeosCfmRemoteMEPEntry 5 }
wwpLeosCfmRemoteMEPKLastMacStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the last MAC status received."
::= { wwpLeosCfmRemoteMEPEntry 6 }
wwpLeosCfmRemoteMEPFailureFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Remote MEP failure flag."
::= { wwpLeosCfmRemoteMEPEntry 7 }
wwpLeosCfmRemoteMEPCCMErrorFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the MEP CCM error flag."
::= { wwpLeosCfmRemoteMEPEntry 8 }
wwpLeosCfmRemoteMEPRDIErrorFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the MEP RDI error flag."
::= { wwpLeosCfmRemoteMEPEntry 9 }
wwpLeosCfmRemoteMEPNumCCMRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the number of MEP CCM frames received."
::= { wwpLeosCfmRemoteMEPEntry 10 }
wwpLeosCfmRemoteMEPNumDMMSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DMM frames sent."
::= { wwpLeosCfmRemoteMEPEntry 11 }
wwpLeosCfmRemoteMEPDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the average Delay in microseconds
during the last Delay Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 12 }
wwpLeosCfmRemoteMEPJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the average Jitter in microseconds
during the last Delay Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 13 }
wwpLeosCfmRemoteMEPNumLMMSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the number of LMM frames sent."
::= { wwpLeosCfmRemoteMEPEntry 14 }
wwpLeosCfmRemoteMEPFrameLossNear OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the near side Frame Loss
during the last Frame Loss Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 15 }
wwpLeosCfmRemoteMEPFrameLossFar OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the far side Frame Loss
during the last Frame Loss Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 16 }
wwpLeosCfmRemoteMEPNumLMRReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the number of LMR frames received."
::= { wwpLeosCfmRemoteMEPEntry 17 }
wwpLeosCfmRemoteMEPNumCCMLost OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the number of MEP CCM frames lost,
as calculated by watching for CCM sequence errors."
::= { wwpLeosCfmRemoteMEPEntry 18 }
wwpLeosCfmRemoteMEPNumDMRReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the number of DMR frames received."
::= { wwpLeosCfmRemoteMEPEntry 19 }
--deprecated
wwpLeosCfmRemoteMEPHoldState OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2),
locked(3)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is used to set the remote MEP Hold State"
::= { wwpLeosCfmRemoteMEPEntry 20 }
wwpLeosCfmRemoteMEPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create entries in remote mep table"
::= { wwpLeosCfmRemoteMEPEntry 21 }
wwpLeosCfmRemoteMEPCCMComment OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object contains the CCM Comment, if available,
that was sent by the remote Ciena device."
::= { wwpLeosCfmRemoteMEPEntry 22 }
wwpLeosCfmRemoteMEPBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object contains the number of LMR frames received
with bad sequence number, for a given service and remote mep."
::= { wwpLeosCfmRemoteMEPEntry 23 }
wwpLeosCfmRemoteMEPMinDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum Delay in microseconds
during the last Delay Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 24 }
wwpLeosCfmRemoteMEPMaxDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum Delay in microseconds
during the last Delay Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 25 }
wwpLeosCfmRemoteMEPMinJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum jitter in microseconds
during the last Delay Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 26 }
wwpLeosCfmRemoteMEPMaxJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum jitter in microseconds
during the last Delay Measurement test."
::= { wwpLeosCfmRemoteMEPEntry 27 }
wwpLeosCfmRemoteCfmMEPHoldState OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2),
lock(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hold-state for the remote-mep entry."
::= { wwpLeosCfmRemoteMEPEntry 28 }
wwpLeosCfmRemoteMEPServiceClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this object to true causes the remote MEP for this service
to be re-initialized ."
::= { wwpLeosCfmRemoteMEPEntry 29 }
wwpLeosCfmRemoteMEPServiceStatisticsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this object to true resets the statistics for the remote MEP
for this service."
::= { wwpLeosCfmRemoteMEPEntry 30 }
wwpLeosCfmRemoteMEPAccelerated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies if the remote-mep is monitored in the hardware."
::= { wwpLeosCfmRemoteMEPEntry 49 }
wwpLeosCfmRemoteMEPSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the unique index for the module."
::= { wwpLeosCfmRemoteMEPEntry 50 }
wwpLeosCfmRemoteMEPServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Service name."
::= { wwpLeosCfmRemoteMEPEntry 51 }
wwpLeosCfmRemoteMEPBayIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent bay that MEP is in."
::= { wwpLeosCfmRemoteMEPEntry 52 }
wwpLeosCfmRemoteMEPShelfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent shelf that MEP is in."
::= { wwpLeosCfmRemoteMEPEntry 53 }
wwpLeosCfmRemoteMEPModuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table."
::= { wwpLeosCfmRemoteMEPEntry 54 }
wwpLeosCfmRemoteMEPPreviousBayIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent bay that MEP was previously in."
::= { wwpLeosCfmRemoteMEPEntry 55 }
wwpLeosCfmRemoteMEPPreviousShelfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent shelf that MEP was previously in."
::= { wwpLeosCfmRemoteMEPEntry 56 }
wwpLeosCfmRemoteMEPPreviousModuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent module that MEP was previously in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table."
::= { wwpLeosCfmRemoteMEPEntry 57 }
wwpLeosCfmRemoteMEPLastPortStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
none(2),
blocked(3),
up(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the remote MEP last port status."
::= { wwpLeosCfmRemoteMEPEntry 58 }
wwpLeosCfmRemoteMEPLastInterfaceStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
up(2),
down(3),
testing(4),
dormant(5),
lowerLayerDown(6),
notPresent(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the remote MEP interface status."
::= { wwpLeosCfmRemoteMEPEntry 59 }
wwpLeosCfmRemoteMEPLastSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the tbd."
::= { wwpLeosCfmRemoteMEPEntry 60 }
wwpLeosCfmRemoteMEPCCMSeqErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the number of MEP CCM frames sequence errors."
::= { wwpLeosCfmRemoteMEPEntry 61 }
wwpLeosCfmRemoteMEPCCMLevel OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the CCM level."
::= { wwpLeosCfmRemoteMEPEntry 62 }
--OID 63 is deprecated in 5305 MIB, OID 64 is removed in the 5305 MIB
wwpLeosCfmRemoteMEPDeleteAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true will delete all remote meps.
This object will always return false."
::= { wwpLeosCfmRemoteMEP 65 }
--
-- CFM Port Stack Table
--
wwpLeosCfmPortStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmPortStackEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing the display
parameters for the CFM port stack table."
::= { wwpLeosCfmStack 1 }
wwpLeosCfmPortStackEntry OBJECT-TYPE
SYNTAX WwpLeosCfmPortStackEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmPortStackTable."
INDEX {wwpLeosCfmPortStackPort, wwpLeosCfmPortStackVid, wwpLeosCfmPortStackType, wwpLeosCfmPortStackLevel}
::= { wwpLeosCfmPortStackTable 1 }
WwpLeosCfmPortStackEntry ::= SEQUENCE {
wwpLeosCfmPortStackPort INTEGER,
wwpLeosCfmPortStackVid INTEGER,
wwpLeosCfmPortStackType INTEGER,
wwpLeosCfmPortStackLevel Unsigned32,
wwpLeosCfmPortStackMEPId INTEGER
}
wwpLeosCfmPortStackPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is used as index in the table and is used to specify the port id."
::= { wwpLeosCfmPortStackEntry 1 }
wwpLeosCfmPortStackVid OBJECT-TYPE
SYNTAX INTEGER (1..24576)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is used as index in the table and is used to show the VLAN."
::= { wwpLeosCfmPortStackEntry 2 }
wwpLeosCfmPortStackType OBJECT-TYPE
SYNTAX INTEGER {
mepUp(1),
mepDown(2),
mip(3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is used as index in the table and is used to show the type of Maintenance Point."
::= { wwpLeosCfmPortStackEntry 3 }
wwpLeosCfmPortStackLevel OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is used as index in the table and is used to show the level of stack."
::= { wwpLeosCfmPortStackEntry 4 }
wwpLeosCfmPortStackMEPId OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The MEP ID."
::= { wwpLeosCfmPortStackEntry 5 }
--
-- CFM Port Stack Table
--
wwpLeosCfmExtPortStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtPortStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the CFM port stack table."
::= { wwpLeosCfmExtStack 1 }
wwpLeosCfmExtPortStackEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtPortStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmPortStackTable."
INDEX {wwpLeosCfmExtPortStackVid, wwpLeosCfmExtPortStackPort, wwpLeosCfmExtPortStackType, wwpLeosCfmExtPortStackLevel}
::= { wwpLeosCfmExtPortStackTable 1 }
WwpLeosCfmExtPortStackEntry ::= SEQUENCE {
wwpLeosCfmExtPortStackVid INTEGER,
wwpLeosCfmExtPortStackPort INTEGER,
wwpLeosCfmExtPortStackType INTEGER,
wwpLeosCfmExtPortStackLevel Unsigned32,
wwpLeosCfmExtPortStackMEPId INTEGER
}
wwpLeosCfmExtPortStackVid OBJECT-TYPE
SYNTAX INTEGER (1..24576)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to show the VLAN."
::= { wwpLeosCfmExtPortStackEntry 1 }
wwpLeosCfmExtPortStackPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the port id."
::= { wwpLeosCfmExtPortStackEntry 2 }
wwpLeosCfmExtPortStackType OBJECT-TYPE
SYNTAX INTEGER {
mepUp(1),
mepDown(2),
mip(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to show the type of Maintenance Point."
::= { wwpLeosCfmExtPortStackEntry 3 }
wwpLeosCfmExtPortStackLevel OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to show the level of stack."
::= { wwpLeosCfmExtPortStackEntry 4 }
wwpLeosCfmExtPortStackMEPId OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEP ID."
::= { wwpLeosCfmExtPortStackEntry 5 }
--
-- CFM Mip CCM Db Table
--
wwpLeosCfmMipCCMDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmMipCCMDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the MIP CCM Db table."
::= { wwpLeosCfmMipCCMDb 1 }
wwpLeosCfmMipCCMDbEntry OBJECT-TYPE
SYNTAX WwpLeosCfmMipCCMDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable."
INDEX { wwpLeosCfmMipCCMDbIndex }
::= { wwpLeosCfmMipCCMDbTable 1 }
WwpLeosCfmMipCCMDbEntry ::= SEQUENCE {
wwpLeosCfmMipCCMDbIndex Unsigned32,
wwpLeosCfmMipCCMDbVid Unsigned32,
wwpLeosCfmMipCCMDbMacAddr MacAddress,
wwpLeosCfmMaintenanceDomainIndex Unsigned32,
wwpLeosCfmMipCCMDbPort INTEGER,
wwpLeosCfmMipCCMDbMEPID INTEGER,
wwpLeosCfmMipCCMdbNumCCMRx Counter32,
wwpLeosCfmMipCCMDbTime TimeTicks,
wwpLeosCfmMipCCMDbLastMacStatus TruthValue,
wwpLeosCfmMipCCMDbRDIErrorFlag TruthValue
}
wwpLeosCfmMipCCMDbIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..24576)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB vlan."
::= { wwpLeosCfmMipCCMDbEntry 1 }
wwpLeosCfmMipCCMDbVid OBJECT-TYPE
SYNTAX Unsigned32 (1..24576)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB vlan."
::= { wwpLeosCfmMipCCMDbEntry 2 }
wwpLeosCfmMipCCMDbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the mac address."
::= { wwpLeosCfmMipCCMDbEntry 3 }
wwpLeosCfmMipCCMDbPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB port."
::= { wwpLeosCfmMipCCMDbEntry 4 }
wwpLeosCfmMipCCMDbMEPID OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB MEP ID."
::= { wwpLeosCfmMipCCMDbEntry 5 }
wwpLeosCfmMipCCMdbNumCCMRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of CCM DB packets received."
::= { wwpLeosCfmMipCCMDbEntry 6 }
wwpLeosCfmMipCCMDbTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB time."
::= { wwpLeosCfmMipCCMDbEntry 7 }
wwpLeosCfmMipCCMDbLastMacStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB last mac status."
::= { wwpLeosCfmMipCCMDbEntry 8 }
wwpLeosCfmMipCCMDbRDIErrorFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the CCM DB RDI error flag status."
::= { wwpLeosCfmMipCCMDbEntry 9 }
--
-- CFM Faults
--
wwpLeosCfmServiceFaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmServiceFaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table used for Fault Traps.
The last CFM error that occurred is reported."
::= { wwpLeosCfmService 2 }
wwpLeosCfmServiceFaultEntry OBJECT-TYPE
SYNTAX WwpLeosCfmServiceFaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmServiceFaultTable."
INDEX { wwpLeosCfmServiceIndex }
::= { wwpLeosCfmServiceFaultTable 1 }
WwpLeosCfmServiceFaultEntry ::= SEQUENCE {
wwpLeosCfmServiceFaultTime TimeTicks,
wwpLeosCfmServiceFaultType INTEGER,
wwpLeosCfmServiceFaultDesc DisplayString,
wwpLeosCfmServiceFaultMep INTEGER,
wwpLeosCfmServiceVlan INTEGER,
wwpLeosCfmServiceVsPbtName DisplayString
}
wwpLeosCfmServiceFaultTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Time at which the fault occurred."
::= { wwpLeosCfmServiceFaultEntry 1 }
wwpLeosCfmServiceFaultType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
someRDIDefect(2),
someMACStatusDefect(3),
someRMEPCCMDefect(4),
errorCCMDefect(5),
xconCCMDefect(6),
instability(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the type of fault."
::= { wwpLeosCfmServiceFaultEntry 2 }
wwpLeosCfmServiceFaultDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the description of the fault."
::= { wwpLeosCfmServiceFaultEntry 3 }
wwpLeosCfmServiceFaultMep OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Mepid of MEP reporting the fault."
::= { wwpLeosCfmServiceFaultEntry 4 }
wwpLeosCfmServiceVlan OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the service VLAN."
::= { wwpLeosCfmServiceFaultEntry 5 }
wwpLeosCfmServiceVsPbtName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the virtual switch or Pbt tunnel assigned to the given service."
::= { wwpLeosCfmServiceFaultEntry 50 }
--
-- CFM SERVICE STATISTICS TABLE
--
wwpLeosCfmServiceStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmServiceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM Service Table.
To create an entry in this table, the following criteria must be met:
wwpLeosCfmServiceType must be specified.
wwpLeosCfmServiceValue must be specified.
wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo.
"
::= { wwpLeosCfmService 3 }
wwpLeosCfmServiceStatisticsEntry OBJECT-TYPE
SYNTAX WwpLeosCfmServiceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmServiceTable."
INDEX {wwpLeosCfmServiceIndex}
::= { wwpLeosCfmServiceStatisticsTable 1 }
WwpLeosCfmServiceStatisticsEntry ::= SEQUENCE {
wwpLeosCfmServiceRxTotalValidFrames Counter64,
wwpLeosCfmServiceRxTotalInvalidFrames Counter64,
wwpLeosCfmServiceInvalidMessageOverflow Counter64,
wwpLeosCfmServiceInvalidPortStatusTLV Counter64,
wwpLeosCfmServiceInvalidInterfaceStatusTLV Counter64,
wwpLeosCfmServiceInvalidSenderIDTLV Counter64,
wwpLeosCfmServiceTxTotalCCM Counter64,
wwpLeosCfmServiceTotalRxValidCCM Counter64,
wwpLeosCfmServiceTotalRxInSequenceCCM Counter64,
wwpLeosCfmServiceTotalRxNotInSequenceCCM Counter64,
wwpLeosCfmServiceTotalRxMDLevelXconCCM Counter64,
wwpLeosCfmServiceTotalRxMAIDXconCCM Counter64,
wwpLeosCfmServiceTotalRxMEPIDErrorCCM Counter64,
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM Counter64,
wwpLeosCfmServiceTotalRxInvalidCCM Counter64,
wwpLeosCfmServiceTotalTxLTM Counter64,
wwpLeosCfmServiceTotalTxLTR Counter64,
wwpLeosCfmServiceTotalRxValidLTR Counter64,
wwpLeosCfmServiceTotalRxUnexpectedLTR Counter64,
wwpLeosCfmServiceTotalRxInvalidLTR Counter64,
wwpLeosCfmServiceTotalRxInvalidRelayActionLTR Counter64,
wwpLeosCfmServiceTotalRxValidLTM Counter64,
wwpLeosCfmServiceTotalTxInvalidLTM Counter64,
wwpLeosCfmServiceTotalTxLBM Counter64,
wwpLeosCfmServiceTotalTxLBR Counter64,
wwpLeosCfmServiceTotalRxInorderLBR Counter64,
wwpLeosCfmServiceTotalRxOutOfOrderLBR Counter64,
wwpLeosCfmServiceTotalRxContentMismatchLBR Counter64,
wwpLeosCfmServiceTotalRxUnexpectedLBR Counter64,
wwpLeosCfmServiceTotalRxInvalidLBR Counter64,
wwpLeosCfmServiceTotalRxValidLBM Counter64,
wwpLeosCfmServiceTotalRxInvalidLBM Counter64,
wwpLeosCfmServiceTotalTxDMM Counter64,
wwpLeosCfmServiceTotalTxDMR Counter64,
wwpLeosCfmServiceTotalRxDMM Counter64,
wwpLeosCfmServiceTotalRxDMR Counter64,
wwpLeosCfmServiceTotalTxLMM Counter64,
wwpLeosCfmServiceTotalTxLMR Counter64,
wwpLeosCfmServiceTotalRxLMM Counter64,
wwpLeosCfmServiceTotalRxLMR Counter64,
wwpLeosCfmServiceStatsClear INTEGER
}
wwpLeosCfmServiceRxTotalValidFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total valid Frames received."
::= { wwpLeosCfmServiceStatisticsEntry 1 }
wwpLeosCfmServiceRxTotalInvalidFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total invalid Frames received."
::= { wwpLeosCfmServiceStatisticsEntry 2 }
wwpLeosCfmServiceInvalidMessageOverflow OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total invalid message overflow Frames."
::= { wwpLeosCfmServiceStatisticsEntry 3 }
wwpLeosCfmServiceInvalidPortStatusTLV OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total invalid Port Status TLVs Frames."
::= { wwpLeosCfmServiceStatisticsEntry 4 }
wwpLeosCfmServiceInvalidInterfaceStatusTLV OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The invalid interface Status TLVs Frames."
::= { wwpLeosCfmServiceStatisticsEntry 5 }
wwpLeosCfmServiceInvalidSenderIDTLV OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The invalid SenderId TLV."
::= { wwpLeosCfmServiceStatisticsEntry 6 }
wwpLeosCfmServiceTxTotalCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total CCM sent."
::= { wwpLeosCfmServiceStatisticsEntry 7 }
wwpLeosCfmServiceTotalRxValidCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total valid CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 8 }
wwpLeosCfmServiceTotalRxInSequenceCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total CCM in sequence received."
::= { wwpLeosCfmServiceStatisticsEntry 9 }
wwpLeosCfmServiceTotalRxNotInSequenceCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total CCM not in sequence received."
::= { wwpLeosCfmServiceStatisticsEntry 10 }
wwpLeosCfmServiceTotalRxMDLevelXconCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total MD Level Xcon CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 11 }
wwpLeosCfmServiceTotalRxMAIDXconCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total MAID Xcon CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 12 }
wwpLeosCfmServiceTotalRxMEPIDErrorCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total MEPID Error CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 13 }
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total Interval Error CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 14 }
wwpLeosCfmServiceTotalRxInvalidCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total Internal Error CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 15 }
wwpLeosCfmServiceTotalTxLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total Internal Error CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 16 }
wwpLeosCfmServiceTotalTxLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total Internal Error CCM received."
::= { wwpLeosCfmServiceStatisticsEntry 17 }
wwpLeosCfmServiceTotalRxValidLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The valid LTR Received."
::= { wwpLeosCfmServiceStatisticsEntry 18 }
wwpLeosCfmServiceTotalRxUnexpectedLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unexpected LTR received. "
::= { wwpLeosCfmServiceStatisticsEntry 19 }
wwpLeosCfmServiceTotalRxInvalidLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies invalid LTR received. "
::= { wwpLeosCfmServiceStatisticsEntry 20 }
wwpLeosCfmServiceTotalRxInvalidRelayActionLTR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total invalid relay action LTR received."
::= { wwpLeosCfmServiceStatisticsEntry 21 }
wwpLeosCfmServiceTotalRxValidLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The valid LTM received."
::= { wwpLeosCfmServiceStatisticsEntry 22 }
wwpLeosCfmServiceTotalTxInvalidLTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total invalid LTM sent."
::= { wwpLeosCfmServiceStatisticsEntry 23 }
wwpLeosCfmServiceTotalTxLBM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LBM sent."
::= { wwpLeosCfmServiceStatisticsEntry 24 }
wwpLeosCfmServiceTotalTxLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LBR sent."
::= { wwpLeosCfmServiceStatisticsEntry 25 }
wwpLeosCfmServiceTotalRxInorderLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total in order LBR received."
::= { wwpLeosCfmServiceStatisticsEntry 26 }
wwpLeosCfmServiceTotalRxOutOfOrderLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The toal out of order LBR received."
::= { wwpLeosCfmServiceStatisticsEntry 27 }
wwpLeosCfmServiceTotalRxContentMismatchLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total content mismatch LBR received."
::= { wwpLeosCfmServiceStatisticsEntry 28 }
wwpLeosCfmServiceTotalRxUnexpectedLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total unexpected LBR received."
::= { wwpLeosCfmServiceStatisticsEntry 29 }
wwpLeosCfmServiceTotalRxInvalidLBR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The invalid LBR received."
::= { wwpLeosCfmServiceStatisticsEntry 30 }
wwpLeosCfmServiceTotalRxValidLBM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The valid LBM received."
::= { wwpLeosCfmServiceStatisticsEntry 31 }
wwpLeosCfmServiceTotalRxInvalidLBM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total invalid LBM received."
::= { wwpLeosCfmServiceStatisticsEntry 32 }
wwpLeosCfmServiceTotalTxDMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total DMM sent. "
::= { wwpLeosCfmServiceStatisticsEntry 33 }
wwpLeosCfmServiceTotalTxDMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total DMR sent."
::= { wwpLeosCfmServiceStatisticsEntry 34 }
wwpLeosCfmServiceTotalRxDMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total DMM received."
::= { wwpLeosCfmServiceStatisticsEntry 35 }
wwpLeosCfmServiceTotalRxDMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total DMR received."
::= { wwpLeosCfmServiceStatisticsEntry 36 }
wwpLeosCfmServiceTotalTxLMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LMM sent."
::= { wwpLeosCfmServiceStatisticsEntry 37 }
wwpLeosCfmServiceTotalTxLMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LMR sent."
::= { wwpLeosCfmServiceStatisticsEntry 38 }
wwpLeosCfmServiceTotalRxLMM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LMM received."
::= { wwpLeosCfmServiceStatisticsEntry 39 }
wwpLeosCfmServiceTotalRxLMR OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total LMR received. "
::= { wwpLeosCfmServiceStatisticsEntry 40 }
wwpLeosCfmServiceStatsClear OBJECT-TYPE
SYNTAX INTEGER
{
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear will clear statististics for the given service index.
This object can't be set to none"
::= { wwpLeosCfmServiceStatisticsEntry 41 }
wwpLeosCfmServiceClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to clear(1) will clear all service level statistics for all services
in addition within each mep."
DEFVAL {none}
::= {wwpLeosCfmService 4}
--
-- Delay Measurement Msg table
--
wwpLeosCfmDelayMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmDelayMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the DelayMeasurementMsg."
::= { wwpLeosCfmDelay 1 }
wwpLeosCfmDelayMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmDelayMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmDelayMsgTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmDelayMsgPortId}
::= { wwpLeosCfmDelayMsgTable 1 }
WwpLeosCfmDelayMsgEntry ::= SEQUENCE {
wwpLeosCfmDelayMsgPortId INTEGER,
wwpLeosCfmDelayMsgTargetMEPID Unsigned32,
wwpLeosCfmDelayMsgTargetMacAddr MacAddress,
wwpLeosCfmDelayMsgCount INTEGER,
wwpLeosCfmDelayMsgPriority INTEGER,
wwpLeosCfmDelayMsgRowStatus RowStatus,
wwpLeosCfmDelayMsgRepeat INTEGER,
wwpLeosCfmDelayMsgRepeatCount INTEGER,
wwpLeosCfmDelayMsgDelayThreshold INTEGER,
wwpLeosCfmDelayMsgJitterThreshold INTEGER,
wwpLeosCfmDelayMsgMaxDelayThreshold INTEGER,
wwpLeosCfmDelayMsgMaxJitterThreshold INTEGER
}
wwpLeosCfmDelayMsgPortId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the port."
::= { wwpLeosCfmDelayMsgEntry 1 }
wwpLeosCfmDelayMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmDelayMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmDelayMsgEntry 2 }
wwpLeosCfmDelayMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmDelayMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosCfmDelayMsgEntry 3 }
wwpLeosCfmDelayMsgCount OBJECT-TYPE
SYNTAX INTEGER (2..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg."
::= { wwpLeosCfmDelayMsgEntry 4 }
wwpLeosCfmDelayMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg."
::= { wwpLeosCfmDelayMsgEntry 5 }
wwpLeosCfmDelayMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must set this object to
'createAndGo'. To delete a row in this table, set this to 'destroy'.
If 'destroy' is used and either TargetMacAddr or TargetMEPID is
specified, a cancel will be done for any repeating test on those items."
::= { wwpLeosCfmDelayMsgEntry 6 }
wwpLeosCfmDelayMsgRepeat OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to make the Delay Measurement test a repeating test."
::= { wwpLeosCfmDelayMsgEntry 7 }
wwpLeosCfmDelayMsgRepeatCount OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The repeat time in minutes for the Delay Measurement test.
If zero is specified, the test runs continuously."
::= { wwpLeosCfmDelayMsgEntry 8 }
wwpLeosCfmDelayMsgDelayThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Delay Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the average delay result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmDelayMsgEntry 9 }
wwpLeosCfmDelayMsgJitterThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Jitter Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the average jitter result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmDelayMsgEntry 10 }
wwpLeosCfmDelayMsgMaxDelayThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Delay Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the maximum delay result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmDelayMsgEntry 11 }
wwpLeosCfmDelayMsgMaxJitterThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Jitter Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the maximum jitter result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmDelayMsgEntry 12 }
--
-- Frame Loss Measurement Msg table
--
wwpLeosCfmFrameLossMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmFrameLossMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the FrameLossMeasurementMsg."
::= { wwpLeosCfmFrameLoss 1 }
wwpLeosCfmFrameLossMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmFrameLossMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmFrameLossMsgPortId}
::= { wwpLeosCfmFrameLossMsgTable 1 }
WwpLeosCfmFrameLossMsgEntry ::= SEQUENCE {
wwpLeosCfmFrameLossMsgPortId INTEGER,
wwpLeosCfmFrameLossMsgTargetMEPID Unsigned32,
wwpLeosCfmFrameLossMsgTargetMacAddr MacAddress,
wwpLeosCfmFrameLossMsgCount INTEGER,
wwpLeosCfmFrameLossMsgPriority INTEGER,
wwpLeosCfmFrameLossMsgRowStatus RowStatus,
wwpLeosCfmFrameLossMsgRepeat INTEGER,
wwpLeosCfmFrameLossMsgRepeatCount INTEGER,
wwpLeosCfmFrameLossMsgFlnThreshold INTEGER,
wwpLeosCfmFrameLossMsgFlfThreshold INTEGER
}
wwpLeosCfmFrameLossMsgPortId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the port."
::= { wwpLeosCfmFrameLossMsgEntry 1 }
wwpLeosCfmFrameLossMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmFrameLossMsgEntry 2 }
wwpLeosCfmFrameLossMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmFrameLossMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosCfmFrameLossMsgEntry 3 }
wwpLeosCfmFrameLossMsgCount OBJECT-TYPE
SYNTAX INTEGER (2..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg."
::= { wwpLeosCfmFrameLossMsgEntry 4 }
wwpLeosCfmFrameLossMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg."
::= { wwpLeosCfmFrameLossMsgEntry 5 }
wwpLeosCfmFrameLossMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must set this object to
'createAndGo'. To delete a row in this table, set this to 'destroy'.
If 'destroy' is used and either TargetMacAddr or TargetMEPID is
specified, a cancel will be done for any repeating test on those items."
::= { wwpLeosCfmFrameLossMsgEntry 6 }
wwpLeosCfmFrameLossMsgRepeat OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to make the Frame Loss Measurement test a repeating test."
::= { wwpLeosCfmFrameLossMsgEntry 7 }
wwpLeosCfmFrameLossMsgRepeatCount OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The repeat time in minutes for the Frame Loss Measurement test.
If zero is specified, the test runs continuously."
::= { wwpLeosCfmFrameLossMsgEntry 8 }
wwpLeosCfmFrameLossMsgFlnThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss near result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmFrameLossMsgEntry 9 }
wwpLeosCfmFrameLossMsgFlfThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmFrameLossMsgEntry 10 }
--
-- CFM Remote MEP CCM Loss Table
--
wwpLeosCfmRemoteMEPCCMLossTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmRemoteMEPCCMLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the Remote MEP CCM Loss table."
::= { wwpLeosCfmRemoteMEPCCMLoss 1 }
wwpLeosCfmRemoteMEPCCMLossEntry OBJECT-TYPE
SYNTAX WwpLeosCfmRemoteMEPCCMLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmRemoteMEPCCMLossTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmRemoteMEPID, wwpLeosCfmRemoteMEPCCMLossNum}
::= { wwpLeosCfmRemoteMEPCCMLossTable 1 }
WwpLeosCfmRemoteMEPCCMLossEntry ::= SEQUENCE {
wwpLeosCfmRemoteMEPCCMLossNum Unsigned32,
wwpLeosCfmRemoteMEPCCMLossCount Gauge32
}
wwpLeosCfmRemoteMEPCCMLossNum OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used as an index into the table and is used to specify
the CCM Loss bucket to be returned."
::= { wwpLeosCfmRemoteMEPCCMLossEntry 1 }
wwpLeosCfmRemoteMEPCCMLossCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of CCM's lost during the
wwpLeosCfmServiceCCMLossBucketInterval sample period."
::= { wwpLeosCfmRemoteMEPCCMLossEntry 2 }
--
-- Loopback Msg table
--
wwpLeosCfmExtLoopbackMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration parameters for the LoopbackMsg.
The following attributes are required to create a LoopbackMsg:
-- wwpLeosCfmServiceIndex
-- wwpLeosCfmExtLoopbackMsgTargetMEPID or
-- wwpLeosCfmExtLoopbackMsgTargetMacAddr
-- wwpLeosCfmExtLoopbackMsgCount
-- wwpLeosCfmExtLoopbackMsgData
-- wwpLeosCfmExtLoopbackMsgPriority
-- wwpLeosCfmExtLoopbackMsgAction
-- wwpLeosCfmExtLoopbackMsgInterval
-- wwpLeosCfmExtLoopbackMsgTimeout
-- wwpLeosCfmExtLoopbackMsgLoss"
::= { wwpLeosCfmExtLoopback 1 }
wwpLeosCfmExtLoopbackMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmExtLoopbackMsgTable."
--wwpLeosCfmExtLoopbackMsgLocalMEPID is the new index in place of portId
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtLoopbackMsgLocalMEPID}
::= { wwpLeosCfmExtLoopbackMsgTable 1 }
WwpLeosCfmExtLoopbackMsgEntry ::= SEQUENCE {
wwpLeosCfmExtLoopbackMsgLocalMEPID Unsigned32,
wwpLeosCfmExtLoopbackMsgTargetMEPID Unsigned32,
wwpLeosCfmExtLoopbackMsgTargetMacAddr MacAddress,
wwpLeosCfmExtLoopbackMsgCount INTEGER,
wwpLeosCfmExtLoopbackMsgData DisplayString,
wwpLeosCfmExtLoopbackMsgPriority INTEGER,
wwpLeosCfmExtLoopbackMsgAction SendState,
wwpLeosCfmExtLoopbackMsgInterval INTEGER,
wwpLeosCfmExtLoopbackMsgTimeout INTEGER,
wwpLeosCfmExtLoopbackMsgLoss INTEGER
}
wwpLeosCfmExtLoopbackMsgLocalMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the port."
::= { wwpLeosCfmExtLoopbackMsgEntry 1 }
wwpLeosCfmExtLoopbackMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMacAddr
is not specified else error will be returned."
::= { wwpLeosCfmExtLoopbackMsgEntry 2 }
wwpLeosCfmExtLoopbackMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending
link LoopbackMsg. This object should only be set if
wwpLeosCfmExtLoopbackMsgTargetMEPID is not specified else error will
be returned."
::= { wwpLeosCfmExtLoopbackMsgEntry 3 }
wwpLeosCfmExtLoopbackMsgCount OBJECT-TYPE
SYNTAX INTEGER (1..3000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg count to be used when
sending link LoopbackMsg. "
::= { wwpLeosCfmExtLoopbackMsgEntry 4 }
wwpLeosCfmExtLoopbackMsgData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg data to be used when
sending link LoopbackMsg. "
::= { wwpLeosCfmExtLoopbackMsgEntry 5 }
wwpLeosCfmExtLoopbackMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg priority to be used when
sending link LoopbackMsg. "
::= { wwpLeosCfmExtLoopbackMsgEntry 6 }
wwpLeosCfmExtLoopbackMsgAction OBJECT-TYPE
SYNTAX SendState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the action for the message (send, clear or cancel).
If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMacAddr is specified
then loopbackMsg is sent to remote Mac.
If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMEPID is specified
then loopbackMsg is sent to remote mepid.
If set to clear(2) will clear mep statistics for given service and mepid.
If set to cancel(3) will return commit_failed_error."
::= { wwpLeosCfmExtLoopbackMsgEntry 7}
wwpLeosCfmExtLoopbackMsgInterval OBJECT-TYPE
SYNTAX INTEGER (10..60000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg interval to be used when
sending link LoopbackMsg. "
::= { wwpLeosCfmExtLoopbackMsgEntry 8 }
wwpLeosCfmExtLoopbackMsgTimeout OBJECT-TYPE
SYNTAX INTEGER (2000..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg timeout to be used when
sending link LoopbackMsg. "
::= { wwpLeosCfmExtLoopbackMsgEntry 9 }
wwpLeosCfmExtLoopbackMsgLoss OBJECT-TYPE
SYNTAX INTEGER (1..3000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to display the LoopbackMsg loss count."
::= { wwpLeosCfmExtLoopbackMsgEntry 10 }
--
-- CFM MEP Table
--
wwpLeosCfmExtMEPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM MEP table.
To create entry in this table use SNMP multiple set operation.
- wwpLeosCfmExtPortId must be specified.
- wwpLeosCfmExtVlanId must be specified.
- wwpLeosCfmExtMEPRowStatus must be set to 'CreateAndGo'"
::= { wwpLeosCfmExtMEP 1 }
wwpLeosCfmExtMEPEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMEPTable."
-- wwpLeosCfmExtMEPId is the new index in place of mepport
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtMEPId}
::= { wwpLeosCfmExtMEPTable 1 }
WwpLeosCfmExtMEPEntry ::= SEQUENCE {
wwpLeosCfmExtMEPId Unsigned32,
wwpLeosCfmExtPortId INTEGER,
wwpLeosCfmExtVlanId INTEGER,
wwpLeosCfmExtMEPAdminState INTEGER,
wwpLeosCfmExtMEPOperState INTEGER,
wwpLeosCfmExtMEPDirection INTEGER,
wwpLeosCfmExtMEPCCMState INTEGER,
wwpLeosCfmExtMEPCCMPriority INTEGER,
wwpLeosCfmExtMEPLTMPriority INTEGER,
wwpLeosCfmExtMEPMacAddr MacAddress,
wwpLeosCfmExtMEPNextLbmSeqNumber Counter32,
wwpLeosCfmExtMEPNextLTMSeqNumber Counter32,
wwpLeosCfmExtMEPRowStatus RowStatus,
wwpLeosCfmExtMEPDMMDelay Counter32,
wwpLeosCfmExtMEPDMMJitter Counter32,
wwpLeosCfmExtMEPLMMFrameLossNear Counter32,
wwpLeosCfmExtMEPLMMFrameLossFar Counter32,
wwpLeosCfmExtMEPServiceName DisplayString,
wwpLeosCfmExtMEPInterfaceName DisplayString,
wwpLeosCfmExtMEPServiceInstanceName DisplayString,
wwpLeosCfmExtMEPLogicalPortName DisplayString,
wwpLeosCfmExtMEPTagMode INTEGER,
wwpLeosCfmExtMEPTagVID INTEGER,
wwpLeosCfmExtMEPTagPriority INTEGER,
wwpLeosCfmExtMEPLMMBadSequence Counter32,
wwpLeosCfmExtMEPCCMComment DisplayString,
wwpLeosCfmExtMEPLMMMissingSequence Counter32,
wwpLeosCfmExtMEPBlockOppositeFaultCurrent Counter32,
wwpLeosCfmExtMEPBlockOppositeFaultThreshold Unsigned32,
wwpLeosCfmExtMEPBlockOppositeFaultTime INTEGER,
wwpLeosCfmExtMEPDMMMinDelay Counter32,
wwpLeosCfmExtMEPDMMMaxDelay Counter32,
wwpLeosCfmExtMEPDMMMinJitter Counter32,
wwpLeosCfmExtMEPDMMMaxJitter Counter32,
wwpLeosCfmExtMEPAccelerated TruthValue
}
wwpLeosCfmExtMEPId OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This is used as the index in the table. This object specifies the MEP id for the given service."
::= { wwpLeosCfmExtMEPEntry 1 }
wwpLeosCfmExtPortId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { wwpLeosCfmExtMEPEntry 2 }
wwpLeosCfmExtVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { wwpLeosCfmExtMEPEntry 3 }
wwpLeosCfmExtMEPAdminState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the admin state of CFM MEP."
::= { wwpLeosCfmExtMEPEntry 4 }
wwpLeosCfmExtMEPOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the oper state of CFM MEP."
::= { wwpLeosCfmExtMEPEntry 5 }
wwpLeosCfmExtMEPDirection OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type VLAN."
::= { wwpLeosCfmExtMEPEntry 6 }
wwpLeosCfmExtMEPCCMState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType."
::= { wwpLeosCfmExtMEPEntry 7 }
wwpLeosCfmExtMEPCCMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specified the priority of CCM messages transmitted."
::= { wwpLeosCfmExtMEPEntry 8 }
wwpLeosCfmExtMEPLTMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority received on the given service and MEP."
DEFVAL {7}
::= { wwpLeosCfmExtMEPEntry 9 }
wwpLeosCfmExtMEPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address received on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 10 }
wwpLeosCfmExtMEPNextLbmSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next lbm sequence number received on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 11 }
wwpLeosCfmExtMEPNextLTMSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next LTM sequence number received on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 12 }
wwpLeosCfmExtMEPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'."
::= { wwpLeosCfmExtMEPEntry 13 }
wwpLeosCfmExtMEPDMMDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average delay in microseconds measured during
the last DMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 14 }
wwpLeosCfmExtMEPDMMJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average jitter in microseconds measured during
the last DMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 15 }
wwpLeosCfmExtMEPLMMFrameLossNear OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost frames on the near side measured during
the last LMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 16 }
wwpLeosCfmExtMEPLMMFrameLossFar OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost frames on the far side measured during
the last LMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 17 }
wwpLeosCfmExtMEPServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service name assigned to this MEP."
::= { wwpLeosCfmExtMEPEntry 50 }
wwpLeosCfmExtMEPInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface name associated with this MEP."
::= { wwpLeosCfmExtMEPEntry 51 }
wwpLeosCfmExtMEPServiceInstanceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service instance name associated
with this MEP."
::= { wwpLeosCfmExtMEPEntry 52 }
wwpLeosCfmExtMEPLogicalPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Logical port name associated with this MEP."
::= { wwpLeosCfmExtMEPEntry 53 }
wwpLeosCfmExtMEPTagMode OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tag-mode for the given mep and service. When on(1) the MEP originates all frames
with an additional inner-most tag. On a down MEP this is the CVLAN tag."
DEFVAL {off}
::= { wwpLeosCfmExtMEPEntry 54 }
wwpLeosCfmExtMEPTagVID OBJECT-TYPE
SYNTAX INTEGER ( 0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID for the additional tag given mep and service."
DEFVAL {0}
::= { wwpLeosCfmExtMEPEntry 55 }
wwpLeosCfmExtMEPTagPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority encoded in the additional tag."
DEFVAL {7}
::= { wwpLeosCfmExtMEPEntry 56 }
wwpLeosCfmExtMEPLMMBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifes the number of frames with bad sequence numbers
measured during the last LMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 57 }
wwpLeosCfmExtMEPCCMComment OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mib object allows to set the MEP CCM Comment."
::= { wwpLeosCfmExtMEPEntry 58 }
wwpLeosCfmExtMEPLMMMissingSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifes the number of frames with missing sequence numbers
measured during the last LMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 59 }
wwpLeosCfmExtMEPBlockOppositeFaultCurrent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of frames seen in the current sample window."
::= { wwpLeosCfmExtMEPEntry 60 }
wwpLeosCfmExtMEPBlockOppositeFaultThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of frames to block before generating a fault."
::= { wwpLeosCfmExtMEPEntry 61 }
wwpLeosCfmExtMEPBlockOppositeFaultTime OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The frame sample window size in minutes."
::= { wwpLeosCfmExtMEPEntry 62 }
wwpLeosCfmExtMEPDMMMinDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum delay in microseconds measured during
the last DMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 63 }
wwpLeosCfmExtMEPDMMMaxDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum delay in microseconds measured during
the last DMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 64 }
wwpLeosCfmExtMEPDMMMinJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum jitter in microseconds measured during
the last DMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 65 }
wwpLeosCfmExtMEPDMMMaxJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum jitter in microseconds measured during
the last DMM performance test on the given service and MEP."
::= { wwpLeosCfmExtMEPEntry 66 }
wwpLeosCfmExtMEPAccelerated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies if the mep is monitored in hardware."
::= { wwpLeosCfmExtMEPEntry 67 }
--
-- CFM MEP Statistics
--
wwpLeosCfmExtMEPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtMEPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM MEP table."
::= { wwpLeosCfmExtMEP 2 }
wwpLeosCfmExtMEPStatsEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtMEPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMEPTable."
-- wwpLeosCfmExtMEPId is the new index in place of mepport
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtMEPId}
::= { wwpLeosCfmExtMEPStatsTable 1 }
WwpLeosCfmExtMEPStatsEntry ::= SEQUENCE {
wwpLeosCfmExtMEPStatsTotalValidFramesReceived Counter64,
wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived Counter64,
wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived Counter64,
wwpLeosCfmExtMEPStatsCCMTxmt Counter64,
wwpLeosCfmExtMEPStatsValidCCMReceived Counter64,
wwpLeosCfmExtMEPStatsCCMInSequenceReceived Counter64,
wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived Counter64,
wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived Counter64,
wwpLeosCfmExtMEPStatsMAIDXconCCMReceived Counter64,
wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived Counter64,
wwpLeosCfmExtMEPStatsRxInvalidCCM Counter64,
wwpLeosCfmExtMEPStatsLBMTxmt Counter64,
wwpLeosCfmExtMEPStatsLBRTxmt Counter64,
wwpLeosCfmExtMEPStatsInOrderLBRReceived Counter64,
wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived Counter64,
wwpLeosCfmExtMEPStatsContentMismatchLBRReceived Counter64,
wwpLeosCfmExtMEPStatsUnexpectedLBRReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidLBRReceived Counter64,
wwpLeosCfmExtMEPStatsLTMTxmt Counter64,
wwpLeosCfmExtMEPStatsValidLTMReceived Counter64,
wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidLTRAction Counter64,
wwpLeosCfmExtMEPStatsLTRTxmt Counter64,
wwpLeosCfmExtMEPStatsLTRReceived Counter64,
wwpLeosCfmExtMEPStatsDMMTxmt Counter64,
wwpLeosCfmExtMEPStatsDMMReceived Counter64,
wwpLeosCfmExtMEPStatsDMRTxmt Counter64,
wwpLeosCfmExtMEPStatsDMRReceived Counter64,
wwpLeosCfmExtMEPStatsDMReplyTimeout Counter64,
wwpLeosCfmExtMEPStatsLMMTxmt Counter64,
wwpLeosCfmExtMEPStatsLMMReceived Counter64,
wwpLeosCfmExtMEPStatsLMRTxmt Counter64,
wwpLeosCfmExtMEPStatsLMRReceived Counter64,
wwpLeosCfmExtMEPStatsLMRTimeout Counter64,
wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived Counter64,
wwpLeosCfmExtMEPStatsClear INTEGER,
wwpLeosCfmExtMEPStatsValidLBMReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidLBMReceived Counter64,
wwpLeosCfmExtMEPStatsUnexpectedLTRReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidDMMReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidDMRReceived Counter64,
wwpLeosCfmExtMEPStatsUnexpectedDMRReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidLMMReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidLMRReceived Counter64,
wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep Counter64
}
wwpLeosCfmExtMEPStatsTotalValidFramesReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total valid frames received."
::= { wwpLeosCfmExtMEPStatsEntry 1 }
wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid frames received."
::= { wwpLeosCfmExtMEPStatsEntry 2 }
wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid message overflow frames received "
::= { wwpLeosCfmExtMEPStatsEntry 3 }
wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid port status TLVs received."
::= { wwpLeosCfmExtMEPStatsEntry 4 }
wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid interface status TLVs received."
::= { wwpLeosCfmExtMEPStatsEntry 5 }
wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid senderID frames received."
::= { wwpLeosCfmExtMEPStatsEntry 6 }
wwpLeosCfmExtMEPStatsCCMTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total CCM sent."
::= { wwpLeosCfmExtMEPStatsEntry 7 }
wwpLeosCfmExtMEPStatsValidCCMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total valid CCMs received."
::= { wwpLeosCfmExtMEPStatsEntry 8 }
wwpLeosCfmExtMEPStatsCCMInSequenceReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total CCM received in sequence."
::= { wwpLeosCfmExtMEPStatsEntry 9 }
wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total not in sequence received CCMs."
::= { wwpLeosCfmExtMEPStatsEntry 10 }
wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Xcon CCMs received."
::= { wwpLeosCfmExtMEPStatsEntry 11 }
wwpLeosCfmExtMEPStatsMAIDXconCCMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies MAID Xcon CCMs."
::= { wwpLeosCfmExtMEPStatsEntry 12 }
wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Interval Error CCM received."
::= { wwpLeosCfmExtMEPStatsEntry 13 }
wwpLeosCfmExtMEPStatsRxInvalidCCM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specified invalid CCMs received "
::= { wwpLeosCfmExtMEPStatsEntry 14 }
wwpLeosCfmExtMEPStatsLBMTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of LBM sent"
::= { wwpLeosCfmExtMEPStatsEntry 15 }
wwpLeosCfmExtMEPStatsLBRTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of LBR sent."
::= { wwpLeosCfmExtMEPStatsEntry 16 }
wwpLeosCfmExtMEPStatsInOrderLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of in order LBR received "
::= { wwpLeosCfmExtMEPStatsEntry 17 }
wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Out of order LBR received"
::= { wwpLeosCfmExtMEPStatsEntry 18 }
wwpLeosCfmExtMEPStatsContentMismatchLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of content mismatch LBR received "
::= { wwpLeosCfmExtMEPStatsEntry 19 }
wwpLeosCfmExtMEPStatsUnexpectedLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies unexpected LBR received "
::= { wwpLeosCfmExtMEPStatsEntry 20 }
wwpLeosCfmExtMEPStatsInvalidLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies invalid LBR Received."
::= { wwpLeosCfmExtMEPStatsEntry 21 }
wwpLeosCfmExtMEPStatsLTMTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of LTM sent. "
::= { wwpLeosCfmExtMEPStatsEntry 22 }
wwpLeosCfmExtMEPStatsValidLTMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total valid LTM received "
::= { wwpLeosCfmExtMEPStatsEntry 23 }
wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid LTM received. "
::= { wwpLeosCfmExtMEPStatsEntry 24 }
wwpLeosCfmExtMEPStatsInvalidLTRAction OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid LTR action. "
::= { wwpLeosCfmExtMEPStatsEntry 25 }
wwpLeosCfmExtMEPStatsLTRTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total LTR sent. "
::= { wwpLeosCfmExtMEPStatsEntry 26 }
wwpLeosCfmExtMEPStatsLTRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies unexpected LTR sent. "
::= { wwpLeosCfmExtMEPStatsEntry 27 }
wwpLeosCfmExtMEPStatsDMMTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total DMM sent. "
::= { wwpLeosCfmExtMEPStatsEntry 28 }
wwpLeosCfmExtMEPStatsDMMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total DMM received. "
::= { wwpLeosCfmExtMEPStatsEntry 29 }
wwpLeosCfmExtMEPStatsDMRTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total DMR sent."
::= { wwpLeosCfmExtMEPStatsEntry 30 }
wwpLeosCfmExtMEPStatsDMRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total DMR received"
::= { wwpLeosCfmExtMEPStatsEntry 31 }
wwpLeosCfmExtMEPStatsDMReplyTimeout OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies DMR Timeout."
::= { wwpLeosCfmExtMEPStatsEntry 32 }
wwpLeosCfmExtMEPStatsLMMTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total LMM Sent. "
::= { wwpLeosCfmExtMEPStatsEntry 33 }
wwpLeosCfmExtMEPStatsLMMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total LMM received "
::= { wwpLeosCfmExtMEPStatsEntry 34 }
wwpLeosCfmExtMEPStatsLMRTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total LMR sent."
::= { wwpLeosCfmExtMEPStatsEntry 35 }
wwpLeosCfmExtMEPStatsLMRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total LMR Received. "
::= { wwpLeosCfmExtMEPStatsEntry 36 }
wwpLeosCfmExtMEPStatsLMRTimeout OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total LMR Timeout. "
::= { wwpLeosCfmExtMEPStatsEntry 37 }
wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total MEPID Error CCM Received. "
::= { wwpLeosCfmExtMEPStatsEntry 38 }
wwpLeosCfmExtMEPStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to clear will clear MEP stats for the given service and MepId.
This object can't be set to none"
::= { wwpLeosCfmExtMEPStatsEntry 40 }
wwpLeosCfmExtMEPStatsValidLBMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Valid LBM Received. "
::= { wwpLeosCfmExtMEPStatsEntry 41 }
wwpLeosCfmExtMEPStatsInvalidLBMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid LBM Received. "
::= { wwpLeosCfmExtMEPStatsEntry 42 }
wwpLeosCfmExtMEPStatsUnexpectedLTRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total unexpected LTR Received. "
::= { wwpLeosCfmExtMEPStatsEntry 43 }
wwpLeosCfmExtMEPStatsInvalidDMMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid DMM Received. "
::= { wwpLeosCfmExtMEPStatsEntry 44 }
wwpLeosCfmExtMEPStatsInvalidDMRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid DMR Received. "
::= { wwpLeosCfmExtMEPStatsEntry 45 }
wwpLeosCfmExtMEPStatsUnexpectedDMRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total unexpected DMR Received. "
::= { wwpLeosCfmExtMEPStatsEntry 46 }
wwpLeosCfmExtMEPStatsInvalidLMMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid LMM Received. "
::= { wwpLeosCfmExtMEPStatsEntry 47 }
wwpLeosCfmExtMEPStatsInvalidLMRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid LMR Received. "
::= { wwpLeosCfmExtMEPStatsEntry 48 }
wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total invalid frames blocked by opposite MEP."
::= { wwpLeosCfmExtMEPStatsEntry 49 }
--
-- Last stats Table
--
wwpLeosCfmExtMEPLastStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtMEPLastStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM MEP table."
::= { wwpLeosCfmExtMEP 3 }
wwpLeosCfmExtMEPLastStatsEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtMEPLastStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMEPTable."
-- wwpLeosCfmExtMEPId is the new index in place of mepport
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtMEPId}
::= { wwpLeosCfmExtMEPLastStatsTable 1 }
WwpLeosCfmExtMEPLastStatsEntry ::= SEQUENCE {
wwpLeosCfmExtMEPLastStatsPriority Counter64,
wwpLeosCfmExtMEPLastStatsLBMCount Counter64,
wwpLeosCfmExtMEPLastStatsLBMSent Counter64,
wwpLeosCfmExtMEPLastStatsLBMToSend Counter64,
wwpLeosCfmExtMEPLastStatsInOrderLBRReceived Counter64,
wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived Counter64,
wwpLeosCfmExtMEPLastStatsDMMPriority Counter64,
wwpLeosCfmExtMEPLastStatsDMMTxmt Counter64,
wwpLeosCfmExtMEPLastStatsDMMReceived Counter64,
wwpLeosCfmExtMEPLastStatsDMMDelay Counter64,
wwpLeosCfmExtMEPLastStatsDMMJitter Counter64,
wwpLeosCfmExtMEPLastStatsLMMPriority Counter64,
wwpLeosCfmExtMEPLastStatsLMMTxtm Counter64,
wwpLeosCfmExtMEPLastStatsLMMReceived Counter64,
wwpLeosCfmExtMEPLastStatsFrameLossNear Counter64,
wwpLeosCfmExtMEPLastStatsFrameLossFar Counter64,
wwpLeosCfmExtMEPLastStatsLTMPriority Counter64,
wwpLeosCfmExtMEPLastStatsLTMSequenceNo Counter64,
wwpLeosCfmExtMEPLastStatsLTMInitialTTL Counter64,
wwpLeosCfmExtMEPLastStatsFrameLossBadSequence Counter64,
wwpLeosCfmExtMEPLastStatsDMMMinDelay Counter64,
wwpLeosCfmExtMEPLastStatsDMMMaxDelay Counter64,
wwpLeosCfmExtMEPLastStatsDMMMinJitter Counter64,
wwpLeosCfmExtMEPLastStatsDMMMaxJitter Counter64
}
wwpLeosCfmExtMEPLastStatsPriority OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LBM Priority"
::= {wwpLeosCfmExtMEPLastStatsEntry 1}
wwpLeosCfmExtMEPLastStatsLBMCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LBM Count"
::= {wwpLeosCfmExtMEPLastStatsEntry 2}
wwpLeosCfmExtMEPLastStatsLBMSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last number LBM sent"
::= {wwpLeosCfmExtMEPLastStatsEntry 3}
wwpLeosCfmExtMEPLastStatsLBMToSend OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LBM to send."
::= {wwpLeosCfmExtMEPLastStatsEntry 4}
wwpLeosCfmExtMEPLastStatsInOrderLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last In oder LBR received"
::= {wwpLeosCfmExtMEPLastStatsEntry 5}
wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last out of order LBR received"
::= {wwpLeosCfmExtMEPLastStatsEntry 6}
wwpLeosCfmExtMEPLastStatsDMMPriority OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Last DMM Priority"
::= {wwpLeosCfmExtMEPLastStatsEntry 7}
wwpLeosCfmExtMEPLastStatsDMMTxmt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of last DMM sent"
::= {wwpLeosCfmExtMEPLastStatsEntry 8}
wwpLeosCfmExtMEPLastStatsDMMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last DMM Received"
::= {wwpLeosCfmExtMEPLastStatsEntry 9}
wwpLeosCfmExtMEPLastStatsDMMDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Last DMM Delay."
::= {wwpLeosCfmExtMEPLastStatsEntry 10}
wwpLeosCfmExtMEPLastStatsDMMJitter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last DMM Jitter."
::= {wwpLeosCfmExtMEPLastStatsEntry 11}
wwpLeosCfmExtMEPLastStatsLMMPriority OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LMM priority"
::= {wwpLeosCfmExtMEPLastStatsEntry 12}
wwpLeosCfmExtMEPLastStatsLMMTxtm OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LMM sent."
::= {wwpLeosCfmExtMEPLastStatsEntry 13}
wwpLeosCfmExtMEPLastStatsLMMReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies number of last LMM received."
::= {wwpLeosCfmExtMEPLastStatsEntry 14}
wwpLeosCfmExtMEPLastStatsFrameLossNear OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last near Frame Losses"
::= {wwpLeosCfmExtMEPLastStatsEntry 15}
wwpLeosCfmExtMEPLastStatsFrameLossFar OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last far Frames Loss"
::= {wwpLeosCfmExtMEPLastStatsEntry 16}
wwpLeosCfmExtMEPLastStatsLTMPriority OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LTM Priority"
::= {wwpLeosCfmExtMEPLastStatsEntry 17}
wwpLeosCfmExtMEPLastStatsLTMSequenceNo OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last LTM Sequence number."
::= {wwpLeosCfmExtMEPLastStatsEntry 18}
wwpLeosCfmExtMEPLastStatsLTMInitialTTL OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last initial TTL LTM."
::= {wwpLeosCfmExtMEPLastStatsEntry 19}
wwpLeosCfmExtMEPLastStatsFrameLossBadSequence OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifes the number of frames with bad sequence numbers measured
during the last LMM performance test on the given service and Mep."
::= {wwpLeosCfmExtMEPLastStatsEntry 20}
wwpLeosCfmExtMEPLastStatsDMMMinDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Last DMM Minimum Delay."
::= {wwpLeosCfmExtMEPLastStatsEntry 21}
wwpLeosCfmExtMEPLastStatsDMMMaxDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies Last DMM Maximum Delay."
::= {wwpLeosCfmExtMEPLastStatsEntry 22}
wwpLeosCfmExtMEPLastStatsDMMMinJitter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last DMM Minimum Jitter."
::= {wwpLeosCfmExtMEPLastStatsEntry 23}
wwpLeosCfmExtMEPLastStatsDMMMaxJitter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies last DMM Maximum Jitter."
::= {wwpLeosCfmExtMEPLastStatsEntry 24}
wwpLeosCfmExtMEPClearStatistics OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to clear(1) will clear statistics for all Meps across all services"
DEFVAL {none}
::= {wwpLeosCfmExtMEP 4}
--
-- CFM MEP Delay History
--
wwpLeosCfmExtMEPDelayHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtMEPDelayHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The (conceptual) table listing the Y.1731 Delay
History table for the CFM MEP."
::= { wwpLeosCfmExtMEP 5 }
wwpLeosCfmExtMEPDelayHistoryEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtMEPDelayHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry (conceptual row) in the wwpLeosCfmMEPDelayHistoryTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtMEPId, wwpLeosCfmExtMEPDelayHistoryIndex}
::= { wwpLeosCfmExtMEPDelayHistoryTable 1 }
WwpLeosCfmExtMEPDelayHistoryEntry ::= SEQUENCE {
wwpLeosCfmExtMEPDelayHistoryIndex INTEGER,
wwpLeosCfmExtMEPDelayHistoryStatus INTEGER,
wwpLeosCfmExtMEPDelayHistoryInterval INTEGER,
wwpLeosCfmExtMEPDelayHistoryPriority INTEGER,
wwpLeosCfmExtMEPDelayHistoryMEPId Unsigned32,
wwpLeosCfmExtMEPDelayHistoryNumDMMSent Unsigned32,
wwpLeosCfmExtMEPDelayHistoryNumDMRReceived Unsigned32,
wwpLeosCfmExtMEPDelayHistoryMinDelay Unsigned32,
wwpLeosCfmExtMEPDelayHistoryAveDelay Unsigned32,
wwpLeosCfmExtMEPDelayHistoryMaxDelay Unsigned32,
wwpLeosCfmExtMEPDelayHistoryMinJitter Unsigned32,
wwpLeosCfmExtMEPDelayHistoryAveJitter Unsigned32,
wwpLeosCfmExtMEPDelayHistoryMaxJitter Unsigned32,
wwpLeosCfmExtMEPDelayHistoryStartTime Unsigned32,
wwpLeosCfmExtMEPDelayHistoryStopTime Unsigned32,
wwpLeosCfmExtMEPDelayHistoryClear INTEGER
}
wwpLeosCfmExtMEPDelayHistoryIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is the history entry index into the table."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 1 }
wwpLeosCfmExtMEPDelayHistoryStatus OBJECT-TYPE
SYNTAX INTEGER {
running(1),
done(2),
canceled(3),
timeout(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the test sent on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 2 }
wwpLeosCfmExtMEPDelayHistoryInterval OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmit rate of the Y.1731 DMM Frames sent on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 3 }
wwpLeosCfmExtMEPDelayHistoryPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The priority of the Y.1731 DMM Frames sent on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 4 }
wwpLeosCfmExtMEPDelayHistoryMEPId OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote MEP id the test was ran against."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 5 }
wwpLeosCfmExtMEPDelayHistoryNumDMMSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of DMM frames sent on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 6 }
wwpLeosCfmExtMEPDelayHistoryNumDMRReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 7 }
wwpLeosCfmExtMEPDelayHistoryMinDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum delay(us) seen on DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 8 }
wwpLeosCfmExtMEPDelayHistoryAveDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average delay(us) seen on DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 9 }
wwpLeosCfmExtMEPDelayHistoryMaxDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum delay(us) seen on DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 10 }
wwpLeosCfmExtMEPDelayHistoryMinJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum jitter(us) seen on DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 11 }
wwpLeosCfmExtMEPDelayHistoryAveJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average jitter(us) seen on DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 12 }
wwpLeosCfmExtMEPDelayHistoryMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum jitter(us) seen on DMR frames received on the given service and MEP."
::= { wwpLeosCfmExtMEPDelayHistoryEntry 13 }
wwpLeosCfmExtMEPDelayHistoryStartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time the test began on the given service and MEP.
The timestamp is the number of seconds since 12AM Jan 1st, 1970"
::= { wwpLeosCfmExtMEPDelayHistoryEntry 14 }
wwpLeosCfmExtMEPDelayHistoryStopTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time the test terminated on the given service and MEP.
The timestamp is the number of seconds since 12AM Jan 1st, 1970"
::= { wwpLeosCfmExtMEPDelayHistoryEntry 15 }
wwpLeosCfmExtMEPDelayHistoryClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to clear will clear MEP delay history for the
given service and MepId. This object can't be set to none"
::= { wwpLeosCfmExtMEPDelayHistoryEntry 16 }
--
-- Link Trace Message table
--
wwpLeosCfmExtLinkTraceMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtLinkTraceMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the LinkTraceMsg."
::= { wwpLeosCfmExtLinkTrace 1 }
wwpLeosCfmExtLinkTraceMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtLinkTraceMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtLinkTraceMsgLocalMepID}
::= { wwpLeosCfmExtLinkTraceMsgTable 1 }
WwpLeosCfmExtLinkTraceMsgEntry ::= SEQUENCE {
wwpLeosCfmExtLinkTraceMsgLocalMepID INTEGER,
-- wwpLeosCfmExtLinkTraceMsgPortId INTEGER,
wwpLeosCfmExtLinkTraceMsgTargetMEPID INTEGER,
wwpLeosCfmExtLinkTraceMsgTargetMacAddr MacAddress,
wwpLeosCfmExtLinkTraceMsgTTL INTEGER,
wwpLeosCfmExtLinkTraceMsgSequenceNumber Integer32,
wwpLeosCfmExtLinkTraceMsgPriority INTEGER,
wwpLeosCfmExtLinkTraceMsgAction SendState
}
wwpLeosCfmExtLinkTraceMsgLocalMepID OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represent local mepid"
::= { wwpLeosCfmExtLinkTraceMsgEntry 1}
-- wwpLeosCfmExtLinkTraceMsgPortId OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object is used to specify the port."
-- ::= { wwpLeosCfmExtLinkTraceMsgEntry 1 }
wwpLeosCfmExtLinkTraceMsgTargetMEPID OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the target MEPID.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmExtLinkTraceMsgEntry 2 }
wwpLeosCfmExtLinkTraceMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the target MacAddress to be used when sending link LinkMsg.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosCfmExtLinkTraceMsgEntry 3 }
wwpLeosCfmExtLinkTraceMsgTTL OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the TTL to be used when sending link LinkTraceMsg."
::= { wwpLeosCfmExtLinkTraceMsgEntry 4 }
wwpLeosCfmExtLinkTraceMsgSequenceNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the sequence number in the linkTraceMsg."
::= { wwpLeosCfmExtLinkTraceMsgEntry 5 }
wwpLeosCfmExtLinkTraceMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the priority to be used when sending LinkTraceMsg."
::= { wwpLeosCfmExtLinkTraceMsgEntry 6 }
wwpLeosCfmExtLinkTraceMsgAction OBJECT-TYPE
SYNTAX SendState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the action for the message (send, clear or cancel)
If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMacAddr is specified
then LinkTraceMsg is sent to remote Mac.
If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMEPID is specified
then LinktraceMsg is sent to remote mepid.
If set to clear(2) will clear mep statistics for given service and mepid.
If set to cancel(3) will return commit_failed_error. "
::= {wwpLeosCfmExtLinkTraceMsgEntry 7}
--
-- Link Trace Message Reply table
--
wwpLeosCfmExtLinkTraceMsgReplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtLinkTraceMsgReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the LinkTrace Msg Reply."
::= { wwpLeosCfmExtLinkTrace 2 }
wwpLeosCfmExtLinkTraceMsgReplyEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtLinkTraceMsgReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmExtLinkTraceMsgReplyTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtLinkTraceMsgLocalMepID, wwpLeosCfmExtLinkTraceMsgReplyTTL, wwpLeosCfmExtLinkTraceMsgReplyTTLIndex}
::= { wwpLeosCfmExtLinkTraceMsgReplyTable 1 }
WwpLeosCfmExtLinkTraceMsgReplyEntry ::= SEQUENCE {
wwpLeosCfmExtLinkTraceMsgReplyTTL Integer32,
wwpLeosCfmExtLinkTraceMsgReplyTTLIndex Unsigned32,
wwpLeosCfmExtLinkTraceMsgReplySequenceNumber Integer32,
wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr MacAddress,
wwpLeosCfmExtLinkTraceMsgReplyMEPID Integer32,
wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr MacAddress,
wwpLeosCfmExtLinkTraceMsgReplyRelayAction INTEGER,
wwpLeosCfmExtLinkTraceMsgReplyIngressPort INTEGER,
wwpLeosCfmExtLinkTraceMsgReplyIngressAction INTEGER,
wwpLeosCfmExtLinkTraceMsgReplyEgressPort INTEGER,
wwpLeosCfmExtLinkTraceMsgReplyEgressAction INTEGER,
wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr DisplayString,
wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr DisplayString
}
wwpLeosCfmExtLinkTraceMsgReplyTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the TTL of the received LinkTrace msg reply."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 1 }
wwpLeosCfmExtLinkTraceMsgReplyTTLIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..24576)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides an additional index when multiple LinkTrace messages are received with the same TTL."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 2 }
wwpLeosCfmExtLinkTraceMsgReplySequenceNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the sequence number of the received LinkTrace msg reply."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 3 }
wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the mac address of the MP of received LinkTrace msg reply."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 4 }
wwpLeosCfmExtLinkTraceMsgReplyMEPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the MEP ID of the received LinkTrace msg reply."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 5 }
wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Target Mac address of the received LinkTrace msg reply."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 6 }
wwpLeosCfmExtLinkTraceMsgReplyRelayAction OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
unknown(2),
fdb(3),
mpdb(4),
noLearn(5),
hit(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply relay action."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 7 }
wwpLeosCfmExtLinkTraceMsgReplyIngressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is used to specify the message reply ingress port."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 8 }
wwpLeosCfmExtLinkTraceMsgReplyIngressAction OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
blocked(2),
vid(3),
down(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply ingress action."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 9 }
wwpLeosCfmExtLinkTraceMsgReplyEgressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is used to specify the message reply egress port."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 10 }
wwpLeosCfmExtLinkTraceMsgReplyEgressAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ttl(2),
down(3),
blocked(4),
vid(5),
ok(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the message reply egress action."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 11 }
wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object is used to specify the message reply ingress port."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 12 }
wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object is used to specify the message reply egress port."
::= { wwpLeosCfmExtLinkTraceMsgReplyEntry 13 }
--
-- Delay Measurement Msg table
--
wwpLeosCfmExtDelayMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtDelayMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the DelayMeasurementMsg."
::= { wwpLeosCfmExtDelay 1 }
wwpLeosCfmExtDelayMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtDelayMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set.
To send or cancel a message, the TargetMepID or the
TargtetMacAddr objects need to be specified.
Clear msgAction clears the counters for the message"
--wwpLeosCfmExtDelayMsgLocalMEPId is a new index in place of delayMsgPortId
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtDelayMsgLocalMEPId}
::= { wwpLeosCfmExtDelayMsgTable 1 }
WwpLeosCfmExtDelayMsgEntry ::= SEQUENCE {
wwpLeosCfmExtDelayMsgLocalMEPId INTEGER,
wwpLeosCfmExtDelayMsgTargetMEPID Unsigned32,
wwpLeosCfmExtDelayMsgTargetMacAddr MacAddress,
wwpLeosCfmExtDelayMsgCount INTEGER,
wwpLeosCfmExtDelayMsgPriority INTEGER,
wwpLeosCfmExtDelayMsgRepeat INTEGER,
wwpLeosCfmExtDelayMsgRepeatCount INTEGER,
wwpLeosCfmExtDelayMsgDelayThreshold INTEGER,
wwpLeosCfmExtDelayMsgJitterThreshold INTEGER,
wwpLeosCfmExtDelayMsgAction SendState,
wwpLeosCfmExtDelayMsgMaxDelayThreshold INTEGER,
wwpLeosCfmExtDelayMsgMaxJitterThreshold INTEGER
}
wwpLeosCfmExtDelayMsgLocalMEPId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the local MEPId."
::= { wwpLeosCfmExtDelayMsgEntry 1 }
wwpLeosCfmExtDelayMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmExtDelayMsgEntry 2 }
wwpLeosCfmExtDelayMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmExtDelayMsgTargetMEPID is not specified else
error will be returned."
::= {wwpLeosCfmExtDelayMsgEntry 3 }
wwpLeosCfmExtDelayMsgCount OBJECT-TYPE
SYNTAX INTEGER (0 | 2..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg. Counts between 2 and 600 are valid. The system
default count will be used if a value of 0 is entered."
::= { wwpLeosCfmExtDelayMsgEntry 4 }
wwpLeosCfmExtDelayMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg."
::= { wwpLeosCfmExtDelayMsgEntry 5 }
wwpLeosCfmExtDelayMsgRepeat OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to make the Delay Measurement test a repeating test."
::= { wwpLeosCfmExtDelayMsgEntry 8 }
wwpLeosCfmExtDelayMsgRepeatCount OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The repeat time in minutes for the Delay Measurement test.
If zero is specified, the test runs continuously."
::= { wwpLeosCfmExtDelayMsgEntry 9 }
wwpLeosCfmExtDelayMsgDelayThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the fault Threshold for the average delay, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the average delay result of the
test and a fault will be generated if the threshold is exceeded."
::= {wwpLeosCfmExtDelayMsgEntry 41 }
wwpLeosCfmExtDelayMsgJitterThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the fault threshold value for the average Jitter, specified
in microseconds. A value of -1 disables the generation of faults,
0 or greater will be compared to the average jitter result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmExtDelayMsgEntry 42 }
wwpLeosCfmExtDelayMsgAction OBJECT-TYPE
SYNTAX SendState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the action for the message (send, clear or cancel)
If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified
then loopbackMsg is sent to remote Mac.
If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified
then loopbackMsg is sent to remote mepid.
If set to clear(2) will clear mep statistics for given service and mepid.
If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified
then it will cancel sending Delay messages to remoteMac.
If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified
then it will cancel sending Delay messages to remoteMEPID."
::= { wwpLeosCfmExtDelayMsgEntry 43 }
wwpLeosCfmExtDelayMsgMaxDelayThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the Threshold for the maximum Delay, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the maximum delay result of the
test and a fault will be generated if the threshold is exceeded."
::= {wwpLeosCfmExtDelayMsgEntry 44 }
wwpLeosCfmExtDelayMsgMaxJitterThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold value for the maximum Jitter, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the maximum jitter result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmExtDelayMsgEntry 45 }
--
-- Frame Loss Measurement Msg table
--
wwpLeosCfmExtFrameLossMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtFrameLossMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the FrameLossMeasurementMsg."
::= { wwpLeosCfmExtFrameLoss 1 }
wwpLeosCfmExtFrameLossMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtFrameLossMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set.
RowStatus is a read-only field.
To send or cancel a message, the TargetMepID or the
TargtetMacAddr objects need to be specified.
Clear msgAction clears the counters for the message"
--wwpLeosCfmExtFrameLossMsgLocalMEPId is a new index in place of framelossmsgportId
INDEX {wwpLeosCfmServiceIndex, wwpLeosCfmExtFrameLossMsgLocalMEPId}
::= { wwpLeosCfmExtFrameLossMsgTable 1 }
WwpLeosCfmExtFrameLossMsgEntry ::= SEQUENCE {
wwpLeosCfmExtFrameLossMsgLocalMEPId INTEGER,
wwpLeosCfmExtFrameLossMsgTargetMEPID Unsigned32,
wwpLeosCfmExtFrameLossMsgTargetMacAddr MacAddress,
wwpLeosCfmExtFrameLossMsgCount INTEGER,
wwpLeosCfmExtFrameLossMsgPriority INTEGER,
wwpLeosCfmExtFrameLossMsgRepeat INTEGER,
wwpLeosCfmExtFrameLossMsgRepeatCount INTEGER,
wwpLeosCfmExtFrameLossMsgFlnThreshold INTEGER,
wwpLeosCfmExtFrameLossMsgFlfThreshold INTEGER,
wwpLeosCfmExtFrameLossMsgAction SendState,
wwpLeosCfmExtFrameLossMsgSeqThreshold INTEGER
}
wwpLeosCfmExtFrameLossMsgLocalMEPId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the Local MEPID at teh source."
::= { wwpLeosCfmExtFrameLossMsgEntry 1 }
wwpLeosCfmExtFrameLossMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosCfmExtFrameLossMsgEntry 2 }
wwpLeosCfmExtFrameLossMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosCfmExtFrameLossMsgEntry 3 }
wwpLeosCfmExtFrameLossMsgCount OBJECT-TYPE
SYNTAX INTEGER (2..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg."
::= { wwpLeosCfmExtFrameLossMsgEntry 4 }
wwpLeosCfmExtFrameLossMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg."
::= { wwpLeosCfmExtFrameLossMsgEntry 5 }
wwpLeosCfmExtFrameLossMsgRepeat OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to make the Frame Loss Measurement test a repeating test."
::= { wwpLeosCfmExtFrameLossMsgEntry 8 }
wwpLeosCfmExtFrameLossMsgRepeatCount OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The repeat time in minutes for the Frame Loss Measurement test.
If zero is specified, the test runs continuously."
::= { wwpLeosCfmExtFrameLossMsgEntry 9 }
wwpLeosCfmExtFrameLossMsgFlnThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss near result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmExtFrameLossMsgEntry 10 }
wwpLeosCfmExtFrameLossMsgFlfThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmExtFrameLossMsgEntry 11 }
wwpLeosCfmExtFrameLossMsgAction OBJECT-TYPE
SYNTAX SendState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the action for the message (send, clear or cancel)
This object represents the action for the message (send, clear or cancel)
If set to send(1) and if wwpLeosCfmExtFrameLossMacAddr is specified
then FrameLoss is sent to remote Mac.
If set to send(1) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified
then FrameLossMsg is sent to remote mepid.
If set to clear(2) will clear mep statistics for given service and mepid.
If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMacAddr is specified
then it will cancel sending FrameLoss Messages to remoteMac.
If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified
then it will cancel sending FrameLoss messages to remoteMEPID."
::= { wwpLeosCfmExtFrameLossMsgEntry 12 }
wwpLeosCfmExtFrameLossMsgSeqThreshold OBJECT-TYPE
SYNTAX INTEGER (-1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sequence threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the threshold is exceeded."
::= { wwpLeosCfmExtFrameLossMsgEntry 13 }
--
-- CFM EXT Port Stack Table
--
wwpLeosCfmExtInterfaceStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtInterfaceStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the CFM port stack table."
::= { wwpLeosCfmExtInterfaceStack 1 }
wwpLeosCfmExtInterfaceStackEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtInterfaceStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosTceCfmPortStackTable."
INDEX {wwpLeosCfmExtInterfaceStackServiceInstanceType,
wwpLeosCfmExtInterfaceStackServiceInstanceIndex,
wwpLeosCfmExtInterfaceStackInterfaceType,
wwpLeosCfmExtInterfaceStackInterfaceIndex,
wwpLeosCfmExtInterfaceStackStackType,
wwpLeosCfmExtInterfaceStackLevel
}
::= { wwpLeosCfmExtInterfaceStackTable 1 }
WwpLeosCfmExtInterfaceStackEntry ::= SEQUENCE {
wwpLeosCfmExtInterfaceStackServiceInstanceType INTEGER,
wwpLeosCfmExtInterfaceStackServiceInstanceIndex Unsigned32,
wwpLeosCfmExtInterfaceStackInterfaceType INTEGER,
wwpLeosCfmExtInterfaceStackInterfaceIndex Unsigned32,
wwpLeosCfmExtInterfaceStackLevel Unsigned32,
wwpLeosCfmExtInterfaceStackStackType INTEGER,
wwpLeosCfmExtInterfaceStackInterfaceName DisplayString,
wwpLeosCfmExtInterfaceStackServiceInstanceName DisplayString,
wwpLeosCfmExtInterfaceStackPortName DisplayString,
wwpLeosCfmExtInterfaceStackOperState INTEGER,
wwpLeosCfmExtInterfaceStackVid INTEGER,
wwpLeosCfmExtInterfaceStackPgid Unsigned32,
wwpLeosCfmExtInterfaceStackMEPId INTEGER,
wwpLeosCfmExtInterfaceStackMacAddress MacAddress
}
wwpLeosCfmExtInterfaceStackServiceInstanceType OBJECT-TYPE
SYNTAX INTEGER {
ethVs(1),
vlan(2),
pbtTunnel(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM port service type."
::= { wwpLeosCfmExtInterfaceStackEntry 1 }
wwpLeosCfmExtInterfaceStackServiceInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for CFM domain entry."
::= { wwpLeosCfmExtInterfaceStackEntry 2 }
wwpLeosCfmExtInterfaceStackInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
logicalPort(1),
pbtEncap(2),
pbtDecap(3),
none(99)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface type."
::= { wwpLeosCfmExtInterfaceStackEntry 3 }
wwpLeosCfmExtInterfaceStackInterfaceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub port index."
::= { wwpLeosCfmExtInterfaceStackEntry 4 }
wwpLeosCfmExtInterfaceStackLevel OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface level."
::= { wwpLeosCfmExtInterfaceStackEntry 5 }
wwpLeosCfmExtInterfaceStackStackType OBJECT-TYPE
SYNTAX INTEGER {
mepUp(1),
mepDown(2),
mipUp(3),
mipDown(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface type."
::= { wwpLeosCfmExtInterfaceStackEntry 6 }
wwpLeosCfmExtInterfaceStackInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface name."
::= { wwpLeosCfmExtInterfaceStackEntry 7 }
wwpLeosCfmExtInterfaceStackServiceInstanceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface name."
::= { wwpLeosCfmExtInterfaceStackEntry 8 }
wwpLeosCfmExtInterfaceStackPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface port name."
::= { wwpLeosCfmExtInterfaceStackEntry 9 }
wwpLeosCfmExtInterfaceStackOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface oper state."
::= { wwpLeosCfmExtInterfaceStackEntry 10 }
wwpLeosCfmExtInterfaceStackVid OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface vid."
::= { wwpLeosCfmExtInterfaceStackEntry 11 }
wwpLeosCfmExtInterfaceStackPgid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface pgid."
::= { wwpLeosCfmExtInterfaceStackEntry 12 }
wwpLeosCfmExtInterfaceStackMEPId OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface mepid."
::= { wwpLeosCfmExtInterfaceStackEntry 13 }
wwpLeosCfmExtInterfaceStackMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface macaddress."
::= { wwpLeosCfmExtInterfaceStackEntry 14 }
--
-- CFM EXT MIP Table
--
wwpLeosCfmExtMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM Ext MIP Table.
This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel.
Any Get/Set/Walk will return error."
::= { wwpLeosCfmExtMIP 1 }
wwpLeosCfmExtMipEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmExtMipTable."
INDEX {wwpLeosCfmExtMipVid, wwpLeosCfmExtMipPort, wwpLeosCfmExtMipLevel}
::= { wwpLeosCfmExtMipTable 1 }
WwpLeosCfmExtMipEntry ::= SEQUENCE {
wwpLeosCfmExtMipVid INTEGER,
wwpLeosCfmExtMipPort INTEGER,
wwpLeosCfmExtMipLevel INTEGER,
wwpLeosCfmExtMipStatus RowStatus
}
wwpLeosCfmExtMipVid OBJECT-TYPE
SYNTAX INTEGER (0..24576)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the
VLAN service type for which intermediate maintenance points can be created."
::= { wwpLeosCfmExtMipEntry 1 }
wwpLeosCfmExtMipPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used as index in the table and is used to specify the
port."
::= { wwpLeosCfmExtMipEntry 2 }
wwpLeosCfmExtMipLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level attribute."
::= { wwpLeosCfmExtMipEntry 3 }
wwpLeosCfmExtMipStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'destroy'."
::= { wwpLeosCfmExtMipEntry 4 }
--
-- CFM EXT Interface MIP Table
--
wwpLeosCfmExtInterfaceMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtInterfaceMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the configuration
parameters for the CFM Ext MIP SI Table."
::= { wwpLeosCfmExtInterfaceMIP 1 }
wwpLeosCfmExtInterfaceMipEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtInterfaceMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmExtInterfaceMipTable."
INDEX {wwpLeosCfmExtInterfaceMipServiceInstanceType,
wwpLeosCfmExtInterfaceMipServiceInstanceIndex,
wwpLeosCfmExtInterfaceMipInterfaceType,
wwpLeosCfmExtInterfaceMipInterfaceIndex,
wwpLeosCfmExtInterfaceMipInterfaceSubIndex,
wwpLeosCfmExtInterfaceMipLevel}
::= { wwpLeosCfmExtInterfaceMipTable 1 }
WwpLeosCfmExtInterfaceMipEntry ::= SEQUENCE {
wwpLeosCfmExtInterfaceMipServiceInstanceType INTEGER,
wwpLeosCfmExtInterfaceMipServiceInstanceIndex Unsigned32,
wwpLeosCfmExtInterfaceMipInterfaceType INTEGER,
wwpLeosCfmExtInterfaceMipInterfaceIndex Unsigned32,
wwpLeosCfmExtInterfaceMipInterfaceSubIndex Unsigned32,
wwpLeosCfmExtInterfaceMipLevel INTEGER,
wwpLeosCfmExtInterfaceMipStatus RowStatus
}
wwpLeosCfmExtInterfaceMipServiceInstanceType OBJECT-TYPE
SYNTAX INTEGER {
ethVs(1),
vlan(2),
pbtTunnel(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the service instance type.
Interpretation of wwpLeosCfmExtInterfaceMipServiceInstanceIndex depends on the value of this MIB object."
::= { wwpLeosCfmExtInterfaceMipEntry 1 }
wwpLeosCfmExtInterfaceMipServiceInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the service instance index.
Interpretation of this object depends on the value of wwpLeosCfmExtInterfaceMipServiceInstanceType."
::= { wwpLeosCfmExtInterfaceMipEntry 2 }
wwpLeosCfmExtInterfaceMipInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
portVlan(1),
pbtEncap(2),
pbtDecap(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM interface type."
::= { wwpLeosCfmExtInterfaceMipEntry 3 }
wwpLeosCfmExtInterfaceMipInterfaceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify an interface index.
When the value of object wwpLeosCfmExtInterfaceMipInterfaceType
is portVlan this obect refers to a port."
::= { wwpLeosCfmExtInterfaceMipEntry 4 }
wwpLeosCfmExtInterfaceMipInterfaceSubIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify a sub interface index.
When the value of object wwpLeosCfmExtInterfaceMipInterfaceType
is portVlan this obect refers to a vlan."
::= { wwpLeosCfmExtInterfaceMipEntry 5 }
wwpLeosCfmExtInterfaceMipLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level attribute."
::= { wwpLeosCfmExtInterfaceMipEntry 6 }
wwpLeosCfmExtInterfaceMipStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'destroy'."
::= { wwpLeosCfmExtInterfaceMipEntry 7 }
--
-- CFM OAM Port Table
--
wwpLeosCfmExtOamPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosCfmExtOamPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing if a port is OAM capable. "
::= { wwpLeosCfmExtOamPort 1 }
wwpLeosCfmExtOamPortEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtOamPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmExtOamPortTable."
INDEX {wwpLeosCfmExtOamPortIndex }
::= { wwpLeosCfmExtOamPortTable 1 }
WwpLeosCfmExtOamPortEntry ::= SEQUENCE {
wwpLeosCfmExtOamPortIndex Integer32,
wwpLeosCfmExtOamPortSupported TruthValue
}
wwpLeosCfmExtOamPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..3072)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the port index."
::= { wwpLeosCfmExtOamPortEntry 1 }
wwpLeosCfmExtOamPortSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies if the port is OAM capable."
::= { wwpLeosCfmExtOamPortEntry 2 }
--
-- TCE CFM
--
wwpLeosTceCfmMIBObj OBJECT IDENTIFIER ::= { wwpLeosCfmMIBObjects 20 }
wwpLeosTceCfmMIP OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 1 }
wwpLeosTceCfmLoopback OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 3 }
wwpLeosTceCfmStack OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 5 }
wwpLeosTceCfmMEP OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 7}
wwpLeosTceCfmDelay OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 12}
wwpLeosTceCfmFrameLoss OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 13}
wwpLeosTceCfmMipCCMDb OBJECT IDENTIFIER ::= { wwpLeosTceCfmMIBObj 14 }
--
-- TCE CFM MIP Table
--
wwpLeosTceCfmMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the config
parameters for the CFM MIP Table. This table is not applicable
if wwpLeosTceCfmServiceType is set to pbtTunnel.
Any Get/Set/Walk will return error.
Not applicable to 6.x"
::= { wwpLeosTceCfmMIP 1 }
wwpLeosTceCfmMipEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosTceCfmMipTable."
INDEX {wwpLeosTceCfmMipLiType, wwpLeosTceCfmMipLiIndex}
::= { wwpLeosTceCfmMipTable 1 }
WwpLeosTceCfmMipEntry ::= SEQUENCE {
wwpLeosTceCfmMipLiType INTEGER,
wwpLeosTceCfmMipLiIndex INTEGER,
wwpLeosTceCfmMipPgid Unsigned32,
wwpLeosTceCfmMipBayIndex Unsigned32,
wwpLeosTceCfmMipShelfIndex Unsigned32,
wwpLeosTceCfmMipModuleIndex Unsigned32,
wwpLeosTceCfmMipMacAddr MacAddress,
wwpLeosTceCfmMipLevel INTEGER,
wwpLeosTceCfmMipStatus RowStatus,
wwpLeosTceCfmMipLiName DisplayString
}
wwpLeosTceCfmMipLiType OBJECT-TYPE
SYNTAX INTEGER {
subPort(1),
pbtService(2),
mplsStaticPeMeshVC(3),
mplsDynamicPeMeshVC(4),
mplsStaticPeSpokeVC(5),
mplsDynamicPeSpokeVC(6),
mplsStaticMtuSpokeVC(7),
mplsDynamicMtuSpokeVC(8),
none(99)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies an unique index into the table."
::= { wwpLeosTceCfmMipEntry 1 }
wwpLeosTceCfmMipLiIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies an unique index into the table."
::= { wwpLeosTceCfmMipEntry 2 }
wwpLeosTceCfmMipPgid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the port group id."
::= { wwpLeosTceCfmMipEntry 3 }
wwpLeosTceCfmMipBayIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the chassis bay."
::= { wwpLeosTceCfmMipEntry 4 }
wwpLeosTceCfmMipShelfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the chassis shelf."
::= { wwpLeosTceCfmMipEntry 5 }
wwpLeosTceCfmMipModuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the chassis module."
::= { wwpLeosTceCfmMipEntry 6 }
wwpLeosTceCfmMipMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Mac Address."
::= { wwpLeosTceCfmMipEntry 7 }
wwpLeosTceCfmMipLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the level attribute."
::= { wwpLeosTceCfmMipEntry 8 }
wwpLeosTceCfmMipStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'destroy'."
::= { wwpLeosTceCfmMipEntry 9 }
wwpLeosTceCfmMipLiName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Logical interface name associated with the Mip."
::= { wwpLeosTceCfmMipEntry 10 }
--
-- CFM Mip CCM Db Table
--
wwpLeosTceCfmMipCCMDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmMipCCMDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the MIP CCM Db table.
Not applicable to 6.x"
::= { wwpLeosTceCfmMipCCMDb 1 }
wwpLeosTceCfmMipCCMDbEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmMipCCMDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable."
INDEX { wwpLeosTceCfmMipCCMDbIndex }
::= { wwpLeosTceCfmMipCCMDbTable 1 }
WwpLeosTceCfmMipCCMDbEntry ::= SEQUENCE {
wwpLeosTceCfmMipCCMDbIndex Unsigned32,
wwpLeosTceCfmMipCCMDbMacAddr MacAddress,
wwpLeosTceCfmMipCCMDbServiceName DisplayString,
wwpLeosTceCfmMipCCMDbSubPortName DisplayString,
wwpLeosTceCfmMipCCMdbNumCCMRx Counter32,
wwpLeosTceCfmMipCCMDbCCMRxTime Unsigned32,
wwpLeosTceCfmMipCCMDbLevel INTEGER,
wwpLeosTceCfmMipCCMDbMEPID INTEGER,
wwpLeosTceCfmMipRDI INTEGER,
wwpLeosTceCfmMipLastPortStatus INTEGER
}
wwpLeosTceCfmMipCCMDbIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Mip CCM database index."
::= { wwpLeosTceCfmMipCCMDbEntry 1 }
wwpLeosTceCfmMipCCMDbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC Address"
::= { wwpLeosTceCfmMipCCMDbEntry 2 }
wwpLeosTceCfmMipCCMDbServiceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service Name"
::= { wwpLeosTceCfmMipCCMDbEntry 3 }
wwpLeosTceCfmMipCCMDbSubPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SubPort Name"
::= { wwpLeosTceCfmMipCCMDbEntry 4 }
wwpLeosTceCfmMipCCMdbNumCCMRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total Received CCMs"
::= { wwpLeosTceCfmMipCCMDbEntry 5 }
wwpLeosTceCfmMipCCMDbCCMRxTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CCM Rx Time in ms"
::= { wwpLeosTceCfmMipCCMDbEntry 6 }
wwpLeosTceCfmMipCCMDbLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Level"
::= { wwpLeosTceCfmMipCCMDbEntry 7}
wwpLeosTceCfmMipCCMDbMEPID OBJECT-TYPE
SYNTAX INTEGER (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mep Id"
::= { wwpLeosTceCfmMipCCMDbEntry 8}
wwpLeosTceCfmMipRDI OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RDI"
::= { wwpLeosTceCfmMipCCMDbEntry 9 }
wwpLeosTceCfmMipLastPortStatus OBJECT-TYPE
SYNTAX INTEGER {
blocked(1),
up(2),
none(99)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last Port Status"
::= {wwpLeosTceCfmMipCCMDbEntry 10 }
--
-- TCE Loopback Msg table
--
wwpLeosTceCfmLoopbackMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the config parameters for the LoopbackMsg.
The following attributes are required to create a LoopbackMsg:
-- wwpLeosCfmServiceIndex
-- wwpLeosTceCfmLoopbackMsgSubPortIndex
-- wwpLeosTceCfmLoopbackMsgTargetMEPID or
-- wwpLeosTceCfmLoopbackMsgTargetMacAddr
-- wwpLeosTceCfmLoopbackMsgCount
-- wwpLeosTceCfmLoopbackMsgData
-- wwpLeosTceCfmLoopbackMsgPriority
-- wwpLeosTceCfmLoopbackMsgRowStatus
Not applicable to 6.x"
::= { wwpLeosTceCfmLoopback 1 }
wwpLeosTceCfmLoopbackMsgEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosTceCfmLoopbackMsgTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosTceCfmLoopbackMsgLocalMEPID}
::= { wwpLeosTceCfmLoopbackMsgTable 1 }
WwpLeosTceCfmLoopbackMsgEntry ::= SEQUENCE {
wwpLeosTceCfmLoopbackMsgLocalMEPID Unsigned32,
wwpLeosTceCfmLoopbackMsgTargetMEPID Unsigned32,
wwpLeosTceCfmLoopbackMsgTargetMacAddr MacAddress,
wwpLeosTceCfmLoopbackMsgCount INTEGER,
wwpLeosTceCfmLoopbackMsgData DisplayString,
wwpLeosTceCfmLoopbackMsgPriority INTEGER,
wwpLeosTceCfmLoopbackMsgServiceName DisplayString,
wwpLeosTceCfmLoopbackMsgSubPortName DisplayString,
wwpLeosTceCfmLoopbackMsgNextLbmTransId Unsigned32,
wwpLeosTceCfmLoopbackMsgTotalTxLbm Unsigned32,
wwpLeosTceCfmLoopbackMsgTotalRxLbrIo Unsigned32,
wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo Unsigned32,
wwpLeosTceCfmLoopbackMsgRowStatus RowStatus,
wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch Unsigned32,
wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected Unsigned32
}
wwpLeosTceCfmLoopbackMsgLocalMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the port."
::= { wwpLeosTceCfmLoopbackMsgEntry 1 }
wwpLeosTceCfmLoopbackMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMacAddr
is not specified else error will be returned."
::= { wwpLeosTceCfmLoopbackMsgEntry 2 }
wwpLeosTceCfmLoopbackMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending
link LoopbackMsg. This object should only be set if
wwpLeosTceCfmLoopbackMsgTargetMEPID is not specified else error will
be returned."
::= { wwpLeosTceCfmLoopbackMsgEntry 3 }
wwpLeosTceCfmLoopbackMsgCount OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg count to be used when
sending link LoopbackMsg. "
::= { wwpLeosTceCfmLoopbackMsgEntry 4 }
wwpLeosTceCfmLoopbackMsgData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg data to be used when
sending link LoopbackMsg. "
::= { wwpLeosTceCfmLoopbackMsgEntry 5 }
wwpLeosTceCfmLoopbackMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the LoopbackMsg priority to be used when
sending link LoopbackMsg. "
::= { wwpLeosTceCfmLoopbackMsgEntry 6 }
wwpLeosTceCfmLoopbackMsgServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the Service used when
sending link LoopbackMsg."
::= { wwpLeosTceCfmLoopbackMsgEntry 7 }
wwpLeosTceCfmLoopbackMsgSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the sub-port used when
sending link LoopbackMsg."
::= { wwpLeosTceCfmLoopbackMsgEntry 8 }
wwpLeosTceCfmLoopbackMsgNextLbmTransId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify next LoopbackMsg transaction id."
::= { wwpLeosTceCfmLoopbackMsgEntry 9 }
wwpLeosTceCfmLoopbackMsgTotalTxLbm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify total LoopbackMsg sent."
::= { wwpLeosTceCfmLoopbackMsgEntry 10 }
wwpLeosTceCfmLoopbackMsgTotalRxLbrIo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify total in-order LoopbackMsg received."
::= { wwpLeosTceCfmLoopbackMsgEntry 11 }
wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify total out of order LoopbackMsg received."
::= { wwpLeosTceCfmLoopbackMsgEntry 12 }
wwpLeosTceCfmLoopbackMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To send a LoopbackMsg, a manager must
set this object to 'createAndGo'. There is no concept of
delete a LoopbackMsg in this table."
::= { wwpLeosTceCfmLoopbackMsgEntry 13 }
wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify total content mismatch LoopbackMsg received."
::= { wwpLeosTceCfmLoopbackMsgEntry 14 }
wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify total unexpected LoopbackMsg received."
::= { wwpLeosTceCfmLoopbackMsgEntry 15 }
--
-- TCE CFM Port Stack Table
--
wwpLeosTceCfmPortStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmPortStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the display
parameters for the CFM port stack table.
Not applicable to 6.x"
::= { wwpLeosTceCfmStack 1 }
wwpLeosTceCfmPortStackEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmPortStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosTceCfmPortStackTable."
INDEX {wwpLeosTceCfmPortStackServiceType, wwpLeosTceCfmPortStackServiceIndex,
wwpLeosTceCfmPortStackSubPortType, wwpLeosTceCfmPortStackSubPortIndex}
::= { wwpLeosTceCfmPortStackTable 1 }
WwpLeosTceCfmPortStackEntry ::= SEQUENCE {
wwpLeosTceCfmPortStackServiceType INTEGER,
wwpLeosTceCfmPortStackServiceIndex Unsigned32,
wwpLeosTceCfmPortStackSubPortType INTEGER,
wwpLeosTceCfmPortStackSubPortIndex Unsigned32,
wwpLeosTceCfmPortStackSubPortName DisplayString,
wwpLeosTceCfmPortStackOperState INTEGER,
wwpLeosTceCfmPortStackPgid Unsigned32,
wwpLeosTceCfmPortStackBayIndex Unsigned32,
wwpLeosTceCfmPortStackShelfIndex Unsigned32,
wwpLeosTceCfmPortStackModuleIndex Unsigned32,
wwpLeosTceCfmPortStackVsPbtName DisplayString,
wwpLeosTceCfmPortStackEgressXformTagValue1 Unsigned32,
wwpLeosTceCfmPortStackEgressXformTagPriority1 Unsigned32,
wwpLeosTceCfmPortStackEgressXformTagEtype1 Unsigned32,
wwpLeosTceCfmPortStackEgressXformTagValue2 Unsigned32,
wwpLeosTceCfmPortStackEgressXformTagPriority2 Unsigned32,
wwpLeosTceCfmPortStackEgressXformTagEtype2 Unsigned32,
wwpLeosTceCfmPortStackMepCount Unsigned32,
wwpLeosTceCfmPortStackMipLevel Unsigned32
}
wwpLeosTceCfmPortStackServiceType OBJECT-TYPE
SYNTAX INTEGER {
vs(1),
pbt(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port service type."
::= { wwpLeosTceCfmPortStackEntry 1 }
wwpLeosTceCfmPortStackServiceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for CFM domain entry."
::= { wwpLeosTceCfmPortStackEntry 2 }
wwpLeosTceCfmPortStackSubPortType OBJECT-TYPE
SYNTAX INTEGER {
vs(1),
encapPbt(2), -- future release
decapPbt(3) -- future release
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port type."
::= { wwpLeosTceCfmPortStackEntry 3 }
wwpLeosTceCfmPortStackSubPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port index."
::= { wwpLeosTceCfmPortStackEntry 4 }
wwpLeosTceCfmPortStackSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port name."
::= { wwpLeosTceCfmPortStackEntry 5 }
wwpLeosTceCfmPortStackOperState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
invalid(2),
enabled(3),
disabled(4),
notAuthenticated(5),
loopbackTx(6),
loopbackRx(7),
unequipped(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port operational state."
::= { wwpLeosTceCfmPortStackEntry 6 }
wwpLeosTceCfmPortStackPgid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port group id."
::= { wwpLeosTceCfmPortStackEntry 7 }
wwpLeosTceCfmPortStackBayIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port agent bay."
::= { wwpLeosTceCfmPortStackEntry 8 }
wwpLeosTceCfmPortStackShelfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port agent shelf."
::= { wwpLeosTceCfmPortStackEntry 9 }
wwpLeosTceCfmPortStackModuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port agent slot.
Index value of 255 is reserved for Lag ports."
::= { wwpLeosTceCfmPortStackEntry 10 }
wwpLeosTceCfmPortStackVsPbtName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the CFM PBT name."
::= { wwpLeosTceCfmPortStackEntry 11 }
wwpLeosTceCfmPortStackEgressXformTagValue1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the egress tag value."
::= { wwpLeosTceCfmPortStackEntry 13 }
wwpLeosTceCfmPortStackEgressXformTagPriority1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the egress tag priority."
::= { wwpLeosTceCfmPortStackEntry 14 }
wwpLeosTceCfmPortStackEgressXformTagEtype1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the egress tag etype."
::= { wwpLeosTceCfmPortStackEntry 15 }
wwpLeosTceCfmPortStackEgressXformTagValue2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the egress tag value."
::= { wwpLeosTceCfmPortStackEntry 16 }
wwpLeosTceCfmPortStackEgressXformTagPriority2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the egress tag priority."
::= { wwpLeosTceCfmPortStackEntry 17 }
wwpLeosTceCfmPortStackEgressXformTagEtype2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the egress tag etype."
::= { wwpLeosTceCfmPortStackEntry 18 }
wwpLeosTceCfmPortStackMepCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the MEP counts in both directions."
::= { wwpLeosTceCfmPortStackEntry 19 }
wwpLeosTceCfmPortStackMipLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the port stack MIP level."
::= { wwpLeosTceCfmPortStackEntry 20 }
--
-- CFM MEP Table
--
wwpLeosTceCfmMEPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the config
parameters for the CFM MEP table.
Not applicable to 6.x"
::= { wwpLeosTceCfmMEP 1 }
wwpLeosTceCfmMEPEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmMEPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmMEPTable."
INDEX {wwpLeosCfmServiceIndex, wwpLeosTceCfmMEPId}
::= { wwpLeosTceCfmMEPTable 1 }
WwpLeosTceCfmMEPEntry ::= SEQUENCE {
wwpLeosTceCfmMEPId Unsigned32,
wwpLeosTceCfmMEPAdminState INTEGER,
wwpLeosTceCfmMEPOperState INTEGER,
wwpLeosTceCfmMEPDirection INTEGER,
wwpLeosTceCfmMEPCCMState INTEGER,
wwpLeosTceCfmMEPCCMPriority INTEGER,
wwpLeosTceCfmMEPLTMPriority INTEGER,
wwpLeosTceCfmMEPMacAddr MacAddress,
wwpLeosTceCfmMEPNextLbmSeqNumber Counter32,
wwpLeosTceCfmMEPRxValidInOrderLoopbackReply Counter32,
wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply Counter32,
wwpLeosTceCfmMEPNextLTMSeqNumber Counter32,
wwpLeosTceCfmMEPNumLoopbackRepliesTxmt Counter32,
wwpLeosTceCfmMEPNumLTMRecevied Counter32,
wwpLeosTceCfmMEPNumLTMTxmt Counter32,
wwpLeosTceCfmMEPNumCCMTxmt Counter32,
wwpLeosTceCfmMEPRowStatus RowStatus,
wwpLeosTceCfmMEPNumDMMSent Counter32,
wwpLeosTceCfmMEPDMMDelay Counter32,
wwpLeosTceCfmMEPDMMJitter Counter32,
wwpLeosTceCfmMEPNumLMMSent Counter32,
wwpLeosTceCfmMEPLMMFrameLossNear Counter32,
wwpLeosTceCfmMEPLMMFrameLossFar Counter32,
wwpLeosTceCfmMEPLiType INTEGER,
wwpLeosTceCfmMEPLiIndex Unsigned32,
wwpLeosTceCfmMEPServiceName DisplayString,
wwpLeosTceCfmMEPSubPortName DisplayString,
wwpLeosTceCfmMEPVsPbtName DisplayString,
wwpLeosTceCfmMEPLogicalPortName DisplayString,
wwpLeosTceCfmMEPSubPortIndex Unsigned32,
wwpLeosTceCfmMEPEncapsulation INTEGER,
wwpLeosTceCfmMEPLeadPortBayIndex Unsigned32,
wwpLeosTceCfmMEPLeadPortShelfIndex Unsigned32,
wwpLeosTceCfmMEPLeadPortModuleIndex Unsigned32,
wwpLeosTceCfmMEPPBTBvid Unsigned32,
wwpLeosTceCfmMEPPBTEtype Unsigned32,
wwpLeosTceCfmMEPNumLbmTxmt Counter32,
wwpLeosTceCfmMEPNumLbmReceived Counter32,
wwpLeosTceCfmMEPNumLoopbackRepliesReceived Counter32,
wwpLeosTceCfmMEPNumLTRepliesTxmt Counter32,
wwpLeosTceCfmMEPNumLTRepliesReceived Counter32,
wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived Counter32,
wwpLeosTceCfmMEPNumCCMReceived Counter32,
wwpLeosTceCfmMEPRxContentMismatchLoopbackReply Counter32,
wwpLeosTceCfmMEPRxUnexpectedLoopbackReply Counter32
}
wwpLeosTceCfmMEPId OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is used as the index in the table.This object specifies the mep id for the given service."
::= { wwpLeosTceCfmMEPEntry 1 }
wwpLeosTceCfmMEPAdminState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the admin state of CFM MEP."
::= { wwpLeosTceCfmMEPEntry 2 }
wwpLeosTceCfmMEPOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the oper state of CFM MEP."
::= { wwpLeosTceCfmMEPEntry 3 }
wwpLeosTceCfmMEPDirection OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type vlan."
::= { wwpLeosTceCfmMEPEntry 4 }
wwpLeosTceCfmMEPCCMState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType."
::= { wwpLeosTceCfmMEPEntry 5 }
wwpLeosTceCfmMEPCCMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specified the priority of CCM messages transmitted."
::= { wwpLeosTceCfmMEPEntry 6 }
wwpLeosTceCfmMEPLTMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the priority received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 7 }
wwpLeosTceCfmMEPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the mac address received on the given service and port.."
::= { wwpLeosTceCfmMEPEntry 8 }
wwpLeosTceCfmMEPNextLbmSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the next lbm sequence number received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 9 }
wwpLeosTceCfmMEPRxValidInOrderLoopbackReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total valid in order loopback replies received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 10 }
wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total valid out of order loopback replies received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 11 }
wwpLeosTceCfmMEPNextLTMSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the next LTM sequence number received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 12 }
wwpLeosTceCfmMEPNumLoopbackRepliesTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the flags total loopback replies transmitted on the given service and port."
::= { wwpLeosTceCfmMEPEntry 13 }
wwpLeosTceCfmMEPNumLTMRecevied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total LTM messages received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 14 }
wwpLeosTceCfmMEPNumLTMTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total ltm transmitted on the given service and port."
::= { wwpLeosTceCfmMEPEntry 15 }
wwpLeosTceCfmMEPNumCCMTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total CCM messages transmitted on the given service and port."
::= { wwpLeosTceCfmMEPEntry 16 }
wwpLeosTceCfmMEPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'."
::= { wwpLeosTceCfmMEPEntry 17 }
wwpLeosTceCfmMEPNumDMMSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total delay measurement messages
transmitted on the given service and port."
::= { wwpLeosTceCfmMEPEntry 18 }
wwpLeosTceCfmMEPDMMDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average delay in microseconds
measured during the last DMM performance test on the given service and port."
::= { wwpLeosTceCfmMEPEntry 19 }
wwpLeosTceCfmMEPDMMJitter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average jitter in microseconds
measured during the last DMM performance test on the given service and port."
::= { wwpLeosTceCfmMEPEntry 20 }
wwpLeosTceCfmMEPNumLMMSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total frame loss measurement messages
transmitted on the given service and port."
::= { wwpLeosTceCfmMEPEntry 21 }
wwpLeosTceCfmMEPLMMFrameLossNear OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of lost frames on the near side
measured during the last LMM performance test on the given service and port."
::= { wwpLeosTceCfmMEPEntry 22 }
wwpLeosTceCfmMEPLMMFrameLossFar OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of lost frames on the far side
measured during the last LMM performance test on the given service and port."
::= { wwpLeosTceCfmMEPEntry 23 }
wwpLeosTceCfmMEPLiType OBJECT-TYPE
SYNTAX INTEGER {
vs(1),
pbtService(2),
mplsStaticPeMeshVC(3),
mplsDynamicPeMeshVC(4),
mplsStaticPeSpokeVC(5),
mplsDynamicPeSpokeVC(6),
mplsStaticMtuSpokeVC(7),
mplsDynamicMtuSpokeVC(8),
none(99)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies Li Type on which the Mep is created."
::= { wwpLeosTceCfmMEPEntry 24 }
wwpLeosTceCfmMEPLiIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies LiIndex for creating MEP"
::= { wwpLeosTceCfmMEPEntry 25 }
wwpLeosTceCfmMEPServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the service name assigned to this port."
::= { wwpLeosTceCfmMEPEntry 50 }
wwpLeosTceCfmMEPSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the sub-port, PbtService or Mpls Vc name assigned to the given service and port."
::= { wwpLeosTceCfmMEPEntry 51 }
wwpLeosTceCfmMEPVsPbtName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the virtual switch or Pbt tunnel assigned to the given service and port."
::= { wwpLeosTceCfmMEPEntry 52 }
wwpLeosTceCfmMEPLogicalPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the logical port name assigned to the given service and port."
::= { wwpLeosTceCfmMEPEntry 53 }
wwpLeosTceCfmMEPSubPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the CFM sub-port index."
::= { wwpLeosTceCfmMEPEntry 54 }
wwpLeosTceCfmMEPEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
ieee802dot1d(1),
pbtCfmEncap(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the encapsulation applied to the service and port."
::= { wwpLeosTceCfmMEPEntry 55 }
wwpLeosTceCfmMEPLeadPortBayIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent bay that MEP is in."
::= { wwpLeosTceCfmMEPEntry 56 }
wwpLeosTceCfmMEPLeadPortShelfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent shelf that MEP is in."
::= { wwpLeosTceCfmMEPEntry 57 }
wwpLeosTceCfmMEPLeadPortModuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table."
::= { wwpLeosTceCfmMEPEntry 58 }
wwpLeosTceCfmMEPPBTBvid OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the BVID assigned to the given service and port."
::= { wwpLeosTceCfmMEPEntry 59 }
wwpLeosTceCfmMEPPBTEtype OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the E-type assigned to the given service and port."
::= { wwpLeosTceCfmMEPEntry 60 }
wwpLeosTceCfmMEPNumLbmTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total loopback messages transmitted on the
given service and port."
::= { wwpLeosTceCfmMEPEntry 61 }
wwpLeosTceCfmMEPNumLbmReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total loopback messages received on the
given service and port."
::= { wwpLeosTceCfmMEPEntry 62 }
wwpLeosTceCfmMEPNumLoopbackRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total loopback replies received on the
given service and port."
::= { wwpLeosTceCfmMEPEntry 63 }
wwpLeosTceCfmMEPNumLTRepliesTxmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total link trace replies transmitted on the
given service and port."
::= { wwpLeosTceCfmMEPEntry 64 }
wwpLeosTceCfmMEPNumLTRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total link trace replies received on the
given service and port."
::= { wwpLeosTceCfmMEPEntry 65 }
wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total unexpected link trace replies received on the
given service and port."
::= { wwpLeosTceCfmMEPEntry 66 }
wwpLeosTceCfmMEPNumCCMReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total CCM messages received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 67 }
wwpLeosTceCfmMEPRxContentMismatchLoopbackReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total content mismatch loopback replies received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 68 }
wwpLeosTceCfmMEPRxUnexpectedLoopbackReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total unexpected loopback replies received on the given service and port."
::= { wwpLeosTceCfmMEPEntry 69 }
--
-- Delay Measurement Msg table
--
wwpLeosTceCfmDelayMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmDelayMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the config
parameters for the DelayMeasurementMsg.
Not applicable to 6.x"
::= { wwpLeosTceCfmDelay 1 }
wwpLeosTceCfmDelayMsgEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmDelayMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set.
RowStatus is a read-only field.
To send or cancel a message, the TargetMepID or the
TargtetMacAddr objects need to be specified.
Clear msgAction clears the counters for the message"
INDEX {wwpLeosCfmServiceIndex, wwpLeosTceCfmDelayMsgLocalMEPId}
::= { wwpLeosTceCfmDelayMsgTable 1 }
WwpLeosTceCfmDelayMsgEntry ::= SEQUENCE {
wwpLeosTceCfmDelayMsgLocalMEPId INTEGER,
wwpLeosTceCfmDelayMsgTargetMEPID Unsigned32,
wwpLeosTceCfmDelayMsgTargetMacAddr MacAddress,
wwpLeosTceCfmDelayMsgCount INTEGER,
wwpLeosTceCfmDelayMsgPriority INTEGER,
wwpLeosTceCfmDelayMsgRowStatus RowStatus,
wwpLeosTceCfmDelayMsgRepeatInterval Unsigned32,
wwpLeosTceCfmDelayMsgDelayThreshold INTEGER,
wwpLeosTceCfmDelayMsgJitterThreshold INTEGER,
wwpLeosTceCfmDelayMsgServiceName DisplayString,
wwpLeosTceCfmDelayMsgSubPortName DisplayString,
wwpLeosTceCfmDelayMsgDelay Unsigned32,
wwpLeosTceCfmDelayMsgJitter Unsigned32,
wwpLeosTceCfmDelayMsgTotalTxDmm Unsigned32,
wwpLeosTceCfmDelayMsgTotalRxDmm Unsigned32,
wwpLeosTceCfmDelayMsgTotalTxDmr Unsigned32,
wwpLeosTceCfmDelayMsgTotalRxDmr Unsigned32,
wwpLeosTceCfmDelayMsgAction SendState,
wwpLeosTceCfmDelayMsgMaxDelay Unsigned32,
wwpLeosTceCfmDelayMsgMaxJitter Unsigned32,
wwpLeosTceCfmDelayMsgMaxDelayThreshold INTEGER,
wwpLeosTceCfmDelayMsgMaxJitterThreshold INTEGER,
wwpLeosTceCfmDelayMsgMinDelay Unsigned32,
wwpLeosTceCfmDelayMsgMinJitter Unsigned32
}
wwpLeosTceCfmDelayMsgLocalMEPId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the local MEPId."
::= { wwpLeosTceCfmDelayMsgEntry 1 }
wwpLeosTceCfmDelayMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosTceCfmDelayMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosTceCfmDelayMsgEntry 2 }
wwpLeosTceCfmDelayMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosTceCfmDelayMsgTargetMEPID is not specified else
error will be returned."
::= {wwpLeosTceCfmDelayMsgEntry 3 }
wwpLeosTceCfmDelayMsgCount OBJECT-TYPE
SYNTAX INTEGER (2..9000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg."
::= { wwpLeosTceCfmDelayMsgEntry 4 }
wwpLeosTceCfmDelayMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg."
::= { wwpLeosTceCfmDelayMsgEntry 5 }
wwpLeosTceCfmDelayMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is a display read-only field only. A row in this table
is created by the system when a service and mep is created"
::= { wwpLeosTceCfmDelayMsgEntry 6 }
wwpLeosTceCfmDelayMsgRepeatInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..1440)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the Transmission Period for the Cfm Delay."
::= { wwpLeosTceCfmDelayMsgEntry 40 }
wwpLeosTceCfmDelayMsgDelayThreshold OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the Threshold for the average delay"
::= {wwpLeosTceCfmDelayMsgEntry 41 }
wwpLeosTceCfmDelayMsgJitterThreshold OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold value for the Jitter"
::= { wwpLeosTceCfmDelayMsgEntry 42 }
wwpLeosTceCfmDelayMsgServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the service to be used when
sending DelayMsg."
::= { wwpLeosTceCfmDelayMsgEntry 43 }
wwpLeosTceCfmDelayMsgSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the sub-port name where the DelayMsg
was sent."
::= { wwpLeosTceCfmDelayMsgEntry 44 }
wwpLeosTceCfmDelayMsgDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Average Delay"
::= { wwpLeosTceCfmDelayMsgEntry 50 }
wwpLeosTceCfmDelayMsgJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the average jitter"
::= { wwpLeosTceCfmDelayMsgEntry 51 }
wwpLeosTceCfmDelayMsgTotalTxDmm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total Delaymessages transmitted"
::= { wwpLeosTceCfmDelayMsgEntry 52 }
wwpLeosTceCfmDelayMsgTotalRxDmm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total Delaymessages received"
::= { wwpLeosTceCfmDelayMsgEntry 53 }
wwpLeosTceCfmDelayMsgTotalTxDmr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total DMRs transmitted"
::= { wwpLeosTceCfmDelayMsgEntry 54 }
wwpLeosTceCfmDelayMsgTotalRxDmr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total DMRs received"
::= { wwpLeosTceCfmDelayMsgEntry 55 }
wwpLeosTceCfmDelayMsgAction OBJECT-TYPE
SYNTAX SendState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the action for the message (send, clear or cancel)"
::= { wwpLeosTceCfmDelayMsgEntry 56 }
wwpLeosTceCfmDelayMsgMaxDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Maximum Delay"
::= { wwpLeosTceCfmDelayMsgEntry 57 }
wwpLeosTceCfmDelayMsgMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Maximum jitter"
::= { wwpLeosTceCfmDelayMsgEntry 58 }
wwpLeosTceCfmDelayMsgMaxDelayThreshold OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold for maximum delay"
::= {wwpLeosTceCfmDelayMsgEntry 59 }
wwpLeosTceCfmDelayMsgMaxJitterThreshold OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold value for maximum Jitter"
::= { wwpLeosTceCfmDelayMsgEntry 60 }
wwpLeosTceCfmDelayMsgMinDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Maximum Delay"
::= { wwpLeosTceCfmDelayMsgEntry 61 }
wwpLeosTceCfmDelayMsgMinJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Maximum jitter"
::= { wwpLeosTceCfmDelayMsgEntry 62 }
--
-- Frame Loss Measurement Msg table
--
wwpLeosTceCfmFrameLossMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosTceCfmFrameLossMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the config
parameters for the FrameLossMeasurementMsg.
Not applicable to 6.x"
::= { wwpLeosTceCfmFrameLoss 1 }
wwpLeosTceCfmFrameLossMsgEntry OBJECT-TYPE
SYNTAX WwpLeosTceCfmFrameLossMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set.
RowStatus is a read-only field.
To send or cancel a message, the TargetMepID or the
TargtetMacAddr objects need to be specified.
Clear msgAction clears the counters for the message"
INDEX {wwpLeosCfmServiceIndex, wwpLeosTceCfmFrameLossMsgLocalMEPId}
::= { wwpLeosTceCfmFrameLossMsgTable 1 }
WwpLeosTceCfmFrameLossMsgEntry ::= SEQUENCE {
wwpLeosTceCfmFrameLossMsgLocalMEPId INTEGER,
wwpLeosTceCfmFrameLossMsgTargetMEPID Unsigned32,
wwpLeosTceCfmFrameLossMsgTargetMacAddr MacAddress,
wwpLeosTceCfmFrameLossMsgCount INTEGER,
wwpLeosTceCfmFrameLossMsgPriority INTEGER,
wwpLeosTceCfmFrameLossMsgRowStatus RowStatus,
wwpLeosTceCfmFrameLossMsgRepeatInterval Unsigned32,
wwpLeosTceCfmFrameLossMsgNearLossThreshold INTEGER,
wwpLeosTceCfmFrameLossMsgFarLossThreshold INTEGER,
wwpLeosTceCfmFrameLossMsgServiceName DisplayString,
wwpLeosTceCfmFrameLossMsgSubPortName DisplayString,
wwpLeosTceCfmFrameLossMsgFrameLossNear Unsigned32,
wwpLeosTceCfmFrameLossMsgFrameLossFar Unsigned32,
wwpLeosTceCfmFrameLossMsgTotalTxLmm Unsigned32,
wwpLeosTceCfmFrameLossMsgTotalRxLmm Unsigned32,
wwpLeosTceCfmFrameLossMsgTotalTxLmr Unsigned32,
wwpLeosTceCfmFrameLossMsgTotalRxLmr Unsigned32,
wwpLeosTceCfmFrameLossMsgAction SendState
}
wwpLeosTceCfmFrameLossMsgLocalMEPId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is used to specify the Local MEPID at the source."
::= { wwpLeosTceCfmFrameLossMsgEntry 1 }
wwpLeosTceCfmFrameLossMsgTargetMEPID OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MEPID.
This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMacAddr is not specified else
error will be returned."
::= { wwpLeosTceCfmFrameLossMsgEntry 2 }
wwpLeosTceCfmFrameLossMsgTargetMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMEPID is not specified else
error will be returned."
::= { wwpLeosTceCfmFrameLossMsgEntry 3 }
wwpLeosTceCfmFrameLossMsgCount OBJECT-TYPE
SYNTAX INTEGER (2..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg."
::= { wwpLeosTceCfmFrameLossMsgEntry 4 }
wwpLeosTceCfmFrameLossMsgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg."
::= { wwpLeosTceCfmFrameLossMsgEntry 5 }
wwpLeosTceCfmFrameLossMsgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is a read-only field. A row in this table is system-generated
on creation of cfm service and cfm mep objects"
::= { wwpLeosTceCfmFrameLossMsgEntry 6 }
wwpLeosTceCfmFrameLossMsgRepeatInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..1440)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the Transmission Interval for the Frame loss messages"
::= { wwpLeosTceCfmFrameLossMsgEntry 50 }
wwpLeosTceCfmFrameLossMsgNearLossThreshold OBJECT-TYPE
SYNTAX INTEGER (0..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold value for the near-end frame loss"
::= { wwpLeosTceCfmFrameLossMsgEntry 51 }
wwpLeosTceCfmFrameLossMsgFarLossThreshold OBJECT-TYPE
SYNTAX INTEGER (0..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold value for the far-end frame loss"
::= { wwpLeosTceCfmFrameLossMsgEntry 52 }
wwpLeosTceCfmFrameLossMsgServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the service to be used when
sending FrameLossMsg (LMM)."
::= { wwpLeosTceCfmFrameLossMsgEntry 53 }
wwpLeosTceCfmFrameLossMsgSubPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the sub-port name to be used when
sending FrameLossMsg (LMM)."
::= { wwpLeosTceCfmFrameLossMsgEntry 54 }
wwpLeosTceCfmFrameLossMsgFrameLossNear OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the near-end Frame Loss. For a MEP,
near-end Frame loss refers to frame loss associated with the
ingress data frames."
::= { wwpLeosTceCfmFrameLossMsgEntry 55 }
wwpLeosTceCfmFrameLossMsgFrameLossFar OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the far-end Frame Loss. For a MEP,
far-end Frame loss refers to frame loss associated with the
egress data frames."
::= { wwpLeosTceCfmFrameLossMsgEntry 56 }
wwpLeosTceCfmFrameLossMsgTotalTxLmm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total LMMs transmitted"
::= { wwpLeosTceCfmFrameLossMsgEntry 57 }
wwpLeosTceCfmFrameLossMsgTotalRxLmm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total LMMs received"
::= { wwpLeosTceCfmFrameLossMsgEntry 58 }
wwpLeosTceCfmFrameLossMsgTotalTxLmr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total LMRs transmitted"
::= { wwpLeosTceCfmFrameLossMsgEntry 59 }
wwpLeosTceCfmFrameLossMsgTotalRxLmr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total LMRs received"
::= { wwpLeosTceCfmFrameLossMsgEntry 60 }
wwpLeosTceCfmFrameLossMsgAction OBJECT-TYPE
SYNTAX SendState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the action for the message (send, clear or cancel)."
::= { wwpLeosTceCfmFrameLossMsgEntry 61 }
--
-- CFM Fault trap control
--
wwpLeosCfmFaultTrapState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'disabled' will cause
CFM fault traps to be suppressed."
DEFVAL { enabled }
::= { wwpLeosCfmFaultNotif 1 }
--
-- Notifications
--
wwpLeosCfmFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceFaultTime,
wwpLeosCfmServiceFaultType,
wwpLeosCfmServiceFaultDesc,
wwpLeosCfmServiceFaultMep
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected."
::= { wwpLeosCfmNotifMIBNotification 1 }
wwpLeosCfmPbtFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceType,
wwpLeosCfmServiceValue,
wwpLeosCfmServiceAdminState,
wwpLeosCfmServiceOperState,
wwpLeosCfmServiceFaultTime,
wwpLeosCfmServiceFaultType,
wwpLeosCfmServiceFaultDesc
}
STATUS deprecated
DESCRIPTION
"A notification is sent whenever the fault is detected for a PBT tunnel.
wwpLeosCfmServiceType will always be set to pbtTunnel."
::= { wwpLeosCfmNotifMIBNotification 2 }
wwpLeosCfmDelayFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPDelay,
wwpLeosCfmDelayMsgDelayThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Delay Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 3 }
wwpLeosCfmJitterFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPJitter,
wwpLeosCfmDelayMsgJitterThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Delay Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 4 }
wwpLeosCfmFrameLossNearFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPFrameLossNear,
wwpLeosCfmFrameLossMsgFlnThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Frame Loss Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 5 }
wwpLeosCfmFrameLossFarFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPFrameLossFar,
wwpLeosCfmFrameLossMsgFlfThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Frame Loss Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 6 }
wwpLeosCfmExtDelayFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPDelay,
wwpLeosCfmExtDelayMsgDelayThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Delay Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 7 }
wwpLeosCfmExtJitterFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPJitter,
wwpLeosCfmExtDelayMsgJitterThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Delay Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 8 }
wwpLeosCfmExtFrameLossNearFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPFrameLossNear,
wwpLeosCfmExtFrameLossMsgFlnThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Frame Loss Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 9 }
wwpLeosCfmExtFrameLossFarFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmRemoteMEPFrameLossFar,
wwpLeosCfmExtFrameLossMsgFlfThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected during
a Frame Loss Measurement test with a fault threshold."
::= { wwpLeosCfmNotifMIBNotification 20 }
wwpLeosCfmExtFaultTrapSet NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceType,
wwpLeosCfmServiceValue,
wwpLeosCfmServiceAdminState,
wwpLeosCfmServiceOperState,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceFaultTime,
wwpLeosCfmServiceFaultType,
wwpLeosCfmServiceFaultDesc,
wwpLeosCfmServiceFaultMep
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected."
::= { wwpLeosCfmNotifMIBNotification 21 }
wwpLeosCfmExtFaultTrapClear NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceType,
wwpLeosCfmServiceValue,
wwpLeosCfmServiceAdminState,
wwpLeosCfmServiceOperState,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceFaultTime,
wwpLeosCfmServiceFaultType,
wwpLeosCfmServiceFaultDesc,
wwpLeosCfmServiceFaultMep }
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is resolved and cleared."
::= { wwpLeosCfmNotifMIBNotification 22 }
wwpLeosCfmBadSequenceFaultTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceVlan,
wwpLeosCfmExtMEPLMMBadSequence,
wwpLeosCfmExtFrameLossMsgSeqThreshold
}
STATUS current
DESCRIPTION
"A notification is sent whenever wwpLeosCfmExtMEPLMMBadSequence exceeds wwpLeosCfmExtFrameLossMsgSeqThreshold
in a Frame Loss Measurement test."
::= { wwpLeosCfmNotifMIBNotification 23 }
wwpLeosCfmBlockOppositeMEPSetTrap NOTIFICATION-TYPE
OBJECTS {
sysName,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceCfmMAID,
wwpLeosCfmExtMEPId,
wwpLeosCfmExtVlanId,
wwpLeosCfmExtMEPTagVID,
wwpLeosCfmExtMEPBlockOppositeFaultCurrent
}
STATUS current
DESCRIPTION "A notification sent whenever the number of frames blocked by the presence
of a MEP of the opposite type exceeds the threshold during the sample window."
::= { wwpLeosCfmNotifMIBNotification 24 }
wwpLeosCfmBlockOppositeMEPClearTrap NOTIFICATION-TYPE
OBJECTS {
sysName,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceCfmMAID,
wwpLeosCfmExtMEPId,
wwpLeosCfmExtVlanId,
wwpLeosCfmExtMEPTagVID
}
STATUS current
DESCRIPTION "A notification sent whenever the number of frames blocked by the presence
of a MEP of the opposite type drops below the threshold during the sample window."
::= { wwpLeosCfmNotifMIBNotification 25 }
--
-- TCE Notifications
--
wwpLeosCfmFaultTrapSet NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceType,
wwpLeosCfmServiceValue,
wwpLeosCfmServiceAdminState,
wwpLeosCfmServiceOperState,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceFaultTime,
wwpLeosCfmServiceFaultType,
wwpLeosCfmServiceFaultDesc,
wwpLeosCfmServiceFaultMep,
wwpLeosCfmServiceVsPbtName
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is detected."
::= { wwpLeosCfmNotifMIBNotification 10 }
wwpLeosCfmFaultTrapClear NOTIFICATION-TYPE
OBJECTS {
wwpLeosCfmServiceName,
wwpLeosCfmServiceType,
wwpLeosCfmServiceValue,
wwpLeosCfmServiceAdminState,
wwpLeosCfmServiceOperState,
wwpLeosCfmServiceMdLevel,
wwpLeosCfmServiceVsPbtName
}
STATUS current
DESCRIPTION
"A notification is sent whenever the fault is resolved and cleared."
::= { wwpLeosCfmNotifMIBNotification 11 }
wwpLeosCfmDmmTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosTceCfmDelayMsgServiceName,
wwpLeosTceCfmDelayMsgLocalMEPId,
--wwpLeosTceCfmDelayMsgTargetMacAddr,
wwpLeosTceCfmDelayMsgDelayThreshold,
wwpLeosTceCfmDelayMsgDelay,
wwpLeosTceCfmDelayMsgJitterThreshold,
wwpLeosTceCfmDelayMsgJitter,
wwpLeosTceCfmDelayMsgMaxJitterThreshold,
wwpLeosTceCfmDelayMsgMaxJitter,
wwpLeosTceCfmDelayMsgMaxDelayThreshold,
wwpLeosTceCfmDelayMsgMaxDelay
}
STATUS current
DESCRIPTION
"A notification is sent whenever delay average goes above delay-threshold during a delay measurement test,
also generated when delay average goes below threshold after going up as a clearing event.
Same notification is generated whenever the average jitter goes above Jitter threshold during a delay measurement test
and when the maximum delay and jitter go above the maximum delay and jitter thresholds respectively.
Also generated when jitter average goes below jitter threshold after going up as a clearing event.
When jitter event is generated, wwpLeosTceCfmDelayMsgDelayThreshold and wwpLeosTceCfmDelayMsgDelay
varbind values are set to 0. Similarly when max delay event is generated wwpLeosTceCfmDelayMsgMaxJitter and
wwpLeosTceCfmDelayMsgMaxJitterThreshold are set to 0 and vice versa"
::= { wwpLeosCfmNotifMIBNotification 12 }
wwpLeosCfmLmmTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosTceCfmFrameLossMsgServiceName,
wwpLeosTceCfmFrameLossMsgLocalMEPId,
--wwpLeosTceCfmFrameLossMsgTargetMacAddr,
wwpLeosTceCfmFrameLossMsgNearLossThreshold,
wwpLeosTceCfmFrameLossMsgFrameLossNear,
wwpLeosTceCfmFrameLossMsgFarLossThreshold,
wwpLeosTceCfmFrameLossMsgFrameLossFar
}
STATUS current
DESCRIPTION
"A notification is sent whenever FrameLoss Near average goes above FrameLoss Near threshold during a
Frame Loss measurement test. Also generated when FrameLoss Near average goes below FrameLoss Near threshold
after going up as a clearing event.
Same notification is generated whenever FrameLoss Far Average goes above Frameloss Far threshold value during a
Frame Loss measurement test. Also generated when Frameloss Far average goes below Frameloss Far threshold after going up
as a clearing event.
When FrameLoss Near event is generated wwpLeosTceCfmFrameLossMsgFrameLossFar and
wwpLeosTceCfmFrameLossMsgFarLossThreshold varbind values are 0"
::= { wwpLeosCfmNotifMIBNotification 13 }
--
-- Add groups into the table
--
--
END
View Git Blame Copy Permalink