969 lines
30 KiB
Plaintext
969 lines
30 KiB
Plaintext
--
|
|
-- WWP-ENVIRON-MIB.my
|
|
--
|
|
--
|
|
|
|
WWP-ENVIRON-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
NOTIFICATION-TYPE, Counter32, Integer32, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
TruthValue, DisplayString
|
|
FROM SNMPv2-TC
|
|
wwpModules
|
|
FROM WWP-SMI;
|
|
|
|
wwpEnvironMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200104031700Z"
|
|
ORGANIZATION "World Wide Packets, Inc"
|
|
CONTACT-INFO
|
|
" Mib Meister
|
|
Postal: World Wide Packets
|
|
P.O. Box 950
|
|
Veradale, WA 99037
|
|
USA
|
|
Phone: +1 509 242 9000
|
|
Email: mib.meister@worldwidepackets.com"
|
|
DESCRIPTION
|
|
"The MIB module for the WWP Specifc environment. It contains the
|
|
environment variables for the WWP System."
|
|
REVISION "200304280000Z" -- 28th April. 2003
|
|
DESCRIPTION
|
|
"Updated the battery status. Added the four notifications
|
|
for the battery state change. The new added notification
|
|
wwpEnvPortalPowerSourceNotification replaces the
|
|
wwpEnvPowerSwitchNotification."
|
|
REVISION "200303110000Z" -- 11th March. 2003
|
|
DESCRIPTION
|
|
"Changed the temperature thresholds to be read-write.
|
|
Added Battery States and updated the notification for the
|
|
battery states. Added dry contact, door and RF notifications."
|
|
REVISION "200104031700Z"
|
|
DESCRIPTION
|
|
"Initial creation."
|
|
::= { wwpModules 13 }
|
|
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
wwpEnvironMIBObjects OBJECT IDENTIFIER ::= { wwpEnvironMIB 1 }
|
|
|
|
wwpEnviron OBJECT IDENTIFIER ::= { wwpEnvironMIBObjects 1 }
|
|
|
|
-- the Battery Module
|
|
|
|
wwpEnvBatteryModule OBJECT IDENTIFIER ::= { wwpEnviron 1 }
|
|
|
|
-- the Power Supply module group.
|
|
|
|
wwpEnvPowerSupplyModule OBJECT IDENTIFIER ::= { wwpEnviron 2 }
|
|
|
|
-- the Fan module group.
|
|
|
|
wwpEnvFanModule OBJECT IDENTIFIER ::= { wwpEnviron 3 }
|
|
|
|
-- the Temp Module
|
|
|
|
wwpEnvTempSensor OBJECT IDENTIFIER ::= { wwpEnviron 4 }
|
|
|
|
-- The Port Power Management Module
|
|
|
|
wwpEnvPortPowerMgmt OBJECT IDENTIFIER ::= { wwpEnviron 5 }
|
|
|
|
-- The Environ Notif Objects
|
|
|
|
wwpEnvNotif OBJECT IDENTIFIER ::= { wwpEnviron 6 }
|
|
|
|
-- The Portal Battery Module
|
|
|
|
wwpEnvPortalBatteryModule OBJECT IDENTIFIER ::= { wwpEnviron 7 }
|
|
|
|
-- The Door Module
|
|
|
|
wwpEnvDoorModule OBJECT IDENTIFIER ::= { wwpEnviron 8 }
|
|
|
|
-- The Dry Contact Module
|
|
|
|
wwpEnvDryContactModule OBJECT IDENTIFIER ::= { wwpEnviron 9 }
|
|
|
|
-- The RF module
|
|
|
|
wwpEnvRFModule OBJECT IDENTIFIER ::= { wwpEnviron 10 }
|
|
|
|
-- Notifications
|
|
|
|
wwpEnvironMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpEnvironMIB 2 }
|
|
wwpEnvironMIBNotifications OBJECT IDENTIFIER ::=
|
|
{ wwpEnvironMIBNotificationPrefix 0 }
|
|
|
|
-- Conformance information
|
|
|
|
wwpEnvironMIBConformance OBJECT IDENTIFIER ::= { wwpEnvironMIB 3 }
|
|
wwpEnvironMIBCompliances OBJECT IDENTIFIER ::= { wwpEnvironMIBConformance 1 }
|
|
wwpEnvironMIBGroups OBJECT IDENTIFIER ::= { wwpEnvironMIBConformance 2 }
|
|
|
|
|
|
wwpEnvBattStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
presentAndWorking(1),
|
|
presentButNotWorking(2),
|
|
notPresent(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the battery hardware the device is configured
|
|
with. For Portals, the Management station should use the
|
|
new added object wwpEnvPortalCurrentBattStatus
|
|
for the batery status."
|
|
::= { wwpEnvBatteryModule 1 }
|
|
|
|
--
|
|
-- Power Module
|
|
--
|
|
wwpEnvPowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpEnvPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of power supply entries."
|
|
::= { wwpEnvPowerSupplyModule 1 }
|
|
|
|
wwpEnvPowerEntry OBJECT-TYPE
|
|
SYNTAX WwpEnvPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the powerTable providing objects for a
|
|
power supply."
|
|
INDEX { wwpEnvPowerSupplyNum }
|
|
::= { wwpEnvPowerTable 1 }
|
|
|
|
WwpEnvPowerEntry ::= SEQUENCE {
|
|
wwpEnvPowerSupplyNum Integer32,
|
|
wwpEnvPowerSupplyState INTEGER,
|
|
wwpEnvPowerSupplyType INTEGER,
|
|
wwpEnvPowerSupplyRedundancy INTEGER
|
|
}
|
|
|
|
wwpEnvPowerSupplyNum OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the power supply."
|
|
::= { wwpEnvPowerEntry 1 }
|
|
|
|
wwpEnvPowerSupplyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
infoNotAvailable(1),
|
|
notInstalled(2),
|
|
installedAndOperating(3),
|
|
installedAndNotOperating(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the power supply's state."
|
|
::= { wwpEnvPowerEntry 2 }
|
|
|
|
wwpEnvPowerSupplyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ac-dc(1),
|
|
dc-dc(2),
|
|
notSupported(3), -- Object is not supported
|
|
highOutput(4),
|
|
external(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the power supply type."
|
|
::= { wwpEnvPowerEntry 3 }
|
|
|
|
wwpEnvPowerSupplyRedundancy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
redundant(1),
|
|
notRedundant(2),
|
|
notSupported(3) -- Object is not supported
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether or not the power supply is redundant."
|
|
::= { wwpEnvPowerEntry 4 }
|
|
|
|
wwpEnvRedPowerSupplyNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpEnvRedPowerSupplyNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvPowerSupplyModule 2 }
|
|
|
|
--
|
|
-- The Fan module group
|
|
--
|
|
wwpEnvFanModuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpEnvFanModuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of fan module entries."
|
|
::= { wwpEnvFanModule 1 }
|
|
|
|
wwpEnvFanModuleEntry OBJECT-TYPE
|
|
SYNTAX WwpEnvFanModuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the fan module Table providing objects for a
|
|
fan module."
|
|
INDEX { wwpEnvFanModuleNum }
|
|
::= { wwpEnvFanModuleTable 1 }
|
|
|
|
WwpEnvFanModuleEntry ::= SEQUENCE {
|
|
wwpEnvFanModuleNum Integer32,
|
|
wwpEnvFanModuleState INTEGER,
|
|
wwpEnvFanAvgSpeed Integer32,
|
|
wwpEnvFanCurrentSpeed Integer32,
|
|
wwpEnvFanMinSpeed Integer32
|
|
}
|
|
|
|
wwpEnvFanModuleNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the Fan module."
|
|
::= { wwpEnvFanModuleEntry 1 }
|
|
|
|
wwpEnvFanModuleState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
infoNotAvailable(1),
|
|
notInstalled(2),
|
|
installedAndOperating(3),
|
|
installedAndNotOperating(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the fan modules state."
|
|
::= { wwpEnvFanModuleEntry 2 }
|
|
|
|
wwpEnvFanAvgSpeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
UNITS "rpm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fans average speed in RPM. The average is calculated
|
|
on a continuous basis from system startup."
|
|
::= { wwpEnvFanModuleEntry 3 }
|
|
|
|
wwpEnvFanCurrentSpeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
UNITS "rpm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current speed of the fan in RPM."
|
|
::= { wwpEnvFanModuleEntry 4 }
|
|
|
|
wwpEnvFanMinSpeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
UNITS "rpm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum speed of the fan in RPM."
|
|
::= { wwpEnvFanModuleEntry 5 }
|
|
|
|
|
|
wwpEnvFanModuleNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpEnvFanModuleNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvFanModule 2 }
|
|
|
|
--
|
|
-- The Temp module group
|
|
--
|
|
wwpEnvTempSensorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpEnvTempSensorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Temp Sensors entries."
|
|
::= { wwpEnvTempSensor 1 }
|
|
|
|
wwpEnvTempSensorEntry OBJECT-TYPE
|
|
SYNTAX WwpEnvTempSensorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Temp Sensor Table providing objects for a
|
|
Temp Sensor."
|
|
INDEX { wwpEnvTempSensorNum }
|
|
::= { wwpEnvTempSensorTable 1 }
|
|
|
|
WwpEnvTempSensorEntry ::= SEQUENCE {
|
|
wwpEnvTempSensorNum Integer32,
|
|
wwpEnvTempSensorValue Integer32,
|
|
wwpEnvTempSensorHighThreshold Integer32,
|
|
wwpEnvTempSensorLowThreshold Integer32,
|
|
wwpEnvTempSensorState INTEGER
|
|
}
|
|
|
|
wwpEnvTempSensorNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the Temp sensor module."
|
|
::= { wwpEnvTempSensorEntry 1 }
|
|
|
|
wwpEnvTempSensorValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "degrees Celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of temperature measured by the sensor
|
|
inside the device in degrees C."
|
|
::= { wwpEnvTempSensorEntry 2 }
|
|
|
|
wwpEnvTempSensorHighThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "degrees Celsius"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest value that the object wwpEnvTempSensorValue
|
|
may obtain at which a wwpEnvMIBTempNotification is sent."
|
|
::= { wwpEnvTempSensorEntry 3 }
|
|
|
|
wwpEnvTempSensorLowThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "degrees Celsius"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Lowest value that the object wwpEnvTempSensorValue
|
|
may obtain at which a wwpEnvMIBTempNotification is sent."
|
|
::= { wwpEnvTempSensorEntry 4 }
|
|
|
|
wwpEnvTempSensorState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
higherThanThreshold(0),
|
|
normal(1),
|
|
lowerThanThreshold(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state indicates whether the current temp is greater than,
|
|
equal to or less than the threshold state."
|
|
::= { wwpEnvTempSensorEntry 5 }
|
|
|
|
wwpEnvTempNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpEnvTempNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvTempSensor 2 }
|
|
|
|
--
|
|
-- The Port Power Management group
|
|
--
|
|
wwpPortPowerMgmtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpPortPowerMgmtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Port Power Management entries. This table affects
|
|
the port power only when the input power supply is Battery."
|
|
::= { wwpEnvPortPowerMgmt 1 }
|
|
|
|
wwpPortPowerMgmtEntry OBJECT-TYPE
|
|
SYNTAX WwpPortPowerMgmtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Port Power Mgmt Table providing objects for
|
|
Port Power Management."
|
|
INDEX { wwpEnvPortBankId }
|
|
::= { wwpPortPowerMgmtTable 1 }
|
|
|
|
WwpPortPowerMgmtEntry ::= SEQUENCE {
|
|
wwpEnvPortBankId Integer32,
|
|
wwpEnvPortMap PortList,
|
|
wwpEnvPortBankOn INTEGER
|
|
}
|
|
|
|
wwpEnvPortBankId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the Port Bank module. A Bank is a set of ports
|
|
for the power management when the source of the input
|
|
power is switched to battery."
|
|
::= { wwpPortPowerMgmtEntry 1 }
|
|
|
|
wwpEnvPortMap OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port map associated with this BankId."
|
|
::= { wwpPortPowerMgmtEntry 2 }
|
|
|
|
wwpEnvPortBankOn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to decide whether the port related to this Bank
|
|
should be on or not if the input power supply is switched
|
|
to Battery."
|
|
::= { wwpPortPowerMgmtEntry 3 }
|
|
|
|
--
|
|
-- notif group
|
|
--
|
|
wwpPowerSwitchingOp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
acToBattery(1),
|
|
bateryToAC(2)
|
|
}
|
|
--MAX-ACCESS accessible-for-notify
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to notify whether the input power supply is switching
|
|
from ac to Battery or vice versa."
|
|
::= { wwpEnvNotif 1 }
|
|
|
|
--
|
|
-- portal battery group
|
|
--
|
|
wwpEnvPortalBatteryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
present(1),
|
|
missing(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the current status of the
|
|
battery. If battery is connected then the
|
|
status is indicated as 'present'."
|
|
::= { wwpEnvPortalBatteryModule 1 }
|
|
|
|
wwpEnvPortalBatteryVoltageLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
low(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the current voltage level of the
|
|
battery."
|
|
::= { wwpEnvPortalBatteryModule 2 }
|
|
|
|
wwpEnvPortalBatteryCondition OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
good(1),
|
|
bad(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the current condition of the battery."
|
|
::= { wwpEnvPortalBatteryModule 3 }
|
|
|
|
wwpEnvPortalPowerSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primaryPower(1),
|
|
battery(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the current power source for the device."
|
|
::= { wwpEnvPortalBatteryModule 4 }
|
|
|
|
wwpEnvBatteryNormalStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the low state
|
|
of the battery."
|
|
::= { wwpEnvPortalBatteryModule 5 }
|
|
|
|
wwpEnvBatteryLowStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the normal state
|
|
of the battery."
|
|
::= { wwpEnvPortalBatteryModule 6 }
|
|
|
|
wwpEnvBatteryGoodStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the good state
|
|
of the battery."
|
|
::= { wwpEnvPortalBatteryModule 7 }
|
|
|
|
wwpEnvBatteryBadStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the bad state
|
|
of the battery."
|
|
::= { wwpEnvPortalBatteryModule 8 }
|
|
|
|
wwpEnvBatteryPresentStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the battery state
|
|
'present'."
|
|
::= { wwpEnvPortalBatteryModule 9 }
|
|
|
|
wwpEnvBatteryMissingStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the battery state
|
|
'missing'."
|
|
::= { wwpEnvPortalBatteryModule 10 }
|
|
|
|
wwpEnvBatteryPowerPrimaryStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the state when the
|
|
device is on primary power."
|
|
::= { wwpEnvPortalBatteryModule 11 }
|
|
|
|
wwpEnvBatteryPowerBatteryStateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the state when the
|
|
device is on battery power."
|
|
::= { wwpEnvPortalBatteryModule 12 }
|
|
|
|
|
|
|
|
wwpEnvBatteryLowStateNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
will generate the wwpEnvPortalBatteryStatusNotification
|
|
in case of battery state changing from normal to low
|
|
or vice versa.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvPortalBatteryModule 13 }
|
|
|
|
wwpEnvBatteryBadStateNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
will generate the wwpEnvPortalBatteryStatusNotification
|
|
in case of battery state changing from good to bad
|
|
or vice versa.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvPortalBatteryModule 14 }
|
|
|
|
wwpEnvBatteryMissingStateNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
will generate the wwpEnvPortalBatteryStatusNotification
|
|
in case of battery state changing from present to missing
|
|
or vice versa.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvPortalBatteryModule 15 }
|
|
|
|
wwpEnvBatteryPowerNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
will generate the wwpEnvPortalBatteryStatusNotification
|
|
in case of input power changing from primary to battery
|
|
or vice versa.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvPortalBatteryModule 16 }
|
|
|
|
wwpEnvBatteryPeriodicTrapsTimer OBJECT-TYPE
|
|
SYNTAX INTEGER(0..8760)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adjusts the amount of time, in hours, when the current
|
|
state of the battery is evaluated and status traps are
|
|
automatically issued. When set to zero (0) no periodic
|
|
evaluation of the battery is performed."
|
|
DEFVAL { 0 }
|
|
::= { wwpEnvPortalBatteryModule 17 }
|
|
|
|
wwpEnvBatteryPowerUpTrapsEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to true, upon portal power-up the state of
|
|
the battery is evaluated and status traps are issued.
|
|
When set to false, no portal power-up battery state
|
|
traps will be issued."
|
|
DEFVAL { false }
|
|
::= { wwpEnvPortalBatteryModule 18 }
|
|
|
|
--
|
|
-- door group
|
|
--
|
|
wwpEnvDoorState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open(1),
|
|
close(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the door."
|
|
::= { wwpEnvDoorModule 1 }
|
|
|
|
wwpEnvDoorNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpEnvDoorStateChgNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvDoorModule 2 }
|
|
|
|
--
|
|
-- dry contact group
|
|
--
|
|
wwpEnvDryContactOpenStateName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the open state
|
|
of the dry contact."
|
|
::= { wwpEnvDryContactModule 1 }
|
|
|
|
wwpEnvDryContactOpenStateChgAccumulate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'enable' will cause the
|
|
system to accumulate open state changes."
|
|
::= { wwpEnvDryContactModule 2 }
|
|
|
|
wwpEnvDryContactOpenStateCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the dry contact has
|
|
entered the open state."
|
|
::= { wwpEnvDryContactModule 3 }
|
|
|
|
wwpEnvDryContactOpenStateNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpEnvDryContactOpenStateNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvDryContactModule 4 }
|
|
|
|
wwpEnvDryContactCloseStateName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state name associated with the close state
|
|
of the dry contact."
|
|
::= { wwpEnvDryContactModule 5 }
|
|
|
|
wwpEnvDryContactCloseStateChgAccumulate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'enable' will cause the
|
|
system to accumulate close state changes."
|
|
::= { wwpEnvDryContactModule 6 }
|
|
|
|
wwpEnvDryContactCloseStateCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the dry contact has
|
|
entered the close state."
|
|
::= { wwpEnvDryContactModule 7 }
|
|
|
|
wwpEnvDryContactCloseStateNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpEnvDryContactCloseStateNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpEnvDryContactModule 8 }
|
|
|
|
--
|
|
-- RF module
|
|
--
|
|
wwpEnvRFModuleState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'enable' will set the
|
|
the RF state to 'enable'."
|
|
::= { wwpEnvRFModule 1 }
|
|
|
|
wwpEnvRFModuleSignalDetect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of signal detect by the RF Module."
|
|
::= { wwpEnvRFModule 2 }
|
|
|
|
wwpEnvPowerSupplyStatusNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvPowerSupplyNum,
|
|
wwpEnvPowerSupplyState,
|
|
wwpEnvPowerSupplyType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvPowerSupplyStatusNotification is sent if a
|
|
power supply state is changed."
|
|
::= { wwpEnvironMIBNotifications 1 }
|
|
|
|
wwpEnvFanModuleNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvFanModuleNum,
|
|
wwpEnvFanModuleState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvFanModuleNotification is sent if the
|
|
fan state changes."
|
|
::= { wwpEnvironMIBNotifications 2 }
|
|
|
|
wwpEnvTempNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvTempSensorState,
|
|
wwpEnvTempSensorValue,
|
|
wwpEnvTempSensorHighThreshold,
|
|
wwpEnvTempSensorLowThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvTempNotification is sent if the
|
|
wwpEnvTempSensorState is changed."
|
|
::= { wwpEnvironMIBNotifications 3 }
|
|
|
|
wwpEnvPowerSwitchNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpPowerSwitchingOp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvPowerSwitchNotification is sent if the
|
|
input power supply is switched to Battery from the
|
|
AC power or switched from the Battery to the AC Power."
|
|
::= { wwpEnvironMIBNotifications 4 }
|
|
|
|
wwpEnvPortalBatteryStatusNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvPortalBatteryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvPortalBatteryStatusNotification is sent if the
|
|
Battery status changes. If the device supports the
|
|
configurable battery state names, then the corresponding
|
|
battery state name should also be sent with this notification."
|
|
::= { wwpEnvironMIBNotifications 5 }
|
|
|
|
wwpEnvPortalBatteryVoltageLevelNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvPortalBatteryVoltageLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvPortalBatteryVoltageLevelNotification is sent if the
|
|
Battery voltage level changes from normal to low or vice versa.
|
|
If the device supports the configurable battery state names, then
|
|
the corresponding battery state name should also be sent with
|
|
this notification."
|
|
::= { wwpEnvironMIBNotifications 6 }
|
|
|
|
wwpEnvPortalBatteryConditionNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvPortalBatteryCondition
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvPortalBatteryConditionNotification is sent if the
|
|
Battery condition changes from good to bad or vice versa.
|
|
If the device supports the configurable battery state names, then
|
|
the corresponding battery state name should also be sent with
|
|
this notification."
|
|
::= { wwpEnvironMIBNotifications 7 }
|
|
|
|
wwpEnvPortalPowerSourceNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvPortalPowerSource
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvPortalPowerSourceNotification is sent if the
|
|
Battery input power source changes from battery to primary
|
|
power or vice versa. A device which supports
|
|
wwpEnvPowerSwitchNotification should not support this
|
|
notification. If the device supports the configurable
|
|
battery state names, then the corresponding battery state
|
|
name should also be sent with this notification."
|
|
::= { wwpEnvironMIBNotifications 8 }
|
|
|
|
wwpEnvDoorStateChgNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvDoorState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvDoorStateChgNotification is sent if the
|
|
door state changes."
|
|
::= { wwpEnvironMIBNotifications 9 }
|
|
|
|
wwpEnvDryContactOpenStateNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvDryContactOpenStateName,
|
|
wwpEnvDryContactOpenStateCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvDryContactOpenStateNotification is sent when the
|
|
dry contact enters in the open state."
|
|
::= { wwpEnvironMIBNotifications 10 }
|
|
|
|
wwpEnvDryContactCloseStateNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpEnvDryContactCloseStateName,
|
|
wwpEnvDryContactCloseStateCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpEnvDryContactCloseStateNotification is sent when the
|
|
dry contact enters in the close state."
|
|
::= { wwpEnvironMIBNotifications 11 }
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- WWP-ENVIRON-MIB
|
|
--
|
|
|
|
|