Observium_CE/mibs/cabletron/CTRON-Q-BRIDGE-MIB-EXT

845 lines
30 KiB
Plaintext

CTRON-Q-BRIDGE-MIB-EXT DEFINITIONS ::= BEGIN
-- ctron-q-bridge-mib-ext.txt
--
-- This module provides authoritative definitions for Cabletron's
-- CTRON-Q-BRIDGE-MIB-EXT.
--
-- This module will be extended, as needed.
--
-- Enterasys Networks reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Enterasys and Cabletron products.
--
-- Copyright April 2001 Cabletron Systems
-- Copyright 2002-2012 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
dot1dBasePortEntry, dot1dBasePort
FROM BRIDGE-MIB
EnabledStatus
FROM P-BRIDGE-MIB
VlanIndex, dot1qVlanCurrentEntry, PortList, dot1qVlanIndex,
dot1qFdbId, dot1qTpFdbAddress
FROM Q-BRIDGE-MIB
ctVlanExt
FROM CTRON-MIB-NAMES;
ctQBridgeMibExt MODULE-IDENTITY
LAST-UPDATED "201202141442Z" -- Tue Feb 14 14:42 UTC 2012
ORGANIZATION "Enterasys Networks, Inc."
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"This MIB module defines a portion of the SNMP enterprise
MIBs under the Cabletron enterprise OID pertaining to
the configuration of switches that support IEEE 802.1Q
[802.1Q] and the Q-BRIDGE-MIB [RFC2674]."
REVISION "201202141442Z" -- Tue Feb 14 14:42 UTC 2012
DESCRIPTION "Added the mvrp(8) enumeration to the
ctDot1qPortVlanEgressStatus object."
REVISION "201201091349Z" -- Mon Jan 9 13:49 UTC 2012
DESCRIPTION "Added the ctDot1qPortVlanStaticEgressTable to show
egress information for static VLANs regardless of
forwarding status."
REVISION "201006301825Z" -- Wed Jun 30 18:25 UTC 2010
DESCRIPTION "Added the ctDot1qVlanGvrpRestrictedTable to allow
GVRP participation to be controlled on a per VLAN
basis."
REVISION "200702161744Z" -- Fri Feb 16 17:44 UTC 2007
DESCRIPTION "Added the rfc3580VlanTunnelAttribute enumeration
to the ctDot1qPortVlanEgressStatus leaf."
REVISION "200501211717Z" -- Fri Jan 21 17:17 GMT 2005
DESCRIPTION "Added the ctDot1qTpFdbExtTable to allow a mechanism
for removing learned(3) entries from the filter
database."
REVISION "200406041241Z" -- Fri Jun 4 12:41 GMT 2004
DESCRIPTION "Added the ctDot1qPortVlanEgressTable to represent egress
information on a per port basis."
REVISION "200312152053Z" -- Mon Dec 15 20:53 GMT 2003
DESCRIPTION "Added ctDot1qPortReplaceTCI to allow the optional
replacement of the original Tag Control Information
(TCI) in an 802.1Q tagged frame."
REVISION "200207262045Z" -- Fri Jul 26 20:45 GMT 2002
DESCRIPTION "Changed the description of
ctDot1qVlanForbidEgressPorts."
REVISION "200207191412Z" -- Fri Jul 19 14:12 GMT 2002
DESCRIPTION "Added the ctDot1qVlanCurrentExtTable.
Changed CONTACT-INFO clause to Enterasys Networks."
REVISION "200104161816Z"
DESCRIPTION "Minor grammatical changes."
REVISION "200101101329Z"
DESCRIPTION "Added the ctDot1qPortDiscardTagged leaf for additional
backwards compatibility with the now obsolete
CTRON-VLAN-EXTENSIONS-MIB. Fixed the INDEX clause of
the ctDot1qVlanDynamicEgressEntry. Added the new
ctQBridgePortGroup2 OBJECT-GROUP and ctDot1qVlan2
MODULE-COMPLIANCE. Deprecated the ctQBridgePortGroup
OBJECT-GROUP and ctDot1qVlan MODULE-COMPLIANCE."
REVISION "199910060812Z"
DESCRIPTION "The initial version of this MIB module published as
01.00.00."
::= { ctVlanExt 7 }
-- branches used in this MIB
ctQBridgeMIBObjects OBJECT IDENTIFIER ::= { ctQBridgeMibExt 1 }
-- -------------------------------------------------------------
-- The VLAN Port Extension Configuration Table
-- -------------------------------------------------------------
ctDot1qPortVlanExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port control and status information
for Cabletron proprietary extensions pertaining to VLAN
configuration in the device."
::= { ctQBridgeMIBObjects 1 }
ctDot1qPortVlanEntry OBJECT-TYPE
SYNTAX CtDot1qPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling proprietary VLAN configuration for
a port on the device. This is indexed by dot1dBasePort."
AUGMENTS { dot1dBasePortEntry }
::= { ctDot1qPortVlanExtTable 1 }
CtDot1qPortVlanEntry ::=
SEQUENCE {
ctDot1qPortDefaultForwardMode
INTEGER,
ctDot1qPortDiscardTagged
EnabledStatus,
ctDot1qPortReplaceTCI
EnabledStatus
}
ctDot1qPortDefaultForwardMode OBJECT-TYPE
SYNTAX INTEGER {
forwardNoFrames(1),
forwardAllFramesAsTagged(2),
forwardAllFramesAsUntagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method used to forward frames belonging to VLANs that
do not have an entry in the dot1qVlanCurrentTable.
When this is forwardNoFrames(1), the device will not forward
traffic out this port, for any VLAN that does not have an
entry in the dot1qVlanCurrentTable.
When this is forwardAllFramesAsTagged(2), the device will
forward all traffic out this port, with an 802.1Q VLAN tag,
for any VLAN that does not have an entry in
dot1qVlanCurrentTable.
When this is forwardAllFramesAsUntagged(3), the device will
forward all traffic out this port, without an 802.1Q VLAN tag,
for any VLAN that does not have an entry in
dot1qVlanCurrentTable.
This control does not affect VLAN independent BPDU frames,
such as GVRP and STP. It does affect VLAN dependent BPDU
frames, such as GMRP."
DEFVAL { forwardNoFrames }
::= { ctDot1qPortVlanEntry 1 }
ctDot1qPortDiscardTagged OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method used to discard all incoming VLAN tagged frames
for the port specified by the indexing of this entry.
When this is enabled(1), the device will discard all 802.1Q
tagged packets received on this port.
When this is disabled(2), the device will NOT discard frames
received on this port based on the presence of an 802.1Q tag.
The behavior of this method in conjunction with the
dot1qPortAcceptableFrameTypes leaf of Q-BRIDGE-MIB [RFC2674]
is that of a logical OR."
DEFVAL { disabled }
::= { ctDot1qPortVlanEntry 2 }
ctDot1qPortReplaceTCI OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method used to replace the Tag Control Information (TCI)
field in all VLAN tagged frames received on the port specified
by the indexing of this entry.
When this is enabled(1), the device will replace the 802.1Q
TCI field with results of the INGRESS stage of frame forwarding.
Logically, this happens immediately prior to the PROGRESS stage
of frame relay.
When this is disabled(2), the device operates in compliance with
the IEEE 802.1Q standard and honors the TCI field of incident
frames."
REFERENCE
"IEEE Std. 802.1Q-1998: Section 9.3.2"
DEFVAL { disabled }
::= { ctDot1qPortVlanEntry 3 }
-- -------------------------------------------------------------
-- The Cabletron Dynamic Egress Configuration Table
-- -------------------------------------------------------------
ctDot1qVlanDynamicEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qVlanDynamicEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per VLAN control and status
information for Cabletron proprietary egress extensions for
VLAN configuration in the device."
::= { ctQBridgeMIBObjects 2 }
ctDot1qVlanDynamicEgressEntry OBJECT-TYPE
SYNTAX CtDot1qVlanDynamicEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling proprietary VLAN configuration
for a device."
INDEX { ctDot1qVlanDynamicEgressIndex }
::= { ctDot1qVlanDynamicEgressTable 1 }
CtDot1qVlanDynamicEgressEntry ::=
SEQUENCE {
ctDot1qVlanDynamicEgressIndex
VlanIndex,
ctDot1qVlanDynamicEgressStatus
EnabledStatus
}
ctDot1qVlanDynamicEgressIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN to which this entries' dynamic egress status
applies."
::= { ctDot1qVlanDynamicEgressEntry 1 }
ctDot1qVlanDynamicEgressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of Dynamic Egress operation on this VLAN. The
value enabled(1) indicates that Dynamic Egress is enabled on
this VLAN. If Dynamic Egress is enabled for a VLAN the
following rules are applied to received frames:
1. If the frame is untagged, and
2. The frame is successfully classified to the specified
VLAN, and
3. The port the frame was received on is not configured in
dot1qVlanCurrentEgressPorts, dot1qVlanCurrentUntaggedPorts,
or dot1qVlanForbiddenEgressPorts, for the classified VLAN,
and
4. The port is configured for forwardNoFrames(1) in
ctDot1qPortDefaultForwardMode (if supported), then
5. The port the frame was received on will be added to
the dot1qVlanCurrentEgressPorts and
dot1qVlanCurrentUntaggedPorts for the classified VLAN.
If the VLAN was not preexisting the dot1qVlanStatus
leaf for the VLAN will return other(1)."
DEFVAL { disabled }
::= { ctDot1qVlanDynamicEgressEntry 2 }
-- -------------------------------------------------------------
-- The VLAN Current Table Extension.
-- -------------------------------------------------------------
ctDot1qVlanCurrentExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qVlanCurrentExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management or created dynamically created.
This table provides proprietary extensions to
dot1qVlanCurrentTable as defined in RFC2674."
::= { ctQBridgeMIBObjects 3 }
ctDot1qVlanCurrentEntryExt OBJECT-TYPE
SYNTAX CtDot1qVlanCurrentExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a VLAN configured into the device by
(local or network) management or created dynamically."
AUGMENTS { dot1qVlanCurrentEntry }
::= { ctDot1qVlanCurrentExtTable 1 }
CtDot1qVlanCurrentExtEntry ::=
SEQUENCE {
ctDot1qVlanForbidEgressPorts
PortList
}
ctDot1qVlanForbidEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current set of ports which are prohibited from being
included in the egress list for this VLAN. This object is a
logical combination of dot1qVlanForbiddenEgressPorts and zero
or more proprietary methods of forbidding egress on a per port
per VLAN basis."
::= { ctDot1qVlanCurrentEntryExt 1 }
-- -------------------------------------------------------------
-- The VLAN Port Egress Information Configuration Table
-- -------------------------------------------------------------
ctDot1qPortVlanEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qPortVlanEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per VLAN egress information.
This table represents information contained in the
dot1qVlanCurrentTable, but indexed by port instead of by VLAN.
Only ports that a given VLAN is actively egressing are
represented in this table."
::= { ctQBridgeMIBObjects 4 }
ctDot1qPortVlanEgressEntry OBJECT-TYPE
SYNTAX CtDot1qPortVlanEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information related to egress on a per port, per VLAN basis.
The entry also represents the method that caused the port
to have egress."
INDEX { dot1dBasePort, dot1qVlanIndex }
::= { ctDot1qPortVlanEgressTable 1 }
CtDot1qPortVlanEgressEntry ::=
SEQUENCE {
ctDot1qPortVlanEgressStatus
INTEGER,
ctDot1qPortVlanEgressType
INTEGER
}
ctDot1qPortVlanEgressStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
static(2),
gvrp(3),
ctDynamicEgress(4),
etsysPolicyProfile(5),
ctPortDefFwdMode(6),
rfc3580VlanTunnelAttribute(7),
mvrp(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the method that is causing the VLAN to
egress on this port.
other(1) - The VLAN is currently egressing on this port but
the conditions under which it will remain so differ
from the following values.
static(2) - The VLAN is currently egressing on this port
as a result of static configuration in the
dot1qVlanStaticTable.
gvrp(3) - The VLAN is currently egressing on this port
as a result of GVRP.
ctDynamicEgress(4) - The VLAN is currently egressing on this
port as a result of ctDyanmicEgress. This feature
is controlled by the ctDot1qVlanDynamicEgressStatus
object.
etsysPolicyProfile(5) - The VLAN is currently egressing on
this port as a result of policy configuration in the
ENTERASYS-POLICY-PROFILE-MIB.
ctPortDefFwdMode(6) - The VLAN is currently egressing on
this port as a result of explicit configuration of the
ctDot1qPortDefaultForwardMode object for this port.
rfc3580VlanTunnelAttribute(7) - The VLAN is currently
egressing on this port as a result of a specified
RFC3580 VLAN Tunnel Attribute.
mvrp(8) - The VLAN is currently egressing on this port
as a result of MVRP."
::= { ctDot1qPortVlanEgressEntry 1 }
ctDot1qPortVlanEgressType OBJECT-TYPE
SYNTAX INTEGER {
tagged(1),
untagged(2),
forbidden(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of egress the VLAN has on this
port.
tagged(1) - Frames for the specified VLAN egressing this port
have an 802.1Q tag.
untagged(2) - Frames for the specified VLAN egressing this port
do not have an 802.1Q tag.
forbidden(3) - Frames for the specified VLAN are not allowed
to egress this port under any circumstances."
::= { ctDot1qPortVlanEgressEntry 2 }
-- -------------------------------------------------------------
-- The 802.1Q Transparent Filter Database Extension Table
-- -------------------------------------------------------------
ctDot1qTpFdbExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qTpFdbExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that extends the functionality provided by the
dot1qTpFdbTable of Q-BRIDGE-MIB. Only unicast
MAC addresses with a dot1qTpFdbStatus of learned(3)
will appear in this table."
REFERENCE
"RFC 2674, 'Definitions of Managed Objects for Bridges with
Traffic Classes, Multicast Filtering and Virtual LAN
Extensions'"
::= { ctQBridgeMIBObjects 5 }
ctDot1qTpFdbExtEntry OBJECT-TYPE
SYNTAX CtDot1qTpFdbExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information."
INDEX { dot1qFdbId, dot1qTpFdbAddress }
::= { ctDot1qTpFdbExtTable 1 }
CtDot1qTpFdbExtEntry ::=
SEQUENCE {
ctDot1qTpFdbRemoveAddress
TruthValue
}
ctDot1qTpFdbRemoveAddress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is object is set to true(1) the unicast MAC
address specified by the indexing will be removed from
transparent filter database. A set to false(2) will
have no effect. This object will always return false(2)."
DEFVAL { false }
::= { ctDot1qTpFdbExtEntry 1 }
-- -------------------------------------------------------------
-- The Cabletron GVRP VLAN Restriction Configuration Table
-- -------------------------------------------------------------
ctDot1qVlanGvrpRestrictedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qVlanGvrpRestrictedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per VLAN control and status
information for GVRP VLAN configuration in the device."
::= { ctQBridgeMIBObjects 6 }
ctDot1qVlanGvrpRestrictedEntry OBJECT-TYPE
SYNTAX CtDot1qVlanGvrpRestrictedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling proprietary VLAN configuration
for GVRP on a device."
INDEX { ctDot1qVlanGvrpRestrictedIndex }
::= { ctDot1qVlanGvrpRestrictedTable 1 }
CtDot1qVlanGvrpRestrictedEntry ::=
SEQUENCE {
ctDot1qVlanGvrpRestrictedIndex
VlanIndex,
ctDot1qVlanGvrpRestrictedStatus
EnabledStatus
}
ctDot1qVlanGvrpRestrictedIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN to which this entry's restricted GVRP status
applies."
::= { ctDot1qVlanGvrpRestrictedEntry 1 }
ctDot1qVlanGvrpRestrictedStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of restricted GVRP operation for this VLAN. The
value enabled(1) indicates that restricted GVRP operation is
enabled for this VLAN. This object affects GVRP Applicant
and Registrar state machines for this VLAN on all ports.
If restricted GVRP is enabled for a VLAN the following rules
are applied:
1. If GVRP is globally enabled and
2. If GVRP is enabled at the port level, then
3. Any ports that were members of the dot1qVlanCurrentEgressPorts
table due to GVRP will signal to remove this registration and no
further registration requests received in GVRP PDUs for this
VLAN will be processed and
4. Any ports that were propagating registration information for
this VLAN will cease propagation and all further GVRP PDUs
transmitted after the initial withdrawal attempt will not
include event notifications for this VLAN."
DEFVAL { disabled }
::= { ctDot1qVlanGvrpRestrictedEntry 2 }
-- -------------------------------------------------------------
-- The Static VLAN Port Egress Information Configuration Table
-- -------------------------------------------------------------
ctDot1qPortVlanStaticEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDot1qPortVlanStaticEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per VLAN egress information.
This table represents information contained in the
dot1qVlanStaticTable, but indexed by port instead of by VLAN.
Only ports configured to static VLANs are represented in this table."
::= { ctQBridgeMIBObjects 7 }
ctDot1qPortVlanStaticEgressEntry OBJECT-TYPE
SYNTAX CtDot1qPortVlanStaticEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information related to egress on a per port, per VLAN basis.
Only statically configured VLANs are shown."
INDEX { dot1dBasePort, dot1qVlanIndex }
::= { ctDot1qPortVlanStaticEgressTable 1 }
CtDot1qPortVlanStaticEgressEntry ::=
SEQUENCE {
ctDot1qPortVlanStaticEgressType
INTEGER
}
ctDot1qPortVlanStaticEgressType OBJECT-TYPE
SYNTAX INTEGER {
tagged(1),
untagged(2),
forbidden(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of egress the statically configured
VLAN has on this port.
tagged(1) - Frames for the specified VLAN egressing this port
have an 802.1Q tag.
untagged(2) - Frames for the specified VLAN egressing this port
do not have an 802.1Q tag.
forbidden(3) - Frames for the specified VLAN are not allowed
to egress this port under any circumstances."
::= { ctDot1qPortVlanStaticEgressEntry 1 }
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------
ctQBridgeConformance OBJECT IDENTIFIER ::= { ctQBridgeMibExt 2 }
ctQBridgeGroups OBJECT IDENTIFIER ::= { ctQBridgeConformance 1 }
ctQBridgeCompliances OBJECT IDENTIFIER ::= { ctQBridgeConformance 2 }
-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------
ctQBridgePortGroup OBJECT-GROUP
OBJECTS { ctDot1qPortDefaultForwardMode }
STATUS deprecated
DESCRIPTION
"********* THIS GROUP IS DEPRECATED **********
A collection of objects providing port level control
over the forwarding behavior of frames classified to
unconfigured VLANs."
::= { ctQBridgeGroups 1 }
ctQBridgeVlanGroup OBJECT-GROUP
OBJECTS { ctDot1qVlanDynamicEgressStatus }
STATUS current
DESCRIPTION
"A collection of objects providing device level control
over the addition and deletion of unconfigured ports to
the egress lists of VLANs."
::= { ctQBridgeGroups 2 }
ctQBridgePortGroup2 OBJECT-GROUP
OBJECTS {
ctDot1qPortDefaultForwardMode,
ctDot1qPortDiscardTagged
}
STATUS current
DESCRIPTION
"A collection of objects providing port level control
over the ingress and egress of frames received by the device."
::= { ctQBridgeGroups 3 }
ctQBridgeVlanCurrentForbidGroup OBJECT-GROUP
OBJECTS { ctDot1qVlanForbidEgressPorts }
STATUS current
DESCRIPTION
"A collection of objects providing read-only current operational
information pertaining to forbidden egress on a per VLAN basis."
::= { ctQBridgeGroups 4 }
ctQBridgePortReplaceTCIGroup OBJECT-GROUP
OBJECTS {
ctDot1qPortReplaceTCI
}
STATUS current
DESCRIPTION
"An object providing port level control TCI replacement."
::= { ctQBridgeGroups 5 }
ctQBridgePortVlanEgressGroup OBJECT-GROUP
OBJECTS {
ctDot1qPortVlanEgressStatus,
ctDot1qPortVlanEgressType
}
STATUS deprecated
DESCRIPTION
"********* THIS GROUP IS DEPRECATED **********
Objects providing per port, per VLAN egress information."
::= { ctQBridgeGroups 6 }
ctQBridgeTpFdbTableExtGroup OBJECT-GROUP
OBJECTS {
ctDot1qTpFdbRemoveAddress
}
STATUS current
DESCRIPTION
"Objects providing per 802.1Q unicast MAC address configuration."
::= { ctQBridgeGroups 7 }
ctQBridgeVlanGvrpGroup OBJECT-GROUP
OBJECTS { ctDot1qVlanGvrpRestrictedStatus }
STATUS current
DESCRIPTION
"A collection of objects providing device level control over
the ability of GVRP to add and remove unconfigured ports to
the egress list of particular VLANs."
::= { ctQBridgeGroups 8 }
ctQBridgePortVlanEgressGroup2 OBJECT-GROUP
OBJECTS {
ctDot1qPortVlanEgressStatus,
ctDot1qPortVlanEgressType,
ctDot1qPortVlanStaticEgressType
}
STATUS current
DESCRIPTION
"Objects providing per port, per VLAN egress information."
::= { ctQBridgeGroups 9 }
-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------
ctDot1qVlan MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"******** THIS COMPLIANCE IS DEPRECATED ********
The compliance statement for devices that support
Cabletron extensions to Q-BRIDGE-MIB."
MODULE
MANDATORY-GROUPS {
ctQBridgePortGroup,
ctQBridgeVlanGroup
}
::= { ctQBridgeCompliances 1 }
ctDot1qVlan2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"******** THIS COMPLIANCE IS DEPRECATED ********
The compliance statement for devices that support
Cabletron extensions to Q-BRIDGE-MIB."
MODULE
MANDATORY-GROUPS {
ctQBridgeVlanGroup,
ctQBridgePortGroup2
}
GROUP ctQBridgePortReplaceTCIGroup
DESCRIPTION
"This group is REQUIRED for devices supporting TCI
replacement."
::= { ctQBridgeCompliances 2 }
ctDot1qVlanCurentCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
Cabletron extensions to the dot1qVlanCurrentTable of
the Q-BRIDGE-MIB."
MODULE
GROUP ctQBridgeVlanCurrentForbidGroup
DESCRIPTION
"This group is mandatory for all devices that support a
mechanism of configuring forbidden egress beyond the
capabilities provided by dot1qVlanForbiddenEgressPorts."
::= { ctQBridgeCompliances 3 }
ctDot1qPortVlanEgressCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"******** THIS COMPLIANCE IS DEPRECATED ********
The compliance statement for devices that support
reporting of VLAN egress on a per port, per VLAN basis."
MODULE
GROUP ctQBridgePortVlanEgressGroup
DESCRIPTION
"This group is mandatory for all devices that support a
mechanism of configuring egress beyond the
capabilities provided by Q-BRIDGE-MIB."
::= { ctQBridgeCompliances 4 }
ctDot1qTpFdbTableExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
extensions to the dot1qTpFdbTable of Q-BRIDGE-MIB."
MODULE
GROUP ctQBridgeTpFdbTableExtGroup
DESCRIPTION
"This group is mandatory for all devices that support a
mechanism of removing learned unicast MAC addresses from the
transparent filter database."
::= { ctQBridgeCompliances 5 }
ctDot1qVlan3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
Cabletron extensions to Q-BRIDGE-MIB."
MODULE
MANDATORY-GROUPS {
ctQBridgeVlanGroup,
ctQBridgePortGroup2
}
GROUP ctQBridgePortReplaceTCIGroup
DESCRIPTION
"This group is REQUIRED for devices supporting TCI
replacement."
GROUP ctQBridgeVlanGvrpGroup
DESCRIPTION
"This group is REQUIRED for devices that support the ability
to include or exclude individual VLANs from participating in
GVRP."
::= { ctQBridgeCompliances 6 }
ctDot1qPortVlanEgressCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
reporting of VLAN egress on a per port, per VLAN basis."
MODULE
GROUP ctQBridgePortVlanEgressGroup2
DESCRIPTION
"This group is mandatory for all devices that support a
mechanism of configuring egress beyond the
capabilities provided by Q-BRIDGE-MIB."
::= { ctQBridgeCompliances 7 }
END