547 lines
21 KiB
Plaintext
547 lines
21 KiB
Plaintext
FOUNDRY-DHCPSERVER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, IpAddress, Integer32,
|
|
TimeTicks, Counter32
|
|
FROM SNMPv2-SMI
|
|
snSwitch
|
|
FROM FOUNDRY-SN-SWITCH-GROUP-MIB
|
|
RowStatus, MacAddress
|
|
FROM SNMPv2-TC;
|
|
|
|
snDhcpServer MODULE-IDENTITY
|
|
LAST-UPDATED "201808070000Z" -- Aug 7, 2018
|
|
ORGANIZATION "Ruckus Wireless, Inc."
|
|
CONTACT-INFO
|
|
"
|
|
Technical Support Center, Ruckus Wireless, Inc,
|
|
350 West Java Drive,
|
|
Sunnyvale, CA 94089, USA
|
|
Support URL: https://support.ruckuswireless.com
|
|
Phone: +1-855-782-5871
|
|
ROW TF Numbers: https://support.ruckuswireless.com/contact-us"
|
|
DESCRIPTION
|
|
"
|
|
Copyright 1996-2017 Ruckus Wireless, Inc..
|
|
All rights reserved.
|
|
This Ruckus Wireless, Inc SNMP Management Information Base Specification
|
|
embodies Ruckus Wireless, Inc' confidential and proprietary
|
|
intellectual property. Ruckus Wireless, Inc retains all
|
|
title and ownership in the Specification, including any
|
|
revisions.
|
|
|
|
This Specification is supplied AS IS, and Ruckus Wireless, Inc makes
|
|
no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the Specification.
|
|
"
|
|
REVISION "201808070000Z" -- Aug 7, 2018
|
|
DESCRIPTION
|
|
"convert from SMIv1 to SMIv2"
|
|
REVISION "201808070000Z" -- Aug 7, 2018
|
|
DESCRIPTION
|
|
"Initial Version"
|
|
::= { snSwitch 42 }
|
|
|
|
--
|
|
-- Define the DHCP Server Tables.
|
|
--
|
|
snDhcpServerGlobalObjects OBJECT IDENTIFIER ::= { snDhcpServer 1 }
|
|
snDhcpServerTableObjects OBJECT IDENTIFIER ::= { snDhcpServer 2 }
|
|
|
|
-- =================================================================
|
|
-- DHCPv4 Server Global Scalar Object Section
|
|
-- =================================================================
|
|
|
|
snDhcpServerGlobalConfigState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure state for DHCPv4 server on the global level.
|
|
enabled: DHCPv4 server is enabled
|
|
disabled: DHCPv4 server is disabled
|
|
Note: DHCPv4 client should be disabled when enabling DHCPv4 server"
|
|
::= { snDhcpServerGlobalObjects 1}
|
|
|
|
|
|
-- =================================================================
|
|
-- 1st Table of DHCPServerTables: DHCPSrvGlobalPoolConfigTable
|
|
-- =================================================================
|
|
snDhcpServerPoolConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnDhcpServerPoolConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the configurations of dhcp
|
|
server global pools."
|
|
::= { snDhcpServerTableObjects 1 }
|
|
|
|
snDhcpServerPoolConfigEntry OBJECT-TYPE
|
|
SYNTAX SnDhcpServerPoolConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the objects for configuring
|
|
the network ip or host ip etc. to global pools for
|
|
DHCP server."
|
|
INDEX { snDhcpServerPoolName }
|
|
::= { snDhcpServerPoolConfigTable 1 }
|
|
|
|
SnDhcpServerPoolConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
snDhcpServerPoolName OCTET STRING,
|
|
snDhcpServerPoolNetwork IpAddress,
|
|
snDhcpServerPoolNetworkMask IpAddress,
|
|
snDhcpServerPoolStartAddr IpAddress,
|
|
snDhcpServerPoolEndAddr IpAddress,
|
|
snDhcpServerPoolLeaseDay Integer32,
|
|
snDhcpServerPoolLeaseHour Integer32,
|
|
snDhcpServerPoolLeaseMinute Integer32,
|
|
snDhcpServerPoolDeploy INTEGER,
|
|
snDhcpServerPoolRowStatus INTEGER
|
|
}
|
|
|
|
snDhcpServerPoolName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP server global pool name."
|
|
::= { snDhcpServerPoolConfigEntry 1 }
|
|
|
|
snDhcpServerPoolNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network ip of a DHCP global pool."
|
|
::= { snDhcpServerPoolConfigEntry 2 }
|
|
|
|
snDhcpServerPoolNetworkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Net mask of a DHCP global pool(network)."
|
|
::= { snDhcpServerPoolConfigEntry 3 }
|
|
|
|
snDhcpServerPoolStartAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start IP of a DHCP global pool."
|
|
::= { snDhcpServerPoolConfigEntry 4 }
|
|
|
|
snDhcpServerPoolEndAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End ip of a DHCP global pool."
|
|
::= { snDhcpServerPoolConfigEntry 5 }
|
|
|
|
snDhcpServerPoolLeaseDay OBJECT-TYPE
|
|
SYNTAX Integer32(0..365)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of days of the lease."
|
|
DEFVAL { 1 }
|
|
::= { snDhcpServerPoolConfigEntry 6 }
|
|
|
|
snDhcpServerPoolLeaseHour OBJECT-TYPE
|
|
SYNTAX Integer32(0..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of hours of the lease."
|
|
DEFVAL { 0 }
|
|
::= { snDhcpServerPoolConfigEntry 7 }
|
|
|
|
snDhcpServerPoolLeaseMinute OBJECT-TYPE
|
|
SYNTAX Integer32(0..59)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of minutes of the lease."
|
|
DEFVAL { 0 }
|
|
::= { snDhcpServerPoolConfigEntry 8 }
|
|
|
|
snDhcpServerPoolDeploy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nodeploy(0),
|
|
deploy(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag of undo operation for DHCPSrvGlobalPoolConfigTable."
|
|
::= { snDhcpServerPoolConfigEntry 9 }
|
|
|
|
snDhcpServerPoolRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snDhcpServerPoolConfigEntry 10 }
|
|
|
|
-- =================================================================
|
|
-- 2nd Table of DHCPServerTables: DHCPSrvGlobalPoolOptionTable
|
|
-- =================================================================
|
|
snDhcpServerPoolOptionConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnDhcpServerPoolOptionConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring options to DHCP global pools."
|
|
::= { snDhcpServerTableObjects 2 }
|
|
|
|
snDhcpServerPoolOptionConfigEntry OBJECT-TYPE
|
|
SYNTAX SnDhcpServerPoolOptionConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the objects for configuring
|
|
options to DHCP global pools."
|
|
INDEX { snDhcpServerPoolName, snDhcpServerPoolOptionCode }
|
|
::= { snDhcpServerPoolOptionConfigTable 1 }
|
|
|
|
SnDhcpServerPoolOptionConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
snDhcpServerPoolOptionCode Integer32,
|
|
snDhcpServerPoolOptionType INTEGER,
|
|
snDhcpServerPoolOptionAscii OCTET STRING,
|
|
snDhcpServerPoolOptionHexString OCTET STRING,
|
|
snDhcpServerPoolOptionIPString OCTET STRING,
|
|
snDhcpServerPoolOptionRowStatus RowStatus,
|
|
snDhcpServerPoolOptionBoolString OCTET STRING,
|
|
snDhcpServerPoolOptionIntString OCTET STRING,
|
|
snDhcpServerPoolOptionIPAddrPairString OCTET STRING,
|
|
snDhcpServerPoolOptionStaticRouteString OCTET STRING,
|
|
snDhcpServerPoolOptionSlpDirAgentString OCTET STRING,
|
|
snDhcpServerPoolOptionSlpSrvScopeString OCTET STRING,
|
|
snDhcpServerPoolOptionPxeIntfIdString OCTET STRING,
|
|
snDhcpServerPoolOptionPxeClientIdString OCTET STRING
|
|
}
|
|
|
|
snDhcpServerPoolOptionCode OBJECT-TYPE
|
|
SYNTAX Integer32 (1..254)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option code."
|
|
::= { snDhcpServerPoolOptionConfigEntry 1 }
|
|
|
|
snDhcpServerPoolOptionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ascii(0),
|
|
hex(1),
|
|
ip(2),
|
|
bool(3),
|
|
integer(4),
|
|
telephony(5),
|
|
ipaddrpair(6),
|
|
staticroute(7),
|
|
slpdiragent(8),
|
|
slpsrvscope(9),
|
|
pxeintfid(10),
|
|
pxeclientid(11)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option type."
|
|
::= { snDhcpServerPoolOptionConfigEntry 2 }
|
|
|
|
snDhcpServerPoolOptionAscii OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ascii string of an option."
|
|
::= { snDhcpServerPoolOptionConfigEntry 3 }
|
|
|
|
snDhcpServerPoolOptionHexString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hex string of an option. 1st to 16th hex strings,
|
|
which are 2 bytes, 4 bytes, 6 bytes or 8 bytes,
|
|
can be configured at most simultaneously.
|
|
That means the format of each string
|
|
must be '12', '1234', '123456' or '12345678'."
|
|
::= { snDhcpServerPoolOptionConfigEntry 4 }
|
|
|
|
snDhcpServerPoolOptionIPString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4..12))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip string of an option. 1 to 3 ip addresses can
|
|
be configured at most simultaneously."
|
|
::= { snDhcpServerPoolOptionConfigEntry 5 }
|
|
|
|
snDhcpServerPoolOptionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus. Three actions are used: active,
|
|
createAndGo, destroy."
|
|
::= { snDhcpServerPoolOptionConfigEntry 6 }
|
|
|
|
snDhcpServerPoolOptionBoolString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4..12))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bool string of an option."
|
|
::= { snDhcpServerPoolOptionConfigEntry 7 }
|
|
|
|
snDhcpServerPoolOptionIntString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4..12))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int string of an option"
|
|
::= { snDhcpServerPoolOptionConfigEntry 8 }
|
|
|
|
snDhcpServerPoolOptionIPAddrPairString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address pair (ip address & mask) string of option
|
|
policy-filter(21).Two sets of destination address and subnet
|
|
mask can be configured at most simultaneously."
|
|
::= { snDhcpServerPoolOptionConfigEntry 9 }
|
|
|
|
snDhcpServerPoolOptionStaticRouteString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address pair (detination & route) string of option
|
|
static-route(33). Two sets of destination address and static
|
|
route of the destination address can be configured at most
|
|
simultaneously."
|
|
::= { snDhcpServerPoolOptionConfigEntry 10 }
|
|
|
|
snDhcpServerPoolOptionSlpDirAgentString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..54))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This option specifies the location of one or more SLP
|
|
Directory Agents. The SLP Directory Agent Option specifies a list
|
|
of IP addresses for Directory Agents.
|
|
Directory Agents MUST be listed in order of
|
|
preference, if there is an order of preference.
|
|
The first byte in the Directory Agent option may be set to
|
|
either 0 or 1 (false or true). If it is set to 1,
|
|
the SLP User Agent or Service Agent so configured MUST NOT employ
|
|
either active or passive multicast discovery of Directory Agents.
|
|
maximum of three SLP Directory Agents can be configured.
|
|
|
|
The output of the object in the format
|
|
'false xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx' or
|
|
'true xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx' "
|
|
::= { snDhcpServerPoolOptionConfigEntry 11 }
|
|
|
|
snDhcpServerPoolOptionSlpSrvScopeString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..135))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The scope list is a comma delimited list which indicates
|
|
the scopes that a SLP Agent is configured to use.
|
|
The first byte determines (0 or 1) whether SLP Agents override their
|
|
static configuration for scopes with the <Scope List> string provided
|
|
by the option. This allows DHCP administrators to implement a policy
|
|
of assigning a set of scopes to Agents for service provision. If the
|
|
Mandatory byte is 0, static configuration takes precedence over the
|
|
DHCP provided scope list. If the Mandatory byte is 1, the <Scope
|
|
List> provided in this option MUST be used by the SLP Agent.
|
|
|
|
The maximum size of service scopes list is 128 bytes.
|
|
|
|
The output of the object in the format
|
|
'false slp-agent1:slp-agent2:slp-agent3:..' or
|
|
'true slp-agent1:slp-agent2:slp-agent3:..'"
|
|
::= { snDhcpServerPoolOptionConfigEntry 12 }
|
|
|
|
snDhcpServerPoolOptionPxeIntfIdString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..3))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object refers the value of PXE interface Id value.
|
|
First Octet encodes a network interface type. For now the only
|
|
supported value is 1 for Universal Network Device Interface (UNDI).
|
|
second and third bytes describe the interface revision."
|
|
::= { snDhcpServerPoolOptionConfigEntry 13 }
|
|
|
|
snDhcpServerPoolOptionPxeClientIdString OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..132))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object refers the value of PXE client id string.
|
|
|
|
First byte describes the type of the machine identifier in the
|
|
remaining octets in this option. 0 (zero) is the only value defined
|
|
for this octet at the present time, and it describes the remaining
|
|
octets as a Globally Unique Identifier (GUID).
|
|
The maximum size of client id string is 128 bytes."
|
|
::= { snDhcpServerPoolOptionConfigEntry 14 }
|
|
|
|
-- =================================================================
|
|
-- 3rd Table of snDhcpServerTableObjects : snDhcpServerPoolExcludedSingleAddressTable
|
|
-- =================================================================
|
|
snDhcpServerPoolExcludedSingleAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnDhcpServerPoolExcludedSingleAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring single excluded address to DHCP server address pools."
|
|
::= { snDhcpServerTableObjects 3 }
|
|
|
|
snDhcpServerPoolExcludedSingleAddressEntry OBJECT-TYPE
|
|
SYNTAX SnDhcpServerPoolExcludedSingleAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the objects for configuring
|
|
single excluded address to DHCP server address pools."
|
|
INDEX { snDhcpServerPoolName , snDhcpServerPoolExcludedAddressIndex }
|
|
::= { snDhcpServerPoolExcludedSingleAddressTable 1 }
|
|
|
|
SnDhcpServerPoolExcludedSingleAddressEntry ::=
|
|
SEQUENCE
|
|
{
|
|
snDhcpServerPoolExcludedAddressIndex Integer32,
|
|
snDhcpServerPoolExcludedSingleAddress IpAddress,
|
|
snDhcpServerPoolExcludedSingleAddressRowStatus RowStatus
|
|
}
|
|
|
|
snDhcpServerPoolExcludedAddressIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excluded Address Index."
|
|
::= { snDhcpServerPoolExcludedSingleAddressEntry 1 }
|
|
|
|
|
|
snDhcpServerPoolExcludedSingleAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Single address excluded from the address pool."
|
|
::= { snDhcpServerPoolExcludedSingleAddressEntry 2 }
|
|
|
|
|
|
snDhcpServerPoolExcludedSingleAddressRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus. Three actions are used: active,
|
|
createAndGo, destroy."
|
|
::= { snDhcpServerPoolExcludedSingleAddressEntry 3 }
|
|
|
|
-- =================================================================
|
|
-- 4th Table of snDhcpServerTableObjects : snDhcpServerPoolExcludedAddressRangeTable
|
|
-- =================================================================
|
|
snDhcpServerPoolExcludedAddressRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnDhcpServerPoolExcludedAddressRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring excluded address range to DHCP server address pools."
|
|
::= { snDhcpServerTableObjects 4 }
|
|
|
|
snDhcpServerPoolExcludedAddressRangeEntry OBJECT-TYPE
|
|
SYNTAX SnDhcpServerPoolExcludedAddressRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the objects for configuring
|
|
excluded address and excluded address range to DHCP server address pools."
|
|
INDEX { snDhcpServerPoolName , snDhcpServerPoolExcludedAddressRangeIndex }
|
|
::= { snDhcpServerPoolExcludedAddressRangeTable 1 }
|
|
|
|
SnDhcpServerPoolExcludedAddressRangeEntry ::=
|
|
SEQUENCE
|
|
{
|
|
snDhcpServerPoolExcludedAddressRangeIndex Integer32,
|
|
snDhcpServerPoolExcludedStartAddress IpAddress,
|
|
snDhcpServerPoolExcludedEndAddress IpAddress,
|
|
snDhcpServerPoolExcludedAddressRowStatus RowStatus
|
|
}
|
|
|
|
snDhcpServerPoolExcludedAddressRangeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..85)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excluded address range index."
|
|
::= { snDhcpServerPoolExcludedAddressRangeEntry 1 }
|
|
|
|
snDhcpServerPoolExcludedStartAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start addresses of the excluded from the address pool."
|
|
::= { snDhcpServerPoolExcludedAddressRangeEntry 2 }
|
|
|
|
snDhcpServerPoolExcludedEndAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End addresses of the excluded from the address pool."
|
|
::= { snDhcpServerPoolExcludedAddressRangeEntry 3 }
|
|
|
|
snDhcpServerPoolExcludedAddressRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus. Three actions are used: active,
|
|
createAndGo, destroy."
|
|
::= { snDhcpServerPoolExcludedAddressRangeEntry 4 }
|
|
|
|
END
|