639 lines
18 KiB
Plaintext
639 lines
18 KiB
Plaintext
BROCADE-SPX-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
snSwitch
|
|
FROM FOUNDRY-SN-SWITCH-GROUP-MIB
|
|
MacAddress
|
|
FROM SNMPv2-TC
|
|
DisplayString
|
|
FROM FOUNDRY-SN-AGENT-MIB
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB;
|
|
|
|
brcdSPXMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201708070000Z" -- Aug 7, 2017
|
|
ORGANIZATION "Ruckus Wireless, Inc"
|
|
CONTACT-INFO
|
|
"Technical Support Center
|
|
350 West Java Drive,
|
|
Sunnyvale, CA 94089, USA
|
|
Support URL: https://support.ruckuswireless.com
|
|
Phone: +1-855-782-5871
|
|
ROW TF Numbers: https://support.ruckuswireless.com/contact-us"
|
|
DESCRIPTION
|
|
"
|
|
Management Information for 802.1BR SPX system
|
|
configuration and operational status.
|
|
|
|
Supported Platforms:
|
|
- supported on FastIron ICX7750/ICX7450 platforms.
|
|
|
|
Copyright 1996-2017 Ruckus Wireless, Inc.
|
|
All rights reserved.
|
|
This Ruckus Wireless, Inc SNMP Management Information
|
|
Base Specification embodies Ruckus Wireless, Inc
|
|
confidential and proprietary intellectual property.
|
|
Ruckus Wireless, Inc retains all title and ownership
|
|
in the Specification, including any revisions.
|
|
|
|
This Specification is supplied AS IS, and Ruckus Wireless, Inc
|
|
Systems makes no warranty, either express or implied, as to the
|
|
use, operation, condition, or performance of the specification,
|
|
and any unintended consequence it may on the user environment."
|
|
REVISION "201505120000Z" -- May 12, 2015
|
|
DESCRIPTION
|
|
"Initial version"
|
|
REVISION "201708070000Z" -- Aug 7, 2017
|
|
DESCRIPTION
|
|
"Modified contact Info, Organization and Description"
|
|
::= { snSwitch 40}
|
|
|
|
|
|
--
|
|
-- 802.1BR system (SPX MIB)
|
|
--
|
|
|
|
brcdSPXGlobalObjects OBJECT IDENTIFIER ::= { brcdSPXMIB 1 }
|
|
brcdSPXTableObjects OBJECT IDENTIFIER ::= { brcdSPXMIB 2 }
|
|
|
|
--
|
|
-- SPX system Global Scalar Object Section
|
|
--
|
|
|
|
brcdSPXGlobalConfigCBState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure CB (Control Bridge) state for 802.1BR feature on the global level.
|
|
The set operation is allowed only on CB device.
|
|
none: reserve state.
|
|
enable: 802.1BR is enable on CB.
|
|
disable: 802.1BR is disable on CB.
|
|
The none state will be displayed if it is not a CB device"
|
|
::= { brcdSPXGlobalObjects 1}
|
|
|
|
brcdSPXGlobalConfigPEState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure PE (Port Extender) state for 802.1BR feature on the global level.
|
|
The set operation is allowed only on PE standalone device.
|
|
none: reserve state
|
|
enable: 802.1BR is enabled on PE.
|
|
disable: 802.1BR is disabled on PE.
|
|
Note that enabling/disabling PE takes effect only after system is saved
|
|
configure and reloaded. The none state will be displayed if it is not a PE device"
|
|
::= { brcdSPXGlobalObjects 2}
|
|
|
|
brcdSPXGlobalConfigZeroTouchEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure CB (Control Bridge) Zero Touch feature for 802.1BR on the global level.
|
|
The Zero Touch feature discovers new PE capable units, assigns them IDs,
|
|
defines SPX-ports/lags, and finally converts them to PE mode to join the SPX system.
|
|
The set operation is allowed only on CB device.
|
|
none: reserve state, Zero touch feature is not enabled on CB
|
|
enabled: Zero touch feature is enabled on CB.
|
|
The none state will be displayed if it is not a CB device.
|
|
The default state is none"
|
|
::= { brcdSPXGlobalObjects 3}
|
|
|
|
brcdSPXGlobalConfigZeroTouchDeny OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
deny (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure CB (Control Bridge) Zero Touch for 802.1BR on the global level.
|
|
The Zero Touch feature discovers new PE capable units, assigns them IDs,
|
|
defines SPX-ports/lags, and finally converts them to PE mode to join the SPX system.
|
|
The set operation is allowed on CB or PE standalone device.
|
|
none: neutral, receive packets only.
|
|
deny: Zero touch is disabled and the device will not be discovered by zero-touch
|
|
and spx secure-setup on other CB units.
|
|
The default state is none"
|
|
::= { brcdSPXGlobalObjects 4}
|
|
|
|
brcdSPXGlobalConfigAllowPEMovement OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure CB (Control Bridge) allow PE (Port Extender) movement for 802.1BR feature
|
|
on the global level.It allows the user to move PE unit without changing its unit ID.
|
|
The set operation is allowed only on CB device or PE standalone device.
|
|
none: reserve state, PE movement state is disable.
|
|
enabled: PE movement state is enable on a device.
|
|
The default state is none"
|
|
::= { brcdSPXGlobalObjects 5}
|
|
|
|
|
|
--
|
|
-- SPX system Table Object Section
|
|
--
|
|
|
|
--
|
|
-- SPX configuration unit Table
|
|
-- Use this table to display CB and PE units in a SPX system
|
|
-- and configure SPX related information for each PE unit on CB device
|
|
--
|
|
|
|
brcdSPXConfigUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdSPXConfigUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1BR SPX configuration unit table."
|
|
::= { brcdSPXTableObjects 1 }
|
|
|
|
brcdSPXConfigUnitEntry OBJECT-TYPE
|
|
SYNTAX BrcdSPXConfigUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in SPX configuration table."
|
|
INDEX { brcdSPXConfigUnitIndex }
|
|
::= { brcdSPXConfigUnitTable 1 }
|
|
|
|
BrcdSPXConfigUnitEntry ::= SEQUENCE {
|
|
brcdSPXConfigUnitIndex Integer32,
|
|
brcdSPXConfigUnitPEName DisplayString,
|
|
brcdSPXConfigUnitPESPXPort1 InterfaceIndexOrZero,
|
|
brcdSPXConfigUnitPESPXPort2 InterfaceIndexOrZero,
|
|
brcdSPXConfigUnitPESPXLag1 OCTET STRING,
|
|
brcdSPXConfigUnitPESPXLag2 OCTET STRING,
|
|
brcdSPXConfigUnitRowStatus INTEGER,
|
|
brcdSPXConfigUnitType DisplayString,
|
|
brcdSPXConfigUnitState INTEGER
|
|
}
|
|
|
|
brcdSPXConfigUnitIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPX unit Id. CB unit ID is from 1 to 16.
|
|
PE unit ID is from 17 to 56"
|
|
::= { brcdSPXConfigUnitEntry 1 }
|
|
|
|
brcdSPXConfigUnitPEName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A name description of PE unit."
|
|
::= { brcdSPXConfigUnitEntry 2 }
|
|
|
|
brcdSPXConfigUnitPESPXPort1 OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A PE SPX port on PE unit. It returns 0 if SPX port does not exist.
|
|
Note that the maximum PE SPX port on a PE unit is 2."
|
|
::= { brcdSPXConfigUnitEntry 3 }
|
|
|
|
brcdSPXConfigUnitPESPXPort2 OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A PE SPX port on PE unit. It returns 0 if SPX port does not exist.
|
|
Note that the maximum PE SPX port on a PE unit is 2."
|
|
::= { brcdSPXConfigUnitEntry 4 }
|
|
|
|
brcdSPXConfigUnitPESPXLag1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface indices which are the port membership
|
|
of a SPX LAG group on PE. Each interface index is a 32-bit integer
|
|
in big endian order. It returns NULL if PE SPX LAG does not exist.
|
|
Note that the maximum PE SPX LAG on a PE unit is 2. Each SPX LAG group
|
|
contains up to 16 ports."
|
|
::= { brcdSPXConfigUnitEntry 5 }
|
|
|
|
brcdSPXConfigUnitPESPXLag2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface indices which are the port membership
|
|
of a SPX LAG group on PE. Each interface index is a 32-bit integer
|
|
in big endian order. It returns NULL if PE SPX LAG does not exist.
|
|
Note that the maximum PE SPX LAG on a PE unit is 2. Each SPX LAG group
|
|
contains up to 16 ports."
|
|
::= { brcdSPXConfigUnitEntry 6 }
|
|
|
|
brcdSPXConfigUnitRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3)
|
|
-- create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to delete row in the
|
|
table and control if they are used. The values that
|
|
can be written are:
|
|
delete(3)...deletes the row
|
|
|
|
If the row exists, then a SET with value of create(4)
|
|
returns error 'wrongValue'. Deleted rows go away immediately.
|
|
The following values can be returned on reads:
|
|
noSuchName...no such row
|
|
other(1).....some other cases
|
|
valid(2)....the row exists and is valid"
|
|
::= { brcdSPXConfigUnitEntry 7 }
|
|
|
|
brcdSPXConfigUnitType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the configured/active system type for each unit."
|
|
::= { brcdSPXConfigUnitEntry 8 }
|
|
|
|
brcdSPXConfigUnitState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2),
|
|
reserved(3),
|
|
empty(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A state for each unit."
|
|
::= { brcdSPXConfigUnitEntry 9 }
|
|
|
|
--
|
|
-- SPX operation unit Table
|
|
-- Use this table to display SPX related information for each operational CB and PE units
|
|
--
|
|
|
|
brcdSPXOperUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdSPXOperUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1BR SPX operation unit table."
|
|
::= { brcdSPXTableObjects 2 }
|
|
|
|
|
|
brcdSPXOperUnitEntry OBJECT-TYPE
|
|
SYNTAX BrcdSPXOperUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in SPX operation table."
|
|
INDEX { brcdSPXOperUnitIndex }
|
|
::= { brcdSPXOperUnitTable 1 }
|
|
|
|
BrcdSPXOperUnitEntry ::= SEQUENCE {
|
|
brcdSPXOperUnitIndex Integer32,
|
|
brcdSPXOperUnitType DisplayString,
|
|
brcdSPXOperUnitRole INTEGER,
|
|
brcdSPXOperUnitMac MacAddress,
|
|
brcdSPXOperUnitPriority Integer32,
|
|
brcdSPXOperUnitState INTEGER,
|
|
brcdSPXOperUnitDescription DisplayString,
|
|
brcdSPXOperUnitImgVer DisplayString,
|
|
brcdSPXOperUnitBuildlVer DisplayString
|
|
|
|
}
|
|
|
|
brcdSPXOperUnitIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPX unit Id. CB unit ID is from 1 to 16.
|
|
PE unit ID is from 17 to 56"
|
|
::= { brcdSPXOperUnitEntry 1 }
|
|
|
|
brcdSPXOperUnitType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the configured/active system type for each unit."
|
|
::= { brcdSPXOperUnitEntry 2 }
|
|
|
|
brcdSPXOperUnitRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
active(2),
|
|
standby(3),
|
|
member(4),
|
|
standalone(5),
|
|
spxPe (6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A role for each unit."
|
|
::= { brcdSPXOperUnitEntry 3 }
|
|
|
|
brcdSPXOperUnitMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A MAC address for each unit"
|
|
::= { brcdSPXOperUnitEntry 4 }
|
|
|
|
brcdSPXOperUnitPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority in Active/backup election on CB units.
|
|
PE unit doesn't have priority, and 0 as default value."
|
|
::= { brcdSPXOperUnitEntry 5 }
|
|
|
|
brcdSPXOperUnitState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2),
|
|
reserved(3),
|
|
empty(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A state for each unit "
|
|
::= { brcdSPXOperUnitEntry 6}
|
|
|
|
brcdSPXOperUnitDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the CB stacking or PE joining state for each unit."
|
|
::= { brcdSPXOperUnitEntry 7 }
|
|
|
|
brcdSPXOperUnitImgVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the running software image for each unit"
|
|
::= { brcdSPXOperUnitEntry 8 }
|
|
|
|
brcdSPXOperUnitBuildlVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the running software build for each unit"
|
|
::= { brcdSPXOperUnitEntry 9 }
|
|
|
|
--
|
|
-- SPX configuration CB SPX port Table
|
|
-- Use this table to display and configure CB SPX ports for CB units
|
|
--
|
|
|
|
brcdSPXCBSPXPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdSPXCBSPXPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SPX configuration CB SPX port table."
|
|
::= { brcdSPXTableObjects 3 }
|
|
|
|
brcdSPXCBSPXPortEntry OBJECT-TYPE
|
|
SYNTAX BrcdSPXCBSPXPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SPX configuration CB SPX port table."
|
|
INDEX { brcdSPXCBSPXPortPort }
|
|
::= { brcdSPXCBSPXPortTable 1 }
|
|
|
|
BrcdSPXCBSPXPortEntry ::= SEQUENCE {
|
|
brcdSPXCBSPXPortPort InterfaceIndexOrZero,
|
|
brcdSPXCBSPXPortPEGroup DisplayString,
|
|
brcdSPXCBSPXPortRowStatus INTEGER
|
|
}
|
|
|
|
brcdSPXCBSPXPortPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex for the configured CB SPX port.
|
|
CB unit can have multiple SPX ports per unit. "
|
|
::= { brcdSPXCBSPXPortEntry 1 }
|
|
|
|
brcdSPXCBSPXPortPEGroup OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of IfIndex for the configured CB SPX port.
|
|
It is an optional field"
|
|
::= { brcdSPXCBSPXPortEntry 2 }
|
|
|
|
brcdSPXCBSPXPortRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to delete row in the
|
|
table and control if they are used. The values that
|
|
can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with value of create(4)
|
|
returns error 'wrongValue'. Deleted rows go away immediately.
|
|
The following values can be returned on reads:
|
|
noSuchName...no such row
|
|
other(1).....some other cases
|
|
valid(2)....the row exists and is valid"
|
|
::= { brcdSPXCBSPXPortEntry 3 }
|
|
|
|
--
|
|
-- SPX configuration CB SPX LAG Table
|
|
-- Use this table to display and configure CB SPX LAGs for CB units
|
|
--
|
|
|
|
brcdSPXCBSPXLagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdSPXCBSPXLagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SPX configuration CB SPX LAG table."
|
|
::= { brcdSPXTableObjects 4 }
|
|
|
|
brcdSPXCBSPXLagEntry OBJECT-TYPE
|
|
SYNTAX BrcdSPXCBSPXLagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SPX configuration CB SPX LAG table."
|
|
INDEX { brcdSPXCBSPXLagPrimaryPort }
|
|
::= { brcdSPXCBSPXLagTable 1 }
|
|
|
|
BrcdSPXCBSPXLagEntry ::= SEQUENCE {
|
|
brcdSPXCBSPXLagPrimaryPort InterfaceIndexOrZero,
|
|
brcdSPXCBSPXLagLagIflist OCTET STRING,
|
|
brcdSPXCBSPXLagPEGroup DisplayString,
|
|
brcdSPXCBSPXLagRowStatus INTEGER
|
|
}
|
|
|
|
brcdSPXCBSPXLagPrimaryPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAG primary port for the configured CB SPX LAG. This primary
|
|
port is the smallest port in the CB SPX LAG group. CB unit can have
|
|
multiple SPX LAGs per unit."
|
|
::= { brcdSPXCBSPXLagEntry 1 }
|
|
|
|
brcdSPXCBSPXLagLagIflist OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface indices which are the port membership
|
|
of a SPX Lag group on CB. Each interface index is a 32-bit integer
|
|
in big endian order. It returns NULL if CB SPX Lag does not exist.
|
|
Note that each CB SPX LAG group contains up to 16 ports."
|
|
::= { brcdSPXCBSPXLagEntry 2 }
|
|
|
|
brcdSPXCBSPXLagPEGroup OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of SPX LAG for the configured CB SPX LAG.
|
|
It is an optional field"
|
|
::= { brcdSPXCBSPXLagEntry 3 }
|
|
|
|
brcdSPXCBSPXLagRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to delete row in the
|
|
table and control if they are used. The values that
|
|
can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with value of create(4)
|
|
returns error 'wrongValue'. Deleted rows go away immediately.
|
|
The following values can be returned on reads:
|
|
noSuchName...no such row
|
|
other(1).....some other cases
|
|
valid(2)....the row exists and is valid"
|
|
::= { brcdSPXCBSPXLagEntry 4 }
|
|
|
|
--
|
|
-- SPX PE group Table
|
|
-- Use this table to display CB SPX port and all PE units attached to this SPX port
|
|
-- And SPX port on other end if it is a ring topology
|
|
--
|
|
|
|
brcdSPXPEGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdSPXPEGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SPX CB SPX port and PE group table."
|
|
::= { brcdSPXTableObjects 5 }
|
|
|
|
brcdSPXPEGroupEntry OBJECT-TYPE
|
|
SYNTAX BrcdSPXPEGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SPX PE group table."
|
|
INDEX { brcdSPXPEGroupCBSPXPort }
|
|
::= { brcdSPXPEGroupTable 1 }
|
|
|
|
BrcdSPXPEGroupEntry ::= SEQUENCE {
|
|
brcdSPXPEGroupCBSPXPort InterfaceIndexOrZero,
|
|
brcdSPXPEGroupPEGroup DisplayString,
|
|
brcdSPXPEGroupPEIdList DisplayString,
|
|
brcdSPXPEGroupCBSPXEndPort InterfaceIndexOrZero
|
|
}
|
|
|
|
brcdSPXPEGroupCBSPXPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex for the CB SPX port which is connected
|
|
to a group of PE units"
|
|
::= { brcdSPXPEGroupEntry 1 }
|
|
|
|
brcdSPXPEGroupPEGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of IfIndex for the configured CB SPX port.
|
|
It is an optional field"
|
|
::= { brcdSPXPEGroupEntry 2 }
|
|
|
|
brcdSPXPEGroupPEIdList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of PE unit ID indices which are attached to a CB SPX port."
|
|
::= { brcdSPXPEGroupEntry 3 }
|
|
|
|
brcdSPXPEGroupCBSPXEndPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex for the CB SPX port which is connected
|
|
to a group of PE units. This CB SPX port is at other end
|
|
if it is a ring topology. It returns 0 if it is a chain topology
|
|
and there is no the end port."
|
|
::= { brcdSPXPEGroupEntry 4 }
|
|
|
|
|
|
END
|