2923 lines
99 KiB
Plaintext
2923 lines
99 KiB
Plaintext
-- *****************************************************************
|
|
-- IMA-MIB - Inverse Multiplexing for ATM(IMA) MIB
|
|
--
|
|
-- April 2002, Subra Hegde
|
|
--
|
|
-- Copyright (c) 2002 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
-- This MIB is extracted from IMA v1.1 specified in
|
|
-- ATM FORUM Document: af-phy-0086.001
|
|
--
|
|
-- Following Changes are made in the ATM Forum MIB to
|
|
-- get rid of issues for compiling with mosy compiler.
|
|
-- * Changed accessible-for-notify to read-only
|
|
--
|
|
|
|
IMA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32,
|
|
NOTIFICATION-TYPE, enterprises
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION, DateAndTime, RowStatus
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex, InterfaceIndexOrZero, ifIndex
|
|
FROM IF-MIB;
|
|
|
|
atmfImaMib MODULE-IDENTITY
|
|
LAST-UPDATED "9902111830Z"
|
|
ORGANIZATION "The ATM Forum"
|
|
CONTACT-INFO
|
|
"ATM Forum
|
|
World Headquarters
|
|
2570 West El Camino Real
|
|
Suite 304
|
|
Mountain View, CA 94040-1313
|
|
USA
|
|
Phone: +1 415 949 6700
|
|
Fax: +1 415 949 6705
|
|
email: info@atmforum.com"
|
|
DESCRIPTION
|
|
"The MIB module for managing ATM Forum Inverse Multiplexing
|
|
for ATM (IMA) interfaces."
|
|
REVISION "9902111830Z"
|
|
DESCRIPTION
|
|
"Updated and repaired version of the IMA-MIB released with the
|
|
IMA v1.1 specification (af-phy-0086.001)."
|
|
REVISION "9701092245Z"
|
|
DESCRIPTION
|
|
"Initial incomplete version of the IMA-MIB as published in the
|
|
IMA v1.0 specification (af-phy-0086.000)."
|
|
::= { atmfIma 1 }
|
|
|
|
-- The object identifier subtree for the IMA-MIB.
|
|
|
|
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
|
|
atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 }
|
|
atmfIma OBJECT IDENTIFIER ::= { atmForumNetworkManagement 7 }
|
|
|
|
atmfImaMibObjects OBJECT IDENTIFIER ::= { atmfImaMib 1 }
|
|
atmfImaMibTraps OBJECT IDENTIFIER ::= { atmfImaMib 2 }
|
|
atmfImaMibTrapPrefix OBJECT IDENTIFIER ::= { atmfImaMibTraps 0 }
|
|
atmfImaMibConformance OBJECT IDENTIFIER ::= { atmfImaMib 3 }
|
|
|
|
-- Textual conventions
|
|
|
|
MilliSeconds ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time in milliseconds"
|
|
SYNTAX Integer32
|
|
|
|
ImaGroupState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
|
|
SYNTAX INTEGER {
|
|
notConfigured(1),
|
|
startUp(2),
|
|
startUpAck(3),
|
|
configAbortUnsupportedM(4),
|
|
configAbortIncompatibleSymmetry(5),
|
|
configAbortOther(6),
|
|
insufficientLinks(7),
|
|
blocked(8),
|
|
operational(9),
|
|
configAbortUnsupportedImaVersion(10) }
|
|
|
|
ImaGroupFailureStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Failure reason of an IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1, page 55"
|
|
SYNTAX INTEGER {
|
|
noFailure(1), -- unit is up
|
|
startUpNe(2),
|
|
startUpFe(3),
|
|
invalidMValueNe(4),
|
|
invalidMValueFe(5),
|
|
failedAssymetricNe(6),
|
|
failedAssymetricFe(7),
|
|
insufficientLinksNe(8),
|
|
insufficientLinksFe(9),
|
|
blockedNe(10),
|
|
blockedFe(11),
|
|
otherFailure(12),
|
|
invalidImaVersionNe(13),
|
|
invalidImaVersionFe(14) }
|
|
|
|
ImaAlarmStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A qualification of the IMA trap which indicates if the
|
|
condition causing the trap has been detected (declared)
|
|
or is no longer present (cleared)."
|
|
SYNTAX INTEGER {
|
|
cleared(1),
|
|
declared(2) }
|
|
|
|
ImaAlarmType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identification of the event that caused the generation
|
|
of the IMA trap."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 12.2.3 on page 79"
|
|
SYNTAX INTEGER {
|
|
imaAlarmLinkLif(1),
|
|
imaAlarmLinkLods(2),
|
|
imaAlarmLinkRfi(3),
|
|
imaAlarmLinkTxMisConnect(4),
|
|
imaAlarmLinkRxMisConnect(5),
|
|
imaAlarmLinkTxFault(6),
|
|
imaAlarmLinkRxFault(7),
|
|
imaAlarmLinkTxUnusableFe(8),
|
|
imaAlarmLinkRxUnusableFe(9),
|
|
imaAlarmGroupStartupFe(10),
|
|
imaAlarmGroupCfgAbort(11),
|
|
imaAlarmGroupCfgAbortFe(12),
|
|
imaAlarmGroupInsuffLinks(13),
|
|
imaAlarmGroupInsuffLinksFe(14),
|
|
imaAlarmGroupBlockedFe(15),
|
|
imaAlarmGroupTimingSynch(16) }
|
|
|
|
ImaGroupTxClkMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the transmit clock mode of the IMA group.
|
|
There are two possible modes: the Common Transmit
|
|
Clock (CTC) and the Independent Transmit Clock (ITC).
|
|
The CTC mode corresponds to the case when the transmit clock
|
|
of all IMA links are derived from the same source. The ITC
|
|
configuration corresponds to the case where there is at least
|
|
one IMA link whose transmit clock is derived from a source
|
|
different than at least another link transmit clock."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 7 on page 38"
|
|
SYNTAX INTEGER {
|
|
ctc(1),
|
|
itc(2) }
|
|
|
|
ImaGroupSymmetry ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group symmetry mode adjusted during the group start-up."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.7 on page 35"
|
|
SYNTAX INTEGER {
|
|
symmetricOperation(1),
|
|
asymmetricOperation(2),
|
|
asymmetricConfiguration(3) }
|
|
|
|
ImaFrameLength ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the IMA frames."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
|
|
SYNTAX INTEGER {
|
|
m32(32),
|
|
m64(64),
|
|
m128(128),
|
|
m256(256) }
|
|
|
|
ImaLinkState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of a link belonging to an IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
SYNTAX INTEGER {
|
|
notInGroup(1),
|
|
unusableNoGivenReason(2),
|
|
unusableFault(3),
|
|
unusableMisconnected(4),
|
|
unusableInhibited(5),
|
|
unusableFailed(6),
|
|
usable(7),
|
|
active(8) }
|
|
|
|
ImaLinkFailureStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local failure status of a link belonging to an IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
SYNTAX INTEGER {
|
|
noFailure(1),
|
|
imaLinkFailure(2),
|
|
lifFailure(3),
|
|
lodsFailure(4),
|
|
misConnected(5),
|
|
blocked(6),
|
|
fault(7),
|
|
farEndTxLinkUnusable(8),
|
|
farEndRxLinkUnusable(9) }
|
|
|
|
ImaTestProcStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States of the Test Pattern Procedure."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 13 on page 81"
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
operating(2),
|
|
linkFail(3) }
|
|
|
|
--
|
|
-- The IMA Group subtree
|
|
--
|
|
-- The IMA Group subtree consists of the number of IMA groups and a
|
|
-- table of IMA groups. Each entry in the table of IMA groups contains
|
|
-- information (configuration and status) specific to each group.
|
|
--
|
|
|
|
imaGroupNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IMA groups configured on this system."
|
|
::= { atmfImaMibObjects 1 }
|
|
|
|
imaGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Group Configuration table."
|
|
::= { atmfImaMibObjects 2 }
|
|
|
|
imaGroupEntry OBJECT-TYPE
|
|
SYNTAX ImaGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Group table."
|
|
INDEX { imaGroupIndex }
|
|
::= { imaGroupTable 1 }
|
|
|
|
ImaGroupEntry ::= SEQUENCE {
|
|
imaGroupIndex INTEGER (1..2147483647),
|
|
imaGroupRowStatus RowStatus,
|
|
imaGroupIfIndex InterfaceIndex,
|
|
imaGroupNeState ImaGroupState,
|
|
imaGroupFeState ImaGroupState,
|
|
imaGroupFailureStatus ImaGroupFailureStatus,
|
|
imaGroupSymmetry ImaGroupSymmetry,
|
|
imaGroupMinNumTxLinks INTEGER (1..32),
|
|
imaGroupMinNumRxLinks INTEGER (1..32),
|
|
imaGroupNeTxClkMode ImaGroupTxClkMode,
|
|
imaGroupFeTxClkMode ImaGroupTxClkMode,
|
|
imaGroupTxTimingRefLink InterfaceIndexOrZero,
|
|
imaGroupRxTimingRefLink InterfaceIndexOrZero,
|
|
imaGroupLastChange DateAndTime,
|
|
imaGroupTxImaId INTEGER (0..255),
|
|
imaGroupRxImaId INTEGER (0..255),
|
|
imaGroupTxFrameLength ImaFrameLength,
|
|
imaGroupRxFrameLength ImaFrameLength,
|
|
imaGroupDiffDelayMax MilliSeconds,
|
|
imaGroupLeastDelayLink InterfaceIndexOrZero,
|
|
imaGroupDiffDelayMaxObs MilliSeconds,
|
|
imaGroupAlphaValue INTEGER (1..2),
|
|
imaGroupBetaValue INTEGER (1..5),
|
|
imaGroupGammaValue INTEGER (1..5),
|
|
imaGroupRunningSecs Gauge32,
|
|
imaGroupUnavailSecs Counter32,
|
|
imaGroupNeNumFailures Counter32,
|
|
imaGroupFeNumFailures Counter32,
|
|
imaGroupTxAvailCellRate Gauge32,
|
|
imaGroupRxAvailCellRate Gauge32,
|
|
imaGroupNumTxCfgLinks Gauge32,
|
|
imaGroupNumRxCfgLinks Gauge32,
|
|
imaGroupNumTxActLinks Gauge32,
|
|
imaGroupNumRxActLinks Gauge32,
|
|
imaGroupTestLinkIfIndex InterfaceIndexOrZero,
|
|
imaGroupTestPattern INTEGER (-1..255),
|
|
imaGroupTestProcStatus ImaTestProcStatus,
|
|
imaGroupValidIntervals INTEGER (0..96),
|
|
imaGroupInvalidIntervals INTEGER (0..96),
|
|
imaGroupTimeElapsed INTEGER (0..899),
|
|
imaGroupTxOamLabelValue INTEGER (1..255),
|
|
imaGroupRxOamLabelValue INTEGER (0..255) }
|
|
|
|
imaGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the IMA Group."
|
|
::= { imaGroupEntry 1 }
|
|
|
|
imaGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The imaGroupRowStatus object allows create, change, and delete
|
|
operations on imaGroupTable entries.
|
|
|
|
To create a new conceptual row (or instance) of the imaGroupTable,
|
|
imaGroupRowStatus must be set to 'createAndWait' or 'createAndGo'.
|
|
If settable, a successful set of the following objects must be
|
|
performed before the imaGroupRowStatus of a new conceptual row can
|
|
be set to 'active':
|
|
|
|
imaGroupMinNumTxLinks
|
|
imaGroupMinNumRxLinks
|
|
imaGroupTxImaId
|
|
|
|
Some objects in the imaGroupTable control settings which can only
|
|
be established or changed at group start-up time. These objects
|
|
include:
|
|
|
|
imaGroupTxImaId
|
|
imaGroupSymmetry
|
|
imaGroupTxFrameLength
|
|
|
|
To change (modify) the imaGroupTxImaId object, the manager must
|
|
first set imaGroupRowStatus to 'notInService'. However, changes
|
|
to the following two objects can be optionally allowed while the
|
|
imaGroupRowStatus is 'active':
|
|
|
|
imaGroupSymmetry
|
|
imaGroupTxFrameLength
|
|
|
|
These two objects can be changed when the imaGroupRowStatus is
|
|
'active' in order to allow the far-end to recover from its
|
|
Config-Aborted state without having to force the near-end Group
|
|
State machine to go to the 'Not Configured' state. Changing
|
|
these object values after group start-up has completed causes a
|
|
restart of the IMA group.
|
|
|
|
Alternatively, as noted above, the agent implementation may
|
|
simply require the imaGroupRowStatus object to first be set to
|
|
'notInService' before allowing changes to either of these two
|
|
objects.
|
|
|
|
To remove (delete) an imaGroupTable entry from this table, set
|
|
imaGroupRowStatus to 'destroy'.
|
|
|
|
Setting the imaGroupRowStatus to 'active' has the effect of
|
|
activating the Group Startup Procedure. The Group Startup
|
|
Procedure uses provisioned links that have imaLinkRowStatus set
|
|
to 'active' and imaLinkGroupIndex set to the imaGroupIndex in
|
|
this conceptual row.
|
|
|
|
When the imaGroupRowStatus is not in 'active' state, the Group
|
|
State machine is in its 'Not Configured' state."
|
|
::= { imaGroupEntry 2 }
|
|
|
|
imaGroupIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the logical interface number ('ifIndex')
|
|
assigned to this IMA group, and is used to identify corresponding
|
|
rows in the Interfaces MIB.
|
|
|
|
Note that re-initialization of the management agent may cause
|
|
a client's 'imaGroupIfIndex' to change."
|
|
::= { imaGroupEntry 3 }
|
|
|
|
imaGroupNeState OBJECT-TYPE
|
|
SYNTAX ImaGroupState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the near-end IMA Group State
|
|
Machine."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
|
|
::= { imaGroupEntry 4 }
|
|
|
|
imaGroupFeState OBJECT-TYPE
|
|
SYNTAX ImaGroupState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the far-end IMA Group State
|
|
Machine."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
|
|
::= { imaGroupEntry 5 }
|
|
|
|
imaGroupFailureStatus OBJECT-TYPE
|
|
SYNTAX ImaGroupFailureStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current failure status of the IMA group (the reason why
|
|
the GTSM is in the down state)."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
|
|
::= { imaGroupEntry 6 }
|
|
|
|
imaGroupSymmetry OBJECT-TYPE
|
|
SYNTAX ImaGroupSymmetry
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Symmetry of the IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.7 on page 35"
|
|
DEFVAL { symmetricOperation }
|
|
::= { imaGroupEntry 7 }
|
|
|
|
imaGroupMinNumTxLinks OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum number of transmit links required to be Active for
|
|
the IMA group to be in the Operational state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1.1 on page 55"
|
|
::= { imaGroupEntry 8 }
|
|
|
|
imaGroupMinNumRxLinks OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum number of receive links required to be Active for
|
|
the IMA group to be in the Operational state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1.1 on page 55"
|
|
::= { imaGroupEntry 9 }
|
|
|
|
imaGroupNeTxClkMode OBJECT-TYPE
|
|
SYNTAX ImaGroupTxClkMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit clocking mode used by the near-end IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 7 on page 38"
|
|
DEFVAL { ctc }
|
|
::= { imaGroupEntry 10 }
|
|
|
|
imaGroupFeTxClkMode OBJECT-TYPE
|
|
SYNTAX ImaGroupTxClkMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit clocking mode used by the far-end IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 7 on page 38"
|
|
::= { imaGroupEntry 11 }
|
|
|
|
imaGroupTxTimingRefLink OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the transmit timing reference link to be
|
|
used by the near-end for IMA data cell clock recovery from
|
|
the ATM layer. The distinguished value of zero may be used
|
|
if no link has been configured in the IMA group, or if the
|
|
transmit timing reference link has not yet been selected."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 8.1.1 on page 41"
|
|
::= { imaGroupEntry 12 }
|
|
|
|
imaGroupRxTimingRefLink OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the receive timing reference link to be
|
|
used by near-end for IMA data cell clock recovery toward
|
|
the ATM layer. The distinguished value of zero may be used
|
|
if no link has been configured in the IMA group, or if the
|
|
receive timing reference link has not yet been detected."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 8.1.1 on page 41"
|
|
::= { imaGroupEntry 13 }
|
|
|
|
imaGroupLastChange OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-of-day the IMA group last changed operational
|
|
state (i.e., value of imaGroupNeState changed)."
|
|
::= { imaGroupEntry 14 }
|
|
|
|
imaGroupTxImaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA ID currently in use by the near-end IMA function."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.6 on page 35"
|
|
::= { imaGroupEntry 15 }
|
|
|
|
imaGroupRxImaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA ID currently in use by the far-end IMA function."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.6 on page 35"
|
|
::= { imaGroupEntry 16 }
|
|
|
|
imaGroupTxFrameLength OBJECT-TYPE
|
|
SYNTAX ImaFrameLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame length to be used by the IMA group in the transmit
|
|
direction. Can only be set when the IMA group is startup."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
|
|
DEFVAL { m128 }
|
|
::= { imaGroupEntry 17 }
|
|
|
|
imaGroupRxFrameLength OBJECT-TYPE
|
|
SYNTAX ImaFrameLength
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of IMA frame length as received from remote IMA function."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
|
|
::= { imaGroupEntry 18 }
|
|
|
|
imaGroupDiffDelayMax OBJECT-TYPE
|
|
SYNTAX MilliSeconds
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of milliseconds of differential delay among
|
|
the links that will be tolerated on this interface."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 9.2 on page 45"
|
|
DEFVAL { 25 }
|
|
::= { imaGroupEntry 19 }
|
|
|
|
imaGroupLeastDelayLink OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the link configured in the IMA group which has
|
|
the smallest link propagation delay. The distinguished value of
|
|
zero may be used if no link has been configured in the IMA group,
|
|
or if the link with the smallest link propagation delay has not
|
|
yet been determined."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 9.2 on page 45"
|
|
::= { imaGroupEntry 20 }
|
|
|
|
imaGroupDiffDelayMaxObs OBJECT-TYPE
|
|
SYNTAX MilliSeconds
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The latest maximum differential delay observed (in milliseconds)
|
|
between the links having the least and most link propagation delay,
|
|
among the receive links that are currently configured in the IMA
|
|
group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 9.2 on page 45"
|
|
::= { imaGroupEntry 21 }
|
|
|
|
imaGroupAlphaValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the 'alpha' value used to specify the number
|
|
of consecutive invalid ICP cells to be detected before moving
|
|
to the IMA Hunt state from the IMA Sync state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 11 on page 68"
|
|
DEFVAL { 2 }
|
|
::= { imaGroupEntry 22 }
|
|
|
|
imaGroupBetaValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the 'beta' value used to specify the number
|
|
of consecutive errored ICP cells to be detected before moving
|
|
to the IMA Hunt state from the IMA Sync state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 11 on page 68"
|
|
DEFVAL { 2 }
|
|
::= { imaGroupEntry 23 }
|
|
|
|
imaGroupGammaValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the 'gamma' value used to specify the number
|
|
of consecutive valid ICP cells to be detected before moving
|
|
to the IMA Sync state from the IMA PreSync state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 11 on page 68"
|
|
DEFVAL { 1 }
|
|
::= { imaGroupEntry 24 }
|
|
|
|
imaGroupRunningSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time (in seconds) since this IMA group has
|
|
been in the Operational state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
|
|
::= { imaGroupEntry 25 }
|
|
|
|
imaGroupUnavailSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals where the IMA Group Traffic
|
|
State Machine is Down."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55 and (R-136) in Section
|
|
12.2.2.2 on page 77"
|
|
::= { imaGroupEntry 26 }
|
|
|
|
imaGroupNeNumFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end group failure (Config-Aborted,
|
|
Insufficient-Links) has been reported since power-up or reboot."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-137) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupEntry 27 }
|
|
|
|
imaGroupFeNumFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end group failure (Config-Aborted-FE,
|
|
Insufficient-Links-FE, Blocked-FE) has been reported since
|
|
power-up or reboot. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-25) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupEntry 28 }
|
|
|
|
imaGroupTxAvailCellRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current cell rate (truncated value in cells per second)
|
|
provided by this IMA group in the transmit direction,
|
|
considering all the transmit links in the Active state."
|
|
::= { imaGroupEntry 29 }
|
|
|
|
imaGroupRxAvailCellRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current cell rate (truncated value in cells per second)
|
|
provided by this IMA group in the receive direction,
|
|
considering all the receive links in the Active state."
|
|
::= { imaGroupEntry 30 }
|
|
|
|
-- imaGroupNumTxCfgLinks is used by a network operator to tell how many
|
|
-- links are configured for transmit in the IMA group.
|
|
|
|
imaGroupNumTxCfgLinks OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of links that are configured to transmit in this IMA
|
|
group. This attribute overwrites the value of the
|
|
imaGroupNumRxActLinks attribute when the IMA group is configured
|
|
in the Symmetrical Configuration group symmetry mode."
|
|
::= { imaGroupEntry 31 }
|
|
|
|
-- imaGroupNumRxCfgLinks is used by a network operator to tell how many
|
|
-- links are configured for receive in the IMA group.
|
|
|
|
imaGroupNumRxCfgLinks OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of links that are configured to receive in this IMA
|
|
group. This attribute is overwritten by the value of the
|
|
imaGroupNumTxActLinks attribute when the IMA group is configured
|
|
in the Symmetrical Configuration group symmetry mode."
|
|
::= { imaGroupEntry 32 }
|
|
|
|
-- imaGroupNumTxActLinks is used by a network operator to tell how many
|
|
-- links which are configured for transmit are also Active.
|
|
|
|
imaGroupNumTxActLinks OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of links which are configured to transmit and are
|
|
currently Active in this IMA group."
|
|
::= { imaGroupEntry 33 }
|
|
|
|
-- imaGroupNumRxActLinks is used by a network operator to tell how many
|
|
-- links which are configured for receive are also Active.
|
|
|
|
imaGroupNumRxActLinks OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of links which are configured to receive and are
|
|
currently Active in this IMA group."
|
|
::= { imaGroupEntry 34 }
|
|
|
|
--
|
|
-- Test Pattern Procedure control objects. These objects are implemented
|
|
-- if the IMA implements the Test Pattern Procedure. In this case all
|
|
-- test pattern procedure related objects must be implemented. Specifically,
|
|
-- these objects are:
|
|
--
|
|
-- imaGroupTestLinkIfIndex
|
|
-- imaGroupTestPattern
|
|
-- imaGroupTestProcStatus
|
|
-- imaLinkRxTestPattern
|
|
-- imaLinkTestProcStatus
|
|
--
|
|
|
|
imaGroupTestLinkIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to designate an interface as the test link
|
|
for use in the Test Pattern Procedure. The distinguished value of
|
|
zero specifies that the implementation may choose the Test Link,
|
|
in which case, the implementation may also choose the value of
|
|
'imaGroupTestPattern'. The value zero may also be used if no link
|
|
has yet been added to the group.
|
|
|
|
Note that this value is NOT the same as the Tx LID value, but
|
|
instead either identifies the ifIndex value of the test link to be
|
|
used by the Test Pattern Procedure (i.e., the link whose LID value
|
|
is inserted in the Tx LID field of the transmitted ICP cells),
|
|
or identifies that the implementation may choose the test link (if
|
|
the value is zero)."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 13 on page 81"
|
|
DEFVAL { 0 }
|
|
::= { imaGroupEntry 35 }
|
|
|
|
imaGroupTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is used to specify the Tx Test Pattern
|
|
in an IMA group loopback operation. A value in the range 0 to
|
|
255 designates a specific pattern. The distinguished value of
|
|
-1 specifies that the implementation may choose the value. In
|
|
this case, the implementation may also choose the value of
|
|
'imaGroupTestLinkIfIndex'.
|
|
|
|
It is recommended that the specific value 255 not be used for
|
|
testing, since by (R-137) the IMA interface is required to
|
|
transmit 0xFF (i.e., 255) when the incoming test command is
|
|
inactive or the test link is not detected, and thus it cannot
|
|
be established for certain whether 255 was received due to an
|
|
actual loopback operation or due to the normal operation of an
|
|
IMA that is not performing (or else cannot perform) the test
|
|
pattern procedure."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 13 on page 81"
|
|
DEFVAL { -1 }
|
|
::= { imaGroupEntry 36 }
|
|
|
|
imaGroupTestProcStatus OBJECT-TYPE
|
|
SYNTAX ImaTestProcStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the
|
|
Test Pattern Procedure, and to note whether at least one
|
|
link failed the test.
|
|
|
|
The test is started by setting operating(2) status. If any
|
|
link should fail the test, the IMA will set the status to
|
|
linkFail(3). The linkFail(3) state will persist until
|
|
either the disabled(1) state is set or until no instance
|
|
of imaLinkTestProcStatus has the value linkFail(3).
|
|
|
|
Only the values disabled(1) and operating(2) may be written.
|
|
Writing the operating(2) value will not cause clearing of
|
|
the linkFail(3) state."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 13 on page 81"
|
|
DEFVAL { disabled }
|
|
::= { imaGroupEntry 37 }
|
|
|
|
--
|
|
-- Objects for use with the IMA Group Current Table, the IMA Group
|
|
-- Interval Table, and the IMA Group Total Table.
|
|
--
|
|
-- Implementation of these objects is optional, dependent on whether
|
|
-- the tables mentioned above are implemented.
|
|
--
|
|
|
|
imaGroupValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15 minute intervals for which valid data
|
|
was collected. The value will be 96 unless the IMA group table
|
|
entry was created within the last 24 hours, in which case the value
|
|
will be the number of complete 15 minute intervals since the IMA
|
|
group table entry was created. In the case where the agent is a
|
|
proxy, it is possible that some intervals are unavailable. In this
|
|
case, this value is the maximum interval number for which valid
|
|
data is available. This attribute is only mandatory when the IMA
|
|
Group Interval Statistics and/or IMA Group Total Statistics objects
|
|
are implemented."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-26) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupEntry 38 }
|
|
|
|
imaGroupInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals for which no valid data is available.
|
|
This attribute is only mandatory when the IMA Group Interval
|
|
Statistics and/or IMA Group Total Statistics objects are
|
|
implemented."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-26) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupEntry 39 }
|
|
|
|
imaGroupTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since the beginning of
|
|
the current measurement period. This attribute is only mandatory
|
|
when the IMA Group Current Statistics are implemented."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-26) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupEntry 40 }
|
|
|
|
--
|
|
-- Objects to report the IMA OAM Label values transmitted and
|
|
-- received by the IMA group.
|
|
--
|
|
|
|
imaGroupTxOamLabelValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IMA OAM Label value transmitted by the NE IMA unit."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.3 on page 32"
|
|
::= { imaGroupEntry 41 }
|
|
|
|
imaGroupRxOamLabelValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IMA OAM Label value transmitted by the FE IMA unit. The value 0
|
|
likely means that the IMA unit has not received an OAM Label
|
|
from the FE IMA unit at this time."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.3 on page 32"
|
|
::= { imaGroupEntry 42 }
|
|
|
|
--
|
|
-- The IMA Group Mapping Table subtree
|
|
--
|
|
-- The IMA Group Mapping Table subtree consists of a table of mappings
|
|
-- from 'ifIndex' values of IMA groups to their 'imaGroupIndex' values.
|
|
-- This table allows the Unit Management to perform easy look-ups (no
|
|
-- searches and sorts).
|
|
--
|
|
-- Note that the Group Index is different than the ifIndex.
|
|
--
|
|
|
|
imaGroupMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaGroupMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table mapping the 'ifIndex' values of 'imaGroupIfIndex'
|
|
to the 'imaGroupIndex' values of the corresponding IMA group."
|
|
::= { atmfImaMibObjects 3 }
|
|
|
|
imaGroupMappingEntry OBJECT-TYPE
|
|
SYNTAX ImaGroupMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row describes one ifIndex to imaGroupIndex mapping."
|
|
INDEX { ifIndex }
|
|
::= { imaGroupMappingTable 1 }
|
|
|
|
ImaGroupMappingEntry ::= SEQUENCE {
|
|
imaGroupMappingIndex Integer32 }
|
|
|
|
imaGroupMappingIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The imaGroupIndex of the IMA Group which implements the
|
|
specified interface."
|
|
::= { imaGroupMappingEntry 1 }
|
|
|
|
--
|
|
-- The IMA Link subtree
|
|
--
|
|
-- The IMA Link subtree consists of a table of IMA links. Each entry
|
|
-- in the table contains status information about a link which is part
|
|
-- of an IMA group, and also contains a configuration object to select
|
|
-- to which IMA group the link belongs.
|
|
--
|
|
|
|
imaLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA group Link Status and Configuration table."
|
|
::= { atmfImaMibObjects 4 }
|
|
|
|
imaLinkEntry OBJECT-TYPE
|
|
SYNTAX ImaLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Group Link table."
|
|
INDEX { imaLinkIfIndex }
|
|
::= { imaLinkTable 1 }
|
|
|
|
ImaLinkEntry ::= SEQUENCE {
|
|
imaLinkIfIndex InterfaceIndex,
|
|
imaLinkRowStatus RowStatus,
|
|
imaLinkGroupIndex Integer32,
|
|
imaLinkNeTxState ImaLinkState,
|
|
imaLinkNeRxState ImaLinkState,
|
|
imaLinkFeTxState ImaLinkState,
|
|
imaLinkFeRxState ImaLinkState,
|
|
imaLinkNeRxFailureStatus ImaLinkFailureStatus,
|
|
imaLinkFeRxFailureStatus ImaLinkFailureStatus,
|
|
imaLinkTxLid INTEGER (0..31),
|
|
imaLinkRxLid INTEGER (0..31),
|
|
imaLinkRelDelay MilliSeconds,
|
|
imaLinkImaViolations Counter32,
|
|
imaLinkOifAnomalies Counter32,
|
|
imaLinkNeSevErroredSecs Counter32,
|
|
imaLinkFeSevErroredSecs Counter32,
|
|
imaLinkNeUnavailSecs Counter32,
|
|
imaLinkFeUnavailSecs Counter32,
|
|
imaLinkNeTxUnusableSecs Counter32,
|
|
imaLinkNeRxUnusableSecs Counter32,
|
|
imaLinkFeTxUnusableSecs Counter32,
|
|
imaLinkFeRxUnusableSecs Counter32,
|
|
imaLinkNeTxNumFailures Counter32,
|
|
imaLinkNeRxNumFailures Counter32,
|
|
imaLinkFeTxNumFailures Counter32,
|
|
imaLinkFeRxNumFailures Counter32,
|
|
imaLinkTxStuffs Counter32,
|
|
imaLinkRxStuffs Counter32,
|
|
imaLinkRxTestPattern INTEGER (0..255),
|
|
imaLinkTestProcStatus ImaTestProcStatus,
|
|
imaLinkValidIntervals INTEGER (0..96),
|
|
imaLinkInvalidIntervals INTEGER (0..96),
|
|
imaLinkTimeElapsed INTEGER (0..899) }
|
|
|
|
imaLinkIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This corresponds to the 'ifIndex' of the MIB-II interface
|
|
on which this link is established. This object also
|
|
corresponds to the logical number ('ifIndex') assigned to
|
|
this IMA link."
|
|
::= { imaLinkEntry 1 }
|
|
|
|
imaLinkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The imaLinkRowStatus object allows create, change, and delete
|
|
operations on imaLinkTable entries.
|
|
|
|
To create a new conceptual row (or instance) of the imaLinkTable,
|
|
imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'.
|
|
A successful set of the imaLinkGroupIndex object must be performed
|
|
before the imaLinkRowStatus of a new conceptual row can be set to
|
|
'active'.
|
|
|
|
To change (modify) the imaLinkGroupIndex in an imaLinkTable entry,
|
|
the imaLinkRowStatus object must first be set to 'notInService'.
|
|
Only then can this object in the conceptual row be modified.
|
|
This is due to the fact that the imaLinkGroupIndex object provides
|
|
the association between a physical IMA link and the IMA group to
|
|
which it belongs, and setting the imaLinkGroupIndex object to a
|
|
different value has the effect of changing the association between
|
|
a physical IMA link and an IMA group. To place the link 'in group',
|
|
the imaLinkRowStatus object is set to 'active'. While the row is
|
|
not in 'active' state, both the Transmit and Receive IMA link state
|
|
machines are in the 'Not In Group' state.
|
|
|
|
To remove (delete) an imaLinkTable entry from this table, set
|
|
this object to 'destroy'."
|
|
::= { imaLinkEntry 2 }
|
|
|
|
imaLinkGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value which identifies the IMA group (imaGroupIndex)
|
|
of which this link is a member."
|
|
::= { imaLinkEntry 3 }
|
|
|
|
imaLinkNeTxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the near-end transmit link."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
::= { imaLinkEntry 4 }
|
|
|
|
imaLinkNeRxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the near-end receive link."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
::= { imaLinkEntry 5 }
|
|
|
|
imaLinkFeTxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the far-end transmit link as reported
|
|
via ICP cells."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
::= { imaLinkEntry 6 }
|
|
|
|
imaLinkFeRxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the far-end receive link as reported
|
|
via ICP cells."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
::= { imaLinkEntry 7 }
|
|
|
|
imaLinkNeRxFailureStatus OBJECT-TYPE
|
|
SYNTAX ImaLinkFailureStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current link failure status of the near-end receive link."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
::= { imaLinkEntry 8 }
|
|
|
|
imaLinkFeRxFailureStatus OBJECT-TYPE
|
|
SYNTAX ImaLinkFailureStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current link failure status of the far-end receive link
|
|
as reported via ICP cells."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
::= { imaLinkEntry 9 }
|
|
|
|
imaLinkTxLid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outgoing LID used currently on the link by the local end.
|
|
This value has meaning only if the link belongs to an IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.1 on page 26"
|
|
::= { imaLinkEntry 10 }
|
|
|
|
imaLinkRxLid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The incoming LID used currently on the link by the remote
|
|
end as reported via ICP cells. This value has meaning only
|
|
if the link belongs to an IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.1 on page 26"
|
|
::= { imaLinkEntry 11 }
|
|
|
|
imaLinkRelDelay OBJECT-TYPE
|
|
SYNTAX MilliSeconds
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The latest measured delay on this link relative to the link, in
|
|
the same IMA group, with the least delay."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 9.2 on page 45"
|
|
::= { imaLinkEntry 12 }
|
|
|
|
imaLinkImaViolations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICP violations: count of errored, invalid or missing ICP cells,
|
|
except during SES-IMA or UAS-IMA conditions."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-125) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 13 }
|
|
|
|
imaLinkOifAnomalies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OIF anomalies, except during SES-IMA or UAS-IMA
|
|
conditions, at the near-end. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-20) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 14 }
|
|
|
|
imaLinkNeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing >= 30% of the ICP cells
|
|
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
|
|
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
|
|
condition."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-126) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 15 }
|
|
|
|
imaLinkFeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing one or more RDI-IMA
|
|
defects, except during UAS-IMA-FE condition."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-127) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 16 }
|
|
|
|
imaLinkNeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at near-end: unavailability begins
|
|
at the onset of 10 contiguous SES-IMA and ends at the onset
|
|
of 10 contiguous seconds with no SES-IMA."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-128) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 17 }
|
|
|
|
imaLinkFeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at far-end: unavailability begins
|
|
at the onset of 10 contiguous SES-IMA-FE and ends at the onset of
|
|
10 contiguous seconds with no SES-IMA-FE."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-129) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 18 }
|
|
|
|
imaLinkNeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds: count of Tx Unusable seconds at the near-end
|
|
Tx LSM."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-130) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 19 }
|
|
|
|
imaLinkNeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds: count of Rx Unusable seconds at the near-end
|
|
Rx LSM."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-131) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 20 }
|
|
|
|
imaLinkFeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds at far-end: count of seconds with Tx Unusable
|
|
indications from the far-end Tx LSM."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-132) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 21 }
|
|
|
|
imaLinkFeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds at far-end: count of seconds with Rx Unusable
|
|
indications from the far-end Rx LSM."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-133) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 22 }
|
|
|
|
imaLinkNeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end transmit failure alarm condition
|
|
has been entered on this link (i.e., some form of implementation
|
|
specific transmit fault)."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-134) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 23 }
|
|
|
|
imaLinkNeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end receive failure alarm condition
|
|
has been entered on this link (i.e., LIF, LODS,
|
|
RFI-IMA, Mis-Connected or some form of implementation specific receive
|
|
fault)."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-135) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 24 }
|
|
|
|
imaLinkFeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end transmit failure alarm condition
|
|
has been entered on this link (i.e., Tx-Unusable-FE). This is an
|
|
optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-21) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 25 }
|
|
|
|
imaLinkFeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end receive failure alarm condition
|
|
has been entered on this link (i.e., Rx-Unusable-FE). This is an
|
|
optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-22) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 26 }
|
|
|
|
imaLinkTxStuffs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events inserted in the transmit direction.
|
|
This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-23) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 27 }
|
|
|
|
imaLinkRxStuffs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events detected in the receive direction.
|
|
This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-24) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 28 }
|
|
|
|
--
|
|
-- Test Pattern Procedure control objects. These objects are implemented
|
|
-- if the IMA implements the Test Pattern Procedure. In this case all
|
|
-- test pattern procedure related objects must be implemented. Specifically,
|
|
-- these objects are:
|
|
--
|
|
-- imaGroupTestLinkIfIndex
|
|
-- imaGroupTestPattern
|
|
-- imaGroupTestProcStatus
|
|
-- imaLinkRxTestPattern
|
|
-- imaLinkTestProcStatus
|
|
--
|
|
|
|
imaLinkRxTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the test pattern received in the
|
|
ICP Cell (octet 17) on the link during the IMA Test Pattern
|
|
Procedure. This value may then be compared to the transmitted
|
|
test pattern."
|
|
::= { imaLinkEntry 29 }
|
|
|
|
imaLinkTestProcStatus OBJECT-TYPE
|
|
SYNTAX ImaTestProcStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the current state of the Test Pattern
|
|
Procedure. If the value is disabled(1), the test is not
|
|
running. A value of operating(2) means the test is running
|
|
and no error has been found on this interface. A value of
|
|
linkFail(3) means an error has been detected on this link
|
|
during the test.
|
|
|
|
Once an error is detected, the linkFail(3) value is latched until
|
|
either this object is read or until the imaGroupTestProcStatus
|
|
is moved to disabled(1). Once read, if the error no longer
|
|
persists, a subsequent read will report the value operating(2)."
|
|
::= { imaLinkEntry 30 }
|
|
|
|
--
|
|
-- Objects for use with the IMA Link Current Table, the IMA Link
|
|
-- Interval Table, and the IMA Link Total Table.
|
|
--
|
|
-- Implementation of these objects is optional, dependent on whether
|
|
-- the tables mentioned above are implemented.
|
|
--
|
|
|
|
imaLinkValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15 minute intervals for which valid data
|
|
was collected. The value will be 96 unless the IMA group table
|
|
entry was created within the last 24 hours, in which case the value
|
|
will be the number of complete 15 minute intervals since the IMA
|
|
group table entry was created. In the case where the agent is a
|
|
proxy, it is possible that some intervals are unavailable. In this
|
|
case, this value is the maximum interval number for which valid
|
|
data is available. This attribute is only mandatory when the IMA
|
|
Link Interval Statistics and/or IMA Link Total Statistics objects
|
|
are implemented."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-26) in Section 12.2.2.2 on page 77"
|
|
::= { imaLinkEntry 31 }
|
|
|
|
imaLinkInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals for which no valid data is available.
|
|
This attribute is only mandatory when the IMA Link Interval
|
|
Statistics and/or IMA Link Total Statistics objects are
|
|
implemented."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkEntry 32 }
|
|
|
|
imaLinkTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since the beginning of
|
|
the current measurement period. This attribute is only mandatory
|
|
when the IMA Link Current Statistics are implemented."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkEntry 33 }
|
|
|
|
--
|
|
-- IMA Failure Alarms
|
|
--
|
|
-- Implementation of the imaFailureAlarm Trap is optional.
|
|
--
|
|
|
|
imaAlarmStatus OBJECT-TYPE
|
|
SYNTAX ImaAlarmStatus
|
|
-- MAX-ACCESS accessible-for-notify
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the IMA alarm."
|
|
::= { atmfImaMibObjects 5 }
|
|
|
|
imaAlarmType OBJECT-TYPE
|
|
SYNTAX ImaAlarmType
|
|
-- MAX-ACCESS accessible-for-notify
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of IMA alarm declared or cleared. The value of
|
|
ImaAlarmType identifies the type of alarm according to the
|
|
definitions in the IMA specification."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 12.2.3 on page 79"
|
|
::= { atmfImaMibObjects 6 }
|
|
|
|
imaFailureAlarm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
imaAlarmStatus,
|
|
imaAlarmType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The imaFailureAlarm provides a method for an agent implementing IMA
|
|
to notify an NMS of an alarm condition."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 12.2.3 on page 79"
|
|
::= { atmfImaMibTrapPrefix 1 }
|
|
|
|
--
|
|
-- The IMA Group Current Statistics subtree
|
|
--
|
|
-- The IMA Group Current Statistics subtree consists of a single table:
|
|
-- the IMA Group Current Table. This table contains various statistics
|
|
-- collected by each IMA group for the current 15 minute interval.
|
|
--
|
|
-- Implementation of IMA Group Current Table is optional.
|
|
--
|
|
|
|
imaGroupCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaGroupCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Group Current table."
|
|
::= { atmfImaMibObjects 7 }
|
|
|
|
imaGroupCurrentEntry OBJECT-TYPE
|
|
SYNTAX ImaGroupCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Group Current table."
|
|
INDEX { imaGroupIndex }
|
|
::= { imaGroupCurrentTable 1 }
|
|
|
|
ImaGroupCurrentEntry ::= SEQUENCE {
|
|
imaGroupCurrentUnavailSecs Gauge32,
|
|
imaGroupCurrentNeNumFailures Gauge32,
|
|
imaGroupCurrentFeNumFailures Gauge32 }
|
|
|
|
imaGroupCurrentUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals where the IMA Group Traffic
|
|
State Machine is Down in the current 15 minutes interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55, (R-136) and
|
|
(O-26) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupCurrentEntry 1 }
|
|
|
|
imaGroupCurrentNeNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end group failure (Config-Aborted,
|
|
Insufficient-Links) has been reported in the current 15
|
|
minutes interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-137) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaGroupCurrentEntry 2 }
|
|
|
|
imaGroupCurrentFeNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end group failure (Config-Aborted-FE,
|
|
Insufficient-Links-FE, Blocked-FE) has been reported in the
|
|
current 15 minutes interval. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-25) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaGroupCurrentEntry 3 }
|
|
|
|
--
|
|
-- The IMA Group Interval Statistics subtree
|
|
--
|
|
-- The IMA Group Interval Statistics subtree consists of a single table:
|
|
-- the IMA Group Interval Table. This table contains various statistics
|
|
-- collected by each IMA group over the previous 24 hours of operation.
|
|
-- The past 24 hours are broken into 96 completed 15 minute intervals.
|
|
--
|
|
-- Implementation of IMA Group Interval Table is optional.
|
|
--
|
|
|
|
imaGroupIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaGroupIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Group Interval table."
|
|
::= { atmfImaMibObjects 8 }
|
|
|
|
imaGroupIntervalEntry OBJECT-TYPE
|
|
SYNTAX ImaGroupIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Group Interval table."
|
|
INDEX { imaGroupIndex, imaGroupIntervalNumber }
|
|
::= { imaGroupIntervalTable 1 }
|
|
|
|
ImaGroupIntervalEntry ::= SEQUENCE {
|
|
imaGroupIntervalNumber INTEGER (1..96),
|
|
imaGroupIntervalUnavailSecs Gauge32,
|
|
imaGroupIntervalNeNumFailures Gauge32,
|
|
imaGroupIntervalFeNumFailures Gauge32 }
|
|
|
|
imaGroupIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, where 1 is the most
|
|
recently completed 15 minute interval and 96 is the least
|
|
recently completed 15 minutes interval (assuming that all
|
|
96 intervals are valid)."
|
|
::= { imaGroupIntervalEntry 1 }
|
|
|
|
imaGroupIntervalUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals where the IMA Group Traffic
|
|
State Machine is Down in one of the previous 96, individual 15
|
|
minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55, (R-136) and
|
|
(O-26) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupIntervalEntry 2 }
|
|
|
|
imaGroupIntervalNeNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end group failure (Config-Aborted,
|
|
Insufficient-Links) has been reported in one of the previous
|
|
96, individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-137) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaGroupIntervalEntry 3 }
|
|
|
|
imaGroupIntervalFeNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end group failure (Config-Aborted-FE,
|
|
Insufficient-Links-FE, Blocked-FE) has been reported in one of
|
|
the previous 96, individual 15 minute, intervals. This is an
|
|
optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-25) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaGroupIntervalEntry 4 }
|
|
|
|
--
|
|
-- The IMA Group Total Statistics subtree
|
|
--
|
|
-- The IMA Group Total Statistics subtree consists of a single table:
|
|
-- the IMA Group Total Table. This table contains the cumulative sum
|
|
-- of the various statistics collected by each IMA group for the 24 hour
|
|
-- period preceding the current interval.
|
|
--
|
|
-- Implementation of IMA Group Total Table is optional.
|
|
--
|
|
|
|
imaGroupTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaGroupTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Group Total table."
|
|
::= { atmfImaMibObjects 9 }
|
|
|
|
imaGroupTotalEntry OBJECT-TYPE
|
|
SYNTAX ImaGroupTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Group Total table."
|
|
INDEX { imaGroupIndex }
|
|
::= { imaGroupTotalTable 1 }
|
|
|
|
ImaGroupTotalEntry ::= SEQUENCE {
|
|
imaGroupTotalUnavailSecs Gauge32,
|
|
imaGroupTotalNeNumFailures Gauge32,
|
|
imaGroupTotalFeNumFailures Gauge32 }
|
|
|
|
imaGroupTotalUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals where the IMA Group Traffic
|
|
State Machine is Down in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55, (R-136) and
|
|
(O-27) in Section 12.2.2.2 on page 77"
|
|
::= { imaGroupTotalEntry 1 }
|
|
|
|
imaGroupTotalNeNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end group failure (Config-Aborted,
|
|
Insufficient-Links) has been reported in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-137) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaGroupTotalEntry 2 }
|
|
|
|
imaGroupTotalFeNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end group failure (Config-Aborted-FE,
|
|
Insufficient-Links-FE, Blocked-FE) has been reported in the
|
|
previous 24 hour interval. Invalid 15 minute intervals count
|
|
as 0. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-25) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaGroupTotalEntry 3 }
|
|
|
|
--
|
|
-- The IMA Link Current Statistics subtree
|
|
--
|
|
-- The IMA Link Current Statistics subtree consists of a single table:
|
|
-- the IMA Link Current Table. This table contains various statistics
|
|
-- collected by each IMA link for the current 15 minute interval.
|
|
--
|
|
-- Implementation of IMA Link Current Table is optional.
|
|
--
|
|
|
|
imaLinkCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaLinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Link Current table."
|
|
::= { atmfImaMibObjects 10 }
|
|
|
|
imaLinkCurrentEntry OBJECT-TYPE
|
|
SYNTAX ImaLinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Link Current table."
|
|
INDEX { ifIndex }
|
|
::= { imaLinkCurrentTable 1 }
|
|
|
|
ImaLinkCurrentEntry ::= SEQUENCE {
|
|
imaLinkCurrentImaViolations Gauge32,
|
|
imaLinkCurrentOifAnomalies Gauge32,
|
|
imaLinkCurrentNeSevErroredSecs Gauge32,
|
|
imaLinkCurrentFeSevErroredSecs Gauge32,
|
|
imaLinkCurrentNeUnavailSecs Gauge32,
|
|
imaLinkCurrentFeUnavailSecs Gauge32,
|
|
imaLinkCurrentNeTxUnusableSecs Gauge32,
|
|
imaLinkCurrentNeRxUnusableSecs Gauge32,
|
|
imaLinkCurrentFeTxUnusableSecs Gauge32,
|
|
imaLinkCurrentFeRxUnusableSecs Gauge32,
|
|
imaLinkCurrentNeTxNumFailures Gauge32,
|
|
imaLinkCurrentNeRxNumFailures Gauge32,
|
|
imaLinkCurrentFeTxNumFailures Gauge32,
|
|
imaLinkCurrentFeRxNumFailures Gauge32,
|
|
imaLinkCurrentTxStuffs Gauge32,
|
|
imaLinkCurrentRxStuffs Gauge32 }
|
|
|
|
imaLinkCurrentImaViolations OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICP violations: count of errored, invalid or missing ICP cells,
|
|
except during SES-IMA or UAS-IMA conditions, in the current
|
|
15 minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-125) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 1 }
|
|
|
|
imaLinkCurrentOifAnomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OIF anomalies, except during SES-IMA or UAS-IMA
|
|
conditions, at the near-end in the current 15 minute interval.
|
|
This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-20) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 2 }
|
|
|
|
imaLinkCurrentNeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing >= 30% of the ICP cells
|
|
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
|
|
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
|
|
condition, in the current 15 minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-126) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 3 }
|
|
|
|
imaLinkCurrentFeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing one or more RDI-IMA
|
|
defects, except during UAS-IMA-FE condition, in the current 15
|
|
minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-127) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 4 }
|
|
|
|
imaLinkCurrentNeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at near-end in the current 15 minute
|
|
interval: unavailability begins at the onset of 10 contiguous
|
|
SES-IMA and ends at the onset of 10 contiguous seconds with no
|
|
SES-IMA."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-128) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 5 }
|
|
|
|
imaLinkCurrentFeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at far-end in the current 15 minute
|
|
interval: unavailability begins at the onset of 10 contiguous
|
|
SES-IMA-FE and ends at the onset of 10 contiguous seconds with no
|
|
SES-IMA-FE."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-129) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 6 }
|
|
|
|
imaLinkCurrentNeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds: count of Unusable seconds at the near-end
|
|
Tx LSM in the current 15 minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-130) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 7 }
|
|
|
|
imaLinkCurrentNeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds: count of Unusable seconds at the near-end
|
|
Rx LSM in the current 15 minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-131) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 8 }
|
|
|
|
imaLinkCurrentFeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds at far-end: count of seconds with Tx Unusable
|
|
indications from the far-end Tx LSM in the current 15 minute
|
|
interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-132) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 9 }
|
|
|
|
imaLinkCurrentFeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds at far-end: count of seconds with Rx Unusable
|
|
indications from the far-end Rx LSM in the current 15 minute
|
|
interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-133) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 10 }
|
|
|
|
imaLinkCurrentNeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end transmit failure alarm condition
|
|
has been entered on this link (i.e., some form of implementation
|
|
specific transmit fault) in the current 15 minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-134) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 11 }
|
|
|
|
imaLinkCurrentNeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end receive failure alarm condition
|
|
has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected,
|
|
or some form of implementation specific receive fault)
|
|
in the current 15 minute interval."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-135) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 12 }
|
|
|
|
imaLinkCurrentFeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end transmit failure alarm condition
|
|
has been entered on this link (i.e., Tx-Unusable-FE) in the
|
|
current 15 minute interval. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-21) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 13 }
|
|
|
|
imaLinkCurrentFeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end receive failure alarm condition
|
|
has been entered on this link (i.e., Rx-Unusable-FE) in the
|
|
current 15 minute interval. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-22) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 14 }
|
|
|
|
imaLinkCurrentTxStuffs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events inserted in the transmit direction in
|
|
the current 15 minute interval. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-23) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 15 }
|
|
|
|
imaLinkCurrentRxStuffs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events detected in the receive direction in
|
|
the current 15 minute interval. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-24) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkCurrentEntry 16 }
|
|
|
|
--
|
|
-- The IMA Link Interval Statistics subtree
|
|
--
|
|
-- The IMA Link Interval Statistics subtree consists of a single table:
|
|
-- the IMA Link Interval Table. This table contains various statistics
|
|
-- collected by each IMA link over the previous 24 hours of operation.
|
|
-- The past 24 hours are broken into 96 completed 15 minute intervals.
|
|
--
|
|
-- Implementation of IMA Link Interval Table is optional.
|
|
--
|
|
|
|
imaLinkIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaLinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Link Interval table."
|
|
::= { atmfImaMibObjects 11 }
|
|
|
|
imaLinkIntervalEntry OBJECT-TYPE
|
|
SYNTAX ImaLinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Link Interval table."
|
|
INDEX { ifIndex, imaLinkIntervalNumber }
|
|
::= { imaLinkIntervalTable 1 }
|
|
|
|
ImaLinkIntervalEntry ::= SEQUENCE {
|
|
imaLinkIntervalNumber INTEGER (1..96),
|
|
imaLinkIntervalImaViolations Gauge32,
|
|
imaLinkIntervalOifAnomalies Gauge32,
|
|
imaLinkIntervalNeSevErroredSecs Gauge32,
|
|
imaLinkIntervalFeSevErroredSecs Gauge32,
|
|
imaLinkIntervalNeUnavailSecs Gauge32,
|
|
imaLinkIntervalFeUnavailSecs Gauge32,
|
|
imaLinkIntervalNeTxUnusableSecs Gauge32,
|
|
imaLinkIntervalNeRxUnusableSecs Gauge32,
|
|
imaLinkIntervalFeTxUnusableSecs Gauge32,
|
|
imaLinkIntervalFeRxUnusableSecs Gauge32,
|
|
imaLinkIntervalNeTxNumFailures Gauge32,
|
|
imaLinkIntervalNeRxNumFailures Gauge32,
|
|
imaLinkIntervalFeTxNumFailures Gauge32,
|
|
imaLinkIntervalFeRxNumFailures Gauge32,
|
|
imaLinkIntervalTxStuffs Gauge32,
|
|
imaLinkIntervalRxStuffs Gauge32 }
|
|
|
|
imaLinkIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, where 1 is the most
|
|
recently completed 15 minute interval and 96 is the least
|
|
recently completed 15 minutes interval (assuming that all
|
|
96 intervals are valid)."
|
|
::= { imaLinkIntervalEntry 1 }
|
|
|
|
imaLinkIntervalImaViolations OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICP violations: count of errored, invalid or missing ICP cells,
|
|
except during SES-IMA or UAS-IMA conditions, in one of the
|
|
previous 96, individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-125) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 2 }
|
|
|
|
imaLinkIntervalOifAnomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OIF anomalies, except during SES-IMA or UAS-IMA
|
|
conditions, at the near-end in one of the previous 96, individual
|
|
15 minute, intervals. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-20) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 3 }
|
|
|
|
imaLinkIntervalNeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing >= 30% of the ICP cells
|
|
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
|
|
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
|
|
condition, in one of the previous 96, individual 15 minute,
|
|
intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-126) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 4 }
|
|
|
|
imaLinkIntervalFeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing one or more RDI-IMA
|
|
defects, except during UAS-IMA-FE condition, in one of the previous
|
|
96, individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-127) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 5 }
|
|
|
|
imaLinkIntervalNeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at near-end in one of the previous
|
|
96, individual 15 minute, intervals: unavailability begins at the
|
|
onset of 10 contiguous SES-IMA and ends at the onset of 10
|
|
contiguous seconds with no SES-IMA."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-128) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 6 }
|
|
|
|
imaLinkIntervalFeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at far-end in one of the previous
|
|
96, individual 15 minute, intervals: unavailability begins at the
|
|
onset of 10 contiguous SES-IMA-FE and ends at the onset of 10
|
|
contiguous seconds with no SES-IMA-FE."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-129) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 7 }
|
|
|
|
imaLinkIntervalNeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds: count of Unusable seconds at the near-end
|
|
Tx LSM in one of the previous 96, individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-130) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 8 }
|
|
|
|
imaLinkIntervalNeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds: count of Unusable seconds at the near-end
|
|
Rx LSM in one of the previous 96, individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-131) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 9 }
|
|
|
|
imaLinkIntervalFeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds at far-end: count of seconds with Tx Unusable
|
|
indications from the far-end Tx LSM in one of the previous 96,
|
|
individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-132) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 10 }
|
|
|
|
imaLinkIntervalFeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds at far-end: count of seconds with Rx Unusable
|
|
indications from the far-end Rx LSM in one of the previous 96,
|
|
individual 15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-133) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 11 }
|
|
|
|
imaLinkIntervalNeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end transmit failure alarm condition
|
|
has been entered on this link (i.e., some form of implementation
|
|
specific transmit fault) in one of the previous 96, individual
|
|
15 minute, intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-134) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 12 }
|
|
|
|
imaLinkIntervalNeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end receive failure alarm condition
|
|
has been entered on this link (i.e., LIF, LODS, RFI-IMA,
|
|
Mis-Connected, or some form of implementation specific
|
|
receive fault) in one of the previous 96, individual 15 minute,
|
|
intervals."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-135) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 13 }
|
|
|
|
imaLinkIntervalFeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end transmit failure alarm condition
|
|
has been entered on this link (i.e., Tx-Unusable-FE) in one of the
|
|
previous 96, individual 15 minute, intervals. This is an optional
|
|
attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-21) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 14 }
|
|
|
|
imaLinkIntervalFeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end receive failure alarm condition
|
|
has been entered on this link (i.e., Rx-Unusable-FE) in one of
|
|
the previous 96, individual 15 minute, intervals. This is an
|
|
optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-22) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 15 }
|
|
|
|
imaLinkIntervalTxStuffs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events inserted in the transmit direction in
|
|
one of the previous 96, individual 15 minute, intervals. This
|
|
is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-23) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 16 }
|
|
|
|
imaLinkIntervalRxStuffs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events detected in the receive direction in
|
|
one of the previous 96, individual 15 minute, intervals. This
|
|
is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-24) and (O-26) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkIntervalEntry 17 }
|
|
|
|
--
|
|
-- The IMA Link Total Statistics subtree
|
|
--
|
|
-- The IMA Link Total Statistics subtree consists of a single table:
|
|
-- the IMA Link Total Table. This table contains the cumulative sum
|
|
-- of the various statistics collected by each IMA link for the 24 hour
|
|
-- period preceding the current interval.
|
|
--
|
|
-- Implementation of IMA Link Total Table is optional.
|
|
--
|
|
|
|
imaLinkTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ImaLinkTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA Link Total table."
|
|
::= { atmfImaMibObjects 12 }
|
|
|
|
imaLinkTotalEntry OBJECT-TYPE
|
|
SYNTAX ImaLinkTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IMA Link Total table."
|
|
INDEX { ifIndex }
|
|
::= { imaLinkTotalTable 1 }
|
|
|
|
ImaLinkTotalEntry ::= SEQUENCE {
|
|
imaLinkTotalImaViolations Gauge32,
|
|
imaLinkTotalOifAnomalies Gauge32,
|
|
imaLinkTotalNeSevErroredSecs Gauge32,
|
|
imaLinkTotalFeSevErroredSecs Gauge32,
|
|
imaLinkTotalNeUnavailSecs Gauge32,
|
|
imaLinkTotalFeUnavailSecs Gauge32,
|
|
imaLinkTotalNeTxUnusableSecs Gauge32,
|
|
imaLinkTotalNeRxUnusableSecs Gauge32,
|
|
imaLinkTotalFeTxUnusableSecs Gauge32,
|
|
imaLinkTotalFeRxUnusableSecs Gauge32,
|
|
imaLinkTotalNeTxNumFailures Gauge32,
|
|
imaLinkTotalNeRxNumFailures Gauge32,
|
|
imaLinkTotalFeTxNumFailures Gauge32,
|
|
imaLinkTotalFeRxNumFailures Gauge32,
|
|
imaLinkTotalTxStuffs Gauge32,
|
|
imaLinkTotalRxStuffs Gauge32 }
|
|
|
|
imaLinkTotalImaViolations OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICP violations: count of errored, invalid or missing ICP cells,
|
|
except during SES-IMA or UAS-IMA conditions, in the previous 24
|
|
hour interval. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-125) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 1 }
|
|
|
|
imaLinkTotalOifAnomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OIF anomalies, except during SES-IMA or UAS-IMA
|
|
conditions, at the near-end in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0. This is an optional
|
|
attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-20) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 2 }
|
|
|
|
imaLinkTotalNeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing >= 30% of the ICP cells
|
|
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
|
|
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
|
|
condition, in the previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-126) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 3 }
|
|
|
|
imaLinkTotalFeSevErroredSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of one second intervals containing one or more RDI-IMA
|
|
defects, except during UAS-IMA-FE condition, in the previous 24
|
|
hour interval. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-127) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 4 }
|
|
|
|
imaLinkTotalNeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at near-end in the previous 24 hour
|
|
interval: unavailability begins at the onset of 10 contiguous
|
|
SES-IMA and ends at the onset of 10 contiguous seconds with no
|
|
SES-IMA. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-128) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 5 }
|
|
|
|
imaLinkTotalFeUnavailSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of unavailable seconds at far-end in the previous 24 hour
|
|
interval: unavailability begins at the onset of 10 contiguous
|
|
SES-IMA-FE and ends at the onset of 10 contiguous seconds with no
|
|
SES-IMA-FE. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-129) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 6 }
|
|
|
|
imaLinkTotalNeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds: count of Unusable seconds at the near-end
|
|
Tx LSM in the previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-130) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 7 }
|
|
|
|
imaLinkTotalNeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds: count of Unusable seconds at the near-end
|
|
Rx LSM in the previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-131) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 8 }
|
|
|
|
imaLinkTotalFeTxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Unusable seconds at far-end: count of seconds with Tx Unusable
|
|
indications from the far-end Tx LSM in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-132) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 9 }
|
|
|
|
imaLinkTotalFeRxUnusableSecs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Unusable seconds at far-end: count of seconds with Rx Unusable
|
|
indications from the far-end Rx LSM in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-133) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 10 }
|
|
|
|
imaLinkTotalNeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end transmit failure alarm condition
|
|
has been entered on this link (i.e., some form of implementation
|
|
specific transmit fault) in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-134) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 11 }
|
|
|
|
imaLinkTotalNeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a near-end receive failure alarm condition
|
|
has been entered on this link (i.e., LIF, LODS, RFI-IMA,
|
|
Mis-Connected, or some form of implementation specific receive fault)
|
|
in the previous 24 hour interval. Invalid 15 minute intervals
|
|
count as 0."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (R-135) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 12 }
|
|
|
|
imaLinkTotalFeTxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end transmit failure alarm condition
|
|
has been entered on this link (i.e., Tx-Unusable-FE) in the
|
|
previous 24 hour interval. Invalid 15 minute intervals count
|
|
as 0. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-21) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 13 }
|
|
|
|
imaLinkTotalFeRxNumFailures OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a far-end receive failure alarm condition
|
|
has been entered on this link (i.e., Rx-Unusable-FE) in the
|
|
previous 24 hour interval. Invalid 15 minute intervals count
|
|
as 0. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-22) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 14 }
|
|
|
|
imaLinkTotalTxStuffs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events inserted in the transmit direction in
|
|
the previous 24 hour interval. Invalid 15 minute intervals
|
|
count as 0. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-23) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 15 }
|
|
|
|
imaLinkTotalRxStuffs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of stuff events detected in the receive direction in
|
|
the previous 24 hour interval. Invalid 15 minute intervals
|
|
count as 0. This is an optional attribute."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, (O-24) and (O-27) in Section 12.2.2.2
|
|
on page 77"
|
|
::= { imaLinkTotalEntry 16 }
|
|
|
|
-- Conformance Information
|
|
|
|
atmfImaMibGroups OBJECT IDENTIFIER ::= { atmfImaMibConformance 1 }
|
|
atmfImaMibCompliances OBJECT IDENTIFIER ::= { atmfImaMibConformance 2 }
|
|
|
|
-- Compliance Statements
|
|
|
|
atmfImaMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for network elements implementing
|
|
ATM Forum Inverse Multiplexing for ATM (IMA) interfaces."
|
|
MODULE -- this module
|
|
|
|
-- Mandatory Part
|
|
|
|
MANDATORY-GROUPS {
|
|
imaGroupGroup,
|
|
imaLinkGroup,
|
|
imaGroupMappingTableGroup,
|
|
imaAlarmGroup }
|
|
-- imaNotificationsGroup }
|
|
|
|
GROUP imaTestPatternGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for implementations that support
|
|
the Test Pattern Procedure."
|
|
|
|
GROUP imaGroupIntervalGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for implementations that support
|
|
interval statistics."
|
|
|
|
GROUP imaLinkIntervalGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for implementations that support
|
|
interval statistics."
|
|
|
|
-- Compliance Part
|
|
|
|
OBJECT imaGroupSymmetry
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupMinNumTxLinks
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupMinNumRxLinks
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupTxImaId
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupTxFrameLength
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupDiffDelayMax
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupAlphaValue
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupBetaValue
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupGammaValue
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupFeNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaGroupTestLinkIfIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaGroupTestPattern
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT imaLinkOifAnomalies
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkFeTxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkFeRxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkTxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkRxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaGroupCurrentFeNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaGroupIntervalFeNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaGroupTotalFeNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkCurrentOifAnomalies
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkCurrentFeTxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkCurrentFeRxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkCurrentTxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkCurrentRxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkIntervalOifAnomalies
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkIntervalFeTxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkIntervalFeRxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkIntervalTxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkIntervalRxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkTotalOifAnomalies
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkTotalFeTxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkTotalFeRxNumFailures
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkTotalTxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
OBJECT imaLinkTotalRxStuffs
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This is an optional attribute."
|
|
|
|
::= { atmfImaMibCompliances 1 }
|
|
|
|
-- Units of Conformance
|
|
|
|
imaGroupGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaGroupNumber,
|
|
imaGroupRowStatus,
|
|
imaGroupIfIndex,
|
|
imaGroupNeState,
|
|
imaGroupFeState,
|
|
imaGroupFailureStatus,
|
|
imaGroupSymmetry,
|
|
imaGroupMinNumTxLinks,
|
|
imaGroupMinNumRxLinks,
|
|
imaGroupNeTxClkMode,
|
|
imaGroupFeTxClkMode,
|
|
imaGroupTxTimingRefLink,
|
|
imaGroupRxTimingRefLink,
|
|
imaGroupLastChange,
|
|
imaGroupTxImaId,
|
|
imaGroupRxImaId,
|
|
imaGroupTxFrameLength,
|
|
imaGroupRxFrameLength,
|
|
imaGroupDiffDelayMax,
|
|
imaGroupLeastDelayLink,
|
|
imaGroupDiffDelayMaxObs,
|
|
imaGroupAlphaValue,
|
|
imaGroupBetaValue,
|
|
imaGroupGammaValue,
|
|
imaGroupRunningSecs,
|
|
imaGroupUnavailSecs,
|
|
imaGroupNeNumFailures,
|
|
imaGroupFeNumFailures,
|
|
imaGroupTxAvailCellRate,
|
|
imaGroupRxAvailCellRate,
|
|
imaGroupNumTxCfgLinks,
|
|
imaGroupNumRxCfgLinks,
|
|
imaGroupNumTxActLinks,
|
|
imaGroupNumRxActLinks,
|
|
imaGroupTxOamLabelValue,
|
|
imaGroupRxOamLabelValue }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects providing configuration and status information for
|
|
an IMA group definition."
|
|
::= { atmfImaMibGroups 1 }
|
|
|
|
imaLinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaLinkRowStatus,
|
|
imaLinkGroupIndex,
|
|
imaLinkNeTxState,
|
|
imaLinkNeRxState,
|
|
imaLinkFeTxState,
|
|
imaLinkFeRxState,
|
|
imaLinkNeRxFailureStatus,
|
|
imaLinkFeRxFailureStatus,
|
|
imaLinkTxLid,
|
|
imaLinkRxLid,
|
|
imaLinkRelDelay,
|
|
imaLinkImaViolations,
|
|
imaLinkOifAnomalies,
|
|
imaLinkNeSevErroredSecs,
|
|
imaLinkFeSevErroredSecs,
|
|
imaLinkNeUnavailSecs,
|
|
imaLinkFeUnavailSecs,
|
|
imaLinkNeTxUnusableSecs,
|
|
imaLinkNeRxUnusableSecs,
|
|
imaLinkFeTxUnusableSecs,
|
|
imaLinkFeRxUnusableSecs,
|
|
imaLinkNeTxNumFailures,
|
|
imaLinkNeRxNumFailures,
|
|
imaLinkFeTxNumFailures,
|
|
imaLinkFeRxNumFailures,
|
|
imaLinkTxStuffs,
|
|
imaLinkRxStuffs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects providing status information for an IMA link."
|
|
::= { atmfImaMibGroups 2 }
|
|
|
|
imaGroupMappingTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaGroupMappingIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table mapping the 'ifIndex' values of 'imaGroupIfIndex'
|
|
to the 'imaGroupIndex' values of the corresponding
|
|
IMA group."
|
|
::= { atmfImaMibGroups 3 }
|
|
|
|
imaTestPatternGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaGroupTestLinkIfIndex,
|
|
imaGroupTestPattern,
|
|
imaGroupTestProcStatus,
|
|
imaLinkRxTestPattern,
|
|
imaLinkTestProcStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects in the imaGroupTable and imaLinkTable which control and
|
|
report on the Test Pattern Procedure. These objects must be
|
|
implemented if the IMA Test Pattern Procedure is supported."
|
|
::= { atmfImaMibGroups 4 }
|
|
|
|
imaAlarmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaAlarmStatus,
|
|
imaAlarmType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects used in the imaFailureAlarm notification."
|
|
::= { atmfImaMibGroups 5 }
|
|
|
|
imaGroupIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaGroupValidIntervals,
|
|
imaGroupInvalidIntervals,
|
|
imaGroupTimeElapsed,
|
|
imaGroupCurrentUnavailSecs,
|
|
imaGroupCurrentNeNumFailures,
|
|
imaGroupCurrentFeNumFailures,
|
|
imaGroupIntervalUnavailSecs,
|
|
imaGroupIntervalNeNumFailures,
|
|
imaGroupIntervalFeNumFailures,
|
|
imaGroupTotalUnavailSecs,
|
|
imaGroupTotalNeNumFailures,
|
|
imaGroupTotalFeNumFailures }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects containing interval statistics for an IMA group."
|
|
::= { atmfImaMibGroups 6 }
|
|
|
|
imaLinkIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
imaLinkValidIntervals,
|
|
imaLinkInvalidIntervals,
|
|
imaLinkTimeElapsed,
|
|
imaLinkCurrentImaViolations,
|
|
imaLinkCurrentOifAnomalies,
|
|
imaLinkCurrentNeSevErroredSecs,
|
|
imaLinkCurrentFeSevErroredSecs,
|
|
imaLinkCurrentNeUnavailSecs,
|
|
imaLinkCurrentFeUnavailSecs,
|
|
imaLinkCurrentNeTxUnusableSecs,
|
|
imaLinkCurrentNeRxUnusableSecs,
|
|
imaLinkCurrentFeTxUnusableSecs,
|
|
imaLinkCurrentFeRxUnusableSecs,
|
|
imaLinkCurrentNeTxNumFailures,
|
|
imaLinkCurrentNeRxNumFailures,
|
|
imaLinkCurrentFeTxNumFailures,
|
|
imaLinkCurrentFeRxNumFailures,
|
|
imaLinkCurrentTxStuffs,
|
|
imaLinkCurrentRxStuffs,
|
|
imaLinkIntervalImaViolations,
|
|
imaLinkIntervalOifAnomalies,
|
|
imaLinkIntervalNeSevErroredSecs,
|
|
imaLinkIntervalFeSevErroredSecs,
|
|
imaLinkIntervalNeUnavailSecs,
|
|
imaLinkIntervalFeUnavailSecs,
|
|
imaLinkIntervalNeTxUnusableSecs,
|
|
imaLinkIntervalNeRxUnusableSecs,
|
|
imaLinkIntervalFeTxUnusableSecs,
|
|
imaLinkIntervalFeRxUnusableSecs,
|
|
imaLinkIntervalNeTxNumFailures,
|
|
imaLinkIntervalNeRxNumFailures,
|
|
imaLinkIntervalFeTxNumFailures,
|
|
imaLinkIntervalFeRxNumFailures,
|
|
imaLinkIntervalTxStuffs,
|
|
imaLinkIntervalRxStuffs,
|
|
imaLinkTotalImaViolations,
|
|
imaLinkTotalOifAnomalies,
|
|
imaLinkTotalNeSevErroredSecs,
|
|
imaLinkTotalFeSevErroredSecs,
|
|
imaLinkTotalNeUnavailSecs,
|
|
imaLinkTotalFeUnavailSecs,
|
|
imaLinkTotalNeTxUnusableSecs,
|
|
imaLinkTotalNeRxUnusableSecs,
|
|
imaLinkTotalFeTxUnusableSecs,
|
|
imaLinkTotalFeRxUnusableSecs,
|
|
imaLinkTotalNeTxNumFailures,
|
|
imaLinkTotalNeRxNumFailures,
|
|
imaLinkTotalFeTxNumFailures,
|
|
imaLinkTotalFeRxNumFailures,
|
|
imaLinkTotalTxStuffs,
|
|
imaLinkTotalRxStuffs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects containing interval statistics for an IMA link."
|
|
::= { atmfImaMibGroups 7 }
|
|
|
|
imaNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
imaFailureAlarm }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notifications that must be implemented for IMA groups and links."
|
|
::= { atmfImaMibGroups 8 }
|
|
|
|
END
|