Observium_CE/mibs/bintec/BINTEC-MSDP-MIB

903 lines
30 KiB
Plaintext

-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
---------------------------------------------------------------------------
-- $RCSfile: mib-msdp,v $
-- $Revision: 1.8 $
-- $Date: 2011-11-09 13:47:19 $
-- Author: RFC 4624
---------------------------------------------------------------------------
BINTEC-MSDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Gauge32, TimeTicks, Integer32, IpAddress,
mib-2, enterprises FROM SNMPv2-SMI
RowStatus, TruthValue, TimeStamp, DisplayString,
TimeInterval FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
biboip FROM BINTEC-MIB;
msdpMIB MODULE-IDENTITY
LAST-UPDATED "200701080000Z"
ORGANIZATION "IETF MBONED Working Group"
CONTACT-INFO
"Bill Fenner
75 Willow Road
Menlo Park, CA 94025
Phone: +1 650 867 6073
E-mail: fenner@research.att.com
Dave Thaler
One Microsoft Way
Redmond, WA 98052
Phone: +1 425 703 8835
Email: dthaler@microsoft.com
MBONED Working Group: mboned@lists.uoregon.edu"
DESCRIPTION
"An experimental MIB module for MSDP Management and
Monitoring.
Copyright (C) The Internet Society 2006. This version of
this MIB module is part of RFC 4624; see the RFC itself
for full legal notices."
REVISION "200608010000Z"
DESCRIPTION
"Initial version, published as RFC 4624."
REVISION "200701080000Z" -- January 08, 2007
DESCRIPTION
"bintec specific changes."
::= { biboip 56 }
msdpMIBobjects OBJECT IDENTIFIER ::= { msdpMIB 1 }
msdp OBJECT IDENTIFIER ::= { msdpMIBobjects 1 }
msdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of MSDP on this MSDP speaker - globally enabled
or disabled.
Changes to this object should be stored to non-volatile
memory."
DEFVAL { false }
::= { msdp 1 }
msdpCacheLifetime OBJECT-TYPE
SYNTAX
TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lifetime given to SA cache entries when created or
refreshed in seconds. This is the [SG-State-Period] in the MSDP
spec."
REFERENCE "RFC 3618 section 5.3"
DEFVAL { 200 }
::= { msdp 2 }
msdpNumSACacheEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the SA Cache table."
::= { msdp 3 }
msdpRPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Rendezvous Point (RP) address used when sourcing
MSDP SA messages. May be 0.0.0.0 on non-RPs.
Changes to this object should be stored to non-volatile
memory."
::= { msdp 4 }
--
-- The MSDP Peer table
--
msdpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP speaker's peers."
::= { msdp 5 }
msdpPeerEntry OBJECT-TYPE
SYNTAX MsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP peer.
If row creation is supported, dynamically added rows are
added to the system's stable configuration (corresponding
to a StorageType value of nonVolatile). "
INDEX { msdpPeerRemoteAddress }
::= { msdpPeerTable 1 }
MsdpPeerEntry ::= SEQUENCE {
msdpPeerRemoteAddress IpAddress,
msdpPeerState INTEGER,
msdpPeerRPFFailures Counter32,
msdpPeerInSAs Counter32,
msdpPeerOutSAs Counter32,
msdpPeerInSARequests Counter32,
msdpPeerOutSARequests Counter32,
msdpPeerInControlMessages Counter32,
msdpPeerOutControlMessages Counter32,
msdpPeerInDataPackets Counter32,
msdpPeerOutDataPackets Counter32,
msdpPeerFsmEstablishedTransitions Counter32,
msdpPeerFsmEstablishedTime TimeStamp,
msdpPeerInMessageTime TimeStamp,
msdpPeerLocalAddress IpAddress,
msdpPeerConnectRetryInterval Integer32,
msdpPeerHoldTimeConfigured Integer32,
msdpPeerKeepAliveConfigured Integer32,
msdpPeerDataTtl Integer32,
msdpPeerStatus RowStatus,
msdpPeerRemotePort Integer32,
msdpPeerLocalPort Integer32,
msdpPeerEncapsulationType INTEGER,
msdpPeerConnectionAttempts Counter32,
msdpPeerDiscontinuityTime TimeStamp
}
msdpPeerRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote MSDP peer."
::= { msdpPeerEntry 1 }
msdpPeerState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
listen(2),
connecting(3),
established(4),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the MSDP TCP connection with this peer."
DEFVAL { disabled }
::= { msdpPeerEntry 2 }
msdpPeerRPFFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SA messages received from this peer that
failed the Peer-RPF check.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 3 }
msdpPeerInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 4 }
msdpPeerOutSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages transmitted on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 5 }
msdpPeerInSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 6 }
msdpPeerOutSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages transmitted on
this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 7 }
msdpPeerInControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages, excluding encapsulated
data packets, received on this TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 8 }
msdpPeerOutControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages, excluding encapsulated
data packets, transmitted on this TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 9 }
msdpPeerInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets received
from this peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 10 }
msdpPeerOutDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets sent to
this peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 11 }
msdpPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the MSDP FSM transitioned into
the ESTABLISHED state."
REFERENCE "RFC 3618 section 11"
::= { msdpPeerEntry 12 }
msdpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time elapsed since this peer has
transitioned into or out of the ESTABLISHED state."
REFERENCE "RFC 3618 section 11"
::= { msdpPeerEntry 13 }
msdpPeerInMessageTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time elapsed since the last MSDP message was
received from the peer. "
::= { msdpPeerEntry 14 }
msdpPeerLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local IP address used for this entry's MSDP TCP
connection."
::= { msdpPeerEntry 18 }
msdpPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval, in seconds, for the [ConnectRetry-period]
for this peer."
REFERENCE "RFC 3618 section 5.6"
DEFVAL { 30 }
::= { msdpPeerEntry 19 }
msdpPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 (0|3..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval, in seconds, for the [HoldTime-Period]
configured for this MSDP speaker with this peer. If the
value of this object is zero (0), the MSDP connection is
never torn down due to the absence of messages from the
peer."
REFERENCE "RFC 3618 section 5.4"
DEFVAL { 75 }
::= { msdpPeerEntry 20 }
msdpPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Integer32 (0|1..21845)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval, in seconds, for the [KeepAlive-Period]
configured for this MSDP speaker with this peer. If the
value of this object is zero (0), no periodic KEEPALIVE
messages are sent to the peer after the MSDP connection
has been established."
REFERENCE "RFC 3618 section 5.5"
DEFVAL { 60 }
::= { msdpPeerEntry 21 }
msdpPeerDataTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum TTL a packet is required to have before it
may be forwarded using SA encapsulation to this peer."
DEFVAL { 1 }
::= { msdpPeerEntry 22 }
msdpPeerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated.
Care should be used in providing write access to this
object without adequate authentication.
msdpPeerRemoteAddress is the only variable that must be
set to a valid value before the row can be activated.
Since this is the table's INDEX, a row can be activated
by simply setting the msdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1)."
REFERENCE "RFC 3618 section 11.1"
::= { msdpPeerEntry 23 }
msdpPeerRemotePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the MSDP
peers."
DEFVAL { 639 }
::= { msdpPeerEntry 24 }
msdpPeerLocalPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the MSDP
peers."
DEFVAL { 0 }
::= { msdpPeerEntry 25 }
msdpPeerEncapsulationType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
tcp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The encapsulation in use when encapsulating data in SA
messages to this peer."
DEFVAL { tcp }
::= { msdpPeerEntry 26 }
msdpPeerConnectionAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the state machine has transitioned
from INACTIVE to CONNECTING."
::= { msdpPeerEntry 27 }
msdpPeerDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time elapsed since on the most recent occasion at
which one or more of this entry's counters suffered a
discontinuity. See the DESCRIPTION of each object to see
if it is expected to have discontinuities. These
discontinuities may occur at peer connection
establishment."
::= { msdpPeerEntry 28 }
--
-- The MSDP Source-Active Cache table
--
msdpSACacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP SA advertisements
currently in the MSDP speaker's cache."
::= { msdp 6 }
msdpSACacheEntry OBJECT-TYPE
SYNTAX MsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP SA
advertisement. The INDEX to this table includes
msdpSACacheOriginRP for diagnosing incorrect MSDP
advertisements; normally, a Group and Source pair would
be unique.
Row creation is not permitted; msdpSACacheStatus may only
be used to delete rows from this table."
INDEX { msdpSACacheGroupAddr, msdpSACacheSourceAddr,
msdpSACacheOriginRP }
::= { msdpSACacheTable 1 }
MsdpSACacheEntry ::= SEQUENCE {
msdpSACacheGroupAddr IpAddress,
msdpSACacheSourceAddr IpAddress,
msdpSACacheOriginRP IpAddress,
msdpSACachePeerLearnedFrom IpAddress,
msdpSACacheRPFPeer IpAddress,
msdpSACacheInSAs Counter32,
msdpSACacheInDataPackets Counter32,
msdpSACacheUpTime TimeTicks,
msdpSACacheExpiryTime TimeInterval,
msdpSACacheStatus RowStatus
}
msdpSACacheGroupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address of the SA Cache entry."
::= { msdpSACacheEntry 1 }
msdpSACacheSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address of the SA Cache entry."
::= { msdpSACacheEntry 2 }
msdpSACacheOriginRP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RP of the SA Cache entry. This field is in the INDEX
in order to catch multiple RP's advertising the same
source and group."
::= { msdpSACacheEntry 3 }
msdpSACachePeerLearnedFrom OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which this SA Cache entry was last
accepted. This address must correspond to the
msdpPeerRemoteAddress value for a row in the MSDP Peer
Table. This should be 0.0.0.0 on the router that
originated the entry."
::= { msdpSACacheEntry 4 }
msdpSACacheRPFPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which an SA message corresponding to this
cache entry would be accepted (i.e., the RPF peer for
msdpSACacheOriginRP). This may be different than
msdpSACachePeerLearnedFrom if this entry was created by
an MSDP SA-Response. This address must correspond to
the msdpPeerRemoteAddress value for a row in the MSDP
Peer Table, or it may be 0.0.0.0 if no RPF peer exists."
::= { msdpSACacheEntry 5 }
msdpSACacheInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received relevant to this
cache entry. This object must be initialized to zero
when creating a cache entry."
::= { msdpSACacheEntry 6 }
msdpSACacheInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP-encapsulated data packets received
relevant to this cache entry. This object must be
initialized to zero when creating a cache entry."
::= { msdpSACacheEntry 7 }
msdpSACacheUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was first placed in the SA
cache.
The first epoch is the time that the entry was first
placed in the SA cache, and the second epoch is the
current time."
::= { msdpSACacheEntry 8 }
msdpSACacheExpiryTime OBJECT-TYPE
SYNTAX
TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before this entry will expire from
the SA cache.
The first epoch is now, and the second epoch is the time
that the entry will expire."
::= { msdpSACacheEntry 9 }
msdpSACacheStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), destroy(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row in the table. The only allowable
actions are to retrieve the status, which will be
'active', or to set the status to 'destroy' in order to
remove this entry from the cache.
Row creation is not permitted.
No columnar objects are writable, so there are none that
may be changed while the status value is active(1)."
::= { msdpSACacheEntry 10 }
--
-- MSDP Mesh Group Membership table
--
msdpMeshGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpMeshGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing MSDP Mesh Group
configuration."
::= { msdp 7 }
msdpMeshGroupEntry OBJECT-TYPE
SYNTAX MsdpMeshGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a peer in an MSDP
Mesh Group.
If row creation is supported, dynamically added rows are
added to the system's stable configuration
(corresponding to a StorageType value of nonVolatile)."
INDEX { msdpMeshGroupName, msdpMeshGroupPeerAddress }
::= { msdpMeshGroupTable 1 }
MsdpMeshGroupEntry ::= SEQUENCE {
msdpMeshGroupName DisplayString,
msdpMeshGroupPeerAddress IpAddress,
msdpMeshGroupStatus RowStatus
}
msdpMeshGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the mesh group."
::= { msdpMeshGroupEntry 1 }
msdpMeshGroupPeerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A peer address that is a member of the mesh group with
name msdpMeshGroupName. The msdpMeshGroupPeerAddress
must match a row in the msdpPeerTable."
::= { msdpMeshGroupEntry 2 }
msdpMeshGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This entry's status, by which new entries may be added
to the table and old entries deleted.
msdpMeshGroupName and msdpMeshGroupPeerAddress must be
set to valid values before the row can be activated.
Since these are the table's INDEX, a row can be activated
by simply setting the msdpMeshGroupStatus variable.
It is not possible to modify other columns in the same
conceptual row when the status value is active(1),
because the only other objects in the row are part of the
INDEX. Changing one of these changes the row, so an old
row must be deleted and a new one created."
::= { msdpMeshGroupEntry 3 }
-- Traps
msdpTraps OBJECT IDENTIFIER ::= { msdp 0 }
msdpEstablished NOTIFICATION-TYPE
OBJECTS { msdpPeerFsmEstablishedTransitions }
STATUS current
DESCRIPTION
"The MSDP Established event is generated when the MSDP FSM
enters the ESTABLISHED state."
::= { msdpTraps 1 }
msdpBackwardTransition NOTIFICATION-TYPE
OBJECTS { msdpPeerState }
STATUS current
DESCRIPTION
"The MSDPBackwardTransition Event is generated when the
MSDP FSM moves from a higher-numbered state to a
lower-numbered state."
::= { msdpTraps 2 }
-- conformance information
msdpMIBConformance OBJECT IDENTIFIER ::= { msdp 8 }
msdpMIBCompliances OBJECT IDENTIFIER ::= { msdpMIBConformance 1 }
msdpMIBGroups OBJECT IDENTIFIER ::= { msdpMIBConformance 2 }
-- compliance statements
msdpMIBFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement MSDP
(RFC 3618)."
MODULE -- this module
MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup2,
msdpMIBSACacheGroup, msdpMIBEncapsulationGroup }
GROUP msdpMIBRPGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker sources (as
opposed to forwards) MSDP messages."
GROUP msdpMIBMeshGroupGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker can participate
in MSDP Mesh Groups."
::= { msdpMIBCompliances 2 }
msdpMIBReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement MSDP
(RFC 3618), but do not permit configuration (or only permit
partial configuration) via SNMP."
MODULE -- this module
MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup2,
msdpMIBSACacheGroup, msdpMIBEncapsulationGroup }
GROUP msdpMIBRPGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker sources (as
opposed to forwards) MSDP messages."
GROUP msdpMIBMeshGroupGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker can participate
in MSDP Mesh Groups."
OBJECT msdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpCacheLifetime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerLocalAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerConnectRetryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerHoldTimeConfigured
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerKeepAliveConfigured
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerDataTtl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpPeerEncapsulationType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpSACacheStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpRPAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT msdpMeshGroupStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { msdpMIBCompliances 3 }
-- units of conformance
msdpMIBGlobalsGroup OBJECT-GROUP
OBJECTS { msdpEnabled }
STATUS current
DESCRIPTION
"A collection of objects providing information on global MSDP
state."
::= { msdpMIBGroups 1 }
msdpMIBEncapsulationGroup OBJECT-GROUP
OBJECTS { msdpPeerInDataPackets, msdpPeerOutDataPackets,
msdpPeerDataTtl,
msdpPeerEncapsulationType
}
STATUS current
DESCRIPTION
"A collection of objects for managing encapsulations if the
MSDP encapsulation interfaces are not given interface
indices."
::= { msdpMIBGroups 2 }
msdpMIBSACacheGroup OBJECT-GROUP
OBJECTS { msdpCacheLifetime, msdpNumSACacheEntries,
msdpSACachePeerLearnedFrom,
msdpSACacheRPFPeer, msdpSACacheInSAs,
msdpSACacheInDataPackets,
msdpSACacheUpTime, msdpSACacheExpiryTime,
msdpSACacheStatus }
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP SA cache entries."
::= { msdpMIBGroups 3 }
msdpMIBNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { msdpEstablished,
msdpBackwardTransition }
STATUS current
DESCRIPTION
"A collection of notifications for signaling changes in MSDP
peer relationships."
::= { msdpMIBGroups 4 }
msdpMIBRPGroup OBJECT-GROUP
OBJECTS { msdpRPAddress }
STATUS current
DESCRIPTION
"A collection of objects for MSDP speakers that source MSDP
messages."
::= { msdpMIBGroups 5 }
msdpMIBMeshGroupGroup OBJECT-GROUP
OBJECTS { msdpMeshGroupStatus }
STATUS current
DESCRIPTION
"A collection of objects for MSDP speakers that can
participate in MSDP mesh groups."
::= { msdpMIBGroups 6 }
msdpMIBPeerGroup2 OBJECT-GROUP
OBJECTS { msdpPeerRPFFailures,
msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs,
msdpPeerInSARequests, msdpPeerOutSARequests,
msdpPeerInControlMessages, msdpPeerOutControlMessages,
msdpPeerFsmEstablishedTransitions,
msdpPeerFsmEstablishedTime,
msdpPeerLocalAddress,
msdpPeerRemotePort, msdpPeerLocalPort,
msdpPeerConnectRetryInterval,
msdpPeerHoldTimeConfigured,
msdpPeerKeepAliveConfigured,
msdpPeerInMessageTime,
msdpPeerConnectionAttempts,
msdpPeerStatus,
msdpPeerDiscontinuityTime
}
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP peers."
::= { msdpMIBGroups 7 }
END