7771 lines
241 KiB
Plaintext
7771 lines
241 KiB
Plaintext
-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- (C)opyright 2006-2014 bintec elmeg GmbH
|
|
-- $RCSfile: mib-wlan,v $
|
|
-- $Revision: 1.80 $
|
|
-- $Date: 2014-05-09 13:07:25 $
|
|
-- $Revision: 1.80 $
|
|
-- $Date: 2014-05-09 13:07:25 $
|
|
---------------------------------------------------------------------------
|
|
|
|
BIANCA-BRICK-WIRELESS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress, enterprises
|
|
FROM RFC1155-SMI
|
|
MacAddress, DisplayString
|
|
FROM SNMPv2-TC
|
|
bibo, wlan, BitValue, Date, HexValue
|
|
FROM BINTEC-MIB
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Counter64,
|
|
TimeTicks, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
TruthValue, RowStatus
|
|
FROM SNMPv2-TC
|
|
|
|
ifIndex FROM IF-MIB
|
|
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
wlanMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201405090000Z"
|
|
ORGANIZATION "bintec elmeg GmbH"
|
|
CONTACT-INFO
|
|
"EMail: info@bintec-elmeg.com
|
|
Web: www.bintec-elmeg.com
|
|
"
|
|
DESCRIPTION
|
|
"MIB for wlan subsystem"
|
|
REVISION "200611260000Z"
|
|
DESCRIPTION
|
|
"Wireless LAN MIB."
|
|
REVISION "200901290000Z"
|
|
DESCRIPTION
|
|
"Add 5,8 GHz band support."
|
|
REVISION "201202150000Z"
|
|
DESCRIPTION
|
|
"Change Default SSID from Funkwerk-ec to default."
|
|
REVISION "201209260000Z"
|
|
DESCRIPTION
|
|
"Introduced wlanVSSAuthTable."
|
|
REVISION "201303040000Z"
|
|
DESCRIPTION
|
|
"Introduced airtime fairness, band steering and
|
|
blacklisting."
|
|
REVISION "201308010000Z"
|
|
DESCRIPTION
|
|
"WLAN bridge link functionality added."
|
|
::= { bibo 59 }
|
|
|
|
|
|
-- Interfaces Group
|
|
|
|
-- Management Information for the WLAN Subsystem
|
|
|
|
-- **********************************************************************
|
|
-- * Textual conventions
|
|
-- **********************************************************************
|
|
WlanRSSI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to represent receiver input levels in dBm."
|
|
SYNTAX INTEGER (-110..0)
|
|
|
|
WlanRate ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to represent WLAN data rates in 500 Kbps units."
|
|
SYNTAX INTEGER (0..600)
|
|
|
|
-- **********************************************************************
|
|
-- * wlanIfTable TABLE
|
|
-- **********************************************************************
|
|
wlanIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanIfTable contains information relating to the
|
|
interfaces available on the system. Each entry corresponds to
|
|
an available WLAN interface. Entries cannot be added or
|
|
deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when a new WLAN module is installed.
|
|
|
|
Deleting entries: Entries are removed by the system
|
|
after the appropriate WLAN module is removed."
|
|
::= { wlan 1 }
|
|
|
|
wlanIfEntry OBJECT-TYPE
|
|
SYNTAX WlanIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanIfIndex }
|
|
::= { wlanIfTable 1 }
|
|
|
|
WlanIfEntry ::=
|
|
SEQUENCE {
|
|
-- configuration
|
|
wlanIfIndex INTEGER,
|
|
wlanIfType INTEGER,
|
|
wlanIfMode INTEGER,
|
|
wlanIfSpeed INTEGER,
|
|
wlanIfChannel INTEGER,
|
|
|
|
|
|
|
|
wlanIfSkipChannels24Ghz BITS,
|
|
wlanIfSkipChannels5Ghz BITS,
|
|
wlanIfRtsThreshold INTEGER,
|
|
wlanIfTxPower INTEGER,
|
|
|
|
wlanIfAntennaRx INTEGER,
|
|
wlanIfAntennaTx INTEGER,
|
|
|
|
wlanIfBand INTEGER,
|
|
wlanIfBurst INTEGER,
|
|
|
|
wlanIfRxThreshold INTEGER,
|
|
wlanIfAntennaDiversity INTEGER,
|
|
wlanIfTimeout INTEGER,
|
|
wlanIfCWmin INTEGER,
|
|
wlanIfCWmax INTEGER,
|
|
wlanIfPerfOptions BITS,
|
|
wlanIfStaTimeout Counter32,
|
|
wlanIfWMMParam INTEGER,
|
|
|
|
wlanIfCountry DisplayString,
|
|
wlanIfAddress MacAddress,
|
|
wlanIfAckWindow INTEGER,
|
|
wlanIfStaMaxPolls Counter32,
|
|
wlanIfRealChannel INTEGER,
|
|
-- statistics
|
|
wlanIfRxPackets Counter32,
|
|
wlanIfRxBytes Counter32,
|
|
wlanIfRxErrors Counter32,
|
|
wlanIfRxDecryptionError Counter32,
|
|
wlanIfRxRejected Counter32,
|
|
wlanIfTxPackets Counter32,
|
|
wlanIfTxBytes Counter32,
|
|
wlanIfTxErrors Counter32,
|
|
wlanIfTxDropped Counter32,
|
|
wlanIfMSDUTxErrors Counter32,
|
|
wlanIfMSDURxErrors Counter32,
|
|
wlanIfOperState TruthValue,
|
|
wlanIfAssociated Counter32,
|
|
wlanIfNoise WlanRSSI,
|
|
wlanIfRadioNumber INTEGER
|
|
}
|
|
|
|
wlanIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique radio index."
|
|
::= { wlanIfEntry 1 }
|
|
|
|
-- configuration
|
|
|
|
wlanIfType OBJECT-TYPE
|
|
SYNTAX INTEGER { off(1), access-point(2), client(3), wds-only(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WLAN physical interface type
|
|
off(1) interface disabled
|
|
access-point(2) access point
|
|
client(3) client mode
|
|
wds-only(4) wireless distribution system
|
|
"
|
|
DEFVAL { off }
|
|
::= { wlanIfEntry 2 }
|
|
|
|
wlanIfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
m802-11b(1),
|
|
m802-11g(2),
|
|
m802-11mixed(3),
|
|
m802-11mixed-long(4),
|
|
m802-11mixed-short(5),
|
|
m802-11a(6),
|
|
m802-11bgn(7),
|
|
m802-11gn(8),
|
|
m802-11n(10),
|
|
m802-11an(11),
|
|
m802-11abg(12),
|
|
m802-11abgn(13),
|
|
m802-11agn(14)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mixed and compatibility modes between various 802.11 substandards.."
|
|
DEFVAL { m802-11mixed }
|
|
::= { wlanIfEntry 3 }
|
|
|
|
wlanIfSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
s1mbit(1),
|
|
s2mbit(2),
|
|
s5mbit(3),
|
|
s6mbit(4),
|
|
s9mbit(5),
|
|
s11mbit(6),
|
|
s12mbit(7),
|
|
s18mbit(8),
|
|
s24mbit(9),
|
|
s36mbit(10),
|
|
s48mbit(11),
|
|
s54mbit(12),
|
|
|
|
sMCS0-HT(13),
|
|
sMCS1-HT(14),
|
|
sMCS2-HT(15),
|
|
sMCS3-HT(16),
|
|
sMCS4-HT(17),
|
|
sMCS5-HT(18),
|
|
sMCS6-HT(19),
|
|
sMCS7-HT(20),
|
|
sMCS8-HT(21),
|
|
sMCS9-HT(22),
|
|
sMCS10-HT(23),
|
|
sMCS11-HT(24),
|
|
sMCS12-HT(25),
|
|
sMCS13-HT(26),
|
|
sMCS14-HT(27),
|
|
sMCS15-HT(28),
|
|
|
|
auto(31)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value defines the bitrate or the coding scheme to use for data frames.
|
|
auto(31) enables automatic rate adaption."
|
|
DEFVAL { s54mbit }
|
|
::= { wlanIfEntry 4 }
|
|
|
|
wlanIfChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical channel "
|
|
DEFVAL { 6 }
|
|
::= { wlanIfEntry 5 }
|
|
|
|
wlanIfRtsThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of octets in an
|
|
MPDU, below which an RTS/CTS handshake shall not be
|
|
performed, except as RTS/CTS is used as a cross modulation
|
|
protection mechanism. An RTS/CTS
|
|
handshake shall be performed at the beginning of any frame
|
|
exchange sequence where the MPDU is of type Data or
|
|
Management, the MPDU has an individual address in the
|
|
Address1 field, and the length of the MPDU is greater than
|
|
this threshold. Setting this attribute to be larger than the
|
|
maximum MSDU size shall have the effect of turning off the
|
|
RTS/CTS handshake for frames of Data or Management type
|
|
transmitted by this STA. Setting this attribute to one
|
|
shall have the effect of turning on the RTS/CTS handshake
|
|
for all frames of Data or Management type transmitted by
|
|
this STA. The default value of this attribute shall be
|
|
2347."
|
|
DEFVAL { 2347 }
|
|
::= { wlanIfEntry 6 }
|
|
|
|
wlanIfRxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { wlanIfEntry 7 }
|
|
|
|
wlanIfTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitter output power in dBm."
|
|
DEFVAL { 20 }
|
|
::= { wlanIfEntry 8 }
|
|
|
|
wlanIfAntennaRx OBJECT-TYPE
|
|
SYNTAX INTEGER { right(1), left(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current antenna being used to receive."
|
|
DEFVAL { right }
|
|
::= { wlanIfEntry 9 }
|
|
|
|
wlanIfAntennaTx OBJECT-TYPE
|
|
SYNTAX INTEGER { right(1), left(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current antenna being used to transmit."
|
|
DEFVAL { right }
|
|
::= { wlanIfEntry 10 }
|
|
|
|
wlanIfAntennaDiversity OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), rx(2), tx(3), rxtx(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
DEFVAL { rx }
|
|
::= { wlanIfEntry 11 }
|
|
|
|
wlanIfTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station Timeout in minutes."
|
|
DEFVAL { 5 }
|
|
::= { wlanIfEntry 12 }
|
|
|
|
wlanIfBurst OBJECT-TYPE
|
|
SYNTAX INTEGER { off(1), compat(2), ideal(3), max(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sending wireless frames without backoff time."
|
|
DEFVAL { compat }
|
|
::= { wlanIfEntry 13 }
|
|
|
|
-- obsolete wlanIfMaxSTA OBJECT-TYPE ::= { wlanIfEntry 14 }
|
|
-- obsolete wlanIfMaxBSS OBJECT-TYPE ::= { wlanIfEntry 15 }
|
|
|
|
wlanIfCountry OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute identifies the country in which the station is operating.
|
|
The first two octets of this string is the two character country code as
|
|
described in document ISO/IEC 3166-1. The third octet shall be one of the
|
|
following:
|
|
1. an ASCII space character, if the regulations under which the
|
|
station is operating encompass all environments in the country,
|
|
2. an ASCII 'O' character, if the regulations under which the
|
|
station is operating are for an Outdoor environment only, or
|
|
3. an ASCII 'I' character, if the regulations under which the
|
|
station is operating are for an Indoor environment only."
|
|
DEFVAL { "DE " }
|
|
::= { wlanIfEntry 16 }
|
|
|
|
wlanIfAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The MAC Address of the AP "
|
|
::= { wlanIfEntry 17 }
|
|
|
|
-- ::= { wlanIfEntry 18 } this OID is obsolete
|
|
|
|
wlanIfBand OBJECT-TYPE
|
|
SYNTAX INTEGER { b24-GHz(1), b5-GHz(2), b58-GHz(3), b24-5-GHz(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Frequency band "
|
|
DEFVAL { b24-GHz }
|
|
::= { wlanIfEntry 19 }
|
|
|
|
wlanIfAckWindow OBJECT-TYPE
|
|
SYNTAX INTEGER (0..199)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional 802.11 ACK timeout in microseconds.
|
|
This must be set to non-zero value for radio distances
|
|
larger than about 700m.
|
|
Recommended setting is about 10 microseconds per kilometer."
|
|
DEFVAL { 0 }
|
|
::= { wlanIfEntry 20 }
|
|
|
|
wlanIfRealChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actually selected channel for transmit and receive.
|
|
In most cases this is the same value as wlanIfChannel,
|
|
except if automatic channel selection is active. In this
|
|
case, this variable shows the channel in use."
|
|
DEFVAL { 6 }
|
|
::= { wlanIfEntry 21 }
|
|
|
|
wlanIfCWmin OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum size of contention window.
|
|
See also 9.2.4 of IEEE 802.11.
|
|
This value must be a power of 2 minus 1."
|
|
DEFVAL { 15 }
|
|
::= { wlanIfEntry 22 }
|
|
|
|
wlanIfCWmax OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum size of contention window.
|
|
See also 9.2.4 of IEEE 802.11.
|
|
This value must be a power of 2 minus 1."
|
|
DEFVAL { 1023 }
|
|
::= { wlanIfEntry 23 }
|
|
|
|
-- ::= { wlanIfEntry 24 } this OID is obsolete
|
|
|
|
wlanIfPerfOptions OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
nitroXMFrameCompression(0),
|
|
nitroXMFrameConcatenation(1),
|
|
nitroXMPiggybackAck(2),
|
|
nitroXMDirectLink(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds a collection of radio-dependant,
|
|
proprietary performance enhancement options.
|
|
Currently defined options are:
|
|
nitroXMFrameCompression(0)
|
|
This option enables software compression of data
|
|
frame contents. This is only available on
|
|
Conexant-based chipsets, and is only effective with
|
|
Conexant-based clients.
|
|
nitroXMFrameConcatenation(1)
|
|
This option enabled concatenation of short
|
|
data frames into large ones. This is only available
|
|
on Conexant-based chipsets.
|
|
nitroXMPiggybackAck(2)
|
|
This option allows ACK frames to be transmitted
|
|
piggyback with data frames. This is only available
|
|
on Conexant-based chipsets.
|
|
nitroXMDirectLink(3)
|
|
This option enables direct data transfer between two
|
|
associated clients. This is only available on
|
|
Conexant-based chipsets, and is only effective with
|
|
Conexant-based clients."
|
|
DEFVAL { { nitroXMDirectLink, nitroXMPiggybackAck, nitroXMFrameConcatenation } }
|
|
::= { wlanIfEntry 25 }
|
|
|
|
wlanIfStaTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "s"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds without any incoming traffic before
|
|
associated STAs are polled for presence.
|
|
If the STA fails to respond to wlanIfStaMaxPolls
|
|
consecutive polls, it will be forcefully disassociated
|
|
and removed from wlanStationTable."
|
|
DEFVAL { 15 }
|
|
::= { wlanIfEntry 26 }
|
|
|
|
wlanIfStaMaxPolls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times associated STAs are polled for presence.
|
|
If the STA fails to respond to wlanIfStaMaxPolls
|
|
consecutive polls, it will be forcefully disassociated
|
|
and removed from wlanStationTable."
|
|
DEFVAL { 3 }
|
|
::= { wlanIfEntry 27 }
|
|
|
|
wlanIfWMMParam OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WWM status 1=enable, 2=disable, access category parameters
|
|
could be changed in wLanWMMTable."
|
|
DEFVAL { disabled }
|
|
::= { wlanIfEntry 28 }
|
|
|
|
wlanIfSkipChannels24Ghz OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
channel-1(0),
|
|
channel-2(1),
|
|
channel-3(2),
|
|
channel-4(3),
|
|
channel-5(4),
|
|
channel-6(5),
|
|
channel-7(6),
|
|
channel-8(7),
|
|
channel-9(8),
|
|
channel-10(9),
|
|
channel-11(10),
|
|
channel-12(11),
|
|
channel-13(12),
|
|
channel-14(13)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" If a bit is set the accordingly channel will be skipped from
|
|
the channel scan list (channel 1-14 for 2.4 GHz).
|
|
Default is scan all channels. "
|
|
DEFVAL { { } }
|
|
::= { wlanIfEntry 29 }
|
|
|
|
wlanIfSkipChannels5Ghz OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
channel-36(0),
|
|
channel-40(1),
|
|
channel-44(2),
|
|
channel-48(3),
|
|
channel-52(4),
|
|
channel-56(5),
|
|
channel-60(6),
|
|
channel-64(7),
|
|
channel-100(8),
|
|
channel-104(9),
|
|
channel-108(10),
|
|
channel-112(11),
|
|
channel-116(12),
|
|
channel-120(13),
|
|
channel-124(14),
|
|
channel-128(15),
|
|
channel-132(16),
|
|
channel-136(17),
|
|
channel-140(18),
|
|
channel-149(19),
|
|
channel-153(20),
|
|
channel-157(21),
|
|
channel-161(22),
|
|
channel-165(23),
|
|
channel-169(24),
|
|
channel-173(25)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" If a bit is set the accordingly channel will be skipped from
|
|
the channel scan list (channel 36-173 for 5 GHz).
|
|
Default is scan all channels. "
|
|
DEFVAL { { } }
|
|
::= { wlanIfEntry 30 }
|
|
|
|
|
|
-- statistic counter
|
|
wlanIfRxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 65 }
|
|
|
|
|
|
wlanIfRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 66 }
|
|
|
|
wlanIfRxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 67 }
|
|
|
|
|
|
wlanIfRxDecryptionError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 68 }
|
|
|
|
wlanIfRxRejected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 69 }
|
|
|
|
wlanIfTxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 70 }
|
|
|
|
|
|
wlanIfTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 71 }
|
|
|
|
wlanIfTxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 72 }
|
|
|
|
|
|
wlanIfTxDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 73 }
|
|
|
|
|
|
wlanIfMSDUTxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 74 }
|
|
|
|
wlanIfMSDURxErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 75 }
|
|
|
|
wlanIfAssociated OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlanIfEntry 76 }
|
|
|
|
wlanIfOperState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute reflects the operational state of
|
|
the corresponding WLAN card."
|
|
DEFVAL { false }
|
|
::= { wlanIfEntry 77 }
|
|
|
|
-- obsolete wlanIfMaxVSS OBJECT-TYPE ::= { wlanIfEntry 78 }
|
|
-- obsolete wlanIfMaxWDS OBJECT-TYPE ::= { wlanIfEntry 79 }
|
|
-- obsolete wlanIfMaxClient OBJECT-TYPE ::= { wlanIfEntry 80 }
|
|
|
|
wlanIfNoise OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm, or
|
|
0 when this value is not available.
|
|
It's the value measured during the last reception of data."
|
|
DEFVAL { 0 }
|
|
::= { wlanIfEntry 81 }
|
|
|
|
wlanIfRadioNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio number used in user interfaces and for labeling."
|
|
DEFVAL { 0 }
|
|
::= { wlanIfEntry 82 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanIfTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanVSSTable TABLE
|
|
-- **********************************************************************
|
|
wlanVSSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanVSSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Describes a WLAN VSS and the correspondending
|
|
settings"
|
|
::= { wlan 2 }
|
|
|
|
wlanVSSEntry OBJECT-TYPE
|
|
SYNTAX WlanVSSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanVSSwlanIf }
|
|
::= { wlanVSSTable 1 }
|
|
|
|
WlanVSSEntry ::=
|
|
SEQUENCE {
|
|
wlanVSSIndex INTEGER,
|
|
wlanVSSIfIndex INTEGER,
|
|
wlanVSSwlanIf INTEGER,
|
|
wlanVSSId DisplayString,
|
|
wlanVSSAdminStatus INTEGER,
|
|
wlanVSSSecurity INTEGER,
|
|
wlanVSSDefaultKey INTEGER,
|
|
wlanVSSKey1 OCTET STRING,
|
|
wlanVSSKey2 OCTET STRING,
|
|
wlanVSSKey3 OCTET STRING,
|
|
wlanVSSKey4 OCTET STRING,
|
|
wlanVSSTotal INTEGER,
|
|
wlanVSSMAC INTEGER,
|
|
wlanVSSLocal INTEGER,
|
|
wlanVSSHidden INTEGER,
|
|
wlanVSSWPAMulticastCipher BitValue,
|
|
wlanVSSRSNMulticastCipher BitValue,
|
|
wlanVSSWPAUnicastCipher BitValue,
|
|
wlanVSSRSNUnicastCipher BitValue,
|
|
wlanVSSRsnPreauthentication INTEGER,
|
|
wlanVSSBSSID MacAddress,
|
|
wlanVSSWMMEnabled TruthValue,
|
|
wlanVSSIgmpSnooping INTEGER,
|
|
wlanVSSRSNCapabilities INTEGER,
|
|
wlanVSSWpaMixedMode INTEGER,
|
|
wlanVSSARPProcessing TruthValue,
|
|
wlanVSSPolicies INTEGER,
|
|
wlanVSSInvoked INTEGER,
|
|
wlanVSSExunencrypted INTEGER,
|
|
|
|
-- statistics
|
|
wlanVSSMSDUTx Counter32,
|
|
wlanVSSMSDURx Counter32,
|
|
wlanVSSBytesTx Counter32,
|
|
wlanVSSBytesRx Counter32,
|
|
wlanVSSTxMcAirtime Counter64,
|
|
wlanVSSRxAirtime Counter64,
|
|
wlanVSSTxUcAirtime Counter64,
|
|
wlanVSSCurrent INTEGER
|
|
}
|
|
|
|
wlanVSSIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique VSS index of an Broadcast VSS."
|
|
DEFVAL { 0 }
|
|
::= { wlanVSSEntry 1 }
|
|
|
|
-- ::= { wlanVSSEntry 2 } this OID is obsolete
|
|
|
|
wlanVSSIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex for this service set."
|
|
DEFVAL { 0 }
|
|
::= { wlanVSSEntry 3 }
|
|
|
|
wlanVSSwlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio index the VSS belongs to."
|
|
::= { wlanVSSEntry 4 }
|
|
|
|
|
|
wlanVSSId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute reflects the Service Set ID used
|
|
in the DesiredSSID parameter of the most recent
|
|
MLME_Scan.request."
|
|
DEFVAL { "default" }
|
|
::= { wlanVSSEntry 5 }
|
|
|
|
|
|
wlanVSSAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2), delete(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the requested VSS."
|
|
DEFVAL { disable }
|
|
::= { wlanVSSEntry 6 }
|
|
|
|
|
|
wlanVSSSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), wep40(2), wep104(3), wpa-psk(4),
|
|
wpa(5), wpa2(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Security Option which will be used.
|
|
wep40 and wep104:= WEP-Authentication
|
|
wpa-psk := WPA-Authentication with PSK
|
|
wpa := WPA-Authentication with radius (802.1X)
|
|
wpa2 := OBSOLETE and not used anymore!
|
|
"
|
|
DEFVAL { none }
|
|
::= { wlanVSSEntry 7 }
|
|
|
|
wlanVSSPolicies OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Policies of the Broadcast VSS.
|
|
Applicable:
|
|
DOT11_MLMEPOLICY_PRIVACYREQUIRED
|
|
DOT11_MLMEPOLICY_PRIVACYCAPABILITY
|
|
DOT11_MLMEPOLICY_ALLOWUNENCRYPTEDBCAST
|
|
DOT11_MLMEPOLICY_PRIVACYCAPDIRECTED
|
|
DOT11_MLMEPOLICY_UNENCRYPTEDBCAST
|
|
DOT11_MLMEPOLICY_PRIVACYREFUSED
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { wlanVSSEntry 10 }
|
|
|
|
wlanVSSInvoked OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), enable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Privacy Invoke Setting"
|
|
DEFVAL { none }
|
|
::= { wlanVSSEntry 11 }
|
|
|
|
wlanVSSExunencrypted OBJECT-TYPE
|
|
SYNTAX INTEGER { never(1), always(2), dynamic(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Privacy Invoke Setting"
|
|
DEFVAL { never }
|
|
::= { wlanVSSEntry 12 }
|
|
|
|
wlanVSSDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default key for WEP encryption."
|
|
DEFVAL { key1 }
|
|
::= { wlanVSSEntry 13 }
|
|
|
|
wlanVSSKey1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key no. 1.
|
|
Also used for WPA passphrase"
|
|
DEFVAL { "" }
|
|
::= { wlanVSSEntry 14 }
|
|
|
|
wlanVSSKey2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key no. 2."
|
|
DEFVAL { "" }
|
|
::= { wlanVSSEntry 15 }
|
|
|
|
wlanVSSKey3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key no. 3."
|
|
DEFVAL { "" }
|
|
::= { wlanVSSEntry 16 }
|
|
|
|
wlanVSSKey4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key no. 4."
|
|
DEFVAL { "" }
|
|
::= { wlanVSSEntry 17 }
|
|
|
|
|
|
wlanVSSTotal OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of allowed clients of the requested VSS."
|
|
DEFVAL { 32 }
|
|
::= { wlanVSSEntry 18 }
|
|
|
|
-- ::= { wlanVSSEntry 19 } this OID is obsolete
|
|
|
|
wlanVSSMAC OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" MAC Media Access Control via MAC Address"
|
|
DEFVAL { disable }
|
|
::= { wlanVSSEntry 20 }
|
|
|
|
wlanVSSLocal OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Routing between connected Clients "
|
|
DEFVAL { enable }
|
|
::= { wlanVSSEntry 21 }
|
|
|
|
wlanVSSHidden OBJECT-TYPE
|
|
SYNTAX INTEGER { no(1), yes(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Define whether SSID is hidden (yes(2)) or not (no(2)).
|
|
Default value is 'no(1)'."
|
|
DEFVAL { no }
|
|
::= { wlanVSSEntry 22 }
|
|
|
|
-- statistic counters
|
|
|
|
wlanVSSCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of current associated stations"
|
|
::= { wlanVSSEntry 24 }
|
|
|
|
wlanVSSMSDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets transmitted on this VSS."
|
|
::= { wlanVSSEntry 25 }
|
|
|
|
wlanVSSMSDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets received by this VSS."
|
|
::= { wlanVSSEntry 26 }
|
|
|
|
wlanVSSBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted Bytes"
|
|
::= { wlanVSSEntry 27 }
|
|
|
|
wlanVSSBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received Bytes"
|
|
::= { wlanVSSEntry 28 }
|
|
|
|
wlanVSSWPAMulticastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast ciphers used for WPA.
|
|
Only one of the following values is allowed:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
Only one of the bits may be set to indicate
|
|
the WPA group cipher to be used."
|
|
DEFVAL { 4 }
|
|
::= { wlanVSSEntry 29 }
|
|
|
|
wlanVSSRSNMulticastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast ciphers used for RSN.
|
|
Only one of the following values is allowed:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
Only one of the bits may be set to indicate
|
|
the RSN group cipher to be used."
|
|
DEFVAL { 4 }
|
|
::= { wlanVSSEntry 30 }
|
|
|
|
wlanVSSWPAUnicastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of unicast ciphers used for WPA.
|
|
set one or more of the following bit values:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
One or more bits may be set to indicate the available pairwise ciphers."
|
|
DEFVAL { 8 }
|
|
::= { wlanVSSEntry 31 }
|
|
|
|
wlanVSSRSNUnicastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of unicast ciphers used for RSN.
|
|
set one or more of the following bit values:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
One or more bits may be set to indicate the available pairwise ciphers."
|
|
DEFVAL { 16 }
|
|
::= { wlanVSSEntry 32 }
|
|
|
|
wlanVSSRSNCapabilities OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acccording to IEEE 802.11-2007 Section 7.3.2.25.3:
|
|
The RSN Capabilities field indicates requested or advertised capabilities.
|
|
The value of each of the RSN Capabilities fields
|
|
shall be taken to be 0 if the RSN Capabilities field
|
|
is not available in the RSN information element.
|
|
|
|
The length of the RSN Capabilities field is 2 octets.
|
|
The format of the RSN Capabilities field is illustrated in
|
|
IEEE 802.11-2007 Figure 7-74"
|
|
DEFVAL { 0 }
|
|
::= { wlanVSSEntry 34 }
|
|
|
|
wlanVSSWpaMixedMode OBJECT-TYPE
|
|
SYNTAX INTEGER { wpa(1), wpa2(2), wpaandwpa2(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allowed mixed operation of WPA and WPA2 by value wpaandwpa2(3)
|
|
(default value).
|
|
For tightened security, wpa2(2) can be selected.
|
|
The value wpa(1) is available for some older clients with drivers
|
|
that are unable to deal with WPA2 information elements."
|
|
DEFVAL { wpaandwpa2 }
|
|
::= { wlanVSSEntry 35 }
|
|
|
|
wlanVSSRsnPreauthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to TRUE, this shall indicate that RSNA
|
|
preauthentication is enabled on this entity.
|
|
This object requires that dot11RSNAEnabled also be set to TRUE."
|
|
DEFVAL { enable }
|
|
::= { wlanVSSEntry 36 }
|
|
|
|
wlanVSSBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the actual current BSSID for the service set."
|
|
::= { wlanVSSEntry 37 }
|
|
|
|
wlanVSSWMMEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines whether WMM (Wi-Fi Multimedia)
|
|
is active for this service set.
|
|
Depending on the WLAN hardware and driver, WMM might
|
|
only be allowed for one service set, i.e. enabling WMM for one
|
|
service set disables WMM for all other service sets."
|
|
DEFVAL { true }
|
|
::= { wlanVSSEntry 38 }
|
|
|
|
wlanVSSTxMcAirtime OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accumulated estimated time in microseconds for all
|
|
broadcast/multicast frames transmitted."
|
|
::= { wlanVSSEntry 39 }
|
|
|
|
wlanVSSRxAirtime OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accumulated estimated time in microseconds for all
|
|
unidirectional frames received from all stations."
|
|
::= { wlanVSSEntry 40 }
|
|
|
|
wlanVSSTxUcAirtime OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accumulated estimated time in microseconds for all
|
|
unidirectional frames transmitted to all stations."
|
|
::= { wlanVSSEntry 41 }
|
|
|
|
wlanVSSARPProcessing OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines whether ARP processing
|
|
is active for this service set or not.
|
|
ARP processing is a feature to reduce the number
|
|
of ARP broadcast packets. If the AP finds the
|
|
requested IP address in the node table it exchanges
|
|
the broadcast MAC address by the unicast MAC address
|
|
of the client.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanVSSEntry 42 }
|
|
|
|
|
|
wlanVSSIgmpSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(1), enabled(2),
|
|
enabled-no-mac-translation(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the mode off IGMP Snooping.
|
|
disabled(1) means that IGMP Snooping is off and therefore
|
|
all multicast is sent out. In mode enabled(2) multicast traffic
|
|
is converted to unicast if a station has joined the traffic's
|
|
multicast group via IGMP and therefor sent out to only this
|
|
station. In mode enabled_no_mac_translation(3) multicast traffic
|
|
is also only sent out if a station has joined the corresponding
|
|
mcast group BUT isn't converted to unicast.
|
|
Default is disabled(1)."
|
|
DEFVAL { disabled }
|
|
::= { wlanVSSEntry 43 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanVSSTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanWDSTable TABLE
|
|
-- **********************************************************************
|
|
wlanWDSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanWDSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describe a WLAN WDS and the corresponding settings."
|
|
::= { wlan 3 }
|
|
|
|
wlanWDSEntry OBJECT-TYPE
|
|
SYNTAX WlanWDSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WDS Link Configuration"
|
|
INDEX { wlanWDSAddress }
|
|
::= { wlanWDSTable 1 }
|
|
|
|
WlanWDSEntry ::=
|
|
SEQUENCE {
|
|
wlanWDSIndex INTEGER,
|
|
wlanWDSIfIndex INTEGER,
|
|
wlanWDSwlanIf INTEGER,
|
|
wlanWDSAdminStatus INTEGER,
|
|
wlanWDSAddress MacAddress,
|
|
wlanWDSPrivacyMode INTEGER,
|
|
wlanWDSOperStatus TruthValue,
|
|
wlanWDSPrivacyAutoKey INTEGER,
|
|
wlanWDSLinkAliasName OCTET STRING,
|
|
wlanWDSDefaultKey INTEGER,
|
|
wlanWDSPassPhrase OCTET STRING,
|
|
wlanWDSKey1 OCTET STRING,
|
|
wlanWDSKey2 OCTET STRING,
|
|
wlanWDSKey3 OCTET STRING,
|
|
wlanWDSKey4 OCTET STRING,
|
|
wlanWDSTransientKey OCTET STRING,
|
|
wlanWDSLocalAddress MacAddress
|
|
,
|
|
-- statistics
|
|
wlanWDSMSDUTx Counter32,
|
|
wlanWDSMSDURx Counter32,
|
|
wlanWDSBytesTx Counter32,
|
|
wlanWDSBytesRx Counter32,
|
|
wlanWDSCurrentRate WlanRate,
|
|
wlanWDSCurrentRSSI WlanRSSI,
|
|
wlanWDSCurrentRSSI1 WlanRSSI,
|
|
wlanWDSCurrentRSSI2 WlanRSSI,
|
|
wlanWDSCurrentRSSI3 WlanRSSI,
|
|
wlanWDSCurrentNoise WlanRSSI,
|
|
wlanWDSTimeoutCount Counter32,
|
|
wlanWDSRxFrames54 Counter32,
|
|
wlanWDSRxFrames48 Counter32,
|
|
wlanWDSRxFrames36 Counter32,
|
|
wlanWDSRxFrames24 Counter32,
|
|
wlanWDSRxFrames18 Counter32,
|
|
wlanWDSRxFrames12 Counter32,
|
|
wlanWDSRxFrames11 Counter32,
|
|
wlanWDSRxFrames9 Counter32,
|
|
wlanWDSRxFrames6 Counter32,
|
|
wlanWDSRxFrames5 Counter32,
|
|
wlanWDSRxFrames2 Counter32,
|
|
wlanWDSRxFrames1 Counter32,
|
|
wlanWDSTxFrames54 Counter32,
|
|
wlanWDSTxFrames48 Counter32,
|
|
wlanWDSTxFrames36 Counter32,
|
|
wlanWDSTxFrames24 Counter32,
|
|
wlanWDSTxFrames18 Counter32,
|
|
wlanWDSTxFrames12 Counter32,
|
|
wlanWDSTxFrames11 Counter32,
|
|
wlanWDSTxFrames9 Counter32,
|
|
wlanWDSTxFrames6 Counter32,
|
|
wlanWDSTxFrames5 Counter32,
|
|
wlanWDSTxFrames2 Counter32,
|
|
wlanWDSTxFrames1 Counter32
|
|
}
|
|
|
|
wlanWDSIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index of a WDS link "
|
|
DEFVAL { 0 }
|
|
::= { wlanWDSEntry 1 }
|
|
|
|
wlanWDSIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the WDS."
|
|
DEFVAL { 0 }
|
|
::= { wlanWDSEntry 2 }
|
|
|
|
wlanWDSwlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the Interface the WDS belongs to."
|
|
::= { wlanWDSEntry 3 }
|
|
|
|
wlanWDSAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2), delete(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the requested WDS."
|
|
DEFVAL { disable }
|
|
::= { wlanWDSEntry 4 }
|
|
|
|
wlanWDSAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the WDS partner."
|
|
::= { wlanWDSEntry 5 }
|
|
|
|
wlanWDSPrivacyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
-- wep40default(2),
|
|
-- wep104default(3),
|
|
wep40(4),
|
|
wep104(5),
|
|
tkip(6),
|
|
aes(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute selects privacy mode to use for a
|
|
WDS link. Privacy is immediately enabled if anything
|
|
different from 'none' is selected and an appropriate
|
|
key has been set.
|
|
For wep40default(2) or wep104default(3) privacy, the
|
|
default WEP keys are used, which are shared between
|
|
all WDS links on a radio module."
|
|
DEFVAL { none }
|
|
::= { wlanWDSEntry 6 }
|
|
|
|
wlanWDSPrivacyAutoKey OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing any non-zero value to this attribute triggers
|
|
automatic bridge privacy setup.
|
|
Depending on wlanWDSPrivacyMode, a pseudo-random
|
|
WEP key or passphrase is generated.
|
|
If non-empty keys have previously been set, writing
|
|
this attribute has no effect.
|
|
Reading this attribute always retuns 0."
|
|
DEFVAL { 0 }
|
|
::= { wlanWDSEntry 7 }
|
|
|
|
wlanWDSLinkAliasName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..13))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute can be used to set a textual alias
|
|
name for this bridge link. Default is 'wl?_br?',
|
|
where first '?' is radio number and second '?'
|
|
is link number on this radio."
|
|
::= { wlanWDSEntry 8 }
|
|
|
|
wlanWDSOperStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows if the bridge link
|
|
connection is currently operative."
|
|
::= { wlanWDSEntry 9 }
|
|
|
|
wlanWDSDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of the WEP key to use for
|
|
encryption of outgoing WDS frames."
|
|
DEFVAL { key1 }
|
|
::= { wlanWDSEntry 10 }
|
|
|
|
wlanWDSKey1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..13))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 1.
|
|
Allowed number of octets are 5 for WEP-40 and 13 for WEP-104."
|
|
DEFVAL { "" }
|
|
::= { wlanWDSEntry 11 }
|
|
|
|
wlanWDSKey2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..13))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 2.
|
|
Allowed number of octets are 5 for WEP-40 and 13 for WEP-104."
|
|
DEFVAL { "" }
|
|
::= { wlanWDSEntry 12 }
|
|
|
|
wlanWDSKey3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..13))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 3.
|
|
Allowed number of octets are 5 for WEP-40 and 13 for WEP-104."
|
|
DEFVAL { "" }
|
|
::= { wlanWDSEntry 13 }
|
|
|
|
wlanWDSKey4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..13))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 4.
|
|
Allowed number of octets are 5 for WEP-40 and 13 for WEP-104."
|
|
DEFVAL { "" }
|
|
::= { wlanWDSEntry 14 }
|
|
|
|
wlanWDSPassPhrase OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Passphrase string for WDS encryption type TKIP and AES."
|
|
DEFVAL { "" }
|
|
::= { wlanWDSEntry 15 }
|
|
|
|
wlanWDSMSDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets transmitted on this WDS link."
|
|
::= { wlanWDSEntry 17 }
|
|
|
|
wlanWDSMSDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets received on this WDS link."
|
|
::= { wlanWDSEntry 18 }
|
|
|
|
wlanWDSBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
octets transmitted on this WDS link."
|
|
::= { wlanWDSEntry 19 }
|
|
|
|
wlanWDSBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
octets received on this WDS link."
|
|
::= { wlanWDSEntry 20 }
|
|
|
|
wlanWDSCurrentRate OBJECT-TYPE
|
|
SYNTAX WlanRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute returns the current receive data rate
|
|
for this link in 500 Kbps units, or 0 if no connection can be established."
|
|
::= { wlanWDSEntry 21 }
|
|
|
|
wlanWDSCurrentRSSI OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute returns the current receive signal strength
|
|
for this link, or 0 if no connection can be established."
|
|
::= { wlanWDSEntry 22 }
|
|
|
|
wlanWDSCurrentNoise OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm, or
|
|
0 if no connection can be established."
|
|
::= { wlanWDSEntry 23 }
|
|
|
|
wlanWDSTransientKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(16..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transient key generated from Passphrase string for WDS encryption type TKIP and AES."
|
|
::= { wlanWDSEntry 24 }
|
|
|
|
wlanWDSLocalAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local MAC Address for the WDS link."
|
|
::= { wlanWDSEntry 25 }
|
|
|
|
wlanWDSTimeoutCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter increments every second if no packets are
|
|
received from link partner.
|
|
If a certain threshold is reached, an ArbopAnnounceLinkUp
|
|
packet is transmitted in order to resynchronize the bridge partners."
|
|
::= { wlanWDSEntry 26 }
|
|
|
|
wlanWDSRxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 54 Mbps."
|
|
::= { wlanWDSEntry 27 }
|
|
|
|
wlanWDSRxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 48 Mbps."
|
|
::= { wlanWDSEntry 28 }
|
|
|
|
wlanWDSRxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 36 Mbps."
|
|
::= { wlanWDSEntry 29 }
|
|
|
|
wlanWDSRxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 24 Mbps."
|
|
::= { wlanWDSEntry 30 }
|
|
|
|
wlanWDSRxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 18 Mbps."
|
|
::= { wlanWDSEntry 31 }
|
|
|
|
wlanWDSRxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 12 Mbps."
|
|
::= { wlanWDSEntry 32 }
|
|
|
|
wlanWDSRxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 11 Mbps."
|
|
::= { wlanWDSEntry 33 }
|
|
|
|
wlanWDSRxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 9 Mbps."
|
|
::= { wlanWDSEntry 34 }
|
|
|
|
wlanWDSRxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 6 Mbps."
|
|
::= { wlanWDSEntry 35 }
|
|
|
|
wlanWDSRxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 5.5 Mbps."
|
|
::= { wlanWDSEntry 36 }
|
|
|
|
wlanWDSRxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 2 Mbps."
|
|
::= { wlanWDSEntry 37 }
|
|
|
|
wlanWDSRxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 1 Mbps."
|
|
::= { wlanWDSEntry 38 }
|
|
|
|
wlanWDSTxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 54 Mbps."
|
|
::= { wlanWDSEntry 39 }
|
|
|
|
wlanWDSTxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 48 Mbps."
|
|
::= { wlanWDSEntry 40 }
|
|
|
|
wlanWDSTxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 36 Mbps."
|
|
::= { wlanWDSEntry 41 }
|
|
|
|
wlanWDSTxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 24 Mbps."
|
|
::= { wlanWDSEntry 42 }
|
|
|
|
wlanWDSTxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 18 Mbps."
|
|
::= { wlanWDSEntry 43 }
|
|
|
|
wlanWDSTxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 12 Mbps."
|
|
::= { wlanWDSEntry 44 }
|
|
|
|
wlanWDSTxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 11 Mbps."
|
|
::= { wlanWDSEntry 45 }
|
|
|
|
wlanWDSTxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 9 Mbps."
|
|
::= { wlanWDSEntry 46 }
|
|
|
|
wlanWDSTxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 6 Mbps."
|
|
::= { wlanWDSEntry 47 }
|
|
|
|
wlanWDSTxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 5.5 Mbps."
|
|
::= { wlanWDSEntry 48 }
|
|
|
|
wlanWDSTxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 2 Mbps."
|
|
::= { wlanWDSEntry 49 }
|
|
|
|
wlanWDSTxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 1 Mbps."
|
|
::= { wlanWDSEntry 50 }
|
|
|
|
wlanWDSCurrentRSSI1 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute returns the current receive signal strength
|
|
on the first receiver for this link, or 0 if no connection
|
|
can be established."
|
|
::= { wlanWDSEntry 51 }
|
|
|
|
wlanWDSCurrentRSSI2 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute returns the current receive signal strength
|
|
on the second receiver for this link, or 0 if no second
|
|
receiver present or no connection can be established."
|
|
::= { wlanWDSEntry 52 }
|
|
|
|
wlanWDSCurrentRSSI3 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute returns the current receive signal strength
|
|
on the third receiver for this link, or 0 if no third
|
|
receiver present or no connection can be established."
|
|
::= { wlanWDSEntry 53 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanWDSTable TABLE
|
|
-- **********************************************************************
|
|
-- ::= { wlan 4 } this OID is obsolete
|
|
|
|
-- **********************************************************************
|
|
-- * wlanStationTable TABLE
|
|
-- **********************************************************************
|
|
wlanStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanStationTable contains information relating to the
|
|
clients currently associated to our access points.
|
|
Each entry corresponds to
|
|
an associated client station (STA).
|
|
Entries cannot be added or deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when a new STA ia associated.
|
|
|
|
Deleting entries: Entries are removed by the system
|
|
whenever an associated STA is removed."
|
|
::= { wlan 5 }
|
|
|
|
wlanStationEntry OBJECT-TYPE
|
|
SYNTAX WlanStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanStationAddress }
|
|
::= { wlanStationTable 1 }
|
|
|
|
WlanStationEntry ::=
|
|
SEQUENCE {
|
|
wlanStationIfIndex INTEGER,
|
|
wlanStationAddress MacAddress,
|
|
wlanStationVSSIndex INTEGER,
|
|
wlanStationState INTEGER,
|
|
wlanStationSecurity INTEGER,
|
|
wlanStationNode INTEGER,
|
|
wlanStationMSDUTx Counter32,
|
|
wlanStationMSDURx Counter32,
|
|
wlanStationBytesRx Counter32,
|
|
wlanStationBytesTx Counter32,
|
|
wlanStationRate WlanRate,
|
|
wlanStationSignal WlanRSSI,
|
|
wlanStationRSSI1 WlanRSSI,
|
|
wlanStationRSSI2 WlanRSSI,
|
|
wlanStationRSSI3 WlanRSSI,
|
|
wlanStationNoise WlanRSSI,
|
|
wlanStationConnectTime Counter32,
|
|
wlanStationTimeoutTStamp Counter32,
|
|
wlanStationTimeoutCount Counter32,
|
|
wlanStationRxFrames54 Counter32,
|
|
wlanStationRxFrames48 Counter32,
|
|
wlanStationRxFrames36 Counter32,
|
|
wlanStationRxFrames24 Counter32,
|
|
wlanStationRxFrames18 Counter32,
|
|
wlanStationRxFrames12 Counter32,
|
|
wlanStationRxFrames11 Counter32,
|
|
wlanStationRxFrames9 Counter32,
|
|
wlanStationRxFrames6 Counter32,
|
|
wlanStationRxFrames5 Counter32,
|
|
wlanStationRxFrames2 Counter32,
|
|
wlanStationRxFrames1 Counter32,
|
|
wlanStationTxFrames54 Counter32,
|
|
wlanStationTxFrames48 Counter32,
|
|
wlanStationTxFrames36 Counter32,
|
|
wlanStationTxFrames24 Counter32,
|
|
wlanStationTxFrames18 Counter32,
|
|
wlanStationTxFrames12 Counter32,
|
|
wlanStationTxFrames11 Counter32,
|
|
wlanStationTxFrames9 Counter32,
|
|
wlanStationTxFrames6 Counter32,
|
|
wlanStationTxFrames5 Counter32,
|
|
wlanStationTxFrames2 Counter32,
|
|
wlanStationTxFrames1 Counter32,
|
|
|
|
wlanStationIpAddress IpAddress,
|
|
wlanStationRxAirtime Counter64,
|
|
wlanStationTxAirtime Counter64,
|
|
wlanStationCapabilities BITS,
|
|
wlanStationLastSeen Date,
|
|
wlanStationRxDiscards Counter32,
|
|
wlanStationTxDiscards Counter32
|
|
}
|
|
|
|
wlanStationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WLAN radio index."
|
|
::= { wlanStationEntry 1 }
|
|
|
|
wlanStationAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the Assigned STA."
|
|
::= { wlanStationEntry 2 }
|
|
|
|
wlanStationVSSIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifindex of the associated Service Set."
|
|
::= { wlanStationEntry 3 }
|
|
|
|
|
|
wlanStationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
associating(2),
|
|
associated(3),
|
|
authenticate(4),
|
|
authenticated(5),
|
|
-- wds(6), this OID is obsolete
|
|
-- ibss(7), this OID is obsolete
|
|
delete(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { none }
|
|
::= { wlanStationEntry 4 }
|
|
|
|
wlanStationSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
wep40(2),
|
|
wep104(3),
|
|
wpa-psk(4),
|
|
wpa(5),
|
|
wpa2(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Security Option of the Station."
|
|
DEFVAL { none }
|
|
::= { wlanStationEntry 5 }
|
|
|
|
wlanStationNode OBJECT-TYPE
|
|
SYNTAX INTEGER { unknown(1), access-point(2), client(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { client }
|
|
::= { wlanStationEntry 6 }
|
|
|
|
-- ::= { wlanStationEntry 7 } this OID is obsolete
|
|
|
|
wlanStationMSDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets transmitted to this station."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 8 }
|
|
|
|
wlanStationMSDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets received from this station."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 9 }
|
|
|
|
wlanStationBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
octets transmitted to this station."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 10 }
|
|
|
|
wlanStationBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
octets received from this station."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 11 }
|
|
|
|
wlanStationRate OBJECT-TYPE
|
|
SYNTAX WlanRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute reflects the data rate of the latest
|
|
packet received from this station, in 500 kbps units."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 12 }
|
|
|
|
wlanStationSignal OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength in dBm."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 13 }
|
|
|
|
wlanStationNoise OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm, or
|
|
0 if no connection can be established."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 14 }
|
|
|
|
wlanStationConnectTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "s"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute records the system uptime at the moment
|
|
the client successfully finished association."
|
|
::= { wlanStationEntry 15 }
|
|
|
|
wlanStationTimeoutTStamp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal time stamp of the most recent STA timeout poll."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 16 }
|
|
|
|
wlanStationTimeoutCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal counter for number of polls sent to the STA without reply."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 17 }
|
|
|
|
wlanStationRxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 54 Mbps."
|
|
::= { wlanStationEntry 30 }
|
|
|
|
wlanStationRxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 48 Mbps."
|
|
::= { wlanStationEntry 31 }
|
|
|
|
wlanStationRxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 36 Mbps."
|
|
::= { wlanStationEntry 32 }
|
|
|
|
wlanStationRxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 24 Mbps."
|
|
::= { wlanStationEntry 33 }
|
|
|
|
wlanStationRxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 18 Mbps."
|
|
::= { wlanStationEntry 34 }
|
|
|
|
wlanStationRxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 12 Mbps."
|
|
::= { wlanStationEntry 35 }
|
|
|
|
wlanStationRxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 11 Mbps."
|
|
::= { wlanStationEntry 36 }
|
|
|
|
wlanStationRxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 9 Mbps."
|
|
::= { wlanStationEntry 37 }
|
|
|
|
wlanStationRxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 6 Mbps."
|
|
::= { wlanStationEntry 38 }
|
|
|
|
wlanStationRxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 5.5 Mbps."
|
|
::= { wlanStationEntry 39 }
|
|
|
|
wlanStationRxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 2 Mbps."
|
|
::= { wlanStationEntry 40 }
|
|
|
|
wlanStationRxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 1 Mbps."
|
|
::= { wlanStationEntry 41 }
|
|
|
|
wlanStationTxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 54 Mbps."
|
|
::= { wlanStationEntry 42 }
|
|
|
|
wlanStationTxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 48 Mbps."
|
|
::= { wlanStationEntry 43 }
|
|
|
|
wlanStationTxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 36 Mbps."
|
|
::= { wlanStationEntry 44 }
|
|
|
|
wlanStationTxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 24 Mbps."
|
|
::= { wlanStationEntry 45 }
|
|
|
|
wlanStationTxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 18 Mbps."
|
|
::= { wlanStationEntry 46 }
|
|
|
|
wlanStationTxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 12 Mbps."
|
|
::= { wlanStationEntry 47 }
|
|
|
|
wlanStationTxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 11 Mbps."
|
|
::= { wlanStationEntry 48 }
|
|
|
|
wlanStationTxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 9 Mbps."
|
|
::= { wlanStationEntry 49 }
|
|
|
|
wlanStationTxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 6 Mbps."
|
|
::= { wlanStationEntry 50 }
|
|
|
|
wlanStationTxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 5.5 Mbps."
|
|
::= { wlanStationEntry 51 }
|
|
|
|
wlanStationTxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 2 Mbps."
|
|
::= { wlanStationEntry 52 }
|
|
|
|
wlanStationTxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 1 Mbps."
|
|
::= { wlanStationEntry 53 }
|
|
|
|
wlanStationIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the IP address of the client.
|
|
It is only available if any IP frames have been
|
|
received from the client."
|
|
DEFVAL { '00000000'h }
|
|
::= { wlanStationEntry 54 }
|
|
|
|
wlanStationRSSI1 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength at the
|
|
first receiver in dBm. The value 0 indicates no connection."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 55 }
|
|
|
|
wlanStationRSSI2 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength at the
|
|
second receiver in dBm. The value 0 indicates no connection
|
|
or no second receiver present."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 56 }
|
|
|
|
wlanStationRSSI3 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength at the
|
|
third receiver in dBm. The value 0 indicates no connection
|
|
or no third receiver present."
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 57 }
|
|
|
|
wlanStationRxAirtime OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accumulated estimated time in microseconds for all
|
|
unidirectional frames received from this station."
|
|
::= { wlanStationEntry 82 }
|
|
|
|
wlanStationTxAirtime OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accumulated estimated time in microseconds for all
|
|
unidirectional frames transmitted to this station."
|
|
::= { wlanStationEntry 83 }
|
|
|
|
wlanStationCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
uapsd-vo(0),
|
|
uapsd-vi(1),
|
|
uapsd-bk(2),
|
|
uapsd-be(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field contains supported capabilities of a station.
|
|
uapsd-vo := AC_VO U-APSD Flag enabled
|
|
uapsd-vi := AC_VI U-APSD Flag enabled
|
|
uapsd-bk := AC_BK U-APSD Flag enabled
|
|
uapsd-be := AC_BE U-APSD Flag enabled
|
|
"
|
|
DEFVAL { { } }
|
|
::= { wlanStationEntry 84 }
|
|
|
|
wlanStationLastSeen OBJECT-TYPE
|
|
SYNTAX Date
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timestamp of the last received frame by this Station"
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 85 }
|
|
|
|
wlanStationRxDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of discarded bytes due to bandwidth limitation.
|
|
see wlanVSSStationRxShaping"
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 86 }
|
|
|
|
wlanStationTxDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of discarded bytes due to bandwidth limitation.
|
|
see wlanVSSStationTxShaping"
|
|
DEFVAL { 0 }
|
|
::= { wlanStationEntry 87 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanStationTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanMACTable TABLE
|
|
-- **********************************************************************
|
|
wlanMACTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanMACEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanStationTable contains information relating to the
|
|
interfaces available on the system. Each entry corresponds to
|
|
an available wlan interface. Entries cannot be added or
|
|
deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when a new wlan module is installed.
|
|
|
|
Deleting entries: Entries are removed by the system
|
|
after the appropriate wlan module is removed."
|
|
::= { wlan 6 }
|
|
|
|
wlanMACEntry OBJECT-TYPE
|
|
SYNTAX WlanMACEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanMACAddress }
|
|
::= { wlanMACTable 1 }
|
|
|
|
WlanMACEntry ::=
|
|
SEQUENCE {
|
|
wlanMACAddress OCTET STRING,
|
|
wlanMACIfIndex INTEGER,
|
|
wlanMACRule INTEGER,
|
|
wlanMACMask OCTET STRING
|
|
}
|
|
|
|
wlanMACAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Objects MAC Address "
|
|
DEFVAL { "" }
|
|
::= { wlanMACEntry 1 }
|
|
|
|
wlanMACIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Objects associated WLAN Hardware "
|
|
DEFVAL { "" }
|
|
::= { wlanMACEntry 2 }
|
|
|
|
wlanMACRule OBJECT-TYPE
|
|
SYNTAX INTEGER { accept(1), delete(8) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Rule of the MAC Object "
|
|
DEFVAL { accept }
|
|
::= { wlanMACEntry 3 }
|
|
|
|
wlanMACMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Service Sets associated with this Object max. 256 Bit "
|
|
DEFVAL { "" }
|
|
::= { wlanMACEntry 4 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanMACTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanACLDeniedTable TABLE
|
|
-- **********************************************************************
|
|
wlanACLDeniedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanACLDeniedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains all MAC Addresses of denied clients"
|
|
::= { wlan 7 }
|
|
|
|
wlanACLDeniedEntry OBJECT-TYPE
|
|
SYNTAX WlanACLDeniedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanACLDeniedAddress, wlanACLDeniedIfIndex }
|
|
::= { wlanACLDeniedTable 1 }
|
|
|
|
WlanACLDeniedEntry ::=
|
|
SEQUENCE {
|
|
wlanACLDeniedAddress MacAddress,
|
|
wlanACLDeniedIfIndex INTEGER,
|
|
wlanACLDeniedCount INTEGER,
|
|
wlanACLDeniedAge INTEGER
|
|
}
|
|
|
|
wlanACLDeniedAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of the denied Client"
|
|
::= { wlanACLDeniedEntry 1 }
|
|
|
|
wlanACLDeniedIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Interface the Deniued Address belongs to"
|
|
DEFVAL { 0 }
|
|
::= { wlanACLDeniedEntry 2 }
|
|
|
|
wlanACLDeniedCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of detected denies to this MAC Address"
|
|
DEFVAL { 0 }
|
|
::= { wlanACLDeniedEntry 3 }
|
|
|
|
wlanACLDeniedAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Age of the last MAX-ACCESS"
|
|
DEFVAL { 0 }
|
|
::= { wlanACLDeniedEntry 4 }
|
|
-- **********************************************************************
|
|
-- * End of wlanACLDeniedTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanACLTable TABLE
|
|
-- **********************************************************************
|
|
wlanACLTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanACLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { wlan 8 }
|
|
|
|
wlanACLEntry OBJECT-TYPE
|
|
SYNTAX WlanACLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WLAN Access List based on MAC Addresses"
|
|
INDEX { wlanACLAddress, wlanACLIfIndex }
|
|
::= { wlanACLTable 1 }
|
|
|
|
WlanACLEntry ::=
|
|
SEQUENCE {
|
|
wlanACLAddress MacAddress,
|
|
wlanACLIfIndex INTEGER,
|
|
wlanACLStatus INTEGER
|
|
}
|
|
|
|
wlanACLAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address for the accepted client"
|
|
::= { wlanACLEntry 1 }
|
|
|
|
wlanACLIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VSS Interface the MAC Address belongs"
|
|
DEFVAL { 0 }
|
|
::= { wlanACLEntry 2 }
|
|
|
|
|
|
wlanACLStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2), delete(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Status for the entry (delete)"
|
|
DEFVAL { enable }
|
|
::= { wlanACLEntry 3 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanACLTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanWDSAutoConfigTable TABLE
|
|
-- **********************************************************************
|
|
wlanWDSAutoConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanWDSAutoConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes for artem bridge link auto-configuration."
|
|
::= { wlan 9 }
|
|
|
|
wlanWDSAutoConfigEntry OBJECT-TYPE
|
|
SYNTAX WlanWDSAutoConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in wlanWDSAutoConfigTable."
|
|
INDEX { wlanWDSAutoConfigIfIndex }
|
|
::= { wlanWDSAutoConfigTable 1 }
|
|
|
|
WlanWDSAutoConfigEntry ::=
|
|
SEQUENCE {
|
|
wlanWDSAutoConfigIfIndex INTEGER,
|
|
wlanWDSLinkLockState TruthValue,
|
|
wlanWDSLinkConfigScanState INTEGER
|
|
}
|
|
|
|
wlanWDSAutoConfigIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auxiliary index in wlanWDSAutoConfigTable."
|
|
::= { wlanWDSAutoConfigEntry 99 }
|
|
|
|
wlanWDSLinkLockState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines if the bridge is locked.
|
|
Lock state is common for all bridge links
|
|
using the same radio.
|
|
If the bridge is locked, it cannot be discovered
|
|
by auto-configuration scan, and remote changing of any
|
|
parameters is blocked."
|
|
DEFVAL { false }
|
|
::= { wlanWDSAutoConfigEntry 1 }
|
|
|
|
wlanWDSLinkConfigScanState OBJECT-TYPE
|
|
SYNTAX INTEGER { idle(1), scanning(2), busy(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the current auto-configuration
|
|
state.
|
|
idle(1) - In this state, writing scanning(2) starts an
|
|
auto-configuration scan for bridge link peers.
|
|
State will stay at scanning(2) while the scan
|
|
is in progress. When the scan is finished, the
|
|
results are available in the artemBidgePeersTable.
|
|
scanning(2) - An auto-configuration scan for bridge
|
|
link peers is currently in progress. When scanning
|
|
has finished, the state will automatically
|
|
change back to idle(1).
|
|
busy(3) - An auto-configuration setup is currently in
|
|
progress on this radio module.
|
|
Writing this attribute in any state other than
|
|
idle(1) is silently ignored."
|
|
DEFVAL { idle }
|
|
::= { wlanWDSAutoConfigEntry 2 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanWDSAutoConfigTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanWDSPeersTable TABLE
|
|
-- **********************************************************************
|
|
wlanWDSPeersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanWDSPeersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the results of bridge link
|
|
auto-configuration scans. Each line represents
|
|
a possible link partner."
|
|
::= { wlan 10 }
|
|
|
|
wlanWDSPeersEntry OBJECT-TYPE
|
|
SYNTAX WlanWDSPeersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in wlanWDSPeersTable."
|
|
INDEX { wlanWDSPeerIfIndex, wlanWDSPeerIndex }
|
|
::= { wlanWDSPeersTable 1 }
|
|
|
|
WlanWDSPeersEntry ::=
|
|
SEQUENCE {
|
|
wlanWDSPeerIfIndex INTEGER,
|
|
wlanWDSPeerIndex INTEGER,
|
|
wlanWDSPeerLinkAliasName OCTET STRING,
|
|
wlanWDSPeerCompointName OCTET STRING,
|
|
wlanWDSPeerRSSI WlanRSSI,
|
|
wlanWDSPeerRSSI1 WlanRSSI,
|
|
wlanWDSPeerRSSI2 WlanRSSI,
|
|
wlanWDSPeerRSSI3 WlanRSSI,
|
|
wlanWDSPeerLinkAdminStatus TruthValue,
|
|
wlanWDSPeerLockState TruthValue,
|
|
wlanWDSPeerCompointMacAddress MacAddress,
|
|
wlanWDSPeerRadioMacAddress MacAddress,
|
|
wlanWDSPeerConfigSetupState INTEGER,
|
|
wlanWDSPeerConfigSetupResult INTEGER,
|
|
wlanWDSPeerRemoteIfIndex INTEGER
|
|
}
|
|
|
|
wlanWDSPeerIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auxiliary index in wlanWDSPeersTable."
|
|
::= { wlanWDSPeersEntry 99 }
|
|
|
|
wlanWDSPeerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The auxiliary variable used to identify instances
|
|
of the columnar objects in the wlanWDSPeersTable."
|
|
::= { wlanWDSPeersEntry 1 }
|
|
|
|
wlanWDSPeerLinkAliasName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..13))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the user-defined alias
|
|
name for the peer's bridge link."
|
|
::= { wlanWDSPeersEntry 2 }
|
|
|
|
wlanWDSPeerCompointName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute displays the given node name of the
|
|
peer ComPoint."
|
|
::= { wlanWDSPeersEntry 3 }
|
|
|
|
wlanWDSPeerRSSI OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the receive signal
|
|
strength for the signal received from the peer in dBm."
|
|
::= { wlanWDSPeersEntry 4 }
|
|
|
|
wlanWDSPeerLinkAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows is the peer's bridge
|
|
link is currently enabled."
|
|
::= { wlanWDSPeersEntry 5 }
|
|
|
|
wlanWDSPeerLockState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines if the peer's bridge is locked.
|
|
Lock state is common for all bridge links
|
|
using the same radio.
|
|
If the bridge is locked, it cannot be discovered
|
|
by auto-configuration scan, and changing of any
|
|
parameters is blocked."
|
|
::= { wlanWDSPeersEntry 6 }
|
|
|
|
wlanWDSPeerCompointMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute displays the MAC address
|
|
of the peer ComPoint.
|
|
This is not the WLAN radio's MAC address, but rather
|
|
the MAC address of the first ethernet port."
|
|
::= { wlanWDSPeersEntry 7 }
|
|
|
|
wlanWDSPeerRadioMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute displays the peer's WLAN radio's MAC address."
|
|
::= { wlanWDSPeersEntry 8 }
|
|
|
|
wlanWDSPeerConfigSetupState OBJECT-TYPE
|
|
SYNTAX INTEGER { idle(1), setup(2), busy(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the current auto-configuration
|
|
setup state of the bridge link.
|
|
idle(1) - No auto-configuration is currently in progress.
|
|
In this state, writing any value other than idle(1)
|
|
to this attribute starts auto-configuration of a
|
|
bridge link to the partner defined by the table row.
|
|
The state then automatically changes to setup(1) for
|
|
this peer, and to busy(3) for all other peers.
|
|
setup(2) - Auto-configuration of this bridge link to
|
|
connect to this peer is currently in progress.
|
|
As soon as auto-config setup is finished, the
|
|
state changes back to idle(0). You can check
|
|
whether auto-config setup succeeded by reading
|
|
wlanWDSPeerConfigSetupResult.
|
|
busy(3) - Either the bridge link is currently scanning
|
|
for peers, or auto-configuration setup with another
|
|
peer is currently in progress for this bridge link.
|
|
Writing this attribute in any state other than idle(0)
|
|
returns an error."
|
|
DEFVAL { idle }
|
|
::= { wlanWDSPeersEntry 9 }
|
|
|
|
wlanWDSPeerConfigSetupResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noError(1),
|
|
unknownCommand(2),
|
|
locked(3),
|
|
invalidPortID(4),
|
|
deviceError(5),
|
|
invalidTag(6),
|
|
timeout(7),
|
|
outOfBuffers(8),
|
|
notFound(9),
|
|
internalError(10),
|
|
receivedNAK(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the result after a bridge link
|
|
auto-config setup.
|
|
It is reset whenever a new auto-config setup is triggered."
|
|
DEFVAL { noError }
|
|
::= { wlanWDSPeersEntry 10 }
|
|
|
|
wlanWDSPeerRemoteIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique identifier (port ID or ifIndex) for
|
|
the bridge link on the remote side."
|
|
::= { wlanWDSPeersEntry 11 }
|
|
|
|
wlanWDSPeerRSSI1 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the receive signal
|
|
strength on the first receiver for the signal received
|
|
from the peer in dBm. A value of 0 indicates no
|
|
connection"
|
|
::= { wlanWDSPeersEntry 12 }
|
|
|
|
wlanWDSPeerRSSI2 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the receive signal
|
|
strength on the second receiver for the signal received
|
|
from the peer in dBm. A value of 0 indicates no
|
|
connection or no second receiver present."
|
|
::= { wlanWDSPeersEntry 13 }
|
|
|
|
wlanWDSPeerRSSI3 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the receive signal
|
|
strength on the third receiver for the signal received
|
|
from the peer in dBm. A value of 0 indicates no
|
|
connection or no third receiver present."
|
|
::= { wlanWDSPeersEntry 14 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanWDSPeersTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanLinkTestTable TABLE
|
|
-- **********************************************************************
|
|
wlanLinkTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanLinkTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the link test results for every
|
|
bridge link. Writing any value to the wlanLinkTestUpdate
|
|
attribute triggers transmission of a new link request frame."
|
|
::= { wlan 11 }
|
|
|
|
wlanLinkTestEntry OBJECT-TYPE
|
|
SYNTAX WlanLinkTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in WlanLinkTestEntry."
|
|
INDEX { wlanLinkTestIfIndex }
|
|
::= { wlanLinkTestTable 1 }
|
|
|
|
WlanLinkTestEntry ::=
|
|
SEQUENCE {
|
|
wlanLinkTestIfIndex INTEGER,
|
|
wlanLinkTestSignalLocal WlanRSSI,
|
|
wlanLinkTestSignalRemote WlanRSSI,
|
|
wlanLinkTestNoiseLocal WlanRSSI,
|
|
wlanLinkTestNoiseRemote WlanRSSI,
|
|
wlanLinkTestSNRLocal INTEGER,
|
|
wlanLinkTestSNRRemote INTEGER,
|
|
wlanLinkTestFramesTransmitted Counter32,
|
|
wlanLinkTestFramesReceived Counter32,
|
|
wlanLinkTestFramesLost Counter32,
|
|
wlanLinkTestRateLocal WlanRate,
|
|
wlanLinkTestRateRemote WlanRate,
|
|
wlanLinkTestRxFrames54 Counter32,
|
|
wlanLinkTestRxFrames48 Counter32,
|
|
wlanLinkTestRxFrames36 Counter32,
|
|
wlanLinkTestRxFrames24 Counter32,
|
|
wlanLinkTestRxFrames18 Counter32,
|
|
wlanLinkTestRxFrames12 Counter32,
|
|
wlanLinkTestRxFrames11 Counter32,
|
|
wlanLinkTestRxFrames9 Counter32,
|
|
wlanLinkTestRxFrames6 Counter32,
|
|
wlanLinkTestRxFrames5 Counter32,
|
|
wlanLinkTestRxFrames2 Counter32,
|
|
wlanLinkTestRxFrames1 Counter32,
|
|
wlanLinkTestRxFramesRemote54 Counter32,
|
|
wlanLinkTestRxFramesRemote48 Counter32,
|
|
wlanLinkTestRxFramesRemote36 Counter32,
|
|
wlanLinkTestRxFramesRemote24 Counter32,
|
|
wlanLinkTestRxFramesRemote18 Counter32,
|
|
wlanLinkTestRxFramesRemote12 Counter32,
|
|
wlanLinkTestRxFramesRemote11 Counter32,
|
|
wlanLinkTestRxFramesRemote9 Counter32,
|
|
wlanLinkTestRxFramesRemote6 Counter32,
|
|
wlanLinkTestRxFramesRemote5 Counter32,
|
|
wlanLinkTestRxFramesRemote2 Counter32,
|
|
wlanLinkTestRxFramesRemote1 Counter32,
|
|
wlanLinkTestUpdate INTEGER
|
|
}
|
|
|
|
wlanLinkTestIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auxiliary index in wlanLinkTestTable."
|
|
::= { wlanLinkTestEntry 99 }
|
|
|
|
wlanLinkTestSignalLocal OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength in dBm."
|
|
::= { wlanLinkTestEntry 1 }
|
|
|
|
wlanLinkTestSignalRemote OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal in dBm, as
|
|
measured by remote bridge link partner. Reading
|
|
this attribute triggers transmission of a
|
|
new link request frame."
|
|
::= { wlanLinkTestEntry 2 }
|
|
|
|
wlanLinkTestNoiseLocal OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm."
|
|
::= { wlanLinkTestEntry 3 }
|
|
|
|
wlanLinkTestNoiseRemote OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the noise level in dBm, as
|
|
measured by remote bridge link partner."
|
|
::= { wlanLinkTestEntry 4 }
|
|
|
|
wlanLinkTestSNRLocal OBJECT-TYPE
|
|
SYNTAX INTEGER (0..90)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the calculated Signal
|
|
to Noise ratio in dB."
|
|
::= { wlanLinkTestEntry 5 }
|
|
|
|
wlanLinkTestSNRRemote OBJECT-TYPE
|
|
SYNTAX INTEGER (0..90)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the calculated Signal to Noise
|
|
ratio in dB, as measured by remote bridge link partner."
|
|
::= { wlanLinkTestEntry 6 }
|
|
|
|
wlanLinkTestFramesTransmitted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link test
|
|
frames transmitted."
|
|
::= { wlanLinkTestEntry 7 }
|
|
|
|
wlanLinkTestFramesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link test
|
|
frames successfully received."
|
|
::= { wlanLinkTestEntry 8 }
|
|
|
|
wlanLinkTestFramesLost OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link test frames
|
|
for which no reply has been received and
|
|
therefore are considered lost."
|
|
::= { wlanLinkTestEntry 9 }
|
|
|
|
wlanLinkTestRateLocal OBJECT-TYPE
|
|
SYNTAX WlanRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the data rate of the most
|
|
recent received link test frame, in 500 Kbps units."
|
|
::= { wlanLinkTestEntry 10 }
|
|
|
|
wlanLinkTestRateRemote OBJECT-TYPE
|
|
SYNTAX WlanRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the data rate of the most
|
|
recent link test frame received by the link
|
|
partner, in 500 Kbps units."
|
|
::= { wlanLinkTestEntry 11 }
|
|
|
|
wlanLinkTestRxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 54 Mbps."
|
|
::= { wlanLinkTestEntry 32 }
|
|
|
|
wlanLinkTestRxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 48 Mbps."
|
|
::= { wlanLinkTestEntry 33 }
|
|
|
|
wlanLinkTestRxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 36 Mbps."
|
|
::= { wlanLinkTestEntry 34 }
|
|
|
|
wlanLinkTestRxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 24 Mbps."
|
|
::= { wlanLinkTestEntry 35 }
|
|
|
|
wlanLinkTestRxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 18 Mbps."
|
|
::= { wlanLinkTestEntry 36 }
|
|
|
|
wlanLinkTestRxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 12 Mbps."
|
|
::= { wlanLinkTestEntry 37 }
|
|
|
|
wlanLinkTestRxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 11 Mbps."
|
|
::= { wlanLinkTestEntry 38 }
|
|
|
|
wlanLinkTestRxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 9 Mbps."
|
|
::= { wlanLinkTestEntry 39 }
|
|
|
|
wlanLinkTestRxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 6 Mbps."
|
|
::= { wlanLinkTestEntry 40 }
|
|
|
|
wlanLinkTestRxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 5.5 Mbps."
|
|
::= { wlanLinkTestEntry 41 }
|
|
|
|
wlanLinkTestRxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 2 Mbps."
|
|
::= { wlanLinkTestEntry 42 }
|
|
|
|
wlanLinkTestRxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received at 1 Mbps."
|
|
::= { wlanLinkTestEntry 43 }
|
|
|
|
wlanLinkTestUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing any non-zero value to this attribute
|
|
triggers transmission of a new link request frame.
|
|
Reading this attribute always returns 0."
|
|
::= { wlanLinkTestEntry 50 }
|
|
|
|
wlanLinkTestRxFramesRemote54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 54 Mbps."
|
|
::= { wlanLinkTestEntry 60 }
|
|
|
|
wlanLinkTestRxFramesRemote48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 48 Mbps."
|
|
::= { wlanLinkTestEntry 61 }
|
|
|
|
wlanLinkTestRxFramesRemote36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 36 Mbps."
|
|
::= { wlanLinkTestEntry 62 }
|
|
|
|
wlanLinkTestRxFramesRemote24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 24 Mbps."
|
|
::= { wlanLinkTestEntry 63 }
|
|
|
|
wlanLinkTestRxFramesRemote18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 18 Mbps."
|
|
::= { wlanLinkTestEntry 64 }
|
|
|
|
wlanLinkTestRxFramesRemote12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 12 Mbps."
|
|
::= { wlanLinkTestEntry 65 }
|
|
|
|
wlanLinkTestRxFramesRemote11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 11 Mbps."
|
|
::= { wlanLinkTestEntry 66 }
|
|
|
|
wlanLinkTestRxFramesRemote9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 9 Mbps."
|
|
::= { wlanLinkTestEntry 67 }
|
|
|
|
wlanLinkTestRxFramesRemote6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 6 Mbps."
|
|
::= { wlanLinkTestEntry 68 }
|
|
|
|
wlanLinkTestRxFramesRemote5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 5.5 Mbps."
|
|
::= { wlanLinkTestEntry 69 }
|
|
|
|
wlanLinkTestRxFramesRemote2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 2 Mbps."
|
|
::= { wlanLinkTestEntry 70 }
|
|
|
|
wlanLinkTestRxFramesRemote1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of link
|
|
test frames that were received by the remote
|
|
partner at 1 Mbps."
|
|
::= { wlanLinkTestEntry 71 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanLinkTestTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * WLAN WDS common Bridge configuration Objects
|
|
-- **********************************************************************
|
|
wlanBridge OBJECT IDENTIFIER
|
|
-- wlanBridgeConfigScanTimeout 1
|
|
-- wlanBridgeConfigSetupTimeout 2
|
|
::= { wlan 12 }
|
|
|
|
wlanBridgeConfigScanTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (10..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the maximum time a bridge
|
|
auto-configuration scan may take. After this timeout has
|
|
expired, any auto-configuration scan will be aborted,
|
|
regardless of current state."
|
|
DEFVAL { 120 }
|
|
::= { wlanBridge 1 }
|
|
|
|
wlanBridgeConfigSetupTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (10..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the maximum time a bridge
|
|
auto-configuration setup may take. After this timeout
|
|
has expired, any auto-configuration setup will be aborted,
|
|
regardless of current state.
|
|
In this case, artemBridgePeerConfigSetupResult
|
|
will be set to 'timeout'."
|
|
DEFVAL { 300 }
|
|
::= { wlanBridge 2 }
|
|
|
|
-- **********************************************************************
|
|
-- * wlanClientTable TABLE
|
|
-- **********************************************************************
|
|
wlanClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Describe a WLAN Client and the correspondending
|
|
settings"
|
|
::= { wlan 13 }
|
|
|
|
wlanClientEntry OBJECT-TYPE
|
|
SYNTAX WlanClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanClientwlanIf }
|
|
::= { wlanClientTable 1 }
|
|
|
|
WlanClientEntry ::=
|
|
SEQUENCE {
|
|
wlanClientIndex INTEGER,
|
|
wlanClientIfIndex INTEGER,
|
|
wlanClientwlanIf INTEGER,
|
|
wlanClientMode INTEGER,
|
|
wlanClientSSID DisplayString,
|
|
wlanClient11dConformance INTEGER,
|
|
wlanClientSecurity INTEGER,
|
|
wlanClientDefaultKey INTEGER,
|
|
wlanClientKey1 OCTET STRING,
|
|
wlanClientKey2 OCTET STRING,
|
|
wlanClientKey3 OCTET STRING,
|
|
wlanClientKey4 OCTET STRING,
|
|
wlanClientPassPhrase OCTET STRING,
|
|
wlanClientRsnPreauthentication INTEGER,
|
|
wlanClientBand INTEGER,
|
|
wlanClientRoamingPreference INTEGER,
|
|
wlanClientScanThreshold INTEGER,
|
|
wlanClientScanInterval INTEGER,
|
|
wlanClientChannelSweep INTEGER,
|
|
wlanClientScanPeriodAMin INTEGER,
|
|
wlanClientScanPeriodAMax INTEGER,
|
|
wlanClientScanPeriodMin INTEGER,
|
|
wlanClientScanPeriodMax INTEGER,
|
|
wlanClientWeightOfAssocAdv INTEGER,
|
|
wlanClientWeightOfRSSIAdv INTEGER,
|
|
wlanClientWeightOfAge INTEGER,
|
|
wlanClientWeightOfPenalty INTEGER,
|
|
wlanClientJoinFailedPenalty INTEGER,
|
|
wlanClientSkipChannels BITS,
|
|
wlanClientRoamingProfile INTEGER,
|
|
-- no saves
|
|
wlanClientWPAMulticastCipher BitValue,
|
|
wlanClientRSNMulticastCipher BitValue,
|
|
wlanClientWPAUnicastCipher BitValue,
|
|
wlanClientRSNUnicastCipher BitValue,
|
|
wlanClientScanState INTEGER
|
|
,
|
|
wlanClientRSNCapabilities INTEGER,
|
|
-- statistics
|
|
wlanClientBss MacAddress,
|
|
wlanClientCurrSSID DisplayString,
|
|
wlanClientMSDUTx Counter32,
|
|
wlanClientMSDURx Counter32,
|
|
wlanClientBytesTx Counter32,
|
|
wlanClientBytesRx Counter32,
|
|
wlanClientRate WlanRate,
|
|
wlanClientRSSI WlanRSSI,
|
|
wlanClientRSSI1 WlanRSSI,
|
|
wlanClientRSSI2 WlanRSSI,
|
|
wlanClientRSSI3 WlanRSSI,
|
|
wlanClientNoise WlanRSSI,
|
|
wlanClientRxFrames54 Counter32,
|
|
wlanClientRxFrames48 Counter32,
|
|
wlanClientRxFrames36 Counter32,
|
|
wlanClientRxFrames24 Counter32,
|
|
wlanClientRxFrames18 Counter32,
|
|
wlanClientRxFrames12 Counter32,
|
|
wlanClientRxFrames11 Counter32,
|
|
wlanClientRxFrames9 Counter32,
|
|
wlanClientRxFrames6 Counter32,
|
|
wlanClientRxFrames5 Counter32,
|
|
wlanClientRxFrames2 Counter32,
|
|
wlanClientRxFrames1 Counter32,
|
|
wlanClientTxFrames54 Counter32,
|
|
wlanClientTxFrames48 Counter32,
|
|
wlanClientTxFrames36 Counter32,
|
|
wlanClientTxFrames24 Counter32,
|
|
wlanClientTxFrames18 Counter32,
|
|
wlanClientTxFrames12 Counter32,
|
|
wlanClientTxFrames11 Counter32,
|
|
wlanClientTxFrames9 Counter32,
|
|
wlanClientTxFrames6 Counter32,
|
|
wlanClientTxFrames5 Counter32,
|
|
wlanClientTxFrames2 Counter32,
|
|
wlanClientTxFrames1 Counter32
|
|
}
|
|
|
|
wlanClientIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique Client index."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 1 }
|
|
|
|
wlanClientIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the client interface."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 2 }
|
|
|
|
wlanClientwlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the wlan Interface the client belongs to."
|
|
::= { wlanClientEntry 3 }
|
|
|
|
|
|
wlanClientMode OBJECT-TYPE
|
|
SYNTAX INTEGER { infra(1), ad-hoc(2), delete(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch between infrastructure and ad-hoc mode."
|
|
DEFVAL { infra }
|
|
::= { wlanClientEntry 4 }
|
|
|
|
|
|
wlanClientSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service Set Name"
|
|
::= { wlanClientEntry 5 }
|
|
|
|
wlanClient11dConformance OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), flexible(2), strict(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"none - use own country info
|
|
flexible - try to get country info from an AP else use own country info
|
|
strict - try to get country info from an AP else do nothing"
|
|
DEFVAL { strict }
|
|
::= { wlanClientEntry 6 }
|
|
|
|
wlanClientSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
wep40(2),
|
|
wep104(3),
|
|
wpa-psk(4),
|
|
wpa2-psk(5),
|
|
wpa(6),
|
|
wpa2(7),
|
|
wpa-none(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Security Option which will be used. WPA-NONE is a special
|
|
mode only for Ad-hoc mode. There is no key management that means
|
|
the key is static (calculated from SSID and passphrase)."
|
|
DEFVAL { none }
|
|
::= { wlanClientEntry 7 }
|
|
|
|
wlanClientDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
DEFVAL { key1 }
|
|
::= { wlanClientEntry 8 }
|
|
|
|
wlanClientKey1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 1."
|
|
DEFVAL { "" }
|
|
::= { wlanClientEntry 9 }
|
|
|
|
wlanClientKey2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 2."
|
|
DEFVAL { "" }
|
|
::= { wlanClientEntry 10 }
|
|
|
|
wlanClientKey3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 3."
|
|
DEFVAL { "" }
|
|
::= { wlanClientEntry 11 }
|
|
|
|
wlanClientKey4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key string for WEP key nr. 4."
|
|
DEFVAL { "" }
|
|
::= { wlanClientEntry 12 }
|
|
|
|
wlanClientPassPhrase OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Passphrase string for WPA-PSK and WPA2-PSK."
|
|
DEFVAL { "" }
|
|
::= { wlanClientEntry 13 }
|
|
|
|
wlanClientRsnPreauthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to TRUE, this shall indicate that RSNA
|
|
preauthentication is enabled on this entity.
|
|
This object requires that dot11RSNAEnabled also be set to TRUE."
|
|
DEFVAL { enable }
|
|
::= { wlanClientEntry 14 }
|
|
|
|
wlanClientBand OBJECT-TYPE
|
|
SYNTAX INTEGER { b24-GHz(1), b5-GHz(2), b24-5-GHz(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
" Frequency band "
|
|
::= { wlanClientEntry 15 }
|
|
|
|
wlanClientRoamingPreference OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), b24-GHz(2), b5-GHz(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Which band is prefered for
|
|
association.
|
|
none : no preference (default)
|
|
b24-GHz: prefer APs on 2,4 GHz
|
|
b5-GHz : prefer APs on 5 GHz"
|
|
DEFVAL { none }
|
|
::= { wlanClientEntry 16 }
|
|
|
|
wlanClientScanThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-90..-10)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Threshold in dBm above which the background scan is active.
|
|
Default is -70dBm."
|
|
DEFVAL { -70 }
|
|
::= { wlanClientEntry 17 }
|
|
|
|
wlanClientScanInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (200..50000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Scan interval, in ms, between successive sweeps.
|
|
Default is 5000ms."
|
|
DEFVAL { 5000 }
|
|
::= { wlanClientEntry 18 }
|
|
|
|
wlanClientChannelSweep OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of frequencies to scan for each background scan.
|
|
Sweep = 0 disables background scanning.
|
|
Sweep = -1 causes the sweep to cover all frequencies available.
|
|
Default is a sweep of 2 channels."
|
|
DEFVAL { 2 }
|
|
::= { wlanClientEntry 19 }
|
|
|
|
wlanClientScanPeriodAMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minimum time in ms to spend on a frequency when active
|
|
scanning.
|
|
Default is 10ms."
|
|
DEFVAL { 10 }
|
|
::= { wlanClientEntry 20 }
|
|
|
|
wlanClientScanPeriodAMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Maximum time in ms to spend on a frequency when active
|
|
scanning.
|
|
Default is 40ms."
|
|
DEFVAL { 40 }
|
|
::= { wlanClientEntry 21 }
|
|
|
|
wlanClientScanPeriodMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minimum time in ms to spend on a frequency when passive
|
|
scanning.
|
|
Default is 20ms."
|
|
DEFVAL { 20 }
|
|
::= { wlanClientEntry 22 }
|
|
|
|
wlanClientScanPeriodMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Maximum time in ms to spend on a frequency when passive
|
|
scanning.
|
|
Default is 120ms."
|
|
DEFVAL { 120 }
|
|
::= { wlanClientEntry 23 }
|
|
|
|
wlanClientWeightOfAssocAdv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Advantage of the BSS currently associated with.
|
|
Default is a weight of 10."
|
|
DEFVAL { 10 }
|
|
::= { wlanClientEntry 24 }
|
|
|
|
wlanClientWeightOfRSSIAdv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Weight of the BSS's received signal strength indicator (RSSI).
|
|
Default is a weight of 10."
|
|
DEFVAL { 10 }
|
|
::= { wlanClientEntry 25 }
|
|
|
|
wlanClientWeightOfAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Weight of the BSS's age.
|
|
Default is a weight of 5"
|
|
DEFVAL { 5 }
|
|
::= { wlanClientEntry 26 }
|
|
|
|
wlanClientWeightOfPenalty OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Weight of the BSS's penalty.
|
|
Default is a weigth of 10."
|
|
DEFVAL { 10 }
|
|
::= { wlanClientEntry 27 }
|
|
|
|
wlanClientJoinFailedPenalty OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Penalty when joining an AP failed.
|
|
Default is a penalty value of 50."
|
|
DEFVAL { 50 }
|
|
::= { wlanClientEntry 28 }
|
|
|
|
wlanClientRoamingProfile OBJECT-TYPE
|
|
SYNTAX INTEGER { fast(1), normal(2), slow(3), no(4), custom(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" All roaming parameters are summarized to profiles for
|
|
the most used roaming behaviors.
|
|
fast : client roams if signal is not strong enough for higher data rates
|
|
normal: default roaming parameters
|
|
slow : client roams if signal is weak
|
|
no : client roams only when it is disassociated
|
|
custom: user can change roaming parameter "
|
|
DEFVAL { normal }
|
|
::= { wlanClientEntry 29 }
|
|
|
|
wlanClientSkipChannels OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
channel-1(0),
|
|
channel-2(1),
|
|
channel-3(2),
|
|
channel-4(3),
|
|
channel-5(4),
|
|
channel-6(5),
|
|
channel-7(6),
|
|
channel-8(7),
|
|
channel-9(8),
|
|
channel-10(9),
|
|
channel-11(10),
|
|
channel-12(11),
|
|
channel-13(12),
|
|
channel-14(13)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
" If a bit is set the accordingly channel will be skipped from
|
|
the channel scan list (channel 1-14 for 2.4 GHz).
|
|
Default is scan all channels. "
|
|
DEFVAL { { } }
|
|
::= { wlanClientEntry 30 }
|
|
|
|
wlanClientWPAMulticastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast ciphers used for WPA.
|
|
For WPA and RSN, only one of the following values is allowed:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
WPA_CIPHERSUITE_AES_WRAP(16)
|
|
Only one of the WPA_ and RSN_ bits may be set."
|
|
DEFVAL { 4 }
|
|
::= { wlanClientEntry 33 }
|
|
|
|
wlanClientRSNMulticastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast ciphers used for RSN.
|
|
For WPA and RSN, only one of the following values is allowed:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
WPA_CIPHERSUITE_AES_WRAP(16)
|
|
Only one of the WPA_ and RSN_ bits may be set."
|
|
DEFVAL { 4 }
|
|
::= { wlanClientEntry 34 }
|
|
|
|
wlanClientWPAUnicastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of unicast ciphers used for WPA.
|
|
For WPA and RSN, set one or more of the following bit values:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
WPA_CIPHERSUITE_AES_WRAP(16)
|
|
One or more bits may be set to indicate the available ciphers."
|
|
DEFVAL { 8 }
|
|
::= { wlanClientEntry 35 }
|
|
|
|
wlanClientRSNUnicastCipher OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of unicast ciphers used for RSN.
|
|
For WPA and RSN, set one or more of the following bit values:
|
|
WPA_CIPHERSUITE_NONE(0)
|
|
WPA_CIPHERSUITE_WEP_40(1)
|
|
WPA_CIPHERSUITE_WEP_104(2)
|
|
WPA_CIPHERSUITE_TKIP(4)
|
|
WPA_CIPHERSUITE_AES_CCMP(8)
|
|
WPA_CIPHERSUITE_AES_WRAP(16)
|
|
One or more bits may be set to indicate the available ciphers."
|
|
DEFVAL { 16 }
|
|
::= { wlanClientEntry 36 }
|
|
|
|
wlanClientRSNCapabilities OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RSN capabilities bytes, "
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 37 }
|
|
|
|
wlanClientScanState OBJECT-TYPE
|
|
SYNTAX INTEGER { idle(1), scanning(2), update(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the foreground scanning status.
|
|
Writing scanning(2) in idle state triggers a new
|
|
foreground scan cycle. All entries for this client
|
|
interface in the wlanScanResultsTable are removed.
|
|
When the WLAN client has finished scanning, the attribute
|
|
changes back to idle(1), and the wlanScanResultsTable is
|
|
updated automatically.
|
|
To update wlanScanResultsTable without triggering a new
|
|
foreground scan, you can write update(3) to this attribute.
|
|
This causes wlanScanResultsTable to be updated immedieately,
|
|
reflecting any changes detected by automatic backgound scanning.
|
|
After wlanScanResultsTable is updated, the value switches back
|
|
to state idle(1).
|
|
Any attempt to write different values, or to write values in a
|
|
state different from idle(1), is ignored."
|
|
DEFVAL { idle }
|
|
::= { wlanClientEntry 38 }
|
|
|
|
-- statistic counters
|
|
|
|
wlanClientBss OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BSS Id the client is associated with. If client is not
|
|
associated, this attribute reads 00:00:00:00:00:00."
|
|
::= { wlanClientEntry 64 }
|
|
|
|
wlanClientCurrSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service Set Name the client really is associated with.
|
|
This usually equal to wlanClientSSID, except for empty
|
|
wlanClientSSID, which means any SSID."
|
|
::= { wlanClientEntry 65 }
|
|
|
|
wlanClientMSDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of transmitted MSDU"
|
|
::= { wlanClientEntry 66 }
|
|
|
|
wlanClientMSDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of received MSDU"
|
|
::= { wlanClientEntry 67 }
|
|
|
|
wlanClientBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"total number of transmitted bytes"
|
|
::= { wlanClientEntry 68 }
|
|
|
|
wlanClientBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"total number of received bytes"
|
|
::= { wlanClientEntry 69 }
|
|
|
|
wlanClientRate OBJECT-TYPE
|
|
SYNTAX WlanRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data rate of latest received data frame, in 500 kbps units.
|
|
If client is not associated, this attribute always reads 0."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 70 }
|
|
|
|
wlanClientRSSI OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of latest received data frame."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 71 }
|
|
|
|
wlanClientNoise OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm, or
|
|
0 if no connection can be established."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 72 }
|
|
|
|
wlanClientRxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 54 Mbps."
|
|
::= { wlanClientEntry 73 }
|
|
|
|
wlanClientRxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 48 Mbps."
|
|
::= { wlanClientEntry 74 }
|
|
|
|
wlanClientRxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 36 Mbps."
|
|
::= { wlanClientEntry 75 }
|
|
|
|
wlanClientRxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 24 Mbps."
|
|
::= { wlanClientEntry 76 }
|
|
|
|
wlanClientRxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 18 Mbps."
|
|
::= { wlanClientEntry 77 }
|
|
|
|
wlanClientRxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 12 Mbps."
|
|
::= { wlanClientEntry 78 }
|
|
|
|
wlanClientRxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 11 Mbps."
|
|
::= { wlanClientEntry 79 }
|
|
|
|
wlanClientRxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 9 Mbps."
|
|
::= { wlanClientEntry 80 }
|
|
|
|
wlanClientRxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 6 Mbps."
|
|
::= { wlanClientEntry 81 }
|
|
|
|
wlanClientRxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 5.5 Mbps."
|
|
::= { wlanClientEntry 82 }
|
|
|
|
wlanClientRxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 2 Mbps."
|
|
::= { wlanClientEntry 83 }
|
|
|
|
wlanClientRxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at 1 Mbps."
|
|
::= { wlanClientEntry 84 }
|
|
|
|
wlanClientTxFrames54 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 54 Mbps."
|
|
::= { wlanClientEntry 85 }
|
|
|
|
wlanClientTxFrames48 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 48 Mbps."
|
|
::= { wlanClientEntry 86 }
|
|
|
|
wlanClientTxFrames36 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 36 Mbps."
|
|
::= { wlanClientEntry 87 }
|
|
|
|
wlanClientTxFrames24 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 24 Mbps."
|
|
::= { wlanClientEntry 88 }
|
|
|
|
wlanClientTxFrames18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 18 Mbps."
|
|
::= { wlanClientEntry 89 }
|
|
|
|
wlanClientTxFrames12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 12 Mbps."
|
|
::= { wlanClientEntry 90 }
|
|
|
|
wlanClientTxFrames11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 11 Mbps."
|
|
::= { wlanClientEntry 91 }
|
|
|
|
wlanClientTxFrames9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 9 Mbps."
|
|
::= { wlanClientEntry 92 }
|
|
|
|
wlanClientTxFrames6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 6 Mbps."
|
|
::= { wlanClientEntry 93 }
|
|
|
|
wlanClientTxFrames5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 5.5 Mbps."
|
|
::= { wlanClientEntry 94 }
|
|
|
|
wlanClientTxFrames2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 2 Mbps."
|
|
::= { wlanClientEntry 95 }
|
|
|
|
wlanClientTxFrames1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at 1 Mbps."
|
|
::= { wlanClientEntry 96 }
|
|
|
|
wlanClientRSSI1 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of latest data frame
|
|
received by first receiver.
|
|
A value of 0 inidcates no connection."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 97 }
|
|
|
|
wlanClientRSSI2 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of latest data frame
|
|
received by first receiver.
|
|
A value of 0 inidcates no second receiver
|
|
present or no connection."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 98 }
|
|
|
|
wlanClientRSSI3 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of latest data frame
|
|
received by third receiver.
|
|
A value of 0 inidcates no third receiver
|
|
present or no connection."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientEntry 99 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanClientTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanStatisticsTable TABLE
|
|
-- **********************************************************************
|
|
wlanStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Describe the WLAN statistics of a wlan card"
|
|
::= { wlan 14 }
|
|
|
|
wlanStatisticsEntry OBJECT-TYPE
|
|
SYNTAX WlanStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanStatisticsWlanIf }
|
|
::= { wlanStatisticsTable 1 }
|
|
|
|
WlanStatisticsEntry ::=
|
|
SEQUENCE {
|
|
wlanStatisticsWlanIf INTEGER,
|
|
wlanStatisticsOperation INTEGER,
|
|
|
|
-- statistics
|
|
wlanStatisticsMSDUTxSuccess Counter32,
|
|
wlanStatisticsMSDUTxMulti Counter32,
|
|
wlanStatisticsMSDUTxDropped Counter32,
|
|
wlanStatisticsMSDUTxFailed Counter32,
|
|
wlanStatisticsMPDUTx Counter32,
|
|
wlanStatisticsMPDUTxOneRetry Counter32,
|
|
wlanStatisticsMPDUTxMultiRetry Counter32,
|
|
wlanStatisticsMPDUTxFailed Counter32,
|
|
wlanStatisticsMSDURxSuccess Counter32,
|
|
wlanStatisticsMSDURxMulti Counter32,
|
|
wlanStatisticsMSDURxDropped Counter32,
|
|
wlanStatisticsMSDURxFailed Counter32,
|
|
wlanStatisticsMPDURx Counter32,
|
|
wlanStatisticsMPDURxDups Counter32,
|
|
wlanStatisticsACKFailed Counter32,
|
|
wlanStatisticsFramesRx Counter32,
|
|
wlanStatisticsFrameRxError Counter32,
|
|
wlanStatisticsFrameAborts Counter32,
|
|
wlanStatisticsFrameAbortsPHY Counter32,
|
|
wlanStatisticsPrivTxRejected Counter32,
|
|
wlanStatisticsPrivRxPlain Counter32,
|
|
wlanStatisticsPrivRxFailed Counter32,
|
|
wlanStatisticsPrivRxNoKey Counter32,
|
|
wlanStatisticsRTSSuccess Counter32,
|
|
wlanStatisticsRTSFailed Counter32
|
|
}
|
|
|
|
wlanStatisticsWlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the wlan Interface the statistics belongs to."
|
|
::= { wlanStatisticsEntry 1 }
|
|
|
|
wlanStatisticsOperation OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), refresh(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this variable to 'refresh' initiates a refresh of the
|
|
statistic data. After refreshing it is autonomously changed to
|
|
'none'."
|
|
DEFVAL { none }
|
|
::= { wlanStatisticsEntry 2 }
|
|
|
|
wlanStatisticsMSDUTxSuccess OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully transmitted unicast MSDUs."
|
|
::= { wlanStatisticsEntry 10 }
|
|
|
|
wlanStatisticsMSDUTxMulti OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully transmitted multicast MSDUs."
|
|
::= { wlanStatisticsEntry 11 }
|
|
|
|
wlanStatisticsMSDUTxDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unicast and multicast MSDUs dropped before
|
|
a transmission attempt was made."
|
|
::= { wlanStatisticsEntry 12 }
|
|
|
|
wlanStatisticsMSDUTxFailed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unicast and multicast MSDUs that could not
|
|
be or were not successfully transmitted by the device."
|
|
::= { wlanStatisticsEntry 13 }
|
|
|
|
wlanStatisticsMPDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully transmitted unicast and
|
|
multicast MPDUs."
|
|
::= { wlanStatisticsEntry 14 }
|
|
|
|
wlanStatisticsMPDUTxOneRetry OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unicast MPDUs successfully transmitted
|
|
after one retry."
|
|
::= { wlanStatisticsEntry 15 }
|
|
|
|
wlanStatisticsMPDUTxMultiRetry OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unicast MPDUs successfully transmitted
|
|
after two or more retries."
|
|
::= { wlanStatisticsEntry 16 }
|
|
|
|
wlanStatisticsMPDUTxFailed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unicast MPDUs for which the maximum
|
|
number of retries were exceeded."
|
|
::= { wlanStatisticsEntry 17 }
|
|
|
|
wlanStatisticsMSDURxSuccess OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully received unicast MSDUs."
|
|
::= { wlanStatisticsEntry 18 }
|
|
|
|
wlanStatisticsMSDURxMulti OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully received multicast MSDUs."
|
|
::= { wlanStatisticsEntry 19 }
|
|
|
|
wlanStatisticsMSDURxDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of dropped unicast and multicast MSDUs."
|
|
::= { wlanStatisticsEntry 20 }
|
|
|
|
wlanStatisticsMSDURxFailed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of partially or erroneously received
|
|
unitcast and multicast MSDUs."
|
|
::= { wlanStatisticsEntry 21 }
|
|
|
|
wlanStatisticsMPDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully received unicast MPDUs."
|
|
::= { wlanStatisticsEntry 22 }
|
|
|
|
wlanStatisticsMPDURxDups OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully received unicast MPDUs
|
|
that were a duplicate of earlier frames."
|
|
::= { wlanStatisticsEntry 23 }
|
|
|
|
wlanStatisticsRTSSuccess OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of CTS frames received in response to
|
|
an RTS frame."
|
|
::= { wlanStatisticsEntry 24 }
|
|
|
|
wlanStatisticsRTSFailed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of transmitted RTS frames for which
|
|
no response CTS frame was received."
|
|
::= { wlanStatisticsEntry 25 }
|
|
|
|
wlanStatisticsACKFailed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object counts the number of frame transmissions
|
|
for which an acknowledgment response frame was expected
|
|
but not received."
|
|
::= { wlanStatisticsEntry 26 }
|
|
|
|
wlanStatisticsFramesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successfully received frames, before
|
|
any address and type filtering."
|
|
::= { wlanStatisticsEntry 27 }
|
|
|
|
wlanStatisticsFrameRxError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unsuccessfully received frames."
|
|
::= { wlanStatisticsEntry 28 }
|
|
|
|
wlanStatisticsFrameAborts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of aborted frames."
|
|
::= { wlanStatisticsEntry 29 }
|
|
|
|
wlanStatisticsFrameAbortsPHY OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of PHY aborted frames."
|
|
::= { wlanStatisticsEntry 30 }
|
|
|
|
wlanStatisticsPrivTxRejected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MPDUs that were not transmitted because
|
|
no appropriate privacy configuration was available."
|
|
::= { wlanStatisticsEntry 31 }
|
|
|
|
wlanStatisticsPrivRxPlain OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received MPDUs that were rejected because
|
|
they were unencrypted."
|
|
::= { wlanStatisticsEntry 32 }
|
|
|
|
wlanStatisticsPrivRxFailed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received crypted MPDUs that were rejected
|
|
because they could not be successfully decrypted."
|
|
::= { wlanStatisticsEntry 33 }
|
|
|
|
wlanStatisticsPrivRxNoKey OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received crypted MPDUs that could not be
|
|
decrypted because no key was available for decryption."
|
|
::= { wlanStatisticsEntry 34 }
|
|
-- **********************************************************************
|
|
-- * End of wlanStatisticsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanScanResultsTable TABLE
|
|
-- **********************************************************************
|
|
wlanScanResultsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanScanResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the list of BSS entries found by foreground
|
|
or background scanning in client mode."
|
|
::= { wlan 15 }
|
|
|
|
wlanScanResultsEntry OBJECT-TYPE
|
|
SYNTAX WlanScanResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanScanResultsIfIndex, wlanScanResultsIndex }
|
|
::= { wlanScanResultsTable 1 }
|
|
|
|
WlanScanResultsEntry ::=
|
|
SEQUENCE {
|
|
wlanScanResultsIfIndex INTEGER,
|
|
wlanScanResultsIndex INTEGER,
|
|
wlanScanResultsBSSID MacAddress,
|
|
wlanScanResultsAge INTEGER,
|
|
wlanScanResultsRSSI WlanRSSI,
|
|
wlanScanResultsRSSI1 WlanRSSI,
|
|
wlanScanResultsRSSI2 WlanRSSI,
|
|
wlanScanResultsRSSI3 WlanRSSI,
|
|
wlanScanResultsSSID DisplayString,
|
|
wlanScanResultsChannel INTEGER,
|
|
wlanScanResultsDTIMPeriod INTEGER,
|
|
wlanScanResultsBeaconPeriod INTEGER,
|
|
wlanScanResultsCapInfo INTEGER,
|
|
wlanScanResultsRates OCTET STRING,
|
|
wlanScanResultsBasicRates OCTET STRING,
|
|
wlanScanResultsExtendedRates OCTET STRING,
|
|
wlanScanResultsFrameData OCTET STRING,
|
|
wlanScanResultsType INTEGER,
|
|
wlanScanResultsPrivacy INTEGER,
|
|
wlanScanResultsWPAUnicastCipher BITS,
|
|
wlanScanResultsRSNUnicastCipher BITS,
|
|
wlanScanResultsSignal WlanRSSI
|
|
}
|
|
|
|
wlanScanResultsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex of the WLAN Interface the scan results belong to."
|
|
::= { wlanScanResultsEntry 1 }
|
|
|
|
wlanScanResultsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auxiliary index for different BSS entries."
|
|
::= { wlanScanResultsEntry 2 }
|
|
|
|
wlanScanResultsBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BSSID of this BSS."
|
|
::= { wlanScanResultsEntry 3 }
|
|
|
|
wlanScanResultsAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "TU"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Age of this BSS entry."
|
|
::= { wlanScanResultsEntry 4 }
|
|
|
|
wlanScanResultsRSSI OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of this BSS."
|
|
::= { wlanScanResultsEntry 5 }
|
|
|
|
wlanScanResultsSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSID aka network name of this BSS.
|
|
If broadcasting of SSID is disabled on this
|
|
BSS, this string may be empty."
|
|
::= { wlanScanResultsEntry 6 }
|
|
|
|
wlanScanResultsChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel this BSS was received on."
|
|
::= { wlanScanResultsEntry 7 }
|
|
|
|
wlanScanResultsDTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DTIM intervals between
|
|
the start of CFPs for this BSS."
|
|
::= { wlanScanResultsEntry 8 }
|
|
|
|
wlanScanResultsBeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains the number of TU that this
|
|
BSS uses for scheduling Beacon transmissions."
|
|
::= { wlanScanResultsEntry 9 }
|
|
|
|
wlanScanResultsCapInfo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DTIM intervals between
|
|
the start of CFPs for this BSS."
|
|
::= { wlanScanResultsEntry 10 }
|
|
|
|
wlanScanResultsRates OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
UNITS "TU"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains one octet for each
|
|
supported rate in this BSS, in 500 Kbps units."
|
|
::= { wlanScanResultsEntry 11 }
|
|
|
|
wlanScanResultsBasicRates OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains one octet for each required
|
|
basic rate in this BSS, in 500 Kbps units."
|
|
::= { wlanScanResultsEntry 12 }
|
|
|
|
wlanScanResultsExtendedRates OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains one octet for each supported
|
|
extended rate in this BSS, in 500 Kbps units."
|
|
::= { wlanScanResultsEntry 13 }
|
|
|
|
wlanScanResultsFrameData OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains raw data from 802.11 beacon or
|
|
probe response frames, starting with the 802.11 timestamp."
|
|
::= { wlanScanResultsEntry 14 }
|
|
|
|
wlanScanResultsType OBJECT-TYPE
|
|
SYNTAX INTEGER { access-point(1), ad-hoc(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains the device type of the
|
|
scanned device."
|
|
DEFVAL { access-point }
|
|
::= { wlanScanResultsEntry 15 }
|
|
|
|
wlanScanResultsPrivacy OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1),
|
|
wep(2),
|
|
wpa-psk(3),
|
|
wpaandwpa2-psk(4),
|
|
wpa2-psk(5),
|
|
wpa-enterprise(6),
|
|
wpaandwpa2-enterprise(7),
|
|
wpa2-enterprise(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains the privacy type of the
|
|
scanned device."
|
|
DEFVAL { none }
|
|
::= { wlanScanResultsEntry 16 }
|
|
|
|
wlanScanResultsWPAUnicastCipher OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
cipher-none(0),
|
|
cipher-wep40(1),
|
|
cipher-wep104(2),
|
|
cipher-tkip(3),
|
|
cipher-aes(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains the WPA unicast ciphers of the
|
|
scanned device."
|
|
::= { wlanScanResultsEntry 17 }
|
|
|
|
wlanScanResultsRSNUnicastCipher OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
cipher-none(0),
|
|
cipher-wep40(1),
|
|
cipher-wep104(2),
|
|
cipher-tkip(3),
|
|
cipher-aes(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains the RSN unicast ciphers of the
|
|
scanned device."
|
|
::= { wlanScanResultsEntry 18 }
|
|
|
|
wlanScanResultsRSSI1 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of this BSS at first receiver."
|
|
::= { wlanScanResultsEntry 19 }
|
|
|
|
wlanScanResultsRSSI2 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of this BSS at second receiver.
|
|
A value of 0 indicates no second receiver present."
|
|
::= { wlanScanResultsEntry 20 }
|
|
|
|
wlanScanResultsRSSI3 OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of this BSS at third receiver.
|
|
A value of 0 indicates no third receiver present."
|
|
::= { wlanScanResultsEntry 21 }
|
|
|
|
wlanScanResultsSignal OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive signal strength of this BSS."
|
|
::= { wlanScanResultsEntry 24 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanScanResultsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanStationHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
wlanStationHTStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanStationHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanStationHTStatsTable contains additional statistical
|
|
data about 802.11n HT frames related to the clients
|
|
currently associated to our access points.
|
|
|
|
Each entry corresponds to an wlanStationTable entry.
|
|
Entries cannot be added or deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when a new STA is associated.
|
|
|
|
Deleting entries: Entries are removed by the system
|
|
whenever an associated STA is removed."
|
|
::= { wlan 16 }
|
|
|
|
wlanStationHTStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanStationHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
AUGMENTS { wlanStationEntry }
|
|
::= { wlanStationHTStatsTable 1 }
|
|
|
|
WlanStationHTStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanStationHTStatsRxFramesMCS0 Counter32,
|
|
wlanStationHTStatsRxFramesMCS1 Counter32,
|
|
wlanStationHTStatsRxFramesMCS2 Counter32,
|
|
wlanStationHTStatsRxFramesMCS3 Counter32,
|
|
wlanStationHTStatsRxFramesMCS4 Counter32,
|
|
wlanStationHTStatsRxFramesMCS5 Counter32,
|
|
wlanStationHTStatsRxFramesMCS6 Counter32,
|
|
wlanStationHTStatsRxFramesMCS7 Counter32,
|
|
wlanStationHTStatsRxFramesMCS8 Counter32,
|
|
wlanStationHTStatsRxFramesMCS9 Counter32,
|
|
wlanStationHTStatsRxFramesMCS10 Counter32,
|
|
wlanStationHTStatsRxFramesMCS11 Counter32,
|
|
wlanStationHTStatsRxFramesMCS12 Counter32,
|
|
wlanStationHTStatsRxFramesMCS13 Counter32,
|
|
wlanStationHTStatsRxFramesMCS14 Counter32,
|
|
wlanStationHTStatsRxFramesMCS15 Counter32,
|
|
wlanStationHTStatsRxFramesMCS16 Counter32,
|
|
wlanStationHTStatsRxFramesMCS17 Counter32,
|
|
wlanStationHTStatsRxFramesMCS18 Counter32,
|
|
wlanStationHTStatsRxFramesMCS19 Counter32,
|
|
wlanStationHTStatsRxFramesMCS20 Counter32,
|
|
wlanStationHTStatsRxFramesMCS21 Counter32,
|
|
wlanStationHTStatsRxFramesMCS22 Counter32,
|
|
wlanStationHTStatsRxFramesMCS23 Counter32,
|
|
|
|
wlanStationHTStatsTxFramesMCS0 Counter32,
|
|
wlanStationHTStatsTxFramesMCS1 Counter32,
|
|
wlanStationHTStatsTxFramesMCS2 Counter32,
|
|
wlanStationHTStatsTxFramesMCS3 Counter32,
|
|
wlanStationHTStatsTxFramesMCS4 Counter32,
|
|
wlanStationHTStatsTxFramesMCS5 Counter32,
|
|
wlanStationHTStatsTxFramesMCS6 Counter32,
|
|
wlanStationHTStatsTxFramesMCS7 Counter32,
|
|
wlanStationHTStatsTxFramesMCS8 Counter32,
|
|
wlanStationHTStatsTxFramesMCS9 Counter32,
|
|
wlanStationHTStatsTxFramesMCS10 Counter32,
|
|
wlanStationHTStatsTxFramesMCS11 Counter32,
|
|
wlanStationHTStatsTxFramesMCS12 Counter32,
|
|
wlanStationHTStatsTxFramesMCS13 Counter32,
|
|
wlanStationHTStatsTxFramesMCS14 Counter32,
|
|
wlanStationHTStatsTxFramesMCS15 Counter32,
|
|
wlanStationHTStatsTxFramesMCS16 Counter32,
|
|
wlanStationHTStatsTxFramesMCS17 Counter32,
|
|
wlanStationHTStatsTxFramesMCS18 Counter32,
|
|
wlanStationHTStatsTxFramesMCS19 Counter32,
|
|
wlanStationHTStatsTxFramesMCS20 Counter32,
|
|
wlanStationHTStatsTxFramesMCS21 Counter32,
|
|
wlanStationHTStatsTxFramesMCS22 Counter32,
|
|
wlanStationHTStatsTxFramesMCS23 Counter32,
|
|
wlanStationHTStatsRxBandwidth INTEGER,
|
|
wlanStationHTStatsRxGuardInterval INTEGER,
|
|
wlanStationHTStatsTxBandwidth INTEGER,
|
|
wlanStationHTStatsTxGuardInterval INTEGER
|
|
}
|
|
|
|
wlanStationHTStatsRxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 0."
|
|
::= { wlanStationHTStatsEntry 1 }
|
|
|
|
wlanStationHTStatsRxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 1."
|
|
::= { wlanStationHTStatsEntry 2 }
|
|
|
|
wlanStationHTStatsRxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 2."
|
|
::= { wlanStationHTStatsEntry 3 }
|
|
|
|
wlanStationHTStatsRxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 3."
|
|
::= { wlanStationHTStatsEntry 4 }
|
|
|
|
wlanStationHTStatsRxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 4."
|
|
::= { wlanStationHTStatsEntry 5 }
|
|
|
|
wlanStationHTStatsRxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 5."
|
|
::= { wlanStationHTStatsEntry 6 }
|
|
|
|
wlanStationHTStatsRxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 6."
|
|
::= { wlanStationHTStatsEntry 7 }
|
|
|
|
wlanStationHTStatsRxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 7."
|
|
::= { wlanStationHTStatsEntry 8 }
|
|
|
|
wlanStationHTStatsRxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at MCS 8."
|
|
::= { wlanStationHTStatsEntry 9 }
|
|
|
|
wlanStationHTStatsRxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 9."
|
|
::= { wlanStationHTStatsEntry 10 }
|
|
|
|
wlanStationHTStatsRxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 10."
|
|
::= { wlanStationHTStatsEntry 11 }
|
|
|
|
wlanStationHTStatsRxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 11."
|
|
::= { wlanStationHTStatsEntry 12 }
|
|
|
|
wlanStationHTStatsRxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 12."
|
|
::= { wlanStationHTStatsEntry 13 }
|
|
|
|
wlanStationHTStatsRxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 13."
|
|
::= { wlanStationHTStatsEntry 14 }
|
|
|
|
wlanStationHTStatsRxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 14."
|
|
::= { wlanStationHTStatsEntry 15 }
|
|
|
|
wlanStationHTStatsRxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 15."
|
|
::= { wlanStationHTStatsEntry 16 }
|
|
|
|
wlanStationHTStatsTxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 0."
|
|
::= { wlanStationHTStatsEntry 17 }
|
|
|
|
wlanStationHTStatsTxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 1."
|
|
::= { wlanStationHTStatsEntry 18 }
|
|
|
|
wlanStationHTStatsTxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 2."
|
|
::= { wlanStationHTStatsEntry 19 }
|
|
|
|
wlanStationHTStatsTxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 3."
|
|
::= { wlanStationHTStatsEntry 20 }
|
|
|
|
wlanStationHTStatsTxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 4."
|
|
::= { wlanStationHTStatsEntry 21 }
|
|
|
|
wlanStationHTStatsTxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 5."
|
|
::= { wlanStationHTStatsEntry 22 }
|
|
|
|
wlanStationHTStatsTxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 6."
|
|
::= { wlanStationHTStatsEntry 23 }
|
|
|
|
wlanStationHTStatsTxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 7."
|
|
::= { wlanStationHTStatsEntry 24 }
|
|
|
|
wlanStationHTStatsTxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at MCS 8."
|
|
::= { wlanStationHTStatsEntry 25 }
|
|
|
|
wlanStationHTStatsTxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 9."
|
|
::= { wlanStationHTStatsEntry 26 }
|
|
|
|
wlanStationHTStatsTxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 10."
|
|
::= { wlanStationHTStatsEntry 27 }
|
|
|
|
wlanStationHTStatsTxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 11."
|
|
::= { wlanStationHTStatsEntry 28 }
|
|
|
|
wlanStationHTStatsTxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 12."
|
|
::= { wlanStationHTStatsEntry 29 }
|
|
|
|
wlanStationHTStatsTxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 13."
|
|
::= { wlanStationHTStatsEntry 30 }
|
|
|
|
wlanStationHTStatsTxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 14."
|
|
::= { wlanStationHTStatsEntry 31 }
|
|
|
|
wlanStationHTStatsTxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 15."
|
|
::= { wlanStationHTStatsEntry 32 }
|
|
|
|
wlanStationHTStatsRxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the station
|
|
used with the last received frame: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanStationHTStatsEntry 33 }
|
|
|
|
wlanStationHTStatsRxGuardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the station used with the last received frame:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanStationHTStatsEntry 34 }
|
|
|
|
wlanStationHTStatsTxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the access point
|
|
used for transmitting the last frame: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanStationHTStatsEntry 35 }
|
|
|
|
wlanStationHTStatsTxGuardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the access point used for transmitting the last frame:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanStationHTStatsEntry 36 }
|
|
|
|
wlanStationHTStatsRxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 16."
|
|
::= { wlanStationHTStatsEntry 37 }
|
|
|
|
wlanStationHTStatsRxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 17."
|
|
::= { wlanStationHTStatsEntry 38 }
|
|
|
|
wlanStationHTStatsRxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 18."
|
|
::= { wlanStationHTStatsEntry 39 }
|
|
|
|
wlanStationHTStatsRxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 19."
|
|
::= { wlanStationHTStatsEntry 40 }
|
|
|
|
wlanStationHTStatsRxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 20."
|
|
::= { wlanStationHTStatsEntry 41 }
|
|
|
|
wlanStationHTStatsRxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 21."
|
|
::= { wlanStationHTStatsEntry 42 }
|
|
|
|
wlanStationHTStatsRxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 22."
|
|
::= { wlanStationHTStatsEntry 43 }
|
|
|
|
wlanStationHTStatsRxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 23."
|
|
::= { wlanStationHTStatsEntry 44 }
|
|
|
|
wlanStationHTStatsTxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 16."
|
|
::= { wlanStationHTStatsEntry 45 }
|
|
|
|
wlanStationHTStatsTxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 17."
|
|
::= { wlanStationHTStatsEntry 46 }
|
|
|
|
wlanStationHTStatsTxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 18."
|
|
::= { wlanStationHTStatsEntry 47 }
|
|
|
|
wlanStationHTStatsTxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 19."
|
|
::= { wlanStationHTStatsEntry 48 }
|
|
|
|
wlanStationHTStatsTxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 20."
|
|
::= { wlanStationHTStatsEntry 49 }
|
|
|
|
wlanStationHTStatsTxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 21."
|
|
::= { wlanStationHTStatsEntry 50 }
|
|
|
|
wlanStationHTStatsTxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 22."
|
|
::= { wlanStationHTStatsEntry 51 }
|
|
|
|
wlanStationHTStatsTxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 23."
|
|
::= { wlanStationHTStatsEntry 52 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanStationHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanClientHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
wlanClientHTStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanClientHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanClientHTStatsTable contains additional statistical
|
|
data about 802.11n HT frames related client mode.
|
|
|
|
Each entry corresponds to an wlanClientTable entry.
|
|
Entries cannot be added or deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when WLAN is switched to client mode.
|
|
"
|
|
::= { wlan 17 }
|
|
|
|
wlanClientHTStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanClientHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
AUGMENTS { wlanClientEntry }
|
|
::= { wlanClientHTStatsTable 1 }
|
|
|
|
WlanClientHTStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanClientHTStatsIfIndex INTEGER,
|
|
wlanClientHTStatsRxFramesMCS0 Counter32,
|
|
wlanClientHTStatsRxFramesMCS1 Counter32,
|
|
wlanClientHTStatsRxFramesMCS2 Counter32,
|
|
wlanClientHTStatsRxFramesMCS3 Counter32,
|
|
wlanClientHTStatsRxFramesMCS4 Counter32,
|
|
wlanClientHTStatsRxFramesMCS5 Counter32,
|
|
wlanClientHTStatsRxFramesMCS6 Counter32,
|
|
wlanClientHTStatsRxFramesMCS7 Counter32,
|
|
wlanClientHTStatsRxFramesMCS8 Counter32,
|
|
wlanClientHTStatsRxFramesMCS9 Counter32,
|
|
wlanClientHTStatsRxFramesMCS10 Counter32,
|
|
wlanClientHTStatsRxFramesMCS11 Counter32,
|
|
wlanClientHTStatsRxFramesMCS12 Counter32,
|
|
wlanClientHTStatsRxFramesMCS13 Counter32,
|
|
wlanClientHTStatsRxFramesMCS14 Counter32,
|
|
wlanClientHTStatsRxFramesMCS15 Counter32,
|
|
wlanClientHTStatsRxFramesMCS16 Counter32,
|
|
wlanClientHTStatsRxFramesMCS17 Counter32,
|
|
wlanClientHTStatsRxFramesMCS18 Counter32,
|
|
wlanClientHTStatsRxFramesMCS19 Counter32,
|
|
wlanClientHTStatsRxFramesMCS20 Counter32,
|
|
wlanClientHTStatsRxFramesMCS21 Counter32,
|
|
wlanClientHTStatsRxFramesMCS22 Counter32,
|
|
wlanClientHTStatsRxFramesMCS23 Counter32,
|
|
wlanClientHTStatsTxFramesMCS0 Counter32,
|
|
wlanClientHTStatsTxFramesMCS1 Counter32,
|
|
wlanClientHTStatsTxFramesMCS2 Counter32,
|
|
wlanClientHTStatsTxFramesMCS3 Counter32,
|
|
wlanClientHTStatsTxFramesMCS4 Counter32,
|
|
wlanClientHTStatsTxFramesMCS5 Counter32,
|
|
wlanClientHTStatsTxFramesMCS6 Counter32,
|
|
wlanClientHTStatsTxFramesMCS7 Counter32,
|
|
wlanClientHTStatsTxFramesMCS8 Counter32,
|
|
wlanClientHTStatsTxFramesMCS9 Counter32,
|
|
wlanClientHTStatsTxFramesMCS10 Counter32,
|
|
wlanClientHTStatsTxFramesMCS11 Counter32,
|
|
wlanClientHTStatsTxFramesMCS12 Counter32,
|
|
wlanClientHTStatsTxFramesMCS13 Counter32,
|
|
wlanClientHTStatsTxFramesMCS14 Counter32,
|
|
wlanClientHTStatsTxFramesMCS15 Counter32,
|
|
wlanClientHTStatsTxFramesMCS16 Counter32,
|
|
wlanClientHTStatsTxFramesMCS17 Counter32,
|
|
wlanClientHTStatsTxFramesMCS18 Counter32,
|
|
wlanClientHTStatsTxFramesMCS19 Counter32,
|
|
wlanClientHTStatsTxFramesMCS20 Counter32,
|
|
wlanClientHTStatsTxFramesMCS21 Counter32,
|
|
wlanClientHTStatsTxFramesMCS22 Counter32,
|
|
wlanClientHTStatsTxFramesMCS23 Counter32,
|
|
wlanClientHTStatsRxBandwidth INTEGER,
|
|
wlanClientHTStatsRxGuardInterval INTEGER,
|
|
wlanClientHTStatsTxBandwidth INTEGER,
|
|
wlanClientHTStatsTxGuardInterval INTEGER
|
|
}
|
|
|
|
wlanClientHTStatsRxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 0."
|
|
::= { wlanClientHTStatsEntry 1 }
|
|
|
|
wlanClientHTStatsRxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 1."
|
|
::= { wlanClientHTStatsEntry 2 }
|
|
|
|
wlanClientHTStatsRxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 2."
|
|
::= { wlanClientHTStatsEntry 3 }
|
|
|
|
wlanClientHTStatsRxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 3."
|
|
::= { wlanClientHTStatsEntry 4 }
|
|
|
|
wlanClientHTStatsRxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 4."
|
|
::= { wlanClientHTStatsEntry 5 }
|
|
|
|
wlanClientHTStatsRxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 5."
|
|
::= { wlanClientHTStatsEntry 6 }
|
|
|
|
wlanClientHTStatsRxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 6."
|
|
::= { wlanClientHTStatsEntry 7 }
|
|
|
|
wlanClientHTStatsRxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 7."
|
|
::= { wlanClientHTStatsEntry 8 }
|
|
|
|
wlanClientHTStatsRxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at MCS 8."
|
|
::= { wlanClientHTStatsEntry 9 }
|
|
|
|
wlanClientHTStatsRxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 9."
|
|
::= { wlanClientHTStatsEntry 10 }
|
|
|
|
wlanClientHTStatsRxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 10."
|
|
::= { wlanClientHTStatsEntry 11 }
|
|
|
|
wlanClientHTStatsRxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 11."
|
|
::= { wlanClientHTStatsEntry 12 }
|
|
|
|
wlanClientHTStatsRxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 12."
|
|
::= { wlanClientHTStatsEntry 13 }
|
|
|
|
wlanClientHTStatsRxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 13."
|
|
::= { wlanClientHTStatsEntry 14 }
|
|
|
|
wlanClientHTStatsRxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 14."
|
|
::= { wlanClientHTStatsEntry 15 }
|
|
|
|
wlanClientHTStatsRxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 15."
|
|
::= { wlanClientHTStatsEntry 16 }
|
|
|
|
wlanClientHTStatsTxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 0."
|
|
::= { wlanClientHTStatsEntry 17 }
|
|
|
|
wlanClientHTStatsTxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 1."
|
|
::= { wlanClientHTStatsEntry 18 }
|
|
|
|
wlanClientHTStatsTxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 2."
|
|
::= { wlanClientHTStatsEntry 19 }
|
|
|
|
wlanClientHTStatsTxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 3."
|
|
::= { wlanClientHTStatsEntry 20 }
|
|
|
|
wlanClientHTStatsTxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 4."
|
|
::= { wlanClientHTStatsEntry 21 }
|
|
|
|
wlanClientHTStatsTxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 5."
|
|
::= { wlanClientHTStatsEntry 22 }
|
|
|
|
wlanClientHTStatsTxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 6."
|
|
::= { wlanClientHTStatsEntry 23 }
|
|
|
|
wlanClientHTStatsTxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 7."
|
|
::= { wlanClientHTStatsEntry 24 }
|
|
|
|
wlanClientHTStatsTxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at MCS 8."
|
|
::= { wlanClientHTStatsEntry 25 }
|
|
|
|
wlanClientHTStatsTxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 9."
|
|
::= { wlanClientHTStatsEntry 26 }
|
|
|
|
wlanClientHTStatsTxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 10."
|
|
::= { wlanClientHTStatsEntry 27 }
|
|
|
|
wlanClientHTStatsTxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 11."
|
|
::= { wlanClientHTStatsEntry 28 }
|
|
|
|
wlanClientHTStatsTxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 12."
|
|
::= { wlanClientHTStatsEntry 29 }
|
|
|
|
wlanClientHTStatsTxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 13."
|
|
::= { wlanClientHTStatsEntry 30 }
|
|
|
|
wlanClientHTStatsTxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 14."
|
|
::= { wlanClientHTStatsEntry 31 }
|
|
|
|
wlanClientHTStatsTxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 15."
|
|
::= { wlanClientHTStatsEntry 32 }
|
|
|
|
wlanClientHTStatsRxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the access point
|
|
used with the last received frame: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanClientHTStatsEntry 33 }
|
|
|
|
wlanClientHTStatsRxGuardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the access point used with last received frame:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanClientHTStatsEntry 34 }
|
|
|
|
wlanClientHTStatsTxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the client
|
|
used for transmitting the last frame: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanClientHTStatsEntry 35 }
|
|
|
|
wlanClientHTStatsTxGuardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the client used for transmitting the last frame:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanClientHTStatsEntry 36 }
|
|
|
|
wlanClientHTStatsRxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 16."
|
|
::= { wlanClientHTStatsEntry 37 }
|
|
|
|
wlanClientHTStatsRxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 17."
|
|
::= { wlanClientHTStatsEntry 38 }
|
|
|
|
wlanClientHTStatsRxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 18."
|
|
::= { wlanClientHTStatsEntry 39 }
|
|
|
|
wlanClientHTStatsRxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 19."
|
|
::= { wlanClientHTStatsEntry 40 }
|
|
|
|
wlanClientHTStatsRxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 20."
|
|
::= { wlanClientHTStatsEntry 41 }
|
|
|
|
wlanClientHTStatsRxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 21."
|
|
::= { wlanClientHTStatsEntry 42 }
|
|
|
|
wlanClientHTStatsRxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 22."
|
|
::= { wlanClientHTStatsEntry 43 }
|
|
|
|
wlanClientHTStatsRxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 23."
|
|
::= { wlanClientHTStatsEntry 44 }
|
|
|
|
wlanClientHTStatsTxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 16."
|
|
::= { wlanClientHTStatsEntry 45 }
|
|
|
|
wlanClientHTStatsTxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 17."
|
|
::= { wlanClientHTStatsEntry 46 }
|
|
|
|
wlanClientHTStatsTxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 18."
|
|
::= { wlanClientHTStatsEntry 47 }
|
|
|
|
wlanClientHTStatsTxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 19."
|
|
::= { wlanClientHTStatsEntry 48 }
|
|
|
|
wlanClientHTStatsTxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 20."
|
|
::= { wlanClientHTStatsEntry 49 }
|
|
|
|
wlanClientHTStatsTxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 21."
|
|
::= { wlanClientHTStatsEntry 50 }
|
|
|
|
wlanClientHTStatsTxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 22."
|
|
::= { wlanClientHTStatsEntry 51 }
|
|
|
|
wlanClientHTStatsTxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 23."
|
|
::= { wlanClientHTStatsEntry 52 }
|
|
|
|
wlanClientHTStatsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IfIndex of the client interface."
|
|
DEFVAL { 0 }
|
|
::= { wlanClientHTStatsEntry 53 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanClientHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * wlanWDSHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
wlanWDSHTStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanWDSHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanWDSHTStatsTable contains additional statistical
|
|
data about 802.11n HT frames for WDS links.
|
|
|
|
Each entry corresponds to an wlanWDSTable entry.
|
|
Entries cannot be added or deleted by the user.
|
|
"
|
|
::= { wlan 18 }
|
|
|
|
wlanWDSHTStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanWDSHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
AUGMENTS { wlanWDSEntry }
|
|
::= { wlanWDSHTStatsTable 1 }
|
|
|
|
WlanWDSHTStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanWDSHTStatsRxFramesMCS0 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS1 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS2 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS3 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS4 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS5 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS6 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS7 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS8 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS9 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS10 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS11 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS12 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS13 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS14 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS15 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS16 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS17 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS18 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS19 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS20 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS21 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS22 Counter32,
|
|
wlanWDSHTStatsRxFramesMCS23 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS0 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS1 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS2 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS3 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS4 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS5 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS6 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS7 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS8 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS9 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS10 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS11 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS12 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS13 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS14 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS15 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS16 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS17 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS18 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS19 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS20 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS21 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS22 Counter32,
|
|
wlanWDSHTStatsTxFramesMCS23 Counter32,
|
|
wlanWDSHTStatsRxBandwidth INTEGER,
|
|
wlanWDSHTStatsRxGuardInterval INTEGER,
|
|
wlanWDSHTStatsTxBandwidth INTEGER,
|
|
wlanWDSHTStatsTxGuardInterval INTEGER
|
|
|
|
}
|
|
|
|
wlanWDSHTStatsRxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 0."
|
|
::= { wlanWDSHTStatsEntry 1 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 1."
|
|
::= { wlanWDSHTStatsEntry 2 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 2."
|
|
::= { wlanWDSHTStatsEntry 3 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 3."
|
|
::= { wlanWDSHTStatsEntry 4 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 4."
|
|
::= { wlanWDSHTStatsEntry 5 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 5."
|
|
::= { wlanWDSHTStatsEntry 6 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 6."
|
|
::= { wlanWDSHTStatsEntry 7 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 7."
|
|
::= { wlanWDSHTStatsEntry 8 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at MCS 8."
|
|
::= { wlanWDSHTStatsEntry 9 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 9."
|
|
::= { wlanWDSHTStatsEntry 10 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 10."
|
|
::= { wlanWDSHTStatsEntry 11 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 11."
|
|
::= { wlanWDSHTStatsEntry 12 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 12."
|
|
::= { wlanWDSHTStatsEntry 13 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 13."
|
|
::= { wlanWDSHTStatsEntry 14 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 14."
|
|
::= { wlanWDSHTStatsEntry 15 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 15."
|
|
::= { wlanWDSHTStatsEntry 16 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 0."
|
|
::= { wlanWDSHTStatsEntry 17 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 1."
|
|
::= { wlanWDSHTStatsEntry 18 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 2."
|
|
::= { wlanWDSHTStatsEntry 19 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 3."
|
|
::= { wlanWDSHTStatsEntry 20 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 4."
|
|
::= { wlanWDSHTStatsEntry 21 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 5."
|
|
::= { wlanWDSHTStatsEntry 22 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 6."
|
|
::= { wlanWDSHTStatsEntry 23 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 7."
|
|
::= { wlanWDSHTStatsEntry 24 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at MCS 8."
|
|
::= { wlanWDSHTStatsEntry 25 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 9."
|
|
::= { wlanWDSHTStatsEntry 26 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 10."
|
|
::= { wlanWDSHTStatsEntry 27 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 11."
|
|
::= { wlanWDSHTStatsEntry 28 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 12."
|
|
::= { wlanWDSHTStatsEntry 29 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 13."
|
|
::= { wlanWDSHTStatsEntry 30 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 14."
|
|
::= { wlanWDSHTStatsEntry 31 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 15."
|
|
::= { wlanWDSHTStatsEntry 32 }
|
|
|
|
wlanWDSHTStatsRxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the remote side
|
|
used with the last received frame: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanWDSHTStatsEntry 33 }
|
|
|
|
wlanWDSHTStatsRxGuardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the remote side used with the last received frame:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanWDSHTStatsEntry 34 }
|
|
|
|
wlanWDSHTStatsTxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the local side
|
|
used for transmitting the last frame: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanWDSHTStatsEntry 35 }
|
|
|
|
wlanWDSHTStatsTxGuardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the local side used for transmitting the last frame:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanWDSHTStatsEntry 36 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 16."
|
|
::= { wlanWDSHTStatsEntry 37 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 17."
|
|
::= { wlanWDSHTStatsEntry 38 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 18."
|
|
::= { wlanWDSHTStatsEntry 39 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 19."
|
|
::= { wlanWDSHTStatsEntry 40 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 20."
|
|
::= { wlanWDSHTStatsEntry 41 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 21."
|
|
::= { wlanWDSHTStatsEntry 42 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 22."
|
|
::= { wlanWDSHTStatsEntry 43 }
|
|
|
|
wlanWDSHTStatsRxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 23."
|
|
::= { wlanWDSHTStatsEntry 44 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 16."
|
|
::= { wlanWDSHTStatsEntry 45 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 17."
|
|
::= { wlanWDSHTStatsEntry 46 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 18."
|
|
::= { wlanWDSHTStatsEntry 47 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 19."
|
|
::= { wlanWDSHTStatsEntry 48 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 20."
|
|
::= { wlanWDSHTStatsEntry 49 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 21."
|
|
::= { wlanWDSHTStatsEntry 50 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 22."
|
|
::= { wlanWDSHTStatsEntry 51 }
|
|
|
|
wlanWDSHTStatsTxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 23."
|
|
::= { wlanWDSHTStatsEntry 52 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanWDSHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanLinkTestHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
wlanLinkTestHTStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanLinkTestHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wlanLinkTestHTStatsTable contains additional statistical
|
|
data about 802.11n HT frames for WDS links.
|
|
|
|
Each entry corresponds to an wlanWDSTable entry.
|
|
Entries cannot be added or deleted by the user.
|
|
"
|
|
::= { wlan 19 }
|
|
|
|
wlanLinkTestHTStatsEntry OBJECT-TYPE
|
|
SYNTAX WlanLinkTestHTStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanLinkTestHTStatsIfIndex }
|
|
::= { wlanLinkTestHTStatsTable 1 }
|
|
|
|
WlanLinkTestHTStatsEntry ::=
|
|
SEQUENCE {
|
|
wlanLinkTestHTStatsIfIndex INTEGER,
|
|
wlanLinkTestHTStatsRxFramesMCS0 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS1 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS2 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS3 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS4 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS5 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS6 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS7 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS8 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS9 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS10 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS11 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS12 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS13 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS14 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS15 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS16 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS17 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS18 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS19 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS20 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS21 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS22 Counter32,
|
|
wlanLinkTestHTStatsRxFramesMCS23 Counter32,
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS0 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS1 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS2 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS3 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS4 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS5 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS6 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS7 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS8 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS9 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS10 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS11 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS12 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS13 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS14 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS15 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS16 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS17 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS18 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS19 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS20 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS21 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS22 Counter32,
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS23 Counter32,
|
|
wlanLinkTestHTStatsBandwidthLocal INTEGER,
|
|
wlanLinkTestHTStatsGuardIntervalLocal INTEGER,
|
|
wlanLinkTestHTStatsRSSI1Local WlanRSSI,
|
|
wlanLinkTestHTStatsRSSI2Local WlanRSSI,
|
|
wlanLinkTestHTStatsRSSI3Local WlanRSSI,
|
|
wlanLinkTestHTStatsBandwidthRemote INTEGER,
|
|
wlanLinkTestHTStatsGuardIntervalRemote INTEGER,
|
|
wlanLinkTestHTStatsRSSI1Remote WlanRSSI,
|
|
wlanLinkTestHTStatsRSSI2Remote WlanRSSI,
|
|
wlanLinkTestHTStatsRSSI3Remote WlanRSSI
|
|
}
|
|
|
|
wlanLinkTestHTStatsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the corresponding
|
|
bridge interface."
|
|
::= { wlanLinkTestHTStatsEntry 1 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 0."
|
|
::= { wlanLinkTestHTStatsEntry 2 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 1."
|
|
::= { wlanLinkTestHTStatsEntry 3 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 2."
|
|
::= { wlanLinkTestHTStatsEntry 4 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 3."
|
|
::= { wlanLinkTestHTStatsEntry 5 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 4."
|
|
::= { wlanLinkTestHTStatsEntry 6 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 5."
|
|
::= { wlanLinkTestHTStatsEntry 7 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 6."
|
|
::= { wlanLinkTestHTStatsEntry 8 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 7."
|
|
::= { wlanLinkTestHTStatsEntry 9 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were received at MCS 8."
|
|
::= { wlanLinkTestHTStatsEntry 10 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 9."
|
|
::= { wlanLinkTestHTStatsEntry 11 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 10."
|
|
::= { wlanLinkTestHTStatsEntry 12 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 11."
|
|
::= { wlanLinkTestHTStatsEntry 13 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 12."
|
|
::= { wlanLinkTestHTStatsEntry 14 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 13."
|
|
::= { wlanLinkTestHTStatsEntry 15 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 14."
|
|
::= { wlanLinkTestHTStatsEntry 16 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 15."
|
|
::= { wlanLinkTestHTStatsEntry 17 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 0."
|
|
::= { wlanLinkTestHTStatsEntry 18 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 1."
|
|
::= { wlanLinkTestHTStatsEntry 19 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 2."
|
|
::= { wlanLinkTestHTStatsEntry 20 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 3."
|
|
::= { wlanLinkTestHTStatsEntry 21 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 4."
|
|
::= { wlanLinkTestHTStatsEntry 22 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 5."
|
|
::= { wlanLinkTestHTStatsEntry 23 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 6."
|
|
::= { wlanLinkTestHTStatsEntry 24 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 7."
|
|
::= { wlanLinkTestHTStatsEntry 25 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of data
|
|
frames that were transmitted at MCS 8."
|
|
::= { wlanLinkTestHTStatsEntry 26 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 9."
|
|
::= { wlanLinkTestHTStatsEntry 27 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 10."
|
|
::= { wlanLinkTestHTStatsEntry 28 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 11."
|
|
::= { wlanLinkTestHTStatsEntry 29 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 12."
|
|
::= { wlanLinkTestHTStatsEntry 30 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 13."
|
|
::= { wlanLinkTestHTStatsEntry 31 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 14."
|
|
::= { wlanLinkTestHTStatsEntry 32 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS15 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 15."
|
|
::= { wlanLinkTestHTStatsEntry 33 }
|
|
|
|
wlanLinkTestHTStatsBandwidthLocal OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the remote side
|
|
used: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanLinkTestHTStatsEntry 34 }
|
|
|
|
wlanLinkTestHTStatsGuardIntervalLocal OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the remote side used:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanLinkTestHTStatsEntry 35 }
|
|
|
|
wlanLinkTestHTStatsRSSI1Local OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength
|
|
on the first receiver in dBm."
|
|
::= { wlanLinkTestHTStatsEntry 36 }
|
|
|
|
wlanLinkTestHTStatsRSSI2Local OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength
|
|
on the second receiver in dBm."
|
|
::= { wlanLinkTestHTStatsEntry 37 }
|
|
|
|
wlanLinkTestHTStatsRSSI3Local OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength
|
|
on the third receiver in dBm."
|
|
::= { wlanLinkTestHTStatsEntry 38 }
|
|
|
|
wlanLinkTestHTStatsBandwidthRemote OBJECT-TYPE
|
|
SYNTAX INTEGER { b20MHz(1), b40MHz(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the bandwidth the local side
|
|
used for transmitting: 20 MHz (1) or 40 MHz (2)."
|
|
DEFVAL { b20MHz }
|
|
::= { wlanLinkTestHTStatsEntry 39 }
|
|
|
|
wlanLinkTestHTStatsGuardIntervalRemote OBJECT-TYPE
|
|
SYNTAX INTEGER { long(1), short(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the length of the guard interval
|
|
the local side used for transmitting:
|
|
long (1) or short (2)."
|
|
DEFVAL { long }
|
|
::= { wlanLinkTestHTStatsEntry 40 }
|
|
|
|
wlanLinkTestHTStatsRSSI1Remote OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength
|
|
on the first receiver on the remote side in dBm."
|
|
::= { wlanLinkTestHTStatsEntry 41 }
|
|
|
|
wlanLinkTestHTStatsRSSI2Remote OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength
|
|
on the second receiver on the remote side in dBm."
|
|
::= { wlanLinkTestHTStatsEntry 42 }
|
|
|
|
wlanLinkTestHTStatsRSSI3Remote OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength
|
|
on the third receiver on the remote side in dBm."
|
|
::= { wlanLinkTestHTStatsEntry 43 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 16."
|
|
::= { wlanLinkTestHTStatsEntry 44 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 17."
|
|
::= { wlanLinkTestHTStatsEntry 45 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 18."
|
|
::= { wlanLinkTestHTStatsEntry 46 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 19."
|
|
::= { wlanLinkTestHTStatsEntry 47 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 20."
|
|
::= { wlanLinkTestHTStatsEntry 48 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 21."
|
|
::= { wlanLinkTestHTStatsEntry 49 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 22."
|
|
::= { wlanLinkTestHTStatsEntry 50 }
|
|
|
|
wlanLinkTestHTStatsRxFramesMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were received at MCS 23."
|
|
::= { wlanLinkTestHTStatsEntry 51 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS16 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 16."
|
|
::= { wlanLinkTestHTStatsEntry 52 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS17 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 17."
|
|
::= { wlanLinkTestHTStatsEntry 53 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS18 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 18."
|
|
::= { wlanLinkTestHTStatsEntry 54 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS19 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 19."
|
|
::= { wlanLinkTestHTStatsEntry 55 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS20 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 20."
|
|
::= { wlanLinkTestHTStatsEntry 56 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS21 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 21."
|
|
::= { wlanLinkTestHTStatsEntry 57 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS22 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 22."
|
|
::= { wlanLinkTestHTStatsEntry 58 }
|
|
|
|
wlanLinkTestHTStatsRxFramesRemoteMCS23 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shows the number of HT data
|
|
frames that were transmitted at MCS 23."
|
|
::= { wlanLinkTestHTStatsEntry 59 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanLinkTestHTStatsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * WLAN WDS Bridge notification Objects
|
|
-- **********************************************************************
|
|
wlanWDSNotification OBJECT IDENTIFIER
|
|
::= { wlan 20 }
|
|
|
|
wlanWDSLinkOperState NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
wlanWDSOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is triggered whenever the connection state
|
|
of the bridge link changes, i.e. link connection is lost,
|
|
or link connection is restored."
|
|
::= { wlanWDSNotification 1 }
|
|
|
|
wlanWDSLinkConfigScan NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
wlanWDSLinkConfigScanState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is thrown whenever the bridge link
|
|
auto-configuration scanning state changes."
|
|
::= { wlanWDSNotification 2 }
|
|
|
|
wlanWDSPeerConfigSetup NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
wlanWDSPeerConfigSetupState,
|
|
wlanWDSPeerConfigSetupResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is thrown whenever the bridge
|
|
link auto-configuration setup state changes."
|
|
::= { wlanWDSNotification 3 }
|
|
|
|
wlanWDSLinkLock NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
wlanWDSLinkLockState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is triggered whenever the
|
|
lock state of the bridge link changes."
|
|
::= { wlanWDSNotification 4 }
|
|
-- **********************************************************************
|
|
-- * End of WLAN WDS Bridge notification Objects
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * global WLAN
|
|
-- **********************************************************************
|
|
wlanGlobal OBJECT IDENTIFIER
|
|
::= { wlan 21 }
|
|
|
|
wlanGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a global WLAN switch to enable/disable
|
|
all WLAN cards (can be used for a WLAN button)"
|
|
DEFVAL { true }
|
|
::= { wlanGlobal 1 }
|
|
|
|
wlanGlobalDebugType OBJECT-TYPE
|
|
SYNTAX INTEGER { common(1), authentication(2),
|
|
access-point(3), bridge(4), client(5),
|
|
lowlevel(6), all(7) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless LAN degugging type. With type common(1) debugging messages
|
|
of authentication, access_point, bridge and client
|
|
handling will be shown. With type
|
|
authentication(2) only messages concerning the authentication
|
|
handling (mainly WPA) will be shown. With type access_point(3)
|
|
only messages concerning the access_point handling
|
|
will be shown. With type bridge(4) only messages concerning
|
|
the bridge handling will be shown. With type client(5) only
|
|
messages concerning the client (wlanIfType == client) will be
|
|
shown. With type lowlevel(6) messages concerning the 802.11 layer
|
|
and lowlevel driver handling will be shown. With type all(7) all
|
|
messages of all types will be shown. Default is common(1).
|
|
Additionally within all types messages concerning generally wlan
|
|
handling will be shown."
|
|
DEFVAL { common }
|
|
::= { wlanGlobal 2 }
|
|
|
|
wlanGlobalDebugLevel OBJECT-TYPE
|
|
SYNTAX INTEGER { quiet(1), normal(2), verbose(3), very-verbose(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless LAN degugging verbosity level. With a higher value
|
|
more debugging information will be created. Default is normal(2)."
|
|
DEFVAL { normal }
|
|
::= { wlanGlobal 3 }
|
|
|
|
wlanGlobalAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { unmanaged(1), managed(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless LAN global AdminStatus. The AP could be used
|
|
unmanaged(1) and must therefore be configured directly
|
|
or managed(2) by a WLAN controller. Default is unmanaged(1)."
|
|
DEFVAL { unmanaged }
|
|
::= { wlanGlobal 4 }
|
|
|
|
wlanGlobalOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { undefined(1), managed-waiting(2),
|
|
managed-controlled(3), unmanaged(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless LAN global OperStatus. This variable shows the state of
|
|
the AP where undefined(1) is the initial state when the AP comes up.
|
|
The AP is in the managed_waiting(2) state when he waits for a
|
|
feedback of a WLAN controller. In managed_controlled(3) state the AP
|
|
is connected to and controlled by a WLAN controller. The
|
|
unmanaged(4) state is reached when the AP is set to
|
|
wlanGlobalAdminStatus=unmanaged by the Admin.
|
|
Default is undefined(1)."
|
|
DEFVAL { undefined }
|
|
::= { wlanGlobal 5 }
|
|
|
|
wlanGlobalScanResultsMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If a scan result wasn't seen for so many seconds,
|
|
it will be removed from wlanScanResultsTable."
|
|
DEFVAL { 3600 }
|
|
::= { wlanGlobal 6 }
|
|
|
|
-- **********************************************************************
|
|
-- * wlanWMMTable TABLE
|
|
-- **********************************************************************
|
|
wlanWMMTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanWMMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Describes a WLAN WMM Access category settings"
|
|
::= { wlan 22 }
|
|
|
|
wlanWMMEntry OBJECT-TYPE
|
|
SYNTAX WlanWMMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanWMMAccCat, wlanWMMwlanIf, wlanWMMType }
|
|
::= { wlanWMMTable 1 }
|
|
|
|
WlanWMMEntry ::=
|
|
SEQUENCE {
|
|
wlanWMMAccCat INTEGER,
|
|
wlanWMMwlanIf INTEGER,
|
|
wlanWMMaCWmin INTEGER,
|
|
wlanWMMaCWmax INTEGER,
|
|
wlanWMMAifsn INTEGER,
|
|
wlanWMMTxopLimitb INTEGER,
|
|
wlanWMMTxopLimitg INTEGER,
|
|
wlanWMMAckPolicy INTEGER,
|
|
wlanWMMACM INTEGER,
|
|
wlanWMMType INTEGER
|
|
}
|
|
|
|
wlanWMMAccCat OBJECT-TYPE
|
|
SYNTAX INTEGER { besteffort(1), background(2), video(3), voice(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access category type, each category is mandatory for a wlanIf.
|
|
|
|
An access category (AC) is a label for the common set of enhanced
|
|
distributed channel access (EDCA) parameters that are used by a
|
|
quality of service (QoS) station (QSTA) to contend for the channel
|
|
in order to transmit medium access control (MAC) service data
|
|
units (MSDUs) with certain priorities.
|
|
|
|
(More info in '802.11E / 3.123 access category (AC)').
|
|
|
|
besteffort(1): standard/default priority
|
|
background(2): low priority
|
|
video(3): medium priority (higher than 'besteffort')
|
|
voice(4): high priority"
|
|
DEFVAL { besteffort }
|
|
::= { wlanWMMEntry 1 }
|
|
|
|
wlanWMMwlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio index the AC belongs to."
|
|
::= { wlanWMMEntry 2 }
|
|
|
|
wlanWMMaCWmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum size of contention window.
|
|
for AC_BK and AC_BE wlanWMMaCWmin = wlanIfCWmin,
|
|
for AC_VI wlanWMMaCWmin = (wlanIfCWmin-1)/2,
|
|
for AC_VO wlanWMMaCWmin = (wlanIfCWmin-3)/4."
|
|
::= { wlanWMMEntry 3 }
|
|
|
|
wlanWMMaCWmax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum size of contention window.
|
|
for AC_BK wlanWMMaCWmax = wlanIfCWmax,
|
|
for AC_BE wlanWMMaCWmax = 4*wlanIfCWmin + 3,
|
|
for AC_VI wlanWMMaCWmax = wlanIfCWmin,
|
|
for AC_VO wlanWMMaCWmax = (wlanIfCWmin-1)/2."
|
|
::= { wlanWMMEntry 4 }
|
|
|
|
wlanWMMAifsn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Arbitration Inter-Frame Space Number (AIFSN)
|
|
for this Access category."
|
|
::= { wlanWMMEntry 5 }
|
|
|
|
wlanWMMTxopLimitb OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11b mode Transmit Opportunity Limit."
|
|
::= { wlanWMMEntry 6 }
|
|
|
|
wlanWMMTxopLimitg OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11g mode Transmit Opportunity Limit."
|
|
::= { wlanWMMEntry 7 }
|
|
|
|
wlanWMMAckPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER { ack(1), noAck(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ack policy for this Access category (default value is 'ack(1)')."
|
|
DEFVAL { ack }
|
|
::= { wlanWMMEntry 8 }
|
|
|
|
wlanWMMACM OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACM (admission control) policy for this Access category i
|
|
(default value is 'disabled(2)')."
|
|
DEFVAL { disabled }
|
|
::= { wlanWMMEntry 9 }
|
|
|
|
wlanWMMType OBJECT-TYPE
|
|
SYNTAX INTEGER { access-point(1), station(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type to which this wlanWMMEntry corresponds.
|
|
Type access_point means the own parameters for WMM are changed.
|
|
The entries with type station will be provided to the connected
|
|
stations via WMM-IE (default value is 'access_point(1)')."
|
|
DEFVAL { access-point }
|
|
::= { wlanWMMEntry 10 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanWMMTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanIfFeatureTable TABLE
|
|
-- **********************************************************************
|
|
wlanIfFeatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanIfFeatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists all feature of a wireless card.
|
|
The supported features depends on the vendor and
|
|
wireless chipset."
|
|
::= { wlan 23 }
|
|
|
|
wlanIfFeatureEntry OBJECT-TYPE
|
|
SYNTAX WlanIfFeatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { wlanIfFeatureWlanIf }
|
|
::= { wlanIfFeatureTable 1 }
|
|
|
|
WlanIfFeatureEntry ::=
|
|
SEQUENCE {
|
|
wlanIfFeatureWlanIf INTEGER,
|
|
wlanIfFeatureOperatingBands BITS,
|
|
wlanIfFeatureAntennaDiversity INTEGER,
|
|
wlanIfFeatureTxPowerMin INTEGER,
|
|
wlanIfFeatureTxPowerMax INTEGER,
|
|
wlanIfFeatureTxPowerFixedStepsList DisplayString,
|
|
wlanIfFeatureFrameCompression TruthValue,
|
|
wlanIfFeatureFrameConcatenation TruthValue,
|
|
wlanIfFeaturePiggybackAck TruthValue,
|
|
wlanIfFeatureDirectLink TruthValue,
|
|
wlanIfFeatureLinkDistance TruthValue,
|
|
wlanIfFeatureShortRetries TruthValue,
|
|
wlanIfFeatureLongRetries TruthValue,
|
|
wlanIfFeatureFragThreshold TruthValue,
|
|
wlanIfFeatureCCAMode TruthValue,
|
|
wlanIfFeatureEdThreshold TruthValue,
|
|
wlanIfFeatureCWMin TruthValue,
|
|
wlanIfFeatureCWMax TruthValue,
|
|
wlanIfFeatureRxLifetime TruthValue,
|
|
wlanIfFeatureTxLifetime TruthValue,
|
|
wlanIfFeatureSkipModes BITS,
|
|
wlanIfFeatureSupportedModes BITS,
|
|
wlanIfFeatureSpatialStreams INTEGER,
|
|
wlanIfFeatureMaxVSS INTEGER,
|
|
wlanIfFeatureMaxWDS INTEGER,
|
|
wlanIfFeatureMaxClient INTEGER,
|
|
wlanIfFeatureMaxStations INTEGER
|
|
}
|
|
|
|
wlanIfFeatureWlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless card interface index the table belongs."
|
|
::= { wlanIfFeatureEntry 1 }
|
|
|
|
wlanIfFeatureOperatingBands OBJECT-TYPE
|
|
SYNTAX BITS { band24(0), band5(1), band58(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says which bands the wireless card supports.
|
|
Default is 2.4 and 5 GHZ."
|
|
DEFVAL { { band24 } }
|
|
::= { wlanIfFeatureEntry 2 }
|
|
|
|
wlanIfFeatureAntennaDiversity OBJECT-TYPE
|
|
SYNTAX INTEGER { none (0),
|
|
rx (1),
|
|
tx (2),
|
|
rx-tx (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says which kind of antenna diversity
|
|
the wireless card supports.
|
|
Default is none."
|
|
DEFVAL { none }
|
|
::= { wlanIfFeatureEntry 3 }
|
|
|
|
wlanIfFeatureTxPowerMin OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..30 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimal value of the TX power the wireless card supports."
|
|
DEFVAL { 0 }
|
|
::= { wlanIfFeatureEntry 4 }
|
|
|
|
wlanIfFeatureTxPowerMax OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..100 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximal value of the TX power the wireless card supports."
|
|
DEFVAL { 20 }
|
|
::= { wlanIfFeatureEntry 5 }
|
|
|
|
wlanIfFeatureTxPowerFixedStepsList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable shows the available TX Power values in dBm
|
|
seperated by commas."
|
|
::= { wlanIfFeatureEntry 6 }
|
|
|
|
wlanIfFeatureFrameCompression OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
frame compression or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 7 }
|
|
|
|
wlanIfFeatureFrameConcatenation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
frame concatination or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 8 }
|
|
|
|
wlanIfFeaturePiggybackAck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
piggyback ACKs or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 9 }
|
|
|
|
wlanIfFeatureDirectLink OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
direct links or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 10 }
|
|
|
|
wlanIfFeatureLinkDistance OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports a
|
|
configurable link distance or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 11 }
|
|
|
|
wlanIfFeatureShortRetries OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the short retry value or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 12 }
|
|
|
|
wlanIfFeatureLongRetries OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the long retry value or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 13 }
|
|
|
|
wlanIfFeatureFragThreshold OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the fragmentation threshold
|
|
value or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 14 }
|
|
|
|
wlanIfFeatureCCAMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the CCA mode or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 15 }
|
|
|
|
wlanIfFeatureEdThreshold OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the energy detection threshold
|
|
value or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 16 }
|
|
|
|
wlanIfFeatureCWMin OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the minimal contention window or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 17 }
|
|
|
|
wlanIfFeatureCWMax OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the maximal contention window or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 18 }
|
|
|
|
wlanIfFeatureRxLifetime OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the receive packet lifetime or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 19 }
|
|
|
|
wlanIfFeatureTxLifetime OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says if the wireless card supports
|
|
the configuration of the transmit packet lifetime or not.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { wlanIfFeatureEntry 20 }
|
|
|
|
wlanIfFeatureSkipModes OBJECT-TYPE
|
|
SYNTAX BITS { ap24ghz(0), ap5ghz(1), client24ghz(2), client5ghz(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable says which modes of the WlanIfSkipChannels the wireless card supports.
|
|
Default is client24ghz."
|
|
DEFVAL { { client24ghz } }
|
|
::= { wlanIfFeatureEntry 21 }
|
|
|
|
wlanIfFeatureSupportedModes OBJECT-TYPE
|
|
SYNTAX BITS { dot11a(0), dot11b(1), dot11g(2), dot11n(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable shows the supported 802.11 modes"
|
|
DEFVAL { { dot11b } }
|
|
::= { wlanIfFeatureEntry 22 }
|
|
|
|
wlanIfFeatureSpatialStreams OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..4 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable shows the maximum number
|
|
of supported spatial streams"
|
|
DEFVAL { 1 }
|
|
::= { wlanIfFeatureEntry 23 }
|
|
|
|
|
|
wlanIfFeatureMaxVSS OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the maximum number of service sets
|
|
that may be created per radio module.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { wlanIfFeatureEntry 30 }
|
|
|
|
wlanIfFeatureMaxWDS OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the maximum number of WDS links
|
|
that may be created per radio module.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { wlanIfFeatureEntry 31 }
|
|
|
|
wlanIfFeatureMaxClient OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the maximum number of client instances
|
|
that may be created per radio module.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { wlanIfFeatureEntry 32 }
|
|
|
|
wlanIfFeatureMaxStations OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of stations the station database can hold."
|
|
DEFVAL { 128 }
|
|
::= { wlanIfFeatureEntry 33 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of wlanIfFeatureTable TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * wlanWDSStatsTable TABLE
|
|
-- **********************************************************************
|
|
-- **********************************************************************
|
|
-- * End of wlanWDSStatsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * wlanClientStatsTable TABLE
|
|
-- **********************************************************************
|
|
-- **********************************************************************
|
|
-- * End of wlanClientStatsTable TABLE
|
|
-- **********************************************************************
|
|
|
|
|
|
END
|