1973 lines
100 KiB
Plaintext
1973 lines
100 KiB
Plaintext
Avaya-96xxIPTelephone-MIB
|
|
DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
enterprises, OBJECT-TYPE, MODULE-IDENTITY, Integer32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM RFC1213-MIB ;
|
|
|
|
avaya96xxMIB MODULE-IDENTITY
|
|
LAST-UPDATED "0908052000Z"
|
|
ORGANIZATION "avaya"
|
|
CONTACT-INFO "Avaya Customer Services
|
|
Avaya, Inc.
|
|
211 Mt. Airy Road
|
|
Basking Ridge, NJ 07920 US (A
|
|
WWW: www.avaya.com
|
|
Tel: +1 908 953 6000"
|
|
|
|
DESCRIPTION "MIB Module for 96xx IP Telephones as of Release S3.1
|
|
in accordance with 96xx IP RFS 110716, Issue 3.1.
|
|
Copyright 2009 by Avaya Inc. All rights reserved."
|
|
::= { ipEndpointMIBs 2 }
|
|
|
|
avaya OBJECT IDENTIFIER ::= { enterprises 6889 }
|
|
products OBJECT IDENTIFIER ::= { avaya 1 }
|
|
avayaMibs OBJECT IDENTIFIER ::= { avaya 2 }
|
|
avayaipEndpointProd OBJECT IDENTIFIER ::= { products 69 }
|
|
ipEndpointMIBs OBJECT IDENTIFIER ::= { avayaMibs 69 }
|
|
|
|
|
|
endptID OBJECT IDENTIFIER ::= { avaya96xxMIB 1 }
|
|
endptAGCHAND OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Handset AGC status. This variable returns 1
|
|
if the endpoint's handset Automatic Gain Control
|
|
capability is currently enabled, else 0."
|
|
::= { endptID 1 }
|
|
endptAGCHEAD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Headset AGC status. This variable returns 1
|
|
if the endpoint's headset Automatic Gain Control
|
|
capability is currently enabled, else 0."
|
|
::= { endptID 2 }
|
|
endptAGCSPKR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Speakerphone AGC status. This variable returns
|
|
1 if the endpoint's speakerphone Automatic Gain Control
|
|
capability is currently enabled, else 0."
|
|
::= { endptID 3 }
|
|
endptAPPINUSE OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Application file name. This variable returns
|
|
the name of the application file in the endpoint."
|
|
::= { endptID 4 }
|
|
endptAPPNAME OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Application file ID. This variable returns
|
|
a string specifying the system-specific application
|
|
file that should be used for telephone operation."
|
|
::= { endptID 5 }
|
|
endptBAKLIGHTOFF OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Backlight idle timer setting. This variable returns
|
|
the number of minutes of idle time, after which the
|
|
telephone backlightis turned off. Range is 0-999, with a
|
|
default of 120. Used in phones with backlit displays."
|
|
::= { endptID 6 }
|
|
endptBOOTNAME OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Boot code file ID. This variable returns a string
|
|
specifying the boot code
|
|
file used to initiate telephone operation."
|
|
::= { endptID 7 }
|
|
endptBRURI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Backup and restore URI. This variable returns
|
|
a string specifying the URI used for backup and restore files."
|
|
::= { endptID 8 }
|
|
endptCNAPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chatter server port. This variable returns the
|
|
Chatter server registration transport-layer port number
|
|
(from 0 to 65535; default is 8888)."
|
|
::= { endptID 9 }
|
|
endptCNASRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CNA server addresses. This variable returns zero
|
|
or more Chatter server addresses for network analysis, in
|
|
dotted decimal or DNS format."
|
|
::= { endptID 10 }
|
|
endptCODECR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Receive codec. This variable returns the
|
|
designation of the Receive codec currently in use."
|
|
::= { endptID 11 }
|
|
endptCODECT OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Transmit codec. This variable returns the
|
|
designation of the Transmit codec currently in use."
|
|
::= { endptID 12 }
|
|
endptDHCPLEASEREBIND OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rebind time of IPADD lease. This
|
|
variable returns an unsigned integer specifying
|
|
the length of time at which to rebind the IPADD
|
|
lease, in seconds as received by DHCP option 59
|
|
or as computed from the lease time if option 59 is
|
|
is not received."
|
|
::= { endptID 13 }
|
|
endptDHCPLEASERENEW OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Renewal time of IPADD lease. This
|
|
variable returns an unsigned integer specifying
|
|
the length of time at which to renew the IPADD
|
|
lease, in seconds as received by DHCP option 58
|
|
or as computed from the lease time if option 58 is
|
|
is not received."
|
|
::= { endptID 14 }
|
|
endptDHCPLEASETIME OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Duration of IPADD lease. This variable
|
|
returns an unsigned integer specifying the length
|
|
of time of the IPADD lease, in seconds as received
|
|
by DHCP option 51."
|
|
::= { endptID 15 }
|
|
endptDNSSRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of DNS server addresses. This variable
|
|
returns a sequence of IP addresses, in dotted-decimal
|
|
format and separated by commas, of DNS servers
|
|
available for use."
|
|
::= { endptID 16 }
|
|
endptDOMAIN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of DNS domain labels. This variable
|
|
returns a sequence of labels, separated by periods, for
|
|
use as the highest-level domain in resolving DNS names
|
|
in system values."
|
|
::= { endptID 17 }
|
|
endptDOT1X OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current value for 802.1X handling. This variable returns
|
|
0 if Supplicant operation is Enabled, 1 if Supplicant operation is
|
|
Enabled with proxy Logoff, and 2 if Supplicant operation is Disabled.
|
|
The default is 0."
|
|
::= { endptID 18 }
|
|
endptDSCPAUD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DSCP for audio. This variable specifies the
|
|
Differentiated Services Code Point for audio
|
|
currently in use (between 0 and 63 inclusive)."
|
|
::= { endptID 19 }
|
|
endptDSCPBBE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DSCP BBE priority value. This variable returns
|
|
an integer between 0 and 7 inclusive specifying the
|
|
far-end endpoint's DiffServ Better than Best Effort audio
|
|
priority value."
|
|
::= { endptID 20 }
|
|
endptDSCPSIG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " DSCP for signaling. This variable specifies
|
|
the Differentiated Services Code Point for signaling
|
|
currently in use (between 0 and 63 inclusive)."
|
|
::= { endptID 21 }
|
|
endptDSPVERSION OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DSP Version. This variable returns a string
|
|
of up to 10 characters, that identifies the version of
|
|
the DSP firmware in the endpoint."
|
|
::= { endptID 22 }
|
|
endptFEIPADD OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Audio endpoint address. This variable returns
|
|
a 4-octet string specifying the address of the far-end
|
|
audio endpoint currently in use."
|
|
::= { endptID 23 }
|
|
endptFEPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Audio endpoint port number. This variable returns
|
|
the far-end endpoint's transport layer port number for
|
|
audio, currently in use."
|
|
::= { endptID 24 }
|
|
endptGIPADD OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of router addresses. This variable returns a
|
|
sequence of IP addresses, in dotted-decimal format and
|
|
separated by commas, of routers available for use."
|
|
::= { endptID 25 }
|
|
endptGIPINUSE OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Router address. This variable returns
|
|
a 4-octet string specifying the IP address of
|
|
the router currently in use."
|
|
::= { endptID 26 }
|
|
endptGROUP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Group identifier. This variable returns the
|
|
integer corresponding to the current group identifier."
|
|
::= { endptID 27 }
|
|
endptHTTPDIR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HTTP server Directory. This variable returns
|
|
the path used in formation of the URI for HTTP GET
|
|
operations."
|
|
::= { endptID 28 }
|
|
endptHTTPSRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HTTP server IP addresses. This variable
|
|
returns a comma-separated list of HTTP server IP
|
|
addresses available for use, in dotted-decimal or
|
|
DNS format."
|
|
::= { endptID 29 }
|
|
endptHTTPUSED OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HTTP initialization server IP address. This
|
|
variable returns a 4-octet IP address for the HTTP server
|
|
used during initialization (all zeroes if no server
|
|
successfully used during initialization)."
|
|
::= { endptID 30 }
|
|
endptICMPDU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current value for ICMP Destination message handling.
|
|
This variable returns 0 if the telephone does not transmit ICMP
|
|
Destination Unreachable messages are not transmitted; 1 if such
|
|
messages are transmitted only in response to datagrams that
|
|
designate closed UDP ports or if the designated transport
|
|
protocol is not supported, and 2 if such such messages are
|
|
sent only in response to datagrams that designate closed UDP
|
|
or TCP ports or if the designated transport protocol is not
|
|
supported. The default is 1."
|
|
::= { endptID 31 }
|
|
endptICMPRED OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current value for ICMP Redirect message handling. This
|
|
variable returns 1 if received Redict messages are handled as
|
|
specified in RFC 1122, Sections 3.2.2.2 and 3.3.1.2, else 0.
|
|
The default is 0."
|
|
::= { endptID 32 }
|
|
endptIPADD OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Endpoint IP address. This variable returns a 4-octet string
|
|
specifying the endpoint's current IP address."
|
|
::= { endptID 33 }
|
|
endptJMSEC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Jitter buffer size. This variable returns the number of
|
|
milliseconds of delay added to compensate for network jitter, from
|
|
0-300 milliseconds. The default is 10."
|
|
::= { endptID 34 }
|
|
endptL2Q OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "802.1Q framing flag. This variable returns 0
|
|
if the Layer 2 802.1Q framing parameter is set to
|
|
'auto', 1 if it is set to on/enabled, else 2 for
|
|
off/disabled."
|
|
::= { endptID 35 }
|
|
endptL2QAUD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Audio priority. This variable returns an
|
|
integer between 0 and 7 inclusive specifying the
|
|
current Layer 2 802.1Q audio priority value."
|
|
::= { endptID 36 }
|
|
endptL2QSIG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Signaling priority. This variable returns
|
|
an integer between 0 and 7 inclusive specifying the
|
|
current Layer 2 802.1Q signaling priority value."
|
|
::= { endptID 37 }
|
|
endptL2QSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "802.1Q tagging flag. This variable returns 0
|
|
if the Layer 2 802.1Q tagging parameter is currently
|
|
OFF, else 1."
|
|
::= { endptID 38 }
|
|
endptL2QVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Administered Telephone VLAN Identifier. This variable
|
|
returns an integer between 0 and 4094 inclusive specifying the
|
|
administered Layer 2 802.1Q VLAN Identifier value."
|
|
::= { endptID 39 }
|
|
endptL2QVLANINUSE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Telephone VLAN Identifier in use. This variable
|
|
returns an integer between 0 and 4094 inclusive specifying
|
|
the current Layer 2 802.1Q VLAN Identifier value."
|
|
::= { endptID 40 }
|
|
endptLOGSRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Event Log server address. This variable
|
|
returns at most one IP address, in dotted-decimal
|
|
or DNS format, of the server to be used for event
|
|
logging. This function is intended for Avaya use,
|
|
in debugging if necessary."
|
|
::= { endptID 41 }
|
|
endptMACADDR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC address. This variable returns a 6-octet
|
|
string specifying the endpoint's MAC address."
|
|
::= { endptID 42 }
|
|
endptMODEL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Model identifier. This variable returns
|
|
a string of up to 8 ASCII characters."
|
|
::= { endptID 43 }
|
|
endptNETMASK OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Subnet mask. This variable returns a
|
|
4-octet string specifying the subnet mask
|
|
currently in use."
|
|
::= { endptID 44 }
|
|
endptPHONECC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Phone comcode. This variable returns a string
|
|
of up to 9 numerical characters, specifying the comcode
|
|
of the endpoint itself."
|
|
::= { endptID 45 }
|
|
endptPHONESN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Housing serial number. This variable
|
|
returns a string of up to 18 ASCII characters,
|
|
specifying the serial number on the outside
|
|
of the endpoint's housing."
|
|
::= { endptID 46 }
|
|
endptPHY1DUPLEX OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ethernet line interface duplex setting. This variable
|
|
returns 1 if the interface is half-duplex and 2 if the interface
|
|
is full duplex."
|
|
::= { endptID 47 }
|
|
endptPHY1SPEED OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ethernet interface speed. This variable
|
|
returns a string specifying the endpoint's Ethernet
|
|
interface speed in Mbps: '100' or '10'."
|
|
::= { endptID 48 }
|
|
endptPHY1STAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ethernet line interface status. This
|
|
variable returns 0 if the endpoint's Ethernet line
|
|
interface is currently NOT enabled, 1 if the Ethernet
|
|
line interface is currently for auto-negotiation, 2 for
|
|
10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for
|
|
100Mbps half-duplex, and 5 for 100Mbps full-duplex."
|
|
::= { endptID 49 }
|
|
endptPHY2DUPLEX OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Secondary Ethernet interface duplex setting. This
|
|
variable returns 0 if no link is established, 1 if the interface
|
|
is half-duplex,and 2 if the interface is full duplex."
|
|
::= { endptID 50 }
|
|
endptPHY2PRIO OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Secondary Ethernet interface Layer 2 priority. This
|
|
variable returns 0 through 7, and is used with endptVLANSEP.
|
|
The default is 0."
|
|
::= { endptID 51 }
|
|
endptPHY2SPEED OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Secondary Ethernet speed. This variable
|
|
returns a string specifying the endpoint's Ethernet
|
|
interface speed in Mbps: '100' or '10' or '0'."
|
|
::= { endptID 52 }
|
|
endptPHY2STAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Secondary Ethernet interface status. This
|
|
variable returns 0 if the endpoint's Secondary Ethernet
|
|
interface is currently NOT enabled, 1 if the Secondary Ethernet
|
|
interface is currently for auto-negotiation, 2 for
|
|
10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for
|
|
100Mbps half-duplex, and 5 for 100Mbps full-duplex."
|
|
::= { endptID 53 }
|
|
endptPHY2VLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Secondary Ethernet interface VLAN ID. This
|
|
variable returns an integer between 0 and 4094 inclusive
|
|
specifying the current Layer 2 802.1Q VLAN Identifier
|
|
value for tagged frames received on the secondary Ethernet
|
|
interface while VLAN separation is enabled."
|
|
::= { endptID 54 }
|
|
endptPORTAUD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Transport-layer audio port. This variable returns
|
|
the endpoint's transport layer port number for audio,
|
|
currently in use."
|
|
::= { endptID 55 }
|
|
endptPROCPSWD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Procedure Password. This variable returns
|
|
0 if the Local Procedure Password is null, else 1."
|
|
::= { endptID 56 }
|
|
endptPROCSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Procedure flag. This variable returns 0 if
|
|
Local Procedures are currently allowed for this telephone,
|
|
else 1."
|
|
::= { endptID 57 }
|
|
endptPWBCC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PWB comcode. This variable returns
|
|
a string of up to 9 numerical characters,
|
|
specifying the comcode or version number of
|
|
the printed wiring board of the endpoint."
|
|
::= { endptID 58 }
|
|
endptPWBSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PWB serial number. This variable
|
|
returns a string of up to 18 ASCII characters,
|
|
specifying the serial number on the endpoint's
|
|
printed wiring board, or N/A if the board has
|
|
no serial number."
|
|
::= { endptID 59 }
|
|
endptRTCPCONT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTCP Control flag. This variable returns
|
|
0 if the RTCP control status is off/disabled, else 1."
|
|
::= { endptID 60 }
|
|
endptRTCPFLOW OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTCP Flowrate. This variable returns
|
|
an integer between 5 and 30 inclusive specifying the
|
|
RTCP flowrate in milliseconds."
|
|
::= { endptID 61 }
|
|
endptRTCPMON OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTCP Monitor address. This variable returns a
|
|
4-octet string specifying the IP address of the RTCP
|
|
monitor currently in use."
|
|
::= { endptID 62 }
|
|
endptRSVPCONT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSVP Control flag. This variable returns
|
|
0 if the RSVP control status is off/disabled, else 1."
|
|
::= { endptID 63 }
|
|
endptRSVPRFRSH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSVP Refresh rate. This variable returns
|
|
an integer between 1 and 3600 inclusive specifying the
|
|
RSVP refresh rate in milliseconds."
|
|
::= { endptID 64 }
|
|
endptRSVPRTRY OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSVP Failed Retry flag. This variable returns
|
|
0 if the RSVP Failed Retry Reservation control status is
|
|
off/disabled, else 1."
|
|
::= { endptID 65 }
|
|
endptRSVPPROF OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSVP profile flag. This variable returns
|
|
0 if the RSVP profile is guaranteed, else 1 for controlled
|
|
load."
|
|
::= { endptID 66 }
|
|
endptSIG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Signaling protocol download flag. This variable
|
|
returns the integer corresponding to the current
|
|
signaling protocol."
|
|
::= { endptID 67 }
|
|
endptSNMPADD OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNMP source addresses. This variable returns
|
|
one or more allowable source IP addresses for SNMP queries,
|
|
in dotted decimal or DNS format."
|
|
::= { endptID 68 }
|
|
endptSTATIC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Static programming override flag. This variable
|
|
returns the integer corresponding to the current level of
|
|
override permissions for static programming."
|
|
::= { endptID 69 }
|
|
endptTLSSRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TLS server addresses. This variable returns zero
|
|
or more Transport Layer Security server addresses for
|
|
software download, in dotted decimal or DNS format."
|
|
::= { endptID 70 }
|
|
endptTLSUSED OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TLS server address used. This variable returns the
|
|
TLS server address from TLSSRVR used, if any, during
|
|
initialization, or all zeroes if no TLS server was used."
|
|
::= { endptID 71 }
|
|
endptTMSEC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Transmit buffer fill level. This variable returns
|
|
the transmit buffer minimum fill level, in msec, currently
|
|
in use."
|
|
::= { endptID 72 }
|
|
endptVLANLIST OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VLAN ID list. This variable returns a list of
|
|
zero or more VLAN IDs."
|
|
::= { endptID 73 }
|
|
endptVLANSEP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VLAN separation value. This variable returns 0
|
|
if frames received on the secondary Ethernet interface are
|
|
unchanged before forwarding; else 1, which is the default."
|
|
::= { endptID 74 }
|
|
endptFONT OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Font file identifier. This variable returns a text string
|
|
with the name of the font file stored in the phone, if any."
|
|
::= { endptID 75 }
|
|
endptLANGFILES OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Language file list. This variable returns a comma-separated
|
|
text string listing the language files stored in the phone,
|
|
if any."
|
|
::= { endptID 76 }
|
|
endptPHNEMERGNUM OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Emergency Number. This variable returns a telephone number
|
|
to be dialed when an Emergency softkey is pressed."
|
|
::= { endptID 77}
|
|
endptAUDIOENV OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Audio Environment parameter. This variable returns the current value
|
|
of AUDIOENV."
|
|
::= { endptID 78}
|
|
endptAUDIOSTHD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Audio Handset Sidetone parameter. This variable returns the current
|
|
value of AUDIOSTHD."
|
|
::= { endptID 79}
|
|
endptAUDIOSTHS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Audio Headset Sidetone parameter. This variable returns the current
|
|
value of AUDIOSTHS."
|
|
::= { endptID 80}
|
|
endptBRAUTH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Backup/Restore authentication control. This variable returns 0
|
|
if the call server IP address and telephone's registration password is NOT
|
|
not included as credentials in an Authentication request-header; 1 (the default) if that
|
|
data is included and the telephone will accept the server's digital certificate if signed by
|
|
Avaya, or 2 if that data is included and the telephone will accept the server's
|
|
digital certificate if signed by Avaya or a trusted certificate based on TRUSTCERTS."
|
|
::= { endptID 81}
|
|
endptDHCPINUSE OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address of DHCP server from which phone's IP address was obtained. This
|
|
variable returns four zeroes by default or when the telephone is manually programmed."
|
|
::= { endptID 82 }
|
|
endptDHCPLEASEEXP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DHCP lease expiration. This variable returns the time (in seconds) remaining
|
|
until the expiration of the current DHCP lease; or 0 if the lease has expired."
|
|
::= { endptID 83 }
|
|
endptDHCPSTD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DHCP compliance flag. This variable returns 0 (the default) if the
|
|
telephone ignores the DHCP standard and continues using its IP address after its
|
|
lease has expired, assuming the DHCP server cannot be reached. The value 1 is returned
|
|
if the DHCP standard is followed and the telephone stops using its IP address (IPADD)."
|
|
::= { endptID 84}
|
|
endptDHCPT1REM OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DHCP lease renewal expiration. This variable returns the time (in seconds) until
|
|
the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired."
|
|
::= { endptID 85 }
|
|
endptDHCPT2REM OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DHCP lease rebinding expiration. This variable returns the time (in seconds) remaining
|
|
until the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired."
|
|
::= { endptID 86 }
|
|
endptDOT1XSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "802.1X Supplicant status. This variable returns 0 if 802.1X Supplicant mode is
|
|
Disabled; 1 (the default) if the supplicant mode is set to Unicast-only, and 2 if the supplicant
|
|
mode is set to Unicast/Multicast."
|
|
::= { endptID 87}
|
|
endptHTTPPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HTTP port number. This variable returns the TCP port number used for HTTP file downloading."
|
|
::= { endptID 88}
|
|
endptTLSDIR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TLS Server Directory. This variable returns the path that
|
|
is prepended to all file names used in HTTPS GET operations."
|
|
::= { endptID 89}
|
|
endptTLSPORT OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TLS server port number. This variable returns
|
|
the TCP port number used for HTTPS file downloading."
|
|
::= { endptID 90}
|
|
endptMEMHEAPFREE OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Heap allocation. This variable returns the number of bytes of
|
|
volatile memory currently allocated for, but unused by, the Heap."
|
|
::= { endptID 91}
|
|
endptSSONCONTENT OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SSON Content. This variable returns the data portion of the
|
|
DHCP site-specific option designated by NVSSON, exactly as received."
|
|
::= { endptID 92}
|
|
endptTLSSRVRID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TLS server ID flag. This variable returns 1 if the TLS server
|
|
identity is to be checked against its certificate, otherwise 0."
|
|
::= { endptID 93}
|
|
endptTRUSTCERTS OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Trusted Certificates list. This variable returns the current
|
|
trusted certificates to be downloaded; 0-255 ASCII
|
|
characters, 0 or more filenames or URLs separated by commas."
|
|
::= { endptID 94}
|
|
endptVOXFILES OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Voice language files list. This variable returns the current
|
|
list of voice langauge files to be downloaded; 0-255 ASCII
|
|
characters, 0 or more filenames separated by commas."
|
|
::= { endptID 95}
|
|
endptGRATARP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Gratuitous ARP flag. This variable returns 1 oif gratuitous ARP messages
|
|
are to be process; else 0."
|
|
::= { endptID 96 }
|
|
|
|
|
|
endptNVM OBJECT IDENTIFIER ::= { avaya96xxMIB 2 }
|
|
endptNVAGCHAND OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Non-Volatile Memory (NVM)Handset AGC status. This
|
|
variable returns 1 if the endpoint's handset Automatic
|
|
Gain Control capability in NVM is currently enabled, else 0."
|
|
::= { endptNVM 1 }
|
|
endptNVAGCHEAD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Headset AGC status. This variable returns 1
|
|
if the endpoint's headset Automatic Gain Control capability
|
|
in NVM is currently enabled, else 0."
|
|
::= { endptNVM 2 }
|
|
endptNVAGCSPKR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Speakerphone AGC status. This variable returns 1
|
|
if the endpoint's speakerphone Automatic Gain Control
|
|
capability in NVM is currently enabled, else 0."
|
|
::= { endptNVM 3 }
|
|
endptNVALERT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Alerting Mode flag. This variable returns 1 if
|
|
the alerting mode setting in non-volatile memory is
|
|
enabled, else 0."
|
|
::= { endptNVM 4 }
|
|
endptNVAUTH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Script file authentication flag. This variable
|
|
returns 1 if the endpoint must authenticate script files,
|
|
else 0."
|
|
::= { endptNVM 5 }
|
|
endptNVBRIGHTNESS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display Brightness setting. This variable returns
|
|
the value of the display contrast setting in non-volatile
|
|
memory. Range is 0-5, with 4 the default."
|
|
::= { endptNVM 6 }
|
|
endptNVCALLSRVR OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "NVM IP address of call server if manually entered.
|
|
Default is four zeroes."
|
|
::= { endptNVM 7 }
|
|
endptNVCHADDR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Manually-entered DHCP chaddr value. This
|
|
variable returns a manually-entered value for the DHCP
|
|
chaddr field as stored in non-volatile memory, if any.
|
|
A Hexadecimal value with range of 0 (the default) to
|
|
999999."
|
|
::= { endptNVM 8 }
|
|
endptNVCONTRAST OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display Contrast setting. This variable returns
|
|
the value of the display contrast setting in non-volatile
|
|
memory. Range is 0-15, with 8 the default."
|
|
::= { endptNVM 9 }
|
|
endptNVFILESRVR OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "NVM File server address. This variable returns
|
|
a 4-octet string specifying the IP address of the file
|
|
server as stored in NVM."
|
|
::= { endptNVM 10 }
|
|
endptNVGIPADD OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Router address. This variable returns a 4-
|
|
octet string specifying the IP address of the router as
|
|
stored in NVM."
|
|
::= { endptNVM 11 }
|
|
endptNVIPADD OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM IP address. This variable returns a 4-octet
|
|
string specifying the endpoint's IP address stored in
|
|
NVM."
|
|
::= { endptNVM 12 }
|
|
endptNVL2Q OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM 802.1Q flag. This variable returns 0 if
|
|
the Layer 2 802.1Q framing parameter in NVM is set to
|
|
'auto', 1 if it is set to on/enabled, else 2 for
|
|
off/disabled."
|
|
::= { endptNVM 13 }
|
|
endptNVL2QVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM VLAN Identifier. This variable returns an
|
|
integer between 0 and 4094 inclusive specifying the Layer
|
|
2 802.1Q VLAN Identifier value stored in NVM."
|
|
::= { endptNVM 14 }
|
|
endptNVLOGSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Event Log flag. This variable returns 0 if the
|
|
endpoint's event logging capability in NVM is currently
|
|
NOT enabled, else 1."
|
|
::= { endptNVM 15 }
|
|
endptNVNETMASK OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Subnet mask. This variable returns a 4-octet
|
|
string specifying the subnet mask as stored in NVM."
|
|
::= { endptNVM 16 }
|
|
endptNVPHY1STAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Ethernet line interface status. This
|
|
variable returns 0 if the endpoint's Ethernet line
|
|
interface in NVM iscurrently NOT enabled, 1 if the
|
|
Ethernet line interface in NVM is currently for
|
|
auto-negotiation, 2 for 10Mbps half-duplex, 3 for
|
|
10Mbps full-duplex, 4 for 100Mbps half-duplex, and
|
|
5 for 100Mbps full-duplex."
|
|
::= { endptNVM 17 }
|
|
endptNVPHY2STAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Secondary Ethernet interface setting. This
|
|
variable returns 0 if the endpoint's secondary Ethernet
|
|
interface in NVM is currently NOT enabled(or none exists),
|
|
1 if the hub is set for auto-negotiation, 2 for 10Mbps
|
|
half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps
|
|
half-duplex, and 5 for 100Mbps full-duplex."
|
|
::= { endptNVM 18 }
|
|
endptNVSSON OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM Site-specific option number. This variable
|
|
returns an integer between 128 and 254 inclusive,
|
|
specifying the SSON stored in NVM. The default is 176."
|
|
::= { endptNVM 19 }
|
|
endptNVVLANTEST OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NVM VLAN pause parameter. This variable returns
|
|
the number of seconds stored in NVM for the endppoint to
|
|
wait for a DHCPOFFER message when using a non-zero VLAN ID.
|
|
Valid values are integers from 0 to 999 inclusive."
|
|
::= { endptNVM 20 }
|
|
endptNVLANGFILE OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Language file. This variable returns the name
|
|
of the language file in non-volatile memory."
|
|
::= { endptNVM 21 }
|
|
endptNVTRUSTLIST OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of trusted certificates. This variable returns 0-255
|
|
ASCII characters: 0 or more filenames or URLs separated by commas
|
|
and without intervening spaces, containing the list of
|
|
downloaded trusted certificates in non-volatile memory."
|
|
::= { endptNVM 22 }
|
|
endptNVVOXFILE OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Voice language file. This variable returns 0-32
|
|
ASCII characters: 0 or 1filename, identifying the voice language file,
|
|
if any, in non-volatile memory."
|
|
::= { endptNVM 23 }
|
|
endptNVRINGTONESTYLE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ringing style identifier. This variable returns
|
|
the number of seconds stored in NVM for the endppoint to
|
|
wait for a DHCPOFFER message when using a non-zero VLAN ID.
|
|
Valid values are integers from 0 to 999 inclusive."
|
|
::= { endptNVM 24 }
|
|
endptNVSBM24BRIGHTNESS1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM24 backlight level. This variable returns
|
|
the value of the backlight brightness for the first SBM24 attached,
|
|
to the telephone, if any. Valid values are integers from 1 to 5 inclusive."
|
|
::= { endptNVM 25 }
|
|
endptNVSBM24BRIGHTNESS2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM24 backlight level. This variable returns
|
|
the value of the backlight brightness for the second SBM24 attached,
|
|
to the telephone, if any. Valid values are integers from 1 to 5 inclusive."
|
|
::= { endptNVM 26 }
|
|
endptNVSBM24BRIGHTNESS3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM24 backlight level. This variable returns
|
|
the value of the backlight brightness for the third SBM24 attached,
|
|
to the telephone, if any. Valid values are integers from 1 to 5 inclusive."
|
|
::= { endptNVM 27 }
|
|
|
|
|
|
endptMaintenance OBJECT IDENTIFIER ::= { avaya96xxMIB 3 }
|
|
endptAPPSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Application download flag. This variable
|
|
returns '0' if the most recent attempt to download
|
|
and store an application file was successful. This
|
|
variable returns '1' if the most recent attempt to
|
|
download an application file was successful but the
|
|
file was not successfully stored in NVM. This variable
|
|
returns '2' if the most recent attempt to download an
|
|
application file was NOT successful."
|
|
::= { endptMaintenance 1 }
|
|
endptUPGRADESTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Script loading status flag. This variable
|
|
returns '0' if a 96xxupgrade.txt file was successfully
|
|
obtained and interpreted since the last power-up or reset.
|
|
This variable returns '1' if the file was successfully
|
|
obtained but NOT successfully interpreted since the last
|
|
power-up or reset. This variable returns '2' if the file
|
|
was NOT successfully obtained since the last
|
|
power-up or reset."
|
|
::= { endptMaintenance 2 }
|
|
endptRecentLog OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EndptRecentLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry is one of up to 75 syslog event
|
|
messages added since last reset or power-up, each of
|
|
which has severity code less than the value of NVLOGLOCAL.
|
|
Entries are in chronological order, oldest first."
|
|
::= { endptMaintenance 3 }
|
|
endptRecentLogEntry OBJECT-TYPE
|
|
SYNTAX EndptRecentLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry is one of up to 75 syslog event
|
|
messages added since last reset or power-up, each of
|
|
which has severity code less than the value of NVLOGLOCAL.
|
|
Entries are in chronological order, oldest first."
|
|
INDEX { endptRecentLogText }
|
|
::= { endptRecentLog 1 }
|
|
EndptRecentLogEntry ::=
|
|
SEQUENCE {
|
|
endptRecentLogText
|
|
DisplayString
|
|
}
|
|
endptRecentLogText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Syslog event message."
|
|
::= { endptRecentLogEntry 1 }
|
|
endptResetLog OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EndptResetLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry is one of up to 75 syslog event
|
|
messages added before the last reset or power-up, each of
|
|
which has severity code less than the value of NVLOGLOCAL.
|
|
Entries are in chronological order, oldest first."
|
|
::= { endptMaintenance 4 }
|
|
endptResetLogEntry OBJECT-TYPE
|
|
SYNTAX EndptResetLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry is one of up to 75 syslog event
|
|
messages added before the last reset or power-up, each of
|
|
which has severity code less than the value of NVLOGLOCAL.
|
|
Entries are in chronological order, oldest first."
|
|
INDEX { endptResetLogText }
|
|
::= { endptResetLog 1 }
|
|
EndptResetLogEntry ::=
|
|
SEQUENCE {
|
|
endptResetLogText
|
|
DisplayString
|
|
}
|
|
endptResetLogText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Syslog event message."
|
|
::= { endptResetLogEntry 1 }
|
|
|
|
|
|
endptApps OBJECT IDENTIFIER ::= { avaya96xxMIB 4 }
|
|
endptAUDIOPATH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "User audio path. This variable returns 0 if the
|
|
telephone does not support a 2-way speaker or does not
|
|
have a headset jack; 1 if the user audio path is with the
|
|
speakerphone, and 2 if the user audio path is with the headset."
|
|
::= { endptApps 1 }
|
|
endptENHDIALSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enhanced Local Dialing status. This variable
|
|
returns 0 if the Enhanced Local Dialing status is
|
|
off/disabled, else 1."
|
|
::= { endptApps 2 }
|
|
endptSUBSCRIBELIST OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Web push subscription list. This
|
|
variable returns a string containing one or more fully
|
|
qualified URLs to which the phone's Browser application
|
|
subscribes for potential pushed content."
|
|
::= { endptApps 3 }
|
|
endptTPSLIST OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xxWeb Trusted Push Server list. This
|
|
variable returns a string containing one or more domains
|
|
and paths in DNS format, used to determine for
|
|
validation of push requests."
|
|
::= { endptApps 4 }
|
|
endptWMLEXCEPT OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Web Proxy Server Exception List. This
|
|
variable returns a string specifying a list of one or
|
|
more HTTP proxy server Exception domains, separated by
|
|
commas with no intervening spaces, up to 127 total
|
|
characters. Used by the 96xx Browser application."
|
|
::= { endptApps 5 }
|
|
endptWMLHOME OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Web application URL. This variable returns
|
|
a URL of the Home page for the 96xx Browser application."
|
|
::= { endptApps 6 }
|
|
endptWMLIDLETIME OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Web Idle Timer. This variable returns the number
|
|
of minutes, from 1 to 60 inclusive, of idle activity on the
|
|
telephone before the Web Idle Timer URI is displayed."
|
|
::= { endptApps 7 }
|
|
endptWMLIDLEURI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Web Idle Timer URI. This variable returns the
|
|
URI of the WML page displayed after the 96xxWeb
|
|
Idle Timer expires."
|
|
::= { endptApps 8 }
|
|
endptWMLPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Browser application TCP port. This variable
|
|
returns an integer specifying the TCP port most recently
|
|
used for the HTTP proxy server. Used by the 96xx
|
|
Browser application."
|
|
::= { endptApps 9 }
|
|
endptWMLPROXY OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Web Proxy Server. This variable returns
|
|
an IP addresses, in dotted-decimal or DNS format, of an
|
|
HTTP proxy server. Used by the 96xx Browser application."
|
|
::= { endptApps 10 }
|
|
endptGUESTDURATION OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Guest Login Duration. This variable
|
|
returns an integer specifying the number of hours from 1-12
|
|
for the Guest Login duration. The default is 2."
|
|
::= { endptApps 11 }
|
|
endptGUESTLOGINSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Guest Login permission flag. This variable
|
|
returns 1 if the user is allowed to initiate a Guest Login,
|
|
otherwise 0."
|
|
::= { endptApps 12 }
|
|
endptGUESTWARNING OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "96xx Guest Login Warning interval. This variable
|
|
returns an integer specifying the number of minutes from 1-15
|
|
before the expiration of a Guest Login that a warnign screen
|
|
is displayed. The default is 5."
|
|
::= { endptApps 13 }
|
|
endptPUSHCAP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Push capabilities. This variable returns a
|
|
4-digit integer specifying the phone administration for audio transmit,
|
|
audi receive, display (web), and Top Line pushes, respectively.
|
|
The valid digits are 0 (Disabled), 1 (barge-in onl ypushes of the given
|
|
type Enabled) and 2 (both barge-in and normal pushes of the given
|
|
type Enabled). The default is 2222."
|
|
::= { endptApps 14 }
|
|
endptPUSHPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Push listening port. This variable returns an
|
|
integer specifying the TCP listening port most recently
|
|
used for the HTTP server.."
|
|
::= { endptApps 15 }
|
|
endptQKLOGINSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Quick Login permission flag. This variable
|
|
returns 1 (the default) if users are permitted to use the # button
|
|
to use a previous login and password during registration, else 0."
|
|
::= { endptApps 16 }
|
|
endptSCREENSAVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Custom screen saver URL. This variable returns
|
|
a filename from 0-32 characters that specifies an image displayed
|
|
in lieu of the Avaya screen saver."
|
|
::= {endptApps 17 }
|
|
endptWMLSMALL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "9610 Web application URL. This variable returns
|
|
a URL of the Home page for the 9610 Browser application."
|
|
::= { endptApps 18 }
|
|
endptCLDELCALLBK OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Call Log Callback Deletion flag. This variable
|
|
returns 1 if a Missed Call Log entry is deleted from the Call Log
|
|
if the user Calls that entry from the Call Log, else 0 (the default) ."
|
|
::= { endptApps 19 }
|
|
endptFBONCASCREEN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Feature Buttons on Call Appearance List flag. This
|
|
variable returns 1 if administered feature buttons are allowed to be
|
|
listed on the Call Appearance Screen, else 0 (the default) ."
|
|
::= { endptApps 20 }
|
|
endptLOGBACKUP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Call Log backup permission flag. This variable
|
|
returns 1 (the default) if the telephone is to automatically store and
|
|
retrieve a file of Call Log entries, else 0."
|
|
::= { endptApps 21 }
|
|
endptLOGMISSEDONCE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Missed Call Log Counter flag. This variable
|
|
returns 1 if the telephone keeps only one Missed Call Log record for
|
|
a given Name and Number, as well as a counter of Missed calls from
|
|
that Name and Number, else 0 (the default)."
|
|
::= { endptApps 22 }
|
|
endptLOGUNSEEN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Log redirected calls permission flag. This variable
|
|
returns 1 if the telephone is to create Call Log entries for calls that
|
|
are redirected from the physical telephone, else 0 (the default)."
|
|
::= { endptApps 23 }
|
|
endptAPPSTATVALUE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Applications permission status. This variable returns the
|
|
current value of the APPSTAT parameter, which can restrict the
|
|
availability of some of the telephone applications, as documented in
|
|
the 9600 Series Admin Guide."
|
|
::= { endptApps 24 }
|
|
endptOPSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Options permission status. This variable returns the
|
|
current value of the OPSTAT parameter, which can restrict the
|
|
availability of some of the telephone options, as documented in
|
|
the 9600 Series Admin Guide."
|
|
::= { endptApps 25}
|
|
endptOPSTAT2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Options permission override parameter. This variable returns
|
|
the current value of the OPSTAT2 parameter, which can override specific
|
|
functionality of the OPSTAT parameter, as documented in the 9600
|
|
Series Admin Guide."
|
|
::= { endptApps 26 }
|
|
|
|
|
|
endptAdjuncts OBJECT IDENTIFIER ::= { avaya96xxMIB 5 }
|
|
endptBMODS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Button Module interface usage. This variable returns
|
|
the number of devicess attached (or daisy-chained) to the
|
|
endpoint through the button module interface."
|
|
::= { endptAdjuncts 1}
|
|
endptBTADHWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bluetooth adapter hardware version. This variable returns
|
|
the hardware version of an attached Bluetooth Adapter, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 2}
|
|
endptBTADSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bluetooth adapter presence. This variable returns
|
|
1 if the presence. of a Bluetooth adapter is detected, else 0."
|
|
::= { endptAdjuncts 3}
|
|
endptBTADSWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bluetooth adapter software version. This variable returns
|
|
the software version of an attached Bluetooth Adapter, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 4}
|
|
endptGIGEHWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GigE adapter hardware version. This variable returns
|
|
the hardware version of an attached GigE Adapter, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 5}
|
|
endptGIGESTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GigE adapter presence. This variable returns
|
|
1 if the presence. of a GigE adapter is detected, else 0."
|
|
::= { endptAdjuncts 6}
|
|
endptGIGESWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GigE adapter software version. This variable returns
|
|
the software version of an attached GigE Adapter, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 7}
|
|
endptSBM1HWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM #1 hardware version. This variable returns
|
|
the hardware version of the first button module, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 8}
|
|
endptSBM1SWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM #1 software version. This variable returns
|
|
the software version of the first button module, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 9}
|
|
endptSBM2HWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM #2 hardware version. This variable returns
|
|
the hardware version of the second button module, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 10}
|
|
endptSBM2SWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM #2 software version. This variable returns
|
|
the software version of the second button module, if any."
|
|
::= {endptAdjuncts 11}
|
|
endptSBM3HWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM #3 hardware version. This variable returns
|
|
the hardware version of the third button module, if any.
|
|
If none, null is returned."
|
|
::= {endptAdjuncts 12}
|
|
endptSBM3SWVER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM #3 software version. This variable returns
|
|
the software version of the third button module, if any."
|
|
::= {endptAdjuncts 13}
|
|
endptSBMSTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Button Modules attached. This variable returns
|
|
the number of Button Modules attached (or daisy-chained)
|
|
to the endpoint."
|
|
::= { endptAdjuncts 14}
|
|
endptUSBPOWER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "USB Power Provision. This variable returns 0 if
|
|
the telephone is to disable USB power, 1 if USB power is enabled
|
|
only if the telephone is Aux powered, 2 if USB power is enabled
|
|
regardless of the power source, or 3 if USB power is enabled if
|
|
the telephone is Aux powered or PoE Class 3."
|
|
::= { endptAdjuncts 15}
|
|
|
|
|
|
endptH323 OBJECT IDENTIFIER ::= { avaya96xxMIB 6 }
|
|
endptMCIPADD OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of call server addresses. This
|
|
variable returns a sequence of IP addresses, in
|
|
dotted-decimal or DNS format and separated by
|
|
commas, of call server IP addresses available
|
|
for use."
|
|
::= { endptH323 1 }
|
|
endptGKINUSE OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Gatekeeper in use address. This variable
|
|
returns a 4-octet string specifying the IP
|
|
address of the gatekeeper currently in use."
|
|
::= { endptH323 2 }
|
|
endptNVPHONEXT OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Endpoint's phone extension. This variable
|
|
returns a text string identifying the endpoint's extension,
|
|
in free text format. The default value is NULL. "
|
|
::= { endptH323 3 }
|
|
endptRASGkList OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EndptRASGkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry is one of up to 75 gatekeeper
|
|
addresses in dotted-decimal or DNS format, as downloaded from
|
|
the call server during RAS. Entries are listed in the order received."
|
|
::= { endptH323 4 }
|
|
endptRASGkEntry OBJECT-TYPE
|
|
SYNTAX EndptRASGkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry is one of up to 75 gatekeeper
|
|
addresses in dotted-decimal or DNS format, as downloaded from
|
|
the call server during RAS. Entries are listed in the order received."
|
|
INDEX { endptRASGkEntryData}
|
|
::= { endptRASGkList 1 }
|
|
EndptRASGkEntry ::=
|
|
SEQUENCE {
|
|
endptRASGkEntryData
|
|
DisplayString
|
|
}
|
|
endptRASGkEntryData OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Data for an individual RAS-provided Gatekeeper."
|
|
::= { endptRASGkEntry 1 }
|
|
endptREREGISTER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reregistration Timer value. This variable returns
|
|
the number of minutes from 1 to 120 inclusive the telephone
|
|
waits between re-registration attempts if unnamed registration
|
|
is not in effect. The default is 20 minutes."
|
|
::= { endptH323 5 }
|
|
|
|
endptSERVICESTAT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status of phone in service. This variable returns
|
|
0 if the phone is not in service nor is attempting to register,
|
|
1 if the telephone has failed Gatekeeper Discovery, 2 if the
|
|
telephone has successfully completed Gatekeeper Discovery but
|
|
has not successfully completed registration, 3 if the telephone
|
|
has successfully registered but does not have a TCP connection,
|
|
and 4 if the telephone is registered and has a TCP connection."
|
|
::= { endptH323 6 }
|
|
endptGKTCPPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Gatekeeper Port. This variable returns 0 if the
|
|
telephone is not currently registered, otherwise it returns the
|
|
TCP port number on the gatekeeper with which the telephone
|
|
has a signaling connection established."
|
|
::= { endptH323 7 }
|
|
|
|
endptCERT OBJECT IDENTIFIER ::= { avaya96xxMIB 8 }
|
|
endptMYCERTCAID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Certificate Authority ID. This variable returns the
|
|
Certificate Authority Identifier to be used in a certificate request."
|
|
::= { endptCERT 1 }
|
|
endptMYCERTCN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Certificate Common Name. This variable returns the
|
|
Common Name of the Subject of a certificate request."
|
|
::= { endptCERT 2 }
|
|
endptMYCERTDN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Certificate Distinguished Name. This variable returns additional information (sometimes
|
|
common country and organizational information) that, together with the Common
|
|
Name, is used to create a Distinguished Name."
|
|
::= { endptCERT 3 }
|
|
endptMYCERTKEYLEN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Key length. This variable returns the bit length of the public and private keys generated
|
|
for a certificate request"
|
|
::= { endptCERT 4 }
|
|
endptMYCERTRENEW OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Certificate Renewal interval. This variable returns the percentage of a certificate Validity
|
|
interval after which renewal procedures will be initiated."
|
|
::= { endptCERT 5 }
|
|
endptMYCERTURL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SCEP URL. This variable returns the URL to be used
|
|
to contact an SCEP server."
|
|
::= { endptCERT 6 }
|
|
endptMYCERTWAIT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Certificate wait flag. This variable returns 0 if the
|
|
telephone will wait until a pending certificate request is
|
|
complete, else 1 if it will periodically check in the background."
|
|
::= { endptCERT 7 }
|
|
|
|
|
|
endptVPN OBJECT IDENTIFIER ::= { avaya96xxMIB 9 }
|
|
endptALWCLRNOTIFY OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ISAKP Notification flag. This variable returns 1 if
|
|
unencrypted ISAKMP Notification Payloads will be accepted, else 0."
|
|
::= { endptVPN 1 }
|
|
endptAUTHTYPE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Authentication Method. This variable returns 3 if the VPN authentication
|
|
method is Pre-Shared Key (PSK); 4 if the method is PSK with XAUTH, 5 if the method is RSA
|
|
signatures with XAUTH, 6 if the method is Hybrid XAUTH, and 7 if the method is RSA
|
|
signatures."
|
|
::= { endptVPN 2 }
|
|
endptCFGPROF OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Configuration Profile. This variable returns 2 if the VPN Configuration Profile
|
|
is based on Checkpoint Security Gateway, 3 if the profile is based on Cisco PSK with XAUTH,
|
|
5 if the profile is based on Juniper PSK with XAUTH, 6 if the profile is based on Generic PSK,
|
|
8 if the profile is based on Cisco Cert. with XAUTH, 9 if the profile is based on Juniper Cert.
|
|
with XAUTH, or 11 if the profile is based on Nortel Contivity."
|
|
::= { endptVPN 3 }
|
|
endptCOPYTOS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TOS Copy flag. This variable returns 1 if the value of the TOS bits will be copied
|
|
from the inner IP header to the outer IP header, else this variable returns 2 and the TOS
|
|
bits of the outer IP header will be set to 0."
|
|
::= { endptVPN 4 }
|
|
endptDHCPSRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of DHCP server addresses. This variable returns a sequence of zero or more
|
|
IP addresses, in dotted-decimal format and separated by commas, of enterprise DHCP
|
|
servers from which configuration parameters may be requested through a VPN tunnel
|
|
via a DHCPINFORM message."
|
|
::= { endptVPN 5 }
|
|
endptDROPCLEAR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Clear IPSec packet treatment. This variable returns 1 if received unencrypted
|
|
(clear) IPsec packets are to be dropped, else 0"
|
|
::= { endptVPN 6 }
|
|
endptENCAPS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Encapsulation Port Numbers. This variable returns 0 if negotiation of NAT
|
|
traversal is as specified in IETF RFC 3947 (except that IKE negotiation begins with a
|
|
source port of 2070 and that source port continues to be used unless the source and
|
|
destination port numbers are changed to 4500, 1 if UDP encapsulation of the inner IP
|
|
layer will not be provided and negotiation of NAT traversal as specified in IETF RFC 3947
|
|
is not supported, 2 if negotiation of NAT traversal is as specified in IETF RFC 3947
|
|
(except IKE uses source port 2070 and the source and destination port numbers are not
|
|
subsequently changed), or 4 if negotiation of NAT traversal is as specified in IETF RFC 3947."
|
|
::= { endptVPN 7 }
|
|
endptEXTDNSSRVR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of external DNS server addresses. This variable returns a sequence of IP
|
|
addresses, in dotted-decimal format and separated by commas, of DNS servers available for
|
|
use outside of the VPN tunnel when in VPN mode."
|
|
::= { endptVPN 8 }
|
|
endptEXTGIPADD OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of external router addresses. This variable returns a sequence of IP addresses,
|
|
in dotted-decimal format and separated by commas, of routers available for use outside of
|
|
the VPN tunnel when in VPN mode."
|
|
::= { endptVPN 9 }
|
|
endptEXTIPADD OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Endpoint External IP address. This variable returns a 4-octet string specifying the
|
|
endpoint's current outer IP address when in VPN mode."
|
|
::= { endptVPN 10 }
|
|
endptEXTNETMASK OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "External Subnet mask. This variable returns a 4-octet string specifying the subnet
|
|
mask to be used outside of the VPN tunnel when in VPN mode."
|
|
::= { endptVPN 11 }
|
|
endptIKECONFIGMODE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Configuration flag. This variable returns 1 if the ISAKMP configuration method
|
|
to be used, else 2.."
|
|
::= { endptVPN 12 }
|
|
endptIKEDH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use Diffie-Hellman Group for IKE SA. This variable returns the negotiated IKE Phase 1
|
|
DH Group number."
|
|
::= { endptVPN 13 }
|
|
endptIKEDHGRP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Proposed Diffie-Hellman Group for IKE SA. This variable returns 1 if the DH Group
|
|
Description proposed for IKE Phase 1 is the First Oakley Group, 2 if the proposal is for the
|
|
Second Oakley Group, 5 if the proposal is for the 1536-bit MODP Group, 14 if the proposal is
|
|
for the 2048-bit MODP Group, and 15 if the proposal is for the 3072-bit MODP Group, else 0."
|
|
::= { endptVPN 14 }
|
|
endptIKEID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Phase 1 identity, This variable returns the identity (also known as in XAUTH as
|
|
group name) used during IKE Phase 1 negotiation."
|
|
::= { endptVPN 15 }
|
|
endptIKEIDTYPE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE SA identification type. This varable returns 1 if the Identification Type used for
|
|
IKE Phase 1 is ID_IPV4_ADDR, 2 if the ID Type is ID_FQDN, 3 if the ID Type is ID_USER_FQDN,
|
|
9 if the ID Type is ID_DER_ASN1_DN, and 11 if the ID Type is ID_KEY_ID."
|
|
::= { endptVPN 16 }
|
|
endptIKEOVERTCP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE TCP usage policy. This variable returns 0 if IKE is only to use UDP, 1 if TCP is to be
|
|
tried after an IKE times out using UDP, or 2 if only TCP is to be used."
|
|
::= { endptVPN 17 }
|
|
endptIKEP1AUTH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use IKE Phase 1 authentication algorithm. This variable returns 1 if MD5 was negotiated,
|
|
and 2 if SHA was negotiated."
|
|
::= { endptVPN 18 }
|
|
endptIKEP1AUTHALG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Proposed IKE Phase 1 authentication algorithm. This variable returns 0 if if either hash
|
|
algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:."
|
|
::= { endptVPN 19 }
|
|
endptIKEP1ENC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use IKE Phase 1 encryption algorithm. This variable returns 1 if AES-CBC-128 was
|
|
negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192 was
|
|
negotiated, or 5 if AES-CBC-256 was negotiated."
|
|
::= { endptVPN 20 }
|
|
endptIKEP1ENCALG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm
|
|
is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if
|
|
DES-CBC is proposed, 4 if AES-CBC-192 is proposed, and 5 if AES-CBC-256 is proposed."
|
|
::= { endptVPN 21 }
|
|
endptIKEP1LIFESEC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Security Association lifetime. This variable returns the proposed number of seconds
|
|
for the SA Life Duration for IKE Phase 1."
|
|
::= { endptVPN 22 }
|
|
endptIKEP2AUTH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use IKE Phase 2 authentication algorithm. This variable returns 1 if MD5 was
|
|
negotiated, and 2 if SHA was negotiated."
|
|
::= { endptVPN 23 }
|
|
endptIKEP2AUTHALG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Phase 2 authentication algorithm. This variable returns 0 if either hash algorithm
|
|
is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:."
|
|
::= { endptVPN 24 }
|
|
endptIKEP2ENC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use IKE Phase 2 encryption algorithm. This variable returns 1 if AES-CBC-128 was
|
|
negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192
|
|
was negotiated, 5 if AES-CBC-256 was negotiated, or 6 if NULL encryption was negotiated."
|
|
::= { endptVPN 25 }
|
|
endptIKEP2ENCALG OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm
|
|
is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if
|
|
DES-CBC is proposed, 4 if AES-CBC-192 is proposed, 5 if AES-CBC-256 is proposed, and 6 if
|
|
NULLencryption is proposed."
|
|
::= { endptVPN 26 }
|
|
endptIKEP2LIFESEC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPsec Security Association lifetime. This variable returns the proposed number of seconds
|
|
for the SA Life Duration for IKE Phase 2."
|
|
::= { endptVPN 27 }
|
|
endptIKESALIFEKB OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Security Association KB Lifetime. This variable returns the IKE SA lifetime in kilobytes."
|
|
::= { endptVPN 28 }
|
|
endptIKESALIFESEC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Security Association time Lifetime. This variable returns the IKE SA lifetime in seconds."
|
|
::= { endptVPN 29 }
|
|
endptIKETRANSPORT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use IKE transport protocol. This variable returns 0 if IKE is not in use, 1 if UDP is being
|
|
used for IKE transport, or 2 if TCP is being used for IKE transport."
|
|
::= { endptVPN 30 }
|
|
endptIKEXCHGMODE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IKE Phase 1 negotiation mode. This variable returns 1 if the IKE Phase 1 exchange usesd is
|
|
Aggressive Mode, else 2 for Main Mode. "
|
|
::= { endptVPN 31 }
|
|
endptIPSECSALIFEKB OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPsec Security Association KB Lifetime. This variable returns the IPsec SA lifetime in
|
|
kilobytes."
|
|
::= { endptVPN 32 }
|
|
endptIPSECSALIFESEC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPsec Security Association time Lifetime. This variable returns the IPsec SA lifetime
|
|
in seconds."
|
|
::= { endptVPN 33 }
|
|
endptIPSECSUBNET OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Tunnel IP Address ranges. This variable returns the IP address ranges that will use
|
|
the VPN tunnel, with 0.0.0.0/0 meaning all IP addresses."
|
|
::= { endptVPN 34 }
|
|
endptNORTELAUTH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nortel gateway authentication method. If Nortel gateway user authentication is to
|
|
be used, this variable returns 1 if a local username and password are to be used; 2 if a RADIUS
|
|
username and password are to be used, 3 if RADIUS SecurID is to be used, and 4 if RADIUS Axent
|
|
is to be used.."
|
|
::= { endptVPN 35 }
|
|
endptPFSDH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In-Use Diffie-Hellman Group for IPsec SA. This variable returns the negotiated IKE PFS
|
|
DH Group number."
|
|
::= { endptVPN 36 }
|
|
endptPFSDHGRP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Diffie-Hellman Group for IPsec SA. This variable returns 1 if the DH Group Description
|
|
proposed for IPSec SA is the First Oakley Group, 2 if the proposal is for the Second Oakley Group,
|
|
5 if the proposal is for the 1536-bit MODP Group, 14 if the proposal is for the 2048-bit MODP Group,
|
|
and 15 if the proposal is for the 3072-bit MODP Group, else 0."
|
|
::= { endptVPN 37 }
|
|
endptPSWDTYPE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Password Permissions. This variable returns 1 if the password may be alphanumeric
|
|
and is to be stored in non-volatile memory as the value of NVVPNPSWD, 2 if the password may be
|
|
alphanumeric and is to be stored in volatile memory that will be cleared when the telephone resets,
|
|
3 if the password may be numeric-only and is to be stored in volatile memory that will be cleared
|
|
mmediately after the first time the password is used (this is for use with numeric-only one-time token
|
|
devices), 4 if the password may be alphanumeric and is to be stored in volatile memory that will be
|
|
cleared immediately after the first time the password is used, and 5 if the password may be
|
|
alphanumeric and is to be stored in volatile memory that is cleared when the user invokes VPN
|
|
Sleep Mode and when the telephone resets."
|
|
::= { endptVPN 38 }
|
|
endptSGINUSE OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Security Gateway address. This variable returns a 4-octet string specifying the IP
|
|
address of the VPN Security Gateway in use, else 0.0.0.0."
|
|
::= { endptVPN 39 }
|
|
endptSGIP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Security Gateway list. This variable returns the list of VPN security gateway IP
|
|
addresses available to the telephone."
|
|
::= { endptVPN 40}
|
|
endptSGVENDOR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Security Gateway Vendor. This variable returns 1 if the IKE implementation matches
|
|
Juniper/NetScreen, 2 if it matches Cisco, 3 if it matches Check Point/Nokia, 5 if it matches
|
|
Nortel, otherwise 4."
|
|
::= { endptVPN 41 }
|
|
endptSGVERSION OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Security Gateway Version. This variable returns the version information, if any,
|
|
of the Security Gateway with wich the telephone has a VPN tunnel established, else NULL."
|
|
::= { endptVPN 42 }
|
|
endptVPNMODE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN Support Specification. This variable returns 1 if VPN functionality is enabled, else 0."
|
|
::= { endptVPN 43 }
|
|
endptVPNUSER OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN User Name. This variable returns the user name to be used during authentication. "
|
|
::= { endptVPN 44 }
|
|
endptVPNUSERTYPE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VPN User Name Permissions. This variable returns 1 if the user can change the VPN username,
|
|
else 0."
|
|
::= { endptVPN 45 }
|
|
endptXAUTH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "XAUTH status. This variable returns 2 if XAUTH is disabled, else 1."
|
|
::= { endptVPN 46 }
|
|
|
|
END
|
|
|