Observium_CE/mibs/aruba/ARUBAWIRED-POWERSUPPLY-MIB

275 lines
10 KiB
Plaintext

--**MOD+************************************************************************
--* Module: ARUBAWIRED-POWERSUPPLY-MIB :POWERSUPPLY MIB file
--*
--* (c) Copyright 2020,2023 Hewlett Packard Enterprise Development LP
--* All Rights Reserved.
--*
--* The contents of this software are proprietary and confidential
--* to the Hewlett-Packard Development Company, L.P. No part of this
--* program may be photocopied, reproduced, or translated into another
--* programming language without prior written consent of the
--* Hewlett-Packard Development Company, L.P.
--*
--* Purpose: This file contains MIB definition of ARUBAWIRED-POWERSUPPLY-MIB
--*
--**MOD-************************************************************************
ARUBAWIRED-POWERSUPPLY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString
FROM SNMPv2-TC
arubaWiredChassisMIB
FROM ARUBAWIRED-CHASSIS-MIB;
arubaWiredPowerSupply MODULE-IDENTITY
LAST-UPDATED "202305090000Z" -- May 9, 2023
ORGANIZATION "HPE/Aruba Networking Division"
CONTACT-INFO "Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION
"This MIB module describes management objects that manage Power
Supply Units."
REVISION "202305090000Z" -- May 9, 2023
DESCRIPTION "Added states in arubaWiredPSUStateEnum."
REVISION "202303280000Z" -- March 28, 2023
DESCRIPTION "Added arubaWiredPSUStateEnum."
REVISION "202001070000Z" -- January 7, 2020
DESCRIPTION "Initial revision."
::= { arubaWiredChassisMIB 2 }
-- **********************************************************************
-- Power supply notifications
-- **********************************************************************
arubaWiredPSUNotifications OBJECT IDENTIFIER ::= { arubaWiredPowerSupply 0 }
arubaWiredPSUStateNotification NOTIFICATION-TYPE
OBJECTS {
arubaWiredPSUGroupIndex,
arubaWiredPSUSlotIndex,
arubaWiredPSUState
}
STATUS current
DESCRIPTION
"A notification generated when a PSU state change occurs. This
can happen if a PSU is powerd on, powerd off, inserted, removed,
or experiences a fault."
::= { arubaWiredPSUNotifications 1 }
-- **********************************************************************
-- Power Supply Objects
-- **********************************************************************
arubaWiredPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArubaWiredPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains one row per switch power supply entity."
::= { arubaWiredPowerSupply 1 }
arubaWiredPowerSupplyEntry OBJECT-TYPE
SYNTAX ArubaWiredPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about the power supply physical entity table."
INDEX { arubaWiredPSUGroupIndex , arubaWiredPSUSlotIndex }
::= { arubaWiredPowerSupplyTable 1 }
ArubaWiredPowerSupplyEntry ::=
SEQUENCE {
arubaWiredPSUGroupIndex Integer32,
arubaWiredPSUSlotIndex Integer32,
arubaWiredPSUName DisplayString,
arubaWiredPSUState DisplayString,
arubaWiredPSUProductName DisplayString,
arubaWiredPSUSerialNumber DisplayString,
arubaWiredPSUInstantaneousPower Integer32,
arubaWiredPSUMaximumPower Integer32,
arubaWiredPSUNumberFailures Integer32,
arubaWiredPSUAirflowDirection DisplayString,
arubaWiredPSUStateEnum INTEGER
}
arubaWiredPSUGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable uniquely identifies the group containing the
power supply. Group means chassis in the stack and the value
1 MUST be used for non-modular devices."
::= { arubaWiredPowerSupplyEntry 1 }
arubaWiredPSUSlotIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable uniquely identifies the power supply in a
chassis and value 1 must be used for non-modular devices."
::= { arubaWiredPowerSupplyEntry 2 }
arubaWiredPSUName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identification of the power supply for the system."
::= { arubaWiredPowerSupplyEntry 3 }
arubaWiredPSUState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status for the power supply."
::= { arubaWiredPowerSupplyEntry 4 }
arubaWiredPSUProductName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power supply product name identification. This field is used
to determine if the power supply is supported."
::= { arubaWiredPowerSupplyEntry 5 }
arubaWiredPSUSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power supply serial number to uniquely identify the power
supply."
::= { arubaWiredPowerSupplyEntry 6 }
arubaWiredPSUInstantaneousPower OBJECT-TYPE
SYNTAX Integer32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total instantaneous power supplied by the power supply in
Watts."
DEFVAL { 0 }
::= { arubaWiredPowerSupplyEntry 7 }
arubaWiredPSUMaximumPower OBJECT-TYPE
SYNTAX Integer32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total maximum power capacity that can be supplied by the
power supply in Watts."
DEFVAL { 0 }
::= { arubaWiredPowerSupplyEntry 8 }
arubaWiredPSUNumberFailures OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of failures the power supply has experienced since the
most recent insertion of the power supply and boot of the
system. The number of failures for a power supply will be
cleared if the power supply is removed from the system or if
the system is rebooted. For non removable power supplies,
the number of failures will not clear until the system
reboots. Failures are any events where power delivery from
the power supply did not occur when expected. This includes
unsupported power supply types since their power delivery is
not considered valid even though the power supply itself may
not have an internal failure. Some examples of failures are
over current, invalid input power, and unsupported power
supply type."
DEFVAL { 0 }
::= { arubaWiredPowerSupplyEntry 9 }
arubaWiredPSUAirflowDirection OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power Supply airflow direction."
::= { arubaWiredPowerSupplyEntry 10 }
arubaWiredPSUStateEnum OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
faultAbsent (2),
faultInput (3),
faultOutput (4),
faultPOE (5),
faultNoRecov (6),
alert (7),
unknown (8),
unsupported (9),
warning (10),
init (11),
empty (12),
faultAirflow (13),
faultRedundancy(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status for the power supply as an enumerated value."
::= { arubaWiredPowerSupplyEntry 11 }
-- **********************************************************************
-- compliance statements
-- **********************************************************************
arubaWiredPowerSupplyConformance OBJECT IDENTIFIER
::= { arubaWiredPowerSupply 99 }
arubaWiredPowerSupplyCompliances OBJECT IDENTIFIER
::= { arubaWiredPowerSupplyConformance 1 }
arubaWiredPowerSupplyGroups OBJECT IDENTIFIER
::= { arubaWiredPowerSupplyConformance 2 }
arubaWiredPowerSupplyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "A compliance statement for Aruba switch chassis."
MODULE
MANDATORY-GROUPS
{
arubaWiredPowerSupplyTable,
arubaWiredPSUNotificationsGroup
}
GROUP arubaWiredPowerSupplyTableGroup
DESCRIPTION "A Collection of Object(s) that display the current power
supply parameters information."
::= { arubaWiredPowerSupplyCompliances 1 }
arubaWiredPowerSupplyTableGroup OBJECT-GROUP
OBJECTS {
arubaWiredPSUGroupIndex,
arubaWiredPSUSlotIndex,
arubaWiredPSUName,
arubaWiredPSUState,
arubaWiredPSUProductName,
arubaWiredPSUSerialNumber,
arubaWiredPSUInstantaneousPower,
arubaWiredPSUMaximumPower,
arubaWiredPSUNumberFailures,
arubaWiredPSUAirflowDirection,
arubaWiredPSUStateEnum
}
STATUS current
DESCRIPTION "A collection of objects display configuration, status,
and measurements of Power Supply table."
::= { arubaWiredPowerSupplyGroups 1 }
arubaWiredPSUNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { arubaWiredPSUStateNotification }
STATUS current
DESCRIPTION "Notifications sent by power management."
::= { arubaWiredPowerSupplyGroups 2 }
END