1904 lines
68 KiB
Plaintext
1904 lines
68 KiB
Plaintext
-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved
|
|
|
|
-- /*****************************************************************
|
|
-- * *
|
|
-- * $Id: fsos3.mib,v 1.12 2015/03/08 11:07:34 siva Exp $ *
|
|
-- * fsos3.mib *
|
|
-- * *
|
|
-- * OSPFv3 Proprietary MIB. *
|
|
-- * *
|
|
-- ****************************************************************/
|
|
ARICENT-OSPFV3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Enterprises MIB for OSPFV3 source code product.
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
|
|
Integer32, IpAddress, enterprises, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, RowStatus,DisplayString, DateAndTime
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
InetAddressType, InetAddress, InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB
|
|
AreaID, BigMetric, Status, RouterID
|
|
FROM OSPF-MIB
|
|
ospfv3NbrEntry, ospfv3RouterId, ospfv3RestartStatus, ospfv3RestartInterval,
|
|
ospfv3RestartExitReason, ospfv3NbrRestartHelperStatus,
|
|
ospfv3NbrRestartHelperAge, ospfv3NbrRestartHelperExitReason,
|
|
ospfv3VirtNbrRestartHelperStatus, ospfv3VirtNbrRestartHelperAge,
|
|
ospfv3VirtNbrRestartHelperExitReason, ospfv3VirtIfEntry
|
|
FROM OSPFV3-MIB;
|
|
|
|
-- org OBJECT IDENTIFIER ::= { iso(1) 3 }
|
|
-- dod OBJECT IDENTIFIER ::= { org 6 }
|
|
-- internet OBJECT IDENTIFIER ::= { dod 1 }
|
|
-- mgmt OBJECT IDENTIFIER ::= { internet 2 }
|
|
-- private OBJECT IDENTIFIER ::= { internet 4 }
|
|
-- enterprises OBJECT IDENTIFIER ::= { iso(1) org(3) dod(6) internet(1) private(4) 1 }
|
|
-- mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
|
|
|
|
|
|
futospfv3 MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION
|
|
" Changed the Enterprises MIB from SNMPv1 syntax MIB to SNMPv2
|
|
syntax MIB"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
" Changed the Enterprises MIB from SNMPv1 syntax MIB to SNMPv2
|
|
syntax MIB"
|
|
|
|
::= { enterprises futuresoftware (2076) 90 }
|
|
|
|
--future OBJECT IDENTIFIER ::= { enterprises 2076}
|
|
--futOspfv3 OBJECT IDENTIFIER ::= { future 90 }
|
|
--::= { 1 3 6 1 4 1 2076 90 }
|
|
|
|
|
|
-- OSPF General Variables
|
|
-- These parameters apply globally to the Router's
|
|
-- OSPF Process.
|
|
|
|
futospfv3GeneralGroup OBJECT IDENTIFIER ::= { futospfv3 1 }
|
|
futOspfv3Notification OBJECT IDENTIFIER ::= { futospfv3 101 }
|
|
|
|
-- SCALAR_TABLE_BEGIN futOspfv3GeneralGroup 7
|
|
|
|
futOspfv3OverFlowState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether router is in overflow state or not."
|
|
DEFVAL { false }
|
|
::= { futospfv3GeneralGroup 1 }
|
|
|
|
futOspfv3TraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to define level of trace required for OSPF.
|
|
Levels are defined as follows.
|
|
0x00000100 -- Packet High Level Dump Trace.
|
|
0x00000200 -- Packet Low Level Dump Trace.
|
|
0x00000400 -- Packet Hex Dump Trace.
|
|
0x00000800 -- Critical Trace.
|
|
0x00001000 -- Function Entry Trace.
|
|
0x00002000 -- Function Exit Trace.
|
|
0x00004000 -- Memory Allocation Success Trace.
|
|
0x00008000 -- Memory Allocation Failure Trace.
|
|
0x00010000 -- Hello packet Trace.
|
|
0x00020000 -- DDP packet Trace.
|
|
0x00040000 -- Link State Request Packet Trace.
|
|
0x00080000 -- Link State Update Packet Trace.
|
|
0x00100000 -- Link State Acknowledge Packet Trace.
|
|
0x00200000 -- Interface State Machine Trace.
|
|
0x00400000 -- Neighbor State Machine Trace.
|
|
0x00800000 -- Routing Table Calculation Trace.
|
|
0x01000000 -- RTM Module Trace.
|
|
0x02000000 -- Interface Trace.
|
|
0x04000000 -- NSSA Trace.
|
|
0x08000000 -- Route Aggregation Trace.
|
|
0x10000000 -- Configuration Trace.
|
|
0x20000000 -- Adjacency formation Trace.
|
|
0x40000000 -- Link State Database Trace.
|
|
0x80000000 -- Protocol Packet Processing Trace."
|
|
|
|
DEFVAL { '00000800'H }
|
|
::= { futospfv3GeneralGroup 2 }
|
|
|
|
futOspfv3ABRType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standardABR (1),
|
|
ciscoABR (2),
|
|
ibmABR (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Different Types of ABRs supported"
|
|
REFERENCE
|
|
"RFC-3509 -- Alternative Implementations of OSPF Area Border
|
|
Routers"
|
|
DEFVAL { standardABR }
|
|
::= { futospfv3GeneralGroup 3 }
|
|
|
|
futOspfv3NssaAsbrDefRtTrans OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1) ,
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the P-Bit setting for the default Type-7
|
|
LSA generated by ASBR(which is not ABR).When set
|
|
disabled, P-Bit is clear in the generated default Lsa.
|
|
When set to enabled, P-Bit is set in the generated
|
|
Type-7 default Lsa. "
|
|
DEFVAL { disabled }
|
|
::= { futospfv3GeneralGroup 4 }
|
|
|
|
futOspfv3DefaultPassiveInterface OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to true all OSPF interfaces created after this
|
|
setting will be passive interfaces.
|
|
If set to false OSPF interfaces created after this setting
|
|
will not be passive."
|
|
DEFVAL { false }
|
|
::= { futospfv3GeneralGroup 5 }
|
|
|
|
futOspfv3SpfDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Delay at which routing calculation is carried after a
|
|
topology change."
|
|
DEFVAL {5}
|
|
::= { futospfv3GeneralGroup 6 }
|
|
|
|
futOspfv3SpfHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The minimum time between two consecutive SPF calculations."
|
|
DEFVAL {10}
|
|
::= { futospfv3GeneralGroup 7 }
|
|
|
|
futOspfv3RTStaggeringInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1000..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object denotes the time interval in milliseconds after which the route
|
|
calculation is suspended for doing all other OSPFv3 operations. Refault value of
|
|
this object is equal to Hello Interval"
|
|
DEFVAL {10000}
|
|
::= { futospfv3GeneralGroup 8 }
|
|
|
|
futOspfv3RTStaggeringStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of route table calculation
|
|
staggering option"
|
|
DEFVAL { enable }
|
|
::= { futospfv3GeneralGroup 9 }
|
|
|
|
-- OSPFv3 Graceful Restart related MIB objects
|
|
|
|
futOspfv3RestartStrictLsaChecking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if strict LSA checking is enabled for graceful restart.
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL { false }
|
|
::= { futospfv3GeneralGroup 10 }
|
|
|
|
futOspfv3HelperSupport OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
unknown (0),
|
|
softwareRestart (1),
|
|
swReloadUpgrade (2),
|
|
switchToRedundant(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's helper support for OSPFv3 graceful restart.
|
|
Options include: unknown,softwarerestart,swreloadupgrade,
|
|
switchtoredundant.
|
|
futOspfv3HelperSupport is indicated by bitmap.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage.
|
|
By default, all bits are set."
|
|
|
|
::= { futospfv3GeneralGroup 11 }
|
|
|
|
futOspfv3HelperGraceTimeLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured OSPFv3 graceful restart interval limit in helper side.
|
|
Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's
|
|
grace period received from grace LSA.
|
|
This object is persistent and when written the entity
|
|
SHOULD save the change to non-volatile storage."
|
|
DEFVAL {0}
|
|
::= { futospfv3GeneralGroup 12 }
|
|
|
|
futOspfv3RestartAckState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates Reception required / not-required . whether GraceLSAs
|
|
sent by this router are expected to be acknowledged by peers.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL {enabled}
|
|
::= { futospfv3GeneralGroup 13 }
|
|
|
|
futOspfv3GraceLsaRetransmitCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..180)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of retransmissions for unacknowledged GraceLSAs"
|
|
DEFVAL {2}
|
|
::= { futospfv3GeneralGroup 14 }
|
|
|
|
futOspfv3RestartReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
softwareRestart (1),
|
|
swReloadUpgrade (2),
|
|
switchToRedundant(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's restarter reason code of OSPFv3 graceful restart.
|
|
Options include: unknown,softwarerestart,swreloadupgrade,
|
|
switchtoredundant.
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
|
|
DEFVAL {unknown}
|
|
::= { futospfv3GeneralGroup 15 }
|
|
|
|
futOspfv3ExtTraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to define level of trace required for OSPFv3 GR.
|
|
Levels are defined as follows.
|
|
0x00000000 -- No Trace Support.
|
|
0x00000001 -- Restarting Router Trace.
|
|
0x00000002 -- Helper Trace."
|
|
::= { futospfv3GeneralGroup 16 }
|
|
|
|
futOspfv3SetTraps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to enable and disable specific
|
|
OSPFv3 traps. Currently the following are defined
|
|
0x00000000 - Traps are not enabled.
|
|
0x00000001 - Restarting router status changes
|
|
0x00000002 - Nieghbor Helper status changes
|
|
0x00000004 - Virtual Neighbor Helper Status Changes.
|
|
0x00000008 - Hot Standby state changes"
|
|
::= { futospfv3GeneralGroup 17 }
|
|
|
|
-- Start of Scalar MIB objects related to OSPFv3 Hot-Standby
|
|
|
|
futOspfv3HotStandbyAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Availabilty feature enabled or disabled in OSPFv3"
|
|
::= { futospfv3GeneralGroup 18 }
|
|
|
|
futOspfv3HotStandbyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init(1),
|
|
activeStandbyUp(2),
|
|
activeStandbyDown(3),
|
|
standby(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal State of the OSPFv3 instance.
|
|
init(1) - OSPFv3 instance is up and RM State is undetermined.
|
|
activeStandbyUp(2) - The RM state is active & standby is up.
|
|
activeStandbyDown(3) - The RM state is active & standby down.
|
|
standby(4) - The RM state is standby."
|
|
|
|
::= { futospfv3GeneralGroup 19 }
|
|
|
|
futOspfv3DynamicBulkUpdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notStarted(1),
|
|
inProgress(2),
|
|
completed(3),
|
|
aborted(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of dynamic bulk update between active and dynamic
|
|
OSPFv3 instance.
|
|
notStarted(1): Dynamic Bulk Update has not yet been started.
|
|
inProgress(2): Dynamic Bulk Update is in Progress.
|
|
completed (3): Dynamic Bulk Update is complete.
|
|
aborted (4): Dynamic Bulk Update is aborted."
|
|
::= { futospfv3GeneralGroup 20 }
|
|
|
|
futOspfv3StandbyHelloSyncCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of hello packets synced to standby node."
|
|
::= { futospfv3GeneralGroup 21 }
|
|
|
|
futOspfv3StandbyLsaSyncCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of LSAs synced to standby node."
|
|
::= { futospfv3GeneralGroup 22 }
|
|
|
|
futOspfv3BfdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables BFD feature in OSPFv3.
|
|
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring"
|
|
DEFVAL { disabled }
|
|
::= { futospfv3GeneralGroup 23 }
|
|
|
|
futOspfv3BfdAllIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables BFD for all OSPFv3 interfaces.
|
|
If enabled, OSPFv3 registers with BFD for neighbor
|
|
IP path monitoring, when the OSPFv3 neighbor state
|
|
is FULL. Enabling this object internally enables BFD for all the
|
|
interface entries.
|
|
|
|
If disabled, OSPFv3 de-registers from BFD for all the neighbors
|
|
associated with any of the OSPFv3 interface and does not allow any
|
|
registration with BFD for neighbor Path monitoring"
|
|
DEFVAL { disabled }
|
|
::= { futospfv3GeneralGroup 24 }
|
|
|
|
-- SCALAR_TABLE_END futOspfv3GeneralGroup
|
|
|
|
-- OSPF Interface Table
|
|
-- The futOspfv3IfTable is an extention to the ospfIfTable
|
|
-- and has statistical information associted with each interface.
|
|
|
|
futOspfv3IfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface Table describes the inter-
|
|
faces from the viewpoint of OSPFv3."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters."
|
|
::= { futospfv3 2 }
|
|
|
|
futOspfv3IfEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface Entry describes one inter-
|
|
face from the viewpoint of OSPFv3."
|
|
INDEX { futOspfv3IfIndex }
|
|
::= { futOspfv3IfTable 1 }
|
|
|
|
FutOspfv3IfEntry ::= SEQUENCE {
|
|
futOspfv3IfIndex InterfaceIndex,
|
|
futOspfv3IfOperState INTEGER,
|
|
futOspfv3IfPassive TruthValue,
|
|
futOspfv3IfNbrCount Gauge32,
|
|
futOspfv3IfAdjCount Gauge32,
|
|
futOspfv3IfHelloRcvd Counter32,
|
|
futOspfv3IfHelloTxed Counter32,
|
|
futOspfv3IfHelloDisd Counter32,
|
|
futOspfv3IfDdpRcvd Counter32,
|
|
futOspfv3IfDdpTxed Counter32,
|
|
futOspfv3IfDdpDisd Counter32,
|
|
futOspfv3IfLrqRcvd Counter32,
|
|
futOspfv3IfLrqTxed Counter32,
|
|
futOspfv3IfLrqDisd Counter32,
|
|
futOspfv3IfLsuRcvd Counter32,
|
|
futOspfv3IfLsuTxed Counter32,
|
|
futOspfv3IfLsuDisd Counter32,
|
|
futOspfv3IfLakRcvd Counter32,
|
|
futOspfv3IfLakTxed Counter32,
|
|
futOspfv3IfLakDisd Counter32,
|
|
futOspfv3IfLinkLSASuppression TruthValue,
|
|
futOspfv3IfBfdState INTEGER,
|
|
futOspfv3IfCryptoAuthType INTEGER,
|
|
futOspfv3IfCryptoAuthMode INTEGER,
|
|
futOspfv3IfAuthTxed Counter32,
|
|
futOspfv3IfAuthRcvd Counter32,
|
|
futOspfv3IfAuthDisd Counter32
|
|
}
|
|
|
|
futOspfv3IfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of this OSPFv3 interface.
|
|
It corresponds to the interface index of the
|
|
IPv6 interface on which OSPFv3 is configured."
|
|
::= { futOspfv3IfEntry 1 }
|
|
|
|
futOspfv3IfOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operup (1),
|
|
operdown (2),
|
|
loopback (3),
|
|
unloop (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Operational Status of the Interface."
|
|
::= { futOspfv3IfEntry 2 }
|
|
|
|
futOspfv3IfPassive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to make the inteface as passive.
|
|
If set to TRUE, then interface will be passive
|
|
If set to FALSE then interface will be normal"
|
|
DEFVAL { false }
|
|
::= { futOspfv3IfEntry 3 }
|
|
|
|
futOspfv3IfNbrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Neighbour's through
|
|
that Interface."
|
|
::= { futOspfv3IfEntry 4 }
|
|
|
|
futOspfv3IfAdjCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Adjacencies through
|
|
that Interface."
|
|
::= { futOspfv3IfEntry 5 }
|
|
|
|
futOspfv3IfHelloRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Hello packets received
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 6 }
|
|
|
|
futOspfv3IfHelloTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Hello packets
|
|
transmitted through that Interface."
|
|
::= { futOspfv3IfEntry 7 }
|
|
|
|
futOspfv3IfHelloDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Hello packets
|
|
discarded through that Interface."
|
|
::= { futOspfv3IfEntry 8 }
|
|
|
|
futOspfv3IfDdpRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Ddp packets received
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 9 }
|
|
|
|
futOspfv3IfDdpTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Ddp packets
|
|
transmitted through that Interface."
|
|
::= { futOspfv3IfEntry 10 }
|
|
|
|
futOspfv3IfDdpDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Ddp packets discarded
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 11 }
|
|
|
|
futOspfv3IfLrqRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lrq packets received
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 12 }
|
|
|
|
futOspfv3IfLrqTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lrq packets
|
|
transmitted through that Interface."
|
|
::= { futOspfv3IfEntry 13 }
|
|
|
|
futOspfv3IfLrqDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lrq packets discarded
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 14 }
|
|
|
|
futOspfv3IfLsuRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lsu packets received
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 15 }
|
|
|
|
futOspfv3IfLsuTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lsu packets
|
|
transmitted through that Interface."
|
|
::= { futOspfv3IfEntry 16 }
|
|
|
|
futOspfv3IfLsuDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lsu packets discarded
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 17 }
|
|
|
|
futOspfv3IfLakRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lak packets received
|
|
through that Interface."
|
|
::= { futOspfv3IfEntry 18 }
|
|
|
|
futOspfv3IfLakTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lak packets
|
|
transmitted through that Interface."
|
|
::= { futOspfv3IfEntry 19 }
|
|
|
|
futOspfv3IfLakDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lak packets discarded
|
|
on that Interface."
|
|
::= { futOspfv3IfEntry 20 }
|
|
|
|
futOspfv3IfLinkLSASuppression OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not link LSA origination is
|
|
suppressed for networks other than broadcast or NBMA.
|
|
The object is set to value true (1) to suppress
|
|
the origination."
|
|
REFERENCE
|
|
"OSPF for IPv6, Appendix C.3, Router Interface
|
|
Parameters"
|
|
DEFVAL { false }
|
|
::= { futOspfv3IfEntry 21 }
|
|
|
|
futOspfv3IfBfdState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object enables/disables BFD in a specific OSPFv3 interface.
|
|
This object is set to enabled internally for particular interface entry,
|
|
when futOspfv3BfdAllIfState is enabled.
|
|
|
|
If futOspfv3BfdAllIfState is disabled and this object
|
|
is enabled, OSPFv3 registers with BFD for monitoring the neighbor
|
|
IP path, for the neighbors associated with this OSPFv3 interface alone.
|
|
|
|
When disabled, OSPV3 de-registers from BFD and does not allow
|
|
registration with BFD for the neighbors associated with this interface."
|
|
|
|
DEFVAL { disabled }
|
|
::= { futOspfv3IfEntry 22 }
|
|
|
|
futOspfv3IfCryptoAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sha1(1),
|
|
sha256(3),
|
|
sha384(4),
|
|
sha512(5),
|
|
none(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the SHA crypto authentication type to be used on the interface"
|
|
|
|
DEFVAL { none }
|
|
::= { futOspfv3IfEntry 23 }
|
|
|
|
futOspfv3IfCryptoAuthMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full(1),
|
|
transition(2),
|
|
none(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the crypto authentication mode to be used on the interface"
|
|
|
|
DEFVAL { none }
|
|
::= { futOspfv3IfEntry 24 }
|
|
|
|
futOspfv3IfAuthTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the total number of Authentication Trailer packets
|
|
transmitted on the interface."
|
|
::= { futOspfv3IfEntry 25 }
|
|
|
|
futOspfv3IfAuthRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the total number of Authentication Trailer packets
|
|
received on the interface."
|
|
::= { futOspfv3IfEntry 26 }
|
|
|
|
futOspfv3IfAuthDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Total number of Authentication Trailer packets
|
|
discarded on the interface."
|
|
::= { futOspfv3IfEntry 27 }
|
|
|
|
-- Routing Table
|
|
|
|
futOspfv3RoutingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3RoutingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of routing information."
|
|
::= { futospfv3 3 }
|
|
|
|
futOspfv3RoutingEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3RoutingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single route."
|
|
INDEX { futOspfv3RouteDestType,futOspfv3RouteDest,
|
|
futOspfv3RoutePfxLength,futOspfv3RouteNextHopType,
|
|
futOspfv3RouteNextHop }
|
|
::= { futOspfv3RoutingTable 1 }
|
|
|
|
FutOspfv3RoutingEntry ::= SEQUENCE {
|
|
futOspfv3RouteDestType InetAddressType,
|
|
futOspfv3RouteDest InetAddress,
|
|
futOspfv3RoutePfxLength InetAddressPrefixLength,
|
|
futOspfv3RouteNextHopType InetAddressType,
|
|
futOspfv3RouteNextHop InetAddress,
|
|
futOspfv3RouteType INTEGER,
|
|
futOspfv3RouteAreaId AreaID,
|
|
futOspfv3RouteCost BigMetric,
|
|
futOspfv3RouteType2Cost BigMetric,
|
|
futOspfv3RouteInterfaceIndex Integer32
|
|
}
|
|
|
|
futOspfv3RouteDestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of futOspfv3RouteDestType. Only
|
|
IPv6 addresses are expected."
|
|
::= { futOspfv3RoutingEntry 1 }
|
|
|
|
futOspfv3RouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Desitnation IPv6 Address of this route."
|
|
::= { futOspfv3RoutingEntry 2 }
|
|
|
|
futOspfv3RoutePfxLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Indicates the prefix length of the destination Address."
|
|
::= { futOspfv3RoutingEntry 3 }
|
|
|
|
futOspfv3RouteNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type offutOspfv3RouteNextHopType. Only
|
|
IPv6 addresses are expected."
|
|
::= { futOspfv3RoutingEntry 4 }
|
|
|
|
futOspfv3RouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Next Hop IPv6 Address for this route. For direct routes it has the
|
|
value ::0."
|
|
::= { futOspfv3RoutingEntry 5 }
|
|
|
|
futOspfv3RouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
intraArea (1),
|
|
interArea (2),
|
|
type1External (3),
|
|
type2External (4),
|
|
type1ExternalNssa (5),
|
|
type1ExternalNssa (6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the route"
|
|
::= { futOspfv3RoutingEntry 6 }
|
|
|
|
futOspfv3RouteAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Area ID associated with the route "
|
|
::= { futOspfv3RoutingEntry 7 }
|
|
|
|
futOspfv3RouteCost OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" It is a Type 1 external metrics which is
|
|
expressed in the same units as OSPF interface
|
|
cost ie. in terms of the OSPF link state metric.
|
|
If Type1 and Type2 cost are present, Type1 external
|
|
metrics always take precedence."
|
|
::= { futOspfv3RoutingEntry 8 }
|
|
|
|
futOspfv3RouteType2Cost OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type 2 external metrics are configured with
|
|
the cost greater than any path internal to the AS.
|
|
Use of Type 2 external metrics assumes that routing
|
|
between AS is the major cost of routing a packet, and
|
|
eliminates the need for conversion of external costs to
|
|
internal link state metrics."
|
|
::= { futOspfv3RoutingEntry 9 }
|
|
|
|
futOspfv3RouteInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Interface Index associated with the route"
|
|
::= { futOspfv3RoutingEntry 10 }
|
|
|
|
-- AsExternalAggregation Table
|
|
futOspfv3AsExternalAggregationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3AsExternalAggregationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether for the specified address range
|
|
Type-7/Type-5 LSA will be aggregated or not generated. "
|
|
::= { futospfv3 4 }
|
|
|
|
futOspfv3AsExternalAggregationEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3AsExternalAggregationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supports configuration of Type-5,Type-7 Address Range specifying
|
|
whether for the configured range, Type-5,Type-7 LSA will be
|
|
generated or not, and if generated whether aggregation is performed. "
|
|
INDEX { futOspfv3AsExternalAggregationNetType, futOspfv3AsExternalAggregationNet,
|
|
futOspfv3AsExternalAggregationPfxLength,
|
|
futOspfv3AsExternalAggregationAreaId }
|
|
::= {futOspfv3AsExternalAggregationTable 1 }
|
|
|
|
FutOspfv3AsExternalAggregationEntry ::=
|
|
SEQUENCE {
|
|
futOspfv3AsExternalAggregationNetType
|
|
InetAddressType,
|
|
futOspfv3AsExternalAggregationNet
|
|
InetAddress,
|
|
futOspfv3AsExternalAggregationPfxLength
|
|
InetAddressPrefixLength,
|
|
futOspfv3AsExternalAggregationAreaId
|
|
AreaID,
|
|
futOspfv3AsExternalAggregationEffect
|
|
INTEGER,
|
|
futOspfv3AsExternalAggregationTranslation
|
|
INTEGER,
|
|
futOspfv3AsExternalAggregationStatus
|
|
RowStatus
|
|
}
|
|
|
|
futOspfv3AsExternalAggregationNetType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of futOspfv3AsExternalAggregationNetType. Only
|
|
IPv6 addresses are expected."
|
|
::= { futOspfv3AsExternalAggregationEntry 1 }
|
|
|
|
futOspfv3AsExternalAggregationNet OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the Net indicated by
|
|
the range. "
|
|
::= { futOspfv3AsExternalAggregationEntry 2 }
|
|
|
|
futOspfv3AsExternalAggregationPfxLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length that pertains to the
|
|
range. "
|
|
::= { futOspfv3AsExternalAggregationEntry 3 }
|
|
|
|
futOspfv3AsExternalAggregationAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refer to description in futOspfv3AsExternalAggregationEffect."
|
|
::= { futOspfv3AsExternalAggregationEntry 4 }
|
|
|
|
|
|
futOspfv3AsExternalAggregationEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertise (1),
|
|
doNotAdvertise (2),
|
|
allowAll (3),
|
|
denyAll (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Type-5/Type-7 will be aggregated or not
|
|
generated for the specified range.
|
|
When set to 'allowAll' (3) and associated areaId is 0.0.0.0
|
|
aggregated Type-5 are generated for the specified range. In
|
|
addition aggregated Type-7 are generated in all attached NSSA
|
|
areas, for the specified range.Value allowAll (3) is not valid
|
|
for areaId other than 0.0.0.0.
|
|
When set to 'denyAll' (4) neither Type-5 nor Type-7 will be
|
|
generated for the specified range. Value denyAll (4) is not
|
|
valid for areaID other than 0.0.0.0.
|
|
When set to 'advertise' (1) and associated areaId is 0.0.0.0,
|
|
aggregated Type-5 LSA is generated and all the NSSA LSAs falling
|
|
in this address range are flushed out and no aggregated LSA of this
|
|
address range is generated for NSSA Areas.Otherwise, if associated
|
|
area-id is x.x.x.x (other than 0.0.0.0) aggregated Type-7 LSA is
|
|
generated in NSSA area x.x.x.x.
|
|
When set to 'doNotAdvertise' (2) and associated area-id is 0.0.0.0,
|
|
Type-5 LSA is not generated for the specified range, while all
|
|
the NSSA LSA falling in this range is flushed out and aggregated
|
|
Type-7 NSSA LSA of this address range is generated in all attached
|
|
NSSA areas.Otherwise, if associated area-id is x.x.x.x(other than 0.0.0.0),
|
|
Type-7 are not generated in NSSA area x.x.x.x for the specified range. "
|
|
DEFVAL { advertise }
|
|
::= { futOspfv3AsExternalAggregationEntry 5 }
|
|
|
|
futOspfv3AsExternalAggregationTranslation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This when set to enabled, P Bit is set in
|
|
the generated Type-7 LSA. When set disabled
|
|
P Bit is clear in the generated Type-7 LSA
|
|
for the range. "
|
|
DEFVAL { enabled }
|
|
::= { futOspfv3AsExternalAggregationEntry 6 }
|
|
|
|
futOspfv3AsExternalAggregationStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative."
|
|
::= { futOspfv3AsExternalAggregationEntry 7 }
|
|
|
|
|
|
-- ABR/ASBR Routes Table
|
|
futOspfv3BRRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3BRRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of routing information."
|
|
::= { futospfv3 5 }
|
|
|
|
futOspfv3BRRouteEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3BRRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single route."
|
|
INDEX {futOspfv3BRRouteDest, futOspfv3BRRouteNextHopType,
|
|
futOspfv3BRRouteNextHop,futOspfv3BRRouteDestType}
|
|
::= { futOspfv3BRRouteTable 1 }
|
|
|
|
FutOspfv3BRRouteEntry ::= SEQUENCE {
|
|
futOspfv3BRRouteDest IpAddress,
|
|
futOspfv3BRRouteNextHopType InetAddressType,
|
|
futOspfv3BRRouteNextHop InetAddress,
|
|
futOspfv3BRRouteDestType INTEGER,
|
|
futOspfv3BRRouteType INTEGER,
|
|
futOspfv3BRRouteAreaId AreaID,
|
|
futOspfv3BRRouteCost BigMetric,
|
|
futOspfv3BRRouteInterfaceIndex InterfaceIndex
|
|
}
|
|
|
|
futOspfv3BRRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Router Id of the destination router.
|
|
ABR/ASBR entries will have Router Id as
|
|
the destination network Id "
|
|
::= { futOspfv3BRRouteEntry 1 }
|
|
|
|
futOspfv3BRRouteNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of futOspfv3BRRouteNextHopType. Only
|
|
IPv6 addresses are expected."
|
|
::= { futOspfv3BRRouteEntry 2 }
|
|
|
|
futOspfv3BRRouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Next Hop IPv6 Address for this route. For direct
|
|
routes it has the value ::0."
|
|
::= { futOspfv3BRRouteEntry 3 }
|
|
|
|
futOspfv3BRRouteDestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
areaBorder (2),
|
|
asBoundary (3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of the route. The route can be ABR route
|
|
entry or ASBR route entry "
|
|
::= { futOspfv3BRRouteEntry 4 }
|
|
|
|
futOspfv3BRRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
intraArea (1),
|
|
interArea (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of the route "
|
|
::= { futOspfv3BRRouteEntry 5 }
|
|
|
|
futOspfv3BRRouteAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Area ID associated with the route "
|
|
::= { futOspfv3BRRouteEntry 6 }
|
|
|
|
futOspfv3BRRouteCost OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The cost associated with the route "
|
|
::= { futOspfv3BRRouteEntry 7 }
|
|
|
|
futOspfv3BRRouteInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Interface Index associated with the route "
|
|
::= { futOspfv3BRRouteEntry 8 }
|
|
|
|
-- Redistribution configuration table. Attributes configured for this
|
|
-- table will be applied during redistribution.
|
|
|
|
futOspfv3RedistRouteCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3RedistRouteCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the configuration of Metric Cost and Route
|
|
Type information to be applied to the routes learnt from the RTM."
|
|
::= { futospfv3 6 }
|
|
|
|
futOspfv3RedistRouteCfgEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3RedistRouteCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configuration of single route entry."
|
|
INDEX {futOspfv3RedistRouteDestType, futOspfv3RedistRouteDest,
|
|
futOspfv3RedistRoutePfxLength}
|
|
::= { futOspfv3RedistRouteCfgTable 1 }
|
|
|
|
FutOspfv3RedistRouteCfgEntry ::= SEQUENCE {
|
|
futOspfv3RedistRouteDestType InetAddressType,
|
|
futOspfv3RedistRouteDest InetAddress,
|
|
futOspfv3RedistRoutePfxLength InetAddressPrefixLength,
|
|
futOspfv3RedistRouteMetric BigMetric,
|
|
futOspfv3RedistRouteMetricType INTEGER,
|
|
futOspfv3RedistRouteTagType INTEGER,
|
|
futOspfv3RedistRouteTag Integer32,
|
|
futOspfv3RedistRouteStatus RowStatus
|
|
}
|
|
|
|
futOspfv3RedistRouteDestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of futOspfv3RedistRouteDestType. Only
|
|
IPv6 addresses are expected."
|
|
::= { futOspfv3RedistRouteCfgEntry 1 }
|
|
|
|
futOspfv3RedistRouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 Address of the Destination route."
|
|
::= { futOspfv3RedistRouteCfgEntry 2 }
|
|
|
|
futOspfv3RedistRoutePfxLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Prefix Length of the Destination route."
|
|
::= { futOspfv3RedistRouteCfgEntry 3 }
|
|
|
|
futOspfv3RedistRouteMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric value applied to the route before it is adv. into the
|
|
OSPFv3 Domain."
|
|
DEFVAL { 10 }
|
|
::= { futOspfv3RedistRouteCfgEntry 4 }
|
|
|
|
futOspfv3RedistRouteMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1External (3),
|
|
type2External (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric Type applied to the route before it is adv. into the
|
|
OSPFv3 Domain"
|
|
DEFVAL { type2External }
|
|
::= { futOspfv3RedistRouteCfgEntry 5 }
|
|
|
|
futOspfv3RedistRouteTagType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual (1),
|
|
automatic (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Tag Type MIB object describes whether Tags will be
|
|
automatically generated or will be manually configured.
|
|
If tags are manually configured , the futOspfv3RedistRouteTag
|
|
MIB has to be set with the Tag value needed."
|
|
DEFVAL { manual }
|
|
::= { futOspfv3RedistRouteCfgEntry 6 }
|
|
|
|
futOspfv3RedistRouteTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Route Tag in case the user configures a Manual option for
|
|
the tags."
|
|
DEFVAL { 0 }
|
|
::= { futOspfv3RedistRouteCfgEntry 7 }
|
|
|
|
futOspfv3RedistRouteStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable dispalys the status of the entry.Setting it to
|
|
'invalid' has the effect of rendering it inoperative."
|
|
::= { futOspfv3RedistRouteCfgEntry 8 }
|
|
|
|
|
|
-- RRD OBJECT DEFINITION BEGIN
|
|
|
|
futospfv3RRDGroup OBJECT IDENTIFIER ::= { futospfv3 7 }
|
|
|
|
futOspfv3RRDGeneralGroup OBJECT IDENTIFIER ::= { futospfv3RRDGroup 1}
|
|
|
|
-- SCALAR_TABLE_BEGIN futOspfv3RRDGeneralGroup 3
|
|
|
|
futOspfv3RRDStatus OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object enables/disables OSPFv3 to participate in Route
|
|
Redistribution. If set to enabled, OSPFv3 will start advertising
|
|
the routes learned by other protocols. If set to disabled, OSPFv3
|
|
will stop redisbution of routes. However, OSPFv3 will continue
|
|
updating the Common Routing Table using the queue interface."
|
|
DEFVAL { disabled }
|
|
::= { futOspfv3RRDGeneralGroup 1 }
|
|
|
|
futOspfv3RRDSrcProtoMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bit mask of source protocols from which routes are
|
|
imported to OSPFv3.
|
|
|
|
Bit 1, if set, indicates that local routes are
|
|
redistributed into OSPFv3. (value = 2)
|
|
if reset, indicates that local routes are not
|
|
redistributed into OSPFv3.
|
|
|
|
Bit 2, if set, indicates that static routes are
|
|
redistributed into OSPFv3. (value = 4)
|
|
if reset, indicates that static routes are not
|
|
redistributed into OSPFv3.
|
|
|
|
Bit 4, if set, indicates that routes from RIP are
|
|
redistributed into OSPFv3. (value = 16)
|
|
if reset, indicates that routes from RIP are not
|
|
redistributed into OSPFv3.
|
|
|
|
Bit 9, if set, indicates that routes from ISIS Level-1 are
|
|
redistributed into OSPFv3. (value = 512)
|
|
if reset, indicates that routes from ISIS are not
|
|
redistributed into OSPFv3.
|
|
|
|
|
|
Bit 10, if set, indicates that routes from ISIS Level-2 are
|
|
redistributed into OSPFv3. (value = 1024)
|
|
if reset, indicates that routes from ISIS are not
|
|
redistributed into OSPFv3.
|
|
|
|
Other bits are reserved for future use."
|
|
DEFVAL { 0 }
|
|
::= { futOspfv3RRDGeneralGroup 2 }
|
|
|
|
futOspfv3RRDRouteMapName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name Identifies the specified route-map
|
|
in the list of route-maps."
|
|
::= { futOspfv3RRDGeneralGroup 3 }
|
|
|
|
|
|
-- SCALAR_TABLE_END futOspfv3RRDGeneralGroup
|
|
|
|
-- FILTERING OBJECT DEFINITION BEGIN
|
|
|
|
futospfv3DistInOutRouteMap OBJECT IDENTIFIER ::= { futospfv3 8 }
|
|
|
|
futOspfv3DistInOutRouteMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3DistInOutRouteMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the configuration of filtering for route map."
|
|
::= { futospfv3DistInOutRouteMap 1 }
|
|
|
|
futOspfv3DistInOutRouteMapEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3DistInOutRouteMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the filtering configuration of single entry."
|
|
INDEX {futOspfv3DistInOutRouteMapName, futOspfv3DistInOutRouteMapType}
|
|
::= { futOspfv3DistInOutRouteMapTable 1 }
|
|
|
|
FutOspfv3DistInOutRouteMapEntry ::= SEQUENCE {
|
|
futOspfv3DistInOutRouteMapName DisplayString,
|
|
futOspfv3DistInOutRouteMapType Integer32,
|
|
futOspfv3DistInOutRouteMapValue Integer32,
|
|
futOspfv3DistInOutRouteMapRowStatus RowStatus
|
|
}
|
|
|
|
futOspfv3DistInOutRouteMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Route map name."
|
|
::= { futOspfv3DistInOutRouteMapEntry 1 }
|
|
|
|
futOspfv3DistInOutRouteMapType OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of route map to indicate the route map is for
|
|
distribute in or for distribute out or for distance.
|
|
1 - distance
|
|
2 - distribute in
|
|
3 - distribute out"
|
|
::= { futOspfv3DistInOutRouteMapEntry 2 }
|
|
|
|
futOspfv3DistInOutRouteMapValue OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Distance value ( this will be unused for distribute list )"
|
|
::= { futOspfv3DistInOutRouteMapEntry 3 }
|
|
|
|
futOspfv3DistInOutRouteMapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { futOspfv3DistInOutRouteMapEntry 4 }
|
|
|
|
-- FILTERING OBJECT DEFINITION END
|
|
|
|
-- PREFERENCE OBJECT DEFINITION BEGIN
|
|
|
|
futospf3PreferenceGroup OBJECT IDENTIFIER ::= { futospfv3 9 }
|
|
|
|
|
|
futOspf3PreferenceValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preference value for OSPFv3 routes. Use '0' to set default value"
|
|
DEFVAL { 0 }
|
|
::= { futospf3PreferenceGroup 1 }
|
|
|
|
-- PREFERENCE OBJECT DEFINITION END
|
|
|
|
|
|
-- OSPFV3 BFD NEIGHBOR OBJECT DEFINITION BEGIN
|
|
|
|
futOspfv3NeighborBfdGroup OBJECT IDENTIFIER ::= { futospfv3 11 }
|
|
|
|
futOspfv3NeighborBfdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3NeighborBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This table contains the neighbor Entry for Bfd "
|
|
::= { futOspfv3NeighborBfdGroup 1 }
|
|
|
|
futOspfv3NeighborBfdEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3NeighborBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This entry contains information describing Bfd neighbor state "
|
|
AUGMENTS { ospfv3NbrEntry }
|
|
::= { futOspfv3NeighborBfdTable 1 }
|
|
|
|
FutOspfv3NeighborBfdEntry ::= SEQUENCE {
|
|
futOspfv3NbrBfdState INTEGER
|
|
}
|
|
|
|
futOspfv3NbrBfdState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the Neighbor Bfd state.It is a read-only object.
|
|
It is enabled internally only when BFD is
|
|
enabled for monitoring the neighbor IP path."
|
|
::= { futOspfv3NeighborBfdEntry 1 }
|
|
|
|
-- OSPFV3 BFD NEIGHBOR OBJECT DEFINITION END
|
|
|
|
-- Future OSPF-V3 Interface Authentication Table
|
|
|
|
futOspfv3IfAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3IfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OSPF-V3 Interface Authentication Table describes the parameters
|
|
required for cryptographic Authentication."
|
|
::= { futospfv3 12 }
|
|
|
|
futOspfv3IfAuthEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3IfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes one Authentication Key from the viewpoint of OSPF-V3."
|
|
|
|
INDEX { futOspfv3IfAuthIfIndex, futOspfv3IfAuthKeyId}
|
|
::= { futOspfv3IfAuthTable 1 }
|
|
|
|
FutOspfv3IfAuthEntry ::= SEQUENCE {
|
|
futOspfv3IfAuthIfIndex InterfaceIndex,
|
|
futOspfv3IfAuthKeyId Integer32,
|
|
futOspfv3IfAuthKey OCTET STRING,
|
|
futOspfv3IfAuthKeyStartAccept DateAndTime,
|
|
futOspfv3IfAuthKeyStartGenerate DateAndTime,
|
|
futOspfv3IfAuthKeyStopGenerate DateAndTime,
|
|
futOspfv3IfAuthKeyStopAccept DateAndTime,
|
|
futOspfv3IfAuthKeyStatus RowStatus
|
|
}
|
|
|
|
futOspfv3IfAuthIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interface index of OSPFv3 interface.
|
|
It corresponds to the interface index of the
|
|
IPv6 interface on which OSPFv3 is configured."
|
|
::= { futOspfv3IfAuthEntry 1 }
|
|
|
|
futOspfv3IfAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object identifies the secret key used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { futOspfv3IfAuthEntry 2 }
|
|
|
|
futOspfv3IfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16)) -- Already existing Max Key size is carried over for all the Algorithms.
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object identifies the secret key which is used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { futOspfv3IfAuthEntry 3 }
|
|
|
|
futOspfv3IfAuthKeyStartAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts Accepting packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3IfAuthEntry 4 }
|
|
|
|
futOspfv3IfAuthKeyStartGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts generating packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3IfAuthEntry 5 }
|
|
|
|
futOspfv3IfAuthKeyStopGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
generation. If the value is not set, then it will be taken
|
|
as infinite and displayed as 0 example,
|
|
Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3IfAuthEntry 6 }
|
|
|
|
futOspfv3IfAuthKeyStopAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
Verification. If the value is not set, then it will be taken
|
|
as infinite and displayed as 0 example,
|
|
Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3IfAuthEntry 7 }
|
|
|
|
futOspfv3IfAuthKeyStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the status of the key."
|
|
::= { futOspfv3IfAuthEntry 8 }
|
|
|
|
-- Future OSPF-V3 Virtual Interface Authentication Table
|
|
|
|
futOspfv3VirtIfAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3VirtIfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OSPF-V3 Interface Authentication Table describes the parameters
|
|
required for cryptographic Authentication."
|
|
::= { futospfv3 13 }
|
|
|
|
futOspfv3VirtIfAuthEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3VirtIfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes entry of one
|
|
Authentication Key from the viewpoint of OSPF-V3."
|
|
INDEX {futOspfv3VirtIfAuthAreaId,futOspfv3VirtIfAuthNeighbor,
|
|
futOspfv3VirtIfAuthKeyId}
|
|
::= { futOspfv3VirtIfAuthTable 1 }
|
|
|
|
FutOspfv3VirtIfAuthEntry ::= SEQUENCE {
|
|
futOspfv3VirtIfAuthAreaId AreaID,
|
|
futOspfv3VirtIfAuthNeighbor RouterID,
|
|
futOspfv3VirtIfAuthKeyId Integer32,
|
|
futOspfv3VirtIfAuthKey OCTET STRING,
|
|
futOspfv3VirtIfAuthKeyStartAccept DateAndTime,
|
|
futOspfv3VirtIfAuthKeyStartGenerate DateAndTime,
|
|
futOspfv3VirtIfAuthKeyStopGenerate DateAndTime,
|
|
futOspfv3VirtIfAuthKeyStopAccept DateAndTime,
|
|
futOspfv3VirtIfAuthKeyStatus RowStatus
|
|
}
|
|
|
|
futOspfv3VirtIfAuthAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the transit area that the virtual link
|
|
traverses. By definition, this should not be 0.0.0.0."
|
|
::= { futOspfv3VirtIfAuthEntry 1 }
|
|
|
|
futOspfv3VirtIfAuthNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the Router ID of the Virtual Neighbor."
|
|
::= { futOspfv3VirtIfAuthEntry 2 }
|
|
|
|
futOspfv3VirtIfAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object identifies the secret key used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { futOspfv3VirtIfAuthEntry 3 }
|
|
|
|
futOspfv3VirtIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16)) -- Already existing Max Key size is carried over for all the Algorithms.
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the secret key which is used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { futOspfv3VirtIfAuthEntry 4 }
|
|
|
|
futOspfv3VirtIfAuthKeyStartAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts generating packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3VirtIfAuthEntry 5 }
|
|
|
|
futOspfv3VirtIfAuthKeyStartGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts generating packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3VirtIfAuthEntry 6 }
|
|
|
|
futOspfv3VirtIfAuthKeyStopGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
generation. If the value is not set, then it will be taken
|
|
as infinite and displayed as 0 example,
|
|
Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3VirtIfAuthEntry 7 }
|
|
|
|
futOspfv3VirtIfAuthKeyStopAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
Verification. If the value is not set, then it will be taken
|
|
as infinite and displayed as 2136-02-06,06:28:15,
|
|
DateTime equivalent to max value of UINT4.
|
|
For example, Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { futOspfv3VirtIfAuthEntry 8 }
|
|
|
|
futOspfv3VirtIfAuthKeyStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the status of the key."
|
|
::= {futOspfv3VirtIfAuthEntry 9 }
|
|
|
|
-- CRYPTO AUTH VIRTUAL INTERFACE START
|
|
futOspfv3VirtIfCryptoAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FutOspfv3VirtIfCryptoAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table holds the crypto authentication type."
|
|
::= { futospfv3 14 }
|
|
futOspfv3VirtIfCryptoAuthEntry OBJECT-TYPE
|
|
SYNTAX FutOspfv3VirtIfCryptoAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the entry of the cryptographic authentication."
|
|
AUGMENTS { ospfv3VirtIfEntry }
|
|
::= { futOspfv3VirtIfCryptoAuthTable 1 }
|
|
FutOspfv3VirtIfCryptoAuthEntry ::=
|
|
SEQUENCE {
|
|
futOspfv3VirtIfCryptoAuthType
|
|
INTEGER,
|
|
futOspfv3VirtIfCryptoAuthMode
|
|
INTEGER
|
|
|
|
}
|
|
futOspfv3VirtIfCryptoAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sha1(1),
|
|
sha256(3),
|
|
sha384(4),
|
|
sha512(5),
|
|
none(6)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the SHA crypto authentication type to be
|
|
used on the interface"
|
|
|
|
DEFVAL { none }
|
|
::= { futOspfv3VirtIfCryptoAuthEntry 1 }
|
|
|
|
futOspfv3VirtIfCryptoAuthMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full(1),
|
|
transition(2),
|
|
none(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the crypto authentication mode to be used on the interface
|
|
for setting transition"
|
|
|
|
DEFVAL { none }
|
|
::= { futOspfv3VirtIfCryptoAuthEntry 2 }
|
|
|
|
-- CRYPTO AUTH VIRTUAL INTERFACE END
|
|
|
|
-- Trap Notification types for Graceful restart
|
|
|
|
futOspfv3Traps OBJECT IDENTIFIER ::= { futOspfv3Notification 0 }
|
|
futOspfv3TrapObject OBJECT IDENTIFIER ::= { futOspfv3Notification 1 }
|
|
|
|
-- Trap objects for index variable to be used in notifications
|
|
|
|
futOspfv3TrapNbrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local link ID of the link over which the
|
|
neighbor can be reached. This is used for Trap"
|
|
::= { futOspfv3TrapObject 1 }
|
|
|
|
futOspfv3TrapVirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
neighboring router in the Autonomous System.
|
|
This is used for Trap"
|
|
::= { futOspfv3TrapObject 2 }
|
|
|
|
futOspfv3TrapNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System.
|
|
This is used for Trap"
|
|
::= { futOspfv3TrapObject 3 }
|
|
|
|
futOspfv3TrapVirtNbrArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area Identifier. This is used for Trap"
|
|
::= { futOspfv3TrapObject 4 }
|
|
|
|
futOspfv3TrapBulkUpdAbortReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
memAllocFailed(2),
|
|
sendFailed(3),
|
|
processFailed(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the failure of particular Bulk Update Abort."
|
|
::= { futOspfv3TrapObject 5 }
|
|
|
|
|
|
-- END
|
|
|
|
futOspfv3RestartStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfv3RouterId, -- The originator of the trap
|
|
ospfv3RestartStatus,
|
|
ospfv3RestartInterval,
|
|
ospfv3RestartExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfv3RestartStatusChange trap signifies that
|
|
there has been a change in the graceful restart
|
|
state for the router. This trap should be
|
|
generated when the router restart status
|
|
changes."
|
|
::= { futOspfv3Traps 1 }
|
|
|
|
futOspfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfv3RouterId, -- The originator of the trap
|
|
futOspfv3TrapNbrIfIndex,
|
|
futOspfv3TrapNbrRtrId,
|
|
ospfv3NbrRestartHelperStatus,
|
|
ospfv3NbrRestartHelperAge,
|
|
ospfv3NbrRestartHelperExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An futOspfv3NbrRestartHelperStatusChange trap signifies that
|
|
there has been a change in the graceful restart
|
|
helper state for the neighbor. This trap should be
|
|
generated when the neighbor restart helper status
|
|
transitions for a neighbor."
|
|
::= { futOspfv3Traps 2 }
|
|
|
|
futOspfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfv3RouterId, -- The originator of the trap
|
|
futOspfv3TrapVirtNbrArea,
|
|
futOspfv3TrapVirtNbrRtrId,
|
|
ospfv3VirtNbrRestartHelperStatus,
|
|
ospfv3VirtNbrRestartHelperAge,
|
|
ospfv3VirtNbrRestartHelperExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An futOspfv3VirtNbrRestartHelperStatusChange trap signifies
|
|
that there has been a change in the graceful restart
|
|
helper state for the virtual neighbor. This trap should
|
|
be generated when the virtual neighbor restart helper
|
|
status transitions for a virtual neighbor."
|
|
::= { futOspfv3Traps 3 }
|
|
|
|
-- Trap Notification for HA
|
|
|
|
futOspfv3HotStandbyStateChgTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfv3RouterId, -- The originator of the trap
|
|
futOspfv3HotStandbyState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent to the management entity whenever
|
|
there is a state change in the OSPFv3 hotstandby Module."
|
|
::= {futOspfv3Traps 4}
|
|
|
|
futOspfv3HotStandbyBulkUpdAbortTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfv3RouterId, -- The originator of the trap
|
|
futOspfv3DynamicBulkUpdStatus,
|
|
futOspfv3TrapBulkUpdAbortReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent to the management entity whenever
|
|
the bulk update is aborted"
|
|
::= {futOspfv3Traps 5}
|
|
|
|
futOspfv3AuthSequenceNumWrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfv3RouterId -- The originator of the trap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a notification that is sent to the management entity whenever
|
|
the Authentication Trailer sequence number is wrapped"
|
|
::= {futOspfv3Traps 6}
|
|
|
|
-- End of Trap notifications
|
|
|
|
END
|