2441 lines
79 KiB
Plaintext
2441 lines
79 KiB
Plaintext
-- Copyright (C) 2007-2012 Aricent Group . All Rights Reserved
|
|
|
|
-- $Id: fsmistdospf.mib,v 1.5 2017/03/10 12:45:34 siva Exp $
|
|
|
|
ARICENT-MISTDOSPF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
|
|
Integer32, IpAddress, enterprises
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus
|
|
FROM SNMPv2-TC;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [9].
|
|
|
|
fsMIStdOspf MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION
|
|
"The Proprietary OSPFMI MIB modified from STDOSPF MIB"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
"The Proprietary OSPFMI MIB modified from STDOSPF MIB"
|
|
|
|
::= { enterprises futuresoftware (2076) 146 }
|
|
|
|
-- The Area ID, in OSPF, has the same format as an IP Address,
|
|
-- but has the function of defining a summarization point for
|
|
-- Link State Advertisements
|
|
|
|
AreaID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An OSPF Area Identifier."
|
|
SYNTAX IpAddress
|
|
|
|
|
|
-- The Router ID, in OSPF, has the same format as an IP Address,
|
|
-- but identifies the router independent of its IP Address.
|
|
|
|
RouterID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A OSPF Router Identifier."
|
|
SYNTAX IpAddress
|
|
|
|
|
|
-- The OSPF Metric is defined as an unsigned value in the range
|
|
|
|
Metric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Internal Metric."
|
|
SYNTAX Integer32 (0..'FFFF'h)
|
|
|
|
BigMetric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF External Metric."
|
|
SYNTAX Integer32 (0..'FFFFFF'h)
|
|
|
|
-- Status Values
|
|
|
|
Status ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of an interface: 'enabled' indicates that
|
|
it is willing to communicate with other OSPF Routers,
|
|
while 'disabled' indicates that it is not."
|
|
SYNTAX INTEGER { enabled (1), disabled (2) }
|
|
|
|
-- Time Durations measured in seconds
|
|
|
|
PositiveInteger ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A positive integer. Values in excess are precluded as
|
|
unnecessary and prone to interoperability issues."
|
|
SYNTAX Integer32 (0..'7FFFFFFF'h)
|
|
|
|
HelloRange ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range of intervals on which hello messages are
|
|
exchanged."
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
|
|
UpToMaxAge ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values that one might find or configure for
|
|
variables bounded by the maximum age of an LSA."
|
|
SYNTAX Integer32 (1..3600)
|
|
|
|
-- Potential Priorities for the Designated Router Election
|
|
|
|
DesignatedRouterPriority ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values defined for the priority of a system for
|
|
becoming the designated router."
|
|
SYNTAX Integer32 (0..'FF'h)
|
|
|
|
TOSType ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Service is defined as a mapping to the IP Type of
|
|
Service Flags as defined in the IP Forwarding Table MIB
|
|
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
| | | |
|
|
| PRECEDENCE | TYPE OF SERVICE | 0 |
|
|
| | | |
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
|
|
IP TOS IP TOS
|
|
Field Policy Field Policy
|
|
|
|
Contents Code Contents Code
|
|
0 0 0 0 ==> 0 0 0 0 1 ==> 2
|
|
0 0 1 0 ==> 4 0 0 1 1 ==> 6
|
|
0 1 0 0 ==> 8 0 1 0 1 ==> 10
|
|
0 1 1 0 ==> 12 0 1 1 1 ==> 14
|
|
1 0 0 0 ==> 16 1 0 0 1 ==> 18
|
|
1 0 1 0 ==> 20 1 0 1 1 ==> 22
|
|
1 1 0 0 ==> 24 1 1 0 1 ==> 26
|
|
1 1 1 0 ==> 28 1 1 1 1 ==> 30
|
|
|
|
The remaining values are left for future definition."
|
|
SYNTAX Integer32 (0..30)
|
|
|
|
|
|
|
|
fsMIStdOspfGeneralGroup OBJECT IDENTIFIER ::= { fsMIStdOspf 1 }
|
|
|
|
|
|
-- OSPF Table
|
|
-- contains information regarding various instances
|
|
-- of the router
|
|
|
|
fsMIStdOspfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the parameters
|
|
of router's instances"
|
|
::= { fsMIStdOspfGeneralGroup 1 }
|
|
|
|
fsMIStdOspfEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the parameters
|
|
of one of the router's instances"
|
|
INDEX { fsMIStdOspfContextId }
|
|
::= { fsMIStdOspfTable 1 }
|
|
|
|
FsMIStdOspfEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfContextId
|
|
Integer32,
|
|
fsMIStdOspfRouterId
|
|
RouterID,
|
|
fsMIStdOspfAdminStat
|
|
Status,
|
|
fsMIStdOspfVersionNumber
|
|
INTEGER,
|
|
fsMIStdOspfAreaBdrRtrStatus
|
|
TruthValue,
|
|
fsMIStdOspfASBdrRtrStatus
|
|
TruthValue,
|
|
fsMIStdOspfExternLsaCount
|
|
Gauge32,
|
|
fsMIStdOspfExternLsaCksumSum
|
|
Integer32,
|
|
fsMIStdOspfTOSSupport
|
|
TruthValue,
|
|
fsMIStdOspfOriginateNewLsas
|
|
Counter32,
|
|
fsMIStdOspfRxNewLsas
|
|
Counter32,
|
|
fsMIStdOspfExtLsdbLimit
|
|
Integer32,
|
|
fsMIStdOspfMulticastExtensions
|
|
Integer32,
|
|
fsMIStdOspfExitOverflowInterval
|
|
PositiveInteger,
|
|
fsMIStdOspfDemandExtensions
|
|
TruthValue,
|
|
fsMIStdOspfStatus
|
|
RowStatus
|
|
}
|
|
|
|
fsMIStdOspfContextId OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit unique context id for each entry"
|
|
::= { fsMIStdOspfEntry 1 }
|
|
|
|
|
|
fsMIStdOspfRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
router in the Autonomous System.
|
|
|
|
By convention, to ensure uniqueness, this
|
|
should default to the value of one of the
|
|
router's IP interface addresses."
|
|
REFERENCE
|
|
"OSPF Version 2, C.1 Global parameters"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { fsMIStdOspfEntry 2 }
|
|
|
|
|
|
fsMIStdOspfAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of OSPF in the
|
|
router. The value 'enabled' denotes that the
|
|
OSPF Process is active on at least one inter-
|
|
face; 'disabled' disables it on all inter-
|
|
faces."
|
|
::= { fsMIStdOspfEntry 3 }
|
|
|
|
fsMIStdOspfVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER { version2 (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current version number of the OSPF proto-
|
|
col is 2."
|
|
REFERENCE
|
|
"OSPF Version 2, Title"
|
|
::= { fsMIStdOspfEntry 4 }
|
|
|
|
|
|
fsMIStdOspfAreaBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is an area
|
|
border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3 Splitting the AS into
|
|
Areas"
|
|
::= { fsMIStdOspfEntry 5 }
|
|
|
|
|
|
fsMIStdOspfASBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is config-
|
|
ured as an Autonomous System border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3.3 Classification of
|
|
routers"
|
|
::= { fsMIStdOspfEntry 6 }
|
|
|
|
fsMIStdOspfExternLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of external (LS type 5) link-state
|
|
advertisements in the link-state database."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.5 AS external link
|
|
advertisements"
|
|
::= { fsMIStdOspfEntry 7 }
|
|
|
|
|
|
fsMIStdOspfExternLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the LS checksums of
|
|
the external link-state advertisements con-
|
|
tained in the link-state database. This sum
|
|
can be used to determine if there has been a
|
|
change in a router's link state database, and
|
|
to compare the link-state database of two
|
|
routers."
|
|
::= { fsMIStdOspfEntry 8 }
|
|
|
|
|
|
fsMIStdOspfTOSSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for type-of-service rout-
|
|
ing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix F.1.2 Optional TOS
|
|
support"
|
|
::= { fsMIStdOspfEntry 9 }
|
|
|
|
fsMIStdOspfOriginateNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of new link-state advertisements
|
|
that have been originated. This number is in-
|
|
cremented each time the router originates a new
|
|
LSA."
|
|
::= { fsMIStdOspfEntry 10 }
|
|
|
|
|
|
fsMIStdOspfRxNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of link-state advertisements re-
|
|
ceived determined to be new instantiations.
|
|
This number does not include newer instantia-
|
|
tions of self-originated link-state advertise-
|
|
ments."
|
|
::= { fsMIStdOspfEntry 11 }
|
|
|
|
fsMIStdOspfExtLsdbLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..'7FFFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of non-default AS-
|
|
external-LSAs entries that can be stored in the
|
|
link-state database. If the value is -1, then
|
|
there is no limit.
|
|
|
|
When the number of non-default AS-external-LSAs
|
|
in a router's link-state database reaches
|
|
fsMIStdOspfExtLsdbLimit, the router enters Overflow-
|
|
State. The router never holds more than
|
|
fsMIStdOspfExtLsdbLimit non-default AS-external-LSAs
|
|
in its database. fsMIStdOspfExtLsdbLimit MUST be set
|
|
identically in all routers attached to the OSPF
|
|
backbone and/or any regular OSPF area. (i.e.,
|
|
OSPF stub areas and NSSAs are excluded)."
|
|
DEFVAL { -1 }
|
|
::= { fsMIStdOspfEntry 12 }
|
|
|
|
|
|
fsMIStdOspfMulticastExtensions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask indicating whether the router is
|
|
forwarding IP multicast (Class D) datagrams
|
|
based on the algorithms defined in the Multi-
|
|
cast Extensions to OSPF.
|
|
|
|
Bit 0, if set, indicates that the router can
|
|
forward IP multicast datagrams in the router's
|
|
directly attached areas (called intra-area mul-
|
|
ticast routing).
|
|
|
|
Bit 1, if set, indicates that the router can
|
|
forward IP multicast datagrams between OSPF
|
|
areas (called inter-area multicast routing).
|
|
|
|
Bit 2, if set, indicates that the router can
|
|
forward IP multicast datagrams between Auto-
|
|
nomous Systems (called inter-AS multicast rout-
|
|
ing).
|
|
|
|
Only certain combinations of bit settings are
|
|
allowed, namely: 0 (no multicast forwarding is
|
|
enabled), 1 (intra-area multicasting only), 3
|
|
(intra-area and inter-area multicasting), 5
|
|
(intra-area and inter-AS multicasting) and 7
|
|
(multicasting everywhere). By default, no mul-
|
|
ticast forwarding is enabled."
|
|
DEFVAL { 0 }
|
|
::= { fsMIStdOspfEntry 13 }
|
|
|
|
fsMIStdOspfExitOverflowInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that, after entering
|
|
OverflowState, a router will attempt to leave
|
|
OverflowState. This allows the router to again
|
|
originate non-default AS-external-LSAs. When
|
|
set to 0, the router will not leave Overflow-
|
|
State until restarted."
|
|
DEFVAL { 0 }
|
|
::= { fsMIStdOspfEntry 14 }
|
|
|
|
|
|
fsMIStdOspfDemandExtensions OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for demand routing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix on Demand Routing"
|
|
::= { fsMIStdOspfEntry 15 }
|
|
|
|
fsMIStdOspfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfEntry 16 }
|
|
|
|
|
|
-- The OSPF Area Data Structure contains information
|
|
-- regarding the various areas. The interfaces and
|
|
-- virtual links are configured as part of these areas.
|
|
-- Area 0.0.0.0, by definition, is the Backbone Area
|
|
|
|
|
|
fsMIStdOspfAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parame-
|
|
ters and cumulative statistics of the router's
|
|
attached areas."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data Struc-
|
|
ture"
|
|
::= { fsMIStdOspf 2 }
|
|
|
|
|
|
fsMIStdOspfAreaEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parame-
|
|
ters and cumulative statistics of one of the
|
|
router's attached areas."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfAreaId }
|
|
::= { fsMIStdOspfAreaTable 1 }
|
|
|
|
FsMIStdOspfAreaEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfAreaId
|
|
AreaID,
|
|
fsMIStdOspfImportAsExtern
|
|
INTEGER,
|
|
fsMIStdOspfSpfRuns
|
|
Counter32,
|
|
fsMIStdOspfAreaBdrRtrCount
|
|
Gauge32,
|
|
fsMIStdOspfAsBdrRtrCount
|
|
Gauge32,
|
|
fsMIStdOspfAreaLsaCount
|
|
Gauge32,
|
|
fsMIStdOspfAreaLsaCksumSum
|
|
Integer32,
|
|
fsMIStdOspfAreaSummary
|
|
INTEGER,
|
|
fsMIStdOspfAreaStatus
|
|
RowStatus
|
|
}
|
|
|
|
fsMIStdOspfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an area.
|
|
Area ID 0.0.0.0 is used for the OSPF backbone."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspfAreaEntry 1 }
|
|
|
|
|
|
fsMIStdOspfImportAsExtern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
importExternal (1),
|
|
importNoExternal (2),
|
|
importNssa (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area's support for importing AS external
|
|
link- state advertisements."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
DEFVAL { importExternal }
|
|
::= { fsMIStdOspfAreaEntry 3 }
|
|
|
|
|
|
fsMIStdOspfSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the intra-area route
|
|
table has been calculated using this area's
|
|
link-state database. This is typically done
|
|
using Dijkstra's algorithm."
|
|
::= { fsMIStdOspfAreaEntry 4 }
|
|
|
|
|
|
fsMIStdOspfAreaBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of area border routers reach-
|
|
able within this area. This is initially zero,
|
|
and is calculated in each SPF Pass."
|
|
::= { fsMIStdOspfAreaEntry 5 }
|
|
|
|
fsMIStdOspfAsBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Autonomous System border
|
|
routers reachable within this area. This is
|
|
initially zero, and is calculated in each SPF
|
|
Pass."
|
|
::= { fsMIStdOspfAreaEntry 6 }
|
|
|
|
|
|
fsMIStdOspfAreaLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link-state advertisements
|
|
in this area's link-state database, excluding
|
|
AS External LSA's."
|
|
::= { fsMIStdOspfAreaEntry 7 }
|
|
|
|
|
|
fsMIStdOspfAreaLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the link-state ad-
|
|
vertisements' LS checksums contained in this
|
|
area's link-state database. This sum excludes
|
|
external (LS type 5) link-state advertisements.
|
|
The sum can be used to determine if there has
|
|
been a change in a router's link state data-
|
|
base, and to compare the link-state database of
|
|
two routers."
|
|
DEFVAL { 0 }
|
|
::= { fsMIStdOspfAreaEntry 8 }
|
|
|
|
fsMIStdOspfAreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAreaSummary (1),
|
|
sendAreaSummary (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable fsMIStdOspfAreaSummary controls the im-
|
|
port of summary LSAs into stub areas. It has
|
|
no effect on other areas.
|
|
|
|
If it is noAreaSummary, the router will neither
|
|
originate nor propagate summary LSAs into the
|
|
stub area. It will rely entirely on its de-
|
|
fault route.
|
|
|
|
If it is sendAreaSummary, the router will both
|
|
summarize and propagate summary LSAs."
|
|
DEFVAL { noAreaSummary }
|
|
::= { fsMIStdOspfAreaEntry 9 }
|
|
|
|
|
|
fsMIStdOspfAreaStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfAreaEntry 10 }
|
|
|
|
|
|
-- OSPF Area Default Metric Table
|
|
|
|
-- The OSPF Area Default Metric Table describes the metrics
|
|
-- that a default Area Border Router will advertise into a
|
|
-- Stub area.
|
|
|
|
|
|
fsMIStdOspfStubAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfStubAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of metrics that will be advertised by
|
|
a default Area Border Router into a stub area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2, Area Parameters"
|
|
::= { fsMIStdOspf 3 }
|
|
|
|
|
|
fsMIStdOspfStubAreaEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfStubAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric for a given Type of Service that
|
|
will be advertised by a default Area Border
|
|
Router into a stub area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2, Area Parameters"
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfStubAreaId, fsMIStdOspfStubTOS }
|
|
::= { fsMIStdOspfStubAreaTable 1 }
|
|
|
|
FsMIStdOspfStubAreaEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfStubAreaId
|
|
AreaID,
|
|
fsMIStdOspfStubTOS
|
|
TOSType,
|
|
fsMIStdOspfStubMetric
|
|
BigMetric,
|
|
fsMIStdOspfStubStatus
|
|
RowStatus,
|
|
fsMIStdOspfStubMetricType
|
|
INTEGER
|
|
}
|
|
|
|
fsMIStdOspfStubAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier for the Stub Area. On
|
|
creation, this can be derived from the in-
|
|
stance."
|
|
::= { fsMIStdOspfStubAreaEntry 1 }
|
|
|
|
|
|
fsMIStdOspfStubTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of Service associated with the
|
|
metric. On creation, this can be derived from
|
|
the instance."
|
|
::= { fsMIStdOspfStubAreaEntry 2 }
|
|
|
|
|
|
fsMIStdOspfStubMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value applied at the indicated type
|
|
of service. By default, this equals the least
|
|
metric at the type of service among the inter-
|
|
faces to other areas."
|
|
::= { fsMIStdOspfStubAreaEntry 3 }
|
|
|
|
|
|
fsMIStdOspfStubStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfStubAreaEntry 4 }
|
|
|
|
fsMIStdOspfStubMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ospfMetric (1), -- OSPF Metric
|
|
comparableCost (2), -- external type 1
|
|
nonComparable (3) -- external type 2
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the type of metric ad-
|
|
vertised as a default route."
|
|
DEFVAL { ospfMetric }
|
|
::= { fsMIStdOspfStubAreaEntry 5 }
|
|
|
|
-- OSPF Link State Database
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
|
|
fsMIStdOspfLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's Link State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { fsMIStdOspf 4 }
|
|
|
|
|
|
fsMIStdOspfLsdbEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfLsdbAreaId, fsMIStdOspfLsdbType,
|
|
fsMIStdOspfLsdbLsid, fsMIStdOspfLsdbRouterId }
|
|
::= { fsMIStdOspfLsdbTable 1 }
|
|
|
|
FsMIStdOspfLsdbEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfLsdbAreaId
|
|
AreaID,
|
|
fsMIStdOspfLsdbType
|
|
INTEGER,
|
|
fsMIStdOspfLsdbLsid
|
|
IpAddress,
|
|
fsMIStdOspfLsdbRouterId
|
|
RouterID,
|
|
fsMIStdOspfLsdbSequence
|
|
Integer32,
|
|
fsMIStdOspfLsdbAge
|
|
Integer32,
|
|
fsMIStdOspfLsdbChecksum
|
|
Integer32,
|
|
fsMIStdOspfLsdbAdvertisement
|
|
OCTET STRING
|
|
}
|
|
|
|
fsMIStdOspfLsdbAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspfLsdbEntry 1 }
|
|
|
|
-- External Link State Advertisements are permitted
|
|
-- for backward compatibility, but should be displayed in
|
|
-- the fsMIStdOspfExtLsdbTable rather than here.
|
|
|
|
fsMIStdOspfLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routerLink (1),
|
|
networkLink (2),
|
|
summaryLink (3),
|
|
asSummaryLink (4),
|
|
asExternalLink (5), -- but see fsMIStdOspfExtLsdbTable
|
|
multicastLink (6),
|
|
nssaExternalLink (7)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { fsMIStdOspfLsdbEntry 2 }
|
|
|
|
fsMIStdOspfLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { fsMIStdOspfLsdbEntry 3 }
|
|
fsMIStdOspfLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { fsMIStdOspfLsdbEntry 4 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
fsMIStdOspfLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { fsMIStdOspfLsdbEntry 5 }
|
|
|
|
|
|
fsMIStdOspfLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { fsMIStdOspfLsdbEntry 6 }
|
|
|
|
fsMIStdOspfLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { fsMIStdOspfLsdbEntry 7 }
|
|
|
|
|
|
fsMIStdOspfLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { fsMIStdOspfLsdbEntry 8 }
|
|
|
|
|
|
-- OSPF Host Table
|
|
|
|
-- The Host/Metric Table indicates what hosts are directly
|
|
-- attached to the Router, and what metrics and types of
|
|
-- service should be advertised for them.
|
|
|
|
fsMIStdOspfHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of Hosts, and their metrics, that the
|
|
router will advertise as host routes."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route param-
|
|
eters"
|
|
::= { fsMIStdOspf 5 }
|
|
|
|
|
|
fsMIStdOspfHostEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A metric to be advertised, for a given type of
|
|
service, when a given host is reachable."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfHostIpAddress, fsMIStdOspfHostTOS }
|
|
::= { fsMIStdOspfHostTable 1 }
|
|
|
|
FsMIStdOspfHostEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfHostIpAddress
|
|
IpAddress,
|
|
fsMIStdOspfHostTOS
|
|
TOSType,
|
|
fsMIStdOspfHostMetric
|
|
Metric,
|
|
fsMIStdOspfHostStatus
|
|
RowStatus,
|
|
fsMIStdOspfHostAreaID
|
|
AreaID
|
|
}
|
|
|
|
fsMIStdOspfHostIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Host."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { fsMIStdOspfHostEntry 1 }
|
|
|
|
|
|
fsMIStdOspfHostTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of Service of the route being config-
|
|
ured."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { fsMIStdOspfHostEntry 2 }
|
|
|
|
|
|
fsMIStdOspfHostMetric OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric to be advertised."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { fsMIStdOspfHostEntry 3 }
|
|
|
|
fsMIStdOspfHostStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfHostEntry 4 }
|
|
|
|
|
|
fsMIStdOspfHostAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area the Host Entry is to be found within.
|
|
By default, the area that a subsuming OSPF in-
|
|
terface is in, or 0.0.0.0"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspfHostEntry 5 }
|
|
|
|
|
|
-- OSPF Interface Table
|
|
|
|
-- The OSPF Interface Table augments the ipAddrTable
|
|
-- with OSPF specific information.
|
|
|
|
fsMIStdOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the inter-
|
|
faces from the viewpoint of OSPF."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { fsMIStdOspf 6 }
|
|
|
|
|
|
fsMIStdOspfIfEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one inter-
|
|
face from the viewpoint of OSPF."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfIfIpAddress, fsMIStdOspfAddressLessIf }
|
|
::= { fsMIStdOspfIfTable 1 }
|
|
|
|
FsMIStdOspfIfEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfIfIpAddress
|
|
IpAddress,
|
|
fsMIStdOspfAddressLessIf
|
|
Integer32,
|
|
fsMIStdOspfIfAreaId
|
|
AreaID,
|
|
fsMIStdOspfIfType
|
|
INTEGER,
|
|
fsMIStdOspfIfAdminStat
|
|
Status,
|
|
fsMIStdOspfIfRtrPriority
|
|
DesignatedRouterPriority,
|
|
fsMIStdOspfIfTransitDelay
|
|
UpToMaxAge,
|
|
fsMIStdOspfIfRetransInterval
|
|
UpToMaxAge,
|
|
fsMIStdOspfIfHelloInterval
|
|
HelloRange,
|
|
fsMIStdOspfIfRtrDeadInterval
|
|
PositiveInteger,
|
|
fsMIStdOspfIfPollInterval
|
|
PositiveInteger,
|
|
fsMIStdOspfIfState
|
|
INTEGER,
|
|
fsMIStdOspfIfDesignatedRouter
|
|
IpAddress,
|
|
fsMIStdOspfIfBackupDesignatedRouter
|
|
IpAddress,
|
|
fsMIStdOspfIfEvents
|
|
Counter32,
|
|
fsMIStdOspfIfAuthKey
|
|
OCTET STRING,
|
|
fsMIStdOspfIfStatus
|
|
RowStatus,
|
|
fsMIStdOspfIfMulticastForwarding
|
|
INTEGER,
|
|
fsMIStdOspfIfDemand
|
|
TruthValue,
|
|
fsMIStdOspfIfAuthType
|
|
Integer32,
|
|
fsMIStdOspfIfCryptoAuthType
|
|
Integer32
|
|
}
|
|
|
|
fsMIStdOspfIfIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface."
|
|
::= { fsMIStdOspfIfEntry 1 }
|
|
|
|
fsMIStdOspfAddressLessIf OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the purpose of easing the instancing of
|
|
addressed and addressless interfaces; This
|
|
variable takes the value 0 on interfaces with
|
|
IP Addresses, and the corresponding value of
|
|
ifIndex for interfaces having no IP Address."
|
|
::= { fsMIStdOspfIfEntry 2 }
|
|
fsMIStdOspfIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area
|
|
to which the interface connects. Area ID
|
|
0.0.0.0 is used for the OSPF backbone."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { fsMIStdOspfIfEntry 3 }
|
|
|
|
fsMIStdOspfIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast (1),
|
|
nbma (2),
|
|
pointToPoint (3),
|
|
pointToMultipoint (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface type.
|
|
|
|
By way of a default, this field may be intuited
|
|
from the corresponding value of ifType. Broad-
|
|
cast LANs, such as Ethernet and IEEE 802.5,
|
|
take the value 'broadcast', X.25 and similar
|
|
technologies take the value 'nbma', and links
|
|
that are definitively point to point take the
|
|
value 'pointToPoint'."
|
|
::= { fsMIStdOspfIfEntry 4 }
|
|
|
|
|
|
fsMIStdOspfIfAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface's administrative status.
|
|
The value formed on the interface, and the in-
|
|
terface will be advertised as an internal route
|
|
to some area. The value 'disabled' denotes
|
|
that the interface is external to OSPF."
|
|
DEFVAL { enabled }
|
|
::= { fsMIStdOspfIfEntry 5 }
|
|
|
|
fsMIStdOspfIfRtrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in
|
|
multi-access networks, this field is used in
|
|
the designated router election algorithm. The
|
|
value 0 signifies that the router is not eligi-
|
|
ble to become the designated router on this
|
|
particular network. In the event of a tie in
|
|
this value, routers will use their Router ID as
|
|
a tie breaker."
|
|
DEFVAL { 1 }
|
|
::= { fsMIStdOspfIfEntry 6 }
|
|
|
|
|
|
fsMIStdOspfIfTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link state update packet over this
|
|
interface."
|
|
DEFVAL { 1 }
|
|
::= { fsMIStdOspfIfEntry 7 }
|
|
|
|
|
|
fsMIStdOspfIfRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets."
|
|
DEFVAL { 5 }
|
|
::= { fsMIStdOspfIfEntry 8 }
|
|
|
|
|
|
fsMIStdOspfIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the in-
|
|
terface. This value must be the same for all
|
|
routers attached to a common network."
|
|
DEFVAL { 10 }
|
|
::= { fsMIStdOspfIfEntry 9 }
|
|
|
|
|
|
fsMIStdOspfIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for all routers attached
|
|
to a common network."
|
|
DEFVAL { 40 }
|
|
::= { fsMIStdOspfIfEntry 10 }
|
|
|
|
|
|
fsMIStdOspfIfPollInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The larger time interval, in seconds, between
|
|
the Hello packets sent to an inactive non-
|
|
broadcast multi- access neighbor."
|
|
DEFVAL { 120 }
|
|
::= { fsMIStdOspfIfEntry 11 }
|
|
|
|
|
|
fsMIStdOspfIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
loopback (2),
|
|
waiting (3),
|
|
pointToPoint (4),
|
|
designatedRouter (5),
|
|
backupDesignatedRouter (6),
|
|
otherDesignatedRouter (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface State."
|
|
DEFVAL { down }
|
|
::= { fsMIStdOspfIfEntry 12 }
|
|
|
|
|
|
fsMIStdOspfIfDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Designated Router."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { fsMIStdOspfIfEntry 13 }
|
|
|
|
|
|
fsMIStdOspfIfBackupDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Backup Designated
|
|
Router."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { fsMIStdOspfIfEntry 14 }
|
|
|
|
fsMIStdOspfIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this OSPF interface has
|
|
changed its state, or an error has occurred."
|
|
::= { fsMIStdOspfIfEntry 15 }
|
|
|
|
|
|
fsMIStdOspfIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Key. If the Area's Author-
|
|
ization Type is simplePassword, and the key
|
|
length is shorter than 8 octets, the agent will
|
|
left adjust and zero fill to 8 octets.
|
|
|
|
Note that unauthenticated interfaces need no
|
|
authentication key, and simple password authen-
|
|
tication cannot use a key of more than 8 oc-
|
|
tets. Larger keys are useful only with authen-
|
|
tication mechanisms not specified in this docu-
|
|
ment.
|
|
|
|
When read, fsMIStdOspfIfAuthKey always returns an Oc-
|
|
tet String of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { fsMIStdOspfIfEntry 16 }
|
|
|
|
fsMIStdOspfIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfIfEntry 17 }
|
|
|
|
|
|
fsMIStdOspfIfMulticastForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocked (1), -- no multicast forwarding
|
|
multicast (2), -- using multicast address
|
|
unicast (3) -- to each OSPF neighbor
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The way multicasts should forwarded on this
|
|
interface; not forwarded, forwarded as data
|
|
link multicasts, or forwarded as data link uni-
|
|
casts. Data link multicasting is not meaning-
|
|
ful on point to point and NBMA interfaces, and
|
|
setting fsMIStdOspfMulticastForwarding to 0 effective-
|
|
ly disables all multicast forwarding."
|
|
DEFVAL { blocked }
|
|
::= { fsMIStdOspfIfEntry 18 }
|
|
|
|
|
|
fsMIStdOspfIfDemand OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Demand OSPF procedures (hel-
|
|
lo supression to FULL neighbors and setting the
|
|
DoNotAge flag on proogated LSAs) should be per-
|
|
formed on this interface."
|
|
DEFVAL { false }
|
|
::= { fsMIStdOspfIfEntry 19 }
|
|
|
|
|
|
fsMIStdOspfIfAuthType OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an in-
|
|
terface. Additional authentication types may
|
|
be assigned locally."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { fsMIStdOspfIfEntry 20 }
|
|
|
|
fsMIStdOspfIfCryptoAuthType OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
-- Md5 (1),
|
|
-- Sha-1(2),
|
|
-- Sha-224(3),
|
|
-- Sha-256(4),
|
|
-- Sha-384(5),
|
|
-- Sha-512(6)
|
|
-- Reserved for future
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the cryptographic authentication algorithm to be
|
|
used. This can be configured only when fsMIStdOspfIfAuthType is
|
|
set to crypto. This object needs to be additionally configured for
|
|
SHA authentication, as standard mib does not support SHA configuration
|
|
as yet. "
|
|
|
|
DEFVAL { 1 } -- Md5, by default
|
|
::= {fsMIStdOspfIfEntry 21}
|
|
|
|
|
|
-- OSPF Interface Metric Table
|
|
|
|
-- The Metric Table describes the metrics to be advertised
|
|
-- for a specified interface at the various types of service.
|
|
-- As such, this table is an adjunct of the OSPF Interface
|
|
-- Table.
|
|
|
|
-- Types of service, as defined by RFC 791, have the ability
|
|
-- to request low delay, high bandwidth, or reliable linkage.
|
|
|
|
-- For the purposes of this specification, the measure of
|
|
-- bandwidth
|
|
|
|
-- Metric = 10^8 / ifSpeed
|
|
|
|
-- is the default value. For multiple link interfaces, note
|
|
-- that ifSpeed is the sum of the individual link speeds.
|
|
-- This yields a number having the following typical values:
|
|
|
|
-- Network Type/bit rate Metric
|
|
|
|
-- >= 100 MBPS 1
|
|
-- Ethernet/802.3 10
|
|
-- E1 48
|
|
-- T1 (ESF) 65
|
|
-- 64 KBPS 1562
|
|
-- 56 KBPS 1785
|
|
-- 19.2 KBPS 5208
|
|
-- 9.6 KBPS 10416
|
|
|
|
-- Routes that are not specified use the default (TOS 0) metric
|
|
|
|
fsMIStdOspfIfMetricTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfIfMetricEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TOS metrics for a non-virtual interface
|
|
identified by the interface index."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { fsMIStdOspf 7 }
|
|
|
|
fsMIStdOspfIfMetricEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfIfMetricEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A particular TOS metric for a non-virtual in-
|
|
terface identified by the interface index."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfIfMetricIpAddress,
|
|
fsMIStdOspfIfMetricAddressLessIf,
|
|
fsMIStdOspfIfMetricTOS }
|
|
::= { fsMIStdOspfIfMetricTable 1 }
|
|
|
|
FsMIStdOspfIfMetricEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfIfMetricIpAddress
|
|
IpAddress,
|
|
fsMIStdOspfIfMetricAddressLessIf
|
|
Integer32,
|
|
fsMIStdOspfIfMetricTOS
|
|
TOSType,
|
|
fsMIStdOspfIfMetricValue
|
|
Metric,
|
|
fsMIStdOspfIfMetricStatus
|
|
RowStatus
|
|
}
|
|
|
|
fsMIStdOspfIfMetricIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface. On row
|
|
creation, this can be derived from the in-
|
|
stance."
|
|
::= { fsMIStdOspfIfMetricEntry 1 }
|
|
|
|
fsMIStdOspfIfMetricAddressLessIf OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the purpose of easing the instancing of
|
|
addressed and addressless interfaces; This
|
|
variable takes the value 0 on interfaces with
|
|
IP Addresses, and the value of ifIndex for in-
|
|
terfaces having no IP Address. On row crea-
|
|
tion, this can be derived from the instance."
|
|
::= { fsMIStdOspfIfMetricEntry 2 }
|
|
|
|
|
|
fsMIStdOspfIfMetricTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of service metric being referenced.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { fsMIStdOspfIfMetricEntry 3 }
|
|
|
|
|
|
fsMIStdOspfIfMetricValue OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using this type of service on
|
|
this interface. The default value of the TOS 0
|
|
Metric is 10^8 / ifSpeed."
|
|
::= { fsMIStdOspfIfMetricEntry 4 }
|
|
|
|
fsMIStdOspfIfMetricStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfIfMetricEntry 5 }
|
|
|
|
|
|
-- OSPF Virtual Interface Table
|
|
|
|
-- The Virtual Interface Table describes the virtual
|
|
-- links that the OSPF Process is configured to
|
|
-- carry on.
|
|
|
|
fsMIStdOspfVirtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's virtual inter-
|
|
faces."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.4 Virtual link
|
|
parameters"
|
|
::= { fsMIStdOspf 8 }
|
|
|
|
|
|
fsMIStdOspfVirtIfEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single Virtual Interface."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfVirtIfAreaId, fsMIStdOspfVirtIfNeighbor }
|
|
::= { fsMIStdOspfVirtIfTable 1 }
|
|
|
|
FsMIStdOspfVirtIfEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfVirtIfAreaId
|
|
AreaID,
|
|
fsMIStdOspfVirtIfNeighbor
|
|
RouterID,
|
|
fsMIStdOspfVirtIfTransitDelay
|
|
UpToMaxAge,
|
|
fsMIStdOspfVirtIfRetransInterval
|
|
UpToMaxAge,
|
|
fsMIStdOspfVirtIfHelloInterval
|
|
HelloRange,
|
|
fsMIStdOspfVirtIfRtrDeadInterval
|
|
PositiveInteger,
|
|
fsMIStdOspfVirtIfState
|
|
INTEGER,
|
|
fsMIStdOspfVirtIfEvents
|
|
Counter32,
|
|
fsMIStdOspfVirtIfAuthKey
|
|
OCTET STRING,
|
|
fsMIStdOspfVirtIfStatus
|
|
RowStatus,
|
|
fsMIStdOspfVirtIfAuthType
|
|
Integer32,
|
|
fsMIStdOspfVirtIfCryptoAuthType
|
|
Integer32
|
|
}
|
|
|
|
fsMIStdOspfVirtIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area that the Virtual Link
|
|
traverses. By definition, this is not 0.0.0.0"
|
|
::= { fsMIStdOspfVirtIfEntry 1 }
|
|
|
|
|
|
fsMIStdOspfVirtIfNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the Virtual Neighbor."
|
|
::= { fsMIStdOspfVirtIfEntry 2 }
|
|
|
|
|
|
fsMIStdOspfVirtIfTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link- state update packet over this
|
|
interface."
|
|
DEFVAL { 1 }
|
|
::= { fsMIStdOspfVirtIfEntry 3 }
|
|
|
|
|
|
fsMIStdOspfVirtIfRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets. This
|
|
value should be well over the expected round-
|
|
trip time."
|
|
DEFVAL { 5 }
|
|
::= { fsMIStdOspfVirtIfEntry 4 }
|
|
|
|
|
|
fsMIStdOspfVirtIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the in-
|
|
terface. This value must be the same for the
|
|
virtual neighbor."
|
|
DEFVAL { 10 }
|
|
::= { fsMIStdOspfVirtIfEntry 5 }
|
|
|
|
|
|
fsMIStdOspfVirtIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for the virtual neigh-
|
|
bor."
|
|
DEFVAL { 60 }
|
|
::= { fsMIStdOspfVirtIfEntry 6 }
|
|
|
|
|
|
fsMIStdOspfVirtIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1), -- these use the same encoding
|
|
pointToPoint (4) -- as the fsMIStdOspfIfTable
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF virtual interface states."
|
|
DEFVAL { down }
|
|
::= { fsMIStdOspfVirtIfEntry 7 }
|
|
|
|
|
|
fsMIStdOspfVirtIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of state changes or error events on
|
|
this Virtual Link"
|
|
::= { fsMIStdOspfVirtIfEntry 8 }
|
|
|
|
|
|
fsMIStdOspfVirtIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Authentication Type is simplePassword, the
|
|
device will left adjust and zero fill to 8 oc-
|
|
tets.
|
|
|
|
Note that unauthenticated interfaces need no
|
|
authentication key, and simple password authen-
|
|
tication cannot use a key of more than 8 oc-
|
|
tets. Larger keys are useful only with authen-
|
|
tication mechanisms not specified in this docu-
|
|
ment.
|
|
|
|
When read, fsMIStdOspfVifAuthKey always returns a
|
|
string of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { fsMIStdOspfVirtIfEntry 9 }
|
|
|
|
|
|
fsMIStdOspfVirtIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfVirtIfEntry 10 }
|
|
|
|
|
|
fsMIStdOspfVirtIfAuthType OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for a virtu-
|
|
al interface. Additional authentication types
|
|
may be assigned locally."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { fsMIStdOspfVirtIfEntry 11 }
|
|
|
|
fsMIStdOspfVirtIfCryptoAuthType OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
-- Md5 (1),
|
|
-- Sha-1(2),
|
|
-- Sha-224(3),
|
|
-- Sha-256(4),
|
|
-- Sha-384(5),
|
|
-- Sha-512(6)
|
|
-- Reserved for future
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the cryptographic authentication algorithm to be used. This can be
|
|
configured only when fsMIStdOspfVirtIfAuthType is set to crypto. This object
|
|
needs to be additionally configured for SHA authentication, as the standard
|
|
OSPF mib does not support SHA authentication configuration as yet "
|
|
|
|
DEFVAL { 1 } -- Md5, by default
|
|
::= {fsMIStdOspfVirtIfEntry 12}
|
|
|
|
|
|
|
|
-- OSPF Neighbor Table
|
|
|
|
-- The OSPF Neighbor Table describes all neighbors in
|
|
-- the locality of the subject router.
|
|
|
|
fsMIStdOspfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of non-virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
::= { fsMIStdOspf 9 }
|
|
|
|
|
|
fsMIStdOspfNbrEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfNbrIpAddr, fsMIStdOspfNbrAddressLessIndex }
|
|
::= { fsMIStdOspfNbrTable 1 }
|
|
|
|
FsMIStdOspfNbrEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfNbrIpAddr
|
|
IpAddress,
|
|
fsMIStdOspfNbrAddressLessIndex
|
|
Integer32,
|
|
fsMIStdOspfNbrRtrId
|
|
RouterID,
|
|
fsMIStdOspfNbrOptions
|
|
Integer32,
|
|
fsMIStdOspfNbrPriority
|
|
DesignatedRouterPriority,
|
|
fsMIStdOspfNbrState
|
|
INTEGER,
|
|
fsMIStdOspfNbrEvents
|
|
Counter32,
|
|
fsMIStdOspfNbrLsRetransQLen
|
|
Gauge32,
|
|
fsMIStdOspfNbmaNbrStatus
|
|
RowStatus,
|
|
fsMIStdOspfNbmaNbrPermanence
|
|
INTEGER,
|
|
fsMIStdOspfNbrHelloSuppressed
|
|
TruthValue
|
|
}
|
|
|
|
fsMIStdOspfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this neighbor is using in its
|
|
IP Source Address. Note that, on addressless
|
|
links, this will not be 0.0.0.0, but the ad-
|
|
dress of another of the neighbor's interfaces."
|
|
::= { fsMIStdOspfNbrEntry 1 }
|
|
|
|
|
|
fsMIStdOspfNbrAddressLessIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On an interface having an IP Address, zero.
|
|
On addressless interfaces, the corresponding
|
|
value of ifIndex in the Internet Standard MIB.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { fsMIStdOspfNbrEntry 2 }
|
|
|
|
|
|
fsMIStdOspfNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { fsMIStdOspfNbrEntry 3 }
|
|
|
|
|
|
fsMIStdOspfNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field.
|
|
|
|
Bit 0, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 1, if set, indicates that the associated
|
|
area accepts and operates on external informa-
|
|
tion; if zero, it is a stub area.
|
|
|
|
Bit 2, if set, indicates that the system is ca-
|
|
pable of routing IP Multicast datagrams; i.e.,
|
|
that it implements the Multicast Extensions to
|
|
OSPF.
|
|
|
|
Bit 3, if set, indicates that the associated
|
|
area is an NSSA. These areas are capable of
|
|
carrying type 7 external advertisements, which
|
|
are translated into type 5 external advertise-
|
|
ments at NSSA borders."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.2 Options"
|
|
DEFVAL { 0 }
|
|
::= { fsMIStdOspfNbrEntry 4 }
|
|
|
|
|
|
fsMIStdOspfNbrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designat-
|
|
ed router election algorithm. The value 0 sig-
|
|
nifies that the neighbor is not eligible to be-
|
|
come the designated router on this particular
|
|
network."
|
|
DEFVAL { 1 }
|
|
::= { fsMIStdOspfNbrEntry 5 }
|
|
|
|
|
|
fsMIStdOspfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the relationship with this Neigh-
|
|
bor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
DEFVAL { down }
|
|
::= { fsMIStdOspfNbrEntry 6 }
|
|
|
|
|
|
fsMIStdOspfNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this neighbor relationship
|
|
has changed state, or an error has occurred."
|
|
::= { fsMIStdOspfNbrEntry 7 }
|
|
|
|
|
|
fsMIStdOspfNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { fsMIStdOspfNbrEntry 8 }
|
|
|
|
|
|
fsMIStdOspfNbmaNbrStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfNbrEntry 9 }
|
|
|
|
|
|
fsMIStdOspfNbmaNbrPermanence OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic (1), -- learned through protocol
|
|
permanent (2) -- configured address
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. 'dynamic' and 'permanent' refer to how
|
|
the neighbor became known."
|
|
DEFVAL { permanent }
|
|
::= { fsMIStdOspfNbrEntry 10 }
|
|
|
|
|
|
fsMIStdOspfNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor"
|
|
::= { fsMIStdOspfNbrEntry 11 }
|
|
|
|
|
|
-- OSPF Virtual Neighbor Table
|
|
|
|
-- This table describes all virtual neighbors.
|
|
-- Since Virtual Links are configured in the
|
|
-- virtual interface table, this table is read-only.
|
|
|
|
fsMIStdOspfVirtNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 15 Virtual Links"
|
|
::= { fsMIStdOspf 10 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual neighbor information."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfVirtNbrArea, fsMIStdOspfVirtNbrRtrId }
|
|
::= { fsMIStdOspfVirtNbrTable 1 }
|
|
|
|
FsMIStdOspfVirtNbrEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfVirtNbrArea
|
|
AreaID,
|
|
fsMIStdOspfVirtNbrRtrId
|
|
RouterID,
|
|
fsMIStdOspfVirtNbrIpAddr
|
|
IpAddress,
|
|
fsMIStdOspfVirtNbrOptions
|
|
Integer32,
|
|
fsMIStdOspfVirtNbrState
|
|
INTEGER,
|
|
fsMIStdOspfVirtNbrEvents
|
|
Counter32,
|
|
fsMIStdOspfVirtNbrLsRetransQLen
|
|
Gauge32,
|
|
fsMIStdOspfVirtNbrHelloSuppressed
|
|
TruthValue
|
|
}
|
|
|
|
fsMIStdOspfVirtNbrArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area Identifier."
|
|
::= { fsMIStdOspfVirtNbrEntry 1 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
neighboring router in the Autonomous System."
|
|
::= { fsMIStdOspfVirtNbrEntry 2 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this Virtual Neighbor is us-
|
|
ing."
|
|
::= { fsMIStdOspfVirtNbrEntry 3 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field.
|
|
|
|
Bit 1, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 2, if set, indicates that the system is
|
|
Network Multicast capable; ie, that it imple-
|
|
ments OSPF Multicast Routing."
|
|
::= { fsMIStdOspfVirtNbrEntry 4 }
|
|
fsMIStdOspfVirtNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Virtual Neighbor Relation-
|
|
ship."
|
|
::= { fsMIStdOspfVirtNbrEntry 5 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this virtual link has
|
|
changed its state, or an error has occurred."
|
|
::= { fsMIStdOspfVirtNbrEntry 6 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { fsMIStdOspfVirtNbrEntry 7 }
|
|
|
|
|
|
fsMIStdOspfVirtNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor"
|
|
::= { fsMIStdOspfVirtNbrEntry 8 }
|
|
|
|
-- OSPF Link State Database, External
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
-- This table is identical to the OSPF LSDB Table in
|
|
-- format, but contains only External Link State
|
|
-- Advertisements. The purpose is to allow external
|
|
-- LSAs to be displayed once for the router rather
|
|
-- than once in each non-stub area.
|
|
|
|
fsMIStdOspfExtLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's Links State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { fsMIStdOspf 11 }
|
|
|
|
|
|
fsMIStdOspfExtLsdbEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfExtLsdbType, fsMIStdOspfExtLsdbLsid, fsMIStdOspfExtLsdbRouterId }
|
|
::= { fsMIStdOspfExtLsdbTable 1 }
|
|
|
|
FsMIStdOspfExtLsdbEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfExtLsdbType
|
|
INTEGER,
|
|
fsMIStdOspfExtLsdbLsid
|
|
IpAddress,
|
|
fsMIStdOspfExtLsdbRouterId
|
|
RouterID,
|
|
fsMIStdOspfExtLsdbSequence
|
|
Integer32,
|
|
fsMIStdOspfExtLsdbAge
|
|
Integer32,
|
|
fsMIStdOspfExtLsdbChecksum
|
|
Integer32,
|
|
fsMIStdOspfExtLsdbAdvertisement
|
|
OCTET STRING
|
|
}
|
|
|
|
fsMIStdOspfExtLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asExternalLink (5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { fsMIStdOspfExtLsdbEntry 1 }
|
|
|
|
|
|
fsMIStdOspfExtLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { fsMIStdOspfExtLsdbEntry 2 }
|
|
|
|
|
|
fsMIStdOspfExtLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { fsMIStdOspfExtLsdbEntry 3 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
fsMIStdOspfExtLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { fsMIStdOspfExtLsdbEntry 4 }
|
|
|
|
|
|
fsMIStdOspfExtLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { fsMIStdOspfExtLsdbEntry 5 }
|
|
|
|
|
|
fsMIStdOspfExtLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { fsMIStdOspfExtLsdbEntry 6 }
|
|
|
|
|
|
fsMIStdOspfExtLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(36))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { fsMIStdOspfExtLsdbEntry 7 }
|
|
|
|
|
|
-- OSPF Use of the CIDR Route Table
|
|
|
|
fsMIStdOspfRouteGroup OBJECT IDENTIFIER ::= { fsMIStdOspf 12 }
|
|
|
|
-- The IP Forwarding Table defines a number of objects for use by
|
|
-- the routing protocol to externalize its information. Most of
|
|
-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
|
|
-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
|
|
-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
|
|
-- defined there.
|
|
|
|
-- Those that leave some discretion are defined here.
|
|
|
|
-- ipCidrRouteProto is, of course, fsMIStdOspf (12).
|
|
|
|
-- ipCidrRouteAge is the time since the route was first calculated,
|
|
-- as opposed to the time since the last SPF run.
|
|
|
|
-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
|
|
-- protocol. The following values shall be found there depending
|
|
-- on the way the route was calculated.
|
|
|
|
fsMIStdOspfIntraArea OBJECT IDENTIFIER ::= { fsMIStdOspfRouteGroup 1 }
|
|
fsMIStdOspfInterArea OBJECT IDENTIFIER ::= { fsMIStdOspfRouteGroup 2 }
|
|
fsMIStdOspfExternalType1 OBJECT IDENTIFIER ::= { fsMIStdOspfRouteGroup 3 }
|
|
fsMIStdOspfExternalType2 OBJECT IDENTIFIER ::= { fsMIStdOspfRouteGroup 4 }
|
|
|
|
-- ipCidrRouteMetric1 is, by definition, the primary routing
|
|
-- metric. Therefore, it should be the metric that route
|
|
-- selection is based on. For intra-area and inter-area routes,
|
|
-- it is an OSPF metric. For External Type 1 (comparable value)
|
|
-- routes, it is an OSPF metric plus the External Metric. For
|
|
-- external Type 2 (non-comparable value) routes, it is the
|
|
-- external metric.
|
|
|
|
-- ipCidrRouteMetric2 is, by definition, a secondary routing
|
|
-- metric. Therefore, it should be the metric that breaks a tie
|
|
-- among routes having equal metric1 values and the same
|
|
-- calculation rule. For intra-area, inter-area routes, and
|
|
-- External Type 1 (comparable value) routes, it is unused. For
|
|
-- external Type 2 (non-comparable value) routes, it is the metric
|
|
-- to the AS border router.
|
|
|
|
-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
|
|
-- unused.
|
|
|
|
--
|
|
-- The OSPF Area Aggregate Table
|
|
--
|
|
-- This table replaces the OSPF Area Summary Table, being an
|
|
-- extension of that for CIDR routers.
|
|
|
|
fsMIStdOspfAreaAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIStdOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range of IP addresses specified by an IP
|
|
address/IP network mask pair. For example,
|
|
class B address range of X.X.X.X with a network
|
|
mask of 255.255.0.0 includes all IP addresses
|
|
from X.X.0.0 to X.X.255.255. Note that if
|
|
ranges are configured such that one range sub-
|
|
sumes another range (e.g., 10.0.0.0 mask
|
|
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
|
|
most specific match is the preferred one."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspf 13 }
|
|
|
|
|
|
fsMIStdOspfAreaAggregateEntry OBJECT-TYPE
|
|
SYNTAX FsMIStdOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range of IP addresses specified by an IP
|
|
address/IP network mask pair. For example,
|
|
class B address range of X.X.X.X with a network
|
|
mask of 255.255.0.0 includes all IP addresses
|
|
from X.X.0.0 to X.X.255.255. Note that if
|
|
ranges are range configured such that one range
|
|
subsumes another range (e.g., 10.0.0.0 mask
|
|
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
|
|
most specific match is the preferred one."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
INDEX { fsMIStdOspfContextId, fsMIStdOspfAreaAggregateAreaID, fsMIStdOspfAreaAggregateLsdbType,
|
|
fsMIStdOspfAreaAggregateNet, fsMIStdOspfAreaAggregateMask }
|
|
::= { fsMIStdOspfAreaAggregateTable 1 }
|
|
|
|
|
|
FsMIStdOspfAreaAggregateEntry ::=
|
|
SEQUENCE {
|
|
fsMIStdOspfAreaAggregateAreaID
|
|
AreaID,
|
|
fsMIStdOspfAreaAggregateLsdbType
|
|
INTEGER,
|
|
fsMIStdOspfAreaAggregateNet
|
|
IpAddress,
|
|
fsMIStdOspfAreaAggregateMask
|
|
IpAddress,
|
|
fsMIStdOspfAreaAggregateStatus
|
|
RowStatus,
|
|
fsMIStdOspfAreaAggregateEffect
|
|
INTEGER
|
|
}
|
|
|
|
fsMIStdOspfAreaAggregateAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area the Address Aggregate is to be found
|
|
within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspfAreaAggregateEntry 1 }
|
|
|
|
|
|
fsMIStdOspfAreaAggregateLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
summaryLink (3),
|
|
nssaExternalLink (7)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the Address Aggregate. This field
|
|
specifies the Lsdb type that this Address Ag-
|
|
gregate applies to."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { fsMIStdOspfAreaAggregateEntry 2 }
|
|
|
|
|
|
fsMIStdOspfAreaAggregateNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Net or Subnet indicated
|
|
by the range."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspfAreaAggregateEntry 3 }
|
|
|
|
|
|
fsMIStdOspfAreaAggregateMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Subnet Mask that pertains to the Net or
|
|
Subnet."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { fsMIStdOspfAreaAggregateEntry 4 }
|
|
|
|
|
|
fsMIStdOspfAreaAggregateStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { fsMIStdOspfAreaAggregateEntry 5 }
|
|
|
|
|
|
fsMIStdOspfAreaAggregateEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertiseMatching (1),
|
|
doNotAdvertiseMatching (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnets subsumed by ranges either trigger the
|
|
advertisement of the indicated aggregate (ad-
|
|
vertiseMatching), or result in the subnet's not
|
|
being advertised at all outside the area."
|
|
DEFVAL { advertiseMatching }
|
|
::= { fsMIStdOspfAreaAggregateEntry 6 }
|
|
|
|
END
|
|
|