WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/aricent/ARICENT-ISSU-MIB

469 lines
15 KiB
Plaintext
Raw Permalink Blame History

--*********************************************************************
-- Copyright (C) 2015 Aricent Group . All Rights Reserved
--$Id: fsissu.mib,v 1.4 2015/12/14 11:05:19 siva Exp $
--Description: This file contains MIB definitions for
-- In-Service Software Upgrade (ISSU) Feature.
--*********************************************************************/
ARICENT-ISSU-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
enterprises, Integer32, NOTIFICATION-TYPE FROM SNMPv2-SMI
TruthValue,
TimeStamp,
DisplayString FROM SNMPv2-TC;
fsIssu MODULE-IDENTITY
LAST-UPDATED "201507010000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO
"ARICENT COMMUNICATIONS SOFTWARE
3460 Hillview Avenue,
Palo Alto, CA 94304-1388, USA,
Phone: +1-650-391-1088
E-mail:support@aricent.com"
DESCRIPTION
"The MIB module for In-Service Software Upgrade (ISSU) feature."
REVISION "201507010000Z"
DESCRIPTION
"The enterprise ID 29601 is assigned to Aricent Communication
Holdings Limited. This is the initial version for ISSU module
related mib objects."
::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 103 }
-- ----------------------------------------------------------------- --
-- The different groups in Aricent ISSU MIB are as follows:
-- ----------------------------------------------------------------- --
fsIssuSystem OBJECT IDENTIFIER ::= { fsIssu 1 }
fsIssuNotifications OBJECT IDENTIFIER ::= { fsIssu 2 }
-- ----------------------------------------------------------------- --
-- fsIssuSystem - System group BEGIN
-- Specifying path for various software images/files
fsIssuMaintenanceMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the system to enter into maintenance mode or exit from maintenance
mode.
When this object is set as 'TRUE' it triggers the system to enter into
maintenance mode in which In-Service Software Upgrade (ISSU) can be
carried out.
During this mode,
--> Management configuration to the system other than ISSU related
commands/objects are not allowed.
--> Hardware MAC table is frozen.
--> Protocols are maintained in the same state.
--> New programming to hardware will not be allowed.
When this object is set as 'FALSE' it triggers the system to exit from the
maintenance mode to restore normal system operations."
::= { fsIssuSystem 1 }
fsIssuMaintenanceOperStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the configured maintenance mode is functionally
applied to the system or not.
When 'Maintenance mode' is set as 'TRUE' the 'maintenance operational
status' may be initially false.
If there are any on-going remote NP calls from active node to standby node's
hardware, those calls will be serviced and then the operational status
becomes 'TRUE'.
If there are no such pending remote NP calls, the 'maintenance operational
status' immediately becomes'TRUE'.
When 'Maintenance mode' is set as 'FALSE' the normal system operations
are restored and'maintenance operational status' becomes 'FLASE'."
::= { fsIssuSystem 2 }
fsIssuLoadSWPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the path of the new software that can be
loaded to the system through In-Service Software Upgrade procedure."
::= { fsIssuSystem 3 }
fsIssuRollbackSWPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the path from which software will be loaded if
ISSU fails [during software upgrade]. After ISSU is completed,
this will be same as the current software path. This MIB object is to aid
the operator in the roll-back process and the operator is expected to
initiate the roll-back if ISSU fails"
::= { fsIssuSystem 4 }
fsIssuCurrentSWPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the path of the current running software"
::= { fsIssuSystem 5 }
------- Software Compatibility Check objects ---------
fsIssuSoftwareCompatFilePath OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the path of the compatibility matrix file.
When software compatibility check is initiated, current software
version will be verified against this compatibility matrix file."
::= { fsIssuSystem 6 }
fsIssuSoftwareCompatCheckInit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the software compatibility check initiation control.
When this object is set as 'true', software compatibility
check will be initiated.
Before initiating the compatibility check the software version proposed to be
loaded has to be configured through object 'fsIssuSoftwareCompatForVersion'.
When compatibility check is initiated, ISS will check the proposed software
version - first in the compatibility file in the location configured in
'fsIssuSoftwareCompatFilePath'.If the proposed software version is present,
then that result will be 'compatible'.
If the above verification fails, then verification will be made in the
compatibility-matrix file of current running software (Present in one
of the flash banks).If the proposed software version is present in this file,
then the result will be 'compatible'.
Otherwise the proposed software is considered to be 'in-compatible'
with the current running software version.
After initiating the compatibility check, this object returns back to
'false' ."
DEFVAL { false }
::= { fsIssuSystem 7 }
fsIssuSoftwareCompatCheckStatus OBJECT-TYPE
SYNTAX INTEGER {
notinitiated(0),
fullcompatible(1),
basecompatible(2),
incompatible(3),
checkinprogress(4),
failed(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the result of previous software compatibility
check initiated.
notinitiated - ISSU compatibility check is not initiated and this
is the default state.
fullcompatible/ basecompatible - The current running software is
compatible with the new software for upgrade/downgrade. The level
of compatibility is either fullcompatible or basecompatible.
incompatible - The current running software is NOT compatible with
the new software for upgrade/downgrade.
checkinprogress - The compatibility check is going on.
failed - The compatibility check has failed"
DEFVAL { notinitiated }
::= { fsIssuSystem 8 }
------- In-Service Software Upgrade Operation Objects --------------
fsIssuMode OBJECT-TYPE
SYNTAX INTEGER {
fullcompatible(1),
basecompatible(2),
incompatible(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ISSU upgrade process that can be done in two modes.
- In 'fullcompatible' software upgrade, the node which gets upgraded
gets reloaded in 'warm-boot mode'. Hence data traffic through that
node does not get impacted during the upgrade procedure.
Static configuration and dynamic states are synched up from the active
node to the upgraded standby node.
This mode is feasible ONLY when software upgrade is across minor releases.
- In 'basecompatible' software upgrade, the standby node which gets
upgraded is booted in 'cold-boot'mode.
Static configuration and dynamic states are synched up from the active
node to the upgraded standby node.
This mode feasible for a major version of software upgrade.
- In 'incompatible' software upgrade, the standby node which gets
upgraded is booted in 'cold-boot'mode.
The static configuration and dynamic states are NOT synched up from the
active node.
When software upgrade to an incompatible software version is required
then ISSU in 'incompatible mode' should be configured.
The administrator triggered compatibility check helps to decide whether
the ISSU mode has to be configure in fullcompatible, basecompatible
or incompatible mode.
Note:
- Configuring 'fullcompatible or basecompatible mode' of ISSU, will leave
system unpredictable when the compatibility check resulted 'incompatible'.
- Appropriate ISSU mode should be configured before starting the ISSU
procedure through ISSU commands"
DEFVAL { fullcompatible }
::= { fsIssuSystem 9 }
fsIssuCommand OBJECT-TYPE
SYNTAX INTEGER {
loadversion(1),
forcestandby(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies ISSU process that has the following three steps to upgrade the software in both
active and standby nodes.
loadversion - Load new software in fullcompatible, basecompatible mode
or incompatible mode based on the configured ISSU Mode. The software present
in the path specified in 'LoadSWPath' object will be loaded to the node.
Note :-
o In case of fullcompatible mode, issuing 'loadversion' will boot up the
node in warm-boot mode.
o In case of basecompatible and incompatible mode, issuing 'loadversion'
will boot up the node in cold-boot mode.
Hence the services established over the node that is undergoing reload will
be impacted.
ForceStandby - This command has to be applied to a active node.
Forces the Active node to become Standby node.
The ISSU commands have to be issued only in Maintenance Mode in the given
order.
The order is :
o Loadversion (in standby node)
o ForceStandby (in original active node)
o Load version (in old active node)."
::= { fsIssuSystem 10 }
fsIssuCommandStatus OBJECT-TYPE
SYNTAX INTEGER {
notstarted(0),
inprogress(1),
successful(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the status of previous ISSU command
notstarted - ISSU command is not triggered and this is the default state.
inprogress - Indicates that the command is in progress.
successful - Indicates that the command actions are completed
SUCCESSFULLY.
failed - Indicates that the command has FAILED."
DEFVAL { notstarted }
::= { fsIssuSystem 11 }
fsIssuProcedureStatus OBJECT-TYPE
SYNTAX INTEGER {
notinitiated(0),
inprogress(1),
successful(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the overall status of previous ISSU procedure.
notinitiated - ISSU command is not triggered and this is the default state.
inprogress - Indicates that the ISSU procedure is in progress.
The 'ISSU State' will indicate the exact ISSU stage.
successful - Indicates that the previous ISSU procedure was completed
SUCCESSFULLY.
failed - Indicates that the previous ISSU procedure has FAILED."
DEFVAL { notinitiated }
::= { fsIssuSystem 12 }
fsIssuRollbackSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the version of the rollback software. When ISSU procedure has failed,
the system should be rolled back to this software version.
When ISSU is completed, this software version will be same as
current running Software version"
::= { fsIssuSystem 13 }
---------- Trace Facility related objects ------------
fsIssuTraceOption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables tracing in the selected
Issu Management module.
A 32 bit integer is used to store the Tracing level in the
specified module.
Different Tracing Levels -
BIT 0 - Init and Shutdown Traces
BIT 1 - Management Traces
BIT 2 - All Failure Traces
BIT 3 - Control Plane traces.
BIT 4 - Critical Traces
Various combinations of levels are allowed.
For example if the bits 0 and 1 are set, then the Trace
Statements related to Init-Shutdown and management
will be printed.
if the bit value is 3 then state machine transitions and
ISSU feature related traces will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are set then user has to
set the value 3."
DEFVAL{0}
::= { fsIssuSystem 14 }
fsIssuTrapStatus OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables the trap for ISSU Management feature."
DEFVAL { enable }
::= { fsIssuSystem 15 }
fsIssuLastUpgradeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object holds the timestamp of last software upgrade/downgrade through
ISSU procedure."
::= { fsIssuSystem 16 }
fsIssuSoftwareCompatForVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the software version proposed to be loaded to the system
for which compatibility relationship with the current running software
needs to be verified.
When software compatibility check is initiated, this 'proposed software version'
will be verified in the compatibility matrix file in the row corresponding to the
'running software version.'
"
::= { fsIssuSystem 17 }
-- fsIssuSystem - System group END
-- fsIssuTraps - Traps group BEGIN
-- ----------------------------------------------------------------- --
fsIssuTraps OBJECT IDENTIFIER ::= { fsIssuNotifications 0 }
-- ----------------------------------------------------------------- --
------ Trap related objects --------
fsIssuMaintenanceStatusTrap NOTIFICATION-TYPE
OBJECTS {
fsIssuMaintenanceMode,
fsIssuMaintenanceOperStatus
}
STATUS current
DESCRIPTION
"This object specifies the generation of the trap whenever the ISSU maintenance mode
(operational) changes."
::= { fsIssuTraps 1 }
fsIssuCommandStatusTrap NOTIFICATION-TYPE
OBJECTS {
fsIssuCommand,
fsIssuCommandStatus
}
STATUS current
DESCRIPTION
"This object specifies the generation of the trap when the ISSU commands like load version/
force-standby are completed."
::= { fsIssuTraps 2 }
fsIssuProcedureStatusTrap NOTIFICATION-TYPE
OBJECTS {
fsIssuProcedureStatus
}
STATUS current
DESCRIPTION
"This object specifies the generation of the trap whenever the ISSU procedure is started
and completed. The status of overall ISSU procedure state will be
indicated as inprogress/successful/failed. "
::= { fsIssuTraps 3 }
-- fsIssuTraps - Traps group END
END
View Git Blame Copy Permalink