WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/alvarion/RAINBOW-SERVICES-MIB

2250 lines
88 KiB
Plaintext
Raw Permalink Blame History

-- ============================================================
-- Description :
--
-- Rainbow Services Management Information Base
--
-- 06/06/2006
--
--
-- ============================================================
RAINBOW-SERVICES-MIB DEFINITIONS ::= BEGIN
IMPORTS
rainbow
FROM RAINBOW-MIB
DisplayString, RowStatus, MacAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Counter32, Unsigned32
FROM SNMPv2-SMI;
rainbowServices MODULE-IDENTITY
LAST-UPDATED "200606061500Z"
ORGANIZATION "Alvarion Ltd."
CONTACT-INFO "Alvarion Customer Service
Postal: Alvarion Ltd.
Barzel 21
Tel Aviv 69710
ISRAEL
E-mail: CS_Coordinator@alvarion.com"
DESCRIPTION
"Rainbow Services"
REVISION "200606061500Z"
DESCRIPTION
"Revision 2.5"
::= { rainbow 100 }
RainbowServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The Service Type:
Layer II (1) service transports Layer 2 (Ethernet) frames between a subscriber's site and the Network Resource
located behind the provider's backbone and/or between subscriber sites. Layer II service supports also telephony
services (same services that are available with the VoIP service) for Voice Gateways that use the proprietary DRAP protocol.
PPPoE (2) service provides connectivity between a PPPoE (Point-to-Point Protocol over Ethernet) enabled devices at the
subscriber's site and a PPPoE aware Access Concentrator behind the Base Station/Micro Base Station.
VoIP (3) service provides telephony services through an external Voice Gateway connected to the Subscriber Unit's data port.
The VoIP service is designed for Voice Gateways that use the proprietary DRAP protocol to identify VoIP sessions and to
verify optimal handling of these sessions by the wireless network."
SYNTAX INTEGER { rbLayerII ( 1 ) , rbPPPoE ( 2 ) , rbVoIP ( 3 ) }
-- alvarion OBJECT IDENTIFIER
-- ::= { enterprises 12394 }
-- products OBJECT IDENTIFIER
-- ::= { alvarion 1 }
-- rainbow OBJECT IDENTIFIER
-- ::= { products 2 }
rbServiceGeneralConfig OBJECT IDENTIFIER
::= { rainbowServices 1 }
rbServiceTemplate OBJECT IDENTIFIER
::= { rainbowServices 2 }
rbServices OBJECT IDENTIFIER
::= { rainbowServices 3 }
rbQoSProfiles OBJECT IDENTIFIER
::= { rainbowServices 4 }
rbPolicyRules OBJECT IDENTIFIER
::= { rainbowServices 5 }
rbForwardingRules OBJECT IDENTIFIER
::= { rainbowServices 6 }
rbSubscribersInfo OBJECT IDENTIFIER
::= { rainbowServices 7 }
rbFilteringSystem OBJECT IDENTIFIER
::= { rainbowServices 8 }
rbXmlErrorReport OBJECT IDENTIFIER
::= { rainbowServices 10 }
-- ============================================================
-- Rainbow Subscribers Configuration Table
-- ============================================================
rbSubscriberTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbSubscriberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Subscribers"
::= { rbSubscribersInfo 1 }
rbSubscriberEntry OBJECT-TYPE
SYNTAX RbSubscriberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Subscribers Table. Includes parameters of the relevant Subscriber."
INDEX { rbSubscriberIdx }
::= { rbSubscriberTable 1 }
RbSubscriberEntry ::= SEQUENCE {
rbSubscriberIdx Unsigned32,
rbSubscriberID DisplayString,
rbSubscriberFirstName DisplayString,
rbSubscriberLastName DisplayString,
rbSubscriberAdminStatus INTEGER,
rbSubscriberInfo DisplayString,
rbASubscriberRowStatus RowStatus
}
rbSubscriberIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant Subscriber Entry."
::= { rbSubscriberEntry 1 }
rbSubscriberID OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 32 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name of the relevant Subscriber. Must be unique in the device."
::= { rbSubscriberEntry 2 }
rbSubscriberFirstName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 50 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subscriber's First Name. An optional parameter for information purposes."
::= { rbSubscriberEntry 3 }
rbSubscriberLastName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 50 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subscriber's Last Name. An optional parameter for information purposes."
::= { rbSubscriberEntry 4 }
rbSubscriberAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subscriber's Admin Status. If the Admin status is disabled, the Subscriber will not get Services."
DEFVAL { enable }
::= { rbSubscriberEntry 5 }
rbSubscriberInfo OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 50 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subscriber's additional info. An optional parameter for information purposes."
::= { rbSubscriberEntry 6 }
rbASubscriberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbSubscriberEntry 7 }
-- ============================================================
-- Rainbow Service Templates Configuration Table
-- ============================================================
rbServiceTemplateConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbServiceTemplateConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Service Templates (Profiles)."
::= { rbServiceTemplate 1 }
rbServiceTemplateConfigEntry OBJECT-TYPE
SYNTAX RbServiceTemplateConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Service Templates Table. Includes parameters of the relevant Service Template."
INDEX { rbServiceTemplateType, rbServiceTemplateIdx }
::= { rbServiceTemplateConfigTable 1 }
RbServiceTemplateConfigEntry ::= SEQUENCE {
rbServiceTemplateType RainbowServiceType,
rbServiceTemplateIdx Unsigned32,
rbServiceTemplateName DisplayString,
rbServiceTemplateID Unsigned32,
rbServiceTemplateBaseVLAN Integer32,
rbServiceTemplateBaseSignallingVLAN Integer32,
rbServiceTemplateBaseDhcpVLAN Integer32,
rbServiceTemplateForwardDhcpRequest INTEGER,
rbServiceTemplateNumberOfSimultaneousCalls Integer32,
rbServiceTemplatePolicyRuleIdx Unsigned32,
rbServiceTemplatePolicyRuleName DisplayString,
rbServiceTemplateForwardingRuleIdx Unsigned32,
rbServiceTemplateForwardingRuleName DisplayString,
rbAServiceTemplateRowStatus RowStatus,
rbServiceTemplateQoSMarkingMode INTEGER,
rbServiceTemplateQoSMarkingValue Integer32,
rbServiceTemplateVLANTransparencyMode INTEGER,
rbServiceTemplateClass INTEGER
}
rbServiceTemplateType OBJECT-TYPE
SYNTAX RainbowServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service Type of the Service Template. The Service Template Type can be set only for a new Service Template (write-once).
The Service Template Type of an existing Service Template cannot be changed (read-only)."
::= { rbServiceTemplateConfigEntry 1 }
rbServiceTemplateIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant Service Template Entry."
::= { rbServiceTemplateConfigEntry 2 }
rbServiceTemplateName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 32 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name of the Service Template - unique per Device."
::= { rbServiceTemplateConfigEntry 3 }
rbServiceTemplateID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service Template ID assigned by the Device (DB ID) - unique per Device."
::= { rbServiceTemplateConfigEntry 4 }
rbServiceTemplateBaseVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN tag (VPL ID) used in the backbone domain. A number in the range between
0 and 4094. A value of 4095 means No VPL ID.
Not applicable if VLAN Transparency Mode is enabled."
::= { rbServiceTemplateConfigEntry 5 }
rbServiceTemplateBaseSignallingVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Not used!"
::= { rbServiceTemplateConfigEntry 6 }
rbServiceTemplateBaseDhcpVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Not used!"
::= { rbServiceTemplateConfigEntry 7 }
rbServiceTemplateForwardDhcpRequest OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Not used!"
::= { rbServiceTemplateConfigEntry 8 }
rbServiceTemplateNumberOfSimultaneousCalls OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 50 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of simultaneous VoIP calls (DRAP-based) that can be supported.
Applicable only for Layer II and VoIP Services."
::= { rbServiceTemplateConfigEntry 9 }
rbServiceTemplatePolicyRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the selected entry in the Policy Rules Table = selected Policy Rule.
Not applicable for VoIP services!"
::= { rbServiceTemplateConfigEntry 10 }
rbServiceTemplatePolicyRuleName OBJECT-TYPE
SYNTAX DisplayString ( SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name of the selected Policy Rule. Not applicable for VoIP services!"
::= { rbServiceTemplateConfigEntry 11 }
rbServiceTemplateForwardingRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the selected entry in the row in Forwarding Rules Table = selected Forwarding Rule.
Not applicable if VLAN Transparency Mode is enabled.
The Service Type defined in the selected Forwarding Rule must match the one defined for the Service Template."
::= { rbServiceTemplateConfigEntry 12 }
rbServiceTemplateForwardingRuleName OBJECT-TYPE
SYNTAX DisplayString ( SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the selected Forwarding Rule."
::= { rbServiceTemplateConfigEntry 13 }
rbAServiceTemplateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active.
destroy (6) is used for deleting an existing entry."
::= { rbServiceTemplateConfigEntry 14 }
rbServiceTemplateQoSMarkingMode OBJECT-TYPE
SYNTAX INTEGER { transparent( 1 ), rb8021p ( 2 ), rbDSCP ( 3 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method the device uses to mark the uplink traffic to the backbone.
transparent (1): No Priority Marking. The system forwards the frames to the uplink network without any changes.
rb8021p (2): All frames are marked with the configured Base VLAN (VPL ID) and 802.1p QoS Marking Value.
If no Base VLAN is configured (Base VLAN = 4095), the 802.1Q header will include a VLAN ID = 0.
rbDSCP (3): All frames are marked with the configured DSCP QoS Marking Value."
::= { rbServiceTemplateConfigEntry 15 }
rbServiceTemplateQoSMarkingValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Marking value used to mark frames forwarded to thebackbone. Applicable only if the selected QoS Marking
Mode is either 802.1p (rp8021p) or DSCP (rbDSCP).
For 802.1p Marking Mode the range is from 0 to 7.
For DSCP Marking Mode the range is from 0 to 63."
::= { rbServiceTemplateConfigEntry 16 }
rbServiceTemplateVLANTransparencyMode OBJECT-TYPE
SYNTAX INTEGER { enable( 1 ), disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN Transparency Mode defines the method of transferring packets
to the operator's upstream network.
When set to enable, data packets sent from the Base Station to the backbone
will be transferred transparently.
When set to disable, data packets sent from the Base Station to the backbone
will be transferred with a VLAN tag according to the VPL ID.
The VLAN ID in tagged frames arriving from the wireless network will be replaced by the VPL ID."
::= { rbServiceTemplateConfigEntry 17 }
rbServiceTemplateClass OBJECT-TYPE
SYNTAX INTEGER { local ( 1 ) , global ( 2 ) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Service Template Class: Local definition or Global (Managed) definition using an XML File.
In a Global Service Template all parameters become read-only."
::= { rbServiceTemplateConfigEntry 18 }
-- ============================================================
-- Rainbow Services Configuration Table
-- Service configuration parameters for specific SU are retrieved
-- using Subscriber Index
-- Applicable only for Permanent SUs
-- ============================================================
rbServiceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbServiceConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table of Services."
::= { rbServices 1 }
rbServiceConfigEntry OBJECT-TYPE
SYNTAX RbServiceConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the Services Table. Includes parameters of the relevant Service."
INDEX { rbSubscriberIdx, rbServiceIdx }
::= { rbServiceConfigTable 1 }
RbServiceConfigEntry ::= SEQUENCE {
rbServiceIdx Unsigned32,
rbServiceType RainbowServiceType,
rbServiceName DisplayString,
rbServiceID Unsigned32,
rbServiceServiceTemplateIdx Unsigned32,
rbServiceServiceTemplateName DisplayString,
rbServiceServiceTemplateID Unsigned32,
rbServiceSwitchingGroupIdx Unsigned32,
rbServiceAdminStatus INTEGER,
rbServiceOperStatus INTEGER,
rbAServiceRowStatus RowStatus,
rbServiceClientSiteVLANList OCTET STRING,
rbServiceClientSiteVLANListCount Integer32,
rbServiceSuMacAddress MacAddress,
rbServiceAUSlotNumber Integer32,
rbServiceVLANHybridMode INTEGER,
rbServiceVLANClassificationMode INTEGER,
rbServiceAccessVLAN Integer32
}
rbServiceIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The index of the relevant Service Entry."
::= { rbServiceConfigEntry 1 }
rbServiceType OBJECT-TYPE
SYNTAX RainbowServiceType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Service Type is determined by the Service Template type (read-only)."
::= { rbServiceConfigEntry 2 }
rbServiceName OBJECT-TYPE
SYNTAX DisplayString ( SIZE (1..32))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Service Name - unique per subscriber. The same Service Name may be assigned to any number of Subscribers."
::= { rbServiceConfigEntry 3 }
rbServiceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Service ID assigned by the Device (DB ID) - unique per Device."
::= { rbServiceConfigEntry 4 }
rbServiceServiceTemplateIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The index of the selected entry in the Service Templates Table = selected Service Template.
When updating an existing Service, the Service Type defined in the selected Service Template
must match the one already defined for the Service."
::= { rbServiceConfigEntry 5 }
rbServiceServiceTemplateName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the selected Service Template."
::= { rbServiceConfigEntry 6 }
rbServiceServiceTemplateID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The ID of the selected Service Template."
::= { rbServiceConfigEntry 7 }
rbServiceSwitchingGroupIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Not used in current version."
::= { rbServiceConfigEntry 8 }
rbServiceAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Service Admin status. If the Admin Status is disabled, the Service will not be available to the Subscriber."
DEFVAL { enable }
::= { rbServiceConfigEntry 9 }
rbServiceOperStatus OBJECT-TYPE
SYNTAX INTEGER { up ( 1 ) , down ( 2 ) , unknown ( 3 ) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Service Operational Status"
::= { rbServiceConfigEntry 10 }
rbAServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbServiceConfigEntry 11 }
rbServiceClientSiteVLANList OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0 .. 24 ) )
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A list of up to 16 (15 if Hybrid VLAN Mode is enabled) VLAN IDs
at the Subscribers site that are used as classifiers for the Service.
An empty list means No VLAN IDs.
To prepare the list: Arrange all VLAN IDs in ascending order without gaps
using hexadecimal digits (3 hexadecimal digits/VLAN ID).
If the list contains less than 16 VLAN IDs, add null (empty) VLANs up to
a total of 48 hexadecimal digits. Convert the list to a string of 24 octets."
::= { rbServiceConfigEntry 12 }
rbServiceClientSiteVLANListCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Number of non-null VLAN IDs in the rbServiceClientSiteVLANList."
::= { rbServiceConfigEntry 13 }
rbServiceSuMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC Address of the SU associated with the Service. SU MAC Address of an existing Service can be
modified only if the Admin Status is set to disable."
::= { rbServiceConfigEntry 14 }
rbServiceAUSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The slot number of the AU serving the applicable SU. This parameter is not applicable if the SU is
served by a Micro Base Station."
::= { rbServiceConfigEntry 15 }
rbServiceVLANHybridMode OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Hybrid VLAN Mode of operation enables classification of both tagged and untagged packets
or untagged packets only, according to the following rules:
- Hybrid VLAN Mode disabled and Client Site VLAN List is not empty: Only packets tagged with
a VLAN ID that exists in the VLAN List will be forwarded. VLAN List can include up to 16 entries.
- Hybrid VLAN Mode disabled and Client Site VLAN List is empty: All (both untagged and
tagged with any VLAN ID) will be forwarded.
- Hybrid VLAN Mode enabled and Client Site VLAN List is not empty: Untagged packets,
and packets tagged with a VLAN ID that exists in the VLAN List will be forwarded.
VLAN List can include up to 15 entries.
- Hybrid VLAN Mode enabled and Client Site VLAN List is empty: Only untagged frames
will be forwarded."
DEFVAL { enable }
::= { rbServiceConfigEntry 16 }
rbServiceVLANClassificationMode OBJECT-TYPE
SYNTAX INTEGER { off ( 1 ) , on ( 2 ) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"VLAN Classification Mode.
The VLAN Classification feature enables using VLAN ID for classification of
transparent service downlink traffic before transmission to the destination MAC address.
The VLAN Classification feature supports applications where multiple VLANs are associated
with a single MAC address, allowing to assign different services to different VLANs.
VLAN Classification Mode can be set to On only if the following conditions are met:
1. The VLAN Transparency Mode of the applicable Service Profile is set to On.
2. A single VLAN ID is defined for the Service. This means that the allowed combinations are:
a) Hybrid VLAN Mode is Off and the VLAN List includes a single VLAN ID, or
b) Hybrid VLAN Mode is On and the VLAN List is empty.
All Services assigned to the same SU must be configured with the same
VLAN Classification Mode (Either On or Off)."
DEFVAL { off }
::= { rbServiceConfigEntry 17 }
rbServiceAccessVLAN OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 4095 )
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Access VLAN parameter enables defining a VLAN ID to be used with untagged packets
received on the Ethernet port of the SU. This parameter is applicable only for
a transparent service (VLAN Transparency Mode is On) with Hybrid Mode set to On,
or a transparent service with Hybrid Mode set to Off and an empty VLAN list.
A number in the range between 0 and 4094. A value of 4095 means No Access VLAN."
::= { rbServiceConfigEntry 18 }
-- ============================================================
-- Rainbow Services Configuration Table
-- Service configuration parameters for specific SU are retrieved
-- using MacAddress
-- Read-only for Temporary SUs
-- ============================================================
rbSuServiceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbSuServiceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Services by SU MAC Address."
::= { rbServices 2 }
rbSuServiceConfigEntry OBJECT-TYPE
SYNTAX RbSuServiceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Services Table. Includes parameters of the relevant Service."
INDEX { rbSuServiceMacAddress, rbSuServiceIdx }
::= { rbSuServiceConfigTable 1 }
RbSuServiceConfigEntry ::= SEQUENCE {
rbSuServiceMacAddress MacAddress,
rbSuServiceIdx Unsigned32,
rbSuServiceRbType RainbowServiceType,
rbSuServiceName DisplayString,
rbSuServiceID Unsigned32,
rbSuSubscriberIdx Unsigned32,
rbSuServiceTemplateIdx Unsigned32,
rbSuServiceTemplateName DisplayString,
rbSuServiceTemplateID Unsigned32,
rbSuServiceSwitchingGroupIdx Unsigned32,
rbSuServiceAdminStatus INTEGER,
rbSuServiceOperStatus INTEGER,
rbSuServiceClientSiteVLANList OCTET STRING,
rbSuServiceClientSiteVLANListCount Integer32,
rbSuServiceAUSlotNumber Integer32,
rbSuServiceVLANHybridMode INTEGER,
rbSuServiceVLANClassificationMode INTEGER,
rbSuServiceAccessVLAN Integer32,
rbSuServiceRowStatus RowStatus
}
rbSuServiceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC Address of the SU associated with the Service."
::= { rbSuServiceConfigEntry 1 }
rbSuServiceIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant Service Entry."
::= { rbSuServiceConfigEntry 2 }
rbSuServiceRbType OBJECT-TYPE
SYNTAX RainbowServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service Type is determined by the Service Template type (read-only)."
::= { rbSuServiceConfigEntry 3 }
rbSuServiceName OBJECT-TYPE
SYNTAX DisplayString ( SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service Name - unique per subscriber (for Permanent SUs).
The same Service Name may be assigned to any number of Subscribers."
::= { rbSuServiceConfigEntry 4 }
rbSuServiceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service ID assigned by the Device (DB ID) - unique per Device."
::= { rbSuServiceConfigEntry 5 }
rbSuSubscriberIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the selected entry in the Subscribers Table.
Not applicable for a Temporary SU."
::= { rbSuServiceConfigEntry 6 }
rbSuServiceTemplateIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the selected entry in the Service Templates Table = selected Service Template.
When updating an existing Service, the Service Type defined in the selected Service Template
must match the one already defined for the Service."
::= { rbSuServiceConfigEntry 7 }
rbSuServiceTemplateName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the selected Service Template."
::= { rbSuServiceConfigEntry 8 }
rbSuServiceTemplateID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the selected Service Template."
::= { rbSuServiceConfigEntry 9 }
rbSuServiceSwitchingGroupIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not used in current version."
::= { rbSuServiceConfigEntry 10 }
rbSuServiceAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service Admin status. If the Admin Status is disabled,
the Service will not be available to the Subscriber."
DEFVAL { enable }
::= { rbSuServiceConfigEntry 11 }
rbSuServiceOperStatus OBJECT-TYPE
SYNTAX INTEGER { up ( 1 ) , down ( 2 ) , unknown ( 3 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Operational Status."
::= { rbSuServiceConfigEntry 12 }
rbSuServiceClientSiteVLANList OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0 .. 24 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A list of up to 16 (15 if Hybrid VLAN Mode is enabled) VLAN IDs
at the Subscribers site that are used as classifiers for the Service.
An empty list means No VLAN IDs.
To prepare the list: Arrange all VLAN IDs in ascending order without gaps
using hexadecimal digits (3 hexadecimal digits/VLAN ID).
If the list contains less than 16 VLAN IDs, add null (empty) VLANs up to
a total of 48 hexadecimal digits. Convert the list to a string of 24 octets."
::= { rbSuServiceConfigEntry 13 }
rbSuServiceClientSiteVLANListCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of non-null VLAN IDs in the rbServiceClientSiteVLANList."
::= { rbSuServiceConfigEntry 14 }
rbSuServiceAUSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot number of the AU serving the applicable SU.
This parameter is not applicable if the SU is served by a Micro Base Station."
::= { rbSuServiceConfigEntry 15 }
rbSuServiceVLANHybridMode OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hybrid VLAN Mode of operation enables classification of both tagged and untagged packets
or untagged packets only, according to the following rules:
- Hybrid VLAN Mode disabled and Client Site VLAN List is not empty: Only packets tagged with
a VLAN ID that exists in the VLAN List will be forwarded. VLAN List can include up to 16 entries.
- Hybrid VLAN Mode disabled and Client Site VLAN List is empty: All (both untagged and
tagged with any VLAN ID) will be forwarded.
- Hybrid VLAN Mode enabled and Client Site VLAN List is not empty: Untagged packets,
and packets tagged with a VLAN ID that exists in the VLAN List will be forwarded.
VLAN List can include up to 15 entries.
- Hybrid VLAN Mode enabled and Client Site VLAN List is empty: Only untagged frames
will be forwarded."
DEFVAL { enable }
::= { rbSuServiceConfigEntry 16 }
rbSuServiceVLANClassificationMode OBJECT-TYPE
SYNTAX INTEGER { off ( 1 ) , on ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Classification Mode.
The VLAN Classification feature enables using VLAN ID for classification of
transparent service downlink traffic before transmission to the destination MAC address.
The VLAN Classification feature supports applications where multiple VLANs are associated
with a single MAC address, allowing to assign different services to different VLANs.
VLAN Classification Mode can be set to On only if the following conditions are met:
1. The VLAN Transparency Mode of the applicable Service Profile is set to On.
2. A single VLAN ID is defined for the Service. This means that the allowed combinations are:
a) Hybrid VLAN Mode is Off and the VLAN List includes a single VLAN ID, or
b) Hybrid VLAN Mode is On and the VLAN List is empty.
All Services assigned to the same SU must be configured with the same
VLAN Classification Mode (Either On or Off)."
DEFVAL { off }
::= { rbSuServiceConfigEntry 17 }
rbSuServiceAccessVLAN OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 4095 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Access VLAN parameter enables defining a VLAN ID to be used with untagged packets
received on the Ethernet port of the SU. This parameter is applicable only for
a transparent service (VLAN Transparency Mode is On) with Hybrid Mode set to On,
or a transparent service with Hybrid Mode set to Off and an empty VLAN list.
A number in the range between 0 and 4094. A value of 4095 means No Access VLAN."
::= { rbSuServiceConfigEntry 18 }
rbSuServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbSuServiceConfigEntry 19 }
-- ============================================================
-- Rainbow Services Mapping Table
-- MacAddress for specific SU is retrieved using SU's name
-- ============================================================
rbSuMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbSuMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of SUs MacAddress registered in the system."
::= { rbServices 3 }
rbSuMappingEntry OBJECT-TYPE
SYNTAX RbSuMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Mapping Table."
INDEX { rbSuMappingSysName }
::= { rbSuMappingTable 1 }
RbSuMappingEntry ::= SEQUENCE {
rbSuMappingSysName DisplayString,
rbSuMappingMacAddress MacAddress
}
rbSuMappingSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SU's name (User Name in SUs operating in Advanced Si mode).
For the table having string as index the corresponding SNMP object key
must have as the count of components the following:
- 1st ULONG is destined for length of the string;
- next number of ULONGs is destined for ascii value of each character in the string.
To enable correct alphanumeric sorting of the rbSuMappingTable,
the rbSuMappingSysName key should have the same first component and it should be 32 -
the max rbSuMappingSysName key length. GUI appliccation have to make sure
32 will be the first component in the string and string will be ended by '\0'"
::= { rbSuMappingEntry 1 }
rbSuMappingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the SU associated with the SU's name (User Name)."
::= { rbSuMappingEntry 2 }
-- ============================================================
-- Rainbow QoS Profile Configuration Table
-- ============================================================
rbQoSProfileConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbQoSProfileConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of QoS Profiles."
::= { rbQoSProfiles 1 }
rbQoSProfileConfigEntry OBJECT-TYPE
SYNTAX RbQoSProfileConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the QoS Profiles Table. Includes parameters of the relevant QoS Profile."
INDEX { rbQoSProfileIdx }
::= { rbQoSProfileConfigTable 1 }
RbQoSProfileConfigEntry ::= SEQUENCE {
rbQoSProfileIdx Unsigned32,
rbQoSProfileName DisplayString,
rbQoSProfileID Unsigned32,
rbQoSProfileType INTEGER,
rbQoSProfileParam1 Unsigned32,
rbQoSProfileParam2 Unsigned32,
rbQoSProfileParamTime INTEGER,
rbAQoSProfileRowStatus RowStatus,
rbQoSProfileClass INTEGER
}
rbQoSProfileIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant QoS Profile Entry."
::= { rbQoSProfileConfigEntry 1 }
rbQoSProfileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 32 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"QoS Profile Name - unique per Device."
::= { rbQoSProfileConfigEntry 2 }
rbQoSProfileID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS Profile ID assigned by the Device - unique per Device."
::= { rbQoSProfileConfigEntry 3 }
rbQoSProfileType OBJECT-TYPE
SYNTAX INTEGER { rbCG (0), rbRT ( 1 ) , rbNRT ( 2 ) , rbBE ( 3 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The QoS Profile Type:
CG - (Continuing Grant) service is tailored for carrying constant bit-rate (CBR) real-time services characterized by fixed size data packets on a periodic basis such as VoIP or E1/T1.
RT (Real-Time) polling service is designed to meet the needs of Real Time Variable Bit Rate like services characterized by requirements for guaranteed rate and delay such as streaming video or audio.
NRT (Non-Real-Time) polling service is designed to meet the needs of Non Real Time Variable Bit Rate services, such as file transfer and Internet access,
that are characterized by requirement for a guaranteed rate, but can tolerate longer delays and are rather insensitive to jitter.
BE (Best Effort) service is for services where neither throughput nor delay guarantees are provided."
::= { rbQoSProfileConfigEntry 4 }
rbQoSProfileParam1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For QOS Profile type RT-VR or NRT-VR, this parameter is CIR (1-12000 in Kbps).
For QoS Profile type CG this parameter is the Packet Size (64-1550 in bytes including 4 bytes CRC and 4 bytes VLAN tag).
For QoS Profile type BE this parameter is not applicable."
::= { rbQoSProfileConfigEntry 5 }
rbQoSProfileParam2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For QOS Profile type BE or NRT-VR, this parameter is MIR (1-12000 in Kbps).
For QoS Profile type CG this parameter is the Sample Interval (5-100 in milliseconds in steps of 5).
For QoS Profile type RT-VR this parameter is not applicable."
::= { rbQoSProfileConfigEntry 6 }
rbQoSProfileParamTime OBJECT-TYPE
SYNTAX INTEGER { short ( 1 ) , medium ( 2 ) , long ( 3 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CT (Committed Time) parameter defines the time window over which the information rate is averaged to ensure compliance with the CIR or MIR parameter.
This parameter is not applicable for QoS Profile Type CG."
::= { rbQoSProfileConfigEntry 7 }
rbAQoSProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbQoSProfileConfigEntry 8 }
rbQoSProfileClass OBJECT-TYPE
SYNTAX INTEGER { local ( 1 ) , global ( 2 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QoS Profile Class: Local definition or Global (Managed) definition using an XML File.
In a Global QoS Profile all parameters become read-only."
::= { rbQoSProfileConfigEntry 9 }
-- ============================================================
-- Rainbow Policy Rules config Table
-- ============================================================
rbPolicyRuleConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbPolicyRuleConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of Policy rules."
::= { rbPolicyRules 1 }
rbPolicyRuleConfigEntry OBJECT-TYPE
SYNTAX RbPolicyRuleConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Policy Rules Table. Includes parameters of the relevant Policy Rule."
INDEX { rbPolicyRuleIdx }
::= { rbPolicyRuleConfigTable 1 }
RbPolicyRuleConfigEntry ::= SEQUENCE {
rbPolicyRuleIdx Unsigned32,
rbPolicyRuleName DisplayString,
rbPolicyRuleID Unsigned32,
rbPolicyRulePriorityType INTEGER,
rbPolicyRuleUpQoSProfileIdx1 Unsigned32,
rbPolicyRuleUpQoSUpperLimit1 Unsigned32,
rbPolicyRuleUpQoSProfileIdx2 Unsigned32,
rbPolicyRuleUpQoSUpperLimit2 Unsigned32,
rbPolicyRuleUpQoSProfileIdx3 Unsigned32,
rbPolicyRuleUpQoSUpperLimit3 Unsigned32,
rbPolicyRuleUpQoSProfileIdx4 Unsigned32,
rbPolicyRuleUpQoSUpperLimit4 Unsigned32,
rbPolicyRuleDownQoSProfileIdx1 Unsigned32,
rbPolicyRuleDownQoSUpperLimit1 Unsigned32,
rbPolicyRuleDownQoSProfileIdx2 Unsigned32,
rbPolicyRuleDownQoSUpperLimit2 Unsigned32,
rbPolicyRuleDownQoSProfileIdx3 Unsigned32,
rbPolicyRuleDownQoSUpperLimit3 Unsigned32,
rbPolicyRuleDownQoSProfileIdx4 Unsigned32,
rbPolicyRuleDownQoSUpperLimit4 Unsigned32,
rbAPolicyRuleRowStatus RowStatus,
rbPolicyRuleClass INTEGER
}
rbPolicyRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant Policy Rule Entry."
::= { rbPolicyRuleConfigEntry 1 }
rbPolicyRuleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policy Rule Name - unique per Device"
::= { rbPolicyRuleConfigEntry 2 }
rbPolicyRuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Policy Rule ID assigned by the Device (DB ID) - unique per Device."
::= { rbPolicyRuleConfigEntry 3 }
rbPolicyRulePriorityType OBJECT-TYPE
SYNTAX INTEGER { rbDSCP ( 1 ) , rb8021p ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prioritization mechanism used by the Policy Rule: DSCP or 802.1p."
::= { rbPolicyRuleConfigEntry 4 }
rbPolicyRuleUpQoSProfileIdx1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 1."
::= { rbPolicyRuleConfigEntry 6 }
rbPolicyRuleUpQoSUpperLimit1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Uplink Range 1."
::= { rbPolicyRuleConfigEntry 7 }
rbPolicyRuleUpQoSProfileIdx2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 2."
::= { rbPolicyRuleConfigEntry 9 }
rbPolicyRuleUpQoSUpperLimit2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Uplink Range 2."
::= { rbPolicyRuleConfigEntry 10 }
rbPolicyRuleUpQoSProfileIdx3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 3."
::= { rbPolicyRuleConfigEntry 12 }
rbPolicyRuleUpQoSUpperLimit3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Uplink Range 3."
::= { rbPolicyRuleConfigEntry 13 }
rbPolicyRuleUpQoSProfileIdx4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 4."
::= { rbPolicyRuleConfigEntry 15 }
rbPolicyRuleUpQoSUpperLimit4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Uplink Range 4."
::= { rbPolicyRuleConfigEntry 16 }
rbPolicyRuleDownQoSProfileIdx1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 1."
::= { rbPolicyRuleConfigEntry 18 }
rbPolicyRuleDownQoSUpperLimit1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Downlink Range 1."
::= { rbPolicyRuleConfigEntry 19 }
rbPolicyRuleDownQoSProfileIdx2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 2."
::= { rbPolicyRuleConfigEntry 21 }
rbPolicyRuleDownQoSUpperLimit2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Downlink Range 2."
::= { rbPolicyRuleConfigEntry 22 }
rbPolicyRuleDownQoSProfileIdx3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 3."
::= { rbPolicyRuleConfigEntry 24 }
rbPolicyRuleDownQoSUpperLimit3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Downlink Range 3."
::= { rbPolicyRuleConfigEntry 25 }
rbPolicyRuleDownQoSProfileIdx4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 4."
::= { rbPolicyRuleConfigEntry 27 }
rbPolicyRuleDownQoSUpperLimit4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit for Downlink Range 4."
::= { rbPolicyRuleConfigEntry 28 }
rbAPolicyRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbPolicyRuleConfigEntry 29 }
rbPolicyRuleClass OBJECT-TYPE
SYNTAX INTEGER { local ( 1 ) , global ( 2 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policy Rule Class: Local definition or Global (Managed) definition using an XML File.
In a Global Policy Rule all parameters become read-only."
::= { rbPolicyRuleConfigEntry 30 }
-- ============================================================
-- Forwarding Rule Config Table
-- ============================================================
rbForwardingRuleConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbForwardingRuleConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Forwarding Rules."
::= { rbForwardingRules 2 }
rbForwardingRuleConfigEntry OBJECT-TYPE
SYNTAX RbForwardingRuleConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Forwarding Rules Table. Includes parameters of the relevant Forwarding Rule."
INDEX { rbForwardingRuleType ,rbForwardingRuleIdx }
::= { rbForwardingRuleConfigTable 1 }
RbForwardingRuleConfigEntry ::= SEQUENCE {
rbForwardingRuleType RainbowServiceType,
rbForwardingRuleIdx Unsigned32,
rbForwardingRuleName DisplayString,
rbForwardingRuleID Unsigned32,
rbForwardingRuleUnicastRelaying INTEGER,
rbForwardingRuleMulticastRelaying INTEGER,
rbForwardingUnknownAddrPolicy INTEGER,
rbForwardingRuleMulticastVLAN Integer32,
rbForwardingRuleMulticastQoSIdx Unsigned32,
rbAForwardingRuleRowStatus RowStatus,
rbForwardingRuleClass INTEGER
}
rbForwardingRuleType OBJECT-TYPE
SYNTAX RainbowServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service Type of the Forwarding Rule.
The Service Type can be set only for a new Forwarding Rule (write-once). The Service Template Type of
an existing Forwarding Rule cannot be changed (read-only)."
::= { rbForwardingRuleConfigEntry 1 }
rbForwardingRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant Forwarding Rule Entry."
::= { rbForwardingRuleConfigEntry 2 }
rbForwardingRuleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forwarding Rule name - unique per Device."
::= { rbForwardingRuleConfigEntry 3 }
rbForwardingRuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Forwarding Rule ID assigned by the Device (DB ID) - unique per Device."
::= { rbForwardingRuleConfigEntry 4 }
rbForwardingRuleUnicastRelaying OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Applicable only to Layer II and VoIP Service Types (not applicable to PPPoE Service Type). Unicast Relaying
enable/disable. When the Unicast Relaying parameter is enabled, unicast packets originating from devices on the
wireless link can be transmitted back to the wireless link devices. If disabled, these packets are not sent to
the wireless link even if they are intended for devices on the wireless link. "
::= { rbForwardingRuleConfigEntry 6 }
rbForwardingRuleMulticastRelaying OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Applicable only to Layer II and VoIP Service Types (not applicable to PPPoE Service Type). Multicast Relaying
enable/disable. When the Broadcast Relaying parameter is enabled, broadcast packets originating from devices on the
wireless link are transmitted by the AU back to the wireless link devices, as well as to the backbone. If disabled,
these packets are sent only to the backbone and are not sent back to the wireless link."
::= { rbForwardingRuleConfigEntry 7 }
rbForwardingUnknownAddrPolicy OBJECT-TYPE
SYNTAX INTEGER { reject ( 1 ) , forward ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Applicable only to Layer II and VoIP Service Types (not applicable to PPPoE Service Type).
Unknown Address Forwarding Policy:
Reject: The AU/Micro Base Station will transmit packets only to those addresses that the AU knows to exist on the
wireless link side.
Forward: Enables the transmission of all packets, except those sent to addresses that the AU/Micro Base Station
recognizes as being on its wired backbone side."
::= { rbForwardingRuleConfigEntry 8 }
rbForwardingRuleMulticastVLAN OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 4096 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Applicable only to support services to an SU with SW version below 2.0.
The VLAN ID to be attached to mulicast messages in the downlink in order
to enable full support of the VLAN feature. A number in the range between 0 and 4094.
A value of 4095 means No Multicast VLAN. A value of 4096 is reserved only for Transparent Forwarding Rule."
::= { rbForwardingRuleConfigEntry 9 }
rbForwardingRuleMulticastQoSIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index in the QoS Profiles Table of the QoS Profile to be used for broadcasts and multicasts in the downlink."
::= { rbForwardingRuleConfigEntry 10 }
rbAForwardingRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbForwardingRuleConfigEntry 11 }
rbForwardingRuleClass OBJECT-TYPE
SYNTAX INTEGER { local ( 1 ) , global ( 2 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forwarding Rule Class: Local definition or Global (Managed) definition using an XML File.
In a Global Forwarding Rule all parameters become read-only."
::= { rbForwardingRuleConfigEntry 12 }
-- ============================================================
-- Service Filtering System Tables
-- ============================================================
rbL2FilteringRules OBJECT IDENTIFIER
::= { rbFilteringSystem 1 }
rbL2FilteringRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbL2FilteringRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of rules for L2 filters."
::= { rbL2FilteringRules 1 }
rbL2FilteringRuleEntry OBJECT-TYPE
SYNTAX RbL2FilteringRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the L2 Filtering Rules Table. Includes parameters of the relevant L2 Rule."
INDEX { rbL2FilteringRuleIdx }
::= { rbL2FilteringRuleTable 1 }
RbL2FilteringRuleEntry ::= SEQUENCE {
rbL2FilteringRuleIdx Unsigned32,
rbL2FilteringRuleRowStatus RowStatus,
rbL2FilteringRuleName DisplayString,
rbL2FilteringRuleSrcMacAddress MacAddress,
rbL2FilteringRuleSrcMask MacAddress,
rbL2FilteringRuleDestMacAddress MacAddress,
rbL2FilteringRuleDestMask MacAddress,
rbL2FilteringRuleEthType Integer32
}
rbL2FilteringRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the L2 Filtering Rule Entry."
::= { rbL2FilteringRuleEntry 1 }
rbL2FilteringRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of table rows (update is not available).
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbL2FilteringRuleEntry 2 }
rbL2FilteringRuleName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 32 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 Filtering Rule name - unique per Device."
::= { rbL2FilteringRuleEntry 3 }
rbL2FilteringRuleSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 Filtering Rule Source MAC Address. 00-00-00-00-00-00 means ANY MAC address. If the Source MAC Address is specified,
then the Destination MAC Address must be ANY, and vice versa. Both Source and Destination MAC Addresses may be ANY."
::= { rbL2FilteringRuleEntry 4 }
rbL2FilteringRuleSrcMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 Filtering Rule Source MAC Address Mask. FF-FF-FF-FF-FF-FF means NO Mask.
If the Source MAC Address is ANY, the Mask is not applicable.
For the Micro Base Station the Mask is not applicable."
::= { rbL2FilteringRuleEntry 5 }
rbL2FilteringRuleDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 Filtering Rule Destination MAC Address. 00-00-00-00-00-00 means ANY MAC address. If the Source MAC Address is specified,
then the Destination MAC Address must be ANY, and vice versa. Both Source and Destination MAC Addresses may be ANY."
::= { rbL2FilteringRuleEntry 6 }
rbL2FilteringRuleDestMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 Filtering Rule Destination MAC Address Mask. FF-FF-FF-FF-FF-FF means NO Mask.
If the Source MAC Address is ANY, the Mask is not applicable.
For the Micro Base Station the Mask is not applicable."
::= { rbL2FilteringRuleEntry 7 }
rbL2FilteringRuleEthType OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L2 Filtering Rule Ethernet type. The range is from 0 to 65535. 0 means ANY Ethertype."
::= { rbL2FilteringRuleEntry 8 }
-- ============================================================
rbL34FilteringRules OBJECT IDENTIFIER
::= { rbFilteringSystem 2 }
rbL34FilteringRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbL34FilteringRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of rules for L3/L4 filters."
::= { rbL34FilteringRules 1 }
rbL34FilteringRuleEntry OBJECT-TYPE
SYNTAX RbL34FilteringRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the L3/L4 Filtering Rules Table. Includes parameters of the relevant L3/L4 Rule."
INDEX { rbL34FilteringRuleIdx }
::= { rbL34FilteringRuleTable 1 }
RbL34FilteringRuleEntry ::= SEQUENCE {
rbL34FilteringRuleIdx Unsigned32,
rbL34FilteringRuleRowStatus RowStatus,
rbL34FilteringRuleName DisplayString,
rbL34FilteringRuleSrcIpAddress IpAddress,
rbL34FilteringRuleSrcMask IpAddress,
rbL34FilteringRuleDestIpAddress IpAddress,
rbL34FilteringRuleDestMask IpAddress,
rbL34FilteringRuleIpProtocol Integer32,
rbL34FilteringRuleSrcUdpTcpPort Integer32,
rbL34FilteringRuleDestUdpTcpPort Integer32
}
rbL34FilteringRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the L3/L4 Filtering Rule Entry."
::= { rbL34FilteringRuleEntry 1 }
rbL34FilteringRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of table rows (update is not available).
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbL34FilteringRuleEntry 2 }
rbL34FilteringRuleName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 32 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3/L4 Filtering Rule name - unique per Device."
::= { rbL34FilteringRuleEntry 3 }
rbL34FilteringRuleSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3/L4 Filtering Rule Source IP Address. 254.255.255.255 means ANY IP address. If the Source IP Address is specified,
then the Destination IP Address must be ANY, and vice versa. Both Source and Destination IP Addresses
may be ANY. A combination where both Source and Destination IP Addresses, both Source and Destination
UDP/TCP Ports, and IP Protocol are defined as ANY, is not allowed."
::= { rbL34FilteringRuleEntry 4 }
rbL34FilteringRuleSrcMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3/L4 Filtering Rule Source Mask. 255.255.255.255 means NO Mask.
If the Source IP Address is ANY, the Mask is not applicable.
For the Micro Base Station the Mask is not applicable."
::= { rbL34FilteringRuleEntry 5 }
rbL34FilteringRuleDestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3/L4 Filtering Rule Destination IP Address. 254.255.255.255 means ANY IP address. If the Source IP Address is specified,
then the Destination IP Address must be ANY, and vice versa. Both Source and Destination IP Addresses
may be ANY. A combination where both Source and Destination IP Addresses, both Source and Destination
UDP/TCP Ports, and IP Protocol are defined as ANY, is not allowed."
::= { rbL34FilteringRuleEntry 6 }
rbL34FilteringRuleDestMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3/L4 Filtering Rule Destination Mask. 255.255.255.255 means NO Mask.
If the Source IP Address is ANY, the Mask is not applicable.
For the Micro Base Station the Mask is not applicable."
::= { rbL34FilteringRuleEntry 7 }
rbL34FilteringRuleIpProtocol OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 255 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3/L4 Filtering Rule Defined IP Protocol. The range is from 0 to 255. 255 means ANY protocol."
::= { rbL34FilteringRuleEntry 8 }
rbL34FilteringRuleSrcUdpTcpPort OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3, L4 Filtering Rule Source UDP/TCP Port. 65535 means ANY Port. Each L3/L4 Filtering Rule must include
either a Source or a Destination Port. If the Source Port is specified, then the Destination Port must
be ANY, and vice versa. Both Source and Destination UDP/TCP Ports may be ANY."
::= { rbL34FilteringRuleEntry 9 }
rbL34FilteringRuleDestUdpTcpPort OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3, L4 Filtering Rule Destination UDP/TCP Port. 65535 means ANY Port. Each L3/L4 Filtering Rule must include
either a Source or a Destination Port. If the Source Port is specified, then the Destination Port must be ANY,
and vice versa. Both Source and Destination UDP/TCP Ports may be ANY."
::= { rbL34FilteringRuleEntry 10 }
-- ============================================================
rbInterfaceFiltering OBJECT IDENTIFIER
::= { rbFilteringSystem 3 }
rbInterfaceFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbInterfaceFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of Filtering parameters per Interface. This is a static table with two entries."
::= { rbInterfaceFiltering 1 }
rbInterfaceFilteringEntry OBJECT-TYPE
SYNTAX RbInterfaceFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Interface Filtering Table. Includes Filtering parameters of the relevant Interface."
INDEX { rbInterfaceFilteringType, rbInterfaceFilteringIdx }
::= { rbInterfaceFilteringTable 1 }
RbInterfaceFilteringEntry ::= SEQUENCE {
rbInterfaceFilteringType INTEGER,
rbInterfaceFilteringIdx Unsigned32,
rbInterfaceFilteringName DisplayString,
rbInterfaceFilteringAdminStatus INTEGER,
rbInterfaceFilteringActiveFilterType INTEGER,
rbInterfaceFilteringAction INTEGER,
rbInterfaceFilteringDeleteAllFilteringRules INTEGER,
rbInterfaceFilteringResetAllFilteringCounters INTEGER,
rbInterfaceFilteringNonMatchingPacketsCounter Counter32
}
rbInterfaceFilteringType OBJECT-TYPE
SYNTAX INTEGER { fromWireless ( 1 ) , fromNetwork ( 2 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Filtering Type."
::= { rbInterfaceFilteringEntry 1 }
rbInterfaceFilteringIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Entry."
::= { rbInterfaceFilteringEntry 2 }
rbInterfaceFilteringName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 32 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Filtering name - unique per Device. Read-only in the current version.
The read-only names are From Wireless (Idx 1) and From Network (Idx 2)."
::= { rbInterfaceFilteringEntry 3 }
rbInterfaceFilteringAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable ( 1 ) , disable ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Filtering Admin Status."
::= { rbInterfaceFilteringEntry 4 }
rbInterfaceFilteringActiveFilterType OBJECT-TYPE
SYNTAX INTEGER { filterL2 ( 1 ) , filterL34 ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Filtering Active Filter Type."
::= { rbInterfaceFilteringEntry 5 }
rbInterfaceFilteringAction OBJECT-TYPE
SYNTAX INTEGER { deny ( 1 ) , allow ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Filtering Action."
::= { rbInterfaceFilteringEntry 6 }
rbInterfaceFilteringDeleteAllFilteringRules OBJECT-TYPE
SYNTAX INTEGER { doNothing ( 0 ) , deleteAllRules ( 1 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to delete all Filtering Rules defined for the Interface Filtering. Filtering Rules per Interface
are defined using the Filters Table."
::= { rbInterfaceFilteringEntry 7 }
rbInterfaceFilteringResetAllFilteringCounters OBJECT-TYPE
SYNTAX INTEGER { doNothing ( 0 ) , resetCounters ( 1 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to reset all Filtering Counters of the Interface Filtering, including the Non Matching Packets Counters."
::= { rbInterfaceFilteringEntry 8 }
rbInterfaceFilteringNonMatchingPacketsCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter for the Non Matching Packets (per interface)."
::= { rbInterfaceFilteringEntry 9 }
-- ============================================================
rbFilters OBJECT IDENTIFIER
::= { rbFilteringSystem 4 }
rbFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of filters."
::= { rbFilters 1 }
rbFilterEntry OBJECT-TYPE
SYNTAX RbFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Filter Table."
INDEX { rbInterfaceFilteringIdx, rbFilterRuleType, rbFilterRuleIndex }
::= { rbFilterTable 1 }
RbFilterEntry ::= SEQUENCE {
rbFilterRuleType INTEGER,
rbFilterRuleIndex Unsigned32,
rbFilterRowStatus RowStatus
}
rbFilterRuleType OBJECT-TYPE
SYNTAX INTEGER { filterL2 ( 1 ) , filterL34 ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of the relevant Filtering Rule."
::= { rbFilterEntry 1 }
rbFilterRuleIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the Filtering Rule in the relevant Filtering Rules Table. Serves also as an index of the entry."
::= { rbFilterEntry 2 }
rbFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of table rows (update is not available).
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbFilterEntry 3 }
-- ============================================================
rbFilterCounters OBJECT IDENTIFIER
::= { rbFilteringSystem 5 }
rbFilteringCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbFilteringCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of Filtering Counters. Counters are available per Interface Filtering and Filtering Rule."
::= { rbFilterCounters 1 }
rbFilteringCounterEntry OBJECT-TYPE
SYNTAX RbFilteringCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Filtering Counter Table. Includes parameters of the relevant Filtering Rule."
INDEX { rbInterfaceFilteringIdx, rbInterfaceFilteringActiveFilterType, rbCountRuleIdx }
::= { rbFilteringCounterTable 1 }
RbFilteringCounterEntry ::= SEQUENCE {
rbCountRuleIdx Unsigned32,
rbResetCounter INTEGER,
rbRuleMatchCount Counter32
}
rbCountRuleIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Filtering Rule in the relevant Filtering Rules Table."
::= { rbFilteringCounterEntry 1 }
rbResetCounter OBJECT-TYPE
SYNTAX INTEGER { doNothing ( 0 ) , resetCounter ( 1 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to reset the Interface Filtering Rule Counter."
::= { rbFilteringCounterEntry 2 }
rbRuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that matched the Filtering Rule."
::= { rbFilteringCounterEntry 3 }
-- ============================================================
rbMACAddressDenyList OBJECT IDENTIFIER
::= { rbFilteringSystem 6 }
rbMACAddressDenyListCounters OBJECT IDENTIFIER
::= { rbMACAddressDenyList 1 }
rbDenyListCounterReset OBJECT-TYPE
SYNTAX INTEGER { doNothing ( 0 ) , resetCounter ( 1 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to reset the MAC Address Deny List Counter."
::= { rbMACAddressDenyListCounters 1 }
rbDenyListWirelessPacketCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address Deny List Counter from Wireless Interface.
Counts the packets that were rejected because either the source or
destination MAC Address is included in the MAC Address Deny List."
::= { rbMACAddressDenyListCounters 2 }
rbDenyListNetworkPacketCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address Deny List Counter from Network Interface.
Counts the packets that were rejected because either the source or
destination MAC Address is included in the MAC Address Deny List."
::= { rbMACAddressDenyListCounters 3 }
rbMACAddressDenyListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbMACAddressDenyListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC Address Deny List Table."
::= { rbMACAddressDenyList 2 }
rbMACAddressDenyListEntry OBJECT-TYPE
SYNTAX RbMACAddressDenyListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MAC Address Deny List Table. Packets whose source or destination is included in the MAC Address Deny List will be rejected."
INDEX { rbMACAddressDenyMacAddress }
::= { rbMACAddressDenyListTable 1 }
RbMACAddressDenyListEntry ::= SEQUENCE {
rbMACAddressDenyMacAddress MacAddress,
rbMACAddressDenyListRowStatus RowStatus
}
rbMACAddressDenyMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC Address of the entry in the MAC Address Deny List Table."
::= { rbMACAddressDenyListEntry 1 }
rbMACAddressDenyListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and relevant parameters
may be modified;
createAndGo (4) is used for creating a new entry and to have its status automatically set to active;
destroy (6) is used for deleting an existing entry."
::= { rbMACAddressDenyListEntry 2 }
-- ============================================================
-- Service General Parameters
-- ============================================================
rbGetNewPolicyRuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the Policy Rules Table."
::= { rbServiceGeneralConfig 1 }
rbGetNewServiceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the Service Table."
::= { rbServiceGeneralConfig 2 }
rbGetNewServiceTemplateID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the Service Template Table."
::= { rbServiceGeneralConfig 3 }
rbGetNewSubscriberID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the Subscriber Table."
::= { rbServiceGeneralConfig 4 }
rbGetNewQoSProfileID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the QoS Profile Table."
::= { rbServiceGeneralConfig 5 }
rbGetNewForwardingRuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the Forwarding Rules Table."
::= { rbServiceGeneralConfig 6 }
rbServiceWorkingMode OBJECT-TYPE
SYNTAX INTEGER { professionalMode ( 1 ) , lightMode ( 2 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service Mode:
Professional (Advanced) Mode enables denial of services to SUs operating
in Standard mode that are not defined in the Device.
An SU operating in Standard mode must be defined in the Device before it can be registered
and receive any service.
An SU operating in Advanced Si mode will be authenticated and provisioned (or rejected)
by the RADIUS Server.
In Light (Quick) Mode, an undefined SU operating in Standard mode will be added
to the database as Temporary and the subscriber will be able to use only services
based on the Default Service Template(s).
An undefined SU operating in Advanced Si mode will be added to the database and provisioned
with services based on the Default Service Template(s) only if its Password is
either quickynikynyoky or blank."
DEFVAL { lightMode }
::= { rbServiceGeneralConfig 7 }
rbDfltServiceTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbDfltServiceTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of Default Service Templates that are used by the Device to provide Default Services.
The table can hold up to two Default Service Templates.
It can hold one Service Template of any Service Type (Layer II or PPPoE or VoIP).
It can hold two Service Templates, but only the following combinations are allowed:
a. One PPPoE and one Layer II Service Templates.
b. One PPPoE and one VoIP Service Templates."
::= { rbServiceGeneralConfig 8 }
rbDfltServiceTemplateEntry OBJECT-TYPE
SYNTAX RbDfltServiceTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Default Service Templates Table.
Includes parameters of the relevant Default Service Template."
INDEX { rbDfltServiceTemplateType }
::= { rbDfltServiceTemplateTable 1 }
RbDfltServiceTemplateEntry ::= SEQUENCE {
rbDfltServiceTemplateType RainbowServiceType,
rbDfltServiceTemplateIdx Unsigned32
}
rbDfltServiceTemplateType OBJECT-TYPE
SYNTAX RainbowServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the Service Template identified by the rbDflteServiceTemplateIdx. Read-only.
It also serves as the index of the table."
::= { rbDfltServiceTemplateEntry 1 }
rbDfltServiceTemplateIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the selected Service Template Entry in the Service Templates Table."
::= { rbDfltServiceTemplateEntry 2 }
-- ============================================================
-- Filter General Parameters
-- ============================================================
rbFilterGeneralConfig OBJECT IDENTIFIER
::= { rbFilteringSystem 7 }
rbGetNewL2FilterRuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the L2 filter Rules Table."
::= { rbFilterGeneralConfig 1 }
rbGetNewL34FilterRuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to get from Device the next free index for the L34 filter Rules Table."
::= { rbFilterGeneralConfig 2 }
-- ============================================================
-- Rainbow XML Error Table
-- ============================================================
rbXmlErrorReportTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbXmlErrorReportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of XML Error Reports."
::= { rbXmlErrorReport 1 }
rbXmlErrorReportEntry OBJECT-TYPE
SYNTAX RbXmlErrorReportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the XML Error Table. Includes Errors that encountered while parsing an XML file."
INDEX { rbXmlErrorIdx }
::= { rbXmlErrorReportTable 1 }
RbXmlErrorReportEntry ::= SEQUENCE {
rbXmlErrorIdx Integer32,
rbXmlFolderType INTEGER,
rbXmlElementType INTEGER,
rbXmlErrorType INTEGER,
rbXmlFileLineNumber Integer32
}
rbXmlErrorIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the relevant Entry."
::= { rbXmlErrorReportEntry 1 }
rbXmlFolderType OBJECT-TYPE
SYNTAX INTEGER { undefined (0), serviceProfiles ( 1 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the folder reported by the row."
::= { rbXmlErrorReportEntry 2 }
rbXmlElementType OBJECT-TYPE
SYNTAX INTEGER {
undefined (0),
qosProfile ( 1 ) ,
forwardingRule ( 2 ) ,
priorityClassifier ( 3 ) ,
serviceProfile ( 4 )
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the element reported by the row."
::= { rbXmlErrorReportEntry 3 }
rbXmlErrorType OBJECT-TYPE
SYNTAX INTEGER {
-- DBQ Related Errors
noError ( 0 ), -- No error
illegalTableId ( 1 ), -- Illegal table ID
deleteSuFailure ( 2 ), -- Can't delete a registered SU
oneL2fwrulePerVpl ( 3 ), -- Only one L2 or one Voice and/or one PPPoE Forwarding Rules are permitted for the same VPLID
sameServiceTypeOnVlan ( 4 ), -- Can't create 2 services with either the same type of service, or L2 and Voice serviced on the same VLAN
dbAddFailure ( 5 ), -- Data base add record error
dbUpdateFailure ( 6 ), -- Data base update record error
dbDeleteFailure ( 7 ), -- Data base delete record error
keyMissing ( 8 ), -- Missing key in added record
addedRecordAlreadyExists ( 9 ), -- Added record already exists
addSmRecNeeded ( 10 ), -- Missing record in SM table
addSuRecNeeded ( 11 ), -- Missing record in SU table
addPipeRecNeeded ( 12 ), -- Missing/undeclared Service
addPriorityClassRecNeeded ( 13 ), -- Missing/undeclared Priority Classifier
addFwRulesRecNeeded ( 14 ), -- Missing/undeclared Forwarding Rule
addIpAddrsRulesRecNeeded ( 15 ), -- Missing/undeclared IP Addressing Rule
addProfileRecNeeded ( 16 ), -- Missing/undeclared Service Profile
addSubscriberRecNeeded ( 17 ), -- Missing/undeclared Subscriber
addVlanListNeeded ( 18 ), -- Missing/undeclared VLAN List
addQosRecNeeded ( 19 ), -- Missing/undeclared QoS Profile
updatedRecordNotExists ( 20 ), -- Updated record does not exist
deletedRecordNotExists ( 21 ), -- Deleted record does not exist
deletePipeRecNeeded ( 22 ), -- Delete service record first
deleteProfileRecNeeded ( 23 ), -- Delete Service Profile record first
deleteFwRulesRecNeeded ( 24 ), -- Delete Forwarding Rules record first
deletePriorityRecNeeded ( 25 ), -- Delete Priority Classification record first
deleteDefaultProfileNeeded ( 26 ), -- Delete Default Service Profile first
deletePriorityDefDscpRecNeeded ( 27 ), -- Missing DSCP record in Priority Classification table
wrongPriorityType ( 28 ), -- Wrong priority type
wrongUpPriorityRanges ( 29 ), -- Wrong Priority Classification up link range
wrongDnPriorityRanges ( 30 ), -- Wrong Priority Classification down link range
addTooManyConnections ( 31 ), -- Too many connections for this Priority Classification
serviceHandling ( 32 ), -- Error while handling Service
illeagalTranstype ( 33 ), -- Illegal transaction type
illeagalSustatus ( 34 ), -- Can't add/update/delete a temporary SU's service
addedKeyAlreadyExists ( 35 ), -- One of added record unique keys already exists
fileDoesNotExist ( 36 ), -- File doesn't exist
tableIsFull ( 37 ), -- Table is full
deleteSuServicesNeeded ( 38 ), -- Delete all SU's services first
differentServiceType ( 39 ), -- Can't change Service Profile type
differentForwardingType ( 40 ), -- Can't change Forwarding Rule type
differentForwardSrvcType ( 41 ), -- Mismatch between Service profile type and forwarding rule type
tooManyVlans ( 42 ), -- Too many VLAN IDs defined for service
updateSuStatus ( 43 ), -- Can't change SU status when SU is not in service
changeSu ( 44 ), -- Can't change SU MAC address for an enabled Service Pipe
vlanMismatch ( 45 ), -- Can't allocate on the same SU pipes with and without VLANs
wrongVlanId ( 46 ), -- Wrong VLAN ID (0 To 4094 expected)
wrongCgQosValues ( 47 ), -- Wrong CG QoS values (max rate can't exceed 12mbit/sec)
maxVlanPerSuExcedded ( 48 ), -- Maximum number of VLAN's allowed for SU is 16
duplicateRecordName ( 49 ), -- Duplicate record name
deleteTransparentFwRule ( 50 ), -- Can't delete transparent forwarding rule
transparentVlanVplMismatch ( 51 ), -- Transparent VLAN ID and VPL mismatch
transparentFwProfileMismatch ( 52 ), -- Transparent Forwarding Rule and Service Profile mismatch
missingTransparentFwRule ( 53 ), -- Missing transparent forwarding rule
globalProfile ( 54 ), -- Can't change global profile
wrongCirValue ( 55 ), -- Wrong CIR value
wrongMirValue ( 56 ), -- Wrong MIR value
invalidMaxCallsValue ( 57 ), -- Invalid value of maximum number of calls
invalidSampleRate ( 58 ), -- Invalid sample interval
invalidPacketSize ( 59 ), -- Invalid packet size
invalidFwRuleParameter ( 60 ), -- Invalid Forwarding Rule parameter
nullProfileName ( 61 ), -- Null profile name
invalidQosType ( 62 ), -- Invalid QoS type
invalidPriorityClassifierType ( 63 ), -- Invalid Priority Classifier type
invalidCT ( 64 ), -- Invalid CT
invalidTransparencyMode ( 65 ), -- Invalid transparency mode
oneVlanPermittedForVlanClassMode ( 66 ), -- Only one VLAN permitted when VLAN classification mode is ON
accessVlanMismatch ( 67 ), -- Access VLAN permitted only for empty VLAN list or for Hybrid mode ON with VLAN list
accessVlanDuplicate ( 68 ), -- Access VLAN can not be equal to any VLAN in the SU VLAN list
oneAccessVlanPerSU ( 69 ), -- Only one Access VLAN allowed per SU
changTransparentFWRuleName ( 70 ), -- Changing transparent forwarding rule name is not allowed
-- XML General Errors
unknownError ( 1000 ), -- Unknown error
xmlParseFormatErr ( 1001 ), -- XML file format error
xmlParseSyntaxErr ( 1002 ), -- XML file syntax error
xmlParseUnresolvedProfileErr ( 1003 ) -- XML file unresolved profile error
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the error encountered while parsing the XML file."
::= { rbXmlErrorReportEntry 4 }
rbXmlFileLineNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The line number in the XML file where the error was encountered."
::= { rbXmlErrorReportEntry 5 }
-- ============================================================
END
View Git Blame Copy Permalink