WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/adva/F3-L3-MIB

5959 lines
204 KiB
Plaintext
Raw Permalink Blame History

F3-L3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
DateAndTime, DisplayString, TruthValue, RowStatus, StorageType,
MacAddress, VariablePointer, TEXTUAL-CONVENTION
FROM SNMPv2-TC
Ipv6Address
FROM IPV6-TC
InterfaceIndex, ifIndex
FROM IF-MIB
PhysicalIndex
FROM ENTITY-MIB
fsp150cm
FROM ADVA-MIB
AdminState, OperationalState, SecondaryState, VlanId, VlanPriority,
F3DisplayString, IpVersion, TrafficDirection,
CmPmIntervalType, CmPmBinAction, PerfCounter64
FROM CM-COMMON-MIB
CmDhcpRole, DHCPHostNameType, DHCPCIDType,IpEntryType
FROM CM-IP-MIB
neIndex, shelfIndex, slotIndex
FROM CM-ENTITY-MIB
PolicerAlgorithmType, PolicerColorMode
FROM CM-FACILITY-MIB;
f3L3MIB MODULE-IDENTITY
LAST-UPDATED "201409120000Z"
ORGANIZATION "ADVA Optical Networking"
CONTACT-INFO
" Jack Chen
ADVA Optical Networking, Inc.
Tel: +86755 86217400-8205
E-mail: jchen@advaoptical.com
Postal:
"
DESCRIPTION
"This module defines the L3 MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking."
REVISION "201409120000Z"
DESCRIPTION
"Notes from release 201409120000Z"
::= {fsp150cm 37}
--
-- OID definitions
--
f3L3Objects OBJECT IDENTIFIER ::= {f3L3MIB 1}
f3L3Performance OBJECT IDENTIFIER ::= {f3L3MIB 2}
f3L3Notifications OBJECT IDENTIFIER ::= {f3L3MIB 3}
f3L3Conformance OBJECT IDENTIFIER ::= {f3L3MIB 4}
--
-- Textual Conventions
--
VrfAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the action on Vrf."
SYNTAX INTEGER {
notApplicable (0),
ping (1),
fluchARPCache(2),
traceRoute(3),
retrieveEffectiveRoutes(4)
}
IfIpAddressSourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Ip Interface adress source type."
SYNTAX INTEGER {
dhcp (1),
static(2)
}
DhcpRelayInterfaceSide ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the DHCP relay interface side."
SYNTAX INTEGER {
client (1),
server(2)
}
L3AclRuleOperation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the acl rule operation."
SYNTAX INTEGER {
notApplicable (0),
accept (1),
deny (2)
}
AclRuleL2Side ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the acl rule l2 side."
SYNTAX INTEGER {
access(1),
network(2)
}
TrafficIpRouteStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the traffci ipv4 route status."
SYNTAX INTEGER {
active(1),
nexthopUnresovled(2),
interfaceOutage(3),
noResources(4),
standby(5)
}
RouteFlags ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the traffci ipv4 route flags."
SYNTAX BITS {
dDynamic(0),
gUseGW(1),
hFullMask(2),
mModifiedByIcmp(3),
oOutage(4),
uNormal(5)
}
AffectiveArpActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the retrieve effective arp action."
SYNTAX INTEGER {
notApplicable (0),
retrieveAffectiveArp (1)
}
--
-- Mac Sec Table
--
f3DhcpRelayAgentTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3DhcpRelayAgentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the Dhcp Relay Agent."
::= { f3L3Objects 1 }
f3DhcpRelayAgentEntry OBJECT-TYPE
SYNTAX F3DhcpRelayAgentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3DhcpRelayAgentTable."
INDEX { neIndex, f3DhcpRelayAgentIndex }
::= { f3DhcpRelayAgentTable 1 }
F3DhcpRelayAgentEntry ::= SEQUENCE {
f3DhcpRelayAgentIndex Integer32,
f3DhcpRelayAgentAlias F3DisplayString,
f3DhcpRelayAgentAdminState AdminState,
f3DhcpRelayAgentSecondaryState SecondaryState,
f3DhcpRelayAgentOperationalState OperationalState,
f3DhcpRelayAgentIpVersion IpVersion,
f3DhcpRelayAgentServerIpAddress IpAddress,
f3DhcpRelayAgentOp82SubOp9ControlEnabled TruthValue,
f3DhcpRelayAgentOp82SubOp9Value DisplayString,
f3DhcpRelayAgentStorageType StorageType,
f3DhcpRelayAgentRowStatus RowStatus
}
f3DhcpRelayAgentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the DHCP relay agent entry."
::= { f3DhcpRelayAgentEntry 1 }
f3DhcpRelayAgentAlias OBJECT-TYPE
SYNTAX F3DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP relay agent alias."
::= { f3DhcpRelayAgentEntry 2 }
f3DhcpRelayAgentAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin state of this DCHP relay agent."
::= { f3DhcpRelayAgentEntry 3 }
f3DhcpRelayAgentSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary state of this DCHP relay agent."
::= { f3DhcpRelayAgentEntry 4 }
f3DhcpRelayAgentOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of this DCHP relay agent."
::= { f3DhcpRelayAgentEntry 5 }
f3DhcpRelayAgentIpVersion OBJECT-TYPE
SYNTAX IpVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ip version of this DCHP relay agent."
::= { f3DhcpRelayAgentEntry 6 }
f3DhcpRelayAgentServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ipv4 address of this DCHP relay agent."
::= { f3DhcpRelayAgentEntry 7 }
f3DhcpRelayAgentOp82SubOp9ControlEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the suboption9 of the option82 whether enabled."
::= { f3DhcpRelayAgentEntry 8 }
f3DhcpRelayAgentOp82SubOp9Value OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the vendor string if the suboption9 enabled."
::= { f3DhcpRelayAgentEntry 9 }
f3DhcpRelayAgentStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3DhcpRelayAgentEntry 10 }
f3DhcpRelayAgentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3DhcpRelayAgentRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3DhcpRelayAgentRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The f3DhcpRelayAgentRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3DhcpRelayAgentEntry 11 }
--
-- VRF User Table
--
f3VrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3VrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the VRF user."
::= { f3L3Objects 2 }
f3VrfEntry OBJECT-TYPE
SYNTAX F3VrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3VrfTable."
INDEX { neIndex, f3VrfIndex }
::= { f3VrfTable 1 }
F3VrfEntry ::= SEQUENCE {
f3VrfIndex Integer32,
f3VrfAlias F3DisplayString,
f3VrfAdminState AdminState,
f3VrfSecondaryState SecondaryState,
f3VrfOperationalState OperationalState,
f3VrfAccIsolationControlEnabled TruthValue,
f3VrfPingIpv4Destination IpAddress,
f3VrfTraceRouteIpv4Destination IpAddress,
f3VrfAction VrfAction,
f3VrfPingResult F3DisplayString,
f3VrfTraceRouteResult F3DisplayString,
f3VrfStorageType StorageType,
f3VrfRowStatus RowStatus,
f3VrfDhcpRoutesControl TruthValue
}
f3VrfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vrf number."
::= { f3VrfEntry 1 }
f3VrfAlias OBJECT-TYPE
SYNTAX F3DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the vrf alias."
::= { f3VrfEntry 2 }
f3VrfAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the vrf admin state."
::= { f3VrfEntry 3 }
f3VrfSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the vrf secondary state."
::= { f3VrfEntry 4 }
f3VrfOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the vrf operational state."
::= { f3VrfEntry 5 }
f3VrfAccIsolationControlEnabled OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control traffic between L3 flowpoint
on Acc port."
::= { f3VrfEntry 6 }
f3VrfPingIpv4Destination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IP Address to which
ICMP Ping will be initiated."
::= { f3VrfEntry 7 }
f3VrfTraceRouteIpv4Destination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IP Address to which
Trace Route will be initiated."
::= { f3VrfEntry 8 }
f3VrfAction OBJECT-TYPE
SYNTAX VrfAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vrf action, includes fluch ARP cache, ping, trace route."
::= { f3VrfEntry 9 }
f3VrfPingResult OBJECT-TYPE
SYNTAX F3DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ping action result."
::= { f3VrfEntry 10 }
f3VrfTraceRouteResult OBJECT-TYPE
SYNTAX F3DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trace route action result."
::= { f3VrfEntry 11 }
f3VrfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3VrfEntry 12 }
f3VrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3VrfRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3VrfRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The f3VrfRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3VrfEntry 13 }
f3VrfDhcpRoutesControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control dynamic routes creation based on DHCP relay agent operation.
if it is disabled, the vrf should not use host ip addresses assigned by means of DHCP relay agent
for the dynamic routes creation."
::= { f3VrfEntry 14 }
--
-- L3 flowpoint Table
--
f3L3FlowPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3FlowPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the L3 flowpoint."
::= { f3L3Objects 3 }
f3L3FlowPointEntry OBJECT-TYPE
SYNTAX F3L3FlowPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3FlowPointTable."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex }
::= { f3L3FlowPointTable 1 }
F3L3FlowPointEntry ::= SEQUENCE {
f3L3FlowPointPortTypeIndex Integer32,
f3L3FlowPointPortIndex Integer32,
f3L3FlowPointIndex Integer32,
f3L3FlowPointAlias F3DisplayString,
f3L3FlowPointAdminState AdminState,
f3L3FlowPointSecondaryState SecondaryState,
f3L3FlowPointOperationalState OperationalState,
f3L3FlowPointMultiCOSEnabled TruthValue,
f3L3FlowPointCOS Integer32,
f3L3FlowPointUntaggedMemberShipEnabled TruthValue,
f3L3FlowPointOuterTagMemberShipEnabled TruthValue,
f3L3FlowPointOuterTagMemberShipVlanId VlanId,
f3L3FlowPointInnerTagMemberShipEnabled TruthValue,
f3L3FlowPointInnerTagMemberShipVlanId VlanId,
f3L3FlowPointFragmentedPktsFwdEnabled TruthValue,
f3L3FlowPointHCosMgmtEnabled TruthValue,
f3L3FlowPointHCosGuaranteedBwHi Unsigned32,
f3L3FlowPointHCosGuaranteedBwLo Unsigned32,
f3L3FlowPointHCosMaximumBwHi Unsigned32,
f3L3FlowPointHCosMaximumBwLo Unsigned32,
f3L3FlowPointPolicingEnabled TruthValue,
f3L3FlowPointStorageType StorageType,
f3L3FlowPointRowStatus RowStatus
}
f3L3FlowPointPortTypeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It specifies the port type, value 1 means net port, value 2 means acc port."
::= { f3L3FlowPointEntry 1 }
f3L3FlowPointPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number value."
::= { f3L3FlowPointEntry 2 }
f3L3FlowPointIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L3 flow point number."
::= { f3L3FlowPointEntry 3 }
f3L3FlowPointAlias OBJECT-TYPE
SYNTAX F3DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the L3 flow point alias."
::= { f3L3FlowPointEntry 4 }
f3L3FlowPointAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the L3 flow point admin state."
::= { f3L3FlowPointEntry 5 }
f3L3FlowPointSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the L3 flow point secondary state."
::= { f3L3FlowPointEntry 6 }
f3L3FlowPointOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the L3 flow point operational state."
::= { f3L3FlowPointEntry 7 }
f3L3FlowPointMultiCOSEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control to enable or disable per-COS BWPs on a FlowPoint.
ENABLED:per-COS BWPs (CIR, EIR, CBS, EBS, CM, CF) are applied as a policing
function for all ingress frames of this flowpoint.
DISABLED:per-Flow BWP (CIR, EIR, CBS, EBS, CM, CF) is applied as a policing
function for all ingress frames of this flowpoint.
User must independently enable each COS BWP when ENABLED."
::= { f3L3FlowPointEntry 8 }
f3L3FlowPointCOS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies the internal COS applied to all ingress frames of the flowpoint."
::= { f3L3FlowPointEntry 9 }
f3L3FlowPointUntaggedMemberShipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls untagged frames membership for the Flowpoint.
ENABLED: Ingress untagged frame matches Flowpoint membership.
DISABLED: Ingress untagged frame does not match Flowpoint membership."
::= { f3L3FlowPointEntry 10 }
f3L3FlowPointOuterTagMemberShipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls outer tag membership for the Flowpoint whether enabled."
::= { f3L3FlowPointEntry 11 }
f3L3FlowPointOuterTagMemberShipVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls outer tag VlanId membership for the Flowpoint."
::= { f3L3FlowPointEntry 12 }
f3L3FlowPointInnerTagMemberShipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls inner tag membership for the Flowpoint whether enabled."
::= { f3L3FlowPointEntry 13 }
f3L3FlowPointInnerTagMemberShipVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls inner tag VlanId membership for the Flowpoint."
::= { f3L3FlowPointEntry 14 }
f3L3FlowPointFragmentedPktsFwdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies whether received IP Packets with More Fragments
flag should be forwarded by the FlowPoint."
::= { f3L3FlowPointEntry 15 }
f3L3FlowPointHCosMgmtEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies whether the Hierarchical COS shaping enabled for this flow point."
::= { f3L3FlowPointEntry 16 }
f3L3FlowPointHCosGuaranteedBwHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the Hierarchical COS guarranteed bandwidth
high 32 bits for this flow point."
::= { f3L3FlowPointEntry 17 }
f3L3FlowPointHCosGuaranteedBwLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the Hierarchical COS guarranteed bandwidth
low 32 bits for this flow point."
::= { f3L3FlowPointEntry 18 }
f3L3FlowPointHCosMaximumBwHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the Hierarchical COS maximum bandwidth
high 32 bits for this flow point."
::= { f3L3FlowPointEntry 19 }
f3L3FlowPointHCosMaximumBwLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the Hierarchical COS maximum bandwidth
low 32 bits for this flow point."
::= { f3L3FlowPointEntry 20 }
f3L3FlowPointPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute allows enable or disable policers of the flow point."
::= { f3L3FlowPointEntry 21 }
f3L3FlowPointStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3FlowPointEntry 22 }
f3L3FlowPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L3FlowPointRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L3FlowPointRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The f3L3FlowPointRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L3FlowPointEntry 23 }
--
-- L3 ACL Rule Table
--
f3L3AclRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3AclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the L3 ACL rule."
::= { f3L3Objects 4 }
f3L3AclRuleEntry OBJECT-TYPE
SYNTAX F3L3AclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3AclRuleTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex }
::= { f3L3AclRuleTable 1 }
F3L3AclRuleEntry ::= SEQUENCE {
f3L3AclRuleParentIndex Integer32,
f3L3AclRuleIndex Integer32,
f3L3AclRuleAlias F3DisplayString,
f3L3AclRuleSrcIpv4AddressControl TruthValue,
f3L3AclRuleDynamicSrcIpControl TruthValue,
f3L3AclRuleSrcIpv4AddressLowLimit IpAddress,
f3L3AclRuleDstIpv4AddressControl TruthValue,
f3L3AclRuleDstIpv4AddressLowLimit IpAddress,
f3L3AclRuleIpv4PriorityControl TruthValue,
f3L3AclRuleIpv4PriorityLowLimit Integer32,
f3L3AclRuleProtocolControl TruthValue,
f3L3AclRuleProtocolNumber Integer32,
f3L3AclRuleSrcPortControl TruthValue,
f3L3AclRuleSrcPortLowLimit Integer32,
f3L3AclRuleSrcPortHighLimit Integer32,
f3L3AclRuleDstPortControl TruthValue,
f3L3AclRuleDstPortLowLimit Integer32,
f3L3AclRuleDstPortHighLimit Integer32,
f3L3AclRulePriority Integer32,
f3L3AclRuleCOS Integer32,
f3L3AclRuleOperation L3AclRuleOperation,
f3L3AclRuleSummary F3DisplayString,
f3L3AclRuleCosOverrideControl TruthValue,
f3L3AclRuleSrcMacAddressControl TruthValue,
f3L3AclRuleDynamicSrcMacAddressControl TruthValue,
f3L3AclRuleSrcMacAddress MacAddress,
f3L3AclRuleSrcMacAddressMask MacAddress,
f3L3AclRuleDstMacAddressControl TruthValue,
f3L3AclRuleDstMacAddress MacAddress,
f3L3AclRuleDstMacAddressMask MacAddress,
f3L3AclRuleOuterVlanVIDControl TruthValue,
f3L3AclRuleOuterVlanVIDLowLimit VlanId,
f3L3AclRuleOuterVlanVIDHighLimit VlanId,
f3L3AclRuleInnerVlanVIDControl TruthValue,
f3L3AclRuleInnerVlanVIDLowLimit VlanId,
f3L3AclRuleInnerVlanVIDHighLimit VlanId,
f3L3AclRuleOuterVlanPcpControl TruthValue,
f3L3AclRuleOuterVlanPcpLowLimit VlanPriority,
f3L3AclRuleOuterVlanPcpHighLimit VlanPriority,
f3L3AclRuleInnerVlanPcpControl TruthValue,
f3L3AclRuleInnerVlanPcpLowLimit VlanPriority,
f3L3AclRuleInnerVlanPcpHighLimit VlanPriority,
f3L3AclRuleOuterVlanDeiControl TruthValue,
f3L3AclRuleOuterVlanDei Unsigned32,
f3L3AclRuleEtherTypeControl TruthValue,
f3L3AclRuleEtherType Integer32,
f3L3AclRuleTcpFlagsControl TruthValue,
f3L3AclRuleTcpFlags Integer32,
f3L3AclRuleSrcIpv4AddressHighLimit IpAddress,
f3L3AclRuleDstIpv4AddressHighLimit IpAddress,
f3L3AclRuleIpv4PriorityHighLimit Integer32,
f3L3AclRuleStorageType StorageType,
f3L3AclRuleRowStatus RowStatus,
f3L3AclRuleAdminState AdminState
}
f3L3AclRuleParentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rule parent number, it could be flow index or L3 flow point index."
::= { f3L3AclRuleEntry 1 }
f3L3AclRuleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rule number."
::= { f3L3AclRuleEntry 2 }
f3L3AclRuleAlias OBJECT-TYPE
SYNTAX F3DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule alias."
::= { f3L3AclRuleEntry 3 }
f3L3AclRuleSrcIpv4AddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source IPv4 Adress control whether enabled."
::= { f3L3AclRuleEntry 4 }
f3L3AclRuleDynamicSrcIpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic source IPv4 Adress control whether enabled."
::= { f3L3AclRuleEntry 5 }
f3L3AclRuleSrcIpv4AddressLowLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source IPv4 Adress low limit."
::= { f3L3AclRuleEntry 6 }
f3L3AclRuleDstIpv4AddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Destination IPv4 Adress control whether enabled."
::= { f3L3AclRuleEntry 7 }
f3L3AclRuleDstIpv4AddressLowLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Destination IPv4 Adress low limit."
::= { f3L3AclRuleEntry 8 }
f3L3AclRuleIpv4PriorityControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule IPv4 Priority control whether enabled."
::= { f3L3AclRuleEntry 9 }
f3L3AclRuleIpv4PriorityLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule IPv4 priority low limit."
::= { f3L3AclRuleEntry 10 }
f3L3AclRuleProtocolControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule protocol control whether enabled."
::= { f3L3AclRuleEntry 11 }
f3L3AclRuleProtocolNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule protocol number."
::= { f3L3AclRuleEntry 12 }
f3L3AclRuleSrcPortControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port whether enabled."
::= { f3L3AclRuleEntry 13 }
f3L3AclRuleSrcPortLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port low limit."
::= { f3L3AclRuleEntry 14 }
f3L3AclRuleSrcPortHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port low limit."
::= { f3L3AclRuleEntry 15 }
f3L3AclRuleDstPortControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port whether enabled."
::= { f3L3AclRuleEntry 16 }
f3L3AclRuleDstPortLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port low limit."
::= { f3L3AclRuleEntry 17 }
f3L3AclRuleDstPortHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port low limit."
::= { f3L3AclRuleEntry 18 }
f3L3AclRulePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule priority."
::= { f3L3AclRuleEntry 19 }
f3L3AclRuleCOS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule class of service."
::= { f3L3AclRuleEntry 20 }
f3L3AclRuleOperation OBJECT-TYPE
SYNTAX L3AclRuleOperation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule action."
::= { f3L3AclRuleEntry 21 }
f3L3AclRuleSummary OBJECT-TYPE
SYNTAX F3DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL rule summary."
::= { f3L3AclRuleEntry 22 }
f3L3AclRuleCosOverrideControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule COS Override control."
::= { f3L3AclRuleEntry 23 }
f3L3AclRuleSrcMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Source MAC address control."
::= { f3L3AclRuleEntry 24 }
f3L3AclRuleDynamicSrcMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address control."
::= { f3L3AclRuleEntry 25 }
f3L3AclRuleSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address."
::= { f3L3AclRuleEntry 26 }
f3L3AclRuleSrcMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address mask."
::= { f3L3AclRuleEntry 27 }
f3L3AclRuleDstMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address control."
::= { f3L3AclRuleEntry 28 }
f3L3AclRuleDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address."
::= { f3L3AclRuleEntry 29 }
f3L3AclRuleDstMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address mask."
::= { f3L3AclRuleEntry 30 }
f3L3AclRuleOuterVlanVIDControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer VID control."
::= { f3L3AclRuleEntry 31 }
f3L3AclRuleOuterVlanVIDLowLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer Vlan ID low limit."
::= { f3L3AclRuleEntry 32 }
f3L3AclRuleOuterVlanVIDHighLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer Vlan ID high limit."
::= { f3L3AclRuleEntry 33 }
f3L3AclRuleInnerVlanVIDControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner VID control."
::= { f3L3AclRuleEntry 34 }
f3L3AclRuleInnerVlanVIDLowLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner Vlan ID low limit."
::= { f3L3AclRuleEntry 35 }
f3L3AclRuleInnerVlanVIDHighLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Inner Vlan ID high limit."
::= { f3L3AclRuleEntry 36 }
f3L3AclRuleOuterVlanPcpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP control."
::= { f3L3AclRuleEntry 37 }
f3L3AclRuleOuterVlanPcpLowLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP priority low limit."
::= { f3L3AclRuleEntry 38 }
f3L3AclRuleOuterVlanPcpHighLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP priority high limit."
::= { f3L3AclRuleEntry 39 }
f3L3AclRuleInnerVlanPcpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP control."
::= { f3L3AclRuleEntry 40 }
f3L3AclRuleInnerVlanPcpLowLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP priority low limit."
::= { f3L3AclRuleEntry 41 }
f3L3AclRuleInnerVlanPcpHighLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP priority high limit."
::= { f3L3AclRuleEntry 42 }
f3L3AclRuleOuterVlanDeiControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan DEI control."
::= { f3L3AclRuleEntry 43 }
f3L3AclRuleOuterVlanDei OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan DEI."
::= { f3L3AclRuleEntry 44 }
f3L3AclRuleEtherTypeControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan ether type control."
::= { f3L3AclRuleEntry 45 }
f3L3AclRuleEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan ether type."
::= { f3L3AclRuleEntry 46 }
f3L3AclRuleTcpFlagsControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan TCP flags control."
::= { f3L3AclRuleEntry 47 }
f3L3AclRuleTcpFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan TCP flags."
::= { f3L3AclRuleEntry 48 }
f3L3AclRuleSrcIpv4AddressHighLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source ipv4 adress high limit."
::= { f3L3AclRuleEntry 49 }
f3L3AclRuleDstIpv4AddressHighLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination ipv4 adress high limit."
::= { f3L3AclRuleEntry 50 }
f3L3AclRuleIpv4PriorityHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule ipv4 priority high limit."
::= { f3L3AclRuleEntry 51 }
f3L3AclRuleStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3AclRuleEntry 52 }
f3L3AclRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L3AclRuleRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L3AclRuleRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L3AclRuleRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L3AclRuleEntry 53 }
f3L3AclRuleAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user configure the Acl Rule in in-service or management state."
::= { f3L3AclRuleEntry 54 }
--
-- L2 A2N ACL Rule Table
--
f3L2A2NAclRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2A2NAclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the L2A2N ACL rule."
::= { f3L3Objects 5 }
f3L2A2NAclRuleEntry OBJECT-TYPE
SYNTAX F3L2A2NAclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2A2NAclRuleTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex }
::= { f3L2A2NAclRuleTable 1 }
F3L2A2NAclRuleEntry ::= SEQUENCE {
f3L2A2NAclRuleParentIndex Integer32,
f3L2A2NAclRuleIndex Integer32,
f3L2A2NAclRuleAlias F3DisplayString,
f3L2A2NAclRuleSrcIpv4AddressControl TruthValue,
f3L2A2NAclRuleDynamicSrcIpControl TruthValue,
f3L2A2NAclRuleSrcIpv4AddressLowLimit IpAddress,
f3L2A2NAclRuleDstIpv4AddressControl TruthValue,
f3L2A2NAclRuleDstIpv4AddressLowLimit IpAddress,
f3L2A2NAclRuleIpv4PriorityControl TruthValue,
f3L2A2NAclRuleIpv4PriorityLowLimit Integer32,
f3L2A2NAclRuleProtocolControl TruthValue,
f3L2A2NAclRuleProtocolNumber Integer32,
f3L2A2NAclRuleSrcPortControl TruthValue,
f3L2A2NAclRuleSrcPortLowLimit Integer32,
f3L2A2NAclRuleSrcPortHighLimit Integer32,
f3L2A2NAclRuleDstPortControl TruthValue,
f3L2A2NAclRuleDstPortLowLimit Integer32,
f3L2A2NAclRuleDstPortHighLimit Integer32,
f3L2A2NAclRulePriority Integer32,
f3L2A2NAclRuleCOS Integer32,
f3L2A2NAclRuleOperation L3AclRuleOperation,
f3L2A2NAclRuleSummary F3DisplayString,
f3L2A2NAclRuleCosOverrideControl TruthValue,
f3L2A2NAclRuleSrcMacAddressControl TruthValue,
f3L2A2NAclRuleDynamicSrcMacAddressControl TruthValue,
f3L2A2NAclRuleSrcMacAddress MacAddress,
f3L2A2NAclRuleSrcMacAddressMask MacAddress,
f3L2A2NAclRuleDstMacAddressControl TruthValue,
f3L2A2NAclRuleDstMacAddress MacAddress,
f3L2A2NAclRuleDstMacAddressMask MacAddress,
f3L2A2NAclRuleOuterVlanVIDControl TruthValue,
f3L2A2NAclRuleOuterVlanVIDLowLimit VlanId,
f3L2A2NAclRuleOuterVlanVIDHighLimit VlanId,
f3L2A2NAclRuleInnerVlanVIDControl TruthValue,
f3L2A2NAclRuleInnerVlanVIDLowLimit VlanId,
f3L2A2NAclRuleInnerVlanVIDHighLimit VlanId,
f3L2A2NAclRuleOuterVlanPcpControl TruthValue,
f3L2A2NAclRuleOuterVlanPcpLowLimit VlanPriority,
f3L2A2NAclRuleOuterVlanPcpHighLimit VlanPriority,
f3L2A2NAclRuleInnerVlanPcpControl TruthValue,
f3L2A2NAclRuleInnerVlanPcpLowLimit VlanPriority,
f3L2A2NAclRuleInnerVlanPcpHighLimit VlanPriority,
f3L2A2NAclRuleOuterVlanDeiControl TruthValue,
f3L2A2NAclRuleOuterVlanDei Unsigned32,
f3L2A2NAclRuleEtherTypeControl TruthValue,
f3L2A2NAclRuleEtherType Integer32,
f3L2A2NAclRuleTcpFlagsControl TruthValue,
f3L2A2NAclRuleTcpFlags Integer32,
f3L2A2NAclRuleSrcIpv4AddressHighLimit IpAddress,
f3L2A2NAclRuleDstIpv4AddressHighLimit IpAddress,
f3L2A2NAclRuleIpv4PriorityHighLimit Integer32,
f3L2A2NAclRuleStorageType StorageType,
f3L2A2NAclRuleRowStatus RowStatus,
f3L2A2NAclRuleAdminState AdminState
}
f3L2A2NAclRuleParentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rule parent number, it could be flow index"
::= { f3L2A2NAclRuleEntry 1 }
f3L2A2NAclRuleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rule number."
::= { f3L2A2NAclRuleEntry 2 }
f3L2A2NAclRuleAlias OBJECT-TYPE
SYNTAX F3DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule alias."
::= { f3L2A2NAclRuleEntry 3 }
f3L2A2NAclRuleSrcIpv4AddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source IPv4 Adress control whether enabled."
::= { f3L2A2NAclRuleEntry 4 }
f3L2A2NAclRuleDynamicSrcIpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic source IPv4 Adress control whether enabled."
::= { f3L2A2NAclRuleEntry 5 }
f3L2A2NAclRuleSrcIpv4AddressLowLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source IPv4 Adress low limit."
::= { f3L2A2NAclRuleEntry 6 }
f3L2A2NAclRuleDstIpv4AddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Destination IPv4 Adress control whether enabled."
::= { f3L2A2NAclRuleEntry 7 }
f3L2A2NAclRuleDstIpv4AddressLowLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Destination IPv4 Adress low limit."
::= { f3L2A2NAclRuleEntry 8 }
f3L2A2NAclRuleIpv4PriorityControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule IPv4 Priority control whether enabled."
::= { f3L2A2NAclRuleEntry 9 }
f3L2A2NAclRuleIpv4PriorityLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule IPv4 priority low limit."
::= { f3L2A2NAclRuleEntry 10 }
f3L2A2NAclRuleProtocolControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule protocol control whether enabled."
::= { f3L2A2NAclRuleEntry 11 }
f3L2A2NAclRuleProtocolNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule protocol number."
::= { f3L2A2NAclRuleEntry 12 }
f3L2A2NAclRuleSrcPortControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port whether enabled."
::= { f3L2A2NAclRuleEntry 13 }
f3L2A2NAclRuleSrcPortLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port low limit."
::= { f3L2A2NAclRuleEntry 14 }
f3L2A2NAclRuleSrcPortHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port low limit."
::= { f3L2A2NAclRuleEntry 15 }
f3L2A2NAclRuleDstPortControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port whether enabled."
::= { f3L2A2NAclRuleEntry 16 }
f3L2A2NAclRuleDstPortLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port low limit."
::= { f3L2A2NAclRuleEntry 17 }
f3L2A2NAclRuleDstPortHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port low limit."
::= { f3L2A2NAclRuleEntry 18 }
f3L2A2NAclRulePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule priority."
::= { f3L2A2NAclRuleEntry 19 }
f3L2A2NAclRuleCOS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule class of service."
::= { f3L2A2NAclRuleEntry 20 }
f3L2A2NAclRuleOperation OBJECT-TYPE
SYNTAX L3AclRuleOperation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule action."
::= { f3L2A2NAclRuleEntry 21 }
f3L2A2NAclRuleSummary OBJECT-TYPE
SYNTAX F3DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL rule summary."
::= { f3L2A2NAclRuleEntry 22 }
f3L2A2NAclRuleCosOverrideControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule COS Override control."
::= { f3L2A2NAclRuleEntry 23 }
f3L2A2NAclRuleSrcMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Source MAC address control."
::= { f3L2A2NAclRuleEntry 24 }
f3L2A2NAclRuleDynamicSrcMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address control."
::= { f3L2A2NAclRuleEntry 25 }
f3L2A2NAclRuleSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address."
::= { f3L2A2NAclRuleEntry 26 }
f3L2A2NAclRuleSrcMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address mask."
::= { f3L2A2NAclRuleEntry 27 }
f3L2A2NAclRuleDstMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address control."
::= { f3L2A2NAclRuleEntry 28 }
f3L2A2NAclRuleDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address."
::= { f3L2A2NAclRuleEntry 29 }
f3L2A2NAclRuleDstMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address mask."
::= { f3L2A2NAclRuleEntry 30 }
f3L2A2NAclRuleOuterVlanVIDControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer VID control."
::= { f3L2A2NAclRuleEntry 31 }
f3L2A2NAclRuleOuterVlanVIDLowLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer Vlan ID low limit."
::= { f3L2A2NAclRuleEntry 32 }
f3L2A2NAclRuleOuterVlanVIDHighLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer Vlan ID high limit."
::= { f3L2A2NAclRuleEntry 33 }
f3L2A2NAclRuleInnerVlanVIDControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner VID control."
::= { f3L2A2NAclRuleEntry 34 }
f3L2A2NAclRuleInnerVlanVIDLowLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner Vlan ID low limit."
::= { f3L2A2NAclRuleEntry 35 }
f3L2A2NAclRuleInnerVlanVIDHighLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Inner Vlan ID high limit."
::= { f3L2A2NAclRuleEntry 36 }
f3L2A2NAclRuleOuterVlanPcpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP control."
::= { f3L2A2NAclRuleEntry 37 }
f3L2A2NAclRuleOuterVlanPcpLowLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP priority low limit."
::= { f3L2A2NAclRuleEntry 38 }
f3L2A2NAclRuleOuterVlanPcpHighLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP priority high limit."
::= { f3L2A2NAclRuleEntry 39 }
f3L2A2NAclRuleInnerVlanPcpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP control."
::= { f3L2A2NAclRuleEntry 40 }
f3L2A2NAclRuleInnerVlanPcpLowLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP priority low limit."
::= { f3L2A2NAclRuleEntry 41 }
f3L2A2NAclRuleInnerVlanPcpHighLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP priority high limit."
::= { f3L2A2NAclRuleEntry 42 }
f3L2A2NAclRuleOuterVlanDeiControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan DEI control."
::= { f3L2A2NAclRuleEntry 43 }
f3L2A2NAclRuleOuterVlanDei OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan DEI."
::= { f3L2A2NAclRuleEntry 44 }
f3L2A2NAclRuleEtherTypeControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan ether type control."
::= { f3L2A2NAclRuleEntry 45 }
f3L2A2NAclRuleEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan ether type."
::= { f3L2A2NAclRuleEntry 46 }
f3L2A2NAclRuleTcpFlagsControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan TCP flags control."
::= { f3L2A2NAclRuleEntry 47 }
f3L2A2NAclRuleTcpFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan TCP flags."
::= { f3L2A2NAclRuleEntry 48 }
f3L2A2NAclRuleSrcIpv4AddressHighLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source ipv4 adress high limit."
::= { f3L2A2NAclRuleEntry 49 }
f3L2A2NAclRuleDstIpv4AddressHighLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination ipv4 adress high limit."
::= { f3L2A2NAclRuleEntry 50 }
f3L2A2NAclRuleIpv4PriorityHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule ipv4 priority high limit."
::= { f3L2A2NAclRuleEntry 51 }
f3L2A2NAclRuleStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L2A2NAclRuleEntry 52 }
f3L2A2NAclRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L2A2NAclRuleRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L2A2NAclRuleRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L2A2NAclRuleRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L2A2NAclRuleEntry 53 }
f3L2A2NAclRuleAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user configure the Acl Rule in-service or management state."
::= { f3L2A2NAclRuleEntry 54 }
--
-- L2 N2A ACL Rule Table
--
f3L2N2AAclRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2N2AAclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the L2N2A ACL rule."
::= { f3L3Objects 6 }
f3L2N2AAclRuleEntry OBJECT-TYPE
SYNTAX F3L2N2AAclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2N2AAclRuleTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex }
::= { f3L2N2AAclRuleTable 1 }
F3L2N2AAclRuleEntry ::= SEQUENCE {
f3L2N2AAclRuleParentIndex Integer32,
f3L2N2AAclRuleIndex Integer32,
f3L2N2AAclRuleAlias F3DisplayString,
f3L2N2AAclRuleSrcIpv4AddressControl TruthValue,
f3L2N2AAclRuleDynamicSrcIpControl TruthValue,
f3L2N2AAclRuleSrcIpv4AddressLowLimit IpAddress,
f3L2N2AAclRuleDstIpv4AddressControl TruthValue,
f3L2N2AAclRuleDstIpv4AddressLowLimit IpAddress,
f3L2N2AAclRuleIpv4PriorityControl TruthValue,
f3L2N2AAclRuleIpv4PriorityLowLimit Integer32,
f3L2N2AAclRuleProtocolControl TruthValue,
f3L2N2AAclRuleProtocolNumber Integer32,
f3L2N2AAclRuleSrcPortControl TruthValue,
f3L2N2AAclRuleSrcPortLowLimit Integer32,
f3L2N2AAclRuleSrcPortHighLimit Integer32,
f3L2N2AAclRuleDstPortControl TruthValue,
f3L2N2AAclRuleDstPortLowLimit Integer32,
f3L2N2AAclRuleDstPortHighLimit Integer32,
f3L2N2AAclRulePriority Integer32,
f3L2N2AAclRuleCOS Integer32,
f3L2N2AAclRuleOperation L3AclRuleOperation,
f3L2N2AAclRuleSummary F3DisplayString,
f3L2N2AAclRuleCosOverrideControl TruthValue,
f3L2N2AAclRuleSrcMacAddressControl TruthValue,
f3L2N2AAclRuleDynamicSrcMacAddressControl TruthValue,
f3L2N2AAclRuleSrcMacAddress MacAddress,
f3L2N2AAclRuleSrcMacAddressMask MacAddress,
f3L2N2AAclRuleDstMacAddressControl TruthValue,
f3L2N2AAclRuleDstMacAddress MacAddress,
f3L2N2AAclRuleDstMacAddressMask MacAddress,
f3L2N2AAclRuleOuterVlanVIDControl TruthValue,
f3L2N2AAclRuleOuterVlanVIDLowLimit VlanId,
f3L2N2AAclRuleOuterVlanVIDHighLimit VlanId,
f3L2N2AAclRuleInnerVlanVIDControl TruthValue,
f3L2N2AAclRuleInnerVlanVIDLowLimit VlanId,
f3L2N2AAclRuleInnerVlanVIDHighLimit VlanId,
f3L2N2AAclRuleOuterVlanPcpControl TruthValue,
f3L2N2AAclRuleOuterVlanPcpLowLimit VlanPriority,
f3L2N2AAclRuleOuterVlanPcpHighLimit VlanPriority,
f3L2N2AAclRuleInnerVlanPcpControl TruthValue,
f3L2N2AAclRuleInnerVlanPcpLowLimit VlanPriority,
f3L2N2AAclRuleInnerVlanPcpHighLimit VlanPriority,
f3L2N2AAclRuleOuterVlanDeiControl TruthValue,
f3L2N2AAclRuleOuterVlanDei Unsigned32,
f3L2N2AAclRuleEtherTypeControl TruthValue,
f3L2N2AAclRuleEtherType Integer32,
f3L2N2AAclRuleTcpFlagsControl TruthValue,
f3L2N2AAclRuleTcpFlags Integer32,
f3L2N2AAclRuleSrcIpv4AddressHighLimit IpAddress,
f3L2N2AAclRuleDstIpv4AddressHighLimit IpAddress,
f3L2N2AAclRuleIpv4PriorityHighLimit Integer32,
f3L2N2AAclRuleStorageType StorageType,
f3L2N2AAclRuleRowStatus RowStatus,
f3L2N2AAclRuleAdminState AdminState
}
f3L2N2AAclRuleParentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rule parent number, it could be flow index"
::= { f3L2N2AAclRuleEntry 1 }
f3L2N2AAclRuleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rule number."
::= { f3L2N2AAclRuleEntry 2 }
f3L2N2AAclRuleAlias OBJECT-TYPE
SYNTAX F3DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule alias."
::= { f3L2N2AAclRuleEntry 3 }
f3L2N2AAclRuleSrcIpv4AddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source IPv4 Adress control whether enabled."
::= { f3L2N2AAclRuleEntry 4 }
f3L2N2AAclRuleDynamicSrcIpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic source IPv4 Adress control whether enabled."
::= { f3L2N2AAclRuleEntry 5 }
f3L2N2AAclRuleSrcIpv4AddressLowLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source IPv4 Adress low limit."
::= { f3L2N2AAclRuleEntry 6 }
f3L2N2AAclRuleDstIpv4AddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Destination IPv4 Adress control whether enabled."
::= { f3L2N2AAclRuleEntry 7 }
f3L2N2AAclRuleDstIpv4AddressLowLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Destination IPv4 Adress low limit."
::= { f3L2N2AAclRuleEntry 8 }
f3L2N2AAclRuleIpv4PriorityControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule IPv4 Priority control whether enabled."
::= { f3L2N2AAclRuleEntry 9 }
f3L2N2AAclRuleIpv4PriorityLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule IPv4 priority low limit."
::= { f3L2N2AAclRuleEntry 10 }
f3L2N2AAclRuleProtocolControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule protocol control whether enabled."
::= { f3L2N2AAclRuleEntry 11 }
f3L2N2AAclRuleProtocolNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule protocol number."
::= { f3L2N2AAclRuleEntry 12 }
f3L2N2AAclRuleSrcPortControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port whether enabled."
::= { f3L2N2AAclRuleEntry 13 }
f3L2N2AAclRuleSrcPortLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port low limit."
::= { f3L2N2AAclRuleEntry 14 }
f3L2N2AAclRuleSrcPortHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source port low limit."
::= { f3L2N2AAclRuleEntry 15 }
f3L2N2AAclRuleDstPortControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port whether enabled."
::= { f3L2N2AAclRuleEntry 16 }
f3L2N2AAclRuleDstPortLowLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port low limit."
::= { f3L2N2AAclRuleEntry 17 }
f3L2N2AAclRuleDstPortHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination port low limit."
::= { f3L2N2AAclRuleEntry 18 }
f3L2N2AAclRulePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule priority."
::= { f3L2N2AAclRuleEntry 19 }
f3L2N2AAclRuleCOS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule class of service."
::= { f3L2N2AAclRuleEntry 20 }
f3L2N2AAclRuleOperation OBJECT-TYPE
SYNTAX L3AclRuleOperation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule action."
::= { f3L2N2AAclRuleEntry 21 }
f3L2N2AAclRuleSummary OBJECT-TYPE
SYNTAX F3DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL rule summary."
::= { f3L2N2AAclRuleEntry 22 }
f3L2N2AAclRuleCosOverrideControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule COS Override control."
::= { f3L2N2AAclRuleEntry 23 }
f3L2N2AAclRuleSrcMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Source MAC address control."
::= { f3L2N2AAclRuleEntry 24 }
f3L2N2AAclRuleDynamicSrcMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address control."
::= { f3L2N2AAclRuleEntry 25 }
f3L2N2AAclRuleSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address."
::= { f3L2N2AAclRuleEntry 26 }
f3L2N2AAclRuleSrcMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Source MAC address mask."
::= { f3L2N2AAclRuleEntry 27 }
f3L2N2AAclRuleDstMacAddressControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address control."
::= { f3L2N2AAclRuleEntry 28 }
f3L2N2AAclRuleDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address."
::= { f3L2N2AAclRuleEntry 29 }
f3L2N2AAclRuleDstMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule dynamic Destination MAC address mask."
::= { f3L2N2AAclRuleEntry 30 }
f3L2N2AAclRuleOuterVlanVIDControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer VID control."
::= { f3L2N2AAclRuleEntry 31 }
f3L2N2AAclRuleOuterVlanVIDLowLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer Vlan ID low limit."
::= { f3L2N2AAclRuleEntry 32 }
f3L2N2AAclRuleOuterVlanVIDHighLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer Vlan ID high limit."
::= { f3L2N2AAclRuleEntry 33 }
f3L2N2AAclRuleInnerVlanVIDControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner VID control."
::= { f3L2N2AAclRuleEntry 34 }
f3L2N2AAclRuleInnerVlanVIDLowLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner Vlan ID low limit."
::= { f3L2N2AAclRuleEntry 35 }
f3L2N2AAclRuleInnerVlanVIDHighLimit OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule Inner Vlan ID high limit."
::= { f3L2N2AAclRuleEntry 36 }
f3L2N2AAclRuleOuterVlanPcpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP control."
::= { f3L2N2AAclRuleEntry 37 }
f3L2N2AAclRuleOuterVlanPcpLowLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP priority low limit."
::= { f3L2N2AAclRuleEntry 38 }
f3L2N2AAclRuleOuterVlanPcpHighLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan PCP priority high limit."
::= { f3L2N2AAclRuleEntry 39 }
f3L2N2AAclRuleInnerVlanPcpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP control."
::= { f3L2N2AAclRuleEntry 40 }
f3L2N2AAclRuleInnerVlanPcpLowLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP priority low limit."
::= { f3L2N2AAclRuleEntry 41 }
f3L2N2AAclRuleInnerVlanPcpHighLimit OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule inner vlan PCP priority high limit."
::= { f3L2N2AAclRuleEntry 42 }
f3L2N2AAclRuleOuterVlanDeiControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan DEI control."
::= { f3L2N2AAclRuleEntry 43 }
f3L2N2AAclRuleOuterVlanDei OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan DEI."
::= { f3L2N2AAclRuleEntry 44 }
f3L2N2AAclRuleEtherTypeControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan ether type control."
::= { f3L2N2AAclRuleEntry 45 }
f3L2N2AAclRuleEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan ether type."
::= { f3L2N2AAclRuleEntry 46 }
f3L2N2AAclRuleTcpFlagsControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan TCP flags control."
::= { f3L2N2AAclRuleEntry 47 }
f3L2N2AAclRuleTcpFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule outer vlan TCP flags."
::= { f3L2N2AAclRuleEntry 48 }
f3L2N2AAclRuleSrcIpv4AddressHighLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule source ipv4 adress high limit."
::= { f3L2N2AAclRuleEntry 49 }
f3L2N2AAclRuleDstIpv4AddressHighLimit OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule destination ipv4 adress high limit."
::= { f3L2N2AAclRuleEntry 50 }
f3L2N2AAclRuleIpv4PriorityHighLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL rule ipv4 priority high limit."
::= { f3L2N2AAclRuleEntry 51 }
f3L2N2AAclRuleStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L2N2AAclRuleEntry 52 }
f3L2N2AAclRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L2N2AAclRuleRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L2N2AAclRuleRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L2N2AAclRuleRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L2N2AAclRuleEntry 53 }
f3L2N2AAclRuleAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user configure the Acl Rule in-service or management state."
::= { f3L2N2AAclRuleEntry 54 }
--
--L3 Policer
--
f3L3QosPolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to Ethernet Quality of Service
Policer for configuration purposes."
::= { f3L3Objects 7 }
f3L3QosPolicerEntry OBJECT-TYPE
SYNTAX F3L3QosPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosPolicerTable.
These entries represent a Quality of Service Policer."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex }
::= { f3L3QosPolicerTable 1 }
F3L3QosPolicerEntry ::= SEQUENCE {
f3L3QosPolicerIndex Integer32,
-- State Management params
f3L3QosPolicerAdminState AdminState,
f3L3QosPolicerOperationalState OperationalState,
f3L3QosPolicerSecondaryState SecondaryState,
f3L3QosPolicerCIRLo Unsigned32,
f3L3QosPolicerCIRHi Unsigned32,
f3L3QosPolicerEIRLo Unsigned32,
f3L3QosPolicerEIRHi Unsigned32,
f3L3QosPolicerCBS Integer32,
f3L3QosPolicerEBS Integer32,
f3L3QosPolicerAlgorithm PolicerAlgorithmType,
f3L3QosPolicerColorMode PolicerColorMode,
f3L3QosPolicerCouplingFlag TruthValue,
f3L3QosPolicerStorageType StorageType,
f3L3QosPolicerRowStatus RowStatus
}
f3L3QosPolicerIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Policer Index that represents the COS level. This
is applicable in case of a Multi COS flow. Index 1
represents COS 0; Index 2 represents COS 1 and so on.
In release 5.6CC the range is extended to 1..16 to support duplicate
N2A policers on a Flow. The duplicate policers are created under a Flow
if network interface of the Flow is ERP Group or Split Horizon Group.
In case of multi-cos Flow indices 1..8 represent policers of COS 0..7
going from Network 1 port; indices 9..16 represent policers for COS 0..7
going from Network 2 port.
In case of single-cos Flow index 1 represents policer going from Network 1
port; index 9 represents policer going from Network 2 port.
"
::= { f3L3QosPolicerEntry 1 }
-- State Management params
f3L3QosPolicerAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Administrative State of
the QOS Flow Policer."
::= { f3L3QosPolicerEntry 2 }
f3L3QosPolicerOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Operational State of the QOS Flow Policer."
::= { f3L3QosPolicerEntry 3 }
f3L3QosPolicerSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Secondary State of the QOS Flow Policer."
::= { f3L3QosPolicerEntry 4 }
f3L3QosPolicerCIRLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the lower 32 bits of the
CIR."
::= { f3L3QosPolicerEntry 5 }
f3L3QosPolicerCIRHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the upper 32 bits of the
CIR."
::= { f3L3QosPolicerEntry 6 }
f3L3QosPolicerEIRLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the lower 32 bits
of the EIR."
::= { f3L3QosPolicerEntry 7 }
f3L3QosPolicerEIRHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the upper 32 bits
of the EIR."
::= { f3L3QosPolicerEntry 8 }
f3L3QosPolicerCBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Commited Burst Size
(CBS) on Policer."
::= { f3L3QosPolicerEntry 9 }
f3L3QosPolicerEBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Excess Burst Size
(EBS) on the Policer."
::= { f3L3QosPolicerEntry 10 }
f3L3QosPolicerAlgorithm OBJECT-TYPE
SYNTAX PolicerAlgorithmType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object allows specification of Policer algorithm as
'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate
Triple Color Marking)."
::= { f3L3QosPolicerEntry 11 }
f3L3QosPolicerColorMode OBJECT-TYPE
SYNTAX PolicerColorMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'."
::= { f3L3QosPolicerEntry 12 }
f3L3QosPolicerCouplingFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of Policer Coupling Flag.
When coupling is enabled, tokens that would normally be
added to the C-bucket are passed to the E-bucket only once the CIR
bucket has reached its CBS level. Therefore under this condition
the E-bucket is being filled at the rate of CIR + EIR.
Normally the long term average of frames declared yellow is
bounded by the EIR. Coupling is a function to allow the
long term average of frames declared yellow to be bounded by
CIR + EIR. This allows a higher volume of yellow frames
to be delivered/received if the arrival of green marked frames
is low. Tokens from the E-bucket do NOT get passed to the
C-bucket once the EBS level has been reached.
Enabling coupling in combination with a provisioned EIR of 0
allows for a single rate three color marking (srTCM) algorithm
to be established. In this situation the E-bucket is filled at the
CIR rate in the case the C-bucket is filled to its CBS level."
::= { f3L3QosPolicerEntry 13 }
f3L3QosPolicerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3QosPolicerEntry 14 }
f3L3QosPolicerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L3QosPolicerRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L3QosPolicerRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L3QosPolicerRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L3QosPolicerEntry 15 }
--
-- L3 Port Quality of Service Shaper
--
f3L3QosShaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosShaperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to Ethernet Access Port
Quality of Service Shaper for configuration purposes.
These shapers can be managed when the Access Port is
in evpl mode and are relevant for traffic in the
network to access direction."
::= { f3L3Objects 8 }
f3L3QosShaperEntry OBJECT-TYPE
SYNTAX F3L3QosShaperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosShaperTable.
These entries represent a Quality of Service Shaper."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex,
f3L3QosShaperIndex }
::= { f3L3QosShaperTable 1 }
F3L3QosShaperEntry ::= SEQUENCE {
-- QOS Shaper Index/Id
f3L3QosShaperIndex Integer32,
-- State Management params
f3L3QosShaperAdminState AdminState,
f3L3QosShaperOperationalState OperationalState,
f3L3QosShaperSecondaryState SecondaryState,
-- QOS Shaper Properties
f3L3QosShaperCIRLo Unsigned32,
f3L3QosShaperCIRHi Unsigned32,
f3L3QosShaperEIRLo Unsigned32,
f3L3QosShaperEIRHi Unsigned32,
f3L3QosShaperBufferSize Unsigned32,
f3L3QosShaperCOS Integer32,
--wred threshold
f3L3QosShaperWredGreenMinQueueThreshold Unsigned32,
f3L3QosShaperWredGreenMaxQueueThreshold Unsigned32,
f3L3QosShaperWredGreenDropProbability Unsigned32,
f3L3QosShaperWredYellowMinQueueThreshold Unsigned32,
f3L3QosShaperWredYellowMaxQueueThreshold Unsigned32,
f3L3QosShaperWredYellowDropProbability Unsigned32,
f3L3QosShaperStorageType StorageType,
f3L3QosShaperRowStatus RowStatus
}
f3L3QosShaperIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The unique integer index value corresponding to a
Quality of Service Shaper."
::= { f3L3QosShaperEntry 1 }
-- State Management params
f3L3QosShaperAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Administrative State of
the QOS Shaper."
::= { f3L3QosShaperEntry 2 }
f3L3QosShaperOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Operational State of the QOS Shaper."
::= { f3L3QosShaperEntry 3 }
f3L3QosShaperSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Secondary State of the QOS Shaper."
::= { f3L3QosShaperEntry 4 }
f3L3QosShaperCIRLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper."
::= { f3L3QosShaperEntry 5 }
f3L3QosShaperCIRHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper."
::= { f3L3QosShaperEntry 6 }
f3L3QosShaperEIRLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper."
::= { f3L3QosShaperEntry 7 }
f3L3QosShaperEIRHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper."
::= { f3L3QosShaperEntry 8 }
f3L3QosShaperBufferSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Buffer Size of the Shaper."
::= { f3L3QosShaperEntry 9 }
f3L3QosShaperCOS OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the COS (Class of Service)
value for the QOS Shaper."
::= { f3L3QosShaperEntry 10 }
f3L3QosShaperWredGreenMinQueueThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Wred green packet min queue threshold value."
::= { f3L3QosShaperEntry 11 }
f3L3QosShaperWredGreenMaxQueueThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Wred green packet max queue threshold value."
::= { f3L3QosShaperEntry 12 }
f3L3QosShaperWredGreenDropProbability OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Wred green packet drop probability."
::= { f3L3QosShaperEntry 13 }
f3L3QosShaperWredYellowMinQueueThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Wred yellow packet min queue threshold value."
::= { f3L3QosShaperEntry 14 }
f3L3QosShaperWredYellowMaxQueueThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Wred yellow packet max queue threshold value."
::= { f3L3QosShaperEntry 15 }
f3L3QosShaperWredYellowDropProbability OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Wred yellow packet drop probability."
::= { f3L3QosShaperEntry 16 }
f3L3QosShaperStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3QosShaperEntry 17 }
f3L3QosShaperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L3QosShaperRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L3QosShaperRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L3QosShaperRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L3QosShaperEntry 18 }
--
-- L3 traffic ip interface Table
--
f3L3TrafficIPInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3TrafficIPInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the L3 Traffic IP Interface."
::= { f3L3Objects 9 }
f3L3TrafficIPInterfaceEntry OBJECT-TYPE
SYNTAX F3L3TrafficIPInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3TrafficIPInterfaceTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex }
::= { f3L3TrafficIPInterfaceTable 1 }
F3L3TrafficIPInterfaceEntry ::= SEQUENCE {
f3L3TrafficIPIfIndex Integer32,
f3L3TrafficIPIfName DisplayString,
f3L3TrafficIPIfAdminState AdminState,
f3L3TrafficIPIfSecondaryState SecondaryState,
f3L3TrafficIPIfOperationalState OperationalState,
f3L3TrafficIPIfProxyArpEnabled TruthValue,
f3L3TrafficIPIfIpAddressSourceType IfIpAddressSourceType,
f3L3TrafficIPIfMgmtUseEnable TruthValue,
f3L3TrafficIPIfIpAddress IpAddress,
f3L3TrafficIPIfMask IpAddress,
f3L3TrafficIPIfDhcpRelayInterfaceSide DhcpRelayInterfaceSide,
f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60 DisplayString,
f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control TruthValue,
f3L3TrafficIPIfDhcpRelayUserClassOpt77 DisplayString,
f3L3TrafficIPIfDhcpRelayUserClassOpt77Control TruthValue,
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1 DisplayString,
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled TruthValue,
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2 DisplayString,
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled TruthValue,
f3L3TrafficIPIfDhcpEnabled TruthValue,
f3L3TrafficIPIfDhcpRole CmDhcpRole,
f3L3TrafficIPIfDhcpClientIdEnabled TruthValue,
f3L3TrafficIPIfDhcpClientId DisplayString,
f3L3TrafficIPIfDhcpClassIdEnabled TruthValue,
f3L3TrafficIPIfDhcpHostNameEnabled TruthValue,
f3L3TrafficIPIfDhcpHostName DisplayString,
f3L3TrafficIPIfDhcpClientIdType DHCPCIDType,
f3L3TrafficIPIfDhcpHostNameType DHCPHostNameType,
f3L3TrafficIPIfStorageType StorageType,
f3L3TrafficIPIfRowStatus RowStatus,
f3L3TrafficIPIfAction AffectiveArpActionType
}
f3L3TrafficIPIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It specifies the traffic IP interface number."
::= { f3L3TrafficIPInterfaceEntry 1 }
f3L3TrafficIPIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic IP interface name."
::= { f3L3TrafficIPInterfaceEntry 2 }
f3L3TrafficIPIfAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Administrative State of the interface."
::= { f3L3TrafficIPInterfaceEntry 3 }
f3L3TrafficIPIfSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Secondary State of the interface."
::= { f3L3TrafficIPInterfaceEntry 4 }
f3L3TrafficIPIfOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Operational State of the interface."
::= { f3L3TrafficIPInterfaceEntry 5 }
f3L3TrafficIPIfProxyArpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls poxy ARP on this interface."
::= { f3L3TrafficIPInterfaceEntry 6 }
f3L3TrafficIPIfIpAddressSourceType OBJECT-TYPE
SYNTAX IfIpAddressSourceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the IP address source type."
::= { f3L3TrafficIPInterfaceEntry 7 }
f3L3TrafficIPIfMgmtUseEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute is used for controlling use of interface for management.
If enabled the NE can be managed through this interface."
::= { f3L3TrafficIPInterfaceEntry 8 }
f3L3TrafficIPIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of the interface."
::= { f3L3TrafficIPInterfaceEntry 9 }
f3L3TrafficIPIfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address mask of the interface."
::= { f3L3TrafficIPInterfaceEntry 10 }
f3L3TrafficIPIfDhcpRelayInterfaceSide OBJECT-TYPE
SYNTAX DhcpRelayInterfaceSide
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents interface side."
::= { f3L3TrafficIPInterfaceEntry 11 }
f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Option 60 value used for association of received
DHCP message with Traffic IP Interface ."
::= { f3L3TrafficIPInterfaceEntry 12 }
f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Attribute is used to control inspection of
DHCP option 60 presence in the DHCP messages received
on Client Side Traffic IP Interface."
::= { f3L3TrafficIPInterfaceEntry 13 }
f3L3TrafficIPIfDhcpRelayUserClassOpt77 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Option 77 value used for association of received
DHCP message with Traffic IP Interface ."
::= { f3L3TrafficIPInterfaceEntry 14 }
f3L3TrafficIPIfDhcpRelayUserClassOpt77Control OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Attribute is used to control inspection of
DHCP option 77 presence in the DHCP messages received
on Client Side Traffic IP Interface."
::= { f3L3TrafficIPInterfaceEntry 15 }
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Option 82 sub option 1 value."
::= { f3L3TrafficIPInterfaceEntry 16 }
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Attribute is used to control inspection of
DHCP option 82 sub option 1 presence in the DHCP messages received
on Client Side Traffic IP Interface."
::= { f3L3TrafficIPInterfaceEntry 17 }
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Option 82 sub option 2 value."
::= { f3L3TrafficIPInterfaceEntry 18 }
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Attribute is used to control inspection of
DHCP option 82 sub option 2 presence in the DHCP messages received
on Client Side Traffic IP Interface."
::= { f3L3TrafficIPInterfaceEntry 19 }
f3L3TrafficIPIfDhcpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not DHCP is enabled on this interface."
::= { f3L3TrafficIPInterfaceEntry 20 }
f3L3TrafficIPIfDhcpRole OBJECT-TYPE
SYNTAX CmDhcpRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the DHCP role on this interface."
::= { f3L3TrafficIPInterfaceEntry 21 }
f3L3TrafficIPIfDhcpClientIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not DHCP client id enabled."
::= { f3L3TrafficIPInterfaceEntry 22 }
f3L3TrafficIPIfDhcpClientId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the DHCP Cliend ID value."
::= { f3L3TrafficIPInterfaceEntry 23 }
f3L3TrafficIPIfDhcpClassIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not DHCP class id enabled."
::= { f3L3TrafficIPInterfaceEntry 24 }
f3L3TrafficIPIfDhcpHostNameEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not DHCP host name enabled."
::= { f3L3TrafficIPInterfaceEntry 25 }
f3L3TrafficIPIfDhcpHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP host name value."
::= { f3L3TrafficIPInterfaceEntry 26 }
f3L3TrafficIPIfDhcpClientIdType OBJECT-TYPE
SYNTAX DHCPCIDType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp cid type."
::= { f3L3TrafficIPInterfaceEntry 27 }
f3L3TrafficIPIfDhcpHostNameType OBJECT-TYPE
SYNTAX DHCPHostNameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp host name type."
::= { f3L3TrafficIPInterfaceEntry 28 }
f3L3TrafficIPIfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3TrafficIPInterfaceEntry 29 }
f3L3TrafficIPIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L3TrafficIPIfRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L3TrafficIPIfRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L3TrafficIPIfRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L3TrafficIPInterfaceEntry 30 }
f3L3TrafficIPIfAction OBJECT-TYPE
SYNTAX AffectiveArpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects describes action set on this traffic ip interface."
::= { f3L3TrafficIPInterfaceEntry 31 }
--
--
--
f3DhcpRelayAgentTrafficIpIfMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3DhcpRelayAgentTrafficIpIfMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the Dhcp Relay Agent Traffic Ip Interface member."
::= { f3L3Objects 10 }
f3DhcpRelayAgentTrafficIpIfMemberEntry OBJECT-TYPE
SYNTAX F3DhcpRelayAgentTrafficIpIfMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable."
INDEX { neIndex, f3DhcpRelayAgentIndex, f3DhcpRelayAgentTrafficIpIfMemberObject }
::= { f3DhcpRelayAgentTrafficIpIfMemberTable 1 }
F3DhcpRelayAgentTrafficIpIfMemberEntry ::= SEQUENCE {
f3DhcpRelayAgentTrafficIpIfMemberObject VariablePointer,
f3DhcpRelayAgentTrafficIpIfMemberStorageType StorageType,
f3DhcpRelayAgentTrafficIpIfMemberRowStatus RowStatus
}
f3DhcpRelayAgentTrafficIpIfMemberObject OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes the traffic ip interface."
::= { f3DhcpRelayAgentTrafficIpIfMemberEntry 1 }
f3DhcpRelayAgentTrafficIpIfMemberStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3DhcpRelayAgentTrafficIpIfMemberEntry 2 }
f3DhcpRelayAgentTrafficIpIfMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3DhcpRelayAgentTrafficIpIfMemberRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3DhcpRelayAgentTrafficIpIfMemberRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3DhcpRelayAgentTrafficIpIfMemberRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3DhcpRelayAgentTrafficIpIfMemberEntry 3 }
---
---
---
f3VrfTrafficIpIfMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3VrfTrafficIpIfMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the Vrf Traffic Ip Interface member."
::= { f3L3Objects 11 }
f3VrfTrafficIpIfMemberEntry OBJECT-TYPE
SYNTAX F3VrfTrafficIpIfMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable."
INDEX { neIndex, f3VrfIndex, f3VrfTrafficIpIfMemberObject }
::= { f3VrfTrafficIpIfMemberTable 1 }
F3VrfTrafficIpIfMemberEntry ::= SEQUENCE {
f3VrfTrafficIpIfMemberObject VariablePointer,
f3VrfTrafficIpIfMemberStorageType StorageType,
f3VrfTrafficIpIfMemberRowStatus RowStatus
}
f3VrfTrafficIpIfMemberObject OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes the traffic ip interface."
::= { f3VrfTrafficIpIfMemberEntry 1 }
f3VrfTrafficIpIfMemberStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3VrfTrafficIpIfMemberEntry 2 }
f3VrfTrafficIpIfMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3VrfTrafficIpIfMemberRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3VrfTrafficIpIfMemberRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3VrfTrafficIpIfMemberRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3VrfTrafficIpIfMemberEntry 3 }
--
-- L3 taffic ipv4 route Table
--
f3L3TrafficIpv4RouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3TrafficIpv4RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the L3 Traffic Ipv4 route.
Must set f3VrfAction as retrieveEffectiveRoutes(4) before get data from this table."
::= { f3L3Objects 12 }
f3L3TrafficIpv4RouteEntry OBJECT-TYPE
SYNTAX F3L3TrafficIpv4RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3TrafficIpv4RouteTable."
INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv4RouteDest, f3L3TrafficIpv4RouteMask, f3L3TrafficIpv4RouteNextHop, f3L3TrafficIpv4RouteInterface }
::= { f3L3TrafficIpv4RouteTable 1 }
F3L3TrafficIpv4RouteEntry ::= SEQUENCE {
f3L3TrafficIpv4RouteDest IpAddress,
f3L3TrafficIpv4RouteMask IpAddress,
f3L3TrafficIpv4RouteNextHop IpAddress,
f3L3TrafficIpv4RouteMetric Integer32,
f3L3TrafficIpv4RouteInterface DisplayString,
f3L3TrafficIpv4RouteAdvertise TruthValue,
f3L3TrafficIpv4RouteStatus TrafficIpRouteStatus,
f3L3TrafficIpv4RouteSourceForwardingEnable TruthValue,
f3L3TrafficIpv4RouteFlags RouteFlags,
f3L3TrafficIpv4RouteStorageType StorageType,
f3L3TrafficIpv4RouteRowStatus RowStatus,
f3L3TrafficIpv4RouteType IpEntryType
}
f3L3TrafficIpv4RouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route destination."
::= { f3L3TrafficIpv4RouteEntry 1 }
f3L3TrafficIpv4RouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route mask."
::= { f3L3TrafficIpv4RouteEntry 2 }
f3L3TrafficIpv4RouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route next hop."
::= { f3L3TrafficIpv4RouteEntry 3 }
f3L3TrafficIpv4RouteMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route metric."
::= { f3L3TrafficIpv4RouteEntry 4 }
f3L3TrafficIpv4RouteInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route interface."
::= { f3L3TrafficIpv4RouteEntry 5 }
f3L3TrafficIpv4RouteAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route advertise."
::= { f3L3TrafficIpv4RouteEntry 6 }
f3L3TrafficIpv4RouteStatus OBJECT-TYPE
SYNTAX TrafficIpRouteStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route status."
::= { f3L3TrafficIpv4RouteEntry 7 }
f3L3TrafficIpv4RouteSourceForwardingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route source forwarding whether enabled."
::= { f3L3TrafficIpv4RouteEntry 8 }
f3L3TrafficIpv4RouteFlags OBJECT-TYPE
SYNTAX RouteFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It specifies the traffic Ipv4 route flags."
::= { f3L3TrafficIpv4RouteEntry 9 }
f3L3TrafficIpv4RouteStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3TrafficIpv4RouteEntry 10 }
f3L3TrafficIpv4RouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3L3TrafficIpv4RouteRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3L3TrafficIpv4RouteRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3L3TrafficIpv4RouteRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3L3TrafficIpv4RouteEntry 11 }
f3L3TrafficIpv4RouteType OBJECT-TYPE
SYNTAX IpEntryType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It specifies the route is dynamic or static."
::= { f3L3TrafficIpv4RouteEntry 12 }
--
-- L3 Traffic Arp Table
--
f3L3TrafficArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3TrafficArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Traffic ARP entries on the NIDs.
Must set f3L3TrafficIPIfAction as retrieveAffectiveArp (1) before get data from this table."
::= { f3L3Objects 13 }
f3L3TrafficArpEntry OBJECT-TYPE
SYNTAX F3L3TrafficArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3TrafficArpTable. Entries can
be created/deleted in this table by management application action."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficArpIPAddress }
::= { f3L3TrafficArpTable 1 }
F3L3TrafficArpEntry ::= SEQUENCE {
f3L3TrafficArpIPAddress IpAddress,
f3L3TrafficArpMacAddress MacAddress,
f3L3TrafficArpInterface DisplayString,
f3L3TrafficArpEntryType IpEntryType,
f3L3TrafficArpStorageType StorageType,
f3L3TrafficArpRowStatus RowStatus
}
f3L3TrafficArpIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object allows configuration of the ARP Entry IP Address."
::= { f3L3TrafficArpEntry 1 }
f3L3TrafficArpMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the ARP Entry MAC Address."
::= { f3L3TrafficArpEntry 2 }
f3L3TrafficArpInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object allows management of the ARP Entry Interface."
::= { f3L3TrafficArpEntry 3 }
f3L3TrafficArpEntryType OBJECT-TYPE
SYNTAX IpEntryType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of ARP Entry. Note that static entries can be created."
::= { f3L3TrafficArpEntry 4 }
f3L3TrafficArpStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3L3TrafficArpEntry 5 }
f3L3TrafficArpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The f3L3TrafficArpRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { f3L3TrafficArpEntry 6 }
---
---
---
---f3VrfTrafficRouteMemberTable OBJECT-TYPE
--- SYNTAX SEQUENCE OF F3VrfTrafficRouteMemberEntry
--- MAX-ACCESS not-accessible
--- STATUS current
--- DESCRIPTION
--- "A list of entries for the Vrf Traffic Route member."
--- ::= { f3L3Objects 15 }
---
---f3VrfTrafficRouteMemberEntry OBJECT-TYPE
--- SYNTAX F3VrfTrafficRouteMemberEntry
--- MAX-ACCESS not-accessible
--- STATUS current
--- DESCRIPTION
--- "A conceptual row in the f3VrfTrafficRouteMemberTable."
--- INDEX { neIndex, f3VrfIndex, f3VrfTrafficRouteMemberObject }
--- ::= { f3VrfTrafficRouteMemberTable 1 }
---
---F3VrfTrafficRouteMemberEntry ::= SEQUENCE {
--- f3VrfTrafficRouteMemberObject VariablePointer
---}
---
---f3VrfTrafficRouteMemberObject OBJECT-TYPE
--- SYNTAX VariablePointer
--- MAX-ACCESS read-only
--- STATUS current
--- DESCRIPTION
--- "This object describes the traffic route object."
--- ::= { f3VrfTrafficRouteMemberEntry 1 }
--
-- L3 flow point Current Statistics Table
--
f3L3FlowPointStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3FlowPointStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 Flow Point related statistics.
These reflect the current data."
::= { f3L3Performance 1 }
f3L3FlowPointStatsEntry OBJECT-TYPE
SYNTAX F3L3FlowPointStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3FlowPointStatsTable.
Entries exist in this table for each L3 flow point."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3FlowPointStatsIndex }
::= { f3L3FlowPointStatsTable 1 }
F3L3FlowPointStatsEntry ::= SEQUENCE {
f3L3FlowPointStatsIndex Integer32,
f3L3FlowPointStatsIntervalType CmPmIntervalType,
f3L3FlowPointStatsValid TruthValue,
f3L3FlowPointStatsAction CmPmBinAction,
f3L3FlowPointStatsFMG PerfCounter64,
f3L3FlowPointStatsFMY PerfCounter64,
f3L3FlowPointStatsFMRD PerfCounter64,
f3L3FlowPointStatsFTD PerfCounter64,
f3L3FlowPointStatsFragmentedDropAcl PerfCounter64,
f3L3FlowPointStatsAclRuleDrop PerfCounter64,
f3L3FlowPointStatsTtlEqual1Drop PerfCounter64,
f3L3FlowPointStatsFrameTx PerfCounter64,
f3L3FlowPointStatsFrameRx PerfCounter64,
f3L3FlowPointStatsNoRouteDrop PerfCounter64
}
f3L3FlowPointStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3FlowPointStatsEntry 1 }
f3L3FlowPointStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L3FlowPointStatsEntry 2 }
f3L3FlowPointStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3FlowPointStatsEntry 3 }
f3L3FlowPointStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3FlowPointStatsEntry 4 }
f3L3FlowPointStatsFMG OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Marked Green."
::= { f3L3FlowPointStatsEntry 5 }
f3L3FlowPointStatsFMY OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Marked Yellow."
::= { f3L3FlowPointStatsEntry 6 }
f3L3FlowPointStatsFMRD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Marked Red and Discarded."
::= { f3L3FlowPointStatsEntry 7 }
f3L3FlowPointStatsFTD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Tail Dropped."
::= { f3L3FlowPointStatsEntry 8 }
f3L3FlowPointStatsFragmentedDropAcl OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped fragmented packets."
::= { f3L3FlowPointStatsEntry 9 }
f3L3FlowPointStatsAclRuleDrop OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets due to ACL rule."
::= { f3L3FlowPointStatsEntry 10 }
f3L3FlowPointStatsTtlEqual1Drop OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of dropped packets due to ttl's value is 1."
::= { f3L3FlowPointStatsEntry 11 }
f3L3FlowPointStatsFrameTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total transmitted frames."
::= { f3L3FlowPointStatsEntry 12 }
f3L3FlowPointStatsFrameRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of total received frames."
::= { f3L3FlowPointStatsEntry 13 }
f3L3FlowPointStatsNoRouteDrop OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of frames drop due to no route."
::= { f3L3FlowPointStatsEntry 14 }
--
-- L3 flow point history Statistics Table
--
f3L3FlowPointHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3FlowPointHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 Flow Point related statistics.
These reflect the current data."
::= { f3L3Performance 2 }
f3L3FlowPointHistoryEntry OBJECT-TYPE
SYNTAX F3L3FlowPointHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3FlowPointHistoryTable.
Entries exist in this table for each L3 flow point."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3FlowPointStatsIndex, f3L3FlowPointHistoryIndex }
::= { f3L3FlowPointHistoryTable 1 }
F3L3FlowPointHistoryEntry ::= SEQUENCE {
f3L3FlowPointHistoryIndex Integer32,
f3L3FlowPointHistoryTime DateAndTime,
f3L3FlowPointHistoryValid TruthValue,
f3L3FlowPointHistoryAction CmPmBinAction,
f3L3FlowPointHistoryFMG PerfCounter64,
f3L3FlowPointHistoryFMY PerfCounter64,
f3L3FlowPointHistoryFMRD PerfCounter64,
f3L3FlowPointHistoryFTD PerfCounter64,
f3L3FlowPointHistoryFragmentedDropAcl PerfCounter64,
f3L3FlowPointHistoryAclRuleDrop PerfCounter64,
f3L3FlowPointHistoryTtlEqual1Drop PerfCounter64,
f3L3FlowPointHistoryFrameTx PerfCounter64,
f3L3FlowPointHistoryFrameRx PerfCounter64,
f3L3FlowPointHistoryNoRouteDrop PerfCounter64
}
f3L3FlowPointHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3FlowPointHistoryEntry 1 }
f3L3FlowPointHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L3FlowPointHistoryEntry 2 }
f3L3FlowPointHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3FlowPointHistoryEntry 3 }
f3L3FlowPointHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3FlowPointHistoryEntry 4 }
f3L3FlowPointHistoryFMG OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Marked Green."
::= { f3L3FlowPointHistoryEntry 5 }
f3L3FlowPointHistoryFMY OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Marked Yellow."
::= { f3L3FlowPointHistoryEntry 6 }
f3L3FlowPointHistoryFMRD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Marked Red and Discarded."
::= { f3L3FlowPointHistoryEntry 7 }
f3L3FlowPointHistoryFTD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frames Tail Dropped."
::= { f3L3FlowPointHistoryEntry 8 }
f3L3FlowPointHistoryFragmentedDropAcl OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped fragmented packets."
::= { f3L3FlowPointHistoryEntry 9 }
f3L3FlowPointHistoryAclRuleDrop OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets due to ACL rule."
::= { f3L3FlowPointHistoryEntry 10 }
f3L3FlowPointHistoryTtlEqual1Drop OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of dropped packets due to ttl's value is 1."
::= { f3L3FlowPointHistoryEntry 11 }
f3L3FlowPointHistoryFrameTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total transmitted frames."
::= { f3L3FlowPointHistoryEntry 12 }
f3L3FlowPointHistoryFrameRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of total recieved frames."
::= { f3L3FlowPointHistoryEntry 13 }
f3L3FlowPointHistoryNoRouteDrop OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of frames dropped due to no route."
::= { f3L3FlowPointHistoryEntry 14 }
--
-- L3 Flow Point Threshold Table
--
f3L3FlowPointThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3FlowPointThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of L3 Flow Point Thresholds."
::= { f3L3Performance 3 }
f3L3FlowPointThresholdEntry OBJECT-TYPE
SYNTAX F3L3FlowPointThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3FlowPointThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3FlowPointStatsIndex, f3L3FlowPointThresholdIndex }
::= { f3L3FlowPointThresholdTable 1 }
F3L3FlowPointThresholdEntry ::= SEQUENCE {
f3L3FlowPointThresholdIndex Integer32,
f3L3FlowPointThresholdInterval CmPmIntervalType,
f3L3FlowPointThresholdVariable VariablePointer,
f3L3FlowPointThresholdValueLo Unsigned32,
f3L3FlowPointThresholdValueHi Unsigned32,
f3L3FlowPointThresholdMonValue Counter64
}
f3L3FlowPointThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L3FlowPointThresholdTable."
::= { f3L3FlowPointThresholdEntry 1 }
f3L3FlowPointThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L3FlowPointThresholdEntry 2 }
f3L3FlowPointThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L3FlowPointThresholdEntry 3 }
f3L3FlowPointThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L3FlowPointThresholdEntry 4 }
f3L3FlowPointThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L3FlowPointThresholdEntry 5 }
f3L3FlowPointThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L3FlowPointThresholdVariable."
::= { f3L3FlowPointThresholdEntry 6 }
--
-- L3 traffic ip interface Current Statistics Table
--
f3L3TrafficIpInterfaceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3TrafficIpInterfaceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 traffic ip interface related statistics.
These reflect the current data."
::= { f3L3Performance 4 }
f3L3TrafficIpInterfaceStatsEntry OBJECT-TYPE
SYNTAX F3L3TrafficIpInterfaceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3TrafficIpInterfaceStatsTable.
Entries exist in this table for each L3 traffic ip interface."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficIpInterfaceStatsIndex }
::= { f3L3TrafficIpInterfaceStatsTable 1 }
F3L3TrafficIpInterfaceStatsEntry ::= SEQUENCE {
f3L3TrafficIpInterfaceStatsIndex Integer32,
f3L3TrafficIpInterfaceStatsIntervalType CmPmIntervalType,
f3L3TrafficIpInterfaceStatsValid TruthValue,
f3L3TrafficIpInterfaceStatsAction CmPmBinAction,
f3L3TrafficIpInterfaceStatsDhcpTx PerfCounter64,
f3L3TrafficIpInterfaceStatsDhcpRx PerfCounter64,
f3L3TrafficIpInterfaceStatsIcmpTx PerfCounter64,
f3L3TrafficIpInterfaceStatsIcmpRx PerfCounter64,
f3L3TrafficIpInterfaceStatsArpReqTx PerfCounter64,
f3L3TrafficIpInterfaceStatsArpReqRx PerfCounter64,
f3L3TrafficIpInterfaceStatsArpReplyTx PerfCounter64,
f3L3TrafficIpInterfaceStatsArpReplyRx PerfCounter64
}
f3L3TrafficIpInterfaceStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3TrafficIpInterfaceStatsEntry 1 }
f3L3TrafficIpInterfaceStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L3TrafficIpInterfaceStatsEntry 2 }
f3L3TrafficIpInterfaceStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3TrafficIpInterfaceStatsEntry 3 }
f3L3TrafficIpInterfaceStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3TrafficIpInterfaceStatsEntry 4 }
f3L3TrafficIpInterfaceStatsDhcpTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets DHCP Transmit."
::= { f3L3TrafficIpInterfaceStatsEntry 5 }
f3L3TrafficIpInterfaceStatsDhcpRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets DHCP Recieved."
::= { f3L3TrafficIpInterfaceStatsEntry 6 }
f3L3TrafficIpInterfaceStatsIcmpTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets Icmp protocol transmit."
::= { f3L3TrafficIpInterfaceStatsEntry 7 }
f3L3TrafficIpInterfaceStatsIcmpRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets Icmp protocol recieved."
::= { f3L3TrafficIpInterfaceStatsEntry 8 }
f3L3TrafficIpInterfaceStatsArpReqTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit packets due to ARP request."
::= { f3L3TrafficIpInterfaceStatsEntry 9 }
f3L3TrafficIpInterfaceStatsArpReqRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of recieved packets due to ARP request."
::= { f3L3TrafficIpInterfaceStatsEntry 10 }
f3L3TrafficIpInterfaceStatsArpReplyTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit packets due to ARP reply."
::= { f3L3TrafficIpInterfaceStatsEntry 11 }
f3L3TrafficIpInterfaceStatsArpReplyRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of recieved packets due to ARP reply."
::= { f3L3TrafficIpInterfaceStatsEntry 12 }
--
-- L3 traffic ip interface history Statistics Table
--
f3L3TrafficIpInterfaceHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3TrafficIpInterfaceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 traffic ip interface related history statistics.
These reflect the history data."
::= { f3L3Performance 5 }
f3L3TrafficIpInterfaceHistoryEntry OBJECT-TYPE
SYNTAX F3L3TrafficIpInterfaceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3TrafficIpInterfaceHistoryTable.
Entries exist in this table for each L3 traffic ip interface."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex,
f3L3TrafficIpInterfaceStatsIndex, f3L3TrafficIpInterfaceHistoryIndex }
::= { f3L3TrafficIpInterfaceHistoryTable 1 }
F3L3TrafficIpInterfaceHistoryEntry ::= SEQUENCE {
f3L3TrafficIpInterfaceHistoryIndex Integer32,
f3L3TrafficIpInterfaceHistoryTime DateAndTime,
f3L3TrafficIpInterfaceHistoryValid TruthValue,
f3L3TrafficIpInterfaceHistoryAction CmPmBinAction,
f3L3TrafficIpInterfaceHistoryDhcpTx PerfCounter64,
f3L3TrafficIpInterfaceHistoryDhcpRx PerfCounter64,
f3L3TrafficIpInterfaceHistoryIcmpTx PerfCounter64,
f3L3TrafficIpInterfaceHistoryIcmpRx PerfCounter64,
f3L3TrafficIpInterfaceHistoryArpReqTx PerfCounter64,
f3L3TrafficIpInterfaceHistoryArpReqRx PerfCounter64,
f3L3TrafficIpInterfaceHistoryArpReplyTx PerfCounter64,
f3L3TrafficIpInterfaceHistoryArpReplyRx PerfCounter64
}
f3L3TrafficIpInterfaceHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3TrafficIpInterfaceHistoryEntry 1 }
f3L3TrafficIpInterfaceHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L3TrafficIpInterfaceHistoryEntry 2 }
f3L3TrafficIpInterfaceHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3TrafficIpInterfaceHistoryEntry 3 }
f3L3TrafficIpInterfaceHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3TrafficIpInterfaceHistoryEntry 4 }
f3L3TrafficIpInterfaceHistoryDhcpTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets DHCP Transmit."
::= { f3L3TrafficIpInterfaceHistoryEntry 5 }
f3L3TrafficIpInterfaceHistoryDhcpRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets DHCP Recieved."
::= { f3L3TrafficIpInterfaceHistoryEntry 6 }
f3L3TrafficIpInterfaceHistoryIcmpTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets Icmp protocol transmit."
::= { f3L3TrafficIpInterfaceHistoryEntry 7 }
f3L3TrafficIpInterfaceHistoryIcmpRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets Icmp protocol recieved."
::= { f3L3TrafficIpInterfaceHistoryEntry 8 }
f3L3TrafficIpInterfaceHistoryArpReqTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit packets due to ARP request."
::= { f3L3TrafficIpInterfaceHistoryEntry 9 }
f3L3TrafficIpInterfaceHistoryArpReqRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of recieved packets due to ARP request."
::= { f3L3TrafficIpInterfaceHistoryEntry 10 }
f3L3TrafficIpInterfaceHistoryArpReplyTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit packets due to ARP reply."
::= { f3L3TrafficIpInterfaceHistoryEntry 11 }
f3L3TrafficIpInterfaceHistoryArpReplyRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the number of recieved packets due to ARP reply."
::= { f3L3TrafficIpInterfaceHistoryEntry 12 }
--
-- L3 traffic ip interface Threshold Table
--
f3L3TrafficIpInterfaceThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3TrafficIpInterfaceThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of L3 traffic ip interface Thresholds."
::= { f3L3Performance 6 }
f3L3TrafficIpInterfaceThresholdEntry OBJECT-TYPE
SYNTAX F3L3TrafficIpInterfaceThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3TrafficIpInterfaceThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex,
f3L3TrafficIpInterfaceStatsIndex, f3L3TrafficIpInterfaceThresholdIndex }
::= { f3L3TrafficIpInterfaceThresholdTable 1 }
F3L3TrafficIpInterfaceThresholdEntry ::= SEQUENCE {
f3L3TrafficIpInterfaceThresholdIndex Integer32,
f3L3TrafficIpInterfaceThresholdInterval CmPmIntervalType,
f3L3TrafficIpInterfaceThresholdVariable VariablePointer,
f3L3TrafficIpInterfaceThresholdValueLo Unsigned32,
f3L3TrafficIpInterfaceThresholdValueHi Unsigned32,
f3L3TrafficIpInterfaceThresholdMonValue Counter64
}
f3L3TrafficIpInterfaceThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L3TrafficIpInterfaceThresholdTable."
::= { f3L3TrafficIpInterfaceThresholdEntry 1 }
f3L3TrafficIpInterfaceThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L3TrafficIpInterfaceThresholdEntry 2 }
f3L3TrafficIpInterfaceThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L3TrafficIpInterfaceThresholdEntry 3 }
f3L3TrafficIpInterfaceThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L3TrafficIpInterfaceThresholdEntry 4 }
f3L3TrafficIpInterfaceThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L3TrafficIpInterfaceThresholdEntry 5 }
f3L3TrafficIpInterfaceThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L3TrafficIpInterfaceThresholdVariable."
::= { f3L3TrafficIpInterfaceThresholdEntry 6 }
--
-- L3 acl rule Current Statistics Table
--
f3L3AclRuleStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3AclRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 acl rule related statistics.
These reflect the current data."
::= { f3L3Performance 7 }
f3L3AclRuleStatsEntry OBJECT-TYPE
SYNTAX F3L3AclRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3AclRuleStatsTable.
Entries exist in this table for each Acl rule."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex, f3L3AclRuleStatsIndex }
::= { f3L3AclRuleStatsTable 1 }
F3L3AclRuleStatsEntry ::= SEQUENCE {
f3L3AclRuleStatsIndex Integer32,
f3L3AclRuleStatsIntervalType CmPmIntervalType,
f3L3AclRuleStatsValid TruthValue,
f3L3AclRuleStatsAction CmPmBinAction,
f3L3AclRuleStatsRuleMatch PerfCounter64
}
f3L3AclRuleStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3AclRuleStatsEntry 1 }
f3L3AclRuleStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L3AclRuleStatsEntry 2 }
f3L3AclRuleStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3AclRuleStatsEntry 3 }
f3L3AclRuleStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3AclRuleStatsEntry 4 }
f3L3AclRuleStatsRuleMatch OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets matching the ACL rule."
::= { f3L3AclRuleStatsEntry 5 }
--
-- L3 acl rule history Statistics Table
--
f3L3AclRuleHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3AclRuleHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 acl rule related history statistics.
These reflect the history data."
::= { f3L3Performance 8 }
f3L3AclRuleHistoryEntry OBJECT-TYPE
SYNTAX F3L3AclRuleHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3AclRuleHistoryTable.
Entries exist in this table for each L3 acl rule."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex,
f3L3AclRuleStatsIndex, f3L3AclRuleHistoryIndex }
::= { f3L3AclRuleHistoryTable 1 }
F3L3AclRuleHistoryEntry ::= SEQUENCE {
f3L3AclRuleHistoryIndex Integer32,
f3L3AclRuleHistoryTime DateAndTime,
f3L3AclRuleHistoryValid TruthValue,
f3L3AclRuleHistoryAction CmPmBinAction,
f3L3AclRuleHistoryRuleMatch PerfCounter64
}
f3L3AclRuleHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3AclRuleHistoryEntry 1 }
f3L3AclRuleHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L3AclRuleHistoryEntry 2 }
f3L3AclRuleHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3AclRuleHistoryEntry 3 }
f3L3AclRuleHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3AclRuleHistoryEntry 4 }
f3L3AclRuleHistoryRuleMatch OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets matching acl rule."
::= { f3L3AclRuleHistoryEntry 5 }
--
-- L3 acl rule Threshold Table
--
f3L3AclRuleThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3AclRuleThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of L3 acl rule Thresholds."
::= { f3L3Performance 9 }
f3L3AclRuleThresholdEntry OBJECT-TYPE
SYNTAX F3L3AclRuleThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3AclRuleThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex,
f3L3AclRuleStatsIndex, f3L3AclRuleThresholdIndex }
::= { f3L3AclRuleThresholdTable 1 }
F3L3AclRuleThresholdEntry ::= SEQUENCE {
f3L3AclRuleThresholdIndex Integer32,
f3L3AclRuleThresholdInterval CmPmIntervalType,
f3L3AclRuleThresholdVariable VariablePointer,
f3L3AclRuleThresholdValueLo Unsigned32,
f3L3AclRuleThresholdValueHi Unsigned32,
f3L3AclRuleThresholdMonValue Counter64
}
f3L3AclRuleThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L3AclRuleThresholdTable."
::= { f3L3AclRuleThresholdEntry 1 }
f3L3AclRuleThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L3AclRuleThresholdEntry 2 }
f3L3AclRuleThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L3AclRuleThresholdEntry 3 }
f3L3AclRuleThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L3AclRuleThresholdEntry 4 }
f3L3AclRuleThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L3AclRuleThresholdEntry 5 }
f3L3AclRuleThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L3AclRuleThresholdVariable."
::= { f3L3AclRuleThresholdEntry 6 }
--
-- Quality of Service(QOS) Policer Current Statistics Table
--
f3L3QosPolicerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosPolicerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of QOS Policer statistics.
These reflect the current data."
::= { f3L3Performance 10 }
f3L3QosPolicerStatsEntry OBJECT-TYPE
SYNTAX F3L3QosPolicerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosPolicerStatsTable.
Entries exist in this table for each l3 flow point policer."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex,
f3L3QosPolicerStatsIndex }
::= { f3L3QosPolicerStatsTable 1 }
F3L3QosPolicerStatsEntry ::= SEQUENCE {
f3L3QosPolicerStatsIndex Integer32,
f3L3QosPolicerStatsIntervalType CmPmIntervalType,
f3L3QosPolicerStatsValid TruthValue,
f3L3QosPolicerStatsAction CmPmBinAction,
f3L3QosPolicerStatsFMG PerfCounter64,
f3L3QosPolicerStatsFMY PerfCounter64,
f3L3QosPolicerStatsFMYD PerfCounter64,
f3L3QosPolicerStatsFMRD PerfCounter64,
f3L3QosPolicerStatsBytesIn PerfCounter64,
f3L3QosPolicerStatsBytesOut PerfCounter64,
f3L3QosPolicerStatsABR PerfCounter64
}
f3L3QosPolicerStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
this QOS Policer statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3QosPolicerStatsEntry 1 }
f3L3QosPolicerStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L3QosPolicerStatsEntry 2 }
f3L3QosPolicerStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3QosPolicerStatsEntry 3 }
f3L3QosPolicerStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3QosPolicerStatsEntry 4 }
f3L3QosPolicerStatsFMG OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Marked Green."
::= { f3L3QosPolicerStatsEntry 5 }
f3L3QosPolicerStatsFMY OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Marked Yellow."
::= { f3L3QosPolicerStatsEntry 6 }
f3L3QosPolicerStatsFMYD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Frames Marked Yellow and Dropped."
::= { f3L3QosPolicerStatsEntry 7 }
f3L3QosPolicerStatsFMRD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Marked Red and Discarded."
::= { f3L3QosPolicerStatsEntry 8 }
f3L3QosPolicerStatsBytesIn OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes received by the Policer."
::= { f3L3QosPolicerStatsEntry 9 }
f3L3QosPolicerStatsBytesOut OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes transmitted by the Policer."
::= { f3L3QosPolicerStatsEntry 10 }
f3L3QosPolicerStatsABR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Bit Rate on the Policer."
::= { f3L3QosPolicerStatsEntry 11 }
--
-- Quality of Service(QOS) Policer History Statistics Table
--
f3L3QosPolicerHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosPolicerHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of QOS Policer statistics.
These reflect the current data."
::= { f3L3Performance 11 }
f3L3QosPolicerHistoryEntry OBJECT-TYPE
SYNTAX F3L3QosPolicerHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosPolicerHistoryTable.
Entries exist in this table for each flow point policer."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex,
f3L3QosPolicerStatsIndex, f3L3QosPolicerHistoryIndex }
::= { f3L3QosPolicerHistoryTable 1 }
F3L3QosPolicerHistoryEntry ::= SEQUENCE {
f3L3QosPolicerHistoryIndex Integer32,
f3L3QosPolicerHistoryTime DateAndTime,
f3L3QosPolicerHistoryValid TruthValue,
f3L3QosPolicerHistoryAction CmPmBinAction,
f3L3QosPolicerHistoryFMG PerfCounter64,
f3L3QosPolicerHistoryFMY PerfCounter64,
f3L3QosPolicerHistoryFMYD PerfCounter64,
f3L3QosPolicerHistoryFMRD PerfCounter64,
f3L3QosPolicerHistoryBytesIn PerfCounter64,
f3L3QosPolicerHistoryBytesOut PerfCounter64,
f3L3QosPolicerHistoryABR PerfCounter64
}
f3L3QosPolicerHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this QOS Policer history entry."
::= { f3L3QosPolicerHistoryEntry 1 }
f3L3QosPolicerHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L3QosPolicerHistoryEntry 2 }
f3L3QosPolicerHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3QosPolicerHistoryEntry 3 }
f3L3QosPolicerHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3QosPolicerHistoryEntry 4 }
f3L3QosPolicerHistoryFMG OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Marked Green."
::= { f3L3QosPolicerHistoryEntry 5 }
f3L3QosPolicerHistoryFMY OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Marked Yellow."
::= { f3L3QosPolicerHistoryEntry 6 }
f3L3QosPolicerHistoryFMYD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Frames Marked Yellow and Dropped."
::= { f3L3QosPolicerHistoryEntry 7 }
f3L3QosPolicerHistoryFMRD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Marked Red and Discarded."
::= { f3L3QosPolicerHistoryEntry 8 }
f3L3QosPolicerHistoryBytesIn OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes received by the Policer."
::= { f3L3QosPolicerHistoryEntry 9 }
f3L3QosPolicerHistoryBytesOut OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes transmitted by the Policer."
::= { f3L3QosPolicerHistoryEntry 10 }
f3L3QosPolicerHistoryABR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Bit Rate on the Policer."
::= { f3L3QosPolicerHistoryEntry 11 }
--
-- QOS Policer Threshold Table
--
f3L3QosPolicerThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosPolicerThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of QOS
Policer Thresholds."
::= { f3L3Performance 12 }
f3L3QosPolicerThresholdEntry OBJECT-TYPE
SYNTAX F3L3QosPolicerThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosPolicerThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex,
f3L3QosPolicerStatsIndex, f3L3QosPolicerThresholdIndex }
::= { f3L3QosPolicerThresholdTable 1 }
F3L3QosPolicerThresholdEntry ::= SEQUENCE {
f3L3QosPolicerThresholdIndex Integer32,
f3L3QosPolicerThresholdInterval CmPmIntervalType,
f3L3QosPolicerThresholdVariable VariablePointer,
f3L3QosPolicerThresholdValueLo Unsigned32,
f3L3QosPolicerThresholdValueHi Unsigned32,
f3L3QosPolicerThresholdMonValue Counter64
}
f3L3QosPolicerThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L3QosPolicerThresholdTable."
::= { f3L3QosPolicerThresholdEntry 1 }
f3L3QosPolicerThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L3QosPolicerThresholdEntry 2 }
f3L3QosPolicerThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L3QosPolicerThresholdEntry 3 }
f3L3QosPolicerThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L3QosPolicerThresholdEntry 4 }
f3L3QosPolicerThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L3QosPolicerThresholdEntry 5 }
f3L3QosPolicerThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L3QosPolicerThresholdVariable."
::= { f3L3QosPolicerThresholdEntry 6 }
--
-- L3 flow point Level Quality of Service(QOS) Shaper Current Statistics Table
--
f3L3QosShaperStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosShaperStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 flow point Level QOS Shaper statistics.
These reflect the current data."
::= { f3L3Performance 13 }
f3L3QosShaperStatsEntry OBJECT-TYPE
SYNTAX F3L3QosShaperStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosShaperStatsTable.
Entries exist in this table for each QOS Shaper per L3 flow point."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex,
f3L3QosShaperIndex, f3L3QosShaperStatsIndex }
::= { f3L3QosShaperStatsTable 1 }
F3L3QosShaperStatsEntry ::= SEQUENCE {
f3L3QosShaperStatsIndex Integer32,
f3L3QosShaperStatsIntervalType CmPmIntervalType,
f3L3QosShaperStatsValid TruthValue,
f3L3QosShaperStatsAction CmPmBinAction,
f3L3QosShaperStatsBT PerfCounter64,
f3L3QosShaperStatsBTD PerfCounter64,
f3L3QosShaperStatsFD PerfCounter64,
f3L3QosShaperStatsFTD PerfCounter64,
f3L3QosShaperStatsBR PerfCounter64,
f3L3QosShaperStatsFR PerfCounter64,
f3L3QosShaperStatsABRRL PerfCounter64,
f3L3QosShaperStatsABRRLR PerfCounter64,
f3L3QosShaperStatsBREDD PerfCounter64,
f3L3QosShaperStatsFREDD PerfCounter64
}
f3L3QosShaperStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this QOS Shaper statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L3QosShaperStatsEntry 1 }
f3L3QosShaperStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L3QosShaperStatsEntry 2 }
f3L3QosShaperStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3QosShaperStatsEntry 3 }
f3L3QosShaperStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3QosShaperStatsEntry 4 }
f3L3QosShaperStatsBT OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Transmitted."
::= { f3L3QosShaperStatsEntry 5 }
f3L3QosShaperStatsBTD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Tail Dropped."
::= { f3L3QosShaperStatsEntry 6 }
f3L3QosShaperStatsFD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Dequeued."
::= { f3L3QosShaperStatsEntry 7 }
f3L3QosShaperStatsFTD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Tail Dropped."
::= { f3L3QosShaperStatsEntry 8 }
f3L3QosShaperStatsBR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Replicated."
::= { f3L3QosShaperStatsEntry 9 }
f3L3QosShaperStatsFR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Replicated."
::= { f3L3QosShaperStatsEntry 10 }
f3L3QosShaperStatsABRRL OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Bit Rate - Rate Limited."
::= { f3L3QosShaperStatsEntry 11 }
f3L3QosShaperStatsABRRLR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Bit Rate - Rate Limited, Replicated."
::= { f3L3QosShaperStatsEntry 12 }
f3L3QosShaperStatsBREDD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Random Early Discard, Dropped."
::= { f3L3QosShaperStatsEntry 13 }
f3L3QosShaperStatsFREDD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Random Early Discard, Dropped."
::= { f3L3QosShaperStatsEntry 14 }
--
-- Quality of Service(QOS) Shaper History Statistics Table
--
f3L3QosShaperHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosShaperHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of l3 flow point Level QOS Shaper statistics.
These reflect the history data."
::= { f3L3Performance 14 }
f3L3QosShaperHistoryEntry OBJECT-TYPE
SYNTAX F3L3QosShaperHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosShaperHistoryTable.
Entries exist in this table for each Shaper per l3 flow point."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex,
f3L3QosShaperIndex, f3L3QosShaperStatsIndex, f3L3QosShaperHistoryIndex }
::= { f3L3QosShaperHistoryTable 1 }
F3L3QosShaperHistoryEntry ::= SEQUENCE {
f3L3QosShaperHistoryIndex Integer32,
f3L3QosShaperHistoryTime DateAndTime,
f3L3QosShaperHistoryValid TruthValue,
f3L3QosShaperHistoryAction CmPmBinAction,
f3L3QosShaperHistoryBT PerfCounter64,
f3L3QosShaperHistoryBTD PerfCounter64,
f3L3QosShaperHistoryFD PerfCounter64,
f3L3QosShaperHistoryFTD PerfCounter64,
f3L3QosShaperHistoryBR PerfCounter64,
f3L3QosShaperHistoryFR PerfCounter64,
f3L3QosShaperHistoryABRRL PerfCounter64,
f3L3QosShaperHistoryABRRLR PerfCounter64,
f3L3QosShaperHistoryBREDD PerfCounter64,
f3L3QosShaperHistoryFREDD PerfCounter64
}
f3L3QosShaperHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this QOS Shaper statistics entry."
::= { f3L3QosShaperHistoryEntry 1 }
f3L3QosShaperHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L3QosShaperHistoryEntry 2 }
f3L3QosShaperHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L3QosShaperHistoryEntry 3 }
f3L3QosShaperHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L3QosShaperHistoryEntry 4 }
f3L3QosShaperHistoryBT OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Transmitted."
::= { f3L3QosShaperHistoryEntry 5 }
f3L3QosShaperHistoryBTD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Tail Dropped."
::= { f3L3QosShaperHistoryEntry 6 }
f3L3QosShaperHistoryFD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Dequeued."
::= { f3L3QosShaperHistoryEntry 7 }
f3L3QosShaperHistoryFTD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Tail Dropped."
::= { f3L3QosShaperHistoryEntry 8 }
f3L3QosShaperHistoryBR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Replicated."
::= { f3L3QosShaperHistoryEntry 9 }
f3L3QosShaperHistoryFR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Replicated."
::= { f3L3QosShaperHistoryEntry 10 }
f3L3QosShaperHistoryABRRL OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Bit Rate - Rate Limited."
::= { f3L3QosShaperHistoryEntry 11 }
f3L3QosShaperHistoryABRRLR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Bit Rate - Rate Limited, Replicated."
::= { f3L3QosShaperHistoryEntry 12 }
f3L3QosShaperHistoryBREDD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes Random Early Discard, Dropped."
::= { f3L3QosShaperHistoryEntry 13 }
f3L3QosShaperHistoryFREDD OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames Random Early Discard, Dropped."
::= { f3L3QosShaperHistoryEntry 14 }
--
-- L3 flow point QOS Shaper Threshold Table
--
f3L3QosShaperThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L3QosShaperThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of QOS
Shaper Thresholds."
::= { f3L3Performance 15 }
f3L3QosShaperThresholdEntry OBJECT-TYPE
SYNTAX F3L3QosShaperThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L3QosShaperThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex,
f3L3FlowPointPortIndex, f3L3FlowPointIndex,
f3L3QosShaperIndex, f3L3QosShaperStatsIndex,
f3L3QosShaperThresholdIndex }
::= { f3L3QosShaperThresholdTable 1 }
F3L3QosShaperThresholdEntry ::= SEQUENCE {
f3L3QosShaperThresholdIndex Integer32,
f3L3QosShaperThresholdInterval CmPmIntervalType,
f3L3QosShaperThresholdVariable VariablePointer,
f3L3QosShaperThresholdValueLo Unsigned32,
f3L3QosShaperThresholdValueHi Unsigned32,
f3L3QosShaperThresholdMonValue Counter64
}
f3L3QosShaperThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L3QosShaperThresholdTable."
::= { f3L3QosShaperThresholdEntry 1 }
f3L3QosShaperThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L3QosShaperThresholdEntry 2 }
f3L3QosShaperThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L3QosShaperThresholdEntry 3 }
f3L3QosShaperThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L3QosShaperThresholdEntry 4 }
f3L3QosShaperThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L3QosShaperThresholdEntry 5 }
f3L3QosShaperThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L3QosShaperThresholdVariable."
::= { f3L3QosShaperThresholdEntry 6 }
--
-- L3 A2N acl rule Current Statistics Table
--
f3L2A2NAclRuleStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2A2NAclRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 acl rule related statistics.
These reflect the current data."
::= { f3L3Performance 16 }
f3L2A2NAclRuleStatsEntry OBJECT-TYPE
SYNTAX F3L2A2NAclRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2A2NAclRuleStatsTable.
Entries exist in this table for each Acl rule."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex, f3L2A2NAclRuleStatsIndex }
::= { f3L2A2NAclRuleStatsTable 1 }
F3L2A2NAclRuleStatsEntry ::= SEQUENCE {
f3L2A2NAclRuleStatsIndex Integer32,
f3L2A2NAclRuleStatsIntervalType CmPmIntervalType,
f3L2A2NAclRuleStatsValid TruthValue,
f3L2A2NAclRuleStatsAction CmPmBinAction,
f3L2A2NAclRuleStatsRuleMatch PerfCounter64
}
f3L2A2NAclRuleStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L2A2NAclRuleStatsEntry 1 }
f3L2A2NAclRuleStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L2A2NAclRuleStatsEntry 2 }
f3L2A2NAclRuleStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L2A2NAclRuleStatsEntry 3 }
f3L2A2NAclRuleStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L2A2NAclRuleStatsEntry 4 }
f3L2A2NAclRuleStatsRuleMatch OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets matching the ACL rule."
::= { f3L2A2NAclRuleStatsEntry 5 }
--
-- L3 acl rule history Statistics Table
--
f3L2A2NAclRuleHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2A2NAclRuleHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 acl rule related history statistics.
These reflect the history data."
::= { f3L3Performance 17 }
f3L2A2NAclRuleHistoryEntry OBJECT-TYPE
SYNTAX F3L2A2NAclRuleHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2A2NAclRuleHistoryTable.
Entries exist in this table for each L3 acl rule."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex,
f3L2A2NAclRuleStatsIndex, f3L2A2NAclRuleHistoryIndex }
::= { f3L2A2NAclRuleHistoryTable 1 }
F3L2A2NAclRuleHistoryEntry ::= SEQUENCE {
f3L2A2NAclRuleHistoryIndex Integer32,
f3L2A2NAclRuleHistoryTime DateAndTime,
f3L2A2NAclRuleHistoryValid TruthValue,
f3L2A2NAclRuleHistoryAction CmPmBinAction,
f3L2A2NAclRuleHistoryRuleMatch PerfCounter64
}
f3L2A2NAclRuleHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L2A2NAclRuleHistoryEntry 1 }
f3L2A2NAclRuleHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L2A2NAclRuleHistoryEntry 2 }
f3L2A2NAclRuleHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L2A2NAclRuleHistoryEntry 3 }
f3L2A2NAclRuleHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L2A2NAclRuleHistoryEntry 4 }
f3L2A2NAclRuleHistoryRuleMatch OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets matching acl rule."
::= { f3L2A2NAclRuleHistoryEntry 5 }
--
-- L3 acl rule Threshold Table
--
f3L2A2NAclRuleThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2A2NAclRuleThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of L3 acl rule Thresholds."
::= { f3L3Performance 18 }
f3L2A2NAclRuleThresholdEntry OBJECT-TYPE
SYNTAX F3L2A2NAclRuleThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2A2NAclRuleThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex,
f3L2A2NAclRuleStatsIndex, f3L2A2NAclRuleThresholdIndex }
::= { f3L2A2NAclRuleThresholdTable 1 }
F3L2A2NAclRuleThresholdEntry ::= SEQUENCE {
f3L2A2NAclRuleThresholdIndex Integer32,
f3L2A2NAclRuleThresholdInterval CmPmIntervalType,
f3L2A2NAclRuleThresholdVariable VariablePointer,
f3L2A2NAclRuleThresholdValueLo Unsigned32,
f3L2A2NAclRuleThresholdValueHi Unsigned32,
f3L2A2NAclRuleThresholdMonValue Counter64
}
f3L2A2NAclRuleThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L2A2NAclRuleThresholdTable."
::= { f3L2A2NAclRuleThresholdEntry 1 }
f3L2A2NAclRuleThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L2A2NAclRuleThresholdEntry 2 }
f3L2A2NAclRuleThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L2A2NAclRuleThresholdEntry 3 }
f3L2A2NAclRuleThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L2A2NAclRuleThresholdEntry 4 }
f3L2A2NAclRuleThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L2A2NAclRuleThresholdEntry 5 }
f3L2A2NAclRuleThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L2A2NAclRuleThresholdVariable."
::= { f3L2A2NAclRuleThresholdEntry 6 }
--
-- L3 N2A acl rule Current Statistics Table
--
f3L2N2AAclRuleStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2N2AAclRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 acl rule related statistics.
These reflect the current data."
::= { f3L3Performance 19 }
f3L2N2AAclRuleStatsEntry OBJECT-TYPE
SYNTAX F3L2N2AAclRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2N2AAclRuleStatsTable.
Entries exist in this table for each Acl rule."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex, f3L2N2AAclRuleStatsIndex }
::= { f3L2N2AAclRuleStatsTable 1 }
F3L2N2AAclRuleStatsEntry ::= SEQUENCE {
f3L2N2AAclRuleStatsIndex Integer32,
f3L2N2AAclRuleStatsIntervalType CmPmIntervalType,
f3L2N2AAclRuleStatsValid TruthValue,
f3L2N2AAclRuleStatsAction CmPmBinAction,
f3L2N2AAclRuleStatsRuleMatch PerfCounter64
}
f3L2N2AAclRuleStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L2N2AAclRuleStatsEntry 1 }
f3L2N2AAclRuleStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval over which Performance Monitoring data is collected."
::= { f3L2N2AAclRuleStatsEntry 2 }
f3L2N2AAclRuleStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L2N2AAclRuleStatsEntry 3 }
f3L2N2AAclRuleStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L2N2AAclRuleStatsEntry 4 }
f3L2N2AAclRuleStatsRuleMatch OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets matching the ACL rule."
::= { f3L2N2AAclRuleStatsEntry 5 }
--
-- L3 acl rule history Statistics Table
--
f3L2N2AAclRuleHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2N2AAclRuleHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of L3 acl rule related history statistics.
These reflect the history data."
::= { f3L3Performance 20 }
f3L2N2AAclRuleHistoryEntry OBJECT-TYPE
SYNTAX F3L2N2AAclRuleHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2N2AAclRuleHistoryTable.
Entries exist in this table for each L3 acl rule."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex,
f3L2N2AAclRuleStatsIndex, f3L2N2AAclRuleHistoryIndex }
::= { f3L2N2AAclRuleHistoryTable 1 }
F3L2N2AAclRuleHistoryEntry ::= SEQUENCE {
f3L2N2AAclRuleHistoryIndex Integer32,
f3L2N2AAclRuleHistoryTime DateAndTime,
f3L2N2AAclRuleHistoryValid TruthValue,
f3L2N2AAclRuleHistoryAction CmPmBinAction,
f3L2N2AAclRuleHistoryRuleMatch PerfCounter64
}
f3L2N2AAclRuleHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min"
::= { f3L2N2AAclRuleHistoryEntry 1 }
f3L2N2AAclRuleHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3L2N2AAclRuleHistoryEntry 2 }
f3L2N2AAclRuleHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3L2N2AAclRuleHistoryEntry 3 }
f3L2N2AAclRuleHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3L2N2AAclRuleHistoryEntry 4 }
f3L2N2AAclRuleHistoryRuleMatch OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets matching acl rule."
::= { f3L2N2AAclRuleHistoryEntry 5 }
--
-- L3 acl rule Threshold Table
--
f3L2N2AAclRuleThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3L2N2AAclRuleThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of L3 acl rule Thresholds."
::= { f3L3Performance 21 }
f3L2N2AAclRuleThresholdEntry OBJECT-TYPE
SYNTAX F3L2N2AAclRuleThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3L2N2AAclRuleThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex,
f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex,
f3L2N2AAclRuleStatsIndex, f3L2N2AAclRuleThresholdIndex }
::= { f3L2N2AAclRuleThresholdTable 1 }
F3L2N2AAclRuleThresholdEntry ::= SEQUENCE {
f3L2N2AAclRuleThresholdIndex Integer32,
f3L2N2AAclRuleThresholdInterval CmPmIntervalType,
f3L2N2AAclRuleThresholdVariable VariablePointer,
f3L2N2AAclRuleThresholdValueLo Unsigned32,
f3L2N2AAclRuleThresholdValueHi Unsigned32,
f3L2N2AAclRuleThresholdMonValue Counter64
}
f3L2N2AAclRuleThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3L2N2AAclRuleThresholdTable."
::= { f3L2N2AAclRuleThresholdEntry 1 }
f3L2N2AAclRuleThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3L2N2AAclRuleThresholdEntry 2 }
f3L2N2AAclRuleThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3L2N2AAclRuleThresholdEntry 3 }
f3L2N2AAclRuleThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3L2N2AAclRuleThresholdEntry 4 }
f3L2N2AAclRuleThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3L2N2AAclRuleThresholdEntry 5 }
f3L2N2AAclRuleThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3L2N2AAclRuleThresholdVariable."
::= { f3L2N2AAclRuleThresholdEntry 6 }
---
---Notifications
---
f3L3FlowPointThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L3FlowPointThresholdIndex,
f3L3FlowPointThresholdInterval,
f3L3FlowPointThresholdVariable,
f3L3FlowPointThresholdValueLo,
f3L3FlowPointThresholdValueHi,
f3L3FlowPointThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L3 flow point is crossed."
::= { f3L3Notifications 1 }
f3L3QosPolicerThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L3QosPolicerThresholdIndex,
f3L3QosPolicerThresholdInterval,
f3L3QosPolicerThresholdVariable,
f3L3QosPolicerThresholdValueLo,
f3L3QosPolicerThresholdValueHi,
f3L3QosPolicerThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L3 Qos Policer is crossed."
::= { f3L3Notifications 2 }
f3L3QosShaperThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L3QosShaperThresholdIndex,
f3L3QosShaperThresholdInterval,
f3L3QosShaperThresholdVariable,
f3L3QosShaperThresholdValueLo,
f3L3QosShaperThresholdValueHi,
f3L3QosShaperThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L3 Qos Shaper is crossed."
::= { f3L3Notifications 3 }
f3L3TrafficIpInterfaceThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L3TrafficIpInterfaceThresholdIndex,
f3L3TrafficIpInterfaceThresholdInterval,
f3L3TrafficIpInterfaceThresholdVariable,
f3L3TrafficIpInterfaceThresholdValueLo,
f3L3TrafficIpInterfaceThresholdValueHi,
f3L3TrafficIpInterfaceThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L3 traffic ip interface is crossed."
::= { f3L3Notifications 4 }
f3L3AclRuleThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L3AclRuleThresholdIndex,
f3L3AclRuleThresholdInterval,
f3L3AclRuleThresholdVariable,
f3L3AclRuleThresholdValueLo,
f3L3AclRuleThresholdValueHi,
f3L3AclRuleThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L3 acl rule is crossed."
::= { f3L3Notifications 5 }
f3L2A2NAclRuleThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L2A2NAclRuleThresholdIndex,
f3L2A2NAclRuleThresholdInterval,
f3L2A2NAclRuleThresholdVariable,
f3L2A2NAclRuleThresholdValueLo,
f3L2A2NAclRuleThresholdValueHi,
f3L2A2NAclRuleThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L2 A2N acl rule is crossed."
::= { f3L3Notifications 6 }
f3L2N2AAclRuleThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3L2N2AAclRuleThresholdIndex,
f3L2N2AAclRuleThresholdInterval,
f3L2N2AAclRuleThresholdVariable,
f3L2N2AAclRuleThresholdValueLo,
f3L2N2AAclRuleThresholdValueHi,
f3L2N2AAclRuleThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an L2 N2A acl rule is crossed."
::= { f3L3Notifications 7 }
--
-- Conformance
--
f3L3Compliances OBJECT IDENTIFIER ::= {f3L3Conformance 1}
f3L3Groups OBJECT IDENTIFIER ::= {f3L3Conformance 2}
f3L3Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the L3."
MODULE -- this module
MANDATORY-GROUPS {
f3L3ObjectsGroup, f3L3PerfGroup
}
::= { f3L3Compliances 1 }
f3L3ObjectsGroup OBJECT-GROUP
OBJECTS {
f3DhcpRelayAgentIndex,f3DhcpRelayAgentAlias,f3DhcpRelayAgentAdminState,
f3DhcpRelayAgentSecondaryState,f3DhcpRelayAgentOperationalState,
f3DhcpRelayAgentIpVersion,f3DhcpRelayAgentServerIpAddress,
f3DhcpRelayAgentOp82SubOp9ControlEnabled,f3DhcpRelayAgentOp82SubOp9Value,
f3DhcpRelayAgentStorageType, f3DhcpRelayAgentRowStatus,
f3VrfIndex,f3VrfAlias, f3VrfAdminState,f3VrfSecondaryState,f3VrfTraceRouteIpv4Destination,
f3VrfOperationalState,f3VrfAccIsolationControlEnabled,f3VrfPingResult,f3VrfPingIpv4Destination,
f3VrfTraceRouteResult,f3VrfAction,f3VrfStorageType,f3VrfRowStatus, f3VrfDhcpRoutesControl,
f3L3FlowPointPortTypeIndex,f3L3FlowPointPortIndex,
f3L3FlowPointIndex,f3L3FlowPointAlias,f3L3FlowPointAdminState,f3L3FlowPointSecondaryState,
f3L3FlowPointOperationalState,f3L3FlowPointMultiCOSEnabled,f3L3FlowPointCOS,f3L3FlowPointUntaggedMemberShipEnabled,
f3L3FlowPointOuterTagMemberShipEnabled,f3L3FlowPointOuterTagMemberShipVlanId,
f3L3FlowPointInnerTagMemberShipEnabled,f3L3FlowPointInnerTagMemberShipVlanId,
f3L3FlowPointFragmentedPktsFwdEnabled,
f3L3FlowPointHCosMgmtEnabled,f3L3FlowPointHCosGuaranteedBwHi,f3L3FlowPointHCosGuaranteedBwLo,
f3L3FlowPointHCosMaximumBwHi,f3L3FlowPointHCosMaximumBwLo,f3L3FlowPointPolicingEnabled,
f3L3FlowPointStorageType,f3L3FlowPointRowStatus,
f3L3AclRuleParentIndex,f3L3AclRuleIndex,f3L3AclRuleAlias,f3L3AclRuleSrcIpv4AddressControl,
f3L3AclRuleDynamicSrcIpControl,f3L3AclRuleSrcIpv4AddressLowLimit,f3L3AclRuleDstIpv4AddressControl,
f3L3AclRuleDstIpv4AddressLowLimit,f3L3AclRuleIpv4PriorityControl,f3L3AclRuleIpv4PriorityLowLimit,
f3L3AclRuleProtocolControl,f3L3AclRuleProtocolNumber,f3L3AclRuleSrcPortControl,
f3L3AclRuleSrcPortLowLimit,f3L3AclRuleSrcPortHighLimit,f3L3AclRuleDstPortControl,
f3L3AclRuleDstPortLowLimit,f3L3AclRuleDstPortHighLimit,f3L3AclRulePriority,f3L3AclRuleCOS,
f3L3AclRuleOperation,f3L3AclRuleSummary,f3L3AclRuleCosOverrideControl,
f3L3AclRuleSrcMacAddressControl,f3L3AclRuleDynamicSrcMacAddressControl,
f3L3AclRuleSrcMacAddress,f3L3AclRuleSrcMacAddressMask,f3L3AclRuleDstMacAddressControl,
f3L3AclRuleDstMacAddress,f3L3AclRuleDstMacAddressMask,f3L3AclRuleOuterVlanVIDControl,
f3L3AclRuleOuterVlanVIDLowLimit,f3L3AclRuleOuterVlanVIDHighLimit,
f3L3AclRuleInnerVlanVIDControl,f3L3AclRuleInnerVlanVIDLowLimit,f3L3AclRuleInnerVlanVIDHighLimit,
f3L3AclRuleOuterVlanPcpControl,f3L3AclRuleOuterVlanPcpLowLimit,f3L3AclRuleOuterVlanPcpHighLimit,
f3L3AclRuleInnerVlanPcpControl,f3L3AclRuleInnerVlanPcpLowLimit,f3L3AclRuleInnerVlanPcpHighLimit,
f3L3AclRuleOuterVlanDeiControl,f3L3AclRuleOuterVlanDei,f3L3AclRuleEtherTypeControl,
f3L3AclRuleEtherType,f3L3AclRuleTcpFlagsControl,f3L3AclRuleTcpFlags,
f3L3AclRuleSrcIpv4AddressHighLimit,f3L3AclRuleDstIpv4AddressHighLimit,f3L3AclRuleIpv4PriorityHighLimit,
f3L3AclRuleStorageType,f3L3AclRuleRowStatus,f3L3AclRuleAdminState,
f3L2A2NAclRuleParentIndex,f3L2A2NAclRuleIndex,f3L2A2NAclRuleAlias,f3L2A2NAclRuleSrcIpv4AddressControl,
f3L2A2NAclRuleDynamicSrcIpControl,f3L2A2NAclRuleSrcIpv4AddressLowLimit,f3L2A2NAclRuleDstIpv4AddressControl,
f3L2A2NAclRuleDstIpv4AddressLowLimit,f3L2A2NAclRuleIpv4PriorityControl,f3L2A2NAclRuleIpv4PriorityLowLimit,
f3L2A2NAclRuleProtocolControl,f3L2A2NAclRuleProtocolNumber,f3L2A2NAclRuleSrcPortControl,f3L2A2NAclRuleSrcPortLowLimit,
f3L2A2NAclRuleSrcPortHighLimit,f3L2A2NAclRuleDstPortControl,f3L2A2NAclRuleDstPortLowLimit,f3L2A2NAclRuleDstPortHighLimit,
f3L2A2NAclRulePriority,f3L2A2NAclRuleCOS,f3L2A2NAclRuleOperation,f3L2A2NAclRuleSummary,f3L2A2NAclRuleCosOverrideControl,
f3L2A2NAclRuleSrcMacAddressControl,f3L2A2NAclRuleDynamicSrcMacAddressControl,f3L2A2NAclRuleSrcMacAddress,
f3L2A2NAclRuleSrcMacAddressMask,f3L2A2NAclRuleDstMacAddressControl,f3L2A2NAclRuleDstMacAddress,f3L2A2NAclRuleDstMacAddressMask,
f3L2A2NAclRuleOuterVlanVIDControl,f3L2A2NAclRuleOuterVlanVIDLowLimit,f3L2A2NAclRuleOuterVlanVIDHighLimit,f3L2A2NAclRuleInnerVlanVIDControl,
f3L2A2NAclRuleInnerVlanVIDLowLimit,f3L2A2NAclRuleInnerVlanVIDHighLimit,f3L2A2NAclRuleOuterVlanPcpControl,f3L2A2NAclRuleOuterVlanPcpLowLimit,
f3L2A2NAclRuleOuterVlanPcpHighLimit,f3L2A2NAclRuleInnerVlanPcpControl,f3L2A2NAclRuleInnerVlanPcpLowLimit,f3L2A2NAclRuleInnerVlanPcpHighLimit,
f3L2A2NAclRuleOuterVlanDeiControl,f3L2A2NAclRuleOuterVlanDei,f3L2A2NAclRuleEtherTypeControl,f3L2A2NAclRuleEtherType,
f3L2A2NAclRuleTcpFlagsControl,f3L2A2NAclRuleTcpFlags,f3L2A2NAclRuleSrcIpv4AddressHighLimit,f3L2A2NAclRuleDstIpv4AddressHighLimit,
f3L2A2NAclRuleIpv4PriorityHighLimit,f3L2A2NAclRuleStorageType,f3L2A2NAclRuleRowStatus,f3L2A2NAclRuleAdminState,
f3L2N2AAclRuleParentIndex,f3L2N2AAclRuleIndex,f3L2N2AAclRuleAlias,f3L2N2AAclRuleSrcIpv4AddressControl,
f3L2N2AAclRuleDynamicSrcIpControl,f3L2N2AAclRuleSrcIpv4AddressLowLimit,f3L2N2AAclRuleDstIpv4AddressControl,
f3L2N2AAclRuleDstIpv4AddressLowLimit,f3L2N2AAclRuleIpv4PriorityControl,f3L2N2AAclRuleIpv4PriorityLowLimit,
f3L2N2AAclRuleProtocolControl,f3L2N2AAclRuleProtocolNumber,f3L2N2AAclRuleSrcPortControl,f3L2N2AAclRuleSrcPortLowLimit,
f3L2N2AAclRuleSrcPortHighLimit,f3L2N2AAclRuleDstPortControl,f3L2N2AAclRuleDstPortLowLimit,f3L2N2AAclRuleDstPortHighLimit,
f3L2N2AAclRulePriority,f3L2N2AAclRuleCOS,f3L2N2AAclRuleOperation,f3L2N2AAclRuleSummary,f3L2N2AAclRuleCosOverrideControl,
f3L2N2AAclRuleSrcMacAddressControl,f3L2N2AAclRuleDynamicSrcMacAddressControl,f3L2N2AAclRuleSrcMacAddress,
f3L2N2AAclRuleSrcMacAddressMask,f3L2N2AAclRuleDstMacAddressControl,f3L2N2AAclRuleDstMacAddress,f3L2N2AAclRuleDstMacAddressMask,
f3L2N2AAclRuleOuterVlanVIDControl,f3L2N2AAclRuleOuterVlanVIDLowLimit,f3L2N2AAclRuleOuterVlanVIDHighLimit,f3L2N2AAclRuleInnerVlanVIDControl,
f3L2N2AAclRuleInnerVlanVIDLowLimit,f3L2N2AAclRuleInnerVlanVIDHighLimit,f3L2N2AAclRuleOuterVlanPcpControl,f3L2N2AAclRuleOuterVlanPcpLowLimit,
f3L2N2AAclRuleOuterVlanPcpHighLimit,f3L2N2AAclRuleInnerVlanPcpControl,f3L2N2AAclRuleInnerVlanPcpLowLimit,f3L2N2AAclRuleInnerVlanPcpHighLimit,
f3L2N2AAclRuleOuterVlanDeiControl,f3L2N2AAclRuleOuterVlanDei,f3L2N2AAclRuleEtherTypeControl,f3L2N2AAclRuleEtherType,
f3L2N2AAclRuleTcpFlagsControl,f3L2N2AAclRuleTcpFlags,f3L2N2AAclRuleSrcIpv4AddressHighLimit,f3L2N2AAclRuleDstIpv4AddressHighLimit,
f3L2N2AAclRuleIpv4PriorityHighLimit,f3L2N2AAclRuleStorageType,f3L2N2AAclRuleRowStatus,f3L2N2AAclRuleAdminState,
f3L3QosPolicerIndex,f3L3QosPolicerAdminState,f3L3QosPolicerOperationalState,
f3L3QosPolicerSecondaryState,f3L3QosPolicerCIRLo,f3L3QosPolicerCIRHi,f3L3QosPolicerEIRLo,
f3L3QosPolicerEIRHi,f3L3QosPolicerCBS,f3L3QosPolicerEBS,f3L3QosPolicerAlgorithm,
f3L3QosPolicerColorMode,f3L3QosPolicerCouplingFlag,
f3L3QosPolicerStorageType,f3L3QosPolicerRowStatus,
f3L3QosShaperIndex,f3L3QosShaperAdminState,f3L3QosShaperOperationalState,
f3L3QosShaperSecondaryState,f3L3QosShaperCIRLo,f3L3QosShaperCIRHi,f3L3QosShaperEIRLo,
f3L3QosShaperEIRHi,f3L3QosShaperBufferSize,f3L3QosShaperCOS,
f3L3QosShaperWredGreenMinQueueThreshold,f3L3QosShaperWredGreenMaxQueueThreshold,
f3L3QosShaperWredGreenDropProbability,f3L3QosShaperWredYellowMinQueueThreshold,f3L3QosShaperWredYellowMaxQueueThreshold,
f3L3QosShaperWredYellowDropProbability,f3L3QosShaperStorageType,f3L3QosShaperRowStatus,
f3L3TrafficIPIfIndex,f3L3TrafficIPIfName,f3L3TrafficIPIfAdminState,f3L3TrafficIPIfSecondaryState,
f3L3TrafficIPIfOperationalState,f3L3TrafficIPIfProxyArpEnabled,f3L3TrafficIPIfIpAddressSourceType,
f3L3TrafficIPIfMgmtUseEnable,f3L3TrafficIPIfIpAddress,f3L3TrafficIPIfMask,
f3L3TrafficIPIfDhcpRelayInterfaceSide,f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60,
f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control,f3L3TrafficIPIfDhcpRelayUserClassOpt77,
f3L3TrafficIPIfDhcpRelayUserClassOpt77Control,f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1,
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled,f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2,
f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled,f3L3TrafficIPIfDhcpEnabled,f3L3TrafficIPIfDhcpRole,
f3L3TrafficIPIfDhcpClientIdEnabled,f3L3TrafficIPIfDhcpClientId,f3L3TrafficIPIfDhcpClassIdEnabled,
f3L3TrafficIPIfDhcpHostNameEnabled,f3L3TrafficIPIfDhcpHostName,
f3L3TrafficIPIfDhcpClientIdType,f3L3TrafficIPIfDhcpHostNameType,
f3L3TrafficIPIfStorageType,f3L3TrafficIPIfRowStatus,f3L3TrafficIPIfAction,
f3DhcpRelayAgentTrafficIpIfMemberObject,f3DhcpRelayAgentTrafficIpIfMemberStorageType,
f3DhcpRelayAgentTrafficIpIfMemberRowStatus,
f3VrfTrafficIpIfMemberObject,f3VrfTrafficIpIfMemberStorageType,f3VrfTrafficIpIfMemberRowStatus,
f3L3TrafficIpv4RouteDest,
f3L3TrafficIpv4RouteMask,f3L3TrafficIpv4RouteNextHop,f3L3TrafficIpv4RouteMetric,
f3L3TrafficIpv4RouteInterface,f3L3TrafficIpv4RouteAdvertise,f3L3TrafficIpv4RouteStatus,
f3L3TrafficIpv4RouteSourceForwardingEnable,f3L3TrafficIpv4RouteFlags,
f3L3TrafficIpv4RouteStorageType,f3L3TrafficIpv4RouteRowStatus,f3L3TrafficIpv4RouteType,
f3L3TrafficArpIPAddress, f3L3TrafficArpMacAddress, f3L3TrafficArpInterface,
f3L3TrafficArpEntryType, f3L3TrafficArpStorageType,f3L3TrafficArpRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the L3 functionality."
::= { f3L3Groups 1 }
f3L3PerfGroup OBJECT-GROUP
OBJECTS {
f3L3FlowPointStatsIndex,f3L3FlowPointStatsIntervalType,f3L3FlowPointStatsValid,
f3L3FlowPointStatsAction,f3L3FlowPointStatsFMG,f3L3FlowPointStatsFMY,f3L3FlowPointStatsFMRD,
f3L3FlowPointStatsFTD,f3L3FlowPointStatsFragmentedDropAcl,f3L3FlowPointStatsAclRuleDrop,
f3L3FlowPointStatsTtlEqual1Drop,f3L3FlowPointStatsFrameTx,f3L3FlowPointStatsFrameRx,f3L3FlowPointStatsNoRouteDrop,
f3L3FlowPointHistoryIndex,f3L3FlowPointHistoryTime,f3L3FlowPointHistoryValid,
f3L3FlowPointHistoryAction,f3L3FlowPointHistoryFMG,f3L3FlowPointHistoryFMY,
f3L3FlowPointHistoryFMRD,f3L3FlowPointHistoryFTD,f3L3FlowPointHistoryFragmentedDropAcl,
f3L3FlowPointHistoryAclRuleDrop,f3L3FlowPointHistoryTtlEqual1Drop,f3L3FlowPointHistoryFrameTx,
f3L3FlowPointHistoryFrameRx,f3L3FlowPointHistoryNoRouteDrop,
f3L3FlowPointThresholdIndex,f3L3FlowPointThresholdInterval,f3L3FlowPointThresholdVariable,
f3L3FlowPointThresholdValueLo,f3L3FlowPointThresholdValueHi,f3L3FlowPointThresholdMonValue,
f3L3TrafficIpInterfaceStatsIndex,f3L3TrafficIpInterfaceStatsIntervalType,
f3L3TrafficIpInterfaceStatsValid,f3L3TrafficIpInterfaceStatsAction,f3L3TrafficIpInterfaceStatsDhcpTx,
f3L3TrafficIpInterfaceStatsDhcpRx,f3L3TrafficIpInterfaceStatsIcmpTx,
f3L3TrafficIpInterfaceStatsIcmpRx,f3L3TrafficIpInterfaceStatsArpReqTx,f3L3TrafficIpInterfaceStatsArpReqRx,
f3L3TrafficIpInterfaceStatsArpReplyTx,f3L3TrafficIpInterfaceStatsArpReplyRx,
f3L3TrafficIpInterfaceHistoryIndex,f3L3TrafficIpInterfaceHistoryTime,f3L3TrafficIpInterfaceHistoryValid,
f3L3TrafficIpInterfaceHistoryAction,f3L3TrafficIpInterfaceHistoryDhcpTx,f3L3TrafficIpInterfaceHistoryDhcpRx,
f3L3TrafficIpInterfaceHistoryIcmpTx,f3L3TrafficIpInterfaceHistoryIcmpRx,
f3L3TrafficIpInterfaceHistoryArpReqTx,f3L3TrafficIpInterfaceHistoryArpReqRx,f3L3TrafficIpInterfaceHistoryArpReplyTx,
f3L3TrafficIpInterfaceHistoryArpReplyRx,
f3L3TrafficIpInterfaceThresholdIndex,f3L3TrafficIpInterfaceThresholdInterval,f3L3TrafficIpInterfaceThresholdVariable,
f3L3TrafficIpInterfaceThresholdValueLo,f3L3TrafficIpInterfaceThresholdValueHi,f3L3TrafficIpInterfaceThresholdMonValue,
f3L3AclRuleStatsIndex,f3L3AclRuleStatsIntervalType,f3L3AclRuleStatsValid,f3L3AclRuleStatsAction,
f3L3AclRuleStatsRuleMatch,
f3L3AclRuleHistoryIndex,f3L3AclRuleHistoryTime,f3L3AclRuleHistoryValid,f3L3AclRuleHistoryAction,
f3L3AclRuleHistoryRuleMatch,
f3L3AclRuleThresholdIndex,f3L3AclRuleThresholdInterval,f3L3AclRuleThresholdVariable,
f3L3AclRuleThresholdValueLo,f3L3AclRuleThresholdValueHi,f3L3AclRuleThresholdMonValue,
f3L2A2NAclRuleStatsIndex,f3L2A2NAclRuleStatsIntervalType,f3L2A2NAclRuleStatsValid,f3L2A2NAclRuleStatsAction,
f3L2A2NAclRuleStatsRuleMatch,
f3L2A2NAclRuleHistoryIndex,f3L2A2NAclRuleHistoryTime,f3L2A2NAclRuleHistoryValid,f3L2A2NAclRuleHistoryAction,
f3L2A2NAclRuleHistoryRuleMatch,
f3L2A2NAclRuleThresholdIndex,f3L2A2NAclRuleThresholdInterval,f3L2A2NAclRuleThresholdVariable,
f3L2A2NAclRuleThresholdValueLo,f3L2A2NAclRuleThresholdValueHi,f3L2A2NAclRuleThresholdMonValue,
f3L2N2AAclRuleStatsIndex,f3L2N2AAclRuleStatsIntervalType,f3L2N2AAclRuleStatsValid,f3L2N2AAclRuleStatsAction,
f3L2N2AAclRuleStatsRuleMatch,
f3L2N2AAclRuleHistoryIndex,f3L2N2AAclRuleHistoryTime,f3L2N2AAclRuleHistoryValid,f3L2N2AAclRuleHistoryAction,
f3L2N2AAclRuleHistoryRuleMatch,
f3L2N2AAclRuleThresholdIndex,f3L2N2AAclRuleThresholdInterval,f3L2N2AAclRuleThresholdVariable,
f3L2N2AAclRuleThresholdValueLo,f3L2N2AAclRuleThresholdValueHi,f3L2N2AAclRuleThresholdMonValue,
f3L3QosPolicerStatsIndex,f3L3QosPolicerStatsIntervalType,f3L3QosPolicerStatsValid,
f3L3QosPolicerStatsAction,f3L3QosPolicerStatsFMG,f3L3QosPolicerStatsFMY,
f3L3QosPolicerStatsFMYD,f3L3QosPolicerStatsFMRD,f3L3QosPolicerStatsBytesIn,
f3L3QosPolicerStatsBytesOut,f3L3QosPolicerStatsABR,
f3L3QosPolicerHistoryIndex,f3L3QosPolicerHistoryTime,f3L3QosPolicerHistoryValid,
f3L3QosPolicerHistoryAction,f3L3QosPolicerHistoryFMG,f3L3QosPolicerHistoryFMY,
f3L3QosPolicerHistoryFMYD,f3L3QosPolicerHistoryFMRD,f3L3QosPolicerHistoryBytesIn,
f3L3QosPolicerHistoryBytesOut,f3L3QosPolicerHistoryABR,
f3L3QosPolicerThresholdIndex,
f3L3QosPolicerThresholdInterval,f3L3QosPolicerThresholdVariable,f3L3QosPolicerThresholdValueLo,
f3L3QosPolicerThresholdValueHi,f3L3QosPolicerThresholdMonValue,
f3L3QosShaperStatsIndex,f3L3QosShaperStatsIntervalType,f3L3QosShaperStatsValid,
f3L3QosShaperStatsAction,f3L3QosShaperStatsBT,f3L3QosShaperStatsBTD,f3L3QosShaperStatsFD,
f3L3QosShaperStatsFTD,f3L3QosShaperStatsBR,f3L3QosShaperStatsFR,
f3L3QosShaperStatsABRRL,f3L3QosShaperStatsBREDD,f3L3QosShaperStatsFREDD,
f3L3QosShaperHistoryIndex,f3L3QosShaperHistoryTime,f3L3QosShaperHistoryValid,
f3L3QosShaperHistoryAction,f3L3QosShaperHistoryBT,f3L3QosShaperHistoryBTD,
f3L3QosShaperHistoryFD,f3L3QosShaperHistoryFTD,f3L3QosShaperHistoryBR,
f3L3QosShaperHistoryFR,f3L3QosShaperHistoryABRRL,f3L3QosShaperHistoryBREDD,
f3L3QosShaperHistoryFREDD,
f3L3QosShaperThresholdIndex,f3L3QosShaperThresholdInterval,f3L3QosShaperThresholdVariable,
f3L3QosShaperThresholdValueLo,f3L3QosShaperThresholdValueHi,f3L3QosShaperThresholdMonValue
}
STATUS current
DESCRIPTION
"A collection of objects performance used to manage the L3 functionality."
::= { f3L3Groups 2 }
END
View Git Blame Copy Permalink