763 lines
26 KiB
Plaintext
763 lines
26 KiB
Plaintext
ADTRAN-TA5K-REDUNDANCY-MIB
|
|
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
-- TITLE: The ADTRAN Total Access TA5000 Redundancy MIB
|
|
-- PRODUCT: 1187020L1, 1187800L1, 1187300L1
|
|
-- VERSION: 1.0
|
|
-- DATE: April 15, 2006
|
|
|
|
-- This MIB Contains tables specific to the TA5000 Redundancy
|
|
--
|
|
|
|
-- MIBs supported:
|
|
|
|
-- HISTORY:
|
|
-- 04/18/06 tpm First edition
|
|
-- 04/19/06 tpm Module identiy inherits from adIdentityShared, and mgmt objects are in adShared,
|
|
-- RedundancyTable renamed to EquipmentRedundancy
|
|
-- 05/06/08 aed Add two new alarm notifications: protection unavailable and card active.
|
|
-- 06/05/08 aed Correct errors found during SMICng compile
|
|
-- 11/05/08 aed Change the severity for three alarms. Peer version mismatch, Remote Db Sync,
|
|
-- and Db Mirroring traps are all warnings.
|
|
-- 01/27/09 aed Add new manual-switch notification.
|
|
-- 03/17/09 rp Added SNMP Support for the Eqpt APS On Alarm. Added the Active and Clear version of the OIDS.
|
|
-- 07/10/09 nra Added new Automatic Switch notification
|
|
-- 02/18/10 glf Added Alarm Provisioning to allow enable/disable of redundancy alarms
|
|
-- **** DO NOT ADD REVISION HISTORY HERE ****
|
|
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Counter32,
|
|
IpAddress,
|
|
-- Gauge32,
|
|
-- Counter64,
|
|
-- TimeTicks,
|
|
-- Unsigned32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
|
|
sysName
|
|
FROM SNMPv2-MIB
|
|
|
|
ifIndex
|
|
-- InterfaceIndexOrZero,
|
|
-- InterfaceIndex
|
|
FROM IF-MIB
|
|
|
|
DisplayString,
|
|
TruthValue,
|
|
RowStatus,
|
|
-- TimeInterval,
|
|
MacAddress,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
|
|
-- SnmpAdminString
|
|
-- FROM SNMP-FRAMEWORK-MIB
|
|
|
|
adIdentity,
|
|
adIdentityShared,
|
|
adProducts,
|
|
adMgmt
|
|
FROM ADTRAN-MIB
|
|
|
|
adGenTa5kRedundancy,
|
|
adGenTa5kRedundancyID
|
|
FROM ADTRAN-GENTA5K-MIB
|
|
|
|
-- IANAifType
|
|
-- FROM IANAifType-MIB
|
|
|
|
adTrapInformSeqNum
|
|
FROM ADTRAN-GENTRAPINFORM-MIB
|
|
|
|
adGenSlotInfoIndex
|
|
FROM ADTRAN-GENSLOT-MIB;
|
|
|
|
-- *********************************************************************************************************
|
|
|
|
adTa5kRedundancyModuleIdentity MODULE-IDENTITY
|
|
LAST-UPDATED "201110121400Z"
|
|
ORGANIZATION
|
|
"ADTRAN, Inc."
|
|
CONTACT-INFO
|
|
"CND Tech Support
|
|
Postal: ADTRAN, Inc.
|
|
901 Explorer Blvd.
|
|
Huntsville, AL 35806
|
|
Tel: +1 800 726-8663
|
|
Fax: +1 256 963 6217
|
|
E-mail: support@adtran.com"
|
|
DESCRIPTION
|
|
"Total Access 5000 Redundancy MIB"
|
|
|
|
REVISION "201110121400Z"
|
|
DESCRIPTION "Add Standby Not Ready Reasons Table"
|
|
::= { adGenTa5kRedundancyID 1 }
|
|
|
|
-- OBJECT IDENTIFIERS
|
|
adTa5kEquipmentRedundancy OBJECT IDENTIFIER ::= { adGenTa5kRedundancy 1 }
|
|
adTa5kFacilityRedundancy OBJECT IDENTIFIER ::= { adGenTa5kRedundancy 2 }
|
|
adTa5kRedundancyAlarmPrefix OBJECT IDENTIFIER ::= { adGenTa5kRedundancy 3 }
|
|
adTa5kRedundancyAlarmProv OBJECT IDENTIFIER ::= { adGenTa5kRedundancy 4 }
|
|
adTa5kRedundancyAlarms OBJECT IDENTIFIER ::= { adTa5kRedundancyAlarmPrefix 0}
|
|
|
|
|
|
adTa5kEquipmentRedundancyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdTa5kEquipmentRedundancyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
::= { adTa5kEquipmentRedundancy 1 }
|
|
|
|
adTa5kEquipmentRedundancyEntry OBJECT-TYPE
|
|
SYNTAX AdTa5kEquipmentRedundancyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
INDEX { adGenSlotInfoIndex }
|
|
::= { adTa5kEquipmentRedundancyTable 1 }
|
|
|
|
AdTa5kEquipmentRedundancyEntry ::=
|
|
SEQUENCE {
|
|
adTa5kEquipmentRedundancySupported INTEGER,
|
|
adTa5kEquipmentRedundancyRevertive INTEGER,
|
|
adTa5kEquipmentRedundancyRevertiveTimeout Integer32,
|
|
adTa5kEquipmentRedundancyForceFailover INTEGER,
|
|
adTa5kEquipmentRedundancyState INTEGER,
|
|
adTa5kEquipmentRedundancyPeerSlot Integer32,
|
|
adTa5kEquipmentRedundancyFeatureEnabled INTEGER,
|
|
adTa5kEquipmentRedundancyFacilityType INTEGER,
|
|
adTa5kEquipmentRedundancyStandbyReasonsCount Integer32
|
|
}
|
|
|
|
adTa5kEquipmentRedundancySupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
peerNotResponding (2),
|
|
peerIncompatible (3),
|
|
peerNotPresent (4),
|
|
peerNotReady (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supported means this unit will be able to failover to a standby card.
|
|
if it is not true, the value returns a reason why the unit cannot failover.
|
|
Valid for the active unit only."
|
|
::= { adTa5kEquipmentRedundancyEntry 1 }
|
|
|
|
adTa5kEquipmentRedundancyRevertive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the property of a protected unit reverting back to the original
|
|
operating unit when the original unit's health has returned to normal operating status.
|
|
Enabled will revert (after a timeout default=15s).
|
|
Disabled will leave the second unit acting as the active and the first unit will be the standby.
|
|
Valid for the active unit only."
|
|
::= { adTa5kEquipmentRedundancyEntry 2 }
|
|
|
|
adTa5kEquipmentRedundancyRevertiveTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time in seconds to wait before allowing a protection switch to revert back to the primary unit.
|
|
Valid for the active unit only."
|
|
::= { adTa5kEquipmentRedundancyEntry 3 }
|
|
|
|
adTa5kEquipmentRedundancyForceFailover OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
failover (1),
|
|
notapplicable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to failover(1) will swap the active and standby status of the redundant modules.
|
|
Valid for the active unit only."
|
|
::= { adTa5kEquipmentRedundancyEntry 4 }
|
|
|
|
adTa5kEquipmentRedundancyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
standby (2),
|
|
standbyNotReady (3),
|
|
notApplicable (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Equipment Redundancy State.
|
|
StandbyNotReady means the unit is the standby, but cannot accept a failover should one occur.
|
|
This case occurs when the standby is booting up, or not syncronized with provisioning from the active."
|
|
::= { adTa5kEquipmentRedundancyEntry 5 }
|
|
|
|
adTa5kEquipmentRedundancyPeerSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Slot number of the peer."
|
|
::= { adTa5kEquipmentRedundancyEntry 6 }
|
|
|
|
adTa5kEquipmentRedundancyFeatureEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enabled if the card is provisioned to operate rendundantly if possible. Disabled
|
|
if the card if provisioned for non-redundant operation only."
|
|
::= { adTa5kEquipmentRedundancyEntry 7 }
|
|
|
|
adTa5kEquipmentRedundancyFacilityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sharedFacilities(0),
|
|
dualFacilities(1),
|
|
separateFacilities(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shared Facilities: redundant modules share a physical cable/fiber ('y-cable')
|
|
Dual Facilities: redundant modules have independent redundant cable/fiber facilities
|
|
Separate Facilites: modules and cable/fiber facilities are not redundant"
|
|
::= { adTa5kEquipmentRedundancyEntry 8 }
|
|
|
|
adTa5kEquipmentRedundancyStandbyReasonsCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Returns a count of the number of rows in the StandbyNotReadyReasonsTable."
|
|
::= { adTa5kEquipmentRedundancyEntry 9 }
|
|
|
|
adTa5kStandbyNotReadyReasonsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdTa5kStandbyNotReadyReasonEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the reasons why a module is in the StandbyNotReady state"
|
|
::= { adTa5kEquipmentRedundancy 3 }
|
|
|
|
adTa5kStandbyNotReadyReasonEntry OBJECT-TYPE
|
|
SYNTAX AdTa5kStandbyNotReadyReasonEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the StandbyNotReadyReasonsTable"
|
|
INDEX { adGenSlotInfoIndex, adTa5kStandbyNotReadyReasonIndex }
|
|
::= { adTa5kStandbyNotReadyReasonsTable 1 }
|
|
|
|
AdTa5kStandbyNotReadyReasonEntry ::=
|
|
SEQUENCE {
|
|
adTa5kStandbyNotReadyReasonIndex Integer32,
|
|
adTa5kStandbyNotReadyReason DisplayString
|
|
}
|
|
|
|
adTa5kStandbyNotReadyReasonIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique index for each StandbyNotReady reason.
|
|
Values range from 1 to adTa5kEquipmentRedundancyStandbyReasonsCount"
|
|
::= { adTa5kStandbyNotReadyReasonEntry 1 }
|
|
|
|
adTa5kStandbyNotReadyReason OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Returns the reason for the StandbyNotReady state."
|
|
::= { adTa5kStandbyNotReadyReasonEntry 2 }
|
|
|
|
-- *********************************************************************************************************
|
|
-- ********************** Facility *********************************************************************
|
|
-- *********************************************************************************************************
|
|
|
|
adTa5kFacilityRedundancyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdTa5kFacilityRedundancyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is valid for the active unit only."
|
|
::= { adTa5kFacilityRedundancy 1 }
|
|
|
|
adTa5kFacilityRedundancyEntry OBJECT-TYPE
|
|
SYNTAX AdTa5kFacilityRedundancyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
INDEX { ifIndex }
|
|
::= { adTa5kFacilityRedundancyTable 1 }
|
|
|
|
AdTa5kFacilityRedundancyEntry ::=
|
|
SEQUENCE {
|
|
adTa5kFacilityRedundancySupported INTEGER,
|
|
adTa5kFacilityRedundancyState INTEGER,
|
|
adTa5kFacilityRedundancyForceProtect Integer32,
|
|
adTa5kFacilityRedundancyProtectedByIfIndex Integer32
|
|
}
|
|
|
|
adTa5kFacilityRedundancySupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
protected (1),
|
|
redundantFacilityNotPresent (2),
|
|
redundantFacilityNotCompatible (3),
|
|
redundantFacilityAdminDown (4),
|
|
redundantFacilityLinkDown (5),
|
|
redundantFacilityInUse (6),
|
|
redundantEquipmentAdminDown (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { adTa5kFacilityRedundancyEntry 1 }
|
|
|
|
adTa5kFacilityRedundancyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
standby (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { adTa5kFacilityRedundancyEntry 2 }
|
|
|
|
adTa5kFacilityRedundancyForceProtect OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { adTa5kFacilityRedundancyEntry 3 }
|
|
|
|
adTa5kFacilityRedundancyProtectedByIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { adTa5kFacilityRedundancyEntry 4 }
|
|
-- ******************************************************************************************
|
|
-- Alarm Provisioning
|
|
-- ******************************************************************************************
|
|
|
|
adTa5kRedundancyAlarmProvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdTa5kRedundancyAlarmProvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
::= { adTa5kRedundancyAlarmProv 1 }
|
|
|
|
adTa5kRedundancyAlarmProvEntry OBJECT-TYPE
|
|
SYNTAX AdTa5kRedundancyAlarmProvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
INDEX { adGenSlotInfoIndex }
|
|
::= { adTa5kRedundancyAlarmProvTable 1 }
|
|
|
|
AdTa5kRedundancyAlarmProvEntry ::=
|
|
SEQUENCE {
|
|
adTa5kRedundancyAlarmProvCardActiveEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvProtectionUnavailableEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvPeerCodeVersionMismatchEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvPeerDbMirroringSyncInProgressEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvPeerRemoteDatabaseSyncInProgressEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvManualSwitchEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvSwitchToProtectEnable TruthValue,
|
|
adTa5kRedundancyAlarmProvAutomaticSwitchEnable TruthValue
|
|
|
|
}
|
|
|
|
adTa5kRedundancyAlarmProvCardActiveEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 1 }
|
|
|
|
adTa5kRedundancyAlarmProvProtectionUnavailableEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 2 }
|
|
|
|
adTa5kRedundancyAlarmProvPeerCodeVersionMismatchEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 3 }
|
|
|
|
adTa5kRedundancyAlarmProvPeerDbMirroringSyncInProgressEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 4 }
|
|
|
|
adTa5kRedundancyAlarmProvPeerRemoteDatabaseSyncInProgressEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 5 }
|
|
|
|
adTa5kRedundancyAlarmProvManualSwitchEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 6 }
|
|
|
|
adTa5kRedundancyAlarmProvSwitchToProtectEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 7 }
|
|
|
|
adTa5kRedundancyAlarmProvAutomaticSwitchEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True - alarm is enabled"
|
|
|
|
DEFVAL {true}
|
|
|
|
::= { adTa5kRedundancyAlarmProvEntry 8 }
|
|
|
|
-- ******************************************************************************************
|
|
-- Alarms
|
|
-- ******************************************************************************************
|
|
adTa5kRedundancyCardActive NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the standby card in redundant pair has become the active module."
|
|
|
|
--#TYPE "Status - Card Active"
|
|
--#SUMMARY "Redundancy: Card Active on"
|
|
--#SUMMARY "Shelf: %s, Slot: %d"
|
|
--#ARGUMENTS {1, 2}
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 1 }
|
|
|
|
adTa5kRedundancyProtectionAvailable NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Redundancy protection is available for this slot."
|
|
|
|
--#TYPE "Minor - Protection Unavailable - Cleared"
|
|
--#SUMMARY "Protection Unavailable - Cleared"
|
|
--#SUMMARY "cleared at shelf: %s, slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "MINOR"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Alarm Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= {adTa5kRedundancyAlarms 2}
|
|
|
|
adTa5kRedundancyProtectionUnavailable NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Redundancy protection is not available for this slot."
|
|
|
|
|
|
--#TYPE "Minor - Protection Unavailable - Active"
|
|
--#SUMMARY "Protection Unavailable - Active"
|
|
--#SUMMARY "detected at shelf: %s, slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "MINOR"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Alarm Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= {adTa5kRedundancyAlarms 3}
|
|
|
|
adTa5kRedundancyPeerCodeVersionMismatchClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the Active module code version mismatch with its peer has cleared."
|
|
|
|
--#TYPE "Status - xM Peer Code Version Mismatch Clear"
|
|
--#SUMMARY "TA5000 Module: Peer Code Version Alarm Cleared on"
|
|
--#SUMMARY "Shelf: %s , slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "WARNING"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 4 }
|
|
|
|
adTa5kRedundancyPeerCodeVersionMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the Active module code version does not match with its peer."
|
|
--#TYPE "Status - xM Peer Code Version Mismatch"
|
|
--#SUMMARY "TA5000 module: Peer Code Version Mismatch Alarm on"
|
|
--#SUMMARY "Shelf: %s , slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "WARNING"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 5 }
|
|
|
|
|
|
adTa5kRedundancyPeerDatabaseMirroringInSync NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the xM's peer database mirroring is in sync."
|
|
|
|
--#TYPE "Status - xM Database Mirroring In Sync"
|
|
--#SUMMARY "TA5000 Module: Database Mirroring In Sync"
|
|
--#SUMMARY "Shelf: %s, slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "WARNING"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 6 }
|
|
|
|
adTa5kRedundancyPeerDbMirroringSyncInProgress NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the peer database mirroring sync is in progress on the xM."
|
|
|
|
--#TYPE "Status - xM Database Mirroring Sync In Progress"
|
|
--#SUMMARY "TA5000 Module: Database Mirroring Sync In Progress"
|
|
--#SUMMARY "Shelf: %s , slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "WARNING"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 7 }
|
|
|
|
|
|
adTa5kRedundancyPeerRemoteDatabaseSyncInProgress NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the peer remote database sync is in progress on the SM."
|
|
|
|
--#TYPE "Status - xM Remote Database Sync In Progress"
|
|
--#SUMMARY "TA5000 Module: Remote Database Sync In Progress on"
|
|
--#SUMMARY "Shelf: %s , slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "WARNING"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 8 }
|
|
|
|
adTa5kRedundancyPeerRemoteDatabaseInSync NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the xM's remote database is in sync."
|
|
|
|
--#TYPE "Status - xM Remote Database In Sync"
|
|
--#SUMMARY "TA5000 Module: Remote Database In Sync on"
|
|
--#SUMMARY "Shelf: %s , slot: %d"
|
|
--#ARGUMENTS {1,2}
|
|
--#SEVERITY "WARNING"
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 9 }
|
|
|
|
adTa5kRedundancyManualSwitch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the user has initiated a manual protection switch."
|
|
|
|
--#TYPE "Status - Manual Switch"
|
|
--#SUMMARY "Redundancy: Request for Manual Switch"
|
|
--#SUMMARY "Shelf: %s, Slot: %d"
|
|
--#ARGUMENTS {1, 2}
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 10 }
|
|
|
|
adTa5kEquipmentRedundancySwitchToProtectClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This alarm indicates that the 'working' module has now become active.
|
|
This alarm is only generated when revertive mode is enabled. The 'working' module is always the left-most module (odd slot).
|
|
The 'protect' module is always the right-most module (even slot)."
|
|
|
|
--#TYPE "Status - Eqpt APS On Clear"
|
|
--#SUMMARY "Redundancy: Eqpt APS On Clear"
|
|
--#SUMMARY "Shelf: %s, Slot: %d"
|
|
--#ARGUMENTS {1, 2}
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 12 }
|
|
|
|
adTa5kEquipmentRedundancySwitchToProtect NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This alarm indicates that the 'working' module has failed and the 'protect' module is now active.
|
|
This alarm is only generated when revertive mode is enabled. The 'working' module is always the left-most module (odd slot).
|
|
The 'protect' module is always the right-most module (even slot)."
|
|
|
|
--#TYPE "Status - Eqpt APS On"
|
|
--#SUMMARY "Redundancy: Eqpt APS On"
|
|
--#SUMMARY "Shelf: %s, Slot: %d"
|
|
--#ARGUMENTS {1, 2}
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 13 }
|
|
|
|
adTa5kRedundancyAutomaticSwitch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the equipment initiated an automatic protection switch."
|
|
|
|
--#TYPE "Status - Automatic Switch"
|
|
--#SUMMARY "Redundancy: Automatic Switch"
|
|
--#SUMMARY "Shelf: %s, Slot: %d"
|
|
--#ARGUMENTS {1, 2}
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTa5kRedundancyAlarms 14 }
|
|
|
|
END
|
|
|
|
|