WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/adtran/ADTRAN-GENETHLBK-MIB

489 lines
19 KiB
Plaintext
Raw Permalink Blame History

ADTRAN-GENETHLBK-MIB
DEFINITIONS ::= BEGIN
-- TITLE: The ADTRAN Ethernet Loopback MIB
-- PRODUCT: ADTRAN CND Products
-- VERSION: 1.0
-- DATE: February 29, 2012
-- This MIB contains tables that support managing Ethernet loopbacks
IMPORTS
adGenEthLbk,
adGenEthLbkID
FROM ADTRAN-SHARED-CND-SYSTEM-MIB
OBJECT-TYPE,
MODULE-IDENTITY
FROM SNMPv2-SMI
MacAddress,
RowStatus,
DisplayString,
TruthValue
FROM SNMPv2-TC
sysName
FROM SNMPv2-MIB
ifIndex,
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
;
adGenEthLbkMIB MODULE-IDENTITY
LAST-UPDATED "201301180000Z"
ORGANIZATION "Adtran, Inc."
CONTACT-INFO
"CND Tech Support
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726 8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"This MIB defines the objects for the Ethernet Loopback MIB."
REVISION "201301180000Z"
DESCRIPTION
"Added ability for loopbacks to filter on a MAC Source Address.
Added adGenEthLbkFacMatchMACSAExplicit, adGenEthLbkFacMatchMACSAMode,
adGenEthLbkTermMatchMACSAExplicit and adGenEthLbkTermMatchMACSAMode."
REVISION "201202290000Z"
DESCRIPTION "Created"
::= { adGenEthLbk 1 }
adGenEthLbkScalars OBJECT IDENTIFIER ::= {adGenEthLbk 1}
adGenEthLbkProvisioning OBJECT IDENTIFIER ::= {adGenEthLbk 2}
--==================================================================================================================
-- SYSTEM PROVISIONING
--==================================================================================================================
adGenEthLbkSystemMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure a system level MAC address that can be used by the loopback objects. The value
returned may or not be considered valid. See adGenEthLbkSystemMACAddressValid for a detailed behavior description."
::= {adGenEthLbkScalars 1}
adGenEthLbkSystemMACAddressValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether or not the value returned by adGenEthLbkSystemMACAddress is valid. This object
will automatically be set to true(1) if a valid SET to adGenEthLbkSystemMACAdress is performed. A SET on this
object to false(2) will automatically set adGenEthLbkSystemMACAddress to 00:00:00:00:00:00."
::= { adGenEthLbkScalars 2 }
adGenEthLbkSystemMACAddressError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the reason why the last SET of adGenEthLbkSystemMACAddress failed."
::= { adGenEthLbkScalars 3 }
--==================================================================================================================
-- ELEMENT PROVISIONING
--==================================================================================================================
adGenEthLbkElementProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenEthLbkElementProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for provisioning at the element level."
::= { adGenEthLbkProvisioning 1 }
adGenEthLbkElementProvEntry OBJECT-TYPE
SYNTAX AdGenEthLbkElementProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the element provisioning table."
INDEX { adGenEthLbkElementIndex }
::= { adGenEthLbkElementProvTable 1 }
AdGenEthLbkElementProvEntry ::=
SEQUENCE
{
adGenEthLbkElementIndex InterfaceIndex,
adGenEthLbkElementLastFacCreateError DisplayString,
adGenEthLbkElementLastTermCreateError DisplayString
}
adGenEthLbkElementIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index used to access an element in the system. While the type is InterfaceIndex,
the value contained refers to an element rather than an interface."
::= { adGenEthLbkElementProvEntry 1 }
adGenEthLbkElementLastFacCreateError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the error encountered during the last failed
facility loopback creation attempt. A blank string indicates no failure has
occured."
::= { adGenEthLbkElementProvEntry 2 }
adGenEthLbkElementLastTermCreateError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the error encountered during the last failed
terminal loopback creation attempt. A blank string indicates no failure has
occured."
::= { adGenEthLbkElementProvEntry 3 }
--==================================================================================================================
-- FACILITY LOOPBACK PROVISIONING
--==================================================================================================================
adGenEthLbkFacProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenEthLbkFacProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for provisioning of a facility Ethernet loopback
In a facility loopback, a flow ingressing the specified MEN port is turned back toward
that MEN port immediately upon entering the switch fabric. Prior to egress, the source
and destination MAC addresses are swapped."
::= { adGenEthLbkProvisioning 2 }
adGenEthLbkFacProvEntry OBJECT-TYPE
SYNTAX AdGenEthLbkFacProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the facility loopback provisioning table."
INDEX { adGenEthLbkElementIndex, IMPLIED adGenEthLbkFacName }
::= { adGenEthLbkFacProvTable 1 }
AdGenEthLbkFacProvEntry ::=
SEQUENCE
{
adGenEthLbkFacName DisplayString,
adGenEthLbkFacRowStatus RowStatus,
adGenEthLbkFacAdminState INTEGER,
adGenEthLbkFacRunningStatus INTEGER,
adGenEthLbkFacRunningStatusString DisplayString,
adGenEthLbkFacInterface InterfaceIndexOrZero,
adGenEthLbkFacMatchStag INTEGER,
adGenEthLbkFacMatchPbit INTEGER,
adGenEthLbkFacMatchMACDAExplicit MacAddress,
adGenEthLbkFacMatchMACDAMode INTEGER,
adGenEthLbkFacMatchMACSAExplicit MacAddress,
adGenEthLbkFacMatchMACSAMode INTEGER
}
adGenEthLbkFacName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..50))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the facility Ethernet loopback. This name is unique
amongst all facility loopbacks residing on an element."
::= { adGenEthLbkFacProvEntry 1 }
adGenEthLbkFacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new loopback or modify or delete an
existing loopback."
::= { adGenEthLbkFacProvEntry 2 }
adGenEthLbkFacAdminState OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to control the administrative state of the loopback."
::= { adGenEthLbkFacProvEntry 3 }
adGenEthLbkFacRunningStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
running(1),
notRunning(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the loopback. If the status is notRunning(2),
adGenEthLbkFacRunningStatusString will contain the reason."
::= { adGenEthLbkFacProvEntry 4 }
adGenEthLbkFacRunningStatusString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string representation of the current status. If adGenEthLbkFacRunningStatus
returns notRunning(2), this object will contain the reason it isn't running."
::= { adGenEthLbkFacProvEntry 5 }
adGenEthLbkFacInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface the loopback is to be applied to. The specified interface must be configured
as an active MEN port, i.e. connected to a running EVC. Traffic ingressing this interface
that matches specified criteria will be looped back and have the source and destination
MAC address swapped upon egress into the MEN. A value of 0 means the interface hasn't been specified."
::= { adGenEthLbkFacProvEntry 6 }
adGenEthLbkFacMatchStag OBJECT-TYPE
SYNTAX INTEGER (-1|2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the s-tag used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by an s-tag value."
::= { adGenEthLbkFacProvEntry 7 }
adGenEthLbkFacMatchPbit OBJECT-TYPE
SYNTAX INTEGER (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the p-bit used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by a p-bit value."
::= { adGenEthLbkFacProvEntry 8 }
adGenEthLbkFacMatchMACDAExplicit OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the destination MAC address used to filter out the loopback traffic. If adGenEthLbkFacMatchMACDAMode
is not set to explicit(1), then the value of this object is meaningless."
::= { adGenEthLbkFacProvEntry 9 }
adGenEthLbkFacMatchMACDAMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
explicit(1),
system(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkFacMatchMACDAExplicit is being used
system(2) meand the MAC address specified in adGenEthLbkSystemMACAddress is being used."
::= { adGenEthLbkFacProvEntry 10 }
adGenEthLbkFacMatchMACSAExplicit OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the source MAC address used to filter out the loopback traffic. If adGenEthLbkFacMatchMACSAMode
is not set to explicit(1), then the value of this object is meaningless."
::= { adGenEthLbkFacProvEntry 11 }
adGenEthLbkFacMatchMACSAMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
explicit(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkFacMatchMACSAExplicit is being used."
::= { adGenEthLbkFacProvEntry 12 }
--==================================================================================================================
-- TERMINAL LOOPBACK PROVISIONING
--==================================================================================================================
adGenEthLbkTermProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenEthLbkTermProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for provisioning of a terminal Ethernet loopback
In a terminal loopback, a flow is turned back at the UNI prior to where that flow would otherwise
egress the UNI. Prior to egress into the MEN, the source and destination MAC addresses are swapped."
::= { adGenEthLbkProvisioning 3 }
adGenEthLbkTermProvEntry OBJECT-TYPE
SYNTAX AdGenEthLbkTermProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the terminal loopback provisioning table."
INDEX { adGenEthLbkElementIndex, IMPLIED adGenEthLbkTermName }
::= { adGenEthLbkTermProvTable 1 }
AdGenEthLbkTermProvEntry ::=
SEQUENCE
{
adGenEthLbkTermName DisplayString,
adGenEthLbkTermRowStatus RowStatus,
adGenEthLbkTermAdminState INTEGER,
adGenEthLbkTermRunningStatus INTEGER,
adGenEthLbkTermRunningStatusString DisplayString,
adGenEthLbkTermInterface InterfaceIndexOrZero,
adGenEthLbkTermMatchStag INTEGER,
adGenEthLbkTermMatchPbit INTEGER,
adGenEthLbkTermMatchMACDAExplicit MacAddress,
adGenEthLbkTermMatchMACDAMode INTEGER,
adGenEthLbkTermMatchMACSAExplicit MacAddress,
adGenEthLbkTermMatchMACSAMode INTEGER
}
adGenEthLbkTermName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..50))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the terminal Ethernet loopback. This name is unique
amongst all terminal loopbacks residing on an element."
::= { adGenEthLbkTermProvEntry 1 }
adGenEthLbkTermRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new loopback or modify or delete an
existing loopback."
::= { adGenEthLbkTermProvEntry 2 }
adGenEthLbkTermAdminState OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to control the administrative state of the loopback."
::= { adGenEthLbkTermProvEntry 3 }
adGenEthLbkTermRunningStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
running(1),
notRunning(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the loopback. If the status is notRunning(2),
adGenEthLbkTermRunningStatusString will contain the reason."
::= { adGenEthLbkTermProvEntry 4 }
adGenEthLbkTermRunningStatusString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string representation of the current status. If adGenEthLbkTermRunningStatus
returns notRunning(2), this object will contain the reason it isn't running."
::= { adGenEthLbkTermProvEntry 5 }
adGenEthLbkTermInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface the loopback is to be applied to. The specified interface must be configured
as an active UNI port, i.e. connected to a running EVC-map. Traffic that matches specified criteria
that normally would egress this interface will be looped back and have the source and destination
MAC address swapped upon egress into the MEN. A value of 0 means the interface hasn't been specified."
::= { adGenEthLbkTermProvEntry 6 }
adGenEthLbkTermMatchStag OBJECT-TYPE
SYNTAX INTEGER (-1|2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the s-tag used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by an s-tag value."
::= { adGenEthLbkTermProvEntry 7 }
adGenEthLbkTermMatchPbit OBJECT-TYPE
SYNTAX INTEGER (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the p-bit used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by a p-bit value."
::= { adGenEthLbkTermProvEntry 8 }
adGenEthLbkTermMatchMACDAExplicit OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the destination MAC address used to filter out the loopback traffic. If adGenEthLbkTermMatchMACDAMode
is not set to explicit(1), then the value of this object is meaningless."
::= { adGenEthLbkTermProvEntry 9 }
adGenEthLbkTermMatchMACDAMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
explicit(1),
system(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkTermMatchMACDAExplicit is being used
system(2) meand the MAC address specified in adGenEthLbkSystemMACAddress is being used."
::= { adGenEthLbkTermProvEntry 10 }
adGenEthLbkTermMatchMACSAExplicit OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the source MAC address used to filter out the loopback traffic. If adGenEthLbkTermMatchMACSAMode
is not set to explicit(1), then the value of this object is meaningless."
::= { adGenEthLbkTermProvEntry 11 }
adGenEthLbkTermMatchMACSAMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
explicit(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkTermMatchMACSAExplicit is being used"
::= { adGenEthLbkTermProvEntry 12 }
END
View Git Blame Copy Permalink