Observium_CE/mibs/adtran/ADTRAN-GENERIC-PPP-MIB

2972 lines
104 KiB
Plaintext

ADTRAN-GENERIC-PPP-MIB
-- TITLE: The ADTRAN GENERIC PPP MIB
-- PRODUCT:
-- VERSION: 1.1
-- DATE: 07/08/2009
-- AUTHOR: Gilbert Fernandez
-- STATUS: PRELIMINARY
--
-- This MIB defines the object identifiers (OID) for the
-- ADTRAN GENERIC PPP MIB objects
--
-- HISTORY:
-- 09/25/08 glf created.
-- 10/28/08 glf added OIDs to provision alarm severity for the PPP alarms.
-- Modified alarms to add varbind for the alarm severity
-- 11/18/08 glf added more group provisioning OIDs for restart timer, max-terminate counter,
-- max-configure counter, max-failure counter, keep alive rate (echo request polls)
-- 05/22/09 cb CHAP configuration
-- 05/04/09 cb DHCP Client Support
-- 07/01/08 dcc add support for multilink PPP
-- 07/08/09 cb Final IP Address Support
-- 11/03/09 akd added Rx/TX L3 Packet Count Support to PPP Group Current, Interval, and Running Counts
-- 11/19/09 glf added OIDs to provision LCP and NCP alarm enable and suppression
-- 11/08/10 nra added OIDs for IPv6 support
-- 03/02/11 nra added adGenPppGroupIpv6NCPState OID
-- ******************************************************************************************
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
TimeTicks, Integer32,IpAddress,Unsigned32,NOTIFICATION-TYPE,
Counter32,Gauge32
FROM SNMPv2-SMI
sysName
FROM SNMPv2-MIB
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
InetAddressIPv6
FROM INET-ADDRESS-MIB
ifIndex,
InterfaceIndex
FROM IF-MIB
adGenSlotInfoIndex
FROM ADTRAN-GENSLOT-MIB
adGenPpp, adGenPppID
FROM ADTRAN-GENTA5K-MIB
adTrapInformSeqNum
FROM ADTRAN-GENTRAPINFORM-MIB
adTAeSCUTrapAlarmLevel
FROM ADTRAN-TAeSCUEXT1-MIB
adGenPortTrapIdentifier
FROM ADTRAN-GENPORT-MIB
;
adGenPppMIB MODULE-IDENTITY
LAST-UPDATED "200911190000Z"
ORGANIZATION
"ADTRAN, Inc."
CONTACT-INFO
"CND Tech Support
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726-8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"Generic PPP MIB"
::= {adGenPppID 1}
-- OBJECT IDENTIFIERS
adGenPppMIBObjects OBJECT IDENTIFIER ::= {adGenPpp 1}
adGenPppLinkObjects OBJECT IDENTIFIER ::= {adGenPppMIBObjects 1}
adGenPppLinkProv OBJECT IDENTIFIER ::= {adGenPppLinkObjects 1}
adGenPppLinkStatus OBJECT IDENTIFIER ::= {adGenPppLinkObjects 2}
adGenPppLinkPerfStats OBJECT IDENTIFIER ::= {adGenPppLinkObjects 3}
adGenPppGroupObjects OBJECT IDENTIFIER ::= {adGenPppMIBObjects 2}
adGenPppGroupProv OBJECT IDENTIFIER ::= {adGenPppGroupObjects 1}
adGenPppGroupStatus OBJECT IDENTIFIER ::= {adGenPppGroupObjects 2}
adGenPppGroupPerfStats OBJECT IDENTIFIER ::= {adGenPppGroupObjects 3}
adGenPppAlarmsPrefix OBJECT IDENTIFIER ::= {adGenPpp 2}
adGenPppAlarms OBJECT IDENTIFIER ::= {adGenPppAlarmsPrefix 0}
-- **********************************************************************
-- PPP Link Alarm Provision Table
-- **********************************************************************
adGenPppLinkAlarmProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkAlarmProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"..."
::= { adGenPppLinkProv 1 }
adGenPppLinkAlarmProvEntry OBJECT-TYPE
SYNTAX AdGenPppLinkAlarmProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adGenSlotInfoIndex }
::= { adGenPppLinkAlarmProvTable 1 }
AdGenPppLinkAlarmProvEntry ::=
SEQUENCE {
adGenPppLinkAlarmProvLCPAlarmSeverity INTEGER,
adGenPppLinkAlarmProvLCPAlarmSuppression INTEGER,
adGenPppLinkAlarmProvLCPAlarmEnable TruthValue
}
adGenPppLinkAlarmProvLCPAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the LCP Down Alarm Severity"
DEFVAL { major }
::= { adGenPppLinkAlarmProvEntry 1 }
adGenPppLinkAlarmProvLCPAlarmSuppression OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit Map that Enables/Disables SNMP and TL1 LCP Alarm suppression (affects all Links
on the card). With suppression enabled, the alarm will still appear in the alarm log.
LSB Bit 0: 0 - Disable SNMP Alarm suppression, 1 - Enable SNMP Alarm suppression
Bit 1: 0 - Disable TL1 Alarm suppression, 1 - Enable TL1 Alarm suppression"
DEFVAL {0}
::= { adGenPppLinkAlarmProvEntry 2 }
adGenPppLinkAlarmProvLCPAlarmEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True - activates the alarm (affects all Links on the card). False - deactivates the
alarm, meaning it will not go out via any protocol AND it will not appear in the
alarm log."
DEFVAL {true}
::= { adGenPppLinkAlarmProvEntry 3 }
-- **********************************************************************
-- PPP Link Status Table
-- **********************************************************************
adGenPppLinkStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"..."
::= { adGenPppLinkStatus 1 }
adGenPppLinkStatusEntry OBJECT-TYPE
SYNTAX AdGenPppLinkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table indexed using the Link ifIndex"
INDEX { ifIndex }
::= { adGenPppLinkStatusTable 1 }
AdGenPppLinkStatusEntry ::=
SEQUENCE {
adGenPppLinkOperStatus INTEGER,
adGenPppLinkCurrentLCPState INTEGER,
adGenPppLinkNegotiatedStatus DisplayString
}
adGenPppLinkOperStatus OBJECT-TYPE
SYNTAX INTEGER {
opened(1),
notopened(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the LCP
protocol."
::= { adGenPppLinkStatusEntry 1 }
adGenPppLinkCurrentLCPState OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
starting(2),
closed(3),
stopped(4),
closing(5),
stopping(6),
reqsent(7),
ackrcvd(8),
acksent(9),
opened(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the current LCP state"
::= { adGenPppLinkStatusEntry 2 }
adGenPppLinkNegotiatedStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A String Displaying Negotiated Information at the Link Level
The format of the string is split into records that are strings themselves
split using the ASCII character record separator (hex 0x1E, decimal 30)
Each Record is formatted: 'Record Name:Record Value'
ex) LCP State:OPENED<RS>Local/Remote FCS Size:16/16<RS>
This string response can grow over-time for future debug information."
::= { adGenPppLinkStatusEntry 3 }
-- **********************************************************************
-- PPP Link Stats Table
-- **********************************************************************
--
-- The PPP Link Performance subtree
--
-- The PPP Link Performance subtree consists of a table of PPP links. Each entry
-- in the table contains status information about a link which is part
-- of an PPP group, and also contains a configuration object to select
-- which PPP group the link belongs.
--
adGenPppLinkPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Link Performance table."
::= { adGenPppLinkPerfStats 1 }
adGenPppLinkPerfEntry OBJECT-TYPE
SYNTAX AdGenPppLinkPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Link Performance table.
This table is index using the ifIndex of the PPP Link"
INDEX { ifIndex }
::= { adGenPppLinkPerfTable 1 }
AdGenPppLinkPerfEntry ::= SEQUENCE {
adGenPppLinkInOctets Counter32,
adGenPppLinkInGoodOctets Counter32,
adGenPppLinkInPkts Counter32,
adGenPppLinkInDiscards Counter32,
adGenPppLinkInErrors Counter32,
adGenPppLinkOutOctets Counter32,
adGenPppLinkOutPkts Counter32,
adGenPppLinkOutDiscards Counter32,
adGenPppLinkOutErrors Counter32,
adGenPppLinkValidIntervals INTEGER,
adGenPppLinkInvalidIntervals INTEGER,
adGenPppLinkTimeElapsed INTEGER,
adGenPppLinkResetStats INTEGER,
adGenPppLinkResetPerfHistory INTEGER
}
adGenPppLinkInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Link"
::= { adGenPppLinkPerfEntry 1 }
adGenPppLinkInGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of good bytes received from the PPP Link"
::= { adGenPppLinkPerfEntry 2 }
adGenPppLinkInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Link"
::= { adGenPppLinkPerfEntry 3 }
adGenPppLinkInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded"
::= { adGenPppLinkPerfEntry 4 }
adGenPppLinkInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors"
::= { adGenPppLinkPerfEntry 5 }
adGenPppLinkOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Link"
::= { adGenPppLinkPerfEntry 6 }
adGenPppLinkOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Link"
::= { adGenPppLinkPerfEntry 7 }
adGenPppLinkOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded"
::= { adGenPppLinkPerfEntry 8 }
adGenPppLinkOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted because of errors."
::= { adGenPppLinkPerfEntry 9 }
adGenPppLinkValidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous 15 minute intervals for which valid data
was collected. "
::= { adGenPppLinkPerfEntry 10 }
adGenPppLinkInvalidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of intervals in the range for which no data is
available. "
::= { adGenPppLinkPerfEntry 11 }
adGenPppLinkTimeElapsed OBJECT-TYPE
SYNTAX INTEGER (0..899)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period."
::= { adGenPppLinkPerfEntry 12 }
adGenPppLinkResetStats OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a value of 1 resets the statistics in this table for this
link. It does not affect performance history in other tables."
::= { adGenPppLinkPerfEntry 13 }
adGenPppLinkResetPerfHistory OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a value of 1 resets the performance history for this link
in adGenPppLinkCurrentTable, adGenPppLinkIntervalTable, and
adGenPppLinkTotalTable. It does not affect the statistics
in adGenPppLinkPerfTable."
::= { adGenPppLinkPerfEntry 14 }
-- The PPP Link Current Statistics subtree consists of a single table:
-- the PPP Link Current Table. This table contains various statistics
-- collected by each PPP link for the current 15 minute interval.
adGenPppLinkCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Link Current table."
::= { adGenPppLinkPerfStats 2 }
adGenPppLinkCurrentEntry OBJECT-TYPE
SYNTAX AdGenPppLinkCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Link Current table."
INDEX { ifIndex }
::= { adGenPppLinkCurrentTable 1 }
AdGenPppLinkCurrentEntry ::= SEQUENCE {
adGenPppLinkCurrentInOctets Gauge32,
adGenPppLinkCurrentInGoodOctets Gauge32,
adGenPppLinkCurrentInPkts Gauge32,
adGenPppLinkCurrentInDiscards Gauge32,
adGenPppLinkCurrentInErrors Gauge32,
adGenPppLinkCurrentOutOctets Gauge32,
adGenPppLinkCurrentOutPkts Gauge32,
adGenPppLinkCurrentOutDiscards Gauge32,
adGenPppLinkCurrentOutErrors Gauge32
}
adGenPppLinkCurrentInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Link, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 1 }
adGenPppLinkCurrentInGoodOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of good bytes received from the PPP Link, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 2 }
adGenPppLinkCurrentInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Link, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 3 }
adGenPppLinkCurrentInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 4 }
adGenPppLinkCurrentInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 5 }
adGenPppLinkCurrentOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Link, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 6 }
adGenPppLinkCurrentOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Link, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 7 }
adGenPppLinkCurrentOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 8 }
adGenPppLinkCurrentOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in the current 15 minute interval."
::= { adGenPppLinkCurrentEntry 9 }
-- The PPP Link Interval Statistics subtree consists of a single table:
-- the PPP Link Interval Table. This table contains various statistics
-- collected by each PPP link over the previous 24 hours of operation.
-- The past 24 hours are broken into 96 completed 15 minute intervals.
adGenPppLinkIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Link Interval table."
::= { adGenPppLinkPerfStats 3 }
adGenPppLinkIntervalEntry OBJECT-TYPE
SYNTAX AdGenPppLinkIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Link Interval table."
INDEX { ifIndex, adGenPppLinkIntervalNumber }
::= { adGenPppLinkIntervalTable 1 }
AdGenPppLinkIntervalEntry ::= SEQUENCE {
adGenPppLinkIntervalNumber INTEGER,
adGenPppLinkIntervalInOctets Gauge32,
adGenPppLinkIntervalInGoodOctets Gauge32,
adGenPppLinkIntervalInPkts Gauge32,
adGenPppLinkIntervalInDiscards Gauge32,
adGenPppLinkIntervalInErrors Gauge32,
adGenPppLinkIntervalOutOctets Gauge32,
adGenPppLinkIntervalOutPkts Gauge32,
adGenPppLinkIntervalOutDiscards Gauge32,
adGenPppLinkIntervalOutErrors Gauge32,
adGenPppLinkIntervalTimeStamp DisplayString
}
adGenPppLinkIntervalNumber OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least
recently completed 15 minutes interval (assuming that all
96 intervals are valid)."
::= { adGenPppLinkIntervalEntry 1 }
adGenPppLinkIntervalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Link, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 2 }
adGenPppLinkIntervalInGoodOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of good bytes received from the PPP Link, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 3 }
adGenPppLinkIntervalInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Link, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 4 }
adGenPppLinkIntervalInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 5 }
adGenPppLinkIntervalInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 6 }
adGenPppLinkIntervalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Link, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 7 }
adGenPppLinkIntervalOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Link, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 8 }
adGenPppLinkIntervalOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 9 }
adGenPppLinkIntervalOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in one of the previous 96, individual 15 minute, intervals."
::= { adGenPppLinkIntervalEntry 10 }
adGenPppLinkIntervalTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the 15-minute interval"
::= { adGenPppLinkIntervalEntry 11 }
--
-- The PPP Link Total Statistics subtree consists of a single table:
-- the PPP Link Total Table. This table contains the cumulative sum
-- of the various statistics collected by each PPP link for the 24 hour
-- period preceding the current interval.
adGenPppLinkTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Link Total table."
::= { adGenPppLinkPerfStats 4 }
adGenPppLinkTotalEntry OBJECT-TYPE
SYNTAX AdGenPppLinkTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Link Total table."
INDEX { ifIndex }
::= { adGenPppLinkTotalTable 1 }
AdGenPppLinkTotalEntry ::= SEQUENCE {
adGenPppLinkTotalInOctets Gauge32,
adGenPppLinkTotalInGoodOctets Gauge32,
adGenPppLinkTotalInPkts Gauge32,
adGenPppLinkTotalInDiscards Gauge32,
adGenPppLinkTotalInErrors Gauge32,
adGenPppLinkTotalOutOctets Gauge32,
adGenPppLinkTotalOutPkts Gauge32,
adGenPppLinkTotalOutDiscards Gauge32,
adGenPppLinkTotalOutErrors Gauge32
}
adGenPppLinkTotalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Link, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 1 }
adGenPppLinkTotalInGoodOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of good bytes received from the PPP Link, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 2 }
adGenPppLinkTotalInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Link, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 3 }
adGenPppLinkTotalInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 4 }
adGenPppLinkTotalInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 5 }
adGenPppLinkTotalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Link, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 6 }
adGenPppLinkTotalOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Link, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 7 }
adGenPppLinkTotalOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 8 }
adGenPppLinkTotalOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in the previous 24 hour interval."
::= { adGenPppLinkTotalEntry 9 }
-- The PPP Link Current Day Statistics subtree consists of a single table:
-- the PPP Link Current Day Table. This table contains the cumulative sum
-- of the various statistics collected by each PPP link for the current
-- 24 hour period.
adGenPppLinkDayCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkDayCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Link Current Day table."
::= { adGenPppLinkPerfStats 5 }
adGenPppLinkDayCurrentEntry OBJECT-TYPE
SYNTAX AdGenPppLinkDayCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Link Current Day table."
INDEX { ifIndex }
::= { adGenPppLinkDayCurrentTable 1 }
AdGenPppLinkDayCurrentEntry ::= SEQUENCE {
adGenPppLinkDayCurrentInOctets Gauge32,
adGenPppLinkDayCurrentInGoodOctets Gauge32,
adGenPppLinkDayCurrentInPkts Gauge32,
adGenPppLinkDayCurrentInDiscards Gauge32,
adGenPppLinkDayCurrentInErrors Gauge32,
adGenPppLinkDayCurrentOutOctets Gauge32,
adGenPppLinkDayCurrentOutPkts Gauge32,
adGenPppLinkDayCurrentOutDiscards Gauge32,
adGenPppLinkDayCurrentOutErrors Gauge32
}
adGenPppLinkDayCurrentInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Link, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 1 }
adGenPppLinkDayCurrentInGoodOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of good bytes received from the PPP Link, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 2 }
adGenPppLinkDayCurrentInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Link, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 3 }
adGenPppLinkDayCurrentInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 4 }
adGenPppLinkDayCurrentInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 5 }
adGenPppLinkDayCurrentOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Link, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 6 }
adGenPppLinkDayCurrentOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Link, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 7 }
adGenPppLinkDayCurrentOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 8 }
adGenPppLinkDayCurrentOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in the current 24 hour interval."
::= { adGenPppLinkDayCurrentEntry 9 }
-- The PPP Link Daily Interval Statistics subtree consists of a single table:
-- the PPP Link Daily Interval Table. This table contains the cumulative sum
-- of the various statistics collected by each PPP link for the 24 hour
-- period preceding the current interval.
adGenPppLinkDayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppLinkDayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Link Daily Interval table."
::= { adGenPppLinkPerfStats 6 }
adGenPppLinkDayIntervalEntry OBJECT-TYPE
SYNTAX AdGenPppLinkDayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Link Daily Interval table."
INDEX { ifIndex, adGenPppLinkDayIntervalNumber }
::= { adGenPppLinkDayIntervalTable 1 }
AdGenPppLinkDayIntervalEntry ::= SEQUENCE {
adGenPppLinkDayIntervalNumber INTEGER,
adGenPppLinkDayIntervalInOctets Gauge32,
adGenPppLinkDayIntervalInGoodOctets Gauge32,
adGenPppLinkDayIntervalInPkts Gauge32,
adGenPppLinkDayIntervalInDiscards Gauge32,
adGenPppLinkDayIntervalInErrors Gauge32,
adGenPppLinkDayIntervalOutOctets Gauge32,
adGenPppLinkDayIntervalOutPkts Gauge32,
adGenPppLinkDayIntervalOutDiscards Gauge32,
adGenPppLinkDayIntervalOutErrors Gauge32,
adGenPppLinkDayIntervalTimeStamp DisplayString
}
adGenPppLinkDayIntervalNumber OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 7, where 1 is the most
recently completed 24 hour interval and 7 is the least
recently completed 24 hour interval (assuming that all
7 intervals are valid)."
::= { adGenPppLinkDayIntervalEntry 1 }
adGenPppLinkDayIntervalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Link, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 2 }
adGenPppLinkDayIntervalInGoodOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of good bytes received from the PPP Link, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 3 }
adGenPppLinkDayIntervalInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Link, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 4 }
adGenPppLinkDayIntervalInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 5 }
adGenPppLinkDayIntervalInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
hour intervals."
::= { adGenPppLinkDayIntervalEntry 6 }
adGenPppLinkDayIntervalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Link, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 7 }
adGenPppLinkDayIntervalOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Link, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 8 }
adGenPppLinkDayIntervalOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 9 }
adGenPppLinkDayIntervalOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in 24 hour intervals."
::= { adGenPppLinkDayIntervalEntry 10 }
adGenPppLinkDayIntervalTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of 24 hour period (Date)"
::= { adGenPppLinkDayIntervalEntry 11 }
-- **********************************************************************
-- Configuration
-- **********************************************************************
-- PPP Group Provisioning
--
adGenPppGroupProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ppp Group Provisioning Table."
::= { adGenPppGroupProv 1 }
adGenPppGroupProvEntry OBJECT-TYPE
SYNTAX AdGenPppGroupProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Provisioning Table. This table contains
provisioning for the links that are in the group.
This table is indexed by the PPP Group ifIndex"
INDEX {ifIndex }
::= { adGenPppGroupProvTable 1 }
AdGenPppGroupProvEntry ::=
SEQUENCE {
adGenPppGroupSubscriberIpAddress IpAddress,
adGenPppGroupGatewayIpAddress IpAddress,
adGenPppGroupPrimaryDNSIpAddress IpAddress,
adGenPppGroupSecondaryDNSIpAddress IpAddress,
adGenPppGroupConfigInitialMRU INTEGER,
adGenPppGroupConfigMagicNumber TruthValue,
adGenPppGroupConfigFcsSize INTEGER,
adGenPppGroupConfigACCompression TruthValue,
adGenPppGroupConfigPFCompression TruthValue,
adGenPppGroupConfigLQM TruthValue,
adGenPppGroupConfigRestartTimer INTEGER,
adGenPppGroupConfigMaxTerminate INTEGER,
adGenPppGroupConfigMaxConfigure INTEGER,
adGenPppGroupConfigMaxFailure INTEGER,
adGenPppGroupConfigKeepAliveRate INTEGER,
adGenPppGroupChapEnabled TruthValue,
adGenPppGroupLocalUserName OCTET STRING,
adGenPppGroupLocalPassword OCTET STRING,
adGenPppGroupPeerUserName OCTET STRING,
adGenPppGroupPeerPassword OCTET STRING,
adGenPppGroupIpAddressAssignment INTEGER,
adGenPppGroupDhcpClientIdentfier OCTET STRING,
adGenPppGroupDhcpHostname DisplayString,
adGenPppGroupConfigMultilink TruthValue,
adGenPppGroupSubscriberIPv6Address InetAddressIPv6,
adGenPppGroupGatewayIPv6AddressAssignment INTEGER,
adGenPppGroupGatewayIPv6Address InetAddressIPv6,
adGenPppGroupIpEnabled TruthValue,
adGenPppGroupIpv6Enabled TruthValue
}
adGenPppGroupSubscriberIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address to be assigned to the Subscriber on the far end
of this PPP Group."
::= { adGenPppGroupProvEntry 1 }
adGenPppGroupGatewayIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Gateway assigned to this PPP Group"
::= { adGenPppGroupProvEntry 2 }
adGenPppGroupPrimaryDNSIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary DNS Server."
::= { adGenPppGroupProvEntry 3 }
adGenPppGroupSecondaryDNSIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary DNS Server."
::= { adGenPppGroupProvEntry 4 }
adGenPppGroupConfigInitialMRU OBJECT-TYPE
SYNTAX INTEGER(0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initial Maximum Receive Unit (MRU) that
the local PPP entity will advertise to the
remote entity. If the value of this variable is
0 then the local PPP entity will not advertise
any MRU to the remote entity and the default
MRU will be assumed. Changing this object will
have effect when the link is next restarted."
DEFVAL { 1500 }
::= { adGenPppGroupProvEntry 5 }
adGenPppGroupConfigMagicNumber OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true then the local node will attempt to
perform Magic Number negotiation with the
remote node. If false then this negotiation
is not performed. In any event, the local node
will comply with any magic number negotiations
attempted by the remote node, per the PPP
specification. Changing this object will have
effect when the link is next restarted."
DEFVAL { false }
::= { adGenPppGroupProvEntry 6 }
adGenPppGroupConfigFcsSize OBJECT-TYPE
SYNTAX INTEGER {
zerobits(1),
sixteenbits(2),
thirtytwobits(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the FCS, in bits, the local node
will attempt to negotiate for use with the
remote node. Regardless of the value of this
object, the local node will comply with any FCS
size negotiations initiated by the remote node,
per the PPP specification. Changing this object
will have effect when the link is next
restarted."
DEFVAL { sixteenbits }
::= { adGenPppGroupProvEntry 7 }
adGenPppGroupConfigACCompression OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, ACFC negotiation is enabled"
DEFVAL { false }
::= { adGenPppGroupProvEntry 8 }
adGenPppGroupConfigPFCompression OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, PFC negotiation is enabled"
DEFVAL { false }
::= { adGenPppGroupProvEntry 9 }
adGenPppGroupConfigLQM OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, Link Quality Reports will be sent
when LQRs are received"
DEFVAL { true }
::= { adGenPppGroupProvEntry 10 }
adGenPppGroupConfigRestartTimer OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Restart timer is used to time transmissions of
Configure-Request and Terminate-Request packets. Expiration
of the Restart Timer causes a retransmission of the corresponding
Configure-Request or Terminate-Request packet"
DEFVAL { 3 }
::= { adGenPppGroupProvEntry 11 }
adGenPppGroupConfigMaxTerminate OBJECT-TYPE
SYNTAX INTEGER (2..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max-Terminate indicates the number of Terminate-Request
packets sent without receiving a Terminate-Ack before assuming
that the peer is unable to respond"
DEFVAL { 2 }
::= { adGenPppGroupProvEntry 12 }
adGenPppGroupConfigMaxConfigure OBJECT-TYPE
SYNTAX INTEGER (2..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max-Configure indicates the number of Configure-Request
packets sent without receiving a valid Configure-Ack, Configure-Nak,
or Configure-Reject before assuming that the peer is unable to respond"
DEFVAL { 10 }
::= { adGenPppGroupProvEntry 13 }
adGenPppGroupConfigMaxFailure OBJECT-TYPE
SYNTAX INTEGER (2..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max-Failure indicates the number of Configure-Nak packets sent without
sending a Configure-Ack before assuming that configuration is not converging.
Any further Configure-Nak packets for peeer requested options are converted to
Configure-Reject packets, and locally desired options are no longer appended."
DEFVAL { 5 }
::= { adGenPppGroupProvEntry 14 }
adGenPppGroupConfigKeepAliveRate OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Keep Alive Rate sets the time between Echo Request transmissions"
DEFVAL { 10 }
::= { adGenPppGroupProvEntry 15 }
adGenPppGroupChapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables the PPP/CHAP AuthenticationProtocol."
DEFVAL { false }
::= { adGenPppGroupProvEntry 16 }
adGenPppGroupLocalUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The host/username provided to remote peer as this
system's host/username for PPP Authentication purposes."
DEFVAL { ''h }
::= { adGenPppGroupProvEntry 17 }
adGenPppGroupLocalPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The password/secret provided to remote peer as this
system's password/secret for PPP Authentication purposes."
DEFVAL { ''h }
::= { adGenPppGroupProvEntry 18 }
adGenPppGroupPeerUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The host/username expected to be received from the remote
peer as it's host/username for PPP Authentication purposes."
DEFVAL { ''h }
::= { adGenPppGroupProvEntry 19 }
adGenPppGroupPeerPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The password/secret expected to be received from the remote
peer as it's password/secret for PPP Authentication purposes."
DEFVAL { ''h }
::= { adGenPppGroupProvEntry 20 }
adGenPppGroupIpAddressAssignment OBJECT-TYPE
SYNTAX INTEGER {
staticIpv4(1),
dhcpv4(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the IP Address assignment policy for the peer. The value
can be one of the following:
staticIpv4 Statically provisioned IPv4 address are assigned.
dhcpv4 A DHCP client is used to obtain the peer IP address, default
gateway (router) IP address(es), and DNS name server
address(es)."
DEFVAL { staticIpv4 }
::= { adGenPppGroupProvEntry 21 }
adGenPppGroupDhcpClientIdentfier OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the client identifier (DHCP Option 61) used when obtaining
an IP address from a DHCP server."
::= { adGenPppGroupProvEntry 22 }
adGenPppGroupDhcpHostname OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..35))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the text string used as the name in the DHCP option 12 field.
The can consist of up to 35 characters. To reset the hostname to it's
system generated (non-empty) default, write a zero-length (empty)
string to this location."
::= { adGenPppGroupProvEntry 23 }
adGenPppGroupConfigMultilink OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Multilink PPP operation. This includes utilizing all
configured and operational links and fragmenting PPP frames
to reduce latency."
DEFVAL { false }
::= { adGenPppGroupProvEntry 24 }
adGenPppGroupSubscriberIPv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 address of the subscriber on the far end
of this PPP Group."
::= { adGenPppGroupProvEntry 25 }
adGenPppGroupGatewayIPv6AddressAssignment OBJECT-TYPE
SYNTAX INTEGER {
static(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 address assignment policy for the default gateway. The value
can be one of the following:
static Gateway address is statically provisioned.
auto Gateway address will be automatically learned via NDP."
::= { adGenPppGroupProvEntry 26 }
adGenPppGroupGatewayIPv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 address of the gateway assigned to this PPP Group. The meaning
is dependent on current value of adGenPppGroupGatewayIPv6AddressAssignment.
For static mode, this OID is read/write and indicates the manually-assigned
IPv6 gateway address. For auto mode, this OID is read-only and indicates
the IPv6 address of the default gateway learned through NDP. Sets to this
OID in auto mode will return an error."
::= { adGenPppGroupProvEntry 27 }
adGenPppGroupIpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not IPv4 operation is enabled for this PPP Group."
::= { adGenPppGroupProvEntry 28 }
adGenPppGroupIpv6Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not IPv6 operation is enabled for this PPP Group."
::= { adGenPppGroupProvEntry 29 }
-- **********************************************************************
-- PPP Group Alarm Provision Table
-- **********************************************************************
adGenPppGroupAlarmProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupAlarmProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"..."
::= { adGenPppGroupProv 2 }
adGenPppGroupAlarmProvEntry OBJECT-TYPE
SYNTAX AdGenPppGroupAlarmProvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adGenSlotInfoIndex }
::= { adGenPppGroupAlarmProvTable 1 }
AdGenPppGroupAlarmProvEntry ::=
SEQUENCE {
adGenPppGroupAlarmProvNCPAlarmSeverity INTEGER,
adGenPppGroupAlarmProvNCPAlarmSuppression INTEGER,
adGenPppGroupAlarmProvNCPAlarmEnable TruthValue,
adGenPppGroupAlarmProvIpv6NcpAlarmSeverity INTEGER,
adGenPppGroupAlarmProvIpv6NcpAlarmSuppression INTEGER,
adGenPppGroupAlarmProvIpv6NcpAlarmEnable TruthValue,
adGenPppGroupAlarmProvIpv6AddrMismatchAlarmSeverity INTEGER,
adGenPppGroupAlarmProvIpv6AddrMismatchAlarmSuppression INTEGER,
adGenPppGroupAlarmProvIpv6AddrMismatchAlarmEnable TruthValue,
adGenPppGroupAlarmProvIpv6GatewayAddrMismatchAlarmSeverity INTEGER,
adGenPppGroupAlarmProvIpv6GatewayAddrMismatchAlarmSuppression INTEGER,
adGenPppGroupAlarmProvIpv6GatewayAddrMismatchAlarmEnable TruthValue
}
adGenPppGroupAlarmProvNCPAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the NCP Down Alarm Active Severity"
DEFVAL { major }
::= { adGenPppGroupAlarmProvEntry 1 }
adGenPppGroupAlarmProvNCPAlarmSuppression OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit Map that Enables/Disables SNMP and TL1 NCP Alarm suppression (affects all Groups
on the card). With suppression enabled, the alarm will still appear in the alarm log.
LSB Bit 0: 0 - Disable SNMP Alarm suppression, 1 - Enable SNMP Alarm suppression
Bit 1: 0 - Disable TL1 Alarm suppression, 1 - Enable TL1 Alarm suppression"
DEFVAL {0}
::= { adGenPppGroupAlarmProvEntry 2 }
adGenPppGroupAlarmProvNCPAlarmEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True - activates the alarm (affects all Groups on the card). False - deactivates the
alarm, meaning it will not go out via any protocol AND it will not appear in the
alarm log."
DEFVAL {true}
::= { adGenPppGroupAlarmProvEntry 3 }
adGenPppGroupAlarmProvIpv6NcpAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the IPv6 NCP Down Alarm Active Severity"
DEFVAL { major }
::= { adGenPppGroupAlarmProvEntry 4 }
adGenPppGroupAlarmProvIpv6NcpAlarmSuppression OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit Map that Enables/Disables SNMP and TL1 IPv6 NCP Alarm suppression (affects all Groups
on the card). With suppression enabled, the alarm will still appear in the alarm log.
LSB Bit 0: 0 - Disable SNMP Alarm suppression, 1 - Enable SNMP Alarm suppression
Bit 1: 0 - Disable TL1 Alarm suppression, 1 - Enable TL1 Alarm suppression"
DEFVAL {0}
::= { adGenPppGroupAlarmProvEntry 5 }
adGenPppGroupAlarmProvIpv6NcpAlarmEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True - activates the alarm (affects all Groups on the card). False - deactivates the
alarm, meaning it will not go out via any protocol AND it will not appear in the
alarm log."
DEFVAL {true}
::= { adGenPppGroupAlarmProvEntry 6 }
adGenPppGroupAlarmProvIpv6AddrMismatchAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the IPv6 Peer Address Mismatch Alarm Active Severity"
DEFVAL { major }
::= { adGenPppGroupAlarmProvEntry 7 }
adGenPppGroupAlarmProvIpv6AddrMismatchAlarmSuppression OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit Map that Enables/Disables SNMP and TL1 IPv6 Peer Address Mismatch Alarm
suppression (affects all Groups on the card). With suppression enabled, the
alarm will still appear in the alarm log.
LSB Bit 0: 0 - Disable SNMP Alarm suppression, 1 - Enable SNMP Alarm suppression
Bit 1: 0 - Disable TL1 Alarm suppression, 1 - Enable TL1 Alarm suppression"
DEFVAL {0}
::= { adGenPppGroupAlarmProvEntry 8 }
adGenPppGroupAlarmProvIpv6AddrMismatchAlarmEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True - activates the alarm (affects all Groups on the card). False - deactivates the
alarm, meaning it will not go out via any protocol AND it will not appear in the
alarm log."
DEFVAL {true}
::= { adGenPppGroupAlarmProvEntry 9 }
adGenPppGroupAlarmProvIpv6GatewayAddrMismatchAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the IPv6 Gateway Address Mismatch Alarm Active Severity"
DEFVAL { major }
::= { adGenPppGroupAlarmProvEntry 10 }
adGenPppGroupAlarmProvIpv6GatewayAddrMismatchAlarmSuppression OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit Map that Enables/Disables SNMP and TL1 IPv6 Gateway Address Mismatch Alarm
suppression (affects all Groups on the card). With suppression enabled, the
alarm will still appear in the alarm log.
LSB Bit 0: 0 - Disable SNMP Alarm suppression, 1 - Enable SNMP Alarm suppression
Bit 1: 0 - Disable TL1 Alarm suppression, 1 - Enable TL1 Alarm suppression"
DEFVAL {0}
::= { adGenPppGroupAlarmProvEntry 11 }
adGenPppGroupAlarmProvIpv6GatewayAddrMismatchAlarmEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True - activates the alarm (affects all Groups on the card). False - deactivates the
alarm, meaning it will not go out via any protocol AND it will not appear in the
alarm log."
DEFVAL {true}
::= { adGenPppGroupAlarmProvEntry 12 }
-- **********************************************************************
-- PPP Group Status Table
-- **********************************************************************
adGenPppGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"..."
::= { adGenPppGroupStatus 1 }
adGenPppGroupStatusEntry OBJECT-TYPE
SYNTAX AdGenPppGroupStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table indexed using the PPP Group ifIndex"
INDEX { ifIndex }
::= { adGenPppGroupStatusTable 1 }
AdGenPppGroupStatusEntry ::=
SEQUENCE {
adGenPppGroupNCPState INTEGER,
adGenPppGroupCurrentSubscriberIpAddress IpAddress,
adGenPppGroupCurrentGatewayIpAddress IpAddress,
adGenPppGroupCurrentPrimaryDNSIpAddress IpAddress,
adGenPppGroupCurrentSecondaryDNSIpAddress IpAddress,
adGenPppGroupNegotiatedStatus DisplayString,
adGenPppGroupIPv6AddressStatus INTEGER,
adGenPppGroupIPv6GatewayAddressStatus INTEGER,
adGenPppGroupIPv6NCPState INTEGER
}
adGenPppGroupNCPState OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
starting(2),
closed(3),
stopped(4),
closing(5),
stopping(6),
reqsent(7),
ackrcvd(8),
acksent(9),
opened(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current PPP Group NCP state"
::= { adGenPppGroupStatusEntry 1 }
adGenPppGroupCurrentSubscriberIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address assigned to the Subscriber on the far end
of this PPP Group."
::= { adGenPppGroupStatusEntry 2 }
adGenPppGroupCurrentGatewayIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address of the Gateway assigned to this PPP Group"
::= { adGenPppGroupStatusEntry 3 }
adGenPppGroupCurrentPrimaryDNSIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address of the Primary DNS Server."
::= { adGenPppGroupStatusEntry 4 }
adGenPppGroupCurrentSecondaryDNSIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address of the Secondary DNS Server."
::= { adGenPppGroupStatusEntry 5 }
adGenPppGroupNegotiatedStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A String Displaying Negotiated Information at the Group Level
The format of the string is split into records that are strings themselves
split using the ASCII character record separator (hex 0x1E, decimal 30)
Each Record is formatted: 'Record Name:Record Value'
ex) Multilink:accepted<RS>Number of Active Links:1<RS>
This string response can grow over-time for future debug information."
::= { adGenPppGroupStatusEntry 6 }
adGenPppGroupIPv6AddressStatus OBJECT-TYPE
SYNTAX INTEGER {
unverified(1),
verified(2),
mismatch(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the provisioned IPv6 address of the peer and the
auto-detected IPv6 address of the peer. It can take 3 values:
unverified The IPv6 address of the peer has not been successfully
detected, so the current status is unknown.
verified The IPv6 address of the peer has been successfully detected
and verified to match the provisioned address.
mismatch The IPv6 address of the peer has been successfully detected
and it does not match the provisioned address."
::= { adGenPppGroupStatusEntry 7 }
adGenPppGroupIPv6GatewayAddressStatus OBJECT-TYPE
SYNTAX INTEGER {
unverified(1),
verified(2),
mismatch(3),
na(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the provisioned IPv6 default gatweay address
and the auto-detected IPv6 default gateway address. It can take 4 values:
unverified The IPv6 address of the default gateway has not been
successfully detected, so the current status is unknown.
verified The IPv6 address of the default gateway has been
successfully detected and verified to match the provisioned
address.
mismatch The IPv6 address of the default gateway has been
successfully detected and it does not match the provisioned
address.
na This OID is not applicable because the
adGenPppGroupGatewayIPv6AddressAssignment mode is set to
auto."
::= { adGenPppGroupStatusEntry 8 }
adGenPppGroupIPv6NCPState OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
starting(2),
closed(3),
stopped(4),
closing(5),
stopping(6),
reqsent(7),
ackrcvd(8),
acksent(9),
opened(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current PPP Group IPv6 NCP (IPv6CP) state"
::= { adGenPppGroupStatusEntry 9 }
-- **********************************************************************
-- PPP Group Performance Stats
-- **********************************************************************
--
-- The PPP Group Performance Table
--
-- The PPP Group Performance subtree consists of a table of PPP groups.
-- Each entry in the table of PPP groups contains performance information
-- specific to each group.
--
adGenPppGroupPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Group Performance table."
::= { adGenPppGroupPerfStats 1 }
adGenPppGroupPerfEntry OBJECT-TYPE
SYNTAX AdGenPppGroupPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Performance table."
INDEX { ifIndex }
::= { adGenPppGroupPerfTable 1 }
AdGenPppGroupPerfEntry ::= SEQUENCE {
adGenPppGroupInOctets Counter32,
adGenPppGroupInPkts Counter32,
adGenPppGroupInDiscards Counter32,
adGenPppGroupInErrors Counter32,
adGenPppGroupOutOctets Counter32,
adGenPppGroupOutPkts Counter32,
adGenPppGroupOutDiscards Counter32,
adGenPppGroupOutErrors Counter32,
adGenPppGroupValidIntervals INTEGER,
adGenPppGroupInvalidIntervals INTEGER,
adGenPppGroupTimeElapsed INTEGER,
adGenPppGroupResetStats INTEGER,
adGenPppGroupResetPerfHistory INTEGER,
adGenPppGroupInL3Pkts Counter32,
adGenPppGroupOutL3Pkts Counter32
}
adGenPppGroupInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Group"
::= { adGenPppGroupPerfEntry 1 }
adGenPppGroupInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group"
::= { adGenPppGroupPerfEntry 2 }
adGenPppGroupInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded"
::= { adGenPppGroupPerfEntry 3 }
adGenPppGroupInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors"
::= { adGenPppGroupPerfEntry 4 }
adGenPppGroupOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Group"
::= { adGenPppGroupPerfEntry 5 }
adGenPppGroupOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Group"
::= { adGenPppGroupPerfEntry 6 }
adGenPppGroupOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded"
::= { adGenPppGroupPerfEntry 7 }
adGenPppGroupOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted because of errors."
::= { adGenPppGroupPerfEntry 8 }
adGenPppGroupValidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous 15 minute intervals for which valid data
was collected. "
::= { adGenPppGroupPerfEntry 9 }
adGenPppGroupInvalidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of intervals for which no data is
available. "
::= { adGenPppGroupPerfEntry 10 }
adGenPppGroupTimeElapsed OBJECT-TYPE
SYNTAX INTEGER (0..899)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period."
::= { adGenPppGroupPerfEntry 11 }
adGenPppGroupResetStats OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a value of 1 resets the statistics in this table for this
group. It does not affect performance history in other tables."
::= { adGenPppGroupPerfEntry 12 }
adGenPppGroupResetPerfHistory OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a value of 1 resets the performance history for this link
in adGenPppGroupCurrentTable, adGenPppGroupIntervalTable, and
adGenPppGroupTotalTable. It does not affect the statistics
in adGenPppGroupPerfTable."
::= { adGenPppGroupPerfEntry 13 }
adGenPppGroupInL3Pkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets received from the PPP Group"
::= { adGenPppGroupPerfEntry 14 }
adGenPppGroupOutL3Pkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets transmitted from the PPP Group"
::= { adGenPppGroupPerfEntry 15 }
--
-- The PPP Group Current Statistics subtree consists of a single table:
-- the PPP Group Current Table. This table contains various statistics
-- collected by each PPP link for the current 15 minute interval.
adGenPppGroupCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Group Current table."
::= { adGenPppGroupPerfStats 2 }
adGenPppGroupCurrentEntry OBJECT-TYPE
SYNTAX AdGenPppGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Current table."
INDEX { ifIndex }
::= { adGenPppGroupCurrentTable 1 }
AdGenPppGroupCurrentEntry ::= SEQUENCE {
adGenPppGroupCurrentInOctets Gauge32,
adGenPppGroupCurrentInPkts Gauge32,
adGenPppGroupCurrentInDiscards Gauge32,
adGenPppGroupCurrentInErrors Gauge32,
adGenPppGroupCurrentOutOctets Gauge32,
adGenPppGroupCurrentOutPkts Gauge32,
adGenPppGroupCurrentOutDiscards Gauge32,
adGenPppGroupCurrentOutErrors Gauge32,
adGenPppGroupCurrentInL3Pkts Gauge32,
adGenPppGroupCurrentOutL3Pkts Gauge32
}
adGenPppGroupCurrentInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 1 }
adGenPppGroupCurrentInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 2 }
adGenPppGroupCurrentInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 3 }
adGenPppGroupCurrentInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 4 }
adGenPppGroupCurrentOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Group, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 5 }
adGenPppGroupCurrentOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Group, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 6 }
adGenPppGroupCurrentOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 7 }
adGenPppGroupCurrentOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 8 }
adGenPppGroupCurrentInL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets received from the PPP Group, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 9 }
adGenPppGroupCurrentOutL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets transmitted from the PPP Group, in
the current 15 minute interval."
::= { adGenPppGroupCurrentEntry 10 }
-- The PPP Group Interval Statistics subtree consists of a single table:
-- the PPP Group Interval Table. This table contains various statistics
-- collected by each PPP Group over the previous 24 hours of operation.
-- The past 24 hours are broken into 96 completed 15 minute intervals.
adGenPppGroupIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Group Interval table."
::= { adGenPppGroupPerfStats 3 }
adGenPppGroupIntervalEntry OBJECT-TYPE
SYNTAX AdGenPppGroupIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Interval table."
INDEX { ifIndex, adGenPppGroupIntervalNumber }
::= { adGenPppGroupIntervalTable 1 }
AdGenPppGroupIntervalEntry ::= SEQUENCE {
adGenPppGroupIntervalNumber INTEGER,
adGenPppGroupIntervalInOctets Gauge32,
adGenPppGroupIntervalInPkts Gauge32,
adGenPppGroupIntervalInDiscards Gauge32,
adGenPppGroupIntervalInErrors Gauge32,
adGenPppGroupIntervalOutOctets Gauge32,
adGenPppGroupIntervalOutPkts Gauge32,
adGenPppGroupIntervalOutDiscards Gauge32,
adGenPppGroupIntervalOutErrors Gauge32,
adGenPppGroupIntervalTimeStamp DisplayString,
adGenPppGroupIntervalInL3Pkts Gauge32,
adGenPppGroupIntervalOutL3Pkts Gauge32
}
adGenPppGroupIntervalNumber OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least
recently completed 15 minutes interval (assuming that all
96 intervals are valid)."
::= { adGenPppGroupIntervalEntry 1 }
adGenPppGroupIntervalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Group, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 2 }
adGenPppGroupIntervalInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 3 }
adGenPppGroupIntervalInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 4 }
adGenPppGroupIntervalInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 5 }
adGenPppGroupIntervalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Group, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 6 }
adGenPppGroupIntervalOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Group, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 7 }
adGenPppGroupIntervalOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 8 }
adGenPppGroupIntervalOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 9 }
adGenPppGroupIntervalTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the 15-minute interval"
::= { adGenPppGroupIntervalEntry 10 }
adGenPppGroupIntervalInL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets received from the PPP Group, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 11 }
adGenPppGroupIntervalOutL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets transmitted out the PPP Group, in
one of the previous 96, individual 15 minute, intervals."
::= { adGenPppGroupIntervalEntry 12 }
--
-- The PPP Group Total Statistics subtree consists of a single table:
-- the PPP Group Total Table. This table contains the cumulative sum
-- of the various statistics collected by each PPP Group for the 24 hour
-- period preceding the current interval.
adGenPppGroupTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Group Total table."
::= { adGenPppGroupPerfStats 4 }
adGenPppGroupTotalEntry OBJECT-TYPE
SYNTAX AdGenPppGroupTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Total table."
INDEX { ifIndex }
::= { adGenPppGroupTotalTable 1 }
AdGenPppGroupTotalEntry ::= SEQUENCE {
adGenPppGroupTotalInOctets Gauge32,
adGenPppGroupTotalInPkts Gauge32,
adGenPppGroupTotalInDiscards Gauge32,
adGenPppGroupTotalInErrors Gauge32,
adGenPppGroupTotalOutOctets Gauge32,
adGenPppGroupTotalOutPkts Gauge32,
adGenPppGroupTotalOutDiscards Gauge32,
adGenPppGroupTotalOutErrors Gauge32,
adGenPppGroupTotalInL3Pkts Gauge32,
adGenPppGroupTotalOutL3Pkts Gauge32
}
adGenPppGroupTotalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Group, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 1 }
adGenPppGroupTotalInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 2 }
adGenPppGroupTotalInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 3 }
adGenPppGroupTotalInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 4 }
adGenPppGroupTotalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Group, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 5 }
adGenPppGroupTotalOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Group, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 6 }
adGenPppGroupTotalOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 7 }
adGenPppGroupTotalOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 8 }
adGenPppGroupTotalInL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets received from the PPP Group, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 9 }
adGenPppGroupTotalOutL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets transmitted from the PPP Group, in
the previous 24 hour interval."
::= { adGenPppGroupTotalEntry 10 }
-- The PPP Group Current Day Statistics subtree consists of a single table:
-- the PPP Group Current Day Table. This table contains the cumulative sum
-- of the various statistics collected by each PPP Group for the current
-- 24 hour period.
adGenPppGroupDayCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupDayCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Group Current Day table."
::= { adGenPppGroupPerfStats 5 }
adGenPppGroupDayCurrentEntry OBJECT-TYPE
SYNTAX AdGenPppGroupDayCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Current Day table."
INDEX { ifIndex }
::= { adGenPppGroupDayCurrentTable 1 }
AdGenPppGroupDayCurrentEntry ::= SEQUENCE {
adGenPppGroupDayCurrentInOctets Gauge32,
adGenPppGroupDayCurrentInPkts Gauge32,
adGenPppGroupDayCurrentInDiscards Gauge32,
adGenPppGroupDayCurrentInErrors Gauge32,
adGenPppGroupDayCurrentOutOctets Gauge32,
adGenPppGroupDayCurrentOutPkts Gauge32,
adGenPppGroupDayCurrentOutDiscards Gauge32,
adGenPppGroupDayCurrentOutErrors Gauge32,
adGenPppGroupDayCurrentInL3Pkts Gauge32,
adGenPppGroupDayCurrentOutL3Pkts Gauge32
}
adGenPppGroupDayCurrentInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of octets received from the PPP Group, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 1 }
adGenPppGroupDayCurrentInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 2 }
adGenPppGroupDayCurrentInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 3 }
adGenPppGroupDayCurrentInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 4 }
adGenPppGroupDayCurrentOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Group, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 5 }
adGenPppGroupDayCurrentOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Group, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 6 }
adGenPppGroupDayCurrentOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 7 }
adGenPppGroupDayCurrentOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 8 }
adGenPppGroupDayCurrentInL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets received out the PPP Group, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 9 }
adGenPppGroupDayCurrentOutL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets transmitted out the PPP Group, in
the current 24 hour interval."
::= { adGenPppGroupDayCurrentEntry 10 }
-- The PPP Group Daily Interval Statistics subtree consists of a single table:
-- the PPP Group Daily Interval Table. This table contains the cumulative sum
-- of the various statistics collected by each PPP Group for the 24 hour
-- period preceding the current interval.
adGenPppGroupDayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenPppGroupDayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPP Group Daily Interval table."
::= { adGenPppGroupPerfStats 6 }
adGenPppGroupDayIntervalEntry OBJECT-TYPE
SYNTAX AdGenPppGroupDayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the PPP Group Daily Interval table."
INDEX { ifIndex, adGenPppGroupDayIntervalNumber }
::= { adGenPppGroupDayIntervalTable 1 }
AdGenPppGroupDayIntervalEntry ::= SEQUENCE {
adGenPppGroupDayIntervalNumber INTEGER,
adGenPppGroupDayIntervalInOctets Gauge32,
adGenPppGroupDayIntervalInPkts Gauge32,
adGenPppGroupDayIntervalInDiscards Gauge32,
adGenPppGroupDayIntervalInErrors Gauge32,
adGenPppGroupDayIntervalOutOctets Gauge32,
adGenPppGroupDayIntervalOutPkts Gauge32,
adGenPppGroupDayIntervalOutDiscards Gauge32,
adGenPppGroupDayIntervalOutErrors Gauge32,
adGenPppGroupDayIntervalTimeStamp DisplayString,
adGenPppGroupDayIntervalInL3Pkts Gauge32,
adGenPppGroupDayIntervalOutL3Pkts Gauge32
}
adGenPppGroupDayIntervalNumber OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 7, where 1 is the most
recently completed 24 hour interval and 7 is the least
recently completed 24 hour interval (assuming that all
7 intervals are valid)."
::= { adGenPppGroupDayIntervalEntry 1 }
adGenPppGroupDayIntervalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes received from the PPP Group, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 2 }
adGenPppGroupDayIntervalInPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets received from the PPP Group, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 3 }
adGenPppGroupDayIntervalInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets chosen to be discarded, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 4 }
adGenPppGroupDayIntervalInErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of rx packets that contained errors, in
hour intervals."
::= { adGenPppGroupDayIntervalEntry 5 }
adGenPppGroupDayIntervalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of bytes transmitted out the PPP Group, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 6 }
adGenPppGroupDayIntervalOutPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of packets transmitted out the PPP Group, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 7 }
adGenPppGroupDayIntervalOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of out bound packets chosen to be discarded, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 8 }
adGenPppGroupDayIntervalOutErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of outbound packets that could not be transmitted
because of errors, in 24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 9 }
adGenPppGroupDayIntervalTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of 24 hour period (Date)"
::= { adGenPppGroupDayIntervalEntry 10 }
adGenPppGroupDayIntervalInL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets received from the PPP Group, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 11 }
adGenPppGroupDayIntervalOutL3Pkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of L3 packets transmitted from the PPP Group, in
24 hour intervals."
::= { adGenPppGroupDayIntervalEntry 12 }
-- **********************************************************************
-- Alarms
-- **********************************************************************
adGenPppLinkLcpDownAlarmClr NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPPPLinkLcpDownAlarm Clear is sent when the LCP state
machine is in the Opened (up) state."
--#TYPE "Major - PPP Lcp Down - Cleared"
--#SUMMARY "PPP Lcp Down - Cleared"
--#SUMMARY "cleared at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 2 }
adGenPppLinkLcpDownAlarmAct NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPPPLinkLcpDownAlarm Active is sent when the LCP state
machine is not in the Opened (up) state."
--#TYPE "Major - PPP Lcp Down - Active"
--#SUMMARY "PPP Lcp Down - Active"
--#SUMMARY "active at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 3 }
adGenPppGroupNcpDownAlarmClr NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupNcpDownAlarm Clear is sent when the NCP state
machine is in the Opened state. An IPCP state machine
instance exists for each defined PPP Group."
--#TYPE "Major - PPP Ncp Down - Cleared"
--#SUMMARY "PPP Ncp Down - Cleared"
--#SUMMARY "cleared at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 4 }
adGenPppGroupNcpDownAlarmAct NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupNcpDownAlarm Active is sent when the NCP state
machine is not in the Opened state. An NCP state machine
instance exists for each defined PPP Group."
--#TYPE "Major - PPP Ncp Down - Active"
--#SUMMARY "PPP Ncp Down - Active"
--#SUMMARY "active at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 5 }
adGenPppGroupIpv6NcpDownAlarmClr NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupIpv6NcpDownAlarm Clear is sent when IPv6
operation is enabled for the PPP Group and the IPv6 NCP (IPv6CP)
state machine is in the Opened state."
--#TYPE "Major - PPP IPv6 Ncp Down - Cleared"
--#SUMMARY "PPP IPv6 Ncp Down - Cleared"
--#SUMMARY "cleared at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 6 }
adGenPppGroupIpv6NcpDownAlarmAct NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupIpv6NcpDownAlarm Active is sent when IPv6
operation is enabled for the PPP Group but the IPv6 NCP (IPv6CP)
state machine is not in the Opened state."
--#TYPE "Major - PPP IPv6 Ncp Down - Active"
--#SUMMARY "PPP IPv6 Ncp Down - Active"
--#SUMMARY "active at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 7 }
adGenPppGroupIpv6AddrMismatchAlarmClr NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupIpv6AddrMismatchAlarm Clear is sent when the
IPv6 address of the peer has been successfully autodetected
and the address now matches the provisioned address of the
peer after previously being declared a mismatch."
--#TYPE "Major - PPP Peer IPv6 Address Mismatch - Cleared"
--#SUMMARY "PPP Peer IPv6 Address Mismatch - Cleared"
--#SUMMARY "cleared at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 8 }
adGenPppGroupIpv6AddrMismatchAlarmAct NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupIpv6AddrMismatchAlarm Active is sent when the
IPv6 address of the peer has been successfully autodetected
and it does not match the provisioned IPv6 address of the peer."
--#TYPE "Major - PPP Peer IPv6 Address Mismatch - Active"
--#SUMMARY "PPP Peer IPv6 Address Mismatch - Active"
--#SUMMARY "active at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 9 }
adGenPppGroupIpv6GatewayAddrMismatchAlarmClr NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupIpv6GatewayAddrMismatchAlarm Clear is sent when
the IPv6 address of the default gateway has been successfully
autodetected and the address now matches the provisioned address
of the default gateway after previously being declared a mismatch.
A clear will also be issued if the gateway assignment mode
(adGenPppGroupGatewayIPv6AddressAssignment) is changed to auto
after previously being declared a mismatch."
--#TYPE "Major - PPP IPv6 Default Gateway Address Mismatch - Cleared"
--#SUMMARY "PPP IPv6 Default Gateway Address Mismatch - Cleared"
--#SUMMARY "cleared at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 10 }
adGenPppGroupIpv6GatewayAddrMismatchAlarmAct NOTIFICATION-TYPE
OBJECTS { adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A adGenPppGroupIpv6GatewayAddrMismatchAlarm Clear is sent when
the IPv6 address of the default gateway has been successfully
autodetected and the address does not match the provisioned address
of the default gateway. This trap is not used if the IPv6 default
gateway assignment mode (adGenPppGroupGatewayIPv6AddressAssignment)
is set to auto."
--#TYPE "Major - PPP IPv6 Default Gateway Address Mismatch - Active"
--#SUMMARY "PPP IPv6 Default Gateway Address Mismatch - Active"
--#SUMMARY "active at shelf: %s, slot: %d, interface %d"
--#ARGUMENTS {1,2,3}
--#SEVERITY "MAJOR"
--#GENERIC 6
--#CATEGORY "Alarm Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adGenPppAlarms 11 }
END