9913 lines
282 KiB
Plaintext
9913 lines
282 KiB
Plaintext
-- Acksys enterprise MIB
|
|
-- This MIB is compatible with SNMP V2c
|
|
-- Clean with VIM command: :g/@[GS]ET/d
|
|
ACKSYS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString, DateAndTime, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
|
|
enterprises, mgmt, IpAddress, Counter32, Gauge32, TimeTicks,
|
|
Integer32, Unsigned32,
|
|
NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
;
|
|
|
|
--Module Identity
|
|
acksys MODULE-IDENTITY
|
|
LAST-UPDATED "202110141505Z"
|
|
ORGANIZATION "ACKSYS Communication & Systems"
|
|
CONTACT-INFO "support@acksys.fr"
|
|
DESCRIPTION "SNMPv2C Module for ACKSYS Solutions"
|
|
-- MUST BE in reverse chronological order, see RFC2578
|
|
-- newest version
|
|
REVISION "202202181505Z" DESCRIPTION "V3.18.0.1"
|
|
REVISION "202107021113Z" DESCRIPTION "V3.16.0.1"
|
|
-- oldest version
|
|
::= { enterprises 28097 }
|
|
|
|
-- textual conventions
|
|
|
|
-- DisplayString is defined in SNMPv2-TC as OCTET STRING SIZE(0..255)
|
|
|
|
PhysAddress ::=
|
|
OCTET STRING(SIZE (6))
|
|
-- This data type is used to model media addresses. For many
|
|
-- types of media, this will be in a binary representation.
|
|
-- For example, an ethernet address would be represented as
|
|
-- a string of 6 octets.
|
|
|
|
WifiFlavor ::= INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4),
|
|
n-g(10),
|
|
n-bg(11),
|
|
n-a(12),
|
|
ac(16)
|
|
}
|
|
NetifName ::= OCTET STRING(SIZE(0..32))
|
|
SecurityModes ::= INTEGER {
|
|
none(1)
|
|
,wep(2)
|
|
,wpa-wpa2-psk(3)
|
|
,wpa-wpa2(4)
|
|
,sae-wpa3-psk(5)
|
|
,wpa3(6)
|
|
,owe(7)
|
|
}
|
|
CellSecurityProtocol ::= INTEGER {
|
|
none(0) -- SIM IMSI only
|
|
,pap(1)
|
|
,chap(2)
|
|
}
|
|
PeapSecurityProtocol ::= INTEGER {
|
|
peap-pap(1)
|
|
,peap-chap(2)
|
|
,peap-mschap(3)
|
|
,peap-mschapv2(4)
|
|
}
|
|
WpaVersions ::= INTEGER { wpa(1), wpa2(2) , wpa-wpa2-mixed(3), wpa3(4), wpa2-wpa3-mixed(5) }
|
|
CipherTypes ::= INTEGER { tkip(1), aes(2) , aestkip(3) }
|
|
WepKeys ::= OCTET STRING (SIZE (0..26))
|
|
-- reasonable signal level values for WiFi
|
|
WifiLevel ::= INTEGER (-100..0)
|
|
DisableEnable ::= INTEGER { disable(1), enable(2) }
|
|
TriState ::= INTEGER { default(0), disable(1), enable(2) }
|
|
-- general enum for asynchronous OID operation
|
|
AsyncSetStatus ::= INTEGER { set-init(0), set-more(1), set-wait(2),
|
|
set-ok(3), set-fail(4) }
|
|
|
|
BridgeId ::= OCTET STRING (SIZE (8))
|
|
PortId ::= OCTET STRING (SIZE (2))
|
|
|
|
-- Acksys specific MIBs.
|
|
network-product OBJECT IDENTIFIER ::= { acksys 1 }
|
|
acksysInternals OBJECT IDENTIFIER ::= { acksys 2 }
|
|
c-key-management OBJECT IDENTIFIER ::= { acksys 4 }
|
|
alarmSettings OBJECT IDENTIFIER ::= { acksys 5 }
|
|
powerStatus OBJECT IDENTIFIER ::= { acksys 6 }
|
|
networkStatus OBJECT IDENTIFIER ::= { acksys 7 }
|
|
networkConfiguration OBJECT IDENTIFIER ::= { acksys 8 }
|
|
serviceStatus OBJECT IDENTIFIER ::= { acksys 9 }
|
|
serviceConfiguration OBJECT IDENTIFIER ::= { acksys 10 }
|
|
|
|
wifiInterface OBJECT IDENTIFIER ::= { network-product 1 }
|
|
administration OBJECT IDENTIFIER ::= { network-product 2 }
|
|
os-stat OBJECT IDENTIFIER ::= { network-product 3 }
|
|
productSpecific OBJECT IDENTIFIER ::= { network-product 4 }
|
|
lanInterface OBJECT IDENTIFIER ::= {network-product 5}
|
|
serialInterface OBJECT IDENTIFIER ::= {network-product 6}
|
|
|
|
settings OBJECT IDENTIFIER ::= { wifiInterface 1 }
|
|
bridge-mode OBJECT IDENTIFIER ::= { wifiInterface 2 }
|
|
access-point-mode OBJECT IDENTIFIER ::= { wifiInterface 3}
|
|
advancedSettings OBJECT IDENTIFIER ::= { wifiInterface 4 }
|
|
|
|
bridgeAPFiltering OBJECT IDENTIFIER ::= { bridge-mode 8}
|
|
|
|
bridgeRoaming OBJECT IDENTIFIER ::= { bridge-mode 9}
|
|
bridgeWirelessScan OBJECT IDENTIFIER ::= { bridge-mode 11}
|
|
bridgeNAT OBJECT IDENTIFIER ::= { bridge-mode 12}
|
|
bridgeNatPortForwarding OBJECT IDENTIFIER ::= { bridgeNAT 11}
|
|
|
|
bridgeRoamingAdvanced OBJECT IDENTIFIER ::={bridgeRoaming 1}
|
|
|
|
|
|
|
|
apClientFiltering OBJECT IDENTIFIER ::= { access-point-mode 4}
|
|
|
|
securitySettings OBJECT IDENTIFIER ::= { settings 9 }
|
|
securityWEP OBJECT IDENTIFIER ::= { securitySettings 2 }
|
|
securityWPA-WPA2 OBJECT IDENTIFIER ::= { securitySettings 3}
|
|
securityPresharedKey OBJECT IDENTIFIER ::= { securityWPA-WPA2 1}
|
|
securityRadius OBJECT IDENTIFIER ::= { securityWPA-WPA2 2} --Obsolete
|
|
securityBackupRadius OBJECT IDENTIFIER ::= { securityWPA-WPA2 3} --Obsolete
|
|
securityRadiusAP OBJECT IDENTIFIER ::= { securityRadius 6}
|
|
securityRadiusBridge OBJECT IDENTIFIER ::= { securityRadius 7}
|
|
securityRadiusAPBackup OBJECT IDENTIFIER ::= { securityRadiusAP 6}
|
|
wds OBJECT IDENTIFIER ::= { access-point-mode 5}
|
|
lanTimeOutSettings OBJECT IDENTIFIER ::= { access-point-mode 8}
|
|
|
|
|
|
longDistanceSettings OBJECT IDENTIFIER ::= { advancedSettings 1}
|
|
|
|
wlg-aboard OBJECT IDENTIFIER ::= { productSpecific 1 }
|
|
|
|
|
|
alarmSettingsPower1Down OBJECT IDENTIFIER ::= { alarmSettings 2 }
|
|
alarmSettingsPower2Down OBJECT IDENTIFIER ::= { alarmSettings 3 }
|
|
alarmSettingsLan1Down OBJECT IDENTIFIER ::= { alarmSettings 4 }
|
|
alarmSettingsLan2Down OBJECT IDENTIFIER ::= { alarmSettings 5 }
|
|
alarmSettingsLan3Down OBJECT IDENTIFIER ::= { alarmSettings 6 }
|
|
alarmSettingsLan4Down OBJECT IDENTIFIER ::= { alarmSettings 7 }
|
|
alarmSettingsLan5Down OBJECT IDENTIFIER ::= { alarmSettings 8 }
|
|
alarmSettingsLan6Down OBJECT IDENTIFIER ::= { alarmSettings 9 }
|
|
alarmSettingsLan7Down OBJECT IDENTIFIER ::= { alarmSettings 10 }
|
|
alarmSettingsLan8Down OBJECT IDENTIFIER ::= { alarmSettings 11 }
|
|
alarmSettingsWLANDown OBJECT IDENTIFIER ::= { alarmSettings 12 }
|
|
|
|
serialFormat OBJECT IDENTIFIER ::= { serialInterface 2 }
|
|
serialSendTriggers OBJECT IDENTIFIER ::= { serialInterface 3 }
|
|
serialServiceVirtualCom OBJECT IDENTIFIER ::= { serialInterface 4 }
|
|
serialServiceModbusSlave OBJECT IDENTIFIER ::= { serialInterface 5 }
|
|
serialServiceModbusMaster OBJECT IDENTIFIER ::= { serialInterface 6 }
|
|
serialServiceTcpRawPortServer OBJECT IDENTIFIER ::= { serialInterface 7 }
|
|
serialServiceTcpRawPortClient OBJECT IDENTIFIER ::= { serialInterface 8 }
|
|
serialServiceUdpRawPortServer OBJECT IDENTIFIER ::= { serialInterface 9 }
|
|
|
|
serialSendTriggerCharcount OBJECT IDENTIFIER ::= { serialSendTriggers 1 }
|
|
serialSendTriggerIdleDelay OBJECT IDENTIFIER ::= { serialSendTriggers 2 }
|
|
serialSendTriggerFrameDelay OBJECT IDENTIFIER ::= { serialSendTriggers 3 }
|
|
|
|
modbusMasterForwardingTable OBJECT IDENTIFIER ::= { serialServiceModbusMaster 3}
|
|
modbusMasterForwardingTable-Rule1 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 1}
|
|
modbusMasterForwardingTable-Rule2 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 2}
|
|
modbusMasterForwardingTable-Rule3 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 3}
|
|
modbusMasterForwardingTable-Rule4 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 4}
|
|
modbusMasterForwardingTable-Rule5 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 5}
|
|
modbusMasterForwardingTable-Rule6 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 6}
|
|
modbusMasterForwardingTable-Rule7 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 7}
|
|
modbusMasterForwardingTable-Rule8 OBJECT IDENTIFIER ::= { modbusMasterForwardingTable 8}
|
|
|
|
tcpRawServerSerialExtraConfig OBJECT IDENTIFIER ::= { serialServiceTcpRawPortServer 1 }
|
|
|
|
udpRawServerSerialExtraConfig OBJECT IDENTIFIER ::= { serialServiceUdpRawPortServer 1 }
|
|
|
|
tcpRawClientSerialExtraConfig OBJECT IDENTIFIER ::= { serialServiceTcpRawPortClient 1 }
|
|
tcpRawClientRemoteServers OBJECT IDENTIFIER ::= { serialServiceTcpRawPortClient 7 }
|
|
tcpRawClientServer1 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 1 }
|
|
tcpRawClientServer2 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 2 }
|
|
tcpRawClientServer3 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 3 }
|
|
tcpRawClientServer4 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 4 }
|
|
tcpRawClientServer5 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 5 }
|
|
tcpRawClientServer6 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 6 }
|
|
tcpRawClientServer7 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 7 }
|
|
tcpRawClientServer8 OBJECT IDENTIFIER ::= { tcpRawClientRemoteServers 8 }
|
|
|
|
|
|
--acksys group
|
|
acksysProductID OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wlg-link(1),
|
|
wlg-aboard-n(2),
|
|
wlg-link-v2(3),
|
|
wlg-aboard-n-v2(4),
|
|
wlg-switch(5),
|
|
wlg-dongle-oem(6),
|
|
wlg-dongle(7),
|
|
msw-aboard(8),
|
|
wlg-xroad-n(9),
|
|
wlg-xroad-s(10),
|
|
wlg-ida-n(11),
|
|
wlg-ida-s(12),
|
|
wlg-xroad-np(13),
|
|
wlg-ida-np(14),
|
|
m340-wc(18),
|
|
wlg-aboard-npi-v3(19),
|
|
wln-aboard(22),
|
|
wln-aboard-n(23),
|
|
wln-aboard-24(24),
|
|
wln-aboard-48(25),
|
|
wln-aboard-72(26),
|
|
wln-aboard-110(27),
|
|
wln-link-oem-rj(28),
|
|
wln-link-oem-ttl(29),
|
|
wln-xroad(30),
|
|
wln-xroad-v2(31),
|
|
wlg-link-v3(32),
|
|
wlg-4lan(33),
|
|
wln-railbox-1(35),
|
|
wln-railbox-1p(36),
|
|
wln-railbox-2(37),
|
|
wln-railbox-2p(38),
|
|
wln-link-oem-ttl-v2(45)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the product Id code.
|
|
The m340-wc is also kown as pmxnow0300.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
"
|
|
::= { acksys 3 }
|
|
|
|
internalUniqueID OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns a unique product ID for NDM
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 1 }
|
|
|
|
internalSerial OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the motherboard serial number
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 2 }
|
|
|
|
internalWlanChange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last wlan table change pseudotime
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 3 }
|
|
|
|
internalRadioChange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last radio table change pseudotime
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 4 }
|
|
|
|
internalSerialTest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start the serial test
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 5 }
|
|
|
|
internalSerialTestResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read the serial test result
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 6 }
|
|
|
|
internalAlarmSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set ou unset the alarm switch
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { acksysInternals 7 }
|
|
|
|
internalDigitalInput OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read the digital input
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksysInternals 8 }
|
|
|
|
--network-product
|
|
|
|
--Wireless Interface group
|
|
settingInterfaceSsid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSID (wireless network name)
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 1 }
|
|
|
|
settingInterfaceWifiMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bridge(1),
|
|
access-point(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select between MAX-ACCESS POINT and BRIDGE
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 2 }
|
|
|
|
settingInterfaceChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wireless network uses specific channels to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network.(used in MAX-ACCESS POINT & AD-HOC BRIDGE modes)
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 3 }
|
|
|
|
settingInterface80211Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4),
|
|
n-g(10),
|
|
n-bg(11),
|
|
n-a(12)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select IEEE 802.11x compatibility mode.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 4 }
|
|
|
|
settingInterfaceSuper-a-g-Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
super-g-without-turbo(2),
|
|
super-g-with-static-turbo(3),
|
|
super-g-with-dynamic-turbo(4)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter enables the SUPER A/G mode to reach the 108 Mbits/s speed.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 5 }
|
|
|
|
settingEnableRadio OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / Disable wifi radio
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 6 }
|
|
|
|
settingTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high(1),
|
|
medium(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set WIFI tx power
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 7 }
|
|
|
|
settingRegion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
israel(2),
|
|
usa(4),
|
|
hong-kong(5),
|
|
canada(6),
|
|
australia(7),
|
|
franceoutdoor(10),
|
|
europe(14),
|
|
japan(17),
|
|
singapore(18),
|
|
korea(20),
|
|
mexico(21),
|
|
indonesia(22),
|
|
china(23),
|
|
russia(27),
|
|
brazil(28),
|
|
chile(29),
|
|
thailand(30),
|
|
peru(31)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set WIFI regulation domain
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 8 }
|
|
|
|
settingAntennaChoice OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
diversity(1),
|
|
main(2),
|
|
aux(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the antenna type
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 10 }
|
|
|
|
--Setting Transmission rate
|
|
settingTransmisionRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the transmission rate in Mbps
|
|
Automatic : -1
|
|
With SuperAG Mode : 108,96,72,48,36,24,18,12
|
|
Without SuperAG mode : 54,48,36,24,18,12,9,6
|
|
802.11b mode : 11,5.5,2,1
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 11 }
|
|
|
|
--Setting flag udap sans password
|
|
settingFlagUdapnopassword OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure LAN settings without password
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 12 }
|
|
--Setting filter in subnet
|
|
settingFlagFiltersamenet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
different-subnet-filtre(2),
|
|
custom-subnet-filtre(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Isolate subnet filter
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 13 }
|
|
--Setting economy filter
|
|
settingFlagFilterframecosom OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting economy filter
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 14 }
|
|
|
|
--Setting DFS support
|
|
settingDFSsupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting DFS support
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 15 }
|
|
settingFilterCustomIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the custom subnet
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 16 }
|
|
settingFilterCustomSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask of the custom subnet
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { settings 17 }
|
|
-- Advanced setting group
|
|
enable802-11d OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enable / disable the 802.11d.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { advancedSettings 2 }
|
|
|
|
enableIsolateSTA OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enable / disable the isolating access point.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { advancedSettings 3 }
|
|
|
|
-- long distance settings groups
|
|
enableLongDistance OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enable / disable distance parameter.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { longDistanceSettings 1 }
|
|
|
|
distanceAntennaMeter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Set the distance between antenna in meter.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { longDistanceSettings 2 }
|
|
|
|
distanceSlotTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { longDistanceSettings 3 }
|
|
|
|
distanceAckTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { longDistanceSettings 4 }
|
|
|
|
distanceCtsTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { longDistanceSettings 5 }
|
|
|
|
--Setting security group
|
|
securityMode OBJECT-TYPE
|
|
SYNTAX SecurityModes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the security mode
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securitySettings 1 }
|
|
|
|
--WEP group
|
|
securityModeWepKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the WEP key len (64 bits or 128 bits)
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 1 }
|
|
|
|
securityModeWepKey-1 OBJECT-TYPE
|
|
SYNTAX WepKeys
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 1 in hexadecimal format
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 2 }
|
|
|
|
securityModeWepKey-2 OBJECT-TYPE
|
|
SYNTAX WepKeys
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 2 in hexadecimal format
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 3 }
|
|
|
|
securityModeWepKey-3 OBJECT-TYPE
|
|
SYNTAX WepKeys
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 3 in hexadecimal format
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 4 }
|
|
|
|
securityModeWepKey-4 OBJECT-TYPE
|
|
SYNTAX WepKeys
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 4 in hexadecimal format
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 5 }
|
|
|
|
securityModeDefaultWepKey OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the wep key used
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 6 }
|
|
|
|
securityModeWepAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open(1),
|
|
shared(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set WEP Authentication
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWEP 7 }
|
|
|
|
--WPA/WPA2-PSK group
|
|
|
|
securityModeWpaMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wpa(1),
|
|
wpa2(2),
|
|
wpa3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the wpa mode
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWPA-WPA2 4 }
|
|
|
|
securityModeWpaCipherType OBJECT-TYPE
|
|
SYNTAX CipherTypes
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"select the cipher type
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWPA-WPA2 5 }
|
|
|
|
securityModeWpaKeyUpdateInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityWPA-WPA2 6 }
|
|
|
|
--Pre-shared key group
|
|
securityModeWpaPresharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityPresharedKey 1 }
|
|
|
|
-- radius AP
|
|
securityModeWPARadiusAPAuthenticationTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAP 1 }
|
|
|
|
securityModeWPARadiusAPIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAP 2 }
|
|
|
|
securityModeWPARadiusAPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAP 3 }
|
|
|
|
securityModeWPARadiusAPSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAP 4 }
|
|
|
|
securityModeWPARadiusAPMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAP 5 }
|
|
--Obsolete OIDs
|
|
securityModeWPARadiusAuthenticationTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadius 1 }
|
|
|
|
securityModeWPARadiusIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadius 2 }
|
|
|
|
securityModeWPARadiusPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadius 3 }
|
|
|
|
securityModeWPARadiusSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadius 4 }
|
|
|
|
securityModeWPARadiusMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadius 5 }
|
|
--End of Obsolete OIDs
|
|
|
|
-- backup radius
|
|
securityModeWPABackupRadiusAPIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAPBackup 1 }
|
|
|
|
securityModeWPARadiusBackupAPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAPBackup 2 }
|
|
|
|
securityModeWPARadiusBackupAPSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAPBackup 3 }
|
|
|
|
securityModeWPABackupRadiusAPMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusAPBackup 4 }
|
|
|
|
--Obsolete OIDs
|
|
securityModeWPABackupRadiusIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityBackupRadius 1 }
|
|
|
|
securityModeWPARadiusBackupPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityBackupRadius 2 }
|
|
|
|
securityModeWPARadiusBackupSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityBackupRadius 3 }
|
|
|
|
securityModeWPABackupRadiusMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityBackupRadius 4 }
|
|
--End of Obsolete OIDs
|
|
|
|
-- radius Bridge
|
|
securityModeWPARadiusLogin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusBridge 1 }
|
|
|
|
securityModeWPARadiusPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { securityRadiusBridge 2 }
|
|
|
|
|
|
--Access point group
|
|
apClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ApClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information about connected clients.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { access-point-mode 1 }
|
|
|
|
apAutomaticChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / disable the automatic channel select
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { access-point-mode 2}
|
|
|
|
apClientCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"count the number of entries in ApClientEntry
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { access-point-mode 3}
|
|
|
|
apClientEntry OBJECT-TYPE
|
|
SYNTAX ApClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information about the connected client.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
INDEX { clientMacAddr }
|
|
::= { apClientTable 1 }
|
|
|
|
ApClientEntry ::=
|
|
SEQUENCE {
|
|
clientMacAddr
|
|
PhysAddress,
|
|
client80211Mode
|
|
INTEGER,
|
|
clientTxRate
|
|
INTEGER ,
|
|
clientRssiPercent
|
|
Gauge32
|
|
}
|
|
|
|
clientMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the client connected to the AP.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientEntry 1 }
|
|
|
|
client80211Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show client's IEEE 802.11x compatibility mode.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientEntry 2 }
|
|
|
|
clientTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Client's communication speed in bits per second
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientEntry 3 }
|
|
|
|
clientRssiPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Client's RSSI (percent)
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientEntry 4}
|
|
|
|
settingSSIDVisibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
visible(2),
|
|
invisible(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable SSID Visibility
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { access-point-mode 6}
|
|
|
|
enableSTP OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / disable STP protocol.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { access-point-mode 7 }
|
|
|
|
enableLanTimeout OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable LAN timeout.
|
|
ACCESS POINT can be configured to auto-disconnect the radio when the LAN is disconnected from the equipment.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanTimeOutSettings 1 }
|
|
|
|
lanTimeoutIPSurvey OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the IP address where the probe was be sent.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanTimeOutSettings 2 }
|
|
|
|
lanTimeoutMaxProbe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the number of probe without response necessairy to disconnect the radio.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanTimeOutSettings 3 }
|
|
|
|
lanTimeoutProbeTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the probe response waiting time in seconds.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanTimeOutSettings 4 }
|
|
|
|
lanTimeoutProbeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the times in seconds between each probes.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanTimeOutSettings 5 }
|
|
|
|
|
|
--======================
|
|
--AP Filtering
|
|
|
|
apClientFilteringEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / Disable Client Filtering.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 1 }
|
|
|
|
apClientFilteringMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select Client Filtering Mode (allow/Deny)
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 2 }
|
|
|
|
apClientWirelessFiltering OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Wireless client filtering
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 3 }
|
|
|
|
apClientWiredFiltering OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Wireless client filtering
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 4 }
|
|
|
|
apClientFilteringMACAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAC address field
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 5 }
|
|
|
|
apClientFilteringName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name Field
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 6}
|
|
|
|
apClientFilteringSave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "write 1 to save the rule
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 7 }
|
|
|
|
apClientFilteringDelete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, delete the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 8 }
|
|
|
|
apClientFilteringEnableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, enable the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 9 }
|
|
|
|
apClientFilteringDisableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, disable the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 10 }
|
|
|
|
apClientFilteringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ApClientFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information AP bridge filtering rules list.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { apClientFiltering 11 }
|
|
|
|
|
|
apClientFilteringEntry OBJECT-TYPE
|
|
SYNTAX ApClientFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information of the rule.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
INDEX { apClientFilteringListId }
|
|
::= { apClientFilteringTable 1 }
|
|
|
|
ApClientFilteringEntry ::=
|
|
SEQUENCE {
|
|
apClientFilteringListId
|
|
INTEGER,
|
|
apClientFilteringListName
|
|
OCTET STRING,
|
|
apClientFilteringListMAC
|
|
PhysAddress,
|
|
apClientFilteringListEnable
|
|
INTEGER
|
|
}
|
|
|
|
apClientFilteringListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rule index.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientFilteringEntry 1 }
|
|
|
|
apClientFilteringListMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the client.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientFilteringEntry 3 }
|
|
|
|
apClientFilteringListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show rule's name
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientFilteringEntry 2 }
|
|
|
|
apClientFilteringListEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show if the rule is enabled or not.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { apClientFilteringEntry 4 }
|
|
|
|
|
|
|
|
--End AP Filtering
|
|
--======================
|
|
|
|
--======================
|
|
--WDS
|
|
apWDSEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable WDS.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 1 }
|
|
|
|
apWDSEnableSTP OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable STP when WDS is on
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { wds 2 }
|
|
|
|
apWDSMAC1 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
First AP mac address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 3 }
|
|
|
|
apWDSMAC2 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Second AP mac address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 4 }
|
|
|
|
apWDSMAC3 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Third AP mac address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 5 }
|
|
|
|
apWDSMAC4 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Fourth AP mac address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 6 }
|
|
|
|
apWDSMAC5 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Fifth AP mac address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 7 }
|
|
|
|
apWDSMAC6 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Sixth AP mac address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wds 8 }
|
|
|
|
--bridge group
|
|
bridge-modeLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAX-ACCESS POINT's connection status.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 1 }
|
|
|
|
bridge-modeMacAP OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAX-ACCESS POINT's MAC ADDRESS we are connected with.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 2 }
|
|
|
|
bridge-modeRSSI OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAX-ACCESS POINT's connection RSSI.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 3 }
|
|
|
|
bridge-modeRSSIdBm OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Connection's RSSI in dBm.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 4 }
|
|
|
|
bridge-modeRSSIPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Connection's RSSI in percent.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 5}
|
|
|
|
bridge-modeCurrentTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Current communication speed in bits per second.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 6}
|
|
|
|
bridge-WirelessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
infrastructure(1),
|
|
ad-hoc(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the Wireless mode. Infrastructure mode require an access point.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 7}
|
|
|
|
--*********************
|
|
|
|
--********************
|
|
-- bridge
|
|
|
|
bridgeAPFilteringEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable AP Filtering.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 1 }
|
|
|
|
bridgeAPFilteringMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select AP Filtering Mode (allow/Deny)
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 2 }
|
|
|
|
bridgeAPFilteringMACAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAC address field
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 3 }
|
|
|
|
bridgeAPFilteringName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name Field
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 4 }
|
|
|
|
bridgeAPFilteringSave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "write 1 to save the rule
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 5 }
|
|
|
|
bridgeAPFilteringDelete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, delete the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 6 }
|
|
|
|
bridgeAPFilteringEnableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, enable the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 7 }
|
|
|
|
bridgeAPFilteringDisableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, disable the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeAPFiltering 8 }
|
|
|
|
|
|
bridgeAPFilteringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeAPFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information bridge AP filtering rules list.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeAPFiltering 9 }
|
|
|
|
bridgeAPFilteringEntry OBJECT-TYPE
|
|
SYNTAX BridgeAPFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information of the rule.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
INDEX { bridgeAPFilteringListId }
|
|
::= { bridgeAPFilteringTable 1 }
|
|
|
|
BridgeAPFilteringEntry ::=
|
|
SEQUENCE {
|
|
bridgeAPFilteringListId
|
|
INTEGER,
|
|
bridgeAPFilteringListName
|
|
OCTET STRING,
|
|
bridgeAPFilteringListMAC
|
|
PhysAddress,
|
|
bridgeAPFilteringListEnable
|
|
INTEGER
|
|
}
|
|
|
|
bridgeAPFilteringListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rule index.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeAPFilteringEntry 1 }
|
|
|
|
bridgeAPFilteringListMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the client.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeAPFilteringEntry 3 }
|
|
|
|
bridgeAPFilteringListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show rule's name
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeAPFilteringEntry 2 }
|
|
|
|
bridgeAPFilteringListEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Show if a rule is enabled or not.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeAPFilteringEntry 4 }
|
|
|
|
bridgeChannelList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A wireless network uses specific channels in the 2.4GHz or
|
|
5GHz wireless spectrum to handle communication between clients.
|
|
Some channels in your area may have interference from other electronic
|
|
devices. Your wireless bridge will use the channel that is used by the
|
|
access point it will associate with. But you can select here your
|
|
channel preference to help optimize the performance and coverage of
|
|
your wireless network. If you used the roaming, Acksys recommend to
|
|
used only one channel for better bandwith.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridge-mode 10 }
|
|
|
|
--roaming setting
|
|
bridgeRoamingEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Roaming enables WiFi clients to roam among AP when WiFi RSSI
|
|
of the current AP becomes weak. This radio button enables/disables the
|
|
roaming capabilities of the bridge.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::={bridgeRoaming 2}
|
|
|
|
bridgeRoamingRSSIThreshold-dBm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allows to configure the RSSI roaming threshold in dBm from
|
|
which the roaming algorithm (to find a better AP) will start. AP
|
|
changing will only be effective if the current RSSI is lower than that
|
|
threshold, and if a new AP with a better RSSI has been detected.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoaming 3}
|
|
|
|
bridgeRoamingRSSIThreshold-percent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Allows to configure the RSSI roaming threshold in percent from
|
|
which the roaming algorithm (to find a better AP) will start. AP changing
|
|
will only be effective if the current RSSI is lower than that threshold,
|
|
and if a new AP with a better RSSI has been detected.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoaming 4}
|
|
|
|
bridgeRoamingAdvancedScanThreshold-dbm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allows to configure the RSSI scan threshold in dBm from
|
|
which the access point active scan will start. The access point active
|
|
scan process looking on each valid channel the access point where it
|
|
will be possible to roam.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoamingAdvanced 1}
|
|
|
|
bridgeRoamingAdvancedScanThreshold-percent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allows to configure the RSSI scan threshold in percent from
|
|
which the access point active scan will start. The access point active
|
|
scan process looking on each valid channel the access point where it
|
|
will be possible to roam.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoamingAdvanced 2}
|
|
|
|
bridgeRoamingAdvancedScanPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow to configure the time between two scan.
|
|
Reduce this time increase the Access Point discover, but decrease the
|
|
bandwith if you used more one channel.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoamingAdvanced 3}
|
|
|
|
bridgeRoamingAdvancedScanDuration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow to configure the duration while the bridge waiting the Access Point answer.
|
|
Reduce this duration increase the Bandwith when you used more one channel, but decrase the Access Point discover.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoamingAdvanced 4}
|
|
|
|
bridgeRoamingAdvancedAPLossDetection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If nothing is received from the AP during a certain amount of time, it will be considered unreachable.
|
|
This amount of time is computed as:
|
|
'AP timeout' = 'AP loss detection' x 'beacon interval'.
|
|
The recommended value for 'AP loss detection' is 5.
|
|
The recommended value for 'Beacon interval' (which should be configured in your AP) is 50 ms.
|
|
If the AP timeout is set too low, it may decrease the bandwidth and roaming performance.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= {bridgeRoamingAdvanced 5}
|
|
|
|
-- End bridge filter
|
|
--***********************
|
|
|
|
--Bridge status scan
|
|
bridgeWileressScanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeWirelessScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode.
|
|
This table shows information AP bridge filtering rules list.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScan 1 }
|
|
|
|
|
|
bridgeWirelessScanEntry OBJECT-TYPE
|
|
SYNTAX BridgeWirelessScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Shows information of the rule.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
INDEX { bridgeWirelessScanAPMac }
|
|
::= { bridgeWileressScanTable 1 }
|
|
|
|
BridgeWirelessScanEntry ::=
|
|
SEQUENCE {
|
|
bridgeWirelessScanAPMac
|
|
PhysAddress,
|
|
bridgeWirelessScanSSID
|
|
OCTET STRING,
|
|
bridgeWirelessScanChannel
|
|
INTEGER,
|
|
bridgeWirelessScanMode
|
|
INTEGER,
|
|
bridgeWirelessScanSecurity
|
|
INTEGER,
|
|
bridgeWirelessScanRssi
|
|
INTEGER
|
|
}
|
|
|
|
bridgeWirelessScanAPMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC address of the access point.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScanEntry 1 }
|
|
|
|
bridgeWirelessScanSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..33))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScanEntry 2 }
|
|
|
|
bridgeWirelessScanChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScanEntry 3 }
|
|
|
|
|
|
bridgeWirelessScanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show AP's IEEE 802.11x compatibility mode.
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScanEntry 4 }
|
|
|
|
bridgeWirelessScanSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
wep(1),
|
|
wpa(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScanEntry 5 }
|
|
|
|
bridgeWirelessScanRssi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeWirelessScanEntry 6 }
|
|
|
|
|
|
|
|
--end bridge status scan
|
|
|
|
--BrigeNAT
|
|
brigeNATStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / disable NAT
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 1 }
|
|
|
|
brigeNATEnablePing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / disable ping response from WAN
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 2 }
|
|
|
|
brigeNATEnableProductWebServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / disable the internal web server from WAN
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 3 }
|
|
|
|
brigeNATInternalWebServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP port used by internal web server from WAN
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 4 }
|
|
|
|
brigeNATEnableProductSnmpServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / disable the internal snmp server from WAN
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 5 }
|
|
|
|
brigeNATInternalWebSnmpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP port used by internal snmp server from WAN
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 6 }
|
|
|
|
|
|
brigeNATWanIpAddrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {static(1),dhcp(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ip address mode on wan side
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 7 }
|
|
|
|
brigeNATWanIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Static Ip address on wan side
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 8 }
|
|
|
|
brigeNATWanSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Subnet mask on wan side
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 9 }
|
|
|
|
brigeNATWanGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gateway ip address on wan side
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNAT 10 }
|
|
|
|
bridgeNatPortForwardingName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Show rule's name
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 2 }
|
|
|
|
bridgeNatPortForwardingIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Show ipaddress to forward data
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 3 }
|
|
|
|
bridgeNatPortForwardingPublicTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Show public TCP port
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 4 }
|
|
|
|
bridgeNatPortForwardingPrivateTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Show private TCP port
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 5 }
|
|
|
|
bridgeNatPortForwardingPublicUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Show public TCP port
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 6 }
|
|
|
|
bridgeNatPortForwardingPrivateUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Show private TCP port
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 7 }
|
|
|
|
bridgeNatPortForwardingEnableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, enable the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 8 }
|
|
|
|
bridgeNatPortForwardingDisableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, disable the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 9 }
|
|
|
|
bridgeNatPortForwardingSaveRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, save the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 10 }
|
|
|
|
bridgeNatPortForwardingDeleteRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, delete the rule which is indexed by the written value
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { bridgeNatPortForwarding 11 }
|
|
|
|
bridgeNatPortForwardingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeNatPortForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table show information on port forwading rules
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwarding 1 }
|
|
|
|
bridgeNatPortForwardingEntry OBJECT-TYPE
|
|
SYNTAX BridgeNatPortForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Shows information of rule.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
INDEX { bridgeNatPortForwardingListId }
|
|
::= {bridgeNatPortForwardingTable 1}
|
|
|
|
BridgeNatPortForwardingEntry ::=
|
|
SEQUENCE {
|
|
bridgeNatPortForwardingListId
|
|
INTEGER,
|
|
bridgeNatPortForwardingListEnable
|
|
INTEGER,
|
|
bridgeNatPortForwardingListName
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListIpAddr
|
|
IpAddress,
|
|
bridgeNatPortForwardingListPublicTcpPort
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListPrivateTcpPort
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListPublicUdpPort
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListPrivateUdpPort
|
|
OCTET STRING
|
|
}
|
|
|
|
bridgeNatPortForwardingListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rule index
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 1 }
|
|
|
|
bridgeNatPortForwardingListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show rule's name
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 2 }
|
|
|
|
bridgeNatPortForwardingListIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show ipaddress to forward data
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 3 }
|
|
|
|
bridgeNatPortForwardingListPublicTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show public TCP port
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 4 }
|
|
|
|
bridgeNatPortForwardingListPrivateTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show private TCP port
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 5 }
|
|
|
|
bridgeNatPortForwardingListPublicUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show public TCP port
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 6 }
|
|
|
|
bridgeNatPortForwardingListPrivateUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show private TCP port
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 7 }
|
|
|
|
bridgeNatPortForwardingListEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rule state
|
|
[FW:E2080.AC.1:5.52.0]"
|
|
::= { bridgeNatPortForwardingEntry 8 }
|
|
|
|
--end bridgeNAT
|
|
--*********************
|
|
|
|
-- Administration group
|
|
|
|
adminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {reset(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Writing 1 resets the product. This must be done after each configuration change.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { administration 1}
|
|
|
|
adminResetFactory OBJECT-TYPE
|
|
SYNTAX INTEGER {resetfactory(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Writing 1 resets the product to the factory settings.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { administration 2}
|
|
|
|
adminEnableWebServer OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or Disable internal webserver.
|
|
Not supported on the WLn- products series.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { administration 3}
|
|
|
|
adminAutoSave OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or Disable the automatic saving of changes. When this function is disabled, modifications are not saved automatically after change and some OID are applied immediately.
|
|
Not supported on the WLn- products series.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { administration 4}
|
|
|
|
adminSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
saveNotRequired(3),
|
|
saveRequired(2),
|
|
save(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Write 1 to save the modification in flash. Read this OID to know if a save is require.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { administration 5}
|
|
|
|
adminApply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2),
|
|
applyRequire(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
When set to 'Enable', applies configuration
|
|
changes without rebooting the product. The value
|
|
returns to 'Disable' after execution.
|
|
The value return 'apply_require' if the configuration
|
|
was modified but not applied.
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
[SYNFW:3:E2148.AC.1:4.10.0.1]
|
|
"
|
|
::= { administration 6}
|
|
|
|
adminConfigHash OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Hash value of configuration file
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { administration 7}
|
|
|
|
fileTransfer OBJECT IDENTIFIER ::= { administration 8 }
|
|
|
|
adminIdentify OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Flash the product diagnostic LED.
|
|
Return 0 after get.
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { administration 9}
|
|
|
|
adminEvents OBJECT IDENTIFIER ::= { administration 10 }
|
|
|
|
adminTimeZone OBJECT IDENTIFIER ::= { administration 11 }
|
|
|
|
adminSystemDateAndTime OBJECT IDENTIFIER ::= { administration 12 }
|
|
|
|
-- fileTransfer group
|
|
|
|
fileTransferAction OBJECT-TYPE
|
|
SYNTAX INTEGER {upload(1), download(2)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "file {upload to/download from} product
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 1}
|
|
|
|
fileTransferType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1),
|
|
firmware(2),
|
|
lte-firmware(3),
|
|
wids-config(4),
|
|
ssh-auth-keys(5)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Type of file to transfer: 1.configuration back up;
|
|
2.firmware file; 3.LTE radio firmware; 4.WIDS configuration
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 2}
|
|
|
|
fileTransferSize OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Maximum size of file chunks to transfer
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 3}
|
|
|
|
fileTransferIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Index of chunk to transfer
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 4}
|
|
|
|
fileTransferHash OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Hash value of file to transfer
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 5}
|
|
|
|
fileTransferChunk OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "File chunk to transfer; includes
|
|
Size bytes at file offset Index*Size
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 6}
|
|
|
|
fileTransferResult OBJECT-TYPE
|
|
SYNTAX INTEGER {available(1), in-progress(2), nok(3)}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Transfer result
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 7}
|
|
|
|
fileTransferSession OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Transfer session
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { fileTransfer 8}
|
|
|
|
-- Event Handler interactions group
|
|
|
|
adminEventDisable OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Disable (i.e. reset) action for the named alarm
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { adminEvents 1}
|
|
|
|
adminEventEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable (i.e. set) action for the named alarm
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { adminEvents 2}
|
|
|
|
adminEventTrigger OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Execute action for the named one-shot alarm
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { adminEvents 3}
|
|
|
|
-- Admin Time Zone
|
|
|
|
adminTimeZoneDBVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the iana Time Zone Database version
|
|
Please see: https://www.iana.org/time-zones
|
|
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { adminTimeZone 1 }
|
|
|
|
adminTimeZoneName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Set Time Zone name as defined in the iana Time Zone Database
|
|
Please see: https://www.iana.org/time-zones
|
|
|
|
example:
|
|
(This an extract from the database, but it may not be up-to-date)
|
|
|
|
America/New York
|
|
Europe/Paris
|
|
|
|
[FW:E2148.AC.1:4.16.0.1]
|
|
"
|
|
::= { adminTimeZone 2}
|
|
|
|
-- Admin Sytem date and Time
|
|
|
|
adminSystemDateAndTimeLocal OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The system current date and time expressed relative to the
|
|
configured Time Zone.
|
|
For Write operation, only 8 OCTETs can be set, as the 3 remaining
|
|
octets reserved for the direction from UTC, are automatically
|
|
deduced from the Configured Time Zone.
|
|
For Read operation, 11 OCTETs will be returned.
|
|
|
|
For this configuration, you don't need to make Save and Apply
|
|
|
|
[FW:E2148.AC.1:4.16.0.1]
|
|
"
|
|
::= { adminSystemDateAndTime 1}
|
|
|
|
adminSystemDateAndTimeUTC OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The system current date and time expressed in UTC.
|
|
For Write operation, only 8 OCTETs can be set, as the 3 remaining
|
|
octets reserved for the direction from UTC, are meaningless.
|
|
For Read operation, only 8 OCTETs will be returned, as the 3
|
|
octets reserved for the direction from UTC, are meaningless.
|
|
|
|
For this configuration, you don't need to make Save and Apply
|
|
|
|
[FW:E2148.AC.1:4.16.0.1]
|
|
"
|
|
::= { adminSystemDateAndTime 2}
|
|
|
|
-- os-stat group
|
|
os-statFreeHeap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The amount of memory currently available, measured in bytes.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { os-stat 1 }
|
|
|
|
os-statTotalHeap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total size of the heap, measured in bytes.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { os-stat 2 }
|
|
|
|
os-statHeapLowWater OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Low water mark for the heap. Writing any value this variable will always
|
|
reset the low water to the total heap size.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { os-stat 3 }
|
|
|
|
os-statNetpageFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The amount of netpages currently available, measured in bytes.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { os-stat 4 }
|
|
|
|
os-statNetpageLowWater OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Low water mark for the netpage.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { os-stat 5 }
|
|
|
|
|
|
-- wlg-aboard group
|
|
wlg-aboard-PW1-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"
|
|
Power 1 state
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wlg-aboard 1 }
|
|
|
|
wlg-aboard-PW2-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"
|
|
Power 2 state
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { wlg-aboard 2 }
|
|
|
|
-- lanInterface group
|
|
lanInterfaceIpAddrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {static(1),dhcp(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static or DHCP Ip settings
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
|
|
::= { lanInterface 1 }
|
|
|
|
lanInterfaceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Product IP address
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanInterface 2 }
|
|
|
|
lanInterfaceSubNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network mask
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanInterface 3 }
|
|
|
|
lanInterfaceGatewayIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP gateway
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanInterface 4 }
|
|
|
|
lanInterfaceHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Host name
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanInterface 5 }
|
|
|
|
lanInterfaceLocalDomainName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local Domain Name
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { lanInterface 6 }
|
|
|
|
-- c-key-management
|
|
ckeyManagementCopySettingTo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 1 to copy the current settings to the C-KEY. After this action, all previous data in the C-KEY are lost.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 1 }
|
|
|
|
ckeyManagementCopySettingFrom OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 1 to copy the product settings from the C-KEY. On WLn series, this will reboot the product.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 2 }
|
|
|
|
ckeyManagementErase OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 1 to erase the C-KEY.
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 3 }
|
|
|
|
ckeyManagementStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ckeyStatusNotDetected(1),
|
|
ckeyStatusNotValid(2),
|
|
ckeyStatusValidAndApplied(3),
|
|
ckeyStatusValidAndBackup(4),
|
|
ckeyStatusValidAndIgnored(5),
|
|
ckeyStatusContainsWlg(6),
|
|
ckeyStatusTooSmall(7),
|
|
ckeyStatusWrongProduct(8),
|
|
ckeyStatusIgnored(9),
|
|
ckeyStatusBusy(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read the C-Key status
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 4 }
|
|
|
|
ckeyManagementIgnoreSetting OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 2(enable) to disallow configuration loading from C-Key at startup.
|
|
Write 1(disable) to allow configuration loading from C-Key at startup.
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 5 }
|
|
|
|
ckeyManagementDisableLed OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 2(enable) to make the C-Key status red LED stayed off.
|
|
Write 1(disable) to use the C-Key status red LED as usal.
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 6 }
|
|
|
|
|
|
ckeyManagementTest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 1 to start the C-Key auto-test.
|
|
Warning, this test will erase the whole C-Key.
|
|
This OID is reserved for ACKSYS production.
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 7 }
|
|
|
|
ckeyManagementTestResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ckeyTestInternalError(1),
|
|
ckeyTestNotAvailAble(2),
|
|
ckeyTestInProgress(3),
|
|
ckeyTestNotOk(4),
|
|
ckeyTestOk(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read the C-Key test results
|
|
This OID is reserved for ACKSYS production.
|
|
[FW:E2148.AC.1:2.8.0.1]
|
|
|
|
"
|
|
::= { c-key-management 8 }
|
|
|
|
-- alarmSettings
|
|
alarmSettingsTest OBJECT-TYPE
|
|
SYNTAX INTEGER {set(1),clear(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Allow to get and set the alarm output status.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettings 1 }
|
|
|
|
alarmSettingsPower1DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsPower1Down 1 }
|
|
|
|
alarmSettingsPower1DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsPower1Down 2 }
|
|
|
|
alarmSettingsPower1DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsPower1Down 3 }
|
|
|
|
alarmSettingsPower2DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsPower2Down 1 }
|
|
|
|
alarmSettingsPower2DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsPower2Down 2 }
|
|
|
|
alarmSettingsPower2DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsPower2Down 3 }
|
|
|
|
alarmSettingsLan1DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan1Down 1 }
|
|
|
|
alarmSettingsLan1DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan1Down 2 }
|
|
|
|
alarmSettingsLan1DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan1Down 3 }
|
|
|
|
alarmSettingsLan2DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan2Down 1 }
|
|
|
|
alarmSettingsLan2DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan2Down 2 }
|
|
|
|
alarmSettingsLan2DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan2Down 3 }
|
|
|
|
alarmSettingsLan3DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan3Down 1 }
|
|
|
|
alarmSettingsLan3DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan3Down 2 }
|
|
|
|
alarmSettingsLan3DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan3Down 3 }
|
|
|
|
alarmSettingsLan4DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan4Down 1 }
|
|
|
|
alarmSettingsLan4DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan4Down 2 }
|
|
|
|
alarmSettingsLan4DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan4Down 3 }
|
|
|
|
alarmSettingsLan5DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan5Down 1 }
|
|
|
|
alarmSettingsLan5DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan5Down 2 }
|
|
|
|
alarmSettingsLan5DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan5Down 3 }
|
|
|
|
alarmSettingsLan6DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan6Down 1 }
|
|
|
|
alarmSettingsLan6DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan6Down 2 }
|
|
|
|
alarmSettingsLan6DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan6Down 3 }
|
|
|
|
alarmSettingsLan7DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan7Down 1 }
|
|
|
|
alarmSettingsLan7DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan7Down 2 }
|
|
|
|
alarmSettingsLan7DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan7Down 3}
|
|
|
|
alarmSettingsLan8DownEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan8Down 1 }
|
|
|
|
alarmSettingsLan8DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsLan8Down 2 }
|
|
|
|
alarmSettingsLan8DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsLan8Down 3 }
|
|
alarmSettingsWLANDownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsWLANDown 1 }
|
|
|
|
alarmSettingsWLANDownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1:5.52.0]
|
|
"
|
|
::= { alarmSettingsWLANDown 2 }
|
|
|
|
alarmSettingsWLANDownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
[FW:E2080.AC.1:5.52.0]
|
|
|
|
"
|
|
::= { alarmSettingsWLANDown 3 }
|
|
|
|
-- powerStatus
|
|
powerStatus-PW1-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Power 1 state
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { powerStatus 1 }
|
|
|
|
powerStatus-PW2-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Power 2 state
|
|
[FW:E2080.AC.1:5.52.0]
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { powerStatus 2 }
|
|
--***********************
|
|
-- Serial interface
|
|
|
|
-- ------------------------
|
|
-- +++ Serial format +++
|
|
|
|
serialFormatBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialFormat 1 }
|
|
|
|
serialFormatDataBit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
6,7,8 data bit
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialFormat 2 }
|
|
|
|
serialFormatParityBit OBJECT-TYPE
|
|
SYNTAX INTEGER {none(1),odd(2),even(3),mark(4),space(5)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialFormat 3 }
|
|
|
|
serialFormatStopBit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 or 2 stop bits
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialFormat 4 }
|
|
|
|
serialElectricalInterface OBJECT-TYPE
|
|
SYNTAX INTEGER {rs232(1), rs422Master(2), rs422Slave(3), rs485NoEcho(4), rs485echo(5)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Select electrical serial interface (RS232, RS422 master / slave, RS485 echo /no echo
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialFormat 5 }
|
|
|
|
-- ------------------------
|
|
-- +++ Serial triggers +++
|
|
|
|
--send trigger char count
|
|
sendTriggerCharCountEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(2),disable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enable / disable this sendtrigger
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerCharcount 1 }
|
|
|
|
sendTriggerCharCountValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
number of chars required in the buffer before emission to the client application.
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerCharcount 2 }
|
|
|
|
--send trigger Frame delay
|
|
|
|
sendTriggerFrameDelayEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(2),disable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enable / disable this sendtrigger
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerFrameDelay 1 }
|
|
|
|
sendTriggerFrameDelayValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
delay between char reception and emission to the client application.
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerFrameDelay 2 }
|
|
|
|
sendTriggerFrameDelayUnit OBJECT-TYPE
|
|
SYNTAX INTEGER {charTime(1),millisecond(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Unit of send trigger
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerFrameDelay 3 }
|
|
|
|
-- Send trigger idle delay
|
|
|
|
sendTriggerIdleDelayEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(2),disable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Enable / disable this sendtrigger
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerIdleDelay 1 }
|
|
|
|
sendTriggerIdleDelayValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
delay between last char reception and emission to the client application
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerIdleDelay 2 }
|
|
|
|
sendTriggerIdleDelayUnit OBJECT-TYPE
|
|
SYNTAX INTEGER {charTime(1),millisecond(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Unit
|
|
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialSendTriggerIdleDelay 3 }
|
|
|
|
|
|
-- Serial services
|
|
|
|
serialServicetype OBJECT-TYPE
|
|
SYNTAX INTEGER {virtualcom(1), modbusTcpSlave(2),modbusTcpMaster(3),tcpRawPortServer(4),tcpRawPortClient(5),udpRawPortServer(6),serialServiceInvalid(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the type of service provided to the remote stations
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialInterface 1 }
|
|
|
|
--***********************
|
|
-- Serial interface Virtual port com (VIP)
|
|
--***********************
|
|
-- Serial interface ModbuSlave
|
|
|
|
modbusSlaveFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {ascii(1),rtu(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceModbusSlave 1 }
|
|
|
|
modbusSlaveSerialTransactionTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceModbusSlave 2 }
|
|
|
|
-- Tcp raw port server
|
|
|
|
--Extra configuration for serial port
|
|
|
|
trsExtraConfigDTR OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), tcpConnected(2), inputFlow(4), low(5), high(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawServerSerialExtraConfig 1 }
|
|
|
|
trsExtraConfigRTS OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), modem(2), inputFlow(4), low(5), high(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawServerSerialExtraConfig 2 }
|
|
|
|
trsExtraConfigDSR OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), acceptCall(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawServerSerialExtraConfig 3 }
|
|
|
|
trsExtraConfigCTS OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), outputFlow(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawServerSerialExtraConfig 4 }
|
|
|
|
trsExtraConfigDCD OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), rxData(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawServerSerialExtraConfig 5 }
|
|
|
|
trsExtraConfigXonXoff OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), flowControl(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawServerSerialExtraConfig 6 }
|
|
|
|
-- **********************
|
|
-- udp raw port server
|
|
udpRawServerRemoteIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
IP address of the remote network device, to which we send data. Using IP address 255.255.255.255 allows multidrop communication
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceUdpRawPortServer 2}
|
|
|
|
udpRawServerRemotePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UDP port of the remote network device, used as a destination UDP port when we send data to remote devices on the network. If 0, local port is used.
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceUdpRawPortServer 3}
|
|
|
|
udpRawServerLocalPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Our receiving UDP port (remote devices on the network use this destination to send us data)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceUdpRawPortServer 4}
|
|
|
|
ursExtraConfigDTR OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), low(5), high(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { udpRawServerSerialExtraConfig 1 }
|
|
|
|
ursExtraConfigRTS OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), modem(2), inputFlow(4), low(5), high(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { udpRawServerSerialExtraConfig 2 }
|
|
|
|
ursExtraConfigCTS OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), outputFlow(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { udpRawServerSerialExtraConfig 3 }
|
|
|
|
ursExtraConfigXonXoff OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), flowControl(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { udpRawServerSerialExtraConfig 4 }
|
|
|
|
-- modbus master
|
|
-- modbus master serial format
|
|
|
|
modbusMasterFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {ascii(1),rtu(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceModbusMaster 1 }
|
|
|
|
modbusMasterTransactionTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
If the MODBUS/TCP slave device does not respond in the given time, an error response will be sent to the serial master.
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceModbusMaster 2 }
|
|
|
|
mmForwardingTable-Rule1-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule1 1 }
|
|
|
|
mmForwardingTable-Rule1-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule1 2 }
|
|
|
|
mmForwardingTable-Rule1-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule1 3 }
|
|
|
|
mmForwardingTable-Rule1-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule1 4 }
|
|
|
|
mmForwardingTable-Rule1-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule1 5 }
|
|
|
|
|
|
mmForwardingTable-Rule2-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule2 1 }
|
|
|
|
mmForwardingTable-Rule2-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule2 2 }
|
|
|
|
mmForwardingTable-Rule2-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule2 3 }
|
|
|
|
mmForwardingTable-Rule2-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule2 4 }
|
|
|
|
mmForwardingTable-Rule2-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule2 5 }
|
|
|
|
mmForwardingTable-Rule3-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule3 1 }
|
|
|
|
mmForwardingTable-Rule3-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule3 2 }
|
|
|
|
mmForwardingTable-Rule3-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule3 3 }
|
|
|
|
mmForwardingTable-Rule3-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule3 4 }
|
|
|
|
mmForwardingTable-Rule3-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule3 5 }
|
|
|
|
mmForwardingTable-Rule4-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule4 1 }
|
|
|
|
mmForwardingTable-Rule4-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule4 2 }
|
|
|
|
mmForwardingTable-Rule4-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule4 3 }
|
|
|
|
mmForwardingTable-Rule4-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule4 4 }
|
|
|
|
mmForwardingTable-Rule4-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule4 5 }
|
|
|
|
mmForwardingTable-Rule5-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule5 1 }
|
|
|
|
mmForwardingTable-Rule5-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule5 2 }
|
|
|
|
mmForwardingTable-Rule5-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule5 3 }
|
|
|
|
mmForwardingTable-Rule5-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule5 4 }
|
|
|
|
mmForwardingTable-Rule5-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule5 5 }
|
|
|
|
mmForwardingTable-Rule6-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule6 1 }
|
|
|
|
mmForwardingTable-Rule6-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule6 2 }
|
|
|
|
mmForwardingTable-Rule6-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule6 3 }
|
|
|
|
mmForwardingTable-Rule6-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule6 4 }
|
|
|
|
mmForwardingTable-Rule6-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule6 5 }
|
|
|
|
mmForwardingTable-Rule7-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule7 1 }
|
|
|
|
mmForwardingTable-Rule7-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule7 2 }
|
|
|
|
mmForwardingTable-Rule7-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule7 3 }
|
|
|
|
mmForwardingTable-Rule7-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule7 4 }
|
|
|
|
mmForwardingTable-Rule7-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule7 5 }
|
|
|
|
mmForwardingTable-Rule8-FirstLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule8 1 }
|
|
|
|
mmForwardingTable-Rule8-LastLocalAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Last MODBUS serial address (local)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule8 2 }
|
|
|
|
mmForwardingTable-Rule8-FirstRemoteAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
First MODBUS TCP ID field (remote serial address)
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule8 3 }
|
|
|
|
mmForwardingTable-Rule8-SlaveIpAddrIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER {fixed(1),variable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1 = last byte of IP address fixed
|
|
2 = last byte of IP address variable
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule8 4 }
|
|
|
|
mmForwardingTable-Rule8-SlaveIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { modbusMasterForwardingTable-Rule8 5 }
|
|
|
|
-- raw Tcp client
|
|
--Extra configuration for serial port
|
|
|
|
trcExtraConfigDTR OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), low(5), high(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientSerialExtraConfig 1 }
|
|
|
|
trcExtraConfigRTS OBJECT-TYPE
|
|
SYNTAX INTEGER {default(1), modem(2), inputFlow(4), low(5), high(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientSerialExtraConfig 2 }
|
|
|
|
|
|
|
|
trcExtraConfigCTS OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), outputFlow(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientSerialExtraConfig 4 }
|
|
|
|
trcExtraConfigDCD OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), rxData(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientSerialExtraConfig 5 }
|
|
|
|
trcExtraConfigXonXoff OBJECT-TYPE
|
|
SYNTAX INTEGER {ignore(1), flowControl(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientSerialExtraConfig 6 }
|
|
|
|
tcpRawClientConnectionTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
How long before we give up trying to call a server. 0 means indefinitely.
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceTcpRawPortClient 4 }
|
|
|
|
tcpRawClientPollPeriode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
How long we wait between two scans of the servers list (in case no server is available).
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceTcpRawPortClient 5 }
|
|
|
|
tcpRawClientDSRUse OBJECT-TYPE
|
|
SYNTAX INTEGER {notUsed(1),graceful(2),fast(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
How the DSR pin causes server calls and connection terminations
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { serialServiceTcpRawPortClient 6 }
|
|
|
|
-- server table
|
|
tcpRawClienServer1-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer1 1 }
|
|
|
|
tcpRawclientServer1-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer1 2 }
|
|
|
|
tcpRawclientServer2-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer2 1 }
|
|
|
|
tcpRawclientServer2-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer2 2 }
|
|
|
|
tcpRawclientServer3-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer3 1 }
|
|
|
|
tcpRawclientServer3-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer3 2 }
|
|
|
|
tcpRawclientServer4-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer4 1 }
|
|
|
|
tcpRawclientServer4-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer4 2 }
|
|
|
|
tcpRawclientServer5-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer5 1 }
|
|
|
|
tcpRawclientServer5-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer5 2 }
|
|
|
|
tcpRawclientServer6-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer6 1 }
|
|
|
|
tcpRawclientServer6-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer6 2 }
|
|
|
|
tcpRawclientServer7-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer7 1 }
|
|
|
|
tcpRawclientServer7-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer7 2 }
|
|
|
|
tcpRawclientServer8-IpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer8 1 }
|
|
|
|
tcpRawclientServer8-TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
[FW:E2080.AC.1-Serial:5.10.0]
|
|
"
|
|
::= { tcpRawClientServer8 2 }
|
|
|
|
-- =========================================
|
|
-- networkStatus (current operational state)
|
|
--
|
|
|
|
-- Tables - IP subnets
|
|
|
|
statusIpSubnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusIpSubnetEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of logical networks (level 3).
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { networkStatus 1 }
|
|
|
|
statusIpSubnetEntry OBJECT-TYPE
|
|
SYNTAX StatusIpSubnetEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains network information."
|
|
INDEX { statusIpSubnetIndex }
|
|
::= { statusIpSubnetTable 1 }
|
|
|
|
StatusIpSubnetEntry ::=
|
|
SEQUENCE {
|
|
statusIpSubnetIndex INTEGER
|
|
,statusIpSubnetName NetifName
|
|
,statusIpSubnetLabel DisplayString
|
|
,statusIpSubnetIfIndex INTEGER
|
|
,statusIpSubnetAddrMode INTEGER
|
|
,statusIpSubnetIPv4Addr IpAddress
|
|
,statusIpSubnetIPv4Mask IpAddress
|
|
,statusIpSubnetDNS DisplayString
|
|
,statusIpSubnetMember DisplayString
|
|
,statusIpSubnetMemberIndex DisplayString
|
|
}
|
|
statusIpSubnetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Network index"
|
|
::= { statusIpSubnetEntry 1 }
|
|
|
|
statusIpSubnetName OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Network interface name"
|
|
::= { statusIpSubnetEntry 2 }
|
|
|
|
statusIpSubnetLabel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Network friendly name"
|
|
::= { statusIpSubnetEntry 3 }
|
|
|
|
statusIpSubnetIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Network kernel index"
|
|
::= { statusIpSubnetEntry 4 }
|
|
|
|
statusIpSubnetAddrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {static(1),dhcp(2),none(3),vrrp(4)}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Ip address protocol of this network"
|
|
::= { statusIpSubnetEntry 5 }
|
|
|
|
statusIpSubnetIPv4Addr OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Current IPv4 address of this network"
|
|
::= { statusIpSubnetEntry 6 }
|
|
|
|
statusIpSubnetIPv4Mask OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Current IPv4 subnet mask of this network"
|
|
::= { statusIpSubnetEntry 7 }
|
|
|
|
statusIpSubnetDNS OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Space-separated list of DNS IP addresses"
|
|
::= { statusIpSubnetEntry 8 }
|
|
|
|
statusIpSubnetMember OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Space-separated list that contains name of interfaces related to this network"
|
|
::= { statusIpSubnetEntry 9 }
|
|
|
|
statusIpSubnetMemberIndex OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Space-separated list that contains kernel index of interfaces related to this network"
|
|
::= { statusIpSubnetEntry 10 }
|
|
|
|
--Tables - Wi-Fi SSIDs
|
|
statusIfWlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusIfWlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of Wi-Fi service sets (ESSID, ISSID)
|
|
with an IP address
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 2 }
|
|
|
|
statusIfWlanEntry OBJECT-TYPE
|
|
SYNTAX StatusIfWlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a Wi-Fi service set"
|
|
INDEX { statusIfWlanIndex }
|
|
::= { statusIfWlanTable 1 }
|
|
|
|
-- Tables - radio devices
|
|
statusPhyWifiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusPhyWifiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information about Wi-Fi adapters.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 3 }
|
|
|
|
statusPhyWifiEntry OBJECT-TYPE
|
|
SYNTAX StatusPhyWifiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a Wi-Fi service set"
|
|
INDEX { statusPhyWifiIndex }
|
|
::= { statusPhyWifiTable 1 }
|
|
|
|
-- Tables - Wifi scan
|
|
statusPhyWifiScanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusPhyWifiScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of Wi-Fi access points devices around
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 4 }
|
|
|
|
statusPhyWifiScanEntry OBJECT-TYPE
|
|
SYNTAX StatusPhyWifiScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a Wi-Fi access point"
|
|
INDEX { statusPhyWifiScanTableIndex }
|
|
::= { statusPhyWifiScanTable 1 }
|
|
|
|
-- Scan launch OID
|
|
statusPhyWifiScanTableStart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Write (any value) to start a scan. Poll the statusPhyWifiScanUpdateTbl
|
|
OID to know the status of the current scan : inprogress or available
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 5 }
|
|
|
|
-- Scan launch OID
|
|
statusPhyWifiScanUpdateTbl OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns inprogress if current scan isn't finished yet.
|
|
Returns available if the current scan results are available. In this
|
|
case, the ScanTable will be updated with the new values.
|
|
An ESSID can be given to filter the scan result. In this case, the
|
|
device with an ESSID different than the given filter will be excluded.
|
|
This filter is reseted by a writting the statusPhyWifiScanTableStart OID.
|
|
Note that this OID have to be polled to know when the scan ends.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 6 }
|
|
|
|
-- Elements in the Wi-Fi service sets status table
|
|
|
|
StatusIfWlanEntry ::=
|
|
SEQUENCE {
|
|
statusIfWlanIndex INTEGER,
|
|
statusIfWlanSSID OCTET STRING,
|
|
statusIfWlanMode INTEGER,
|
|
statusIfWlanBand WifiFlavor,
|
|
statusIfWlanChannel INTEGER,
|
|
statusIfWlanFrequency INTEGER,
|
|
statusIfWlanEnable INTEGER,
|
|
statusIfWlanPhy INTEGER,
|
|
statusIfWlanSecurityMode INTEGER,
|
|
statusIfWlanWpaVersion INTEGER,
|
|
statusIfWlanNPeers INTEGER,
|
|
statusIfWlanQuality INTEGER,
|
|
statusIfWlanBssid PhysAddress,
|
|
statusIfWlanState INTEGER,
|
|
statusIfStaFastBSSTransitionActivated DisableEnable,
|
|
statusIfWlanBeaconSignalAvg INTEGER,
|
|
statusIfWlanNoise INTEGER,
|
|
statusIfWlanWpaCipher CipherTypes,
|
|
statusIfWlanWpaPreSharedKey OCTET STRING,
|
|
statusIfWlanName DisplayString,
|
|
statusIfWlanIfIndex INTEGER
|
|
}
|
|
|
|
statusIfWlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wlan index"
|
|
::= { statusIfWlanEntry 1 }
|
|
|
|
statusIfWlanSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "SSID string"
|
|
::= { statusIfWlanEntry 2 }
|
|
|
|
statusIfWlanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
infra-client(1),
|
|
access-point(2),
|
|
ad-hoc(3),
|
|
monitor(5),
|
|
ieee80211s(6),
|
|
repeater(7),
|
|
isolating-access-point(8)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "STA role"
|
|
::= { statusIfWlanEntry 3 }
|
|
|
|
statusIfWlanBand OBJECT-TYPE
|
|
SYNTAX WifiFlavor MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wlan band/modulation type mix"
|
|
::= { statusIfWlanEntry 4 }
|
|
|
|
statusIfWlanChannel OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wlan channel (frequency span index):
|
|
-1 channel indicates that the product is searching for a channel"
|
|
::= { statusIfWlanEntry 5 }
|
|
|
|
statusIfWlanFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio frequency:
|
|
0 frequency indicates that the product is searching for a radio frequency"
|
|
::= { statusIfWlanEntry 6 }
|
|
|
|
statusIfWlanEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Operational state"
|
|
::= { statusIfWlanEntry 7 }
|
|
|
|
statusIfWlanPhy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "PHY index for this wlan"
|
|
::= { statusIfWlanEntry 8 }
|
|
|
|
statusIfWlanSecurityMode OBJECT-TYPE
|
|
SYNTAX SecurityModes
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Security policy"
|
|
::= { statusIfWlanEntry 9 }
|
|
|
|
statusIfWlanWpaVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "WPA version (version 1 is deprecated)"
|
|
::= { statusIfWlanEntry 10 }
|
|
|
|
statusIfWlanNPeers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Number of peer clients"
|
|
::= { statusIfWlanEntry 11 }
|
|
|
|
statusIfWlanQuality OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio link quality"
|
|
::= { statusIfWlanEntry 12 }
|
|
|
|
statusIfWlanBssid OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "BSSID"
|
|
::= { statusIfWlanEntry 13 }
|
|
|
|
statusIfWlanState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-connected(0)
|
|
,connected(9)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Connection state"
|
|
::= { statusIfWlanEntry 14 }
|
|
|
|
statusIfStaFastBSSTransitionActivated OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "802.11r support (dot11FastBSSTransitionActivated)"
|
|
::= { statusIfWlanEntry 15 }
|
|
|
|
statusIfWlanBeaconSignalAvg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Signal level average in dBm of the last few beacons received
|
|
Before WaveOS V2.8.0.1, this OID gives the last beacon signal
|
|
After WaveOS V2.8.0.1, this OID gives the avg of the last few beacons received"
|
|
::= { statusIfWlanEntry 16 }
|
|
|
|
statusIfWlanNoise OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Noise level in dBm"
|
|
::= { statusIfWlanEntry 17 }
|
|
|
|
statusIfWlanWpaCipher OBJECT-TYPE
|
|
SYNTAX CipherTypes
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "WPA cipher"
|
|
::= { statusIfWlanEntry 18 }
|
|
|
|
statusIfWlanWpaPreSharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "WPA PSK pre-shared key"
|
|
::= { statusIfWlanEntry 19 }
|
|
|
|
statusIfWlanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wireless interface name
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { statusIfWlanEntry 20 }
|
|
|
|
statusIfWlanIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wireless interface kernel index
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { statusIfWlanEntry 21 }
|
|
|
|
-- Elements in the radio cards status table
|
|
|
|
StatusPhyWifiEntry ::=
|
|
SEQUENCE {
|
|
statusPhyWifiIndex INTEGER
|
|
,statusPhyWifiLabel DisplayString
|
|
,statusPhyWifiEnable INTEGER
|
|
,statusPhyWifiName NetifName
|
|
,statusPhyWifiClusterMode OCTET STRING
|
|
,statusPhyWifiClusterList OCTET STRING
|
|
,statusPhyWifiClusterArgs OCTET STRING
|
|
,statusPhyWifiMAC PhysAddress
|
|
,statusPhyWifiWids INTEGER
|
|
-- ,statusPhyWifiMaxScanSsid INTEGER
|
|
-- ,statusPhyWifiRtsThreshold INTEGER
|
|
}
|
|
|
|
statusPhyWifiIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device index"
|
|
::= { statusPhyWifiEntry 1 }
|
|
|
|
statusPhyWifiLabel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Friendly name"
|
|
::= { statusPhyWifiEntry 2 }
|
|
|
|
statusPhyWifiEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Operational state"
|
|
::= { statusPhyWifiEntry 3 }
|
|
|
|
statusPhyWifiName OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Friendly name"
|
|
::= { statusPhyWifiEntry 4 }
|
|
|
|
statusPhyWifiClusterMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Cluster mode, empty for none, 'dualscan' for data/scan separation"
|
|
::= { statusPhyWifiEntry 5 }
|
|
|
|
statusPhyWifiClusterList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "List of device names in the cluster, e.g. 'radio0 radio1'"
|
|
::= { statusPhyWifiEntry 6 }
|
|
|
|
statusPhyWifiClusterArgs OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Cluster params for this device. For 'dualscan' mode,
|
|
one device must be set to 'scan',
|
|
the others in the cluster must be set to 'data'."
|
|
::= { statusPhyWifiEntry 7 }
|
|
|
|
statusPhyWifiMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "MAC address of the radio device
|
|
[FW:E2148.AC.1:3.14.0.1]"
|
|
::= { statusPhyWifiEntry 8 }
|
|
|
|
statusPhyWifiWids OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "WIDS services state. 0: not started.
|
|
1: currently monitoring for rogue APs.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { statusPhyWifiEntry 9 }
|
|
|
|
StatusPhyWifiScanEntry ::=
|
|
SEQUENCE {
|
|
statusPhyWifiScanTableIndex INTEGER
|
|
,statusPhyWifiScanSSID OCTET STRING
|
|
,statusPhyWifiScanSignal INTEGER
|
|
,statusPhyWifiScanFreq INTEGER
|
|
,statusPhyWifiScanMode INTEGER
|
|
,statusPhyWifiScanSecurity SecurityModes
|
|
,statusPhyWifiScanBssid PhysAddress
|
|
,statusPhyWifiScanPhyNum INTEGER
|
|
,statusPhyWifiScanChWidth INTEGER
|
|
}
|
|
|
|
statusPhyWifiScanTableIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device index"
|
|
::= { statusPhyWifiScanEntry 1 }
|
|
|
|
statusPhyWifiScanSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device SSID"
|
|
::= { statusPhyWifiScanEntry 2 }
|
|
|
|
statusPhyWifiScanSignal OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device signal power in dBm"
|
|
::= { statusPhyWifiScanEntry 3}
|
|
|
|
statusPhyWifiScanFreq OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device central frequency (in MHz)"
|
|
::= { statusPhyWifiScanEntry 4 }
|
|
|
|
statusPhyWifiScanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1)
|
|
,infrastructure(2)
|
|
,adhoc(3)
|
|
,mesh(4)
|
|
} MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device mode"
|
|
::= { statusPhyWifiScanEntry 5 }
|
|
|
|
statusPhyWifiScanSecurity OBJECT-TYPE
|
|
SYNTAX SecurityModes MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device mode"
|
|
::= { statusPhyWifiScanEntry 6 }
|
|
|
|
statusPhyWifiScanBssid OBJECT-TYPE
|
|
SYNTAX PhysAddress MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device bssid"
|
|
::= { statusPhyWifiScanEntry 7 }
|
|
|
|
statusPhyWifiScanPhyNum OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Scan phy index"
|
|
::= { statusPhyWifiScanEntry 8 }
|
|
|
|
statusPhyWifiScanChWidth OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio device channel width
|
|
[FW:E2148.AC.1:4.8.0.1]"
|
|
::= { statusPhyWifiScanEntry 9 }
|
|
|
|
--statusPhyWifiMaxScanSsid OBJECT-TYPE
|
|
-- SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
-- DESCRIPTION "Max number of scan SSIDs"
|
|
-- ::= { statusPhyWifiEntry 4 }
|
|
|
|
--statusPhyWifiRtsThreshold OBJECT-TYPE
|
|
-- SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
-- DESCRIPTION "RTS threshold"
|
|
-- ::= { statusPhyWifiEntry 5 }
|
|
|
|
statusSpanningTreeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusSpanningTreeEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information related to STP
|
|
about every bridge
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 7 }
|
|
|
|
statusSpanningTreeEntry OBJECT-TYPE
|
|
SYNTAX StatusSpanningTreeEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A list of objects containing information for each Bridge
|
|
about the Spanning Tree Protocol for that Bridge."
|
|
INDEX { statusSpanningTreeBridgeName }
|
|
::= { statusSpanningTreeTable 1 }
|
|
|
|
-- Bridge elements
|
|
|
|
StatusSpanningTreeEntry ::=
|
|
SEQUENCE {
|
|
statusSpanningTreeBridgeName NetifName -- lan
|
|
,statusSpanningTreeNetworkLabel DisplayString
|
|
,statusSpanningTreeBridgeId BridgeId
|
|
,statusSpanningTreeDesignatedRoot BridgeId
|
|
,statusSpanningTreeRootPort NetifName
|
|
}
|
|
|
|
statusSpanningTreeBridgeName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the bridge for which this entry
|
|
contains Spanning Tree Protocol management information.
|
|
Referred to in the general Interfaces table."
|
|
::= { statusSpanningTreeEntry 1 }
|
|
|
|
statusSpanningTreeNetworkLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The network label that contains the current bridge."
|
|
::= { statusSpanningTreeEntry 2 }
|
|
|
|
statusSpanningTreeBridgeId OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The bridge Id. It is made up using the bridge priority
|
|
and the base MAC address of the bridge."
|
|
::= { statusSpanningTreeEntry 3 }
|
|
|
|
statusSpanningTreeDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Root Bridge for the Spanning tree.
|
|
It is made up using the bridge priority
|
|
and the base MAC address of the bridge."
|
|
::= { statusSpanningTreeEntry 4 }
|
|
|
|
statusSpanningTreeRootPort OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The root port name of the current bridge.
|
|
none is set if there is no root port in the bridge"
|
|
::= { statusSpanningTreeEntry 5 }
|
|
|
|
statusSpanningTreePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusSpanningTreePortEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains port-specific information
|
|
for the Spanning Tree Protocol.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { networkStatus 8 }
|
|
|
|
statusSpanningTreePortEntry OBJECT-TYPE
|
|
SYNTAX StatusSpanningTreePortEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A list of objects containing information maintained by
|
|
every port about the Spanning Tree Protocol state
|
|
for that port."
|
|
INDEX { statusSpanningTreePortBridgeName , statusSpanningTreePortName }
|
|
::= { statusSpanningTreePortTable 1 }
|
|
|
|
StatusSpanningTreePortEntry ::=
|
|
SEQUENCE {
|
|
statusSpanningTreePortBridgeName NetifName
|
|
,statusSpanningTreePortNetworkLabel DisplayString
|
|
,statusSpanningTreePortName NetifName
|
|
,statusSpanningTreePortLabel DisplayString
|
|
,statusSpanningTreePortId PortId
|
|
,statusSpanningTreePortRole INTEGER
|
|
,statusSpanningTreePortState INTEGER
|
|
,statusSpanningTreePortPathCost Integer32
|
|
,statusSpanningTreePortDesignatedRoot BridgeId
|
|
,statusSpanningTreePortDesignatedCost Integer32
|
|
,statusSpanningTreePortDesignatedBridge BridgeId
|
|
,statusSpanningTreePortDesignatedPort PortId
|
|
,statusSpanningTreePortOperEdgePort TruthValue
|
|
,statusSpanningTreePortOperPointToPoint TruthValue
|
|
}
|
|
|
|
statusSpanningTreePortBridgeName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the bridge for which this entry
|
|
contains Spanning Tree Protocol management information.
|
|
Referred to in the general Interfaces table."
|
|
::= { statusSpanningTreePortEntry 1 }
|
|
|
|
statusSpanningTreePortNetworkLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The network label that contains the current bridge."
|
|
::= { statusSpanningTreePortEntry 2 }
|
|
|
|
statusSpanningTreePortName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The name of the port for which this entry
|
|
contains Spanning Tree Protocol management information.
|
|
Referred to in the general Interfaces table."
|
|
::= { statusSpanningTreePortEntry 3 }
|
|
|
|
statusSpanningTreePortLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Port label for the specified port."
|
|
::= { statusSpanningTreePortEntry 4 }
|
|
|
|
statusSpanningTreePortId OBJECT-TYPE
|
|
SYNTAX PortId
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Port identifier for the specified port,
|
|
it is made up from the port priority
|
|
and the interface number of the port."
|
|
::= { statusSpanningTreePortEntry 5 }
|
|
|
|
statusSpanningTreePortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
root(1),
|
|
designated(2),
|
|
alternate(3),
|
|
backup(4),
|
|
master(5)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The port's current role in the Spanning Tree"
|
|
::= { statusSpanningTreePortEntry 6 }
|
|
|
|
statusSpanningTreePortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
discarding(0),
|
|
learning(1),
|
|
forwarding(2)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The port's current state in the Spanning Tree"
|
|
::= { statusSpanningTreePortEntry 7 }
|
|
|
|
statusSpanningTreePortPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200000000)
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The contribution of this port to the path cost
|
|
of paths towards the spanning tree root
|
|
which include this port."
|
|
::= { statusSpanningTreePortEntry 8 }
|
|
|
|
statusSpanningTreePortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
::= { statusSpanningTreePortEntry 9 }
|
|
|
|
statusSpanningTreePortDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The path cost of the Designated Port of the segment
|
|
connected to this port."
|
|
::= { statusSpanningTreePortEntry 10 }
|
|
|
|
statusSpanningTreePortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The Bridge Identifier of the Bridge that this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
::= { statusSpanningTreePortEntry 11 }
|
|
|
|
statusSpanningTreePortDesignatedPort OBJECT-TYPE
|
|
SYNTAX PortId
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
::= { statusSpanningTreePortEntry 12 }
|
|
|
|
statusSpanningTreePortOperEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The operational value of the Edge Port parameter.
|
|
A value of true(1) indicates that this port should be
|
|
assumed as an edge-port, and a value of false(2) indicates
|
|
that this port should be assumed as a non-edge-port."
|
|
::= { statusSpanningTreePortEntry 13 }
|
|
|
|
statusSpanningTreePortOperPointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The operational value of the Point to Point parameter.
|
|
A value of true(1) indicates that this port is
|
|
point to point, otherwise set to false(2)"
|
|
::= { statusSpanningTreePortEntry 14 }
|
|
|
|
statusAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusAssociationEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of associated stations.
|
|
[FW:E2148.AC.1:3.12.0.1]"
|
|
::= { networkStatus 9 }
|
|
|
|
statusAssociationEntry OBJECT-TYPE
|
|
SYNTAX StatusAssociationEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of associated stations."
|
|
INDEX { statusAssociationIndex }
|
|
::= { statusAssociationTable 1 }
|
|
|
|
StatusAssociationEntry ::=
|
|
SEQUENCE {
|
|
statusAssociationIndex INTEGER
|
|
,statusAssociationMacAddr PhysAddress
|
|
,statusAssociationSSID DisplayString
|
|
,statusAssociationBSSID PhysAddress
|
|
,statusAssociationPhy DisplayString
|
|
,statusAssociationSignaldBm INTEGER
|
|
,statusAssociationNoisedBm INTEGER
|
|
,statusAssociationSNR INTEGER
|
|
,statusAssociationWlanIndex INTEGER
|
|
,statusAssociationSecurityMode SecurityModes
|
|
}
|
|
|
|
statusAssociationIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Associated station index"
|
|
::= { statusAssociationEntry 1 }
|
|
|
|
statusAssociationMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "MAC address of the associated station"
|
|
::= { statusAssociationEntry 2 }
|
|
|
|
statusAssociationSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "SSID of the associated station"
|
|
::= { statusAssociationEntry 3 }
|
|
|
|
statusAssociationBSSID OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "BSSID of the associated station"
|
|
::= { statusAssociationEntry 4 }
|
|
|
|
statusAssociationPhy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "radio name of the radio that the station connects"
|
|
::= { statusAssociationEntry 5 }
|
|
|
|
statusAssociationSignaldBm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "RSSI level in dBm"
|
|
::= { statusAssociationEntry 6 }
|
|
|
|
statusAssociationNoisedBm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Noise level in dBm"
|
|
::= { statusAssociationEntry 7 }
|
|
|
|
statusAssociationSNR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Signal-to-noise ratio"
|
|
::= { statusAssociationEntry 8 }
|
|
|
|
statusAssociationWlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Index of the role that the station connects
|
|
[FW:E2148.AC.1:3.12.9.1]"
|
|
::= { statusAssociationEntry 9 }
|
|
|
|
statusAssociationSecurityMode OBJECT-TYPE
|
|
SYNTAX SecurityModes
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Security policy
|
|
[FW:E2148.CA.1:4.8.0.1-R3]"
|
|
::= { statusAssociationEntry 10 }
|
|
|
|
statusPhyLanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusPhyLanEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of physical ethernet adapter.
|
|
[FW:E2148.AC.1:3.12.0.1]"
|
|
::= { networkStatus 10 }
|
|
|
|
statusPhyLanEntry OBJECT-TYPE
|
|
SYNTAX StatusPhyLanEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of physical ethernet adapter."
|
|
INDEX { statusPhyLanIndex }
|
|
::= { statusPhyLanTable 1 }
|
|
|
|
StatusPhyLanEntry ::=
|
|
SEQUENCE {
|
|
statusPhyLanIndex INTEGER
|
|
,statusPhyLanName DisplayString
|
|
,statusPhyLanLabel DisplayString
|
|
,statusPhyLanIfIndex INTEGER
|
|
}
|
|
|
|
statusPhyLanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Physical ethernet index"
|
|
::= { statusPhyLanEntry 1 }
|
|
|
|
statusPhyLanName OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Physical ethernet adapter interface name"
|
|
::= { statusPhyLanEntry 2 }
|
|
|
|
statusPhyLanLabel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Physical ethernet adapter friendly name"
|
|
::= { statusPhyLanEntry 3 }
|
|
|
|
statusPhyLanIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Physical ethernet kernel index"
|
|
::= { statusPhyLanEntry 4 }
|
|
|
|
|
|
statusMeshSurveyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusMeshSurveyEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of mesh survey.
|
|
[FW:E2148.AC.1:3.12.9.1]"
|
|
::= { networkStatus 11 }
|
|
|
|
statusMeshSurveyEntry OBJECT-TYPE
|
|
SYNTAX StatusMeshSurveyEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "A table that contains information of mesh survey."
|
|
INDEX { statusMeshSurveyIndex }
|
|
::= { statusMeshSurveyTable 1 }
|
|
|
|
StatusMeshSurveyEntry ::=
|
|
SEQUENCE {
|
|
statusMeshSurveyIndex INTEGER
|
|
,statusMeshSurveyDstMacAddr PhysAddress
|
|
,statusMeshSurveyNextHopMacAddr PhysAddress
|
|
,statusMeshSurveyPhy DisplayString
|
|
,statusMeshSurveyMetric INTEGER
|
|
,statusMeshSurveyDiscoveryTimeout INTEGER
|
|
,statusMeshSurveyDiscoveryRetries INTEGER
|
|
,statusMeshSurveyStateActive TruthValue
|
|
,statusMeshSurveyStateResolving TruthValue
|
|
,statusMeshSurveyStateDSNValid TruthValue
|
|
,statusMeshSurveyStateFixed TruthValue
|
|
,statusMeshSurveyStateResolved TruthValue
|
|
,statusMeshSurveyMeshId DisplayString
|
|
,statusMeshSurveyWlanIndex INTEGER
|
|
}
|
|
|
|
statusMeshSurveyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Mesh survey index"
|
|
::= { statusMeshSurveyEntry 1 }
|
|
|
|
statusMeshSurveyDstMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Destination MAC address of the mesh path"
|
|
::= { statusMeshSurveyEntry 2 }
|
|
|
|
statusMeshSurveyNextHopMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "MAC address of the next mesh point to reach destination MAC address"
|
|
::= { statusMeshSurveyEntry 3 }
|
|
|
|
statusMeshSurveyPhy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio name of the mesh path"
|
|
::= { statusMeshSurveyEntry 4 }
|
|
|
|
statusMeshSurveyMetric OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Total cost of the mesh path"
|
|
::= { statusMeshSurveyEntry 5 }
|
|
|
|
statusMeshSurveyDiscoveryTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Current discovery timeout for the mesh path"
|
|
::= { statusMeshSurveyEntry 6 }
|
|
|
|
statusMeshSurveyDiscoveryRetries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The number of discovery retries"
|
|
::= { statusMeshSurveyEntry 7 }
|
|
|
|
statusMeshSurveyStateActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "State Active: a value of true(1) indicates that the mesh path can be used for forwording"
|
|
::= { statusMeshSurveyEntry 8 }
|
|
|
|
statusMeshSurveyStateResolving OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "State Resolving: a value of true(1) indicates that the discovery process for the mesh
|
|
path is running"
|
|
::= { statusMeshSurveyEntry 9 }
|
|
|
|
statusMeshSurveyStateDSNValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "State DSN Valid: a value of true(1) indicates that the mesh path contains a valid
|
|
destination sequence number"
|
|
::= { statusMeshSurveyEntry 10 }
|
|
|
|
statusMeshSurveyStateFixed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "State Fixed: a value of true(1) indicates that the status of the mesh path is fixed"
|
|
::= { statusMeshSurveyEntry 11 }
|
|
|
|
statusMeshSurveyStateResolved OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "State Resolved: a value of true(1) indicates that the discovery process ends successfully"
|
|
::= { statusMeshSurveyEntry 12 }
|
|
|
|
statusMeshSurveyMeshId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Mesh ID string of the mesh path"
|
|
::= { statusMeshSurveyEntry 13 }
|
|
|
|
statusMeshSurveyWlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wlan index of the mesh path"
|
|
::= { statusMeshSurveyEntry 14 }
|
|
|
|
statusPhyCellTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StatusPhyCellEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information about cellular adapters.
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { networkStatus 12 }
|
|
|
|
statusPhyCellEntry OBJECT-TYPE
|
|
SYNTAX StatusPhyCellEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a cellular adapter
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
INDEX { statusPhyCellIndex }
|
|
::= { statusPhyCellTable 1 }
|
|
|
|
-- Elements in the cellular cards status table
|
|
|
|
-- Registration status according to 3GPP TS 27.007
|
|
CellAttachMode ::= INTEGER {
|
|
reg-hung(0), reg-home(1), reg-searching(2), reg-denied(3),
|
|
reg-noCell(4), reg-roaming(5), reg-homeSMS(6), reg-roamingSMS(7),
|
|
reg-emgOnly(8), reg-homeNoCSFB(9), reg-roamingNoCSFB(10) }
|
|
|
|
-- Access Technology according to 3GPP TS 27.007
|
|
CellAccessTech ::= INTEGER {
|
|
at-gsm(0), at-gsmCompact(1), at-UTRAN(2), at-EGPRS(3), at-HSDPA(4),
|
|
at-HSUPA(5), at-HSPA(6), at-EUTRAN(7), at-GSM-IoT(8), at-EUTRAN-NB-S1(9) }
|
|
|
|
StatusPhyCellEntry ::=
|
|
SEQUENCE {
|
|
statusPhyCellIndex INTEGER
|
|
,statusPhyCellLabel DisplayString
|
|
,statusPhyCellFriendlyName OCTET STRING
|
|
,statusPhyCellEnable DisableEnable
|
|
,statusPhyCellIMEI DisplayString
|
|
,statusPhyCellModel DisplayString
|
|
,statusPhyCellName NetifName
|
|
,statusPhyCellSimSelected INTEGER
|
|
,statusPhyCellSimState DisplayString
|
|
,statusPhyCellSimIMSI DisplayString
|
|
,statusPhyCellAttachMode CellAttachMode
|
|
,statusPhyCellOperator DisplayString
|
|
,statusPhyCellMcc INTEGER
|
|
,statusPhyCellMnc INTEGER
|
|
,statusPhyCellBaseLAC INTEGER
|
|
,statusPhyCellBaseCID INTEGER
|
|
,statusPhyCellRegistrationClass DisplayString -- gsm or cdma
|
|
,statusPhyCellAccessTech CellAccessTech
|
|
,statusPhyCellBandName DisplayString
|
|
,statusPhyCellARFCN INTEGER
|
|
,statusPhyCellRSSI INTEGER
|
|
,statusPhyCellBER INTEGER
|
|
}
|
|
|
|
statusPhyCellIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Cellular adapter index
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 1 }
|
|
|
|
statusPhyCellLabel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The label physically identifying the antennas set on the device
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 2 }
|
|
|
|
statusPhyCellFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Friendly name for this cellular adapter
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 3 }
|
|
|
|
statusPhyCellEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Administrative state
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 4 }
|
|
|
|
statusPhyCellIMEI OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Adapter IMEI
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 5 }
|
|
|
|
statusPhyCellModel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Manufacturer adapter ID
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 6 }
|
|
|
|
statusPhyCellName OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic identifier for the adapter
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 7 }
|
|
|
|
statusPhyCellSimSelected OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "SIM card currently in use (1 or 2, 0=unknown)
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 8 }
|
|
|
|
statusPhyCellSimState OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "SIM state, see 3GPP TS27.007 +CPIN
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 9 }
|
|
|
|
statusPhyCellSimIMSI OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Subscriber identity (IMSI)
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 10 }
|
|
|
|
statusPhyCellAttachMode OBJECT-TYPE
|
|
SYNTAX CellAttachMode MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Network registration state, see 3GPP TS27.007 +CREG
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 11 }
|
|
|
|
statusPhyCellOperator OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Telecom operator name
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 12 }
|
|
|
|
statusPhyCellMcc OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Mobile Country Code
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 13 }
|
|
|
|
statusPhyCellMnc OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Mobile Network (Operator) Code
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 14 }
|
|
|
|
statusPhyCellBaseLAC OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Location Area Code
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 15 }
|
|
|
|
statusPhyCellBaseCID OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Cell ID
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 16 }
|
|
|
|
statusPhyCellRegistrationClass OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Registration class (gsm, cdma)
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 17 }
|
|
|
|
statusPhyCellAccessTech OBJECT-TYPE
|
|
SYNTAX CellAccessTech MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Access Technology, see 3GPP TS27.007 +CREG
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 18 }
|
|
|
|
statusPhyCellBandName OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radio band
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 19 }
|
|
|
|
statusPhyCellARFCN OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Channel (ARFCN)
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 20 }
|
|
|
|
statusPhyCellRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Signal quality (RSSI)
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 21 }
|
|
|
|
statusPhyCellBER OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Bit Error Rate Estimator (see 3GPP TS45.008)
|
|
[FW:E2148.AC.1:3.16.1.1]"
|
|
::= { statusPhyCellEntry 22 }
|
|
|
|
statusRoaming OBJECT IDENTIFIER ::= { networkStatus 13 }
|
|
|
|
statusRoamingLeaveLvlMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "When current AP's signal level is above this value, roaming will occur when possible.
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoaming 1 }
|
|
|
|
statusRoamingLeaveLvlMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "When current AP's signal level is below this value, roaming will occur when possible.
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoaming 2 }
|
|
|
|
statusRoamingRoamLvlMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "When the signal level of an AP in scan result is above this value, it will not be considered as a candidate.
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoaming 3 }
|
|
|
|
statusRoamingRoamLvlMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "When the signal level of an AP in scan result is below this value, it will not be considered as a candidate.
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoaming 4 }
|
|
|
|
statusRoamingThresHyst OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The hysteresis applied in all thresholds
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoaming 5 }
|
|
|
|
statusRoamingLeaveBoost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Roaming occurs only if the candidate signal level is above the current AP's plus this value.
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoaming 6 }
|
|
|
|
statusRoamingActiveIf OBJECT IDENTIFIER ::= { statusRoaming 7 }
|
|
|
|
statusRoamingActiveIfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Name of active roaming interface
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingActiveIf 1 }
|
|
|
|
statusRoamingActiveIfBssid OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "BSSID of active roaming interface
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingActiveIf 2 }
|
|
|
|
statusRoamingActiveIfBeaconSignalAvg OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Signal level average in dBm of the last few beacons received
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingActiveIf 3 }
|
|
|
|
statusRoamingActiveIfNoise OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Noise level of active roaming interface
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingActiveIf 4 }
|
|
|
|
statusRoamingActiveIfSwitching OBJECT-TYPE
|
|
SYNTAX INTEGER { false(1), true(2) }
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "If roaming interface is switching
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingActiveIf 5 }
|
|
|
|
statusRoamingActiveIfChannel OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wlan channel (frequency span index):
|
|
-1 channel indicates that the product is searching for a channel
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { statusRoamingActiveIf 6 }
|
|
|
|
statusRoamingActiveIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-connected(0)
|
|
,connected(9)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Connection state
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { statusRoamingActiveIf 7 }
|
|
|
|
statusRoamingPassiveIf OBJECT IDENTIFIER ::= { statusRoaming 8 }
|
|
|
|
statusRoamingPassiveIfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Name of passive roaming interface
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingPassiveIf 1 }
|
|
|
|
statusRoamingPassiveIfBssid OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "BSSID of passive roaming interface
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingPassiveIf 2 }
|
|
|
|
statusRoamingPassiveIfBeaconSignalAvg OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Signal level average in dBm of the last few beacons received
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingPassiveIf 3 }
|
|
|
|
statusRoamingPassiveIfNoise OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Noise level of passive roaming interface
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingPassiveIf 4 }
|
|
|
|
statusRoamingPassiveIfSwitching OBJECT-TYPE
|
|
SYNTAX INTEGER { false(1), true(2) }
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "If roaming interface is switching
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { statusRoamingPassiveIf 5 }
|
|
|
|
statusRoamingPassiveIfChannel OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Wlan channel (frequency span index):
|
|
-1 channel indicates that the product is searching for a channel
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { statusRoamingPassiveIf 6 }
|
|
|
|
statusRoamingPassiveIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-connected(0)
|
|
,connected(9)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Connection state
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { statusRoamingPassiveIf 7 }
|
|
|
|
statusRoamingUrgent OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-only STATUS current DESCRIPTION
|
|
"PLH algorithm 'Urgent' indication.
|
|
Disable: normal condition.
|
|
Enable: the current AP is below the urgent level, and there is
|
|
no candidate AP complying with the candidate selection rules.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { statusRoaming 9 }
|
|
|
|
-- =========================================
|
|
-- networkConfiguration (config files state)
|
|
--
|
|
tcpip OBJECT IDENTIFIER ::= { networkConfiguration 1 }
|
|
netphy OBJECT IDENTIFIER ::= { networkConfiguration 2 }
|
|
netif OBJECT IDENTIFIER ::= { networkConfiguration 3 }
|
|
roaming OBJECT IDENTIFIER ::= { networkConfiguration 4 }
|
|
netdetails OBJECT IDENTIFIER ::= { netif 1 }
|
|
|
|
-- Tables - radio devices configuration {
|
|
|
|
configPhyWifiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigPhyWifiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of Wi-Fi radio devices
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netphy 1 }
|
|
|
|
configPhyWifiEntry OBJECT-TYPE
|
|
SYNTAX ConfigPhyWifiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a Wi-Fi service set
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configPhyWifiName } -- radio0, radio1
|
|
::= { configPhyWifiTable 1 }
|
|
|
|
-- Elements in the radio cards config table
|
|
|
|
ConfigPhyWifiEntry ::=
|
|
SEQUENCE {
|
|
configPhyWifiName NetifName
|
|
,configPhyWifiLabel DisplayString
|
|
,configPhyWifiMAC PhysAddress
|
|
,configPhyWifiEnable DisableEnable
|
|
,configPhyWifiMode WifiFlavor
|
|
,configPhyWifiCountry OCTET STRING
|
|
,configPhyWifiChannel INTEGER
|
|
,configPhyWifiHTMode INTEGER
|
|
,configPhyWifiTxPowerDBM INTEGER
|
|
,configPhyWifiDistance INTEGER
|
|
,configPhyWifiClusterMode OCTET STRING
|
|
,configPhyWifiClusterList OCTET STRING
|
|
,configPhyWifiClusterArgs OCTET STRING
|
|
,configPhyWifiAntennaPorts INTEGER
|
|
,configPhyWifiABGBasicRates OCTET STRING
|
|
,configPhyWifiABGSupportedRates OCTET STRING
|
|
,configPhyWifiChannelList OCTET STRING
|
|
,configPhyWifiWids INTEGER
|
|
}
|
|
-- { configPhyWifiEntry 1 } never used
|
|
|
|
configPhyWifiName OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic identifier for the radio device"
|
|
::= { configPhyWifiEntry 2 }
|
|
|
|
configPhyWifiLabel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The label physically identifying the antennas set on the device
|
|
[phywifi]"
|
|
::= { configPhyWifiEntry 3 }
|
|
|
|
configPhyWifiMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "MAC address of the radio device"
|
|
::= { configPhyWifiEntry 4 }
|
|
|
|
configPhyWifiEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Configured state"
|
|
::= { configPhyWifiEntry 5 }
|
|
|
|
configPhyWifiMode OBJECT-TYPE
|
|
SYNTAX WifiFlavor
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Configured 802.11 flavor.
|
|
-1 indicates invalid value."
|
|
::= { configPhyWifiEntry 6 }
|
|
|
|
configPhyWifiCountry OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..5))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Country for regulatory checks on channel/power"
|
|
::= { configPhyWifiEntry 7 }
|
|
|
|
configPhyWifiChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Configured radio channel (frequency span index)
|
|
A value of 0 indicates that your radio device is configured on multiple channels or automatic channel select.
|
|
See configPhyWifiChannelList for more channel details.
|
|
Ignored in client roaming mode, see configIfStaScanChannels instead."
|
|
::= { configPhyWifiEntry 8 }
|
|
|
|
configPhyWifiHTMode OBJECT-TYPE
|
|
SYNTAX INTEGER {ht20(1),ht40-below(2),ht40-above(3),ht40-auto(4),vht20(5),vht40(6),vht80(7)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "802.11n channel width. Double (40) width is
|
|
subject to automatic availability checking before use."
|
|
::= { configPhyWifiEntry 9 }
|
|
|
|
configPhyWifiTxPowerDBM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Configured radio transmit power limit in dBm.
|
|
To transmit with the maximum allowed power, use
|
|
value '-1'."
|
|
::= { configPhyWifiEntry 10 }
|
|
|
|
configPhyWifiDistance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Configured maximum distance between AP and stations (meters)"
|
|
::= { configPhyWifiEntry 11 }
|
|
|
|
configPhyWifiClusterMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..16))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Cluster mode, empty for none, 'dualscan' for data/scan separation"
|
|
::= { configPhyWifiEntry 12 }
|
|
|
|
configPhyWifiClusterList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "List of device names in the cluster, e.g. 'radio0 radio1'"
|
|
::= { configPhyWifiEntry 13 }
|
|
|
|
configPhyWifiClusterArgs OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Cluster params for this device. For 'dualscan' mode,
|
|
one device must be set to 'scan',
|
|
the others in the cluster must be set to 'data'."
|
|
::= { configPhyWifiEntry 14 }
|
|
|
|
configPhyWifiAntennaPorts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
port1(1)
|
|
,ports12(3)
|
|
,ports123(7)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Antenna port configuration."
|
|
::= { configPhyWifiEntry 15 }
|
|
|
|
configPhyWifiABGBasicRates OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4..66))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Space separated list of basic rates (in kbps).
|
|
A value of 0 indicates that your radio device is configured on automatic basic rate."
|
|
::= { configPhyWifiEntry 16 }
|
|
|
|
configPhyWifiABGSupportedRates OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4..66))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Space separated list of supported rates (in kbps).
|
|
A value of 0 indicates that your radio device is configured on automatic supported rate."
|
|
::= { configPhyWifiEntry 17 }
|
|
|
|
configPhyWifiChannelList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Configured radio channel list:
|
|
Display/enter one or several channels, separated by spaces.
|
|
'auto' or '0' indicates automatic channel select.
|
|
Ignored in client roaming mode, see configIfStaScanChannels instead."
|
|
::= { configPhyWifiEntry 18 }
|
|
|
|
configPhyWifiWids OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WIDS functions selection.
|
|
0: radio is not reserved for WIDS (default).
|
|
1: radio is reserved for rogue AP monitoring.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { configPhyWifiEntry 19 }
|
|
|
|
configPhyCellTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigPhyCellEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of Cellular radio devices
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { netphy 2 }
|
|
|
|
configPhyCellEntry OBJECT-TYPE
|
|
SYNTAX ConfigPhyCellEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a cellular radio device"
|
|
INDEX { configPhyCellName } -- wwan0, wwan1: uciname
|
|
::= { configPhyCellTable 1 }
|
|
|
|
-- Elements in the radio cards config table
|
|
|
|
ConfigPhyCellEntry ::= SEQUENCE {
|
|
configPhyCellName NetifName
|
|
,configPhyCellLabel DisplayString
|
|
,configPhyCellDisableAtBoot DisableEnable
|
|
,configPhyCellLogAT DisableEnable
|
|
,configPhyCellSIM INTEGER
|
|
,configPhyCellSetPIN DisplayString
|
|
,configPhyCellSetPUK DisplayString
|
|
,configPhyCellSetPINStatus AsyncSetStatus
|
|
,configPhyCellSim1Pin DisplayString
|
|
,configPhyCellSim1Apn DisplayString
|
|
,configPhyCellSim1Authentication CellSecurityProtocol
|
|
,configPhyCellSim1Identity DisplayString
|
|
,configPhyCellSim1Password DisplayString
|
|
,configPhyCellSim2Pin DisplayString
|
|
,configPhyCellSim2Apn DisplayString
|
|
,configPhyCellSim2Authentication CellSecurityProtocol
|
|
,configPhyCellSim2Identity DisplayString
|
|
,configPhyCellSim2Password DisplayString
|
|
}
|
|
|
|
configPhyCellName OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic identifier for the radio device"
|
|
::= { configPhyCellEntry 1 }
|
|
|
|
configPhyCellLabel OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "The label physically identifying the
|
|
plugs/indicators on the device box
|
|
[PF:wwan:0]"
|
|
::= { configPhyCellEntry 2 }
|
|
|
|
configPhyCellDisableAtBoot OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Set the card to be forcibly disabled at boot time.
|
|
If set to Enable, the associated network will be
|
|
initially disabled after reboots.
|
|
If set to Disable, the associated network will obey
|
|
its existing configuration."
|
|
::= { configPhyCellEntry 3 }
|
|
|
|
configPhyCellLogAT OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable logging of internal AT commands/responses"
|
|
::= { configPhyCellEntry 4 }
|
|
|
|
configPhyCellSIM OBJECT-TYPE
|
|
SYNTAX INTEGER { sim1(1), sim2(2) }
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Default SIM/UICC activated at startup
|
|
(for Dual SIM Single Standby radios)"
|
|
::= { configPhyCellEntry 5 }
|
|
|
|
configPhyCellSetPIN OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Not implemented. New PIN code value
|
|
to set in the *currently selected* SIM card.
|
|
Reading this OID returns nothing.
|
|
WARNING 1: the corresponding configPhyCellSim(1/2)Pin
|
|
OID will retain its previous value; you must set it
|
|
separately to its new value in order to use that SIM
|
|
WARNING 2: this field is volatile and used either
|
|
immediately or just after setting the PUK, as required"
|
|
::= { configPhyCellEntry 6 }
|
|
|
|
configPhyCellSetPUK OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Not implemented. PUK code required to reset
|
|
the PIN code of the *currently selected* SIM card to
|
|
the value of configPhyCellSetPIN.
|
|
Use this only if the SIM is locked after an excessive
|
|
number of PIN code errors
|
|
Reading this OID returns nothing.
|
|
WARNING: this field is volatile and used immediately,
|
|
then cleared out"
|
|
::= { configPhyCellEntry 7 }
|
|
|
|
configPhyCellSetPINStatus OBJECT-TYPE
|
|
SYNTAX AsyncSetStatus MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Not implemented.
|
|
Status of a write operation to configPhyCellSetPIN /
|
|
configPhyCellSetPUK.
|
|
set-init: no operation was requested yet
|
|
set-more: more data (PUK code) needed
|
|
set-wait: operation in progress
|
|
set-ok: operation finished and succeeded
|
|
set-fail: operation finished and failed"
|
|
::= { configPhyCellEntry 8 }
|
|
|
|
configPhyCellSim1Pin OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "PIN code required to enable the SIM card"
|
|
::= { configPhyCellEntry 9 }
|
|
|
|
configPhyCellSim1Apn OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "APN - Name of the cellular sub-service
|
|
for IP. If left empty, the default subscriber's
|
|
APN will be used"
|
|
::= { configPhyCellEntry 10 }
|
|
|
|
configPhyCellSim1Authentication OBJECT-TYPE
|
|
SYNTAX CellSecurityProtocol MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Authentication type towards the Telecom network"
|
|
::= { configPhyCellEntry 11 }
|
|
|
|
configPhyCellSim1Identity OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "User name for PAP/CHAP authentication"
|
|
::= { configPhyCellEntry 12 }
|
|
|
|
configPhyCellSim1Password OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "User password for PAP/CHAP authentication"
|
|
::= { configPhyCellEntry 13 }
|
|
|
|
configPhyCellSim2Pin OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "PIN code required to enable the SIM card"
|
|
::= { configPhyCellEntry 14 }
|
|
|
|
configPhyCellSim2Apn OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "APN - Name of the cellular sub-service
|
|
for IP. If left empty, the default subscriber's
|
|
APN will be used"
|
|
::= { configPhyCellEntry 15 }
|
|
|
|
configPhyCellSim2Authentication OBJECT-TYPE
|
|
SYNTAX CellSecurityProtocol MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Authentication type towards the Telecom network"
|
|
::= { configPhyCellEntry 16 }
|
|
|
|
configPhyCellSim2Identity OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "User name for PAP/CHAP authentication"
|
|
::= { configPhyCellEntry 17 }
|
|
|
|
configPhyCellSim2Password OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "User password for PAP/CHAP authentication"
|
|
::= { configPhyCellEntry 18 }
|
|
|
|
-- Tables - radio devices configuration }
|
|
|
|
-- Table - Radius servers {
|
|
|
|
configRadiusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigRadiusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of radius servers currently defined
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netdetails 1 }
|
|
|
|
configRadiusEntry OBJECT-TYPE
|
|
SYNTAX ConfigRadiusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a radius server
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configRadiusIndex } -- en nombre limité, UCI 'radius'
|
|
::= { configRadiusTable 1 }
|
|
|
|
-- Elements in the IP subnet status table
|
|
|
|
ConfigRadiusEntry ::=
|
|
SEQUENCE {
|
|
configRadiusIndex INTEGER,
|
|
configRadiusRowStatus RowStatus,
|
|
configRadiusIpAddress OCTET STRING,
|
|
configRadiusPort INTEGER,
|
|
configRadiusSecret OCTET STRING
|
|
}
|
|
|
|
configRadiusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Radius index, maximum 4 items support"
|
|
::= { configRadiusEntry 1 }
|
|
|
|
configRadiusRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configRadiusEntry 2 }
|
|
|
|
configRadiusIpAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Radius IPv4 address"
|
|
::= { configRadiusEntry 3 }
|
|
|
|
configRadiusPort OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Radius UDP port"
|
|
::= { configRadiusEntry 4 }
|
|
|
|
configRadiusSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Radius shared secret"
|
|
::= { configRadiusEntry 5 }
|
|
-- Table - Radius servers }
|
|
|
|
configDetailsNasId OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..48))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "NAS identifier for the RADIUS servers
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netdetails 2 }
|
|
|
|
-- Table FilterGroup {
|
|
configFilterGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigFilterGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of filter group.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netdetails 3 }
|
|
|
|
configFilterGroupEntry OBJECT-TYPE
|
|
SYNTAX ConfigFilterGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a filter group
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configFilterGroupIndex }
|
|
::= { configFilterGroupTable 1 }
|
|
|
|
-- Elements in the filter group table
|
|
|
|
ConfigFilterGroupEntry ::=
|
|
SEQUENCE {
|
|
configFilterGroupIndex OCTET STRING
|
|
,configFilterGroupRowStatus RowStatus
|
|
,configFilterGroupFriendlyName OCTET STRING
|
|
}
|
|
|
|
configFilterGroupIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "filter group index"
|
|
::= { configFilterGroupEntry 1 }
|
|
|
|
configFilterGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[PF:fgroup_:1]"
|
|
::= { configFilterGroupEntry 2 }
|
|
|
|
configFilterGroupFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Filter group friendly name (as displayed in the web UI)"
|
|
::= { configFilterGroupEntry 3 }
|
|
|
|
-- Table FilterGroup }
|
|
|
|
-- Table FilterGroupRule {
|
|
configFilterGroupRuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigFilterGroupRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of filter group rules.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netdetails 4 }
|
|
|
|
configFilterGroupRuleEntry OBJECT-TYPE
|
|
SYNTAX ConfigFilterGroupRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a filter rule
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configFilterGroupRuleIndex }
|
|
::= { configFilterGroupRuleTable 1 }
|
|
|
|
-- Elements in the filter group rule table
|
|
|
|
ConfigFilterGroupRuleEntry ::=
|
|
SEQUENCE {
|
|
configFilterGroupRuleIndex OCTET STRING
|
|
,configFilterGroupRuleRowStatus RowStatus
|
|
,configFilterGroupGroupIndex OCTET STRING
|
|
,configFilterGroupRuleMACFrameType INTEGER
|
|
,configFilterGroupRuleCheckMAC INTEGER
|
|
,configFilterGroupRuleNetworkProtocol INTEGER
|
|
,configFilterGroupRuleIpAddress IpAddress
|
|
,configFilterGroupRuleNetmask IpAddress
|
|
,configFilterGroupRuleCheckIP INTEGER
|
|
,configFilterGroupRuleTransportProtocol INTEGER
|
|
,configFilterGroupRuleFirstPort INTEGER
|
|
,configFilterGroupRuleLastPort INTEGER
|
|
,configFilterGroupRuleCheckPort INTEGER
|
|
}
|
|
|
|
configFilterGroupRuleIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "filter group rule index"
|
|
::= { configFilterGroupRuleEntry 1 }
|
|
|
|
configFilterGroupRuleRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[PF:frule_:1]"
|
|
::= { configFilterGroupRuleEntry 2 }
|
|
|
|
configFilterGroupGroupIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Filter group to which the rule belongs to"
|
|
::= { configFilterGroupRuleEntry 3 }
|
|
|
|
configFilterGroupRuleMACFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nofilter(1)
|
|
,unicast(2)
|
|
,broadcast(3)
|
|
,multicast(4)
|
|
,invalid(-255)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Type of frame"
|
|
::= { configFilterGroupRuleEntry 4 }
|
|
|
|
configFilterGroupRuleCheckMAC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source(1)
|
|
,destination(2)
|
|
,invalid(-255)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "frame MAC field to check"
|
|
::= { configFilterGroupRuleEntry 5 }
|
|
|
|
configFilterGroupRuleNetworkProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nofilter(-1)
|
|
,ip(-2)
|
|
,arp(-3)
|
|
,invalid(-255)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Network protocol. nofilter(-1), IP(-2), ARP(-3), (>0) for
|
|
custom protocol. IP and ARP are shortcuts for 2048 (0x800) and
|
|
2054 (0x806)
|
|
-255: invalid value"
|
|
::= { configFilterGroupRuleEntry 6 }
|
|
|
|
configFilterGroupRuleIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Group rule filter IP address."
|
|
::= { configFilterGroupRuleEntry 7 }
|
|
|
|
configFilterGroupRuleNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Group rule filter netmask."
|
|
::= { configFilterGroupRuleEntry 8 }
|
|
|
|
configFilterGroupRuleCheckIP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source(1)
|
|
,destination(2)
|
|
,invalid(-255)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IP frame field to check"
|
|
::= { configFilterGroupRuleEntry 9 }
|
|
|
|
configFilterGroupRuleTransportProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nofilter(1)
|
|
,udp(2)
|
|
,tcp(3)
|
|
,icmp(4)
|
|
,invalid(-255)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Type of transport protocol"
|
|
::= { configFilterGroupRuleEntry 10 }
|
|
|
|
configFilterGroupRuleFirstPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Lower bound of port selection
|
|
-255: invalid value"
|
|
::= { configFilterGroupRuleEntry 11 }
|
|
|
|
configFilterGroupRuleLastPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Upper bound of port selection
|
|
-255: invalid value"
|
|
::= { configFilterGroupRuleEntry 12 }
|
|
|
|
configFilterGroupRuleCheckPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source(1),
|
|
destination(2),
|
|
invalid(-255)
|
|
} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Transport field to check"
|
|
::= { configFilterGroupRuleEntry 13 }
|
|
|
|
-- Table FilterGroupRule }
|
|
|
|
-- Table - Network interfaces {
|
|
|
|
configInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigInterfaceEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of network interfaces currently defined. The interfaces are defined by firmware.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netif 2 }
|
|
|
|
configInterfaceEntry OBJECT-TYPE
|
|
SYNTAX ConfigInterfaceEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about a network interface
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configInterfaceName }
|
|
::= { configInterfaceTable 1 }
|
|
|
|
-- Elements in the IP subnet status table
|
|
|
|
ConfigInterfaceEntry ::=
|
|
SEQUENCE {
|
|
configInterfaceName NetifName, -- br-lan, wlanX, ethX.Y...
|
|
configInterfaceRowStatus RowStatus,
|
|
configInterfaceType INTEGER,
|
|
configInterfaceDepends NetifName,
|
|
configInterfaceOutputFilterGroup OCTET STRING,
|
|
configInterfaceFilterGroupDir INTEGER,
|
|
configInterfaceInputFilterGroup OCTET STRING
|
|
}
|
|
|
|
configInterfaceName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the interface.
|
|
Referenced in masters and slave interfaces."
|
|
::= { configInterfaceEntry 1 }
|
|
|
|
configInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[MAX-ACCESS:read-only]"
|
|
::= { configInterfaceEntry 2 }
|
|
|
|
configInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet(1) ,mac-bridge(2) ,wifi-sta(3)
|
|
,wifi-ap(4) ,wifi-11s(5) ,wifi-rept(6)
|
|
,wifi-adhoc(7) ,vlan8021q(8), l2tunnel-gre(9)
|
|
,wifi-srcc(10), cellular(11), mac-bond(12)
|
|
,wifi-monitor(13)
|
|
-- ,vpn(14)
|
|
}
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Interface type: eth, AP, wifi client..."
|
|
::= { configInterfaceEntry 3 }
|
|
|
|
configInterfaceDepends OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The master interface this interface belongs to.
|
|
Only the bridge type interface can be displayed and configured here.
|
|
For the ipSubnet type interface which this interface depends to, please see configIpSubnetTable.
|
|
This OID is not yet available for L2 GRE tunnel mode."
|
|
::= { configInterfaceEntry 4 }
|
|
|
|
configInterfaceOutputFilterGroup OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The output filter group this interface belongs to.
|
|
Please refer to configFilterGroupTable and configFilterGroupRuleTable in order to check or change filter group in this interface.
|
|
The filter is used only if this interface is bridged.
|
|
"
|
|
::= { configInterfaceEntry 5 }
|
|
|
|
configInterfaceFilterGroupDir OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
in(1),
|
|
out(2),
|
|
inout(3)
|
|
}
|
|
MAX-ACCESS read-write STATUS obsolete
|
|
DESCRIPTION "The filter group traffic direction.
|
|
Attention: This OID is obsolete."
|
|
::= { configInterfaceEntry 6 }
|
|
|
|
configInterfaceInputFilterGroup OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The input filter group this interface belongs to.
|
|
Please refer to configFilterGroupTable and configFilterGroupRuleTable in order to check or change filter group in this interface.
|
|
The filter is used only if this interface is bridged.
|
|
[FW:E2148.AC.1:3.12.9.1]
|
|
"
|
|
::= { configInterfaceEntry 7 }
|
|
|
|
-- Table - Network interfaces }
|
|
|
|
-- Table - Ethernet ports {
|
|
--
|
|
--configEthernetTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF ConfigEthernetEntry
|
|
-- MAX-ACCESS not-accessible STATUS current
|
|
-- DESCRIPTION "List of Ethernets interfaces"
|
|
-- ::= { netif 6 }
|
|
--
|
|
--configEthernetEntry OBJECT-TYPE
|
|
-- SYNTAX ConfigEthernetEntry
|
|
-- MAX-ACCESS not-accessible STATUS current
|
|
-- DESCRIPTION "Details about an Ethernet network interface"
|
|
-- INDEX { configEthernetName }
|
|
-- ::= { configEthernetTable 1 }
|
|
--
|
|
-- Elements in the IP subnet status table
|
|
--
|
|
-- ConfigEthernetEntry ::=
|
|
-- SEQUENCE {
|
|
-- ,configEthernetName NetifName - - eth0
|
|
-- ,configEthernetLabel OCTET STRING
|
|
--,configEthernetVlan OCTET STRING - - futur: ingress tagging
|
|
-- }
|
|
--
|
|
-- configEthernetName OBJECT-TYPE
|
|
-- SYNTAX NetifName
|
|
-- MAX-ACCESS read-only STATUS current
|
|
-- DESCRIPTION "Symbolic name of the Ethernet port.
|
|
-- Referred to in the general Interfaces table."
|
|
-- ::= { configEthernetEntry 1 }
|
|
--
|
|
-- configEthernetLabel OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only STATUS current
|
|
-- DESCRIPTION "The label physically identifying the port on the device"
|
|
-- ::= { configEthernetEntry 2 }
|
|
-- Table - Ethernet ports }
|
|
|
|
-- Tables - Wi-Fi clients {
|
|
|
|
configIfStaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIfStaEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of Wi-Fi client connections currently defined
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netif 3 }
|
|
|
|
configIfStaEntry OBJECT-TYPE
|
|
SYNTAX ConfigIfStaEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about a Wi-Fi service set
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIfStaName }
|
|
::= { configIfStaTable 1 }
|
|
|
|
-- Wlan elements when in STA mode
|
|
|
|
ConfigIfStaEntry ::=
|
|
SEQUENCE {
|
|
configIfStaName NetifName -- phy0wl0
|
|
,configIfStaRowStatus RowStatus
|
|
,configIfStaPhy NetifName
|
|
|
|
,configIfStaSsid OCTET STRING
|
|
,configIfStaBssid PhysAddress
|
|
,configIfStaBridgingMode INTEGER
|
|
|
|
-- == roaming info == --
|
|
,configIfStaScanChannels OCTET STRING
|
|
,configIfStaScanPassive INTEGER
|
|
,configIfStaRoamingEnable DisableEnable
|
|
,configIfStaRoamingEnableDBM INTEGER
|
|
,configIfStaRoamingRequiredBoost INTEGER
|
|
,configIfStaRoamingScanPeriod INTEGER
|
|
|
|
-- == security info (Part 1) == --
|
|
,configIfStaSecurityMode INTEGER
|
|
,configIfStaWepKey1 WepKeys
|
|
,configIfStaWepKey2 WepKeys
|
|
,configIfStaWepKey3 WepKeys
|
|
,configIfStaWepKey4 WepKeys
|
|
,configIfStaWepKey INTEGER
|
|
,configIfStaWpaVersion WpaVersions
|
|
,configIfStaWpaCipher CipherTypes
|
|
,configIfStaIdentity OCTET STRING
|
|
,configIfStaKey OCTET STRING
|
|
,configIfStaPrivateKey OCTET STRING
|
|
,configIfStaCACert OCTET STRING
|
|
,configIfStaEapType INTEGER
|
|
,configIfStaAuthentication PeapSecurityProtocol
|
|
,configIfStaFastBSSTransitionActivated DisableEnable
|
|
,configIfStaIgnorePreviousScansResults DisableEnable
|
|
,configIfStaRoamingRssiSmoothingFactor INTEGER
|
|
,configIfStaRoamingBeaconTimeout INTEGER
|
|
,configIfStaWpaKeyCacheLifetime INTEGER
|
|
|
|
-- == advanced roaming == --
|
|
,configIfStaRoamingCurrentApScanThreshold INTEGER
|
|
,configIfStaRoamingMinimumStaLevel INTEGER
|
|
,configIfStaRoamingAboveLevelThreshold INTEGER
|
|
,configIfStaRoamingMaxSignalLevel INTEGER
|
|
,configIfStaRoamingMinRoamDelay INTEGER
|
|
,configIfStaRoamingNoReturnDelay INTEGER
|
|
,configIfStaRoamingThresholdHysteresis INTEGER
|
|
,configIfStaRoamingOffChanMaxDelay INTEGER
|
|
,configIfStaRoamingOffChanProbeDelay INTEGER
|
|
,configIfStaRoamingPerChanProbeDelay INTEGER
|
|
|
|
-- == security info (Part 2) == --
|
|
,configIfStaUserCert OCTET STRING
|
|
|
|
-- == advanced info == --
|
|
,configIfStaDeauthBeforeRoamingtoNextAP DisableEnable
|
|
|
|
}
|
|
|
|
configIfStaName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the wlan.
|
|
Referred to in the general Interfaces table."
|
|
::= { configIfStaEntry 1 }
|
|
|
|
configIfStaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[radio]"
|
|
::= { configIfStaEntry 2 }
|
|
|
|
configIfStaPhy OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "PHY index for this wlan"
|
|
::= { configIfStaEntry 3 }
|
|
|
|
configIfStaSsid OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "SSID string"
|
|
::= { configIfStaEntry 4 }
|
|
|
|
configIfStaBssid OBJECT-TYPE
|
|
SYNTAX PhysAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Not implemented yet
|
|
[MAX-ACCESS:read-only]"
|
|
::= { configIfStaEntry 5 }
|
|
|
|
configIfStaBridgingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
arpnat(1)
|
|
,four-addresses(2)
|
|
,mono-eth-cloning(3)
|
|
,mono-profinet-clonning(4)
|
|
,multi-eth-cloning(5)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Bridging mode."
|
|
::= { configIfStaEntry 6 }
|
|
|
|
configIfStaScanChannels OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "List of radio frequencies (in MHz) scanned for the next AP discovery:
|
|
Ignored if roaming is disabled.
|
|
"
|
|
::= { configIfStaEntry 7 }
|
|
|
|
configIfStaScanPassive OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Not implemented yet
|
|
[MAX-ACCESS:read-only]"
|
|
::= { configIfStaEntry 8 }
|
|
|
|
configIfStaRoamingEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Global fast-handover/roaming function activation"
|
|
::= { configIfStaEntry 9 }
|
|
|
|
configIfStaRoamingEnableDBM OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Roaming is allowed when current AP signal
|
|
drops below this level (negative value, e.g. -60)"
|
|
::= { configIfStaEntry 10 }
|
|
|
|
configIfStaRoamingRequiredBoost OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Roaming occurs only if the candidate signal
|
|
level is above the current AP's plus this value"
|
|
::= { configIfStaEntry 11 }
|
|
|
|
configIfStaRoamingScanPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Background scan period when roaming is enabled"
|
|
::= { configIfStaEntry 12 }
|
|
|
|
configIfStaSecurityMode OBJECT-TYPE
|
|
SYNTAX SecurityModes
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Security policy"
|
|
::= { configIfStaEntry 13 }
|
|
|
|
configIfStaWepKey1 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 1 in hexadecimal format"
|
|
::= { configIfStaEntry 14 }
|
|
|
|
configIfStaWepKey2 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 2 in hexadecimal format"
|
|
::= { configIfStaEntry 15 }
|
|
|
|
configIfStaWepKey3 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 3 in hexadecimal format"
|
|
::= { configIfStaEntry 16 }
|
|
|
|
configIfStaWepKey4 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 4 in hexadecimal format"
|
|
::= { configIfStaEntry 17 }
|
|
|
|
configIfStaWepKey OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key slot selected: a value between 1 and 4 that indicates select one of the four WEP keys
|
|
Ignored if configIfStaSecurityMode is different than wep."
|
|
::= { configIfStaEntry 18 }
|
|
|
|
configIfStaWpaVersion OBJECT-TYPE
|
|
SYNTAX WpaVersions MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WPA version.
|
|
Ignored if configIfStaSecurityMode is different than wpa-*."
|
|
::= { configIfStaEntry 19 }
|
|
|
|
configIfStaWpaCipher OBJECT-TYPE
|
|
SYNTAX CipherTypes MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "WPA cipher:
|
|
WPA mode supports only TKIP(1).
|
|
WPA2 mode supports only AES(2).
|
|
Mixed WPA/WPA2 mode supports only AESTKIP(3).
|
|
WPA3 mode supports only AES(2).
|
|
Mixed WP2/WPA3 mode supports only AES(2).
|
|
Ignored if configIfStaSecurityMode is different than wpa-*.
|
|
[FW:E2148.AC.1:3.12.10.1]"
|
|
::= { configIfStaEntry 20 }
|
|
|
|
configIfStaIdentity OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "User ID (PEAP, TTLS)"
|
|
::= { configIfStaEntry 21 }
|
|
|
|
configIfStaKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "User password or WPA-PSK passphrase (or
|
|
WPA 64-hex key) or TLS private key password"
|
|
::= { configIfStaEntry 22 }
|
|
|
|
configIfStaPrivateKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "TLS private key.
|
|
A GET for this OID returns a string whose first
|
|
byte is '1' if the key was uploaded, else '0'"
|
|
::= { configIfStaEntry 23 }
|
|
|
|
configIfStaCACert OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "EAP certificate.
|
|
A GET for this OID returns a string whose first
|
|
byte is '1' if the key was uploaded, else '0'"
|
|
::= { configIfStaEntry 24 }
|
|
|
|
configIfStaEapType OBJECT-TYPE
|
|
SYNTAX INTEGER { eap-tls(1), eap-peap(2), eap-leap(3) }
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "EAP type; eap-peap is the same as eap-ttls"
|
|
::= { configIfStaEntry 25 }
|
|
|
|
configIfStaAuthentication OBJECT-TYPE
|
|
SYNTAX PeapSecurityProtocol
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Authentication type for phase 2"
|
|
::= { configIfStaEntry 26 }
|
|
|
|
configIfStaFastBSSTransitionActivated OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "802.11r support (dot11FastBSSTransitionActivated):
|
|
802.11r supports only client mode with all WPA/WPA2 policies."
|
|
::= { configIfStaEntry 27 }
|
|
|
|
configIfStaIgnorePreviousScansResults OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "When scanning for APs, ignore those APs found prior to the
|
|
last scan pass"
|
|
::= { configIfStaEntry 28 }
|
|
|
|
configIfStaRoamingRssiSmoothingFactor OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "RSSI smoothing factor
|
|
The RSSI of the current AP is computed over the last few beacons received.
|
|
Select the importance of the last beacon relative to older ones:
|
|
the RSSI smoothing factor is a value between 1 and 16 that indicates the step of 1/16 (e.g. 3/16, 5/16 or 16/16)
|
|
It is expressed in percentage format in WEB interface:
|
|
6%(1), 13%(2), 19%(3), 25%(4),
|
|
31%(5), 38%(6), 44%(7), 50%(8),
|
|
56%(9), 63%(10), 69%(11), 75%(12),
|
|
81%(13), 88%(14), 94%(15), 100%(16)
|
|
|
|
Default: 19%(3)
|
|
Ignored if roaming is disabled."
|
|
::= { configIfStaEntry 29 }
|
|
|
|
configIfStaRoamingBeaconTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Beacon timeout:
|
|
Value in beacon interval unit."
|
|
::= { configIfStaEntry 30 }
|
|
|
|
configIfStaWpaKeyCacheLifetime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Expressed in seconds."
|
|
::= { configIfStaEntry 31 }
|
|
|
|
configIfStaRoamingCurrentApScanThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In dBm, e.g. '-75'. Above (better than) this value, the
|
|
device will stop scanning. Set to 0 to scan unconditionally.
|
|
Incompatible with the Maximum signal level option."
|
|
::= { configIfStaEntry 32 }
|
|
|
|
configIfStaRoamingMinimumStaLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In dBm, e.g. '-75'. 0 to disable. Roaming won't occur if
|
|
the candidate signal is below this level. Association is still
|
|
possible if no other AP is available."
|
|
::= { configIfStaEntry 33 }
|
|
|
|
configIfStaRoamingAboveLevelThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In dBm, e.g. '-30'. Leave empty or 0 to disable. Roaming
|
|
will occur when the current AP signal crosses and exceeds this
|
|
value, and there is an acceptable candidate around. This allows
|
|
elimination of approaching AP antennas that will be soon overtaken."
|
|
::= { configIfStaEntry 34 }
|
|
|
|
configIfStaRoamingMaxSignalLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In dBm, e.g. '-30'. Leave empty or 0 to disable. Must be
|
|
greater or equal to the 'Excessive signal detection threshold'.
|
|
Roaming will occur whenever the current AP signal is above this
|
|
value, and there is an acceptable candidate around. When selecting
|
|
the next AP, the ones above this value are considered last."
|
|
::= { configIfStaEntry 35 }
|
|
|
|
configIfStaRoamingMinRoamDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In ms. Leave empty or 0 to disable. Roaming won't occur
|
|
before this delay has elapsed since the last association."
|
|
::= { configIfStaEntry 36 }
|
|
|
|
configIfStaRoamingNoReturnDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In ms. Leave empty or 0 to disable, max 180000 (3 mn).
|
|
Roaming won't occur to an AP that was left recently (before this
|
|
delay gos elapsed). The delay is cleared for APs that are not around
|
|
anymore."
|
|
::= { configIfStaEntry 37 }
|
|
|
|
configIfStaRoamingThresholdHysteresis OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Value in dBm, e.g. '2'. Hysteresis used for all thresholds.
|
|
This value will be added and substracted to each threshold to set
|
|
the corresponding threshold hysteresis interval."
|
|
::= { configIfStaEntry 38 }
|
|
|
|
configIfStaRoamingOffChanMaxDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In ms. Maximum delay offchannel (during which data must be
|
|
buffered by the associated AP). Channels will be scanned without
|
|
returning to the base channel, until this delay is exhausted.
|
|
This value will be trimmed to the beacon interval of the AP."
|
|
::= { configIfStaEntry 39 }
|
|
|
|
configIfStaRoamingOffChanProbeDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In ms. Delay for collision avoidance after a channel switch,
|
|
before sending the probe request."
|
|
::= { configIfStaEntry 40 }
|
|
|
|
configIfStaRoamingPerChanProbeDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "In ms. Time to wait for an answer from the access points."
|
|
::= { configIfStaEntry 41 }
|
|
|
|
configIfStaUserCert OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "EAP User certificate.
|
|
A GET for this OID returns a string whose first
|
|
byte is '1' if the key was uploaded, else '0'"
|
|
::= { configIfStaEntry 42 }
|
|
|
|
configIfStaDeauthBeforeRoamingtoNextAP OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Deauthenticate before roaming to next AP.
|
|
Write 2 (Enable), the previous AP stops transmission immediately, saving up bandwidth.
|
|
Write 1 (Disable), let more time for the AP controller to manager handover.
|
|
[FW:E2148.AC.1:3.16.0.1]"
|
|
::= { configIfStaEntry 43 }
|
|
|
|
-- Tables - Wi-Fi clients }
|
|
|
|
-- Tables - Access points {
|
|
|
|
configIfAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIfAPEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Access point services table
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netif 4 }
|
|
|
|
configIfAPEntry OBJECT-TYPE
|
|
SYNTAX ConfigIfAPEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Access point services details
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIfAPName }
|
|
::= { configIfAPTable 1 }
|
|
|
|
-- Wlan elements when in AP mode
|
|
|
|
ConfigIfAPEntry ::=
|
|
SEQUENCE {
|
|
configIfAPName NetifName -- radioXwY
|
|
,configIfAPRowStatus RowStatus
|
|
,configIfAPPhy NetifName -- radioX
|
|
|
|
,configIfAPSsid OCTET STRING
|
|
,configIfAPHidden INTEGER
|
|
,configIfAPWds INTEGER
|
|
,configIfAPIsolate INTEGER
|
|
-- dtim, beacon_int, basic_rate, supported_rate
|
|
-- mac filter
|
|
--,configIfAPBssid PhysAddress - - a ajouter plus tard
|
|
--,configIfAPChannel INTEGER - - voir radio
|
|
|
|
-- == security info == --
|
|
,configIfAPSecurityMode SecurityModes
|
|
,configIfAPWepKey1 WepKeys
|
|
,configIfAPWepKey2 WepKeys
|
|
,configIfAPWepKey3 WepKeys
|
|
,configIfAPWepKey4 WepKeys
|
|
,configIfAPWepKey INTEGER
|
|
,configIfAPWepAuthentication INTEGER
|
|
,configIfAPWpaVersion WpaVersions
|
|
,configIfAPWpaCipher CipherTypes
|
|
,configIfAPKey OCTET STRING
|
|
,configIfAPRadiusIndex INTEGER
|
|
,configIfAPPreAuthentication DisableEnable
|
|
,configIfAPMACFilterBehaviour INTEGER
|
|
,configIfAPMACFilterAddresses OCTET STRING
|
|
,configIfAPWpaGroupRekey INTEGER
|
|
,configIfAPWpaPairRekey INTEGER
|
|
,configIfAPWpaMasterRekey INTEGER
|
|
,configIfAPWpaProtectedFrame INTEGER
|
|
,configIfAPMaxSimultaneousAssoc INTEGER
|
|
|
|
-- == Passpoint == --
|
|
,configIfAPPasspointConfigName OCTET STRING
|
|
}
|
|
|
|
configIfAPName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the wlan.
|
|
Referred to in the general Interfaces table."
|
|
::= { configIfAPEntry 1 }
|
|
|
|
configIfAPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[radio]"
|
|
::= { configIfAPEntry 2 }
|
|
|
|
configIfAPPhy OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "PHY index for this wlan"
|
|
::= { configIfAPEntry 3 }
|
|
|
|
configIfAPSsid OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "SSID string"
|
|
::= { configIfAPEntry 4 }
|
|
|
|
configIfAPHidden OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Do not broadcast SSID"
|
|
::= { configIfAPEntry 5 }
|
|
|
|
configIfAPWds OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable WDS (4-addresses) stations support"
|
|
::= { configIfAPEntry 6 }
|
|
|
|
configIfAPIsolate OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Isolate clients from eachother"
|
|
::= { configIfAPEntry 7 }
|
|
|
|
configIfAPSecurityMode OBJECT-TYPE
|
|
SYNTAX SecurityModes MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Security policy"
|
|
::= { configIfAPEntry 8 }
|
|
|
|
configIfAPWepKey1 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 1 in hexadecimal format"
|
|
::= { configIfAPEntry 9 }
|
|
|
|
configIfAPWepKey2 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 2 in hexadecimal format"
|
|
::= { configIfAPEntry 10 }
|
|
|
|
configIfAPWepKey3 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 3 in hexadecimal format"
|
|
::= { configIfAPEntry 11 }
|
|
|
|
configIfAPWepKey4 OBJECT-TYPE
|
|
SYNTAX WepKeys MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key 4 in hexadecimal format"
|
|
::= { configIfAPEntry 12 }
|
|
|
|
configIfAPWepKey OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WEP key slot selected: a value between 1 and 4 that indicates select one of the four WEP keys.
|
|
Ignored if configIfAPSecurityMode is different than wep."
|
|
::= { configIfAPEntry 13 }
|
|
|
|
configIfAPWepAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { open(1), shared(2) }
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Set WEP Authentication"
|
|
::= { configIfAPEntry 14 }
|
|
|
|
configIfAPWpaVersion OBJECT-TYPE
|
|
SYNTAX WpaVersions MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WPA version.
|
|
Ignored if configIfAPSecurityMode is different than wpa-*."
|
|
::= { configIfAPEntry 15 }
|
|
|
|
configIfAPWpaCipher OBJECT-TYPE
|
|
SYNTAX CipherTypes MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "WPA cipher:
|
|
WPA mode supports only TKIP(1).
|
|
WPA2 mode supports only AES(2).
|
|
WPA3 mode supports only AES(2).
|
|
Mixed WPA/WPA2 mode supports only AESTKIP(3).
|
|
Mixed WPA2/WPA3 mode supports only AES(2).
|
|
Ignored if configIfApSecurityMode is different than wpa-*.
|
|
[FW:E2148.AC.1:3.12.10.1]"
|
|
::= { configIfAPEntry 16 }
|
|
|
|
configIfAPKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8..64))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "WPA key:
|
|
In wpa-wpa2-psk security mode, this key is pre-shared key;
|
|
In wpa-wpa3-psk security mode, this key is pre-shared key;
|
|
In wpa-wpa2 (eap) security mode, this key is shared secret;
|
|
In wpa-wpa3 (eap) security mode, this key is shared secret;"
|
|
::= { configIfAPEntry 17 }
|
|
|
|
configIfAPRadiusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "RADIUS table entry index"
|
|
::= { configIfAPEntry 18 }
|
|
|
|
configIfAPPreAuthentication OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / Disable pre-authentication"
|
|
::= { configIfAPEntry 19 }
|
|
|
|
configIfAPMACFilterBehaviour OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disabled(1)
|
|
,denyMAC(2)
|
|
,allowMAC(3)
|
|
} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "MAC address filter mode"
|
|
::= { configIfAPEntry 20 }
|
|
|
|
configIfAPMACFilterAddresses OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "MAC filter addresses separated by comas"
|
|
::= { configIfAPEntry 21 }
|
|
|
|
configIfAPWpaGroupRekey OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Time interval for rekeying the WPA GTK in second"
|
|
::= { configIfAPEntry 22 }
|
|
|
|
configIfAPWpaPairRekey OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Time interval for rekeying the WPA PTK in second"
|
|
::= { configIfAPEntry 23 }
|
|
|
|
configIfAPWpaMasterRekey OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Time interval for rekeying the WPA GMK in second"
|
|
::= { configIfAPEntry 24 }
|
|
|
|
configIfAPWpaProtectedFrame OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disabled(1)
|
|
,enable-optional(2)
|
|
,enable-required(3)
|
|
} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Protected management frame:
|
|
Set for preventing a hacker DoS attack.
|
|
Ignored if configIfApSecurityMode is different than wpa-*.
|
|
By default, the management frames are not protected.
|
|
[FW:E2148.AC.1:3.12.9.1]"
|
|
::= { configIfAPEntry 25 }
|
|
|
|
configIfAPMaxSimultaneousAssoc OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The maximum number of clients allowed to connect on the AP.
|
|
-1 indicates invalid value.
|
|
[FW:E2148.AC.1:3.12.9.1]"
|
|
::= { configIfAPEntry 26 }
|
|
|
|
configIfAPPasspointConfigName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Applied Passpoint config name.
|
|
Empty name means Passpoint not activated.
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { configIfAPEntry 27 }
|
|
|
|
-- Tables - Access points }
|
|
|
|
-- Tables - Wi-Fi mesh points {
|
|
|
|
configIfMeshTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIfMeshEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of 802.11s mesh interfaces currently defined
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netif 5 }
|
|
|
|
configIfMeshEntry OBJECT-TYPE
|
|
SYNTAX ConfigIfMeshEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about a 802.11s network
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIfMeshName }
|
|
::= { configIfMeshTable 1 }
|
|
|
|
-- Wlan elements when in Mesh mode
|
|
|
|
ConfigIfMeshEntry ::=
|
|
SEQUENCE {
|
|
configIfMeshName NetifName -- phy0wl0
|
|
,configIfMeshRowStatus RowStatus
|
|
,configIfMeshPhy NetifName
|
|
|
|
,configIfMeshId OCTET STRING
|
|
|
|
-- == security info == --
|
|
,configIfMeshSecurityMode INTEGER
|
|
,configIfMeshPreSharedKey OCTET STRING
|
|
-- == advanced configuration
|
|
,configIfMeshPathRefreshTime INTEGER
|
|
,configIfMeshMinDiscoveryTimeout INTEGER
|
|
,configIfMeshActivePathTimeout INTEGER
|
|
,configIfMeshNetworkDiameterTraversalTime INTEGER
|
|
,configIfMeshRootMode INTEGER
|
|
,configIfMeshGatesAnnouncement DisableEnable
|
|
,configIfMeshActivePathToRootTimeout INTEGER
|
|
,configIfMeshPreqRootInterval INTEGER
|
|
,configIfMeshRannRootInterval INTEGER
|
|
}
|
|
|
|
configIfMeshName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the wlan.
|
|
Referred to in the general Interfaces table."
|
|
::= { configIfMeshEntry 1 }
|
|
|
|
configIfMeshRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[radio]"
|
|
::= { configIfMeshEntry 2 }
|
|
|
|
configIfMeshPhy OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "PHY index for this wlan"
|
|
::= { configIfMeshEntry 3 }
|
|
|
|
configIfMeshId OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh ID string"
|
|
::= { configIfMeshEntry 4 }
|
|
|
|
configIfMeshSecurityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
sae(5)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Security policy"
|
|
::= { configIfMeshEntry 5 }
|
|
|
|
configIfMeshPreSharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8..64)) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "SAE preshared key. Ignored if configIfMeshSecurityMode is
|
|
different than sae."
|
|
::= { configIfMeshEntry 6 }
|
|
|
|
configIfMeshPathRefreshTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh paths refresh interval (in ms)"
|
|
::= { configIfMeshEntry 7 }
|
|
|
|
configIfMeshMinDiscoveryTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh min discovery timeout (in ms)"
|
|
::= { configIfMeshEntry 8 }
|
|
|
|
configIfMeshActivePathTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh active path timeout (in ms)"
|
|
::= { configIfMeshEntry 9 }
|
|
|
|
configIfMeshNetworkDiameterTraversalTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Duration of a there and back again trough the mesh network
|
|
(in TUs). 1 TU = 1024us"
|
|
::= { configIfMeshEntry 10 }
|
|
|
|
configIfMeshRootMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notroot(1)
|
|
,proactivepreq(2)
|
|
,proactivepreqprep(3)
|
|
,proactiverann(4)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh root mode."
|
|
::= { configIfMeshEntry 11 }
|
|
|
|
configIfMeshGatesAnnouncement OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / disable gates announcements. In case mesh root
|
|
mode is different than not_root"
|
|
::= { configIfMeshEntry 12 }
|
|
|
|
configIfMeshActivePathToRootTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh active path to root timeout (in TUs) (1 TU = 1024us).
|
|
In case mesh root mode is proactive_preq or proactive_preq_prep"
|
|
::= { configIfMeshEntry 13 }
|
|
|
|
configIfMeshPreqRootInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh preq root interval (in TUs) (1 TU = 1024us).
|
|
In case mesh root mode is proactive_preq or proactive_preq_prep"
|
|
::= { configIfMeshEntry 14 }
|
|
|
|
configIfMeshRannRootInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Mesh RANN root interval (in TUs) (1 TU = 1024us).
|
|
In case mesh root mode is proactive_rann"
|
|
::= { configIfMeshEntry 15 }
|
|
|
|
-- Tables - Wi-Fi mesh points }
|
|
|
|
-- Tables - MAC bridge (software switch) {
|
|
|
|
configIfBridgeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIfBridgeEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of MAC bridges modules currently defined
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netif 6 }
|
|
|
|
configIfBridgeEntry OBJECT-TYPE
|
|
SYNTAX ConfigIfBridgeEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about a MAC bridge
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIfBridgeName }
|
|
::= { configIfBridgeTable 1 }
|
|
|
|
-- Bridge elements
|
|
|
|
ConfigIfBridgeEntry ::=
|
|
SEQUENCE {
|
|
configIfBridgeName NetifName -- lan
|
|
,configIfBridgeRowStatus RowStatus
|
|
,configIfBridgeStp INTEGER
|
|
,configIfBridgePriority INTEGER
|
|
,configIfBridgeHello INTEGER
|
|
,configIfBridgeMaxAge INTEGER
|
|
,configIfBridgeForwardDelay INTEGER
|
|
,configIfBridgeLldpForward DisableEnable
|
|
}
|
|
|
|
configIfBridgeName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the MAC bridge.
|
|
Referred to in the general Interfaces table."
|
|
::= { configIfBridgeEntry 1 }
|
|
|
|
configIfBridgeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configIfBridgeEntry 2 }
|
|
|
|
configIfBridgeStp OBJECT-TYPE
|
|
SYNTAX INTEGER {off(1),rstp(2),stp-only(3)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "1 disables RSTP, 2 sets to automatic RSTP/STP
|
|
determination, 3 enforces legacy STP"
|
|
::= { configIfBridgeEntry 3 }
|
|
|
|
configIfBridgePriority OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "(R)STP bridge priority"
|
|
::= { configIfBridgeEntry 4 }
|
|
|
|
configIfBridgeHello OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "(R)STP hello interval"
|
|
::= { configIfBridgeEntry 5 }
|
|
|
|
configIfBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "(R)STP max age"
|
|
::= { configIfBridgeEntry 6 }
|
|
|
|
configIfBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "(R)STP forward delay"
|
|
::= { configIfBridgeEntry 7 }
|
|
|
|
configIfBridgeLldpForward OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enables the LLDP frame forwarding. Required for
|
|
profinet device cloning"
|
|
::= { configIfBridgeEntry 8 }
|
|
-- Tables - MAC bridge (software switch) }
|
|
|
|
configIfVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIfVlanEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of MAC Vlan modules currently defined
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { netif 7 }
|
|
|
|
configIfVlanEntry OBJECT-TYPE
|
|
SYNTAX ConfigIfVlanEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about a MAC Vlan
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIfVlanIndex }
|
|
::= { configIfVlanTable 1 }
|
|
|
|
ConfigIfVlanEntry ::=
|
|
SEQUENCE {
|
|
configIfVlanIndex OCTET STRING
|
|
,configIfVlanRowStatus RowStatus
|
|
,configIfVlanFriendlyName OCTET STRING
|
|
,configIfVlanHostIfName NetifName
|
|
,configIfVlanId INTEGER
|
|
}
|
|
|
|
configIfVlanIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Vlan name"
|
|
::= { configIfVlanEntry 1 }
|
|
|
|
configIfVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[PF:vlan:1]"
|
|
::= { configIfVlanEntry 2 }
|
|
|
|
configIfVlanFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "VLAN friendly name"
|
|
::= { configIfVlanEntry 3 }
|
|
|
|
configIfVlanHostIfName OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "MAC Host interface"
|
|
::= { configIfVlanEntry 4 }
|
|
|
|
configIfVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Vlan Id"
|
|
::= { configIfVlanEntry 5 }
|
|
|
|
-- Tables - SRCC {
|
|
|
|
configIfSrccTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIfSrccEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of SRCC connections currently defined.
|
|
[FW:E2148.AC.1:3.12.9.1]"
|
|
::= { netif 8 }
|
|
|
|
configIfSrccEntry OBJECT-TYPE
|
|
SYNTAX ConfigIfSrccEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of SRCC connections currently defined.
|
|
[FW:E2148.AC.1:3.12.9.1]"
|
|
INDEX { configIfSrccName }
|
|
::= { configIfSrccTable 1 }
|
|
|
|
-- Wlan elements when in SRCC mode
|
|
|
|
ConfigIfSrccEntry ::=
|
|
SEQUENCE {
|
|
configIfSrccName NetifName
|
|
,configIfSrccRowStatus RowStatus
|
|
,configIfSrccPhy NetifName
|
|
,configIfSrccDiscoverApSsid OCTET STRING
|
|
,configIfSrccProductType INTEGER
|
|
,configIfSrccDiscSigThreshold INTEGER
|
|
,configIfSrccDiscDuration INTEGER
|
|
,configIfSrccBrokenThreshold INTEGER
|
|
,configIfSrccBrokenDuration INTEGER
|
|
,configIfSrccWifiBand INTEGER
|
|
,configIfSrccFirstChannel INTEGER
|
|
,configIfSrccSecondChannel INTEGER
|
|
,configIfSrccDiscScanDuration INTEGER
|
|
,configIfSrccMixRedundancy INTEGER
|
|
,configIfSrccMixRedundancyBoost INTEGER
|
|
,configIfSrccPeerTableTimeout INTEGER
|
|
,configIfSrccTargetTableTimeout INTEGER
|
|
,configIfSrccPeerAcknowTimeout INTEGER
|
|
,configIfSrccPeerReconfigTimeout INTEGER
|
|
,configIfSrccGreBridgeIpAddr IpAddress
|
|
}
|
|
|
|
configIfSrccName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Symbolic name of the wlan.
|
|
Referred to in the general Interfaces table."
|
|
::= { configIfSrccEntry 1 }
|
|
|
|
configIfSrccRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "Row addition/deletion support
|
|
[radio]"
|
|
::= { configIfSrccEntry 2 }
|
|
|
|
configIfSrccPhy OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "PHY index for this wlan."
|
|
::= { configIfSrccEntry 3 }
|
|
|
|
configIfSrccDiscoverApSsid OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "SRCC SSID string for discovering the other potential partners."
|
|
::= { configIfSrccEntry 4 }
|
|
|
|
configIfSrccProductType OBJECT-TYPE
|
|
SYNTAX INTEGER {typeA(1),typeB(2)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The devices on the same coach edge must have the same type.
|
|
-1 indicates invalid value."
|
|
::= { configIfSrccEntry 5 }
|
|
|
|
configIfSrccDiscSigThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Link establishment threshold in dBm. By default, the value is -50.
|
|
A potential partner is valid if its signal level stays over
|
|
Link establishment threshold during more than the Link establishment duration.
|
|
Consider the OID configIfSrccDiscDuration."
|
|
::= { configIfSrccEntry 6 }
|
|
|
|
configIfSrccDiscDuration OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Link establishment duration in seconds. By default, the value is 60.
|
|
A potential partner is considered valid if its signal level stays over
|
|
Link establishment threshold during more than the Link establishment duration.
|
|
Consider the OID configIfSrccDiscSigThreshold."
|
|
::= { configIfSrccEntry 7 }
|
|
|
|
configIfSrccBrokenThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Broken link threshold in dBm. By default, the value is -70.
|
|
The established link is considered broken if its signal drops below
|
|
Broken link threshold during more than Broken Link duration.
|
|
Consider the OID configIfSrccBrokenDuration."
|
|
::= { configIfSrccEntry 8 }
|
|
|
|
configIfSrccBrokenDuration OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Broken link duration in seconds. By default, the value is 660.
|
|
The established link is considered broken if its signal drops below
|
|
Broken link threshold during more than Broken Link duration.
|
|
Consider the OID configIfSrccBrokenThreshold."
|
|
::= { configIfSrccEntry 9 }
|
|
|
|
configIfSrccWifiBand OBJECT-TYPE
|
|
SYNTAX INTEGER {band-5g(1), band-24(2)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The WiFi frequency range fo the final links.
|
|
band-5g (1) for the 5GHz and band-24 (2) for the 2.4GHz.
|
|
-1 indicates invalid value."
|
|
::= { configIfSrccEntry 10 }
|
|
|
|
configIfSrccFirstChannel OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The wireless channel associated with the first SRCC final link.
|
|
-1 indicates invalid value."
|
|
::= { configIfSrccEntry 11 }
|
|
|
|
configIfSrccSecondChannel OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The wireless channel associated with the first SRCC final link.
|
|
-1 indicates invalid value."
|
|
::= { configIfSrccEntry 12 }
|
|
|
|
configIfSrccDiscScanDuration OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The global duration in seconds of the Ethernet topology discovery scan.
|
|
By default, the value is 120."
|
|
::= { configIfSrccEntry 13 }
|
|
|
|
configIfSrccMixRedundancy OBJECT-TYPE
|
|
SYNTAX INTEGER {wifi(1), ethernet(2), none(3)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Redundancy method.
|
|
1: Wifi+Wifi
|
|
2: Wifi+Ethernet
|
|
3: Wifi alone (not redundant)
|
|
[SYNFW:3:E2148.AC.1:4.10.0.1]."
|
|
::= { configIfSrccEntry 14 }
|
|
|
|
configIfSrccMixRedundancyBoost OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Gain in percent added to the target metric.
|
|
Minimum = 1; maximum = 65535. By default, the value is 40."
|
|
::= { configIfSrccEntry 15 }
|
|
|
|
configIfSrccPeerTableTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Peer table timeout in seconds: the wireless discover timeout for a partner(peer).
|
|
By default, the value is 20."
|
|
::= { configIfSrccEntry 16 }
|
|
|
|
configIfSrccTargetTableTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Target table timeout in seconds: the wireless discover timeout for
|
|
the whole cell(the group of wireless peers). By default, the value is 120."
|
|
::= { configIfSrccEntry 17 }
|
|
|
|
configIfSrccPeerAcknowTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The duration in seconds the Master waits for the answer from all
|
|
partners after sending its proposed cell architecture.
|
|
By default, the value is 120."
|
|
::= { configIfSrccEntry 18 }
|
|
|
|
configIfSrccPeerReconfigTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The duration in seconds the Master waits for all the partners to
|
|
switch to their final roles. By default, the value is 200."
|
|
::= { configIfSrccEntry 19 }
|
|
|
|
configIfSrccGreBridgeIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Internal L2 GRE interface IP prefix represents the GRE interface IP prefix.
|
|
SRCC's internal uses a GRE L2 tunnel, in which the interface is configured with a C class IPV4 address.
|
|
The netmask for this ip network is 255.255.255.0. Thus the first 3 octets only are meaningful.
|
|
The last digit replace with 1 if the final role is AP; with 2 if the final role is client."
|
|
::= { configIfSrccEntry 20 }
|
|
|
|
-- Tables - SRCC }
|
|
|
|
-- Table GRE Tunnel L2 {
|
|
-- Put here GRE L2 settings
|
|
-- Table GRE Tunnel L2 }
|
|
|
|
-- Tables - IP subnets {
|
|
configIpSubnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of network interfaces currently associated
|
|
with an IP address
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { tcpip 1 }
|
|
|
|
configIpSubnetEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about an IP address
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpSubnetName }
|
|
::= { configIpSubnetTable 1 }
|
|
|
|
-- Elements in the IP subnet status table
|
|
|
|
ConfigIpSubnetEntry ::=
|
|
SEQUENCE {
|
|
configIpSubnetName NetifName
|
|
,configIpSubnetRowStatus RowStatus
|
|
,configIpAddressMode INTEGER
|
|
,configIpSubnetIPv4Addr IpAddress
|
|
,configIpSubnetIPv4Mask IpAddress
|
|
,configIpSubnetMetric INTEGER
|
|
,configIpSubnetDnsList OCTET STRING
|
|
,configIpSubnetInterface OCTET STRING
|
|
,configIpSubnetIPv4Gateway IpAddress
|
|
,configIpSubnetFriendlyName OCTET STRING
|
|
,configIpSubnetBridgeEnable DisableEnable
|
|
,configIpSubnetPersistence TriState
|
|
,configIpSubnetAutoStart TriState
|
|
,configIpSubnetEnable DisableEnable
|
|
,configIpSubnetPeerDns DisableEnable
|
|
,configIpSubnetDefaultRoute DisableEnable
|
|
}
|
|
|
|
configIpSubnetName OBJECT-TYPE
|
|
SYNTAX NetifName
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Interface attached to this subnet"
|
|
::= { configIpSubnetEntry 1 }
|
|
|
|
configIpSubnetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[net]"
|
|
::= { configIpSubnetEntry 2 }
|
|
|
|
configIpAddressMode OBJECT-TYPE
|
|
SYNTAX INTEGER {static(1),dhcp(2),none(3),vrrp(4)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Ip address protocol of this subnet"
|
|
::= { configIpSubnetEntry 3 }
|
|
|
|
configIpSubnetIPv4Addr OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IPv4 address given to the interface"
|
|
::= { configIpSubnetEntry 4 }
|
|
|
|
configIpSubnetIPv4Mask OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IPv4 subnet mask"
|
|
::= { configIpSubnetEntry 5 }
|
|
|
|
configIpSubnetMetric OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Subnet metric"
|
|
::= { configIpSubnetEntry 6 }
|
|
|
|
configIpSubnetDnsList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Space-separated list of DNS IP addresses"
|
|
::= { configIpSubnetEntry 7 }
|
|
|
|
configIpSubnetInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Interface related to this ipSubnet. This field
|
|
must be left blank for bridge interfaces"
|
|
::= { configIpSubnetEntry 8 }
|
|
|
|
configIpSubnetIPv4Gateway OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IPv4 gateway"
|
|
::= { configIpSubnetEntry 9 }
|
|
|
|
configIpSubnetFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Friendly name of this subnet"
|
|
::= { configIpSubnetEntry 10 }
|
|
|
|
configIpSubnetBridgeEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"Write 2 (Enable) to configure this subnet as a bridge type
|
|
interface: create a bridge over specified interface(s) in this
|
|
subnet.
|
|
|
|
Write 1 (Disable) to configure this subnet as an IP subnet type
|
|
interface: set IP settings to one specified interface.
|
|
|
|
Warning: changing an interface type from bridge to IP subnet
|
|
will delete the link between this bridge and all its interfaces."
|
|
::= { configIpSubnetEntry 11 }
|
|
|
|
configIpSubnetPersistence OBJECT-TYPE
|
|
SYNTAX TriState MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"Define the behaviour of the IP layer when the lower interface
|
|
loses its connection.
|
|
- When enabled, the IP settings (IP addresses, routes through
|
|
this interface...) remain in place.
|
|
- When disabled, the IP settings are removed, possibly hanging
|
|
a tunnel or requiring a DHCP negotiation when the connection
|
|
recovers.
|
|
- When set to default, follow the legacy behaviour i.e. enabled
|
|
for 'static' protocol configuration, disabled for 'dhcp'
|
|
configuration.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { configIpSubnetEntry 12 }
|
|
|
|
configIpSubnetEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"Set to Enable to install the layer 3 network. If disabled,
|
|
this subnet will not be initialized (thus not useable) after
|
|
the configuration is applied.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { configIpSubnetEntry 13 }
|
|
|
|
configIpSubnetAutoStart OBJECT-TYPE
|
|
SYNTAX TriState MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"Define whether, after installation and initialization, the
|
|
subnet is activated immediately (when configuration is applied)
|
|
or only when a suitable event happens. See the 'L3 network
|
|
toggle' action in the Alarms/Events subsystem.
|
|
|
|
'Enable' sets the subnet initially 'up', 'Disable' sets it
|
|
initially 'down', 'Default' sets it initially 'up' except
|
|
if configIpAddressMode=none.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { configIpSubnetEntry 14 }
|
|
|
|
configIpSubnetPeerDns OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"If this subnet is a DHCP client, should the DNS obtained from
|
|
the DHCP server replace the currently configured one?
|
|
|
|
Set to 'Enable' to give preference to the DHCP-provided DNS.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { configIpSubnetEntry 15 }
|
|
|
|
configIpSubnetDefaultRoute OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"If this subnet is a DHCP client, should the server-provided
|
|
default route replace the currently configured one?
|
|
|
|
Set to 'Enable' to give preference to the DHCP server route.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { configIpSubnetEntry 16 }
|
|
|
|
-- Tables - IP subnets }
|
|
|
|
ipFactory OBJECT IDENTIFIER ::= { tcpip 2 }
|
|
|
|
-- Packet IpFactory
|
|
synfloodprotection OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow(2)/disallow(1) SYN flood protection.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 1 }
|
|
|
|
dropinvalidpacket OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Write 2(enable) to allow invalid packetdropping. Write
|
|
1(disable) to disallow invalid packetdropping.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 2 }
|
|
|
|
-- Table Zones {
|
|
configIpZonesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpZonesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of user defined network zones
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 3 }
|
|
|
|
configIpZonesEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpZonesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about an IpFactory Zone
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpZoneIndex }
|
|
::= { configIpZonesTable 1 }
|
|
|
|
ConfigIpZonesEntry ::=
|
|
SEQUENCE {
|
|
configIpZoneIndex OCTET STRING
|
|
,configIpZoneRowStatus RowStatus
|
|
,configIpZoneFriendlyName OCTET STRING
|
|
,configIpZoneNAT DisableEnable
|
|
,configIpZoneMSSClamping DisableEnable
|
|
,configIpZoneDefaultAcceptancePolicy INTEGER
|
|
,configIpZoneRestrictedAddressFamily INTEGER
|
|
,configIpZoneConnectionTracking DisableEnable
|
|
,configIpZoneLogging DisableEnable
|
|
,configIpZoneLoggingLimit OCTET STRING
|
|
,configIpZoneInterfaces OCTET STRING
|
|
}
|
|
|
|
configIpZoneIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Zone index"
|
|
::= { configIpZonesEntry 1 }
|
|
|
|
configIpZoneRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[PF:zone_:1]"
|
|
::= { configIpZonesEntry 2 }
|
|
|
|
configIpZoneFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Friendly name"
|
|
::= { configIpZonesEntry 3 }
|
|
|
|
configIpZoneNAT OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / Disable network address translation"
|
|
::= { configIpZonesEntry 4 }
|
|
|
|
configIpZoneMSSClamping OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / Disable MSS Clamping"
|
|
::= { configIpZonesEntry 5 }
|
|
|
|
configIpZoneDefaultAcceptancePolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allenable(1)
|
|
,alldisable(2)
|
|
} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Default packet acceptance policy"
|
|
::= { configIpZonesEntry 6 }
|
|
|
|
configIpZoneRestrictedAddressFamily OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4ipv6(1)
|
|
,ipv4(2)
|
|
,ipv6(3)
|
|
} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Restrict action on the given IP address family.
|
|
Attention:WaveOS supports only IPV4."
|
|
::= { configIpZonesEntry 7 }
|
|
|
|
configIpZoneConnectionTracking OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / Disable connection tracking"
|
|
::= { configIpZonesEntry 8 }
|
|
|
|
configIpZoneLogging OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / Disable logging for this zone"
|
|
::= { configIpZonesEntry 9 }
|
|
|
|
configIpZoneLoggingLimit OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"Defines the limit of logging messages per unit of time for
|
|
this zone.
|
|
This octet string is defined as : N[/T].
|
|
Where N is the number of messages and T is one of:second,
|
|
minute, hour or day. If the time unit (slash included) is
|
|
not mentionned, /minute is used."
|
|
::= { configIpZonesEntry 10 }
|
|
|
|
configIpZoneInterfaces OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The (space separated) interface list of network
|
|
devices using this zone"
|
|
::= { configIpZonesEntry 11 }
|
|
|
|
-- Table Zones }
|
|
|
|
-- Table traffic forwarding {
|
|
configIpNatIpForwardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpNatIpForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of IP forward rules, allows to redirect the input traffic on one zone to a device on private zone.
|
|
Attention: This rule can be set when NAT is disabled but it's used only if NAT is enabled
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 4 }
|
|
|
|
configIpNatIpForwardEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpNatIpForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about an IP forward rule
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpNatIpForwardIndex }
|
|
::= { configIpNatIpForwardTable 1 }
|
|
|
|
ConfigIpNatIpForwardEntry ::=
|
|
SEQUENCE {
|
|
configIpNatIpForwardIndex OCTET STRING
|
|
,configIpNatIpForwardRowStatus RowStatus
|
|
,configIpNatIpForwardFriendlyName OCTET STRING
|
|
,configIpNatIpForwardZoneName OCTET STRING
|
|
,configIpNatIpForwardSrcIp IpAddress
|
|
,configIpNatIpForwardProtocol INTEGER
|
|
,configIpNatIpForwardPublicPort OCTET STRING
|
|
,configIpNatIpForwardPrivatePort OCTET STRING
|
|
,configIpNatIpForwardTargetIp IpAddress
|
|
}
|
|
|
|
configIpNatIpForwardIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IP forward rule index"
|
|
::= { configIpNatIpForwardEntry 1 }
|
|
|
|
configIpNatIpForwardRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[PF:rule_:1]"
|
|
::= { configIpNatIpForwardEntry 2 }
|
|
|
|
configIpNatIpForwardFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Friendly name"
|
|
::= { configIpNatIpForwardEntry 3 }
|
|
|
|
configIpNatIpForwardZoneName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Zone this rule belongs to"
|
|
::= { configIpNatIpForwardEntry 4 }
|
|
|
|
configIpNatIpForwardSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Source IP"
|
|
::= { configIpNatIpForwardEntry 5 }
|
|
|
|
configIpNatIpForwardProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1)
|
|
,tcp(2)
|
|
,udp(3)
|
|
,tcpudp(4)
|
|
,icmp(5)
|
|
} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IP protocol"
|
|
::= { configIpNatIpForwardEntry 6 }
|
|
|
|
configIpNatIpForwardPublicPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Public port"
|
|
::= { configIpNatIpForwardEntry 7 }
|
|
|
|
configIpNatIpForwardPrivatePort OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Private port"
|
|
::= { configIpNatIpForwardEntry 8 }
|
|
|
|
configIpNatIpForwardTargetIp OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The destination IP address"
|
|
::= { configIpNatIpForwardEntry 9 }
|
|
|
|
-- Table traffic forwarding }
|
|
|
|
-- Table firewall {
|
|
configIpFirewallTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpFirewallEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of ip firewall rules on specified zone
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 5 }
|
|
|
|
configIpFirewallEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpFirewallEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about an IP firewall rule
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpFirewallIndex }
|
|
::= { configIpFirewallTable 1 }
|
|
|
|
ConfigIpFirewallEntry ::=
|
|
SEQUENCE {
|
|
configIpFirewallIndex OCTET STRING
|
|
,configIpFirewallRowStatus RowStatus
|
|
,configIpFirewallZoneName OCTET STRING
|
|
,configIpFirewallProtocol INTEGER
|
|
,configIpFirewallPort OCTET STRING
|
|
,configIpFirewallAction INTEGER
|
|
,configIpFirewallDestZone OCTET STRING
|
|
,configIpFirewallSrcIP IpAddress
|
|
,configIpFirewallTargetIP IpAddress
|
|
}
|
|
|
|
configIpFirewallIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Ip forward rule index"
|
|
::= { configIpFirewallEntry 1 }
|
|
|
|
configIpFirewallRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[PF:rule_:1]"
|
|
::= { configIpFirewallEntry 2 }
|
|
|
|
configIpFirewallZoneName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Zone this rule belongs to"
|
|
::= { configIpFirewallEntry 3 }
|
|
|
|
configIpFirewallProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1)
|
|
,tcp(2)
|
|
,udp(3)
|
|
,tcpudp(4)
|
|
,icmp(5)
|
|
,gre(6)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Transport protocol"
|
|
::= { configIpFirewallEntry 4 }
|
|
|
|
configIpFirewallPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IP port"
|
|
::= { configIpFirewallEntry 5 }
|
|
|
|
configIpFirewallAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forward(1)
|
|
,reject(2)
|
|
,drop(3)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Action to take when the rule applies"
|
|
::= { configIpFirewallEntry 6 }
|
|
|
|
configIpFirewallDestZone OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Destination zone. If left blank, local interface is
|
|
selected."
|
|
::= { configIpFirewallEntry 7 }
|
|
|
|
configIpFirewallSrcIP OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The source IP of this firewall rule
|
|
[FW:E2148.AC.1:3.12.8.1]"
|
|
::= { configIpFirewallEntry 8 }
|
|
|
|
configIpFirewallTargetIP OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The destination IP of this firewall rule
|
|
[FW:E2148.AC.1:3.12.8.1]"
|
|
::= { configIpFirewallEntry 9 }
|
|
|
|
|
|
-- Table firewall }
|
|
|
|
-- Table static rules {
|
|
configIpRoutesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpRoutesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of IP static routes
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 6 }
|
|
|
|
configIpRoutesEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpRoutesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about an IP static route
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpRoutesIndex }
|
|
::= { configIpRoutesTable 1 }
|
|
|
|
ConfigIpRoutesEntry ::=
|
|
SEQUENCE {
|
|
configIpRoutesIndex INTEGER
|
|
,configIpRoutesRowStatus RowStatus
|
|
,configIpRoutesNetwork OCTET STRING
|
|
,configIpRoutesTarget IpAddress
|
|
,configIpRoutesNetmask IpAddress
|
|
,configIpRoutesGateway IpAddress
|
|
,configIpRoutesMetric INTEGER
|
|
,configIpRoutesMTU INTEGER
|
|
}
|
|
|
|
configIpRoutesIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Static route index"
|
|
::= { configIpRoutesEntry 1 }
|
|
|
|
configIpRoutesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configIpRoutesEntry 2 }
|
|
|
|
configIpRoutesNetwork OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Network this rule is attached to"
|
|
::= { configIpRoutesEntry 3 }
|
|
|
|
configIpRoutesTarget OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Target IP or network"
|
|
::= { configIpRoutesEntry 4 }
|
|
|
|
configIpRoutesNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Target network. If target is a network"
|
|
::= { configIpRoutesEntry 5 }
|
|
|
|
configIpRoutesGateway OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IP gateway"
|
|
::= { configIpRoutesEntry 6 }
|
|
|
|
configIpRoutesMetric OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Packet metric"
|
|
::= { configIpRoutesEntry 7 }
|
|
|
|
configIpRoutesMTU OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Packet MTU"
|
|
::= { configIpRoutesEntry 8 }
|
|
|
|
-- Table static routes }
|
|
|
|
-- Table Zone Forward {
|
|
configIpZoneForwardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpZoneForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of zone forward rules
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 7 }
|
|
|
|
configIpZoneForwardEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpZoneForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a zone forward rule
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpZoneForwardIndex }
|
|
::= { configIpZoneForwardTable 1 }
|
|
|
|
ConfigIpZoneForwardEntry ::=
|
|
SEQUENCE {
|
|
configIpZoneForwardIndex INTEGER
|
|
,configIpZoneForwardSrc OCTET STRING
|
|
,configIpZoneForwardDst OCTET STRING
|
|
,configIpZoneForwardRowStatus RowStatus
|
|
}
|
|
|
|
configIpZoneForwardIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Zone forwarding index"
|
|
::= { configIpZoneForwardEntry 1 }
|
|
|
|
configIpZoneForwardRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configIpZoneForwardEntry 2 }
|
|
|
|
configIpZoneForwardSrc OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Source Zone"
|
|
::= { configIpZoneForwardEntry 3 }
|
|
|
|
configIpZoneForwardDst OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Destination Zone"
|
|
::= { configIpZoneForwardEntry 4 }
|
|
|
|
-- Table Zone Forward }
|
|
|
|
-- DSCP Tagging {
|
|
|
|
configIpDscpTaggingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigIpDscpTaggingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of DSCP tagging rules
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ipFactory 8 }
|
|
|
|
configIpDscpTaggingEntry OBJECT-TYPE
|
|
SYNTAX ConfigIpDscpTaggingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Details about a DSCP tagging rule
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configIpDscpTaggingIndex }
|
|
::= { configIpDscpTaggingTable 1 }
|
|
|
|
ConfigIpDscpTaggingEntry ::=
|
|
SEQUENCE {
|
|
configIpDscpTaggingIndex OCTET STRING
|
|
,configIpDscpTaggingRowStatus RowStatus
|
|
,configIpDscpTaggingFriendlyName OCTET STRING
|
|
,configIpDscpTaggingProtocol INTEGER
|
|
,configIpDscpTaggingSrcIP IpAddress
|
|
,configIpDscpTaggingDstIP IpAddress
|
|
,configIpDscpTaggingSrcPort OCTET STRING
|
|
,configIpDscpTaggingDstPort OCTET STRING
|
|
,configIpDscpTaggingDscpValue INTEGER
|
|
}
|
|
|
|
configIpDscpTaggingIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "DSCP tagging rule index
|
|
Enter a memonic name for this rule. Only letters, digits and underscores"
|
|
::= { configIpDscpTaggingEntry 1 }
|
|
|
|
configIpDscpTaggingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configIpDscpTaggingEntry 2 }
|
|
|
|
configIpDscpTaggingFriendlyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Rule friendly name"
|
|
::= { configIpDscpTaggingEntry 3 }
|
|
|
|
configIpDscpTaggingProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1)
|
|
,tcp(2)
|
|
,udp(3)
|
|
,icmp(4)
|
|
}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The protocol filter"
|
|
::= { configIpDscpTaggingEntry 4 }
|
|
|
|
configIpDscpTaggingSrcIP OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The source IP filter"
|
|
::= { configIpDscpTaggingEntry 5 }
|
|
|
|
configIpDscpTaggingDstIP OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The destination IP filter"
|
|
::= { configIpDscpTaggingEntry 6 }
|
|
|
|
configIpDscpTaggingSrcPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The source port filter"
|
|
::= { configIpDscpTaggingEntry 7 }
|
|
|
|
configIpDscpTaggingDstPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The destination port filter"
|
|
::= { configIpDscpTaggingEntry 8 }
|
|
|
|
configIpDscpTaggingDscpValue OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "The DSCP value applied by this rule"
|
|
::= { configIpDscpTaggingEntry 9 }
|
|
|
|
-- DSCP Tagging }
|
|
|
|
-- Tables - IP routes {
|
|
--configIpRoutesTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF ConfigIpRouteEntry
|
|
-- MAX-ACCESS not-accessible STATUS current
|
|
-- DESCRIPTION "List of configured IPv4 routes (NOT IMPLEMENTED YET)"
|
|
-- ::= { tcpip 2 }
|
|
--
|
|
--configIpRouteEntry OBJECT-TYPE
|
|
-- SYNTAX ConfigIpRouteEntry
|
|
-- MAX-ACCESS not-accessible STATUS current
|
|
-- DESCRIPTION "Details about a configured IPv4 route"
|
|
--INDEX { configIpSubnetIndex }
|
|
-- ::= { configIpRoutesTable 1 }
|
|
--
|
|
-- Elements in the IP routes configuration table
|
|
--
|
|
-- ConfigIpRouteEntry ::= SEQUENCE {
|
|
-- configRouteIndex INTEGER
|
|
-- ,configIpRouteRowStatus RowStatus
|
|
-- ,configRouteType INTEGER
|
|
-- ,configRouteDest IpAddress
|
|
-- ,configRouteNextHop IpAddress
|
|
-- ,configRouteMask IpAddress
|
|
-- }
|
|
--
|
|
-- configRouteIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
-- DESCRIPTION "Route index"
|
|
-- ::= { configIpRouteEntry 1 }
|
|
--
|
|
-- configRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
-- DESCRIPTION "row addition/deletion support"
|
|
-- ::= { configEntry 2 }
|
|
--
|
|
-- configRouteType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {host(1),net(2)}
|
|
-- MAX-ACCESS read-write STATUS current
|
|
-- DESCRIPTION "Route type"
|
|
-- ::= { configIpRouteEntry 3 }
|
|
--
|
|
-- configRouteDest OBJECT-TYPE
|
|
-- SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
-- DESCRIPTION "IPv4 address of the target remote network"
|
|
-- ::= { configIpRouteEntry 4 }
|
|
--
|
|
-- configRouteNextHop OBJECT-TYPE
|
|
-- SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
-- DESCRIPTION "Gateway used to communicate with the remote network"
|
|
-- ::= { configIpRouteEntry 5 }
|
|
--
|
|
-- configRouteMask OBJECT-TYPE
|
|
-- SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
-- DESCRIPTION "Mask of bits used in comparing candidate
|
|
-- addresses with destination"
|
|
-- ::= { configIpRouteEntry 6 }
|
|
-- Table routes }
|
|
|
|
-- ====================================
|
|
-- roaming (dual interface fast handover) {
|
|
--
|
|
|
|
roamingAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), scan(1), cbb(2), plh(3) }
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Dual interface handover method.
|
|
None: the same radio interface scans and transfers data.
|
|
Scan: one designated radio scans only, and the other transfers data.
|
|
CBB (Connect Before Break): while a radio transfers data, the other
|
|
^^^ scans and connects, to allow immediate traffic diversion.
|
|
PLH (Predictive Linear Handover): variation of CBB where AP's are
|
|
^^^ expected to line up, and direction of movement, therefore AP
|
|
^^^ signal level slope, determines next AP to use.
|
|
|
|
NOTE! setting this OID is as yet unsupported. Use the GUI instead.
|
|
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roaming 1 }
|
|
|
|
roamingPLHposition OBJECT-TYPE
|
|
SYNTAX INTEGER {front(1), rear(2)} MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Position of the antenna relative to vehicle motion.
|
|
Front: the vehicle antenna moves closer to the target APs.
|
|
Rear: the vehicle antenna moves away from the target APs.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roaming 2 }
|
|
|
|
roamingPLHjitter OBJECT-TYPE
|
|
SYNTAX INTEGER (0..20) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION
|
|
"Minimum variation from highest sample to detect a slope
|
|
direction change; e.g. 1 means detection needs at least 2 dB
|
|
difference since the first 1dB is ignored.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roaming 3 }
|
|
|
|
roamingPLHurgent OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"When the current AP is below this level and there is no
|
|
candidate AP, the candidate selection rules are relaxed
|
|
and the statusRoamingUrgent OID changes state.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roaming 4 }
|
|
|
|
roamingPLHfront OBJECT IDENTIFIER ::= { roaming 5 }
|
|
|
|
roamingPLHfrontCandMin OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Minimum signal level from an AP to select it as candidate
|
|
target for a handover.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHfront 1 }
|
|
|
|
roamingPLHfrontCandMax OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Maximum signal level from an AP to select it as candidate
|
|
target for a handover.
|
|
An AP above this is supposedly about to be bypassed and might
|
|
fade quickly.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHfront 2 }
|
|
|
|
roamingPLHfrontCurrentLow OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Signal level from the AP dedicated to data transfer, below
|
|
which a handover to a candidate will be attempted.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHfront 3 }
|
|
|
|
roamingPLHfrontCurrentHigh OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Signal level from the AP dedicated to data transfer, above
|
|
which a handover to a candidate will be attempted.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHfront 4 }
|
|
|
|
roamingPLHrear OBJECT IDENTIFIER ::= { roaming 6 }
|
|
|
|
roamingPLHrearCandMin OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Minimum signal level from an AP to select it as candidate
|
|
target for a handover.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHrear 1 }
|
|
|
|
roamingPLHrearCandMax OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Maximum signal level from an AP to select it as candidate
|
|
target for a handover.
|
|
An AP above this is supposedly about to be bypassed and might
|
|
fade quickly.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHrear 2 }
|
|
|
|
roamingPLHrearCurrentLow OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Signal level from the AP dedicated to data transfer, below
|
|
which a handover to a candidate will be attempted.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHrear 3 }
|
|
|
|
roamingPLHrearCurrentHigh OBJECT-TYPE
|
|
SYNTAX WifiLevel MAX-ACCESS read-write STATUS current DESCRIPTION
|
|
"Signal level from the AP dedicated to data transfer, above
|
|
which a handover to a candidate will be attempted.
|
|
[FW:E2148.AC.1:4.12.0.1]"
|
|
::= { roamingPLHrear 4 }
|
|
|
|
-- dual roaming configuration }
|
|
|
|
-- ====================================
|
|
-- serviceStatus (config files state) {
|
|
--
|
|
ss-webserver OBJECT IDENTIFIER ::= { serviceStatus 1 }
|
|
ss-dhcp OBJECT IDENTIFIER ::= { serviceStatus 2 }
|
|
ss-ntp OBJECT IDENTIFIER ::= { serviceStatus 3 }
|
|
ss-radius OBJECT IDENTIFIER ::= { serviceStatus 4 }
|
|
ss-snmp OBJECT IDENTIFIER ::= { serviceStatus 5 }
|
|
ss-dns OBJECT IDENTIFIER ::= { serviceStatus 6 }
|
|
ss-system OBJECT IDENTIFIER ::= { serviceStatus 7 }
|
|
ss-gnss OBJECT IDENTIFIER ::= { serviceStatus 8 }
|
|
ss-tcn OBJECT IDENTIFIER ::= { serviceStatus 9 }
|
|
ss-async-sysupgrade OBJECT IDENTIFIER ::= { serviceStatus 10 }
|
|
|
|
-- serviceStatus }
|
|
|
|
-- SNMP agent variants (to distinguish WLg and WLn through sysObjectID) {
|
|
snmpAgentOIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnmpAgentOIDEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of SNMP agents variants for this entreprise
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ss-snmp 1 }
|
|
|
|
snmpAgentOIDEntry OBJECT-TYPE
|
|
SYNTAX SnmpAgentOIDEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about the SNMP agent implementation"
|
|
INDEX { snmpAgentOIDIndex }
|
|
::= { snmpAgentOIDTable 1 }
|
|
|
|
-- Elements in the IP routes configuration table
|
|
|
|
SnmpAgentOIDEntry ::= SEQUENCE {
|
|
snmpAgentOIDIndex INTEGER
|
|
,snmpAgentOIDProductID INTEGER
|
|
}
|
|
|
|
snmpAgentOIDIndex OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Agent variant ID"
|
|
::= { snmpAgentOIDEntry 1 }
|
|
|
|
snmpAgentOIDProductID OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Product ID code currently handled by this agent"
|
|
::= { snmpAgentOIDEntry 2 }
|
|
|
|
systemReady OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-ready(1)
|
|
,ready(2)
|
|
} MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This OID returns 2 when the product is fully initialized and
|
|
ready to communicate. It returns 1 instead.
|
|
Please refer to the wireless status in order to check the state
|
|
of the wireless link.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { ss-system 1 }
|
|
|
|
sensors OBJECT IDENTIFIER::= {ss-system 2}
|
|
tempSensors OBJECT IDENTIFIER::= {sensors 1}
|
|
|
|
-- { Temperature sensors
|
|
motherBoard0 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature given by the motherboard sensor 0 in mC. A temperature
|
|
equals or below -274000mC means that the sensor is not available.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { tempSensors 1 }
|
|
|
|
-- }
|
|
|
|
-- { Gpio input table
|
|
gpioInTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GpioInEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Digital input table
|
|
[FW:E2148.AC.1:3.16.0.1]"
|
|
::= { sensors 2 }
|
|
|
|
gpioInEntry OBJECT-TYPE
|
|
SYNTAX GpioInEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Digital input table
|
|
[FW:E2148.AC.1:3.16.0.1]"
|
|
INDEX { gpioInIndex }
|
|
::= { gpioInTable 1 }
|
|
|
|
-- Elements in the gpio in table
|
|
|
|
GpioInEntry ::=
|
|
SEQUENCE {
|
|
gpioInIndex INTEGER,
|
|
gpioInState INTEGER
|
|
}
|
|
|
|
gpioInIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "gpio index"
|
|
::= { gpioInEntry 1 }
|
|
|
|
gpioInState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "gpio index"
|
|
::= { gpioInEntry 2 }
|
|
-- }
|
|
-- { Gpio output table
|
|
gpioOutTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GpioOutEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Digital output table
|
|
[FW:E2148.AC.1:3.16.0.1]"
|
|
::= { sensors 3 }
|
|
|
|
gpioOutEntry OBJECT-TYPE
|
|
SYNTAX GpioOutEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Digital output table
|
|
[FW:E2148.AC.1:3.16.0.1]"
|
|
INDEX { gpioOutIndex }
|
|
::= { gpioOutTable 1 }
|
|
|
|
-- Elements in the gpio in table
|
|
|
|
GpioOutEntry ::=
|
|
SEQUENCE {
|
|
gpioOutIndex INTEGER,
|
|
gpioOutState INTEGER
|
|
}
|
|
|
|
gpioOutIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "gpio index"
|
|
::= { gpioOutEntry 1 }
|
|
|
|
gpioOutState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "gpio index"
|
|
::= { gpioOutEntry 2 }
|
|
-- }
|
|
gnss-current-position OBJECT IDENTIFIER::= {ss-gnss 1}
|
|
|
|
positionValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the GPS has managed to determine
|
|
the position or not.
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 1 }
|
|
|
|
fixdate OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "UTC date format YYYYMMDD
|
|
[FW:E2148.AC.1:4.14.0.1]
|
|
"
|
|
::= { gnss-current-position 2 }
|
|
|
|
fixtime OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "UTC time format HHMMSS.mmm
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 3 }
|
|
|
|
latitude OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Value in degrees
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 4 }
|
|
|
|
longitude OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Value in degrees
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 5 }
|
|
|
|
altitude OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Value in meters
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 6 }
|
|
|
|
speedkmh OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "speed in km/h
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 7 }
|
|
|
|
courseDegrees OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Direction angle from North
|
|
Valid only if speed not null.
|
|
Return a type string
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 8 }
|
|
|
|
fixdimension OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Returns 2 for latitude/longitude only, 3 when
|
|
altitude is available, 0 when fix is invalid.
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 9 }
|
|
|
|
gnssAllPositions OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Returns all GNSS fix data in a single column-separated string.
|
|
The fields order is as follows: positionValid, fixDimension,
|
|
fixDate, fixTime, latitude, longitude, altitude, speedkmh,
|
|
courseDegrees.
|
|
[FW:E2148.AC.1:3.14.0.1]
|
|
"
|
|
::= { gnss-current-position 10 }
|
|
|
|
-- Table DHCP }%%%%%%
|
|
|
|
-- async sysupgrade {
|
|
firmwareExists OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "True if there is a valid firmware uploaded to the product.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { ss-async-sysupgrade 1 }
|
|
|
|
firmwareInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Version of all parts in the uploaded firmware and check checksum of uploaded firmware.
|
|
Pattern: [part1 name]:[part1 version];[part2 name]:[part2 version];...;[checksum method]:[checksum value]
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { ss-async-sysupgrade 2 }
|
|
|
|
sysupgradeMissed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "True if there is a missed sysupgrade.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { ss-async-sysupgrade 3 }
|
|
|
|
-- async sysupgrade }
|
|
|
|
-- ===========================================
|
|
-- serviceConfiguration (config files state) {
|
|
--
|
|
sc-webserver OBJECT IDENTIFIER ::= { serviceConfiguration 1 }
|
|
sc-dhcp OBJECT IDENTIFIER ::= { serviceConfiguration 2 }
|
|
sc-ntp OBJECT IDENTIFIER ::= { serviceConfiguration 3 }
|
|
sc-radius OBJECT IDENTIFIER ::= { serviceConfiguration 4 }
|
|
sc-snmp OBJECT IDENTIFIER ::= { serviceConfiguration 5 }
|
|
sc-dns OBJECT IDENTIFIER ::= { serviceConfiguration 6 }
|
|
sc-ssh OBJECT IDENTIFIER ::= { serviceConfiguration 7 }
|
|
sc-tcn OBJECT IDENTIFIER ::= { serviceConfiguration 8 }
|
|
sc-collectd OBJECT IDENTIFIER ::= { serviceConfiguration 9 }
|
|
sc-passpoint OBJECT IDENTIFIER ::= { serviceConfiguration 10 }
|
|
sc-async-sysupgrade OBJECT IDENTIFIER ::= { serviceConfiguration 11 }
|
|
sc-md5sum OBJECT IDENTIFIER ::= { serviceConfiguration 12 }
|
|
|
|
-- Http(s) server configuration
|
|
configHttpServer OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION " Enable / disable the internal Http server.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-webserver 1 }
|
|
|
|
configHttpServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Internal Http server TCP port. If the http server is disabled,
|
|
this OID returns 0
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-webserver 2 }
|
|
|
|
configHttpsServer OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable / disable the internal Https server.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-webserver 3 }
|
|
|
|
configHttpsPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Internal Https server TCP port. If the https server is disabled,
|
|
this OID returns 0
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-webserver 4 }
|
|
|
|
configHttpsCertificate OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Internal Https server certificate.
|
|
A GET for this OID returns a string whose first
|
|
byte is '1' if the key was uploaded, else '0'
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-webserver 5 }
|
|
|
|
-- Tables - DHCP servers {
|
|
configDhcpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigDhcpEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "List of DHCP servers per subnet
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-dhcp 1 }
|
|
|
|
configDhcpEntry OBJECT-TYPE
|
|
SYNTAX ConfigDhcpEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Details about a configured DHCP server
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
INDEX { configDhcpSubnet }
|
|
::= { configDhcpTable 1 }
|
|
|
|
-- Elements in the IP routes configuration table
|
|
|
|
ConfigDhcpEntry ::= SEQUENCE {
|
|
configDhcpSubnet NetifName
|
|
,configDhcpRowStatus RowStatus
|
|
,configDhcpEnable INTEGER
|
|
,configDhcpPoolStart INTEGER
|
|
,configDhcpPoolCount INTEGER
|
|
,configDhcpLeaseDuration INTEGER
|
|
}
|
|
|
|
configDhcpSubnet OBJECT-TYPE
|
|
SYNTAX NetifName MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Interface on which this DHCP server instance is run"
|
|
::= { configDhcpEntry 1 }
|
|
|
|
configDhcpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support
|
|
[net]
|
|
[MAX-ACCESS:read-only]"
|
|
::= { configDhcpEntry 2 }
|
|
|
|
configDhcpEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable DHCP server instance"
|
|
::= { configDhcpEntry 3 }
|
|
|
|
configDhcpPoolStart OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "First IP address in the pool"
|
|
::= { configDhcpEntry 4 }
|
|
|
|
configDhcpPoolCount OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Number of IP addresses in the pool"
|
|
::= { configDhcpEntry 5 }
|
|
|
|
configDhcpLeaseDuration OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Lease time (seconds)"
|
|
::= { configDhcpEntry 6 }
|
|
-- Table DHCP }
|
|
|
|
-- NTP {
|
|
configNtp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Not implemented yet"
|
|
::= { sc-ntp 1 }
|
|
-- NTP }
|
|
|
|
-- DNS configuration {
|
|
configRelay OBJECT IDENTIFIER ::= { sc-dns 1 }
|
|
-- DNS Relay configuration {
|
|
configDnsRebindProtection OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION " Enable / disable DNS rebind attack protection.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { configRelay 1 }
|
|
|
|
configDnsRebindLocalhost OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION " Allow / Disallow DNS response with IP address in 127.0.0.0/8 range.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { configRelay 2 }
|
|
-- DNS Relay configuration }
|
|
-- DNS configuration }
|
|
|
|
-- SSH configuration {
|
|
|
|
configSshEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable ssh
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { sc-ssh 1 }
|
|
|
|
configSshEnablePwd OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable ssh user/password login
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-ssh 2 }
|
|
|
|
-- SSH configuration }
|
|
|
|
-- MD5SUM {
|
|
|
|
configMD5SUMstatus OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Set any value to re-calculate md5 sums of filesystem.
|
|
Do a GET to get number of failed files.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-md5sum 1 }
|
|
|
|
configMD5SUMfiles OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Return the failed files list
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-md5sum 2 }
|
|
|
|
-- MD5SUM }
|
|
|
|
-- Table - Acksys Telemetry {
|
|
|
|
configCollectdEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd service enable
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { sc-collectd 1 }
|
|
|
|
configCollectdSamplingInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd sampling interval in seconds
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { sc-collectd 2 }
|
|
|
|
plugin-GPS OBJECT IDENTIFIER ::= { sc-collectd 3 }
|
|
|
|
configCollectdGPSEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd plugin GPS enable
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-GPS 1 }
|
|
|
|
configCollectdGPSServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd plugin GPS server's IP address
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-GPS 2 }
|
|
|
|
configCollectdGPSServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd plugin GPS server's port
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-GPS 3 }
|
|
|
|
configCollectdGPSConnTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd plugin GPS connection timeout in seconds
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-GPS 4 }
|
|
|
|
configCollectdGPSReqInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Collectd plugin GPS request interval in seconds
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-GPS 5 }
|
|
|
|
plugin-AcksysScanResult OBJECT IDENTIFIER ::= { sc-collectd 4 }
|
|
|
|
configCollectdWirelessScanResult OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable wireless scan result collection
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-AcksysScanResult 1 }
|
|
|
|
plugin-iwinfo OBJECT IDENTIFIER ::= { sc-collectd 5 }
|
|
|
|
configCollectdIwinfo OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable wireless info collection
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-iwinfo 1 }
|
|
|
|
plugin-AcksysTelemetry OBJECT IDENTIFIER ::= { sc-collectd 6 }
|
|
|
|
configAcksysTelemetryEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Enable Acksys telemetry plugin
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-AcksysTelemetry 1 }
|
|
|
|
configAcksysTelemetryServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Acksys telemetry plugin server's port
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-AcksysTelemetry 2 }
|
|
|
|
configAcksysTelemetryOutputInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Interval in seconds of Acksys telemetry data transmission
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-AcksysTelemetry 3 }
|
|
|
|
configAcksysTelemetryMaxBufferSize OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Size of buffer that acksys telemetry used internally
|
|
[FW:E2148.AC.1:4.10.0.1]"
|
|
::= { plugin-AcksysTelemetry 4 }
|
|
|
|
-- Table - Acksys Telemetry }
|
|
|
|
-- Service Passpoint {
|
|
-- Table Passpoint config {
|
|
|
|
configPasspointConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigPasspointConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of Passpoint configurations
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 1 }
|
|
|
|
configPasspointConfigEntry OBJECT-TYPE
|
|
SYNTAX ConfigPasspointConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of Passpoint configuration
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configPasspointConfigName }
|
|
::= { configPasspointConfigTable 1 }
|
|
|
|
ConfigPasspointConfigEntry ::=
|
|
SEQUENCE {
|
|
configPasspointConfigName OCTET STRING
|
|
,configPasspointConfigRowStatus RowStatus
|
|
,configPasspointConfigAnqpAccessNetworkType INTEGER
|
|
,configPasspointConfigAnqpInternet DisableEnable
|
|
,configPasspointConfigAnqpAsra DisableEnable
|
|
,configPasspointConfigAnqpEsr DisableEnable
|
|
,configPasspointConfigAnqpUesa DisableEnable
|
|
,configPasspointConfigAnqpHessid OCTET STRING
|
|
,configPasspointConfigAnqpGasAddress3 INTEGER
|
|
,configPasspointConfigAnqpVenueProfile OCTET STRING
|
|
,configPasspointConfigAnqpRoamingConsortiumProfile OCTET STRING
|
|
,configPasspointConfigAnqpNetworkAuthTypeProfile OCTET STRING
|
|
,configPasspointConfigAnqpIpAddrTypeAvailProfile OCTET STRING
|
|
,configPasspointConfigAnqpDomainNameProfile OCTET STRING
|
|
,configPasspointConfigAnqp3gppCellNetProfile OCTET STRING
|
|
,configPasspointConfigAnqpNaiRealmProfile OCTET STRING
|
|
,configPasspointConfigAnqpOverrideElementProfile OCTET STRING
|
|
,configPasspointConfigHS20DisableDgaf DisableEnable
|
|
,configPasspointConfigHS20DomainId INTEGER
|
|
,configPasspointConfigHS20DeauthReqTimeout INTEGER
|
|
,configPasspointConfigHS20OsuSsid OCTET STRING
|
|
,configPasspointConfigHS20OperFriendlyNameProfile OCTET STRING
|
|
,configPasspointConfigHS20ConnCapProfile OCTET STRING
|
|
,configPasspointConfigHS20WanMetricsProfile OCTET STRING
|
|
,configPasspointConfigHS20OperClassProfile OCTET STRING
|
|
,configPasspointConfigHS20OsuProviderProfile OCTET STRING
|
|
}
|
|
|
|
configPasspointConfigName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigName"
|
|
::= { configPasspointConfigEntry 1 }
|
|
|
|
configPasspointConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configPasspointConfigEntry 2 }
|
|
|
|
configPasspointConfigAnqpAccessNetworkType OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpAccessNetworkType"
|
|
::= { configPasspointConfigEntry 3 }
|
|
|
|
configPasspointConfigAnqpInternet OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpInternet"
|
|
::= { configPasspointConfigEntry 4 }
|
|
|
|
configPasspointConfigAnqpAsra OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpAsra"
|
|
::= { configPasspointConfigEntry 5 }
|
|
|
|
configPasspointConfigAnqpEsr OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpEsr"
|
|
::= { configPasspointConfigEntry 6 }
|
|
|
|
configPasspointConfigAnqpUesa OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpUesa"
|
|
::= { configPasspointConfigEntry 7 }
|
|
|
|
configPasspointConfigAnqpHessid OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpHessid"
|
|
::= { configPasspointConfigEntry 8 }
|
|
|
|
configPasspointConfigAnqpGasAddress3 OBJECT-TYPE
|
|
SYNTAX INTEGER { p2p(0), ieee80211-std(1), non-compliant(2)}
|
|
MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpGasAddress3"
|
|
::= { configPasspointConfigEntry 9 }
|
|
|
|
configPasspointConfigAnqpVenueProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpVenueProfile"
|
|
::= { configPasspointConfigEntry 10 }
|
|
|
|
configPasspointConfigAnqpRoamingConsortiumProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpRoamingConsortiumProfile"
|
|
::= { configPasspointConfigEntry 11 }
|
|
|
|
configPasspointConfigAnqpNetworkAuthTypeProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpNetworkAuthTypeProfile"
|
|
::= { configPasspointConfigEntry 12 }
|
|
|
|
configPasspointConfigAnqpIpAddrTypeAvailProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpIpAddrTypeAvailProfile"
|
|
::= { configPasspointConfigEntry 13 }
|
|
|
|
configPasspointConfigAnqpDomainNameProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpDomainNameProfile"
|
|
::= { configPasspointConfigEntry 14 }
|
|
|
|
configPasspointConfigAnqp3gppCellNetProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqp3gppCellNetProfile"
|
|
::= { configPasspointConfigEntry 15 }
|
|
|
|
configPasspointConfigAnqpNaiRealmProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpNaiRealmProfile"
|
|
::= { configPasspointConfigEntry 16 }
|
|
|
|
configPasspointConfigAnqpOverrideElementProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigAnqpOverrideElementProfile"
|
|
::= { configPasspointConfigEntry 17 }
|
|
|
|
configPasspointConfigHS20DisableDgaf OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20DisableDgaf"
|
|
::= { configPasspointConfigEntry 18 }
|
|
|
|
configPasspointConfigHS20DomainId OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20DomainId"
|
|
::= { configPasspointConfigEntry 19 }
|
|
|
|
configPasspointConfigHS20DeauthReqTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20DeauthReqTimeout"
|
|
::= { configPasspointConfigEntry 20 }
|
|
|
|
configPasspointConfigHS20OsuSsid OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20OsuSsid"
|
|
::= { configPasspointConfigEntry 21 }
|
|
|
|
configPasspointConfigHS20OperFriendlyNameProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20OperFriendlyNameProfile"
|
|
::= { configPasspointConfigEntry 22 }
|
|
|
|
configPasspointConfigHS20ConnCapProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20ConnCapProfile"
|
|
::= { configPasspointConfigEntry 23 }
|
|
|
|
configPasspointConfigHS20WanMetricsProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20WanMetricsProfile"
|
|
::= { configPasspointConfigEntry 24 }
|
|
|
|
configPasspointConfigHS20OperClassProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20OperClassProfile"
|
|
::= { configPasspointConfigEntry 25 }
|
|
|
|
configPasspointConfigHS20OsuProviderProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "configPasspointConfigHS20OsuProviderProfile"
|
|
::= { configPasspointConfigEntry 26 }
|
|
|
|
-- Table Passpoint config }
|
|
|
|
configAnqpProfileVenueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileVenueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileVenueTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 2 }
|
|
|
|
configAnqpProfileVenueEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileVenueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileVenue
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileVenueName }
|
|
::={ configAnqpProfileVenueTable 1 }
|
|
|
|
ConfigAnqpProfileVenueEntry ::=
|
|
SEQUENCE {
|
|
configProfileVenueName OCTET STRING
|
|
,configProfileVenueRowStatus RowStatus
|
|
,configProfileVenueDesc OCTET STRING
|
|
,configVenueGroup INTEGER
|
|
,configVenueType INTEGER
|
|
,configVenueNameList OCTET STRING
|
|
}
|
|
|
|
configProfileVenueName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileVenueEntry 1 }
|
|
|
|
configProfileVenueRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileVenueEntry 2 }
|
|
|
|
configProfileVenueDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileVenueEntry 3 }
|
|
|
|
configVenueGroup OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Venue groupe"
|
|
::= { configAnqpProfileVenueEntry 4 }
|
|
|
|
configVenueType OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Venue groupe"
|
|
::= { configAnqpProfileVenueEntry 5 }
|
|
|
|
configVenueNameList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Venue name. Format: [country 1 code]:[name 1 string],[country 2 code]:[name 2 string]..."
|
|
::= { configAnqpProfileVenueEntry 6 }
|
|
|
|
configAnqpProfileRoamingConsortiumTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileRoamingConsortiumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileRoamingConsortiumTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 3 }
|
|
|
|
configAnqpProfileRoamingConsortiumEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileRoamingConsortiumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileRoamingConsortium
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileRoamingConsortiumName }
|
|
::={ configAnqpProfileRoamingConsortiumTable 1 }
|
|
|
|
ConfigAnqpProfileRoamingConsortiumEntry ::=
|
|
SEQUENCE {
|
|
configProfileRoamingConsortiumName OCTET STRING
|
|
,configProfileRoamingConsortiumRowStatus RowStatus
|
|
,configProfileRoamingConsortiumDesc OCTET STRING
|
|
,configRoamingConsortiumList OCTET STRING
|
|
}
|
|
|
|
configProfileRoamingConsortiumName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileRoamingConsortiumEntry 1 }
|
|
|
|
configProfileRoamingConsortiumRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileRoamingConsortiumEntry 2 }
|
|
|
|
configProfileRoamingConsortiumDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileRoamingConsortiumEntry 3 }
|
|
|
|
configRoamingConsortiumList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "List of roaming consortium."
|
|
::= { configAnqpProfileRoamingConsortiumEntry 4 }
|
|
|
|
configAnqpProfileNetworkAuthTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileNetworkAuthTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileNetworkAuthTypeTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 4 }
|
|
|
|
configAnqpProfileNetworkAuthTypeEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileNetworkAuthTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileNetworkAuthType
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileNetworkAuthTypeName }
|
|
::={ configAnqpProfileNetworkAuthTypeTable 1 }
|
|
|
|
ConfigAnqpProfileNetworkAuthTypeEntry ::=
|
|
SEQUENCE {
|
|
configProfileNetworkAuthTypeName OCTET STRING
|
|
,configProfileNetworkAuthTypeRowStatus RowStatus
|
|
,configProfileNetworkAuthTypeDesc OCTET STRING
|
|
,configNetworkAuthType OCTET STRING
|
|
}
|
|
|
|
configProfileNetworkAuthTypeName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileNetworkAuthTypeEntry 1 }
|
|
|
|
configProfileNetworkAuthTypeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileNetworkAuthTypeEntry 2 }
|
|
|
|
configProfileNetworkAuthTypeDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileNetworkAuthTypeEntry 3 }
|
|
|
|
configNetworkAuthType OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Network auth type"
|
|
::= { configAnqpProfileNetworkAuthTypeEntry 4 }
|
|
|
|
configAnqpProfileIpAddrTypeAvailTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileIpAddrTypeAvailEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileIpAddrTypeAvailTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 5 }
|
|
|
|
configAnqpProfileIpAddrTypeAvailEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileIpAddrTypeAvailEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileIpAddrTypeAvail
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileIpAddrTypeAvailName }
|
|
::={ configAnqpProfileIpAddrTypeAvailTable 1 }
|
|
|
|
ConfigAnqpProfileIpAddrTypeAvailEntry ::=
|
|
SEQUENCE {
|
|
configProfileIpAddrTypeAvailName OCTET STRING
|
|
,configProfileIpAddrTypeAvailRowStatus RowStatus
|
|
,configProfileIpAddrTypeAvailDesc OCTET STRING
|
|
,configIpv4Type INTEGER
|
|
,configIpv6Type INTEGER
|
|
}
|
|
|
|
configProfileIpAddrTypeAvailName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileIpAddrTypeAvailEntry 1 }
|
|
|
|
configProfileIpAddrTypeAvailRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileIpAddrTypeAvailEntry 2 }
|
|
|
|
configProfileIpAddrTypeAvailDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileIpAddrTypeAvailEntry 3 }
|
|
|
|
configIpv4Type OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IPv4 address availability."
|
|
::= { configAnqpProfileIpAddrTypeAvailEntry 4 }
|
|
|
|
configIpv6Type OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "IPv6 address availability."
|
|
::= { configAnqpProfileIpAddrTypeAvailEntry 5 }
|
|
|
|
configAnqpProfileDomainNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileDomainNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileDomainNameTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 6 }
|
|
|
|
configAnqpProfileDomainNameEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileDomainNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileDomainName
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileDomainNameName }
|
|
::={ configAnqpProfileDomainNameTable 1 }
|
|
|
|
ConfigAnqpProfileDomainNameEntry ::=
|
|
SEQUENCE {
|
|
configProfileDomainNameName OCTET STRING
|
|
,configProfileDomainNameRowStatus RowStatus
|
|
,configProfileDomainNameDesc OCTET STRING
|
|
,configDomainNameList OCTET STRING
|
|
}
|
|
|
|
configProfileDomainNameName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileDomainNameEntry 1 }
|
|
|
|
configProfileDomainNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileDomainNameEntry 2 }
|
|
|
|
configProfileDomainNameDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileDomainNameEntry 3 }
|
|
|
|
configDomainNameList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Domain name list."
|
|
::= { configAnqpProfileDomainNameEntry 4 }
|
|
|
|
configAnqpProfile3gppCellNetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfile3gppCellNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfile3gppCellNetTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 7 }
|
|
|
|
configAnqpProfile3gppCellNetEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfile3gppCellNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfile3gppCellNet
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfile3gppCellNetName }
|
|
::={ configAnqpProfile3gppCellNetTable 1 }
|
|
|
|
ConfigAnqpProfile3gppCellNetEntry ::=
|
|
SEQUENCE {
|
|
configProfile3gppCellNetName OCTET STRING
|
|
,configProfile3gppCellNetRowStatus RowStatus
|
|
,configProfile3gppCellNetDesc OCTET STRING
|
|
,config3gppCellNetList OCTET STRING
|
|
}
|
|
|
|
configProfile3gppCellNetName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfile3gppCellNetEntry 1 }
|
|
|
|
configProfile3gppCellNetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfile3gppCellNetEntry 2 }
|
|
|
|
configProfile3gppCellNetDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfile3gppCellNetEntry 3 }
|
|
|
|
config3gppCellNetList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "3GPP Cell Net list, MCC1:MNC1;MCC2:MNC2..."
|
|
::= { configAnqpProfile3gppCellNetEntry 4 }
|
|
|
|
configAnqpProfileNaiRealmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileNaiRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileNaiRealmTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 8 }
|
|
|
|
configAnqpProfileNaiRealmEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileNaiRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileNaiRealm
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileNaiRealmName }
|
|
::={ configAnqpProfileNaiRealmTable 1 }
|
|
|
|
ConfigAnqpProfileNaiRealmEntry ::=
|
|
SEQUENCE {
|
|
configProfileNaiRealmName OCTET STRING
|
|
,configProfileNaiRealmRowStatus RowStatus
|
|
,configProfileNaiRealmDesc OCTET STRING
|
|
,configNaiRealmEncode DisableEnable
|
|
,configNaiRealmRealmList OCTET STRING
|
|
,configNaiRealmEap OCTET STRING
|
|
}
|
|
|
|
configProfileNaiRealmName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileNaiRealmEntry 1 }
|
|
|
|
configProfileNaiRealmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileNaiRealmEntry 2 }
|
|
|
|
configProfileNaiRealmDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileNaiRealmEntry 3 }
|
|
|
|
configNaiRealmEncode OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "NAI Realm Encode"
|
|
::= { configAnqpProfileNaiRealmEntry 4 }
|
|
|
|
configNaiRealmRealmList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "NAI Realm list"
|
|
::= { configAnqpProfileNaiRealmEntry 5 }
|
|
|
|
configNaiRealmEap OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "NAI Real EAP"
|
|
::= { configAnqpProfileNaiRealmEntry 6 }
|
|
|
|
configAnqpProfileOverrideElementTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigAnqpProfileOverrideElementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileOverrideElementTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 9 }
|
|
|
|
configAnqpProfileOverrideElementEntry OBJECT-TYPE
|
|
SYNTAX ConfigAnqpProfileOverrideElementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configAnqpProfileOverrideElement
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileOverrideElementName }
|
|
::={ configAnqpProfileOverrideElementTable 1 }
|
|
|
|
ConfigAnqpProfileOverrideElementEntry ::=
|
|
SEQUENCE {
|
|
configProfileOverrideElementName OCTET STRING
|
|
,configProfileOverrideElementRowStatus RowStatus
|
|
,configProfileOverrideElementDesc OCTET STRING
|
|
,configAnqpOverrideList OCTET STRING
|
|
}
|
|
|
|
configProfileOverrideElementName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configAnqpProfileOverrideElementEntry 1 }
|
|
|
|
configProfileOverrideElementRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configAnqpProfileOverrideElementEntry 2 }
|
|
|
|
configProfileOverrideElementDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configAnqpProfileOverrideElementEntry 3 }
|
|
|
|
configAnqpOverrideList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "ANQP override element list."
|
|
::= { configAnqpProfileOverrideElementEntry 4 }
|
|
|
|
configHS20ProfileOperFriendlyNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigHS20ProfileOperFriendlyNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileOperFriendlyNameTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 10 }
|
|
|
|
configHS20ProfileOperFriendlyNameEntry OBJECT-TYPE
|
|
SYNTAX ConfigHS20ProfileOperFriendlyNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileOperFriendlyName
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileOperFriendlyNameName }
|
|
::={ configHS20ProfileOperFriendlyNameTable 1 }
|
|
|
|
ConfigHS20ProfileOperFriendlyNameEntry ::=
|
|
SEQUENCE {
|
|
configProfileOperFriendlyNameName OCTET STRING
|
|
,configProfileOperFriendlyNameRowStatus RowStatus
|
|
,configProfileOperFriendlyNameDesc OCTET STRING
|
|
,configFriendlyNameList OCTET STRING
|
|
}
|
|
|
|
configProfileOperFriendlyNameName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configHS20ProfileOperFriendlyNameEntry 1 }
|
|
|
|
configProfileOperFriendlyNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configHS20ProfileOperFriendlyNameEntry 2 }
|
|
|
|
configProfileOperFriendlyNameDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configHS20ProfileOperFriendlyNameEntry 3 }
|
|
|
|
configFriendlyNameList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "List of friendly name. Format: [language 1 code]:[name 1 string];[language 2 code]:[name 2 string]"
|
|
::= { configHS20ProfileOperFriendlyNameEntry 4 }
|
|
|
|
configHS20ProfileConnCapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigHS20ProfileConnCapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileConnCapTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 11 }
|
|
|
|
configHS20ProfileConnCapEntry OBJECT-TYPE
|
|
SYNTAX ConfigHS20ProfileConnCapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileConnCap
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileConnCapName }
|
|
::={ configHS20ProfileConnCapTable 1 }
|
|
|
|
ConfigHS20ProfileConnCapEntry ::=
|
|
SEQUENCE {
|
|
configProfileConnCapName OCTET STRING
|
|
,configProfileConnCapRowStatus RowStatus
|
|
,configProfileConnCapDesc OCTET STRING
|
|
,configConnCapabList OCTET STRING
|
|
}
|
|
|
|
configProfileConnCapName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configHS20ProfileConnCapEntry 1 }
|
|
|
|
configProfileConnCapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configHS20ProfileConnCapEntry 2 }
|
|
|
|
configProfileConnCapDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configHS20ProfileConnCapEntry 3 }
|
|
|
|
configConnCapabList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Connection capability list."
|
|
::= { configHS20ProfileConnCapEntry 4 }
|
|
|
|
configHS20ProfileWanMetricsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigHS20ProfileWanMetricsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileWanMetricsTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 12 }
|
|
|
|
configHS20ProfileWanMetricsEntry OBJECT-TYPE
|
|
SYNTAX ConfigHS20ProfileWanMetricsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileWanMetrics
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileWanMetricsName }
|
|
::={ configHS20ProfileWanMetricsTable 1 }
|
|
|
|
ConfigHS20ProfileWanMetricsEntry ::=
|
|
SEQUENCE {
|
|
configProfileWanMetricsName OCTET STRING
|
|
,configProfileWanMetricsRowStatus RowStatus
|
|
,configProfileWanMetricsDesc OCTET STRING
|
|
,configLinkStatus INTEGER
|
|
,configSymmetric DisableEnable
|
|
,configAtCapacity DisableEnable
|
|
,configDownSpeed INTEGER
|
|
,configUpSpeed INTEGER
|
|
,configDownLoad INTEGER
|
|
,configUpLoad INTEGER
|
|
,configLMD INTEGER
|
|
}
|
|
|
|
configProfileWanMetricsName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configHS20ProfileWanMetricsEntry 1 }
|
|
|
|
configProfileWanMetricsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configHS20ProfileWanMetricsEntry 2 }
|
|
|
|
configProfileWanMetricsDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configHS20ProfileWanMetricsEntry 3 }
|
|
|
|
configLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Link status."
|
|
::= { configHS20ProfileWanMetricsEntry 4 }
|
|
|
|
configSymmetric OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Link symmetric."
|
|
::= { configHS20ProfileWanMetricsEntry 5 }
|
|
|
|
configAtCapacity OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Link at capacity."
|
|
::= { configHS20ProfileWanMetricsEntry 6 }
|
|
|
|
configDownSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Down link speed in kbps."
|
|
::= { configHS20ProfileWanMetricsEntry 7 }
|
|
|
|
configUpSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Up link speed in kbps."
|
|
::= { configHS20ProfileWanMetricsEntry 8 }
|
|
|
|
configDownLoad OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Current load of downlink WAN connection in percentage."
|
|
::= { configHS20ProfileWanMetricsEntry 9 }
|
|
|
|
configUpLoad OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Current load of uplink WAN connection in percentage."
|
|
::= { configHS20ProfileWanMetricsEntry 10 }
|
|
|
|
configLMD OBJECT-TYPE
|
|
SYNTAX INTEGER MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Duration for measuring downlink/uplink load in millisecond; 0 if load cannot be determined."
|
|
::= { configHS20ProfileWanMetricsEntry 11 }
|
|
|
|
configHS20ProfileOperClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigHS20ProfileOperClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileOperClassTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 13 }
|
|
|
|
configHS20ProfileOperClassEntry OBJECT-TYPE
|
|
SYNTAX ConfigHS20ProfileOperClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileOperClass
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileOperClassName }
|
|
::={ configHS20ProfileOperClassTable 1 }
|
|
|
|
ConfigHS20ProfileOperClassEntry ::=
|
|
SEQUENCE {
|
|
configProfileOperClassName OCTET STRING
|
|
,configProfileOperClassRowStatus RowStatus
|
|
,configProfileOperClassDesc OCTET STRING
|
|
,configOperClassList OCTET STRING
|
|
}
|
|
|
|
configProfileOperClassName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configHS20ProfileOperClassEntry 1 }
|
|
|
|
configProfileOperClassRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configHS20ProfileOperClassEntry 2 }
|
|
|
|
configProfileOperClassDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configHS20ProfileOperClassEntry 3 }
|
|
|
|
configOperClassList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Operating class list"
|
|
::= { configHS20ProfileOperClassEntry 4 }
|
|
|
|
configHS20ProfileOsuProviderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigHS20ProfileOsuProviderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileOsuProviderTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 14 }
|
|
|
|
configHS20ProfileOsuProviderEntry OBJECT-TYPE
|
|
SYNTAX ConfigHS20ProfileOsuProviderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configHS20ProfileOsuProvider
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileOsuProviderName }
|
|
::={ configHS20ProfileOsuProviderTable 1 }
|
|
|
|
ConfigHS20ProfileOsuProviderEntry ::=
|
|
SEQUENCE {
|
|
configProfileOsuProviderName OCTET STRING
|
|
,configProfileOsuProviderRowStatus RowStatus
|
|
,configProfileOsuProviderDesc OCTET STRING
|
|
,configOsuServerUri OCTET STRING
|
|
,configOsuFriendlyNameList OCTET STRING
|
|
,configOsuNai OCTET STRING
|
|
,configOsuOmaDm DisableEnable
|
|
,configOsuSoapXml DisableEnable
|
|
,configOsuIconProfileList OCTET STRING
|
|
,configOsuServiceDescList OCTET STRING
|
|
}
|
|
|
|
configProfileOsuProviderName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configHS20ProfileOsuProviderEntry 1 }
|
|
|
|
configProfileOsuProviderRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configHS20ProfileOsuProviderEntry 2 }
|
|
|
|
configProfileOsuProviderDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configHS20ProfileOsuProviderEntry 3 }
|
|
|
|
configOsuServerUri OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "OSU server URI."
|
|
::= { configHS20ProfileOsuProviderEntry 4 }
|
|
|
|
configOsuFriendlyNameList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "OSU provider friendly name list."
|
|
::= { configHS20ProfileOsuProviderEntry 5 }
|
|
|
|
configOsuNai OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "OSU NAI."
|
|
::= { configHS20ProfileOsuProviderEntry 6 }
|
|
|
|
configOsuOmaDm OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Support OMA DM(Open Mobile Alliance Device Management)."
|
|
::= { configHS20ProfileOsuProviderEntry 7 }
|
|
|
|
configOsuSoapXml OBJECT-TYPE
|
|
SYNTAX DisableEnable MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Supoort SOAP(Simple Object Access Protocol) XML."
|
|
::= { configHS20ProfileOsuProviderEntry 8 }
|
|
|
|
configOsuIconProfileList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Icon profile list."
|
|
::= { configHS20ProfileOsuProviderEntry 9 }
|
|
|
|
configOsuServiceDescList OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Service description list."
|
|
::= { configHS20ProfileOsuProviderEntry 10 }
|
|
|
|
|
|
configProfileIconTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigProfileIconEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configProfileIconTable
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
::= { sc-passpoint 15 }
|
|
|
|
configProfileIconEntry OBJECT-TYPE
|
|
SYNTAX ConfigProfileIconEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "List of configProfileIcon
|
|
[FW:E2148.AC.1:X.XX.X.X]"
|
|
INDEX { configProfileIconName }
|
|
::={ configProfileIconTable 1 }
|
|
|
|
ConfigProfileIconEntry ::=
|
|
SEQUENCE {
|
|
configProfileIconName OCTET STRING
|
|
,configProfileIconRowStatus RowStatus
|
|
,configProfileIconDesc OCTET STRING
|
|
,configIconLang OCTET STRING
|
|
,configIconSize OCTET STRING
|
|
,configIconType OCTET STRING
|
|
,configIconPath OCTET STRING
|
|
,configIconFileContent OCTET STRING
|
|
}
|
|
|
|
configProfileIconName OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "profile name, which will be referred in passpoint config."
|
|
::= { configProfileIconEntry 1 }
|
|
|
|
configProfileIconRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus MAX-ACCESS read-create STATUS current
|
|
DESCRIPTION "row addition/deletion support"
|
|
::= { configProfileIconEntry 2 }
|
|
|
|
configProfileIconDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "profile description."
|
|
::= { configProfileIconEntry 3 }
|
|
|
|
configIconLang OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Language in which the icon will be shown."
|
|
::= { configProfileIconEntry 4 }
|
|
|
|
configIconSize OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "Icon size in pixel. <Icon Width>:<Icon Height>"
|
|
::= { configProfileIconEntry 5 }
|
|
|
|
configIconType OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "MIME type of the icon file."
|
|
::= { configProfileIconEntry 6 }
|
|
|
|
configIconPath OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current
|
|
DESCRIPTION "Internal path of icon file."
|
|
::= { configProfileIconEntry 7 }
|
|
|
|
configIconFileContent OBJECT-TYPE
|
|
SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current
|
|
DESCRIPTION "File content encoded in base64"
|
|
::= { configProfileIconEntry 8 }
|
|
-- Service Passpoint }
|
|
|
|
-- async sysupgrade {
|
|
|
|
configAsyncUpgradeDoUpgrade OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
execute(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Execute system upgrade immediately if there is a valid firmware uploaded.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-async-sysupgrade 1 }
|
|
|
|
configAsyncUpgradeTimerEnable OBJECT-TYPE
|
|
SYNTAX DisableEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / disable the timer for system upgrade.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-async-sysupgrade 2 }
|
|
|
|
configAsyncUpgradeTimerMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no-retry(1),
|
|
retry-immediately(2),
|
|
retry-after-24h(3),
|
|
missed-upgrade-retry-after-24h(100)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Current timer mode. (Mode [Repeating-applied] cannot be set, it's get-only.)
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-async-sysupgrade 3 }
|
|
|
|
configAsyncUpgradeTimerMinute OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set minutes after [apply], system upgrade will be performed.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { sc-async-sysupgrade 4 }
|
|
|
|
-- async sysupgrade }
|
|
|
|
-- serviceConfiguration (config files state) }
|
|
|
|
-- ===========================================
|
|
-- notifications (SNMP traps) {
|
|
--
|
|
notification OBJECT IDENTIFIER ::= { acksys 11 }
|
|
|
|
linkAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "Ethernet or Wi-Fi link alarm (up or down)
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 1 }
|
|
|
|
powerAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "Power supply alarm. Only on products with 2 power supplies
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 3 }
|
|
|
|
digitalInputAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "Digital input alarm. Only on products with digital input
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 4 }
|
|
|
|
tempExceededAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "Temperature alarm. The temperature exceeds the given trigger
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 5 }
|
|
|
|
clientLinkAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbClientMacAddress, nbSsid, nbBssid, nbEventState, nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "In AP mode, client was connected / disconnected
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 6 }
|
|
|
|
vrrpAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "VRRP state change
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 7 }
|
|
|
|
dfsAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "DFS alarm
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 8 }
|
|
|
|
pingerAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "Notified if the hostname do not respond to the ping
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notification 9 }
|
|
|
|
tcnAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "TCN state change alarm"
|
|
::= { notification 11 }
|
|
|
|
securityAlarm NOTIFICATION-TYPE
|
|
OBJECTS { nbEventName }
|
|
STATUS current
|
|
DESCRIPTION "Security-related alarm"
|
|
::= { notification 12 }
|
|
|
|
-- notifications (SNMP traps) }
|
|
-- ===========================================
|
|
-- notificationBindings (SNMP traps) variables bound in notifications {
|
|
--
|
|
notificationBindings OBJECT IDENTIFIER ::= { notification 255 }
|
|
|
|
nbClientMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "MAC address of the client connected to the AP.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 1 }
|
|
|
|
nbSsid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..33))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "The SSID for which the trap was triggered
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 2 }
|
|
|
|
nbBssid OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "The BSSID for which the trap was triggered
|
|
Warning, a 17-bytes column-separated string may
|
|
be returned with this OID.
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 3 }
|
|
|
|
nbEventState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Notification state. Currently, possible values are 'up', 'down',
|
|
'connect', 'disconnect', 'DFS_CAC_STARTED', 'DFS_CAC_FINISHED',
|
|
'DFS_CAC_ABORTED', 'DFS_RADAR_DETECTED', 'DFS_NOP_FINISHED'
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 4 }
|
|
|
|
nbEventName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "User-provided name of the event trigger in the product configuration database
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 5 }
|
|
|
|
nbRadioName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Radio card name
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 6 }
|
|
|
|
nbRadioMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Radio card Mac address
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 7 }
|
|
|
|
nbRadioChannel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Current Radio channel
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 8 }
|
|
|
|
nbRadioChannelWidth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Current Radio channel width in Mhz
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 9 }
|
|
|
|
nbRadarChannel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Current Radar channel
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 10 }
|
|
|
|
nbRadarChannelWidth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Current Radar channel width in Mhz
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 11 }
|
|
|
|
nbHostName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Host name of the equipment that triggered an event on the product
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { notificationBindings 12 }
|
|
|
|
nbDigitalInName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Digital input name
|
|
[FW:E2148.AC.1:3.16.0.1]"
|
|
::= { notificationBindings 13 }
|
|
|
|
nbTcnTaiIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN Ip address of ETBN train application interface"
|
|
::= { notificationBindings 14 }
|
|
|
|
nbTcnEtbnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initConfig(3),
|
|
notInaugurated(4),
|
|
readyForInauguration(5),
|
|
tndValidated(6),
|
|
inaugurating(7),
|
|
initServices(8),
|
|
inaugurated(9),
|
|
interConsistOperational(10),
|
|
tndPendingRemoval(11)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN ETBN status"
|
|
::= { notificationBindings 15 }
|
|
|
|
nbTcnEtbnRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
master(1),
|
|
backup(2),
|
|
notRedundant(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN ETBN role"
|
|
::= { notificationBindings 16 }
|
|
|
|
nbTcnEtbnTopoCnt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN CRC32 of the discovered train network directory"
|
|
::= { notificationBindings 17 }
|
|
|
|
nbTcnEtbTopoCntState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "ETB topology count validity state: if it is invalid,
|
|
this means that at least one ETB of the current Train
|
|
Network Directory has left current stable topology (removed
|
|
its TND) and has detected a different topology"
|
|
::= { notificationBindings 18 }
|
|
|
|
nbTcnLengtheningFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN lengthening flag"
|
|
::= { notificationBindings 19 }
|
|
|
|
nbTcnShorteningState OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN Shortening state"
|
|
::= { notificationBindings 20 }
|
|
|
|
nbTcnRadio1CouplingState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stopped(0),
|
|
scanning(1),
|
|
signalgood(2),
|
|
signalbad(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "TCN Radio coupling state"
|
|
::= { notificationBindings 21 }
|
|
|
|
nbTcnConsistCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Number of consists in the train"
|
|
::= { notificationBindings 22 }
|
|
|
|
nbTcnConsistPosition OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Consist position in the train"
|
|
::= { notificationBindings 23 }
|
|
|
|
nbDescription OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current
|
|
DESCRIPTION "Any available details about the event triggering the trap
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { notificationBindings 24 }
|
|
|
|
nbTimestamp OBJECT-TYPE
|
|
SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current
|
|
DESCRIPTION "Time of the event triggering the trap. Time is in seconds
|
|
since the Epoch (1/1/1970 00:00 UTC) - see POSIX Base Definitions.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { notificationBindings 25 }
|
|
|
|
nbMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current
|
|
DESCRIPTION "The BSSID for which the trap was triggered
|
|
Format is binary PhysAddr (contrary to nbBssid binding).
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { notificationBindings 26 }
|
|
|
|
nbSource OBJECT-TYPE
|
|
SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current
|
|
DESCRIPTION "A tag which identifies the origin of the event.
|
|
[FW:E2148.AC.1:4.16.0.1]"
|
|
::= { notificationBindings 27 }
|
|
|
|
-- notificationBindings (SNMP traps) }
|
|
|
|
acksysProductSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the product serial number
|
|
[FW:E2148.AC.1:2.8.0.1]"
|
|
::= { acksys 12 }
|
|
|
|
END
|