Observium_CE/mibs/accedian/ACD-DISCOVERY-MIB

512 lines
17 KiB
Plaintext

--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2011, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
ACD-DISCOVERY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Unsigned32 FROM SNMPv2-SMI
DisplayString, DateAndTime, MacAddress FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
acdMibs FROM ACCEDIAN-SMI;
acdDiscovery MODULE-IDENTITY
LAST-UPDATED "201210110100Z"
ORGANIZATION "Accedian Networks, Inc."
CONTACT-INFO
"Accedian Technical Assistance Center
Accedian Networks, Inc.
2351 Alfred-Nobel blvd., Suite N-410
Saint-Laurent, Quebec Canada H4S 2A9
E-mail: support@accedian.com"
DESCRIPTION
"The discovery inventory information for this Accedian Networks device."
REVISION "201210110100Z" -- 11 October 2012
DESCRIPTION
"Addition of MAC Address List table."
REVISION "201111010100Z" -- 1 November 2011
DESCRIPTION
"Addition of MAC Address List table."
REVISION "200810010100Z" -- 1 October 2008
DESCRIPTION
"Initial version of MIB module ACD-DISCOVERY-MIB."
::= { acdMibs 11 }
acdDiscoveryNotifications OBJECT IDENTIFIER ::= { acdDiscovery 0 }
acdDiscoveryMIBObjects OBJECT IDENTIFIER ::= { acdDiscovery 1 }
acdDiscoveryConformance OBJECT IDENTIFIER ::= { acdDiscovery 2 }
--
-- ACD Discovery MIB Objects
--
acdDiscoveryInventory OBJECT IDENTIFIER ::= { acdDiscoveryMIBObjects 1 }
-------------------------------------------------------------------------------
-- The discovery inventory table.
-- This table contains the information on all the NID neighbors.
-------------------------------------------------------------------------------
acdDiscoveryInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdDiscoveryInventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information on neighboring NIDs"
::= { acdDiscoveryInventory 1 }
acdDiscoveryInventoryEntry OBJECT-TYPE
SYNTAX AcdDiscoveryInventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inventory information."
INDEX { acdDiscoveryIndex }
::= { acdDiscoveryInventoryTable 1 }
AcdDiscoveryInventoryEntry ::= SEQUENCE {
acdDiscoveryIndex Unsigned32,
acdDiscoveryMgmtIpAddress IpAddress,
acdDiscoverySystemName DisplayString,
acdDiscoverySystemDesc DisplayString,
acdDiscoverySerialNumber DisplayString,
acdDiscoveryLastChange DateAndTime,
acdDiscoveryDomain DisplayString,
acdDiscoveryFirmware DisplayString,
acdDiscoveryBaseMacAddress MacAddress,
acdDiscoveryInterfaceMacAddress MacAddress,
acdDiscoveryChassisIdSubtype Unsigned32,
acdDiscoveryChassisId DisplayString,
acdDiscoveryLocalPortId DisplayString,
acdDiscoveryRemotePortId DisplayString,
acdDiscoveryWebServerPort Unsigned32,
acdDiscoverySnmpAgentPort Unsigned32,
acdDiscoverySshPort Unsigned32,
acdDiscoveryVlan1 Unsigned32,
acdDiscoveryVlan2 Unsigned32
}
acdDiscoveryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this acdDiscovery
entry."
::= { acdDiscoveryInventoryEntry 1 }
acdDiscoveryMgmtIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the management interface."
::= { acdDiscoveryInventoryEntry 2 }
acdDiscoverySystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An administratively-assigned name for this managed node."
::= { acdDiscoveryInventoryEntry 3 }
acdDiscoverySystemDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system description."
::= { acdDiscoveryInventoryEntry 4 }
acdDiscoverySerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the serial number of the unit."
::= { acdDiscoveryInventoryEntry 5 }
acdDiscoveryLastChange OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last time we received an information frame for the device."
::= { acdDiscoveryInventoryEntry 6 }
acdDiscoveryDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the discovery domain."
::= { acdDiscoveryInventoryEntry 7 }
acdDiscoveryFirmware OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware version of the unit."
::= { acdDiscoveryInventoryEntry 8 }
acdDiscoveryBaseMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The base MAC address of the remote NID based on the last information
frame received from the device. If no information has been received,
this object shall be equal to six octets of zero."
::= { acdDiscoveryInventoryEntry 9 }
acdDiscoveryInterfaceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management interface MAC address of the remote NID based on the
last information frame received from the device. If no information has
been received, this object shall be equal to six octets of zero."
::= { acdDiscoveryInventoryEntry 10 }
acdDiscoveryChassisIdSubtype OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis ID subtype, as defined by IEEE 802.1AB."
::= { acdDiscoveryInventoryEntry 11 }
acdDiscoveryChassisId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis ID of the remote device."
::= { acdDiscoveryInventoryEntry 12 }
acdDiscoveryLocalPortId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the port name where the advertisement frame was received."
::= { acdDiscoveryInventoryEntry 13 }
acdDiscoveryRemotePortId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the advertisement port of the remote device."
::= { acdDiscoveryInventoryEntry 14 }
acdDiscoveryWebServerPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The web server port of the remote device."
::= { acdDiscoveryInventoryEntry 15 }
acdDiscoverySnmpAgentPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNMP agent port of the remote device. If 0, SNMP agent is disabled."
::= { acdDiscoveryInventoryEntry 16 }
acdDiscoverySshPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SSH port of the remote device."
::= { acdDiscoveryInventoryEntry 17 }
acdDiscoveryVlan1 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first VLAN on the remote device interface. No VLAN when this value is zero."
::= { acdDiscoveryInventoryEntry 18 }
acdDiscoveryVlan2 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second VLAN on the remote device interface. No VLAN when this value is zero."
::= { acdDiscoveryInventoryEntry 19 }
---------------------------------------------------------------------------
-- The IP interface table
-- This table contains all interfaces found on the remote device, excluding the
-- management interface, which was configured by a beacon frame.
---------------------------------------------------------------------------
acdDiscoveryIpListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdDiscoveryIpListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all interfaces found on the remote device, excluding the
management interface, which was configured by a beacon frame."
::= { acdDiscoveryInventory 2 }
acdDiscoveryIpListEntry OBJECT-TYPE
SYNTAX AcdDiscoveryIpListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of the IP address of an interface on the remote device."
INDEX { acdDiscoveryIndex, acdDiscoveryIpListIndex }
::= { acdDiscoveryIpListTable 1 }
AcdDiscoveryIpListEntry ::= SEQUENCE {
acdDiscoveryIpListIndex Unsigned32,
acdDiscoveryIpListAddress IpAddress
}
acdDiscoveryIpListIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each row. Based on number of interface found."
::= { acdDiscoveryIpListEntry 1 }
acdDiscoveryIpListAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the IP address on one of the interfaces found on the remote NID."
::= { acdDiscoveryIpListEntry 2 }
---------------------------------------------------------------------------
-- The port MAC address table.
-- This table contains MAC address or ports found on the remote device.
-- For a first phase, only the MAC addresses for ports of a line cards in
-- a MetroNODE chassis are listed. Eventually, we may add to the list the
-- MAC address of all available ports including those of a MetroNID and
-- those of a controller card of a MetroNODE.
---------------------------------------------------------------------------
acdDiscoveryMacAddressListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdDiscoveryMacAddressListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC addresses of ports found on the remote device. Not
all port MAC addresses are necessary listed."
::= { acdDiscoveryInventory 3 }
acdDiscoveryMacAddressListEntry OBJECT-TYPE
SYNTAX AcdDiscoveryMacAddressListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of the MAC address of a port on the remote device."
INDEX { acdDiscoveryIndex, acdDiscoveryMacAddressListIndex }
::= { acdDiscoveryMacAddressListTable 1 }
AcdDiscoveryMacAddressListEntry ::= SEQUENCE {
acdDiscoveryMacAddressListIndex Unsigned32,
acdDiscoveryMacAddressListSystemSlotId Unsigned32,
acdDiscoveryMacAddressListPortId Unsigned32,
acdDiscoveryMacAddressListPortName DisplayString,
acdDiscoveryMacAddressListPortMacAddress MacAddress
}
acdDiscoveryMacAddressListIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each row. Based on number of port MAC addresses found."
::= { acdDiscoveryMacAddressListEntry 1 }
acdDiscoveryMacAddressListSystemSlotId OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System slot identifier of module on which the port is located.
Applies only to a MetroNODE module. Value is 0 for a MetroNID device."
::= { acdDiscoveryMacAddressListEntry 2 }
acdDiscoveryMacAddressListPortId OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port identifier."
::= { acdDiscoveryMacAddressListEntry 3 }
acdDiscoveryMacAddressListPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port name."
::= { acdDiscoveryMacAddressListEntry 4 }
acdDiscoveryMacAddressListPortMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC address of one of the ports found on the remote device."
::= { acdDiscoveryMacAddressListEntry 5 }
acdDiscoveryInventoryInserts OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular device has been inserted into the
inventory database.
This counter should be incremented only once after the
complete set of information is successfully recorded
in the inventory database."
::= { acdDiscoveryInventory 4 }
acdDiscoveryInventoryAgeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular device has been deleted from the
inventory database because the information timeliness interval
has expired.
This counter should be incremented only once when the complete
set of information is completely invalidated (aged out)."
::= { acdDiscoveryInventory 5 }
acdDiscoveryInventoryChange NOTIFICATION-TYPE
OBJECTS { acdDiscoveryInventoryInserts,
acdDiscoveryInventoryAgeouts
}
STATUS current
DESCRIPTION
"The SNMP notification generated when a change is detected in the
inventory database."
::= { acdDiscoveryNotifications 1 }
--
-- ***********************************************************
--
-- D I S C O V E R Y M I B C O N F O R M A N C E
--
-- ***********************************************************
--
-- ACD-DISCOVERY-MIB Module - Conformance Information
acdDiscoveryCompliances OBJECT IDENTIFIER ::= { acdDiscoveryConformance 1 }
acdDiscoveryGroups OBJECT IDENTIFIER ::= { acdDiscoveryConformance 2 }
---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------
acdDiscoveryInventoryGroup OBJECT-GROUP
OBJECTS {
acdDiscoveryMgmtIpAddress,
acdDiscoverySystemName,
acdDiscoverySystemDesc,
acdDiscoverySerialNumber,
acdDiscoveryLastChange,
acdDiscoveryDomain,
acdDiscoveryFirmware,
acdDiscoveryBaseMacAddress,
acdDiscoveryInterfaceMacAddress,
acdDiscoveryChassisIdSubtype,
acdDiscoveryChassisId,
acdDiscoveryLocalPortId,
acdDiscoveryRemotePortId,
acdDiscoveryWebServerPort,
acdDiscoverySnmpAgentPort,
acdDiscoverySshPort,
acdDiscoveryVlan1,
acdDiscoveryVlan2,
acdDiscoveryInventoryInserts,
acdDiscoveryInventoryAgeouts
}
STATUS current
DESCRIPTION
"."
::= { acdDiscoveryGroups 1 }
acdDiscoveryIpListGroup OBJECT-GROUP
OBJECTS {
acdDiscoveryIpListAddress
}
STATUS current
DESCRIPTION
"."
::= { acdDiscoveryGroups 2 }
acdDiscoveryMacAddressListGroup OBJECT-GROUP
OBJECTS {
acdDiscoveryMacAddressListSystemSlotId,
acdDiscoveryMacAddressListPortId,
acdDiscoveryMacAddressListPortName,
acdDiscoveryMacAddressListPortMacAddress
}
STATUS current
DESCRIPTION
"."
::= { acdDiscoveryGroups 3 }
acdDiscoveryNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
acdDiscoveryInventoryChange
}
STATUS current
DESCRIPTION
"Objects for the Inventory Notifications group."
::= { acdDiscoveryGroups 4 }
acdDiscoveryCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the ACD-DISCOVERY-MIB module."
MODULE
MANDATORY-GROUPS {
acdDiscoveryInventoryGroup,
acdDiscoveryIpListGroup,
acdDiscoveryMacAddressListGroup,
acdDiscoveryNotificationsGroup
}
::= { acdDiscoveryCompliances 1 }
END