470 lines
16 KiB
Plaintext
470 lines
16 KiB
Plaintext
-- ------------------------------------------------------------
|
|
-- HERCULES FastIP MIB - v1.0 30/04/98
|
|
-- ------------------------------------------------------------
|
|
-- Copyright (c) 3Com Corporation. All Rights Reserved.
|
|
-- ------------------------------------------------------------
|
|
|
|
A3COM00xx-BRIDGE-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
MacAddress, Timeout, dot1dBasePort
|
|
FROM BRIDGE-MIB
|
|
a3ComBridgeExt
|
|
FROM A3COM0004-GENERIC ;
|
|
|
|
-- ------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- ------------------------------------------------------------
|
|
|
|
PortList ::= OCTET STRING -- Each octet within this value
|
|
-- specifies a set of eight
|
|
-- ports, with the first octet specifying ports 1 through 8,
|
|
-- the second octet specifying ports 9 through 16, etc. Within
|
|
-- each octet, the most significant bit represents the lowest
|
|
-- numbered port, and the least significant bit represents the
|
|
-- highest numbered port. Thus, each port of the bridge is
|
|
-- represented by a single bit within the value of this object.
|
|
-- If that bit has a value of '1' then that port is included in
|
|
-- the set of ports; the port is not included if its bit has a
|
|
-- value of '0'. The default value of this object is a string
|
|
-- of ones of appropriate length.
|
|
|
|
-- ------------------------------------------------------------
|
|
-- groups in the 3Com Bridge-Extensions MIB
|
|
-- ------------------------------------------------------------
|
|
|
|
-- a3ComBridgeExt OBJECT IDENTIFIER ::= { generic 36 }
|
|
|
|
a3ComDot1dExtended OBJECT IDENTIFIER ::= { a3ComBridgeExt 1 }
|
|
a3ComDot1qVlan OBJECT IDENTIFIER ::= { a3ComBridgeExt 2 }
|
|
|
|
a3ComDot1dExtBase OBJECT IDENTIFIER ::= { a3ComDot1dExtended 1 }
|
|
a3ComDot1dGarp OBJECT IDENTIFIER ::= { a3ComDot1dExtended 2 }
|
|
a3ComPriority OBJECT IDENTIFIER ::= { a3ComDot1dExtended 3 }
|
|
a3ComNeighbour OBJECT IDENTIFIER ::= { a3ComDot1dExtended 4 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- the a3ComDot1dExtBase group
|
|
-- ------------------------------------------------------------
|
|
|
|
a3ComDot1dGmrpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value enabled(1) indicates that GMRP is enabled
|
|
on this device, for all ports, in all VLANs, for
|
|
which it has not been specifically disabled, if GARP
|
|
is also enabled for this device. When disabled(2),
|
|
GMRP is disabled for all ports, in all VLANs. The
|
|
default value is disabled(2)."
|
|
::= { a3ComDot1dExtBase 1 }
|
|
|
|
a3ComDot1dGvrpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value enabled(1) indicates that GVRP is enabled
|
|
on this device, for all ports for which it has not
|
|
been specifically disabled, if GARP is also enabled
|
|
for this device. When disabled(2), GVRP is
|
|
disabled for all ports on this device. The default
|
|
value is disabled(2)."
|
|
::= { a3ComDot1dExtBase 2 }
|
|
|
|
a3ComGarpJoinTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The GARP Join Timer interval, in units of 1/100th
|
|
of a second, for all ports on this device. The
|
|
default value is 20 centiseconds."
|
|
::= { a3ComDot1dExtBase 3 }
|
|
|
|
a3ComGarpLeaveTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The GARP Leave Timer interval, in units of 1/100th
|
|
of a second, for all ports on this device. The
|
|
default value is 60 centiseconds."
|
|
::= { a3ComDot1dExtBase 4 }
|
|
|
|
a3ComGarpLeaveAllTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The GARP LeaveAll Timer interval, in units of
|
|
1/100th of a second, for all ports on this device.
|
|
The default value is 1000 centiseconds."
|
|
::= { a3ComDot1dExtBase 5 }
|
|
|
|
a3ComSingleFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value enabled(1) indicates that the bridge is
|
|
operating with a single Filtering Database. When
|
|
disabled(2), the bridge is operating with independent
|
|
Filtering Databases for each VLAN. This value must
|
|
be enabled(1) and GVRP must be enabled, to support
|
|
3Com FastIP. The default value is disabled(2)."
|
|
::= { a3ComDot1dExtBase 6 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- the a3ComDot1dGarp group
|
|
-- ------------------------------------------------------------
|
|
|
|
-- ------------------------------------------------------------
|
|
-- The GARP, GMRP and GVRP Port Configuration Table
|
|
-- ------------------------------------------------------------
|
|
|
|
a3ComPortGarpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPortGarpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of GARP, GMRP and GVRP control information
|
|
about every bridge port on this device."
|
|
::= { a3ComDot1dGarp 1 }
|
|
|
|
a3ComPortGarpEntry OBJECT-TYPE
|
|
SYNTAX A3ComPortGarpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"GARP control information for a bridge port."
|
|
INDEX { dot1dBasePort }
|
|
::= { a3ComPortGarpTable 1 }
|
|
|
|
A3ComPortGarpEntry ::=
|
|
SEQUENCE {
|
|
a3ComPortGmrpAdminStatus
|
|
INTEGER,
|
|
a3ComPortGmrpOperStatus
|
|
INTEGER,
|
|
a3ComPortGvrpAdminStatus
|
|
INTEGER,
|
|
a3ComPortGvrpOperStatus
|
|
INTEGER
|
|
}
|
|
|
|
a3ComPortGmrpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
useDefault(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The administration state requested for GMRP on
|
|
this port. The value enabled(1) indicates that GMRP
|
|
should be enabled on this port, in all VLANs, if
|
|
GARP is also enabled for this port. The value
|
|
disabled(2), indicates that GMRP should be disabled
|
|
on this port, in all VLANs. The value useDefault(3)
|
|
indicates that GMRP should be enabled on this port,
|
|
in all VLANs, if GARP is enabled for this port, and
|
|
GMRP is also enabled for this device, defined by
|
|
a3ComGmrpOperStatus.
|
|
The default value is disabled(2)."
|
|
::= { a3ComPortGarpEntry 1 }
|
|
|
|
a3ComPortGmrpOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current operational status of GMRP on this
|
|
port."
|
|
::= { a3ComPortGarpEntry 2 }
|
|
|
|
a3ComPortGvrpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
useDefault(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The administration state requested for GVRP on
|
|
this port. The value enabled(1) indicates that GVRP
|
|
should be enabled on this port, if GARP is also
|
|
enabled for this port. The value disabled(2),
|
|
indicates that GVRP should be disabled on this port.
|
|
The value useDefault(3) indicates that GVRP should
|
|
be enabled on this port, if GARP is enabled for this
|
|
port, and GVRP is also enabled for this device,
|
|
defined by a3ComGvrpOperStatus.
|
|
The default value is disabled(2)."
|
|
::= { a3ComPortGarpEntry 3 }
|
|
|
|
a3ComPortGvrpOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current operational status of GVRP on this
|
|
port."
|
|
::= { a3ComPortGarpEntry 4 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- the a3ComDot1dPriority group
|
|
-- ------------------------------------------------------------
|
|
|
|
-- ------------------------------------------------------------
|
|
-- Bridge Priority Table
|
|
-- ------------------------------------------------------------
|
|
|
|
a3ComBridgePriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBridgePriorityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table mapping Incoming User Priority to Outbound
|
|
Access Priority."
|
|
::= { a3ComPriority 1 }
|
|
|
|
a3ComBridgePriorityEntry OBJECT-TYPE
|
|
SYNTAX A3ComBridgePriorityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User Priority to Traffic Class mapping."
|
|
INDEX { a3ComUserPriority }
|
|
::= { a3ComBridgePriorityTable 1 }
|
|
|
|
A3ComBridgePriorityEntry ::=
|
|
SEQUENCE {
|
|
a3ComUserPriority
|
|
INTEGER,
|
|
a3ComBridgePriority
|
|
INTEGER
|
|
}
|
|
|
|
a3ComUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user priority from incoming 802.1Q frames."
|
|
::= { a3ComBridgePriorityEntry 1 }
|
|
|
|
a3ComBridgePriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The transmit priority for outgoing frames."
|
|
::= { a3ComBridgePriorityEntry 2 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- the a3ComNeighbour group
|
|
-- ------------------------------------------------------------
|
|
|
|
-- ------------------------------------------------------------
|
|
-- The Port Neighbour Table
|
|
-- ------------------------------------------------------------
|
|
|
|
a3ComPortNeighbourTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPortNeighbourEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of Neighbour information for each port
|
|
on this device."
|
|
::= { a3ComNeighbour 1 }
|
|
|
|
a3ComPortNeighbourEntry OBJECT-TYPE
|
|
SYNTAX A3ComPortNeighbourEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Neighbour information for a port on this device."
|
|
INDEX { dot1dBasePort }
|
|
::= { a3ComPortNeighbourTable 1 }
|
|
|
|
A3ComPortNeighbourEntry ::=
|
|
SEQUENCE {
|
|
a3ComPortForwardUnknownVlans
|
|
INTEGER
|
|
}
|
|
|
|
a3ComPortForwardUnknownVlans OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is configured statically, by management.
|
|
The value true(1) indicates that traffic for unknown
|
|
VLANs should be forwarded to this port: e.g. the
|
|
neighbour is a switch or a router, that can process
|
|
traffic for VLANs not configured locally by this
|
|
device. The default value is false(2)."
|
|
::= { a3ComPortNeighbourEntry 1 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- the a3ComDot1qVlan group
|
|
-- ------------------------------------------------------------
|
|
|
|
-- ------------------------------------------------------------
|
|
-- The Static VLAN Database
|
|
-- This is in addition to VLAN creation using ifStackTable.
|
|
-- ------------------------------------------------------------
|
|
|
|
a3ComDot1qVlanStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComDot1qVlanStaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing static configuration information
|
|
for each VLAN configured into the bridge by (local
|
|
or network) management."
|
|
::= { a3ComDot1qVlan 1 }
|
|
|
|
a3ComDot1qVlanStaticEntry OBJECT-TYPE
|
|
SYNTAX A3ComDot1qVlanStaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Static information for a VLAN configured into the
|
|
bridge by (local or network) management."
|
|
INDEX { a3ComDot1qVlanId }
|
|
::= { a3ComDot1qVlanStaticTable 1 }
|
|
|
|
A3ComDot1qVlanStaticEntry ::=
|
|
SEQUENCE {
|
|
a3ComDot1qVlanId
|
|
INTEGER,
|
|
a3ComDot1qVlanForbiddenPorts
|
|
PortList
|
|
}
|
|
|
|
a3ComDot1qVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN identity for which this entry's static
|
|
information applies."
|
|
::= { a3ComDot1qVlanStaticEntry 1 }
|
|
|
|
a3ComDot1qVlanForbiddenPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of ports which are prohibited from joining
|
|
this VLAN by management."
|
|
::= { a3ComDot1qVlanStaticEntry 2 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- Dynamic Group Registration Table
|
|
-- ------------------------------------------------------------
|
|
|
|
a3ComDot1qTpGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComDot1qTpGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing filtering information for each
|
|
VLAN, configured into the bridge by (local or
|
|
network) management, or learnt by GMRP, specifying
|
|
the set of ports to which frames received on a
|
|
specific VLAN and containing a specific Group
|
|
destination address are allowed to be forwarded."
|
|
::= { a3ComDot1qVlan 2 }
|
|
|
|
a3ComDot1qTpGroupEntry OBJECT-TYPE
|
|
SYNTAX A3ComDot1qTpGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Filtering information configured into the bridge
|
|
by management, or learnt dynamically, specifying
|
|
the set of ports to which frames received on a
|
|
specific VLAN and containing a specific Group
|
|
destination address are allowed to be forwarded."
|
|
INDEX { a3ComDot1qVlanId, a3ComDot1qTpGroupAddress }
|
|
::= { a3ComDot1qTpGroupTable 1 }
|
|
|
|
A3ComDot1qTpGroupEntry ::=
|
|
SEQUENCE {
|
|
a3ComDot1qTpGroupAddress
|
|
MacAddress,
|
|
a3ComDot1qTpGroupAllowedToGoTo
|
|
PortList,
|
|
a3ComDot1qTpGroupGmrp
|
|
PortList,
|
|
a3ComDot1qTpGroupIgmp
|
|
PortList
|
|
}
|
|
|
|
a3ComDot1qTpGroupAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The destination Group MAC address in a frame to
|
|
which this entry's filtering information applies."
|
|
::= { a3ComDot1qTpGroupEntry 1 }
|
|
|
|
a3ComDot1qTpGroupAllowedToGoTo OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The complete set of ports in this VLAN, to which
|
|
frames destined for a specific Group MAC address,
|
|
are allowed to be forwarded."
|
|
::= { a3ComDot1qTpGroupEntry 2 }
|
|
|
|
a3ComDot1qTpGroupGmrp OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of ports learnt by the stated method, in
|
|
this VLAN, to which frames destined for a specific
|
|
Group MAC address, are allowed to be forwarded."
|
|
::= { a3ComDot1qTpGroupEntry 3 }
|
|
|
|
a3ComDot1qTpGroupIgmp OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of ports learnt by the stated method, in
|
|
this VLAN, to which frames destined for a specific
|
|
Group MAC address, are allowed to be forwarded."
|
|
::= { a3ComDot1qTpGroupEntry 4 }
|
|
|
|
END
|