Observium_CE/mibs/a3com/A3COM-HUAWEI-VOICE-CALL-HISTORY-MIB

503 lines
19 KiB
Plaintext

-- ==========================================================================
-- Copyright (C) 2004-2010 by H3C Technologies. All rights reserved.
--
-- Description: The purpose of this MIB file is to provide the definition of
-- voice call record.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 2008-02-17 Initial version, created by Tian Xiaoqiang, Qu Jin
-- V1.1 2009-12-09 Add g729br8 to "H3cCodecType", Wang Tong
-- ==========================================================================
A3COM-HUAWEI-VOICE-CALL-HISTORY-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Integer32, Gauge32
FROM SNMPv2-SMI
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
AbsoluteCounter32
FROM DIAL-CONTROL-MIB
TEXTUAL-CONVENTION, DisplayString, TimeStamp
FROM SNMPv2-TC
h3cVoice
FROM A3COM-HUAWEI-OID-MIB;
h3cVoCallHistory MODULE-IDENTITY
LAST-UPDATED "200802170000Z"
ORGANIZATION
"H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
Http://www.h3c.com
Zip:100085"
DESCRIPTION
"This MIB file is to provide the definition of voice call
history record information."
REVISION "200802170000Z"
DESCRIPTION
"The initial version of this MIB file."
::= { h3cVoice 16 }
-- ======================================
-- Type declaration
-- ======================================
H3cGUid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a global call identifier. The global call identifier is
used as a unique identifier for an end-to-end call. A zero length
H3cGUid indicates no value for the global call identifier."
SYNTAX OCTET STRING(SIZE(0..16))
H3cCodecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of Codec."
SYNTAX INTEGER
{
g711a(1),
g711u(2),
g723r53(3),
g723r63(4),
g729r8(5),
g729a(6),
g726r16(7),
g726r24(8),
g726r32(9),
g726r40(10),
unknown(11),
g729br8(12)
}
h3cVoiceCallHistoryObjects OBJECT IDENTIFIER ::= { h3cVoCallHistory 1 }
-- ===========================================================================
-- h3cCallHistoryTable
-- ===========================================================================
-- callHistoryTable
-- Table to store the past call information. The destination number
-- and the call connect and disconnect time, and the disconnection
-- cause are stored. These calls could be circuit switched or virtual
-- circuits. History of each and every call is stored, of successful
-- calls as well as of unsuccessful and rejected calls. An entry will
-- be created when a call is cleared.
h3cCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about specific
calls to a specific destination."
::= { h3cVoiceCallHistoryObjects 1 }
h3cCallHistoryEntry OBJECT-TYPE
SYNTAX H3cCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single connection."
INDEX { h3cCallHistoryIndex }
::= { h3cCallHistoryTable 1 }
H3cCallHistoryEntry ::=
SEQUENCE {
h3cCallHistoryIndex Integer32,
h3cCallHistorySetupTime TimeStamp,
h3cCallHistoryConnectTime TimeStamp,
h3cCallHistoryTerminateTime TimeStamp,
h3cCallHistoryPeerAddress DisplayString,
h3cCallHistoryPeerId Integer32,
h3cCallHistoryLogicalIfIndex InterfaceIndexOrZero,
h3cCallHistoryCallOrigin INTEGER,
h3cCallHistoryChargedUnits AbsoluteCounter32,
h3cCallHistoryInfoType INTEGER,
h3cCallHistoryTransmitPackets AbsoluteCounter32,
h3cCallHistoryTransmitBytes AbsoluteCounter32,
h3cCallHistoryReceivePackets AbsoluteCounter32,
h3cCallHistoryReceiveBytes AbsoluteCounter32
}
h3cCallHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the call history table. It's a monotonically
increasing integer for the sole purpose of indexing call
disconnection events. When it reaches to the maximum value,
the value will back to 1."
::= { h3cCallHistoryEntry 1 }
h3cCallHistorySetupTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was started."
::= { h3cCallHistoryEntry 2 }
h3cCallHistoryConnectTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was connected.
If the call is not connected, this object will have a
value of zero."
::= { h3cCallHistoryEntry 3 }
h3cCallHistoryTerminateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was terminated."
::= { h3cCallHistoryEntry 4 }
h3cCallHistoryPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number this call was connected to. If the number is
not available, it will have a length of zero."
::= { h3cCallHistoryEntry 5 }
h3cCallHistoryPeerId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a single peer. This is the Id value
of the peer table entry to which this call was made. If a
peer table entry for this call does not exist or is unknown,
the value of this object will be zero."
::= { h3cCallHistoryEntry 6 }
h3cCallHistoryLogicalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ifIndex value of the logical interface through
which this call was made. For ISDN media, this would be
the ifIndex of the B channel which was used for this call.
If the ifIndex value is unknown, the value of this object
will be zero."
::= { h3cCallHistoryEntry 7 }
h3cCallHistoryCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2),
callback(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call origin.
originate The call that is initiated.
answer The call that is accepted.
callback Either rejects the call and then calls back,
or uses the 'Reverse charging' information
element if it is available. Note that callback(3)
is supposed to control charging, not security,
and applies to callback prior to accepting a call.
Callback for security reasons can be handled using
PPP callback."
::= { h3cCallHistoryEntry 8 }
h3cCallHistoryChargedUnits OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero."
::= { h3cCallHistoryEntry 9 }
h3cCallHistoryInfoType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
speech(2),
unrestrictedDigital(3),
unrestrictedDigital56(4),
restrictedDigital(5),
audio31(6),
audio7(7),
video(8),
packetSwitched(9),
fax(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information type for this call.
other E.g. for non-isdn media.
speech Speech.
unrestrictedDigital Unrestricted digital information
with 64k rate adaption.
unrestrictedDigital56 Unrestricted digital information
with 56k rate adaption.
restrictedDigital Restricted digital information.
audio31 3.1 kHz audio.
audio7 7 kHz audio.
video Video.
packetSwitched Packetswitch.
fax Fax."
::= { h3cCallHistoryEntry 10 }
h3cCallHistoryTransmitPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were transmitted while this
call was active."
::= { h3cCallHistoryEntry 11 }
h3cCallHistoryTransmitBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were transmitted for this call."
::= { h3cCallHistoryEntry 12 }
h3cCallHistoryReceivePackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were received for this call."
::= { h3cCallHistoryEntry 13 }
h3cCallHistoryReceiveBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were received for this call."
::= { h3cCallHistoryEntry 14 }
-- ===========================================================================
-- h3cVoiceCallHistoryTable
-- ===========================================================================
h3cVoiceCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cVoiceCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the voice extension to the call history table
of DIAL-CONTROL-MIB. It contains voice encapsulation call
leg information that is derived from the statistics of lower
layer telephony interface."
::= { h3cVoiceCallHistoryObjects 2 }
h3cVoiceCallHistoryEntry OBJECT-TYPE
SYNTAX H3cVoiceCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a extended voice call history information."
INDEX { h3cCallHistoryIndex }
::= { h3cVoiceCallHistoryTable 1 }
H3cVoiceCallHistoryEntry ::= SEQUENCE {
h3cVoCallHistoryConnectionId H3cGUid,
h3cVoCallHistoryTxDuration Gauge32,
h3cVoCallHistoryVoiceTxDuration Gauge32,
h3cVoCallHistoryFaxTxDuration Gauge32,
h3cVoCallHistoryCoderType H3cCodecType,
h3cVoCallHistoryImgPageCount Gauge32
}
h3cVoCallHistoryConnectionId OBJECT-TYPE
SYNTAX H3cGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier of circuit switched network for
the gateway call."
::= { h3cVoiceCallHistoryEntry 1 }
h3cVoCallHistoryTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of transmit path open from this peer to the
voice gateway for the call. The units is milliseconds."
::= { h3cVoiceCallHistoryEntry 2 }
h3cVoCallHistoryVoiceTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice transmitted from this peer to voice
gateway for this call. The voice utilization rate can be
obtained by dividing this by h3cVoCallHistoryTxDuration object.
The units is milliseconds."
::= { h3cVoiceCallHistoryEntry 3 }
h3cVoCallHistoryFaxTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of fax transmitted from this peer to voice gateway
for this call. The fax utilization rate can be obtained by
dividing this by h3cVoCallHistoryTxDuration object. The units
is milliseconds."
::= { h3cVoiceCallHistoryEntry 4 }
h3cVoCallHistoryCoderType OBJECT-TYPE
SYNTAX H3cCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder type. It specifies the encode type to
the PSTN leg of a call."
::= { h3cVoiceCallHistoryEntry 5 }
h3cVoCallHistoryImgPageCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fax related image pages are received or
transmitted via the peer for the call. The units is page."
::= { h3cVoiceCallHistoryEntry 6 }
-- ===========================================================================
-- h3cVoiceVoIPCallHistoryTable
-- ===========================================================================
h3cVoiceVoIPCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cVoiceVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the VoIP extension to the call active table of
DIAL-CONTROL-MIB. It contains VoIP call leg information about
specific VoIP call destination."
::= { h3cVoiceCallHistoryObjects 3 }
h3cVoiceVoIPCallHistoryEntry OBJECT-TYPE
SYNTAX H3cVoiceVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a extended VoIP call history
information."
INDEX {h3cCallHistoryIndex }
::= { h3cVoiceVoIPCallHistoryTable 1 }
H3cVoiceVoIPCallHistoryEntry ::= SEQUENCE {
h3cVoVoIPCallHistoryConnectionId H3cGUid,
h3cVoVoIPCallHistoryRemSigIPType InetAddressType,
h3cVoVoIPCallHistoryRemSigIPAddr InetAddress,
h3cVoVoIPCallHistoryRemSigPort Integer32,
h3cVoVoIPCallHistoryRemMedIPType InetAddressType,
h3cVoVoIPCallHistoryRemMedIPAddr InetAddress,
h3cVoVoIPCallHistoryRemMedPort Integer32,
h3cVoVoIPCallHistorySessProtocol INTEGER,
h3cVoVoIPCallHistoryCoderType H3cCodecType
}
h3cVoVoIPCallHistoryConnectionId OBJECT-TYPE
SYNTAX H3cGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier of packet-switched network for the
gateway call."
::= { h3cVoiceVoIPCallHistoryEntry 1 }
h3cVoVoIPCallHistoryRemSigIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote system signalling IP address for the VoIP call."
::= { h3cVoiceVoIPCallHistoryEntry 2 }
h3cVoVoIPCallHistoryRemSigIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system signalling IP address for the VoIP call."
::= { h3cVoiceVoIPCallHistoryEntry 3 }
h3cVoVoIPCallHistoryRemSigPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener signalling port to which to
transmit voice packets."
::= { h3cVoiceVoIPCallHistoryEntry 4 }
h3cVoVoIPCallHistoryRemMedIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote system media IP address for the VoIP call."
::= { h3cVoiceVoIPCallHistoryEntry 5 }
h3cVoVoIPCallHistoryRemMedIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system media IP address for the VoIP call."
::= { h3cVoiceVoIPCallHistoryEntry 6 }
h3cVoVoIPCallHistoryRemMedPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener media port to which to transmit voice
packets."
::= { h3cVoiceVoIPCallHistoryEntry 7 }
h3cVoVoIPCallHistorySessProtocol OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
h323(2),
sip(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session protocol to be used for internet
call between local and remote router via IP backbone.
unknown The protocol is unknown.
h323 The protocol is H323.
sip The protocol is session initiation."
::= { h3cVoiceVoIPCallHistoryEntry 8 }
h3cVoVoIPCallHistoryCoderType OBJECT-TYPE
SYNTAX H3cCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder type. It specifies the encode type to the
VoIP leg of a call."
::= { h3cVoiceVoIPCallHistoryEntry 9 }
END