1510 lines
62 KiB
Plaintext
1510 lines
62 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (C) 2002 by HUAWEI 3Com TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description: power over ethernet extend mib
|
|
-- Reference: POWER-ETHERNET-MIB
|
|
-- Version: V1.5
|
|
-- History:
|
|
-- V1.0 2004-07-24 Created by Gaolong
|
|
-- V1.1 2004-09-08 Update file by Gaolong for some syntax errors.
|
|
-- V1.2 2004-11-19 Update file by liuhongxu for poe need.
|
|
-- add h3cMainPsePriorityMode¡¢h3cPsePowerMaxValue¡¢
|
|
-- h3cpsePDChangNotification adjust the objects' sequence of
|
|
-- h3cPsePortTable and h3cMainPseTable add the description
|
|
-- of MANDATORY-GROUPS in h3cPseCompliance.
|
|
-- V1.3 2004-12-16 Update file by liuhongxu for poe profile
|
|
-- add h3cPsePortProfile, h3cPseProfilesTable
|
|
-- change the name of h3cPseProfileIndex add
|
|
-- h3cPseProfileApplyNum. adjust the format of this mib.
|
|
-- V1.4 2005-03-29 Update file by Wangzhaoyan for poe pow need.
|
|
-- add h3cPOEPowerObjects, h3cPOEThresholdLimitObjs,
|
|
-- h3cPOESupModuleInfoObjs, h3cPOEDCOutStateObjects,
|
|
-- h3cPOEDCDCOutInfoObjects, h3cPOEACSwitchStateModuleObjs,
|
|
-- h3cPOEInCurStateObjects, h3cPOEAlarmStateObjects and the
|
|
-- sub-nodes. add 17 traps change the node name from
|
|
-- h3cpsePDChangNotification to h3cpsePDChangeNotification
|
|
-- change some detail as the suggestion from Wangyingxia and
|
|
-- Yangyang. adjust the format of this mib.
|
|
-- V1.5 2005-11-21 Update file by Liweizhen for controling the power-management
|
|
-- policy of PSE or PD. Add h3cPsePolicyMode, h3cPDPolicyMode,
|
|
-- h3cMainPsePowerPriority.
|
|
-- Delete some description of h3cPsePortProfileIndex node.
|
|
-- Change the description of h3cPseProfilePowerMode node.
|
|
-- Change SYNTAX OCTET STRING range for the following nodes:
|
|
-- h3cPOEPowerType, h3cPOESupervisionModuleName,
|
|
-- h3cPOESMFactorName, h3cPOEModuleHardVerInfo.
|
|
-- Adjust the format of this mib.
|
|
-- =================================================================
|
|
A3COM-HUAWEI-POWER-ETH-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
h3cCommon
|
|
FROM A3COM-HUAWEI-OID-MIB
|
|
pethPsePortGroupIndex, pethPsePortIndex,
|
|
pethMainPseGroupIndex, pethPsePortDetectionStatus
|
|
FROM POWER-ETHERNET-MIB
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
h3cPowerEthernetExt MODULE-IDENTITY
|
|
LAST-UPDATED "200407261023Z" -- July 26, 2004 at 10:23 GMT
|
|
|
|
ORGANIZATION
|
|
"Organization."
|
|
CONTACT-INFO
|
|
"Contact-info."
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { h3cCommon 14 }
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
h3cPsePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The indexing scheme is taken form that used by
|
|
the IETF Power MIB. The same indexing scheme is
|
|
used to give continuity in behaviour between
|
|
that standard and this extensions definitioin."
|
|
::= { h3cPowerEthernetExt 1 }
|
|
|
|
|
|
h3cPsePortEntry OBJECT-TYPE
|
|
SYNTAX H3cPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pethPsePortGroupIndex is imported from the IETF Power MIB
|
|
and uniquely identifies the group containing the port to which
|
|
power ethernet PSE is connected. Group means (box in the stack,
|
|
module in a rack).
|
|
|
|
The pethPsePortPowerIndex is imported from the IETF Power MIB
|
|
and uniquely identifies the power ethernet PSE port within group
|
|
pethPseGroupIndex to which the power Ethernet PSE entry is
|
|
connected. This value will match the local port number on a
|
|
switch."
|
|
INDEX { pethPsePortGroupIndex, pethPsePortIndex }
|
|
::= { h3cPsePortTable 1 }
|
|
|
|
|
|
H3cPsePortEntry ::=
|
|
SEQUENCE {
|
|
h3cPsePortFaultDescription
|
|
DisplayString,
|
|
h3cPsePortPeakPower
|
|
Integer32,
|
|
h3cPsePortAveragePower
|
|
Integer32,
|
|
h3cPsePortCurrentPower
|
|
Integer32,
|
|
h3cPsePortPowerLimit
|
|
Integer32,
|
|
h3cPsePortProfileIndex
|
|
Integer32
|
|
}
|
|
|
|
h3cPsePortFaultDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object supports the fault category of the IETF Power MIB [1]
|
|
pethPsePortDetectionStatus object. A textual description
|
|
containing more information about the nature of this fault is
|
|
provided by this object. Typically this will detail the precise
|
|
PoE hardware state which is causing the pethPsePortDetectionStatus
|
|
object to be in the 'fault' state.
|
|
It is a DisplayString of up to 255 characters."
|
|
::= { h3cPsePortEntry 2 }
|
|
|
|
|
|
h3cPsePortPeakPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the peak power which has been consumed by
|
|
the port. It is defined as the highest measured value of power
|
|
in milliWatts that has been consumed by the port. Its value
|
|
is only reset when link is lost, the port is PoE disabled or
|
|
when it is manually reset by the user asspecified below.
|
|
It is a read/write integer value with units of milliWatts.
|
|
Writing a value of zero to this object resets its value
|
|
to zero. Writing any other value to this object has no
|
|
effect on its value and an error is returned."
|
|
::= { h3cPsePortEntry 3 }
|
|
|
|
|
|
h3cPsePortAveragePower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the average power which has been consumed
|
|
by the port. This object is a read/write integer value with
|
|
units of milliWatts. Writing a value of zero to this object
|
|
resets its value to zero. Writing any other value to this
|
|
object has no effect on its value and an error is returned."
|
|
::= { h3cPsePortEntry 4 }
|
|
|
|
|
|
h3cPsePortCurrentPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the power currently being consumed by the port.
|
|
It is a read only integer value with units of milliWatts."
|
|
::= { h3cPsePortEntry 5 }
|
|
|
|
|
|
h3cPsePortPowerLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the power limit set for this port.
|
|
The PSE will not supply more than this level of power to the
|
|
specified port.
|
|
It is a read/write integer value with units of milliWatts."
|
|
::= { h3cPsePortEntry 6 }
|
|
|
|
h3cPsePortProfileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the power profile which is currently associated
|
|
with this port. This object references the corresponding
|
|
h3cPseProfileIndex object in the power profiles table. A
|
|
value of zero is a special case and indicates that no
|
|
power profile is currently associated with this port. When
|
|
h3cPseProfileIndex is set to an index of existent profile,
|
|
pethPsePortPowerPairs, pethPsePortPowerPriority,
|
|
pethPsePortAdminEnable and h3cPsePortPowerLimit will be
|
|
set to the same as corresponding value. PethPsePortPowerPairs,
|
|
pethPsePortPowerPriority and pethPsePortAdminEnable are objects
|
|
of rfc3621-Power-Ethernet.mib."
|
|
::= { h3cPsePortEntry 7 }
|
|
|
|
|
|
h3cMainPseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMainPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { h3cPowerEthernetExt 2 }
|
|
|
|
|
|
h3cMainPseEntry OBJECT-TYPE
|
|
SYNTAX H3cMainPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pethMainPseGroupIndex is imported from the IETF Power MIB
|
|
and uniquely identifies the group containing the port to which
|
|
power ethernet PSE is connected. Group means (box in the stack,
|
|
module in a rack) and the value 1 MUST be used for non-modular
|
|
devices."
|
|
INDEX { pethMainPseGroupIndex }
|
|
::= { h3cMainPseTable 1 }
|
|
|
|
|
|
H3cMainPseEntry ::=
|
|
SEQUENCE {
|
|
h3cMainGuaranteedPowerRemaining
|
|
Integer32,
|
|
h3cMainPsePeakPower
|
|
Integer32,
|
|
h3cMainPseAveragePower
|
|
Integer32,
|
|
h3cMainPsePowerLimit
|
|
Integer32,
|
|
h3cMainPsePriorityMode
|
|
INTEGER,
|
|
h3cMainPseLegacy
|
|
INTEGER,
|
|
h3cMainPsePowerPriority
|
|
INTEGER
|
|
}
|
|
|
|
h3cMainPsePowerLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the power limit set for the unit as a whole.
|
|
The PoE unit will already have a nominal power defined by the
|
|
IETF Power MIB [1] pethMainPsePower object. This OPTIONAL object
|
|
specifies a further limit to this nominal power value. This may
|
|
be useful to control the thermals of the unit, or for internal
|
|
testing purposes. One possible use for this object may be to lower
|
|
the power consumption of the unit if one or more of the internal
|
|
fans have broken. It is a read/write integer value with units of
|
|
Watts (note - Watts is chosen instead of milliWatts here since
|
|
the IETF Power MIB [1] measures unit based parameters, such as
|
|
the pethMainPsePower object, in units of Watts)."
|
|
::= { h3cMainPseEntry 1 }
|
|
|
|
|
|
h3cMainPseAveragePower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the average power which has been consumed
|
|
by the port. It is a read/write integer value with units of
|
|
Watts (note - Watts is chosen instead of milliWatts here since
|
|
the IETF Power MIB [1] measures unit based parameters, such as
|
|
the pethMainPsePower object, in units of Watts). Writing a value
|
|
of zero to this object resets its value to zero. Writing any
|
|
other value to this object has no effect on its value and an error
|
|
is returned."
|
|
::= { h3cMainPseEntry 2 }
|
|
|
|
|
|
h3cMainPsePeakPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the peak power which has been consumed for PoE.
|
|
It is defined as the highest measured value of power in milliWatts
|
|
that has been consumed at any one point in time by the sum of the PoE
|
|
ports. Its value is only reset when the unit is powered on or when
|
|
it is manually reset by the user as specifiedbelow. It is a read/write
|
|
integer value with units of Watts (note - Watts is chosen instead of
|
|
milliWatts here since the IETF Power MIB [1] measures unit based
|
|
parameters, such as the pethMainPsePower object, in units of Watts).
|
|
Writing a value of zero to this object resets its value to zero.
|
|
Writing any other value to this object has noeffect on its value
|
|
and an error is returned."
|
|
::= { h3cMainPseEntry 3 }
|
|
|
|
|
|
h3cMainGuaranteedPowerRemaining OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the amount of power remaining in the guaranteed
|
|
power pool. Each time a port is placed into guaranteed mode it
|
|
reserves a set amount of power out of the total guaranteed power
|
|
pool for the system. This intention of this object is to give the
|
|
client of this MIB (whether that be the CLI or the Web interface or
|
|
the end user) an indication of how many ports can still be placed
|
|
into guaranteed mode. It is a read only integer value with units of
|
|
Watts(note - Watts is chosen instead of milliWatts here since the
|
|
IETF Power MIB [1] measures unit based parameters,such as the
|
|
pethMainPsePower object, in units of Watts)."
|
|
::= { h3cMainPseEntry 4 }
|
|
|
|
|
|
h3cMainPsePriorityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disconnection(0),
|
|
non-disconnection(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes or controls the priority mode on slot which must be
|
|
enabled firstly. When a new board is inserted, and the power is
|
|
over-load, a value of disconnection(0) means that the power will
|
|
stop supply to the low priority slot ; A value of non-disconnection(1)
|
|
means that the slot still supply when a new board is inserted, and
|
|
the power is over-load too."
|
|
::= { h3cMainPseEntry 5 }
|
|
|
|
h3cMainPseLegacy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(0),
|
|
disable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes or controls the legacy mode on slot which must be enabled
|
|
firstly. Legacy mode: standard or nonstandard PD detection mode."
|
|
::= { h3cMainPseEntry 6 }
|
|
|
|
h3cMainPsePowerPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes or controls the priority of the PSE. The priority
|
|
will be used by the PSE policy to prevent from power overloading.
|
|
If the priority of PSE is set to critical, the PSE will turn into
|
|
guaranteed mode. The priority could be used by a control mechanism
|
|
that prevents power overloading by disconnecting PSEs with lower
|
|
power priority. PSEs that connect devices critical to the
|
|
application should be set to higher priority."
|
|
::= { h3cMainPseEntry 7 }
|
|
|
|
-- Power Profile PSE table
|
|
h3cPseProfilesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPseProfilesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects representing a set of power profiles.
|
|
Power profiles can be applied to PoE ports, which have the
|
|
effect of automatically setting the priority, power limit
|
|
and PoE enable MIB objects to the values specified in the
|
|
power profile."
|
|
::= { h3cPowerEthernetExt 7 }
|
|
|
|
h3cPseProfilesEntry OBJECT-TYPE
|
|
SYNTAX H3cPseProfilesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display and control the Main power of a PSE."
|
|
INDEX { h3cPseProfileIndex }
|
|
::= { h3cPseProfilesTable 1 }
|
|
|
|
H3cPseProfilesEntry ::= SEQUENCE {
|
|
h3cPseProfileIndex Integer32,
|
|
h3cPseProfileName DisplayString,
|
|
h3cPseProfilePowerMode INTEGER,
|
|
h3cPseProfilePowerLimit Integer32,
|
|
h3cPseProfilePriority INTEGER,
|
|
h3cPseProfilePairs INTEGER,
|
|
h3cPseProfileApplyNum Integer32,
|
|
h3cPseProfileRowStatus RowStatus
|
|
}
|
|
|
|
h3cPseProfileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the profile. This uniquely allow the profile to be
|
|
identified."
|
|
::= { h3cPseProfilesEntry 1 }
|
|
|
|
h3cPseProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Assigns the profile a name with which the settings
|
|
can be assiciated with. For example, 'NBX Phone'."
|
|
::= { h3cPseProfilesEntry 2 }
|
|
|
|
h3cPseProfilePowerMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
powerDisabled (1),
|
|
powerEnabled (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power mode associated with this power profile. There
|
|
are two possible power modes as follows: powerDisabled,
|
|
powerEnabled. When a power profile is applied to a PSE port,
|
|
this value dictates the settings of the ports pethPsePortPowerPriority
|
|
and pethPsePortAdminEnable objects."
|
|
::= { h3cPseProfilesEntry 3 }
|
|
|
|
h3cPseProfilePowerLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15400)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power limit to be applied to the ports h3cPsePortPowerLimit
|
|
object when the profile is applied to the PSE port. Expressed in
|
|
milliWatts."
|
|
::= { h3cPseProfilesEntry 4 }
|
|
|
|
h3cPseProfilePriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the priority of the port from the point of
|
|
view of a power management algorithm. The priority that is set
|
|
by this variable could be used by a control mechanism that
|
|
prevents over current situations by disconnecting first ports
|
|
with lower power priority. Ports that connect devices critical
|
|
to the operation of the network - like the E911 telephones
|
|
ports - should be set to higher priority."
|
|
::= { h3cPseProfilesEntry 5 }
|
|
|
|
h3cPseProfilePairs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
signal(1),
|
|
spare(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes or controls the pairs in use. If the value of
|
|
pethPsePortPowerPairsControl is true, this object is writable.
|
|
A value of signal(1) means that the signal pairs only are in use.
|
|
A value of spare(2) means that the spare pairs only are in use."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.4 aPSEPowerPairs"
|
|
::= { h3cPseProfilesEntry 6 }
|
|
|
|
h3cPseProfileApplyNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of this profile which has been applied.
|
|
If h3cPseProfileApplyNum is not zero, user can't
|
|
change the current line."
|
|
::= { h3cPseProfilesEntry 7 }
|
|
|
|
h3cPseProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this classifier.
|
|
If h3cPseProfileApplyNum is not zero, user can't
|
|
delete the current line."
|
|
::= { h3cPseProfilesEntry 8 }
|
|
|
|
h3cPseAutoDetectActive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSupported(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies whether the device auto-detection feature is
|
|
active. If this object is set to Active, and a known powered device
|
|
is detected, then the port will automatically switch to Auto-Guaranteed
|
|
mode. This is a stackwide object (ie. it is not referenced by
|
|
group index)."
|
|
::= { h3cPowerEthernetExt 3 }
|
|
|
|
h3cPsePowerMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the max poe power for lanswitch.
|
|
The value should between the power currently and the max power."
|
|
::= { h3cPowerEthernetExt 5 }
|
|
|
|
h3cPsePolicyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
priority(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PSE policy only applies to the situation that when a new
|
|
board (PSE) is inserted, and the power is overload.
|
|
A value of priority(2) means that the power will stop supplying
|
|
to the low priority PSE. About PSE priority, please refer to
|
|
h3cMainPsePowerPriority. A value of disabled(1) means that the
|
|
power will stop supplying to the new inserted PSE. The default
|
|
value of this object is disabled(1)."
|
|
::= { h3cPowerEthernetExt 9 }
|
|
|
|
h3cPDPolicyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
priority(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PD policy only applies to the situation that when a new
|
|
PD is inserted, and the power of PSE is overload.
|
|
A value of priority(2) means that the power will stop supplying
|
|
to the low priority port PD. About port priority, please refer
|
|
to pethPsePortPowerPriority. A value of disabled(1) means that
|
|
the slot stop supplying to the new inserted PD. The default
|
|
value of this object is disabled(1)."
|
|
::= { h3cPowerEthernetExt 10 }
|
|
|
|
h3cpseportNotification OBJECT IDENTIFIER ::= { h3cPowerEthernetExt 6 }
|
|
|
|
-- Notification Control Objects
|
|
|
|
h3cpsePDChangeNotification NOTIFICATION-TYPE
|
|
OBJECTS { pethPsePortDetectionStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates if PD has been inserted or pulled out."
|
|
::= { h3cpseportNotification 1 }
|
|
|
|
h3cPOEDisconnectNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleDisconnect }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module does not disconnect."
|
|
::= { h3cpseportNotification 2 }
|
|
|
|
h3cPOEInputErrorNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleInputError }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module input error."
|
|
::= { h3cpseportNotification 3 }
|
|
|
|
h3cPOEOutputErrorNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleOutputError }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module output error."
|
|
::= { h3cpseportNotification 4 }
|
|
|
|
h3cPOEOverVoltageNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleOverVoltage }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module overruns the
|
|
voltage limit."
|
|
::= { h3cpseportNotification 5 }
|
|
|
|
h3cPOEOverTempNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleOverTemp }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module overruns the
|
|
temperature limit."
|
|
::= { h3cpseportNotification 6 }
|
|
|
|
h3cPOEFanErrorNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleFanError }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module fan error."
|
|
::= { h3cpseportNotification 7 }
|
|
|
|
h3cPOEModuleShutdownNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleShutdown }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module is closed."
|
|
::= { h3cpseportNotification 8 }
|
|
|
|
h3cPOECurRestrictedNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEAlarmModuleInfoIndex, h3cPOEModuleCurRestricted }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the POE power module current is restricted."
|
|
::= { h3cpseportNotification 9 }
|
|
|
|
h3cPOEACSwitchNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEACSwitchStateIndex, h3cPOEACSwitchState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input switch alarm of this POE power."
|
|
::= { h3cpseportNotification 10 }
|
|
|
|
h3cPOEACInCurANotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEInCurAState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input current A alarm state of
|
|
this POE power."
|
|
::= { h3cpseportNotification 11 }
|
|
|
|
h3cPOEACInCurBNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEInCurBState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input current B alarm state of
|
|
this POE power."
|
|
::= { h3cpseportNotification 12 }
|
|
|
|
h3cPOEACInCurCNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEInCurCState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input current C alarm state of
|
|
this POE power."
|
|
::= { h3cpseportNotification 13 }
|
|
|
|
h3cPOEACSwitchVolABNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOESwitchStateVolExIndex, h3cPOESwitchStateInVolAB}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input voltage AB alarm state of
|
|
this POE power."
|
|
::= { h3cpseportNotification 14 }
|
|
|
|
h3cPOEACSwitchVolBCNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOESwitchStateVolExIndex, h3cPOESwitchStateInVolBC}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input voltage BC alarm state of
|
|
this POE power."
|
|
::= { h3cpseportNotification 15 }
|
|
|
|
h3cPOEACSwitchVolCANotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOESwitchStateVolExIndex, h3cPOESwitchStateInVolCA }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the AC input voltage CA alarm state of
|
|
this POE power."
|
|
::= { h3cpseportNotification 16 }
|
|
|
|
h3cPOEDCOutVolNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cPOEDCOutStateIndex, h3cPOEDCOutDCVolAlarm }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the DC output alarm of this POE power."
|
|
::= { h3cpseportNotification 17 }
|
|
|
|
h3cPOEShutdownNotification NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates the whole POE power has been shutdown."
|
|
::= { h3cpseportNotification 18 }
|
|
h3cPseComformance OBJECT IDENTIFIER ::= { h3cPowerEthernetExt 4 }
|
|
|
|
h3cPseCompliances OBJECT IDENTIFIER ::= { h3cPseComformance 1 }
|
|
|
|
h3cPseCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { h3cPsePortGroup,
|
|
h3cMainPseGroup,
|
|
h3cPseScalarGroup,
|
|
h3cPsePDNotificationGroup
|
|
}
|
|
GROUP h3cPseProfilesGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for executing POE commands as a batch."
|
|
::= { h3cPseCompliances 1 }
|
|
|
|
h3cPseGroup OBJECT IDENTIFIER ::= { h3cPseComformance 2 }
|
|
|
|
h3cPsePortGroup OBJECT-GROUP
|
|
OBJECTS { h3cPsePortProfileIndex, h3cPsePortPowerLimit, h3cPsePortCurrentPower,
|
|
h3cPsePortAveragePower, h3cPsePortPeakPower, h3cPsePortFaultDescription,
|
|
h3cMainPsePriorityMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects should be supported at the same time."
|
|
::= { h3cPseGroup 1 }
|
|
|
|
h3cMainPseGroup OBJECT-GROUP
|
|
OBJECTS { h3cMainPsePowerLimit, h3cMainPseAveragePower, h3cMainPsePeakPower,
|
|
h3cMainGuaranteedPowerRemaining }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects should be supported at the same time."
|
|
::= { h3cPseGroup 2 }
|
|
|
|
h3cPseScalarGroup OBJECT-GROUP
|
|
OBJECTS { h3cPseAutoDetectActive, h3cPsePowerMaxValue, h3cPsePolicyMode ,
|
|
h3cPDPolicyMode }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of scalar objects supported."
|
|
::= { h3cPseGroup 3 }
|
|
|
|
h3cPsePDNotificationGroup OBJECT-GROUP
|
|
OBJECTS { h3cpsePDChangeNotification }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PD Change Notification."
|
|
::= { h3cPseGroup 4 }
|
|
|
|
h3cPseProfilesGroup OBJECT-GROUP
|
|
OBJECTS { h3cPseProfileName, h3cPseProfilePowerMode,
|
|
h3cPseProfilePowerLimit, h3cPseProfilePriority,
|
|
h3cPseProfilePairs, h3cPseProfileApplyNum, h3cPseProfileRowStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects should be supported at the same time."
|
|
::= { h3cPseGroup 5 }
|
|
|
|
h3cPOEPowerThresholdLimitGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEThresholdACMimimum, h3cPOEThresholdACMaximum,
|
|
h3cPOEThresholdDCMinimum, h3cPOEThresholdDCMaximum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power threshold limits group."
|
|
::= { h3cPseGroup 6 }
|
|
|
|
h3cPOEPowerSupInfoGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEPowerType, h3cPOEPowerModuleNum, h3cPOESupervisionModuleName,
|
|
h3cPOESMMajorVersion, h3cPOESMMinorVersion, h3cPOESMFactorName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic Power information group."
|
|
::= { h3cPseGroup 7 }
|
|
|
|
h3cPOEPowerDCOutStateGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEDCOutStateModuleNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DC out power state group."
|
|
::= { h3cPseGroup 8 }
|
|
|
|
h3cPOEPowerDCOutInfoGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEDCOutCurNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power AC input switch information group"
|
|
::= { h3cPseGroup 9 }
|
|
|
|
h3cPOEPowerACSwitchStateModuleGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEACSwitchStateModuleNum}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PD Change Notification."
|
|
::= { h3cPseGroup 10 }
|
|
|
|
h3cPOEPowerInCurStateGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEInCurStateModuleNum, h3cPOEInCurAState, h3cPOEInCurBState,
|
|
h3cPOEInCurCState}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PD Change Notification."
|
|
::= { h3cPseGroup 11 }
|
|
|
|
h3cPOEPowerAlarmStateGroup OBJECT-GROUP
|
|
OBJECTS { h3cPOEAlarmStateModuleNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PD Change Notification."
|
|
::= { h3cPseGroup 12 }
|
|
|
|
ACAlarmState ::= INTEGER {
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)
|
|
}
|
|
|
|
DCAlarmState ::= INTEGER {
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
fuseBroken (4),
|
|
switchOff (5),
|
|
otherError (6)
|
|
}
|
|
|
|
SwitchState ::= INTEGER {
|
|
on (1),
|
|
off (2),
|
|
highVoltInput (3),
|
|
lowVoltInput (4)
|
|
}
|
|
|
|
ModuleAlarmState ::= INTEGER {
|
|
normal (1),
|
|
alarm (2)
|
|
}
|
|
|
|
h3cPOEPowerObjects OBJECT IDENTIFIER ::= { h3cPowerEthernetExt 8 }
|
|
|
|
h3cPOEThresholdLimitObjs OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 1 }
|
|
|
|
h3cPOEThresholdACMimimum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Input threshold AC minimum.
|
|
It is a read-write node.
|
|
The value of this node is 'OCTET STRING',
|
|
it is used to describe a float value.
|
|
So this string should fit the following rule:
|
|
1. This string should be terminated by '\0';
|
|
2. Every characters should be number or radix point;
|
|
3. The radix point should occur only once, and it should not
|
|
be the first or the last character of the string.
|
|
The value of this node should be smaller than 264.0V and larger than 90.0V.
|
|
And it should be smaller than the h3cPOEThresholdACMaximum."
|
|
::= { h3cPOEThresholdLimitObjs 1 }
|
|
|
|
h3cPOEThresholdACMaximum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Input threshold AC maximum.
|
|
It is a read-write node.
|
|
The value of this node is 'OCTET STRING',
|
|
it is used to describe a float value.
|
|
So this string should fit the following rule:
|
|
1. This string should be terminated by '\0';
|
|
2. Every characters should be number or radix point;
|
|
3. The radix point should occur only once, and it should not
|
|
be the first or the last character of the string.
|
|
It should be smaller than 264.0V and larger than 90.0V.
|
|
And it should be larger than the h3cPOEThresholdACMinimum."
|
|
::= { h3cPOEThresholdLimitObjs 2 }
|
|
|
|
h3cPOEThresholdDCMinimum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Input threshold DC minimum.
|
|
It is a read-write node.
|
|
The value of this node is 'OCTET STRING',
|
|
it is used to describe a float value.
|
|
So this string should fit the following rule:
|
|
1. This string should be terminated by '\0';
|
|
2. Every characters should be number or radix point;
|
|
3. The radix point should occur only once, and it should not
|
|
be the first or the last character of the string.
|
|
It should be smaller than 47.0V and larger than 45.0V."
|
|
::= { h3cPOEThresholdLimitObjs 3 }
|
|
|
|
h3cPOEThresholdDCMaximum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Input threshold DC maximum.
|
|
It is a read-write node.
|
|
The value of this node is 'OCTET STRING',
|
|
it is used to describe a float value.
|
|
So this string should fit the following rule:
|
|
1. This string should be terminated by '\0';
|
|
2. Every characters should be number or radix point;
|
|
3. The radix point should occur only once, and it should not
|
|
be the first or the last character of the string.
|
|
It should be smaller than 57.0V and larger than 55.0V."
|
|
::= { h3cPOEThresholdLimitObjs 4 }
|
|
|
|
h3cPOESupModuleInfoObjs OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 2 }
|
|
|
|
h3cPOEPowerType OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the power."
|
|
::= { h3cPOESupModuleInfoObjs 1 }
|
|
|
|
h3cPOEPowerModuleNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the power modules."
|
|
::= { h3cPOESupModuleInfoObjs 2 }
|
|
|
|
h3cPOESupervisionModuleName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the Supervision Module name on this POE power."
|
|
::= { h3cPOESupModuleInfoObjs 3 }
|
|
|
|
h3cPOESMMajorVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the high byte of the monitor module version."
|
|
::= { h3cPOESupModuleInfoObjs 4 }
|
|
|
|
h3cPOESMMinorVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the low byte of the monitor module version."
|
|
::= { h3cPOESupModuleInfoObjs 5 }
|
|
|
|
h3cPOESMFactorName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the name of the manufactor."
|
|
::= { h3cPOESupModuleInfoObjs 6 }
|
|
|
|
h3cPOEModuleInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPOEModuleInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of the module information on this POE power."
|
|
::= { h3cPOESupModuleInfoObjs 7 }
|
|
|
|
h3cPOEModuleInfoEntry OBJECT-TYPE
|
|
SYNTAX H3cPOEModuleInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the module information on this POE power."
|
|
INDEX { h3cPOEModuleIndex }
|
|
::= { h3cPOEModuleInfoTable 1 }
|
|
|
|
H3cPOEModuleInfoEntry ::=
|
|
SEQUENCE {
|
|
h3cPOEModuleIndex
|
|
Integer32,
|
|
h3cPOEModuleID
|
|
Integer32,
|
|
h3cPOEModuleInfoPower
|
|
Integer32,
|
|
h3cPOEModuleHardVerInfo
|
|
OCTET STRING
|
|
}
|
|
|
|
h3cPOEModuleIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the current module on this POE power.
|
|
It is also the index of h3cPOEModuleInfoTable.
|
|
The range of this node is from 1 to h3cPOEPowerModuleNum."
|
|
::= { h3cPOEModuleInfoEntry 1 }
|
|
|
|
h3cPOEModuleID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the current module on this POE power."
|
|
::= { h3cPOEModuleInfoEntry 2 }
|
|
|
|
h3cPOEModuleInfoPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power of the current module on this POE power."
|
|
::= { h3cPOEModuleInfoEntry 3 }
|
|
|
|
h3cPOEModuleHardVerInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hardware version information of the current module on this POE power."
|
|
::= { h3cPOEModuleInfoEntry 4 }
|
|
|
|
h3cPOEDCOutStateObjects OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 3 }
|
|
|
|
h3cPOEDCOutStateModuleNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The module number on this POE power.
|
|
It is the maximum of the h3cPOEDCOutStateIndex."
|
|
::= { h3cPOEDCOutStateObjects 1 }
|
|
|
|
h3cPOEDCOutStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPOEDCOutStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of DC output power state on this POE power."
|
|
::= { h3cPOEDCOutStateObjects 2 }
|
|
|
|
h3cPOEDCOutStateEntry OBJECT-TYPE
|
|
SYNTAX H3cPOEDCOutStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the DC output power state on this POE power."
|
|
INDEX { h3cPOEDCOutStateIndex }
|
|
::= { h3cPOEDCOutStateTable 1 }
|
|
|
|
H3cPOEDCOutStateEntry ::=
|
|
SEQUENCE {
|
|
h3cPOEDCOutStateIndex
|
|
Integer32,
|
|
h3cPOEDCOutDCVolAlarm
|
|
DCAlarmState
|
|
}
|
|
|
|
h3cPOEDCOutStateIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the DC output power state on this POE power.
|
|
The range of this node is from 1 to h3cPOEDCOutStateModuleNum."
|
|
::= { h3cPOEDCOutStateEntry 1 }
|
|
|
|
h3cPOEDCOutDCVolAlarm OBJECT-TYPE
|
|
SYNTAX DCAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DC output alarm of the DC output power state on this POE power.
|
|
The value of this node will be the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
fuseBroken (4),
|
|
switchOff (5),
|
|
otherError (6)."
|
|
::= { h3cPOEDCOutStateEntry 2 }
|
|
|
|
h3cPOEDCOutInfoObjects OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 4 }
|
|
|
|
h3cPOEDCOutCurNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DC output current on this POE power.
|
|
It is the maximum of h3cPOEDCOutInfoIndex."
|
|
::= { h3cPOEDCOutInfoObjects 1 }
|
|
|
|
h3cPOEDCOutInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPOEDCOutInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of the DC output information on this POE power."
|
|
::= { h3cPOEDCOutInfoObjects 2 }
|
|
|
|
h3cPOEDCOutInfoEntry OBJECT-TYPE
|
|
SYNTAX H3cPOEDCOutInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the DC output information on this POE power."
|
|
INDEX { h3cPOEDCOutInfoIndex }
|
|
::= { h3cPOEDCOutInfoTable 1 }
|
|
|
|
H3cPOEDCOutInfoEntry ::=
|
|
SEQUENCE {
|
|
h3cPOEDCOutInfoIndex
|
|
Integer32,
|
|
h3cPOEDCOutVol
|
|
OCTET STRING,
|
|
h3cPOEDCOutInfoLoadCur
|
|
OCTET STRING
|
|
}
|
|
|
|
h3cPOEDCOutInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the DC output information on this POE POWER.
|
|
The range of this node is from 1 to h3cPOEDCOutCurNum."
|
|
::= { h3cPOEDCOutInfoEntry 1 }
|
|
|
|
h3cPOEDCOutVol OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DC output voltage of the current DC output on this POE power."
|
|
::= { h3cPOEDCOutInfoEntry 2 }
|
|
|
|
h3cPOEDCOutInfoLoadCur OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total load current of the current DC output on this POE power."
|
|
::= { h3cPOEDCOutInfoEntry 3 }
|
|
|
|
h3cPOEACSwitchStateModuleObjs OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 5 }
|
|
|
|
h3cPOEACSwitchStateModuleNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the AC swtich state module on this POE power.
|
|
It is the maximum of h3cPOEACSwitchStateIndex."
|
|
::= { h3cPOEACSwitchStateModuleObjs 1 }
|
|
|
|
h3cPOEACSwitchStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPOEACSwitchStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of the AC switch state on this POE power."
|
|
::= { h3cPOEACSwitchStateModuleObjs 2 }
|
|
|
|
h3cPOEACSwitchStateEntry OBJECT-TYPE
|
|
SYNTAX H3cPOEACSwitchStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the AC switch state on this POE power."
|
|
INDEX { h3cPOEACSwitchStateIndex }
|
|
::= { h3cPOEACSwitchStateTable 1 }
|
|
|
|
H3cPOEACSwitchStateEntry ::=
|
|
SEQUENCE {
|
|
h3cPOEACSwitchStateIndex
|
|
Integer32,
|
|
h3cPOEACSwitchState
|
|
SwitchState
|
|
}
|
|
|
|
h3cPOEACSwitchStateIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the AC switch state on this POE power.
|
|
The range of this node is from 1 to h3cPOEACSwitchStateModuleNum."
|
|
::= { h3cPOEACSwitchStateEntry 1 }
|
|
|
|
h3cPOEACSwitchState OBJECT-TYPE
|
|
SYNTAX SwitchState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AC switch state on this POE power.
|
|
The value of this node will be one of the following values:
|
|
on (1),
|
|
off (2),
|
|
highVoltInput (3),
|
|
lowVoltInput (4)"
|
|
::= { h3cPOEACSwitchStateEntry 2 }
|
|
|
|
h3cPOEInCurStateObjects OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 6 }
|
|
|
|
h3cPOEInCurStateModuleNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DC input current state of the module on this POE power.
|
|
It is the maximum of the h3cPOESwitchStateVolExIndex."
|
|
::= { h3cPOEInCurStateObjects 1 }
|
|
|
|
h3cPOEInCurAState OBJECT-TYPE
|
|
SYNTAX ACAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current A state in the DC input on this POE power.
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOEInCurStateObjects 2 }
|
|
|
|
h3cPOEInCurBState OBJECT-TYPE
|
|
SYNTAX ACAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current B state in the DC input on this POE power.
|
|
The value of this node will be one of the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOEInCurStateObjects 3 }
|
|
|
|
h3cPOEInCurCState OBJECT-TYPE
|
|
SYNTAX ACAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current C state in the DC input on this POE power.
|
|
The value of this node will be one of the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOEInCurStateObjects 4 }
|
|
|
|
h3cPOESwitchStateVolExTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPOESwitchStateVolExEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All alarm status of the VOL status.
|
|
The value of this node will be one of the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOEInCurStateObjects 5 }
|
|
|
|
h3cPOESwitchStateVolExEntry OBJECT-TYPE
|
|
SYNTAX H3cPOESwitchStateVolExEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The h3cPOESwitchStateVolExIndex will match the number of the VOL status."
|
|
INDEX { h3cPOESwitchStateVolExIndex }
|
|
::= { h3cPOESwitchStateVolExTable 1 }
|
|
|
|
H3cPOESwitchStateVolExEntry ::=
|
|
SEQUENCE {
|
|
h3cPOESwitchStateVolExIndex
|
|
Integer32,
|
|
h3cPOESwitchStateInVolAB
|
|
ACAlarmState,
|
|
h3cPOESwitchStateInVolBC
|
|
ACAlarmState,
|
|
h3cPOESwitchStateInVolCA
|
|
ACAlarmState
|
|
}
|
|
|
|
h3cPOESwitchStateVolExIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object species the index of the VOL status.
|
|
The range of this node is from 1 to h3cPOEInCurStateModuleNum."
|
|
::= { h3cPOESwitchStateVolExEntry 1 }
|
|
|
|
h3cPOESwitchStateInVolAB OBJECT-TYPE
|
|
SYNTAX ACAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the VOL AB alarm in each VOL status.
|
|
The value of this node will be one of the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOESwitchStateVolExEntry 2 }
|
|
|
|
h3cPOESwitchStateInVolBC OBJECT-TYPE
|
|
SYNTAX ACAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the VOL BC alarm in each VOL status.
|
|
The value of this node will be one of the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOESwitchStateVolExEntry 3 }
|
|
|
|
h3cPOESwitchStateInVolCA OBJECT-TYPE
|
|
SYNTAX ACAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the VOL CA alarm in each VOL status.
|
|
The value of this node will be one of the following values:
|
|
normal (1),
|
|
underLimit (2),
|
|
aboveLimit (3),
|
|
lackPhrase (4),
|
|
fuseBroken (5),
|
|
switchOff (6),
|
|
otherError (7)."
|
|
::= { h3cPOESwitchStateVolExEntry 4 }
|
|
|
|
h3cPOEAlarmStateObjects OBJECT IDENTIFIER ::= { h3cPOEPowerObjects 7 }
|
|
|
|
h3cPOEAlarmStateModuleNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the number of the power modules in alarm state."
|
|
::= { h3cPOEAlarmStateObjects 1 }
|
|
|
|
h3cPOEAlarmStateInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cPOEAlarmStateInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All alarm states in the POE power modules."
|
|
::= { h3cPOEAlarmStateObjects 2 }
|
|
|
|
h3cPOEAlarmStateInfoEntry OBJECT-TYPE
|
|
SYNTAX H3cPOEAlarmStateInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The h3cPOEAlarmModuleInfoIndex will match the number
|
|
of the power module."
|
|
INDEX { h3cPOEAlarmModuleInfoIndex }
|
|
::= { h3cPOEAlarmStateInfoTable 1 }
|
|
|
|
H3cPOEAlarmStateInfoEntry ::=
|
|
SEQUENCE {
|
|
h3cPOEAlarmModuleInfoIndex
|
|
Integer32,
|
|
h3cPOEModuleDisconnect
|
|
ModuleAlarmState,
|
|
h3cPOEModuleInputError
|
|
ModuleAlarmState,
|
|
h3cPOEModuleOutputError
|
|
ModuleAlarmState,
|
|
h3cPOEModuleOverVoltage
|
|
ModuleAlarmState,
|
|
h3cPOEModuleOverTemp
|
|
ModuleAlarmState,
|
|
h3cPOEModuleFanError
|
|
ModuleAlarmState,
|
|
h3cPOEModuleShutdown
|
|
ModuleAlarmState,
|
|
h3cPOEModuleCurRestricted
|
|
ModuleAlarmState
|
|
}
|
|
|
|
h3cPOEAlarmModuleInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index specifies the index of the H3cPOEAlarmStateInfoEntry table.
|
|
The range of this node is from 1 to h3cPOEAlarmStateModuleNum."
|
|
::= { h3cPOEAlarmStateInfoEntry 1 }
|
|
|
|
h3cPOEModuleDisconnect OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
The module does not link.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 2 }
|
|
|
|
h3cPOEModuleInputError OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
Input error.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 3 }
|
|
|
|
h3cPOEModuleOutputError OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
Output error.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 4 }
|
|
|
|
h3cPOEModuleOverVoltage OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
The voltage is too high.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 5 }
|
|
|
|
h3cPOEModuleOverTemp OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
The temperature is too high.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 6 }
|
|
|
|
h3cPOEModuleFanError OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
The fan error.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 7 }
|
|
|
|
h3cPOEModuleShutdown OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
The module is shutdown.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 8 }
|
|
|
|
h3cPOEModuleCurRestricted OBJECT-TYPE
|
|
SYNTAX ModuleAlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node specifies the alarm state:
|
|
The module limit the current.
|
|
The value of this node is one of the following values:
|
|
normal (1),
|
|
alarm (2)."
|
|
::= { h3cPOEAlarmStateInfoEntry 9 }
|
|
END
|