857 lines
35 KiB
Plaintext
857 lines
35 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
|
|
--
|
|
-- Description: Network Time Protocol (NTP) Version 3, is used to synchronize
|
|
-- timekeeping among a set of distributed time servers and clients.
|
|
-- Reference:
|
|
-- Version: V1.5
|
|
-- History:
|
|
-- V1.0 <sunhaipeng>,<2003-03-19>,<initial>
|
|
-- V1.1 jinyi,2004-12-02,
|
|
-- Fix syntax bugs and adjust format of the whole file.
|
|
-- V1.2 sunkai,2006-03-23
|
|
-- Modified SYNTAX of hwNTPPeerKeyId.
|
|
-- V1.3 2010-03-05
|
|
-- Added hwNTPServerIP.
|
|
-- V1.4 2011-01-27
|
|
-- Added hwNTPSysPollSec, hwNTPSysClockSec. Modified hwNTPServerIP.
|
|
-- V1.5 2012-04-13 by huangshengliang
|
|
-- change seconds to milliseconds.
|
|
-- =================================================================
|
|
A3COM-HUAWEI-NTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress,Integer32,MODULE-IDENTITY,OBJECT-TYPE,Counter32,Unsigned32
|
|
FROM SNMPv2-SMI
|
|
RowStatus,TruthValue
|
|
FROM SNMPv2-TC
|
|
huaweiDatacomm
|
|
FROM A3COM-HUAWEI-OID-MIB;
|
|
|
|
hwNTP MODULE-IDENTITY
|
|
LAST-UPDATED "200303150000Z"
|
|
ORGANIZATION
|
|
"Hangzhou H3C Tech. Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team Hangzhou H3C Tech. Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip:100085"
|
|
DESCRIPTION
|
|
"This MIB provides mechanisms to monitor a NTP server."
|
|
REVISION "200303150000Z"
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { huaweiDatacomm 22 }
|
|
|
|
hwNTPSystemMIB OBJECT IDENTIFIER ::= { hwNTP 1 }
|
|
|
|
hwNTPSystemMIBObjects OBJECT IDENTIFIER ::= { hwNTPSystemMIB 1 }
|
|
|
|
hwNTPSysLeap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noWarning(0),
|
|
addSecond(1),
|
|
subtractSecond(2),
|
|
alarm(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Leap Indicator (LI): This is a two-bit code warning of an impending
|
|
leap second to be inserted/deleted in the last minute of the current
|
|
day, with bit 0 and bit 1, respectively, coded as follows:
|
|
00, no warning
|
|
01, last minute has 61 seconds
|
|
10, last minute has 59 seconds)
|
|
11, alarm condition (clock not synchronized)."
|
|
::= { hwNTPSystemMIBObjects 1 }
|
|
|
|
hwNTPSysStratum OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an eight-bit integer indicating the stratum level
|
|
of the local clock, with values defined as follows:
|
|
0, unspecified
|
|
1, primary reference (e.g.,, radio clock)
|
|
2-255, secondary reference (via NTP)"
|
|
::= { hwNTPSystemMIBObjects 2 }
|
|
|
|
hwNTPSysPrecision OBJECT-TYPE
|
|
SYNTAX Integer32(-20..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precision : This is a signed integer indicating the
|
|
precision of the various clocks, in seconds to the nearest
|
|
power of two. The value must be rounded to the next larger
|
|
power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67ms)
|
|
power-frequency clock would be assigned the value -5 (31.25 ms),
|
|
while a 1000-Hz (1 ms) crystal-controlled clock would be assigned
|
|
the value -9 (1.95 ms)."
|
|
::= { hwNTPSystemMIBObjects 3 }
|
|
|
|
hwNTPSysRootdelay OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Root Delay : This is a signed fixed-point number indicating
|
|
the total roundtrip delay to the primary reference source
|
|
at the root of the synchronization subnet, in milliseconds. Note
|
|
that this variable can take on both positive and negative
|
|
values, depending on clock precision and skew."
|
|
::= { hwNTPSystemMIBObjects 4 }
|
|
|
|
hwNTPSysRootdispersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Root Dispersion : This is a signed fixed-point number
|
|
indicating the maximum error relative to the primary
|
|
reference source at the root of the synchronization
|
|
subnet, in milliseconds. Only positive values greater than
|
|
zero are possible."
|
|
::= { hwNTPSystemMIBObjects 5 }
|
|
|
|
hwNTPSysRefid OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference Clock Identifier : This is a 32-bit code
|
|
identifying the particular reference clock. In the
|
|
case of stratum 0 (unspecified) or stratum 1 (primary
|
|
reference source), this is a four-octet, left-justified,
|
|
zero-padded ASCII string.
|
|
Stratum, Code, Meaning
|
|
0, DCN, DCN routing protocol
|
|
0, TSP, TSP time protocol
|
|
1, ATOM, Atomic clock (calibrated)
|
|
1, WWVB, WWVB LF (band 5) radio
|
|
1, GOES, GOES UHF (band 9) satellite
|
|
1, WWV, WWV HF (band 7) radio"
|
|
::= { hwNTPSystemMIBObjects 6 }
|
|
|
|
hwNTPSysReftime OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference Timestamp : This is the local time, in
|
|
timestamp format, when the local clock was last
|
|
updated. If the local clock has never been synchronized,
|
|
the value is zero."
|
|
::= { hwNTPSystemMIBObjects 7 }
|
|
|
|
hwNTPSysPoll OBJECT-TYPE
|
|
SYNTAX Integer32(-20..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Poll Interval : This is a signed integer indicating
|
|
the minimum interval between transmitted messages,
|
|
in seconds as a power of two. For instance, a value
|
|
of six indicates a minimum interval of 64 seconds."
|
|
::= { hwNTPSystemMIBObjects 8 }
|
|
|
|
hwNTPSysPeer OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a selector identifying the current synchronization
|
|
source. Usually this will be a pointer to a structure
|
|
containing the peer variables. The special value NULL indicates
|
|
There is no currently valid synchronization source."
|
|
::= { hwNTPSystemMIBObjects 9 }
|
|
|
|
hwNTPSysState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noUpdateClock(0),
|
|
getfreqInfo(1),
|
|
clockBySet(2),
|
|
clockBySetAndNoFreq(3),
|
|
clockBySyns(4),
|
|
findError(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a integer indicating the state of local clock."
|
|
::= { hwNTPSystemMIBObjects 10 }
|
|
|
|
hwNTPSysOffset OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The offset of two clocks is the time difference between them, in milliseconds."
|
|
::= { hwNTPSystemMIBObjects 11 }
|
|
|
|
hwNTPSysDrift OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Real clocks exhibit some variation in skew (second derivative of
|
|
offset with time), which is called drift."
|
|
::= { hwNTPSystemMIBObjects 12 }
|
|
|
|
hwNTPSysCompliance OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string indicating the system error."
|
|
::= { hwNTPSystemMIBObjects 13 }
|
|
|
|
hwNTPSysClock OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the current local time, in timestamp
|
|
format. Local time is derived from the hardware clock of the particular
|
|
machine and increments at intervals depending on the design used."
|
|
::= { hwNTPSystemMIBObjects 14 }
|
|
|
|
hwNTPSysStabil OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a indicating that stability of a clock is how well
|
|
it can maintain a constant frequency."
|
|
::= { hwNTPSystemMIBObjects 15 }
|
|
|
|
hwNTPSysAuthenticate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAuthenticate(0),
|
|
authenticate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a integer indicating that system support authentication."
|
|
::= { hwNTPSystemMIBObjects 16 }
|
|
|
|
hwNTPSysPollSec OBJECT-TYPE
|
|
SYNTAX Integer32 (2..1048576)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PollSec Interval : This is a integer indicating the minimum
|
|
interval between transmitted messages. For instance, a value of
|
|
six indicates a minimum interval of 6 seconds."
|
|
::= { hwNTPSystemMIBObjects 17 }
|
|
|
|
hwNTPSysClockSec OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the current local time, in integer format.
|
|
Local time is derived from the hardware clock of the particular
|
|
machine and increments at intervals depending on the design used."
|
|
::= { hwNTPSystemMIBObjects 18 }
|
|
|
|
hwNTPServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NTP server ip address. It must be a unicast address,
|
|
rather than a broadcast address, a multicast address or
|
|
the IP address of the local clock. To delete a configured
|
|
NTP server ip address, please set hwNTPServerIP to 0."
|
|
::= { hwNTPSystemMIBObjects 19 }
|
|
|
|
hwNTPPeerMIB OBJECT IDENTIFIER ::= { hwNTP 2 }
|
|
|
|
hwNTPPeerMIBObjects OBJECT IDENTIFIER ::= { hwNTPPeerMIB 1 }
|
|
|
|
hwNTPPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NTPPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides information on the peers with
|
|
which the local NTP server has associations. The peers
|
|
are also NTP servers but running on different hosts."
|
|
::= { hwNTPPeerMIBObjects 1 }
|
|
|
|
hwNTPPeerEntry OBJECT-TYPE
|
|
SYNTAX NTPPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each peers' entry provides NTP information retrieved
|
|
from a particular peer NTP server. Each peer is
|
|
identified by a unique association identifier.
|
|
Entries are automatically created when the user
|
|
configures the NTP server to be associated with remote
|
|
peers. Similarly entries are deleted when the user
|
|
removes the peer association from the NTP server.
|
|
Entries can also be created by the management station
|
|
by setting values for the following objects:
|
|
hwNTPPeerRemAdr and making the hwNTPPeerRowStatus as
|
|
'active'. At the least, the management station has
|
|
to set a value for hwNTPPeerRemAdr to make the
|
|
row active."
|
|
INDEX { hwNTPPeerRemAdr,hwNTPPeerHMode }
|
|
::= { hwNTPPeerTable 1 }
|
|
|
|
NTPPeerEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwNTPPeerConfig TruthValue,
|
|
hwNTPPeerAuthenable TruthValue,
|
|
hwNTPPeerAuthentic TruthValue,
|
|
hwNTPPeerRemAdr IpAddress,
|
|
hwNTPPeerRemPort Integer32,
|
|
hwNTPPeerLocAdr IpAddress,
|
|
hwNTPPeerLocPort Integer32,
|
|
hwNTPPeerLeap INTEGER,
|
|
hwNTPPeerHMode INTEGER,
|
|
hwNTPPeerStratum Integer32,
|
|
hwNTPPeerPPoll Integer32,
|
|
hwNTPPeerHPoll Integer32,
|
|
hwNTPPeerPrecision Integer32,
|
|
hwNTPPeerRootDelay OCTET STRING,
|
|
hwNTPPeerRootDispersion OCTET STRING,
|
|
hwNTPPeerRefId OCTET STRING,
|
|
hwNTPPeerRefTime OCTET STRING,
|
|
hwNTPPeerOrg OCTET STRING,
|
|
hwNTPPeerRec OCTET STRING,
|
|
hwNTPPeerXmt OCTET STRING,
|
|
hwNTPPeerReach Integer32,
|
|
hwNTPPeerValid Integer32,
|
|
hwNTPPeerTimer Integer32,
|
|
hwNTPPeerDelay OCTET STRING,
|
|
hwNTPPeerOffset OCTET STRING,
|
|
hwNTPPeerJitter OCTET STRING,
|
|
hwNTPPeerDispersion OCTET STRING,
|
|
hwNTPPeerKeyId Unsigned32,
|
|
hwNTPPeerFiltDelay OCTET STRING,
|
|
hwNTPPeerFiltOffset OCTET STRING,
|
|
hwNTPPeerFiltError OCTET STRING,
|
|
hwNTPPeerPMode INTEGER,
|
|
hwNTPPeerReceived Counter32,
|
|
hwNTPPeerSent Counter32,
|
|
hwNTPPeerFlash BITS,
|
|
hwNTPPeerRowStatus RowStatus
|
|
}
|
|
|
|
hwNTPPeerConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit indicating that the association was created
|
|
from configuration information and should not be demobilized
|
|
if the peer becomes unreachable."
|
|
::= { hwNTPPeerEntry 1 }
|
|
|
|
hwNTPPeerAuthenable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit indicating that system support authentication."
|
|
::= { hwNTPPeerEntry 2 }
|
|
|
|
hwNTPPeerAuthentic OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit indicating that massage pass authentication which is authentic."
|
|
::= { hwNTPPeerEntry 3 }
|
|
|
|
hwNTPPeerRemAdr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the peer. When creating a new
|
|
association, a value for this object should be set
|
|
before the row is made active."
|
|
::= { hwNTPPeerEntry 4 }
|
|
|
|
hwNTPPeerRemPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port number on which the peer receives NTP messages."
|
|
::= { hwNTPPeerEntry 5 }
|
|
|
|
hwNTPPeerLocAdr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the local host. Multi-homing can
|
|
be supported using this object."
|
|
::= { hwNTPPeerEntry 6 }
|
|
|
|
hwNTPPeerLocPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port number on which the local host receives NTP messages."
|
|
::= { hwNTPPeerEntry 7 }
|
|
|
|
hwNTPPeerLeap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noWarning(0),
|
|
addSecond(1),
|
|
subtractSecond(2),
|
|
alarm(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a two-bit code warning of an impending leap
|
|
second to be inserted in the NTP timescale. The bits
|
|
are set before 23:59 on the day of insertion and reset
|
|
after 00:00 on the following day. This causes the
|
|
number of seconds (rollover interval) in the day of
|
|
insertion to be increased or decreased by one. The two
|
|
bits are coded as below,
|
|
00, no warning
|
|
01, last minute has 61 seconds
|
|
10, last minute has 59 seconds
|
|
11, alarm condition (clock not synchronized)"
|
|
::= { hwNTPPeerEntry 8 }
|
|
|
|
hwNTPPeerHMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unspecified (0),
|
|
symmetricActive (1),
|
|
symmetricPassive (2),
|
|
client (3),
|
|
server(4),
|
|
broadcast (5),
|
|
reservedControl (6),
|
|
reservedPrivate (7),
|
|
broadcastclient (8),
|
|
multicastclient (9)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an integer indicating the association mode,
|
|
with values coded as follows,
|
|
0, unspecified
|
|
1, symmetric active - A host operating in this mode
|
|
sends periodic messages regardless of the
|
|
reach ability state or stratum of its peer. By
|
|
operating in this mode the host announces its
|
|
willingness to synchronize and be synchronized
|
|
by the peer
|
|
2, symmetric passive - This type of association is
|
|
ordinarily created upon arrival of a message
|
|
from a peer operating in the symmetric active
|
|
mode and persists only as long as the peer is
|
|
reachable and operating at a stratum level
|
|
less than or equal to the host; otherwise, the
|
|
association is dissolved. However, the
|
|
association will always persist until at least
|
|
one message has been sent in reply. By
|
|
operating in this mode the host announces its
|
|
willingness to synchronize and be synchronized
|
|
by the peer
|
|
3, client - A host operating in this mode sends
|
|
periodic messages regardless of the
|
|
reach ability state or stratum of its peer. By
|
|
operating in this mode the host, usually a LAN
|
|
workstation, announces its willingness to be
|
|
synchronized by, but not to synchronize the peer
|
|
4, server - This type of association is ordinarily
|
|
created upon arrival of a client request message
|
|
and exists only in order to reply to that
|
|
request, after which the association is
|
|
dissolved. By operating in this mode the host,
|
|
usually a LAN time server, announces its
|
|
willingness to synchronize, but not to be
|
|
synchronized by the peer
|
|
5, broadcast - A host operating in this mode sends
|
|
periodic messages regardless of the
|
|
reach ability state or stratum of the peers.
|
|
By operating in this mode the host, usually a
|
|
LAN time server operating on a high-speed
|
|
broadcast medium, announces its willingness to
|
|
synchronize all of the peers, but not to be
|
|
synchronized by any of them
|
|
6, reserved for NTP control messages
|
|
7, reserved for private use
|
|
8, broadcastclient
|
|
9, multicastclient"
|
|
::= { hwNTPPeerEntry 9 }
|
|
|
|
hwNTPPeerStratum OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a integer indicating the stratum level
|
|
of the local clock, with values defined as follows:
|
|
0, unspecified
|
|
1, primary reference (e.g.,, radio clock)
|
|
2-255, secondary reference (via NTP)"
|
|
::= { hwNTPPeerEntry 10 }
|
|
|
|
hwNTPPeerPPoll OBJECT-TYPE
|
|
SYNTAX Integer32(-20..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which the peer polls the local host."
|
|
::= { hwNTPPeerEntry 11 }
|
|
|
|
hwNTPPeerHPoll OBJECT-TYPE
|
|
SYNTAX Integer32(-20..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which the local host polls the peer."
|
|
::= { hwNTPPeerEntry 12 }
|
|
|
|
hwNTPPeerPrecision OBJECT-TYPE
|
|
SYNTAX Integer32(-20..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a signed integer indicating the precision of
|
|
the peer clock, in seconds to the nearest power of two.
|
|
The value must be rounded to the next larger power of
|
|
two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms)
|
|
power-frequency clock would be assigned the value -5 (31.25 ms),
|
|
while a 1000-Hz (1 ms) crystal-controlled clock would be assigned
|
|
the value -9 (1.95 ms)."
|
|
::= { hwNTPPeerEntry 13 }
|
|
|
|
hwNTPPeerRootDelay OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a signed fixed-point number indicating
|
|
the total roundtrip delay to the primary reference source
|
|
at the root of the synchronization subnet, in milliseconds.
|
|
Note that this variable can take on both positive and negative
|
|
values, depending on clock precision and skew."
|
|
::= { hwNTPPeerEntry 14 }
|
|
|
|
hwNTPPeerRootDispersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a signed fixed-point number indicating
|
|
the maximum error of the peer clock relative to
|
|
the primary reference source at the root of the
|
|
synchronization subnet, in milliseconds. Only
|
|
positive values greater than zero are possible."
|
|
::= { hwNTPPeerEntry 15 }
|
|
|
|
hwNTPPeerRefId OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reference identifier of the peer.
|
|
This is a 32-bit code identifying the particular reference clock.
|
|
In the case of stratum 0 (unspecified) or stratum 1 (primary
|
|
reference source), this is a four-octet, left-justified,
|
|
zero-padded ASCII string.
|
|
Stratum, Code, Meaning
|
|
0, DCN, DCN routing protocol
|
|
0, TSP, TSP time protocol
|
|
1, ATOM, Atomic clock (calibrated)
|
|
1, WWVB, WWVB LF (band 5) radio
|
|
1, GOES, GOES UHF (band 9) satellite
|
|
1, WWV, WWV HF (band 7) radio"
|
|
::= { hwNTPPeerEntry 16 }
|
|
|
|
hwNTPPeerRefTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the local time at the peer, in timestamp format,
|
|
when the local clock was last updated. If the local clock has
|
|
never been synchronized, the value is zero."
|
|
::= { hwNTPPeerEntry 17 }
|
|
|
|
hwNTPPeerOrg OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the local time, in timestamp format,
|
|
at the peer when it's latest NTP message was sent.
|
|
If the peer becomes unreachable the value is set to zero"
|
|
::= { hwNTPPeerEntry 18 }
|
|
|
|
hwNTPPeerRec OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the local time, in timestamp format,
|
|
when the latest NTP message from the peer arrived.
|
|
If the peer becomes unreachable the value is set to zero."
|
|
::= { hwNTPPeerEntry 19 }
|
|
|
|
hwNTPPeerXmt OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the local time, in timestamp format,
|
|
at which the NTP message departed the sender."
|
|
::= { hwNTPPeerEntry 20 }
|
|
|
|
hwNTPPeerReach OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a shift register of NTP.WINDOW bits used to
|
|
determine the reach ability status of the peer,
|
|
with bits entering from the least significant (rightmost) end.
|
|
A peer is considered reachable if at least
|
|
one bit in this register is set to one"
|
|
::= { hwNTPPeerEntry 21 }
|
|
|
|
hwNTPPeerValid OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an integer counter indicating the valid samples
|
|
remaining in the filter register. It is used to
|
|
determine the reach ability state and when the
|
|
poll interval should be increased or decreased."
|
|
::= { hwNTPPeerEntry 22 }
|
|
|
|
hwNTPPeerTimer OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an integer counter used to control the
|
|
interval of transmitted NTP messages from the local host to the peer."
|
|
::= { hwNTPPeerEntry 23 }
|
|
|
|
hwNTPPeerDelay OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a signed fixed-point number indicating
|
|
the roundtrip delay of the peer clock relative to
|
|
the local clock over the network path between them,
|
|
in milliseconds. Note that this variable can take on
|
|
both positive and negative values, depending on
|
|
clock precision and skew-error accumulation."
|
|
::= { hwNTPPeerEntry 24 }
|
|
|
|
hwNTPPeerOffset OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a signed, fixed-point number indicating the offset
|
|
of the peer clock relative to the local clock, in milliseconds."
|
|
::= { hwNTPPeerEntry 25 }
|
|
|
|
hwNTPPeerJitter OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an indicating that peer of sample Variance"
|
|
::= { hwNTPPeerEntry 26 }
|
|
|
|
hwNTPPeerDispersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a signed fixed-point number indicating the
|
|
maximum error of the peer clock relative to the local
|
|
clock over the network path between them, in milliseconds.
|
|
Only positive values greater than zero are possible."
|
|
::= { hwNTPPeerEntry 27 }
|
|
|
|
hwNTPPeerKeyId OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an unsigned integer identifying the cryptographic
|
|
key used to generate the message-authentication code."
|
|
::= { hwNTPPeerEntry 28 }
|
|
|
|
hwNTPPeerFiltDelay OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Round-trip delay of the peer clock relative to the
|
|
local clock over the network path between them, in
|
|
milliseconds. This variable can take on both positive
|
|
and negative values, depending on clock precision
|
|
and skew-error accumulation."
|
|
::= { hwNTPPeerEntry 29 }
|
|
|
|
hwNTPPeerFiltOffset OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The offset of the peer clock relative to the local clock in milliseconds."
|
|
::= { hwNTPPeerEntry 30 }
|
|
|
|
hwNTPPeerFiltError OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum error of the peer clock relative to the
|
|
local clock over the network path between them, in
|
|
milliseconds. Only positive values greater than zero
|
|
are possible."
|
|
::= { hwNTPPeerEntry 31 }
|
|
|
|
hwNTPPeerPMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unspecified (0),
|
|
symmetricActive (1),
|
|
symmetricPassive (2),
|
|
client (3),
|
|
server(4),
|
|
broadcast (5),
|
|
reservedControl (6),
|
|
reservedPrivate (7),
|
|
broadcastclient (8),
|
|
multicastclient (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an integer indicating the association mode,
|
|
with values coded as follows,
|
|
0, unspecified
|
|
1, symmetric active - A host operating in this mode
|
|
sends periodic messages regardless of the
|
|
reach ability state or stratum of its peer. By
|
|
operating in this mode the host announces its
|
|
willingness to synchronize and be synchronized
|
|
by the peer
|
|
2, symmetric passive - This type of association is
|
|
ordinarily created upon arrival of a message
|
|
from a peer operating in the symmetric active
|
|
mode and persists only as long as the peer is
|
|
reachable and operating at a stratum level
|
|
less than or equal to the host; otherwise, the
|
|
association is dissolved. However, the
|
|
association will always persist until at least
|
|
one message has been sent in reply. By
|
|
operating in this mode the host announces its
|
|
willingness to synchronize and be synchronized
|
|
by the peer
|
|
3, client - A host operating in this mode sends
|
|
periodic messages regardless of the
|
|
reach ability state or stratum of its peer. By
|
|
operating in this mode the host, usually a LAN
|
|
workstation, announces its willingness to be
|
|
synchronized by, but not to synchronize the peer
|
|
4, server - This type of association is ordinarily
|
|
created upon arrival of a client request message
|
|
and exists only in order to reply to that
|
|
request, after which the association is
|
|
dissolved. By operating in this mode the host,
|
|
usually a LAN time server, announces its
|
|
willingness to synchronize, but not to be
|
|
synchronized by the peer
|
|
5, broadcast - A host operating in this mode sends
|
|
periodic messages regardless of the
|
|
reach ability state or stratum of the peers.
|
|
By operating in this mode the host, usually a
|
|
LAN time server operating on a high-speed
|
|
broadcast medium, announces its willingness to
|
|
synchronize all of the peers, but not to be
|
|
synchronized by any of them
|
|
6, reserved for NTP control messages
|
|
7, reserved for private use
|
|
8, broadcastclient
|
|
9, multicastclient
|
|
When creating a new peer association, if no value
|
|
is specified for this object, it defaults to
|
|
'symmetricActive'."
|
|
::= { hwNTPPeerEntry 32 }
|
|
|
|
hwNTPPeerReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received massages."
|
|
::= { hwNTPPeerEntry 33 }
|
|
|
|
hwNTPPeerSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of send massages."
|
|
::= { hwNTPPeerEntry 34 }
|
|
|
|
hwNTPPeerFlash OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
recvRepeatMsg(0), -- received repeated massage
|
|
recvremanMsg(1), -- received remanufactured massage
|
|
unSynMsg(2), -- unsynchronized massage
|
|
dispBeyond(3), -- the peer dispersion beyond the mark
|
|
unauthenticate(4), -- the peer unauthenticate
|
|
unSynClock(5), -- the peer clock is unsynchronized
|
|
straBeyond(6), -- the peer stratum beyond the mark
|
|
rootDispBeyond(7), -- the peer rootdispersion beyond the mark
|
|
noAuthen(8), -- the peer no authentication
|
|
refuOperate(9) -- refuse operate
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information about the massage. "
|
|
::= { hwNTPPeerEntry 35 }
|
|
|
|
|
|
hwNTPPeerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status object for this row. When a management
|
|
station is creating a new row, it should set the
|
|
value for cntpPeersPeerAddress at least, before the
|
|
row can be made 'active'."
|
|
::= { hwNTPPeerEntry 36 }
|
|
END
|