714 lines
24 KiB
Plaintext
714 lines
24 KiB
Plaintext
-- =============================================================================
|
|
-- Copyright (C) 2002-2003 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description:MPLS-BGP-VPN-MIB
|
|
-- Reference:This mib was extracted from draft-ietf-mpls-arch-06.txt
|
|
-- Version: V1.11
|
|
-- History:
|
|
-- V1.1 Add copyright information
|
|
-- V1.11 Update description of the MODULE
|
|
-- =============================================================================
|
|
A3COM-HUAWEI-MPLS-BGP-VPN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
experimental, Integer32, Counter32, Unsigned32,
|
|
TimeTicks
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
|
|
TimeStamp, DisplayString
|
|
FROM SNMPv2-TC
|
|
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
|
|
huaweiMgmt, hwMpls
|
|
FROM A3COM-HUAWEI-OID-MIB;
|
|
|
|
hwMplsVpn MODULE-IDENTITY
|
|
LAST-UPDATED "200107201200Z" -- 20 July 2001 12:00:00 GMT
|
|
ORGANIZATION "IETF Layer-3 Virtual Private
|
|
Networks Working Group."
|
|
CONTACT-INFO
|
|
" Thomas D. Nadeau
|
|
tnadeau@cisco.com
|
|
|
|
Luyuan Fang
|
|
luyuanfang@att.com
|
|
|
|
Stephen Brannon
|
|
|
|
Fabio M. Chiussi
|
|
fabio@bell-labs.com
|
|
|
|
Joseph Dube
|
|
jdube@avici.com
|
|
|
|
Martin Tatham
|
|
martin.tatham@bt.com
|
|
|
|
Harmen Van Der Linde
|
|
hvdl@att.com
|
|
|
|
Comments and discussion to ppvpn@ietf.org"
|
|
|
|
DESCRIPTION
|
|
"This MIB contains managed object definitions for the
|
|
Multiprotocol Label Switching (MPLS)/Border Gateway
|
|
Protocol (BGP) Virtual Private Networks (VPNs) as
|
|
defined in : Rosen, E., Viswanathan, A., and R.
|
|
Callon, Multiprotocol Label Switching Architecture,
|
|
Internet Draft <draft-ietf-mpls-arch-06.txt>,
|
|
August 1999."
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"200107201200Z" -- 20 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Re-published as PPVPN working group draft. No changes
|
|
between this version and last; just name change."
|
|
REVISION
|
|
"200107171200Z" -- 17 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Removed mplsVpnVrfRouteTargetImport/Export from route target
|
|
table, and modified indexing to better reflect N <> R
|
|
distribution policy. Also added new object called
|
|
mplsVpnVrfRouteTargetType which denotes import/export
|
|
policy for the specified route target.
|
|
|
|
Added mplsVpnInterfaceConfRowStatus which allows for
|
|
an interface to be associated with a VPN through SNMP
|
|
configuration.
|
|
|
|
Added VrfName to index of VrfInterfaceConfEntry which allows
|
|
interfaces to be associated with the appropriate VRF.
|
|
|
|
Modified description of mplsVpnVrfConfMaxPossibleRoutes and
|
|
mplsVpnVrfConfMaxRoutes to allow for undetermined value.
|
|
|
|
Removed 'both' enumerated value in mplsVpnVrfBgpNbrRole.
|
|
|
|
Updated example to reflect these changes."
|
|
REVISION
|
|
"200107101200Z" -- 10 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Renamed mplsNumVrfSecViolationThreshExceeded to
|
|
mplsNumVrfSecIllegalLabelThreshExceeded, and removed
|
|
mplsVpnInterfaceConfIndex from varbind.
|
|
|
|
Changed MplsVpnId TC from SnmpAdminString to OCTET STRING.
|
|
|
|
Added mplsVpnVrfSecIllegalLabelRcvThresh to
|
|
mplsVpnVrfSecEntry.
|
|
|
|
Changed duplicate mplsVpnVrfRouteTargetImport in
|
|
mplsVpnVrfRouteTargetEntry INDEX to
|
|
mplsVpnVrfRouteTargetExport."
|
|
REVISION
|
|
"200106191200Z" -- 19 June 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Fixed several compile errors."
|
|
REVISION
|
|
"200105301200Z" -- 30 May 2001 12:00:00 EST
|
|
DESCRIPTION
|
|
"Updated most of document and MIB to reflect comments from WG."
|
|
REVISION
|
|
"200009301200Z" -- 30 September 2000 12:00:00 EST
|
|
DESCRIPTION
|
|
"Initial draft version."
|
|
::= { hwMpls 3 } -- To be assigned
|
|
|
|
-- Textual Conventions.
|
|
|
|
MplsVpnId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identifier that is assigned to each MPLS/BGP VPN and
|
|
is used to uniquely identify it. This is assigned by the
|
|
system operator or NMS and SHOULD be unique throughout
|
|
the MPLS domain. If this is the case, then this identifier
|
|
can then be used at any LSR within a specific MPLS domain
|
|
to identify this MPLS/BGP VPN. It may also be possible to
|
|
preserve the uniqueness of this identifier across MPLS
|
|
domain boundaries, in which case this identifier can then
|
|
be used to uniquely identify MPLS/BGP VPNs on a more global
|
|
basis."
|
|
REFERENCE
|
|
"RFC 2685 [VPN-RFC2685] Fox B., et al, 'Virtual Private
|
|
Networks Identifier', September 1999."
|
|
SYNTAX OCTET STRING(SIZE (0..31))
|
|
|
|
MplsVpnRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route distinguisher and route target."
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
|
|
-- Top level components of this MIB.
|
|
mplsVpnObjects OBJECT IDENTIFIER ::= { hwMplsVpn 1 }
|
|
mplsVpnScalars OBJECT IDENTIFIER ::= { mplsVpnObjects 1 }
|
|
mplsVpnConf OBJECT IDENTIFIER ::= { mplsVpnObjects 2 }
|
|
mplsVpnRoute OBJECT IDENTIFIER ::= { mplsVpnObjects 3 }
|
|
|
|
|
|
-- Scalar Objects
|
|
mplsVpnConfiguredVrfs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs which are configured on this node."
|
|
::= { mplsVpnScalars 1 }
|
|
|
|
mplsVpnActiveVrfs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs which are active on this node.
|
|
That is, those whose operStatus = Up (1)."
|
|
::= { mplsVpnScalars 2 }
|
|
|
|
-- VPN Interface Configuration Table
|
|
|
|
mplsVpnInterfaceConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnInterfaceConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS capability
|
|
and associated information."
|
|
::= { mplsVpnConf 1 }
|
|
|
|
mplsVpnInterfaceConfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnInterfaceConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every interface capable of supporting MPLS/BGP VPN.
|
|
Each entry in this table is meant to correspond to
|
|
an entry in the Interfaces Table."
|
|
INDEX { mplsVpnVrfName, mplsVpnInterfaceConfIndex }
|
|
::= { mplsVpnInterfaceConfTable 1 }
|
|
|
|
MplsVpnInterfaceConfEntry ::= SEQUENCE {
|
|
mplsVpnInterfaceConfIndex InterfaceIndex,
|
|
mplsVpnInterfaceLabelEdgeType INTEGER,
|
|
mplsVpnInterfaceVpnClassification INTEGER,
|
|
mplsVpnInterfaceIpAddress InetAddress,
|
|
mplsVpnInterfaceIpAddressMask InetAddress,
|
|
mplsVpnInterfaceConfRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnInterfaceConfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an entry in the
|
|
MplsVPNInterfaceConfTable."
|
|
REFERENCE
|
|
"RFC 2233 - The Interfaces Group MIB using SMIv2,
|
|
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
|
|
::= { mplsVpnInterfaceConfEntry 1 }
|
|
|
|
mplsVpnInterfaceLabelEdgeType OBJECT-TYPE
|
|
SYNTAX INTEGER { providerEdge (1),
|
|
customerEdge (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the providerEdge(1) (PE) or customerEdge(2)
|
|
(CE) bit MUST be set."
|
|
DEFVAL { providerEdge }
|
|
::= { mplsVpnInterfaceConfEntry 2 }
|
|
|
|
mplsVpnInterfaceVpnClassification OBJECT-TYPE
|
|
SYNTAX INTEGER { carrierOfCarrier (1),
|
|
enterprise (2),
|
|
interProvider (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether this link participates in a
|
|
carrier-of-carrier's, enterprise, or inter-provider
|
|
scenario."
|
|
::= { mplsVpnInterfaceConfEntry 3 }
|
|
|
|
mplsVpnInterfaceIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this interface."
|
|
::= { mplsVpnInterfaceConfEntry 4 }
|
|
|
|
mplsVpnInterfaceIpAddressMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address mask of this interface."
|
|
::= { mplsVpnInterfaceConfEntry 5 }
|
|
|
|
mplsVpnInterfaceConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status for this entry. This value is
|
|
used to create a row in this table, signifying
|
|
that the specified interface is to be associated
|
|
with the specified interface. If this operation
|
|
suceeds, the interface will have been associated,
|
|
otherwise the agent would not allow the association.
|
|
If the agent only allows read-only operations on
|
|
this table, it will create entries in this table
|
|
as they are created."
|
|
::= { mplsVpnInterfaceConfEntry 6 }
|
|
|
|
-- VRF Configuration Table
|
|
|
|
mplsVpnVrfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP VPN
|
|
VRF Table capability and associated information.
|
|
Entries in this table define VRF routing instances
|
|
associated with MPLS/VPN interfaces. Note that
|
|
multiple interfaces can belong to the same VRF
|
|
instance. The collection of all VRF instances
|
|
comprises an actual VPN."
|
|
::= { mplsVpnConf 2 }
|
|
|
|
mplsVpnVrfConfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. The
|
|
indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName }
|
|
::= { mplsVpnVrfConfTable 1 }
|
|
|
|
MplsVpnVrfConfEntry ::= SEQUENCE {
|
|
mplsVpnVrfName MplsVpnId,
|
|
mplsVpnVrfRouteDistinguisher MplsVpnRouteDistinguisher,
|
|
mplsVpnVrfNetPrefixType INTEGER,
|
|
mplsVpnVrfNetPrefix InetAddress,
|
|
mplsVpnVrfIpRouteRedistributeConn TruthValue,
|
|
mplsVpnVrfIpRouteRedistributeStatic TruthValue,
|
|
mplsVpnVrfIpRouteRedistributeRip TruthValue,
|
|
mplsVpnVrfConfHighRouteThreshold Unsigned32,
|
|
mplsVpnVrfConfIsWarnOnly TruthValue,
|
|
mplsVpnVrfConfMaxRoutes Unsigned32,
|
|
mplsVpnVrfConfRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnVrfName OBJECT-TYPE
|
|
SYNTAX MplsVpnId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of this VPN. This MAY
|
|
be equivalent to the RFC2685 VPN-ID."
|
|
REFERENCE
|
|
"RFC 2685 [VPN-RFC2685] Fox B., et al, `Virtual
|
|
Private Networks Identifier`, September 1999."
|
|
::= { mplsVpnVrfConfEntry 1 }
|
|
|
|
mplsVpnVrfRouteDistinguisher OBJECT-TYPE
|
|
SYNTAX MplsVpnRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route distinguisher for this VRF."
|
|
::= { mplsVpnVrfConfEntry 2 }
|
|
|
|
mplsVpnVrfNetPrefixType OBJECT-TYPE
|
|
SYNTAX INTEGER { other(1),
|
|
rip(2),
|
|
ospf(3),
|
|
isis(4),
|
|
bgp(5),
|
|
static(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the type network prefix in use for the
|
|
PE-CE connections. "
|
|
::= { mplsVpnVrfConfEntry 3 }
|
|
|
|
mplsVpnVrfNetPrefix OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the network prefix for the
|
|
PE-CE connections."
|
|
::= { mplsVpnVrfConfEntry 4 }
|
|
|
|
mplsVpnVrfIpRouteRedistributeConn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the redistribution of directly connected
|
|
networks into the VRF BGP table."
|
|
::= { mplsVpnVrfConfEntry 5 }
|
|
|
|
mplsVpnVrfIpRouteRedistributeStatic OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the redistribution of static routes
|
|
into the VRF BGP table."
|
|
::= { mplsVpnVrfConfEntry 6 }
|
|
|
|
mplsVpnVrfIpRouteRedistributeRip OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the redistribution of rip routes
|
|
into the VRF BGP table."
|
|
::= { mplsVpnVrfConfEntry 7 }
|
|
|
|
mplsVpnVrfConfHighRouteThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes high-level water marker for the number of
|
|
routes which this VRF may hold."
|
|
::= { mplsVpnVrfConfEntry 8 }
|
|
|
|
mplsVpnVrfConfIsWarnOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the action when the amount of VPN's routes
|
|
exceed the mplsVpnVrfConfHighRouteThreshold."
|
|
::= { mplsVpnVrfConfEntry 9 }
|
|
|
|
mplsVpnVrfConfMaxRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes maximum number of routes which this VRF is
|
|
configured to hold. This value MUST be less than or
|
|
equal to mplsVrfMaxPossibleRoutes unless it is set
|
|
to 0."
|
|
::= { mplsVpnVrfConfEntry 10 }
|
|
|
|
mplsVpnVrfConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { mplsVpnVrfConfEntry 11 }
|
|
|
|
-- MplsVpnRouteTargetTable
|
|
|
|
mplsVpnVrfRouteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-VRF route target association.
|
|
Each entry identifies a connectivity policy supported
|
|
as part of a VPN."
|
|
::= { mplsVpnConf 3 }
|
|
|
|
mplsVpnVrfRouteTargetEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in this table is created by an LSR for
|
|
each route target configured for a VRF supporting
|
|
a MPLS/BGP VPN instance. The indexing provides an
|
|
ordering per-VRF instance."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfRouteTarget,
|
|
mplsVpnVrfRouteTargetType }
|
|
::= { mplsVpnVrfRouteTargetTable 1 }
|
|
|
|
MplsVpnVrfRouteTargetEntry ::= SEQUENCE {
|
|
mplsVpnVrfRouteTarget MplsVpnRouteDistinguisher,
|
|
mplsVpnVrfRouteTargetType INTEGER,
|
|
mplsVpnVrfRouteTargetRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnVrfRouteTarget OBJECT-TYPE
|
|
SYNTAX MplsVpnRouteDistinguisher
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target distribution policy."
|
|
::= { mplsVpnVrfRouteTargetEntry 1 }
|
|
|
|
mplsVpnVrfRouteTargetType OBJECT-TYPE
|
|
SYNTAX INTEGER { import(1), export(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target export distribution type."
|
|
::= { mplsVpnVrfRouteTargetEntry 2 }
|
|
|
|
mplsVpnVrfRouteTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for this entry."
|
|
::= { mplsVpnVrfRouteTargetEntry 3 }
|
|
|
|
-- MplsVpnVrfBgpNbrAddrTable
|
|
-- Ed Note: how does this table relate to the BGP peering table;
|
|
-- this is only EBGP; what about IBGP info?
|
|
-- route/tag distributions
|
|
|
|
mplsVpnVrfBgpNbrAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP neighbor
|
|
addresses for both PEs and CEs."
|
|
::= { mplsVpnConf 4 }
|
|
|
|
mplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfBgpNbrAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. The
|
|
indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfBgpNbrAddr }
|
|
|
|
::= { mplsVpnVrfBgpNbrAddrTable 1 }
|
|
|
|
MplsVpnVrfBgpNbrAddrEntry ::= SEQUENCE {
|
|
mplsVpnVrfBgpNbrAddr InetAddress,
|
|
mplsVpnVrfBgpNbrRole INTEGER,
|
|
mplsVpnVrfBgpNbrType InetAddressType,
|
|
mplsVpnVrfBgpNbrAsNumber Unsigned32,
|
|
mplsVpnVrfBgpNbrAdminStatus INTEGER,
|
|
mplsVpnVrfBgpNbrRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnVrfBgpNbrAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the BGP neighbor address."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 1 }
|
|
|
|
mplsVpnVrfBgpNbrRole OBJECT-TYPE
|
|
SYNTAX INTEGER { ce(1), pe(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the role played by this BGP neighbor
|
|
with respect to this VRF."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 2 }
|
|
|
|
mplsVpnVrfBgpNbrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the address family of the PE address."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 3 }
|
|
|
|
mplsVpnVrfBgpNbrAsNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Automonous System that the BGP's neighbour in."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 4 }
|
|
|
|
mplsVpnVrfBgpNbrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { mplsVpnVrfBgpNbrSetUp (1),
|
|
mplsVpnVrfBgpNbrSetDown (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The action set by SNMP client."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 5 }
|
|
|
|
mplsVpnVrfBgpNbrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 6 }
|
|
|
|
|
|
-- VRF Routing Table
|
|
|
|
mplsVpnVrfRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP VPN VRF Table
|
|
routing information. Entries in this table define VRF routing
|
|
entries associated with the specified MPLS/VPN interfaces. Note
|
|
that this table contains both BGP and IGP routes, as both may
|
|
appear in the same VRF."
|
|
REFERENCE
|
|
"1. RFC 1213 Section 6.6, The IP Group.
|
|
2. RFC 2096 "
|
|
::= { mplsVpnRoute 1 }
|
|
|
|
mplsVpnVrfRouteEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every route
|
|
present configured (either dynamically or statically) within
|
|
the context of a specific VRF capable of supporting MPLS/BGP
|
|
VPN. The indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfRouteDest,
|
|
mplsVpnVrfRouteMask, mplsVpnVrfRouteNextHop }
|
|
|
|
::= { mplsVpnVrfRouteTable 1 }
|
|
|
|
MplsVpnVrfRouteEntry ::= SEQUENCE {
|
|
mplsVpnVrfRouteDest InetAddress,
|
|
mplsVpnVrfRouteMask InetAddress,
|
|
mplsVpnVrfRouteNextHop InetAddress,
|
|
mplsVpnVrfRouteIfIndex InterfaceIndex,
|
|
mplsVpnVrfRouteProto INTEGER,
|
|
mplsVpnVrfRouteRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnVrfRouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route.
|
|
This object may not take a Multicast (Class D)
|
|
address value."
|
|
::= { mplsVpnVrfRouteEntry 1 }
|
|
|
|
mplsVpnVrfRouteMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to
|
|
the value in the mplsVpnVrfRouteDest field.
|
|
For those systems that do not support
|
|
arbitrary subnet masks, an agent constructs the
|
|
value of the mplsVpnVrfRouteMask by reference
|
|
to the IP Address Class.
|
|
|
|
Any assignment (implicit or otherwise) of an
|
|
instance of this object to a value x must be
|
|
rejected if the bit-wise logical-AND of x with
|
|
the value of the corresponding instance of the
|
|
mplsVpnVrfRouteDest object is not equal to
|
|
mplsVpnVrfRouteDest."
|
|
::= { mplsVpnVrfRouteEntry 2 }
|
|
|
|
mplsVpnVrfRouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On remote routes, the address of the next
|
|
system en route; Otherwise, 0.0.0.0. ."
|
|
::= { mplsVpnVrfRouteEntry 3 }
|
|
|
|
mplsVpnVrfRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value that identifies the local
|
|
interface through which the next hop of this
|
|
route should be reached."
|
|
::= { mplsVpnVrfRouteEntry 4 }
|
|
|
|
mplsVpnVrfRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (1), -- not specified
|
|
local (2), -- local interface
|
|
netmgmt (3), -- static route
|
|
icmp (4), -- result of ICMP Redirect
|
|
|
|
-- the following are all dynamic
|
|
-- routing protocols
|
|
|
|
egp (5), -- Exterior Gateway Protocol
|
|
ggp (6), -- Gateway-Gateway Protocol
|
|
hello (7), -- FuzzBall HelloSpeak
|
|
rip (8), -- Berkeley RIP or RIP-II
|
|
isIs (9), -- Dual IS-IS
|
|
esIs (10), -- ISO 9542
|
|
ciscoIgrp (11), -- Cisco IGRP
|
|
bbnSpfIgp (12), -- BBN SPF IGP
|
|
ospf (13), -- Open Shortest Path First
|
|
bgp (14), -- Border Gateway Protocol
|
|
idpr (15), -- InterDomain Policy Routing
|
|
ciscoEigrp (16) -- Cisco EIGRP
|
|
}
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway rout-
|
|
ing protocols is not intended to imply that
|
|
hosts should support those protocols."
|
|
::= { mplsVpnVrfRouteEntry 5 }
|
|
|
|
mplsVpnVrfRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for this table. It is used according
|
|
to row installation and removal conventions."
|
|
::= { mplsVpnVrfRouteEntry 6 }
|
|
|
|
-- End of MPLS-VPN-MIB
|
|
END
|